diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f6d6a4ad9e8a..e976d073f28d 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -36,6 +36,8 @@ struct arizona_ldo1 {
 
 	struct regulator_consumer_supply supply;
 	struct regulator_init_data init_data;
+
+	struct gpio_desc *ena_gpiod;
 };
 
 static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
@@ -253,12 +255,17 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
 		}
 	}
 
-	/* We assume that high output = regulator off */
-	config.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "wlf,ldoena",
-						   GPIOD_OUT_HIGH);
+	/* We assume that high output = regulator off
+	 * Don't use devm, since we need to get against the parent device
+	 * so clean up would happen at the wrong time
+	 */
+	config.ena_gpiod = gpiod_get_optional(parent_dev, "wlf,ldoena",
+					      GPIOD_OUT_LOW);
 	if (IS_ERR(config.ena_gpiod))
 		return PTR_ERR(config.ena_gpiod);
 
+	ldo1->ena_gpiod = config.ena_gpiod;
+
 	if (pdata->init_data)
 		config.init_data = pdata->init_data;
 	else
@@ -276,6 +283,9 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
 	of_node_put(config.of_node);
 
 	if (IS_ERR(ldo1->regulator)) {
+		if (config.ena_gpiod)
+			gpiod_put(config.ena_gpiod);
+
 		ret = PTR_ERR(ldo1->regulator);
 		dev_err(&pdev->dev, "Failed to register LDO1 supply: %d\n",
 			ret);
@@ -334,8 +344,19 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int arizona_ldo1_remove(struct platform_device *pdev)
+{
+	struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
+
+	if (ldo1->ena_gpiod)
+		gpiod_put(ldo1->ena_gpiod);
+
+	return 0;
+}
+
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
+	.remove = arizona_ldo1_remove,
 	.driver		= {
 		.name	= "arizona-ldo1",
 	},