renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
Code

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Browse Source 
Jeff Kirsher says:

====================
This series contains updates to ethtool.h, e1000, e1000e, and igb to
implement MDI/MDIx control.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2012-08-22 14:23:43 -07:00
commit bba6ec7e49
9 changed files with 198 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
drivers/net/ethernet/intel/e1000/e1000_ethtool.c
View File

@ -174,6 +174,20 @@ static int e1000_get_settings(struct net_device *netdev,
ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
/* MDI-X => 1; MDI => 0 */
if ((hw->media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ?
ETH_TP_MDI_X :
ETH_TP_MDI);
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
if (hw->mdix == AUTO_ALL_MODES)
ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
ecmd->eth_tp_mdix_ctrl = hw->mdix;
return 0;
}
@ -183,6 +197,22 @@ static int e1000_set_settings(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
/*
* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
if (ecmd->eth_tp_mdix_ctrl) {
if (hw->media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
(ecmd->autoneg != AUTONEG_ENABLE)) {
e_err(drv, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
msleep(1);
@ -199,12 +229,21 @@ static int e1000_set_settings(struct net_device *netdev,
ecmd->advertising = hw->autoneg_advertised;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
/* calling this overrides forced MDI setting */
if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->flags);
return -EINVAL;
}
}
/* MDI-X => 2; MDI => 1; Auto => 3 */
if (ecmd->eth_tp_mdix_ctrl) {
if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->mdix = AUTO_ALL_MODES;
else
hw->mdix = ecmd->eth_tp_mdix_ctrl;
}
/* reset the link */
if (netif_running(adapter->netdev)) {

4
drivers/net/ethernet/intel/e1000/e1000_main.c
View File

@ -4939,6 +4939,10 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
hw->mdix = AUTO_ALL_MODES;
return 0;
err_inval:

41
drivers/net/ethernet/intel/e1000e/ethtool.c
View File

@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev,
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
if (hw->phy.mdix == AUTO_ALL_MODES)
ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
return 0;
}
@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
adapter->hw.phy.mdix = AUTO_ALL_MODES;
return 0;
err_inval:
@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev,
return -EINVAL;
}
/*
* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
if (ecmd->eth_tp_mdix_ctrl) {
if (hw->phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
(ecmd->autoneg != AUTONEG_ENABLE)) {
e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000);
@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev,
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
/* calling this overrides forced MDI setting */
if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL;
}
}
/* MDI-X => 2; MDI => 1; Auto => 3 */
if (ecmd->eth_tp_mdix_ctrl) {
/*
* fix up the value for auto (3 => 0) as zero is mapped
* internally to auto
*/
if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->phy.mdix = AUTO_ALL_MODES;
else
hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
}
/* reset the link */
if (netif_running(adapter->netdev)) {
e1000e_down(adapter);
e1000e_up(adapter);
} else {
} else
e1000e_reset(adapter);
}
clear_bit(__E1000_RESETTING, &adapter->state);
return 0;

31
drivers/net/ethernet/intel/e1000e/phy.c
View File

@ -84,8 +84,9 @@ static const u16 e1000_igp_2_cable_length_table[] = {
#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
/* I82577 PHY Control 2 */
#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200
#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400
#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600
/* I82577 PHY Diagnostics Status */
#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
@ -702,6 +703,32 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
if (ret_val)
return ret_val;
/* Set MDI/MDIX mode */
ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
if (ret_val)
return ret_val;
phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
/*
* Options:
* 0 - Auto (default)
* 1 - MDI mode
* 2 - MDI-X mode
*/
switch (hw->phy.mdix) {
case 1:
break;
case 2:
phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
break;
case 0:
default:
phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
break;
}
ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
if (ret_val)
return ret_val;
return e1000_set_master_slave_mode(hw);
}

29
drivers/net/ethernet/intel/igb/e1000_phy.c
View File

@ -464,6 +464,32 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
if (ret_val)
goto out;
/* Set MDI/MDIX mode */
ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
if (ret_val)
goto out;
phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
/*
* Options:
* 0 - Auto (default)
* 1 - MDI mode
* 2 - MDI-X mode
*/
switch (hw->phy.mdix) {
case 1:
break;
case 2:
phy_data |= I82580_PHY_CTRL2_MANUAL_MDIX;
break;
case 0:
default:
phy_data |= I82580_PHY_CTRL2_AUTO_MDI_MDIX;
break;
}
ret_val = hw->phy.ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
out:
return ret_val;
@ -2246,8 +2272,7 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
if (ret_val)
goto out;
phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK;
ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
if (ret_val)

5
drivers/net/ethernet/intel/igb/e1000_phy.h
View File

@ -111,8 +111,9 @@ s32 igb_check_polarity_m88(struct e1000_hw *hw);
#define I82580_PHY_STATUS2_SPEED_100MBPS 0x0100
/* I82580 PHY Control 2 */
#define I82580_PHY_CTRL2_AUTO_MDIX 0x0400
#define I82580_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
#define I82580_PHY_CTRL2_MANUAL_MDIX 0x0200
#define I82580_PHY_CTRL2_AUTO_MDI_MDIX 0x0400
#define I82580_PHY_CTRL2_MDIX_CFG_MASK 0x0600
/* I82580 PHY Diagnostics Status */
#define I82580_DSTATUS_CABLE_LENGTH 0x03FC

42
drivers/net/ethernet/intel/igb/igb_ethtool.c
View File

@ -198,6 +198,19 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
}
ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if (hw->phy.media_type == e1000_media_type_copper)
ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
if (hw->phy.mdix == AUTO_ALL_MODES)
ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
return 0;
}
@ -214,6 +227,22 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
return -EINVAL;
}
/*
* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
if (ecmd->eth_tp_mdix_ctrl) {
if (hw->phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
(ecmd->autoneg != AUTONEG_ENABLE)) {
dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
}
while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
msleep(1);
@ -227,12 +256,25 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
/* calling this overrides forced MDI setting */
if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
}
/* MDI-X => 2; MDI => 1; Auto => 3 */
if (ecmd->eth_tp_mdix_ctrl) {
/*
* fix up the value for auto (3 => 0) as zero is mapped
* internally to auto
*/
if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->phy.mdix = AUTO_ALL_MODES;
else
hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
}
/* reset the link */
if (netif_running(adapter->netdev)) {
igb_down(adapter);

4
drivers/net/ethernet/intel/igb/igb_main.c
View File

@ -6675,6 +6675,10 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
adapter->hw.phy.mdix = AUTO_ALL_MODES;
return 0;
err_inval:

17
include/linux/ethtool.h
View File

@ -45,8 +45,10 @@ struct ethtool_cmd {
* bits) in Mbps. Please use
* ethtool_cmd_speed()/_set() to
* access it */
__u8 eth_tp_mdix;
__u8 reserved2;
__u8 eth_tp_mdix; /* twisted pair MDI-X status */
__u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
* link should be renegotiated if necessary
*/
__u32 lp_advertising; /* Features the link partner advertises */
__u32 reserved[2];
};
@ -1229,10 +1231,13 @@ struct ethtool_ops {
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
/* Mode MDI or MDI-X */
#define ETH_TP_MDI_INVALID 0x00
#define ETH_TP_MDI 0x01
#define ETH_TP_MDI_X 0x02
/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
* the driver is required to renegotiate link
*/
#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
/* Wake-On-Lan options. */
#define WAKE_PHY (1 << 0)