renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-07 05:04:04 +08:00
Code

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

Browse Source 
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  jmicron: update quirk for JMB361/3/5/6
  libata: add HTS542525K9SA00 to NCQ blacklist
  libata-core: auditting chk_status v check_status
  [libata] checkpatch-inspired cleanups
This commit is contained in:
Linus Torvalds 2007-10-23 18:56:21 -07:00
commit c09b360a2b
14 changed files with 269 additions and 270 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/ata/ata_piix.c
View File

@ -650,9 +650,9 @@ static int ich_pata_cable_detect(struct ata_port *ap)
while (lap->device) {
if (lap->device == pdev->device &&
lap->subvendor == pdev->subsystem_vendor &&
lap->subdevice == pdev->subsystem_device) {
lap->subdevice == pdev->subsystem_device)
return ATA_CBL_PATA40_SHORT;
}
lap++;
}
@ -1106,8 +1106,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
u16 cfg;
int no_piix_dma = 0;
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) {
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
pci_read_config_word(pdev, 0x41, &cfg);

15
drivers/ata/libata-core.c
View File

@ -49,11 +49,11 @@
#include <linux/workqueue.h>
#include <linux/jiffies.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
#include <asm/semaphore.h>
#include <asm/byteorder.h>
@ -93,7 +93,7 @@ int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
static int ata_ignore_hpa = 0;
static int ata_ignore_hpa;
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
@ -713,7 +713,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
printk("ata: SEMB device ignored\n");
printk(KERN_INFO "ata: SEMB device ignored\n");
return ATA_DEV_SEMB_UNSUP; /* not yet */
}
@ -1979,8 +1979,7 @@ int ata_dev_configure(struct ata_device *dev)
"supports DRM functions and may "
"not be fully accessable.\n");
snprintf(revbuf, 7, "CFA");
}
else
} else
snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
dev->n_sectors = ata_id_n_sectors(id);
@ -2876,14 +2875,17 @@ static int ata_dev_set_mode(struct ata_device *dev)
dev->flags |= ATA_DFLAG_PIO;
err_mask = ata_dev_set_xfermode(dev);
/* Old CFA may refuse this command, which is just fine */
if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
err_mask &= ~AC_ERR_DEV;
/* Some very old devices and some bad newer ones fail any kind of
SET_XFERMODE request but support PIO0-2 timings and no IORDY */
if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
dev->pio_mode <= XFER_PIO_2)
err_mask &= ~AC_ERR_DEV;
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
"(err_mask=0x%x)\n", err_mask);
@ -3265,7 +3267,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
* the bus shows 0xFF because the odd clown forgets the D7
* pulldown resistor.
*/
if (ata_check_status(ap) == 0xFF)
if (ata_chk_status(ap) == 0xFF)
return -ENODEV;
return ata_bus_post_reset(ap, devmask, deadline);
@ -3979,6 +3981,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
{ "HDT722516DLA380", "V43OA96A", ATA_HORKAGE_NONCQ, },
{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
{ "Hitachi HTS542525K9SA00", "BBFOC31P", ATA_HORKAGE_NONCQ, },
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
{ "WDC WD3200AAJS-00RYA0", "12.01B01", ATA_HORKAGE_NONCQ, },
{ "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },

4
drivers/ata/libata-scsi.c
View File

@ -45,7 +45,7 @@
#include <scsi/scsi_transport.h>
#include <linux/libata.h>
#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
#include "libata.h"
@ -975,7 +975,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
(system_state == SYSTEM_HALT ||
system_state == SYSTEM_POWER_OFF)) {
static unsigned long warned = 0;
static unsigned long warned;
if (!test_and_set_bit(0, &warned)) {
ata_dev_printk(qc->dev, KERN_WARNING,

5
drivers/ata/sata_mv.c
View File

@ -1983,10 +1983,9 @@ static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
for (i = 0; i < 1000; i++) {
udelay(1);
t = readl(reg);
if (PCI_MASTER_EMPTY & t) {
if (PCI_MASTER_EMPTY & t)
break;
}
}
if (!(PCI_MASTER_EMPTY & t)) {
printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
rc = 1;
@ -2668,7 +2667,7 @@ static void mv_print_info(struct ata_host *host)
*/
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
static int printed_version;
unsigned int board_idx = (unsigned int)ent->driver_data;
const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
struct ata_host *host;

6
drivers/ata/sata_nv.c
View File

@ -747,8 +747,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
on the port. */
adma_enable = 0;
nv_adma_register_mode(ap);
}
else {
} else {
bounce_limit = *ap->dev->dma_mask;
segment_boundary = NV_ADMA_DMA_BOUNDARY;
sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
@ -767,8 +766,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
if (adma_enable) {
new_reg = current_reg | config_mask;
pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
}
else {
} else {
new_reg = current_reg & ~config_mask;
pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
}

2
drivers/pci/quirks.c
View File

@ -1230,7 +1230,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
case PCI_DEVICE_ID_JMICRON_JMB363:
/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
/* Set the class codes correctly and then direct IDE 0 */
conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
break;
case PCI_DEVICE_ID_JMICRON_JMB368: