From af79ef726ad605030ce1870cdeede0e687e1622a Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Wed, 22 May 2019 00:20:52 -0700 Subject: [PATCH] ARM: dts: vf610-zii-dev: Add QSPI node Both rev C and rev B of the board come with two QSPI-NOR chips attached to the SoC. Add DT code describing all of this. Signed-off-by: Andrey Smirnov Cc: Shawn Guo Cc: Chris Healy Cc: Andrew Lunn Cc: Fabio Estevam Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-dev.dtsi | 48 ++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 1f2e65ae2bd6..a1b4ccee2a10 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -177,6 +177,36 @@ status = "okay"; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + /* + * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR + * modes, so, spi-max-frequency is limited to 90MHz + */ + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <0>; + m25p,fast-read; + }; + + flash@2 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <2>; + m25p,fast-read; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -360,12 +390,18 @@ pinctrl_qspi0: qspi0grp { fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2 + VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2 + VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3 + VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2 + VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2 + VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3 >; };