renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code

Merge drm/drm-next into drm-intel-next-queued

Browse Source 
Moving the base forward since this one was so old.
New base contains fixes that we needed.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This commit is contained in:
Rodrigo Vivi 2020-02-07 17:47:43 -08:00
commit c0f00d270e
1899 changed files with 44900 additions and 22419 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.mailmap
View File

@ -99,6 +99,7 @@ Jacob Shin <Jacob.Shin@amd.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@google.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@motorola.com>
Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk.kim@samsung.com>
Jakub Kicinski <kuba@kernel.org> <jakub.kicinski@netronome.com>
James Bottomley <jejb@mulgrave.(none)>
James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
@ -152,6 +153,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
@ -265,6 +267,7 @@ Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>

13
Documentation/ABI/stable/sysfs-driver-mlxreg-io
View File

@ -29,13 +29,13 @@ Description: This file shows the system fans direction:
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show with which CPLD versions have been burned
on LED board.
on LED or Gearbox board.
The files are read only.
@ -121,6 +121,15 @@ Description: These files show the system reset cause, as following: ComEx
The files are read only.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
Date: November 2018
KernelVersion: 5.0
Contact: Vadim Pasternak <vadimpmellanox.com>
Description: These files show with which CPLD versions have been burned
on LED board.
The files are read only.
Date: June 2019
KernelVersion: 5.3
Contact: Vadim Pasternak <vadimpmellanox.com>

10
Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
View File

@ -1,4 +1,4 @@
What: /sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state
What: /sys/bus/platform/devices/MLNXBF04:00/lifecycle_state
Date: Oct 2019
KernelVersion: 5.5
Contact: "Liming Sun <lsun@mellanox.com>"
@ -10,7 +10,7 @@ Description:
GA Non-Secured - Non-Secure chip and not able to change state
RMA - Return Merchandise Authorization
What: /sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog
What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
Date: Oct 2019
KernelVersion: 5.5
Contact: "Liming Sun <lsun@mellanox.com>"
@ -19,7 +19,7 @@ Description:
to reboot the chip and recover it to the old state if the new
boot partition fails.
What: /sys/bus/platform/devices/MLNXBF04:00/driver/reset_action
What: /sys/bus/platform/devices/MLNXBF04:00/reset_action
Date: Oct 2019
KernelVersion: 5.5
Contact: "Liming Sun <lsun@mellanox.com>"
@ -30,7 +30,7 @@ Description:
emmc - boot from the onchip eMMC
emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
What: /sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action
What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action
Date: Oct 2019
KernelVersion: 5.5
Contact: "Liming Sun <lsun@mellanox.com>"
@ -44,7 +44,7 @@ Description:
swap_emmc - swap the primary / secondary boot partition
none - cancel the action
What: /sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state
What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
Date: Oct 2019
KernelVersion: 5.5
Contact: "Liming Sun <lsun@mellanox.com>"

2
Documentation/admin-guide/devices.txt
View File

@ -319,7 +319,7 @@
182 = /dev/perfctr Performance-monitoring counters
183 = /dev/hwrng Generic random number generator
184 = /dev/cpu/microcode CPU microcode update interface
186 = /dev/atomicps Atomic shapshot of process state data
186 = /dev/atomicps Atomic snapshot of process state data
187 = /dev/irnet IrNET device
188 = /dev/smbusbios SMBus BIOS
189 = /dev/ussp_ctl User space serial port control

19
Documentation/admin-guide/ext4.rst
View File

@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted:
system after its metadata has been committed to the journal.
commit=nrsec (*)
Ext4 can be told to sync all its data and metadata every 'nrsec'
seconds. The default value is 5 seconds. This means that if you lose
your power, you will lose as much as the latest 5 seconds of work (your
filesystem will not be damaged though, thanks to the journaling). This
default value (or any low value) will hurt performance, but it's good
for data-safety. Setting it to 0 will have the same effect as leaving
it at the default (5 seconds). Setting it to very large values will
improve performance.
This setting limits the maximum age of the running transaction to
'nrsec' seconds. The default value is 5 seconds. This means that if
you lose your power, you will lose as much as the latest 5 seconds of
metadata changes (your filesystem will not be damaged though, thanks
to the journaling). This default value (or any low value) will hurt
performance, but it's good for data-safety. Setting it to 0 will have
the same effect as leaving it at the default (5 seconds). Setting it
to very large values will improve performance. Note that due to
delayed allocation even older data can be lost on power failure since
writeback of those data begins only after time set in
/proc/sys/vm/dirty_expire_centisecs.
barrier=<0|1(*)>, barrier(*), nobarrier
This enables/disables the use of write barriers in the jbd code.

2
Documentation/admin-guide/xfs.rst
View File

@ -253,7 +253,7 @@ The following sysctls are available for the XFS filesystem:
pool.
fs.xfs.speculative_prealloc_lifetime
(Units: seconds Min: 1 Default: 300 Max: 86400)
(Units: seconds Min: 1 Default: 300 Max: 86400)
The interval at which the background scanning for inodes
with unused speculative preallocation runs. The scan
removes unused preallocation from clean inodes and releases

10
Documentation/dev-tools/kcov.rst
View File

@ -251,11 +251,11 @@ selectively from different subsystems.
.. code-block:: c
struct kcov_remote_arg {
unsigned trace_mode;
unsigned area_size;
unsigned num_handles;
uint64_t common_handle;
uint64_t handles[0];
__u32 trace_mode;
__u32 area_size;
__u32 num_handles;
__aligned_u64 common_handle;
__aligned_u64 handles[0];
};
#define KCOV_INIT_TRACE _IOR('c', 1, unsigned long)

8
Documentation/dev-tools/kselftest.rst
View File

@ -203,12 +203,12 @@ Test Module
Kselftest tests the kernel from userspace. Sometimes things need
testing from within the kernel, one method of doing this is to create a
test module. We can tie the module into the kselftest framework by
using a shell script test runner. ``kselftest_module.sh`` is designed
using a shell script test runner. ``kselftest/module.sh`` is designed
to facilitate this process. There is also a header file provided to
assist writing kernel modules that are for use with kselftest:
- ``tools/testing/kselftest/kselftest_module.h``
- ``tools/testing/kselftest/kselftest_module.sh``
- ``tools/testing/kselftest/kselftest/module.sh``
How to use
----------
@ -247,7 +247,7 @@ A bare bones test module might look like this:
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "../tools/testing/selftests/kselftest_module.h"
#include "../tools/testing/selftests/kselftest/module.h"
KSTM_MODULE_GLOBALS();
@ -276,7 +276,7 @@ Example test script
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0+
$(dirname $0)/../kselftest_module.sh "foo" test_foo
$(dirname $0)/../kselftest/module.sh "foo" test_foo
Test Harness

1
Documentation/dev-tools/kunit/index.rst
View File

@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel
start
usage
kunit-tool
api/index
faq

57
Documentation/dev-tools/kunit/kunit-tool.rst Normal file
View File

@ -0,0 +1,57 @@
.. SPDX-License-Identifier: GPL-2.0
=================
kunit_tool How-To
=================
What is kunit_tool?
===================
kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building
the Linux kernel as UML (`User Mode Linux
<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing
the test results and displaying them in a user friendly manner.
What is a kunitconfig?
======================
It's just a defconfig that kunit_tool looks for in the base directory.
kunit_tool uses it to generate a .config as you might expect. In addition, it
verifies that the generated .config contains the CONFIG options in the
kunitconfig; the reason it does this is so that it is easy to be sure that a
CONFIG that enables a test actually ends up in the .config.
How do I use kunit_tool?
========================
If a kunitconfig is present at the root directory, all you have to do is:
.. code-block:: bash
./tools/testing/kunit/kunit.py run
However, you most likely want to use it with the following options:
.. code-block:: bash
./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
- ``--timeout`` sets a maximum amount of time to allow tests to run.
- ``--jobs`` sets the number of threads to use to build the kernel.
If you just want to use the defconfig that ships with the kernel, you can
append the ``--defconfig`` flag as well:
.. code-block:: bash
./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig
.. note::
This command is particularly helpful for getting started because it
just works. No kunitconfig needs to be present.
For a list of all the flags supported by kunit_tool, you can run:
.. code-block:: bash
./tools/testing/kunit/kunit.py run --help

26
Documentation/dev-tools/kunit/start.rst
View File

@ -19,21 +19,21 @@ The wrapper can be run with:
.. code-block:: bash
./tools/testing/kunit/kunit.py run
./tools/testing/kunit/kunit.py run --defconfig
Creating a kunitconfig
======================
The Python script is a thin wrapper around Kbuild as such, it needs to be
configured with a ``kunitconfig`` file. This file essentially contains the
For more information on this wrapper (also called kunit_tool) checkout the
:doc:`kunit-tool` page.
Creating a .kunitconfig
=======================
The Python script is a thin wrapper around Kbuild. As such, it needs to be
configured with a ``.kunitconfig`` file. This file essentially contains the
regular Kernel config, with the specific test targets as well.
.. code-block:: bash
git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO
cd $PATH_TO_LINUX_REPO
ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig
You may want to add kunitconfig to your local gitignore.
cp arch/um/configs/kunit_defconfig .kunitconfig
Verifying KUnit Works
---------------------
@ -59,8 +59,8 @@ If everything worked correctly, you should see the following:
followed by a list of tests that are run. All of them should be passing.
.. note::
Because it is building a lot of sources for the first time, the ``Building
kunit kernel`` step may take a while.
Because it is building a lot of sources for the first time, the
``Building KUnit kernel`` step may take a while.
Writing your first test
=======================
@ -148,7 +148,7 @@ and the following to ``drivers/misc/Makefile``:
obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
Now add it to your ``kunitconfig``:
Now add it to your ``.kunitconfig``:
.. code-block:: none
@ -159,7 +159,7 @@ Now you can run the test:
.. code-block:: bash
./tools/testing/kunit/kunit.py
./tools/testing/kunit/kunit.py run
You should see the following failure:

24
Documentation/dev-tools/kunit/usage.rst
View File

@ -16,7 +16,7 @@ Organization of this document
=============================
This document is organized into two main sections: Testing and Isolating
Behavior. The first covers what a unit test is and how to use KUnit to write
Behavior. The first covers what unit tests are and how to use KUnit to write
them. The second covers how to use KUnit to isolate code and make it possible
to unit test code that was otherwise un-unit-testable.
@ -174,13 +174,13 @@ Test Suites
~~~~~~~~~~~
Now obviously one unit test isn't very helpful; the power comes from having
many test cases covering all of your behaviors. Consequently it is common to
have many *similar* tests; in order to reduce duplication in these closely
related tests most unit testing frameworks provide the concept of a *test
suite*, in KUnit we call it a *test suite*; all it is is just a collection of
test cases for a unit of code with a set up function that gets invoked before
every test cases and then a tear down function that gets invoked after every
test case completes.
many test cases covering all of a unit's behaviors. Consequently it is common
to have many *similar* tests; in order to reduce duplication in these closely
related tests most unit testing frameworks - including KUnit - provide the
concept of a *test suite*. A *test suite* is just a collection of test cases
for a unit of code with a set up function that gets invoked before every test
case and then a tear down function that gets invoked after every test case
completes.
Example:
@ -211,7 +211,7 @@ KUnit test framework.
.. note::
A test case will only be run if it is associated with a test suite.
For a more information on these types of things see the :doc:`api/test`.
For more information on these types of things see the :doc:`api/test`.
Isolating Behavior
==================
@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM:
return count;
}
ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count)
ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count)
{
struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent);
@ -454,7 +454,7 @@ KUnit on non-UML architectures
By default KUnit uses UML as a way to provide dependencies for code under test.
Under most circumstances KUnit's usage of UML should be treated as an
implementation detail of how KUnit works under the hood. Nevertheless, there
are instances where being able to run architecture specific code, or test
are instances where being able to run architecture specific code or test
against real hardware is desirable. For these reasons KUnit supports running on
other architectures.
@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture.
.. important::
Always prefer tests that run on UML to tests that only run under a particular
architecture, and always prefer tests that run under QEMU or another easy
(and monitarily free) to obtain software environment to a specific piece of
(and monetarily free) to obtain software environment to a specific piece of
hardware.
Nevertheless, there are still valid reasons to write an architecture or hardware

291
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml Normal file
View File

@ -0,0 +1,291 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Display Engine Backend Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The display engine backend exposes layers and sprites to the system.
properties:
compatible:
enum:
- allwinner,sun4i-a10-display-backend
- allwinner,sun5i-a13-display-backend
- allwinner,sun6i-a31-display-backend
- allwinner,sun7i-a20-display-backend
- allwinner,sun8i-a23-display-backend
- allwinner,sun8i-a33-display-backend
- allwinner,sun9i-a80-display-backend
reg:
minItems: 1
maxItems: 2
items:
- description: Display Backend registers
- description: SAT registers
reg-names:
minItems: 1
maxItems: 2
items:
- const: be
- const: sat
interrupts:
maxItems: 1
clocks:
minItems: 3
maxItems: 4
items:
- description: The backend interface clock
- description: The backend module clock
- description: The backend DRAM clock
- description: The SAT clock
clock-names:
minItems: 3
maxItems: 4
items:
- const: ahb
- const: mod
- const: ram
- const: sat
resets:
minItems: 1
maxItems: 2
items:
- description: The Backend reset line
- description: The SAT reset line
reset-names:
minItems: 1
maxItems: 2
items:
- const: be
- const: sat
# FIXME: This should be made required eventually once every SoC will
# have the MBUS declared.
interconnects:
maxItems: 1
# FIXME: This should be made required eventually once every SoC will
# have the MBUS declared.
interconnect-names:
const: dma-mem
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
if:
properties:
compatible:
contains:
const: allwinner,sun8i-a33-display-backend
then:
properties:
reg:
minItems: 2
reg-names:
minItems: 2
clocks:
minItems: 4
clock-names:
minItems: 4
resets:
minItems: 2
reset-names:
minItems: 2
required:
- reg-names
- reset-names
else:
properties:
reg:
maxItems: 1
reg-names:
maxItems: 1
clocks:
maxItems: 3
clock-names:
maxItems: 3
resets:
maxItems: 1
reset-names:
maxItems: 1
examples:
- |
/*
* This comes from the clock/sun4i-a10-ccu.h and
* reset/sun4i-a10-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_AHB_DE_BE0 42
#define CLK_DRAM_DE_BE0 140
#define CLK_DE_BE0 144
#define RST_DE_BE0 5
display-backend@1e60000 {
compatible = "allwinner,sun4i-a10-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <47>;
clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
<&ccu CLK_DRAM_DE_BE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&fe1_out_be0>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_be0>;
};
};
};
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun8i-a23-a33-ccu.h and
* reset/sun8i-a23-a33-ccu.h headers, but we can't include them
* since it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_DE_BE 40
#define CLK_BUS_SAT 46
#define CLK_DRAM_DE_BE 84
#define CLK_DE_BE 85
#define RST_BUS_DE_BE 21
#define RST_BUS_SAT 27
display-backend@1e60000 {
compatible = "allwinner,sun8i-a33-display-backend";
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
reg-names = "be", "sat";
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
clock-names = "ahb", "mod",
"ram", "sat";
resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
reset-names = "be", "sat";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&fe0_out_be0>;
};
};
port@1 {
reg = <1>;
endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
};
};
...

114
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml Normal file
View File

@ -0,0 +1,114 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The display engine pipeline (and its entry point, since it can be
either directly the backend or the frontend) is represented as an
extra node.
The Allwinner A10 Display pipeline is composed of several components
that are going to be documented below:
For all connections between components up to the TCONs in the
display pipeline, when there are multiple components of the same
type at the same depth, the local endpoint ID must be the same as
the remote component's index. For example, if the remote endpoint is
Frontend 1, then the local endpoint ID must be 1.
Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0
[1] -- -- [1] [1] -- -- [1]
\ / \ /
X X
/ \ / \
[0] -- -- [0] [0] -- -- [0]
Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1
For a two pipeline system such as the one depicted above, the lines
represent the connections between the components, while the numbers
within the square brackets corresponds to the ID of the local endpoint.
The same rule also applies to DE 2.0 mixer-TCON connections:
Mixer 0 [0] ----------- [0] TCON 0
[1] ---- ---- [1]
\ /
X
/ \
[0] ---- ---- [0]
Mixer 1 [1] ----------- [1] TCON 1
properties:
compatible:
enum:
- allwinner,sun4i-a10-display-engine
- allwinner,sun5i-a10s-display-engine
- allwinner,sun5i-a13-display-engine
- allwinner,sun6i-a31-display-engine
- allwinner,sun6i-a31s-display-engine
- allwinner,sun7i-a20-display-engine
- allwinner,sun8i-a23-display-engine
- allwinner,sun8i-a33-display-engine
- allwinner,sun8i-a83t-display-engine
- allwinner,sun8i-h3-display-engine
- allwinner,sun8i-r40-display-engine
- allwinner,sun8i-v3s-display-engine
- allwinner,sun9i-a80-display-engine
- allwinner,sun50i-a64-display-engine
- allwinner,sun50i-h6-display-engine
allwinner,pipelines:
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
maxItems: 2
description: |
Available display engine frontends (DE 1.0) or mixers (DE
2.0/3.0) available.
required:
- compatible
- allwinner,pipelines
additionalProperties: false
if:
properties:
compatible:
contains:
enum:
- allwinner,sun4i-a10-display-engine
- allwinner,sun6i-a31-display-engine
- allwinner,sun6i-a31s-display-engine
- allwinner,sun7i-a20-display-engine
- allwinner,sun8i-a83t-display-engine
- allwinner,sun8i-r40-display-engine
- allwinner,sun9i-a80-display-engine
- allwinner,sun50i-a64-display-engine
then:
properties:
allwinner,pipelines:
minItems: 2
else:
properties:
allwinner,pipelines:
maxItems: 1
examples:
- |
de: display-engine {
compatible = "allwinner,sun4i-a10-display-engine";
allwinner,pipelines = <&fe0>, <&fe1>;
};
...

138
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml Normal file
View File

@ -0,0 +1,138 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Display Engine Frontend Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The display engine frontend does formats conversion, scaling,
deinterlacing and color space conversion.
properties:
compatible:
enum:
- allwinner,sun4i-a10-display-frontend
- allwinner,sun5i-a13-display-frontend
- allwinner,sun6i-a31-display-frontend
- allwinner,sun7i-a20-display-frontend
- allwinner,sun8i-a23-display-frontend
- allwinner,sun8i-a33-display-frontend
- allwinner,sun9i-a80-display-frontend
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: The frontend interface clock
- description: The frontend module clock
- description: The frontend DRAM clock
clock-names:
items:
- const: ahb
- const: mod
- const: ram
# FIXME: This should be made required eventually once every SoC will
# have the MBUS declared.
interconnects:
maxItems: 1
# FIXME: This should be made required eventually once every SoC will
# have the MBUS declared.
interconnect-names:
const: dma-mem
resets:
maxItems: 1
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
required:
- "#address-cells"
- "#size-cells"
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
fe0: display-frontend@1e00000 {
compatible = "allwinner,sun4i-a10-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_DRAM_DE_FE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
fe0_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_fe0>;
};
};
};
};
...

183
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml Normal file
View File

@ -0,0 +1,183 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 HDMI Controller Device Tree Bindings
description: |
The HDMI Encoder supports the HDMI video and audio outputs, and does
CEC. It is one end of the pipeline.
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
compatible:
oneOf:
- const: allwinner,sun4i-a10-hdmi
- const: allwinner,sun5i-a10s-hdmi
- const: allwinner,sun6i-a31-hdmi
- items:
- const: allwinner,sun7i-a20-hdmi
- const: allwinner,sun5i-a10s-hdmi
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
oneOf:
- items:
- description: The HDMI interface clock
- description: The HDMI module clock
- description: The first video PLL
- description: The second video PLL
- items:
- description: The HDMI interface clock
- description: The HDMI module clock
- description: The HDMI DDC clock
- description: The first video PLL
- description: The second video PLL
clock-names:
oneOf:
- items:
- const: ahb
- const: mod
- const: pll-0
- const: pll-1
- items:
- const: ahb
- const: mod
- const: ddc
- const: pll-0
- const: pll-1
resets:
maxItems: 1
dmas:
items:
- description: DDC Transmission DMA Channel
- description: DDC Reception DMA Channel
- description: Audio Transmission DMA Channel
dma-names:
items:
- const: ddc-tx
- const: ddc-rx
- const: audio-tx
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller. Usually an HDMI
connector.
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- dmas
- dma-names
if:
properties:
compatible:
contains:
const: allwinner,sun6i-a31-hdmi
then:
properties:
clocks:
minItems: 5
clock-names:
minItems: 5
required:
- resets
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun4i-a10-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hdmi_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_hdmi>;
};
hdmi_in_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
...

676
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml Normal file
View File

@ -0,0 +1,676 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The TCON acts as a timing controller for RGB, LVDS and TV
interfaces.
properties:
"#clock-cells":
const: 0
compatible:
oneOf:
- const: allwinner,sun4i-a10-tcon
- const: allwinner,sun5i-a13-tcon
- const: allwinner,sun6i-a31-tcon
- const: allwinner,sun6i-a31s-tcon
- const: allwinner,sun7i-a20-tcon
- const: allwinner,sun8i-a23-tcon
- const: allwinner,sun8i-a33-tcon
- const: allwinner,sun8i-a83t-tcon-lcd
- const: allwinner,sun8i-a83t-tcon-tv
- const: allwinner,sun8i-r40-tcon-tv
- const: allwinner,sun8i-v3s-tcon
- const: allwinner,sun9i-a80-tcon-lcd
- const: allwinner,sun9i-a80-tcon-tv
- items:
- enum:
- allwinner,sun50i-a64-tcon-lcd
- const: allwinner,sun8i-a83t-tcon-lcd
- items:
- enum:
- allwinner,sun8i-h3-tcon-tv
- allwinner,sun50i-a64-tcon-tv
- allwinner,sun50i-h6-tcon-tv
- const: allwinner,sun8i-a83t-tcon-tv
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 1
maxItems: 4
clock-names:
minItems: 1
maxItems: 4
clock-output-names:
allOf:
- $ref: /schemas/types.yaml#/definitions/string-array
- maxItems: 1
description:
Name of the LCD pixel clock created.
dmas:
maxItems: 1
resets:
anyOf:
- items:
- description: TCON Reset Line
- items:
- description: TCON Reset Line
- description: TCON LVDS Reset Line
- items:
- description: TCON Reset Line
- description: TCON eDP Reset Line
- items:
- description: TCON Reset Line
- description: TCON eDP Reset Line
- description: TCON LVDS Reset Line
reset-names:
oneOf:
- const: lcd
- items:
- const: lcd
- const: lvds
- items:
- const: lcd
- const: edp
- items:
- const: lcd
- const: edp
- const: lvds
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
patternProperties:
"^endpoint(@[0-9])$":
type: object
properties:
allwinner,tcon-channel:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
TCON can have 1 or 2 channels, usually with the
first channel being used for the panels interfaces
(RGB, LVDS, etc.), and the second being used for the
outputs that require another controller (TV Encoder,
HDMI, etc.).
If that property is present, specifies the TCON
channel the endpoint is associated to. If that
property is not present, the endpoint number will be
used as the channel number.
unevaluatedProperties: true
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun4i-a10-tcon
- allwinner,sun5i-a13-tcon
- allwinner,sun7i-a20-tcon
then:
properties:
clocks:
minItems: 3
clock-names:
items:
- const: ahb
- const: tcon-ch0
- const: tcon-ch1
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun6i-a31-tcon
- allwinner,sun6i-a31s-tcon
then:
properties:
clocks:
minItems: 4
clock-names:
items:
- const: ahb
- const: tcon-ch0
- const: tcon-ch1
- const: lvds-alt
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-a23-tcon
- allwinner,sun8i-a33-tcon
then:
properties:
clocks:
minItems: 3
clock-names:
items:
- const: ahb
- const: tcon-ch0
- const: lvds-alt
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-a83t-tcon-lcd
- allwinner,sun8i-v3s-tcon
- allwinner,sun9i-a80-tcon-lcd
then:
properties:
clocks:
minItems: 2
clock-names:
items:
- const: ahb
- const: tcon-ch0
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-a83t-tcon-tv
- allwinner,sun8i-r40-tcon-tv
- allwinner,sun9i-a80-tcon-tv
then:
properties:
clocks:
minItems: 2
clock-names:
items:
- const: ahb
- const: tcon-ch1
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun5i-a13-tcon
- allwinner,sun6i-a31-tcon
- allwinner,sun6i-a31s-tcon
- allwinner,sun7i-a20-tcon
- allwinner,sun8i-a23-tcon
- allwinner,sun8i-a33-tcon
- allwinner,sun8i-v3s-tcon
- allwinner,sun9i-a80-tcon-lcd
- allwinner,sun4i-a10-tcon
- allwinner,sun8i-a83t-tcon-lcd
then:
required:
- "#clock-cells"
- clock-output-names
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun6i-a31-tcon
- allwinner,sun6i-a31s-tcon
- allwinner,sun8i-a23-tcon
- allwinner,sun8i-a33-tcon
- allwinner,sun8i-a83t-tcon-lcd
then:
properties:
resets:
minItems: 2
reset-names:
items:
- const: lcd
- const: lvds
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun9i-a80-tcon-lcd
then:
properties:
resets:
minItems: 3
reset-names:
items:
- const: lcd
- const: edp
- const: lvds
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun9i-a80-tcon-tv
then:
properties:
resets:
minItems: 2
reset-names:
items:
- const: lcd
- const: edp
- if:
properties:
compatible:
contains:
enum:
- allwinner,sun4i-a10-tcon
- allwinner,sun5i-a13-tcon
- allwinner,sun6i-a31-tcon
- allwinner,sun6i-a31s-tcon
- allwinner,sun7i-a20-tcon
- allwinner,sun8i-a23-tcon
- allwinner,sun8i-a33-tcon
then:
required:
- dmas
examples:
- |
#include <dt-bindings/dma/sun4i-a10.h>
/*
* This comes from the clock/sun4i-a10-ccu.h and
* reset/sun4i-a10-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_AHB_LCD0 56
#define CLK_TCON0_CH0 149
#define CLK_TCON0_CH1 155
#define RST_TCON0 11
lcd-controller@1c0c000 {
compatible = "allwinner,sun4i-a10-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
resets = <&ccu RST_TCON0>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_tcon0>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
allwinner,tcon-channel = <1>;
};
};
};
};
#undef CLK_AHB_LCD0
#undef CLK_TCON0_CH0
#undef CLK_TCON0_CH1
#undef RST_TCON0
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun6i-a31-ccu.h and
* reset/sun6i-a31-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_PLL_MIPI 15
#define CLK_AHB1_LCD0 47
#define CLK_LCD0_CH0 127
#define CLK_LCD0_CH1 129
#define RST_AHB1_LCD0 27
#define RST_AHB1_LVDS 41
lcd-controller@1c0c000 {
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 11>;
resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>;
reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_LCD0_CH0>,
<&ccu CLK_LCD0_CH1>,
<&ccu CLK_PLL_MIPI>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1",
"lvds-alt";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&drc0_out_tcon0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_out_tcon0>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
allwinner,tcon-channel = <1>;
};
};
};
};
#undef CLK_PLL_MIPI
#undef CLK_AHB1_LCD0
#undef CLK_LCD0_CH0
#undef CLK_LCD0_CH1
#undef RST_AHB1_LCD0
#undef RST_AHB1_LVDS
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun9i-a80-ccu.h and
* reset/sun9i-a80-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_LCD0 102
#define CLK_LCD0 58
#define RST_BUS_LCD0 22
#define RST_BUS_EDP 24
#define RST_BUS_LVDS 25
lcd-controller@3c00000 {
compatible = "allwinner,sun9i-a80-tcon-lcd";
reg = <0x03c00000 0x10000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
clock-names = "ahb", "tcon-ch0";
resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "edp", "lvds";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&drc0_out_tcon0>;
};
};
port@1 {
reg = <1>;
};
};
};
#undef CLK_BUS_TCON0
#undef CLK_TCON0
#undef RST_BUS_TCON0
#undef RST_BUS_EDP
#undef RST_BUS_LVDS
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun8i-a83t-ccu.h and
* reset/sun8i-a83t-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_TCON0 36
#define CLK_TCON0 85
#define RST_BUS_TCON0 22
#define RST_BUS_LVDS 31
lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-a83t-tcon-lcd";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&mixer1_out_tcon0>;
};
};
port@1 {
reg = <1>;
};
};
};
#undef CLK_BUS_TCON0
#undef CLK_TCON0
#undef RST_BUS_TCON0
#undef RST_BUS_LVDS
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun8i-r40-ccu.h and
* reset/sun8i-r40-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_TCON_TV0 73
#define RST_BUS_TCON_TV0 49
tcon_tv0: lcd-controller@1c73000 {
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
};
endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
};
};
tcon_tv0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
};
};
};
};
#undef CLK_BUS_TCON_TV0
#undef RST_BUS_TCON_TV0
...

62
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml Normal file
View File

@ -0,0 +1,62 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 TV Encoder Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
compatible:
const: allwinner,sun4i-a10-tv-encoder
reg:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
port:
type: object
description:
A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoint, usually coming from the
associated TCON.
required:
- compatible
- reg
- clocks
- resets
- port
additionalProperties: false
examples:
- |
tve0: tv-encoder@1c0a000 {
compatible = "allwinner,sun4i-a10-tv-encoder";
reg = <0x01c0a000 0x1000>;
clocks = <&ahb_gates 34>;
resets = <&tcon_ch0_clk 0>;
port {
#address-cells = <1>;
#size-cells = <0>;
tve0_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_tve0>;
};
};
};
...

138
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml Normal file
View File

@ -0,0 +1,138 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The DRC (Dynamic Range Controller) allows to dynamically adjust
pixel brightness/contrast based on histogram measurements for LCD
content adaptive backlight control.
properties:
compatible:
enum:
- allwinner,sun6i-a31-drc
- allwinner,sun6i-a31s-drc
- allwinner,sun8i-a23-drc
- allwinner,sun8i-a33-drc
- allwinner,sun9i-a80-drc
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: The DRC interface clock
- description: The DRC module clock
- description: The DRC DRAM clock
clock-names:
items:
- const: ahb
- const: mod
- const: ram
resets:
maxItems: 1
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
drc0: drc@1e70000 {
compatible = "allwinner,sun6i-a31-drc";
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
<&ccu CLK_DRAM_DRC0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_AHB1_DRC0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
drc0_in: port@0 {
reg = <0>;
drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
drc0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_drc0>;
};
drc0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc0>;
};
};
};
};
...

118
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml Normal file
View File

@ -0,0 +1,118 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
compatible:
enum:
- allwinner,sun8i-a83t-de2-mixer-0
- allwinner,sun8i-a83t-de2-mixer-1
- allwinner,sun8i-h3-de2-mixer-0
- allwinner,sun8i-r40-de2-mixer-0
- allwinner,sun8i-r40-de2-mixer-1
- allwinner,sun8i-v3s-de2-mixer
- allwinner,sun50i-a64-de2-mixer-0
- allwinner,sun50i-a64-de2-mixer-1
- allwinner,sun50i-h6-de3-mixer-0
reg:
maxItems: 1
clocks:
items:
- description: The mixer interface clock
- description: The mixer module clock
clock-names:
items:
- const: bus
- const: mod
resets:
maxItems: 1
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
required:
- "#address-cells"
- "#size-cells"
- port@1
additionalProperties: false
required:
- compatible
- reg
- clocks
- clock-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-de2.h>
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-a83t-de2-mixer-0";
reg = <0x01100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mixer0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
mixer0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_mixer0>;
};
};
};
};
...

273
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml Normal file
View File

@ -0,0 +1,273 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
description: |
The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
IP with Allwinner\'s own PHY IP. It supports audio and video outputs
and CEC.
These DT bindings follow the Synopsys DWC HDMI TX bindings defined
in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
the following device-specific properties.
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
"#phy-cells":
const: 0
compatible:
oneOf:
- const: allwinner,sun8i-a83t-dw-hdmi
- const: allwinner,sun50i-h6-dw-hdmi
- items:
- enum:
- allwinner,sun8i-h3-dw-hdmi
- allwinner,sun8i-r40-dw-hdmi
- allwinner,sun50i-a64-dw-hdmi
- const: allwinner,sun8i-a83t-dw-hdmi
reg:
maxItems: 1
reg-io-width:
const: 1
interrupts:
maxItems: 1
clocks:
minItems: 3
maxItems: 6
items:
- description: Bus Clock
- description: Register Clock
- description: TMDS Clock
- description: HDMI CEC Clock
- description: HDCP Clock
- description: HDCP Bus Clock
clock-names:
minItems: 3
maxItems: 6
items:
- const: iahb
- const: isfr
- const: tmds
- const: cec
- const: hdcp
- const: hdcp-bus
resets:
minItems: 1
maxItems: 2
items:
- description: HDMI Controller Reset
- description: HDCP Reset
reset-names:
minItems: 1
maxItems: 2
items:
- const: ctrl
- const: hdcp
phys:
maxItems: 1
description:
Phandle to the DWC HDMI PHY.
phy-names:
const: phy
hvcc-supply:
description:
The VCC power supply of the controller
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller. Usually the associated
TCON.
port@1:
type: object
description: |
Output endpoints of the controller. Usually an HDMI
connector.
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- reg-io-width
- interrupts
- clocks
- clock-names
- resets
- reset-names
- phys
- phy-names
- ports
if:
properties:
compatible:
contains:
enum:
- allwinner,sun50i-h6-dw-hdmi
then:
properties:
clocks:
minItems: 6
clock-names:
minItems: 6
resets:
minItems: 2
reset-names:
minItems: 2
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun8i-a83t-ccu.h and
* reset/sun8i-a83t-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_HDMI 39
#define CLK_HDMI 93
#define CLK_HDMI_SLOW 94
#define RST_BUS_HDMI1 26
hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&tcon1_out_hdmi>;
};
};
port@1 {
reg = <1>;
};
};
};
/* Cleanup after ourselves */
#undef CLK_BUS_HDMI
#undef CLK_HDMI
#undef CLK_HDMI_SLOW
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*
* This comes from the clock/sun50i-h6-ccu.h and
* reset/sun50i-h6-ccu.h headers, but we can't include them since
* it would trigger a bunch of warnings for redefinitions of
* symbols with the other example.
*/
#define CLK_BUS_HDMI 126
#define CLK_BUS_HDCP 137
#define CLK_HDMI 123
#define CLK_HDMI_SLOW 124
#define CLK_HDMI_CEC 125
#define CLK_HDCP 136
#define RST_BUS_HDMI_SUB 57
#define RST_BUS_HDCP 62
hdmi@6000000 {
compatible = "allwinner,sun50i-h6-dw-hdmi";
reg = <0x06000000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
<&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
"hdcp-bus";
resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
reset-names = "ctrl", "hdcp";
phys = <&hdmi_phy>;
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
};
};
port@1 {
reg = <1>;
};
};
};
...

117
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml Normal file
View File

@ -0,0 +1,117 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A83t HDMI PHY Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
"#phy-cells":
const: 0
compatible:
enum:
- allwinner,sun8i-a83t-hdmi-phy
- allwinner,sun8i-h3-hdmi-phy
- allwinner,sun8i-r40-hdmi-phy
- allwinner,sun50i-a64-hdmi-phy
- allwinner,sun50i-h6-hdmi-phy
reg:
maxItems: 1
clocks:
minItems: 2
maxItems: 4
items:
- description: Bus Clock
- description: Module Clock
- description: Parent of the PHY clock
- description: Second possible parent of the PHY clock
clock-names:
minItems: 2
maxItems: 4
items:
- const: bus
- const: mod
- const: pll-0
- const: pll-1
resets:
maxItems: 1
reset-names:
const: phy
required:
- compatible
- reg
- clocks
- clock-names
- resets
- reset-names
if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-r40-hdmi-phy
then:
properties:
clocks:
minItems: 4
clock-names:
minItems: 4
else:
if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-h3-hdmi-phy
- allwinner,sun50i-a64-hdmi-phy
then:
properties:
clocks:
minItems: 3
clock-names:
minItems: 3
else:
properties:
clocks:
maxItems: 2
clock-names:
maxItems: 2
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun8i-a83t-ccu.h>
#include <dt-bindings/reset/sun8i-a83t-ccu.h>
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-a83t-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
...

382
Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml Normal file
View File

@ -0,0 +1,382 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner R40 TCON TOP Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
TCON TOPs main purpose is to configure whole display pipeline. It
determines relationships between mixers and TCONs, selects source
TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV
encoder clock source and contains additional TV TCON and DSI gates.
It allows display pipeline to be configured in very different ways:
/ LCD0/LVDS0
/ [0] TCON-LCD0
| \ MIPI DSI
mixer0 |
\ / [1] TCON-LCD1 - LCD1/LVDS1
TCON-TOP
/ \ [2] TCON-TV0 [0] - TVE0/RGB
mixer1 | \
| TCON-TOP - HDMI
| /
\ [3] TCON-TV1 [1] - TVE1/RGB
Note that both TCON TOP references same physical unit. Both mixers
can be connected to any TCON. Not all TCON TOP variants support all
features.
properties:
"#clock-cells":
const: 1
compatible:
enum:
- allwinner,sun8i-r40-tcon-top
- allwinner,sun50i-h6-tcon-top
reg:
maxItems: 1
clocks:
minItems: 2
maxItems: 6
items:
- description: The TCON TOP interface clock
- description: The TCON TOP TV0 clock
- description: The TCON TOP TVE0 clock
- description: The TCON TOP TV1 clock
- description: The TCON TOP TVE1 clock
- description: The TCON TOP MIPI DSI clock
clock-names:
minItems: 2
maxItems: 6
items:
- const: bus
- const: tcon-tv0
- const: tve0
- const: tcon-tv1
- const: tve1
- const: dsi
clock-output-names:
minItems: 1
maxItems: 3
description: >
The first item is the name of the clock created for the TV0
channel, the second item is the name of the TCON TV1 channel
clock and the third one is the name of the DSI channel clock.
resets:
maxItems: 1
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
All ports should have only one endpoint connected to
remote endpoint.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoint for Mixer 0 mux.
port@1:
type: object
description: |
Output endpoint for Mixer 0 mux
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
reg: true
patternProperties:
"^endpoint@[0-9]$":
type: object
properties:
reg:
description: |
ID of the target TCON
required:
- reg
required:
- "#address-cells"
- "#size-cells"
additionalProperties: false
port@2:
type: object
description: |
Input endpoint for Mixer 1 mux.
port@3:
type: object
description: |
Output endpoint for Mixer 1 mux
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
reg: true
patternProperties:
"^endpoint@[0-9]$":
type: object
properties:
reg:
description: |
ID of the target TCON
required:
- reg
required:
- "#address-cells"
- "#size-cells"
additionalProperties: false
port@4:
type: object
description: |
Input endpoint for HDMI mux.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
reg: true
patternProperties:
"^endpoint@[0-9]$":
type: object
properties:
reg:
description: |
ID of the target TCON
required:
- reg
required:
- "#address-cells"
- "#size-cells"
additionalProperties: false
port@5:
type: object
description: |
Output endpoint for HDMI mux
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
- port@4
- port@5
additionalProperties: false
required:
- "#clock-cells"
- compatible
- reg
- clocks
- clock-names
- clock-output-names
- resets
- ports
additionalProperties: false
if:
properties:
compatible:
contains:
const: allwinner,sun50i-h6-tcon-top
then:
properties:
clocks:
maxItems: 2
clock-output-names:
maxItems: 1
else:
properties:
clocks:
minItems: 6
clock-output-names:
minItems: 3
ports:
required:
- port@2
- port@3
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
tcon_top: tcon-top@1c70000 {
compatible = "allwinner,sun8i-r40-tcon-top";
reg = <0x01c70000 0x1000>;
clocks = <&ccu CLK_BUS_TCON_TOP>,
<&ccu CLK_TCON_TV0>,
<&ccu CLK_TVE0>,
<&ccu CLK_TCON_TV1>,
<&ccu CLK_TVE1>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus",
"tcon-tv0",
"tve0",
"tcon-tv1",
"tve1",
"dsi";
clock-output-names = "tcon-top-tv0",
"tcon-top-tv1",
"tcon-top-dsi";
resets = <&ccu RST_BUS_TCON_TOP>;
#clock-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
reg = <0>;
tcon_top_mixer0_in_mixer0: endpoint {
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
tcon_top_mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
};
tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
};
};
tcon_top_mixer1_in: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
tcon_top_mixer1_in_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&mixer1_out_tcon_top>;
};
};
tcon_top_mixer1_out: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
};
tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
};
};
tcon_top_hdmi_in: port@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_tv0_out_tcon_top>;
};
tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_tv1_out_tcon_top>;
};
};
tcon_top_hdmi_out: port@5 {
reg = <5>;
tcon_top_hdmi_out_hdmi: endpoint {
remote-endpoint = <&hdmi_in_tcon_top>;
};
};
};
};
...

133
Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml Normal file
View File

@ -0,0 +1,133 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
can sharpen the display content in both luma and chroma channels.
properties:
compatible:
const: allwinner,sun9i-a80-deu
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: The DEU interface clock
- description: The DEU module clock
- description: The DEU DRAM clock
clock-names:
items:
- const: ahb
- const: mod
- const: ram
resets:
maxItems: 1
ports:
type: object
description: |
A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
"#address-cells":
const: 1
"#size-cells":
const: 0
port@0:
type: object
description: |
Input endpoints of the controller.
port@1:
type: object
description: |
Output endpoints of the controller.
required:
- "#address-cells"
- "#size-cells"
- port@0
- port@1
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun9i-a80-de.h>
#include <dt-bindings/reset/sun9i-a80-de.h>
deu0: deu@3300000 {
compatible = "allwinner,sun9i-a80-deu";
reg = <0x03300000 0x40000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&de_clocks CLK_BUS_DEU0>,
<&de_clocks CLK_IEP_DEU0>,
<&de_clocks CLK_DRAM_DEU0>;
clock-names = "ahb",
"mod",
"ram";
resets = <&de_clocks RST_DEU0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
deu0_in: port@0 {
reg = <0>;
deu0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_deu0>;
};
};
deu0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
deu0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_deu0>;
};
deu0_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_deu0>;
};
};
};
};
...

4
Documentation/devicetree/bindings/display/msm/dpu.txt
View File

@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
MDSS:
Required properties:
- compatible: "qcom,sdm845-mdss"
- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
- reg: physical base address and length of contoller's registers.
- reg-names: register region names. The following region is required:
* "mdss"
@ -41,7 +41,7 @@ Optional properties:
MDP:
Required properties:
- compatible: "qcom,sdm845-dpu"
- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
- reg: physical base address and length of controller's registers.
- reg-names : register region names. The following region is required:
* "mdp"

9
Documentation/devicetree/bindings/display/msm/gpu.txt
View File

@ -23,13 +23,18 @@ Required properties:
- iommus: optional phandle to an adreno iommu instance
- operating-points-v2: optional phandle to the OPP operating points
- interconnects: optional phandle to an interconnect provider. See
../interconnect/interconnect.txt for details.
../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
will have two paths; all others will have one path.
- interconnect-names: The names of the interconnect paths that correspond to the
interconnects property. Values must be gfx-mem and ocmem.
- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
control the power for the GPU. Applicable targets:
- qcom,adreno-630.2
- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
points to reserved memory to store the zap shader that can be used to help
bring the GPU out of secure mode.
- firmware-name: optional property of the 'zap-shader' node, listing the
relative path of the device specific zap firmware.
Example 3xx/4xx/a5xx:
@ -76,11 +81,13 @@ Example a6xx (with GMU):
operating-points-v2 = <&gpu_opp_table>;
interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
interconnect-names = "gfx-mem";
qcom,gmu = <&gmu>;
zap-shader {
memory-region = <&zap_shader_region>;
firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
};
};
};

42
Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
View File

@ -1,42 +0,0 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/ampire,am-480272h3tmqw-t01h.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
maintainers:
- Yannick Fertre <yannick.fertre@st.com>
- Thierry Reding <treding@nvidia.com>
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
const: ampire,am-480272h3tmqw-t01h
power-supply: true
enable-gpios: true
backlight: true
port: true
required:
- compatible
additionalProperties: false
examples:
- |
panel_rgb: panel {
compatible = "ampire,am-480272h3tmqw-t01h";
enable-gpios = <&gpioa 8 1>;
port {
panel_in_rgb: endpoint {
remote-endpoint = <&controller_out_rgb>;
};
};
};
...

7
Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt
View File

@ -1,7 +0,0 @@
Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
Required properties:
- compatible: should be "ampire,am800480r3tmqwa1h"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

12
Documentation/devicetree/bindings/display/panel/giantplus,gpm940b0.txt
View File

@ -1,12 +0,0 @@
GiantPlus 3.0" (320x240 pixels) 24-bit TFT LCD panel
Required properties:
- compatible: should be "giantplus,gpm940b0"
- power-supply: as specified in the base binding
Optional properties:
- backlight: as specified in the base binding
- enable-gpios: as specified in the base binding
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

69
Documentation/devicetree/bindings/display/panel/panel-simple.yaml Normal file
View File

@ -0,0 +1,69 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Simple panels with one power supply
maintainers:
- Thierry Reding <thierry.reding@gmail.com>
- Sam Ravnborg <sam@ravnborg.org>
description: |
This binding file is a collection of the simple (dumb) panels that
requires only a single power-supply.
There are optionally a backlight and an enable GPIO.
The panel may use an OF graph binding for the association to the display,
or it may be a direct child node of the display.
If the panel is more advanced a dedicated binding file is required.
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
enum:
# compatible must be listed in alphabetical order, ordered by compatible.
# The description in the comment is mandatory for each compatible.
# Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
- ampire,am-480272h3tmqw-t01h
# Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
- ampire,am800480r3tmqwa1h
# AUO B116XAK01 eDP TFT LCD panel
- auo,b116xa01
# BOE NV140FHM-N49 14.0" FHD a-Si FT panel
- boe,nv140fhmn49
# GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
- giantplus,gpm940b0
# Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
- satoz,sat050at40h12r2
# Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
- sharp,ls020b1dd01d
backlight: true
enable-gpios: true
port: true
power-supply: true
additionalProperties: false
required:
- compatible
- power-supply
examples:
- |
panel_rgb: panel-rgb {
compatible = "ampire,am-480272h3tmqw-t01h";
power-supply = <&vcc_lcd_reg>;
port {
panel_in_rgb: endpoint {
remote-endpoint = <&ltdc_out_rgb>;
};
};
};

12
Documentation/devicetree/bindings/display/panel/sharp,ls020b1dd01d.txt
View File

@ -1,12 +0,0 @@
Sharp 2.0" (240x160 pixels) 16-bit TFT LCD panel
Required properties:
- compatible: should be "sharp,ls020b1dd01d"
- power-supply: as specified in the base binding
Optional properties:
- backlight: as specified in the base binding
- enable-gpios: as specified in the base binding
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

637
Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
View File

@ -1,637 +0,0 @@
Allwinner A10 Display Pipeline
==============================
The Allwinner A10 Display pipeline is composed of several components
that are going to be documented below:
For all connections between components up to the TCONs in the display
pipeline, when there are multiple components of the same type at the
same depth, the local endpoint ID must be the same as the remote
component's index. For example, if the remote endpoint is Frontend 1,
then the local endpoint ID must be 1.
Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0
[1] -- -- [1] [1] -- -- [1]
\ / \ /
X X
/ \ / \
[0] -- -- [0] [0] -- -- [0]
Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1
For a two pipeline system such as the one depicted above, the lines
represent the connections between the components, while the numbers
within the square brackets corresponds to the ID of the local endpoint.
The same rule also applies to DE 2.0 mixer-TCON connections:
Mixer 0 [0] ----------- [0] TCON 0
[1] ---- ---- [1]
\ /
X
/ \
[0] ---- ---- [0]
Mixer 1 [1] ----------- [1] TCON 1
HDMI Encoder
------------
The HDMI Encoder supports the HDMI video and audio outputs, and does
CEC. It is one end of the pipeline.
Required properties:
- compatible: value must be one of:
* allwinner,sun4i-a10-hdmi
* allwinner,sun5i-a10s-hdmi
* allwinner,sun6i-a31-hdmi
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the HDMI encoder
* ahb: the HDMI interface clock
* mod: the HDMI module clock
* ddc: the HDMI ddc clock (A31 only)
* pll-0: the first video PLL
* pll-1: the second video PLL
- clock-names: the clock names mentioned above
- resets: phandle to the reset control for the HDMI encoder (A31 only)
- dmas: phandles to the DMA channels used by the HDMI encoder
* ddc-tx: The channel for DDC transmission
* ddc-rx: The channel for DDC reception
* audio-tx: The channel used for audio transmission
- dma-names: the channel names mentioned above
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoint. The second should be the
output, usually to an HDMI connector.
DWC HDMI TX Encoder
-------------------
The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
following device-specific properties.
Required properties:
- compatible: value must be one of:
* "allwinner,sun8i-a83t-dw-hdmi"
* "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"
* "allwinner,sun50i-h6-dw-hdmi"
- reg: base address and size of memory-mapped region
- reg-io-width: See dw_hdmi.txt. Shall be 1.
- interrupts: HDMI interrupt number
- clocks: phandles to the clocks feeding the HDMI encoder
* iahb: the HDMI bus clock
* isfr: the HDMI register clock
* tmds: TMDS clock
* cec: HDMI CEC clock (H6 only)
* hdcp: HDCP clock (H6 only)
* hdcp-bus: HDCP bus clock (H6 only)
- clock-names: the clock names mentioned above
- resets:
* ctrl: HDMI controller reset
* hdcp: HDCP reset (H6 only)
- reset-names: reset names mentioned above
- phys: phandle to the DWC HDMI PHY
- phy-names: must be "phy"
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoint. The second should be the
output, usually to an HDMI connector.
Optional properties:
- hvcc-supply: the VCC power supply of the controller
DWC HDMI PHY
------------
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-hdmi-phy
* allwinner,sun8i-h3-hdmi-phy
* allwinner,sun8i-r40-hdmi-phy
* allwinner,sun50i-a64-hdmi-phy
* allwinner,sun50i-h6-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
* mod: the HDMI PHY module clock
- clock-names: the clock names mentioned above
- resets: phandle to the reset controller driving the PHY
- reset-names: must be "phy"
H3, A64 and R40 HDMI PHY require additional clocks:
- pll-0: parent of phy clock
- pll-1: second possible phy clock parent (A64/R40 only)
TV Encoder
----------
The TV Encoder supports the composite and VGA output. It is one end of
the pipeline.
Required properties:
- compatible: value should be "allwinner,sun4i-a10-tv-encoder".
- reg: base address and size of memory-mapped region
- clocks: the clocks driving the TV encoder
- resets: phandle to the reset controller driving the encoder
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoint.
TCON
----
The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
Required properties:
- compatible: value must be either:
* allwinner,sun4i-a10-tcon
* allwinner,sun5i-a13-tcon
* allwinner,sun6i-a31-tcon
* allwinner,sun6i-a31s-tcon
* allwinner,sun7i-a20-tcon
* allwinner,sun8i-a23-tcon
* allwinner,sun8i-a33-tcon
* allwinner,sun8i-a83t-tcon-lcd
* allwinner,sun8i-a83t-tcon-tv
* allwinner,sun8i-r40-tcon-tv
* allwinner,sun8i-v3s-tcon
* allwinner,sun9i-a80-tcon-lcd
* allwinner,sun9i-a80-tcon-tv
* "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd"
* "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv"
* allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the TCON.
- 'ahb': the interface clocks
- 'tcon-ch0': The clock driving the TCON channel 0, if supported
- resets: phandles to the reset controllers driving the encoder
- "lcd": the reset line for the TCON
- "edp": the reset line for the eDP block (A80 only)
- clock-names: the clock names mentioned above
- reset-names: the reset names mentioned above
- clock-output-names: Name of the pixel clock created, if TCON supports
channel 0.
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoint, the second one the output
The output may have multiple endpoints. TCON can have 1 or 2 channels,
usually with the first channel being used for the panels interfaces
(RGB, LVDS, etc.), and the second being used for the outputs that
require another controller (TV Encoder, HDMI, etc.). The endpoints
will take an extra property, allwinner,tcon-channel, to specify the
channel the endpoint is associated to. If that property is not
present, the endpoint number will be used as the channel number.
For TCONs with channel 0, there is one more clock required:
- 'tcon-ch0': The clock driving the TCON channel 0
For TCONs with channel 1, there is one more clock required:
- 'tcon-ch1': The clock driving the TCON channel 1
When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found
in A13, H3, H5 and V3s SoCs), you need one more reset line:
- 'lvds': The reset line driving the LVDS logic
And on the A23, A31, A31s and A33, you need one more clock line:
- 'lvds-alt': An alternative clock source, separate from the TCON channel 0
clock, that can be used to drive the LVDS clock
TCON TOP
--------
TCON TOPs main purpose is to configure whole display pipeline. It determines
relationships between mixers and TCONs, selects source TCON for HDMI, muxes
LCD and TV encoder GPIO output, selects TV encoder clock source and contains
additional TV TCON and DSI gates.
It allows display pipeline to be configured in very different ways:
/ LCD0/LVDS0
/ [0] TCON-LCD0
| \ MIPI DSI
mixer0 |
\ / [1] TCON-LCD1 - LCD1/LVDS1
TCON-TOP
/ \ [2] TCON-TV0 [0] - TVE0/RGB
mixer1 | \
| TCON-TOP - HDMI
| /
\ [3] TCON-TV1 [1] - TVE1/RGB
Note that both TCON TOP references same physical unit. Both mixers can be
connected to any TCON. Not all TCON TOP variants support all features.
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-r40-tcon-top
* allwinner,sun50i-h6-tcon-top
- reg: base address and size of the memory-mapped region.
- clocks: phandle to the clocks feeding the TCON TOP
* bus: TCON TOP interface clock
* tcon-tv0: TCON TV0 clock
* tve0: TVE0 clock (R40 only)
* tcon-tv1: TCON TV1 clock (R40 only)
* tve1: TVE0 clock (R40 only)
* dsi: MIPI DSI clock (R40 only)
- clock-names: clock name mentioned above
- resets: phandle to the reset line driving the TCON TOP
- #clock-cells : must contain 1
- clock-output-names: Names of clocks created for TCON TV0 channel clock,
TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in
that order.
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
be defined:
* port 0 is input for mixer0 mux
* port 1 is output for mixer0 mux
* port 2 is input for mixer1 mux
* port 3 is output for mixer1 mux
* port 4 is input for HDMI mux
* port 5 is output for HDMI mux
All output endpoints for mixer muxes and input endpoints for HDMI mux should
have reg property with the id of the target TCON, as shown in above graph
(0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
endpoint connected to remote endpoint.
DRC
---
The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
(A31, A23, A33, A80), allows to dynamically adjust pixel
brightness/contrast based on histogram measurements for LCD content
adaptive backlight control.
Required properties:
- compatible: value must be one of:
* allwinner,sun6i-a31-drc
* allwinner,sun6i-a31s-drc
* allwinner,sun8i-a23-drc
* allwinner,sun8i-a33-drc
* allwinner,sun9i-a80-drc
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the DRC
* ahb: the DRC interface clock
* mod: the DRC module clock
* ram: the DRC DRAM clock
- clock-names: the clock names mentioned above
- resets: phandles to the reset line driving the DRC
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the outputs
Display Engine Backend
----------------------
The display engine backend exposes layers and sprites to the
system.
Required properties:
- compatible: value must be one of:
* allwinner,sun4i-a10-display-backend
* allwinner,sun5i-a13-display-backend
* allwinner,sun6i-a31-display-backend
* allwinner,sun7i-a20-display-backend
* allwinner,sun8i-a23-display-backend
* allwinner,sun8i-a33-display-backend
* allwinner,sun9i-a80-display-backend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
* ahb: the backend interface clock
* mod: the backend module clock
* ram: the backend DRAM clock
- clock-names: the clock names mentioned above
- resets: phandles to the reset controllers driving the backend
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the output
On the A33, some additional properties are required:
- reg needs to have an additional region corresponding to the SAT
- reg-names need to be set, with "be" and "sat"
- clocks and clock-names need to have a phandle to the SAT bus
clocks, whose name will be "sat"
- resets and reset-names need to have a phandle to the SAT bus
resets, whose name will be "sat"
DEU
---
The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
can sharpen the display content in both luma and chroma channels.
Required properties:
- compatible: value must be one of:
* allwinner,sun9i-a80-deu
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the DEU
* ahb: the DEU interface clock
* mod: the DEU module clock
* ram: the DEU DRAM clock
- clock-names: the clock names mentioned above
- resets: phandles to the reset line driving the DEU
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the outputs
Display Engine Frontend
-----------------------
The display engine frontend does formats conversion, scaling,
deinterlacing and color space conversion.
Required properties:
- compatible: value must be one of:
* allwinner,sun4i-a10-display-frontend
* allwinner,sun5i-a13-display-frontend
* allwinner,sun6i-a31-display-frontend
* allwinner,sun7i-a20-display-frontend
* allwinner,sun8i-a23-display-frontend
* allwinner,sun8i-a33-display-frontend
* allwinner,sun9i-a80-display-frontend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
* ahb: the backend interface clock
* mod: the backend module clock
* ram: the backend DRAM clock
- clock-names: the clock names mentioned above
- resets: phandles to the reset controllers driving the backend
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the outputs
Display Engine 2.0 Mixer
------------------------
The DE2 mixer have many functionalities, currently only layer blending is
supported.
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-de2-mixer-0
* allwinner,sun8i-a83t-de2-mixer-1
* allwinner,sun8i-h3-de2-mixer-0
* allwinner,sun8i-r40-de2-mixer-0
* allwinner,sun8i-r40-de2-mixer-1
* allwinner,sun8i-v3s-de2-mixer
* allwinner,sun50i-a64-de2-mixer-0
* allwinner,sun50i-a64-de2-mixer-1
* allwinner,sun50i-h6-de3-mixer-0
- reg: base address and size of the memory-mapped region.
- clocks: phandles to the clocks feeding the mixer
* bus: the mixer interface clock
* mod: the mixer module clock
- clock-names: the clock names mentioned above
- resets: phandles to the reset controllers driving the mixer
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. The
first port should be the input endpoints, the second one the output
Display Engine Pipeline
-----------------------
The display engine pipeline (and its entry point, since it can be
either directly the backend or the frontend) is represented as an
extra node.
Required properties:
- compatible: value must be one of:
* allwinner,sun4i-a10-display-engine
* allwinner,sun5i-a10s-display-engine
* allwinner,sun5i-a13-display-engine
* allwinner,sun6i-a31-display-engine
* allwinner,sun6i-a31s-display-engine
* allwinner,sun7i-a20-display-engine
* allwinner,sun8i-a23-display-engine
* allwinner,sun8i-a33-display-engine
* allwinner,sun8i-a83t-display-engine
* allwinner,sun8i-h3-display-engine
* allwinner,sun8i-r40-display-engine
* allwinner,sun8i-v3s-display-engine
* allwinner,sun9i-a80-display-engine
* allwinner,sun50i-a64-display-engine
* allwinner,sun50i-h6-display-engine
- allwinner,pipelines: list of phandle to the display engine
frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
Example:
panel: panel {
compatible = "olimex,lcd-olinuxino-43-ts";
#address-cells = <1>;
#size-cells = <0>;
port {
#address-cells = <1>;
#size-cells = <0>;
panel_input: endpoint {
remote-endpoint = <&tcon0_out_panel>;
};
};
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun5i-a10s-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hdmi_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_hdmi>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
};
};
tve0: tv-encoder@1c0a000 {
compatible = "allwinner,sun4i-a10-tv-encoder";
reg = <0x01c0a000 0x1000>;
clocks = <&ahb_gates 34>;
resets = <&tcon_ch0_clk 0>;
port {
#address-cells = <1>;
#size-cells = <0>;
tve0_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_tve0>;
};
};
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
resets = <&tcon_ch0_clk 1>;
reset-names = "lcd";
clocks = <&ahb_gates 36>,
<&tcon_ch0_clk>,
<&tcon_ch1_clk>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon-pixel-clock";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
tcon0_out_tve0: endpoint@1 {
reg = <1>;
remote-endpoint = <&tve0_in_tcon0>;
};
};
};
};
fe0: display-frontend@1e00000 {
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
clocks = <&ahb_gates 46>, <&de_fe_clk>,
<&dram_gates 25>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_fe_clk>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint {
remote-endpoint = <&be0_in_fe0>;
};
};
};
};
be0: display-backend@1e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <47>;
clocks = <&ahb_gates 44>, <&de_be_clk>,
<&dram_gates 26>;
clock-names = "ahb", "mod",
"ram";
resets = <&de_be_clk>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
};
};
};
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
};

6
Documentation/devicetree/bindings/i2c/i2c-at91.txt
View File

@ -18,8 +18,10 @@ Optional properties:
- dma-names: should contain "tx" and "rx".
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
capable I2C controllers.
- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
and "atmel,sama5d2-i2c".
- i2c-sda-hold-time-ns: TWD hold time, only available for:
"atmel,sama5d4-i2c",
"atmel,sama5d2-i2c",
"microchip,sam9x60-i2c".
- Child nodes conforming to i2c bus binding
Examples :

4
Documentation/devicetree/bindings/net/can/tcan4x5x.txt
View File

@ -10,7 +10,6 @@ Required properties:
- #size-cells: 0
- spi-max-frequency: Maximum frequency of the SPI bus the chip can
operate at should be less than or equal to 18 MHz.
- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
- interrupt-parent: the phandle to the interrupt controller which provides
the interrupt.
- interrupts: interrupt specification for data-ready.
@ -23,6 +22,7 @@ Optional properties:
reset.
- device-state-gpios: Input GPIO that indicates if the device is in
a sleep state or if the device is active.
- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
Example:
tcan4x5x: tcan4x5x@0 {
@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 {
interrupts = <14 GPIO_ACTIVE_LOW>;
device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
};

1
Documentation/devicetree/bindings/net/snps,dwmac.yaml
View File

@ -347,6 +347,7 @@ allOf:
- st,spear600-gmac
then:
properties:
snps,tso:
$ref: /schemas/types.yaml#definitions/flag
description:

2
Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
View File

@ -22,6 +22,6 @@ Example:
};
&ethernet_switch {
resets = <&reset>;
resets = <&reset 26>;
reset-names = "switch";
};

4
Documentation/devicetree/bindings/spi/spi-controller.yaml
View File

@ -111,7 +111,7 @@ patternProperties:
spi-rx-bus-width:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 2, 4 ]
- enum: [ 1, 2, 4, 8 ]
- default: 1
description:
Bus width to the SPI bus used for MISO.
@ -123,7 +123,7 @@ patternProperties:
spi-tx-bus-width:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 2, 4 ]
- enum: [ 1, 2, 4, 8 ]
- default: 1
description:
Bus width to the SPI bus used for MOSI.

2
Documentation/devicetree/bindings/vendor-prefixes.yaml
View File

@ -825,6 +825,8 @@ patternProperties:
description: Sancloud Ltd
"^sandisk,.*":
description: Sandisk Corporation
"^satoz,.*":
description: Satoz International Co., Ltd
"^sbs,.*":
description: Smart Battery System
"^schindler,.*":

2
Documentation/features/debug/gcov-profile-all/arch-support.txt
View File

@ -23,7 +23,7 @@
| openrisc: | TODO |
| parisc: | TODO |
| powerpc: | ok |
| riscv: | TODO |
| riscv: | ok |
| s390: | ok |
| sh: | ok |
| sparc: | TODO |

5
Documentation/kbuild/kconfig-language.rst
View File

@ -196,14 +196,11 @@ applicable everywhere (see syntax).
or equal to the first symbol and smaller than or equal to the second
symbol.
- help text: "help" or "---help---"
- help text: "help"
This defines a help text. The end of the help text is determined by
the indentation level, this means it ends at the first line which has
a smaller indentation than the first line of the help text.
"---help---" and "help" do not differ in behaviour, "---help---" is
used to help visually separate configuration logic from help within
the file as an aid to developers.
- misc options: "option" <symbol>[=<value>]

16
Documentation/kbuild/makefiles.rst
View File

@ -297,9 +297,19 @@ more details, with real examples.
If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular)
the corresponding obj- variable will be set, and kbuild will descend
down in the ext2 directory.
Kbuild only uses this information to decide that it needs to visit
the directory, it is the Makefile in the subdirectory that
specifies what is modular and what is built-in.
Kbuild uses this information not only to decide that it needs to visit
the directory, but also to decide whether or not to link objects from
the directory into vmlinux.
When Kbuild descends into the directory with 'y', all built-in objects
from that directory are combined into the built-in.a, which will be
eventually linked into vmlinux.
When Kbuild descends into the directory with 'm', in contrast, nothing
from that directory will be linked into vmlinux. If the Makefile in
that directory specifies obj-y, those objects will be left orphan.
It is very likely a bug of the Makefile or of dependencies in Kconfig.
It is good practice to use a `CONFIG_` variable when assigning directory
names. This allows kbuild to totally skip the directory if the

2
Documentation/media/v4l-drivers/meye.rst
View File

@ -95,7 +95,7 @@ so all video4linux tools (like xawtv) should work with this driver.
Besides the video4linux interface, the driver has a private interface
for accessing the Motion Eye extended parameters (camera sharpness,
agc, video framerate), the shapshot and the MJPEG capture facilities.
agc, video framerate), the snapshot and the MJPEG capture facilities.
This interface consists of several ioctls (prototypes and structures
can be found in include/linux/meye.h):

6
Documentation/networking/dsa/sja1105.rst
View File

@ -230,12 +230,6 @@ simultaneously on two ports. The driver checks the consistency of the schedules
against this restriction and errors out when appropriate. Schedule analysis is
needed to avoid this, which is outside the scope of the document.
At the moment, the time-aware scheduler can only be triggered based on a
standalone clock and not based on PTP time. This means the base-time argument
from tc-taprio is ignored and the schedule starts right away. It also means it
is more difficult to phase-align the scheduler with the other devices in the
network.
Device Tree bindings and board design
=====================================

2
Documentation/networking/ip-sysctl.txt
View File

@ -603,7 +603,7 @@ tcp_synack_retries - INTEGER
with the current initial RTO of 1second. With this the final timeout
for a passive TCP connection will happen after 63seconds.
tcp_syncookies - BOOLEAN
tcp_syncookies - INTEGER
Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
Send out syncookies when the syn backlog queue of a socket
overflows. This is to prevent against the common 'SYN flood attack'

2
Documentation/networking/j1939.rst
View File

@ -339,7 +339,7 @@ To claim an address following code example can be used:
.pgn = J1939_PGN_ADDRESS_CLAIMED,
.pgn_mask = J1939_PGN_PDU1_MAX,
}, {
.pgn = J1939_PGN_ADDRESS_REQUEST,
.pgn = J1939_PGN_REQUEST,
.pgn_mask = J1939_PGN_PDU1_MAX,
}, {
.pgn = J1939_PGN_ADDRESS_COMMANDED,

4
Documentation/networking/netdev-FAQ.rst
View File

@ -34,8 +34,8 @@ the names, the ``net`` tree is for fixes to existing code already in the
mainline tree from Linus, and ``net-next`` is where the new code goes
for the future release. You can find the trees here:
- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
Q: How often do changes from these trees make it to the mainline Linus tree?
----------------------------------------------------------------------------

2
Documentation/process/embargoed-hardware-issues.rst
View File

@ -255,7 +255,7 @@ an involved disclosed party. The current ambassadors list:
Red Hat Josh Poimboeuf <jpoimboe@redhat.com>
SUSE Jiri Kosina <jkosina@suse.cz>
Amazon
Amazon Peter Bowen <pzb@amzn.com>
Google Kees Cook <keescook@chromium.org>
============= ========================================================

1
Documentation/process/index.rst
View File

@ -60,6 +60,7 @@ lack of a better place.
volatile-considered-harmful
botching-up-ioctls
clang-format
../riscv/patch-acceptance
.. only:: subproject and html

1
Documentation/riscv/index.rst
View File

@ -7,6 +7,7 @@ RISC-V architecture
boot-image-header
pmu
patch-acceptance
.. only:: subproject and html

35
Documentation/riscv/patch-acceptance.rst Normal file
View File

@ -0,0 +1,35 @@
.. SPDX-License-Identifier: GPL-2.0
arch/riscv maintenance guidelines for developers
================================================
Overview
--------
The RISC-V instruction set architecture is developed in the open:
in-progress drafts are available for all to review and to experiment
with implementations. New module or extension drafts can change
during the development process - sometimes in ways that are
incompatible with previous drafts. This flexibility can present a
challenge for RISC-V Linux maintenance. Linux maintainers disapprove
of churn, and the Linux development process prefers well-reviewed and
tested code over experimental code. We wish to extend these same
principles to the RISC-V-related code that will be accepted for
inclusion in the kernel.
Submit Checklist Addendum
-------------------------
We'll only accept patches for new modules or extensions if the
specifications for those modules or extensions are listed as being
"Frozen" or "Ratified" by the RISC-V Foundation. (Developers may, of
course, maintain their own Linux kernel trees that contain code for
any draft extensions that they wish.)
Additionally, the RISC-V specification allows implementors to create
their own custom extensions. These custom extensions aren't required
to go through any review or ratification process by the RISC-V
Foundation. To avoid the maintenance complexity and potential
performance impact of adding kernel code for implementor-specific
RISC-V extensions, we'll only to accept patches for extensions that
have been officially frozen or ratified by the RISC-V Foundation.
(Implementors, may, of course, maintain their own Linux kernel trees
containing code for any custom extensions that they wish.)

70
MAINTAINERS
View File

@ -720,7 +720,7 @@ F: Documentation/devicetree/bindings/i2c/i2c-altera.txt
F: drivers/i2c/busses/i2c-altera.c
ALTERA MAILBOX DRIVER
M: Ley Foon Tan <lftan@altera.com>
M: Ley Foon Tan <ley.foon.tan@intel.com>
L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
S: Maintained
F: drivers/mailbox/mailbox-altera.c
@ -771,6 +771,8 @@ F: drivers/thermal/thermal_mmio.c
AMAZON ETHERNET DRIVERS
M: Netanel Belgazal <netanel@amazon.com>
M: Arthur Kiyanovski <akiyano@amazon.com>
R: Guy Tzalik <gtzalik@amazon.com>
R: Saeed Bishara <saeedb@amazon.com>
R: Zorik Machulsky <zorik@amazon.com>
L: netdev@vger.kernel.org
@ -1405,7 +1407,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM/ACTIONS SEMI ARCHITECTURE
M: Andreas Färber <afaerber@suse.de>
R: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: owl
@ -2272,6 +2274,7 @@ F: drivers/*/*s3c64xx*
F: drivers/*/*s5pv210*
F: drivers/memory/samsung/
F: drivers/soc/samsung/
F: drivers/tty/serial/samsung*
F: include/linux/soc/samsung/
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
@ -3147,7 +3150,7 @@ S: Maintained
F: arch/mips/net/
BPF JIT for NFP NICs
M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
@ -5018,7 +5021,7 @@ F: include/linux/dma-mapping.h
F: include/linux/dma-noncoherent.h
DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
M: Lukasz Luba <l.luba@partner.samsung.com>
M: Lukasz Luba <lukasz.luba@arm.com>
L: linux-pm@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
@ -5357,6 +5360,12 @@ S: Maintained
F: drivers/gpu/drm/tiny/st7735r.c
F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt
DRM DRIVER FOR SONY ACX424AKP PANELS
M: Linus Walleij <linus.walleij@linaro.org>
T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/panel/panel-sony-acx424akp.c
DRM DRIVER FOR ST-ERICSSON MCDE
M: Linus Walleij <linus.walleij@linaro.org>
T: git git://anongit.freedesktop.org/drm/drm-misc
@ -6049,6 +6058,7 @@ M: Yash Shah <yash.shah@sifive.com>
L: linux-edac@vger.kernel.org
S: Supported
F: drivers/edac/sifive_edac.c
F: drivers/soc/sifive_l2_cache.c
EDAC-SKYLAKE
M: Tony Luck <tony.luck@intel.com>
@ -7055,6 +7065,7 @@ L: linux-acpi@vger.kernel.org
S: Maintained
F: Documentation/firmware-guide/acpi/gpio-properties.rst
F: drivers/gpio/gpiolib-acpi.c
F: drivers/gpio/gpiolib-acpi.h
GPIO IR Transmitter
M: Sean Young <sean@mess.org>
@ -9062,7 +9073,6 @@ F: include/linux/umh.h
KERNEL VIRTUAL MACHINE (KVM)
M: Paolo Bonzini <pbonzini@redhat.com>
M: Radim Krčmář <rkrcmar@redhat.com>
L: kvm@vger.kernel.org
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
@ -9097,9 +9107,9 @@ F: virt/kvm/arm/
F: include/kvm/arm_*
KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
M: James Hogan <jhogan@kernel.org>
L: linux-mips@vger.kernel.org
S: Supported
L: kvm@vger.kernel.org
S: Orphan
F: arch/mips/include/uapi/asm/kvm*
F: arch/mips/include/asm/kvm*
F: arch/mips/kvm/
@ -9134,7 +9144,6 @@ F: tools/testing/selftests/kvm/*/s390x/
KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
M: Paolo Bonzini <pbonzini@redhat.com>
M: Radim Krčmář <rkrcmar@redhat.com>
R: Sean Christopherson <sean.j.christopherson@intel.com>
R: Vitaly Kuznetsov <vkuznets@redhat.com>
R: Wanpeng Li <wanpengli@tencent.com>
@ -10132,6 +10141,7 @@ S: Maintained
F: drivers/media/radio/radio-maxiradio*
MCAN MMIO DEVICE DRIVER
M: Dan Murphy <dmurphy@ti.com>
M: Sriram Dash <sriram.dash@samsung.com>
L: linux-can@vger.kernel.org
S: Maintained
@ -11450,7 +11460,7 @@ F: include/uapi/linux/netrom.h
F: net/netrom/
NETRONOME ETHERNET DRIVERS
M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jakub Kicinski <kuba@kernel.org>
L: oss-drivers@netronome.com
S: Maintained
F: drivers/net/ethernet/netronome/
@ -11479,8 +11489,8 @@ M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
Q: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
S: Odd Fixes
F: Documentation/devicetree/bindings/net/
F: drivers/net/
@ -11521,8 +11531,8 @@ M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
Q: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
B: mailto:netdev@vger.kernel.org
S: Maintained
F: net/
@ -11567,7 +11577,7 @@ M: "David S. Miller" <davem@davemloft.net>
M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
L: netdev@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
S: Maintained
F: net/ipv4/
F: net/ipv6/
@ -11610,7 +11620,7 @@ M: Boris Pismenny <borisp@mellanox.com>
M: Aviad Yehezkel <aviadye@mellanox.com>
M: John Fastabend <john.fastabend@gmail.com>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
S: Maintained
F: net/tls/*
@ -11622,7 +11632,7 @@ L: linux-wireless@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-wireless/list/
NETDEVSIM
M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jakub Kicinski <kuba@kernel.org>
S: Maintained
F: drivers/net/netdevsim/*
@ -11699,7 +11709,7 @@ F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/nsp32*
NIOS2 ARCHITECTURE
M: Ley Foon Tan <lftan@altera.com>
M: Ley Foon Tan <ley.foon.tan@intel.com>
L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
S: Maintained
@ -12583,7 +12593,7 @@ F: Documentation/devicetree/bindings/pci/aardvark-pci.txt
F: drivers/pci/controller/pci-aardvark.c
PCI DRIVER FOR ALTERA PCIE IP
M: Ley Foon Tan <lftan@altera.com>
M: Ley Foon Tan <ley.foon.tan@intel.com>
L: rfi@lists.rocketboards.org (moderated for non-subscribers)
L: linux-pci@vger.kernel.org
S: Supported
@ -12762,7 +12772,7 @@ S: Supported
F: Documentation/PCI/pci-error-recovery.rst
PCI MSI DRIVER FOR ALTERA MSI IP
M: Ley Foon Tan <lftan@altera.com>
M: Ley Foon Tan <ley.foon.tan@intel.com>
L: rfi@lists.rocketboards.org (moderated for non-subscribers)
L: linux-pci@vger.kernel.org
S: Supported
@ -13698,7 +13708,6 @@ F: drivers/net/ethernet/qualcomm/emac/
QUALCOMM ETHQOS ETHERNET DRIVER
M: Vinod Koul <vkoul@kernel.org>
M: Niklas Cassel <niklas.cassel@linaro.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@ -13732,6 +13741,15 @@ L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/qcom_iommu.c
QUALCOMM RMNET DRIVER
M: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
M: Sean Tranchetti <stranche@codeaurora.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/qualcomm/rmnet/
F: Documentation/networking/device_drivers/qualcomm/rmnet.txt
F: include/linux/if_rmnet.h
QUALCOMM TSENS THERMAL DRIVER
M: Amit Kucheria <amit.kucheria@linaro.org>
L: linux-pm@vger.kernel.org
@ -14131,6 +14149,7 @@ M: Paul Walmsley <paul.walmsley@sifive.com>
M: Palmer Dabbelt <palmer@dabbelt.com>
M: Albert Ou <aou@eecs.berkeley.edu>
L: linux-riscv@lists.infradead.org
P: Documentation/riscv/patch-acceptance.rst
T: git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
S: Supported
F: arch/riscv/
@ -14558,8 +14577,6 @@ F: include/linux/platform_data/spi-s3c64xx.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
M: Girish K S <ks.giri@samsung.com>
M: Vipul Pandya <vipul.pandya@samsung.com>
S: Supported
L: netdev@vger.kernel.org
F: drivers/net/ethernet/samsung/sxgbe/
@ -16555,6 +16572,13 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Odd Fixes
F: sound/soc/codecs/tas571x*
TI TCAN4X5X DEVICE DRIVER
M: Dan Murphy <dmurphy@ti.com>
L: linux-can@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/net/can/tcan4x5x.txt
F: drivers/net/can/m_can/tcan4x5x.c
TI TRF7970A NFC DRIVER
M: Mark Greer <mgreer@animalcreek.com>
L: linux-wireless@vger.kernel.org
@ -18047,7 +18071,7 @@ XDP (eXpress Data Path)
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
M: David S. Miller <davem@davemloft.net>
M: Jakub Kicinski <jakub.kicinski@netronome.com>
M: Jakub Kicinski <kuba@kernel.org>
M: Jesper Dangaard Brouer <hawk@kernel.org>
M: John Fastabend <john.fastabend@gmail.com>
L: netdev@vger.kernel.org

5
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc7
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@ -414,6 +414,7 @@ STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
OBJSIZE = $(CROSS_COMPILE)size
READELF = $(CROSS_COMPILE)readelf
PAHOLE = pahole
LEX = flex
YACC = bison
@ -472,7 +473,7 @@ GCC_PLUGINS_CFLAGS :=
CLANG_FLAGS :=
export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE PAHOLE LEX YACC AWK INSTALLKERNEL
export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE

8
arch/arc/include/asm/entry-arcv2.h
View File

@ -162,7 +162,7 @@
#endif
#ifdef CONFIG_ARC_HAS_ACCL_REGS
ST2 r58, r59, PT_sp + 12
ST2 r58, r59, PT_r58
#endif
.endm
@ -172,8 +172,8 @@
LD2 gp, fp, PT_r26 ; gp (r26), fp (r27)
ld r12, [sp, PT_sp + 4]
ld r30, [sp, PT_sp + 8]
ld r12, [sp, PT_r12]
ld r30, [sp, PT_r30]
; Restore SP (into AUX_USER_SP) only if returning to U mode
; - for K mode, it will be implicitly restored as stack is unwound
@ -190,7 +190,7 @@
#endif
#ifdef CONFIG_ARC_HAS_ACCL_REGS
LD2 r58, r59, PT_sp + 12
LD2 r58, r59, PT_r58
#endif
.endm

1
arch/arc/include/asm/hugepage.h
View File

@ -8,7 +8,6 @@
#define _ASM_ARC_HUGEPAGE_H
#include <linux/types.h>
#define __ARCH_USE_5LEVEL_HACK
#include <asm-generic/pgtable-nopmd.h>
static inline pte_t pmd_pte(pmd_t pmd)

10
arch/arc/kernel/asm-offsets.c
View File

@ -66,7 +66,15 @@ int main(void)
DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
#ifdef CONFIG_ISA_ARCV2
OFFSET(PT_r12, pt_regs, r12);
OFFSET(PT_r30, pt_regs, r30);
#endif
#ifdef CONFIG_ARC_HAS_ACCL_REGS
OFFSET(PT_r58, pt_regs, r58);
OFFSET(PT_r59, pt_regs, r59);
#endif
return 0;
}

2
arch/arc/plat-eznps/Kconfig
View File

@ -7,7 +7,7 @@
menuconfig ARC_PLAT_EZNPS
bool "\"EZchip\" ARC dev platform"
select CPU_BIG_ENDIAN
select CLKSRC_NPS
select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
select EZNPS_GIC
select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
help

1
arch/arm/Kconfig
View File

@ -72,6 +72,7 @@ config ARM
select HAVE_ARM_SMCCC if CPU_V7
select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
select HAVE_CONTEXT_TRACKING
select HAVE_COPY_THREAD_TLS
select HAVE_C_RECORDMCOUNT
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS if MMU

2
arch/arm/boot/dts/am335x-sancloud-bbe.dts
View File

@ -108,7 +108,7 @@
&cpsw_emac0 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
phy-mode = "rgmii-id";
};
&i2c0 {

2
arch/arm/boot/dts/am437x-gp-evm.dts
View File

@ -86,7 +86,7 @@
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;

2
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -42,7 +42,7 @@
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;

6
arch/arm/boot/dts/am571x-idk.dts
View File

@ -167,11 +167,7 @@
&pcie1_rc {
status = "okay";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};
&mmc1 {

4
arch/arm/boot/dts/am572x-idk-common.dtsi
View File

@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&pcie1_ep {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

25
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View File

@ -29,6 +29,27 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
main_12v0: fixedregulator-main_12v0 {
/* main supply */
compatible = "regulator-fixed";
regulator-name = "main_12v0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
regulator-boot-on;
};
evm_5v0: fixedregulator-evm_5v0 {
/* Output of TPS54531D */
compatible = "regulator-fixed";
regulator-name = "evm_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&main_12v0>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
@ -547,10 +568,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&pcie1_ep {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;

369
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
View File

@ -258,9 +258,9 @@
};
};
pca0: pca9552@60 {
pca0: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x60>;
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
@ -519,371 +519,6 @@
status = "okay";
};
&i2c13 {
status = "okay";
};
&i2c14 {
status = "okay";
};
&i2c15 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
power-supply@68 {
compatible = "ibm,cffps2";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps2";
reg = <0x69>;
};
power-supply@6a {
compatible = "ibm,cffps2";
reg = <0x6a>;
};
power-supply@6b {
compatible = "ibm,cffps2";
reg = <0x6b>;
};
};
&i2c4 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c5 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
};
&i2c6 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
tmp275@4b {
compatible = "ti,tmp275";
reg = <0x4b>;
};
};
&i2c7 {
status = "okay";
si7021-a20@20 {
compatible = "silabs,si7020";
reg = <0x20>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
#address-cells = <1>;
#size-cells = <0>;
fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
};
pca0: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
};
gpio@1 {
reg = <1>;
};
gpio@2 {
reg = <2>;
};
gpio@3 {
reg = <3>;
};
gpio@4 {
reg = <4>;
};
gpio@5 {
reg = <5>;
};
gpio@6 {
reg = <6>;
};
gpio@7 {
reg = <7>;
};
gpio@8 {
reg = <8>;
};
gpio@9 {
reg = <9>;
};
gpio@10 {
reg = <10>;
};
gpio@11 {
reg = <11>;
};
gpio@12 {
reg = <12>;
};
gpio@13 {
reg = <13>;
};
gpio@14 {
reg = <14>;
};
gpio@15 {
reg = <15>;
};
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
#io-channel-cells = <0>;
};
};
&i2c8 {
status = "okay";
ucd90320@b {
compatible = "ti,ucd90160";
reg = <0x0b>;
};
ucd90320@c {
compatible = "ti,ucd90160";
reg = <0x0c>;
};
ucd90320@11 {
compatible = "ti,ucd90160";
reg = <0x11>;
};
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c9 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
};
&i2c10 {
status = "okay";
ir35221@42 {
compatible = "infineon,ir35221";
reg = <0x42>;
};
ir35221@43 {
compatible = "infineon,ir35221";
reg = <0x43>;
};
ir35221@44 {
compatible = "infineon,ir35221";
reg = <0x44>;
};
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
ir35221@72 {
compatible = "infineon,ir35221";
reg = <0x72>;
};
ir35221@73 {
compatible = "infineon,ir35221";
reg = <0x73>;
};
ir35221@74 {
compatible = "infineon,ir35221";
reg = <0x74>;
};
};
&i2c11 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";

403
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
View File

@ -122,37 +122,6 @@
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
spi-max-frequency = <50000000>;
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
};
};
&mac2 {
status = "okay";
pinctrl-names = "default";
@ -165,6 +134,11 @@
&emmc {
status = "okay";
};
&fsim0 {
status = "okay";
#address-cells = <2>;
#size-cells = <0>;
@ -820,373 +794,6 @@
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
bmp: bmp280@77 {
compatible = "bosch,bmp280";
reg = <0x77>;
#io-channel-cells = <1>;
};
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
#address-cells = <1>;
#size-cells = <0>;
fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
maxim,fan-rotor-input = "tach";
maxim,fan-pwm-freq = <25000>;
maxim,fan-dual-tach;
maxim,fan-no-watchdog;
maxim,fan-no-fault-ramp;
maxim,fan-ramp = <2>;
maxim,fan-fault-pin-mon;
};
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
#io-channel-cells = <0>;
};
pca0: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
power-supply@68 {
compatible = "ibm,cffps1";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps1";
reg = <0x69>;
};
};
&i2c4 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
ir35221@70 {
compatible = "infineon,ir35221";
reg = <0x70>;
};
ir35221@71 {
compatible = "infineon,ir35221";
reg = <0x71>;
};
};
&i2c5 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
ir35221@70 {
compatible = "infineon,ir35221";
reg = <0x70>;
};
ir35221@71 {
compatible = "infineon,ir35221";
reg = <0x71>;
};
};
&i2c7 {
status = "okay";
};
&i2c9 {
status = "okay";
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
pca9552: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
"GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
"GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
ucd90160@64 {
compatible = "ti,ucd90160";
reg = <0x64>;
};
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&pinctrl {
/* Hog these as no driver is probed for the entire LPC block */
pinctrl-names = "default";

39
arch/arm/boot/dts/aspeed-g6.dtsi
View File

@ -163,26 +163,6 @@
spi-max-frequency = <50000000>;
status = "disabled";
};
fsim0: fsi@1e79b000 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
fsim1: fsi@1e79b100 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
};
mdio0: mdio@1e650000 {
@ -595,6 +575,25 @@
ranges = <0 0x1e78a000 0x1000>;
};
fsim0: fsi@1e79b000 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
fsim1: fsi@1e79b100 {
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
status = "disabled";
};
};
};
};

4
arch/arm/boot/dts/bcm-cygnus.dtsi
View File

@ -174,8 +174,8 @@
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
#address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {

2
arch/arm/boot/dts/bcm2711.dtsi
View File

@ -43,7 +43,7 @@
<0x7c000000 0x0 0xfc000000 0x02000000>,
<0x40000000 0x0 0xff800000 0x00800000>;
/* Emulate a contiguous 30-bit address range for DMA */
dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
/*
* This node is the provider for the enable-method for

2
arch/arm/boot/dts/bcm283x.dtsi
View File

@ -37,7 +37,7 @@
trips {
cpu-crit {
temperature = <80000>;
temperature = <90000>;
hysteresis = <0>;
type = "critical";
};

4
arch/arm/boot/dts/bcm5301x.dtsi
View File

@ -353,8 +353,8 @@
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
#address-cells = <1>;
};
mdio-bus-mux@18003000 {

5
arch/arm/boot/dts/e60k02.dtsi
View File

@ -265,11 +265,6 @@
regulator-name = "LDORTC1";
regulator-boot-on;
};
ldortc2_reg: LDORTC2 {
regulator-name = "LDORTC2";
regulator-boot-on;
};
};
};
};

2
arch/arm/boot/dts/imx6dl-icore-mipi.dts
View File

@ -8,7 +8,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-icore.dtsi"
#include "imx6qdl-icore-1.5.dtsi"
/ {
model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";

2
arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
View File

@ -63,7 +63,7 @@
#sound-dai-cells = <0>;
clocks = <&clk_ext_audio_codec>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
VDDIO-supply = <&sw2_reg>;
};
};

2
arch/arm/boot/dts/imx6q-dhcom-som.dtsi
View File

@ -204,7 +204,7 @@
};
rtc@56 {
compatible = "rv3029c2";
compatible = "microcrystal,rv3029";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_hw300>;
reg = <0x56>;

4
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View File

@ -749,10 +749,6 @@
vin-supply = <&vgen5_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen5_reg>;
};

4
arch/arm/boot/dts/imx6sl-evk.dts
View File

@ -584,10 +584,6 @@
vin-supply = <&sw2_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&sw2_reg>;
};

4
arch/arm/boot/dts/imx6sll-evk.dts
View File

@ -265,10 +265,6 @@
status = "okay";
};
&reg_3p0 {
vin-supply = <&sw2_reg>;
};
&snvs_poweroff {
status = "okay";
};

4
arch/arm/boot/dts/imx6sx-sdb-reva.dts
View File

@ -159,10 +159,6 @@
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};

4
arch/arm/boot/dts/imx6sx-sdb.dts
View File

@ -141,10 +141,6 @@
vin-supply = <&vgen6_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};

28
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
View File

@ -30,14 +30,26 @@
enable-active-high;
};
reg_sensors: regulator-sensors {
reg_peri_3v3: regulator-peri-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sensors_reg>;
regulator-name = "sensors-supply";
pinctrl-0 = <&pinctrl_peri_3v3>;
regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
/*
* If you want to want to make this dynamic please
* check schematics and test all affected peripherals:
*
* - sensors
* - ethernet phy
* - can
* - bluetooth
* - wm8960 audio codec
* - ov5640 camera
*/
regulator-always-on;
};
reg_can_3v3: regulator-can-3v3 {
@ -140,6 +152,7 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
phy-supply = <&reg_peri_3v3>;
status = "okay";
};
@ -148,6 +161,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
phy-supply = <&reg_peri_3v3>;
status = "okay";
mdio {
@ -193,8 +207,8 @@
magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
vdd-supply = <&reg_sensors>;
vddio-supply = <&reg_sensors>;
vdd-supply = <&reg_peri_3v3>;
vddio-supply = <&reg_peri_3v3>;
};
};
@ -227,7 +241,7 @@
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
@ -462,7 +476,7 @@
>;
};
pinctrl_sensors_reg: sensorsreggrp {
pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
>;

4
arch/arm/boot/dts/imx7s-colibri.dtsi
View File

@ -49,3 +49,7 @@
reg = <0x80000000 0x10000000>;
};
};
&gpmi {
status = "okay";
};

4
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -37,10 +37,10 @@
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
reg = <0xf00>;
};
};

2
arch/arm/boot/dts/meson8.dtsi
View File

@ -253,7 +253,7 @@
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8-pmu", "syscon";
reg = <0xe0 0x8>;
reg = <0xe0 0x18>;
};
pinctrl_aobus: pinctrl@84 {

12
arch/arm/boot/dts/mmp3.dtsi
View File

@ -356,7 +356,7 @@
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
reg = <0xd4011000 0x70>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_clocks MMP2_CLK_TWSI0>;
resets = <&soc_clocks MMP2_CLK_TWSI0>;
@ -368,7 +368,7 @@
twsi2: i2c@d4031000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4031000 0x1000>;
reg = <0xd4031000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <0>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
@ -380,7 +380,7 @@
twsi3: i2c@d4032000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4032000 0x1000>;
reg = <0xd4032000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <1>;
clocks = <&soc_clocks MMP2_CLK_TWSI2>;
@ -392,7 +392,7 @@
twsi4: i2c@d4033000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4033000 0x1000>;
reg = <0xd4033000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <2>;
clocks = <&soc_clocks MMP2_CLK_TWSI3>;
@ -405,7 +405,7 @@
twsi5: i2c@d4033800 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4033800 0x1000>;
reg = <0xd4033800 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <3>;
clocks = <&soc_clocks MMP2_CLK_TWSI4>;
@ -417,7 +417,7 @@
twsi6: i2c@d4034000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4034000 0x1000>;
reg = <0xd4034000 0x70>;
interrupt-parent = <&twsi_mux>;
interrupts = <4>;
clocks = <&soc_clocks MMP2_CLK_TWSI5>;

2
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
View File

@ -101,7 +101,7 @@
initial-mode = <1>; /* initialize in HUB mode */
disabled-ports = <1>;
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
refclk-frequency = <19200000>;
};

1
arch/arm/configs/exynos_defconfig
View File

@ -350,6 +350,7 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set

1
arch/arm/configs/imx_v6_v7_defconfig
View File

@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set

4
arch/arm/configs/omap2plus_defconfig
View File

@ -92,6 +92,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
CONFIG_PHONET=m
CONFIG_NET_SWITCHDEV=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
@ -181,6 +182,7 @@ CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
@ -554,6 +556,6 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_TI_CPSW_SWITCHDEV=y

1
arch/arm/configs/shmobile_defconfig
View File

@ -212,4 +212,5 @@ CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y

6
arch/arm/kernel/process.c
View File

@ -226,8 +226,8 @@ void release_thread(struct task_struct *dead_task)
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
int
copy_thread(unsigned long clone_flags, unsigned long stack_start,
unsigned long stk_sz, struct task_struct *p)
copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
unsigned long stk_sz, struct task_struct *p, unsigned long tls)
{
struct thread_info *thread = task_thread_info(p);
struct pt_regs *childregs = task_pt_regs(p);
@ -261,7 +261,7 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
clear_ptrace_hw_breakpoint(p);
if (clone_flags & CLONE_SETTLS)
thread->tp_value[0] = childregs->ARM_r3;
thread->tp_value[0] = tls;
thread->tp_value[1] = get_tpuser();
thread_notify(THREAD_NOTIFY_COPY, thread);

1
arch/arm/mach-bcm/bcm2711.c
View File

@ -13,6 +13,7 @@ static const char * const bcm2711_compat[] = {
#ifdef CONFIG_ARCH_MULTI_V7
"brcm,bcm2711",
#endif
NULL
};
DT_MACHINE_START(BCM2711, "BCM2711")

1
arch/arm/mach-davinci/Kconfig
View File

@ -9,6 +9,7 @@ menuconfig ARCH_DAVINCI
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS_OF if PM && OF
select REGMAP_MMIO
select RESET_CONTROLLER
select HAVE_IDE
select PINCTRL_SINGLE

8
arch/arm/mach-imx/cpu.c
View File

@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void)
const char *ocotp_compat = NULL;
struct soc_device *soc_dev;
struct device_node *root;
struct regmap *ocotp;
struct regmap *ocotp = NULL;
const char *soc_id;
u64 soc_uid = 0;
u32 val;
@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void)
soc_id = "i.MX6UL";
break;
case MXC_CPU_IMX6ULL:
ocotp_compat = "fsl,imx6ul-ocotp";
ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULL";
break;
case MXC_CPU_IMX6ULZ:
ocotp_compat = "fsl,imx6ul-ocotp";
ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULZ";
break;
case MXC_CPU_IMX6SLL:
@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void)
ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
if (IS_ERR(ocotp))
pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
}
if (!IS_ERR_OR_NULL(ocotp)) {
regmap_read(ocotp, OCOTP_UID_H, &val);
soc_uid = val;
regmap_read(ocotp, OCOTP_UID_L, &val);

2
arch/arm/mach-mmp/pxa168.h
View File

@ -17,9 +17,9 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/soc/mmp/cputype.h>
#include "devices.h"
#include "cputype.h"
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;

2
arch/arm/mach-mmp/time.c
View File

@ -207,7 +207,7 @@ static int __init mmp_dt_init_timer(struct device_node *np)
ret = clk_prepare_enable(clk);
if (ret)
return ret;
rate = clk_get_rate(clk) / 2;
rate = clk_get_rate(clk);
} else if (cpu_is_pj4()) {
rate = 6500000;
} else {

3
arch/arm/mach-omap2/Kconfig
View File

@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_RESET_CONTROLLER
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
@ -105,11 +106,11 @@ config ARCH_OMAP2PLUS
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
select CLKSRC_TI_32K
select ARCH_HAS_RESET_CONTROLLER
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5

6
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -306,10 +306,14 @@ static void __init dra7x_evm_mmc_quirk(void)
static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct clockdomain *clkdm = NULL;
struct clk_hw_omap *hwclk;
hwclk = to_clk_hw_omap(__clk_get_hw(clk));
hwclk = to_clk_hw_omap(hw);
if (!omap2_clk_is_hw_omap(hw))
return NULL;
if (hwclk && hwclk->clkdm_name)
clkdm = clkdm_lookup(hwclk->clkdm_name);

12
arch/arm/mach-vexpress/spc.c
View File

@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
static int __init ve_spc_clk_init(void)
{
int cpu;
int cpu, cluster;
struct clk *clk;
bool init_opp_table[MAX_CLUSTERS] = { false };
if (!info)
return 0; /* Continue only if SPC is initialised */
@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
continue;
}
cluster = topology_physical_package_id(cpu_dev->id);
if (init_opp_table[cluster])
continue;
if (ve_init_opp_table(cpu_dev))
pr_warn("failed to initialise cpu%d opp table\n", cpu);
else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
topology_core_cpumask(cpu_dev->id)))
pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
else
init_opp_table[cluster] = true;
}
platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);

1
arch/arm64/Kconfig
View File

@ -138,6 +138,7 @@ config ARM64
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
select HAVE_CONTEXT_TRACKING
select HAVE_COPY_THREAD_TLS
select HAVE_DEBUG_BUGVERBOSE
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS

2
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
View File

@ -15,7 +15,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;

Some files were not shown because too many files have changed in this diff Show More