2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00

drivers/video: fsl-diu-fb: move some definitions out of the header file

Move several macros and structures from the Freescale DIU driver's header
file into the source file, because they're only used by that file.  Also
delete a few unused macros.

The diu and diu_ad structures cannot be moved because they're being used
by the MPC5121 platform file.  A future patch eliminate the need for
the platform file to access these structs, so they'll be moved also.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
This commit is contained in:
Timur Tabi 2011-09-28 16:19:48 -05:00 committed by Florian Tobias Schandinat
parent 36b0b1d415
commit b715f9f04c
2 changed files with 39 additions and 47 deletions

View File

@ -30,11 +30,50 @@
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */
/* 1 for plane 0, 2 for plane 1&2 each */
/* HW cursor parameters */
#define MAX_CURS 32
/* INT_STATUS/INT_MASK field descriptions */
#define INT_VSYNC 0x01 /* Vsync interrupt */
#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
#define INT_UNDRUN 0x04 /* Under run exception interrupt */
#define INT_PARERR 0x08 /* Display parameters error interrupt */
#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
/* Panels'operation modes */
#define MFB_TYPE_OUTPUT 0 /* Panel output to display */
#define MFB_TYPE_OFF 1 /* Panel off */
#define MFB_TYPE_WB 2 /* Panel written back to memory */
#define MFB_TYPE_TEST 3 /* Panel generate color bar */
struct diu_hw {
struct diu __iomem *diu_reg;
spinlock_t reg_lock;
unsigned int mode; /* DIU operation mode */
};
struct diu_addr {
void *vaddr; /* Virtual address */
dma_addr_t paddr; /* Physical address */
__u32 offset;
};
struct diu_pool {
struct diu_addr ad;
struct diu_addr gamma;
struct diu_addr pallete;
struct diu_addr cursor;
};
/*
* List of supported video modes
*

View File

@ -56,7 +56,6 @@ struct aoi_display_offset {
#define MFB_GET_PIXFMT_OLD 0x40014d08
#ifdef __KERNEL__
#include <linux/spinlock.h>
/*
* These are the fields of area descriptor(in DDR memory) for every plane
@ -154,39 +153,6 @@ struct diu {
__be32 plut;
} __attribute__ ((packed));
struct diu_hw {
struct diu *diu_reg;
spinlock_t reg_lock;
__u32 mode; /* DIU operation mode */
};
struct diu_addr {
void *vaddr; /* Virtual address */
dma_addr_t paddr; /* Physical address */
__u32 offset;
};
struct diu_pool {
struct diu_addr ad;
struct diu_addr gamma;
struct diu_addr pallete;
struct diu_addr cursor;
};
#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of DIU */
#define INT_LCDC 64 /* DIU interrupt number */
#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */
/* 1 for plane 0, 2 for plane 1&2 each */
/* Minimum X and Y resolutions */
#define MIN_XRES 64
#define MIN_YRES 64
/* HW cursor parameters */
#define MAX_CURS 32
/* Modes of operation of DIU */
#define MFB_MODE0 0 /* DIU off */
#define MFB_MODE1 1 /* All three planes output to display */
@ -194,18 +160,5 @@ struct diu_pool {
#define MFB_MODE3 3 /* All three planes written back to memory */
#define MFB_MODE4 4 /* Color bar generation */
/* INT_STATUS/INT_MASK field descriptions */
#define INT_VSYNC 0x01 /* Vsync interrupt */
#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
#define INT_UNDRUN 0x04 /* Under run exception interrupt */
#define INT_PARERR 0x08 /* Display parameters error interrupt */
#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
/* Panels'operation modes */
#define MFB_TYPE_OUTPUT 0 /* Panel output to display */
#define MFB_TYPE_OFF 1 /* Panel off */
#define MFB_TYPE_WB 2 /* Panel written back to memory */
#define MFB_TYPE_TEST 3 /* Panel generate color bar */
#endif /* __KERNEL__ */
#endif /* __FSL_DIU_FB_H__ */