2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 02:04:05 +08:00

ALSA: usb-audio: Allow any MIDI endpoint to drive use of interrupt transfer on newer Roland devices

This patch enables interrupt transfer mode for MIDI ports on newer
Boss/Roland devices such as the GT-100/001 which support interrupt
transfer on both IN and OUT MIDI endpoints. Previously this wasn't being
enabled for these devices as the code was specifically looking for the
scenario where the IN endpoint supported interrupt transfer and the OUT
endpoint was bulk transfer. Newer devices support interrupt transfer for
both endpoints.

This has been tested on Boss devices GT-001, BR-80 and JS-8 and Roland
VS-20.

It would benefit from some regresison testing with other devices if
possible.

Signed-off-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Keith A. Milner 2015-10-11 15:19:48 +01:00 committed by Takashi Iwai
parent 2a7e1713cd
commit ac77423609

View File

@ -1903,11 +1903,14 @@ static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi *umidi)
hostif = &intf->altsetting[1];
intfd = get_iface_desc(hostif);
/* If either or both of the endpoints support interrupt transfer,
* then use the alternate setting
*/
if (intfd->bNumEndpoints != 2 ||
(get_endpoint(hostif, 0)->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK ||
(get_endpoint(hostif, 1)->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
!((get_endpoint(hostif, 0)->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT ||
(get_endpoint(hostif, 1)->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT))
return;
dev_dbg(&umidi->dev->dev, "switching to altsetting %d with int ep\n",