mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
STM32 DT updates for v5.3, round 1
Highlights: ---------- MPU part: -Add stm32mp157a-avenger board support: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet 10/100/1000, WiFi 5 GHz & 2.4GHz, ... -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on it. -Add I2S and SAI support on stm32mp157c. -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards (EV1 and DK2 inherit of it). -Add camera support: -Add DCMI support on stm32mp157c SOC -Enabled OV5640 camera support on stm32mp157c-ev1 board -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1 board. MCU part: -Add STMFX support en stm32746g-eval and enable connections on it: leds and joystick -----BEGIN PGP SIGNATURE----- iQJMBAABCgA2FiEEctl9+nxzUSUqdELdf5rJavIecIUFAl0M6c8YHGFsZXhhbmRy ZS50b3JndWVAc3QuY29tAAoJEH+ayWryHnCFRfgP/i5BxDdRTYvDKY+DCNDZm/yf Cs4t8Ta25ilAKlCEEig2ZrsROcymwa875AJL+V/HSpY35hQHk6vXaA3iB2lE3VuA RDXnQ17d3ZQ5m6DDt7nsjL2gwfE+XKZKPxBAOLDJxAF5aNhDx85V19cDnvuZDtdl CJk9wAXdwX3BI8VtFFMPUpedFTGgCtccYKVN1U1zYB+GlvyMbm3NZiikJGB6u699 2tg6h2IUf6k569VnrNiNkIVxVuKQdJfOUzuDiVmsq0vItjvRcmXmHO/kdYAkT2ml lsifua1Ef/udL/eF2G8NAuWVSLaEc4XRJ9kxv93fXsTYrotMxxl0raZkmXATIzmr qR10vtbFJCw9LkJjlTQf/kNLGmWl+aMUL7XbOhTBe8Hjn9mMX5v2Ve6TFn03301O UH9lmUXApYAyPKbfnskz8pi8agkfMGW8Y4Ce921BnZ/x7LTelFcUzaymBVX1q+cW lTQYKs+jVA8opfKmbPiCzY4AUpjHUkytwqVx1TXLF2oBxTle2BHGlJiSSozrtK9i zqXb5zyDGj/5Cd6phowMTKZzlIf8MTda33szzS85k6H/t+vnrFBUm6xi4P/ey7Pq 5Vj4oC9ARVNjMFgNnUu25AeD6KB5JVjqtKEtQHku7gP9Vjfuitl5/6vVLN14e9G1 /aJRieeJZZPbZVpjyIrV =3ZUA -----END PGP SIGNATURE----- Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- MPU part: -Add stm32mp157a-avenger board support: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet 10/100/1000, WiFi 5 GHz & 2.4GHz, ... -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on it. -Add I2S and SAI support on stm32mp157c. -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards (EV1 and DK2 inherit of it). -Add camera support: -Add DCMI support on stm32mp157c SOC -Enabled OV5640 camera support on stm32mp157c-ev1 board -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1 board. MCU part: -Add STMFX support en stm32746g-eval and enable connections on it: leds and joystick * tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits) ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A dt-bindings: arm: stm32: Document Avenger96 devicetree binding dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157 ARM: dts: stm32: add sai id registers to stm32mp157c ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1 ARM: dts: stm32: enable display on stm32mp157c-dk1 board ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1 ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board ARM: dts: stm32: add DCMI pins to stm32mp157c ARM: dts: stm32: add DCMI camera interface support on stm32mp157c ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board ARM: dts: stm32: Add Vivante GPU support on STM32MP157c ARM: dts: stm32: add i2s pins muxing on stm32mp157 ARM: dts: stm32: add i2s support on stm32mp157c ARM: dts: stm32: add sai pins muxing on stm32mp157 ARM: dts: stm32: add sai support on stm32mp157c ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1 ... Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
b9569a3cc3
@ -1,10 +0,0 @@
|
||||
STMicroelectronics STM32 Platforms Device Tree Bindings
|
||||
|
||||
Each device tree must specify which STM32 SoC it uses,
|
||||
using one of the following compatible strings:
|
||||
|
||||
st,stm32f429
|
||||
st,stm32f469
|
||||
st,stm32f746
|
||||
st,stm32h743
|
||||
st,stm32mp157
|
||||
31
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
Normal file
31
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
Normal file
@ -0,0 +1,31 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: STMicroelectronics STM32 Platforms Device Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Alexandre Torgue <alexandre.torgue@st.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- const: st,stm32f429
|
||||
|
||||
- items:
|
||||
- const: st,stm32f469
|
||||
|
||||
- items:
|
||||
- const: st,stm32f746
|
||||
|
||||
- items:
|
||||
- const: st,stm32h743
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- arrow,stm32mp157a-avenger96 # Avenger96
|
||||
- const: st,stm32mp157
|
||||
...
|
||||
@ -976,6 +976,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
|
||||
stm32746g-eval.dtb \
|
||||
stm32h743i-eval.dtb \
|
||||
stm32h743i-disco.dtb \
|
||||
stm32mp157a-avenger96.dtb \
|
||||
stm32mp157a-dk1.dtb \
|
||||
stm32mp157c-dk2.dtb \
|
||||
stm32mp157c-ed1.dtb \
|
||||
|
||||
@ -44,6 +44,7 @@
|
||||
#include "stm32f746.dtsi"
|
||||
#include "stm32f746-pinctrl.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32746g-EVAL board";
|
||||
@ -69,9 +70,15 @@
|
||||
gpios = <&gpiof 10 1>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
orange {
|
||||
gpios = <&stmfx_pinctrl 17 1>;
|
||||
};
|
||||
red {
|
||||
gpios = <&gpiob 7 1>;
|
||||
};
|
||||
blue {
|
||||
gpios = <&stmfx_pinctrl 19 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
@ -86,6 +93,43 @@
|
||||
};
|
||||
};
|
||||
|
||||
joystick {
|
||||
compatible = "gpio-keys";
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&joystick_pins>;
|
||||
pinctrl-names = "default";
|
||||
button-0 {
|
||||
label = "JoySel";
|
||||
linux,code = <KEY_ENTER>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
button-1 {
|
||||
label = "JoyDown";
|
||||
linux,code = <KEY_DOWN>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
button-2 {
|
||||
label = "JoyLeft";
|
||||
linux,code = <KEY_LEFT>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
button-3 {
|
||||
label = "JoyRight";
|
||||
linux,code = <KEY_RIGHT>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
button-4 {
|
||||
label = "JoyUp";
|
||||
linux,code = <KEY_UP>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
usbotg_hs_phy: usb-phy {
|
||||
#phy-cells = <0>;
|
||||
compatible = "usb-nop-xceiv";
|
||||
@ -115,6 +159,28 @@
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
stmfx: stmfx@42 {
|
||||
compatible = "st,stmfx-0300";
|
||||
reg = <0x42>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpioi>;
|
||||
|
||||
stmfx_pinctrl: stmfx-pin-controller {
|
||||
compatible = "st,stmfx-0300-pinctrl";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-ranges = <&stmfx_pinctrl 0 0 24>;
|
||||
|
||||
joystick_pins: joystick {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
|
||||
drive-push-pull;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
|
||||
@ -26,6 +26,7 @@
|
||||
st,bank-name = "GPIOA";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
@ -38,6 +39,7 @@
|
||||
st,bank-name = "GPIOB";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
@ -50,6 +52,7 @@
|
||||
st,bank-name = "GPIOC";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
@ -62,6 +65,7 @@
|
||||
st,bank-name = "GPIOD";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
@ -74,6 +78,7 @@
|
||||
st,bank-name = "GPIOE";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
@ -86,6 +91,7 @@
|
||||
st,bank-name = "GPIOF";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
@ -98,6 +104,7 @@
|
||||
st,bank-name = "GPIOG";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
@ -110,6 +117,7 @@
|
||||
st,bank-name = "GPIOH";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
@ -122,6 +130,7 @@
|
||||
st,bank-name = "GPIOI";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 128 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioj: gpio@5000b000 {
|
||||
@ -134,6 +143,7 @@
|
||||
st,bank-name = "GPIOJ";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 144 16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiok: gpio@5000c000 {
|
||||
@ -146,6 +156,7 @@
|
||||
st,bank-name = "GPIOK";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl 0 160 8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cec_pins_a: cec-0 {
|
||||
@ -178,6 +189,47 @@
|
||||
};
|
||||
};
|
||||
|
||||
dcmi_pins_a: dcmi-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
|
||||
<STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
|
||||
<STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
|
||||
<STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
|
||||
<STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
|
||||
<STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
|
||||
<STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
|
||||
<STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
|
||||
<STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
|
||||
<STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
|
||||
<STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
|
||||
<STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
|
||||
<STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
|
||||
<STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
|
||||
<STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
dcmi_sleep_pins_a: dcmi-sleep-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
|
||||
<STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
|
||||
<STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
|
||||
<STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
|
||||
<STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
|
||||
<STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
|
||||
<STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
|
||||
<STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
|
||||
<STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
|
||||
<STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
|
||||
<STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
|
||||
<STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
|
||||
<STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
|
||||
<STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
|
||||
<STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
|
||||
};
|
||||
};
|
||||
|
||||
ethernet0_rgmii_pins_a: rgmii-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
|
||||
@ -241,6 +293,23 @@
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins_b: i2c1-2 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
|
||||
<STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
|
||||
bias-disable;
|
||||
drive-open-drain;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins_sleep_b: i2c1-3 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
|
||||
<STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_a: i2c2-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
|
||||
@ -258,6 +327,21 @@
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_b1: i2c2-2 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
|
||||
bias-disable;
|
||||
drive-open-drain;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_sleep_b1: i2c2-3 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
|
||||
};
|
||||
};
|
||||
|
||||
i2c5_pins_a: i2c5-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
|
||||
@ -276,6 +360,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
i2s2_pins_a: i2s2-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
|
||||
<STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
|
||||
<STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
|
||||
slew-rate = <1>;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s2_pins_sleep_a: i2s2-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
|
||||
<STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
|
||||
<STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
|
||||
};
|
||||
};
|
||||
|
||||
ltdc_pins_a: ltdc-a-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
|
||||
@ -470,6 +573,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
|
||||
};
|
||||
};
|
||||
|
||||
qspi_bk1_pins_a: qspi-bk1-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
|
||||
@ -488,6 +597,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
|
||||
<STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
|
||||
<STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
|
||||
<STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
|
||||
<STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
|
||||
};
|
||||
};
|
||||
|
||||
qspi_bk2_pins_a: qspi-bk2-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
|
||||
@ -506,6 +625,89 @@
|
||||
};
|
||||
};
|
||||
|
||||
qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
|
||||
<STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
|
||||
<STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
|
||||
<STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
|
||||
<STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
|
||||
};
|
||||
};
|
||||
|
||||
sai2a_pins_a: sai2a-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
|
||||
<STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
|
||||
<STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
|
||||
<STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
|
||||
slew-rate = <0>;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sai2a_sleep_pins_a: sai2a-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
|
||||
<STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
|
||||
<STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
|
||||
<STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
|
||||
};
|
||||
};
|
||||
|
||||
sai2b_pins_a: sai2b-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
|
||||
<STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
|
||||
<STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
|
||||
slew-rate = <0>;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sai2b_sleep_pins_a: sai2b-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
|
||||
<STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
|
||||
<STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
|
||||
<STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
|
||||
};
|
||||
};
|
||||
|
||||
sai2b_pins_b: sai2b-2 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sai2b_sleep_pins_b: sai2b-3 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
|
||||
};
|
||||
};
|
||||
|
||||
sai4a_pins_a: sai4a-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
|
||||
slew-rate = <0>;
|
||||
drive-push-pull;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sai4a_sleep_pins_a: sai4a-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
|
||||
@ -599,6 +801,34 @@
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart4_pins_b: uart4-1 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart7_pins_a: uart7-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
|
||||
<STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
|
||||
<STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
@ -621,6 +851,22 @@
|
||||
st,bank-ioport = <11>;
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2_pins_b2: i2c2-0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
|
||||
bias-disable;
|
||||
drive-open-drain;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_sleep_b2: i2c2-1 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins_a: i2c4-0 {
|
||||
|
||||
321
arch/arm/boot/dts/stm32mp157a-avenger96.dts
Normal file
321
arch/arm/boot/dts/stm32mp157a-avenger96.dts
Normal file
@ -0,0 +1,321 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157xac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
/ {
|
||||
model = "Arrow Electronics STM32MP157A Avenger96 board";
|
||||
compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
mmc0 = &sdmmc1;
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart7;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x40000000>;
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
led1 {
|
||||
label = "green:user1";
|
||||
gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "green:user2";
|
||||
gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "green:user3";
|
||||
gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "green:user3";
|
||||
gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led5 {
|
||||
label = "yellow:wifi";
|
||||
gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tx";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led6 {
|
||||
label = "blue:bt";
|
||||
gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "bluetooth-power";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_b>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
st,main-control-register = <0x04>;
|
||||
st,vin-control-register = <0xc0>;
|
||||
st,usb-control-register = <0x30>;
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo2-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo5-supply = <&v3v3>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask_reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
vdda: ldo1 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
v2v8: ldo2 {
|
||||
regulator-name = "v2v8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v8: ldo6 {
|
||||
regulator-name = "v1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-enable-ramp-delay = <300000>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-active-discharge;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
interrupt-parent = <&pmic>;
|
||||
regulator-active-discharge;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
/* On Low speed expansion header */
|
||||
label = "LS-UART0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -7,7 +7,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
#include "stm32mp157xac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
@ -28,6 +28,17 @@
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpu_reserved: gpu@d4000000 {
|
||||
reg = <0xd4000000 0x4000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
blue {
|
||||
@ -51,7 +62,7 @@
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
@ -65,6 +76,47 @@
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
pinctrl-1 = <&i2c1_pins_sleep_a>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
i2c-scl-falling-time-ns = <7>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
hdmi-transmitter@39 {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
iovcc-supply = <&v3v3_hdmi>;
|
||||
cvcc12-supply = <&v1v2_hdmi>;
|
||||
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpiog>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <<dc_pins_a>;
|
||||
pinctrl-1 = <<dc_pins_sleep_a>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sii9022_in: endpoint {
|
||||
remote-endpoint = <<dc_ep0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
@ -223,6 +275,20 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
<dc {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ltdc_ep0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sii9022_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -6,7 +6,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
#include "stm32mp157xaa-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
@ -23,6 +23,17 @@
|
||||
reg = <0xC0000000 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpu_reserved: gpu@e8000000 {
|
||||
reg = <0xe8000000 0x8000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart4;
|
||||
};
|
||||
@ -61,6 +72,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
|
||||
@ -7,6 +7,7 @@
|
||||
|
||||
#include "stm32mp157c-ed1.dts"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
|
||||
@ -21,6 +22,51 @@
|
||||
ethernet0 = ðernet0;
|
||||
};
|
||||
|
||||
clocks {
|
||||
clk_ext_camera: clk-ext-camera {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
joystick {
|
||||
compatible = "gpio-keys";
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&joystick_pins>;
|
||||
pinctrl-names = "default";
|
||||
button-0 {
|
||||
label = "JoySel";
|
||||
linux,code = <KEY_ENTER>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
button-1 {
|
||||
label = "JoyDown";
|
||||
linux,code = <KEY_DOWN>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
button-2 {
|
||||
label = "JoyLeft";
|
||||
linux,code = <KEY_LEFT>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
button-3 {
|
||||
label = "JoyRight";
|
||||
linux,code = <KEY_RIGHT>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
button-4 {
|
||||
label = "JoyUp";
|
||||
linux,code = <KEY_UP>;
|
||||
interrupt-parent = <&stmfx_pinctrl>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
panel_backlight: panel-backlight {
|
||||
compatible = "gpio-backlight";
|
||||
gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
|
||||
@ -35,6 +81,23 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcmi {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&dcmi_pins_a>;
|
||||
pinctrl-1 = <&dcmi_sleep_pins_a>;
|
||||
|
||||
port {
|
||||
dcmi_0: endpoint {
|
||||
remote-endpoint = <&ov5640_0>;
|
||||
bus-width = <8>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -64,6 +127,7 @@
|
||||
reg = <0>;
|
||||
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
|
||||
backlight = <&panel_backlight>;
|
||||
power-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
@ -79,7 +143,7 @@
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
phy-mode = "rgmii-id";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
@ -99,6 +163,60 @@
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
ov5640: camera@3c {
|
||||
compatible = "ovti,ov5640";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ov5640_pins>;
|
||||
reg = <0x3c>;
|
||||
clocks = <&clk_ext_camera>;
|
||||
clock-names = "xclk";
|
||||
DOVDD-supply = <&v2v8>;
|
||||
powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
|
||||
rotation = <180>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
ov5640_0: endpoint {
|
||||
remote-endpoint = <&dcmi_0>;
|
||||
bus-width = <8>;
|
||||
data-shift = <2>; /* lines 9:2 are used */
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
stmfx: stmfx@42 {
|
||||
compatible = "st,stmfx-0300";
|
||||
reg = <0x42>;
|
||||
interrupts = <8 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-parent = <&gpioi>;
|
||||
vdd-supply = <&v3v3>;
|
||||
|
||||
stmfx_pinctrl: stmfx-pin-controller {
|
||||
compatible = "st,stmfx-0300-pinctrl";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-ranges = <&stmfx_pinctrl 0 0 24>;
|
||||
|
||||
joystick_pins: joystick {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
|
||||
drive-push-pull;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
ov5640_pins: camera {
|
||||
pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
@ -131,14 +249,16 @@
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
|
||||
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
|
||||
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash0: mx66l51235l@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <108000000>;
|
||||
@ -147,6 +267,7 @@
|
||||
};
|
||||
|
||||
flash1: mx66l51235l@1 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <108000000>;
|
||||
|
||||
@ -365,6 +365,17 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s2: audio-controller@4000b000 {
|
||||
compatible = "st,stm32h7-i2s";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x4000b000 0x400>;
|
||||
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dmamux1 39 0x400 0x01>,
|
||||
<&dmamux1 40 0x400 0x01>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi3: spi@4000c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -379,6 +390,17 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s3: audio-controller@4000c000 {
|
||||
compatible = "st,stm32h7-i2s";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x4000c000 0x400>;
|
||||
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dmamux1 61 0x400 0x01>,
|
||||
<&dmamux1 62 0x400 0x01>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spdifrx: audio-controller@4000d000 {
|
||||
compatible = "st,stm32h7-spdifrx";
|
||||
#sound-dai-cells = <0>;
|
||||
@ -607,6 +629,17 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s1: audio-controller@44004000 {
|
||||
compatible = "st,stm32h7-i2s";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x44004000 0x400>;
|
||||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dmamux1 37 0x400 0x01>,
|
||||
<&dmamux1 38 0x400 0x01>;
|
||||
dma-names = "rx", "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi4: spi@44005000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@ -708,6 +741,100 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai1: sai@4400a000 {
|
||||
compatible = "st,stm32h7-sai";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x4400a000 0x400>;
|
||||
reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
|
||||
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&rcc SAI1_R>;
|
||||
status = "disabled";
|
||||
|
||||
sai1a: audio-controller@4400a004 {
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
compatible = "st,stm32-sai-sub-a";
|
||||
reg = <0x4 0x1c>;
|
||||
clocks = <&rcc SAI1_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 87 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai1b: audio-controller@4400a024 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-b";
|
||||
reg = <0x24 0x1c>;
|
||||
clocks = <&rcc SAI1_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 88 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
sai2: sai@4400b000 {
|
||||
compatible = "st,stm32h7-sai";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x4400b000 0x400>;
|
||||
reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
|
||||
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&rcc SAI2_R>;
|
||||
status = "disabled";
|
||||
|
||||
sai2a: audio-controller@4400b004 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-a";
|
||||
reg = <0x4 0x1c>;
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 89 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai2b: audio-controller@4400b024 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-b";
|
||||
reg = <0x24 0x1c>;
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 90 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
sai3: sai@4400c000 {
|
||||
compatible = "st,stm32h7-sai";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x4400c000 0x400>;
|
||||
reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
|
||||
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&rcc SAI3_R>;
|
||||
status = "disabled";
|
||||
|
||||
sai3a: audio-controller@4400c004 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-a";
|
||||
reg = <0x04 0x1c>;
|
||||
clocks = <&rcc SAI3_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 113 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai3b: audio-controller@4400c024 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-b";
|
||||
reg = <0x24 0x1c>;
|
||||
clocks = <&rcc SAI3_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 114 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
dfsdm: dfsdm@4400d000 {
|
||||
compatible = "st,stm32mp1-dfsdm";
|
||||
reg = <0x4400d000 0x800>;
|
||||
@ -914,6 +1041,18 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dcmi: dcmi@4c006000 {
|
||||
compatible = "st,stm32-dcmi";
|
||||
reg = <0x4c006000 0x400>;
|
||||
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&rcc CAMITF_R>;
|
||||
clocks = <&rcc DCMI>;
|
||||
clock-names = "mclk";
|
||||
dmas = <&dmamux1 75 0x400 0x0d>;
|
||||
dma-names = "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rcc: rcc@50000000 {
|
||||
compatible = "st,stm32mp1-rcc", "syscon";
|
||||
reg = <0x50000000 0x1000>;
|
||||
@ -1020,6 +1159,37 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai4: sai@50027000 {
|
||||
compatible = "st,stm32h7-sai";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x50027000 0x400>;
|
||||
reg = <0x50027000 0x4>, <0x500273f0 0x10>;
|
||||
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
||||
resets = <&rcc SAI4_R>;
|
||||
status = "disabled";
|
||||
|
||||
sai4a: audio-controller@50027004 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-a";
|
||||
reg = <0x04 0x1c>;
|
||||
clocks = <&rcc SAI4_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 99 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai4b: audio-controller@50027024 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "st,stm32-sai-sub-b";
|
||||
reg = <0x24 0x1c>;
|
||||
clocks = <&rcc SAI4_K>;
|
||||
clock-names = "sai_ck";
|
||||
dmas = <&dmamux1 100 0x400 0x01>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
dts: thermal@50028000 {
|
||||
compatible = "st,stm32-thermal";
|
||||
reg = <0x50028000 0x100>;
|
||||
@ -1149,6 +1319,16 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpu: gpu@59000000 {
|
||||
compatible = "vivante,gc";
|
||||
reg = <0x59000000 0x800>;
|
||||
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc GPU>, <&rcc GPU_K>;
|
||||
clock-names = "bus" ,"core";
|
||||
resets = <&rcc GPU_R>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dsi: dsi@5a000000 {
|
||||
compatible = "st,stm32-dsi";
|
||||
reg = <0x5a000000 0x800>;
|
||||
|
||||
90
arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
Normal file
90
arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
Normal file
@ -0,0 +1,90 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 128 16>;
|
||||
};
|
||||
|
||||
gpioj: gpio@5000b000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 144 16>;
|
||||
};
|
||||
|
||||
gpiok: gpio@5000c000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl 0 160 8>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
62
arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
Normal file
62
arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
Normal file
@ -0,0 +1,62 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AB>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
78
arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
Normal file
78
arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
Normal file
@ -0,0 +1,78 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <12>;
|
||||
gpio-ranges = <&pinctrl 0 128 12>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
62
arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
Normal file
62
arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
Normal file
@ -0,0 +1,62 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AD>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user