From a96d3b7593a3eefab62dd930e5c99201c3678ee4 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 9 Aug 2016 18:00:08 +0200 Subject: [PATCH] dm9000: Fix irq trigger type setup on non-dt platforms Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by: Sylwester Nawrocki Acked-by: Robert Jarzmik Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 1471e16ba719..f45385f5c6e5 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -1299,6 +1299,7 @@ static int dm9000_open(struct net_device *dev) { struct board_info *db = netdev_priv(dev); + unsigned int irq_flags = irq_get_trigger_type(dev->irq); if (netif_msg_ifup(db)) dev_dbg(db->dev, "enabling %s\n", dev->name); @@ -1306,9 +1307,11 @@ dm9000_open(struct net_device *dev) /* If there is no IRQ type specified, tell the user that this is a * problem */ - if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE) + if (irq_flags == IRQF_TRIGGER_NONE) dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); + irq_flags |= IRQF_SHARED; + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ mdelay(1); /* delay needs by DM9000B */ @@ -1316,8 +1319,7 @@ dm9000_open(struct net_device *dev) /* Initialize DM9000 board */ dm9000_init_dm9000(dev); - if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED, - dev->name, dev)) + if (request_irq(dev->irq, dm9000_interrupt, irq_flags, dev->name, dev)) return -EAGAIN; /* Now that we have an interrupt handler hooked up we can unmask * our interrupts