renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code

tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables

Browse Source 
The variables of tx_wm and rx_wm were set to the same define value in
all cases, never updated, and the define was sometimes used
interchangably. Remove the variables/function and use the fixed value.

Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ryan Case 2019-01-07 17:58:36 -08:00 committed by Greg Kroah-Hartman
parent 9e06d55f7b
commit a85fb9ce1f
1 changed files with 4 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
drivers/tty/serial/qcom_geni_serial.c
View File

@ -89,7 +89,7 @@
#define DEF_FIFO_DEPTH_WORDS 16
#define DEF_TX_WM 2
#define DEF_FIFO_WIDTH_BITS 32
#define UART_CONSOLE_RX_WM 2
#define UART_RX_WM 2
#define MAX_LOOPBACK_CFG 3
#ifdef CONFIG_CONSOLE_POLL
@ -105,9 +105,6 @@ struct qcom_geni_serial_port {
u32 tx_fifo_depth;
u32 tx_fifo_width;
u32 rx_fifo_depth;
u32 tx_wm;
u32 rx_wm;
u32 rx_rfr;
enum geni_se_xfer_mode xfer_mode;
bool setup;
int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
@ -363,9 +360,7 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
static void qcom_geni_serial_poll_put_char(struct uart_port *uport,
unsigned char c)
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
writel(port->tx_wm, uport->membase + SE_GENI_TX_WATERMARK_REG);
writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
qcom_geni_serial_setup_tx(uport, 1);
WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_TX_FIFO_WATERMARK_EN, true));
@ -574,7 +569,7 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport)
irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
writel(port->tx_wm, uport->membase +
writel(DEF_TX_WM, uport->membase +
SE_GENI_TX_WATERMARK_REG);
writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
}
@ -846,17 +841,6 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
}
static void set_rfr_wm(struct qcom_geni_serial_port *port)
{
/*
* Set RFR (Flow off) to FIFO_DEPTH - 2.
* RX WM level at 10% RX_FIFO_DEPTH.
* TX WM level at 10% TX_FIFO_DEPTH.
*/
port->rx_rfr = port->rx_fifo_depth - 2;
port->rx_wm = UART_CONSOLE_RX_WM;
port->tx_wm = DEF_TX_WM;
}
static void qcom_geni_serial_shutdown(struct uart_port *uport)
{
@ -897,7 +881,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
get_tx_fifo_size(port);
set_rfr_wm(port);
writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
/*
* Make an unconditional cancel on the main sequencer to reset
@ -910,7 +893,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
false, true, false);
geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw,
false, false, true);
geni_se_init(&port->se, port->rx_wm, port->rx_rfr);
geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
geni_se_select_mode(&port->se, port->xfer_mode);
if (!uart_console(uport)) {
port->rx_fifo = devm_kcalloc(uport->dev,