powerpc/4xx: Create 4xx pseudo-platform in platforms/4xx

We have a lot of code in sysdev for supporting 4xx, ie. either 40x or
44x. Instead it would be cleaner if it was all in platforms/4xx.

This is slightly odd in that we don't actually define any machines in
the 4xx platform, as is usual for a platform directory. But still it
seems like a better result to have all this related code in a directory
by itself.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/platforms/4xx/Makefile

@@ -0,0 +1,8 @@
+obj-y				+= uic.o
+obj-$(CONFIG_PPC4xx_OCM)	+= ocm.o
+obj-$(CONFIG_4xx_SOC)		+= soc.o
+obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_PPC4xx_HSTA_MSI)	+= hsta_msi.o
+obj-$(CONFIG_PPC4xx_MSI)	+= msi.o
+obj-$(CONFIG_PPC4xx_CPM)	+= cpm.o
+obj-$(CONFIG_PPC4xx_GPIO)	+= gpio.o

arch/powerpc/platforms/4xx/pci.c

@@ -32,7 +32,7 @@
 #include <asm/dcr-regs.h>
 #include <mm/mmu_decl.h>
 
-#include "ppc4xx_pci.h"
+#include "pci.h"
 
 static int dma_offset_set;
 

arch/powerpc/platforms/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
 obj-$(CONFIG_PPC_CHRP)		+= chrp/
+obj-$(CONFIG_4xx)		+= 4xx/
 obj-$(CONFIG_40x)		+= 40x/
 obj-$(CONFIG_44x)		+= 44x/
 obj-$(CONFIG_PPC_MPC512x)	+= 512x/

arch/powerpc/sysdev/Makefile

@@ -36,19 +36,9 @@ obj-$(CONFIG_AXON_RAM)		+= axonram.o
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
-obj-$(CONFIG_4xx)		+= uic.o
-obj-$(CONFIG_PPC4xx_OCM)	+= ppc4xx_ocm.o
-obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
 obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
 obj-$(CONFIG_XILINX_PCI)	+= xilinx_pci.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
-endif
-obj-$(CONFIG_PPC4xx_HSTA_MSI)	+= ppc4xx_hsta_msi.o
-obj-$(CONFIG_PPC4xx_MSI)	+= ppc4xx_msi.o
-obj-$(CONFIG_PPC4xx_CPM)	+= ppc4xx_cpm.o
-obj-$(CONFIG_PPC4xx_GPIO)	+= ppc4xx_gpio.o
 
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o