Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

 - Logitech HID++ protocol support improvement from Filipe Laíns

 - probe fix for Logitech-G* devices from Hans de Goede

 - a few other small code cleanups and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'
  HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member
  HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member
  HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor
  HID: lg-g15: Do not fail the probe when we fail to disable F# emulation
  HID: appleir: Use devm_kzalloc() instead of kzalloc()
  HID: appleir: Remove unnecessary goto label
  HID: logitech-dj: add support for the static device in the Powerplay mat/receiver
  HID: mcp2221: add usb to i2c-smbus host bridge
  HID: logitech-dj: add debug msg when exporting a HID++ report descriptors
  HID: quirks: Remove ITE 8595 entry from hid_have_special_driver

MAINTAINERS

@@ -10295,6 +10295,13 @@ F:	drivers/net/can/m_can/m_can.c
 F:	drivers/net/can/m_can/m_can.h
 F:	drivers/net/can/m_can/m_can_platform.c
 
+MCP2221A MICROCHIP USB-HID TO I2C BRIDGE DRIVER
+M:	Rishi Gupta <gupt21@gmail.com>
+L:	linux-i2c@vger.kernel.org
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-mcp2221.c
+
 MCP4018 AND MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVERS
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-iio@vger.kernel.org

drivers/hid/Kconfig

@@ -362,6 +362,13 @@ config HID_GFRM
 	---help---
 	Support for Google Fiber TV Box remote controls
 
+config HID_GLORIOUS
+	tristate "Glorious PC Gaming Race mice"
+	depends on HID
+	help
+	  Support for Glorious PC Gaming Race mice such as
+	  the Glorious Model O, O- and D.
+
 config HID_HOLTEK
 	tristate "Holtek HID devices"
 	depends on USB_HID
@@ -1145,6 +1152,16 @@ config HID_ALPS
 	Say Y here if you have a Alps touchpads over i2c-hid or usbhid
 	and want support for its special functionalities.
 
+config HID_MCP2221
+	tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
+	depends on USB_HID && I2C
+	---help---
+	Provides I2C and SMBUS host adapter functionality over USB-HID
+	through MCP2221 device.
+
+	To compile this driver as a module, choose M here: the module
+	will be called hid-mcp2221.ko.
+
 endmenu
 
 endif # HID

drivers/hid/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_HID_ELO)		+= hid-elo.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
 obj-$(CONFIG_HID_GEMBIRD)	+= hid-gembird.o
 obj-$(CONFIG_HID_GFRM)		+= hid-gfrm.o
+obj-$(CONFIG_HID_GLORIOUS)  += hid-glorious.o
 obj-$(CONFIG_HID_GOOGLE_HAMMER)	+= hid-google-hammer.o
 obj-$(CONFIG_HID_GT683R)	+= hid-gt683r.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
@@ -70,6 +71,7 @@ obj-$(CONFIG_HID_LOGITECH_HIDPP)	+= hid-logitech-hidpp.o
 obj-$(CONFIG_HID_MACALLY)	+= hid-macally.o
 obj-$(CONFIG_HID_MAGICMOUSE)	+= hid-magicmouse.o
 obj-$(CONFIG_HID_MALTRON)	+= hid-maltron.o
+obj-$(CONFIG_HID_MCP2221)	+= hid-mcp2221.o
 obj-$(CONFIG_HID_MAYFLASH)	+= hid-mf.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o

drivers/hid/hid-appleir.c

@@ -283,11 +283,9 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
 	int ret;
 	struct appleir *appleir;
 
-	appleir = kzalloc(sizeof(struct appleir), GFP_KERNEL);
+	appleir = devm_kzalloc(&hid->dev, sizeof(struct appleir), GFP_KERNEL);
-	if (!appleir) {
+	if (!appleir)
-		ret = -ENOMEM;
+		return -ENOMEM;
-		goto allocfail;
-	}
 
 	appleir->hid = hid;
 
@@ -313,8 +311,7 @@ static int appleir_probe(struct hid_device *hid, const struct hid_device_id *id)
 
 	return 0;
 fail:
-	kfree(appleir);
+	devm_kfree(&hid->dev, appleir);
-allocfail:
 	return ret;
 }
 
@@ -323,7 +320,6 @@ static void appleir_remove(struct hid_device *hid)
 	struct appleir *appleir = hid_get_drvdata(hid);
 	hid_hw_stop(hid);
 	del_timer_sync(&appleir->key_up_timer);
-	kfree(appleir);
 }
 
 static const struct hid_device_id appleir_devices[] = {

drivers/hid/hid-glorious.c

@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  USB HID driver for Glorious PC Gaming Race
+ *  Glorious Model O, O- and D mice.
+ *
+ *  Copyright (c) 2020 Samuel Čavoj <sammko@sammserver.com>
+ */
+
+/*
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Samuel Čavoj <sammko@sammserver.com>");
+MODULE_DESCRIPTION("HID driver for Glorious PC Gaming Race mice");
+
+/*
+ * Glorious Model O and O- specify the const flag in the consumer input
+ * report descriptor, which leads to inputs being ignored. Fix this
+ * by patching the descriptor.
+ */
+static __u8 *glorious_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	if (*rsize == 213 &&
+		rdesc[84] == 129 && rdesc[112] == 129 && rdesc[140] == 129 &&
+		rdesc[85] == 3   && rdesc[113] == 3   && rdesc[141] == 3) {
+		hid_info(hdev, "patching Glorious Model O consumer control report descriptor\n");
+		rdesc[85] = rdesc[113] = rdesc[141] = \
+			HID_MAIN_ITEM_VARIABLE | HID_MAIN_ITEM_RELATIVE;
+	}
+	return rdesc;
+}
+
+static void glorious_update_name(struct hid_device *hdev)
+{
+	const char *model = "Device";
+
+	switch (hdev->product) {
+	case USB_DEVICE_ID_GLORIOUS_MODEL_O:
+		model = "Model O"; break;
+	case USB_DEVICE_ID_GLORIOUS_MODEL_D:
+		model = "Model D"; break;
+	}
+
+	snprintf(hdev->name, sizeof(hdev->name), "%s %s", "Glorious", model);
+}
+
+static int glorious_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	int ret;
+
+	hdev->quirks |= HID_QUIRK_INPUT_PER_APP;
+
+	ret = hid_parse(hdev);
+	if (ret)
+		return ret;
+
+	glorious_update_name(hdev);
+
+	return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+}
+
+static const struct hid_device_id glorious_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GLORIOUS,
+		USB_DEVICE_ID_GLORIOUS_MODEL_O) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GLORIOUS,
+		USB_DEVICE_ID_GLORIOUS_MODEL_D) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, glorious_devices);
+
+static struct hid_driver glorious_driver = {
+	.name = "glorious",
+	.id_table = glorious_devices,
+	.probe = glorious_probe,
+	.report_fixup = glorious_report_fixup
+};
+
+module_hid_driver(glorious_driver);
+
+MODULE_LICENSE("GPL");

drivers/hid/hid-ids.h

@@ -464,6 +464,10 @@
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_010A 0x010a
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_E100 0xe100
 
+#define USB_VENDOR_ID_GLORIOUS  0x258a
+#define USB_DEVICE_ID_GLORIOUS_MODEL_D 0x0033
+#define USB_DEVICE_ID_GLORIOUS_MODEL_O 0x0036
+
 #define I2C_VENDOR_ID_GOODIX		0x27c6
 #define I2C_DEVICE_ID_GOODIX_01F0	0x01f0
 
@@ -821,6 +825,7 @@
 #define USB_DEVICE_ID_PICK16F1454	0x0042
 #define USB_DEVICE_ID_PICK16F1454_V2	0xf2f7
 #define USB_DEVICE_ID_LUXAFOR		0xf372
+#define USB_DEVICE_ID_MCP2221		0x00dd
 
 #define USB_VENDOR_ID_MICROSOFT		0x045e
 #define USB_DEVICE_ID_SIDEWINDER_GV	0x003b

drivers/hid/hid-lg-g15.c

@@ -803,8 +803,10 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	}
 
 	if (ret < 0) {
-		hid_err(hdev, "Error disabling keyboard emulation for the G-keys\n");
+		hid_err(hdev, "Error %d disabling keyboard emulation for the G-keys, falling back to generic hid-input driver\n",
-		goto error_hw_stop;
+			ret);
+		hid_set_drvdata(hdev, NULL);
+		return 0;
 	}
 
 	/* Get initial brightness levels */

drivers/hid/hid-logitech-dj.c

@@ -16,11 +16,11 @@
 #include <asm/unaligned.h>
 #include "hid-ids.h"
 
-#define DJ_MAX_PAIRED_DEVICES			6
+#define DJ_MAX_PAIRED_DEVICES			7
 #define DJ_MAX_NUMBER_NOTIFS			8
 #define DJ_RECEIVER_INDEX			0
 #define DJ_DEVICE_INDEX_MIN			1
-#define DJ_DEVICE_INDEX_MAX			6
+#define DJ_DEVICE_INDEX_MAX			7
 
 #define DJREPORT_SHORT_LENGTH			15
 #define DJREPORT_LONG_LENGTH			32
@@ -980,6 +980,11 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
 		break;
 	}
 
+	/* custom receiver device (eg. powerplay) */
+	if (hidpp_report->device_index == 7) {
+		workitem.reports_supported |= HIDPP;
+	}
+
 	if (workitem.type == WORKITEM_TYPE_EMPTY) {
 		hid_warn(hdev,
 			 "unusable device of type %s (0x%02x) connected on slot %d",
@@ -1368,6 +1373,8 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 	}
 
 	if (djdev->reports_supported & HIDPP) {
+		dbg_hid("%s: sending a HID++ descriptor, reports_supported: %llx\n",
+			__func__, djdev->reports_supported);
 		rdcat(rdesc, &rsize, hidpp_descriptor,
 		      sizeof(hidpp_descriptor));
 	}

drivers/hid/hid-mcp2221.c

@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MCP2221A - Microchip USB to I2C Host Protocol Bridge
+ *
+ * Copyright (c) 2020, Rishi Gupta <gupt21@gmail.com>
+ *
+ * Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/i2c.h>
+#include "hid-ids.h"
+
+/* Commands codes in a raw output report */
+enum {
+	MCP2221_I2C_WR_DATA = 0x90,
+	MCP2221_I2C_WR_NO_STOP = 0x94,
+	MCP2221_I2C_RD_DATA = 0x91,
+	MCP2221_I2C_RD_RPT_START = 0x93,
+	MCP2221_I2C_GET_DATA = 0x40,
+	MCP2221_I2C_PARAM_OR_STATUS	= 0x10,
+	MCP2221_I2C_SET_SPEED = 0x20,
+	MCP2221_I2C_CANCEL = 0x10,
+};
+
+/* Response codes in a raw input report */
+enum {
+	MCP2221_SUCCESS = 0x00,
+	MCP2221_I2C_ENG_BUSY = 0x01,
+	MCP2221_I2C_START_TOUT = 0x12,
+	MCP2221_I2C_STOP_TOUT = 0x62,
+	MCP2221_I2C_WRADDRL_TOUT = 0x23,
+	MCP2221_I2C_WRDATA_TOUT = 0x44,
+	MCP2221_I2C_WRADDRL_NACK = 0x25,
+	MCP2221_I2C_MASK_ADDR_NACK = 0x40,
+	MCP2221_I2C_WRADDRL_SEND = 0x21,
+	MCP2221_I2C_ADDR_NACK = 0x25,
+	MCP2221_I2C_READ_COMPL = 0x55,
+};
+
+/*
+ * There is no way to distinguish responses. Therefore next command
+ * is sent only after response to previous has been received. Mutex
+ * lock is used for this purpose mainly.
+ */
+struct mcp2221 {
+	struct hid_device *hdev;
+	struct i2c_adapter adapter;
+	struct mutex lock;
+	struct completion wait_in_report;
+	u8 *rxbuf;
+	u8 txbuf[64];
+	int rxbuf_idx;
+	int status;
+	u8 cur_i2c_clk_div;
+};
+
+/*
+ * Default i2c bus clock frequency 400 kHz. Modify this if you
+ * want to set some other frequency (min 50 kHz - max 400 kHz).
+ */
+static uint i2c_clk_freq = 400;
+
+/* Synchronously send output report to the device */
+static int mcp_send_report(struct mcp2221 *mcp,
+					u8 *out_report, size_t len)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmemdup(out_report, len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* mcp2221 uses interrupt endpoint for out reports */
+	ret = hid_hw_output_report(mcp->hdev, buf, len);
+	kfree(buf);
+
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+/*
+ * Send o/p report to the device and wait for i/p report to be
+ * received from the device. If the device does not respond,
+ * we timeout.
+ */
+static int mcp_send_data_req_status(struct mcp2221 *mcp,
+			u8 *out_report, int len)
+{
+	int ret;
+	unsigned long t;
+
+	reinit_completion(&mcp->wait_in_report);
+
+	ret = mcp_send_report(mcp, out_report, len);
+	if (ret)
+		return ret;
+
+	t = wait_for_completion_timeout(&mcp->wait_in_report,
+							msecs_to_jiffies(4000));
+	if (!t)
+		return -ETIMEDOUT;
+
+	return mcp->status;
+}
+
+/* Check pass/fail for actual communication with i2c slave */
+static int mcp_chk_last_cmd_status(struct mcp2221 *mcp)
+{
+	memset(mcp->txbuf, 0, 8);
+	mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+
+	return mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+}
+
+/* Cancels last command releasing i2c bus just in case occupied */
+static int mcp_cancel_last_cmd(struct mcp2221 *mcp)
+{
+	memset(mcp->txbuf, 0, 8);
+	mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+	mcp->txbuf[2] = MCP2221_I2C_CANCEL;
+
+	return mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+}
+
+static int mcp_set_i2c_speed(struct mcp2221 *mcp)
+{
+	int ret;
+
+	memset(mcp->txbuf, 0, 8);
+	mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+	mcp->txbuf[3] = MCP2221_I2C_SET_SPEED;
+	mcp->txbuf[4] = mcp->cur_i2c_clk_div;
+
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+	if (ret) {
+		/* Small delay is needed here */
+		usleep_range(980, 1000);
+		mcp_cancel_last_cmd(mcp);
+	}
+
+	return 0;
+}
+
+/*
+ * An output report can contain minimum 1 and maximum 60 user data
+ * bytes. If the number of data bytes is more then 60, we send it
+ * in chunks of 60 bytes. Last chunk may contain exactly 60 or less
+ * bytes. Total number of bytes is informed in very first report to
+ * mcp2221, from that point onwards it first collect all the data
+ * from host and then send to i2c slave device.
+ */
+static int mcp_i2c_write(struct mcp2221 *mcp,
+				struct i2c_msg *msg, int type, u8 last_status)
+{
+	int ret, len, idx, sent;
+
+	idx = 0;
+	sent  = 0;
+	if (msg->len < 60)
+		len = msg->len;
+	else
+		len = 60;
+
+	do {
+		mcp->txbuf[0] = type;
+		mcp->txbuf[1] = msg->len & 0xff;
+		mcp->txbuf[2] = msg->len >> 8;
+		mcp->txbuf[3] = (u8)(msg->addr << 1);
+
+		memcpy(&mcp->txbuf[4], &msg->buf[idx], len);
+
+		ret = mcp_send_data_req_status(mcp, mcp->txbuf, len + 4);
+		if (ret)
+			return ret;
+
+		usleep_range(980, 1000);
+
+		if (last_status) {
+			ret = mcp_chk_last_cmd_status(mcp);
+			if (ret)
+				return ret;
+		}
+
+		sent = sent + len;
+		if (sent >= msg->len)
+			break;
+
+		idx = idx + len;
+		if ((msg->len - sent) < 60)
+			len = msg->len - sent;
+		else
+			len = 60;
+
+		/*
+		 * Testing shows delay is needed between successive writes
+		 * otherwise next write fails on first-try from i2c core.
+		 * This value is obtained through automated stress testing.
+		 */
+		usleep_range(980, 1000);
+	} while (len > 0);
+
+	return ret;
+}
+
+/*
+ * Device reads all data (0 - 65535 bytes) from i2c slave device and
+ * stores it in device itself. This data is read back from device to
+ * host in multiples of 60 bytes using input reports.
+ */
+static int mcp_i2c_smbus_read(struct mcp2221 *mcp,
+				struct i2c_msg *msg, int type, u16 smbus_addr,
+				u8 smbus_len, u8 *smbus_buf)
+{
+	int ret;
+	u16 total_len;
+
+	mcp->txbuf[0] = type;
+	if (msg) {
+		mcp->txbuf[1] = msg->len & 0xff;
+		mcp->txbuf[2] = msg->len >> 8;
+		mcp->txbuf[3] = (u8)(msg->addr << 1);
+		total_len = msg->len;
+		mcp->rxbuf = msg->buf;
+	} else {
+		mcp->txbuf[1] = smbus_len;
+		mcp->txbuf[2] = 0;
+		mcp->txbuf[3] = (u8)(smbus_addr << 1);
+		total_len = smbus_len;
+		mcp->rxbuf = smbus_buf;
+	}
+
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 4);
+	if (ret)
+		return ret;
+
+	mcp->rxbuf_idx = 0;
+
+	do {
+		memset(mcp->txbuf, 0, 4);
+		mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+
+		ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+		if (ret)
+			return ret;
+
+		ret = mcp_chk_last_cmd_status(mcp);
+		if (ret)
+			return ret;
+
+		usleep_range(980, 1000);
+	} while (mcp->rxbuf_idx < total_len);
+
+	return ret;
+}
+
+static int mcp_i2c_xfer(struct i2c_adapter *adapter,
+				struct i2c_msg msgs[], int num)
+{
+	int ret;
+	struct mcp2221 *mcp = i2c_get_adapdata(adapter);
+
+	hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+
+	mutex_lock(&mcp->lock);
+
+	/* Setting speed before every transaction is required for mcp2221 */
+	ret = mcp_set_i2c_speed(mcp);
+	if (ret)
+		goto exit;
+
+	if (num == 1) {
+		if (msgs->flags & I2C_M_RD) {
+			ret = mcp_i2c_smbus_read(mcp, msgs, MCP2221_I2C_RD_DATA,
+							0, 0, NULL);
+		} else {
+			ret = mcp_i2c_write(mcp, msgs, MCP2221_I2C_WR_DATA, 1);
+		}
+		if (ret)
+			goto exit;
+		ret = num;
+	} else if (num == 2) {
+		/* Ex transaction; send reg address and read its contents */
+		if (msgs[0].addr == msgs[1].addr &&
+			!(msgs[0].flags & I2C_M_RD) &&
+			 (msgs[1].flags & I2C_M_RD)) {
+
+			ret = mcp_i2c_write(mcp, &msgs[0],
+						MCP2221_I2C_WR_NO_STOP, 0);
+			if (ret)
+				goto exit;
+
+			ret = mcp_i2c_smbus_read(mcp, &msgs[1],
+						MCP2221_I2C_RD_RPT_START,
+						0, 0, NULL);
+			if (ret)
+				goto exit;
+			ret = num;
+		} else {
+			dev_err(&adapter->dev,
+				"unsupported multi-msg i2c transaction\n");
+			ret = -EOPNOTSUPP;
+		}
+	} else {
+		dev_err(&adapter->dev,
+			"unsupported multi-msg i2c transaction\n");
+		ret = -EOPNOTSUPP;
+	}
+
+exit:
+	hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+	mutex_unlock(&mcp->lock);
+	return ret;
+}
+
+static int mcp_smbus_write(struct mcp2221 *mcp, u16 addr,
+				u8 command, u8 *buf, u8 len, int type,
+				u8 last_status)
+{
+	int data_len, ret;
+
+	mcp->txbuf[0] = type;
+	mcp->txbuf[1] = len + 1; /* 1 is due to command byte itself */
+	mcp->txbuf[2] = 0;
+	mcp->txbuf[3] = (u8)(addr << 1);
+	mcp->txbuf[4] = command;
+
+	switch (len) {
+	case 0:
+		data_len = 5;
+		break;
+	case 1:
+		mcp->txbuf[5] = buf[0];
+		data_len = 6;
+		break;
+	case 2:
+		mcp->txbuf[5] = buf[0];
+		mcp->txbuf[6] = buf[1];
+		data_len = 7;
+		break;
+	default:
+		memcpy(&mcp->txbuf[5], buf, len);
+		data_len = len + 5;
+	}
+
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, data_len);
+	if (ret)
+		return ret;
+
+	if (last_status) {
+		usleep_range(980, 1000);
+
+		ret = mcp_chk_last_cmd_status(mcp);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int mcp_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	int ret;
+	struct mcp2221 *mcp = i2c_get_adapdata(adapter);
+
+	hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+
+	mutex_lock(&mcp->lock);
+
+	ret = mcp_set_i2c_speed(mcp);
+	if (ret)
+		goto exit;
+
+	switch (size) {
+
+	case I2C_SMBUS_QUICK:
+		if (read_write == I2C_SMBUS_READ)
+			ret = mcp_i2c_smbus_read(mcp, NULL, MCP2221_I2C_RD_DATA,
+						addr, 0, &data->byte);
+		else
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_DATA, 1);
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ)
+			ret = mcp_i2c_smbus_read(mcp, NULL, MCP2221_I2C_RD_DATA,
+						addr, 1, &data->byte);
+		else
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_DATA, 1);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_NO_STOP, 0);
+			if (ret)
+				goto exit;
+
+			ret = mcp_i2c_smbus_read(mcp, NULL,
+						MCP2221_I2C_RD_RPT_START,
+						addr, 1, &data->byte);
+		} else {
+			ret = mcp_smbus_write(mcp, addr, command, &data->byte,
+						1, MCP2221_I2C_WR_DATA, 1);
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_NO_STOP, 0);
+			if (ret)
+				goto exit;
+
+			ret = mcp_i2c_smbus_read(mcp, NULL,
+						MCP2221_I2C_RD_RPT_START,
+						addr, 2, (u8 *)&data->word);
+		} else {
+			ret = mcp_smbus_write(mcp, addr, command,
+						(u8 *)&data->word, 2,
+						MCP2221_I2C_WR_DATA, 1);
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_NO_STOP, 1);
+			if (ret)
+				goto exit;
+
+			mcp->rxbuf_idx = 0;
+			mcp->rxbuf = data->block;
+			mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+			ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+			if (ret)
+				goto exit;
+		} else {
+			if (!data->block[0]) {
+				ret = -EINVAL;
+				goto exit;
+			}
+			ret = mcp_smbus_write(mcp, addr, command, data->block,
+						data->block[0] + 1,
+						MCP2221_I2C_WR_DATA, 1);
+		}
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			ret = mcp_smbus_write(mcp, addr, command, NULL,
+						0, MCP2221_I2C_WR_NO_STOP, 1);
+			if (ret)
+				goto exit;
+
+			mcp->rxbuf_idx = 0;
+			mcp->rxbuf = data->block;
+			mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+			ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+			if (ret)
+				goto exit;
+		} else {
+			if (!data->block[0]) {
+				ret = -EINVAL;
+				goto exit;
+			}
+			ret = mcp_smbus_write(mcp, addr, command,
+						&data->block[1], data->block[0],
+						MCP2221_I2C_WR_DATA, 1);
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		ret = mcp_smbus_write(mcp, addr, command,
+						(u8 *)&data->word,
+						2, MCP2221_I2C_WR_NO_STOP, 0);
+		if (ret)
+			goto exit;
+
+		ret = mcp_i2c_smbus_read(mcp, NULL,
+						MCP2221_I2C_RD_RPT_START,
+						addr, 2, (u8 *)&data->word);
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		ret = mcp_smbus_write(mcp, addr, command, data->block,
+						data->block[0] + 1,
+						MCP2221_I2C_WR_NO_STOP, 0);
+		if (ret)
+			goto exit;
+
+		ret = mcp_i2c_smbus_read(mcp, NULL,
+						MCP2221_I2C_RD_RPT_START,
+						addr, I2C_SMBUS_BLOCK_MAX,
+						data->block);
+		break;
+	default:
+		dev_err(&mcp->adapter.dev,
+			"unsupported smbus transaction size:%d\n", size);
+		ret = -EOPNOTSUPP;
+	}
+
+exit:
+	hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+	mutex_unlock(&mcp->lock);
+	return ret;
+}
+
+static u32 mcp_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C |
+			I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+			I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+			(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_PEC);
+}
+
+static const struct i2c_algorithm mcp_i2c_algo = {
+	.master_xfer = mcp_i2c_xfer,
+	.smbus_xfer = mcp_smbus_xfer,
+	.functionality = mcp_i2c_func,
+};
+
+/* Gives current state of i2c engine inside mcp2221 */
+static int mcp_get_i2c_eng_state(struct mcp2221 *mcp,
+				u8 *data, u8 idx)
+{
+	int ret;
+
+	switch (data[idx]) {
+	case MCP2221_I2C_WRADDRL_NACK:
+	case MCP2221_I2C_WRADDRL_SEND:
+		ret = -ENXIO;
+		break;
+	case MCP2221_I2C_START_TOUT:
+	case MCP2221_I2C_STOP_TOUT:
+	case MCP2221_I2C_WRADDRL_TOUT:
+	case MCP2221_I2C_WRDATA_TOUT:
+		ret = -ETIMEDOUT;
+		break;
+	case MCP2221_I2C_ENG_BUSY:
+		ret = -EAGAIN;
+		break;
+	case MCP2221_SUCCESS:
+		ret = 0x00;
+		break;
+	default:
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+/*
+ * MCP2221 uses interrupt endpoint for input reports. This function
+ * is called by HID layer when it receives i/p report from mcp2221,
+ * which is actually a response to the previously sent command.
+ *
+ * MCP2221A firmware specific return codes are parsed and 0 or
+ * appropriate negative error code is returned. Delayed response
+ * results in timeout error and stray reponses results in -EIO.
+ */
+static int mcp2221_raw_event(struct hid_device *hdev,
+				struct hid_report *report, u8 *data, int size)
+{
+	u8 *buf;
+	struct mcp2221 *mcp = hid_get_drvdata(hdev);
+
+	switch (data[0]) {
+
+	case MCP2221_I2C_WR_DATA:
+	case MCP2221_I2C_WR_NO_STOP:
+	case MCP2221_I2C_RD_DATA:
+	case MCP2221_I2C_RD_RPT_START:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			mcp->status = 0;
+			break;
+		default:
+			mcp->status = mcp_get_i2c_eng_state(mcp, data, 2);
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
+	case MCP2221_I2C_PARAM_OR_STATUS:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			if ((mcp->txbuf[3] == MCP2221_I2C_SET_SPEED) &&
+				(data[3] != MCP2221_I2C_SET_SPEED)) {
+				mcp->status = -EAGAIN;
+				break;
+			}
+			if (data[20] & MCP2221_I2C_MASK_ADDR_NACK) {
+				mcp->status = -ENXIO;
+				break;
+			}
+			mcp->status = mcp_get_i2c_eng_state(mcp, data, 8);
+			break;
+		default:
+			mcp->status = -EIO;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
+	case MCP2221_I2C_GET_DATA:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			if (data[2] == MCP2221_I2C_ADDR_NACK) {
+				mcp->status = -ENXIO;
+				break;
+			}
+			if (!mcp_get_i2c_eng_state(mcp, data, 2)
+				&& (data[3] == 0)) {
+				mcp->status = 0;
+				break;
+			}
+			if (data[3] == 127) {
+				mcp->status = -EIO;
+				break;
+			}
+			if (data[2] == MCP2221_I2C_READ_COMPL) {
+				buf = mcp->rxbuf;
+				memcpy(&buf[mcp->rxbuf_idx], &data[4], data[3]);
+				mcp->rxbuf_idx = mcp->rxbuf_idx + data[3];
+				mcp->status = 0;
+				break;
+			}
+			mcp->status = -EIO;
+			break;
+		default:
+			mcp->status = -EIO;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
+	default:
+		mcp->status = -EIO;
+		complete(&mcp->wait_in_report);
+	}
+
+	return 1;
+}
+
+static int mcp2221_probe(struct hid_device *hdev,
+					const struct hid_device_id *id)
+{
+	int ret;
+	struct mcp2221 *mcp;
+
+	mcp = devm_kzalloc(&hdev->dev, sizeof(*mcp), GFP_KERNEL);
+	if (!mcp)
+		return -ENOMEM;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "can't parse reports\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "can't start hardware\n");
+		return ret;
+	}
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "can't open device\n");
+		goto err_hstop;
+	}
+
+	mutex_init(&mcp->lock);
+	init_completion(&mcp->wait_in_report);
+	hid_set_drvdata(hdev, mcp);
+	mcp->hdev = hdev;
+
+	/* Set I2C bus clock diviser */
+	if (i2c_clk_freq > 400)
+		i2c_clk_freq = 400;
+	if (i2c_clk_freq < 50)
+		i2c_clk_freq = 50;
+	mcp->cur_i2c_clk_div = (12000000 / (i2c_clk_freq * 1000)) - 3;
+
+	mcp->adapter.owner = THIS_MODULE;
+	mcp->adapter.class = I2C_CLASS_HWMON;
+	mcp->adapter.algo = &mcp_i2c_algo;
+	mcp->adapter.retries = 1;
+	mcp->adapter.dev.parent = &hdev->dev;
+	snprintf(mcp->adapter.name, sizeof(mcp->adapter.name),
+			"MCP2221 usb-i2c bridge on hidraw%d",
+			((struct hidraw *)hdev->hidraw)->minor);
+
+	ret = i2c_add_adapter(&mcp->adapter);
+	if (ret) {
+		hid_err(hdev, "can't add usb-i2c adapter: %d\n", ret);
+		goto err_i2c;
+	}
+	i2c_set_adapdata(&mcp->adapter, mcp);
+
+	return 0;
+
+err_i2c:
+	hid_hw_close(mcp->hdev);
+err_hstop:
+	hid_hw_stop(mcp->hdev);
+	return ret;
+}
+
+static void mcp2221_remove(struct hid_device *hdev)
+{
+	struct mcp2221 *mcp = hid_get_drvdata(hdev);
+
+	i2c_del_adapter(&mcp->adapter);
+	hid_hw_close(mcp->hdev);
+	hid_hw_stop(mcp->hdev);
+}
+
+static const struct hid_device_id mcp2221_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2221) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mcp2221_devices);
+
+static struct hid_driver mcp2221_driver = {
+	.name		= "mcp2221",
+	.id_table	= mcp2221_devices,
+	.probe		= mcp2221_probe,
+	.remove		= mcp2221_remove,
+	.raw_event	= mcp2221_raw_event,
+};
+
+/* Register with HID core */
+module_hid_driver(mcp2221_driver);
+
+MODULE_AUTHOR("Rishi Gupta <gupt21@gmail.com>");
+MODULE_DESCRIPTION("MCP2221 Microchip HID USB to I2C master bridge");
+MODULE_LICENSE("GPL v2");

drivers/hid/hid-quirks.c

@@ -398,9 +398,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A0C2) },
 #endif
-#if IS_ENABLED(CONFIG_HID_ITE)
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
-#endif
 #if IS_ENABLED(CONFIG_HID_ICADE)
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
 #endif

drivers/hid/hid-rmi.c

@@ -217,7 +217,6 @@ static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
 		ret = rmi_write_report(hdev, data->writeReport,
 						data->output_report_size);
 		if (ret != data->output_report_size) {
-			clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
 			dev_err(&hdev->dev,
 				"failed to write request output report (%d)\n",
 				ret);

drivers/hid/intel-ish-hid/ishtp/hbm.h

@@ -82,7 +82,7 @@ struct ishtp_msg_hdr {
 
 struct ishtp_bus_message {
 	uint8_t hbm_cmd;
-	uint8_t data[0];
+	uint8_t data[];
 } __packed;
 
 /**

drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h

@@ -214,7 +214,7 @@ struct ishtp_device {
 	const struct ishtp_hw_ops *ops;
 	size_t	mtu;
 	uint32_t	ishtp_msg_hdr;
-	char hw[0] __aligned(sizeof(void *));
+	char hw[] __aligned(sizeof(void *));
 };
 
 static inline unsigned long ishtp_secs_to_jiffies(unsigned long sec)