renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code

ARM: Kirkwood: Convert all DT boards to EHCI via DT.

Browse Source 
Now that the EHCI driver has DT support, drop old style configuration
of it and add DT in its place. Since all the boards enable the EHCI,
enable it by default in kirkwood.dtsi. Any new boards which don't have
USB can specifically disable it.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Andrew Lunn 2012-10-20 13:10:01 +02:00 committed by Jason Cooper
parent 77dae54ab3
commit b6cf80704d
11 changed files with 7 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/boot/dts/kirkwood.dtsi
View File

@ -77,6 +77,13 @@
status = "okay";
};
ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
status = "okay";
};
sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;

1
arch/arm/mach-kirkwood/board-dnskw.c
View File

@ -78,7 +78,6 @@ void __init dnskw_init(void)
{
kirkwood_mpp_conf(dnskw_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
/* Register power-off GPIO. */

1
arch/arm/mach-kirkwood/board-dockstar.c
View File

@ -55,7 +55,6 @@ void __init dockstar_dt_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
}

1
arch/arm/mach-kirkwood/board-dreamplug.c
View File

@ -64,7 +64,6 @@ void __init dreamplug_init(void)
*/
kirkwood_mpp_conf(dreamplug_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);

1
arch/arm/mach-kirkwood/board-goflexnet.c
View File

@ -65,7 +65,6 @@ void __init goflexnet_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&goflexnet_ge00_data);
}

1
arch/arm/mach-kirkwood/board-ib62x0.c
View File

@ -61,7 +61,6 @@ void __init ib62x0_init(void)
*/
kirkwood_mpp_conf(ib62x0_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)

1
arch/arm/mach-kirkwood/board-iconnect.c
View File

@ -45,7 +45,6 @@ void __init iconnect_init(void)
{
kirkwood_mpp_conf(iconnect_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}

2
arch/arm/mach-kirkwood/board-iomega_ix2_200.c
View File

@ -51,7 +51,5 @@ void __init iomega_ix2_200_init(void)
*/
kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
kirkwood_ehci_init();
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
}

1
arch/arm/mach-kirkwood/board-km_kirkwood.c
View File

@ -52,6 +52,5 @@ void __init km_kirkwood_init(void)
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
kirkwood_ehci_init();
kirkwood_ge00_init(&km_kirkwood_ge00_data);
}

1
arch/arm/mach-kirkwood/board-lsxl.c
View File

@ -75,7 +75,6 @@ void __init lsxl_init(void)
gpio_set_value(LSXL_GPIO_USB_POWER, 1);
gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
kirkwood_ehci_init();
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);

1
arch/arm/mach-kirkwood/board-ts219.c
View File

@ -66,7 +66,6 @@ void __init qnap_dt_ts219_init(void)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
kirkwood_ehci_init();
pm_power_off = qnap_tsx1x_power_off;
}