2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00

net: phy: add GBit master / slave error detection

Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Heiner Kallweit 2018-07-21 15:48:47 +02:00 committed by David S. Miller
parent 7836899c34
commit b8f8c8eb40
2 changed files with 9 additions and 0 deletions

View File

@ -1555,6 +1555,14 @@ int genphy_read_status(struct phy_device *phydev)
if (adv < 0)
return adv;
if (lpagb & LPA_1000MSFAIL) {
if (adv & CTL1000_ENABLE_MASTER)
phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
else
phydev_err(phydev, "Master/Slave resolution failed\n");
return -ENOLINK;
}
phydev->lp_advertising =
mii_stat1000_to_ethtool_lpa_t(lpagb);
common_adv_gb = lpagb & adv << 2;

View File

@ -136,6 +136,7 @@
#define CTL1000_ENABLE_MASTER 0x1000
/* 1000BASE-T Status register */
#define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */
#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */