renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code

pinctrl: qcom: pmic-gpio/mpp: of_irq_count() == npins

Browse Source 
The number of interrupts is always equal to the number of pins
provided by the PMIC gpio and MPP hardware blocks. Count the
number of irqs to figure out the number of pins instead of adding
more compatible strings or doing math on the reg property. This
should make the code more generic and ease the number of changes
we have to make to the driver for each new pmic revision.

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Björn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Stephen Boyd 2015-11-18 11:33:17 -08:00 committed by Linus Walleij
parent beee39099b
commit ab4256cfea
4 changed files with 32 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
View File

@ -14,6 +14,7 @@
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
@ -693,16 +694,15 @@ static int pmic_gpio_probe(struct platform_device *pdev)
struct pmic_gpio_pad *pad, *pads;
struct pmic_gpio_state *state;
int ret, npins, i;
u32 res[2];
u32 reg;
ret = of_property_read_u32_array(dev->of_node, "reg", res, 2);
ret = of_property_read_u32(dev->of_node, "reg", &reg);
if (ret < 0) {
dev_err(dev, "missing base address and/or range");
dev_err(dev, "missing base address");
return ret;
}
npins = res[1] / PMIC_GPIO_ADDRESS_RANGE;
npins = of_irq_count(dev->of_node);
if (!npins)
return -EINVAL;
@ -752,7 +752,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
if (pad->irq < 0)
return pad->irq;
pad->base = res[0] + i * PMIC_GPIO_ADDRESS_RANGE;
pad->base = reg + i * PMIC_GPIO_ADDRESS_RANGE;
ret = pmic_gpio_populate(state, pad);
if (ret < 0)

11
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
View File

@ -14,6 +14,7 @@
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
@ -795,15 +796,15 @@ static int pmic_mpp_probe(struct platform_device *pdev)
struct pmic_mpp_pad *pad, *pads;
struct pmic_mpp_state *state;
int ret, npins, i;
u32 res[2];
u32 reg;
ret = of_property_read_u32_array(dev->of_node, "reg", res, 2);
ret = of_property_read_u32(dev->of_node, "reg", &reg);
if (ret < 0) {
dev_err(dev, "missing base address and/or range");
dev_err(dev, "missing base address");
return ret;
}
npins = res[1] / PMIC_MPP_ADDRESS_RANGE;
npins = of_irq_count(dev->of_node);
if (!npins)
return -EINVAL;
@ -854,7 +855,7 @@ static int pmic_mpp_probe(struct platform_device *pdev)
if (pad->irq < 0)
return pad->irq;
pad->base = res[0] + i * PMIC_MPP_ADDRESS_RANGE;
pad->base = reg + i * PMIC_MPP_ADDRESS_RANGE;
ret = pmic_mpp_populate(state, pad);
if (ret < 0)

16
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
View File

@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@ -650,11 +651,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_gpio *pctrl,
}
static const struct of_device_id pm8xxx_gpio_of_match[] = {
{ .compatible = "qcom,pm8018-gpio", .data = (void *)6 },
{ .compatible = "qcom,pm8038-gpio", .data = (void *)12 },
{ .compatible = "qcom,pm8058-gpio", .data = (void *)40 },
{ .compatible = "qcom,pm8917-gpio", .data = (void *)38 },
{ .compatible = "qcom,pm8921-gpio", .data = (void *)44 },
{ .compatible = "qcom,pm8018-gpio" },
{ .compatible = "qcom,pm8038-gpio" },
{ .compatible = "qcom,pm8058-gpio" },
{ .compatible = "qcom,pm8917-gpio" },
{ .compatible = "qcom,pm8921-gpio" },
{ .compatible = "qcom,ssbi-gpio" },
{ },
};
MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match);
@ -672,7 +674,9 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
return -ENOMEM;
pctrl->dev = &pdev->dev;
pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev);
pctrl->npins = of_irq_count(pdev->dev.of_node);
if (!pctrl->npins)
return -EINVAL;
pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!pctrl->regmap) {

16
drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c
View File

@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
@ -741,11 +742,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl,
}
static const struct of_device_id pm8xxx_mpp_of_match[] = {
{ .compatible = "qcom,pm8018-mpp", .data = (void *)6 },
{ .compatible = "qcom,pm8038-mpp", .data = (void *)6 },
{ .compatible = "qcom,pm8917-mpp", .data = (void *)10 },
{ .compatible = "qcom,pm8821-mpp", .data = (void *)4 },
{ .compatible = "qcom,pm8921-mpp", .data = (void *)12 },
{ .compatible = "qcom,pm8018-mpp" },
{ .compatible = "qcom,pm8038-mpp" },
{ .compatible = "qcom,pm8917-mpp" },
{ .compatible = "qcom,pm8821-mpp" },
{ .compatible = "qcom,pm8921-mpp" },
{ .compatible = "qcom,ssbi-mpp" },
{ },
};
MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match);
@ -763,7 +765,9 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
return -ENOMEM;
pctrl->dev = &pdev->dev;
pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev);
pctrl->npins = of_irq_count(pdev->dev.of_node);
if (!pctrl->npins)
return -EINVAL;
pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!pctrl->regmap) {