diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c index 571d82f8008c..7df23dc28190 100644 --- a/drivers/net/defxx.c +++ b/drivers/net/defxx.c @@ -566,6 +566,7 @@ static int __devinit dfx_register(struct device *bdev) bp->base.mem = ioremap_nocache(bar_start, bar_len); if (!bp->base.mem) { printk(KERN_ERR "%s: Cannot map MMIO\n", print_name); + err = -ENOMEM; goto err_out_region; } } else { diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index cbc7febe9cdc..9ec35b7a8207 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1325,7 +1325,10 @@ e1000_sw_init(struct e1000_adapter *adapter) spin_lock_init(&adapter->tx_queue_lock); #endif - atomic_set(&adapter->irq_sem, 1); + /* Explicitly disable IRQ since the NIC can be in any state. */ + atomic_set(&adapter->irq_sem, 0); + e1000_irq_disable(adapter); + spin_lock_init(&adapter->stats_lock); set_bit(__E1000_DOWN, &adapter->flags); @@ -1431,6 +1434,10 @@ e1000_open(struct net_device *netdev) /* From here on the code is the same as e1000_up() */ clear_bit(__E1000_DOWN, &adapter->flags); +#ifdef CONFIG_E1000_NAPI + netif_poll_enable(netdev); +#endif + e1000_irq_enable(adapter); /* fire a link status change interrupt to start the watchdog */ diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 602872dbe15f..e85a933a4762 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0058" +#define DRV_VERSION "EHEA_0061" #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \ | NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index f6e0cb1ada1f..152bb2016a2c 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -428,7 +428,7 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev, } skb_copy_to_linear_data(skb, ((char*)cqe) + 64, cqe->num_bytes_transfered - 4); - ehea_fill_skb(dev, skb, cqe); + ehea_fill_skb(port->netdev, skb, cqe); } else if (rq == 2) { /* RQ2 */ skb = get_skb_by_index(skb_arr_rq2, skb_arr_rq2_len, cqe); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 832fd69a0e59..adfbe81693a6 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -364,7 +364,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* for SFP-module set SIGDET polarity to low */ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); ctrl |= PHY_M_FIB_SIGD_POL; - gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); } gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); @@ -658,7 +658,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) const u8 *addr = hw->dev[port]->dev_addr; sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); - sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE); + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); @@ -1432,7 +1432,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) tcpsum = offset << 16; /* sum start */ tcpsum |= offset + skb->csum_offset; /* sum write */ - ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; + ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (ip_hdr(skb)->protocol == IPPROTO_UDP) ctrl |= UDPTCP; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 5efb5afc45ba..b8c4a3b5eadf 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1149,7 +1149,7 @@ enum { PHY_M_IS_JABBER = 1<<0, /* Jabber */ PHY_M_DEF_MSK = PHY_M_IS_LSP_CHANGE | PHY_M_IS_LST_CHANGE - | PHY_M_IS_FIFO_ERROR, + | PHY_M_IS_DUP_CHANGE, PHY_M_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL, }; @@ -1732,28 +1732,6 @@ enum { /* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ enum { - GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ - GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ - GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ - GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ - GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ - GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ - GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ - GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ - GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ - GPC_ANEG_0 = 1<<19, /* ANEG[0] */ - GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ - GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ - GPC_ANEG_3 = 1<<16, /* ANEG[3] */ - GPC_ANEG_2 = 1<<15, /* ANEG[2] */ - GPC_ANEG_1 = 1<<14, /* ANEG[1] */ - GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ - GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ - GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ - GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ - GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ - GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ - /* Bits 7..2: reserved */ GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ GPC_RST_SET = 1<<0, /* Set GPHY Reset */ }; diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 246fac0e8001..3df3c60263d4 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -311,7 +311,7 @@ static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, local_info_t *local; struct ieee80211_hdr_4addr *hdr; u16 fc; - int hdr_len, res; + int prefix_len, postfix_len, hdr_len, res; iface = netdev_priv(skb->dev); local = iface->local; @@ -337,10 +337,13 @@ static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (skb == NULL) return NULL; - if ((skb_headroom(skb) < crypt->ops->extra_mpdu_prefix_len || - skb_tailroom(skb) < crypt->ops->extra_mpdu_postfix_len) && - pskb_expand_head(skb, crypt->ops->extra_mpdu_prefix_len, - crypt->ops->extra_mpdu_postfix_len, GFP_ATOMIC)) { + prefix_len = crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_msdu_prefix_len; + postfix_len = crypt->ops->extra_mpdu_postfix_len + + crypt->ops->extra_msdu_postfix_len; + if ((skb_headroom(skb) < prefix_len || + skb_tailroom(skb) < postfix_len) && + pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) { kfree_skb(skb); return NULL; } diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index dd070cccf324..f49eb068c7d0 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -378,9 +378,10 @@ islpci_eth_receive(islpci_private *priv) display_buffer((char *) skb->data, skb->len); #endif /* take care of monitor mode and spy monitoring. */ - if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) + if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) { + skb->dev = ndev; discard = islpci_monitor_rx(priv, &skb); - else { + } else { if (unlikely(skb->data[2 * ETH_ALEN] == 0)) { /* The packet has a rx_annex. Read it for spy monitoring, Then * remove it, while keeping the 2 leading MAC addr. diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 7ec6610841ba..17ad278696ed 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -140,7 +140,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv); if (!dev) { - IEEE80211_ERROR("Unable to network device.\n"); + IEEE80211_ERROR("Unable to allocate network device.\n"); goto failed; } ieee = netdev_priv(dev); diff --git a/net/ieee80211/softmac/ieee80211softmac_module.c b/net/ieee80211/softmac/ieee80211softmac_module.c index e9cdc6615ddc..c308756c2f9d 100644 --- a/net/ieee80211/softmac/ieee80211softmac_module.c +++ b/net/ieee80211/softmac/ieee80211softmac_module.c @@ -33,7 +33,10 @@ struct net_device *alloc_ieee80211softmac(int sizeof_priv) struct ieee80211softmac_device *softmac; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ieee80211softmac_device) + sizeof_priv); + dev = alloc_ieee80211(sizeof(*softmac) + sizeof_priv); + if (!dev) + return NULL; + softmac = ieee80211_priv(dev); softmac->dev = dev; softmac->ieee = netdev_priv(dev);