renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
Code

Merge commit 'v2.6.29-rc1' into core/urgent

Browse Source
This commit is contained in:
Ingo Molnar 2009-01-11 03:41:39 +01:00
commit abede81c4f
1595 changed files with 116589 additions and 30482 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
CREDITS
View File

@ -464,6 +464,11 @@ S: 1200 Goldenrod Dr.
S: Nampa, Idaho 83686
S: USA
N: Dirk J. Brandewie
E: dirk.j.brandewie@intel.com
E: linux-wimax@intel.com
D: Intel Wireless WiMAX Connection 2400 SDIO driver
N: Derrick J. Brashear
E: shadow@dementia.org
W: http://www.dementia.org/~shadow
@ -2119,6 +2124,11 @@ N: H.J. Lu
E: hjl@gnu.ai.mit.edu
D: GCC + libraries hacker
N: Yanir Lubetkin
E: yanirx.lubatkin@intel.com
E: linux-wimax@intel.com
D: Intel Wireless WiMAX Connection 2400 driver
N: Michal Ludvig
E: michal@logix.cz
E: michal.ludvig@asterisk.co.nz
@ -2693,6 +2703,13 @@ S: RR #5, 497 Pole Line Road
S: Thunder Bay, Ontario
S: CANADA P7C 5M9
N: Inaky Perez-Gonzalez
E: inaky.perez-gonzalez@intel.com
E: linux-wimax@intel.com
E: inakypg@yahoo.com
D: WiMAX stack
D: Intel Wireless WiMAX Connection 2400 driver
N: Yuri Per
E: yuri@pts.mipt.ru
D: Some smbfs fixes

136
Documentation/ABI/testing/sysfs-class-regulator
View File

@ -3,8 +3,9 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
state. This holds the regulator output state.
Some regulator directories will contain a field called
state. This reports the regulator enable status, for
regulators which can report that value.
This will be one of the following strings:
@ -18,7 +19,8 @@ Description:
'disabled' means the regulator output is OFF and is not
supplying power to the system..
'unknown' means software cannot determine the state.
'unknown' means software cannot determine the state, or
the reported state is invalid.
NOTE: this field can be used in conjunction with microvolts
and microamps to determine regulator output levels.
@ -53,9 +55,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
microvolts. This holds the regulator output voltage setting
measured in microvolts (i.e. E-6 Volts).
measured in microvolts (i.e. E-6 Volts), for regulators
which can report that voltage.
NOTE: This value should not be used to determine the regulator
output voltage level as this value is the same regardless of
@ -67,9 +70,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
microamps. This holds the regulator output current limit
setting measured in microamps (i.e. E-6 Amps).
setting measured in microamps (i.e. E-6 Amps), for regulators
which can report that current.
NOTE: This value should not be used to determine the regulator
output current level as this value is the same regardless of
@ -81,8 +85,9 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
opmode. This holds the regulator operating mode setting.
Some regulator directories will contain a field called
opmode. This holds the current regulator operating mode,
for regulators which can report it.
The opmode value can be one of the following strings:
@ -92,7 +97,7 @@ Description:
'standby'
'unknown'
The modes are described in include/linux/regulator/regulator.h
The modes are described in include/linux/regulator/consumer.h
NOTE: This value should not be used to determine the regulator
output operating mode as this value is the same regardless of
@ -104,9 +109,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
min_microvolts. This holds the minimum safe working regulator
output voltage setting for this domain measured in microvolts.
output voltage setting for this domain measured in microvolts,
for regulators which support voltage constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no min microvolts constraint defined by
@ -118,9 +124,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
max_microvolts. This holds the maximum safe working regulator
output voltage setting for this domain measured in microvolts.
output voltage setting for this domain measured in microvolts,
for regulators which support voltage constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no max microvolts constraint defined by
@ -132,10 +139,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
min_microamps. This holds the minimum safe working regulator
output current limit setting for this domain measured in
microamps.
microamps, for regulators which support current constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no min microamps constraint defined by
@ -147,10 +154,10 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
max_microamps. This holds the maximum safe working regulator
output current limit setting for this domain measured in
microamps.
microamps, for regulators which support current constraints.
NOTE: this will return the string 'constraint not defined' if
the power domain has no max microamps constraint defined by
@ -185,7 +192,7 @@ Date: April 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
requested_microamps. This holds the total requested load
current in microamps for this regulator from all its consumer
devices.
@ -204,125 +211,102 @@ Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_mem_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
the system is suspended to memory.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to memory voltage defined by
platform code.
the system is suspended to memory, for voltage regulators
implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_disk_microvolts
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_disk_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
the system is suspended to disk.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to disk voltage defined by
platform code.
the system is suspended to disk, for voltage regulators
implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_standby_microvolts
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_standby_microvolts. This holds the regulator output
voltage setting for this domain measured in microvolts when
the system is suspended to standby.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to standby voltage defined by
platform code.
the system is suspended to standby, for voltage regulators
implementing suspend voltage configuration constraints.
What: /sys/class/regulator/.../suspend_mem_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_mem_mode. This holds the regulator operating mode
setting for this domain when the system is suspended to
memory.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to memory mode defined by
platform code.
memory, for regulators implementing suspend mode
configuration constraints.
What: /sys/class/regulator/.../suspend_disk_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_disk_mode. This holds the regulator operating mode
setting for this domain when the system is suspended to disk.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to disk mode defined by
platform code.
setting for this domain when the system is suspended to disk,
for regulators implementing suspend mode configuration
constraints.
What: /sys/class/regulator/.../suspend_standby_mode
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_standby_mode. This holds the regulator operating mode
setting for this domain when the system is suspended to
standby.
NOTE: this will return the string 'not defined' if
the power domain has no suspend to standby mode defined by
platform code.
standby, for regulators implementing suspend mode
configuration constraints.
What: /sys/class/regulator/.../suspend_mem_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_mem_state. This holds the regulator operating state
when suspended to memory.
when suspended to memory, for regulators implementing suspend
configuration constraints.
This will be one of the following strings:
'enabled'
'disabled'
'not defined'
This will be one of the same strings reported by
the "state" attribute.
What: /sys/class/regulator/.../suspend_disk_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_disk_state. This holds the regulator operating state
when suspended to disk.
when suspended to disk, for regulators implementing
suspend configuration constraints.
This will be one of the following strings:
'enabled'
'disabled'
'not defined'
This will be one of the same strings reported by
the "state" attribute.
What: /sys/class/regulator/.../suspend_standby_state
Date: May 2008
KernelVersion: 2.6.26
Contact: Liam Girdwood <lrg@slimlogic.co.uk>
Description:
Each regulator directory will contain a field called
Some regulator directories will contain a field called
suspend_standby_state. This holds the regulator operating
state when suspended to standby.
state when suspended to standby, for regulators implementing
suspend configuration constraints.
This will be one of the following strings:
'enabled'
'disabled'
'not defined'
This will be one of the same strings reported by
the "state" attribute.

2
Documentation/DocBook/Makefile
View File

@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
mac80211.xml debugobjects.xml sh.xml
mac80211.xml debugobjects.xml sh.xml regulator.xml
###
# The build process is as follows (targets):

8
Documentation/DocBook/networking.tmpl
View File

@ -74,6 +74,14 @@
!Enet/sunrpc/rpcb_clnt.c
!Enet/sunrpc/clnt.c
</sect1>
<sect1><title>WiMAX</title>
!Enet/wimax/op-msg.c
!Enet/wimax/op-reset.c
!Enet/wimax/op-rfkill.c
!Enet/wimax/stack.c
!Iinclude/net/wimax.h
!Iinclude/linux/wimax.h
</sect1>
</chapter>
<chapter id="netdev">

304
Documentation/DocBook/regulator.tmpl Normal file
View File

@ -0,0 +1,304 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="regulator-api">
<bookinfo>
<title>Voltage and current regulator API</title>
<authorgroup>
<author>
<firstname>Liam</firstname>
<surname>Girdwood</surname>
<affiliation>
<address>
<email>lrg@slimlogic.co.uk</email>
</address>
</affiliation>
</author>
<author>
<firstname>Mark</firstname>
<surname>Brown</surname>
<affiliation>
<orgname>Wolfson Microelectronics</orgname>
<address>
<email>broonie@opensource.wolfsonmicro.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<copyright>
<year>2007-2008</year>
<holder>Wolfson Microelectronics</holder>
</copyright>
<copyright>
<year>2008</year>
<holder>Liam Girdwood</holder>
</copyright>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License version 2 as published by the Free Software Foundation.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="intro">
<title>Introduction</title>
<para>
This framework is designed to provide a standard kernel
interface to control voltage and current regulators.
</para>
<para>
The intention is to allow systems to dynamically control
regulator power output in order to save power and prolong
battery life. This applies to both voltage regulators (where
voltage output is controllable) and current sinks (where current
limit is controllable).
</para>
<para>
Note that additional (and currently more complete) documentation
is available in the Linux kernel source under
<filename>Documentation/power/regulator</filename>.
</para>
<sect1 id="glossary">
<title>Glossary</title>
<para>
The regulator API uses a number of terms which may not be
familiar:
</para>
<glossary>
<glossentry>
<glossterm>Regulator</glossterm>
<glossdef>
<para>
Electronic device that supplies power to other devices. Most
regulators can enable and disable their output and some can also
control their output voltage or current.
</para>
</glossdef>
</glossentry>
<glossentry>
<glossterm>Consumer</glossterm>
<glossdef>
<para>
Electronic device which consumes power provided by a regulator.
These may either be static, requiring only a fixed supply, or
dynamic, requiring active management of the regulator at
runtime.
</para>
</glossdef>
</glossentry>
<glossentry>
<glossterm>Power Domain</glossterm>
<glossdef>
<para>
The electronic circuit supplied by a given regulator, including
the regulator and all consumer devices. The configuration of
the regulator is shared between all the components in the
circuit.
</para>
</glossdef>
</glossentry>
<glossentry>
<glossterm>Power Management Integrated Circuit</glossterm>
<acronym>PMIC</acronym>
<glossdef>
<para>
An IC which contains numerous regulators and often also other
subsystems. In an embedded system the primary PMIC is often
equivalent to a combination of the PSU and southbridge in a
desktop system.
</para>
</glossdef>
</glossentry>
</glossary>
</sect1>
</chapter>
<chapter id="consumer">
<title>Consumer driver interface</title>
<para>
This offers a similar API to the kernel clock framework.
Consumer drivers use <link
linkend='API-regulator-get'>get</link> and <link
linkend='API-regulator-put'>put</link> operations to acquire and
release regulators. Functions are
provided to <link linkend='API-regulator-enable'>enable</link>
and <link linkend='API-regulator-disable'>disable</link> the
reguator and to get and set the runtime parameters of the
regulator.
</para>
<para>
When requesting regulators consumers use symbolic names for their
supplies, such as "Vcc", which are mapped into actual regulator
devices by the machine interface.
</para>
<para>
A stub version of this API is provided when the regulator
framework is not in use in order to minimise the need to use
ifdefs.
</para>
<sect1 id="consumer-enable">
<title>Enabling and disabling</title>
<para>
The regulator API provides reference counted enabling and
disabling of regulators. Consumer devices use the <function><link
linkend='API-regulator-enable'>regulator_enable</link></function>
and <function><link
linkend='API-regulator-disable'>regulator_disable</link>
</function> functions to enable and disable regulators. Calls
to the two functions must be balanced.
</para>
<para>
Note that since multiple consumers may be using a regulator and
machine constraints may not allow the regulator to be disabled
there is no guarantee that calling
<function>regulator_disable</function> will actually cause the
supply provided by the regulator to be disabled. Consumer
drivers should assume that the regulator may be enabled at all
times.
</para>
</sect1>
<sect1 id="consumer-config">
<title>Configuration</title>
<para>
Some consumer devices may need to be able to dynamically
configure their supplies. For example, MMC drivers may need to
select the correct operating voltage for their cards. This may
be done while the regulator is enabled or disabled.
</para>
<para>
The <function><link
linkend='API-regulator-set-voltage'>regulator_set_voltage</link>
</function> and <function><link
linkend='API-regulator-set-current-limit'
>regulator_set_current_limit</link>
</function> functions provide the primary interface for this.
Both take ranges of voltages and currents, supporting drivers
that do not require a specific value (eg, CPU frequency scaling
normally permits the CPU to use a wider range of supply
voltages at lower frequencies but does not require that the
supply voltage be lowered). Where an exact value is required
both minimum and maximum values should be identical.
</para>
</sect1>
<sect1 id="consumer-callback">
<title>Callbacks</title>
<para>
Callbacks may also be <link
linkend='API-regulator-register-notifier'>registered</link>
for events such as regulation failures.
</para>
</sect1>
</chapter>
<chapter id="driver">
<title>Regulator driver interface</title>
<para>
Drivers for regulator chips <link
linkend='API-regulator-register'>register</link> the regulators
with the regulator core, providing operations structures to the
core. A <link
linkend='API-regulator-notifier-call-chain'>notifier</link> interface
allows error conditions to be reported to the core.
</para>
<para>
Registration should be triggered by explicit setup done by the
platform, supplying a <link
linkend='API-struct-regulator-init-data'>struct
regulator_init_data</link> for the regulator containing
<link linkend='machine-constraint'>constraint</link> and
<link linkend='machine-supply'>supply</link> information.
</para>
</chapter>
<chapter id="machine">
<title>Machine interface</title>
<para>
This interface provides a way to define how regulators are
connected to consumers on a given system and what the valid
operating parameters are for the system.
</para>
<sect1 id="machine-supply">
<title>Supplies</title>
<para>
Regulator supplies are specified using <link
linkend='API-struct-regulator-consumer-supply'>struct
regulator_consumer_supply</link>. This is done at
<link linkend='driver'>driver registration
time</link> as part of the machine constraints.
</para>
</sect1>
<sect1 id="machine-constraint">
<title>Constraints</title>
<para>
As well as definining the connections the machine interface
also provides constraints definining the operations that
clients are allowed to perform and the parameters that may be
set. This is required since generally regulator devices will
offer more flexibility than it is safe to use on a given
system, for example supporting higher supply voltages than the
consumers are rated for.
</para>
<para>
This is done at <link linkend='driver'>driver
registration time</link> by providing a <link
linkend='API-struct-regulation-constraints'>struct
regulation_constraints</link>.
</para>
<para>
The constraints may also specify an initial configuration for the
regulator in the constraints, which is particularly useful for
use with static consumers.
</para>
</sect1>
</chapter>
<chapter id="api">
<title>API reference</title>
<para>
Due to limitations of the kernel documentation framework and the
existing layout of the source code the entire regulator API is
documented here.
</para>
!Iinclude/linux/regulator/consumer.h
!Iinclude/linux/regulator/machine.h
!Iinclude/linux/regulator/driver.h
!Edrivers/regulator/core.c
</chapter>
</book>

3
Documentation/PCI/pci.txt
View File

@ -294,7 +294,8 @@ NOTE: pci_enable_device() can fail! Check the return value.
pci_set_master() will enable DMA by setting the bus master bit
in the PCI_COMMAND register. It also fixes the latency timer value if
it's set to something bogus by the BIOS.
it's set to something bogus by the BIOS. pci_clear_master() will
disable DMA by clearing the bus master bit.
If the PCI device can use the PCI Memory-Write-Invalidate transaction,
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval

2
Documentation/RCU/00-INDEX
View File

@ -12,6 +12,8 @@ rcuref.txt
- Reference-count design for elements of lists/arrays protected by RCU
rcu.txt
- RCU Concepts
rcubarrier.txt
- Unloading modules that use RCU callbacks
RTFP.txt
- List of RCU papers (bibliography) going back to 1980.
torture.txt

304
Documentation/RCU/rcubarrier.txt Normal file
View File

@ -0,0 +1,304 @@
RCU and Unloadable Modules
[Originally published in LWN Jan. 14, 2007: http://lwn.net/Articles/217484/]
RCU (read-copy update) is a synchronization mechanism that can be thought
of as a replacement for read-writer locking (among other things), but with
very low-overhead readers that are immune to deadlock, priority inversion,
and unbounded latency. RCU read-side critical sections are delimited
by rcu_read_lock() and rcu_read_unlock(), which, in non-CONFIG_PREEMPT
kernels, generate no code whatsoever.
This means that RCU writers are unaware of the presence of concurrent
readers, so that RCU updates to shared data must be undertaken quite
carefully, leaving an old version of the data structure in place until all
pre-existing readers have finished. These old versions are needed because
such readers might hold a reference to them. RCU updates can therefore be
rather expensive, and RCU is thus best suited for read-mostly situations.
How can an RCU writer possibly determine when all readers are finished,
given that readers might well leave absolutely no trace of their
presence? There is a synchronize_rcu() primitive that blocks until all
pre-existing readers have completed. An updater wishing to delete an
element p from a linked list might do the following, while holding an
appropriate lock, of course:
list_del_rcu(p);
synchronize_rcu();
kfree(p);
But the above code cannot be used in IRQ context -- the call_rcu()
primitive must be used instead. This primitive takes a pointer to an
rcu_head struct placed within the RCU-protected data structure and
another pointer to a function that may be invoked later to free that
structure. Code to delete an element p from the linked list from IRQ
context might then be as follows:
list_del_rcu(p);
call_rcu(&p->rcu, p_callback);
Since call_rcu() never blocks, this code can safely be used from within
IRQ context. The function p_callback() might be defined as follows:
static void p_callback(struct rcu_head *rp)
{
struct pstruct *p = container_of(rp, struct pstruct, rcu);
kfree(p);
}
Unloading Modules That Use call_rcu()
But what if p_callback is defined in an unloadable module?
If we unload the module while some RCU callbacks are pending,
the CPUs executing these callbacks are going to be severely
disappointed when they are later invoked, as fancifully depicted at
http://lwn.net/images/ns/kernel/rcu-drop.jpg.
We could try placing a synchronize_rcu() in the module-exit code path,
but this is not sufficient. Although synchronize_rcu() does wait for a
grace period to elapse, it does not wait for the callbacks to complete.
One might be tempted to try several back-to-back synchronize_rcu()
calls, but this is still not guaranteed to work. If there is a very
heavy RCU-callback load, then some of the callbacks might be deferred
in order to allow other processing to proceed. Such deferral is required
in realtime kernels in order to avoid excessive scheduling latencies.
rcu_barrier()
We instead need the rcu_barrier() primitive. This primitive is similar
to synchronize_rcu(), but instead of waiting solely for a grace
period to elapse, it also waits for all outstanding RCU callbacks to
complete. Pseudo-code using rcu_barrier() is as follows:
1. Prevent any new RCU callbacks from being posted.
2. Execute rcu_barrier().
3. Allow the module to be unloaded.
Quick Quiz #1: Why is there no srcu_barrier()?
The rcutorture module makes use of rcu_barrier in its exit function
as follows:
1 static void
2 rcu_torture_cleanup(void)
3 {
4 int i;
5
6 fullstop = 1;
7 if (shuffler_task != NULL) {
8 VERBOSE_PRINTK_STRING("Stopping rcu_torture_shuffle task");
9 kthread_stop(shuffler_task);
10 }
11 shuffler_task = NULL;
12
13 if (writer_task != NULL) {
14 VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task");
15 kthread_stop(writer_task);
16 }
17 writer_task = NULL;
18
19 if (reader_tasks != NULL) {
20 for (i = 0; i < nrealreaders; i++) {
21 if (reader_tasks[i] != NULL) {
22 VERBOSE_PRINTK_STRING(
23 "Stopping rcu_torture_reader task");
24 kthread_stop(reader_tasks[i]);
25 }
26 reader_tasks[i] = NULL;
27 }
28 kfree(reader_tasks);
29 reader_tasks = NULL;
30 }
31 rcu_torture_current = NULL;
32
33 if (fakewriter_tasks != NULL) {
34 for (i = 0; i < nfakewriters; i++) {
35 if (fakewriter_tasks[i] != NULL) {
36 VERBOSE_PRINTK_STRING(
37 "Stopping rcu_torture_fakewriter task");
38 kthread_stop(fakewriter_tasks[i]);
39 }
40 fakewriter_tasks[i] = NULL;
41 }
42 kfree(fakewriter_tasks);
43 fakewriter_tasks = NULL;
44 }
45
46 if (stats_task != NULL) {
47 VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task");
48 kthread_stop(stats_task);
49 }
50 stats_task = NULL;
51
52 /* Wait for all RCU callbacks to fire. */
53 rcu_barrier();
54
55 rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
56
57 if (cur_ops->cleanup != NULL)
58 cur_ops->cleanup();
59 if (atomic_read(&n_rcu_torture_error))
60 rcu_torture_print_module_parms("End of test: FAILURE");
61 else
62 rcu_torture_print_module_parms("End of test: SUCCESS");
63 }
Line 6 sets a global variable that prevents any RCU callbacks from
re-posting themselves. This will not be necessary in most cases, since
RCU callbacks rarely include calls to call_rcu(). However, the rcutorture
module is an exception to this rule, and therefore needs to set this
global variable.
Lines 7-50 stop all the kernel tasks associated with the rcutorture
module. Therefore, once execution reaches line 53, no more rcutorture
RCU callbacks will be posted. The rcu_barrier() call on line 53 waits
for any pre-existing callbacks to complete.
Then lines 55-62 print status and do operation-specific cleanup, and
then return, permitting the module-unload operation to be completed.
Quick Quiz #2: Is there any other situation where rcu_barrier() might
be required?
Your module might have additional complications. For example, if your
module invokes call_rcu() from timers, you will need to first cancel all
the timers, and only then invoke rcu_barrier() to wait for any remaining
RCU callbacks to complete.
Implementing rcu_barrier()
Dipankar Sarma's implementation of rcu_barrier() makes use of the fact
that RCU callbacks are never reordered once queued on one of the per-CPU
queues. His implementation queues an RCU callback on each of the per-CPU
callback queues, and then waits until they have all started executing, at
which point, all earlier RCU callbacks are guaranteed to have completed.
The original code for rcu_barrier() was as follows:
1 void rcu_barrier(void)
2 {
3 BUG_ON(in_interrupt());
4 /* Take cpucontrol mutex to protect against CPU hotplug */
5 mutex_lock(&rcu_barrier_mutex);
6 init_completion(&rcu_barrier_completion);
7 atomic_set(&rcu_barrier_cpu_count, 0);
8 on_each_cpu(rcu_barrier_func, NULL, 0, 1);
9 wait_for_completion(&rcu_barrier_completion);
10 mutex_unlock(&rcu_barrier_mutex);
11 }
Line 3 verifies that the caller is in process context, and lines 5 and 10
use rcu_barrier_mutex to ensure that only one rcu_barrier() is using the
global completion and counters at a time, which are initialized on lines
6 and 7. Line 8 causes each CPU to invoke rcu_barrier_func(), which is
shown below. Note that the final "1" in on_each_cpu()'s argument list
ensures that all the calls to rcu_barrier_func() will have completed
before on_each_cpu() returns. Line 9 then waits for the completion.
This code was rewritten in 2008 to support rcu_barrier_bh() and
rcu_barrier_sched() in addition to the original rcu_barrier().
The rcu_barrier_func() runs on each CPU, where it invokes call_rcu()
to post an RCU callback, as follows:
1 static void rcu_barrier_func(void *notused)
2 {
3 int cpu = smp_processor_id();
4 struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
5 struct rcu_head *head;
6
7 head = &rdp->barrier;
8 atomic_inc(&rcu_barrier_cpu_count);
9 call_rcu(head, rcu_barrier_callback);
10 }
Lines 3 and 4 locate RCU's internal per-CPU rcu_data structure,
which contains the struct rcu_head that needed for the later call to
call_rcu(). Line 7 picks up a pointer to this struct rcu_head, and line
8 increments a global counter. This counter will later be decremented
by the callback. Line 9 then registers the rcu_barrier_callback() on
the current CPU's queue.
The rcu_barrier_callback() function simply atomically decrements the
rcu_barrier_cpu_count variable and finalizes the completion when it
reaches zero, as follows:
1 static void rcu_barrier_callback(struct rcu_head *notused)
2 {
3 if (atomic_dec_and_test(&rcu_barrier_cpu_count))
4 complete(&rcu_barrier_completion);
5 }
Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
immediately (thus incrementing rcu_barrier_cpu_count to the
value one), but the other CPU's rcu_barrier_func() invocations
are delayed for a full grace period? Couldn't this result in
rcu_barrier() returning prematurely?
rcu_barrier() Summary
The rcu_barrier() primitive has seen relatively little use, since most
code using RCU is in the core kernel rather than in modules. However, if
you are using RCU from an unloadable module, you need to use rcu_barrier()
so that your module may be safely unloaded.
Answers to Quick Quizzes
Quick Quiz #1: Why is there no srcu_barrier()?
Answer: Since there is no call_srcu(), there can be no outstanding SRCU
callbacks. Therefore, there is no need to wait for them.
Quick Quiz #2: Is there any other situation where rcu_barrier() might
be required?
Answer: Interestingly enough, rcu_barrier() was not originally
implemented for module unloading. Nikita Danilov was using
RCU in a filesystem, which resulted in a similar situation at
filesystem-unmount time. Dipankar Sarma coded up rcu_barrier()
in response, so that Nikita could invoke it during the
filesystem-unmount process.
Much later, yours truly hit the RCU module-unload problem when
implementing rcutorture, and found that rcu_barrier() solves
this problem as well.
Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
immediately (thus incrementing rcu_barrier_cpu_count to the
value one), but the other CPU's rcu_barrier_func() invocations
are delayed for a full grace period? Couldn't this result in
rcu_barrier() returning prematurely?
Answer: This cannot happen. The reason is that on_each_cpu() has its last
argument, the wait flag, set to "1". This flag is passed through
to smp_call_function() and further to smp_call_function_on_cpu(),
causing this latter to spin until the cross-CPU invocation of
rcu_barrier_func() has completed. This by itself would prevent
a grace period from completing on non-CONFIG_PREEMPT kernels,
since each CPU must undergo a context switch (or other quiescent
state) before the grace period can complete. However, this is
of no use in CONFIG_PREEMPT kernels.
Therefore, on_each_cpu() disables preemption across its call
to smp_call_function() and also across the local call to
rcu_barrier_func(). This prevents the local CPU from context
switching, again preventing grace periods from completing. This
means that all CPUs have executed rcu_barrier_func() before
the first rcu_barrier_callback() can possibly execute, in turn
preventing rcu_barrier_cpu_count from prematurely reaching zero.
Currently, -rt implementations of RCU keep but a single global
queue for RCU callbacks, and thus do not suffer from this
problem. However, when the -rt RCU eventually does have per-CPU
callback queues, things will have to change. One simple change
is to add an rcu_read_lock() before line 8 of rcu_barrier()
and an rcu_read_unlock() after line 8 of this same function. If
you can think of a better change, please let me know!

45
Documentation/bad_memory.txt Normal file
View File

@ -0,0 +1,45 @@
March 2008
Jan-Simon Moeller, dl9pf@gmx.de
How to deal with bad memory e.g. reported by memtest86+ ?
#########################################################
There are three possibilities I know of:
1) Reinsert/swap the memory modules
2) Buy new modules (best!) or try to exchange the memory
if you have spare-parts
3) Use BadRAM or memmap
This Howto is about number 3) .
BadRAM
######
BadRAM is the actively developed and available as kernel-patch
here: http://rick.vanrein.org/linux/badram/
For more details see the BadRAM documentation.
memmap
######
memmap is already in the kernel and usable as kernel-parameter at
boot-time. Its syntax is slightly strange and you may need to
calculate the values by yourself!
Syntax to exclude a memory area (see kernel-parameters.txt for details):
memmap=<size>$<address>
Example: memtest86+ reported here errors at address 0x18691458, 0x18698424 and
some others. All had 0x1869xxxx in common, so I chose a pattern of
0x18690000,0xffff0000.
With the numbers of the example above:
memmap=64K$0x18690000
or
memmap=0x10000$0x18690000

9
Documentation/cgroups/cgroups.txt
View File

@ -227,7 +227,6 @@ Each cgroup is represented by a directory in the cgroup file system
containing the following files describing that cgroup:
- tasks: list of tasks (by pid) attached to that cgroup
- releasable flag: cgroup currently removeable?
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
@ -360,7 +359,7 @@ Now you want to do something with this cgroup.
In this directory you can find several files:
# ls
notify_on_release releasable tasks
notify_on_release tasks
(plus whatever files added by the attached subsystems)
Now attach your shell to this cgroup:
@ -479,7 +478,6 @@ newly-created cgroup if an error occurs after this subsystem's
create() method has been called for the new cgroup).
void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp);
(cgroup_mutex held by caller)
Called before checking the reference count on each subsystem. This may
be useful for subsystems which have some extra references even if
@ -498,6 +496,7 @@ remain valid while the caller holds cgroup_mutex.
void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cgrp, struct task_struct *task)
(cgroup_mutex held by caller)
Called after the task has been attached to the cgroup, to allow any
post-attachment activity that requires memory allocations or blocking.
@ -511,6 +510,7 @@ void exit(struct cgroup_subsys *ss, struct task_struct *task)
Called during task exit.
int populate(struct cgroup_subsys *ss, struct cgroup *cgrp)
(cgroup_mutex held by caller)
Called after creation of a cgroup to allow a subsystem to populate
the cgroup directory with file entries. The subsystem should make
@ -520,6 +520,7 @@ method can return an error code, the error code is currently not
always handled well.
void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp)
(cgroup_mutex held by caller)
Called at the end of cgroup_clone() to do any paramater
initialization which might be required before a task could attach. For
@ -527,7 +528,7 @@ example in cpusets, no task may attach before 'cpus' and 'mems' are set
up.
void bind(struct cgroup_subsys *ss, struct cgroup *root)
(cgroup_mutex held by caller)
(cgroup_mutex and ss->hierarchy_mutex held by caller)
Called when a cgroup subsystem is rebound to a different hierarchy
and root cgroup. Currently this will only involve movement between

342
Documentation/controllers/memcg_test.txt Normal file
View File

@ -0,0 +1,342 @@
Memory Resource Controller(Memcg) Implementation Memo.
Last Updated: 2008/12/15
Base Kernel Version: based on 2.6.28-rc8-mm.
Because VM is getting complex (one of reasons is memcg...), memcg's behavior
is complex. This is a document for memcg's internal behavior.
Please note that implementation details can be changed.
(*) Topics on API should be in Documentation/controllers/memory.txt)
0. How to record usage ?
2 objects are used.
page_cgroup ....an object per page.
Allocated at boot or memory hotplug. Freed at memory hot removal.
swap_cgroup ... an entry per swp_entry.
Allocated at swapon(). Freed at swapoff().
The page_cgroup has USED bit and double count against a page_cgroup never
occurs. swap_cgroup is used only when a charged page is swapped-out.
1. Charge
a page/swp_entry may be charged (usage += PAGE_SIZE) at
mem_cgroup_newpage_charge()
Called at new page fault and Copy-On-Write.
mem_cgroup_try_charge_swapin()
Called at do_swap_page() (page fault on swap entry) and swapoff.
Followed by charge-commit-cancel protocol. (With swap accounting)
At commit, a charge recorded in swap_cgroup is removed.
mem_cgroup_cache_charge()
Called at add_to_page_cache()
mem_cgroup_cache_charge_swapin()
Called at shmem's swapin.
mem_cgroup_prepare_migration()
Called before migration. "extra" charge is done and followed by
charge-commit-cancel protocol.
At commit, charge against oldpage or newpage will be committed.
2. Uncharge
a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by
mem_cgroup_uncharge_page()
Called when an anonymous page is fully unmapped. I.e., mapcount goes
to 0. If the page is SwapCache, uncharge is delayed until
mem_cgroup_uncharge_swapcache().
mem_cgroup_uncharge_cache_page()
Called when a page-cache is deleted from radix-tree. If the page is
SwapCache, uncharge is delayed until mem_cgroup_uncharge_swapcache().
mem_cgroup_uncharge_swapcache()
Called when SwapCache is removed from radix-tree. The charge itself
is moved to swap_cgroup. (If mem+swap controller is disabled, no
charge to swap occurs.)
mem_cgroup_uncharge_swap()
Called when swp_entry's refcnt goes down to 0. A charge against swap
disappears.
mem_cgroup_end_migration(old, new)
At success of migration old is uncharged (if necessary), a charge
to new page is committed. At failure, charge to old page is committed.
3. charge-commit-cancel
In some case, we can't know this "charge" is valid or not at charging
(because of races).
To handle such case, there are charge-commit-cancel functions.
mem_cgroup_try_charge_XXX
mem_cgroup_commit_charge_XXX
mem_cgroup_cancel_charge_XXX
these are used in swap-in and migration.
At try_charge(), there are no flags to say "this page is charged".
at this point, usage += PAGE_SIZE.
At commit(), the function checks the page should be charged or not
and set flags or avoid charging.(usage -= PAGE_SIZE)
At cancel(), simply usage -= PAGE_SIZE.
Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
4. Anonymous
Anonymous page is newly allocated at
- page fault into MAP_ANONYMOUS mapping.
- Copy-On-Write.
It is charged right after it's allocated before doing any page table
related operations. Of course, it's uncharged when another page is used
for the fault address.
At freeing anonymous page (by exit() or munmap()), zap_pte() is called
and pages for ptes are freed one by one.(see mm/memory.c). Uncharges
are done at page_remove_rmap() when page_mapcount() goes down to 0.
Another page freeing is by page-reclaim (vmscan.c) and anonymous
pages are swapped out. In this case, the page is marked as
PageSwapCache(). uncharge() routine doesn't uncharge the page marked
as SwapCache(). It's delayed until __delete_from_swap_cache().
4.1 Swap-in.
At swap-in, the page is taken from swap-cache. There are 2 cases.
(a) If the SwapCache is newly allocated and read, it has no charges.
(b) If the SwapCache has been mapped by processes, it has been
charged already.
This swap-in is one of the most complicated work. In do_swap_page(),
following events occur when pte is unchanged.
(1) the page (SwapCache) is looked up.
(2) lock_page()
(3) try_charge_swapin()
(4) reuse_swap_page() (may call delete_swap_cache())
(5) commit_charge_swapin()
(6) swap_free().
Considering following situation for example.
(A) The page has not been charged before (2) and reuse_swap_page()
doesn't call delete_from_swap_cache().
(B) The page has not been charged before (2) and reuse_swap_page()
calls delete_from_swap_cache().
(C) The page has been charged before (2) and reuse_swap_page() doesn't
call delete_from_swap_cache().
(D) The page has been charged before (2) and reuse_swap_page() calls
delete_from_swap_cache().
memory.usage/memsw.usage changes to this page/swp_entry will be
Case (A) (B) (C) (D)
Event
Before (2) 0/ 1 0/ 1 1/ 1 1/ 1
===========================================
(3) +1/+1 +1/+1 +1/+1 +1/+1
(4) - 0/ 0 - -1/ 0
(5) 0/-1 0/ 0 -1/-1 0/ 0
(6) - 0/-1 - 0/-1
===========================================
Result 1/ 1 1/ 1 1/ 1 1/ 1
In any cases, charges to this page should be 1/ 1.
4.2 Swap-out.
At swap-out, typical state transition is below.
(a) add to swap cache. (marked as SwapCache)
swp_entry's refcnt += 1.
(b) fully unmapped.
swp_entry's refcnt += # of ptes.
(c) write back to swap.
(d) delete from swap cache. (remove from SwapCache)
swp_entry's refcnt -= 1.
At (b), the page is marked as SwapCache and not uncharged.
At (d), the page is removed from SwapCache and a charge in page_cgroup
is moved to swap_cgroup.
Finally, at task exit,
(e) zap_pte() is called and swp_entry's refcnt -=1 -> 0.
Here, a charge in swap_cgroup disappears.
5. Page Cache
Page Cache is charged at
- add_to_page_cache_locked().
uncharged at
- __remove_from_page_cache().
The logic is very clear. (About migration, see below)
Note: __remove_from_page_cache() is called by remove_from_page_cache()
and __remove_mapping().
6. Shmem(tmpfs) Page Cache
Memcg's charge/uncharge have special handlers of shmem. The best way
to understand shmem's page state transition is to read mm/shmem.c.
But brief explanation of the behavior of memcg around shmem will be
helpful to understand the logic.
Shmem's page (just leaf page, not direct/indirect block) can be on
- radix-tree of shmem's inode.
- SwapCache.
- Both on radix-tree and SwapCache. This happens at swap-in
and swap-out,
It's charged when...
- A new page is added to shmem's radix-tree.
- A swp page is read. (move a charge from swap_cgroup to page_cgroup)
It's uncharged when
- A page is removed from radix-tree and not SwapCache.
- When SwapCache is removed, a charge is moved to swap_cgroup.
- When swp_entry's refcnt goes down to 0, a charge in swap_cgroup
disappears.
7. Page Migration
One of the most complicated functions is page-migration-handler.
Memcg has 2 routines. Assume that we are migrating a page's contents
from OLDPAGE to NEWPAGE.
Usual migration logic is..
(a) remove the page from LRU.
(b) allocate NEWPAGE (migration target)
(c) lock by lock_page().
(d) unmap all mappings.
(e-1) If necessary, replace entry in radix-tree.
(e-2) move contents of a page.
(f) map all mappings again.
(g) pushback the page to LRU.
(-) OLDPAGE will be freed.
Before (g), memcg should complete all necessary charge/uncharge to
NEWPAGE/OLDPAGE.
The point is....
- If OLDPAGE is anonymous, all charges will be dropped at (d) because
try_to_unmap() drops all mapcount and the page will not be
SwapCache.
- If OLDPAGE is SwapCache, charges will be kept at (g) because
__delete_from_swap_cache() isn't called at (e-1)
- If OLDPAGE is page-cache, charges will be kept at (g) because
remove_from_swap_cache() isn't called at (e-1)
memcg provides following hooks.
- mem_cgroup_prepare_migration(OLDPAGE)
Called after (b) to account a charge (usage += PAGE_SIZE) against
memcg which OLDPAGE belongs to.
- mem_cgroup_end_migration(OLDPAGE, NEWPAGE)
Called after (f) before (g).
If OLDPAGE is used, commit OLDPAGE again. If OLDPAGE is already
charged, a charge by prepare_migration() is automatically canceled.
If NEWPAGE is used, commit NEWPAGE and uncharge OLDPAGE.
But zap_pte() (by exit or munmap) can be called while migration,
we have to check if OLDPAGE/NEWPAGE is a valid page after commit().
8. LRU
Each memcg has its own private LRU. Now, it's handling is under global
VM's control (means that it's handled under global zone->lru_lock).
Almost all routines around memcg's LRU is called by global LRU's
list management functions under zone->lru_lock().
A special function is mem_cgroup_isolate_pages(). This scans
memcg's private LRU and call __isolate_lru_page() to extract a page
from LRU.
(By __isolate_lru_page(), the page is removed from both of global and
private LRU.)
9. Typical Tests.
Tests for racy cases.
9.1 Small limit to memcg.
When you do test to do racy case, it's good test to set memcg's limit
to be very small rather than GB. Many races found in the test under
xKB or xxMB limits.
(Memory behavior under GB and Memory behavior under MB shows very
different situation.)
9.2 Shmem
Historically, memcg's shmem handling was poor and we saw some amount
of troubles here. This is because shmem is page-cache but can be
SwapCache. Test with shmem/tmpfs is always good test.
9.3 Migration
For NUMA, migration is an another special case. To do easy test, cpuset
is useful. Following is a sample script to do migration.
mount -t cgroup -o cpuset none /opt/cpuset
mkdir /opt/cpuset/01
echo 1 > /opt/cpuset/01/cpuset.cpus
echo 0 > /opt/cpuset/01/cpuset.mems
echo 1 > /opt/cpuset/01/cpuset.memory_migrate
mkdir /opt/cpuset/02
echo 1 > /opt/cpuset/02/cpuset.cpus
echo 1 > /opt/cpuset/02/cpuset.mems
echo 1 > /opt/cpuset/02/cpuset.memory_migrate
In above set, when you moves a task from 01 to 02, page migration to
node 0 to node 1 will occur. Following is a script to migrate all
under cpuset.
--
move_task()
{
for pid in $1
do
/bin/echo $pid >$2/tasks 2>/dev/null
echo -n $pid
echo -n " "
done
echo END
}
G1_TASK=`cat ${G1}/tasks`
G2_TASK=`cat ${G2}/tasks`
move_task "${G1_TASK}" ${G2} &
--
9.4 Memory hotplug.
memory hotplug test is one of good test.
to offline memory, do following.
# echo offline > /sys/devices/system/memory/memoryXXX/state
(XXX is the place of memory)
This is an easy way to test page migration, too.
9.5 mkdir/rmdir
When using hierarchy, mkdir/rmdir test should be done.
Use tests like the following.
echo 1 >/opt/cgroup/01/memory/use_hierarchy
mkdir /opt/cgroup/01/child_a
mkdir /opt/cgroup/01/child_b
set limit to 01.
add limit to 01/child_b
run jobs under child_a and child_b
create/delete following groups at random while jobs are running.
/opt/cgroup/01/child_a/child_aa
/opt/cgroup/01/child_b/child_bb
/opt/cgroup/01/child_c
running new jobs in new group is also good.
9.6 Mount with other subsystems.
Mounting with other subsystems is a good test because there is a
race and lock dependency with other cgroup subsystems.
example)
# mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
and do task move, mkdir, rmdir etc...under this.

135
Documentation/controllers/memory.txt
View File

@ -137,7 +137,32 @@ behind this approach is that a cgroup that aggressively uses a shared
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
2.4 Reclaim
Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP)
Swap Extension allows you to record charge for swap. A swapped-in page is
charged back to original page allocator if possible.
When swap is accounted, following files are added.
- memory.memsw.usage_in_bytes.
- memory.memsw.limit_in_bytes.
usage of mem+swap is limited by memsw.limit_in_bytes.
Note: why 'mem+swap' rather than swap.
The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
to move account from memory to swap...there is no change in usage of
mem+swap.
In other words, when we want to limit the usage of swap without affecting
global LRU, mem+swap limit is better than just limiting swap from OS point
of view.
2.5 Reclaim
Each cgroup maintains a per cgroup LRU that consists of an active
and inactive list. When a cgroup goes over its limit, we first try
@ -207,12 +232,6 @@ exceeded.
The memory.stat file gives accounting information. Now, the number of
caches, RSS and Active pages/Inactive pages are shown.
The memory.force_empty gives an interface to drop *all* charges by force.
# echo 1 > memory.force_empty
will drop all charges in cgroup. Currently, this is maintained for test.
4. Testing
Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11].
@ -242,10 +261,106 @@ reclaimed.
A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
cgroup might have some charge associated with it, even though all
tasks have migrated away from it. Such charges are automatically dropped at
rmdir() if there are no tasks.
tasks have migrated away from it.
Such charges are freed(at default) or moved to its parent. When moved,
both of RSS and CACHES are moved to parent.
If both of them are busy, rmdir() returns -EBUSY. See 5.1 Also.
5. TODO
Charges recorded in swap information is not updated at removal of cgroup.
Recorded information is discarded and a cgroup which uses swap (swapcache)
will be charged as a new owner of it.
5. Misc. interfaces.
5.1 force_empty
memory.force_empty interface is provided to make cgroup's memory usage empty.
You can use this interface only when the cgroup has no tasks.
When writing anything to this
# echo 0 > memory.force_empty
Almost all pages tracked by this memcg will be unmapped and freed. Some of
pages cannot be freed because it's locked or in-use. Such pages are moved
to parent and this cgroup will be empty. But this may return -EBUSY in
some too busy case.
Typical use case of this interface is that calling this before rmdir().
Because rmdir() moves all pages to parent, some out-of-use page caches can be
moved to the parent. If you want to avoid that, force_empty will be useful.
5.2 stat file
memory.stat file includes following statistics (now)
cache - # of pages from page-cache and shmem.
rss - # of pages from anonymous memory.
pgpgin - # of event of charging
pgpgout - # of event of uncharging
active_anon - # of pages on active lru of anon, shmem.
inactive_anon - # of pages on active lru of anon, shmem
active_file - # of pages on active lru of file-cache
inactive_file - # of pages on inactive lru of file cache
unevictable - # of pages cannot be reclaimed.(mlocked etc)
Below is depend on CONFIG_DEBUG_VM.
inactive_ratio - VM inernal parameter. (see mm/page_alloc.c)
recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
Memo:
recent_rotated means recent frequency of lru rotation.
recent_scanned means recent # of scans to lru.
showing for better debug please see the code for meanings.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
Following cgroup's swapiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.
The hierarchy is created by creating the appropriate cgroups in the
cgroup filesystem. Consider for example, the following cgroup filesystem
hierarchy
root
/ | \
/ | \
a b c
| \
| \
d e
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
that has memory.use_hierarchy enabled. If one of the ancestors goes over its
limit, the reclaim algorithm reclaims from the tasks in the ancestor and the
children of the ancestor.
6.1 Enabling hierarchical accounting and reclaim
The memory controller by default disables the hierarchy feature. Support
can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup
# echo 1 > memory.use_hierarchy
The feature can be disabled by
# echo 0 > memory.use_hierarchy
NOTE1: Enabling/disabling will fail if the cgroup already has other
cgroups created below it.
NOTE2: This feature can be enabled/disabled per subtree.
7. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first

86
Documentation/crypto/async-tx-api.txt
View File

@ -13,9 +13,9 @@
3.6 Constraints
3.7 Example
4 DRIVER DEVELOPER NOTES
4 DMAENGINE DRIVER DEVELOPER NOTES
4.1 Conformance points
4.2 "My application needs finer control of hardware channels"
4.2 "My application needs exclusive control of hardware channels"
5 SOURCE
@ -150,6 +150,7 @@ ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more
implementation examples.
4 DRIVER DEVELOPMENT NOTES
4.1 Conformance points:
There are a few conformance points required in dmaengine drivers to
accommodate assumptions made by applications using the async_tx API:
@ -158,58 +159,49 @@ accommodate assumptions made by applications using the async_tx API:
3/ Use async_tx_run_dependencies() in the descriptor clean up path to
handle submission of dependent operations
4.2 "My application needs finer control of hardware channels"
This requirement seems to arise from cases where a DMA engine driver is
trying to support device-to-memory DMA. The dmaengine and async_tx
implementations were designed for offloading memory-to-memory
operations; however, there are some capabilities of the dmaengine layer
that can be used for platform-specific channel management.
Platform-specific constraints can be handled by registering the
application as a 'dma_client' and implementing a 'dma_event_callback' to
apply a filter to the available channels in the system. Before showing
how to implement a custom dma_event callback some background of
dmaengine's client support is required.
4.2 "My application needs exclusive control of hardware channels"
Primarily this requirement arises from cases where a DMA engine driver
is being used to support device-to-memory operations. A channel that is
performing these operations cannot, for many platform specific reasons,
be shared. For these cases the dma_request_channel() interface is
provided.
The following routines in dmaengine support multiple clients requesting
use of a channel:
- dma_async_client_register(struct dma_client *client)
- dma_async_client_chan_request(struct dma_client *client)
The interface is:
struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
dma_filter_fn filter_fn,
void *filter_param);
dma_async_client_register takes a pointer to an initialized dma_client
structure. It expects that the 'event_callback' and 'cap_mask' fields
are already initialized.
Where dma_filter_fn is defined as:
typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
dma_async_client_chan_request triggers dmaengine to notify the client of
all channels that satisfy the capability mask. It is up to the client's
event_callback routine to track how many channels the client needs and
how many it is currently using. The dma_event_callback routine returns a
dma_state_client code to let dmaengine know the status of the
allocation.
When the optional 'filter_fn' parameter is set to NULL
dma_request_channel simply returns the first channel that satisfies the
capability mask. Otherwise, when the mask parameter is insufficient for
specifying the necessary channel, the filter_fn routine can be used to
disposition the available channels in the system. The filter_fn routine
is called once for each free channel in the system. Upon seeing a
suitable channel filter_fn returns DMA_ACK which flags that channel to
be the return value from dma_request_channel. A channel allocated via
this interface is exclusive to the caller, until dma_release_channel()
is called.
Below is the example of how to extend this functionality for
platform-specific filtering of the available channels beyond the
standard capability mask:
The DMA_PRIVATE capability flag is used to tag dma devices that should
not be used by the general-purpose allocator. It can be set at
initialization time if it is known that a channel will always be
private. Alternatively, it is set when dma_request_channel() finds an
unused "public" channel.
static enum dma_state_client
my_dma_client_callback(struct dma_client *client,
struct dma_chan *chan, enum dma_state state)
{
struct dma_device *dma_dev;
struct my_platform_specific_dma *plat_dma_dev;
dma_dev = chan->device;
plat_dma_dev = container_of(dma_dev,
struct my_platform_specific_dma,
dma_dev);
if (!plat_dma_dev->platform_specific_capability)
return DMA_DUP;
. . .
}
A couple caveats to note when implementing a driver and consumer:
1/ Once a channel has been privately allocated it will no longer be
considered by the general-purpose allocator even after a call to
dma_release_channel().
2/ Since capabilities are specified at the device level a dma_device
with multiple channels will either have all channels public, or all
channels private.
5 SOURCE
include/linux/dmaengine.h: core header file for DMA drivers and clients
include/linux/dmaengine.h: core header file for DMA drivers and api users
drivers/dma/dmaengine.c: offload engine channel management routines
drivers/dma/: location for offload engine drivers
include/linux/async_tx.h: core header file for the async_tx api

6
Documentation/development-process/4.Coding
View File

@ -375,10 +375,10 @@ say, this can be a large job, so it is best to be sure that the
justification is solid.
When making an incompatible API change, one should, whenever possible,
ensure that code which has not been updated is caught by the compiler.
ensure that code which has not been updated is caught by the compiler.
This will help you to be sure that you have found all in-tree uses of that
interface. It will also alert developers of out-of-tree code that there is
a change that they need to respond to. Supporting out-of-tree code is not
something that kernel developers need to be worried about, but we also do
not have to make life harder for out-of-tree developers than it it needs to
be.
not have to make life harder for out-of-tree developers than it needs to
be.

1
Documentation/dmaengine.txt Normal file
View File

@ -0,0 +1 @@
See Documentation/crypto/async-tx-api.txt

8
Documentation/filesystems/Locking
View File

@ -97,8 +97,8 @@ prototypes:
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
void (*write_super_lockfs) (struct super_block *);
void (*unlockfs) (struct super_block *);
int (*freeze_fs) (struct super_block *);
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
void (*clear_inode) (struct inode *);
@ -119,8 +119,8 @@ delete_inode: no
put_super: yes yes no
write_super: no yes read
sync_fs: no no read
write_super_lockfs: ?
unlockfs: ?
freeze_fs: ?
unfreeze_fs: ?
statfs: no no no
remount_fs: yes yes maybe (see below)
clear_inode: no

91
Documentation/filesystems/btrfs.txt Normal file
View File

@ -0,0 +1,91 @@
BTRFS
=====
Btrfs is a new copy on write filesystem for Linux aimed at
implementing advanced features while focusing on fault tolerance,
repair and easy administration. Initially developed by Oracle, Btrfs
is licensed under the GPL and open for contribution from anyone.
Linux has a wealth of filesystems to choose from, but we are facing a
number of challenges with scaling to the large storage subsystems that
are becoming common in today's data centers. Filesystems need to scale
in their ability to address and manage large storage, and also in
their ability to detect, repair and tolerate errors in the data stored
on disk. Btrfs is under heavy development, and is not suitable for
any uses other than benchmarking and review. The Btrfs disk format is
not yet finalized.
The main Btrfs features include:
* Extent based file storage (2^64 max file size)
* Space efficient packing of small files
* Space efficient indexed directories
* Dynamic inode allocation
* Writable snapshots
* Subvolumes (separate internal filesystem roots)
* Object level mirroring and striping
* Checksums on data and metadata (multiple algorithms available)
* Compression
* Integrated multiple device support, with several raid algorithms
* Online filesystem check (not yet implemented)
* Very fast offline filesystem check
* Efficient incremental backup and FS mirroring (not yet implemented)
* Online filesystem defragmentation
MAILING LIST
============
There is a Btrfs mailing list hosted on vger.kernel.org. You can
find details on how to subscribe here:
http://vger.kernel.org/vger-lists.html#linux-btrfs
Mailing list archives are available from gmane:
http://dir.gmane.org/gmane.comp.file-systems.btrfs
IRC
===
Discussion of Btrfs also occurs on the #btrfs channel of the Freenode
IRC network.
UTILITIES
=========
Userspace tools for creating and manipulating Btrfs file systems are
available from the git repository at the following location:
http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
These include the following tools:
mkfs.btrfs: create a filesystem
btrfsctl: control program to create snapshots and subvolumes:
mount /dev/sda2 /mnt
btrfsctl -s new_subvol_name /mnt
btrfsctl -s snapshot_of_default /mnt/default
btrfsctl -s snapshot_of_new_subvol /mnt/new_subvol_name
btrfsctl -s snapshot_of_a_snapshot /mnt/snapshot_of_new_subvol
ls /mnt
default snapshot_of_a_snapshot snapshot_of_new_subvol
new_subvol_name snapshot_of_default
Snapshots and subvolumes cannot be deleted right now, but you can
rm -rf all the files and directories inside them.
btrfsck: do a limited check of the FS extent trees.
btrfs-debug-tree: print all of the FS metadata in text form. Example:
btrfs-debug-tree /dev/sda2 >& big_output_file

85
Documentation/filesystems/ext4.txt
View File

@ -58,13 +58,22 @@ Note: More extensive information for getting started with ext4 can be
# mount -t ext4 /dev/hda1 /wherever
- When comparing performance with other filesystems, remember that
ext3/4 by default offers higher data integrity guarantees than most.
So when comparing with a metadata-only journalling filesystem, such
as ext3, use `mount -o data=writeback'. And you might as well use
`mount -o nobh' too along with it. Making the journal larger than
the mke2fs default often helps performance with metadata-intensive
workloads.
- When comparing performance with other filesystems, it's always
important to try multiple workloads; very often a subtle change in a
workload parameter can completely change the ranking of which
filesystems do well compared to others. When comparing versus ext3,
note that ext4 enables write barriers by default, while ext3 does
not enable write barriers by default. So it is useful to use
explicitly specify whether barriers are enabled or not when via the
'-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems
for a fair comparison. When tuning ext3 for best benchmark numbers,
it is often worthwhile to try changing the data journaling mode; '-o
data=writeback,nobh' can be faster for some workloads. (Note
however that running mounted with data=writeback can potentially
leave stale data exposed in recently written files in case of an
unclean shutdown, which could be a security exposure in some
situations.) Configuring the filesystem with a large journal can
also be helpful for metadata-intensive workloads.
2. Features
===========
@ -74,7 +83,7 @@ Note: More extensive information for getting started with ext4 can be
* ability to use filesystems > 16TB (e2fsprogs support not available yet)
* extent format reduces metadata overhead (RAM, IO for access, transactions)
* extent format more robust in face of on-disk corruption due to magics,
* internal redunancy in tree
* internal redundancy in tree
* improved file allocation (multi-block alloc)
* fix 32000 subdirectory limit
* nsec timestamps for mtime, atime, ctime, create time
@ -116,10 +125,11 @@ grouping of bitmaps and inode tables. Some test results available here:
When mounting an ext4 filesystem, the following option are accepted:
(*) == default
extents (*) ext4 will use extents to address file data. The
file system will no longer be mountable by ext3.
noextents ext4 will not use extents for newly created files
ro Mount filesystem read only. Note that ext4 will
replay the journal (and thus write to the
partition) even when mounted "read only". The
mount options "ro,noload" can be used to prevent
writes to the filesystem.
journal_checksum Enable checksumming of the journal transactions.
This will allow the recovery code in e2fsck and the
@ -134,17 +144,17 @@ journal_async_commit Commit block can be written to disk without waiting
journal=update Update the ext4 file system's journal to the current
format.
journal=inum When a journal already exists, this option is ignored.
Otherwise, it specifies the number of the inode which
will represent the ext4 file system's journal file.
journal_dev=devnum When the external journal device's major/minor numbers
have changed, this option allows the user to specify
the new journal location. The journal device is
identified through its new major/minor numbers encoded
in devnum.
noload Don't load the journal on mounting.
noload Don't load the journal on mounting. Note that
if the filesystem was not unmounted cleanly,
skipping the journal replay will lead to the
filesystem containing inconsistencies that can
lead to any number of problems.
data=journal All data are committed into the journal prior to being
written into the main file system.
@ -219,9 +229,12 @@ minixdf Make 'df' act like Minix.
debug Extra debugging information is sent to syslog.
errors=remount-ro(*) Remount the filesystem read-only on an error.
errors=remount-ro Remount the filesystem read-only on an error.
errors=continue Keep going on a filesystem error.
errors=panic Panic and halt the machine if an error occurs.
(These mount options override the errors behavior
specified in the superblock, which can be configured
using tune2fs)
data_err=ignore(*) Just print an error message if an error occurs
in a file data buffer in ordered mode.
@ -261,6 +274,42 @@ delalloc (*) Deferring block allocation until write-out time.
nodelalloc Disable delayed allocation. Blocks are allocation
when data is copied from user to page cache.
max_batch_time=usec Maximum amount of time ext4 should wait for
additional filesystem operations to be batch
together with a synchronous write operation.
Since a synchronous write operation is going to
force a commit and then a wait for the I/O
complete, it doesn't cost much, and can be a
huge throughput win, we wait for a small amount
of time to see if any other transactions can
piggyback on the synchronous write. The
algorithm used is designed to automatically tune
for the speed of the disk, by measuring the
amount of time (on average) that it takes to
finish committing a transaction. Call this time
the "commit time". If the time that the
transactoin has been running is less than the
commit time, ext4 will try sleeping for the
commit time to see if other operations will join
the transaction. The commit time is capped by
the max_batch_time, which defaults to 15000us
(15ms). This optimization can be turned off
entirely by setting max_batch_time to 0.
min_batch_time=usec This parameter sets the commit time (as
described above) to be at least min_batch_time.
It defaults to zero microseconds. Increasing
this parameter may improve the throughput of
multi-threaded, synchronous workloads on very
fast disks, at the cost of increasing latency.
journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the
highest priorty) which should be used for I/O
operations submitted by kjournald2 during a
commit operation. This defaults to 3, which is
a slightly higher priority than the default I/O
priority.
Data Mode
=========
There are 3 different data modes:

225
Documentation/filesystems/squashfs.txt Normal file
View File

@ -0,0 +1,225 @@
SQUASHFS 4.0 FILESYSTEM
=======================
Squashfs is a compressed read-only filesystem for Linux.
It uses zlib compression to compress files, inodes and directories.
Inodes in the system are very small and all blocks are packed to minimise
data overhead. Block sizes greater than 4K are supported up to a maximum
of 1Mbytes (default block size 128K).
Squashfs is intended for general read-only filesystem use, for archival
use (i.e. in cases where a .tar.gz file may be used), and in constrained
block device/memory systems (e.g. embedded systems) where low overhead is
needed.
Mailing list: squashfs-devel@lists.sourceforge.net
Web site: www.squashfs.org
1. FILESYSTEM FEATURES
----------------------
Squashfs filesystem features versus Cramfs:
Squashfs Cramfs
Max filesystem size: 2^64 16 MiB
Max file size: ~ 2 TiB 16 MiB
Max files: unlimited unlimited
Max directories: unlimited unlimited
Max entries per directory: unlimited unlimited
Max block size: 1 MiB 4 KiB
Metadata compression: yes no
Directory indexes: yes no
Sparse file support: yes no
Tail-end packing (fragments): yes no
Exportable (NFS etc.): yes no
Hard link support: yes no
"." and ".." in readdir: yes no
Real inode numbers: yes no
32-bit uids/gids: yes no
File creation time: yes no
Xattr and ACL support: no no
Squashfs compresses data, inodes and directories. In addition, inode and
directory data are highly compacted, and packed on byte boundaries. Each
compressed inode is on average 8 bytes in length (the exact length varies on
file type, i.e. regular file, directory, symbolic link, and block/char device
inodes have different sizes).
2. USING SQUASHFS
-----------------
As squashfs is a read-only filesystem, the mksquashfs program must be used to
create populated squashfs filesystems. This and other squashfs utilities
can be obtained from http://www.squashfs.org. Usage instructions can be
obtained from this site also.
3. SQUASHFS FILESYSTEM DESIGN
-----------------------------
A squashfs filesystem consists of seven parts, packed together on a byte
alignment:
---------------
| superblock |
|---------------|
| datablocks |
| & fragments |
|---------------|
| inode table |
|---------------|
| directory |
| table |
|---------------|
| fragment |
| table |
|---------------|
| export |
| table |
|---------------|
| uid/gid |
| lookup table |
---------------
Compressed data blocks are written to the filesystem as files are read from
the source directory, and checked for duplicates. Once all file data has been
written the completed inode, directory, fragment, export and uid/gid lookup
tables are written.
3.1 Inodes
----------
Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each
compressed block is prefixed by a two byte length, the top bit is set if the
block is uncompressed. A block will be uncompressed if the -noI option is set,
or if the compressed block was larger than the uncompressed block.
Inodes are packed into the metadata blocks, and are not aligned to block
boundaries, therefore inodes overlap compressed blocks. Inodes are identified
by a 48-bit number which encodes the location of the compressed metadata block
containing the inode, and the byte offset into that block where the inode is
placed (<block, offset>).
To maximise compression there are different inodes for each file type
(regular file, directory, device, etc.), the inode contents and length
varying with the type.
To further maximise compression, two types of regular file inode and
directory inode are defined: inodes optimised for frequently occurring
regular files and directories, and extended types where extra
information has to be stored.
3.2 Directories
---------------
Like inodes, directories are packed into compressed metadata blocks, stored
in a directory table. Directories are accessed using the start address of
the metablock containing the directory and the offset into the
decompressed block (<block, offset>).
Directories are organised in a slightly complex way, and are not simply
a list of file names. The organisation takes advantage of the
fact that (in most cases) the inodes of the files will be in the same
compressed metadata block, and therefore, can share the start block.
Directories are therefore organised in a two level list, a directory
header containing the shared start block value, and a sequence of directory
entries, each of which share the shared start block. A new directory header
is written once/if the inode start block changes. The directory
header/directory entry list is repeated as many times as necessary.
Directories are sorted, and can contain a directory index to speed up
file lookup. Directory indexes store one entry per metablock, each entry
storing the index/filename mapping to the first directory header
in each metadata block. Directories are sorted in alphabetical order,
and at lookup the index is scanned linearly looking for the first filename
alphabetically larger than the filename being looked up. At this point the
location of the metadata block the filename is in has been found.
The general idea of the index is ensure only one metadata block needs to be
decompressed to do a lookup irrespective of the length of the directory.
This scheme has the advantage that it doesn't require extra memory overhead
and doesn't require much extra storage on disk.
3.3 File data
-------------
Regular files consist of a sequence of contiguous compressed blocks, and/or a
compressed fragment block (tail-end packed block). The compressed size
of each datablock is stored in a block list contained within the
file inode.
To speed up access to datablocks when reading 'large' files (256 Mbytes or
larger), the code implements an index cache that caches the mapping from
block index to datablock location on disk.
The index cache allows Squashfs to handle large files (up to 1.75 TiB) while
retaining a simple and space-efficient block list on disk. The cache
is split into slots, caching up to eight 224 GiB files (128 KiB blocks).
Larger files use multiple slots, with 1.75 TiB files using all 8 slots.
The index cache is designed to be memory efficient, and by default uses
16 KiB.
3.4 Fragment lookup table
-------------------------
Regular files can contain a fragment index which is mapped to a fragment
location on disk and compressed size using a fragment lookup table. This
fragment lookup table is itself stored compressed into metadata blocks.
A second index table is used to locate these. This second index table for
speed of access (and because it is small) is read at mount time and cached
in memory.
3.5 Uid/gid lookup table
------------------------
For space efficiency regular files store uid and gid indexes, which are
converted to 32-bit uids/gids using an id look up table. This table is
stored compressed into metadata blocks. A second index table is used to
locate these. This second index table for speed of access (and because it
is small) is read at mount time and cached in memory.
3.6 Export table
----------------
To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems
can optionally (disabled with the -no-exports Mksquashfs option) contain
an inode number to inode disk location lookup table. This is required to
enable Squashfs to map inode numbers passed in filehandles to the inode
location on disk, which is necessary when the export code reinstantiates
expired/flushed inodes.
This table is stored compressed into metadata blocks. A second index table is
used to locate these. This second index table for speed of access (and because
it is small) is read at mount time and cached in memory.
4. TODOS AND OUTSTANDING ISSUES
-------------------------------
4.1 Todo list
-------------
Implement Xattr and ACL support. The Squashfs 4.0 filesystem layout has hooks
for these but the code has not been written. Once the code has been written
the existing layout should not require modification.
4.2 Squashfs internal cache
---------------------------
Blocks in Squashfs are compressed. To avoid repeatedly decompressing
recently accessed data Squashfs uses two small metadata and fragment caches.
The cache is not used for file datablocks, these are decompressed and cached in
the page-cache in the normal way. The cache is used to temporarily cache
fragment and metadata blocks which have been read as a result of a metadata
(i.e. inode or directory) or fragment access. Because metadata and fragments
are packed together into blocks (to gain greater compression) the read of a
particular piece of metadata or fragment will retrieve other metadata/fragments
which have been packed with it, these because of locality-of-reference may be
read in the near future. Temporarily caching them ensures they are available
for near future access without requiring an additional read and decompress.
In the future this internal cache may be replaced with an implementation which
uses the kernel page cache. Because the page cache operates on page sized
units this may introduce additional complexity in terms of locking and
associated race conditions.

8
Documentation/filesystems/vfs.txt
View File

@ -210,8 +210,8 @@ struct super_operations {
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
void (*write_super_lockfs) (struct super_block *);
void (*unlockfs) (struct super_block *);
int (*freeze_fs) (struct super_block *);
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
void (*clear_inode) (struct inode *);
@ -270,11 +270,11 @@ or bottom half).
a superblock. The second parameter indicates whether the method
should wait until the write out has been completed. Optional.
write_super_lockfs: called when VFS is locking a filesystem and
freeze_fs: called when VFS is locking a filesystem and
forcing it into a consistent state. This method is currently
used by the Logical Volume Manager (LVM).
unlockfs: called when VFS is unlocking a filesystem and making it writable
unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
again.
statfs: called when the VFS needs to get filesystem statistics. This

4
Documentation/hwmon/abituguru-datasheet
View File

@ -121,7 +121,7 @@ Once all bytes have been read data will hold 0x09, but there is no reason to
test for this. Notice that the number of bytes is bank address dependent see
above and below.
After completing a successfull read it is advised to put the uGuru back in
After completing a successful read it is advised to put the uGuru back in
ready mode, so that it is ready for the next read / write cycle. This way
if your program / driver is unloaded and later loaded again the detection
algorithm described above will still work.
@ -141,7 +141,7 @@ don't ask why this is the way it is.
Once DATA holds 0x01 read CMD it should hold 0xAC now.
After completing a successfull write it is advised to put the uGuru back in
After completing a successful write it is advised to put the uGuru back in
ready mode, so that it is ready for the next read / write cycle. This way
if your program / driver is unloaded and later loaded again the detection
algorithm described above will still work.

7
Documentation/kbuild/kbuild.txt
View File

@ -124,3 +124,10 @@ KBUILD_EXTRA_SYMBOLS
--------------------------------------------------
For modules use symbols from another modules.
See more details in modules.txt.
ALLSOURCE_ARCHS
--------------------------------------------------
For tags/TAGS/cscope targets, you can specify more than one archs
to be included in the databases, separated by blankspace. e.g.
$ make ALLSOURCE_ARCHS="x86 mips arm" tags

4
Documentation/kbuild/modules.txt
View File

@ -253,7 +253,7 @@ following files:
# Module specific targets
genbin:
echo "X" > 8123_bin_shipped
echo "X" > 8123_bin.o_shipped
In example 2, we are down to two fairly simple files and for simple
@ -279,7 +279,7 @@ following files:
# Module specific targets
genbin:
echo "X" > 8123_bin_shipped
echo "X" > 8123_bin.o_shipped
endif

93
Documentation/kernel-parameters.txt
View File

@ -91,6 +91,7 @@ parameter is applicable:
SUSPEND System suspend states are enabled.
FTRACE Function tracing enabled.
TS Appropriate touchscreen support is enabled.
UMS USB Mass Storage support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
V4L Video For Linux support is enabled.
@ -140,6 +141,7 @@ and is between 256 and 4096 characters. It is defined in the file
ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
See also Documentation/power/pm.txt, pci=noacpi
@ -150,16 +152,20 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
old_ordering, s4_nonvs }
See Documentation/power/video.txt for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
s4_nohwsig prevents ACPI hardware signature from being
used during resume from hibernation.
old_ordering causes the ACPI 1.0 ordering of the _PTS
control method, wrt putting devices into low power
states, to be enforced (the ACPI 2.0 ordering of _PTS is
used by default).
control method, with respect to putting devices into
low power states, to be enforced (the ACPI 2.0 ordering
of _PTS is used by default).
s4_nonvs prevents the kernel from saving/restoring the
ACPI NVS memory during hibernation.
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@ -194,7 +200,7 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_skip_timer_override [HW,ACPI]
Recognize and ignore IRQ0/pin2 Interrupt Override.
For broken nForce2 BIOS resulting in XT-PIC timer.
acpi_use_timer_override [HW,ACPI}
acpi_use_timer_override [HW,ACPI]
Use timer override. For some broken Nvidia NF5 boards
that require a timer override, but don't have
HPET
@ -828,8 +834,8 @@ and is between 256 and 4096 characters. It is defined in the file
hlt [BUGS=ARM,SH]
hvc_iucv= [S390] Number of z/VM IUCV Hypervisor console (HVC)
back-ends. Valid parameters: 0..8
hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
terminal devices. Valid values: 0..8
i8042.debug [HW] Toggle i8042 debug mode
i8042.direct [HW] Put keyboard port into non-translated mode
@ -877,17 +883,19 @@ and is between 256 and 4096 characters. It is defined in the file
See Documentation/ide/ide.txt.
idle= [X86]
Format: idle=poll or idle=mwait, idle=halt, idle=nomwait
Poll forces a polling idle loop that can slightly improves the performance
of waking up a idle CPU, but will use a lot of power and make the system
run hot. Not recommended.
idle=mwait. On systems which support MONITOR/MWAIT but the kernel chose
to not use it because it doesn't save as much power as a normal idle
loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same
as idle=poll.
idle=halt. Halt is forced to be used for CPU idle.
Format: idle=poll, idle=mwait, idle=halt, idle=nomwait
Poll forces a polling idle loop that can slightly
improve the performance of waking up a idle CPU, but
will use a lot of power and make the system run hot.
Not recommended.
idle=mwait: On systems which support MONITOR/MWAIT but
the kernel chose to not use it because it doesn't save
as much power as a normal idle loop, use the
MONITOR/MWAIT idle loop anyways. Performance should be
the same as idle=poll.
idle=halt: Halt is forced to be used for CPU idle.
In such case C2/C3 won't be used again.
idle=nomwait. Disable mwait for CPU C-states
idle=nomwait: Disable mwait for CPU C-states
ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
Claim all unknown PCI IDE storage controllers.
@ -918,6 +926,10 @@ and is between 256 and 4096 characters. It is defined in the file
inttest= [IA64]
iomem= Disable strict checking of access to MMIO memory
strict regions from userspace.
relaxed
iommu= [x86]
off
force
@ -1069,8 +1081,8 @@ and is between 256 and 4096 characters. It is defined in the file
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer
in C2 power state.
libata.dma= [LIBATA] DMA control
libata.dma=0 Disable all PATA and SATA DMA
@ -1557,6 +1569,9 @@ and is between 256 and 4096 characters. It is defined in the file
nosoftlockup [KNL] Disable the soft-lockup detector.
noswapaccount [KNL] Disable accounting of swap in memory resource
controller. (See Documentation/controllers/memory.txt)
nosync [HW,M68K] Disables sync negotiation for all devices.
notsc [BUGS=X86-32] Disable Time Stamp Counter
@ -2295,7 +2310,8 @@ and is between 256 and 4096 characters. It is defined in the file
thermal.psv= [HW,ACPI]
-1: disable all passive trip points
<degrees C>: override all passive trip points to this value
<degrees C>: override all passive trip points to this
value
thermal.tzp= [HW,ACPI]
Specify global default ACPI thermal zone polling rate
@ -2383,6 +2399,41 @@ and is between 256 and 4096 characters. It is defined in the file
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
scanned for Logical Units (default 5).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or
override the built-in unusual_devs list. List
entries are separated by commas. Each entry has
the form VID:PID:Flags where VID and PID are Vendor
and Product ID values (4-digit hex numbers) and
Flags is a set of characters, each corresponding
to a common usb-storage quirk flag as follows:
a = SANE_SENSE (collect more than 18 bytes
of sense data);
c = FIX_CAPACITY (decrease the reported
device capacity by one sector);
h = CAPACITY_HEURISTICS (decrease the
reported device capacity by one
sector if the number is odd);
i = IGNORE_DEVICE (don't bind to this
device);
l = NOT_LOCKABLE (don't try to lock and
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
than 64 sectors = 32 KB at a time);
o = CAPACITY_OK (accept the capacity
reported by the device);
r = IGNORE_RESIDUE (the device reports
bogus residue values);
s = SINGLE_LUN (the device has only one
Logical Unit);
w = NO_WP_DETECT (don't test whether the
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
add_efi_memmap [EFI; x86-32,X86-64] Include EFI memory map in
kernel's map of available physical RAM.

31
Documentation/nommu-mmap.txt
View File

@ -109,12 +109,18 @@ and it's also much more restricted in the latter case:
FURTHER NOTES ON NO-MMU MMAP
============================
(*) A request for a private mapping of less than a page in size may not return
a page-aligned buffer. This is because the kernel calls kmalloc() to
allocate the buffer, not get_free_page().
(*) A request for a private mapping of a file may return a buffer that is not
page-aligned. This is because XIP may take place, and the data may not be
paged aligned in the backing store.
(*) A list of all the mappings on the system is visible through /proc/maps in
no-MMU mode.
(*) A request for an anonymous mapping will always be page aligned. If
possible the size of the request should be a power of two otherwise some
of the space may be wasted as the kernel must allocate a power-of-2
granule but will only discard the excess if appropriately configured as
this has an effect on fragmentation.
(*) A list of all the private copy and anonymous mappings on the system is
visible through /proc/maps in no-MMU mode.
(*) A list of all the mappings in use by a process is visible through
/proc/<pid>/maps in no-MMU mode.
@ -242,3 +248,18 @@ PROVIDING SHAREABLE BLOCK DEVICE SUPPORT
Provision of shared mappings on block device files is exactly the same as for
character devices. If there isn't a real device underneath, then the driver
should allocate sufficient contiguous memory to honour any supported mapping.
=================================
ADJUSTING PAGE TRIMMING BEHAVIOUR
=================================
NOMMU mmap automatically rounds up to the nearest power-of-2 number of pages
when performing an allocation. This can have adverse effects on memory
fragmentation, and as such, is left configurable. The default behaviour is to
aggressively trim allocations and discard any excess pages back in to the page
allocator. In order to retain finer-grained control over fragmentation, this
behaviour can either be disabled completely, or bumped up to a higher page
watermark where trimming begins.
Page trimming behaviour is configurable via the sysctl `vm.nr_trim_pages'.

39
Documentation/powerpc/dts-bindings/4xx/ndfc.txt Normal file
View File

@ -0,0 +1,39 @@
AMCC NDFC (NanD Flash Controller)
Required properties:
- compatible : "ibm,ndfc".
- reg : should specify chip select and size used for the chip (0x2000).
Optional properties:
- ccr : NDFC config and control register value (default 0).
- bank-settings : NDFC bank configuration register value (default 0).
Notes:
- partition(s) - follows the OF MTD standard for partitions
Example:
ndfc@1,0 {
compatible = "ibm,ndfc";
reg = <0x00000001 0x00000000 0x00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
#address-cells = <1>;
#size-cells = <1>;
nand {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
reg = <0x00200000 0x03E00000>;
};
};
};

32
Documentation/powerpc/dts-bindings/fsl/board.txt
View File

@ -18,7 +18,7 @@ This is the memory-mapped registers for on board FPGA.
Required properities:
- compatible : should be "fsl,fpga-pixis".
- reg : should contain the address and the lenght of the FPPGA register
- reg : should contain the address and the length of the FPPGA register
set.
Example (MPC8610HPCD):
@ -27,3 +27,33 @@ Example (MPC8610HPCD):
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
};
* Freescale BCSR GPIO banks
Some BCSR registers act as simple GPIO controllers, each such
register can be represented by the gpio-controller node.
Required properities:
- compatible : Should be "fsl,<board>-bcsr-gpio".
- reg : Should contain the address and the length of the GPIO bank
register.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional paramters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example:
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr13: gpio-controller@d {
#gpio-cells = <2>;
compatible = "fsl,mpc8360mds-bcsr-gpio";
reg = <0xd 1>;
gpio-controller;
};
};

4
Documentation/scsi/scsi_fc_transport.txt
View File

@ -191,7 +191,7 @@ Vport States:
This is equivalent to a driver "attach" on an adapter, which is
independent of the adapter's link state.
- Instantiation of the vport on the FC link via ELS traffic, etc.
This is equivalent to a "link up" and successfull link initialization.
This is equivalent to a "link up" and successful link initialization.
Further information can be found in the interfaces section below for
Vport Creation.
@ -320,7 +320,7 @@ Vport Creation:
This is equivalent to a driver "attach" on an adapter, which is
independent of the adapter's link state.
- Instantiation of the vport on the FC link via ELS traffic, etc.
This is equivalent to a "link up" and successfull link initialization.
This is equivalent to a "link up" and successful link initialization.
The LLDD's vport_create() function will not synchronously wait for both
parts to be fully completed before returning. It must validate that the

18
Documentation/sysctl/vm.txt
View File

@ -38,6 +38,7 @@ Currently, these files are in /proc/sys/vm:
- numa_zonelist_order
- nr_hugepages
- nr_overcommit_hugepages
- nr_trim_pages (only if CONFIG_MMU=n)
==============================================================
@ -348,3 +349,20 @@ Change the maximum size of the hugepage pool. The maximum is
nr_hugepages + nr_overcommit_hugepages.
See Documentation/vm/hugetlbpage.txt
==============================================================
nr_trim_pages
This is available only on NOMMU kernels.
This value adjusts the excess page trimming behaviour of power-of-2 aligned
NOMMU mmap allocations.
A value of 0 disables trimming of allocations entirely, while a value of 1
trims excess pages aggressively. Any value >= 1 acts as the watermark where
trimming of allocations is initiated.
The default value is 1.
See Documentation/nommu-mmap.txt for more information.

22
Documentation/usb/power-management.txt
View File

@ -313,11 +313,13 @@ three of the methods listed above. In addition, a driver indicates
that it supports autosuspend by setting the .supports_autosuspend flag
in its usb_driver structure. It is then responsible for informing the
USB core whenever one of its interfaces becomes busy or idle. The
driver does so by calling these three functions:
driver does so by calling these five functions:
int usb_autopm_get_interface(struct usb_interface *intf);
void usb_autopm_put_interface(struct usb_interface *intf);
int usb_autopm_set_interface(struct usb_interface *intf);
int usb_autopm_get_interface_async(struct usb_interface *intf);
void usb_autopm_put_interface_async(struct usb_interface *intf);
The functions work by maintaining a counter in the usb_interface
structure. When intf->pm_usage_count is > 0 then the interface is
@ -330,10 +332,12 @@ associated with the device itself rather than any of its interfaces.
This field is used only by the USB core.)
The driver owns intf->pm_usage_count; it can modify the value however
and whenever it likes. A nice aspect of the usb_autopm_* routines is
that the changes they make are protected by the usb_device structure's
PM mutex (udev->pm_mutex); however drivers may change pm_usage_count
without holding the mutex.
and whenever it likes. A nice aspect of the non-async usb_autopm_*
routines is that the changes they make are protected by the usb_device
structure's PM mutex (udev->pm_mutex); however drivers may change
pm_usage_count without holding the mutex. Drivers using the async
routines are responsible for their own synchronization and mutual
exclusion.
usb_autopm_get_interface() increments pm_usage_count and
attempts an autoresume if the new value is > 0 and the
@ -348,6 +352,14 @@ without holding the mutex.
is suspended, and it attempts an autosuspend if the value is
<= 0 and the device isn't suspended.
usb_autopm_get_interface_async() and
usb_autopm_put_interface_async() do almost the same things as
their non-async counterparts. The differences are: they do
not acquire the PM mutex, and they use a workqueue to do their
jobs. As a result they can be called in an atomic context,
such as an URB's completion handler, but when they return the
device will not generally not yet be in the desired state.
There also are a couple of utility routines drivers can use:
usb_autopm_enable() sets pm_usage_cnt to 0 and then calls

2
Documentation/w1/masters/00-INDEX
View File

@ -4,5 +4,7 @@ ds2482
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
mxc_w1
- W1 master controller driver found on Freescale MX2/MX3 SoCs
w1-gpio
- GPIO 1-wire bus master driver.

11
Documentation/w1/masters/mxc-w1 Normal file
View File

@ -0,0 +1,11 @@
Kernel driver mxc_w1
====================
Supported chips:
* Freescale MX27, MX31 and probably other i.MX SoCs
Datasheets:
http://www.freescale.com/files/32bit/doc/data_sheet/MCIMX31.pdf?fpsp=1
http://www.freescale.com/files/dsp/MCIMX27.pdf?fpsp=1
Author: Originally based on Freescale code, prepared for mainline by
Sascha Hauer <s.hauer@pengutronix.de>

164
Documentation/w1/w1.netlink
View File

@ -5,69 +5,157 @@ Message types.
=============
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
2. Userspace commands. Includes read/write and search/alarm search comamnds.
1. Events. They are generated each time new master or slave device
found either due to automatic or requested search.
2. Userspace commands.
3. Replies to userspace commands.
Protocol.
========
[struct cn_msg] - connector header. It's length field is equal to size of the attached data.
[struct cn_msg] - connector header.
Its length field is equal to size of the attached data
[struct w1_netlink_msg] - w1 netlink header.
__u8 type - message type.
W1_SLAVE_ADD/W1_SLAVE_REMOVE - slave add/remove events.
W1_MASTER_ADD/W1_MASTER_REMOVE - master add/remove events.
W1_MASTER_CMD - userspace command for bus master device (search/alarm search).
W1_SLAVE_CMD - userspace command for slave device (read/write/ search/alarm search
for bus master device where given slave device found).
W1_LIST_MASTERS
list current bus masters
W1_SLAVE_ADD/W1_SLAVE_REMOVE
slave add/remove events
W1_MASTER_ADD/W1_MASTER_REMOVE
master add/remove events
W1_MASTER_CMD
userspace command for bus master
device (search/alarm search)
W1_SLAVE_CMD
userspace command for slave device
(read/write/touch)
__u8 res - reserved
__u16 len - size of attached to this header data.
__u16 len - size of data attached to this header data
union {
__u8 id; - slave unique device id
__u8 id[8]; - slave unique device id
struct w1_mst {
__u32 id; - master's id.
__u32 id; - master's id
__u32 res; - reserved
} mst;
} id;
[strucrt w1_netlink_cmd] - command for gived master or slave device.
[struct w1_netlink_cmd] - command for given master or slave device.
__u8 cmd - command opcode.
W1_CMD_READ - read command.
W1_CMD_WRITE - write command.
W1_CMD_SEARCH - search command.
W1_CMD_ALARM_SEARCH - alarm search command.
W1_CMD_READ - read command
W1_CMD_WRITE - write command
W1_CMD_TOUCH - touch command
(write and sample data back to userspace)
W1_CMD_SEARCH - search command
W1_CMD_ALARM_SEARCH - alarm search command
__u8 res - reserved
__u16 len - length of data for this command.
For read command data must be allocated like for write command.
__u8 data[0] - data for this command.
__u16 len - length of data for this command
For read command data must be allocated like for write command
__u8 data[0] - data for this command
Each connector message can include one or more w1_netlink_msg with zero of more attached w1_netlink_cmd messages.
Each connector message can include one or more w1_netlink_msg with
zero or more attached w1_netlink_cmd messages.
For event messages there are no w1_netlink_cmd embedded structures, only connector header
and w1_netlink_msg strucutre with "len" field being zero and filled type (one of event types)
and id - either 8 bytes of slave unique id in host order, or master's id, which is assigned
to bus master device when it is added to w1 core.
For event messages there are no w1_netlink_cmd embedded structures,
only connector header and w1_netlink_msg strucutre with "len" field
being zero and filled type (one of event types) and id:
either 8 bytes of slave unique id in host order,
or master's id, which is assigned to bus master device
when it is added to w1 core.
Currently replies to userspace commands are only generated for read
command request. One reply is generated exactly for one w1_netlink_cmd
read request. Replies are not combined when sent - i.e. typical reply
messages looks like the following:
Currently replies to userspace commands are only generated for read command request.
One reply is generated exactly for one w1_netlink_cmd read request.
Replies are not combined when sent - i.e. typical reply messages looks like the following:
[cn_msg][w1_netlink_msg][w1_netlink_cmd]
cn_msg.len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd) + cmd->len;
cn_msg.len = sizeof(struct w1_netlink_msg) +
sizeof(struct w1_netlink_cmd) +
cmd->len;
w1_netlink_msg.len = sizeof(struct w1_netlink_cmd) + cmd->len;
w1_netlink_cmd.len = cmd->len;
Replies to W1_LIST_MASTERS should send a message back to the userspace
which will contain list of all registered master ids in the following
format:
cn_msg (CN_W1_IDX.CN_W1_VAL as id, len is equal to sizeof(struct
w1_netlink_msg) plus number of masters multipled by 4)
w1_netlink_msg (type: W1_LIST_MASTERS, len is equal to
number of masters multiplied by 4 (u32 size))
id0 ... idN
Each message is at most 4k in size, so if number of master devices
exceeds this, it will be split into several messages,
cn.seq will be increased for each one.
W1 search and alarm search commands.
request:
[cn_msg]
[w1_netlink_msg type = W1_MASTER_CMD
id is equal to the bus master id to use for searching]
[w1_netlink_cmd cmd = W1_CMD_SEARCH or W1_CMD_ALARM_SEARCH]
reply:
[cn_msg, ack = 1 and increasing, 0 means the last message,
seq is equal to the request seq]
[w1_netlink_msg type = W1_MASTER_CMD]
[w1_netlink_cmd cmd = W1_CMD_SEARCH or W1_CMD_ALARM_SEARCH
len is equal to number of IDs multiplied by 8]
[64bit-id0 ... 64bit-idN]
Length in each header corresponds to the size of the data behind it, so
w1_netlink_cmd->len = N * 8; where N is number of IDs in this message.
Can be zero.
w1_netlink_msg->len = sizeof(struct w1_netlink_cmd) + N * 8;
cn_msg->len = sizeof(struct w1_netlink_msg) +
sizeof(struct w1_netlink_cmd) +
N*8;
W1 reset command.
[cn_msg]
[w1_netlink_msg type = W1_MASTER_CMD
id is equal to the bus master id to use for searching]
[w1_netlink_cmd cmd = W1_CMD_RESET]
Command status replies.
======================
Each command (either root, master or slave with or without w1_netlink_cmd
structure) will be 'acked' by the w1 core. Format of the reply is the same
as request message except that length parameters do not account for data
requested by the user, i.e. read/write/touch IO requests will not contain
data, so w1_netlink_cmd.len will be 0, w1_netlink_msg.len will be size
of the w1_netlink_cmd structure and cn_msg.len will be equal to the sum
of the sizeof(struct w1_netlink_msg) and sizeof(struct w1_netlink_cmd).
If reply is generated for master or root command (which do not have
w1_netlink_cmd attached), reply will contain only cn_msg and w1_netlink_msg
structires.
w1_netlink_msg.status field will carry positive error value
(EINVAL for example) or zero in case of success.
All other fields in every structure will mirror the same parameters in the
request message (except lengths as described above).
Status reply is generated for every w1_netlink_cmd embedded in the
w1_netlink_msg, if there are no w1_netlink_cmd structures,
reply will be generated for the w1_netlink_msg.
All w1_netlink_cmd command structures are handled in every w1_netlink_msg,
even if there were errors, only length mismatch interrupts message processing.
Operation steps in w1 core when new command is received.
=======================================================
When new message (w1_netlink_msg) is received w1 core detects if it is master of slave request,
according to w1_netlink_msg.type field.
When new message (w1_netlink_msg) is received w1 core detects if it is
master or slave request, according to w1_netlink_msg.type field.
Then master or slave device is searched for.
When found, master device (requested or those one on where slave device is found) is locked.
If slave command is requested, then reset/select procedure is started to select given device.
When found, master device (requested or those one on where slave device
is found) is locked. If slave command is requested, then reset/select
procedure is started to select given device.
Then all requested in w1_netlink_msg operations are performed one by one.
If command requires reply (like read command) it is sent on command completion.
@ -82,8 +170,8 @@ Connector [1] specific documentation.
Each connector message includes two u32 fields as "address".
w1 uses CN_W1_IDX and CN_W1_VAL defined in include/linux/connector.h header.
Each message also includes sequence and acknowledge numbers.
Sequence number for event messages is appropriate bus master sequence number increased with
each event message sent "through" this master.
Sequence number for event messages is appropriate bus master sequence number
increased with each event message sent "through" this master.
Sequence number for userspace requests is set by userspace application.
Sequence number for reply is the same as was in request, and
acknowledge number is set to seq+1.
@ -93,6 +181,6 @@ Additional documantion, source code examples.
============================================
1. Documentation/connector
2. http://tservice.net.ru/~s0mbre/archive/w1
This archive includes userspace application w1d.c which
uses read/write/search commands for all master/slave devices found on the bus.
2. http://www.ioremap.net/archive/w1
This archive includes userspace application w1d.c which uses
read/write/search commands for all master/slave devices found on the bus.

260
Documentation/wimax/README.i2400m Normal file
View File

@ -0,0 +1,260 @@
Driver for the Intel Wireless Wimax Connection 2400m
(C) 2008 Intel Corporation < linux-wimax@intel.com >
This provides a driver for the Intel Wireless WiMAX Connection 2400m
and a basic Linux kernel WiMAX stack.
1. Requirements
* Linux installation with Linux kernel 2.6.22 or newer (if building
from a separate tree)
* Intel i2400m Echo Peak or Baxter Peak; this includes the Intel
Wireless WiMAX/WiFi Link 5x50 series.
* build tools:
+ Linux kernel development package for the target kernel; to
build against your currently running kernel, you need to have
the kernel development package corresponding to the running
image installed (usually if your kernel is named
linux-VERSION, the development package is called
linux-dev-VERSION or linux-headers-VERSION).
+ GNU C Compiler, make
2. Compilation and installation
2.1. Compilation of the drivers included in the kernel
Configure the kernel; to enable the WiMAX drivers select Drivers >
Networking Drivers > WiMAX device support. Enable all of them as
modules (easier).
If USB or SDIO are not enabled in the kernel configuration, the options
to build the i2400m USB or SDIO drivers will not show. Enable said
subsystems and go back to the WiMAX menu to enable the drivers.
Compile and install your kernel as usual.
2.2. Compilation of the drivers distributed as an standalone module
To compile
$ cd source/directory
$ make
Once built you can load and unload using the provided load.sh script;
load.sh will load the modules, load.sh u will unload them.
To install in the default kernel directories (and enable auto loading
when the device is plugged):
$ make install
$ depmod -a
If your kernel development files are located in a non standard
directory or if you want to build for a kernel that is not the
currently running one, set KDIR to the right location:
$ make KDIR=/path/to/kernel/dev/tree
For more information, please contact linux-wimax@intel.com.
3. Installing the firmware
The firmware can be obtained from http://linuxwimax.org or might have
been supplied with your hardware.
It has to be installed in the target system:
*
$ cp FIRMWAREFILE.sbcf /lib/firmware/i2400m-fw-BUSTYPE-1.3.sbcf
* NOTE: if your firmware came in an .rpm or .deb file, just install
it as normal, with the rpm (rpm -i FIRMWARE.rpm) or dpkg
(dpkg -i FIRMWARE.deb) commands. No further action is needed.
* BUSTYPE will be usb or sdio, depending on the hardware you have.
Each hardware type comes with its own firmware and will not work
with other types.
4. Design
This package contains two major parts: a WiMAX kernel stack and a
driver for the Intel i2400m.
The WiMAX stack is designed to provide for common WiMAX control
services to current and future WiMAX devices from any vendor; please
see README.wimax for details.
The i2400m kernel driver is broken up in two main parts: the bus
generic driver and the bus-specific drivers. The bus generic driver
forms the drivercore and contain no knowledge of the actual method we
use to connect to the device. The bus specific drivers are just the
glue to connect the bus-generic driver and the device. Currently only
USB and SDIO are supported. See drivers/net/wimax/i2400m/i2400m.h for
more information.
The bus generic driver is logically broken up in two parts: OS-glue and
hardware-glue. The OS-glue interfaces with Linux. The hardware-glue
interfaces with the device on using an interface provided by the
bus-specific driver. The reason for this breakup is to be able to
easily reuse the hardware-glue to write drivers for other OSes; note
the hardware glue part is written as a native Linux driver; no
abstraction layers are used, so to port to another OS, the Linux kernel
API calls should be replaced with the target OS's.
5. Usage
To load the driver, follow the instructions in the install section;
once the driver is loaded, plug in the device (unless it is permanently
plugged in). The driver will enumerate the device, upload the firmware
and output messages in the kernel log (dmesg, /var/log/messages or
/var/log/kern.log) such as:
...
i2400m_usb 5-4:1.0: firmware interface version 8.0.0
i2400m_usb 5-4:1.0: WiMAX interface wmx0 (00:1d:e1:01:94:2c) ready
At this point the device is ready to work.
Current versions require the Intel WiMAX Network Service in userspace
to make things work. See the network service's README for instructions
on how to scan, connect and disconnect.
5.1. Module parameters
Module parameters can be set at kernel or module load time or by
echoing values:
$ echo VALUE > /sys/module/MODULENAME/parameters/PARAMETERNAME
To make changes permanent, for example, for the i2400m module, you can
also create a file named /etc/modprobe.d/i2400m containing:
options i2400m idle_mode_disabled=1
To find which parameters are supported by a module, run:
$ modinfo path/to/module.ko
During kernel bootup (if the driver is linked in the kernel), specify
the following to the kernel command line:
i2400m.PARAMETER=VALUE
5.1.1. i2400m: idle_mode_disabled
The i2400m module supports a parameter to disable idle mode. This
parameter, once set, will take effect only when the device is
reinitialized by the driver (eg: following a reset or a reconnect).
5.2. Debug operations: debugfs entries
The driver will register debugfs entries that allow the user to tweak
debug settings. There are three main container directories where
entries are placed, which correspond to the three blocks a i2400m WiMAX
driver has:
* /sys/kernel/debug/wimax:DEVNAME/ for the generic WiMAX stack
controls
* /sys/kernel/debug/wimax:DEVNAME/i2400m for the i2400m generic
driver controls
* /sys/kernel/debug/wimax:DEVNAME/i2400m-usb (or -sdio) for the
bus-specific i2400m-usb or i2400m-sdio controls).
Of course, if debugfs is mounted in a directory other than
/sys/kernel/debug, those paths will change.
5.2.1. Increasing debug output
The files named *dl_* indicate knobs for controlling the debug output
of different submodules:
*
# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\*
/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_tx
/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_rx
/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_notif
/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_fw
/sys/kernel/debug/wimax:wmx0/i2400m-usb/dl_usb
/sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
/sys/kernel/debug/wimax:wmx0/i2400m/dl_rx
/sys/kernel/debug/wimax:wmx0/i2400m/dl_rfkill
/sys/kernel/debug/wimax:wmx0/i2400m/dl_netdev
/sys/kernel/debug/wimax:wmx0/i2400m/dl_fw
/sys/kernel/debug/wimax:wmx0/i2400m/dl_debugfs
/sys/kernel/debug/wimax:wmx0/i2400m/dl_driver
/sys/kernel/debug/wimax:wmx0/i2400m/dl_control
/sys/kernel/debug/wimax:wmx0/wimax_dl_stack
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg
/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table
/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs
By reading the file you can obtain the current value of said debug
level; by writing to it, you can set it.
To increase the debug level of, for example, the i2400m's generic TX
engine, just write:
$ echo 3 > /sys/kernel/debug/wimax:wmx0/i2400m/dl_tx
Increasing numbers yield increasing debug information; for details of
what is printed and the available levels, check the source. The code
uses 0 for disabled and increasing values until 8.
5.2.2. RX and TX statistics
The i2400m/rx_stats and i2400m/tx_stats provide statistics about the
data reception/delivery from the device:
$ cat /sys/kernel/debug/wimax:wmx0/i2400m/rx_stats
45 1 3 34 3104 48 480
The numbers reported are
* packets/RX-buffer: total, min, max
* RX-buffers: total RX buffers received, accumulated RX buffer size
in bytes, min size received, max size received
Thus, to find the average buffer size received, divide accumulated
RX-buffer / total RX-buffers.
To clear the statistics back to 0, write anything to the rx_stats file:
$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m_rx_stats
Likewise for TX.
Note the packets this debug file refers to are not network packet, but
packets in the sense of the device-specific protocol for communication
to the host. See drivers/net/wimax/i2400m/tx.c.
5.2.3. Tracing messages received from user space
To echo messages received from user space into the trace pipe that the
i2400m driver creates, set the debug file i2400m/trace_msg_from_user to
1:
*
$ echo 1 > /sys/kernel/debug/wimax:wmx0/i2400m/trace_msg_from_user
5.2.4. Performing a device reset
By writing a 0, a 1 or a 2 to the file
/sys/kernel/debug/wimax:wmx0/reset, the driver performs a warm (without
disconnecting from the bus), cold (disconnecting from the bus) or bus
(bus specific) reset on the device.
5.2.5. Asking the device to enter power saving mode
By writing any value to the /sys/kernel/debug/wimax:wmx0 file, the
device will attempt to enter power saving mode.
6. Troubleshooting
6.1. Driver complains about 'i2400m-fw-usb-1.2.sbcf: request failed'
If upon connecting the device, the following is output in the kernel
log:
i2400m_usb 5-4:1.0: fw i2400m-fw-usb-1.3.sbcf: request failed: -2
This means that the driver cannot locate the firmware file named
/lib/firmware/i2400m-fw-usb-1.2.sbcf. Check that the file is present in
the right location.

81
Documentation/wimax/README.wimax Normal file
View File

@ -0,0 +1,81 @@
Linux kernel WiMAX stack
(C) 2008 Intel Corporation < linux-wimax@intel.com >
This provides a basic Linux kernel WiMAX stack to provide a common
control API for WiMAX devices, usable from kernel and user space.
1. Design
The WiMAX stack is designed to provide for common WiMAX control
services to current and future WiMAX devices from any vendor.
Because currently there is only one and we don't know what would be the
common services, the APIs it currently provides are very minimal.
However, it is done in such a way that it is easily extensible to
accommodate future requirements.
The stack works by embedding a struct wimax_dev in your device's
control structures. This provides a set of callbacks that the WiMAX
stack will call in order to implement control operations requested by
the user. As well, the stack provides API functions that the driver
calls to notify about changes of state in the device.
The stack exports the API calls needed to control the device to user
space using generic netlink as a marshalling mechanism. You can access
them using your own code or use the wrappers provided for your
convenience in libwimax (in the wimax-tools package).
For detailed information on the stack, please see
include/linux/wimax.h.
2. Usage
For usage in a driver (registration, API, etc) please refer to the
instructions in the header file include/linux/wimax.h.
When a device is registered with the WiMAX stack, a set of debugfs
files will appear in /sys/kernel/debug/wimax:wmxX can tweak for
control.
2.1. Obtaining debug information: debugfs entries
The WiMAX stack is compiled, by default, with debug messages that can
be used to diagnose issues. By default, said messages are disabled.
The drivers will register debugfs entries that allow the user to tweak
debug settings.
Each driver, when registering with the stack, will cause a debugfs
directory named wimax:DEVICENAME to be created; optionally, it might
create more subentries below it.
2.1.1. Increasing debug output
The files named *dl_* indicate knobs for controlling the debug output
of different submodules of the WiMAX stack:
*
# find /sys/kernel/debug/wimax\:wmx0 -name \*dl_\*
/sys/kernel/debug/wimax:wmx0/wimax_dl_stack
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_rfkill
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_reset
/sys/kernel/debug/wimax:wmx0/wimax_dl_op_msg
/sys/kernel/debug/wimax:wmx0/wimax_dl_id_table
/sys/kernel/debug/wimax:wmx0/wimax_dl_debugfs
/sys/kernel/debug/wimax:wmx0/.... # other driver specific files
NOTE: Of course, if debugfs is mounted in a directory other than
/sys/kernel/debug, those paths will change.
By reading the file you can obtain the current value of said debug
level; by writing to it, you can set it.
To increase the debug level of, for example, the id-table submodule,
just write:
$ echo 3 > /sys/kernel/debug/wimax:wmx0/wimax_dl_id_table
Increasing numbers yield increasing debug information; for details of
what is printed and the available levels, check the source. The code
uses 0 for disabled and increasing values until 8.

2
Documentation/x86/boot.txt
View File

@ -44,7 +44,7 @@ Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol.
and KEEP_SEGMENTS flag in load_flags.
Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format
payload. Introduced payload_offset and payload length
payload. Introduced payload_offset and payload_length
fields to aid in locating the payload.
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical

100
MAINTAINERS
View File

@ -1024,16 +1024,17 @@ S: Maintained
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-media@vger.kernel.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
CALGARY x86-64 IOMMU
@ -1261,7 +1262,8 @@ P: Hans Verkuil, Andy Walls
M: hverkuil@xs4all.nl, awalls@radix.net
L: ivtv-devel@ivtvdriver.org
L: ivtv-users@ivtvdriver.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
S: Maintained
@ -1358,6 +1360,11 @@ P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
DELL LAPTOP DRIVER
P: Matthew Garrett
M: mjg59@srcf.ucam.org
S: Maintained
DELL LAPTOP SMM DRIVER
P: Massimo Dal Zotto
M: dz@debian.org
@ -1487,10 +1494,10 @@ S: Maintained
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: v4l-dvb-maintainer@linuxtv.org
M: linux-media@vger.kernel.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
DZ DECSTATION DZ11 SERIAL DRIVER
@ -1882,32 +1889,37 @@ S: Maintained
GSPCA FINEPIX SUBDRIVER
P: Frank Zago
M: frank@zago.net
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
GSPCA M5602 SUBDRIVER
P: Erik Andren
M: erik.andren@gmail.com
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
GSPCA PAC207 SONIXB SUBDRIVER
P: Hans de Goede
M: hdegoede@redhat.com
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
GSPCA T613 SUBDRIVER
P: Leandro Costantino
M: lcostantino@gmail.com
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
GSPCA USB WEBCAM DRIVER
P: Jean-Francois Moine
M: moinejf@free.fr
W: http://moinejf.free.fr
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
HARDWARE MONITORING
@ -2305,6 +2317,14 @@ W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
INTEL WIRELESS WIMAX CONNECTION 2400
P: Inaky Perez-Gonzalez
M: inaky.perez-gonzalez@intel.com
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
INTEL WIRELESS WIFI LINK (iwlwifi)
P: Zhu Yi
M: yi.zhu@intel.com
@ -2429,7 +2449,8 @@ P: Hans Verkuil
M: hverkuil@xs4all.nl
L: ivtv-devel@ivtvdriver.org
L: ivtv-users@ivtvdriver.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
S: Maintained
@ -2982,6 +3003,7 @@ MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
P: Felipe Balbi
M: felipe.balbi@nokia.com
L: linux-usb@vger.kernel.org
T: git gitorious.org:/musb/mainline.git
S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
@ -3188,7 +3210,8 @@ S: Maintained
OMNIVISION OV7670 SENSOR DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
ONENAND FLASH DRIVER
@ -3466,12 +3489,19 @@ L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
PS3VRAM DRIVER
P: Jim Paris
M: jim@jtan.com
L: cbe-oss-dev@ozlabs.org
S: Maintained
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
L: pvrusb2@isely.net (subscribers-only)
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
W: http://www.isely.net/pvrusb2/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
PXA2xx/PXA3xx SUPPORT
@ -3691,6 +3721,8 @@ S: Supported
SAA7146 VIDEO4LINUX-2 DRIVER
P: Michael Hunold
M: michael@mihu.de
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.mihu.de/linux/saa7146
S: Maintained
@ -3954,7 +3986,8 @@ S: Maintained
SOC-CAMERA V4L2 SUBSYSTEM
P: Guennadi Liakhovetski
M: g.liakhovetski@gmx.de
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
SOEKRIS NET48XX LED SUPPORT
@ -4048,6 +4081,13 @@ L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
SQUASHFS FILE SYSTEM
P: Phillip Lougher
M: phillip@lougher.demon.co.uk
L: squashfs-devel@lists.sourceforge.net (subscribers-only)
W: http://squashfs.org.uk
S: Maintained
SRM (Alpha) environment access
P: Jan-Benedict Glaw
M: jbglaw@lug-owl.de
@ -4373,7 +4413,8 @@ USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
@ -4522,7 +4563,8 @@ USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
@ -4551,7 +4593,8 @@ USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linux-uvc.berlios.de
S: Maintained
@ -4559,7 +4602,8 @@ USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
@ -4573,7 +4617,8 @@ USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
@ -4588,7 +4633,8 @@ USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
L: linux-media@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://royale.zerezo.com/zr364xx/
S: Maintained
@ -4657,10 +4703,10 @@ S: Maintained
VIDEO FOR LINUX (V4L)
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-media@vger.kernel.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
VLAN (802.1Q)
@ -4733,6 +4779,14 @@ M: zaga@fly.cc.fer.hr
L: linux-scsi@vger.kernel.org
S: Maintained
WIMAX STACK
P: Inaky Perez-Gonzalez
M: inaky.perez-gonzalez@intel.com
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
P: David Vrabel
M: david.vrabel@csr.com

5
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
EXTRAVERSION =
SUBLEVEL = 29
EXTRAVERSION = -rc1
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
@ -965,6 +965,7 @@ ifneq ($(KBUILD_SRC),)
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
ln -fsn $(srctree) source
endif
# prepare2 creates a makefile if using a separate output directory

18
arch/alpha/kernel/pci.c
View File

@ -320,24 +320,6 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
/* Most Alphas have straight-forward swizzling needs. */
u8 __init
common_swizzle(struct pci_dev *dev, u8 *pinp)
{
u8 pin = *pinp;
while (dev->bus->parent) {
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
/* Move up the chain of bridges. */
dev = dev->bus->self;
}
*pinp = pin;
/* The slot is the slot of the last bridge. */
return PCI_SLOT(dev->devfn);
}
void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)

13
arch/alpha/kernel/pci_impl.h
View File

@ -106,16 +106,11 @@ struct pci_iommu_arena;
* Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
* Thus, each swizzle is ((pin-1) + (device#-4)) % 4
*
* The following code swizzles for exactly one bridge. The routine
* common_swizzle below handles multiple bridges. But there are a
* couple boards that do strange things, so we define this here.
* pci_swizzle_interrupt_pin() swizzles for exactly one bridge. The routine
* pci_common_swizzle() handles multiple bridges. But there are a
* couple boards that do strange things.
*/
static inline u8 bridge_swizzle(u8 pin, u8 slot)
{
return (((pin-1) + slot) % 4) + 1;
}
/* The following macro is used to implement the table-based irq mapping
function for all single-bus Alphas. */
@ -184,7 +179,7 @@ extern int pci_probe_only;
extern unsigned long alpha_agpgart_size;
extern void common_init_pci(void);
extern u8 common_swizzle(struct pci_dev *, u8 *);
#define common_swizzle pci_common_swizzle
extern struct pci_controller *alloc_pci_controller(void);
extern struct resource *alloc_resource(void);

2
arch/alpha/kernel/sys_dp264.c
View File

@ -481,7 +481,7 @@ monet_swizzle(struct pci_dev *dev, u8 *pinp)
slot = PCI_SLOT(dev->devfn);
break;
}
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

2
arch/alpha/kernel/sys_eiger.c
View File

@ -204,7 +204,7 @@ eiger_swizzle(struct pci_dev *dev, u8 *pinp)
break;
}
/* Must be a card-based bridge. */
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

2
arch/alpha/kernel/sys_miata.c
View File

@ -219,7 +219,7 @@ miata_swizzle(struct pci_dev *dev, u8 *pinp)
slot = PCI_SLOT(dev->devfn) + 9;
break;
}
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

2
arch/alpha/kernel/sys_noritake.c
View File

@ -257,7 +257,7 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
slot = PCI_SLOT(dev->devfn) + 15;
break;
}
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

2
arch/alpha/kernel/sys_ruffian.c
View File

@ -160,7 +160,7 @@ ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
slot = PCI_SLOT(dev->devfn) + 10;
break;
}
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

2
arch/alpha/kernel/sys_sable.c
View File

@ -425,7 +425,7 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp)
slot = PCI_SLOT(dev->devfn) + 11;
break;
}
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
pin = pci_swizzle_interrupt_pin(dev, pin);
/* Move up the chain of bridges. */
dev = dev->bus->self;

801
arch/arm/configs/clps7500_defconfig
View File

@ -1,801 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 17:20:48 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# System Type
#
CONFIG_ARCH_CLPS7500=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM710=y
CONFIG_CPU_32v3=y
CONFIG_CPU_CACHE_V3=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V3=y
CONFIG_CPU_TLB_V3=y
#
# Processor Features
#
CONFIG_TIMER_ACORN=y
#
# Bus support
#
CONFIG_ISA=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=16M root=nfs"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_CS89x0=y
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_RPCKBD=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_ACORN=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

2
arch/arm/include/asm/mach/pci.h
View File

@ -42,7 +42,7 @@ struct pci_sys_data {
/*
* This is the standard PCI-PCI bridge swizzling algorithm.
*/
u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
#define pci_std_swizzle pci_common_swizzle
/*
* Call this with your hw_pci struct to initialise the PCI system.

1
arch/arm/include/asm/mmu.h
View File

@ -24,7 +24,6 @@ typedef struct {
* modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
*/
typedef struct {
struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;

27
arch/arm/kernel/bios32.c
View File

@ -479,33 +479,6 @@ EXPORT_SYMBOL(pcibios_resource_to_bus);
EXPORT_SYMBOL(pcibios_bus_to_resource);
#endif
/*
* This is the standard PCI-PCI bridge swizzling algorithm:
*
* Dev: 0 1 2 3
* A A B C D
* B B C D A
* C C D A B
* D D A B C
* ^^^^^^^^^^ irq pin on bridge
*/
u8 __devinit pci_std_swizzle(struct pci_dev *dev, u8 *pinp)
{
int pin = *pinp - 1;
while (dev->bus->self) {
pin = (pin + PCI_SLOT(dev->devfn)) & 3;
/*
* move up the chain of bridges,
* swizzling as we go.
*/
dev = dev->bus->self;
}
*pinp = pin + 1;
return PCI_SLOT(dev->devfn);
}
/*
* Swizzle the device pin each time we cross a bridge.
* This might update pin and returns the slot number.

1
arch/arm/kernel/isa.c
View File

@ -16,6 +16,7 @@
#include <linux/fs.h>
#include <linux/sysctl.h>
#include <linux/init.h>
#include <linux/io.h>
static unsigned int isa_membase, isa_portbase, isa_portshift;

1
arch/arm/mach-at91/at91cap9.c
View File

@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

1
arch/arm/mach-at91/at91rm9200.c
View File

@ -12,6 +12,7 @@
#include <linux/module.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91rm9200.h>

1
arch/arm/mach-at91/at91sam9260.c
View File

@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/cpu.h>

1
arch/arm/mach-at91/at91sam9261.c
View File

@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9261.h>

1
arch/arm/mach-at91/at91sam9263.c
View File

@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9263.h>

1
arch/arm/mach-at91/at91sam9rl.c
View File

@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/cpu.h>

1
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include "sam9_smc.h"

1
arch/arm/mach-clps711x/edb7211-mm.c
View File

@ -24,7 +24,6 @@
#include <mach/hardware.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>

1
arch/arm/mach-clps711x/fortunet.c
View File

@ -24,7 +24,6 @@
#include <linux/initrd.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>

1
arch/arm/mach-davinci/devices.c
View File

@ -20,6 +20,7 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
static struct resource i2c_resources[] = {
{

1
arch/arm/mach-davinci/include/mach/gpio.h
View File

@ -16,6 +16,7 @@
#include <linux/io.h>
#include <asm-generic/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
/*
* basic gpio routines

9
arch/arm/mach-footbridge/common.c
View File

@ -28,12 +28,17 @@
#include "common.h"
extern void __init isa_init_irq(unsigned int irq);
unsigned int mem_fclk_21285 = 50000000;
EXPORT_SYMBOL(mem_fclk_21285);
static void __init early_fclk(char **arg)
{
mem_fclk_21285 = simple_strtoul(*arg, arg, 0);
}
__early_param("mem_fclk_21285=", early_fclk);
static int __init parse_tag_memclk(const struct tag *tag)
{
mem_fclk_21285 = tag->u.memclk.fmemclk;

1
arch/arm/mach-footbridge/common.h
View File

@ -7,3 +7,4 @@ extern void isa_rtc_init(void);
extern void footbridge_map_io(void);
extern void footbridge_init_irq(void);
extern void isa_init_irq(unsigned int irq);

23
arch/arm/mach-footbridge/dc21285.c
View File

@ -287,6 +287,9 @@ struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
return pci_scan_bus(0, &dc21285_ops, sys);
}
#define dc21285_request_irq(_a, _b, _c, _d, _e) \
WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
void __init dc21285_preinit(void)
{
unsigned int mem_size, mem_mask;
@ -335,16 +338,16 @@ void __init dc21285_preinit(void)
/*
* We don't care if these fail.
*/
request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
"PCI system error", &serr_timer);
request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
"PCI parity error", &perr_timer);
request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
"PCI abort", NULL);
request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
"Discard timer", NULL);
request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
"PCI data parity", NULL);
dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
"PCI system error", &serr_timer);
dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
"PCI parity error", &perr_timer);
dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
"PCI abort", NULL);
dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
"Discard timer", NULL);
dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
"PCI data parity", NULL);
if (cfn_mode) {
static struct resource csrio;

2
arch/arm/mach-footbridge/isa-irq.c
View File

@ -28,6 +28,8 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include "common.h"
static void isa_mask_pic_lo_irq(unsigned int irq)
{
unsigned int mask = 1 << (irq & 7);

1
arch/arm/mach-h720x/h7202-eval.c
View File

@ -25,6 +25,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mach/arch.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include "common.h"

11
arch/arm/mach-integrator/pci.c
View File

@ -63,13 +63,7 @@
*
* Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
* Thus, each swizzle is ((pin-1) + (device#-4)) % 4
*
* The following code swizzles for exactly one bridge.
*/
static inline int bridge_swizzle(int pin, unsigned int slot)
{
return (pin + slot) & 3;
}
/*
* This routine handles multiple bridges.
@ -81,15 +75,14 @@ static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp)
if (pin == 0)
pin = 1;
pin -= 1;
while (dev->bus->self) {
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
pin = pci_swizzle_interrupt_pin(dev, pin);
/*
* move up the chain of bridges, swizzling as we go.
*/
dev = dev->bus->self;
}
*pinp = pin + 1;
*pinp = pin;
return PCI_SLOT(dev->devfn);
}

1
arch/arm/mach-kirkwood/common.c
View File

@ -698,6 +698,7 @@ void __init kirkwood_init(void)
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
kirkwood_id(), kirkwood_tclk);
kirkwood_ge00_shared_data.t_clk = kirkwood_tclk;
kirkwood_ge01_shared_data.t_clk = kirkwood_tclk;
kirkwood_spi_plat_data.tclk = kirkwood_tclk;
kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
kirkwood_uart1_data[0].uartclk = kirkwood_tclk;

1
arch/arm/mach-kirkwood/pcie.c
View File

@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include "common.h"

1
arch/arm/mach-ks8695/devices.c
View File

@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/regs-wan.h>
#include <mach/regs-lan.h>
#include <mach/regs-hpna.h>

1
arch/arm/mach-msm/devices.c
View File

@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/msm_iomap.h>
#include "devices.h"

1
arch/arm/mach-mv78xx0/pcie.c
View File

@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include "common.h"

1
arch/arm/mach-mx2/devices.c
View File

@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
/*

1
arch/arm/mach-mx3/devices.c
View File

@ -22,6 +22,7 @@
#include <linux/serial.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/imx-uart.h>
static struct resource uart0[] = {

2
arch/arm/mach-netx/fb.c
View File

@ -24,6 +24,8 @@
#include <linux/amba/clcd.h>
#include <linux/err.h>
#include <asm/irq.h>
#include <mach/netx-regs.h>
#include <mach/hardware.h>

2
arch/arm/mach-netx/time.c
View File

@ -163,7 +163,7 @@ static void __init netx_timer_init(void)
* Adding some safety ... */
netx_clockevent.min_delta_ns =
clockevent_delta2ns(0xa00, &netx_clockevent);
netx_clockevent.cpumask = cpumask_of_cpu(0);
netx_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&netx_clockevent);
}

1
arch/arm/mach-netx/xc.c
View File

@ -24,6 +24,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/netx-regs.h>
#include <mach/xc.h>

1
arch/arm/mach-omap1/mcbsp.c
View File

@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>

1
arch/arm/mach-omap2/mcbsp.c
View File

@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>

1
arch/arm/mach-orion5x/pci.c
View File

@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include "common.h"

1
arch/arm/mach-pnx4008/gpio.c
View File

@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/gpio.h>

1
arch/arm/mach-pnx4008/i2c.c
View File

@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/err.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#include <mach/i2c.h>
static int set_clock_run(struct platform_device *pdev)

54
arch/arm/mach-pxa/corgi.c
View File

@ -27,6 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@ -542,6 +543,55 @@ err_free_1:
static inline void corgi_init_spi(void) {}
#endif
static struct mtd_partition sharpsl_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
},
{
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
.size = 25 * 1024 * 1024,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr sharpsl_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
.badblock_pattern = &sharpsl_bbt,
.partitions = sharpsl_nand_partitions,
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
};
static struct resource sharpsl_nand_resources[] = {
{
.start = 0x0C000000,
.end = 0x0C000FFF,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_nand_device = {
.name = "sharpsl-nand",
.id = -1,
.resource = sharpsl_nand_resources,
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
.dev.platform_data = &sharpsl_nand_platform_data,
};
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
@ -577,6 +627,7 @@ static struct platform_device *devices[] __initdata = {
&corgifb_device,
&corgikbd_device,
&corgiled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};
@ -617,6 +668,9 @@ static void __init corgi_init(void)
platform_scoop_config = &corgi_pcmcia_config;
if (machine_is_husky())
sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
platform_add_devices(devices, ARRAY_SIZE(devices));
}

1
arch/arm/mach-pxa/e350.c
View File

@ -20,6 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>

1
arch/arm/mach-pxa/e400.c
View File

@ -28,6 +28,7 @@
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"

1
arch/arm/mach-pxa/e740.c
View File

@ -30,6 +30,7 @@
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"

53
arch/arm/mach-pxa/e750.c
View File

@ -29,6 +29,7 @@
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"
@ -105,6 +106,57 @@ static struct platform_device e750_fb_device = {
.resource = e750_fb_resources,
};
/* -------------------- e750 MFP parameters -------------------- */
static unsigned long e750_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO79_nCS_3, /* CS3 - IMAGEON */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO11_3_6MHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* UDC */
GPIO13_GPIO,
GPIO3_GPIO,
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
GPIO11_GPIO, /* IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO20_GPIO, /* PWR0 */
GPIO23_GPIO, /* PWR1 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ----------------- e750 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e750_tc6393xb_info = {
@ -137,6 +189,7 @@ static struct platform_device *devices[] __initdata = {
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();

1
arch/arm/mach-pxa/e800.c
View File

@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"

2
arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
View File

@ -193,10 +193,8 @@
#define CKEN_MINI_IM 48 /* < Mini-IM */
#define CKEN_MINI_LCD 49 /* < Mini LCD */
#if defined(CONFIG_CPU_PXA310)
#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
#define CKEN_MVED 43 /* < MVED clock enable */
#endif
/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */

51
arch/arm/mach-pxa/poodle.c
View File

@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/mtd/sharpsl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -414,6 +415,55 @@ static struct pxafb_mach_info poodle_fb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static struct mtd_partition sharpsl_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
},
{
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
.size = 22 * 1024 * 1024,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr sharpsl_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
.badblock_pattern = &sharpsl_bbt,
.partitions = sharpsl_nand_partitions,
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
};
static struct resource sharpsl_nand_resources[] = {
{
.start = 0x0C000000,
.end = 0x0C000FFF,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_nand_device = {
.name = "sharpsl-nand",
.id = -1,
.resource = sharpsl_nand_resources,
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
.dev.platform_data = &sharpsl_nand_platform_data,
};
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
@ -447,6 +497,7 @@ static struct platform_device sharpsl_rom_device = {
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};

77
arch/arm/mach-pxa/spitz.c
View File

@ -31,6 +31,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
#include <asm/setup.h>
#include <asm/memory.h>
@ -613,6 +614,54 @@ static struct pxafb_mach_info spitz_pxafb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
};
static struct mtd_partition sharpsl_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
},
{
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr sharpsl_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
.badblock_pattern = &sharpsl_bbt,
.partitions = sharpsl_nand_partitions,
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
};
static struct resource sharpsl_nand_resources[] = {
{
.start = 0x0C000000,
.end = 0x0C000FFF,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_nand_device = {
.name = "sharpsl-nand",
.id = -1,
.resource = sharpsl_nand_resources,
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
.dev.platform_data = &sharpsl_nand_platform_data,
};
static struct mtd_partition sharpsl_rom_parts[] = {
{
@ -648,6 +697,7 @@ static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
&spitzled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};
@ -671,6 +721,14 @@ static void __init common_init(void)
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
if (machine_is_spitz()) {
sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
} else if (machine_is_akita()) {
sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
} else if (machine_is_borzoi()) {
sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
}
PMCR = 0x00;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
@ -715,10 +773,29 @@ static struct i2c_board_info akita_i2c_board_info[] = {
},
};
static struct nand_bbt_descr sharpsl_akita_bbt = {
.options = 0,
.offs = 4,
.len = 1,
.pattern = scan_ff_pattern
};
static struct nand_ecclayout akita_oobinfo = {
.eccbytes = 24,
.eccpos = {
0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
.oobfree = {{0x08, 0x09}}
};
static void __init akita_init(void)
{
spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
/* We just pretend the second element of the array doesn't exist */
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;

1
arch/arm/mach-realview/platsmp.c
View File

@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>

1
arch/arm/mach-s3c2410/include/mach/gpio.h
View File

@ -14,6 +14,7 @@
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
/* some boards require extra gpio capacity to support external
* devices that need GPIO.

4
arch/arm/mach-s3c2410/include/mach/irqs.h
View File

@ -12,10 +12,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
#ifndef __ASM_ARM_IRQ_H
#error "Do not include this directly, instead #include <asm/irq.h>"
#endif
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
* and we don't end up having to do horrible things to the

2
arch/arm/mach-s3c2440/mach-at2440evb.c
View File

@ -47,7 +47,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <asm/plat-s3c24xx/mci.h>
#include <plat/mci.h>
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */

4
arch/arm/mach-s3c6400/include/mach/irqs.h
View File

@ -11,10 +11,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
#ifndef __ASM_ARM_IRQ_H
#error "Do not include this directly, instead #include <asm/irq.h>"
#endif
#include <plat/irqs.h>
#endif /* __ASM_ARCH_IRQ_H */

28
arch/arm/mm/dma-mapping.c
View File

@ -71,7 +71,7 @@ static DEFINE_SPINLOCK(consistent_lock);
* the amount of RAM found at boot time.) I would imagine that get_vm_area()
* would have to initialise this each time prior to calling vm_region_alloc().
*/
struct vm_region {
struct arm_vm_region {
struct list_head vm_list;
unsigned long vm_start;
unsigned long vm_end;
@ -79,20 +79,20 @@ struct vm_region {
int vm_active;
};
static struct vm_region consistent_head = {
static struct arm_vm_region consistent_head = {
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
.vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
static struct vm_region *
vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
static struct arm_vm_region *
arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
struct vm_region *c, *new;
struct arm_vm_region *c, *new;
new = kmalloc(sizeof(struct vm_region), gfp);
new = kmalloc(sizeof(struct arm_vm_region), gfp);
if (!new)
goto out;
@ -127,9 +127,9 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
return NULL;
}
static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
{
struct vm_region *c;
struct arm_vm_region *c;
list_for_each_entry(c, &head->vm_list, vm_list) {
if (c->vm_active && c->vm_start == addr)
@ -149,7 +149,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
pgprot_t prot)
{
struct page *page;
struct vm_region *c;
struct arm_vm_region *c;
unsigned long order;
u64 mask = ISA_DMA_THRESHOLD, limit;
@ -214,7 +214,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
/*
* Allocate a virtual address in the consistent mapping region.
*/
c = vm_region_alloc(&consistent_head, size,
c = arm_vm_region_alloc(&consistent_head, size,
gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
if (c) {
pte_t *pte;
@ -311,13 +311,13 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size)
{
unsigned long flags, user_size, kern_size;
struct vm_region *c;
struct arm_vm_region *c;
int ret = -ENXIO;
user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
spin_lock_irqsave(&consistent_lock, flags);
c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
spin_unlock_irqrestore(&consistent_lock, flags);
if (c) {
@ -359,7 +359,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
*/
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
{
struct vm_region *c;
struct arm_vm_region *c;
unsigned long flags, addr;
pte_t *ptep;
int idx;
@ -378,7 +378,7 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
size = PAGE_ALIGN(size);
spin_lock_irqsave(&consistent_lock, flags);
c = vm_region_find(&consistent_head, (unsigned long)cpu_addr);
c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
if (!c)
goto no_area;

23
arch/arm/plat-mxc/include/mach/usb.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_MXC_USB
#define __ASM_ARCH_MXC_USB
struct imxusb_platform_data {
int (*init)(struct device *);
int (*exit)(struct device *);
};
#endif /* __ASM_ARCH_MXC_USB */

1
arch/arm/plat-omap/i2c.c
View File

@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#define OMAP_I2C_SIZE 0x3f

Some files were not shown because too many files have changed in this diff Show More