renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 10:44:14 +08:00
Code

DaVinci GPIO driver updates

Browse Source 
---------------------------
 
 This pull request contains updates
 to DaVinci GPIO driver and the
 resultant platform code changes. The
 updates include DT-conversion and
 changes to make the driver cross-platform
 ready.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJSuycQAAoJEGFBu2jqvgRNIdMP/jE7LW16dF2dGq79Gy26GWcM
 dNSSXzwEm2q5vT49H8ADzkbnsI2PlFpcH0mwn5BpPuVRl+RKHfNEZxwuAthqKduu
 BIKVGBkNECrliIIUecCwBjAYpQknynvLAGHRhYmibEnZCH45kZ8g7DLJMeBL4Huz
 smDkz2yWWoHjnIaCk/kIbQfeETKSx5GP+OwnnrU/4HPpndxqZ6KU/MXb8ZeMiLfa
 piMl10o/YIJcfZcKBbkI1I2PuHNgNAzjVnMMsCVF+B5vgLiYmj9P+6l1Sfau6y8A
 kimW34q4HNuQ07hkDAIALz0AH7y8bL9SoKprT4NX10DvGHwl21a/Ji5QS8N49krM
 +HAiSIUdsFwie5M8286owGAJ/TBFReStWY1a/sIghx9idU6ejuM/Pj8/bfTS+Vu+
 8wyos8hTYVBDOEwoRzw48S5x93U5W6dsjOacOJ+blHBtPmADlWSNG8HwzSfWxHEI
 PMaVhu2EKtgD1ZFgU5Zlt+f5h3E4ezAIEpiPIhdLcg/3hqNSpFRmNV3nJsx+KwE+
 JyZXcHkyq42i6wL5Sdf6W/Dpd5knPyqP3BBWBTeg+BDLnH8F2+Vtws95I4dlit0T
 RtQ9Ms6QmznPTs9fMaviURiVIUBK6XIG5UHDU10bhL0h8vOR/hXAVrAB+wZntvPU
 uIXAapK/78LTBX92opDz
 =DxLt
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers

From Sekhar Nori:
DaVinci GPIO driver updates
---------------------------

This pull request contains updates to DaVinci GPIO driver and the
resultant platform code changes. The updates include DT-conversion and
changes to make the driver cross-platform ready.

* tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2014-01-02 11:45:27 -08:00
commit a7dedb4fea
816 changed files with 7782 additions and 4059 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
CREDITS
View File

@ -655,6 +655,11 @@ S: Stanford University
S: Stanford, California 94305
S: USA
N: Carlos Chinea
E: carlos.chinea@nokia.com
E: cch.devel@gmail.com
D: Author of HSI Subsystem
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker

8
Documentation/DocBook/media/v4l/vidioc-expbuf.xml
View File

@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
Currently only O_CLOEXEC is supported. All other fields must be set to zero.
Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
O_CLOEXEC </constant> is supported, refer to the manual of open() for more
details.</entry>
O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
of open() for more details.</entry>
</row>
<row>
<entry>__s32</entry>

6
Documentation/assoc_array.txt
View File

@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
(4) Diff the index keys of two objects.
int (*diff_objects)(const void *a, const void *b);
int (*diff_objects)(const void *object, const void *index_key);
Return the bit position at which the index keys of two objects differ or
-1 if they are the same.
Return the bit position at which the index key of the specified object
differs from the given index key or -1 if they are the same.
(5) Free an object.

10
Documentation/device-mapper/cache.txt
View File

@ -266,10 +266,12 @@ E.g.
Invalidation is removing an entry from the cache without writing it
back. Cache blocks can be invalidated via the invalidate_cblocks
message, which takes an arbitrary number of cblock ranges. Each cblock
must be expressed as a decimal value, in the future a variant message
that takes cblock ranges expressed in hexidecimal may be needed to
better support efficient invalidation of larger caches. The cache must
be in passthrough mode when invalidate_cblocks is used.
range's end value is "one past the end", meaning 5-10 expresses a range
of values from 5 to 9. Each cblock must be expressed as a decimal
value, in the future a variant message that takes cblock ranges
expressed in hexidecimal may be needed to better support efficient
invalidation of larger caches. The cache must be in passthrough mode
when invalidate_cblocks is used.
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*

8
Documentation/devicetree/bindings/arm/omap/mpu.txt
View File

@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
- For an OMAP5 SMP system:
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu"
};
- For an OMAP4 SMP system:
mpu {

1
Documentation/devicetree/bindings/arm/pmu.txt
View File

@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
"arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"

2
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
View File

@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;

2
Documentation/devicetree/bindings/clock/exynos4-clock.txt
View File

@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.

2
Documentation/devicetree/bindings/clock/exynos5250-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped

2
Documentation/devicetree/bindings/clock/exynos5420-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
- comptible: should be one of the following.
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped

2
Documentation/devicetree/bindings/clock/exynos5440-clock.txt
View File

@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
- comptible: should be "samsung,exynos5440-clock".
- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.

66
Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
View File

@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
See bindings/gpio/gpio.txt for details of how to specify GPIO
information for devices.
The GPIO module usually is connected to the SoC's internal interrupt
controller, see bindings/interrupt-controller/interrupts.txt (the
interrupt client nodes section) for details how to specify this GPIO
module's interrupt.
The GPIO module may serve as another interrupt controller (cascaded to
the SoC's internal interrupt controller). See the interrupt controller
nodes section in bindings/interrupt-controller/interrupts.txt for
details.
Required properties:
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
for 83xx, "fsl,mpc8572-gpio" for 85xx, or
"fsl,mpc8610-gpio" for 86xx.
- #gpio-cells: Should be two. The first cell is the pin number
and the second cell is used to specify optional
parameters (currently unused).
- interrupt-parent: Phandle for the interrupt controller that
services interrupts for this device.
- interrupts: Interrupt mapping for GPIO IRQ.
- gpio-controller: Marks the port as GPIO controller.
Optional properties:
- interrupt-controller: Empty boolean property which marks the GPIO
module as an IRQ controller.
- #interrupt-cells: Should be two. Defines the number of integer
cells required to specify an interrupt within
this interrupt controller. The first cell
defines the pin number, the second cell
defines additional flags (trigger type,
trigger polarity). Note that the available
set of trigger conditions supported by the
GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
interrupts = <74 0x8>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
interrupts = <75 0x8>;
gpio-controller;
};
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
interrupts = <4 3>;
};

41
Documentation/devicetree/bindings/gpio/gpio-davinci.txt Normal file
View File

@ -0,0 +1,41 @@
Davinci GPIO controller bindings
Required Properties:
- compatible: should be "ti,dm6441-gpio"
- reg: Physical base address of the controller and the size of memory mapped
registers.
- gpio-controller : Marks the device node as a gpio controller.
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
supported at a time.
- ti,ngpio: The number of GPIO pins supported.
- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
line to processor.
The GPIO controller also acts as an interrupt controller. It uses the default
two cells specifier as described in Documentation/devicetree/bindings/
interrupt-controller/interrupts.txt.
Example:
gpio: gpio@1e26000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
reg = <0x226000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
50 IRQ_TYPE_EDGE_BOTH>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
interrupt-controller;
#interrupt-cells = <2>;
};

54
Documentation/devicetree/bindings/mmc/ti-omap.txt Normal file
View File

@ -0,0 +1,54 @@
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};
* TI MMC host controller for OMAP1 and 2420
The MMC Host Controller on TI OMAP1 and 2420 family provides
an interface for MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties described
by mmc.txt and the properties used by the omap mmc driver.
Note that this driver will not work with omap2430 or later omaps,
please see the omap hsmmc driver for the current omaps.
Required properties:
- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
instance starting 1
Examples:
msdi1: mmc@4809c000 {
compatible = "ti,omap2420-mmc";
ti,hwmods = "msdi1";
reg = <0x4809c000 0x80>;
interrupts = <83>;
dmas = <&sdma 61 &sdma 62>;
dma-names = "tx", "rx";
};

2
Documentation/devicetree/bindings/net/davinci_emac.txt
View File

@ -4,7 +4,7 @@ This file provides information, what the device node
for the davinci_emac interface contains.
Required properties:
- compatible: "ti,davinci-dm6467-emac";
- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register

2
Documentation/devicetree/bindings/net/fsl-fec.txt
View File

@ -15,6 +15,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
- phy-supply: regulator that powers the Ethernet PHY.
Example:
@ -25,4 +26,5 @@ ethernet@83fec000 {
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
phy-supply = <&reg_fec_supply>;
};

4
Documentation/devicetree/bindings/net/smsc-lan91c111.txt
View File

@ -8,3 +8,7 @@ Required properties:
Optional properties:
- phy-device : phandle to Ethernet phy
- local-mac-address : Ethernet mac address to use
- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
are supported on the device. Valid value for SMSC LAN91c111 are
1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
16-bit access only.

5
Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
View File

@ -1,5 +0,0 @@
NVIDIA Tegra 2 SPI device
Required properties:
- compatible : should be "nvidia,tegra20-spi".
- gpios : should specify GPIOs used for chipselect.

2
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -32,6 +32,7 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
@ -39,6 +40,7 @@ idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
isl Intersil
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.

14
Documentation/gpio/00-INDEX Normal file
View File

@ -0,0 +1,14 @@
00-INDEX
- This file
gpio.txt
- Introduction to GPIOs and their kernel interfaces
consumer.txt
- How to obtain and use GPIOs in a driver
driver.txt
- How to write a GPIO driver
board.txt
- How to assign GPIOs to a consumer device and a function
sysfs.txt
- Information about the GPIO sysfs interface
gpio-legacy.txt
- Historical documentation of the deprecated GPIO integer interface

18
Documentation/mic/mpssd/mpssd.c
View File

@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
int i;
void *dp = get_dp(mic, type);
for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
i += mic_total_desc_size(d)) {
d = dp + i;
@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr0->va, vr0->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
vr0->info->magic, MIC_MAGIC + type);
assert(vr0->info->magic == MIC_MAGIC + type);
le32toh(vr0->info->magic), MIC_MAGIC + type);
assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
if (vr1) {
vr1->va = (struct mic_vring *)
&va[MIC_DEVICE_PAGE_END + vr_size];
@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr1->va, vr1->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
vr1->info->magic, MIC_MAGIC + type + 1);
assert(vr1->info->magic == MIC_MAGIC + type + 1);
le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
}
done:
return va;
@ -520,7 +520,7 @@ static void *
virtio_net(void *arg)
{
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
struct iovec vnet_iov[2][2] = {
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@ -1412,6 +1412,12 @@ mic_config(void *arg)
}
do {
ret = lseek(fd, 0, SEEK_SET);
if (ret < 0) {
mpsslog("%s: Failed to seek to file start '%s': %s\n",
mic->name, pathname, strerror(errno));
goto close_error1;
}
ret = read(fd, value, sizeof(value));
if (ret < 0) {
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

10
Documentation/networking/packet_mmap.txt
View File

@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
[shutdown] close() --------> destruction of the transmission socket and
deallocation of all associated resources.
Socket creation and destruction is also straight forward, and is done
the same way as in capturing described in the previous paragraph:
int fd = socket(PF_PACKET, mode, 0);
The protocol can optionally be 0 in case we only want to transmit
via this socket, which avoids an expensive call to packet_rcv().
In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
Binding the socket to your network interface is mandatory (with zero copy) to
know the header size of frames used in the circular buffer.

77
MAINTAINERS
View File

@ -893,19 +893,14 @@ F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-imx/
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
F: arch/arm/mach-imx/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
@ -1934,7 +1929,8 @@ S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <chris.mason@fusionio.com>
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
@ -2137,7 +2133,8 @@ S: Maintained
F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
M: Peter Chen <Peter.Chen@freescale.com>
T: git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/
@ -4043,12 +4040,26 @@ W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
F: fs/hpfs/
HSI SUBSYSTEM
M: Sebastian Reichel <sre@debian.org>
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-hsi
F: drivers/hsi/
F: include/linux/hsi/
F: include/uapi/linux/hsi/
HSO 3G MODEM DRIVER
M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
HSR NETWORK PROTOCOL
M: Arvid Brodin <arvid.brodin@alten.se>
L: netdev@vger.kernel.org
S: Maintained
F: net/hsr/
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
@ -4455,10 +4466,8 @@ M: Bruce Allan <bruce.w.allan@intel.com>
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
M: Tushar Dave <tushar.n.dave@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://www.intel.com/support/feedback.htm
W: http://e1000.sourceforge.net/
@ -5261,7 +5270,7 @@ S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
F: include/linux/lockdep.h
F: kernel/lockdep*
F: kernel/locking/
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
@ -5973,10 +5982,10 @@ F: drivers/nfc/
F: include/linux/platform_data/pn544.h
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
M: Trond Myklebust <trond.myklebust@primarydata.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
S: Maintained
F: fs/lockd/
F: fs/nfs/
@ -6243,8 +6252,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
@ -6454,19 +6463,52 @@ F: drivers/pci/
F: include/linux/pci*
F: arch/x86/pci/
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*imx6*
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
M: Jason Cooper <jason@lakedaemon.net>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*mvebu*
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org
L: linux-sh@vger.kernel.org
S: Maintained
F: drivers/pci/host/*rcar*
PCI DRIVER FOR SAMSUNG EXYNOS
M: Jingoo Han <jg1.han@samsung.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/pci-exynos.c
PCI DRIVER FOR SYNOPSIS DESIGNWARE
M: Mohit Kumar <mohit.kumar@st.com>
M: Jingoo Han <jg1.han@samsung.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*designware*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
@ -7385,7 +7427,6 @@ S: Maintained
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
F: kernel/wait.c
F: include/linux/wait.h
SCORE ARCHITECTURE

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 13
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*

1
arch/arc/Kconfig
View File

@ -8,6 +8,7 @@
config ARC
def_bool y
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""

5
arch/arc/include/uapi/asm/unistd.h
View File

@ -8,6 +8,9 @@
/******** no-legacy-syscalls-ABI *******/
#ifndef _UAPI_ASM_ARC_UNISTD_H
#define _UAPI_ASM_ARC_UNISTD_H
#define __ARCH_WANT_SYS_EXECVE
#define __ARCH_WANT_SYS_CLONE
#define __ARCH_WANT_SYS_VFORK
@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
#define __NR_sysfs (__NR_arch_specific_syscall + 3)
__SYSCALL(__NR_sysfs, sys_sysfs)
#endif

4
arch/arc/kernel/perf_event.c
View File

@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
cache_result = (config >> 16) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];

79
arch/arm/boot/dts/am335x-base0033.dts
View File

@ -13,4 +13,83 @@
/ {
model = "IGEP COM AM335x on AQUILA Expansion";
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
hdmi {
compatible = "ti,tilcdc,slave";
i2c = <&i2c0>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_pins>;
pinctrl-1 = <&nxp_hdmi_off_pins>;
status = "okay";
};
leds_base {
pinctrl-names = "default";
pinctrl-0 = <&leds_base_pins>;
compatible = "gpio-leds";
led@0 {
label = "base:red:user";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
default-state = "off";
};
led@1 {
label = "base:green:user";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
default-state = "off";
};
};
};
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
>;
};
};
&lcdc {
status = "okay";
};
&i2c0 {
eeprom: eeprom@50 {
compatible = "at,24c256";
reg = <0x50>;
};
};

29
arch/arm/boot/dts/am335x-igep0033.dtsi
View File

@ -199,6 +199,35 @@
pinctrl-0 = <&uart0_pins>;
};
&usb {
status = "okay";
control@44e10000 {
status = "okay";
};
usb-phy@47401300 {
status = "okay";
};
usb-phy@47401b00 {
status = "okay";
};
usb@47401000 {
status = "okay";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
dma-controller@07402000 {
status = "okay";
};
};
#include "tps65910.dtsi"
&tps {

6
arch/arm/boot/dts/am3517-evm.dts
View File

@ -7,11 +7,11 @@
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "am3517.dtsi"
/ {
model = "TI AM3517 EVM (AM3517/05)";
compatible = "ti,am3517-evm", "ti,omap3";
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
memory {
device_type = "memory";

63
arch/arm/boot/dts/am3517.dtsi Normal file
View File

@ -0,0 +1,63 @@
/*
* Device Tree Source for am3517 SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include "omap3.dtsi"
/ {
aliases {
serial3 = &uart4;
};
ocp {
am35x_otg_hs: am35x_otg_hs@5c040000 {
compatible = "ti,omap3-musb";
ti,hwmods = "am35x_otg_hs";
status = "disabled";
reg = <0x5c040000 0x1000>;
interrupts = <71>;
interrupt-names = "mc";
};
davinci_emac: ethernet@0x5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
reg = <0x5c000000 0x30000>;
interrupts = <67 68 69 70>;
ti,davinci-ctrl-reg-offset = <0x10000>;
ti,davinci-ctrl-mod-reg-offset = <0>;
ti,davinci-ctrl-ram-offset = <0x20000>;
ti,davinci-ctrl-ram-size = <0x2000>;
ti,davinci-rmii-en = /bits/ 8 <1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
davinci_mdio: ethernet@0x5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
reg = <0x5c030000 0x1000>;
bus_freq = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
uart4: serial@4809e000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
status = "disabled";
reg = <0x4809e000 0x400>;
interrupts = <84>;
dmas = <&sdma 55 &sdma 54>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
};
};

28
arch/arm/boot/dts/armada-370-db.dts
View File

@ -99,22 +99,22 @@
spi-max-frequency = <50000000>;
};
};
};
pcie-controller {
pcie-controller {
status = "okay";
/*
* The two PCIe units are accessible through
* both standard PCIe slots and mini-PCIe
* slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
/*
* The two PCIe units are accessible through
* both standard PCIe slots and mini-PCIe
* slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};

2
arch/arm/boot/dts/armada-370-xp.dtsi
View File

@ -118,7 +118,7 @@
coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
reg = <0x20200 0xb0>, <0x21810 0x1c>;
reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
serial@12000 {

24
arch/arm/boot/dts/armada-xp-mv78230.dtsi
View File

@ -47,7 +47,7 @@
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
* x1 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@ -62,10 +62,10 @@
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@ -74,8 +74,8 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
@ -145,20 +145,20 @@
status = "disabled";
};
pcie@9,0 {
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
clocks = <&gateclk 9>;
status = "disabled";
};
};

111
arch/arm/boot/dts/armada-xp-mv78260.dtsi
View File

@ -48,7 +48,7 @@
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
* x4 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
@ -68,7 +68,9 @@
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@ -77,10 +79,18 @@
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
@ -106,8 +116,8 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@ -150,6 +160,74 @@
status = "disabled";
};
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
};
pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
};
pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
};
pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
@ -166,23 +244,6 @@
clocks = <&gateclk 26>;
status = "disabled";
};
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
status = "disabled";
};
};
internal-regs {

4
arch/arm/boot/dts/at91sam9x5_usart3.dtsi
View File

@ -11,6 +11,10 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
serial4 = &usart3;
};
ahb {
apb {
pinctrl@fffff400 {

4
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
View File

@ -44,8 +44,8 @@
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vmmc-supply = <&vddvario>;
vmmc_aux-supply = <&vdd33a>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};

7
arch/arm/boot/dts/omap3-beagle-xm.dts
View File

@ -215,3 +215,10 @@
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
&vaux2 {
regulator-name = "usb_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};

21
arch/arm/boot/dts/omap3-beagle.dts
View File

@ -61,6 +61,14 @@
vcc-supply = <&hsusb2_power>;
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "omap3beagle";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
gpio_keys {
compatible = "gpio-keys";
@ -120,6 +128,12 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
@ -178,3 +192,10 @@
mode = <3>;
power = <50>;
};
&vaux2 {
regulator-name = "vdd_ehci";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};

85
arch/arm/boot/dts/omap3-igep.dtsi
View File

@ -1,5 +1,5 @@
/*
* Device Tree Source for IGEP Technology devices
* Common device tree for IGEP boards based on AM/DM37x
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap36xx.dtsi"
/ {
memory {
@ -24,6 +24,25 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
vdd33: regulator-vdd33 {
compatible = "regulator-fixed";
regulator-name = "vdd33";
regulator-always-on;
};
lbee1usjyc_vmmc: lbee1usjyc_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&lbee1usjyc_pins>;
compatible = "regulator-fixed";
regulator-name = "regulator-lbee1usjyc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
startup-delay-us = <10000>;
enable-active-high;
vin-supply = <&vdd33>;
};
};
&omap3_pmx_core {
@ -48,6 +67,15 @@
>;
};
/* WiFi/BT combo */
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
pinctrl-single,pins = <
0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
@ -65,10 +93,17 @@
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
@ -78,10 +113,33 @@
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins { };
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
@ -101,9 +159,16 @@
#include "twl4030_omap3.dtsi"
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
@ -114,11 +179,15 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
bus-width = <4>;
};
&mmc2 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&lbee1usjyc_vmmc>;
bus-width = <4>;
non-removable;
};
&mmc3 {

50
arch/arm/boot/dts/omap3-igep0020.dts
View File

@ -1,5 +1,5 @@
/*
* Device Tree Source for IGEPv2 board
* Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@ -13,7 +13,7 @@
#include "omap-gpmc-smsc911x.dtsi"
/ {
model = "IGEPv2";
model = "IGEPv2 (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
@ -67,6 +67,8 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
&tfp410_pins
&dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
@ -85,6 +87,45 @@
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
tfp410_pins: tfp410_dvi_pins {
pinctrl-single,pins = <
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_pins: pinmux_dss_dvi_pins {
pinctrl-single,pins = <
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
};
&leds_pins {
@ -174,3 +215,8 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
&vpll2 {
/* Needed for DSS */
regulator-name = "vdds_dsi";
};

4
arch/arm/boot/dts/omap3-igep0030.dts
View File

@ -1,5 +1,5 @@
/*
* Device Tree Source for IGEP COM Module
* Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@ -12,7 +12,7 @@
#include "omap3-igep.dtsi"
/ {
model = "IGEP COM Module";
model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {

25
arch/arm/boot/dts/omap3-n900.dts
View File

@ -9,7 +9,7 @@
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap34xx-hs.dtsi"
/ {
model = "Nokia N900";
@ -125,6 +125,21 @@
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
>;
};
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
@ -358,8 +373,14 @@
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vaux3>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
non-removable;
};
&mmc3 {

2
arch/arm/boot/dts/omap3-n950-n9.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
#include "omap36xx.dtsi"
#include "omap36xx-hs.dtsi"
/ {
cpus {

42
arch/arm/boot/dts/omap3.dtsi
View File

@ -82,6 +82,13 @@
ranges;
ti,hwmods = "l3_main";
aes: aes@480c5000 {
compatible = "ti,omap3-aes";
ti,hwmods = "aes";
reg = <0x480c5000 0x50>;
interrupts = <0>;
};
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
@ -260,6 +267,13 @@
ti,hwmods = "i2c3";
};
mailbox: mailbox@48094000 {
compatible = "ti,omap3-mailbox";
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
};
mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
reg = <0x48098000 0x100>;
@ -357,6 +371,13 @@
dma-names = "tx", "rx";
};
mmu_isp: mmu@480bd400 {
compatible = "ti,omap3-mmu-isp";
ti,hwmods = "mmu_isp";
reg = <0x480bd400 0x80>;
interrupts = <8>;
};
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
reg = <0x48314000 0x80>;
@ -442,6 +463,27 @@
dma-names = "tx", "rx";
};
sham: sham@480c3000 {
compatible = "ti,omap3-sham";
ti,hwmods = "sham";
reg = <0x480c3000 0x64>;
interrupts = <49>;
};
smartreflex_core: smartreflex@480cb000 {
compatible = "ti,omap3-smartreflex-core";
ti,hwmods = "smartreflex_core";
reg = <0x480cb000 0x400>;
interrupts = <19>;
};
smartreflex_mpu_iva: smartreflex@480c9000 {
compatible = "ti,omap3-smartreflex-iva";
ti,hwmods = "smartreflex_mpu_iva";
reg = <0x480c9000 0x400>;
interrupts = <18>;
};
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;

16
arch/arm/boot/dts/omap34xx-hs.dtsi Normal file
View File

@ -0,0 +1,16 @@
/* Disabled modules for secure omaps */
#include "omap34xx.dtsi"
/* Secure omaps have some devices inaccessible depending on the firmware */
&aes {
status = "disabled";
};
&sham {
status = "disabled";
};
&timer12 {
status = "disabled";
};

16
arch/arm/boot/dts/omap36xx-hs.dtsi Normal file
View File

@ -0,0 +1,16 @@
/* Disabled modules for secure omaps */
#include "omap36xx.dtsi"
/* Secure omaps have some devices inaccessible depending on the firmware */
&aes {
status = "disabled";
};
&sham {
status = "disabled";
};
&timer12 {
status = "disabled";
};

20
arch/arm/boot/dts/omap4-panda-common.dtsi
View File

@ -246,15 +246,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
};
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@ -274,7 +265,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
@ -284,6 +275,15 @@
};
};
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;

12
arch/arm/boot/dts/omap4-sdp.dts
View File

@ -300,12 +300,12 @@
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};

7
arch/arm/boot/dts/socfpga.dtsi
View File

@ -245,14 +245,14 @@
mpu_periph_clk: mpu_periph_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <4>;
};
mpu_l2_ram_clk: mpu_l2_ram_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <2>;
};
@ -266,8 +266,9 @@
l3_main_clk: l3_main_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
compatible = "altr,socfpga-perip-clk";
clocks = <&mainclk>;
fixed-divider = <1>;
};
l3_mp_clk: l3_mp_clk {

27
arch/arm/boot/dts/sun6i-a31.dtsi
View File

@ -193,7 +193,10 @@
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
interrupts = <0 11 4>,
<0 15 4>,
<0 16 4>,
<0 17 4>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
@ -212,11 +215,11 @@
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <0 18 1>,
<0 19 1>,
<0 20 1>,
<0 21 1>,
<0 22 1>;
interrupts = <0 18 4>,
<0 19 4>,
<0 20 4>,
<0 21 4>,
<0 22 4>;
clocks = <&osc24M>;
};
@ -228,7 +231,7 @@
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <0 0 1>;
interrupts = <0 0 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
@ -238,7 +241,7 @@
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <0 1 1>;
interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
@ -248,7 +251,7 @@
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <0 2 1>;
interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
@ -258,7 +261,7 @@
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <0 3 1>;
interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
@ -268,7 +271,7 @@
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <0 4 1>;
interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
@ -278,7 +281,7 @@
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <0 5 1>;
interrupts = <0 5 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;

42
arch/arm/boot/dts/sun7i-a20.dtsi
View File

@ -170,7 +170,7 @@
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <0 55 1>;
interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
@ -186,7 +186,7 @@
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <0 28 1>;
interrupts = <0 28 4>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
@ -251,12 +251,12 @@
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
interrupts = <0 22 1>,
<0 23 1>,
<0 24 1>,
<0 25 1>,
<0 67 1>,
<0 68 1>;
interrupts = <0 22 4>,
<0 23 4>,
<0 24 4>,
<0 25 4>,
<0 67 4>,
<0 68 4>;
clocks = <&osc24M>;
};
@ -273,7 +273,7 @@
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <0 1 1>;
interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
@ -283,7 +283,7 @@
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <0 2 1>;
interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
@ -293,7 +293,7 @@
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <0 3 1>;
interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
@ -303,7 +303,7 @@
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <0 4 1>;
interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
@ -313,7 +313,7 @@
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <0 17 1>;
interrupts = <0 17 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
@ -323,7 +323,7 @@
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <0 18 1>;
interrupts = <0 18 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
@ -333,7 +333,7 @@
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <0 19 1>;
interrupts = <0 19 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
@ -343,7 +343,7 @@
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <0 20 1>;
interrupts = <0 20 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
@ -353,7 +353,7 @@
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <0 7 1>;
interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
@ -362,7 +362,7 @@
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <0 8 1>;
interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
@ -371,7 +371,7 @@
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <0 9 1>;
interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
@ -380,7 +380,7 @@
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <0 88 1>;
interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
@ -389,7 +389,7 @@
i2c4: i2c@01c2bc00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2bc00 0x400>;
interrupts = <0 89 1>;
interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";

3
arch/arm/configs/multi_v7_defconfig
View File

@ -69,6 +69,7 @@ CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y

1
arch/arm/configs/omap2plus_defconfig
View File

@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y

7
arch/arm/configs/sunxi_defconfig
View File

@ -12,6 +12,9 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS=y
CONFIG_PRINTK_TIME=y

3
arch/arm/configs/u8500_defconfig
View File

@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set

31
arch/arm/include/asm/memory.h
View File

@ -100,23 +100,19 @@
#define TASK_UNMAPPED_BASE UL(0x00000000)
#endif
#ifndef PHYS_OFFSET
#define PHYS_OFFSET UL(CONFIG_DRAM_BASE)
#endif
#ifndef END_MEM
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif
#ifndef PAGE_OFFSET
#define PAGE_OFFSET (PHYS_OFFSET)
#define PAGE_OFFSET PLAT_PHYS_OFFSET
#endif
/*
* The module can be at any place in ram in nommu mode.
*/
#define MODULES_END (END_MEM)
#define MODULES_VADDR (PHYS_OFFSET)
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
@ -157,6 +153,16 @@
#endif
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
/*
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
* memory. This is used for XIP and NoMMU kernels, or by kernels which
* have their own mach/memory.h. Assembly code must always use
* PLAT_PHYS_OFFSET and not PHYS_OFFSET.
*/
#ifndef PLAT_PHYS_OFFSET
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
#endif
#ifndef __ASSEMBLY__
/*
@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
#else
#define PHYS_OFFSET PLAT_PHYS_OFFSET
static inline phys_addr_t __virt_to_phys(unsigned long x)
{
return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
#endif
#endif
#endif /* __ASSEMBLY__ */
#ifndef PHYS_OFFSET
#ifdef PLAT_PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET
#else
#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
#endif
#endif
#ifndef __ASSEMBLY__
/*
* PFNs are used to describe any physical page; this means

2
arch/arm/include/asm/pgtable.h
View File

@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
* mapping to be mapped at. This is particularly important for
* non-high vector CPUs.
*/
#define FIRST_USER_ADDRESS PAGE_SIZE
#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
/*
* Use TASK_SIZE as the ceiling argument for free_pgtables() and

4
arch/arm/kernel/head-nommu.S
View File

@ -68,7 +68,7 @@ ENTRY(stext)
#ifdef CONFIG_ARM_MPU
/* Calculate the size of a region covering just the kernel */
ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET
ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
ldr r6, =(_end) @ Cover whole kernel
sub r6, r6, r5 @ Minimum size of region to map
clz r6, r6 @ Region size must be 2^N...
@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
set_region_nr r0, #MPU_RAM_REGION
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled

2
arch/arm/kernel/head.S
View File

@ -110,7 +110,7 @@ ENTRY(stext)
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
ldr r8, =PHYS_OFFSET @ always constant in this case
ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
#endif
/*

17
arch/arm/kernel/machine_kexec.c
View File

@ -14,11 +14,12 @@
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include <asm/system_misc.h>
extern const unsigned char relocate_new_kernel[];
extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
extern unsigned long kexec_start_address;
@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
unsigned long reboot_entry_phys;
void *reboot_code_buffer;
/*
@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
reboot_entry = fncpy(reboot_code_buffer,
reboot_entry,
relocate_new_kernel_size);
reboot_entry_phys = (unsigned long)reboot_entry +
(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
kexec_reinit();
soft_restart(reboot_code_buffer_phys);
soft_restart(reboot_entry_phys);
}

7
arch/arm/kernel/process.c
View File

@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
unsigned long get_wchan(struct task_struct *p)
{
struct stackframe frame;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
frame.sp = thread_saved_sp(p);
frame.lr = 0; /* recovered from the stack */
frame.pc = thread_saved_pc(p);
stack_page = (unsigned long)task_stack_page(p);
do {
int ret = unwind_frame(&frame);
if (ret < 0)
if (frame.sp < stack_page ||
frame.sp >= stack_page + THREAD_SIZE ||
unwind_frame(&frame) < 0)
return 0;
if (!in_sched_functions(frame.pc))
return frame.pc;

8
arch/arm/kernel/relocate_kernel.S
View File

@ -2,10 +2,12 @@
* relocate_kernel.S - put the kernel image in place to boot
*/
#include <linux/linkage.h>
#include <asm/kexec.h>
.globl relocate_new_kernel
relocate_new_kernel:
.align 3 /* not needed for this code, but keeps fncpy() happy */
ENTRY(relocate_new_kernel)
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
@ -79,6 +81,8 @@ kexec_mach_type:
kexec_boot_atags:
.long 0x0
ENDPROC(relocate_new_kernel)
relocate_new_kernel_end:
.globl relocate_new_kernel_size

3
arch/arm/kernel/setup.c
View File

@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
machine_desc = mdesc;
machine_name = mdesc->name;
setup_dma_zone(mdesc);
if (mdesc->reboot_mode != REBOOT_HARD)
reboot_mode = mdesc->reboot_mode;
@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
setup_dma_zone(mdesc);
sanity_check_meminfo();
arm_memblock_init(&meminfo, mdesc);

40
arch/arm/kernel/sigreturn_codes.S
View File

@ -30,6 +30,27 @@
* snippets.
*/
/*
* In CPU_THUMBONLY case kernel arm opcodes are not allowed.
* Note in this case codes skips those instructions but it uses .org
* directive to keep correct layout of sigreturn_codes array.
*/
#ifndef CONFIG_CPU_THUMBONLY
#define ARM_OK(code...) code
#else
#define ARM_OK(code...)
#endif
.macro arm_slot n
.org sigreturn_codes + 12 * (\n)
ARM_OK( .arm )
.endm
.macro thumb_slot n
.org sigreturn_codes + 12 * (\n) + 8
.thumb
.endm
#if __LINUX_ARM_ARCH__ <= 4
/*
* Note we manually set minimally required arch that supports
@ -45,26 +66,27 @@
.global sigreturn_codes
.type sigreturn_codes, #object
.arm
.align
sigreturn_codes:
/* ARM sigreturn syscall code snippet */
mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
arm_slot 0
ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn syscall code snippet */
.thumb
thumb_slot 0
movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #0
/* ARM sigreturn_rt syscall code snippet */
.arm
mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
arm_slot 1
ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn_rt syscall code snippet */
.thumb
thumb_slot 1
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #0
@ -74,7 +96,7 @@ sigreturn_codes:
* it is thumb case or not, so we need additional
* word after real last entry.
*/
.arm
arm_slot 2
.space 4
.size sigreturn_codes, . - sigreturn_codes

2
arch/arm/kernel/stacktrace.c
View File

@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)
if (fp < low + 12 || fp > high - 4)
return -EINVAL;
/* restore the registers from the stack frame */

3
arch/arm/kernel/traps.c
View File

@ -509,9 +509,10 @@ static inline int
__do_cache_op(unsigned long start, unsigned long end)
{
int ret;
unsigned long chunk = PAGE_SIZE;
do {
unsigned long chunk = min(PAGE_SIZE, end - start);
if (signal_pending(current)) {
struct thread_info *ti = current_thread_info();

1
arch/arm/lib/delay-loop.S
View File

@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
*/
.align 3
@ Delay routine
ENTRY(__loop_delay)

7
arch/arm/mach-at91/at91rm9200_time.c
View File

@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&clkevt);
clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);

4
arch/arm/mach-at91/pm.h
View File

@ -16,7 +16,11 @@
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
#endif
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will

1
arch/arm/mach-davinci/da830.c
View File

@ -1153,7 +1153,6 @@ static struct davinci_id da830_ids[] = {
static struct davinci_gpio_platform_data da830_gpio_platform_data = {
.ngpio = 128,
.intc_irq_num = DA830_N_CP_INTC_IRQ,
};
int __init da830_register_gpio(void)

1
arch/arm/mach-davinci/da850.c
View File

@ -1283,7 +1283,6 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
static struct davinci_gpio_platform_data da850_gpio_platform_data = {
.ngpio = 144,
.intc_irq_num = DA850_N_CP_INTC_IRQ,
};
int __init da850_register_gpio(void)

4
arch/arm/mach-davinci/devices-da8xx.c
View File

@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
static struct resource da830_mcasp1_resources[] = {
{
.name = "mcasp1",
.name = "mpu",
.start = DAVINCI_DA830_MCASP1_REG_BASE,
.end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
static struct resource da850_mcasp_resources[] = {
{
.name = "mcasp",
.name = "mpu",
.start = DAVINCI_DA8XX_MCASP0_REG_BASE,
.end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,

4
arch/arm/mach-davinci/dm355.c
View File

@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
static struct resource dm355_asp1_resources[] = {
{
.name = "mpu",
.start = DAVINCI_ASP1_BASE,
.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
@ -900,13 +901,12 @@ static struct resource dm355_gpio_resources[] = {
static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
.ngpio = 104,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm355_gpio_register(void)
{
return davinci_gpio_register(dm355_gpio_resources,
sizeof(dm355_gpio_resources),
ARRAY_SIZE(dm355_gpio_resources),
&dm355_gpio_platform_data);
}
/*----------------------------------------------------------------------*/

4
arch/arm/mach-davinci/dm365.c
View File

@ -713,14 +713,13 @@ static struct resource dm365_gpio_resources[] = {
static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
.ngpio = 104,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.gpio_unbanked = 8,
};
int __init dm365_gpio_register(void)
{
return davinci_gpio_register(dm365_gpio_resources,
sizeof(dm365_gpio_resources),
ARRAY_SIZE(dm365_gpio_resources),
&dm365_gpio_platform_data);
}
@ -942,6 +941,7 @@ static struct platform_device dm365_edma_device = {
static struct resource dm365_asp_resources[] = {
{
.name = "mpu",
.start = DAVINCI_DM365_ASP0_BASE,
.end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,

4
arch/arm/mach-davinci/dm644x.c
View File

@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource dm644x_asp_resources[] = {
{
.name = "mpu",
.start = DAVINCI_ASP0_BASE,
.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
@ -786,13 +787,12 @@ static struct resource dm644_gpio_resources[] = {
static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
.ngpio = 71,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm644x_gpio_register(void)
{
return davinci_gpio_register(dm644_gpio_resources,
sizeof(dm644_gpio_resources),
ARRAY_SIZE(dm644_gpio_resources),
&dm644_gpio_platform_data);
}
/*----------------------------------------------------------------------*/

7
arch/arm/mach-davinci/dm646x.c
View File

@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
static struct resource dm646x_mcasp0_resources[] = {
{
.name = "mcasp0",
.name = "mpu",
.start = DAVINCI_DM646X_MCASP0_REG_BASE,
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
static struct resource dm646x_mcasp1_resources[] = {
{
.name = "mcasp1",
.name = "mpu",
.start = DAVINCI_DM646X_MCASP1_REG_BASE,
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
@ -763,13 +763,12 @@ static struct resource dm646x_gpio_resources[] = {
static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
.ngpio = 43,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm646x_gpio_register(void)
{
return davinci_gpio_register(dm646x_gpio_resources,
sizeof(dm646x_gpio_resources),
ARRAY_SIZE(dm646x_gpio_resources),
&dm646x_gpio_platform_data);
}
/*----------------------------------------------------------------------*/

3
arch/arm/mach-footbridge/common.c
View File

@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <video/vga.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
}
vga_base = PCIMEM_BASE;
}
void footbridge_restart(enum reboot_mode mode, const char *cmd)

2
arch/arm/mach-footbridge/dc21285.c
View File

@ -18,7 +18,6 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
int cfn_mode;
pcibios_min_mem = 0x81000000;
vga_base = PCIMEM_BASE;
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)

22
arch/arm/mach-footbridge/ebsa285.c
View File

@ -30,21 +30,24 @@ static const struct {
const char *name;
const char *trigger;
} ebsa285_leds[] = {
{ "ebsa285:amber", "heartbeat", },
{ "ebsa285:green", "cpu0", },
{ "ebsa285:amber", "cpu0", },
{ "ebsa285:green", "heartbeat", },
{ "ebsa285:red",},
};
static unsigned char hw_led_state;
static void ebsa285_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
if (b != LED_OFF)
*XBUS_LEDS |= led->mask;
if (b == LED_OFF)
hw_led_state |= led->mask;
else
*XBUS_LEDS &= ~led->mask;
hw_led_state &= ~led->mask;
*XBUS_LEDS = hw_led_state;
}
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
return hw_led_state & led->mask ? LED_OFF : LED_FULL;
}
static int __init ebsa285_leds_init(void)
{
int i;
if (machine_is_ebsa285())
if (!machine_is_ebsa285())
return -ENODEV;
/* 3 LEDS All ON */
*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
/* 3 LEDS all off */
hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
*XBUS_LEDS = hw_led_state;
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
struct ebsa285_led *led;

23
arch/arm/mach-highbank/highbank.c
View File

@ -17,12 +17,15 @@
#include <linux/clkdev.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/mailbox.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
.name = "cpuidle-calxeda",
};
static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
{
u32 key = *(u32 *)data;
if (event != 0x1000)
return 0;
if (key == KEY_POWER)
orderly_poweroff(false);
else if (key == 0xffff)
ctrl_alt_del();
return 0;
}
static struct notifier_block hb_keys_nb = {
.notifier_call = hb_keys_notifier,
};
static void __init highbank_init(void)
{
struct device_node *np;
@ -145,6 +166,8 @@ static void __init highbank_init(void)
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
pl320_ipc_register_notifier(&hb_keys_nb);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)

18
arch/arm/mach-omap2/board-generic.c
View File

@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
static const char *am3517_boards_compat[] __initdata = {
"ti,am3517",
NULL,
};
DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_gptimer_timer_init,
.dt_compat = am3517_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
#endif
#ifdef CONFIG_SOC_AM33XX

2
arch/arm/mach-omap2/dss-common.c
View File

@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 3,
.i2c_bus_num = 2,
};
static struct platform_device omap3_igep2_dvi_connector_device = {

24
arch/arm/mach-omap2/omap_device.c
View File

@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
odbfd_exit1:
kfree(hwmods);
odbfd_exit:
/* if data/we are at fault.. load up a fail handler */
if (ret)
pdev->dev.pm_domain = &omap_device_fail_pm_domain;
return ret;
}
@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
return pm_generic_runtime_resume(dev);
}
static int _od_fail_runtime_suspend(struct device *dev)
{
dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
return -ENODEV;
}
static int _od_fail_runtime_resume(struct device *dev)
{
dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
return -ENODEV;
}
#endif
#ifdef CONFIG_SUSPEND
@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
#define _od_resume_noirq NULL
#endif
struct dev_pm_domain omap_device_fail_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
_od_fail_runtime_resume, NULL)
}
};
struct dev_pm_domain omap_device_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,

1
arch/arm/mach-omap2/omap_device.h
View File

@ -29,6 +29,7 @@
#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
extern struct dev_pm_domain omap_device_fail_pm_domain;
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0

143
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
}
/**
* _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
* _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
* @oh: struct omap_hwmod *
* @v: pointer to register contents to modify
*
@ -426,6 +426,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
return 0;
}
/**
* _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
* @oh: struct omap_hwmod *
* @v: pointer to register contents to modify
*
* Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
* error or 0 upon success.
*/
static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
{
u32 softrst_mask;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1,
"omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
oh->name);
return -EINVAL;
}
softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
*v &= ~softrst_mask;
return 0;
}
/**
* _wait_softreset_complete - wait for an OCP softreset to complete
* @oh: struct omap_hwmod * to wait on
@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
continue;
}
os->_clk = c;
/*
@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
continue;
}
oc->_clk = c;
/*
@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
ret = _set_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
_write_sysconfig(v, oh);
ret = _clear_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh)
return 0;
}
static int of_dev_find_hwmod(struct device_node *np,
struct omap_hwmod *oh)
{
int count, i, res;
const char *p;
count = of_property_count_strings(np, "ti,hwmods");
if (count < 1)
return -ENODEV;
for (i = 0; i < count; i++) {
res = of_property_read_string_index(np, "ti,hwmods",
i, &p);
if (res)
continue;
if (!strcmp(p, oh->name)) {
pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
np->name, i, oh->name);
return i;
}
}
return -ENODEV;
}
/**
* of_dev_hwmod_lookup - look up needed hwmod from dt blob
* @np: struct device_node *
* @oh: struct omap_hwmod *
* @index: index of the entry found
* @found: struct device_node * found or NULL
*
* Parse the dt blob and find out needed hwmod. Recursive function is
* implemented to take care hierarchical dt blob parsing.
* Return: The device node on success or NULL on failure.
* Return: Returns 0 on success, -ENODEV when not found.
*/
static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
struct omap_hwmod *oh)
static int of_dev_hwmod_lookup(struct device_node *np,
struct omap_hwmod *oh,
int *index,
struct device_node **found)
{
struct device_node *np0 = NULL, *np1 = NULL;
const char *p;
struct device_node *np0 = NULL;
int res;
res = of_dev_find_hwmod(np, oh);
if (res >= 0) {
*found = np;
*index = res;
return 0;
}
for_each_child_of_node(np, np0) {
if (of_find_property(np0, "ti,hwmods", NULL)) {
p = of_get_property(np0, "ti,hwmods", NULL);
if (!strcmp(p, oh->name))
return np0;
np1 = of_dev_hwmod_lookup(np0, oh);
if (np1)
return np1;
struct device_node *fc;
int i;
res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
if (res == 0) {
*found = fc;
*index = i;
return 0;
}
}
return NULL;
*found = NULL;
*index = 0;
return -ENODEV;
}
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
* @data: (unused, caller should pass NULL)
* @index: index of the reg entry iospace in device tree
* @np: struct device_node * of the IP block's device node in the DT data
*
* Cache the virtual address used by the MPU to access this IP block's
@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
* -ENXIO on absent or invalid register target address space.
*/
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
struct device_node *np)
int index, struct device_node *np)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start = NULL;
@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
if (!np)
return -ENXIO;
va_start = of_iomap(np, oh->mpu_rt_idx);
va_start = of_iomap(np, index + oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
if (!va_start) {
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
if (mem)
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
else
pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
oh->name, index, np->full_name);
return -ENXIO;
}
@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
*/
static int __init _init(struct omap_hwmod *oh, void *data)
{
int r;
int r, index;
struct device_node *np = NULL;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
if (of_have_populated_dt())
np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
if (of_have_populated_dt()) {
struct device_node *bus;
bus = of_find_node_by_name(NULL, "ocp");
if (!bus)
return -ENODEV;
r = of_dev_hwmod_lookup(bus, oh, &index, &np);
if (r)
pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
else if (np && index)
pr_warn("omap_hwmod: %s using broken dt data from %s\n",
oh->name, np->name);
}
if (oh->class->sysc) {
r = _init_mpu_rt_base(oh, NULL, np);
r = _init_mpu_rt_base(oh, NULL, index, np);
if (r < 0) {
WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
oh->name);
@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
goto error;
_write_sysconfig(v, oh);
ret = _clear_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}

13
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*

12
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET),
SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*

13
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View File

@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3init_60m_fclk",
.prcm = {
.omap4 = {

1
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

3
arch/arm/mach-omap2/powerdomain.c
View File

@ -128,7 +128,8 @@ skip_voltdm:
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
arch_pwrdm->pwrdm_wait_transition(pwrdm);
if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
arch_pwrdm->pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;

8
arch/arm/mach-pxa/reset.c
View File

@ -13,6 +13,7 @@
#include <mach/regs-ost.h>
#include <mach/reset.h>
#include <mach/smemc.h>
unsigned int reset_status;
EXPORT_SYMBOL(reset_status);
@ -81,6 +82,12 @@ static void do_hw_reset(void)
writel_relaxed(OSSR_M3, OSSR);
/* ... in 100 ms */
writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
/*
* SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
* we put SDRAM into self-refresh to prevent that
*/
while (1)
writel_relaxed(MDREFR_SLFRSH, MDREFR);
}
void pxa_restart(enum reboot_mode mode, const char *cmd)
@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd)
break;
}
}

102
arch/arm/mach-pxa/tosa.c
View File

@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
* Tosa Keyboard
*/
static const uint32_t tosakbd_keymap[] = {
KEY(0, 2, KEY_W),
KEY(0, 6, KEY_K),
KEY(0, 7, KEY_BACKSPACE),
KEY(0, 8, KEY_P),
KEY(1, 1, KEY_Q),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_T),
KEY(1, 4, KEY_Y),
KEY(1, 6, KEY_O),
KEY(1, 7, KEY_I),
KEY(1, 8, KEY_COMMA),
KEY(2, 1, KEY_A),
KEY(2, 2, KEY_D),
KEY(2, 3, KEY_G),
KEY(2, 4, KEY_U),
KEY(2, 6, KEY_L),
KEY(2, 7, KEY_ENTER),
KEY(2, 8, KEY_DOT),
KEY(3, 1, KEY_Z),
KEY(3, 2, KEY_C),
KEY(3, 3, KEY_V),
KEY(3, 4, KEY_J),
KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
KEY(3, 6, TOSA_KEY_CANCEL),
KEY(3, 7, TOSA_KEY_CENTER),
KEY(3, 8, TOSA_KEY_OK),
KEY(3, 9, KEY_LEFTSHIFT),
KEY(4, 1, KEY_S),
KEY(4, 2, KEY_R),
KEY(4, 3, KEY_B),
KEY(4, 4, KEY_N),
KEY(4, 5, TOSA_KEY_CALENDAR),
KEY(4, 6, TOSA_KEY_HOMEPAGE),
KEY(4, 7, KEY_LEFTCTRL),
KEY(4, 8, TOSA_KEY_LIGHT),
KEY(4, 10, KEY_RIGHTSHIFT),
KEY(5, 1, KEY_TAB),
KEY(5, 2, KEY_SLASH),
KEY(5, 3, KEY_H),
KEY(5, 4, KEY_M),
KEY(5, 5, TOSA_KEY_MENU),
KEY(5, 7, KEY_UP),
KEY(5, 11, TOSA_KEY_FN),
KEY(6, 1, KEY_X),
KEY(6, 2, KEY_F),
KEY(6, 3, KEY_SPACE),
KEY(6, 4, KEY_APOSTROPHE),
KEY(6, 5, TOSA_KEY_MAIL),
KEY(6, 6, KEY_LEFT),
KEY(6, 7, KEY_DOWN),
KEY(6, 8, KEY_RIGHT),
KEY(0, 1, KEY_W),
KEY(0, 5, KEY_K),
KEY(0, 6, KEY_BACKSPACE),
KEY(0, 7, KEY_P),
KEY(1, 0, KEY_Q),
KEY(1, 1, KEY_E),
KEY(1, 2, KEY_T),
KEY(1, 3, KEY_Y),
KEY(1, 5, KEY_O),
KEY(1, 6, KEY_I),
KEY(1, 7, KEY_COMMA),
KEY(2, 0, KEY_A),
KEY(2, 1, KEY_D),
KEY(2, 2, KEY_G),
KEY(2, 3, KEY_U),
KEY(2, 5, KEY_L),
KEY(2, 6, KEY_ENTER),
KEY(2, 7, KEY_DOT),
KEY(3, 0, KEY_Z),
KEY(3, 1, KEY_C),
KEY(3, 2, KEY_V),
KEY(3, 3, KEY_J),
KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
KEY(3, 5, TOSA_KEY_CANCEL),
KEY(3, 6, TOSA_KEY_CENTER),
KEY(3, 7, TOSA_KEY_OK),
KEY(3, 8, KEY_LEFTSHIFT),
KEY(4, 0, KEY_S),
KEY(4, 1, KEY_R),
KEY(4, 2, KEY_B),
KEY(4, 3, KEY_N),
KEY(4, 4, TOSA_KEY_CALENDAR),
KEY(4, 5, TOSA_KEY_HOMEPAGE),
KEY(4, 6, KEY_LEFTCTRL),
KEY(4, 7, TOSA_KEY_LIGHT),
KEY(4, 9, KEY_RIGHTSHIFT),
KEY(5, 0, KEY_TAB),
KEY(5, 1, KEY_SLASH),
KEY(5, 2, KEY_H),
KEY(5, 3, KEY_M),
KEY(5, 4, TOSA_KEY_MENU),
KEY(5, 6, KEY_UP),
KEY(5, 10, TOSA_KEY_FN),
KEY(6, 0, KEY_X),
KEY(6, 1, KEY_F),
KEY(6, 2, KEY_SPACE),
KEY(6, 3, KEY_APOSTROPHE),
KEY(6, 4, TOSA_KEY_MAIL),
KEY(6, 5, KEY_LEFT),
KEY(6, 6, KEY_DOWN),
KEY(6, 7, KEY_RIGHT),
};
static struct matrix_keymap_data tosakbd_keymap_data = {

1
arch/arm/mach-socfpga/Kconfig
View File

@ -10,6 +10,7 @@ config ARCH_SOCFPGA
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
select SPARSE_IRQ

2
arch/arm/mach-tegra/fuse.c
View File

@ -198,10 +198,12 @@ void __init tegra_init_fuse(void)
switch (tegra_chip_id) {
case TEGRA20:
tegra20_fuse_init_randomness();
break;
case TEGRA30:
case TEGRA114:
default:
tegra30_fuse_init_randomness();
break;
}
pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",

4
arch/arm/mach-ux500/cpu-db8500.c
View File

@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,

88
arch/arm/mm/dma-mapping.c
View File

@ -9,6 +9,7 @@
*
* DMA uncached mapping support.
*/
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/gfp.h>
@ -157,6 +158,44 @@ struct dma_map_ops arm_coherent_dma_ops = {
};
EXPORT_SYMBOL(arm_coherent_dma_ops);
static int __dma_supported(struct device *dev, u64 mask, bool warn)
{
unsigned long max_dma_pfn;
/*
* If the mask allows for more memory than we can address,
* and we actually have that much memory, then we must
* indicate that DMA to this device is not supported.
*/
if (sizeof(mask) != sizeof(dma_addr_t) &&
mask > (dma_addr_t)~0 &&
dma_to_pfn(dev, ~0) < max_pfn) {
if (warn) {
dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
mask);
dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
}
return 0;
}
max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
/*
* Translate the device's DMA mask to a PFN limit. This
* PFN number includes the page which we can DMA to.
*/
if (dma_to_pfn(dev, mask) < max_dma_pfn) {
if (warn)
dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
mask,
dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
max_dma_pfn + 1);
return 0;
}
return 1;
}
static u64 get_coherent_dma_mask(struct device *dev)
{
u64 mask = (u64)DMA_BIT_MASK(32);
@ -173,32 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
return 0;
}
/*
* If the mask allows for more memory than we can address,
* and we actually have that much memory, then fail the
* allocation.
*/
if (sizeof(mask) != sizeof(dma_addr_t) &&
mask > (dma_addr_t)~0 &&
dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
mask);
dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
if (!__dma_supported(dev, mask, true))
return 0;
}
/*
* Now check that the mask, when translated to a PFN,
* fits within the allowable addresses which we can
* allocate.
*/
if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
mask,
dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
arm_dma_pfn_limit + 1);
return 0;
}
}
return mask;
@ -1027,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
*/
int dma_supported(struct device *dev, u64 mask)
{
unsigned long limit;
/*
* If the mask allows for more memory than we can address,
* and we actually have that much memory, then we must
* indicate that DMA to this device is not supported.
*/
if (sizeof(mask) != sizeof(dma_addr_t) &&
mask > (dma_addr_t)~0 &&
dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
return 0;
/*
* Translate the device's DMA mask to a PFN limit. This
* PFN number includes the page which we can DMA to.
*/
limit = dma_to_pfn(dev, mask);
if (limit < arm_dma_pfn_limit)
return 0;
return 1;
return __dma_supported(dev, mask, false);
}
EXPORT_SYMBOL(dma_supported);

2
arch/arm/mm/init.c
View File

@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
arm_dma_zone_size = mdesc->dma_zone_size;
arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1;
} else
arm_dma_limit = 0xffffffff;
arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;

2
arch/arm/mm/mmap.c
View File

@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = PAGE_SIZE;
info.low_limit = FIRST_USER_ADDRESS;
info.high_limit = mm->mmap_base;
info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
info.align_offset = pgoff << PAGE_SHIFT;

3
arch/arm/mm/pgd.c
View File

@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
init_pud = pud_offset(init_pgd, 0);
init_pmd = pmd_offset(init_pud, 0);
init_pte = pte_offset_map(init_pmd, 0);
set_pte_ext(new_pte, *init_pte, 0);
set_pte_ext(new_pte + 0, init_pte[0], 0);
set_pte_ext(new_pte + 1, init_pte[1], 0);
pte_unmap(init_pte);
pte_unmap(new_pte);
}

Some files were not shown because too many files have changed in this diff Show More