From f42259ef810ce83f3e1a8ea4ce12dfda873fbe44 Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Wed, 19 Sep 2018 14:42:09 +0800 Subject: [PATCH 001/726] drm/i915/gvt: invalidate old ggtt page when update ggtt entry Previously only cancelled dma map of a ggtt page when the ggtt entry was cleared. This patch will cancel dma map of an old ggtt page as well when the ggtt entry is updated with new page address. Fixes: 7598e8700e9a(drm/i915/gvt: Missed to cancel dma map for ggtt entries) Signed-off-by: Hang Yuan Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 00aad8164dec..c11e353ca904 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -2259,16 +2259,18 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, } else ops->set_pfn(&m, dma_addr >> PAGE_SHIFT); } else { - ggtt_get_host_entry(ggtt_mm, &m, g_gtt_index); - ggtt_invalidate_pte(vgpu, &m); ops->set_pfn(&m, gvt->gtt.scratch_mfn); ops->clear_present(&m); } out: + ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); + + ggtt_get_host_entry(ggtt_mm, &e, g_gtt_index); + ggtt_invalidate_pte(vgpu, &e); + ggtt_set_host_entry(ggtt_mm, &m, g_gtt_index); ggtt_invalidate(gvt->dev_priv); - ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); return 0; } From 202dc3cc10b4d37e5251431acf8d5040a8876c7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 9 Oct 2018 19:41:58 +0200 Subject: [PATCH 002/726] serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ab3f6e91853d..e19bfbba8a01 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port) hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); s->rx_timer.function = rx_timer_fn; + s->chan_rx_saved = s->chan_rx = chan; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) sci_submit_rx(s); - - s->chan_rx_saved = s->chan_rx = chan; } } From 61792b677415b77c8db04991c22966bb8de7603e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 23 Oct 2018 16:47:16 +0200 Subject: [PATCH 003/726] netfilter: ipv6: fix oops when defragmenting locally generated fragments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unlike ipv4 and normal ipv6 defrag, netfilter ipv6 defragmentation did not save/restore skb->dst. This causes oops when handling locally generated ipv6 fragments, as output path needs a valid dst. Reported-by: Maciej Żenczykowski Fixes: 84379c9afe01 ("netfilter: ipv6: nf_defrag: drop skb dst before queueing") Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/nf_conntrack_reasm.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index b8ac369f98ad..d219979c3e52 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -587,11 +587,16 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user) */ ret = -EINPROGRESS; if (fq->q.flags == (INET_FRAG_FIRST_IN | INET_FRAG_LAST_IN) && - fq->q.meat == fq->q.len && - nf_ct_frag6_reasm(fq, skb, dev)) - ret = 0; - else + fq->q.meat == fq->q.len) { + unsigned long orefdst = skb->_skb_refdst; + + skb->_skb_refdst = 0UL; + if (nf_ct_frag6_reasm(fq, skb, dev)) + ret = 0; + skb->_skb_refdst = orefdst; + } else { skb_dst_drop(skb); + } out_unlock: spin_unlock_bh(&fq->q.lock); From 5e91c9d9cd3fd557226ca75fed58816b9eee7e07 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 22 Oct 2018 21:49:45 +0200 Subject: [PATCH 004/726] netfilter: nft_osf: check if attribute is present If the attribute is not sent, eg. old libnftnl binary, then tb[NFTA_OSF_TTL] is NULL and kernel crashes from the _init path. Fixes: a218dc82f0b5 ("netfilter: nft_osf: Add ttl option support") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_osf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nft_osf.c b/net/netfilter/nft_osf.c index ca5e5d8c5ef8..b13618c764ec 100644 --- a/net/netfilter/nft_osf.c +++ b/net/netfilter/nft_osf.c @@ -50,7 +50,7 @@ static int nft_osf_init(const struct nft_ctx *ctx, int err; u8 ttl; - if (nla_get_u8(tb[NFTA_OSF_TTL])) { + if (tb[NFTA_OSF_TTL]) { ttl = nla_get_u8(tb[NFTA_OSF_TTL]); if (ttl > 2) return -EINVAL; From 5a8de47b3c250521dd632cdedaac6db88367defa Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 24 Oct 2018 13:54:03 +0200 Subject: [PATCH 005/726] netfilter: bridge: define INT_MIN & INT_MAX in userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With 4.19, programs like ebtables fail to build when they include "linux/netfilter_bridge.h". It is caused by commit 94276fa8a2a4 which added a use of INT_MIN and INT_MAX to the header: : In file included from /usr/include/linux/netfilter_bridge/ebtables.h:18, : from include/ebtables_u.h:28, : from communication.c:23: : /usr/include/linux/netfilter_bridge.h:30:20: error: 'INT_MIN' undeclared here (not in a function) : NF_BR_PRI_FIRST = INT_MIN, : ^~~~~~~ Define these constants by including "limits.h" when !__KERNEL__ (the same way as for other netfilter_* headers). Fixes: 94276fa8a2a4 ("netfilter: bridge: Expose nf_tables bridge hook priorities through uapi") Signed-off-by: Jiri Slaby Acked-by: Máté Eckl Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter_bridge.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h index 156ccd089df1..1610fdbab98d 100644 --- a/include/uapi/linux/netfilter_bridge.h +++ b/include/uapi/linux/netfilter_bridge.h @@ -11,6 +11,10 @@ #include #include +#ifndef __KERNEL__ +#include /* for INT_MIN, INT_MAX */ +#endif + /* Bridge Hooks */ /* After promisc drops, checksum checks. */ #define NF_BR_PRE_ROUTING 0 From 1b50bb4d36e89fd54c14722c4ab5266ef17767ff Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 24 Oct 2018 22:44:39 +0200 Subject: [PATCH 006/726] Fix pattern handling optimalization Check for zero duration before skipping step. This fixes pattern echo "0 1000 10 2550 0 1000" > pattern which should do [ .-xXx-.] but does [ Xx-.] Signed-off-by: Pavel Machek Suggested-by: Jacek Anaszewski Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-pattern.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c index ce7acd115dd8..174a298f1be0 100644 --- a/drivers/leds/trigger/ledtrig-pattern.c +++ b/drivers/leds/trigger/ledtrig-pattern.c @@ -87,9 +87,10 @@ static void pattern_trig_timer_function(struct timer_list *t) data->curr->brightness); mod_timer(&data->timer, jiffies + msecs_to_jiffies(data->curr->delta_t)); - - /* Skip the tuple with zero duration */ - pattern_trig_update_patterns(data); + if (!data->next->delta_t) { + /* Skip the tuple with zero duration */ + pattern_trig_update_patterns(data); + } /* Select next tuple */ pattern_trig_update_patterns(data); } else { From ef5febae1543f35a45f01614123e829d77326d0f Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 19 Oct 2018 13:37:46 +0200 Subject: [PATCH 007/726] s390/decompressor: add missing FORCE to build targets According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vmlinux decompressor targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/Makefile | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile index 593039620487..92b5487b0556 100644 --- a/arch/s390/boot/compressed/Makefile +++ b/arch/s390/boot/compressed/Makefile @@ -22,7 +22,7 @@ OBJCOPYFLAGS := OBJECTS := $(addprefix $(obj)/,$(obj-y)) LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T -$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) +$(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE $(call if_changed,ld) OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info @@ -46,17 +46,17 @@ suffix-$(CONFIG_KERNEL_LZMA) := .lzma suffix-$(CONFIG_KERNEL_LZO) := .lzo suffix-$(CONFIG_KERNEL_XZ) := .xz -$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE $(call if_changed,lz4) -$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) -$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzo) -$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) +$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE $(call if_changed,xzkern) OBJCOPYFLAGS_piggy.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section .data=.vmlinux.bin.compressed From b44b136a3773d8a9c7853f8df716bd1483613cbb Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 19 Oct 2018 15:37:01 +0200 Subject: [PATCH 008/726] s390/vdso: add missing FORCE to build targets According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/vdso32/Makefile | 6 +++--- arch/s390/kernel/vdso64/Makefile | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile index eb8aebea3ea7..e76309fbbcb3 100644 --- a/arch/s390/kernel/vdso32/Makefile +++ b/arch/s390/kernel/vdso32/Makefile @@ -37,7 +37,7 @@ KASAN_SANITIZE := n $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so # link rule for the .so file, .lds has to be first -$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) +$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE $(call if_changed,vdso32ld) # strip rule for the .so file @@ -46,12 +46,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) # assembly rules for the .S files -$(obj-vdso32): %.o: %.S +$(obj-vdso32): %.o: %.S FORCE $(call if_changed_dep,vdso32as) # actual build commands quiet_cmd_vdso32ld = VDSO32L $@ - cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ + cmd_vdso32ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@ quiet_cmd_vdso32as = VDSO32A $@ cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $< diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile index a22b2cf86eec..f849ac61c5da 100644 --- a/arch/s390/kernel/vdso64/Makefile +++ b/arch/s390/kernel/vdso64/Makefile @@ -37,7 +37,7 @@ KASAN_SANITIZE := n $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so # link rule for the .so file, .lds has to be first -$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) +$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE $(call if_changed,vdso64ld) # strip rule for the .so file @@ -46,12 +46,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) # assembly rules for the .S files -$(obj-vdso64): %.o: %.S +$(obj-vdso64): %.o: %.S FORCE $(call if_changed_dep,vdso64as) # actual build commands quiet_cmd_vdso64ld = VDSO64L $@ - cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ + cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@ quiet_cmd_vdso64as = VDSO64A $@ cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $< From 5a2e1853d68904c4b26706dba2884cbeb77bc3ee Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Oct 2018 13:59:46 +0200 Subject: [PATCH 009/726] s390: avoid vmlinux segments overlap Currently .vmlinux.info section of uncompressed vmlinux elf image is included into the data segment and load address specified as 0. That extends data segment to address 0 and makes "text" and "data" segments overlap. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000001000 0x0000000000100000 0x0000000000100000 0x0000000000ead03c 0x0000000000ead03c R E 0x1000 LOAD 0x0000000000eaf000 0x0000000000000000 0x0000000000000000 0x0000000001a13400 0x000000000233b520 RWE 0x1000 NOTE 0x0000000000eae000 0x0000000000fad000 0x0000000000fad000 0x000000000000003c 0x000000000000003c 0x4 Section to Segment mapping: Segment Sections... 00 .text .notes 01 .rodata __ksymtab __ksymtab_gpl __ksymtab_strings __param __modver .data..ro_after_init __ex_table .data __bug_table .init.text .exit.text .exit.data .altinstructions .altinstr_replacement .nospec_call_table .nospec_return_table .boot.data .init.data .data..percpu .bss .vmlinux.info 02 .notes Later when vmlinux.bin is produced from vmlinux, .vmlinux.info section is removed. But elf vmlinux file, even though it is not bootable anymore, used for debugging and loadable segments overlap should be avoided. Utilize special ":NONE" phdr specification to avoid adding .vmlinux.info into loadable data segment. Also set .vmlinux.info section type to INFO, which allows to get a not-loadable info CONTENTS section. Since minimal supported version of binutils 2.20 does not have --dump-section objcopy option, make .vmlinux.info section loadable during info.bin creation to get actual section contents. Reported-by: Philipp Rudo Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/Makefile | 2 +- arch/s390/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile index 92b5487b0556..b1bdd15e3429 100644 --- a/arch/s390/boot/compressed/Makefile +++ b/arch/s390/boot/compressed/Makefile @@ -25,7 +25,7 @@ LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T $(obj)/vmlinux: $(obj)/vmlinux.lds $(objtree)/arch/s390/boot/startup.a $(OBJECTS) FORCE $(call if_changed,ld) -OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info +OBJCOPYFLAGS_info.bin := -O binary --only-section=.vmlinux.info --set-section-flags .vmlinux.info=load $(obj)/info.bin: vmlinux FORCE $(call if_changed,objcopy) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 21eb7407d51b..8429ab079715 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -154,14 +154,14 @@ SECTIONS * uncompressed image info used by the decompressor * it should match struct vmlinux_info */ - .vmlinux.info 0 : { + .vmlinux.info 0 (INFO) : { QUAD(_stext) /* default_lma */ QUAD(startup_continue) /* entry */ QUAD(__bss_start - _stext) /* image_size */ QUAD(__bss_stop - __bss_start) /* bss_size */ QUAD(__boot_data_start) /* bootdata_off */ QUAD(__boot_data_end - __boot_data_start) /* bootdata_size */ - } + } :NONE /* Debugging sections. */ STABS_DEBUG From f11274396a538b31bc010f782e05c2ce3f804c13 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 19 Oct 2018 17:01:33 -0300 Subject: [PATCH 010/726] HID: hiddev: fix potential Spectre v1 uref->usage_index can be indirectly controlled by userspace, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This field is used as an array index by the hiddev_ioctl_usage() function, when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or HIDIOCSUSAGES. For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to field->maxusage and then used as an index to dereference field->usage array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where uref->usage_index is checked against an array maximum value and then it is used as an index in an array. This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the traditional Spectre V1 first load: copy_from_user(uref, user_arg, sizeof(*uref)) if (uref->usage_index >= field->maxusage) goto inval; i = field->usage[uref->usage_index].collection_index; return i; This patch fixes this by sanitizing field uref->usage_index before using it to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load. Cc: Signed-off-by: Breno Leitao -- v2: Contemplate cmd == HIDIOC{G,S}USAGES case Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 23872d08308c..a746017fac17 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -512,14 +512,24 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd, if (cmd == HIDIOCGCOLLECTIONINDEX) { if (uref->usage_index >= field->maxusage) goto inval; + uref->usage_index = + array_index_nospec(uref->usage_index, + field->maxusage); } else if (uref->usage_index >= field->report_count) goto inval; } - if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) && - (uref_multi->num_values > HID_MAX_MULTI_USAGES || - uref->usage_index + uref_multi->num_values > field->report_count)) - goto inval; + if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) { + if (uref_multi->num_values > HID_MAX_MULTI_USAGES || + uref->usage_index + uref_multi->num_values > + field->report_count) + goto inval; + + uref->usage_index = + array_index_nospec(uref->usage_index, + field->report_count - + uref_multi->num_values); + } switch (cmd) { case HIDIOCGUSAGE: From 00b790ea545b6ef30221adef6e9c3707e03b82b5 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 5 Oct 2018 12:46:29 +0800 Subject: [PATCH 011/726] HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel Raydium touchpanel (2386:4B33) sometimes does not work in desktop session although it works in display manager. During user logging, the display manager exits, close the HID device, then the device gets runtime suspended and powered off. The desktop session begins shortly after, opens the HID device, then the device gets runtime resumed and powered on. If the trasition from display manager to desktop sesesion is fast, the touchpanel cannot switch from powered off to powered on in short timeframe. So add a small delay to workaround the issue. Signed-off-by: Kai-Heng Feng Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/i2c-hid/i2c-hid-core.c | 19 +++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f63489c882bb..c0d668944dbe 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -927,6 +927,9 @@ #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003 0x3003 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008 +#define I2C_VENDOR_ID_RAYDIUM 0x2386 +#define I2C_PRODUCT_ID_RAYDIUM_4B33 0x4b33 + #define USB_VENDOR_ID_RAZER 0x1532 #define USB_DEVICE_ID_RAZER_BLADE_14 0x011D diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 4aab96cf0818..3cde7c1b9c33 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -49,6 +49,7 @@ #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0) #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1) #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2) +#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3) /* flags */ #define I2C_HID_STARTED 0 @@ -158,6 +159,8 @@ struct i2c_hid { bool irq_wake_enabled; struct mutex reset_lock; + + unsigned long sleep_delay; }; static const struct i2c_hid_quirks { @@ -172,6 +175,8 @@ static const struct i2c_hid_quirks { { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288, I2C_HID_QUIRK_NO_IRQ_AFTER_RESET | I2C_HID_QUIRK_NO_RUNTIME_PM }, + { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33, + I2C_HID_QUIRK_DELAY_AFTER_SLEEP }, { 0, 0 } }; @@ -387,6 +392,7 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) { struct i2c_hid *ihid = i2c_get_clientdata(client); int ret; + unsigned long now, delay; i2c_hid_dbg(ihid, "%s\n", __func__); @@ -404,9 +410,22 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) goto set_pwr_exit; } + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && + power_state == I2C_HID_PWR_ON) { + now = jiffies; + if (time_after(ihid->sleep_delay, now)) { + delay = jiffies_to_usecs(ihid->sleep_delay - now); + usleep_range(delay, delay + 1); + } + } + ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state, 0, NULL, 0, NULL, 0); + if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP && + power_state == I2C_HID_PWR_SLEEP) + ihid->sleep_delay = jiffies + msecs_to_jiffies(20); + if (ret) dev_err(&client->dev, "failed to change power setting.\n"); From 6298944d8f57f40ee2a3e6dcea1253e78d7a9969 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 17 Oct 2018 09:01:53 +0200 Subject: [PATCH 012/726] Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS" This reverts commit 67ddbb3e6568fb1820b2cc45b00c50702b114801. 67ddbb3e656 ("HID: add NOGET quirk for Eaton Ellipse MAX UPS") was reported by Laurent Bigonville. It turns out that a later model Laurent got doesn't need the quirk after all. My take is that Eaton upgraded their firmwares, so we don't need it anymore. The old model was from 2012, so better make sure the new line works properly by removing the quirk. This allows upower to actually fetch the current data. Reported-by: Laurent Bigonville Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-quirks.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 52c3b01917e7..8237dd86fb17 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -107,7 +107,6 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT }, - { HID_USB_DEVICE(USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS }, From 7dd8db68949a7acc5bd528ee0ecb8f8720f49921 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Fri, 12 Oct 2018 16:05:25 +0200 Subject: [PATCH 013/726] HID: alps: allow incoming reports when only the trackstick is opened If userspace only reads the trackstick node, and no one is listening to the touchpad nor the hidraw node then, the device is not powered on. Add open/close callbacks to allow users to disable the touchpad in Gnome while keeping the trackstick active. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1559632 Link: https://gitlab.gnome.org/GNOME/mutter/issues/128 Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-alps.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/hid/hid-alps.c b/drivers/hid/hid-alps.c index aec253b44156..3cd7229b6e54 100644 --- a/drivers/hid/hid-alps.c +++ b/drivers/hid/hid-alps.c @@ -660,6 +660,20 @@ exit: return ret; } +static int alps_sp_open(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + return hid_hw_open(hid); +} + +static void alps_sp_close(struct input_dev *dev) +{ + struct hid_device *hid = input_get_drvdata(dev); + + hid_hw_close(hid); +} + static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi) { struct alps_dev *data = hid_get_drvdata(hdev); @@ -733,6 +747,10 @@ static int alps_input_configured(struct hid_device *hdev, struct hid_input *hi) input2->id.version = input->id.version; input2->dev.parent = input->dev.parent; + input_set_drvdata(input2, hdev); + input2->open = alps_sp_open; + input2->close = alps_sp_close; + __set_bit(EV_KEY, input2->evbit); data->sp_btn_cnt = (data->sp_btn_info & 0x0F); for (i = 0; i < data->sp_btn_cnt; i++) From 4269fea768a11a447d8de620ce420f2214d4685c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 26 Oct 2018 11:14:28 +0200 Subject: [PATCH 014/726] Revert "netfilter: nft_numgen: add map lookups for numgen random operations" Laura found a better way to do this from userspace without requiring kernel infrastructure, revert this. Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations") Signed-off-by: Laura Garcia Liebana Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/nf_tables.h | 4 +- net/netfilter/nft_numgen.c | 127 ----------------------- 2 files changed, 2 insertions(+), 129 deletions(-) diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index 579974b0bf0d..7de4f1bdaf06 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -1635,8 +1635,8 @@ enum nft_ng_attributes { NFTA_NG_MODULUS, NFTA_NG_TYPE, NFTA_NG_OFFSET, - NFTA_NG_SET_NAME, - NFTA_NG_SET_ID, + NFTA_NG_SET_NAME, /* deprecated */ + NFTA_NG_SET_ID, /* deprecated */ __NFTA_NG_MAX }; #define NFTA_NG_MAX (__NFTA_NG_MAX - 1) diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c index 649d1700ec5b..3cc1b3dc3c3c 100644 --- a/net/netfilter/nft_numgen.c +++ b/net/netfilter/nft_numgen.c @@ -24,7 +24,6 @@ struct nft_ng_inc { u32 modulus; atomic_t counter; u32 offset; - struct nft_set *map; }; static u32 nft_ng_inc_gen(struct nft_ng_inc *priv) @@ -48,34 +47,11 @@ static void nft_ng_inc_eval(const struct nft_expr *expr, regs->data[priv->dreg] = nft_ng_inc_gen(priv); } -static void nft_ng_inc_map_eval(const struct nft_expr *expr, - struct nft_regs *regs, - const struct nft_pktinfo *pkt) -{ - struct nft_ng_inc *priv = nft_expr_priv(expr); - const struct nft_set *map = priv->map; - const struct nft_set_ext *ext; - u32 result; - bool found; - - result = nft_ng_inc_gen(priv); - found = map->ops->lookup(nft_net(pkt), map, &result, &ext); - - if (!found) - return; - - nft_data_copy(®s->data[priv->dreg], - nft_set_ext_data(ext), map->dlen); -} - static const struct nla_policy nft_ng_policy[NFTA_NG_MAX + 1] = { [NFTA_NG_DREG] = { .type = NLA_U32 }, [NFTA_NG_MODULUS] = { .type = NLA_U32 }, [NFTA_NG_TYPE] = { .type = NLA_U32 }, [NFTA_NG_OFFSET] = { .type = NLA_U32 }, - [NFTA_NG_SET_NAME] = { .type = NLA_STRING, - .len = NFT_SET_MAXNAMELEN - 1 }, - [NFTA_NG_SET_ID] = { .type = NLA_U32 }, }; static int nft_ng_inc_init(const struct nft_ctx *ctx, @@ -101,22 +77,6 @@ static int nft_ng_inc_init(const struct nft_ctx *ctx, NFT_DATA_VALUE, sizeof(u32)); } -static int nft_ng_inc_map_init(const struct nft_ctx *ctx, - const struct nft_expr *expr, - const struct nlattr * const tb[]) -{ - struct nft_ng_inc *priv = nft_expr_priv(expr); - u8 genmask = nft_genmask_next(ctx->net); - - nft_ng_inc_init(ctx, expr, tb); - - priv->map = nft_set_lookup_global(ctx->net, ctx->table, - tb[NFTA_NG_SET_NAME], - tb[NFTA_NG_SET_ID], genmask); - - return PTR_ERR_OR_ZERO(priv->map); -} - static int nft_ng_dump(struct sk_buff *skb, enum nft_registers dreg, u32 modulus, enum nft_ng_types type, u32 offset) { @@ -143,27 +103,10 @@ static int nft_ng_inc_dump(struct sk_buff *skb, const struct nft_expr *expr) priv->offset); } -static int nft_ng_inc_map_dump(struct sk_buff *skb, - const struct nft_expr *expr) -{ - const struct nft_ng_inc *priv = nft_expr_priv(expr); - - if (nft_ng_dump(skb, priv->dreg, priv->modulus, - NFT_NG_INCREMENTAL, priv->offset) || - nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name)) - goto nla_put_failure; - - return 0; - -nla_put_failure: - return -1; -} - struct nft_ng_random { enum nft_registers dreg:8; u32 modulus; u32 offset; - struct nft_set *map; }; static u32 nft_ng_random_gen(struct nft_ng_random *priv) @@ -183,25 +126,6 @@ static void nft_ng_random_eval(const struct nft_expr *expr, regs->data[priv->dreg] = nft_ng_random_gen(priv); } -static void nft_ng_random_map_eval(const struct nft_expr *expr, - struct nft_regs *regs, - const struct nft_pktinfo *pkt) -{ - struct nft_ng_random *priv = nft_expr_priv(expr); - const struct nft_set *map = priv->map; - const struct nft_set_ext *ext; - u32 result; - bool found; - - result = nft_ng_random_gen(priv); - found = map->ops->lookup(nft_net(pkt), map, &result, &ext); - if (!found) - return; - - nft_data_copy(®s->data[priv->dreg], - nft_set_ext_data(ext), map->dlen); -} - static int nft_ng_random_init(const struct nft_ctx *ctx, const struct nft_expr *expr, const struct nlattr * const tb[]) @@ -226,21 +150,6 @@ static int nft_ng_random_init(const struct nft_ctx *ctx, NFT_DATA_VALUE, sizeof(u32)); } -static int nft_ng_random_map_init(const struct nft_ctx *ctx, - const struct nft_expr *expr, - const struct nlattr * const tb[]) -{ - struct nft_ng_random *priv = nft_expr_priv(expr); - u8 genmask = nft_genmask_next(ctx->net); - - nft_ng_random_init(ctx, expr, tb); - priv->map = nft_set_lookup_global(ctx->net, ctx->table, - tb[NFTA_NG_SET_NAME], - tb[NFTA_NG_SET_ID], genmask); - - return PTR_ERR_OR_ZERO(priv->map); -} - static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr) { const struct nft_ng_random *priv = nft_expr_priv(expr); @@ -249,22 +158,6 @@ static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr) priv->offset); } -static int nft_ng_random_map_dump(struct sk_buff *skb, - const struct nft_expr *expr) -{ - const struct nft_ng_random *priv = nft_expr_priv(expr); - - if (nft_ng_dump(skb, priv->dreg, priv->modulus, - NFT_NG_RANDOM, priv->offset) || - nla_put_string(skb, NFTA_NG_SET_NAME, priv->map->name)) - goto nla_put_failure; - - return 0; - -nla_put_failure: - return -1; -} - static struct nft_expr_type nft_ng_type; static const struct nft_expr_ops nft_ng_inc_ops = { .type = &nft_ng_type, @@ -274,14 +167,6 @@ static const struct nft_expr_ops nft_ng_inc_ops = { .dump = nft_ng_inc_dump, }; -static const struct nft_expr_ops nft_ng_inc_map_ops = { - .type = &nft_ng_type, - .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_inc)), - .eval = nft_ng_inc_map_eval, - .init = nft_ng_inc_map_init, - .dump = nft_ng_inc_map_dump, -}; - static const struct nft_expr_ops nft_ng_random_ops = { .type = &nft_ng_type, .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)), @@ -290,14 +175,6 @@ static const struct nft_expr_ops nft_ng_random_ops = { .dump = nft_ng_random_dump, }; -static const struct nft_expr_ops nft_ng_random_map_ops = { - .type = &nft_ng_type, - .size = NFT_EXPR_SIZE(sizeof(struct nft_ng_random)), - .eval = nft_ng_random_map_eval, - .init = nft_ng_random_map_init, - .dump = nft_ng_random_map_dump, -}; - static const struct nft_expr_ops * nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[]) { @@ -312,12 +189,8 @@ nft_ng_select_ops(const struct nft_ctx *ctx, const struct nlattr * const tb[]) switch (type) { case NFT_NG_INCREMENTAL: - if (tb[NFTA_NG_SET_NAME]) - return &nft_ng_inc_map_ops; return &nft_ng_inc_ops; case NFT_NG_RANDOM: - if (tb[NFTA_NG_SET_NAME]) - return &nft_ng_random_map_ops; return &nft_ng_random_ops; } From c6e0bba4ac44fd3d116d763c834dd43f3824f635 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sat, 27 Oct 2018 14:16:13 +0200 Subject: [PATCH 015/726] HID: moving to group maintainership model Benjamin and myself will from now on be sharing maintainership responsibilities for hid.git. Update maintainers to reflect that change, and also move a git repository to shared space at kernel.org. Signed-off-by: Jiri Kosina Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c0c4c5003998..4715cb8d9584 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6588,9 +6588,9 @@ F: arch/*/include/asm/suspend*.h HID CORE LAYER M: Jiri Kosina -R: Benjamin Tissoires +M: Benjamin Tissoires L: linux-input@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git S: Maintained F: drivers/hid/ F: include/linux/hid* @@ -15254,9 +15254,9 @@ F: include/linux/usb/gadget* USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...) M: Jiri Kosina -R: Benjamin Tissoires +M: Benjamin Tissoires L: linux-usb@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git S: Maintained F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ From bc0686ff5fad7a842cc88377439e78be87fedc80 Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Wed, 19 Sep 2018 14:42:10 +0800 Subject: [PATCH 016/726] drm/i915/gvt: support inconsecutive partial gtt entry write Previously we assumed two 4-byte writes to the same PTE coming in sequence. But recently we observed inconsecutive partial write happening as well. So this patch enhances the previous solution. It now uses a list to save more partial writes. If one partial write can be combined with another one in the list to construct a full PTE, update its shadow entry. Otherwise, save the partial write in the list. v2: invalidate old entry and flush ggtt (Zhenyu) v3: split old ggtt page unmap to another patch (Zhenyu) v4: refine codes (Zhenyu) Signed-off-by: Hang Yuan Cc: Yan Zhao Cc: Xiaolin Zhang Cc: Zhenyu Wang Reviewed-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 99 +++++++++++++++++----------------- drivers/gpu/drm/i915/gvt/gtt.h | 9 +++- 2 files changed, 56 insertions(+), 52 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index c11e353ca904..919de5a1bafb 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -1901,7 +1901,6 @@ static struct intel_vgpu_mm *intel_vgpu_create_ggtt_mm(struct intel_vgpu *vgpu) vgpu_free_mm(mm); return ERR_PTR(-ENOMEM); } - mm->ggtt_mm.last_partial_off = -1UL; return mm; } @@ -1926,7 +1925,6 @@ void _intel_vgpu_mm_release(struct kref *mm_ref) invalidate_ppgtt_mm(mm); } else { vfree(mm->ggtt_mm.virtual_ggtt); - mm->ggtt_mm.last_partial_off = -1UL; } vgpu_free_mm(mm); @@ -2164,6 +2162,8 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, struct intel_gvt_gtt_entry e, m; dma_addr_t dma_addr; int ret; + struct intel_gvt_partial_pte *partial_pte, *pos, *n; + bool partial_update = false; if (bytes != 4 && bytes != 8) return -EINVAL; @@ -2174,68 +2174,57 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off, if (!vgpu_gmadr_is_valid(vgpu, gma)) return 0; - ggtt_get_guest_entry(ggtt_mm, &e, g_gtt_index); - + e.type = GTT_TYPE_GGTT_PTE; memcpy((void *)&e.val64 + (off & (info->gtt_entry_size - 1)), p_data, bytes); /* If ggtt entry size is 8 bytes, and it's split into two 4 bytes - * write, we assume the two 4 bytes writes are consecutive. - * Otherwise, we abort and report error + * write, save the first 4 bytes in a list and update virtual + * PTE. Only update shadow PTE when the second 4 bytes comes. */ if (bytes < info->gtt_entry_size) { - if (ggtt_mm->ggtt_mm.last_partial_off == -1UL) { - /* the first partial part*/ - ggtt_mm->ggtt_mm.last_partial_off = off; - ggtt_mm->ggtt_mm.last_partial_data = e.val64; - return 0; - } else if ((g_gtt_index == - (ggtt_mm->ggtt_mm.last_partial_off >> - info->gtt_entry_size_shift)) && - (off != ggtt_mm->ggtt_mm.last_partial_off)) { - /* the second partial part */ + bool found = false; - int last_off = ggtt_mm->ggtt_mm.last_partial_off & - (info->gtt_entry_size - 1); + list_for_each_entry_safe(pos, n, + &ggtt_mm->ggtt_mm.partial_pte_list, list) { + if (g_gtt_index == pos->offset >> + info->gtt_entry_size_shift) { + if (off != pos->offset) { + /* the second partial part*/ + int last_off = pos->offset & + (info->gtt_entry_size - 1); - memcpy((void *)&e.val64 + last_off, - (void *)&ggtt_mm->ggtt_mm.last_partial_data + - last_off, bytes); + memcpy((void *)&e.val64 + last_off, + (void *)&pos->data + last_off, + bytes); - ggtt_mm->ggtt_mm.last_partial_off = -1UL; - } else { - int last_offset; + list_del(&pos->list); + kfree(pos); + found = true; + break; + } - gvt_vgpu_err("failed to populate guest ggtt entry: abnormal ggtt entry write sequence, last_partial_off=%lx, offset=%x, bytes=%d, ggtt entry size=%d\n", - ggtt_mm->ggtt_mm.last_partial_off, off, - bytes, info->gtt_entry_size); + /* update of the first partial part */ + pos->data = e.val64; + ggtt_set_guest_entry(ggtt_mm, &e, g_gtt_index); + return 0; + } + } - /* set host ggtt entry to scratch page and clear - * virtual ggtt entry as not present for last - * partially write offset - */ - last_offset = ggtt_mm->ggtt_mm.last_partial_off & - (~(info->gtt_entry_size - 1)); - - ggtt_get_host_entry(ggtt_mm, &m, last_offset); - ggtt_invalidate_pte(vgpu, &m); - ops->set_pfn(&m, gvt->gtt.scratch_mfn); - ops->clear_present(&m); - ggtt_set_host_entry(ggtt_mm, &m, last_offset); - ggtt_invalidate(gvt->dev_priv); - - ggtt_get_guest_entry(ggtt_mm, &e, last_offset); - ops->clear_present(&e); - ggtt_set_guest_entry(ggtt_mm, &e, last_offset); - - ggtt_mm->ggtt_mm.last_partial_off = off; - ggtt_mm->ggtt_mm.last_partial_data = e.val64; - - return 0; + if (!found) { + /* the first partial part */ + partial_pte = kzalloc(sizeof(*partial_pte), GFP_KERNEL); + if (!partial_pte) + return -ENOMEM; + partial_pte->offset = off; + partial_pte->data = e.val64; + list_add_tail(&partial_pte->list, + &ggtt_mm->ggtt_mm.partial_pte_list); + partial_update = true; } } - if (ops->test_present(&e)) { + if (!partial_update && (ops->test_present(&e))) { gfn = ops->get_pfn(&e); m = e; @@ -2428,6 +2417,8 @@ int intel_vgpu_init_gtt(struct intel_vgpu *vgpu) intel_vgpu_reset_ggtt(vgpu, false); + INIT_LIST_HEAD(>t->ggtt_mm->ggtt_mm.partial_pte_list); + return create_scratch_page_tree(vgpu); } @@ -2452,6 +2443,14 @@ static void intel_vgpu_destroy_all_ppgtt_mm(struct intel_vgpu *vgpu) static void intel_vgpu_destroy_ggtt_mm(struct intel_vgpu *vgpu) { + struct intel_gvt_partial_pte *pos; + + list_for_each_entry(pos, + &vgpu->gtt.ggtt_mm->ggtt_mm.partial_pte_list, list) { + gvt_dbg_mm("partial PTE update on hold 0x%lx : 0x%llx\n", + pos->offset, pos->data); + kfree(pos); + } intel_vgpu_destroy_mm(vgpu->gtt.ggtt_mm); vgpu->gtt.ggtt_mm = NULL; } diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index 7a9b36176efb..a11bfee1e0c8 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -133,6 +133,12 @@ enum intel_gvt_mm_type { #define GVT_RING_CTX_NR_PDPS GEN8_3LVL_PDPES +struct intel_gvt_partial_pte { + unsigned long offset; + u64 data; + struct list_head list; +}; + struct intel_vgpu_mm { enum intel_gvt_mm_type type; struct intel_vgpu *vgpu; @@ -157,8 +163,7 @@ struct intel_vgpu_mm { } ppgtt_mm; struct { void *virtual_ggtt; - unsigned long last_partial_off; - u64 last_partial_data; + struct list_head partial_pte_list; } ggtt_mm; }; }; From 606a745944bc0ebd14f77dfc61ac7d6cb685cefe Mon Sep 17 00:00:00 2001 From: Xinyun Liu Date: Wed, 19 Sep 2018 15:28:53 +0800 Subject: [PATCH 017/726] drm/i915/gvt: correct mask setting for CSFE_CHICKEN1 CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT conformance check test: [drm:intel_gvt_vgpu_conformance_check] *ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4 Signed-off-by: Xinyun Liu Signed-off-by: Zhi Wang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index e872f4847fbe..088a62ab2bc8 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -144,7 +144,7 @@ static struct engine_mmio gen9_engine_mmio_list[] __cacheline_aligned = { {RCS, GAMT_CHKN_BIT_REG, 0x0, false}, /* 0x4ab8 */ {RCS, GEN9_GAMT_ECO_REG_RW_IA, 0x0, false}, /* 0x4ab0 */ - {RCS, GEN9_CSFE_CHICKEN1_RCS, 0x0, false}, /* 0x20d4 */ + {RCS, GEN9_CSFE_CHICKEN1_RCS, 0xffff, false}, /* 0x20d4 */ {RCS, GEN8_GARBCNTL, 0x0, false}, /* 0xb004 */ {RCS, GEN7_FF_THREAD_MODE, 0x0, false}, /* 0x20a0 */ From 5e7154ff5e8e21dc9acac4f8dba7533552365374 Mon Sep 17 00:00:00 2001 From: Longhe Zheng Date: Tue, 30 Oct 2018 16:12:10 +0800 Subject: [PATCH 018/726] drm/i915/gvt: Handle values of EDP_PSR_IMR and EDP_PSR_IIR GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR and EDP_PSR_IIR registers as default MMIO read/write. So guest won't get expected initial values of these registers when initializing the gpu driver, which results in following warning and logs. -------- Interrupt register 0x64838 is not zero: 0xffffffff WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177 gen3_assert_iir_is_zero+0x38/0xa0 Call Trace: gen8_de_irq_postinstall+0xa7/0x400 gen8_irq_postinstall+0x27/0x80 drm_irq_install+0xbc/0x140 i915_driver_load+0xa9d/0xd50 -------- Because GVT-g does not handle EDP(embedded DP) simulation for guests, always set EDP_PSR_IMR and EDP_PSR_IIR to value 0. Signed-off-by: Longhe Zheng Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 94c1089ecf59..f9002cb1f2a3 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1608,7 +1608,7 @@ static int bxt_gt_disp_pwron_write(struct intel_vgpu *vgpu, return 0; } -static int bxt_edp_psr_imr_iir_write(struct intel_vgpu *vgpu, +static int edp_psr_imr_iir_write(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { vgpu_vreg(vgpu, offset) = 0; @@ -2613,6 +2613,9 @@ static int init_generic_mmio_info(struct intel_gvt *gvt) MMIO_DFH(_MMIO(0x1a178), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(_MMIO(0x1a17c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); MMIO_DFH(_MMIO(0x2217c), D_BDW_PLUS, F_CMD_ACCESS, NULL, NULL); + + MMIO_DH(EDP_PSR_IMR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write); + MMIO_DH(EDP_PSR_IIR, D_BDW_PLUS, NULL, edp_psr_imr_iir_write); return 0; } @@ -3216,9 +3219,6 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt) MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_B), D_BXT); MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_C), D_BXT); - MMIO_DH(EDP_PSR_IMR, D_BXT, NULL, bxt_edp_psr_imr_iir_write); - MMIO_DH(EDP_PSR_IIR, D_BXT, NULL, bxt_edp_psr_imr_iir_write); - MMIO_D(RC6_CTX_BASE, D_BXT); MMIO_D(GEN8_PUSHBUS_CONTROL, D_BXT); From 399474e4c1100bca264ed14fa3ad0d68fab484d8 Mon Sep 17 00:00:00 2001 From: Julian Sax Date: Wed, 24 Oct 2018 22:40:26 +0200 Subject: [PATCH 019/726] HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Reported-by: Tim Aldridge Signed-off-by: Julian Sax Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c index 1d645c9ab417..9ca2fcc48b5a 100644 --- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c @@ -330,6 +330,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = { }, .driver_data = (void *)&sipodev_desc }, + { + .ident = "Direkt-Tek DTLAPY133-1", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"), + }, + .driver_data = (void *)&sipodev_desc + }, { .ident = "Mediacom Flexbook Edge 11", .matches = { From 439cd39ea136d2c026805264d58a91f36b6b64ca Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Sat, 14 Jul 2018 21:59:43 +0200 Subject: [PATCH 020/726] netfilter: ipset: list:set: Decrease refcount synchronously on deletion and replace Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") postponed decreasing set reference counters to the RCU callback. An 'ipset del' command can terminate before the RCU grace period is elapsed, and if sets are listed before then, the reference counter shown in userspace will be wrong: # ipset create h hash:ip; ipset create l list:set; ipset add l # ipset del l h; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 1 Number of entries: 0 Members: # sleep 1; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 0 Number of entries: 0 Members: Fix this by making the reference count update synchronous again. As a result, when sets are listed, ip_set_name_byindex() might now fetch a set whose reference count is already zero. Instead of relying on the reference count to protect against concurrent set renaming, grab ip_set_ref_lock as reader and copy the name, while holding the same lock in ip_set_rename() as writer instead. Reported-by: Li Shuang Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: Stefano Brivio Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set.h | 2 +- net/netfilter/ipset/ip_set_core.c | 23 +++++++++++------------ net/netfilter/ipset/ip_set_list_set.c | 17 +++++++++++------ 3 files changed, 23 insertions(+), 19 deletions(-) diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index 34fc80f3eb90..1d100efe74ec 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -314,7 +314,7 @@ enum { extern ip_set_id_t ip_set_get_byname(struct net *net, const char *name, struct ip_set **set); extern void ip_set_put_byindex(struct net *net, ip_set_id_t index); -extern const char *ip_set_name_byindex(struct net *net, ip_set_id_t index); +extern void ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name); extern ip_set_id_t ip_set_nfnl_get_byindex(struct net *net, ip_set_id_t index); extern void ip_set_nfnl_put(struct net *net, ip_set_id_t index); diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index bc4bd247bb7d..fa15a831aeee 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -693,21 +693,20 @@ ip_set_put_byindex(struct net *net, ip_set_id_t index) EXPORT_SYMBOL_GPL(ip_set_put_byindex); /* Get the name of a set behind a set index. - * We assume the set is referenced, so it does exist and - * can't be destroyed. The set cannot be renamed due to - * the referencing either. - * + * Set itself is protected by RCU, but its name isn't: to protect against + * renaming, grab ip_set_ref_lock as reader (see ip_set_rename()) and copy the + * name. */ -const char * -ip_set_name_byindex(struct net *net, ip_set_id_t index) +void +ip_set_name_byindex(struct net *net, ip_set_id_t index, char *name) { - const struct ip_set *set = ip_set_rcu_get(net, index); + struct ip_set *set = ip_set_rcu_get(net, index); BUG_ON(!set); - BUG_ON(set->ref == 0); - /* Referenced, so it's safe */ - return set->name; + read_lock_bh(&ip_set_ref_lock); + strncpy(name, set->name, IPSET_MAXNAMELEN); + read_unlock_bh(&ip_set_ref_lock); } EXPORT_SYMBOL_GPL(ip_set_name_byindex); @@ -1153,7 +1152,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl, if (!set) return -ENOENT; - read_lock_bh(&ip_set_ref_lock); + write_lock_bh(&ip_set_ref_lock); if (set->ref != 0) { ret = -IPSET_ERR_REFERENCED; goto out; @@ -1170,7 +1169,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl, strncpy(set->name, name2, IPSET_MAXNAMELEN); out: - read_unlock_bh(&ip_set_ref_lock); + write_unlock_bh(&ip_set_ref_lock); return ret; } diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c index 072a658fde04..4eef55da0878 100644 --- a/net/netfilter/ipset/ip_set_list_set.c +++ b/net/netfilter/ipset/ip_set_list_set.c @@ -148,9 +148,7 @@ __list_set_del_rcu(struct rcu_head * rcu) { struct set_elem *e = container_of(rcu, struct set_elem, rcu); struct ip_set *set = e->set; - struct list_set *map = set->data; - ip_set_put_byindex(map->net, e->id); ip_set_ext_destroy(set, e); kfree(e); } @@ -158,15 +156,21 @@ __list_set_del_rcu(struct rcu_head * rcu) static inline void list_set_del(struct ip_set *set, struct set_elem *e) { + struct list_set *map = set->data; + set->elements--; list_del_rcu(&e->list); + ip_set_put_byindex(map->net, e->id); call_rcu(&e->rcu, __list_set_del_rcu); } static inline void -list_set_replace(struct set_elem *e, struct set_elem *old) +list_set_replace(struct ip_set *set, struct set_elem *e, struct set_elem *old) { + struct list_set *map = set->data; + list_replace_rcu(&old->list, &e->list); + ip_set_put_byindex(map->net, old->id); call_rcu(&old->rcu, __list_set_del_rcu); } @@ -298,7 +302,7 @@ list_set_uadd(struct ip_set *set, void *value, const struct ip_set_ext *ext, INIT_LIST_HEAD(&e->list); list_set_init_extensions(set, ext, e); if (n) - list_set_replace(e, n); + list_set_replace(set, e, n); else if (next) list_add_tail_rcu(&e->list, &next->list); else if (prev) @@ -486,6 +490,7 @@ list_set_list(const struct ip_set *set, const struct list_set *map = set->data; struct nlattr *atd, *nested; u32 i = 0, first = cb->args[IPSET_CB_ARG0]; + char name[IPSET_MAXNAMELEN]; struct set_elem *e; int ret = 0; @@ -504,8 +509,8 @@ list_set_list(const struct ip_set *set, nested = ipset_nest_start(skb, IPSET_ATTR_DATA); if (!nested) goto nla_put_failure; - if (nla_put_string(skb, IPSET_ATTR_NAME, - ip_set_name_byindex(map->net, e->id))) + ip_set_name_byindex(map->net, e->id, name); + if (nla_put_string(skb, IPSET_ATTR_NAME, name)) goto nla_put_failure; if (ip_set_put_extensions(skb, set, e, true)) goto nla_put_failure; From 886503f34d63e681662057448819edb5b1057a97 Mon Sep 17 00:00:00 2001 From: Eric Westbrook Date: Tue, 28 Aug 2018 15:14:42 -0600 Subject: [PATCH 021/726] netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c Signed-off-by: Eric Westbrook Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_netportnet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_netportnet.c b/net/netfilter/ipset/ip_set_hash_netportnet.c index d391485a6acd..613e18e720a4 100644 --- a/net/netfilter/ipset/ip_set_hash_netportnet.c +++ b/net/netfilter/ipset/ip_set_hash_netportnet.c @@ -213,13 +213,13 @@ hash_netportnet4_uadt(struct ip_set *set, struct nlattr *tb[], if (tb[IPSET_ATTR_CIDR]) { e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]); - if (!e.cidr[0] || e.cidr[0] > HOST_MASK) + if (e.cidr[0] > HOST_MASK) return -IPSET_ERR_INVALID_CIDR; } if (tb[IPSET_ATTR_CIDR2]) { e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]); - if (!e.cidr[1] || e.cidr[1] > HOST_MASK) + if (e.cidr[1] > HOST_MASK) return -IPSET_ERR_INVALID_CIDR; } @@ -493,13 +493,13 @@ hash_netportnet6_uadt(struct ip_set *set, struct nlattr *tb[], if (tb[IPSET_ATTR_CIDR]) { e.cidr[0] = nla_get_u8(tb[IPSET_ATTR_CIDR]); - if (!e.cidr[0] || e.cidr[0] > HOST_MASK) + if (e.cidr[0] > HOST_MASK) return -IPSET_ERR_INVALID_CIDR; } if (tb[IPSET_ATTR_CIDR2]) { e.cidr[1] = nla_get_u8(tb[IPSET_ATTR_CIDR2]); - if (!e.cidr[1] || e.cidr[1] > HOST_MASK) + if (e.cidr[1] > HOST_MASK) return -IPSET_ERR_INVALID_CIDR; } From ed956f3947a01ff9875cd908d7c1ef1fe7f47bf0 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Mon, 22 Oct 2018 23:30:40 +0200 Subject: [PATCH 022/726] netfilter: ipset: fix ip_set_list allocation failure ip_set_create() and ip_set_net_init() attempt to allocate physically contiguous memory for ip_set_list. If memory is fragmented, the allocations could easily fail: vzctl: page allocation failure: order:7, mode:0xc0d0 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0x110/0x180 __alloc_pages_nodemask+0x7bf/0xc60 alloc_pages_current+0x98/0x110 kmalloc_order+0x18/0x40 kmalloc_order_trace+0x26/0xa0 __kmalloc+0x279/0x290 ip_set_net_init+0x4b/0x90 [ip_set] ops_init+0x3b/0xb0 setup_net+0xbb/0x170 copy_net_ns+0xf1/0x1c0 create_new_namespaces+0xf9/0x180 copy_namespaces+0x8e/0xd0 copy_process+0xb61/0x1a00 do_fork+0x91/0x320 Use kvcalloc() to fallback to 0-order allocations if high order page isn't available. Signed-off-by: Andrey Ryabinin Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index fa15a831aeee..68db946df151 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -960,7 +960,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl, /* Wraparound */ goto cleanup; - list = kcalloc(i, sizeof(struct ip_set *), GFP_KERNEL); + list = kvcalloc(i, sizeof(struct ip_set *), GFP_KERNEL); if (!list) goto cleanup; /* nfnl mutex is held, both lists are valid */ @@ -972,7 +972,7 @@ static int ip_set_create(struct net *net, struct sock *ctnl, /* Use new list */ index = inst->ip_set_max; inst->ip_set_max = i; - kfree(tmp); + kvfree(tmp); ret = 0; } else if (ret) { goto cleanup; @@ -2058,7 +2058,7 @@ ip_set_net_init(struct net *net) if (inst->ip_set_max >= IPSET_INVALID_ID) inst->ip_set_max = IPSET_INVALID_ID - 1; - list = kcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL); + list = kvcalloc(inst->ip_set_max, sizeof(struct ip_set *), GFP_KERNEL); if (!list) return -ENOMEM; inst->is_deleted = false; @@ -2086,7 +2086,7 @@ ip_set_net_exit(struct net *net) } } nfnl_unlock(NFNL_SUBSYS_IPSET); - kfree(rcu_dereference_protected(inst->ip_set_list, 1)); + kvfree(rcu_dereference_protected(inst->ip_set_list, 1)); } static struct pernet_operations ip_set_net_ops = { From 51f5fd2e4615dcdc25cd7f9d19b7b27eb9ecdac7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 31 Oct 2018 17:44:08 +0000 Subject: [PATCH 023/726] tools headers barrier: Fix arm64 tools build failure wrt smp_load_{acquire,release} Cheers for reporting this. I managed to reproduce the build failure with gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1). The code in question is the arm64 versions of smp_load_acquire() and smp_store_release(). Unlike other architectures, these are not built around READ_ONCE() and WRITE_ONCE() since we have instructions we can use instead of fences. Bringing our macros up-to-date with those (i.e. tweaking the union initialisation and using the special "uXX_alias_t" types) appears to fix the issue for me. Committer notes: Testing it in the systems previously failing: # time dm android-ndk:r12b-arm \ android-ndk:r15c-arm \ debian:experimental-x-arm64 \ ubuntu:14.04.4-x-linaro-arm64 \ ubuntu:16.04-x-arm \ ubuntu:16.04-x-arm64 \ ubuntu:18.04-x-arm \ ubuntu:18.04-x-arm64 1 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 2 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 3 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 8.2.0-7) 8.2.0 4 ubuntu:14.04.4-x-linaro-arm64 : Ok aarch64-linux-gnu-gcc (Linaro GCC 5.5-2017.10) 5.5.0 5 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 6 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 7 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04) 7.3.0 8 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04) 7.3.0 Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Will Deacon Tested-by: Arnaldo Carvalho de Melo Tested-by: Daniel Borkmann Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20181031174408.GA27871@arm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/arm64/include/asm/barrier.h | 133 +++++++++++++------------ 1 file changed, 67 insertions(+), 66 deletions(-) diff --git a/tools/arch/arm64/include/asm/barrier.h b/tools/arch/arm64/include/asm/barrier.h index 12835ea0e417..378c051fa177 100644 --- a/tools/arch/arm64/include/asm/barrier.h +++ b/tools/arch/arm64/include/asm/barrier.h @@ -14,74 +14,75 @@ #define wmb() asm volatile("dmb ishst" ::: "memory") #define rmb() asm volatile("dmb ishld" ::: "memory") -#define smp_store_release(p, v) \ -do { \ - union { typeof(*p) __val; char __c[1]; } __u = \ - { .__val = (__force typeof(*p)) (v) }; \ - \ - switch (sizeof(*p)) { \ - case 1: \ - asm volatile ("stlrb %w1, %0" \ - : "=Q" (*p) \ - : "r" (*(__u8 *)__u.__c) \ - : "memory"); \ - break; \ - case 2: \ - asm volatile ("stlrh %w1, %0" \ - : "=Q" (*p) \ - : "r" (*(__u16 *)__u.__c) \ - : "memory"); \ - break; \ - case 4: \ - asm volatile ("stlr %w1, %0" \ - : "=Q" (*p) \ - : "r" (*(__u32 *)__u.__c) \ - : "memory"); \ - break; \ - case 8: \ - asm volatile ("stlr %1, %0" \ - : "=Q" (*p) \ - : "r" (*(__u64 *)__u.__c) \ - : "memory"); \ - break; \ - default: \ - /* Only to shut up gcc ... */ \ - mb(); \ - break; \ - } \ +#define smp_store_release(p, v) \ +do { \ + union { typeof(*p) __val; char __c[1]; } __u = \ + { .__val = (v) }; \ + \ + switch (sizeof(*p)) { \ + case 1: \ + asm volatile ("stlrb %w1, %0" \ + : "=Q" (*p) \ + : "r" (*(__u8_alias_t *)__u.__c) \ + : "memory"); \ + break; \ + case 2: \ + asm volatile ("stlrh %w1, %0" \ + : "=Q" (*p) \ + : "r" (*(__u16_alias_t *)__u.__c) \ + : "memory"); \ + break; \ + case 4: \ + asm volatile ("stlr %w1, %0" \ + : "=Q" (*p) \ + : "r" (*(__u32_alias_t *)__u.__c) \ + : "memory"); \ + break; \ + case 8: \ + asm volatile ("stlr %1, %0" \ + : "=Q" (*p) \ + : "r" (*(__u64_alias_t *)__u.__c) \ + : "memory"); \ + break; \ + default: \ + /* Only to shut up gcc ... */ \ + mb(); \ + break; \ + } \ } while (0) -#define smp_load_acquire(p) \ -({ \ - union { typeof(*p) __val; char __c[1]; } __u; \ - \ - switch (sizeof(*p)) { \ - case 1: \ - asm volatile ("ldarb %w0, %1" \ - : "=r" (*(__u8 *)__u.__c) \ - : "Q" (*p) : "memory"); \ - break; \ - case 2: \ - asm volatile ("ldarh %w0, %1" \ - : "=r" (*(__u16 *)__u.__c) \ - : "Q" (*p) : "memory"); \ - break; \ - case 4: \ - asm volatile ("ldar %w0, %1" \ - : "=r" (*(__u32 *)__u.__c) \ - : "Q" (*p) : "memory"); \ - break; \ - case 8: \ - asm volatile ("ldar %0, %1" \ - : "=r" (*(__u64 *)__u.__c) \ - : "Q" (*p) : "memory"); \ - break; \ - default: \ - /* Only to shut up gcc ... */ \ - mb(); \ - break; \ - } \ - __u.__val; \ +#define smp_load_acquire(p) \ +({ \ + union { typeof(*p) __val; char __c[1]; } __u = \ + { .__c = { 0 } }; \ + \ + switch (sizeof(*p)) { \ + case 1: \ + asm volatile ("ldarb %w0, %1" \ + : "=r" (*(__u8_alias_t *)__u.__c) \ + : "Q" (*p) : "memory"); \ + break; \ + case 2: \ + asm volatile ("ldarh %w0, %1" \ + : "=r" (*(__u16_alias_t *)__u.__c) \ + : "Q" (*p) : "memory"); \ + break; \ + case 4: \ + asm volatile ("ldar %w0, %1" \ + : "=r" (*(__u32_alias_t *)__u.__c) \ + : "Q" (*p) : "memory"); \ + break; \ + case 8: \ + asm volatile ("ldar %0, %1" \ + : "=r" (*(__u64_alias_t *)__u.__c) \ + : "Q" (*p) : "memory"); \ + break; \ + default: \ + /* Only to shut up gcc ... */ \ + mb(); \ + break; \ + } \ + __u.__val; \ }) #endif /* _TOOLS_LINUX_ASM_AARCH64_BARRIER_H */ From febf8a3712e4209b7e650b37b3b240a2b387794d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 1 Nov 2018 10:34:34 -0300 Subject: [PATCH 024/726] perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit} The previous approach of attaching to each syscall showed how it is possible to augment tracepoints and use that augmentation, pointer payloads, in the existing beautifiers in 'perf trace', but for a more general solution we now will try to augment the main raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in maps so that it knows which syscalls and which pointer contents, and how many bytes for each of the arguments should be copied. Start with just the bare minimum to collect what is provided by those two tracepoints via the __augmented_syscalls__ map + bpf-output perf event, which results in perf trace showing them without connecting enter+exit: # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1 0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0 0.019 ( ): sleep/11563 brk() ... 0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504 0.033 ( ): sleep/11563 access(filename:, mode: R) ... 0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2 0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ... 0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3 0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ... 0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0 0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ... 0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248 0.050 ( ): sleep/11563 close(fd: 3) ... 0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0 0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ... 0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3 0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ... 0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832 0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ... 0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0 0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ... 0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056 0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ... 0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936 0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ... 0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0 0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ... 0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176 0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ... 0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752 0.097 ( ): sleep/11563 close(fd: 3) ... 0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0 0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ... 0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0 0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ... 0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0 0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ... 0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0 0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ... 0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0 0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ... 0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0 0.216 ( ): sleep/11563 brk() ... 0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504 0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ... 0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672 0.220 ( ): sleep/11563 brk() ... 0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672 0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ... 0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3 0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ... 0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0 0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ... 0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432 0.237 ( ): sleep/11563 close(fd: 3) ... 0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0 0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ... 1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0 1000.440 ( ): sleep/11563 close(fd: 1) ... 1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0 1000.454 ( ): sleep/11563 close(fd: 2) ... 1000.468 ( ): sleep/11563 exit_group( ) # In the next csets we'll connect those events to the existing enter/exit raw_syscalls handlers in 'perf trace', just like we did with the syscalls:sys_{enter,exit}_* tracepoints. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- .../examples/bpf/augmented_raw_syscalls.c | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 tools/perf/examples/bpf/augmented_raw_syscalls.c diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c new file mode 100644 index 000000000000..cde91c34b101 --- /dev/null +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Augment the raw_syscalls tracepoints with the contents of the pointer arguments. + * + * Test it with: + * + * perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c cat /etc/passwd > /dev/null + * + * This exactly matches what is marshalled into the raw_syscall:sys_enter + * payload expected by the 'perf trace' beautifiers. + * + * For now it just uses the existing tracepoint augmentation code in 'perf + * trace', in the next csets we'll hook up these with the sys_enter/sys_exit + * code that will combine entry/exit in a strace like way. + */ + +#include +#include + +/* bpf-output associated map */ +struct bpf_map SEC("maps") __augmented_syscalls__ = { + .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY, + .key_size = sizeof(int), + .value_size = sizeof(u32), + .max_entries = __NR_CPUS__, +}; + +struct syscall_enter_args { + unsigned long long common_tp_fields; + long syscall_nr; + unsigned long args[6]; +}; + +struct syscall_exit_args { + unsigned long long common_tp_fields; + long syscall_nr; + long ret; +}; + +SEC("raw_syscalls:sys_enter") +int sys_enter(struct syscall_enter_args *args) +{ + struct { + struct syscall_enter_args args; + } augmented_args; + unsigned int len = sizeof(augmented_args); + + probe_read(&augmented_args.args, sizeof(augmented_args.args), args); + perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len); + return 0; +} + +SEC("raw_syscalls:sys_exit") +int sys_exit(struct syscall_exit_args *args) +{ + return 1; /* 0 as soon as we start copying data returned by the kernel, e.g. 'read' */ +} + +license(GPL); From 3c5e3dabf3722a883227623a4adf61976c2224ff Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 1 Nov 2018 13:50:35 -0300 Subject: [PATCH 025/726] perf trace: When augmenting raw_syscalls plug raw_syscalls:sys_exit too With just this commit we get to support all syscalls via hooking raw_syscalls:sys_{enter,exit} to the trace__sys_{enter,exit} routines to combine, strace-like, those tracepoints. # trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1 ? ( ): sleep/31680 ... [continued]: execve()) = 0 0.043 ( 0.004 ms): sleep/31680 brk() = 0x55652a851000 0.070 ( 0.009 ms): sleep/31680 access(filename:, mode: R) = -1 ENOENT No such file or directory 0.087 ( 0.006 ms): sleep/31680 openat(dfd: CWD, filename: , flags: CLOEXEC) = 3 0.096 ( 0.003 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7ffc5269e190) = 0 0.101 ( 0.005 ms): sleep/31680 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) = 0x7f709c239000 0.109 ( 0.002 ms): sleep/31680 close(fd: 3) = 0 0.126 ( 0.006 ms): sleep/31680 openat(dfd: CWD, filename: , flags: CLOEXEC) = 3 0.135 ( 0.003 ms): sleep/31680 read(fd: 3, buf: 0x7ffc5269e358, count: 832) = 832 0.141 ( 0.002 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7ffc5269e1f0) = 0 0.146 ( 0.005 ms): sleep/31680 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7f709c237000 0.159 ( 0.007 ms): sleep/31680 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7f709bc79000 0.168 ( 0.009 ms): sleep/31680 mprotect(start: 0x7f709be26000, len: 2093056) = 0 0.179 ( 0.010 ms): sleep/31680 mmap(addr: 0x7f709c025000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) = 0x7f709c025000 0.196 ( 0.005 ms): sleep/31680 mmap(addr: 0x7f709c02b000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7f709c02b000 0.210 ( 0.002 ms): sleep/31680 close(fd: 3) = 0 0.230 ( 0.002 ms): sleep/31680 arch_prctl(option: 4098, arg2: 140121632638208) = 0 0.306 ( 0.009 ms): sleep/31680 mprotect(start: 0x7f709c025000, len: 16384, prot: READ) = 0 0.338 ( 0.005 ms): sleep/31680 mprotect(start: 0x556529607000, len: 4096, prot: READ) = 0 0.348 ( 0.005 ms): sleep/31680 mprotect(start: 0x7f709c253000, len: 4096, prot: READ) = 0 0.356 ( 0.019 ms): sleep/31680 munmap(addr: 0x7f709c239000, len: 103334) = 0 0.463 ( 0.002 ms): sleep/31680 brk() = 0x55652a851000 0.468 ( 0.004 ms): sleep/31680 brk(brk: 0x55652a872000) = 0x55652a872000 0.474 ( 0.002 ms): sleep/31680 brk() = 0x55652a872000 0.484 ( 0.008 ms): sleep/31680 open(filename: , flags: CLOEXEC) = 3 0.497 ( 0.002 ms): sleep/31680 fstat(fd: 3, statbuf: 0x7f709c02aaa0) = 0 0.501 ( 0.006 ms): sleep/31680 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7f70950aa000 0.514 ( 0.002 ms): sleep/31680 close(fd: 3) = 0 0.554 (1000.140 ms): sleep/31680 nanosleep(rqtp: 0x7ffc5269eed0) = 0 1000.734 ( 0.007 ms): sleep/31680 close(fd: 1) = 0 1000.748 ( 0.004 ms): sleep/31680 close(fd: 2) = 0 1000.769 ( ): sleep/31680 exit_group() # Now to allow selecting which syscalls should be traced, using a map. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-votqqmqhag8e1i9mgyzfez3o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index dc8a6c4986ce..f582ca575883 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -3501,7 +3501,8 @@ int cmd_trace(int argc, const char **argv) evsel->handler = trace__sys_enter; evlist__for_each_entry(trace.evlist, evsel) { - if (strstarts(perf_evsel__name(evsel), "syscalls:sys_exit_")) { + if (strstarts(perf_evsel__name(evsel), "syscalls:sys_exit_") || + strcmp(perf_evsel__name(evsel), "raw_syscalls:sys_exit") == 0) { perf_evsel__init_augmented_syscall_tp(evsel); perf_evsel__init_augmented_syscall_tp_ret(evsel); evsel->handler = trace__sys_exit; From 7de414a9dd91426318df7b63da024b2b07e53df5 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 1 Nov 2018 12:02:37 -0700 Subject: [PATCH 026/726] net: drop skb on failure in ip_check_defrag() Most callers of pskb_trim_rcsum() simply drop the skb when it fails, however, ip_check_defrag() still continues to pass the skb up to stack. This is suspicious. In ip_check_defrag(), after we learn the skb is an IP fragment, passing the skb to callers makes no sense, because callers expect fragments are defrag'ed on success. So, dropping the skb when we can't defrag it is reasonable. Note, prior to commit 88078d98d1bb, this is not a big problem as checksum will be fixed up anyway. After it, the checksum is not correct on failure. Found this during code review. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_fragment.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 9b0158fa431f..d6ee343fdb86 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -722,10 +722,14 @@ struct sk_buff *ip_check_defrag(struct net *net, struct sk_buff *skb, u32 user) if (ip_is_fragment(&iph)) { skb = skb_share_check(skb, GFP_ATOMIC); if (skb) { - if (!pskb_may_pull(skb, netoff + iph.ihl * 4)) - return skb; - if (pskb_trim_rcsum(skb, netoff + len)) - return skb; + if (!pskb_may_pull(skb, netoff + iph.ihl * 4)) { + kfree_skb(skb); + return NULL; + } + if (pskb_trim_rcsum(skb, netoff + len)) { + kfree_skb(skb); + return NULL; + } memset(IPCB(skb), 0, sizeof(struct inet_skb_parm)); if (ip_defrag(net, skb, user)) return NULL; From a8874e7e8a8896f2b6c641f4b8e2473eafd35204 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 31 Oct 2018 12:11:48 +0100 Subject: [PATCH 027/726] mm: make the __PAGETABLE_PxD_FOLDED defines non-empty Change the currently empty defines for __PAGETABLE_PMD_FOLDED, __PAGETABLE_PUD_FOLDED and __PAGETABLE_P4D_FOLDED to return 1. This makes it possible to use __is_defined() to test if the preprocessor define exists. Acked-by: Kirill A. Shutemov Signed-off-by: Martin Schwidefsky --- arch/arm/include/asm/pgtable-2level.h | 2 +- arch/m68k/include/asm/pgtable_mm.h | 4 ++-- arch/microblaze/include/asm/pgtable.h | 2 +- arch/nds32/include/asm/pgtable.h | 2 +- arch/parisc/include/asm/pgtable.h | 2 +- include/asm-generic/4level-fixup.h | 2 +- include/asm-generic/5level-fixup.h | 2 +- include/asm-generic/pgtable-nop4d-hack.h | 2 +- include/asm-generic/pgtable-nop4d.h | 2 +- include/asm-generic/pgtable-nopmd.h | 2 +- include/asm-generic/pgtable-nopud.h | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 92fd2c8a9af0..12659ce5c1f3 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -10,7 +10,7 @@ #ifndef _ASM_PGTABLE_2LEVEL_H #define _ASM_PGTABLE_2LEVEL_H -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 /* * Hardware-wise, we have a two level page table structure, where the first diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 6181e4134483..fe3ddd73a0cc 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -55,12 +55,12 @@ */ #ifdef CONFIG_SUN3 #define PTRS_PER_PTE 16 -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 2048 #elif defined(CONFIG_COLDFIRE) #define PTRS_PER_PTE 512 -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 1024 #else diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index f64ebb9c9a41..e14b6621c933 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -63,7 +63,7 @@ extern int mem_init_done; #include -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h index d3e19a55cf53..9f52db930c00 100644 --- a/arch/nds32/include/asm/pgtable.h +++ b/arch/nds32/include/asm/pgtable.h @@ -4,7 +4,7 @@ #ifndef _ASMNDS32_PGTABLE_H #define _ASMNDS32_PGTABLE_H -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 #include #include diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index b941ac7d4e70..c7bb74e22436 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -111,7 +111,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) #if CONFIG_PGTABLE_LEVELS == 3 #define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY) #else -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 #define BITS_PER_PMD 0 #endif #define PTRS_PER_PMD (1UL << BITS_PER_PMD) diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h index 89f3b03b1445..e3667c9a33a5 100644 --- a/include/asm-generic/4level-fixup.h +++ b/include/asm-generic/4level-fixup.h @@ -3,7 +3,7 @@ #define _4LEVEL_FIXUP_H #define __ARCH_HAS_4LEVEL_HACK -#define __PAGETABLE_PUD_FOLDED +#define __PAGETABLE_PUD_FOLDED 1 #define PUD_SHIFT PGDIR_SHIFT #define PUD_SIZE PGDIR_SIZE diff --git a/include/asm-generic/5level-fixup.h b/include/asm-generic/5level-fixup.h index 9c2e0708eb82..73474bb52344 100644 --- a/include/asm-generic/5level-fixup.h +++ b/include/asm-generic/5level-fixup.h @@ -3,7 +3,7 @@ #define _5LEVEL_FIXUP_H #define __ARCH_HAS_5LEVEL_HACK -#define __PAGETABLE_P4D_FOLDED +#define __PAGETABLE_P4D_FOLDED 1 #define P4D_SHIFT PGDIR_SHIFT #define P4D_SIZE PGDIR_SIZE diff --git a/include/asm-generic/pgtable-nop4d-hack.h b/include/asm-generic/pgtable-nop4d-hack.h index 0c34215263b8..1d6dd38c0e5e 100644 --- a/include/asm-generic/pgtable-nop4d-hack.h +++ b/include/asm-generic/pgtable-nop4d-hack.h @@ -5,7 +5,7 @@ #ifndef __ASSEMBLY__ #include -#define __PAGETABLE_PUD_FOLDED +#define __PAGETABLE_PUD_FOLDED 1 /* * Having the pud type consist of a pgd gets the size right, and allows diff --git a/include/asm-generic/pgtable-nop4d.h b/include/asm-generic/pgtable-nop4d.h index 1a29b2a0282b..04cb913797bc 100644 --- a/include/asm-generic/pgtable-nop4d.h +++ b/include/asm-generic/pgtable-nop4d.h @@ -4,7 +4,7 @@ #ifndef __ASSEMBLY__ -#define __PAGETABLE_P4D_FOLDED +#define __PAGETABLE_P4D_FOLDED 1 typedef struct { pgd_t pgd; } p4d_t; diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h index f35f6e8149e4..b85b8271a73d 100644 --- a/include/asm-generic/pgtable-nopmd.h +++ b/include/asm-generic/pgtable-nopmd.h @@ -8,7 +8,7 @@ struct mm_struct; -#define __PAGETABLE_PMD_FOLDED +#define __PAGETABLE_PMD_FOLDED 1 /* * Having the pmd type consist of a pud gets the size right, and allows diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h index e950b9c50f34..9bef475db6fe 100644 --- a/include/asm-generic/pgtable-nopud.h +++ b/include/asm-generic/pgtable-nopud.h @@ -9,7 +9,7 @@ #else #include -#define __PAGETABLE_PUD_FOLDED +#define __PAGETABLE_PUD_FOLDED 1 /* * Having the pud type consist of a p4d gets the size right, and allows From 1071fc5779d9846fec56a4ff6089ab08cac1ab72 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 15 Oct 2018 10:25:57 +0200 Subject: [PATCH 028/726] mm: introduce mm_[p4d|pud|pmd]_folded Add three architecture overrideable functions to test if the p4d, pud, or pmd layer of a page table is folded or not. Acked-by: Kirill A. Shutemov Signed-off-by: Martin Schwidefsky --- include/asm-generic/pgtable.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 88ebc6102c7c..15fd0277ffa6 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -1127,4 +1127,20 @@ static inline bool arch_has_pfn_modify_check(void) #endif #endif +/* + * On some architectures it depends on the mm if the p4d/pud or pmd + * layer of the page table hierarchy is folded or not. + */ +#ifndef mm_p4d_folded +#define mm_p4d_folded(mm) __is_defined(__PAGETABLE_P4D_FOLDED) +#endif + +#ifndef mm_pud_folded +#define mm_pud_folded(mm) __is_defined(__PAGETABLE_PUD_FOLDED) +#endif + +#ifndef mm_pmd_folded +#define mm_pmd_folded(mm) __is_defined(__PAGETABLE_PMD_FOLDED) +#endif + #endif /* _ASM_GENERIC_PGTABLE_H */ From 6d212db11947ae5464e4717536ed9faf61c01e86 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 15 Oct 2018 10:30:23 +0200 Subject: [PATCH 029/726] mm: add mm_pxd_folded checks to pgtable_bytes accounting functions The common mm code calls mm_dec_nr_pmds() and mm_dec_nr_puds() in free_pgtables() if the address range spans a full pud or pmd. If mm_dec_nr_puds/mm_dec_nr_pmds are non-empty due to configuration settings they blindly subtract the size of the pmd or pud table from pgtable_bytes even if the pud or pmd page table layer is folded. Add explicit mm_[pmd|pud]_folded checks to the four pgtable_bytes accounting functions mm_inc_nr_puds, mm_inc_nr_pmds, mm_dec_nr_puds and mm_dec_nr_pmds. As the check for folded page tables can be overwritten by the architecture, this allows to keep a correct pgtable_bytes value for platforms that use a dynamic number of page table levels. Acked-by: Kirill A. Shutemov Signed-off-by: Martin Schwidefsky --- include/linux/mm.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/linux/mm.h b/include/linux/mm.h index daa2b8f1e9a8..a3701e91bb57 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1742,11 +1742,15 @@ int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address); static inline void mm_inc_nr_puds(struct mm_struct *mm) { + if (mm_pud_folded(mm)) + return; atomic_long_add(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes); } static inline void mm_dec_nr_puds(struct mm_struct *mm) { + if (mm_pud_folded(mm)) + return; atomic_long_sub(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes); } #endif @@ -1766,11 +1770,15 @@ int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address); static inline void mm_inc_nr_pmds(struct mm_struct *mm) { + if (mm_pmd_folded(mm)) + return; atomic_long_add(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes); } static inline void mm_dec_nr_pmds(struct mm_struct *mm) { + if (mm_pmd_folded(mm)) + return; atomic_long_sub(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes); } #endif From e12e4044aede97974f2222eb7f0ed726a5179a32 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 15 Oct 2018 11:09:16 +0200 Subject: [PATCH 030/726] s390/mm: fix mis-accounting of pgtable_bytes In case a fork or a clone system fails in copy_process and the error handling does the mmput() at the bad_fork_cleanup_mm label, the following warning messages will appear on the console: BUG: non-zero pgtables_bytes on freeing mm: 16384 The reason for that is the tricks we play with mm_inc_nr_puds() and mm_inc_nr_pmds() in init_new_context(). A normal 64-bit process has 3 levels of page table, the p4d level and the pud level are folded. On process termination the free_pud_range() function in mm/memory.c will subtract 16KB from pgtable_bytes with a mm_dec_nr_puds() call, but there actually is not really a pud table. One issue with this is the fact that pgtable_bytes is usually off by a few kilobytes, but the more severe problem is that for a failed fork or clone the free_pgtables() function is not called. In this case there is no mm_dec_nr_puds() or mm_dec_nr_pmds() that go together with the mm_inc_nr_puds() and mm_inc_nr_pmds in init_new_context(). The pgtable_bytes will be off by 16384 or 32768 bytes and we get the BUG message. The message itself is purely cosmetic, but annoying. To fix this override the mm_pmd_folded, mm_pud_folded and mm_p4d_folded function to check for the true size of the address space. Reported-by: Li Wang Tested-by: Li Wang Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/mmu_context.h | 5 ----- arch/s390/include/asm/pgalloc.h | 6 +++--- arch/s390/include/asm/pgtable.h | 18 ++++++++++++++++++ arch/s390/include/asm/tlb.h | 6 +++--- arch/s390/mm/pgalloc.c | 1 + 5 files changed, 25 insertions(+), 11 deletions(-) diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index dbd689d556ce..ccbb53e22024 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -46,8 +46,6 @@ static inline int init_new_context(struct task_struct *tsk, mm->context.asce_limit = STACK_TOP_MAX; mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | _ASCE_USER_BITS | _ASCE_TYPE_REGION3; - /* pgd_alloc() did not account this pud */ - mm_inc_nr_puds(mm); break; case -PAGE_SIZE: /* forked 5-level task, set new asce with new_mm->pgd */ @@ -63,9 +61,6 @@ static inline int init_new_context(struct task_struct *tsk, /* forked 2-level compat task, set new asce with new mm->pgd */ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT; - /* pgd_alloc() did not account this pmd */ - mm_inc_nr_pmds(mm); - mm_inc_nr_puds(mm); } crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); return 0; diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index f0f9bcf94c03..5ee733720a57 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -36,11 +36,11 @@ static inline void crst_table_init(unsigned long *crst, unsigned long entry) static inline unsigned long pgd_entry_type(struct mm_struct *mm) { - if (mm->context.asce_limit <= _REGION3_SIZE) + if (mm_pmd_folded(mm)) return _SEGMENT_ENTRY_EMPTY; - if (mm->context.asce_limit <= _REGION2_SIZE) + if (mm_pud_folded(mm)) return _REGION3_ENTRY_EMPTY; - if (mm->context.asce_limit <= _REGION1_SIZE) + if (mm_p4d_folded(mm)) return _REGION2_ENTRY_EMPTY; return _REGION1_ENTRY_EMPTY; } diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 411d435e7a7d..063732414dfb 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -493,6 +493,24 @@ static inline int is_module_addr(void *addr) _REGION_ENTRY_PROTECT | \ _REGION_ENTRY_NOEXEC) +static inline bool mm_p4d_folded(struct mm_struct *mm) +{ + return mm->context.asce_limit <= _REGION1_SIZE; +} +#define mm_p4d_folded(mm) mm_p4d_folded(mm) + +static inline bool mm_pud_folded(struct mm_struct *mm) +{ + return mm->context.asce_limit <= _REGION2_SIZE; +} +#define mm_pud_folded(mm) mm_pud_folded(mm) + +static inline bool mm_pmd_folded(struct mm_struct *mm) +{ + return mm->context.asce_limit <= _REGION3_SIZE; +} +#define mm_pmd_folded(mm) mm_pmd_folded(mm) + static inline int mm_has_pgste(struct mm_struct *mm) { #ifdef CONFIG_PGSTE diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 457b7ba0fbb6..b31c779cf581 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -136,7 +136,7 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, unsigned long address) { - if (tlb->mm->context.asce_limit <= _REGION3_SIZE) + if (mm_pmd_folded(tlb->mm)) return; pgtable_pmd_page_dtor(virt_to_page(pmd)); tlb_remove_table(tlb, pmd); @@ -152,7 +152,7 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d, unsigned long address) { - if (tlb->mm->context.asce_limit <= _REGION1_SIZE) + if (mm_p4d_folded(tlb->mm)) return; tlb_remove_table(tlb, p4d); } @@ -167,7 +167,7 @@ static inline void p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d, static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, unsigned long address) { - if (tlb->mm->context.asce_limit <= _REGION2_SIZE) + if (mm_pud_folded(tlb->mm)) return; tlb_remove_table(tlb, pud); } diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index 76d89ee8b428..814f26520aa2 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -101,6 +101,7 @@ int crst_table_upgrade(struct mm_struct *mm, unsigned long end) mm->context.asce_limit = _REGION1_SIZE; mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH | _ASCE_USER_BITS | _ASCE_TYPE_REGION2; + mm_inc_nr_puds(mm); } else { crst_table_init(table, _REGION1_ENTRY_EMPTY); pgd_populate(mm, (pgd_t *) table, (p4d_t *) pgd); From c43e1c5a801fdde1aad0a2f9ed948753b5275d56 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Thu, 25 Oct 2018 09:04:05 +0100 Subject: [PATCH 031/726] s390/cpum_sf: Rework attribute definition for diagnostic sampling Previously, the attribute entry for diagnostic sampling was added if authorized. Otherwise, the array of struct attribute contains two NULL values. Change this logic and reserve space for the attribute for diagnostic sampling. If diagnostic sampling is authorized, add an entry in the respective position in the array of struct attribute. Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Suggested-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/perf_cpum_sf.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c index 7bf604ff50a1..bfabeb1889cc 100644 --- a/arch/s390/kernel/perf_cpum_sf.c +++ b/arch/s390/kernel/perf_cpum_sf.c @@ -1842,10 +1842,30 @@ static void cpumsf_pmu_del(struct perf_event *event, int flags) CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF); CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG); -static struct attribute *cpumsf_pmu_events_attr[] = { - CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC), - NULL, - NULL, +/* Attribute list for CPU_SF. + * + * The availablitiy depends on the CPU_MF sampling facility authorization + * for basic + diagnositic samples. This is determined at initialization + * time by the sampling facility device driver. + * If the authorization for basic samples is turned off, it should be + * also turned off for diagnostic sampling. + * + * During initialization of the device driver, check the authorization + * level for diagnostic sampling and installs the attribute + * file for diagnostic sampling if necessary. + * + * For now install a placeholder to reference all possible attributes: + * SF_CYCLES_BASIC and SF_CYCLES_BASIC_DIAG. + * Add another entry for the final NULL pointer. + */ +enum { + SF_CYCLES_BASIC_ATTR_IDX = 0, + SF_CYCLES_BASIC_DIAG_ATTR_IDX, + SF_CYCLES_ATTR_MAX +}; + +static struct attribute *cpumsf_pmu_events_attr[SF_CYCLES_ATTR_MAX + 1] = { + [SF_CYCLES_BASIC_ATTR_IDX] = CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC) }; PMU_FORMAT_ATTR(event, "config:0-63"); @@ -2040,7 +2060,10 @@ static int __init init_cpum_sampling_pmu(void) if (si.ad) { sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); - cpumsf_pmu_events_attr[1] = + /* Sampling of diagnostic data authorized, + * install event into attribute list of PMU device. + */ + cpumsf_pmu_events_attr[SF_CYCLES_BASIC_DIAG_ATTR_IDX] = CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG); } From 9fed920e6817218ad786c3f28e14b4c877cc2aed Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 26 Oct 2018 15:29:59 +0200 Subject: [PATCH 032/726] s390/kasan: increase instrumented stack size to 64k Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky --- arch/s390/Makefile | 2 +- arch/s390/include/asm/thread_info.h | 2 +- arch/s390/kernel/entry.S | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 0b33577932c3..e21053e5e0da 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -27,7 +27,7 @@ KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-option,-ffreestanding) KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g) KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,)) UTS_MACHINE := s390x -STACK_SIZE := $(if $(CONFIG_KASAN),32768,16384) +STACK_SIZE := $(if $(CONFIG_KASAN),65536,16384) CHECKFLAGS += -D__s390__ -D__s390x__ export LD_BFD diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 27248f42a03c..ce4e17c9aad6 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -14,7 +14,7 @@ * General size of kernel stacks */ #ifdef CONFIG_KASAN -#define THREAD_SIZE_ORDER 3 +#define THREAD_SIZE_ORDER 4 #else #define THREAD_SIZE_ORDER 2 #endif diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 724fba4d09d2..39191a0feed1 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -236,10 +236,10 @@ ENTRY(__switch_to) stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task lghi %r4,__TASK_stack lghi %r1,__TASK_thread - lg %r5,0(%r4,%r3) # start of kernel stack of next + llill %r5,STACK_INIT stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev - lgr %r15,%r5 - aghi %r15,STACK_INIT # end of kernel stack of next + lg %r15,0(%r4,%r3) # start of kernel stack of next + agr %r15,%r5 # end of kernel stack of next stg %r3,__LC_CURRENT # store task struct of next stg %r15,__LC_KERNEL_STACK # store end of kernel stack lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next From a541f0ebcc08ed8bc0cc492eec9a86cb280a9f24 Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Wed, 31 Oct 2018 13:02:03 -0500 Subject: [PATCH 033/726] s390/mm: Fix ERROR: "__node_distance" undefined! Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by: Justin M. Forbes Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/numa/numa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/numa/numa.c b/arch/s390/numa/numa.c index 5bd374491f94..6c151b42e65d 100644 --- a/arch/s390/numa/numa.c +++ b/arch/s390/numa/numa.c @@ -54,6 +54,7 @@ int __node_distance(int a, int b) { return mode->distance ? mode->distance(a, b) : 0; } +EXPORT_SYMBOL(__node_distance); int numa_debug_enabled; From dafb7f9aef2fd44991ff1691721ff765a23be27b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 2 Nov 2018 06:36:32 -0400 Subject: [PATCH 034/726] v4l2-controls: add a missing include As warned by "make headers_check", the definition for the linux-specific integer types is missing: ./usr/include/linux/v4l2-controls.h:1105: found __[us]{8,16,32,64} type without #include Fixes: c27bb30e7b6d ("media: v4l: Add definitions for MPEG-2 slice format and metadata") Reported-by: Linus Torvalds Reported-by: Stephen Rothwell Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-controls.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 51b095898f4b..86a54916206f 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -47,6 +47,8 @@ * videodev2.h. */ +#include + #ifndef __LINUX_V4L2_CONTROLS_H #define __LINUX_V4L2_CONTROLS_H From f9005571701920551bcf54a500973fb61f2e1eda Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 31 Oct 2018 16:11:49 -0700 Subject: [PATCH 035/726] CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). Cc: # 4.12 Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by: Stefano Stabellini Reviewed-by: Juergen Gross CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by: Juergen Gross --- include/xen/xen-ops.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 18803ff76e27..4969817124a8 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -42,16 +42,12 @@ int xen_setup_shutdown_event(void); extern unsigned long *xen_contiguous_bitmap; -#ifdef CONFIG_XEN_PV +#if defined(CONFIG_XEN_PV) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, unsigned int address_bits, dma_addr_t *dma_handle); void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order); - -int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, - xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, - unsigned int domid, bool no_translate, struct page **pages); #else static inline int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, @@ -63,7 +59,13 @@ static inline int xen_create_contiguous_region(phys_addr_t pstart, static inline void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) { } +#endif +#if defined(CONFIG_XEN_PV) +int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, + xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, + unsigned int domid, bool no_translate, struct page **pages); +#else static inline int xen_remap_pfn(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *pfn, int nr, int *err_ptr, pgprot_t prot, unsigned int domid, From df0734702a7cbba49d6765bd5ba069340bf9c5db Mon Sep 17 00:00:00 2001 From: Song Liu Date: Fri, 2 Nov 2018 10:16:15 -0700 Subject: [PATCH 036/726] bpf: show real jited prog address in /proc/kallsyms Currently, /proc/kallsyms shows page address of jited bpf program. The main reason here is to not expose randomized start address. However, This is not ideal for detailed profiling (find hot instructions from stack traces). This patch replaces the page address with real prog start address. This change is OK because these addresses are still protected by sysctl kptr_restrict (see kallsyms_show_value()), and only programs loaded by root are added to kallsyms (see bpf_prog_kallsyms_add()). Signed-off-by: Song Liu Signed-off-by: Daniel Borkmann --- kernel/bpf/core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 6377225b2082..1a796e0799ec 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -553,7 +553,6 @@ bool is_bpf_text_address(unsigned long addr) int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type, char *sym) { - unsigned long symbol_start, symbol_end; struct bpf_prog_aux *aux; unsigned int it = 0; int ret = -ERANGE; @@ -566,10 +565,9 @@ int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type, if (it++ != symnum) continue; - bpf_get_prog_addr_region(aux->prog, &symbol_start, &symbol_end); bpf_get_prog_name(aux->prog, sym); - *value = symbol_start; + *value = (unsigned long)aux->prog->bpf_func; *type = BPF_SYM_ELF_TYPE; ret = 0; From de57e99ceb65d0d7775cc14a8ba5931d7de1d708 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Fri, 2 Nov 2018 10:16:16 -0700 Subject: [PATCH 037/726] bpf: show real jited address in bpf_prog_info->jited_ksyms Currently, jited_ksyms in bpf_prog_info shows page addresses of jited bpf program. The main reason here is to not expose randomized start address. However, this is not ideal for detailed profiling (find hot instructions from stack traces). This patch replaces the page address with real prog start address. This change is OK because bpf_prog_get_info_by_fd() is only available to root. Signed-off-by: Song Liu Signed-off-by: Daniel Borkmann --- kernel/bpf/syscall.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index ccb93277aae2..34a9eef5992c 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -2172,7 +2172,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, user_ksyms = u64_to_user_ptr(info.jited_ksyms); for (i = 0; i < ulen; i++) { ksym_addr = (ulong) prog->aux->func[i]->bpf_func; - ksym_addr &= PAGE_MASK; if (put_user((u64) ksym_addr, &user_ksyms[i])) return -EFAULT; } From ff1889fc531f582f902175c0acc80321af540b24 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Fri, 2 Nov 2018 10:16:17 -0700 Subject: [PATCH 038/726] bpf: show main program address and length in bpf_prog_info Currently, when there is no subprog (prog->aux->func_cnt == 0), bpf_prog_info does not return any jited_ksyms or jited_func_lens. This patch adds main program address (prog->bpf_func) and main program length (prog->jited_len) to bpf_prog_info. Signed-off-by: Song Liu Signed-off-by: Daniel Borkmann --- kernel/bpf/syscall.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 34a9eef5992c..9418174c276c 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -2158,11 +2158,11 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, } ulen = info.nr_jited_ksyms; - info.nr_jited_ksyms = prog->aux->func_cnt; + info.nr_jited_ksyms = prog->aux->func_cnt ? : 1; if (info.nr_jited_ksyms && ulen) { if (bpf_dump_raw_ok()) { + unsigned long ksym_addr; u64 __user *user_ksyms; - ulong ksym_addr; u32 i; /* copy the address of the kernel symbol @@ -2170,9 +2170,17 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, */ ulen = min_t(u32, info.nr_jited_ksyms, ulen); user_ksyms = u64_to_user_ptr(info.jited_ksyms); - for (i = 0; i < ulen; i++) { - ksym_addr = (ulong) prog->aux->func[i]->bpf_func; - if (put_user((u64) ksym_addr, &user_ksyms[i])) + if (prog->aux->func_cnt) { + for (i = 0; i < ulen; i++) { + ksym_addr = (unsigned long) + prog->aux->func[i]->bpf_func; + if (put_user((u64) ksym_addr, + &user_ksyms[i])) + return -EFAULT; + } + } else { + ksym_addr = (unsigned long) prog->bpf_func; + if (put_user((u64) ksym_addr, &user_ksyms[0])) return -EFAULT; } } else { @@ -2181,7 +2189,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, } ulen = info.nr_jited_func_lens; - info.nr_jited_func_lens = prog->aux->func_cnt; + info.nr_jited_func_lens = prog->aux->func_cnt ? : 1; if (info.nr_jited_func_lens && ulen) { if (bpf_dump_raw_ok()) { u32 __user *user_lens; @@ -2190,9 +2198,16 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, /* copy the JITed image lengths for each function */ ulen = min_t(u32, info.nr_jited_func_lens, ulen); user_lens = u64_to_user_ptr(info.jited_func_lens); - for (i = 0; i < ulen; i++) { - func_len = prog->aux->func[i]->jited_len; - if (put_user(func_len, &user_lens[i])) + if (prog->aux->func_cnt) { + for (i = 0; i < ulen; i++) { + func_len = + prog->aux->func[i]->jited_len; + if (put_user(func_len, &user_lens[i])) + return -EFAULT; + } + } else { + func_len = prog->jited_len; + if (put_user(func_len, &user_lens[0])) return -EFAULT; } } else { From 28c2fae726bf5003cd209b0d5910a642af98316f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 2 Nov 2018 11:35:46 +0100 Subject: [PATCH 039/726] bpf: fix bpf_prog_get_info_by_fd to return 0 func_lens for unpriv While dbecd7388476 ("bpf: get kernel symbol addresses via syscall") zeroed info.nr_jited_ksyms in bpf_prog_get_info_by_fd() for queries from unprivileged users, commit 815581c11cc2 ("bpf: get JITed image lengths of functions via syscall") forgot about doing so and therefore returns the #elems of the user set up buffer which is incorrect. It also needs to indicate a info.nr_jited_func_lens of zero. Fixes: 815581c11cc2 ("bpf: get JITed image lengths of functions via syscall") Signed-off-by: Daniel Borkmann Cc: Sandipan Das Cc: Song Liu Signed-off-by: Alexei Starovoitov --- kernel/bpf/syscall.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 9418174c276c..cf5040fd5434 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -2078,6 +2078,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, info.jited_prog_len = 0; info.xlated_prog_len = 0; info.nr_jited_ksyms = 0; + info.nr_jited_func_lens = 0; goto done; } From 49682bfa1e0e448a711471a5db83be0df1fb39a2 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Wed, 31 Oct 2018 13:16:58 +0100 Subject: [PATCH 040/726] net: document skb parameter in function 'skb_gso_size_check' Remove kernel-doc warning: net/core/skbuff.c:4953: warning: Function parameter or member 'skb' not described in 'skb_gso_size_check' Signed-off-by: Mathieu Malaterre Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 946de0e24c87..b4ee5c8b928f 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4944,6 +4944,8 @@ static unsigned int skb_gso_mac_seglen(const struct sk_buff *skb) * * This is a helper to do that correctly considering GSO_BY_FRAGS. * + * @skb: GSO skb + * * @seg_len: The segmented length (from skb_gso_*_seglen). In the * GSO_BY_FRAGS case this will be [header sizes + GSO_BY_FRAGS]. * From 7b900ead6cc66b2ee873cb042dfba169aa68b56c Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Wed, 31 Oct 2018 22:52:19 +0100 Subject: [PATCH 041/726] usbnet: smsc95xx: disable carrier check while suspending We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf Reviewed-by: Raghuram Chary J Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 262e7a3c23cb..2d17f3b9bb16 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1598,6 +1598,8 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) return ret; } + cancel_delayed_work_sync(&pdata->carrier_check); + if (pdata->suspend_flags) { netdev_warn(dev->net, "error during last resume\n"); pdata->suspend_flags = 0; @@ -1840,6 +1842,11 @@ done: */ if (ret && PMSG_IS_AUTO(message)) usbnet_resume(intf); + + if (ret) + schedule_delayed_work(&pdata->carrier_check, + CARRIER_CHECK_DELAY); + return ret; } From 2384d02520ff2a916169b2fd85ea50e923ed56c2 Mon Sep 17 00:00:00 2001 From: Jeff Barnhill <0xeffeff@gmail.com> Date: Fri, 2 Nov 2018 20:23:57 +0000 Subject: [PATCH 042/726] net/ipv6: Add anycast addresses to a global hashtable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit icmp6_send() function is expensive on systems with a large number of interfaces. Every time it’s called, it has to verify that the source address does not correspond to an existing anycast address by looping through every device and every anycast address on the device. This can result in significant delays for a CPU when there are a large number of neighbors and ND timers are frequently timing out and calling neigh_invalidate(). Add anycast addresses to a global hashtable to allow quick searching for matching anycast addresses. This is based on inet6_addr_lst in addrconf.c. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller --- include/net/addrconf.h | 2 ++ include/net/if_inet6.h | 2 ++ net/ipv6/af_inet6.c | 5 +++ net/ipv6/anycast.c | 80 +++++++++++++++++++++++++++++++++++++++--- 4 files changed, 85 insertions(+), 4 deletions(-) diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 14b789a123e7..1656c5978498 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -317,6 +317,8 @@ bool ipv6_chk_acast_addr(struct net *net, struct net_device *dev, const struct in6_addr *addr); bool ipv6_chk_acast_addr_src(struct net *net, struct net_device *dev, const struct in6_addr *addr); +int ipv6_anycast_init(void); +void ipv6_anycast_cleanup(void); /* Device notifier */ int register_inet6addr_notifier(struct notifier_block *nb); diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h index d7578cf49c3a..c9c78c15bce0 100644 --- a/include/net/if_inet6.h +++ b/include/net/if_inet6.h @@ -146,10 +146,12 @@ struct ifacaddr6 { struct in6_addr aca_addr; struct fib6_info *aca_rt; struct ifacaddr6 *aca_next; + struct hlist_node aca_addr_lst; int aca_users; refcount_t aca_refcnt; unsigned long aca_cstamp; unsigned long aca_tstamp; + struct rcu_head rcu; }; #define IFA_HOST IPV6_ADDR_LOOPBACK diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3f4d61017a69..f0cd291034f0 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -1001,6 +1001,9 @@ static int __init inet6_init(void) err = ip6_flowlabel_init(); if (err) goto ip6_flowlabel_fail; + err = ipv6_anycast_init(); + if (err) + goto ipv6_anycast_fail; err = addrconf_init(); if (err) goto addrconf_fail; @@ -1091,6 +1094,8 @@ ipv6_frag_fail: ipv6_exthdrs_fail: addrconf_cleanup(); addrconf_fail: + ipv6_anycast_cleanup(); +ipv6_anycast_fail: ip6_flowlabel_cleanup(); ip6_flowlabel_fail: ndisc_late_cleanup(); diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c index 4e0ff7031edd..7698637cf827 100644 --- a/net/ipv6/anycast.c +++ b/net/ipv6/anycast.c @@ -44,8 +44,22 @@ #include +#define IN6_ADDR_HSIZE_SHIFT 8 +#define IN6_ADDR_HSIZE BIT(IN6_ADDR_HSIZE_SHIFT) +/* anycast address hash table + */ +static struct hlist_head inet6_acaddr_lst[IN6_ADDR_HSIZE]; +static DEFINE_SPINLOCK(acaddr_hash_lock); + static int ipv6_dev_ac_dec(struct net_device *dev, const struct in6_addr *addr); +static u32 inet6_acaddr_hash(struct net *net, const struct in6_addr *addr) +{ + u32 val = ipv6_addr_hash(addr) ^ net_hash_mix(net); + + return hash_32(val, IN6_ADDR_HSIZE_SHIFT); +} + /* * socket join an anycast group */ @@ -204,16 +218,39 @@ void ipv6_sock_ac_close(struct sock *sk) rtnl_unlock(); } +static void ipv6_add_acaddr_hash(struct net *net, struct ifacaddr6 *aca) +{ + unsigned int hash = inet6_acaddr_hash(net, &aca->aca_addr); + + spin_lock(&acaddr_hash_lock); + hlist_add_head_rcu(&aca->aca_addr_lst, &inet6_acaddr_lst[hash]); + spin_unlock(&acaddr_hash_lock); +} + +static void ipv6_del_acaddr_hash(struct ifacaddr6 *aca) +{ + spin_lock(&acaddr_hash_lock); + hlist_del_init_rcu(&aca->aca_addr_lst); + spin_unlock(&acaddr_hash_lock); +} + static void aca_get(struct ifacaddr6 *aca) { refcount_inc(&aca->aca_refcnt); } +static void aca_free_rcu(struct rcu_head *h) +{ + struct ifacaddr6 *aca = container_of(h, struct ifacaddr6, rcu); + + fib6_info_release(aca->aca_rt); + kfree(aca); +} + static void aca_put(struct ifacaddr6 *ac) { if (refcount_dec_and_test(&ac->aca_refcnt)) { - fib6_info_release(ac->aca_rt); - kfree(ac); + call_rcu(&ac->rcu, aca_free_rcu); } } @@ -229,6 +266,7 @@ static struct ifacaddr6 *aca_alloc(struct fib6_info *f6i, aca->aca_addr = *addr; fib6_info_hold(f6i); aca->aca_rt = f6i; + INIT_HLIST_NODE(&aca->aca_addr_lst); aca->aca_users = 1; /* aca_tstamp should be updated upon changes */ aca->aca_cstamp = aca->aca_tstamp = jiffies; @@ -285,6 +323,8 @@ int __ipv6_dev_ac_inc(struct inet6_dev *idev, const struct in6_addr *addr) aca_get(aca); write_unlock_bh(&idev->lock); + ipv6_add_acaddr_hash(net, aca); + ip6_ins_rt(net, f6i); addrconf_join_solict(idev->dev, &aca->aca_addr); @@ -325,6 +365,7 @@ int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr) else idev->ac_list = aca->aca_next; write_unlock_bh(&idev->lock); + ipv6_del_acaddr_hash(aca); addrconf_leave_solict(idev, &aca->aca_addr); ip6_del_rt(dev_net(idev->dev), aca->aca_rt); @@ -352,6 +393,8 @@ void ipv6_ac_destroy_dev(struct inet6_dev *idev) idev->ac_list = aca->aca_next; write_unlock_bh(&idev->lock); + ipv6_del_acaddr_hash(aca); + addrconf_leave_solict(idev, &aca->aca_addr); ip6_del_rt(dev_net(idev->dev), aca->aca_rt); @@ -390,17 +433,25 @@ static bool ipv6_chk_acast_dev(struct net_device *dev, const struct in6_addr *ad bool ipv6_chk_acast_addr(struct net *net, struct net_device *dev, const struct in6_addr *addr) { + unsigned int hash = inet6_acaddr_hash(net, addr); + struct net_device *nh_dev; + struct ifacaddr6 *aca; bool found = false; rcu_read_lock(); if (dev) found = ipv6_chk_acast_dev(dev, addr); else - for_each_netdev_rcu(net, dev) - if (ipv6_chk_acast_dev(dev, addr)) { + hlist_for_each_entry_rcu(aca, &inet6_acaddr_lst[hash], + aca_addr_lst) { + nh_dev = fib6_info_nh_dev(aca->aca_rt); + if (!nh_dev || !net_eq(dev_net(nh_dev), net)) + continue; + if (ipv6_addr_equal(&aca->aca_addr, addr)) { found = true; break; } + } rcu_read_unlock(); return found; } @@ -539,4 +590,25 @@ void ac6_proc_exit(struct net *net) { remove_proc_entry("anycast6", net->proc_net); } + +/* Init / cleanup code + */ +int __init ipv6_anycast_init(void) +{ + int i; + + for (i = 0; i < IN6_ADDR_HSIZE; i++) + INIT_HLIST_HEAD(&inet6_acaddr_lst[i]); + return 0; +} + +void ipv6_anycast_cleanup(void) +{ + int i; + + spin_lock(&acaddr_hash_lock); + for (i = 0; i < IN6_ADDR_HSIZE; i++) + WARN_ON(!hlist_empty(&inet6_acaddr_lst[i])); + spin_unlock(&acaddr_hash_lock); +} #endif From 284fb78ed7572117846f8e1d1d8e3dbfd16880c2 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Fri, 2 Nov 2018 19:23:41 -0700 Subject: [PATCH 043/726] net: dsa: microchip: initialize mutex before use Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha Reviewed-by: Pavel Machek Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 54e0ca6ed730..86b6464b4525 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1117,11 +1117,6 @@ static int ksz_switch_init(struct ksz_device *dev) { int i; - mutex_init(&dev->reg_mutex); - mutex_init(&dev->stats_mutex); - mutex_init(&dev->alu_mutex); - mutex_init(&dev->vlan_mutex); - dev->ds->ops = &ksz_switch_ops; for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) { @@ -1206,6 +1201,11 @@ int ksz_switch_register(struct ksz_device *dev) if (dev->pdata) dev->chip_id = dev->pdata->chip_id; + mutex_init(&dev->reg_mutex); + mutex_init(&dev->stats_mutex); + mutex_init(&dev->alu_mutex); + mutex_init(&dev->vlan_mutex); + if (ksz_switch_detect(dev)) return -EINVAL; From c7e86acfcee30794dc99a0759924bf7b9d43f1ca Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 1 Nov 2018 13:39:53 +0000 Subject: [PATCH 044/726] rxrpc: Fix lockup due to no error backoff after ack transmit error If the network becomes (partially) unavailable, say by disabling IPv6, the background ACK transmission routine can get itself into a tizzy by proposing immediate ACK retransmission. Since we're in the call event processor, that happens immediately without returning to the workqueue manager. The condition should clear after a while when either the network comes back or the call times out. Fix this by: (1) When re-proposing an ACK on failed Tx, don't schedule it immediately. This will allow a certain amount of time to elapse before we try again. (2) Enforce a return to the workqueue manager after a certain number of iterations of the call processing loop. (3) Add a backoff delay that increases the delay on deferred ACKs by a jiffy per failed transmission to a limit of HZ. The backoff delay is cleared on a successful return from kernel_sendmsg(). (4) Cancel calls immediately if the opening sendmsg fails. The layer above can arrange retransmission or rotate to another server. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells Signed-off-by: David S. Miller --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/call_event.c | 18 ++++++++++++++---- net/rxrpc/output.c | 35 +++++++++++++++++++++++++++++++---- 3 files changed, 46 insertions(+), 8 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 382196e57a26..bc628acf4f4f 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -611,6 +611,7 @@ struct rxrpc_call { * not hard-ACK'd packet follows this. */ rxrpc_seq_t tx_top; /* Highest Tx slot allocated. */ + u16 tx_backoff; /* Delay to insert due to Tx failure */ /* TCP-style slow-start congestion control [RFC5681]. Since the SMSS * is fixed, we keep these numbers in terms of segments (ie. DATA diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index 8e7434e92097..468efc3660c0 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -123,6 +123,7 @@ static void __rxrpc_propose_ACK(struct rxrpc_call *call, u8 ack_reason, else ack_at = expiry; + ack_at += READ_ONCE(call->tx_backoff); ack_at += now; if (time_before(ack_at, call->ack_at)) { WRITE_ONCE(call->ack_at, ack_at); @@ -311,6 +312,7 @@ void rxrpc_process_call(struct work_struct *work) container_of(work, struct rxrpc_call, processor); rxrpc_serial_t *send_ack; unsigned long now, next, t; + unsigned int iterations = 0; rxrpc_see_call(call); @@ -319,6 +321,11 @@ void rxrpc_process_call(struct work_struct *work) call->debug_id, rxrpc_call_states[call->state], call->events); recheck_state: + /* Limit the number of times we do this before returning to the manager */ + iterations++; + if (iterations > 5) + goto requeue; + if (test_and_clear_bit(RXRPC_CALL_EV_ABORT, &call->events)) { rxrpc_send_abort_packet(call); goto recheck_state; @@ -447,13 +454,16 @@ recheck_state: rxrpc_reduce_call_timer(call, next, now, rxrpc_timer_restart); /* other events may have been raised since we started checking */ - if (call->events && call->state < RXRPC_CALL_COMPLETE) { - __rxrpc_queue_call(call); - goto out; - } + if (call->events && call->state < RXRPC_CALL_COMPLETE) + goto requeue; out_put: rxrpc_put_call(call, rxrpc_call_put); out: _leave(""); + return; + +requeue: + __rxrpc_queue_call(call); + goto out; } diff --git a/net/rxrpc/output.c b/net/rxrpc/output.c index 189418888839..736aa9281100 100644 --- a/net/rxrpc/output.c +++ b/net/rxrpc/output.c @@ -34,6 +34,21 @@ struct rxrpc_abort_buffer { static const char rxrpc_keepalive_string[] = ""; +/* + * Increase Tx backoff on transmission failure and clear it on success. + */ +static void rxrpc_tx_backoff(struct rxrpc_call *call, int ret) +{ + if (ret < 0) { + u16 tx_backoff = READ_ONCE(call->tx_backoff); + + if (tx_backoff < HZ) + WRITE_ONCE(call->tx_backoff, tx_backoff + 1); + } else { + WRITE_ONCE(call->tx_backoff, 0); + } +} + /* * Arrange for a keepalive ping a certain time after we last transmitted. This * lets the far side know we're still interested in this call and helps keep @@ -210,6 +225,7 @@ int rxrpc_send_ack_packet(struct rxrpc_call *call, bool ping, else trace_rxrpc_tx_packet(call->debug_id, &pkt->whdr, rxrpc_tx_point_call_ack); + rxrpc_tx_backoff(call, ret); if (call->state < RXRPC_CALL_COMPLETE) { if (ret < 0) { @@ -218,7 +234,7 @@ int rxrpc_send_ack_packet(struct rxrpc_call *call, bool ping, rxrpc_propose_ACK(call, pkt->ack.reason, ntohs(pkt->ack.maxSkew), ntohl(pkt->ack.serial), - true, true, + false, true, rxrpc_propose_ack_retry_tx); } else { spin_lock_bh(&call->lock); @@ -300,7 +316,7 @@ int rxrpc_send_abort_packet(struct rxrpc_call *call) else trace_rxrpc_tx_packet(call->debug_id, &pkt.whdr, rxrpc_tx_point_call_abort); - + rxrpc_tx_backoff(call, ret); rxrpc_put_connection(conn); return ret; @@ -413,6 +429,7 @@ int rxrpc_send_data_packet(struct rxrpc_call *call, struct sk_buff *skb, else trace_rxrpc_tx_packet(call->debug_id, &whdr, rxrpc_tx_point_call_data_nofrag); + rxrpc_tx_backoff(call, ret); if (ret == -EMSGSIZE) goto send_fragmentable; @@ -445,9 +462,18 @@ done: rxrpc_reduce_call_timer(call, expect_rx_by, nowj, rxrpc_timer_set_for_normal); } - } - rxrpc_set_keepalive(call); + rxrpc_set_keepalive(call); + } else { + /* Cancel the call if the initial transmission fails, + * particularly if that's due to network routing issues that + * aren't going away anytime soon. The layer above can arrange + * the retransmission. + */ + if (!test_and_set_bit(RXRPC_CALL_BEGAN_RX_TIMER, &call->flags)) + rxrpc_set_call_completion(call, RXRPC_CALL_LOCAL_ERROR, + RX_USER_ABORT, ret); + } _leave(" = %d [%u]", ret, call->peer->maxdata); return ret; @@ -506,6 +532,7 @@ send_fragmentable: else trace_rxrpc_tx_packet(call->debug_id, &whdr, rxrpc_tx_point_call_data_frag); + rxrpc_tx_backoff(call, ret); up_write(&conn->params.local->defrag_sem); goto done; From 09e805d2570a3a94f13dd9c9ad2bcab23da76e09 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Thu, 1 Nov 2018 15:55:37 -0700 Subject: [PATCH 045/726] net: bcmgenet: protect stop from timeout A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 20c1681bb1af..2d6f090bf644 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2855,7 +2855,6 @@ static void bcmgenet_netif_start(struct net_device *dev) umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true); - netif_tx_start_all_queues(dev); bcmgenet_enable_tx_napi(priv); /* Monitor link interrupts now */ @@ -2937,6 +2936,8 @@ static int bcmgenet_open(struct net_device *dev) bcmgenet_netif_start(dev); + netif_tx_start_all_queues(dev); + return 0; err_irq1: @@ -2958,7 +2959,7 @@ static void bcmgenet_netif_stop(struct net_device *dev) struct bcmgenet_priv *priv = netdev_priv(dev); bcmgenet_disable_tx_napi(priv); - netif_tx_stop_all_queues(dev); + netif_tx_disable(dev); /* Disable MAC receive */ umac_enable_set(priv, CMD_RX_EN, false); @@ -3620,13 +3621,13 @@ static int bcmgenet_suspend(struct device *d) if (!netif_running(dev)) return 0; + netif_device_detach(dev); + bcmgenet_netif_stop(dev); if (!device_may_wakeup(d)) phy_suspend(dev->phydev); - netif_device_detach(dev); - /* Prepare the device for Wake-on-LAN and switch to the slow clock */ if (device_may_wakeup(d) && priv->wolopts) { ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC); @@ -3700,8 +3701,6 @@ static int bcmgenet_resume(struct device *d) /* Always enable ring 16 - descriptor ring */ bcmgenet_enable_dma(priv, dma_ctrl); - netif_device_attach(dev); - if (!device_may_wakeup(d)) phy_resume(dev->phydev); @@ -3710,6 +3709,8 @@ static int bcmgenet_resume(struct device *d) bcmgenet_netif_start(dev); + netif_device_attach(dev); + return 0; out_clk_disable: From 7cb6a2a2c72c1ed8f42fb01f1a661281b568dead Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 1 Nov 2018 15:55:38 -0700 Subject: [PATCH 046/726] net: systemport: Protect stop from timeout A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 4122553e224b..0e2d99c737e3 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1902,9 +1902,6 @@ static void bcm_sysport_netif_start(struct net_device *dev) intrl2_1_mask_clear(priv, 0xffffffff); else intrl2_0_mask_clear(priv, INTRL2_0_TDMA_MBDONE_MASK); - - /* Last call before we start the real business */ - netif_tx_start_all_queues(dev); } static void rbuf_init(struct bcm_sysport_priv *priv) @@ -2048,6 +2045,8 @@ static int bcm_sysport_open(struct net_device *dev) bcm_sysport_netif_start(dev); + netif_tx_start_all_queues(dev); + return 0; out_clear_rx_int: @@ -2071,7 +2070,7 @@ static void bcm_sysport_netif_stop(struct net_device *dev) struct bcm_sysport_priv *priv = netdev_priv(dev); /* stop all software from updating hardware */ - netif_tx_stop_all_queues(dev); + netif_tx_disable(dev); napi_disable(&priv->napi); cancel_work_sync(&priv->dim.dim.work); phy_stop(dev->phydev); @@ -2658,12 +2657,12 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d) if (!netif_running(dev)) return 0; + netif_device_detach(dev); + bcm_sysport_netif_stop(dev); phy_suspend(dev->phydev); - netif_device_detach(dev); - /* Disable UniMAC RX */ umac_enable_set(priv, CMD_RX_EN, 0); @@ -2746,8 +2745,6 @@ static int __maybe_unused bcm_sysport_resume(struct device *d) goto out_free_rx_ring; } - netif_device_attach(dev); - /* RX pipe enable */ topctrl_writel(priv, 0, RX_FLUSH_CNTL); @@ -2788,6 +2785,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d) bcm_sysport_netif_start(dev); + netif_device_attach(dev); + return 0; out_free_rx_ring: From cd26ea6d50a207ee37e0364ecc2d196d6c9671e8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 3 Nov 2018 08:19:56 -0300 Subject: [PATCH 047/726] perf trace: Fix setting of augmented payload when using eBPF + raw_syscalls For now with BPF raw_augmented we hook into raw_syscalls:sys_enter and there we get all 6 syscall args plus the tracepoint common fields (sizeof(long)) and the syscall_nr (another long). So we check if that is the case and if so don't look after the sc->args_size, but always after the full raw_syscalls:sys_enter payload, which is fixed. We'll revisit this later to pass s->args_size to the BPF augmenter (now tools/perf/examples/bpf/augmented_raw_syscalls.c, so that it copies only what we need for each syscall, like what happens when we use syscalls:sys_enter_NAME, so that we reduce the kernel/userspace traffic to just what is needed for each syscall. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-nlslrg8apxdsobt4pwl3n7ur@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index f582ca575883..835619476370 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -108,6 +108,7 @@ struct trace { } stats; unsigned int max_stack; unsigned int min_stack; + bool raw_augmented_syscalls; bool not_ev_qualifier; bool live; bool full_time; @@ -1724,13 +1725,28 @@ static int trace__fprintf_sample(struct trace *trace, struct perf_evsel *evsel, return printed; } -static void *syscall__augmented_args(struct syscall *sc, struct perf_sample *sample, int *augmented_args_size) +static void *syscall__augmented_args(struct syscall *sc, struct perf_sample *sample, int *augmented_args_size, bool raw_augmented) { void *augmented_args = NULL; + /* + * For now with BPF raw_augmented we hook into raw_syscalls:sys_enter + * and there we get all 6 syscall args plus the tracepoint common + * fields (sizeof(long)) and the syscall_nr (another long). So we check + * if that is the case and if so don't look after the sc->args_size, + * but always after the full raw_syscalls:sys_enter payload, which is + * fixed. + * + * We'll revisit this later to pass s->args_size to the BPF augmenter + * (now tools/perf/examples/bpf/augmented_raw_syscalls.c, so that it + * copies only what we need for each syscall, like what happens when we + * use syscalls:sys_enter_NAME, so that we reduce the kernel/userspace + * traffic to just what is needed for each syscall. + */ + int args_size = raw_augmented ? (8 * (int)sizeof(long)) : sc->args_size; - *augmented_args_size = sample->raw_size - sc->args_size; + *augmented_args_size = sample->raw_size - args_size; if (*augmented_args_size > 0) - augmented_args = sample->raw_data + sc->args_size; + augmented_args = sample->raw_data + args_size; return augmented_args; } @@ -1780,7 +1796,7 @@ static int trace__sys_enter(struct trace *trace, struct perf_evsel *evsel, * here and avoid using augmented syscalls when the evsel is the raw_syscalls one. */ if (evsel != trace->syscalls.events.sys_enter) - augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size); + augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls); ttrace->entry_time = sample->time; msg = ttrace->entry_str; printed += scnprintf(msg + printed, trace__entry_str_size - printed, "%s(", sc->name); @@ -1833,7 +1849,7 @@ static int trace__fprintf_sys_enter(struct trace *trace, struct perf_evsel *evse goto out_put; args = perf_evsel__sc_tp_ptr(evsel, args, sample); - augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size); + augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls); syscall__scnprintf_args(sc, msg, sizeof(msg), args, augmented_args, augmented_args_size, trace, thread); fprintf(trace->output, "%s", msg); err = 0; @@ -3501,8 +3517,15 @@ int cmd_trace(int argc, const char **argv) evsel->handler = trace__sys_enter; evlist__for_each_entry(trace.evlist, evsel) { - if (strstarts(perf_evsel__name(evsel), "syscalls:sys_exit_") || - strcmp(perf_evsel__name(evsel), "raw_syscalls:sys_exit") == 0) { + bool raw_syscalls_sys_exit = strcmp(perf_evsel__name(evsel), "raw_syscalls:sys_exit") == 0; + + if (raw_syscalls_sys_exit) { + trace.raw_augmented_syscalls = true; + goto init_augmented_syscall_tp; + } + + if (strstarts(perf_evsel__name(evsel), "syscalls:sys_exit_")) { +init_augmented_syscall_tp: perf_evsel__init_augmented_syscall_tp(evsel); perf_evsel__init_augmented_syscall_tp_ret(evsel); evsel->handler = trace__sys_exit; From 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 19 Oct 2018 19:35:19 +0200 Subject: [PATCH 048/726] netfilter: ipset: Correct rcu_dereference() call in ip_set_put_comment() The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set_comment.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/netfilter/ipset/ip_set_comment.h b/include/linux/netfilter/ipset/ip_set_comment.h index 8e2bab1e8e90..70877f8de7e9 100644 --- a/include/linux/netfilter/ipset/ip_set_comment.h +++ b/include/linux/netfilter/ipset/ip_set_comment.h @@ -43,11 +43,11 @@ ip_set_init_comment(struct ip_set *set, struct ip_set_comment *comment, rcu_assign_pointer(comment->c, c); } -/* Used only when dumping a set, protected by rcu_read_lock_bh() */ +/* Used only when dumping a set, protected by rcu_read_lock() */ static inline int ip_set_put_comment(struct sk_buff *skb, const struct ip_set_comment *comment) { - struct ip_set_comment_rcu *c = rcu_dereference_bh(comment->c); + struct ip_set_comment_rcu *c = rcu_dereference(comment->c); if (!c) return 0; From 54451f60c8fa061af9051a53be9786393947367c Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 21 Oct 2018 00:00:08 +0900 Subject: [PATCH 049/726] netfilter: xt_IDLETIMER: add sysfs filename checking routine When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_IDLETIMER.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c index c6acfc2d9c84..eb4cbd244c3d 100644 --- a/net/netfilter/xt_IDLETIMER.c +++ b/net/netfilter/xt_IDLETIMER.c @@ -114,6 +114,22 @@ static void idletimer_tg_expired(struct timer_list *t) schedule_work(&timer->work); } +static int idletimer_check_sysfs_name(const char *name, unsigned int size) +{ + int ret; + + ret = xt_check_proc_name(name, size); + if (ret < 0) + return ret; + + if (!strcmp(name, "power") || + !strcmp(name, "subsystem") || + !strcmp(name, "uevent")) + return -EINVAL; + + return 0; +} + static int idletimer_tg_create(struct idletimer_tg_info *info) { int ret; @@ -124,6 +140,10 @@ static int idletimer_tg_create(struct idletimer_tg_info *info) goto out; } + ret = idletimer_check_sysfs_name(info->label, sizeof(info->label)); + if (ret < 0) + goto out_free_timer; + sysfs_attr_init(&info->timer->attr.attr); info->timer->attr.attr.name = kstrdup(info->label, GFP_KERNEL); if (!info->timer->attr.attr.name) { From 8a02bdd50b2ecb6d62121d2958d3ea186cc88ce7 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 30 Oct 2018 22:43:42 +0100 Subject: [PATCH 050/726] netfilter: ipset: Fix calling ip_set() macro at dumping The ip_set() macro is called when either ip_set_ref_lock held only or no lock/nfnl mutex is held at dumping. Take this into account properly. Also, use Pablo's suggestion to use rcu_dereference_raw(), the ref_netlink protects the set. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 68db946df151..1577f2f76060 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -55,11 +55,15 @@ MODULE_AUTHOR("Jozsef Kadlecsik "); MODULE_DESCRIPTION("core IP set support"); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_IPSET); -/* When the nfnl mutex is held: */ +/* When the nfnl mutex or ip_set_ref_lock is held: */ #define ip_set_dereference(p) \ - rcu_dereference_protected(p, lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET)) + rcu_dereference_protected(p, \ + lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET) || \ + lockdep_is_held(&ip_set_ref_lock)) #define ip_set(inst, id) \ ip_set_dereference((inst)->ip_set_list)[id] +#define ip_set_ref_netlink(inst,id) \ + rcu_dereference_raw((inst)->ip_set_list)[id] /* The set types are implemented in modules and registered set types * can be found in ip_set_type_list. Adding/deleting types is @@ -1251,7 +1255,7 @@ ip_set_dump_done(struct netlink_callback *cb) struct ip_set_net *inst = (struct ip_set_net *)cb->args[IPSET_CB_NET]; ip_set_id_t index = (ip_set_id_t)cb->args[IPSET_CB_INDEX]; - struct ip_set *set = ip_set(inst, index); + struct ip_set *set = ip_set_ref_netlink(inst, index); if (set->variant->uref) set->variant->uref(set, cb, false); @@ -1440,7 +1444,7 @@ next_set: release_refcount: /* If there was an error or set is done, release set */ if (ret || !cb->args[IPSET_CB_ARG0]) { - set = ip_set(inst, index); + set = ip_set_ref_netlink(inst, index); if (set->variant->uref) set->variant->uref(set, cb, false); pr_debug("release set %s\n", set->name); From a95a7774d51e13f9cf4b7285666829b68852f07a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 2 Nov 2018 00:11:34 +0100 Subject: [PATCH 051/726] netfilter: conntrack: add nf_{tcp,udp,sctp,icmp,dccp,icmpv6,generic}_pernet() Expose these functions to access conntrack protocol tracker netns area, nfnetlink_cttimeout needs this. Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_l4proto.h | 39 ++++++++++++++++++++ net/netfilter/nf_conntrack_proto_dccp.c | 13 ++----- net/netfilter/nf_conntrack_proto_generic.c | 11 ++---- net/netfilter/nf_conntrack_proto_icmp.c | 11 ++---- net/netfilter/nf_conntrack_proto_icmpv6.c | 11 ++---- net/netfilter/nf_conntrack_proto_sctp.c | 11 ++---- net/netfilter/nf_conntrack_proto_tcp.c | 15 +++----- net/netfilter/nf_conntrack_proto_udp.c | 11 ++---- 8 files changed, 63 insertions(+), 59 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h index eed04af9b75e..ae7b86f587f2 100644 --- a/include/net/netfilter/nf_conntrack_l4proto.h +++ b/include/net/netfilter/nf_conntrack_l4proto.h @@ -153,4 +153,43 @@ void nf_ct_l4proto_log_invalid(const struct sk_buff *skb, const char *fmt, ...) { } #endif /* CONFIG_SYSCTL */ +static inline struct nf_generic_net *nf_generic_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.generic; +} + +static inline struct nf_tcp_net *nf_tcp_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.tcp; +} + +static inline struct nf_udp_net *nf_udp_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.udp; +} + +static inline struct nf_icmp_net *nf_icmp_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.icmp; +} + +static inline struct nf_icmp_net *nf_icmpv6_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.icmpv6; +} + +#ifdef CONFIG_NF_CT_PROTO_DCCP +static inline struct nf_dccp_net *nf_dccp_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.dccp; +} +#endif + +#ifdef CONFIG_NF_CT_PROTO_SCTP +static inline struct nf_sctp_net *nf_sctp_pernet(struct net *net) +{ + return &net->ct.nf_ct_proto.sctp; +} +#endif + #endif /*_NF_CONNTRACK_PROTOCOL_H*/ diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index 171e9e122e5f..023c1445bc39 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -384,11 +384,6 @@ dccp_state_table[CT_DCCP_ROLE_MAX + 1][DCCP_PKT_SYNCACK + 1][CT_DCCP_MAX + 1] = }, }; -static inline struct nf_dccp_net *dccp_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.dccp; -} - static noinline bool dccp_new(struct nf_conn *ct, const struct sk_buff *skb, const struct dccp_hdr *dh) @@ -401,7 +396,7 @@ dccp_new(struct nf_conn *ct, const struct sk_buff *skb, state = dccp_state_table[CT_DCCP_ROLE_CLIENT][dh->dccph_type][CT_DCCP_NONE]; switch (state) { default: - dn = dccp_pernet(net); + dn = nf_dccp_pernet(net); if (dn->dccp_loose == 0) { msg = "not picking up existing connection "; goto out_invalid; @@ -568,7 +563,7 @@ static int dccp_packet(struct nf_conn *ct, struct sk_buff *skb, timeouts = nf_ct_timeout_lookup(ct); if (!timeouts) - timeouts = dccp_pernet(nf_ct_net(ct))->dccp_timeout; + timeouts = nf_dccp_pernet(nf_ct_net(ct))->dccp_timeout; nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[new_state]); return NF_ACCEPT; @@ -681,7 +676,7 @@ static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct) static int dccp_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { - struct nf_dccp_net *dn = dccp_pernet(net); + struct nf_dccp_net *dn = nf_dccp_pernet(net); unsigned int *timeouts = data; int i; @@ -814,7 +809,7 @@ static int dccp_kmemdup_sysctl_table(struct net *net, struct nf_proto_net *pn, static int dccp_init_net(struct net *net) { - struct nf_dccp_net *dn = dccp_pernet(net); + struct nf_dccp_net *dn = nf_dccp_pernet(net); struct nf_proto_net *pn = &dn->pn; if (!pn->users) { diff --git a/net/netfilter/nf_conntrack_proto_generic.c b/net/netfilter/nf_conntrack_proto_generic.c index e10e867e0b55..5da19d5fbc76 100644 --- a/net/netfilter/nf_conntrack_proto_generic.c +++ b/net/netfilter/nf_conntrack_proto_generic.c @@ -27,11 +27,6 @@ static bool nf_generic_should_process(u8 proto) } } -static inline struct nf_generic_net *generic_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.generic; -} - static bool generic_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff, struct net *net, struct nf_conntrack_tuple *tuple) @@ -58,7 +53,7 @@ static int generic_packet(struct nf_conn *ct, } if (!timeout) - timeout = &generic_pernet(nf_ct_net(ct))->timeout; + timeout = &nf_generic_pernet(nf_ct_net(ct))->timeout; nf_ct_refresh_acct(ct, ctinfo, skb, *timeout); return NF_ACCEPT; @@ -72,7 +67,7 @@ static int generic_packet(struct nf_conn *ct, static int generic_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { - struct nf_generic_net *gn = generic_pernet(net); + struct nf_generic_net *gn = nf_generic_pernet(net); unsigned int *timeout = data; if (!timeout) @@ -138,7 +133,7 @@ static int generic_kmemdup_sysctl_table(struct nf_proto_net *pn, static int generic_init_net(struct net *net) { - struct nf_generic_net *gn = generic_pernet(net); + struct nf_generic_net *gn = nf_generic_pernet(net); struct nf_proto_net *pn = &gn->pn; gn->timeout = nf_ct_generic_timeout; diff --git a/net/netfilter/nf_conntrack_proto_icmp.c b/net/netfilter/nf_conntrack_proto_icmp.c index 3598520bd19b..de64d8a5fdfd 100644 --- a/net/netfilter/nf_conntrack_proto_icmp.c +++ b/net/netfilter/nf_conntrack_proto_icmp.c @@ -25,11 +25,6 @@ static const unsigned int nf_ct_icmp_timeout = 30*HZ; -static inline struct nf_icmp_net *icmp_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.icmp; -} - static bool icmp_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff, struct net *net, struct nf_conntrack_tuple *tuple) { @@ -103,7 +98,7 @@ static int icmp_packet(struct nf_conn *ct, } if (!timeout) - timeout = &icmp_pernet(nf_ct_net(ct))->timeout; + timeout = &nf_icmp_pernet(nf_ct_net(ct))->timeout; nf_ct_refresh_acct(ct, ctinfo, skb, *timeout); return NF_ACCEPT; @@ -275,7 +270,7 @@ static int icmp_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { unsigned int *timeout = data; - struct nf_icmp_net *in = icmp_pernet(net); + struct nf_icmp_net *in = nf_icmp_pernet(net); if (tb[CTA_TIMEOUT_ICMP_TIMEOUT]) { if (!timeout) @@ -337,7 +332,7 @@ static int icmp_kmemdup_sysctl_table(struct nf_proto_net *pn, static int icmp_init_net(struct net *net) { - struct nf_icmp_net *in = icmp_pernet(net); + struct nf_icmp_net *in = nf_icmp_pernet(net); struct nf_proto_net *pn = &in->pn; in->timeout = nf_ct_icmp_timeout; diff --git a/net/netfilter/nf_conntrack_proto_icmpv6.c b/net/netfilter/nf_conntrack_proto_icmpv6.c index 378618feed5d..a15eefb8e317 100644 --- a/net/netfilter/nf_conntrack_proto_icmpv6.c +++ b/net/netfilter/nf_conntrack_proto_icmpv6.c @@ -30,11 +30,6 @@ static const unsigned int nf_ct_icmpv6_timeout = 30*HZ; -static inline struct nf_icmp_net *icmpv6_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.icmpv6; -} - static bool icmpv6_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff, struct net *net, @@ -87,7 +82,7 @@ static bool icmpv6_invert_tuple(struct nf_conntrack_tuple *tuple, static unsigned int *icmpv6_get_timeouts(struct net *net) { - return &icmpv6_pernet(net)->timeout; + return &nf_icmpv6_pernet(net)->timeout; } /* Returns verdict for packet, or -1 for invalid. */ @@ -286,7 +281,7 @@ static int icmpv6_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { unsigned int *timeout = data; - struct nf_icmp_net *in = icmpv6_pernet(net); + struct nf_icmp_net *in = nf_icmpv6_pernet(net); if (!timeout) timeout = icmpv6_get_timeouts(net); @@ -348,7 +343,7 @@ static int icmpv6_kmemdup_sysctl_table(struct nf_proto_net *pn, static int icmpv6_init_net(struct net *net) { - struct nf_icmp_net *in = icmpv6_pernet(net); + struct nf_icmp_net *in = nf_icmpv6_pernet(net); struct nf_proto_net *pn = &in->pn; in->timeout = nf_ct_icmpv6_timeout; diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index 3d719d3eb9a3..d53e3e78f605 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -146,11 +146,6 @@ static const u8 sctp_conntracks[2][11][SCTP_CONNTRACK_MAX] = { } }; -static inline struct nf_sctp_net *sctp_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.sctp; -} - #ifdef CONFIG_NF_CONNTRACK_PROCFS /* Print out the private part of the conntrack. */ static void sctp_print_conntrack(struct seq_file *s, struct nf_conn *ct) @@ -480,7 +475,7 @@ static int sctp_packet(struct nf_conn *ct, timeouts = nf_ct_timeout_lookup(ct); if (!timeouts) - timeouts = sctp_pernet(nf_ct_net(ct))->timeouts; + timeouts = nf_sctp_pernet(nf_ct_net(ct))->timeouts; nf_ct_refresh_acct(ct, ctinfo, skb, timeouts[new_state]); @@ -599,7 +594,7 @@ static int sctp_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { unsigned int *timeouts = data; - struct nf_sctp_net *sn = sctp_pernet(net); + struct nf_sctp_net *sn = nf_sctp_pernet(net); int i; /* set default SCTP timeouts. */ @@ -736,7 +731,7 @@ static int sctp_kmemdup_sysctl_table(struct nf_proto_net *pn, static int sctp_init_net(struct net *net) { - struct nf_sctp_net *sn = sctp_pernet(net); + struct nf_sctp_net *sn = nf_sctp_pernet(net); struct nf_proto_net *pn = &sn->pn; if (!pn->users) { diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 1bcf9984d45e..4dcbd51a8e97 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -272,11 +272,6 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { } }; -static inline struct nf_tcp_net *tcp_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.tcp; -} - #ifdef CONFIG_NF_CONNTRACK_PROCFS /* Print out the private part of the conntrack. */ static void tcp_print_conntrack(struct seq_file *s, struct nf_conn *ct) @@ -475,7 +470,7 @@ static bool tcp_in_window(const struct nf_conn *ct, const struct tcphdr *tcph) { struct net *net = nf_ct_net(ct); - struct nf_tcp_net *tn = tcp_pernet(net); + struct nf_tcp_net *tn = nf_tcp_pernet(net); struct ip_ct_tcp_state *sender = &state->seen[dir]; struct ip_ct_tcp_state *receiver = &state->seen[!dir]; const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple; @@ -767,7 +762,7 @@ static noinline bool tcp_new(struct nf_conn *ct, const struct sk_buff *skb, { enum tcp_conntrack new_state; struct net *net = nf_ct_net(ct); - const struct nf_tcp_net *tn = tcp_pernet(net); + const struct nf_tcp_net *tn = nf_tcp_pernet(net); const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[0]; const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[1]; @@ -841,7 +836,7 @@ static int tcp_packet(struct nf_conn *ct, const struct nf_hook_state *state) { struct net *net = nf_ct_net(ct); - struct nf_tcp_net *tn = tcp_pernet(net); + struct nf_tcp_net *tn = nf_tcp_pernet(net); struct nf_conntrack_tuple *tuple; enum tcp_conntrack new_state, old_state; unsigned int index, *timeouts; @@ -1283,7 +1278,7 @@ static unsigned int tcp_nlattr_tuple_size(void) static int tcp_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { - struct nf_tcp_net *tn = tcp_pernet(net); + struct nf_tcp_net *tn = nf_tcp_pernet(net); unsigned int *timeouts = data; int i; @@ -1508,7 +1503,7 @@ static int tcp_kmemdup_sysctl_table(struct nf_proto_net *pn, static int tcp_init_net(struct net *net) { - struct nf_tcp_net *tn = tcp_pernet(net); + struct nf_tcp_net *tn = nf_tcp_pernet(net); struct nf_proto_net *pn = &tn->pn; if (!pn->users) { diff --git a/net/netfilter/nf_conntrack_proto_udp.c b/net/netfilter/nf_conntrack_proto_udp.c index a7aa70370913..c879d8d78cfd 100644 --- a/net/netfilter/nf_conntrack_proto_udp.c +++ b/net/netfilter/nf_conntrack_proto_udp.c @@ -32,14 +32,9 @@ static const unsigned int udp_timeouts[UDP_CT_MAX] = { [UDP_CT_REPLIED] = 180*HZ, }; -static inline struct nf_udp_net *udp_pernet(struct net *net) -{ - return &net->ct.nf_ct_proto.udp; -} - static unsigned int *udp_get_timeouts(struct net *net) { - return udp_pernet(net)->timeouts; + return nf_udp_pernet(net)->timeouts; } static void udp_error_log(const struct sk_buff *skb, @@ -212,7 +207,7 @@ static int udp_timeout_nlattr_to_obj(struct nlattr *tb[], struct net *net, void *data) { unsigned int *timeouts = data; - struct nf_udp_net *un = udp_pernet(net); + struct nf_udp_net *un = nf_udp_pernet(net); if (!timeouts) timeouts = un->timeouts; @@ -292,7 +287,7 @@ static int udp_kmemdup_sysctl_table(struct nf_proto_net *pn, static int udp_init_net(struct net *net) { - struct nf_udp_net *un = udp_pernet(net); + struct nf_udp_net *un = nf_udp_pernet(net); struct nf_proto_net *pn = &un->pn; if (!pn->users) { From 8866df9264a34e675b4ee8a151db819b87cce2d3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 2 Nov 2018 00:14:00 +0100 Subject: [PATCH 052/726] netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr Otherwise, we hit a NULL pointer deference since handlers always assume default timeout policy is passed. netlink: 24 bytes leftover after parsing attributes in process `syz-executor2'. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9575 Comm: syz-executor1 Not tainted 4.19.0+ #312 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:icmp_timeout_obj_to_nlattr+0x77/0x170 net/netfilter/nf_conntrack_proto_icmp.c:297 Fixes: c779e849608a ("netfilter: conntrack: remove get_timeout() indirection") Reported-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_cttimeout.c | 47 ++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 7 deletions(-) diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c index e7a50af1b3d6..a518eb162344 100644 --- a/net/netfilter/nfnetlink_cttimeout.c +++ b/net/netfilter/nfnetlink_cttimeout.c @@ -382,7 +382,8 @@ err: static int cttimeout_default_fill_info(struct net *net, struct sk_buff *skb, u32 portid, u32 seq, u32 type, int event, u16 l3num, - const struct nf_conntrack_l4proto *l4proto) + const struct nf_conntrack_l4proto *l4proto, + const unsigned int *timeouts) { struct nlmsghdr *nlh; struct nfgenmsg *nfmsg; @@ -408,7 +409,7 @@ cttimeout_default_fill_info(struct net *net, struct sk_buff *skb, u32 portid, if (!nest_parms) goto nla_put_failure; - ret = l4proto->ctnl_timeout.obj_to_nlattr(skb, NULL); + ret = l4proto->ctnl_timeout.obj_to_nlattr(skb, timeouts); if (ret < 0) goto nla_put_failure; @@ -430,6 +431,7 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl, struct netlink_ext_ack *extack) { const struct nf_conntrack_l4proto *l4proto; + unsigned int *timeouts = NULL; struct sk_buff *skb2; int ret, err; __u16 l3num; @@ -442,12 +444,44 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl, l4num = nla_get_u8(cda[CTA_TIMEOUT_L4PROTO]); l4proto = nf_ct_l4proto_find_get(l4num); - /* This protocol is not supported, skip. */ - if (l4proto->l4proto != l4num) { - err = -EOPNOTSUPP; + err = -EOPNOTSUPP; + if (l4proto->l4proto != l4num) goto err; + + switch (l4proto->l4proto) { + case IPPROTO_ICMP: + timeouts = &nf_icmp_pernet(net)->timeout; + break; + case IPPROTO_TCP: + timeouts = nf_tcp_pernet(net)->timeouts; + break; + case IPPROTO_UDP: + timeouts = nf_udp_pernet(net)->timeouts; + break; + case IPPROTO_DCCP: +#ifdef CONFIG_NF_CT_PROTO_DCCP + timeouts = nf_dccp_pernet(net)->dccp_timeout; +#endif + break; + case IPPROTO_ICMPV6: + timeouts = &nf_icmpv6_pernet(net)->timeout; + break; + case IPPROTO_SCTP: +#ifdef CONFIG_NF_CT_PROTO_SCTP + timeouts = nf_sctp_pernet(net)->timeouts; +#endif + break; + case 255: + timeouts = &nf_generic_pernet(net)->timeout; + break; + default: + WARN_ON_ONCE(1); + break; } + if (!timeouts) + goto err; + skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (skb2 == NULL) { err = -ENOMEM; @@ -458,8 +492,7 @@ static int cttimeout_default_get(struct net *net, struct sock *ctnl, nlh->nlmsg_seq, NFNL_MSG_TYPE(nlh->nlmsg_type), IPCTNL_MSG_TIMEOUT_DEFAULT_SET, - l3num, - l4proto); + l3num, l4proto, timeouts); if (ret <= 0) { kfree_skb(skb2); err = -ENOMEM; From e4844c9c62a0fe47980d6c3d4b7a096a5d755925 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 2 Nov 2018 11:33:37 +0100 Subject: [PATCH 053/726] netfilter: nft_compat: ebtables 'nat' table is normal chain type Unlike ip(6)tables, the ebtables nat table has no special properties. This bug causes 'ebtables -A' to fail when using a target such as 'snat' (ebt_snat target sets ".table = "nat"'). Targets that have no table restrictions work fine. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_compat.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 768292eac2a4..9d0ede474224 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -54,9 +54,11 @@ static bool nft_xt_put(struct nft_xt *xt) return false; } -static int nft_compat_chain_validate_dependency(const char *tablename, - const struct nft_chain *chain) +static int nft_compat_chain_validate_dependency(const struct nft_ctx *ctx, + const char *tablename) { + enum nft_chain_types type = NFT_CHAIN_T_DEFAULT; + const struct nft_chain *chain = ctx->chain; const struct nft_base_chain *basechain; if (!tablename || @@ -64,9 +66,12 @@ static int nft_compat_chain_validate_dependency(const char *tablename, return 0; basechain = nft_base_chain(chain); - if (strcmp(tablename, "nat") == 0 && - basechain->type->type != NFT_CHAIN_T_NAT) - return -EINVAL; + if (strcmp(tablename, "nat") == 0) { + if (ctx->family != NFPROTO_BRIDGE) + type = NFT_CHAIN_T_NAT; + if (basechain->type->type != type) + return -EINVAL; + } return 0; } @@ -342,8 +347,7 @@ static int nft_target_validate(const struct nft_ctx *ctx, if (target->hooks && !(hook_mask & target->hooks)) return -EINVAL; - ret = nft_compat_chain_validate_dependency(target->table, - ctx->chain); + ret = nft_compat_chain_validate_dependency(ctx, target->table); if (ret < 0) return ret; } @@ -590,8 +594,7 @@ static int nft_match_validate(const struct nft_ctx *ctx, if (match->hooks && !(hook_mask & match->hooks)) return -EINVAL; - ret = nft_compat_chain_validate_dependency(match->table, - ctx->chain); + ret = nft_compat_chain_validate_dependency(ctx, match->table); if (ret < 0) return ret; } From f393808dc64149ccd0e5a8427505ba2974a59854 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Thu, 25 Oct 2018 12:15:43 -0700 Subject: [PATCH 054/726] netfilter: conntrack: fix calculation of next bucket number in early_drop If there's no entry to drop in bucket that corresponds to the hash, early_drop() should look for it in other buckets. But since it increments hash instead of bucket number, it actually looks in the same bucket 8 times: hsize is 16k by default (14 bits) and hash is 32-bit value, so reciprocal_scale(hash, hsize) returns the same value for hash..hash+7 in most cases. Fix it by increasing bucket number instead of hash and rename _hash to bucket to avoid future confusion. Fixes: 3e86638e9a0b ("netfilter: conntrack: consider ct netns in early_drop logic") Cc: # v4.7+ Signed-off-by: Vasily Khoruzhick Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index ca1168d67fac..e92e749aff53 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1073,19 +1073,22 @@ static unsigned int early_drop_list(struct net *net, return drops; } -static noinline int early_drop(struct net *net, unsigned int _hash) +static noinline int early_drop(struct net *net, unsigned int hash) { - unsigned int i; + unsigned int i, bucket; for (i = 0; i < NF_CT_EVICTION_RANGE; i++) { struct hlist_nulls_head *ct_hash; - unsigned int hash, hsize, drops; + unsigned int hsize, drops; rcu_read_lock(); nf_conntrack_get_ht(&ct_hash, &hsize); - hash = reciprocal_scale(_hash++, hsize); + if (!i) + bucket = reciprocal_scale(hash, hsize); + else + bucket = (bucket + 1) % hsize; - drops = early_drop_list(net, &ct_hash[hash]); + drops = early_drop_list(net, &ct_hash[bucket]); rcu_read_unlock(); if (drops) { From e19e5be8b4cafa8b3f8b0cd1b1dfe20fa0145b83 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:08 +0100 Subject: [PATCH 055/726] s390/qeth: sanitize strings in debug messages As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 15 +++- drivers/s390/net/qeth_core_main.c | 127 ++++++++++++++---------------- drivers/s390/net/qeth_l2_main.c | 24 +++--- drivers/s390/net/qeth_l3_main.c | 104 ++++++++---------------- 4 files changed, 119 insertions(+), 151 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 6843bc7ee9f2..884ba9dfb341 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -87,6 +87,18 @@ struct qeth_dbf_info { #define SENSE_RESETTING_EVENT_BYTE 1 #define SENSE_RESETTING_EVENT_FLAG 0x80 +static inline u32 qeth_get_device_id(struct ccw_device *cdev) +{ + struct ccw_dev_id dev_id; + u32 id; + + ccw_device_get_id(cdev, &dev_id); + id = dev_id.devno; + id |= (u32) (dev_id.ssid << 16); + + return id; +} + /* * Common IO related definitions */ @@ -97,7 +109,8 @@ struct qeth_dbf_info { #define CARD_RDEV_ID(card) dev_name(&card->read.ccwdev->dev) #define CARD_WDEV_ID(card) dev_name(&card->write.ccwdev->dev) #define CARD_DDEV_ID(card) dev_name(&card->data.ccwdev->dev) -#define CHANNEL_ID(channel) dev_name(&channel->ccwdev->dev) +#define CCW_DEVID(cdev) (qeth_get_device_id(cdev)) +#define CARD_DEVID(card) (CCW_DEVID(CARD_RDEV(card))) /** * card stuff diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3274f13aad57..639ac0aca1e9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -554,8 +554,8 @@ static int __qeth_issue_next_read(struct qeth_card *card) if (!iob) { dev_warn(&card->gdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s issue_next_read failed: no iob " - "available\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "issue_next_read on device %x failed: no iob available\n", + CARD_DEVID(card)); return -ENOMEM; } qeth_setup_ccw(channel->ccw, CCW_CMD_READ, QETH_BUFSIZE, iob->data); @@ -563,8 +563,8 @@ static int __qeth_issue_next_read(struct qeth_card *card) rc = ccw_device_start(channel->ccwdev, channel->ccw, (addr_t) iob, 0, 0); if (rc) { - QETH_DBF_MESSAGE(2, "%s error in starting next read ccw! " - "rc=%i\n", dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "error %i on device %x when starting next read ccw!\n", + rc, CARD_DEVID(card)); atomic_set(&channel->irq_pending, 0); card->read_or_write_problem = 1; qeth_schedule_recovery(card); @@ -613,16 +613,14 @@ static void qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, int rc, const char *ipa_name; int com = cmd->hdr.command; ipa_name = qeth_get_ipa_cmd_name(com); + if (rc) - QETH_DBF_MESSAGE(2, "IPA: %s(x%X) for %s/%s returned " - "x%X \"%s\"\n", - ipa_name, com, dev_name(&card->gdev->dev), - QETH_CARD_IFNAME(card), rc, - qeth_get_ipa_msg(rc)); + QETH_DBF_MESSAGE(2, "IPA: %s(%#x) for device %x returned %#x \"%s\"\n", + ipa_name, com, CARD_DEVID(card), rc, + qeth_get_ipa_msg(rc)); else - QETH_DBF_MESSAGE(5, "IPA: %s(x%X) for %s/%s succeeded\n", - ipa_name, com, dev_name(&card->gdev->dev), - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(5, "IPA: %s(%#x) for device %x succeeded\n", + ipa_name, com, CARD_DEVID(card)); } static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card, @@ -711,7 +709,7 @@ static int qeth_check_idx_response(struct qeth_card *card, QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN); if ((buffer[2] & 0xc0) == 0xc0) { - QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#02x\n", + QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n", buffer[4]); QETH_CARD_TEXT(card, 2, "ckidxres"); QETH_CARD_TEXT(card, 2, " idxterm"); @@ -972,8 +970,8 @@ static int qeth_get_problem(struct qeth_card *card, struct ccw_device *cdev, QETH_CARD_TEXT(card, 2, "CGENCHK"); dev_warn(&cdev->dev, "The qeth device driver " "failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s check on device dstat=x%x, cstat=x%x\n", - dev_name(&cdev->dev), dstat, cstat); + QETH_DBF_MESSAGE(2, "check on channel %x with dstat=%#x, cstat=%#x\n", + CCW_DEVID(cdev), dstat, cstat); print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET, 16, 1, irb, 64, 1); return 1; @@ -1013,8 +1011,8 @@ static long qeth_check_irb_error(struct qeth_card *card, switch (PTR_ERR(irb)) { case -EIO: - QETH_DBF_MESSAGE(2, "%s i/o-error on device\n", - dev_name(&cdev->dev)); + QETH_DBF_MESSAGE(2, "i/o-error on channel %x\n", + CCW_DEVID(cdev)); QETH_CARD_TEXT(card, 2, "ckirberr"); QETH_CARD_TEXT_(card, 2, " rc%d", -EIO); break; @@ -1031,8 +1029,8 @@ static long qeth_check_irb_error(struct qeth_card *card, } break; default: - QETH_DBF_MESSAGE(2, "%s unknown error %ld on device\n", - dev_name(&cdev->dev), PTR_ERR(irb)); + QETH_DBF_MESSAGE(2, "unknown error %ld on channel %x\n", + PTR_ERR(irb), CCW_DEVID(cdev)); QETH_CARD_TEXT(card, 2, "ckirberr"); QETH_CARD_TEXT(card, 2, " rc???"); } @@ -1114,9 +1112,9 @@ static void qeth_irq(struct ccw_device *cdev, unsigned long intparm, dev_warn(&channel->ccwdev->dev, "The qeth device driver failed to recover " "an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s sense data available. cstat " - "0x%X dstat 0x%X\n", - dev_name(&channel->ccwdev->dev), cstat, dstat); + QETH_DBF_MESSAGE(2, "sense data available on channel %x: cstat %#X dstat %#X\n", + CCW_DEVID(channel->ccwdev), cstat, + dstat); print_hex_dump(KERN_WARNING, "qeth: irb ", DUMP_PREFIX_OFFSET, 16, 1, irb, 32, 1); print_hex_dump(KERN_WARNING, "qeth: sense data ", @@ -1890,8 +1888,8 @@ static int qeth_idx_activate_channel(struct qeth_card *card, if (channel->state != CH_STATE_ACTIVATING) { dev_warn(&channel->ccwdev->dev, "The qeth device driver" " failed to recover an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s IDX activate timed out\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX activate timed out on channel %x\n", + CCW_DEVID(channel->ccwdev)); QETH_DBF_TEXT_(SETUP, 2, "2err%d", -ETIME); return -ETIME; } @@ -1926,17 +1924,15 @@ static void qeth_idx_write_cb(struct qeth_card *card, "The adapter is used exclusively by another " "host\n"); else - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel:" - " negative reply\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n", + CCW_DEVID(channel->ccwdev)); goto out; } memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); if ((temp & ~0x0100) != qeth_peer_func_level(card->info.func_level)) { - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on write channel: " - "function level mismatch (sent: 0x%x, received: " - "0x%x)\n", dev_name(&channel->ccwdev->dev), - card->info.func_level, temp); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n", + CCW_DEVID(channel->ccwdev), + card->info.func_level, temp); goto out; } channel->state = CH_STATE_UP; @@ -1973,9 +1969,8 @@ static void qeth_idx_read_cb(struct qeth_card *card, "insufficient authorization\n"); break; default: - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel:" - " negative reply\n", - dev_name(&channel->ccwdev->dev)); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: negative reply\n", + CCW_DEVID(channel->ccwdev)); } QETH_CARD_TEXT_(card, 2, "idxread%c", QETH_IDX_ACT_CAUSE_CODE(iob->data)); @@ -1984,10 +1979,9 @@ static void qeth_idx_read_cb(struct qeth_card *card, memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2); if (temp != qeth_peer_func_level(card->info.func_level)) { - QETH_DBF_MESSAGE(2, "%s IDX_ACTIVATE on read channel: function " - "level mismatch (sent: 0x%x, received: 0x%x)\n", - dev_name(&channel->ccwdev->dev), - card->info.func_level, temp); + QETH_DBF_MESSAGE(2, "IDX_ACTIVATE on channel %x: function level mismatch (sent: %#x, received: %#x)\n", + CCW_DEVID(channel->ccwdev), + card->info.func_level, temp); goto out; } memcpy(&card->token.issuer_rm_r, @@ -2096,9 +2090,8 @@ int qeth_send_control_data(struct qeth_card *card, int len, (addr_t) iob, 0, 0, event_timeout); spin_unlock_irq(get_ccwdev_lock(channel->ccwdev)); if (rc) { - QETH_DBF_MESSAGE(2, "%s qeth_send_control_data: " - "ccw_device_start rc = %i\n", - dev_name(&channel->ccwdev->dev), rc); + QETH_DBF_MESSAGE(2, "qeth_send_control_data on device %x: ccw_device_start rc = %i\n", + CARD_DEVID(card), rc); QETH_CARD_TEXT_(card, 2, " err%d", rc); spin_lock_irq(&card->lock); list_del_init(&reply->list); @@ -2853,8 +2846,8 @@ struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *card, } else { dev_warn(&card->gdev->dev, "The qeth driver ran out of channel command buffers\n"); - QETH_DBF_MESSAGE(1, "%s The qeth driver ran out of channel command buffers", - dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(1, "device %x ran out of channel command buffers", + CARD_DEVID(card)); } return iob; @@ -2989,10 +2982,9 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, return 0; default: if (cmd->hdr.return_code) { - QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled " - "rc=%d\n", - dev_name(&card->gdev->dev), - cmd->hdr.return_code); + QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Unhandled rc=%#x\n", + CARD_DEVID(card), + cmd->hdr.return_code); return 0; } } @@ -3004,8 +2996,8 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; } else - QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected" - "\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(1, "IPA_CMD_QIPASSIST on device %x: Flawed LIC detected\n", + CARD_DEVID(card)); return 0; } @@ -4297,10 +4289,9 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, cmd->data.setadapterparms.hdr.return_code); if (cmd->data.setadapterparms.hdr.return_code != SET_ACCESS_CTRL_RC_SUCCESS) - QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n", - card->gdev->dev.kobj.name, - access_ctrl_req->subcmd_code, - cmd->data.setadapterparms.hdr.return_code); + QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%#x) on device %x: %#x\n", + access_ctrl_req->subcmd_code, CARD_DEVID(card), + cmd->data.setadapterparms.hdr.return_code); switch (cmd->data.setadapterparms.hdr.return_code) { case SET_ACCESS_CTRL_RC_SUCCESS: if (card->options.isolation == ISOLATION_MODE_NONE) { @@ -4312,14 +4303,14 @@ static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card, } break; case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED: - QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already " - "deactivated\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already deactivated\n", + CARD_DEVID(card)); if (fallback) card->options.isolation = card->options.prev_isolation; break; case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED: - QETH_DBF_MESSAGE(2, "%s QDIO data connection isolation already" - " activated\n", dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "QDIO data connection isolation on device %x already activated\n", + CARD_DEVID(card)); if (fallback) card->options.isolation = card->options.prev_isolation; break; @@ -4405,10 +4396,8 @@ int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback) rc = qeth_setadpparms_set_access_ctrl(card, card->options.isolation, fallback); if (rc) { - QETH_DBF_MESSAGE(3, - "IPA(SET_ACCESS_CTRL,%s,%d) sent failed\n", - card->gdev->dev.kobj.name, - rc); + QETH_DBF_MESSAGE(3, "IPA(SET_ACCESS_CTRL(%d) on device %x: sent failed\n", + rc, CARD_DEVID(card)); rc = -EOPNOTSUPP; } } else if (card->options.isolation != ISOLATION_MODE_NONE) { @@ -4634,8 +4623,8 @@ static int qeth_snmp_command(struct qeth_card *card, char __user *udata) rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, qeth_snmp_command_cb, (void *)&qinfo); if (rc) - QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n", - QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "SNMP command failed on device %x: (%#x)\n", + CARD_DEVID(card), rc); else { if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) rc = -EFAULT; @@ -4869,8 +4858,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) rc = qeth_read_conf_data(card, (void **) &prcd, &length); if (rc) { - QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n", - dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "qeth_read_conf_data on device %x returned %i\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc); goto out_offline; } @@ -5096,8 +5085,8 @@ int qeth_core_hardsetup_card(struct qeth_card *card) qeth_update_from_chp_desc(card); retry: if (retries < 3) - QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n", - dev_name(&card->gdev->dev)); + QETH_DBF_MESSAGE(2, "Retrying to do IDX activates on device %x.\n", + CARD_DEVID(card)); rc = qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD); ccw_device_set_offline(CARD_DDEV(card)); ccw_device_set_offline(CARD_WDEV(card)); @@ -5201,8 +5190,8 @@ retriable: out: dev_warn(&card->gdev->dev, "The qeth device driver failed to recover " "an error on the device\n"); - QETH_DBF_MESSAGE(2, "%s Initialization in hardsetup failed! rc=%d\n", - dev_name(&card->gdev->dev), rc); + QETH_DBF_MESSAGE(2, "Initialization for device %x failed in hardsetup! rc=%d\n", + CARD_DEVID(card), rc); return rc; } EXPORT_SYMBOL_GPL(qeth_core_hardsetup_card); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 23aaf373f631..5b67fd1f2b77 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -146,11 +146,11 @@ static int qeth_l2_write_mac(struct qeth_card *card, u8 *mac) QETH_CARD_TEXT(card, 2, "L2Wmac"); rc = qeth_l2_send_setdelmac(card, mac, cmd); if (rc == -EEXIST) - QETH_DBF_MESSAGE(2, "MAC %pM already registered on %s\n", - mac, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "MAC already registered on device %x\n", + CARD_DEVID(card)); else if (rc) - QETH_DBF_MESSAGE(2, "Failed to register MAC %pM on %s: %d\n", - mac, QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "Failed to register MAC on device %x: %d\n", + CARD_DEVID(card), rc); return rc; } @@ -163,8 +163,8 @@ static int qeth_l2_remove_mac(struct qeth_card *card, u8 *mac) QETH_CARD_TEXT(card, 2, "L2Rmac"); rc = qeth_l2_send_setdelmac(card, mac, cmd); if (rc) - QETH_DBF_MESSAGE(2, "Failed to delete MAC %pM on %s: %d\n", - mac, QETH_CARD_IFNAME(card), rc); + QETH_DBF_MESSAGE(2, "Failed to delete MAC on device %u: %d\n", + CARD_DEVID(card), rc); return rc; } @@ -260,9 +260,9 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, QETH_CARD_TEXT(card, 2, "L2sdvcb"); if (cmd->hdr.return_code) { - QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x.\n", + QETH_DBF_MESSAGE(2, "Error in processing VLAN %u on device %x: %#x.\n", cmd->data.setdelvlan.vlan_id, - QETH_CARD_IFNAME(card), cmd->hdr.return_code); + CARD_DEVID(card), cmd->hdr.return_code); QETH_CARD_TEXT_(card, 2, "L2VL%4x", cmd->hdr.command); QETH_CARD_TEXT_(card, 2, "err%d", cmd->hdr.return_code); } @@ -455,8 +455,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_vm_request_mac(card); if (!rc) goto out; - QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "z/VM MAC Service failed on device %x: %#x\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "err%04x", rc); /* fall back to alternative mechanism: */ } @@ -468,8 +468,8 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_setadpparms_change_macaddr(card); if (!rc) goto out; - QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "READ_MAC Assist failed on device %x: %#x\n", + CARD_DEVID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "1err%04x", rc); /* fall back once more: */ } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 0b161cc1fd2e..ffa2aa1dd4c5 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -494,9 +494,8 @@ int qeth_l3_setrouting_v4(struct qeth_card *card) QETH_PROT_IPV4); if (rc) { card->options.route4.type = NO_ROUTER; - QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" - " on %s. Type set to 'no router'.\n", rc, - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n", + rc, CARD_DEVID(card)); } return rc; } @@ -518,9 +517,8 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) QETH_PROT_IPV6); if (rc) { card->options.route6.type = NO_ROUTER; - QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" - " on %s. Type set to 'no router'.\n", rc, - QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (%#06x) while setting routing type on device %x. Type set to 'no router'.\n", + rc, CARD_DEVID(card)); } return rc; } @@ -1070,8 +1068,8 @@ qeth_diags_trace_cb(struct qeth_card *card, struct qeth_reply *reply, } break; default: - QETH_DBF_MESSAGE(2, "Unknown sniffer action (0x%04x) on %s\n", - cmd->data.diagass.action, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Unknown sniffer action (%#06x) on device %x\n", + cmd->data.diagass.action, CARD_DEVID(card)); } return 0; @@ -1517,32 +1515,25 @@ static void qeth_l3_set_rx_mode(struct net_device *dev) qeth_l3_handle_promisc_mode(card); } -static const char *qeth_l3_arp_get_error_cause(int *rc) +static int qeth_l3_arp_makerc(int rc) { - switch (*rc) { - case QETH_IPA_ARP_RC_FAILED: - *rc = -EIO; - return "operation failed"; + switch (rc) { + case IPA_RC_SUCCESS: + return 0; case QETH_IPA_ARP_RC_NOTSUPP: - *rc = -EOPNOTSUPP; - return "operation not supported"; - case QETH_IPA_ARP_RC_OUT_OF_RANGE: - *rc = -EINVAL; - return "argument out of range"; case QETH_IPA_ARP_RC_Q_NOTSUPP: - *rc = -EOPNOTSUPP; - return "query operation not supported"; + return -EOPNOTSUPP; + case QETH_IPA_ARP_RC_OUT_OF_RANGE: + return -EINVAL; case QETH_IPA_ARP_RC_Q_NO_DATA: - *rc = -ENOENT; - return "no query data available"; + return -ENOENT; default: - return "unknown error"; + return -EIO; } } static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) { - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arpstnoe"); @@ -1560,13 +1551,10 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_SET_NO_ENTRIES, no_entries); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on " - "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static __u32 get_arp_entry_size(struct qeth_card *card, @@ -1716,7 +1704,6 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card, { struct qeth_cmd_buffer *iob; struct qeth_ipa_cmd *cmd; - int tmp; int rc; QETH_CARD_TEXT_(card, 3, "qarpipv%i", prot); @@ -1735,15 +1722,10 @@ static int qeth_l3_query_arp_cache_info(struct qeth_card *card, rc = qeth_l3_send_ipa_arp_cmd(card, iob, QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN, qeth_l3_arp_query_cb, (void *)qinfo); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, - "Error while querying ARP cache on %s: %s " - "(0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Error while querying ARP cache on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) @@ -1797,8 +1779,6 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, struct qeth_arp_cache_entry *entry) { struct qeth_cmd_buffer *iob; - char buf[16]; - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arpadent"); @@ -1824,14 +1804,10 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, sizeof(struct qeth_arp_cache_entry), (unsigned long) entry, qeth_setassparms_cb, NULL); - if (rc) { - tmp = rc; - qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s " - "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not add ARP entry on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_remove_entry(struct qeth_card *card, @@ -1839,7 +1815,6 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, { struct qeth_cmd_buffer *iob; char buf[16] = {0, }; - int tmp; int rc; QETH_CARD_TEXT(card, 3, "arprment"); @@ -1864,21 +1839,15 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, rc = qeth_send_setassparms(card, iob, 12, (unsigned long)buf, qeth_setassparms_cb, NULL); - if (rc) { - tmp = rc; - memset(buf, 0, 16); - qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s" - " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not delete ARP entry on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_arp_flush_cache(struct qeth_card *card) { int rc; - int tmp; QETH_CARD_TEXT(card, 3, "arpflush"); @@ -1894,13 +1863,10 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card) } rc = qeth_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); - if (rc) { - tmp = rc; - QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s " - "(0x%x/%d)\n", QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); - } - return rc; + if (rc) + QETH_DBF_MESSAGE(2, "Could not flush ARP cache on device %x: %#x\n", + CARD_DEVID(card), rc); + return qeth_l3_arp_makerc(rc); } static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) From bd74a7f9cc033cf4d405788f80292268987dc0c5 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:09 +0100 Subject: [PATCH 056/726] s390/qeth: fix HiperSockets sniffer Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index ffa2aa1dd4c5..968e344a240b 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -278,9 +278,6 @@ static void qeth_l3_clear_ip_htable(struct qeth_card *card, int recover) QETH_CARD_TEXT(card, 4, "clearip"); - if (recover && card->options.sniffer) - return; - spin_lock_bh(&card->ip_lock); hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) { @@ -661,6 +658,8 @@ static int qeth_l3_register_addr_entry(struct qeth_card *card, int rc = 0; int cnt = 3; + if (card->options.sniffer) + return 0; if (addr->proto == QETH_PROT_IPV4) { QETH_CARD_TEXT(card, 2, "setaddr4"); @@ -695,6 +694,9 @@ static int qeth_l3_deregister_addr_entry(struct qeth_card *card, { int rc = 0; + if (card->options.sniffer) + return 0; + if (addr->proto == QETH_PROT_IPV4) { QETH_CARD_TEXT(card, 2, "deladdr4"); QETH_CARD_HEX(card, 3, &addr->u.a4.addr, sizeof(int)); From 30356d08159d7899438e94503ae322a8b881e205 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:10 +0100 Subject: [PATCH 057/726] s390/qeth: unregister netdevice only when registered qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 5 +++++ drivers/s390/net/qeth_l2_main.c | 5 +++-- drivers/s390/net/qeth_l3_main.c | 5 +++-- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 884ba9dfb341..b3a0b8838d2f 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -843,6 +843,11 @@ struct qeth_trap_id { /*some helper functions*/ #define QETH_CARD_IFNAME(card) (((card)->dev)? (card)->dev->name : "") +static inline bool qeth_netdev_is_registered(struct net_device *dev) +{ + return dev->netdev_ops != NULL; +} + static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf, unsigned int elements) { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 5b67fd1f2b77..2b978eba7e30 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -826,7 +826,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_l2_set_offline(cgdev); - unregister_netdev(card->dev); + if (qeth_netdev_is_registered(card->dev)) + unregister_netdev(card->dev); } static const struct ethtool_ops qeth_l2_ethtool_ops = { @@ -866,7 +867,7 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) { int rc; - if (card->dev->netdev_ops) + if (qeth_netdev_is_registered(card->dev)) return 0; card->dev->priv_flags |= IFF_UNICAST_FLT; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 968e344a240b..a719c5ec4171 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2356,7 +2356,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) unsigned int headroom; int rc; - if (card->dev->netdev_ops) + if (qeth_netdev_is_registered(card->dev)) return 0; if (card->info.type == QETH_CARD_TYPE_OSD || @@ -2465,7 +2465,8 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev) if (cgdev->state == CCWGROUP_ONLINE) qeth_l3_set_offline(cgdev); - unregister_netdev(card->dev); + if (qeth_netdev_is_registered(card->dev)) + unregister_netdev(card->dev); qeth_l3_clear_ip_htable(card, 0); qeth_l3_clear_ipato_list(card); } From 9fae5c3b60396b8586881a0e7c028ae5bcaeaa3f Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:11 +0100 Subject: [PATCH 058/726] s390/qeth: fix initial operstate Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 2 +- drivers/s390/net/qeth_core_main.c | 13 ++++++++++--- drivers/s390/net/qeth_l2_main.c | 10 +++++++--- drivers/s390/net/qeth_l3_main.c | 10 +++++++--- 4 files changed, 25 insertions(+), 10 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index b3a0b8838d2f..90cb213b0d55 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -991,7 +991,7 @@ int qeth_wait_for_threads(struct qeth_card *, unsigned long); int qeth_do_run_thread(struct qeth_card *, unsigned long); void qeth_clear_thread_start_bit(struct qeth_card *, unsigned long); void qeth_clear_thread_running_bit(struct qeth_card *, unsigned long); -int qeth_core_hardsetup_card(struct qeth_card *); +int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 639ac0aca1e9..aed1a7961553 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5075,7 +5075,7 @@ static struct ccw_driver qeth_ccw_driver = { .remove = ccwgroup_remove_ccwdev, }; -int qeth_core_hardsetup_card(struct qeth_card *card) +int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok) { int retries = 3; int rc; @@ -5150,13 +5150,20 @@ retriable: if (rc == IPA_RC_LAN_OFFLINE) { dev_warn(&card->gdev->dev, "The LAN is offline\n"); - netif_carrier_off(card->dev); + *carrier_ok = false; } else { rc = -ENODEV; goto out; } } else { - netif_carrier_on(card->dev); + *carrier_ok = true; + } + + if (qeth_netdev_is_registered(card->dev)) { + if (*carrier_ok) + netif_carrier_on(card->dev); + else + netif_carrier_off(card->dev); } card->options.ipa4.supported_funcs = 0; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2b978eba7e30..2914a1a69f83 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -863,7 +863,7 @@ static const struct net_device_ops qeth_l2_netdev_ops = { .ndo_set_features = qeth_set_features }; -static int qeth_l2_setup_netdev(struct qeth_card *card) +static int qeth_l2_setup_netdev(struct qeth_card *card, bool carrier_ok) { int rc; @@ -920,6 +920,9 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) qeth_l2_request_initial_mac(card); netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT); rc = register_netdev(card->dev); + if (!rc && carrier_ok) + netif_carrier_on(card->dev); + if (rc) card->dev->netdev_ops = NULL; return rc; @@ -950,6 +953,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) struct qeth_card *card = dev_get_drvdata(&gdev->dev); int rc = 0; enum qeth_card_states recover_flag; + bool carrier_ok; mutex_lock(&card->discipline_mutex); mutex_lock(&card->conf_mutex); @@ -957,7 +961,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); recover_flag = card->state; - rc = qeth_core_hardsetup_card(card); + rc = qeth_core_hardsetup_card(card, &carrier_ok); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); rc = -ENODEV; @@ -968,7 +972,7 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) dev_info(&card->gdev->dev, "The device represents a Bridge Capable Port\n"); - rc = qeth_l2_setup_netdev(card); + rc = qeth_l2_setup_netdev(card, carrier_ok); if (rc) goto out_remove; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index a719c5ec4171..b26f7d7a2ca0 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2351,7 +2351,7 @@ static const struct net_device_ops qeth_l3_osa_netdev_ops = { .ndo_neigh_setup = qeth_l3_neigh_setup, }; -static int qeth_l3_setup_netdev(struct qeth_card *card) +static int qeth_l3_setup_netdev(struct qeth_card *card, bool carrier_ok) { unsigned int headroom; int rc; @@ -2425,6 +2425,9 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT); rc = register_netdev(card->dev); + if (!rc && carrier_ok) + netif_carrier_on(card->dev); + out: if (rc) card->dev->netdev_ops = NULL; @@ -2476,6 +2479,7 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) struct qeth_card *card = dev_get_drvdata(&gdev->dev); int rc = 0; enum qeth_card_states recover_flag; + bool carrier_ok; mutex_lock(&card->discipline_mutex); mutex_lock(&card->conf_mutex); @@ -2483,14 +2487,14 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); recover_flag = card->state; - rc = qeth_core_hardsetup_card(card); + rc = qeth_core_hardsetup_card(card, &carrier_ok); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); rc = -ENODEV; goto out_remove; } - rc = qeth_l3_setup_netdev(card); + rc = qeth_l3_setup_netdev(card, carrier_ok); if (rc) goto out_remove; From 125d7d30111738a5bdafacc1ed87cd3d7f32b4ea Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:12 +0100 Subject: [PATCH 059/726] s390/qeth: sanitize ARP requests The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 5 -- drivers/s390/net/qeth_core_main.c | 12 ++-- drivers/s390/net/qeth_core_mpc.h | 2 +- drivers/s390/net/qeth_l3_main.c | 94 +++++++++---------------------- 4 files changed, 34 insertions(+), 79 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 90cb213b0d55..04e294d1d16d 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -1046,11 +1046,6 @@ int qeth_configure_cq(struct qeth_card *, enum qeth_cq); int qeth_hw_trap(struct qeth_card *, enum qeth_diags_trap_action); void qeth_trace_features(struct qeth_card *); void qeth_close_dev(struct qeth_card *); -int qeth_send_setassparms(struct qeth_card *, struct qeth_cmd_buffer *, __u16, - long, - int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, unsigned long), - void *); int qeth_setassparms_cb(struct qeth_card *, struct qeth_reply *, unsigned long); struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs, diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index aed1a7961553..82282b2092d8 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -5477,11 +5477,12 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *card, } EXPORT_SYMBOL_GPL(qeth_get_setassparms_cmd); -int qeth_send_setassparms(struct qeth_card *card, - struct qeth_cmd_buffer *iob, __u16 len, long data, - int (*reply_cb)(struct qeth_card *, - struct qeth_reply *, unsigned long), - void *reply_param) +static int qeth_send_setassparms(struct qeth_card *card, + struct qeth_cmd_buffer *iob, u16 len, + long data, int (*reply_cb)(struct qeth_card *, + struct qeth_reply *, + unsigned long), + void *reply_param) { int rc; struct qeth_ipa_cmd *cmd; @@ -5497,7 +5498,6 @@ int qeth_send_setassparms(struct qeth_card *card, rc = qeth_send_ipa_cmd(card, iob, reply_cb, reply_param); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_setassparms); int qeth_send_simple_setassparms_prot(struct qeth_card *card, enum qeth_ipa_funcs ipa_func, diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index e85090467afe..80c036acf563 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -436,7 +436,7 @@ struct qeth_ipacmd_setassparms { __u32 flags_32bit; struct qeth_ipa_caps caps; struct qeth_checksum_cmd chksum; - struct qeth_arp_cache_entry add_arp_entry; + struct qeth_arp_cache_entry arp_entry; struct qeth_arp_query_data query_arp; struct qeth_tso_start_data tso; __u8 ip[16]; diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index b26f7d7a2ca0..f08b745c2007 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1777,13 +1777,18 @@ out: return rc; } -static int qeth_l3_arp_add_entry(struct qeth_card *card, - struct qeth_arp_cache_entry *entry) +static int qeth_l3_arp_modify_entry(struct qeth_card *card, + struct qeth_arp_cache_entry *entry, + enum qeth_arp_process_subcmds arp_cmd) { + struct qeth_arp_cache_entry *cmd_entry; struct qeth_cmd_buffer *iob; int rc; - QETH_CARD_TEXT(card, 3, "arpadent"); + if (arp_cmd == IPA_CMD_ASS_ARP_ADD_ENTRY) + QETH_CARD_TEXT(card, 3, "arpadd"); + else + QETH_CARD_TEXT(card, 3, "arpdel"); /* * currently GuestLAN only supports the ARP assist function @@ -1796,54 +1801,19 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, return -EOPNOTSUPP; } - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_ADD_ENTRY, - sizeof(struct qeth_arp_cache_entry), - QETH_PROT_IPV4); + iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, arp_cmd, + sizeof(*cmd_entry), QETH_PROT_IPV4); if (!iob) return -ENOMEM; - rc = qeth_send_setassparms(card, iob, - sizeof(struct qeth_arp_cache_entry), - (unsigned long) entry, - qeth_setassparms_cb, NULL); + + cmd_entry = &__ipa_cmd(iob)->data.setassparms.data.arp_entry; + ether_addr_copy(cmd_entry->macaddr, entry->macaddr); + memcpy(cmd_entry->ipaddr, entry->ipaddr, 4); + rc = qeth_send_ipa_cmd(card, iob, qeth_setassparms_cb, NULL); if (rc) - QETH_DBF_MESSAGE(2, "Could not add ARP entry on device %x: %#x\n", - CARD_DEVID(card), rc); - return qeth_l3_arp_makerc(rc); -} + QETH_DBF_MESSAGE(2, "Could not modify (cmd: %#x) ARP entry on device %x: %#x\n", + arp_cmd, CARD_DEVID(card), rc); -static int qeth_l3_arp_remove_entry(struct qeth_card *card, - struct qeth_arp_cache_entry *entry) -{ - struct qeth_cmd_buffer *iob; - char buf[16] = {0, }; - int rc; - - QETH_CARD_TEXT(card, 3, "arprment"); - - /* - * currently GuestLAN only supports the ARP assist function - * IPA_CMD_ASS_ARP_QUERY_INFO, but not IPA_CMD_ASS_ARP_REMOVE_ENTRY; - * thus we say EOPNOTSUPP for this ARP function - */ - if (card->info.guestlan) - return -EOPNOTSUPP; - if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - return -EOPNOTSUPP; - } - memcpy(buf, entry, 12); - iob = qeth_get_setassparms_cmd(card, IPA_ARP_PROCESSING, - IPA_CMD_ASS_ARP_REMOVE_ENTRY, - 12, - QETH_PROT_IPV4); - if (!iob) - return -ENOMEM; - rc = qeth_send_setassparms(card, iob, - 12, (unsigned long)buf, - qeth_setassparms_cb, NULL); - if (rc) - QETH_DBF_MESSAGE(2, "Could not delete ARP entry on device %x: %#x\n", - CARD_DEVID(card), rc); return qeth_l3_arp_makerc(rc); } @@ -1875,6 +1845,7 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct qeth_card *card = dev->ml_priv; struct qeth_arp_cache_entry arp_entry; + enum qeth_arp_process_subcmds arp_cmd; int rc = 0; switch (cmd) { @@ -1893,27 +1864,16 @@ static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = qeth_l3_arp_query(card, rq->ifr_ifru.ifru_data); break; case SIOC_QETH_ARP_ADD_ENTRY: - if (!capable(CAP_NET_ADMIN)) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_l3_arp_add_entry(card, &arp_entry); - break; case SIOC_QETH_ARP_REMOVE_ENTRY: - if (!capable(CAP_NET_ADMIN)) { - rc = -EPERM; - break; - } - if (copy_from_user(&arp_entry, rq->ifr_ifru.ifru_data, - sizeof(struct qeth_arp_cache_entry))) - rc = -EFAULT; - else - rc = qeth_l3_arp_remove_entry(card, &arp_entry); - break; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&arp_entry, rq->ifr_data, sizeof(arp_entry))) + return -EFAULT; + + arp_cmd = (cmd == SIOC_QETH_ARP_ADD_ENTRY) ? + IPA_CMD_ASS_ARP_ADD_ENTRY : + IPA_CMD_ASS_ARP_REMOVE_ENTRY; + return qeth_l3_arp_modify_entry(card, &arp_entry, arp_cmd); case SIOC_QETH_ARP_FLUSH_CACHE: if (!capable(CAP_NET_ADMIN)) { rc = -EPERM; From 54e049c227d9968ff6a7d80aae5fec27b54d39da Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Fri, 2 Nov 2018 19:04:13 +0100 Subject: [PATCH 060/726] s390/qeth: report 25Gbit link speed This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 20 ++++++++++++++++++-- drivers/s390/net/qeth_core_mpc.h | 2 ++ 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 82282b2092d8..4bce5ae65a55 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -167,6 +167,8 @@ const char *qeth_get_cardname_short(struct qeth_card *card) return "OSD_1000"; case QETH_LINK_TYPE_10GBIT_ETH: return "OSD_10GIG"; + case QETH_LINK_TYPE_25GBIT_ETH: + return "OSD_25GIG"; case QETH_LINK_TYPE_LANE_ETH100: return "OSD_FE_LANE"; case QETH_LINK_TYPE_LANE_TR: @@ -4432,7 +4434,8 @@ static int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) rc = BMCR_FULLDPLX; if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH) && (card->info.link_type != QETH_LINK_TYPE_OSN) && - (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) + (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH) && + (card->info.link_type != QETH_LINK_TYPE_25GBIT_ETH)) rc |= BMCR_SPEED100; break; case MII_BMSR: /* Basic mode status register */ @@ -6166,8 +6169,14 @@ static void qeth_set_cmd_adv_sup(struct ethtool_link_ksettings *cmd, WARN_ON_ONCE(1); } - /* fallthrough from high to low, to select all legal speeds: */ + /* partially does fall through, to also select lower speeds */ switch (maxspeed) { + case SPEED_25000: + ethtool_link_ksettings_add_link_mode(cmd, supported, + 25000baseSR_Full); + ethtool_link_ksettings_add_link_mode(cmd, advertising, + 25000baseSR_Full); + break; case SPEED_10000: ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full); @@ -6250,6 +6259,10 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev, cmd->base.speed = SPEED_10000; cmd->base.port = PORT_FIBRE; break; + case QETH_LINK_TYPE_25GBIT_ETH: + cmd->base.speed = SPEED_25000; + cmd->base.port = PORT_FIBRE; + break; default: cmd->base.speed = SPEED_10; cmd->base.port = PORT_TP; @@ -6316,6 +6329,9 @@ int qeth_core_ethtool_get_link_ksettings(struct net_device *netdev, case CARD_INFO_PORTS_10G: cmd->base.speed = SPEED_10000; break; + case CARD_INFO_PORTS_25G: + cmd->base.speed = SPEED_25000; + break; } return 0; diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h index 80c036acf563..3e54be201b27 100644 --- a/drivers/s390/net/qeth_core_mpc.h +++ b/drivers/s390/net/qeth_core_mpc.h @@ -90,6 +90,7 @@ enum qeth_link_types { QETH_LINK_TYPE_GBIT_ETH = 0x03, QETH_LINK_TYPE_OSN = 0x04, QETH_LINK_TYPE_10GBIT_ETH = 0x10, + QETH_LINK_TYPE_25GBIT_ETH = 0x12, QETH_LINK_TYPE_LANE_ETH100 = 0x81, QETH_LINK_TYPE_LANE_TR = 0x82, QETH_LINK_TYPE_LANE_ETH1000 = 0x83, @@ -347,6 +348,7 @@ enum qeth_card_info_port_speed { CARD_INFO_PORTS_100M = 0x00000006, CARD_INFO_PORTS_1G = 0x00000007, CARD_INFO_PORTS_10G = 0x00000008, + CARD_INFO_PORTS_25G = 0x0000000A, }; /* (SET)DELIP(M) IPA stuff ***************************************************/ From 9e4028935cca3f9ef9b6a90df9da6f1f94853536 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Sat, 3 Nov 2018 16:13:17 -0400 Subject: [PATCH 061/726] ext4: avoid potential extra brelse in setup_new_flex_group_blocks() Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 3.3+ --- fs/ext4/resize.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index ebbc663d0798..c3fa30878ca8 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -605,7 +605,6 @@ handle_bb: bh = bclean(handle, sb, block); if (IS_ERR(bh)) { err = PTR_ERR(bh); - bh = NULL; goto out; } overhead = ext4_group_overhead_blocks(sb, group); @@ -618,9 +617,9 @@ handle_bb: ext4_mark_bitmap_end(EXT4_B2C(sbi, group_data[i].blocks_count), sb->s_blocksize * 8, bh->b_data); err = ext4_handle_dirty_metadata(handle, NULL, bh); + brelse(bh); if (err) goto out; - brelse(bh); handle_ib: if (bg_flags[i] & EXT4_BG_INODE_UNINIT) @@ -635,18 +634,16 @@ handle_ib: bh = bclean(handle, sb, block); if (IS_ERR(bh)) { err = PTR_ERR(bh); - bh = NULL; goto out; } ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), sb->s_blocksize * 8, bh->b_data); err = ext4_handle_dirty_metadata(handle, NULL, bh); + brelse(bh); if (err) goto out; - brelse(bh); } - bh = NULL; /* Mark group tables in block bitmap */ for (j = 0; j < GROUP_TABLE_COUNT; j++) { @@ -685,7 +682,6 @@ handle_ib: } out: - brelse(bh); err2 = ext4_journal_stop(handle); if (err2 && !err) err = err2; From cea5794122125bf67559906a0762186cf417099c Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Sat, 3 Nov 2018 16:22:10 -0400 Subject: [PATCH 062/726] ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Cc: stable@kernel.org # 3.3 Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o --- fs/ext4/resize.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index c3fa30878ca8..0a4dc6217e78 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -459,16 +459,18 @@ static int set_flexbg_block_bitmap(struct super_block *sb, handle_t *handle, BUFFER_TRACE(bh, "get_write_access"); err = ext4_journal_get_write_access(handle, bh); - if (err) + if (err) { + brelse(bh); return err; + } ext4_debug("mark block bitmap %#04llx (+%llu/%u)\n", first_cluster, first_cluster - start, count2); ext4_set_bits(bh->b_data, first_cluster - start, count2); err = ext4_handle_dirty_metadata(handle, NULL, bh); + brelse(bh); if (unlikely(err)) return err; - brelse(bh); } return 0; From 61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Sat, 3 Nov 2018 16:50:08 -0400 Subject: [PATCH 063/726] ext4: add missing brelse() add_new_gdb_meta_bg()'s error path Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 3.7 --- fs/ext4/resize.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 0a4dc6217e78..7131f35b62d9 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -922,6 +922,7 @@ static int add_new_gdb_meta_bg(struct super_block *sb, sizeof(struct buffer_head *), GFP_NOFS); if (!n_group_desc) { + brelse(gdb_bh); err = -ENOMEM; ext4_warning(sb, "not enough memory for %lu groups", gdb_num + 1); @@ -937,8 +938,6 @@ static int add_new_gdb_meta_bg(struct super_block *sb, kvfree(o_group_desc); BUFFER_TRACE(gdb_bh, "get_write_access"); err = ext4_journal_get_write_access(handle, gdb_bh); - if (unlikely(err)) - brelse(gdb_bh); return err; } From ea0abbb648452cdb6e1734b702b6330a7448fcf8 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Sat, 3 Nov 2018 17:11:19 -0400 Subject: [PATCH 064/726] ext4: add missing brelse() update_backups()'s error path Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 2.6.19 --- fs/ext4/resize.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 7131f35b62d9..3df326ee6d50 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1121,8 +1121,10 @@ static void update_backups(struct super_block *sb, sector_t blk_off, char *data, backup_block, backup_block - ext4_group_first_block_no(sb, group)); BUFFER_TRACE(bh, "get_write_access"); - if ((err = ext4_journal_get_write_access(handle, bh))) + if ((err = ext4_journal_get_write_access(handle, bh))) { + brelse(bh); break; + } lock_buffer(bh); memcpy(bh->b_data, data, size); if (rest) From 3e59020abf0f88182730527ee5b862e786eb485a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 31 Oct 2018 08:39:12 -0700 Subject: [PATCH 065/726] net: bql: add __netdev_tx_sent_queue() When qdisc_run() tries to use BQL budget to bulk-dequeue a batch of packets, GSO can later transform this list in another list of skbs, and each skb is sent to device ndo_start_xmit(), one at a time, with skb->xmit_more being set to one but for last skb. Problem is that very often, BQL limit is hit in the middle of the packet train, forcing dev_hard_start_xmit() to stop the bulk send and requeue the end of the list. BQL role is to avoid head of line blocking, making sure a qdisc can deliver high priority packets before low priority ones. But there is no way requeued packets can be bypassed by fresh packets in the qdisc. Aborting the bulk send increases TX softirqs, and hot cache lines (after skb_segment()) are wasted. Note that for TSO packets, we never split a packet in the middle because of BQL limit being hit. Drivers should be able to update BQL counters without flipping/caring about BQL status, if the current skb has xmit_more set. Upper layers are ultimately responsible to stop sending another packet train when BQL limit is hit. Code template in a driver might look like the following : send_doorbell = __netdev_tx_sent_queue(tx_queue, nr_bytes, skb->xmit_more); Note that __netdev_tx_sent_queue() use is not mandatory, since following patch will change dev_hard_start_xmit() to not care about BQL status. But it is highly recommended so that xmit_more full benefits can be reached (less doorbells sent, and less atomic operations as well) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index dc1d9ed33b31..857f8abf7b91 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3190,6 +3190,26 @@ static inline void netdev_tx_sent_queue(struct netdev_queue *dev_queue, #endif } +/* Variant of netdev_tx_sent_queue() for drivers that are aware + * that they should not test BQL status themselves. + * We do want to change __QUEUE_STATE_STACK_XOFF only for the last + * skb of a batch. + * Returns true if the doorbell must be used to kick the NIC. + */ +static inline bool __netdev_tx_sent_queue(struct netdev_queue *dev_queue, + unsigned int bytes, + bool xmit_more) +{ + if (xmit_more) { +#ifdef CONFIG_BQL + dql_queued(&dev_queue->dql, bytes); +#endif + return netif_tx_queue_stopped(dev_queue); + } + netdev_tx_sent_queue(dev_queue, bytes); + return true; +} + /** * netdev_sent_queue - report the number of bytes queued to hardware * @dev: network device From fe60faa5063822f2d555f4f326c7dd72a60929bf Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 31 Oct 2018 08:39:13 -0700 Subject: [PATCH 066/726] net: do not abort bulk send on BQL status Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 77d43ae2a7bb..0ffcbdd55fa9 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3272,7 +3272,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de } skb = next; - if (netif_xmit_stopped(txq) && skb) { + if (netif_tx_queue_stopped(txq) && skb) { rc = NETDEV_TX_BUSY; break; } From c29734443511aa3c53844e1941805fc761aa80ba Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 31 Oct 2018 08:39:14 -0700 Subject: [PATCH 067/726] net/mlx4_en: use __netdev_tx_sent_queue() doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet Cc: Tariq Toukan Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 1857ee0f0871..6f5153afcab4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -1006,7 +1006,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->packets++; } ring->bytes += tx_info->nr_bytes; - netdev_tx_sent_queue(ring->tx_queue, tx_info->nr_bytes); AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len); if (tx_info->inl) @@ -1044,7 +1043,10 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) netif_tx_stop_queue(ring->tx_queue); ring->queue_stopped++; } - send_doorbell = !skb->xmit_more || netif_xmit_stopped(ring->tx_queue); + + send_doorbell = __netdev_tx_sent_queue(ring->tx_queue, + tx_info->nr_bytes, + skb->xmit_more); real_size = (real_size / 16) & 0x3f; From e8ccbb7d2f53c62e14b889faaa3f6f809b657278 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Fri, 2 Nov 2018 17:47:48 +0800 Subject: [PATCH 068/726] net: hns3: Fix for out-of-bounds access when setting pfc back pressure The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index aa5cb9834d73..494e562fe8c7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -1168,14 +1168,14 @@ static int hclge_pfc_setup_hw(struct hclge_dev *hdev) */ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) { - struct hclge_vport *vport = hdev->vport; - u32 i, k, qs_bitmap; - int ret; + int i; for (i = 0; i < HCLGE_BP_GRP_NUM; i++) { - qs_bitmap = 0; + u32 qs_bitmap = 0; + int k, ret; for (k = 0; k < hdev->num_alloc_vport; k++) { + struct hclge_vport *vport = &hdev->vport[k]; u16 qs_id = vport->qs_offset + tc; u8 grp, sub_grp; @@ -1185,8 +1185,6 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) HCLGE_BP_SUB_GRP_ID_S); if (i == grp) qs_bitmap |= (1 << sub_grp); - - vport++; } ret = hclge_tm_qs_bp_cfg(hdev, tc, i, qs_bitmap); From b987ffc18fb3b3b76b059aa9e372dbee26f7c4f2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 2 Nov 2018 14:26:53 +0100 Subject: [PATCH 069/726] x86/qspinlock: Fix compile error With a compiler that has asm-goto but not asm-cc-output and CONFIG_PROFILE_ALL_BRANCHES=y we get a compiler error: arch/x86/include/asm/rmwcc.h:23:17: error: jump into statement expression Fix this by writing the if() as a boolean multiplication instead. Reported-by: kbuild test robot Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Cc: linux-kernel@vger.kernel.org Fixes: 7aa54be29765 ("locking/qspinlock, x86: Provide liveness guarantee") Signed-off-by: Ingo Molnar --- arch/x86/include/asm/qspinlock.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/qspinlock.h b/arch/x86/include/asm/qspinlock.h index 87623c6b13db..bd5ac6cc37db 100644 --- a/arch/x86/include/asm/qspinlock.h +++ b/arch/x86/include/asm/qspinlock.h @@ -13,12 +13,15 @@ #define queued_fetch_set_pending_acquire queued_fetch_set_pending_acquire static __always_inline u32 queued_fetch_set_pending_acquire(struct qspinlock *lock) { - u32 val = 0; - - if (GEN_BINARY_RMWcc(LOCK_PREFIX "btsl", lock->val.counter, c, - "I", _Q_PENDING_OFFSET)) - val |= _Q_PENDING_VAL; + u32 val; + /* + * We can't use GEN_BINARY_RMWcc() inside an if() stmt because asm goto + * and CONFIG_PROFILE_ALL_BRANCHES=y results in a label inside a + * statement expression, which GCC doesn't like. + */ + val = GEN_BINARY_RMWcc(LOCK_PREFIX "btsl", lock->val.counter, c, + "I", _Q_PENDING_OFFSET) * _Q_PENDING_VAL; val |= atomic_read(&lock->val) & ~_Q_PENDING_MASK; return val; From 40fa3780bac2b654edf23f6b13f4e2dd550aea10 Mon Sep 17 00:00:00 2001 From: Valentin Schneider Date: Tue, 23 Oct 2018 14:37:31 +0100 Subject: [PATCH 070/726] sched/core: Take the hotplug lock in sched_init_smp() When running on linux-next (8c60c36d0b8c ("Add linux-next specific files for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g. Juno or HiKey960), we get the following report: [ 0.748225] Call trace: [ 0.750685] lockdep_assert_cpus_held+0x30/0x40 [ 0.755236] static_key_enable_cpuslocked+0x20/0xc8 [ 0.760137] build_sched_domains+0x1034/0x1108 [ 0.764601] sched_init_domains+0x68/0x90 [ 0.768628] sched_init_smp+0x30/0x80 [ 0.772309] kernel_init_freeable+0x278/0x51c [ 0.776685] kernel_init+0x10/0x108 [ 0.780190] ret_from_fork+0x10/0x18 The static_key in question is 'sched_asym_cpucapacity' introduced by commit: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations") In this particular case, we enable it because smp_prepare_cpus() will end up fetching the capacity-dmips-mhz entry from the devicetree, so we already have some asymmetry detected when entering sched_init_smp(). This didn't get detected in tip/sched/core because we were missing: commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") Calls to build_sched_domains() post sched_init_smp() will hold the hotplug lock, it just so happens that this very first call is a special case. As stated by a comment in sched_init_smp(), "There's no userspace yet to cause hotplug operations" so this is a harmless warning. However, to both respect the semantics of underlying callees and make lockdep happy, take the hotplug lock in sched_init_smp(). This also satisfies the comment atop sched_init_domains() that says "Callers must hold the hotplug lock". Reported-by: Sudeep Holla Tested-by: Sudeep Holla Signed-off-by: Valentin Schneider Signed-off-by: Peter Zijlstra (Intel) Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: morten.rasmussen@arm.com Cc: quentin.perret@arm.com Link: http://lkml.kernel.org/r/1540301851-3048-1-git-send-email-valentin.schneider@arm.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fd2fce8a001b..02a20ef196a6 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5859,11 +5859,14 @@ void __init sched_init_smp(void) /* * There's no userspace yet to cause hotplug operations; hence all the * CPU masks are stable and all blatant races in the below code cannot - * happen. + * happen. The hotplug lock is nevertheless taken to satisfy lockdep, + * but there won't be any contention on it. */ + cpus_read_lock(); mutex_lock(&sched_domains_mutex); sched_init_domains(cpu_active_mask); mutex_unlock(&sched_domains_mutex); + cpus_read_unlock(); /* Move init over to a non-isolated CPU */ if (set_cpus_allowed_ptr(current, housekeeping_cpumask(HK_FLAG_DOMAIN)) < 0) From 92619210529a6b77b2cbedbadba3ff5eaa6e28ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:36:24 +0100 Subject: [PATCH 071/726] qed: fix link config error handling gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index f40f654398a0..a96364df4320 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1944,9 +1944,12 @@ int qed_mcp_trans_speed_mask(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u32 *p_speed_mask) { u32 transceiver_type, transceiver_state; + int ret; - qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state, - &transceiver_type); + ret = qed_mcp_get_transceiver_data(p_hwfn, p_ptt, &transceiver_state, + &transceiver_type); + if (ret) + return ret; if (qed_is_transceiver_ready(transceiver_state, transceiver_type) == false) From a277d516de5f498c91d91189717ef7e01102ad27 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:36:55 +0100 Subject: [PATCH 072/726] openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/openvswitch/conntrack.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 6bec37ab4472..a4660c48ff01 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -1203,7 +1203,8 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key, &info->labels.mask); if (err) return err; - } else if (labels_nonzero(&info->labels.mask)) { + } else if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) && + labels_nonzero(&info->labels.mask)) { err = ovs_ct_set_labels(ct, key, &info->labels.value, &info->labels.mask); if (err) From 96801552f846460fe9ac10f1b189602992f004e1 Mon Sep 17 00:00:00 2001 From: Shalom Toledo Date: Fri, 2 Nov 2018 19:49:15 +0000 Subject: [PATCH 073/726] mlxsw: spectrum: Fix IP2ME CPU policer configuration The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index a2df12b79f8e..9bec940330a4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3568,7 +3568,6 @@ static int mlxsw_sp_cpu_policers_set(struct mlxsw_core *mlxsw_core) burst_size = 7; break; case MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME: - is_bytes = true; rate = 4 * 1024; burst_size = 4; break; From fd82d61ba142f0b83463e47064bf5460aac57b6e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sat, 3 Nov 2018 13:59:45 +0800 Subject: [PATCH 074/726] sctp: fix strchange_flags name for Stream Change Event As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji Signed-off-by: Xin Long Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 34dd3d497f2c..680ecc3bf2a9 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -568,6 +568,8 @@ struct sctp_assoc_reset_event { #define SCTP_ASSOC_CHANGE_DENIED 0x0004 #define SCTP_ASSOC_CHANGE_FAILED 0x0008 +#define SCTP_STREAM_CHANGE_DENIED SCTP_ASSOC_CHANGE_DENIED +#define SCTP_STREAM_CHANGE_FAILED SCTP_ASSOC_CHANGE_FAILED struct sctp_stream_change_event { __u16 strchange_type; __u16 strchange_flags; From 12480e3b16982c4026de10dd8155823219cd6391 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sat, 3 Nov 2018 14:01:31 +0800 Subject: [PATCH 075/726] sctp: define SCTP_SS_DEFAULT for Stream schedulers According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji Signed-off-by: Xin Long Signed-off-by: David S. Miller --- include/uapi/linux/sctp.h | 1 + net/sctp/outqueue.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index 680ecc3bf2a9..c81feb373d3e 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -1153,6 +1153,7 @@ struct sctp_add_streams { /* SCTP Stream schedulers */ enum sctp_sched_type { SCTP_SS_FCFS, + SCTP_SS_DEFAULT = SCTP_SS_FCFS, SCTP_SS_PRIO, SCTP_SS_RR, SCTP_SS_MAX = SCTP_SS_RR diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 9cb854b05342..c37e1c2dec9d 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -212,7 +212,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) INIT_LIST_HEAD(&q->retransmit); INIT_LIST_HEAD(&q->sacked); INIT_LIST_HEAD(&q->abandoned); - sctp_sched_set_sched(asoc, SCTP_SS_FCFS); + sctp_sched_set_sched(asoc, SCTP_SS_DEFAULT); } /* Free the outqueue structure and any related pending chunks. From 35b69a420bfb56b7b74cb635ea903db05e357bec Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 4 Nov 2018 03:48:54 +0000 Subject: [PATCH 076/726] clockevents/drivers/i8253: Add support for PIT shutdown quirk Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley Signed-off-by: Thomas Gleixner Cc: "gregkh@linuxfoundation.org" Cc: "devel@linuxdriverproject.org" Cc: "daniel.lezcano@linaro.org" Cc: "virtualization@lists.linux-foundation.org" Cc: "jgross@suse.com" Cc: "akataria@vmware.com" Cc: "olaf@aepfle.de" Cc: "apw@canonical.com" Cc: vkuznets Cc: "jasowang@redhat.com" Cc: "marcelo.cerri@canonical.com" Cc: KY Srinivasan Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.com --- drivers/clocksource/i8253.c | 14 ++++++++++++-- include/linux/i8253.h | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c index 9c38895542f4..d4350bb10b83 100644 --- a/drivers/clocksource/i8253.c +++ b/drivers/clocksource/i8253.c @@ -20,6 +20,13 @@ DEFINE_RAW_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); +/* + * Handle PIT quirk in pit_shutdown() where zeroing the counter register + * restarts the PIT, negating the shutdown. On platforms with the quirk, + * platform specific code can set this to false. + */ +bool i8253_clear_counter_on_shutdown __ro_after_init = true; + #ifdef CONFIG_CLKSRC_I8253 /* * Since the PIT overflows every tick, its not very useful @@ -109,8 +116,11 @@ static int pit_shutdown(struct clock_event_device *evt) raw_spin_lock(&i8253_lock); outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); + + if (i8253_clear_counter_on_shutdown) { + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + } raw_spin_unlock(&i8253_lock); return 0; diff --git a/include/linux/i8253.h b/include/linux/i8253.h index e6bb36a97519..8336b2f6f834 100644 --- a/include/linux/i8253.h +++ b/include/linux/i8253.h @@ -21,6 +21,7 @@ #define PIT_LATCH ((PIT_TICK_RATE + HZ/2) / HZ) extern raw_spinlock_t i8253_lock; +extern bool i8253_clear_counter_on_shutdown; extern struct clock_event_device i8253_clockevent; extern void clockevent_i8253_init(bool oneshot); From 1de72c706488b7be664a601cf3843bd01e327e58 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Sun, 4 Nov 2018 03:48:57 +0000 Subject: [PATCH 077/726] x86/hyper-v: Enable PIT shutdown quirk Hyper-V emulation of the PIT has a quirk such that the normal PIT shutdown path doesn't work, because clearing the counter register restarts the timer. Disable the counter clearing on PIT shutdown. Signed-off-by: Michael Kelley Signed-off-by: Thomas Gleixner Cc: "gregkh@linuxfoundation.org" Cc: "devel@linuxdriverproject.org" Cc: "daniel.lezcano@linaro.org" Cc: "virtualization@lists.linux-foundation.org" Cc: "jgross@suse.com" Cc: "akataria@vmware.com" Cc: "olaf@aepfle.de" Cc: "apw@canonical.com" Cc: vkuznets Cc: "jasowang@redhat.com" Cc: "marcelo.cerri@canonical.com" Cc: KY Srinivasan Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-3-git-send-email-mikelley@microsoft.com --- arch/x86/kernel/cpu/mshyperv.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index 1c72f3819eb1..e81a2db42df7 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -295,6 +296,16 @@ static void __init ms_hyperv_init_platform(void) if (efi_enabled(EFI_BOOT)) x86_platform.get_nmi_reason = hv_get_nmi_reason; + /* + * Hyper-V VMs have a PIT emulation quirk such that zeroing the + * counter register during PIT shutdown restarts the PIT. So it + * continues to interrupt @18.2 HZ. Setting i8253_clear_counter + * to false tells pit_shutdown() not to zero the counter so that + * the PIT really is shutdown. Generation 2 VMs don't have a PIT, + * and setting this value has no effect. + */ + i8253_clear_counter_on_shutdown = false; + #if IS_ENABLED(CONFIG_HYPERV) /* * Setup the hook to get control post apic initialization. From 74e3512731bd5c9673176425a76a7cc5efa8ddb6 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Wed, 24 Oct 2018 22:37:13 +0300 Subject: [PATCH 078/726] hwmon: (core) Fix double-free in __hwmon_device_register() Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [] (dump_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x9c/0xb0) [] (dump_stack) from [] (print_address_description+0x68/0x250) [] (print_address_description) from [] (kasan_report_invalid_free+0x68/0x88) [] (kasan_report_invalid_free) from [] (__kasan_slab_free+0x1f4/0x200) [] (__kasan_slab_free) from [] (kasan_slab_free+0x14/0x18) [] (kasan_slab_free) from [] (kfree+0x90/0x294) [] (kfree) from [] (__hwmon_device_register+0x5dc/0xa7c) [] (__hwmon_device_register) from [] (hwmon_device_register_with_info+0xa0/0xa8) [] (hwmon_device_register_with_info) from [] (devm_hwmon_device_register_with_info+0x74/0xb4) [] (devm_hwmon_device_register_with_info) from [] (lm90_probe+0x414/0x578) [] (lm90_probe) from [] (i2c_device_probe+0x35c/0x384) [] (i2c_device_probe) from [] (really_probe+0x290/0x3e4) [] (really_probe) from [] (driver_probe_device+0x80/0x1c4) [] (driver_probe_device) from [] (__device_attach_driver+0x104/0x11c) [] (__device_attach_driver) from [] (bus_for_each_drv+0xa4/0xc8) [] (bus_for_each_drv) from [] (__device_attach+0xf0/0x15c) [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [] (device_initial_probe) from [] (bus_probe_device+0xdc/0xec) [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xd4) [] (deferred_probe_work_func) from [] (process_one_work+0x3dc/0x96c) [] (process_one_work) from [] (worker_thread+0x4ec/0x8bc) [] (worker_thread) from [] (kthread+0x230/0x240) [] (kthread) from [] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 975c95169884..84f61cec6319 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -649,8 +649,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, if (info[i]->config[j] & HWMON_T_INPUT) { err = hwmon_thermal_add_sensor(dev, hwdev, j); - if (err) - goto free_device; + if (err) { + device_unregister(hdev); + goto ida_remove; + } } } } @@ -658,8 +660,6 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, return hdev; -free_device: - device_unregister(hdev); free_hwmon: kfree(hwdev); ida_remove: From e3e61f01d755188cb6c2dcf5a244b9c0937c258e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 28 Oct 2018 18:16:51 +0100 Subject: [PATCH 079/726] hwmon: (ibmpowernv) Remove bogus __init annotations If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven Signed-off-by: Guenter Roeck --- drivers/hwmon/ibmpowernv.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c index 0ccca87f5271..293dd1c6c7b3 100644 --- a/drivers/hwmon/ibmpowernv.c +++ b/drivers/hwmon/ibmpowernv.c @@ -181,7 +181,7 @@ static ssize_t show_label(struct device *dev, struct device_attribute *devattr, return sprintf(buf, "%s\n", sdata->label); } -static int __init get_logical_cpu(int hwcpu) +static int get_logical_cpu(int hwcpu) { int cpu; @@ -192,9 +192,8 @@ static int __init get_logical_cpu(int hwcpu) return -ENOENT; } -static void __init make_sensor_label(struct device_node *np, - struct sensor_data *sdata, - const char *label) +static void make_sensor_label(struct device_node *np, + struct sensor_data *sdata, const char *label) { u32 id; size_t n; From 0432e833191ad4d17b7fc2364941f91dad51db1a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Holger=20Hoffst=C3=A4tte?= Date: Sun, 4 Nov 2018 19:02:42 +0100 Subject: [PATCH 080/726] net: phy: realtek: fix RTL8201F sysfs name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 7fc8508b5231..271e8adc39f1 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = { .flags = PHY_HAS_INTERRUPT, }, { .phy_id = 0x001cc816, - .name = "RTL8201F 10/100Mbps Ethernet", + .name = "RTL8201F Fast Ethernet", .phy_id_mask = 0x001fffff, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, From ea53abfab960909d622ca37bcfb8e1c5378d21cc Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sun, 4 Nov 2018 14:59:46 -0500 Subject: [PATCH 081/726] bonding/802.3ad: fix link_failure_count tracking Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar CC: David S. Miller CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index ffa37adb7681..333387f1f1fe 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3112,13 +3112,13 @@ static int bond_slave_netdev_event(unsigned long event, case NETDEV_CHANGE: /* For 802.3ad mode only: * Getting invalid Speed/Duplex values here will put slave - * in weird state. So mark it as link-down for the time + * in weird state. So mark it as link-fail for the time * being and let link-monitoring (miimon) set it right when * correct speeds/duplex are available. */ if (bond_update_speed_duplex(slave) && BOND_MODE(bond) == BOND_MODE_8023AD) - slave->link = BOND_LINK_DOWN; + slave->link = BOND_LINK_FAIL; if (BOND_MODE(bond) == BOND_MODE_8023AD) bond_3ad_adapter_speed_duplex_changed(slave); From 438ad09af5581b7024850b5dbb6353c7f2f7d8a9 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Thu, 18 Oct 2018 13:26:13 +0200 Subject: [PATCH 082/726] ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the type of compatible string "fs,imx6sll-i2c" which should be "fsl,imx6sll-i2c". Signed-off-by: Oleksij Rempel Acked-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sll.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index ed9a980bce85..beefa1b2049d 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -740,7 +740,7 @@ i2c1: i2c@21a0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = ; clocks = <&clks IMX6SLL_CLK_I2C1>; From 1af6ab3bac8458fc2e92ad7bb97b62de4a1fddef Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 30 Oct 2018 20:02:30 -0500 Subject: [PATCH 083/726] ARM: dts: fsl: Fix improperly quoted stdout-path values A quoted label reference doesn't expand to the node path and is taken as a literal string. Dropping the quotes can fix this unless the baudrate string is appended in which case we have to use the alias. At least on VF610, the problem was masked by setting the console in bootargs. Use the alias syntax with baudrate parameter so we can drop setting the console in bootargs. Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: NXP Linux Team Cc: Mark Rutland Reviewed-by: Fabio Estevam Reviewed-by: Stefan Agner Signed-off-by: Rob Herring Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-ppd.dts | 2 +- arch/arm/boot/dts/vf610m4-colibri.dts | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index b560ff88459b..5ff9a179c83c 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -55,7 +55,7 @@ }; chosen { - stdout-path = "&uart1:115200n8"; + stdout-path = "serial0:115200n8"; }; memory@70000000 { diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index 41ec66a96990..ca6249558760 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -50,8 +50,8 @@ compatible = "fsl,vf610m4"; chosen { - bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw"; - stdout-path = "&uart2"; + bootargs = "clk_ignore_unused init=/linuxrc rw"; + stdout-path = "serial2:115200"; }; memory@8c000000 { From 1ad9fb750a104f51851c092edd7b3553f0218428 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Mon, 8 Oct 2018 15:28:01 +0000 Subject: [PATCH 084/726] ARM: dts: imx6sx-sdb: Fix enet phy regulator Bindings for "fixed-regulator" only explicitly support "gpio" property, not "gpios". Fix by correcting the property name. The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power cycle, this can be handled by the phy-reset-gpios property. Sadly this is not handled on suspend: the fec driver turns phy-supply off but doesn't assert phy-reset-gpios again on resume. Since additional phy-level work is required to support powering off the phy in suspend fix the problem by just marking the regulator as "boot-on" "always-on" so that it's never turned off. This behavior is equivalent to older releases. Keep the phy-reset-gpios property on fec anyway because it is a correct description of board design. This issue was exposed by commit efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") which causes the "gpios" property to also be parsed. Before that commit the "gpios" property had no effect, PHY reset was only handled in the the bootloader. This fixes linux-next boot failures previously reported here: https://lore.kernel.org/patchwork/patch/982437/#1177900 https://lore.kernel.org/patchwork/patch/994091/#1178304 Signed-off-by: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 53b3408b5fab..7d7d679945d2 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -117,7 +117,9 @@ regulator-name = "enet_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; }; reg_pcie_gpio: regulator-pcie-gpio { @@ -180,6 +182,7 @@ phy-supply = <®_enet_3v3>; phy-mode = "rgmii"; phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; mdio { @@ -373,6 +376,8 @@ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + /* phy reset */ + MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 >; }; From 3182215dd0b2120fb942ed88430cfb7c12d583e0 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Tue, 30 Oct 2018 22:02:03 +1100 Subject: [PATCH 085/726] powerpc/powernv/npu: Remove NPU DMA ops The NPU IOMMU is setup to mirror the parent PCIe device IOMMU setup. Therefore it does not make sense to call dma operations such as dma_map_page(), etc. directly on these devices. The existing dma_ops simply print a warning if they are ever called, however this is unnecessary and the warnings are likely to go unnoticed. It is instead simpler to remove these operations and let the generic DMA code print warnings (eg. via a NULL pointer deref) in cases of buggy drivers attempting dma operations on NVLink devices. Signed-off-by: Alistair Popple Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/npu-dma.c | 64 ++---------------------- 1 file changed, 4 insertions(+), 60 deletions(-) diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index 6f60e0931922..75b935252981 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -102,63 +102,6 @@ struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index) } EXPORT_SYMBOL(pnv_pci_get_npu_dev); -#define NPU_DMA_OP_UNSUPPORTED() \ - dev_err_once(dev, "%s operation unsupported for NVLink devices\n", \ - __func__) - -static void *dma_npu_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag, - unsigned long attrs) -{ - NPU_DMA_OP_UNSUPPORTED(); - return NULL; -} - -static void dma_npu_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) -{ - NPU_DMA_OP_UNSUPPORTED(); -} - -static dma_addr_t dma_npu_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - unsigned long attrs) -{ - NPU_DMA_OP_UNSUPPORTED(); - return 0; -} - -static int dma_npu_map_sg(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction, - unsigned long attrs) -{ - NPU_DMA_OP_UNSUPPORTED(); - return 0; -} - -static int dma_npu_dma_supported(struct device *dev, u64 mask) -{ - NPU_DMA_OP_UNSUPPORTED(); - return 0; -} - -static u64 dma_npu_get_required_mask(struct device *dev) -{ - NPU_DMA_OP_UNSUPPORTED(); - return 0; -} - -static const struct dma_map_ops dma_npu_ops = { - .map_page = dma_npu_map_page, - .map_sg = dma_npu_map_sg, - .alloc = dma_npu_alloc, - .free = dma_npu_free, - .dma_supported = dma_npu_dma_supported, - .get_required_mask = dma_npu_get_required_mask, -}; - /* * Returns the PE assoicated with the PCI device of the given * NPU. Returns the linked pci device if pci_dev != NULL. @@ -270,10 +213,11 @@ static void pnv_npu_dma_set_32(struct pnv_ioda_pe *npe) rc = pnv_npu_set_window(npe, 0, gpe->table_group.tables[0]); /* - * We don't initialise npu_pe->tce32_table as we always use - * dma_npu_ops which are nops. + * NVLink devices use the same TCE table configuration as + * their parent device so drivers shouldn't be doing DMA + * operations directly on these devices. */ - set_dma_ops(&npe->pdev->dev, &dma_npu_ops); + set_dma_ops(&npe->pdev->dev, NULL); } /* From e1ff516a56ad56c476b47795d3811eef79d25fbe Mon Sep 17 00:00:00 2001 From: Yi Wang Date: Mon, 5 Nov 2018 08:50:13 +0800 Subject: [PATCH 086/726] sched/fair: Fix a comment in task_numa_fault() Duplicated 'case it'. Signed-off-by: Yi Wang Reviewed-by: Xi Xu Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1541379013-11352-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index ee271bb661cc..3648d0300fdf 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2400,8 +2400,8 @@ void task_numa_fault(int last_cpupid, int mem_node, int pages, int flags) local = 1; /* - * Retry task to preferred node migration periodically, in case it - * case it previously failed, or the scheduler moved us. + * Retry to migrate task to preferred node periodically, in case it + * previously failed, or the scheduler moved us. */ if (time_after(jiffies, p->numa_migrate_retry)) { task_numa_placement(p); From f75d651587f719a813ebbbfeee570e6570731d55 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 4 Nov 2018 18:40:14 -0800 Subject: [PATCH 087/726] resource/docs: Fix new kernel-doc warnings The first group of warnings is caused by a "/**" kernel-doc notation marker but the function comments are not in kernel-doc format. Also add another error return value here. ../kernel/resource.c:337: warning: Function parameter or member 'start' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'end' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'flags' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'desc' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'first_lvl' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'res' not described in 'find_next_iomem_res' Add the missing function parameter documentation for the other warnings: ../kernel/resource.c:409: warning: Function parameter or member 'arg' not described in 'walk_iomem_res_desc' ../kernel/resource.c:409: warning: Function parameter or member 'func' not described in 'walk_iomem_res_desc' Signed-off-by: Randy Dunlap Cc: Andrew Morton Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: b69c2e20f6e4 ("resource: Clean it up a bit") Link: http://lkml.kernel.org/r/dda2e4d8-bedd-3167-20fe-8c7d2d35b354@infradead.org Signed-off-by: Ingo Molnar --- kernel/resource.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index b3a3a1fc499e..17bcb189d530 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -318,14 +318,14 @@ int release_resource(struct resource *old) EXPORT_SYMBOL(release_resource); -/** +/* * Finds the lowest iomem resource that covers part of [start..end]. The * caller must specify start, end, flags, and desc (which may be * IORES_DESC_NONE). * * If a resource is found, returns 0 and *res is overwritten with the part * of the resource that's within [start..end]; if none is found, returns - * -1. + * -1. Returns -EINVAL for other invalid parameters. * * This function walks the whole tree and not just first level children * unless @first_lvl is true. @@ -390,7 +390,9 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, } /** - * Walks through iomem resources and calls func() with matching resource + * walk_iomem_res_desc - walk through iomem resources + * + * Walks through iomem resources and calls @func() with matching resource * ranges. This walks through whole tree and not just first level children. * All the memory ranges which overlap start,end and also match flags and * desc are valid candidates. @@ -399,6 +401,8 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, * @flags: I/O resource flags * @start: start addr * @end: end addr + * @arg: function argument for the callback @func + * @func: callback function that is called for each qualifying resource area * * NOTE: For a new descriptor search, define a new IORES_DESC in * and set it in 'desc' of a target resource entry. From b068621a53f92f42400581d69ad0e84c56620b0a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 4 Nov 2018 14:03:56 -0800 Subject: [PATCH 088/726] Documentation/x86: Fix typo in zero-page.txt Signed-off-by: Randy Dunlap Cc: Jonathan Corbet Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/f259b21b-1f2b-f215-00d2-23388bed2530@infradead.org Signed-off-by: Ingo Molnar --- Documentation/x86/zero-page.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index 97b7adbceda4..68aed077f7b6 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -25,7 +25,7 @@ Offset Proto Name Meaning 0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 140/080 ALL edid_info Video mode setup (struct edid_info) 1C0/020 ALL efi_info EFI 32 information (struct efi_info) -1E0/004 ALL alk_mem_k Alternative mem check, in KB +1E0/004 ALL alt_mem_k Alternative mem check, in KB 1E4/004 ALL scratch Scratch field for the kernel setup code 1E8/001 ALL e820_entries Number of entries in e820_table (below) 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) From 8727b230f665cadb9349a915c60e6abb18fb083c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 13 Oct 2018 13:21:40 +0300 Subject: [PATCH 089/726] drm/exynos: checking for NULL instead of IS_ERR() The of_drm_find_panel() function returns error pointers and never NULL but we the driver assumes that ->panel is NULL when it's not present. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Signed-off-by: Dan Carpenter Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 07af7758066d..32f256749789 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1527,7 +1527,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, } dsi->panel = of_drm_find_panel(device->dev.of_node); - if (dsi->panel) { + if (IS_ERR(dsi->panel)) { + dsi->panel = NULL; + } else { drm_panel_attach(dsi->panel, &dsi->connector); dsi->connector.status = connector_status_connected; } From 6ca469e22a30992b4478d2ab88737c70667c1e00 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 5 Oct 2018 11:50:20 +0900 Subject: [PATCH 090/726] Revert "drm/exynos/decon5433: implement frame counter" This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 9 --------- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 11 ----------- drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 - 3 files changed, 21 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 94529aa82339..aef487dd8731 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -164,13 +164,6 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end) return frm; } -static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc) -{ - struct decon_context *ctx = crtc->ctx; - - return decon_get_frame_count(ctx, false); -} - static void decon_setup_trigger(struct decon_context *ctx) { if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG)) @@ -536,7 +529,6 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = { .disable = decon_disable, .enable_vblank = decon_enable_vblank, .disable_vblank = decon_disable_vblank, - .get_vblank_counter = decon_get_vblank_counter, .atomic_begin = decon_atomic_begin, .update_plane = decon_update_plane, .disable_plane = decon_disable_plane, @@ -554,7 +546,6 @@ static int decon_bind(struct device *dev, struct device *master, void *data) int ret; ctx->drm_dev = drm_dev; - drm_dev->max_vblank_count = 0xffffffff; for (win = ctx->first_win; win < WINDOWS_NR; win++) { ctx->configs[win].pixel_formats = decon_formats; diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index eea90251808f..2696289ecc78 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -162,16 +162,6 @@ static void exynos_drm_crtc_disable_vblank(struct drm_crtc *crtc) exynos_crtc->ops->disable_vblank(exynos_crtc); } -static u32 exynos_drm_crtc_get_vblank_counter(struct drm_crtc *crtc) -{ - struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc); - - if (exynos_crtc->ops->get_vblank_counter) - return exynos_crtc->ops->get_vblank_counter(exynos_crtc); - - return 0; -} - static const struct drm_crtc_funcs exynos_crtc_funcs = { .set_config = drm_atomic_helper_set_config, .page_flip = drm_atomic_helper_page_flip, @@ -181,7 +171,6 @@ static const struct drm_crtc_funcs exynos_crtc_funcs = { .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, .enable_vblank = exynos_drm_crtc_enable_vblank, .disable_vblank = exynos_drm_crtc_disable_vblank, - .get_vblank_counter = exynos_drm_crtc_get_vblank_counter, }; struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev, diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index ec9604f1272b..5e61e707f955 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -135,7 +135,6 @@ struct exynos_drm_crtc_ops { void (*disable)(struct exynos_drm_crtc *crtc); int (*enable_vblank)(struct exynos_drm_crtc *crtc); void (*disable_vblank)(struct exynos_drm_crtc *crtc); - u32 (*get_vblank_counter)(struct exynos_drm_crtc *crtc); enum drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc, const struct drm_display_mode *mode); bool (*mode_fixup)(struct exynos_drm_crtc *crtc, From deee3284cba3145a4ee03cbe8541d7a3bfc499e2 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 26 Oct 2018 12:40:03 +0200 Subject: [PATCH 091/726] drm/exynos/dsi: register connector if it is created after drm bind DSI device can be attached after DRM device is registered. In such case newly created connector must be registered by exynos_dsi. The patch fixes exynos_drm on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 32f256749789..d81e62ae286a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -1474,12 +1475,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder) { struct exynos_dsi *dsi = encoder_to_dsi(encoder); struct drm_connector *connector = &dsi->connector; + struct drm_device *drm = encoder->dev; int ret; connector->polled = DRM_CONNECTOR_POLL_HPD; - ret = drm_connector_init(encoder->dev, connector, - &exynos_dsi_connector_funcs, + ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs, DRM_MODE_CONNECTOR_DSI); if (ret) { DRM_ERROR("Failed to initialize connector with drm\n"); @@ -1489,7 +1490,12 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder) connector->status = connector_status_disconnected; drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs); drm_connector_attach_encoder(connector, encoder); + if (!drm->registered) + return 0; + connector->funcs->reset(connector); + drm_fb_helper_add_one_connector(drm->fb_helper, connector); + drm_connector_register(connector); return 0; } From 989534cfcac89f927fa46b1e0861d92ffbd2c7e4 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 26 Oct 2018 12:13:28 +0200 Subject: [PATCH 092/726] drm/exynos/fbdev: do not skip fbdev init if there are no connectors Since connectors can be created dynamically, fbdev should be initialized even if there are no connectors at the moment. Otherwise fbdev will not be created even after connector's appearance. The patch fixes lack of fbdev on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski Signed-off-by: Andrzej Hajda Tested-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 918dd2c82209..01d182289efa 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -192,7 +192,7 @@ int exynos_drm_fbdev_init(struct drm_device *dev) struct drm_fb_helper *helper; int ret; - if (!dev->mode_config.num_crtc || !dev->mode_config.num_connector) + if (!dev->mode_config.num_crtc) return 0; fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); From defeea5ee23d9cdd296801a0a9ea885c037ff9c9 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 24 Oct 2018 17:38:43 +0200 Subject: [PATCH 093/726] MAINTAINERS: add myself as co-maintainer of gpiolib MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As discussed with Linus Walleij - I'm adding myself as the co-maintainer. Cc: Benoît Cousson Cc: Kevin Hilman Cc: Michael Turquette Signed-off-by: Bartosz Golaszewski Acked-by: Michael Turquette Signed-off-by: Linus Walleij --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f4855974f325..e1bacf0f8b08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6299,6 +6299,7 @@ F: tools/testing/selftests/gpio/ GPIO SUBSYSTEM M: Linus Walleij +M: Bartosz Golaszewski L: linux-gpio@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git S: Maintained From be2e1c9dcf76886a83fb1c433a316e26d4ca2550 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 Oct 2018 13:06:16 +0200 Subject: [PATCH 094/726] mtd: docg3: don't set conflicting BCH_CONST_PARAMS option I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik Signed-off-by: Arnd Bergmann Signed-off-by: Boris Brezillon --- drivers/mtd/devices/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index e514d57a0419..aa983422aa97 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers" config MTD_DOCG3 tristate "M-Systems Disk-On-Chip G3" select BCH - select BCH_CONST_PARAMS + select BCH_CONST_PARAMS if !MTD_NAND_BCH select BITREVERSE help This provides an MTD device driver for the M-Systems DiskOnChip From ce97e2bb6687d3af675ecf2e836a9122def53578 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 4 Nov 2018 18:38:35 -0800 Subject: [PATCH 095/726] mtd: nand: drop kernel-doc notation for a deleted function parameter Remove kernel-doc notation for a deleted function parameter to prevent a kernel-doc warning: ../drivers/mtd/nand/raw/nand_base.c:603: warning: Excess function parameter 'mtd' description in 'panic_nand_wait' Fixes: f1d46942e823 ("mtd: rawnand: Pass a nand_chip object to chip->waitfunc()") Signed-off-by: Randy Dunlap Cc: Boris Brezillon Cc: Miquel Raynal Cc: Richard Weinberger Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/nand_base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 05bd0779fe9b..71050a0b31df 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -590,7 +590,6 @@ retry: /** * panic_nand_wait - [GENERIC] wait until the command is done - * @mtd: MTD device structure * @chip: NAND chip structure * @timeo: timeout * From d098093ba06eb032057d1aca1c2e45889e099d00 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Sun, 28 Oct 2018 12:29:55 +0100 Subject: [PATCH 096/726] mtd: nand: Fix nanddev_neraseblocks() nanddev_neraseblocks() currently returns the number pages per LUN instead of the total number of eraseblocks. Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal --- include/linux/mtd/nand.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index abe975c87b90..78b86dea2f29 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -324,9 +324,8 @@ static inline unsigned int nanddev_ntargets(const struct nand_device *nand) */ static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand) { - return (u64)nand->memorg.luns_per_target * - nand->memorg.eraseblocks_per_lun * - nand->memorg.pages_per_eraseblock; + return nand->memorg.ntargets * nand->memorg.luns_per_target * + nand->memorg.eraseblocks_per_lun; } /** From e39f9dd8206ad66992ac0e6218ef1ba746f2cce9 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 23 Oct 2018 18:03:19 +0200 Subject: [PATCH 097/726] pinctrl: meson: fix pinconf bias disable If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set() with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will force a pull-down bias on the pin. Instead of the pull type register bank, the driver should access the pull enable register bank. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index f8b778a7d471..53d449076dee 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -192,7 +192,7 @@ static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin, dev_dbg(pc->dev, "pin %u: disable bias\n", pin); meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit); - ret = regmap_update_bits(pc->reg_pull, reg, + ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit), 0); if (ret) return ret; From 4bc51e1e350cd4707ce6e551a93eae26d40b9889 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 29 Oct 2018 16:13:37 +0100 Subject: [PATCH 098/726] pinctrl: meson: fix gxbb ao pull register bits AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index 4ceb06f8a33c..4edeb4cae72a 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -830,7 +830,7 @@ static struct meson_bank meson_gxbb_periphs_banks[] = { static struct meson_bank meson_gxbb_aobus_banks[] = { /* name first last irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), + BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), }; static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { From ed3a2b74f3eb34c84c8377353f4730f05acdfd05 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 29 Oct 2018 16:13:38 +0100 Subject: [PATCH 099/726] pinctrl: meson: fix gxl ao pull register bits AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index 7dae1d7bf6b0..158f618f1695 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -807,7 +807,7 @@ static struct meson_bank meson_gxl_periphs_banks[] = { static struct meson_bank meson_gxl_aobus_banks[] = { /* name first last irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), + BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), }; static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { From e91b162d2868672d06010f34aa83d408db13d3c6 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 29 Oct 2018 16:13:39 +0100 Subject: [PATCH 100/726] pinctrl: meson: fix meson8 ao pull register bits AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c index c6d79315218f..86466173114d 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8.c +++ b/drivers/pinctrl/meson/pinctrl-meson8.c @@ -1053,7 +1053,7 @@ static struct meson_bank meson8_cbus_banks[] = { static struct meson_bank meson8_aobus_banks[] = { /* name first last irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), + BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), }; static struct meson_pinctrl_data meson8_cbus_pinctrl_data = { From a1705f02704cd8a24d434bfd0141ee8142ad277a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 29 Oct 2018 16:13:40 +0100 Subject: [PATCH 101/726] pinctrl: meson: fix meson8b ao pull register bits AO pull register definition is inverted between pull (up/down) and pull enable. Fixing this allows to properly apply bias setting through pinconf Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Jerome Brunet Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index bb2a30964fc6..647ad15d5c3c 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -906,7 +906,7 @@ static struct meson_bank meson8b_cbus_banks[] = { static struct meson_bank meson8b_aobus_banks[] = { /* name first lastc irq pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0), + BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), }; static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = { From 4920b1f7676d55dcebdf55f2b0431a328acb4abe Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Fri, 2 Nov 2018 16:57:52 +0000 Subject: [PATCH 102/726] mailmap: Update email for Punit Agrawal As I'll no longer be working with Arm, add a mailmap entry so any mail directed towards me reaches the appropriate mailbox. Acked-by: Will Deacon Signed-off-by: Punit Agrawal Signed-off-by: Catalin Marinas --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index a76be45fef6c..28fecafa6506 100644 --- a/.mailmap +++ b/.mailmap @@ -159,6 +159,7 @@ Peter Oruba Peter Oruba Pratyush Anand Praveen BP +Punit Agrawal Qais Yousef Oleksij Rempel Oleksij Rempel From fc09ab7a767394f9ecdad84ea6e85d68b83c8e21 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Nov 2018 11:52:50 +0100 Subject: [PATCH 103/726] vga_switcheroo: Fix missing gpu_bound call at audio client registration The commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615 Fixes: 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: Reviewed-by: Lukas Wunner Signed-off-by: Takashi Iwai --- drivers/gpu/vga/vga_switcheroo.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index cf2a18571d48..a132c37d7334 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -380,6 +380,9 @@ int vga_switcheroo_register_audio_client(struct pci_dev *pdev, mutex_unlock(&vgasr_mutex); return -EINVAL; } + /* notify if GPU has been already bound */ + if (ops->gpu_bound) + ops->gpu_bound(pdev, id); } mutex_unlock(&vgasr_mutex); From aab7a2414ba0d5c3d0571a90031b535adba7146a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 28 Sep 2018 02:38:36 +0000 Subject: [PATCH 104/726] arm64: dts: renesas: r8a7795: add missing dma-names on hscif2 hscif2 has 4 dmas, but has only 2 dma-names. This patch add missing dma-names. Signed-off-by: Kuninori Morimoto Reviewed-by: Geert Uytterhoeven Fixes: e0f0bda79337701a ("arm64: dts: renesas: r8a7795: sort subnodes of the soc node") Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index b5f2273caca4..a79c8d369e0b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -652,7 +652,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>, <&dmac2 0x35>, <&dmac2 0x34>; - dma-names = "tx", "rx"; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; From 058ad7b6aa5204d3af878415c7b946748ab34f7a Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Thu, 4 Oct 2018 09:53:10 +0100 Subject: [PATCH 105/726] dt-bindings: arm: Fix RZ/G2E part number Fix RZ/G2E part number from its description. Signed-off-by: Fabrizio Castro Reviewed-by: Biju Das Reviewed-by: Rob Herring Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/arm/shmobile.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index f5e0f82fd503..58c4256d37a3 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -27,7 +27,7 @@ SoCs: compatible = "renesas,r8a77470" - RZ/G2M (R8A774A1) compatible = "renesas,r8a774a1" - - RZ/G2E (RA8774C0) + - RZ/G2E (R8A774C0) compatible = "renesas,r8a774c0" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" From eab53fdfd60a84b0cc514d4f1f5d79226c76df01 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 18 Oct 2018 19:48:53 +0300 Subject: [PATCH 106/726] arm64: dts: renesas: condor: switch from EtherAVB to GEther The "official" Condor boards have always been wired to mount NFS via GEther, not EtherAVB -- the boards resoldered for EtherAVB were local to Cogent Embedded, so we've been having an unpleasant situation where a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY extension board is plugged in). Switch from EtherAVB to GEther at last! Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support") Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- .../boot/dts/renesas/r8a77980-condor.dts | 47 ++++++++++--------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index fe2e2c051cc9..5a7012be0d6a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -15,7 +15,7 @@ aliases { serial0 = &scif0; - ethernet0 = &avb; + ethernet0 = &gether; }; chosen { @@ -97,23 +97,6 @@ }; }; -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii-id"; - phy-handle = <&phy0>; - renesas,no-ether-link; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - }; -}; - &canfd { pinctrl-0 = <&canfd0_pins>; pinctrl-names = "default"; @@ -139,6 +122,23 @@ clock-frequency = <32768>; }; +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -236,16 +236,17 @@ }; &pfc { - avb_pins: avb { - groups = "avb_mdio", "avb_rgmii"; - function = "avb"; - }; - canfd0_pins: canfd0 { groups = "canfd0_data_a"; function = "canfd0"; }; + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + i2c0_pins: i2c0 { groups = "i2c0"; function = "i2c0"; From 02522ad77fb7619615720147dc5da18024cad577 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 2 Nov 2018 13:09:08 +0100 Subject: [PATCH 107/726] s390: update defconfigs Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/configs/debug_defconfig | 14 ++++- arch/s390/configs/performance_defconfig | 13 +++- arch/s390/defconfig | 79 +++++++++++++------------ 3 files changed, 63 insertions(+), 43 deletions(-) diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 259d1698ac50..c69cb04b7a59 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -64,6 +64,8 @@ CONFIG_NUMA=y CONFIG_PREEMPT=y CONFIG_HZ_100=y CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -84,9 +86,11 @@ CONFIG_PCI_DEBUG=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y CONFIG_CHSC_SCH=y +CONFIG_VFIO_AP=m CONFIG_CRASH_DUMP=y CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -161,8 +165,6 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NF_CT_NETLINK_TIMEOUT=m CONFIG_NF_TABLES=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m CONFIG_NFT_CT=m CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m @@ -365,6 +367,8 @@ CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_DNS_RESOLVER=y CONFIG_OPENVSWITCH=m +CONFIG_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y @@ -461,6 +465,7 @@ CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m +CONFIG_ISM=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -486,9 +491,12 @@ CONFIG_MLX4_INFINIBAND=m CONFIG_MLX5_INFINIBAND=m CONFIG_VFIO=m CONFIG_VFIO_PCI=m +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -615,7 +623,6 @@ CONFIG_DEBUG_CREDENTIALS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=300 CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y @@ -727,3 +734,4 @@ CONFIG_APPLDATA_BASE=y CONFIG_KVM=m CONFIG_KVM_S390_UCONTROL=y CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 37fd60c20e22..32f539dc9c19 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -65,6 +65,8 @@ CONFIG_NR_CPUS=512 CONFIG_NUMA=y CONFIG_HZ_100=y CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -82,9 +84,11 @@ CONFIG_PCI=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_S390=y CONFIG_CHSC_SCH=y +CONFIG_VFIO_AP=m CONFIG_CRASH_DUMP=y CONFIG_BINFMT_MISC=m CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -159,8 +163,6 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NF_CT_NETLINK_TIMEOUT=m CONFIG_NF_TABLES=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m CONFIG_NFT_CT=m CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m @@ -362,6 +364,8 @@ CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_DNS_RESOLVER=y CONFIG_OPENVSWITCH=m +CONFIG_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y @@ -458,6 +462,7 @@ CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m +CONFIG_ISM=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set @@ -483,9 +488,12 @@ CONFIG_MLX4_INFINIBAND=m CONFIG_MLX5_INFINIBAND=m CONFIG_VFIO=m CONFIG_VFIO_PCI=m +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -666,3 +674,4 @@ CONFIG_APPLDATA_BASE=y CONFIG_KVM=m CONFIG_KVM_S390_UCONTROL=y CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 7cb6a52f727d..4d58a92b5d97 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -26,14 +26,23 @@ CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set -CONFIG_CHECKPOINT_RESTORE=y CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_LIVEPATCH=y +CONFIG_NR_CPUS=256 +CONFIG_NUMA=y +CONFIG_HZ_100=y +CONFIG_KEXEC_FILE=y +CONFIG_CRASH_DUMP=y +CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y +CONFIG_CMM=m CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y @@ -44,11 +53,7 @@ CONFIG_BLK_DEV_INTEGRITY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y -CONFIG_LIVEPATCH=y -CONFIG_NR_CPUS=256 -CONFIG_NUMA=y -CONFIG_HZ_100=y -CONFIG_KEXEC_FILE=y +CONFIG_BINFMT_MISC=m CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -60,9 +65,6 @@ CONFIG_ZBUD=m CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_CRASH_DUMP=y -CONFIG_BINFMT_MISC=m -CONFIG_HIBERNATION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -98,6 +100,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_VIRTIO_BLK=y CONFIG_SCSI=y +# CONFIG_SCSI_MQ_DEFAULT is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -131,6 +134,7 @@ CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_VIRTIO_NET=y # CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_CORTINA is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_NET_VENDOR_SOCIONEXT is not set @@ -157,33 +161,6 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_DWARF4=y -CONFIG_GDB_SCRIPTS=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_PAGEALLOC=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_PANIC_ON_OOPS=y -CONFIG_PROVE_LOCKING=y -CONFIG_LOCK_STAT=y -CONFIG_DEBUG_LOCKDEP=y -CONFIG_DEBUG_ATOMIC_SLEEP=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_SG=y -CONFIG_DEBUG_NOTIFIERS=y -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_LATENCYTOP=y -CONFIG_SCHED_TRACER=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_FUNCTION_PROFILER=y -# CONFIG_RUNTIME_TESTING_MENU is not set -CONFIG_S390_PTDUMP=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -193,6 +170,7 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CFB=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_CMAC=m @@ -231,7 +209,6 @@ CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_ZCRYPT=m -CONFIG_ZCRYPT_MULTIDEVNODES=y CONFIG_PKEY=m CONFIG_CRYPTO_PAES_S390=m CONFIG_CRYPTO_SHA1_S390=m @@ -247,4 +224,30 @@ CONFIG_CRC7=m # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set -CONFIG_CMM=m +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_PAGEALLOC=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCK_STAT=y +CONFIG_DEBUG_LOCKDEP=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y +CONFIG_DEBUG_NOTIFIERS=y +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_FUNCTION_PROFILER=y +# CONFIG_RUNTIME_TESTING_MENU is not set +CONFIG_S390_PTDUMP=y From f55275bcc72948056387041abe9fce1c54300adc Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 5 Nov 2018 06:34:09 -0800 Subject: [PATCH 108/726] ARM: defconfig: Disable PREEMPT again on multi_v7 I should have let this soak for a while in linux-next, since we have at least one board that hit a regression from it. Revert from 4.20-rc, and we'll queue it for next merge window once regression is fixed. This reverts commit 513eb98595522bc0cb83831a9daee1d5738e66f1. Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 1c7616815a86..63af6234c1b6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -1,7 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y From ee474b81fe5aa5dc0faae920bf66240fbf55f891 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 1 Nov 2018 23:29:28 +0900 Subject: [PATCH 109/726] tracing/kprobes: Fix strpbrk() argument order Fix strpbrk()'s argument order, it must pass acceptable string in 2nd argument. Note that this can cause a kernel panic where it recovers backup character to code->data. Link: http://lkml.kernel.org/r/154108256792.2604.1816052586385217811.stgit@devbox Fixes: a6682814f371 ("tracing/kprobes: Allow kprobe-events to record module symbol") Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index 3ef15a6683c0..bd30e9398d2a 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -535,7 +535,7 @@ int traceprobe_update_arg(struct probe_arg *arg) if (code[1].op != FETCH_OP_IMM) return -EINVAL; - tmp = strpbrk("+-", code->data); + tmp = strpbrk(code->data, "+-"); if (tmp) c = *tmp; ret = traceprobe_split_symbol_offset(code->data, From 79ef68c7e1f665578e005b454480b6eca60edabe Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 5 Nov 2018 12:23:40 -0300 Subject: [PATCH 110/726] perf augmented_syscalls: Start collecting pathnames in the BPF program This is the start of having the raw_syscalls:sys_enter BPF handler collecting pointer arguments, namely pathnames, and with two syscalls that have that pointer in different arguments, "open" as it as its first argument, "openat" as the second. With this in place the existing beautifiers in 'perf trace' works, those args are shown instead of just the pointer that comes with the syscalls tracepoints. This also serves to show and document pitfalls in the process of using just that place in the kernel (raw_syscalls:sys_enter) plus tables provided by userspace to collect syscall pointer arguments. One is the need to use a barrier, as suggested by Edward, to avoid clang optimizations that make the kernel BPF verifier to refuse loading our pointer contents collector. The end result should be a generic eBPF program that works in all architectures, with the differences amongst archs resolved by the userspace component, 'perf trace', that should get all its tables created automatically from the kernel components where they are defined, via string table constructors for things not expressed in BTF/DWARF (enums, structs, etc), and otherwise using those observability files (BTF). Cc: Adrian Hunter Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: David Ahern Cc: Edward Cree Cc: Jiri Olsa Cc: Martin KaFai Lau Cc: Namhyung Kim Cc: Wang Nan Cc: Yonghong Song Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- .../examples/bpf/augmented_raw_syscalls.c | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c index cde91c34b101..90a19336310b 100644 --- a/tools/perf/examples/bpf/augmented_raw_syscalls.c +++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c @@ -37,15 +37,87 @@ struct syscall_exit_args { long ret; }; +struct augmented_filename { + unsigned int size; + int reserved; + char value[256]; +}; + +#define SYS_OPEN 2 +#define SYS_OPENAT 257 + SEC("raw_syscalls:sys_enter") int sys_enter(struct syscall_enter_args *args) { struct { struct syscall_enter_args args; + struct augmented_filename filename; } augmented_args; unsigned int len = sizeof(augmented_args); + const void *filename_arg = NULL; probe_read(&augmented_args.args, sizeof(augmented_args.args), args); + /* + * Yonghong and Edward Cree sayz: + * + * https://www.spinics.net/lists/netdev/msg531645.html + * + * >> R0=inv(id=0) R1=inv2 R6=ctx(id=0,off=0,imm=0) R7=inv64 R10=fp0,call_-1 + * >> 10: (bf) r1 = r6 + * >> 11: (07) r1 += 16 + * >> 12: (05) goto pc+2 + * >> 15: (79) r3 = *(u64 *)(r1 +0) + * >> dereference of modified ctx ptr R1 off=16 disallowed + * > Aha, we at least got a different error message this time. + * > And indeed llvm has done that optimisation, rather than the more obvious + * > 11: r3 = *(u64 *)(r1 +16) + * > because it wants to have lots of reads share a single insn. You may be able + * > to defeat that optimisation by adding compiler barriers, idk. Maybe someone + * > with llvm knowledge can figure out how to stop it (ideally, llvm would know + * > when it's generating for bpf backend and not do that). -O0? ¯\_(ツ)_/¯ + * + * The optimization mostly likes below: + * + * br1: + * ... + * r1 += 16 + * goto merge + * br2: + * ... + * r1 += 20 + * goto merge + * merge: + * *(u64 *)(r1 + 0) + * + * The compiler tries to merge common loads. There is no easy way to + * stop this compiler optimization without turning off a lot of other + * optimizations. The easiest way is to add barriers: + * + * __asm__ __volatile__("": : :"memory") + * + * after the ctx memory access to prevent their down stream merging. + */ + switch (augmented_args.args.syscall_nr) { + case SYS_OPEN: filename_arg = (const void *)args->args[0]; + __asm__ __volatile__("": : :"memory"); + break; + case SYS_OPENAT: filename_arg = (const void *)args->args[1]; + break; + } + + if (filename_arg != NULL) { + augmented_args.filename.reserved = 0; + augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, + sizeof(augmented_args.filename.value), + filename_arg); + if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) { + len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size; + len &= sizeof(augmented_args.filename.value) - 1; + } + } else { + len = sizeof(augmented_args.args); + } + perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len); return 0; } From b42967dcac1d4f5b059ec25568136462bcb051fe Mon Sep 17 00:00:00 2001 From: Yi Wang Date: Mon, 29 Oct 2018 15:17:31 +0800 Subject: [PATCH 111/726] x86/hyper-v: Fix indentation in hv_do_fast_hypercall16() Remove the surplus TAB in hv_do_fast_hypercall16(). Signed-off-by: Yi Wang Signed-off-by: Thomas Gleixner Cc: kys@microsoft.com Cc: haiyangz@microsoft.com Cc: sthemmin@microsoft.com Cc: bp@alien8.de Cc: hpa@zytor.com Cc: devel@linuxdriverproject.org Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/r/1540797451-2792-1-git-send-email-wang.yi59@zte.com.cn --- arch/x86/include/asm/mshyperv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 0d6271cce198..1d0a7778e163 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -232,7 +232,7 @@ static inline u64 hv_do_fast_hypercall16(u16 code, u64 input1, u64 input2) : "cc"); } #endif - return hv_status; + return hv_status; } /* From 437e88ab8f9e2ad90576ab74c4cf8f527bbf51cd Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 23 Oct 2018 16:11:25 -0700 Subject: [PATCH 112/726] x86/build: Remove -pipe from KBUILD_CFLAGS Commit 77b0bf55bc67 ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs") added -Wa,- to KBUILD_CFLAGS, which breaks compiling with Clang (hangs indefinitely at compiling init/main.o). This happens because while Clang accepts -pipe (and has it documented in its list of supported flags), it silently ignores it after this 2010 commit (thanks to Nick Desaulniers for tracking this down), meaning that gas just infinitely waits for stdin and never receives it. https://github.com/llvm-mirror/clang/commit/c19a12dc3d441bec62eed55e312b76c12d6d9022 Initially, I had suggested just add -Wa,- to KBUILD_CFLAGS when GCC was being used but that was before realizing it is because Clang doesn't do anything with -pipe. H. Peter Anvin suggested checking to see if -pipe gives us any gains out of GCC. Turns out it might actually be hurting: With -pipe: real 3m40.813s real 3m44.449s real 3m39.648s Without -pipe: real 3m38.492s real 3m38.335s real 3m38.975s The issue of -Wa,- being passed along to gas without -pipe being supported should still probably be fixed on the LLVM side (open issue: https://bugs.llvm.org/show_bug.cgi?id=39410) but this is not as much of a workaround anymore since it helps both GCC and Clang. Suggested-by: H. Peter Anvin Signed-off-by: Nathan Chancellor Signed-off-by: Thomas Gleixner Tested-by: Nick Desaulniers Reviewed-by: Nadav Amit Reviewed-by: Nick Desaulniers Cc: Borislav Petkov Cc: Kees Cook Cc: Masahiro Yamada Link: https://github.com/ClangBuiltLinux/linux/issues/213 Link: https://lkml.kernel.org/r/20181023231125.27976-1-natechancellor@gmail.com --- arch/x86/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 5b562e464009..88398fdf8129 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -213,8 +213,6 @@ ifdef CONFIG_X86_64 KBUILD_LDFLAGS += $(call ld-option, -z max-page-size=0x200000) endif -# Speed up the build -KBUILD_CFLAGS += -pipe # Workaround for a gcc prelease that unfortunately was shipped in a suse release KBUILD_CFLAGS += -Wno-sign-compare # @@ -239,7 +237,7 @@ archheaders: archmacros: $(Q)$(MAKE) $(build)=arch/x86/kernel arch/x86/kernel/macros.s -ASM_MACRO_FLAGS = -Wa,arch/x86/kernel/macros.s -Wa,- +ASM_MACRO_FLAGS = -Wa,arch/x86/kernel/macros.s export ASM_MACRO_FLAGS KBUILD_CFLAGS += $(ASM_MACRO_FLAGS) From 163c8d54a997153ee1a1e07fcac087492ad85b37 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 5 Nov 2018 07:36:28 +0100 Subject: [PATCH 113/726] compiler: remove __no_sanitize_address_or_inline again The __no_sanitize_address_or_inline and __no_kasan_or_inline defines are almost identical. The only difference is that __no_kasan_or_inline does not have the 'notrace' attribute. To be able to replace __no_sanitize_address_or_inline with the older definition, add 'notrace' to __no_kasan_or_inline and change to two users of __no_sanitize_address_or_inline in the s390 code. The 'notrace' option is necessary for e.g. the __load_psw_mask function in arch/s390/include/asm/processor.h. Without the option it is possible to trace __load_psw_mask which leads to kernel stack overflow. Signed-off-by: Martin Schwidefsky Pointed-out-by: Andrey Ryabinin Acked-by: Steven Rostedt (VMware) Signed-off-by: Linus Torvalds --- arch/s390/include/asm/processor.h | 4 ++-- include/linux/compiler-gcc.h | 12 ------------ include/linux/compiler.h | 2 +- 3 files changed, 3 insertions(+), 15 deletions(-) diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 302795c47c06..81038ab357ce 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -236,7 +236,7 @@ static inline unsigned long current_stack_pointer(void) return sp; } -static __no_sanitize_address_or_inline unsigned short stap(void) +static __no_kasan_or_inline unsigned short stap(void) { unsigned short cpu_address; @@ -330,7 +330,7 @@ static inline void __load_psw(psw_t psw) * Set PSW mask to specified value, while leaving the * PSW addr pointing to the next instruction. */ -static __no_sanitize_address_or_inline void __load_psw_mask(unsigned long mask) +static __no_kasan_or_inline void __load_psw_mask(unsigned long mask) { unsigned long addr; psw_t psw; diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index c0f5db3a9621..2010493e1040 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -143,18 +143,6 @@ #define KASAN_ABI_VERSION 3 #endif -/* - * Because __no_sanitize_address conflicts with inlining: - * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 - * we do one or the other. - */ -#ifdef CONFIG_KASAN -#define __no_sanitize_address_or_inline \ - __no_sanitize_address __maybe_unused notrace -#else -#define __no_sanitize_address_or_inline inline -#endif - #if GCC_VERSION >= 50100 #define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 #endif diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 18c80cfa4fc4..06396c1cf127 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -189,7 +189,7 @@ void __read_once_size(const volatile void *p, void *res, int size) * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 * '__maybe_unused' allows us to avoid defined-but-not-used warnings. */ -# define __no_kasan_or_inline __no_sanitize_address __maybe_unused +# define __no_kasan_or_inline __no_sanitize_address notrace __maybe_unused #else # define __no_kasan_or_inline __always_inline #endif From 21b42eb46834f6245a55ac77bdf3e14c034e2864 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 5 Nov 2018 16:51:49 +0900 Subject: [PATCH 114/726] kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used Zhenzhong Duan reported that running 'make O=/build/kernel binrpm-pkg' failed with the following errors: Running 'make O=/build/kernel binrpm-pkg' failed with below two errors. Makefile:600: include/config/auto.conf: No such file or directory + cp make -C /mnt/root/kernel O=/build/kernel image_name make -f /mnt/root/kernel/Makefile ... cp: invalid option -- 'C' Try 'cp --help' for more information. Prior to commit 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code 'make image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. 'make image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by: Zhenzhong Duan Signed-off-by: Masahiro Yamada --- scripts/package/mkspec | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index e05646dc24dc..009147d4718e 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -12,6 +12,7 @@ # how we were called determines which rpms we build and how we build them if [ "$1" = prebuilt ]; then S=DEL + MAKE="$MAKE -f $srctree/Makefile" else S= fi @@ -78,19 +79,19 @@ $S %prep $S %setup -q $S $S %build -$S make %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release} +$S $MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release} $S %install mkdir -p %{buildroot}/boot %ifarch ia64 mkdir -p %{buildroot}/boot/efi - cp \$(make image_name) %{buildroot}/boot/efi/vmlinuz-$KERNELRELEASE + cp \$($MAKE image_name) %{buildroot}/boot/efi/vmlinuz-$KERNELRELEASE ln -s efi/vmlinuz-$KERNELRELEASE %{buildroot}/boot/ %else - cp \$(make image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE + cp \$($MAKE image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE %endif -$M make %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} KBUILD_SRC= modules_install - make %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr KBUILD_SRC= headers_install +$M $MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install + $MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE cp .config %{buildroot}/boot/config-$KERNELRELEASE bzip2 -9 --keep vmlinux From 02826a6ba301b72461c3706e1cc66d5571cd327e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 5 Nov 2018 16:52:34 +0900 Subject: [PATCH 115/726] kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used Ard Biesheuvel reports bindeb-pkg with O= option is broken in the following way: ... LD [M] sound/soc/rockchip/snd-soc-rk3399-gru-sound.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-pcm.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-rt5645.ko LD [M] sound/soc/rockchip/snd-soc-rockchip-spdif.ko LD [M] sound/soc/sh/rcar/snd-soc-rcar.ko fakeroot -u debian/rules binary make KERNELRELEASE=4.19.0-12677-g19beffaf7a99-dirty ARCH=arm64 KBUILD_SRC= intdeb-pkg /bin/bash /home/ard/linux/scripts/package/builddeb Makefile:600: include/config/auto.conf: No such file or directory *** *** Configuration file ".config" not found! *** *** Please run some configurator (e.g. "make oldconfig" or *** "make menuconfig" or "make xconfig"). *** make[12]: *** [syncconfig] Error 1 make[11]: *** [syncconfig] Error 2 make[10]: *** [include/config/auto.conf] Error 2 make[9]: *** [__sub-make] Error 2 ... Prior to commit 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code '$MAKE image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. '$MAKE image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by: Ard Biesheuvel Signed-off-by: Masahiro Yamada Tested-by: Ard Biesheuvel --- scripts/package/builddeb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 90c9a8ac7adb..0b31f4f1f92c 100755 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -81,7 +81,7 @@ else cp System.map "$tmpdir/boot/System.map-$version" cp $KCONFIG_CONFIG "$tmpdir/boot/config-$version" fi -cp "$($MAKE -s image_name)" "$tmpdir/$installed_image_path" +cp "$($MAKE -s -f $srctree/Makefile image_name)" "$tmpdir/$installed_image_path" if grep -q "^CONFIG_OF=y" $KCONFIG_CONFIG ; then # Only some architectures with OF support have this target From 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb Mon Sep 17 00:00:00 2001 From: Frank Sorenson Date: Tue, 30 Oct 2018 15:10:40 -0500 Subject: [PATCH 116/726] sunrpc: correct the computation for page_ptr when truncating When truncating the encode buffer, the page_ptr is getting advanced, causing the next page to be skipped while encoding. The page is still included in the response, so the response contains a page of bogus data. We need to adjust the page_ptr backwards to ensure we encode the next page into the correct place. We saw this triggered when concurrent directory modifications caused nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting call to xdr_truncate_encode() corrupted the READDIR reply. Signed-off-by: Frank Sorenson Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/xdr.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 2bbb8d38d2bf..5cfb9e0a18dc 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -673,11 +673,10 @@ void xdr_truncate_encode(struct xdr_stream *xdr, size_t len) WARN_ON_ONCE(xdr->iov); return; } - if (fraglen) { + if (fraglen) xdr->end = head->iov_base + head->iov_len; - xdr->page_ptr--; - } /* (otherwise assume xdr->end is already set) */ + xdr->page_ptr--; head->iov_len = len; buf->len = len; xdr->p = head->iov_base + head->iov_len; From 6fce3a406108ee6c8a61e2a33e52e9198a626ea0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 4 Oct 2018 11:37:00 +0200 Subject: [PATCH 117/726] drm/etnaviv: fix bogus fence complete check in timeout handler The GPU hardware fences and the job out-fences are on different timelines so it's wrong to compare them. Fix this by only looking at the out-fence. Cc: Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job timeout handler) Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c index 69e9b431bf1f..e5a9fae31ab7 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c @@ -93,7 +93,7 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job) * If the GPU managed to complete this jobs fence, the timout is * spurious. Bail out. */ - if (fence_completed(gpu, submit->out_fence->seqno)) + if (dma_fence_is_signaled(submit->out_fence)) return; /* From c3537fc251503af18085b8f84126d13743663970 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 1 Oct 2018 12:59:26 -0700 Subject: [PATCH 118/726] perf evlist: Move perf_evsel__reset_weak_group into evlist - Move the function from builtin-stat to evlist for reuse - Rename to evlist to match purpose better - Pass the evlist as first argument. - No functional changes Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/r/20181001195927.14211-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 28 +--------------------------- tools/perf/util/evlist.c | 27 +++++++++++++++++++++++++++ tools/perf/util/evlist.h | 3 +++ 3 files changed, 31 insertions(+), 27 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index d1028d7755bb..a635abfa77b6 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -383,32 +383,6 @@ static bool perf_evsel__should_store_id(struct perf_evsel *counter) return STAT_RECORD || counter->attr.read_format & PERF_FORMAT_ID; } -static struct perf_evsel *perf_evsel__reset_weak_group(struct perf_evsel *evsel) -{ - struct perf_evsel *c2, *leader; - bool is_open = true; - - leader = evsel->leader; - pr_debug("Weak group for %s/%d failed\n", - leader->name, leader->nr_members); - - /* - * for_each_group_member doesn't work here because it doesn't - * include the first entry. - */ - evlist__for_each_entry(evsel_list, c2) { - if (c2 == evsel) - is_open = false; - if (c2->leader == leader) { - if (is_open) - perf_evsel__close(c2); - c2->leader = c2; - c2->nr_members = 0; - } - } - return leader; -} - static bool is_target_alive(struct target *_target, struct thread_map *threads) { @@ -477,7 +451,7 @@ try_again: if ((errno == EINVAL || errno == EBADF) && counter->leader != counter && counter->weak_group) { - counter = perf_evsel__reset_weak_group(counter); + counter = perf_evlist__reset_weak_group(evsel_list, counter); goto try_again; } diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index e88e6f9b1463..668d2a9ef0f4 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -1810,3 +1810,30 @@ void perf_evlist__force_leader(struct perf_evlist *evlist) leader->forced_leader = true; } } + +struct perf_evsel *perf_evlist__reset_weak_group(struct perf_evlist *evsel_list, + struct perf_evsel *evsel) +{ + struct perf_evsel *c2, *leader; + bool is_open = true; + + leader = evsel->leader; + pr_debug("Weak group for %s/%d failed\n", + leader->name, leader->nr_members); + + /* + * for_each_group_member doesn't work here because it doesn't + * include the first entry. + */ + evlist__for_each_entry(evsel_list, c2) { + if (c2 == evsel) + is_open = false; + if (c2->leader == leader) { + if (is_open) + perf_evsel__close(c2); + c2->leader = c2; + c2->nr_members = 0; + } + } + return leader; +} diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index dc66436add98..9919eed6d15b 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -312,4 +312,7 @@ bool perf_evlist__exclude_kernel(struct perf_evlist *evlist); void perf_evlist__force_leader(struct perf_evlist *evlist); +struct perf_evsel *perf_evlist__reset_weak_group(struct perf_evlist *evlist, + struct perf_evsel *evsel); + #endif /* __PERF_EVLIST_H */ From cf99ad1424c54fc84b84d3a3deb57a48c340c30a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 1 Oct 2018 12:59:27 -0700 Subject: [PATCH 119/726] perf record: Support weak groups Implement a weak group fallback for 'perf record', similar to the existing 'perf stat' support. This allows to use groups that might be longer than the available counters without failing. Before: $ perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}' -a sleep 1 Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles). /bin/dmesg | grep -i perf may provide additional information. After: $ ./perf record -e '{cycles,cache-misses,cache-references,cpu_clk_unhalted.thread,cycles,cycles,cycles}:W' -a sleep 1 WARNING: No sample_id_all support, falling back to unordered processing [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 8.136 MB perf.data (134069 samples) ] Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/r/20181001195927.14211-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-list.txt | 1 - tools/perf/builtin-record.c | 7 ++++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt index 236b9b97dfdb..667c14e56031 100644 --- a/tools/perf/Documentation/perf-list.txt +++ b/tools/perf/Documentation/perf-list.txt @@ -55,7 +55,6 @@ counted. The following modifiers exist: S - read sample value (PERF_SAMPLE_READ) D - pin the event to the PMU W - group is weak and will fallback to non-group if not schedulable, - only supported in 'perf stat' for now. The 'p' modifier can be used for specifying how precise the instruction address should be. The 'p' modifier can be specified multiple times: diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 10cf889c6d75..488779bc4c8d 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -391,7 +391,12 @@ try_again: ui__warning("%s\n", msg); goto try_again; } - + if ((errno == EINVAL || errno == EBADF) && + pos->leader != pos && + pos->weak_group) { + pos = perf_evlist__reset_weak_group(evlist, pos); + goto try_again; + } rc = -errno; perf_evsel__open_strerror(pos, &opts->target, errno, msg, sizeof(msg)); From ea1fa48c055f833eb25f0c33188feecb7002ada5 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Tue, 23 Oct 2018 17:16:16 +0200 Subject: [PATCH 120/726] perf stat: Handle different PMU names with common prefix On s390 the CPU Measurement Facility for counters now supports 2 PMUs named cpum_cf (CPU Measurement Facility for counters) and cpum_cf_diag (CPU Measurement Facility for diagnostic counters) for one and the same CPU. Running command [root@s35lp76 perf]# ./perf stat -e tx_c_tend \ -- ~/mytests/cf-tx-events 1 Measuring transactions TX_C_TABORT_NO_SPECIAL: 0 expected:0 TX_C_TABORT_SPECIAL: 0 expected:0 TX_C_TEND: 1 expected:1 TX_NC_TABORT: 11 expected:11 TX_NC_TEND: 1 expected:1 Performance counter stats for '/root/mytests/cf-tx-events 1': 2 tx_c_tend 0.002120091 seconds time elapsed 0.000121000 seconds user 0.002127000 seconds sys [root@s35lp76 perf]# displays output which is unexpected (and wrong): 2 tx_c_tend The test program definitely triggers only one transaction, as shown in line 'TX_C_TEND: 1 expected:1'. This is caused by the following call sequence: pmu_lookup() scans and installs a PMU. +--> pmu_aliases() parses all aliases in directory ...//events/* which are file names. +--> pmu_aliases_parse() Read each file in directory and create an new alias entry. This is done with +--> perf_pmu__new_alias() and +--> __perf_pmu__new_alias() which also check for identical alias names. After pmu_aliases() returns, a complete list of event names for this pmu has been created. Now function pmu_add_cpu_aliases() is called to add the events listed in the json | files to the alias list of the cpu. +--> perf_pmu__find_map() Returns a pointer to the json events. Now function pmu_add_cpu_aliases() scans through all events listed in the JSON files for this CPU. Each json event pmu name is compared with the current PMU being built up and if they mismatch, the json event is added to the current PMUs alias list. To avoid duplicate entries the following comparison is done: if (!is_arm_pmu_core(name)) { pname = pe->pmu ? pe->pmu : "cpu"; if (strncmp(pname, name, strlen(pname))) continue; } The culprit is the strncmp() function. Using current s390 PMU naming, the first PMU is 'cpum_cf' and a long list of events is added, among them 'tx_c_tend' When the second PMU named 'cpum_cf_diag' is added, only one event named 'CF_DIAG' is added by the pmu_aliases() function. Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'. Since the CPUID string is the same for both PMUs, json file events for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag' This happens because the strncmp() actually compares: strncmp("cpum_cf", "cpum_cf_diag", 6); The first parameter is the pmu name taken from the event in the json file. The second parameter is the pmu name of the PMU currently being built. They are different, but the length of the compare only tests the common prefix and this returns 0(true) when it should return false. Now all events for PMU cpum_cf are added to the alias list for pmu cpum_cf_diag. Later on in function parse_events_add_pmu() the event 'tx_c_end' is searched in all available PMUs and found twice, adding it two times to the evsel_list global variable which is the root of all events. This results in a counter value of 2 instead of 1. Output with this patch: [root@s35lp76 perf]# ./perf stat -e tx_c_tend \ -- ~/mytests/cf-tx-events 1 Measuring transactions TX_C_TABORT_NO_SPECIAL: 0 expected:0 TX_C_TABORT_SPECIAL: 0 expected:0 TX_C_TEND: 1 expected:1 TX_NC_TABORT: 11 expected:11 TX_NC_TEND: 1 expected:1 Performance counter stats for '/root/mytests/cf-tx-events 1': 1 tx_c_tend 0.001815365 seconds time elapsed 0.000123000 seconds user 0.001756000 seconds sys [root@s35lp76 perf]# Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Reviewed-by: Sebastien Boisvert Cc: Heiko Carstens Cc: Kan Liang Cc: Martin Schwidefsky Cc: stable@vger.kernel.org Fixes: 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform") Link: http://lkml.kernel.org/r/20181023151616.78193-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c index 7799788f662f..7e49baad304d 100644 --- a/tools/perf/util/pmu.c +++ b/tools/perf/util/pmu.c @@ -773,7 +773,7 @@ static void pmu_add_cpu_aliases(struct list_head *head, struct perf_pmu *pmu) if (!is_arm_pmu_core(name)) { pname = pe->pmu ? pe->pmu : "cpu"; - if (strncmp(pname, name, strlen(pname))) + if (strcmp(pname, name)) continue; } From 590ac60d8aa929bd21e35cd95a7d8720d00eb4f3 Mon Sep 17 00:00:00 2001 From: Jin Yao Date: Wed, 31 Oct 2018 19:06:35 +0800 Subject: [PATCH 121/726] perf top: Display the LBR stats in callchain entry 'perf report' has supported the displaying of LBR stats (such as cycles, predicted%) in callchain entry. For example: $ perf report --branch-history --stdio --1.01%--intel_idle mwait.h:29 intel_idle cpufeature.h:164 (cycles:5) intel_idle cpufeature.h:164 (predicted:76.4%) intel_idle mwait.h:102 (cycles:41) intel_idle current.h:15 While 'perf top' doesn't support that. For example: $ perf top -a -b --call-graph branch - 13.86% 0.23% [kernel] [k] __x86_indirect_thunk_rax - 13.65% __x86_indirect_thunk_rax + 1.69% do_syscall_64 + 1.68% do_select + 1.41% ktime_get + 0.70% __schedule + 0.62% do_sys_poll 0.58% __x86_indirect_thunk_rax Actually it's very easy to enable this feature in 'perf top'. With this patch, the result is: $ perf top -a -b --call-graph branch $ - 13.58% 0.00% [kernel] [k] __x86_indirect_thunk_rax $ - 13.57% __x86_indirect_thunk_rax (predicted:93.9%) $ + 1.78% do_select (cycles:2) $ + 1.68% perf_pmu_disable.part.99 (cycles:1) $ + 1.45% ___sys_recvmsg (cycles:25) $ + 0.81% unix_stream_sendmsg (cycles:18) $ + 0.80% ktime_get (cycles:400) $ 0.58% pick_next_task_fair (cycles:47) $ + 0.56% i915_request_retire (cycles:2) $ + 0.52% do_sys_poll (cycles:4) Signed-off-by: Jin Yao Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1540983995-20462-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index b2838de13de0..aa0c73e57924 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1429,6 +1429,9 @@ int cmd_top(int argc, const char **argv) } } + if (opts->branch_stack && callchain_param.enabled) + symbol_conf.show_branchflag_count = true; + sort__mode = SORT_MODE__TOP; /* display thread wants entries to be collapsed in a different tree */ perf_hpp_list.need_collapse = 1; From 5ed4419d47f8ba6bbccd8e3203276b3c39a792b7 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Sun, 4 Nov 2018 17:12:35 +0200 Subject: [PATCH 122/726] perf scripts python: exported-sql-viewer.py: Fall back to /usr/local/lib/libxed.so Fall back to /usr/local/lib/libxed.so to cater for distributions that do not have /usr/local/lib in the library path by default. Signed-off-by: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20181104151238.15947-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/scripts/python/exported-sql-viewer.py | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index 24cb0bd56afa..20cc8e7879b9 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -1929,7 +1929,12 @@ class XEDInstruction(): class LibXED(): def __init__(self): - self.libxed = CDLL("libxed.so") + try: + self.libxed = CDLL("libxed.so") + except: + self.libxed = None + if not self.libxed: + self.libxed = CDLL("/usr/local/lib/libxed.so") self.xed_tables_init = self.libxed.xed_tables_init self.xed_tables_init.restype = None From 210cf1f96185f0c6383df8b6030e3d2945e1b41a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Sun, 4 Nov 2018 17:12:36 +0200 Subject: [PATCH 123/726] perf scripts python: exported-sql-viewer.py: Add Selected branches report Fetching data from the database can be slow. Add a report that provides the ability to select a subset of branches. Signed-off-by: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20181104151238.15947-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../scripts/python/exported-sql-viewer.py | 327 ++++++++++++++++++ 1 file changed, 327 insertions(+) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index 20cc8e7879b9..a9d2b3170141 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -119,6 +119,14 @@ def dsoname(name): return "[kernel]" return name +def findnth(s, sub, n, offs=0): + pos = s.find(sub) + if pos < 0: + return pos + if n <= 1: + return offs + pos + return findnth(s[pos + 1:], sub, n - 1, offs + pos + 1) + # Percent to one decimal place def PercentToOneDP(n, d): @@ -1464,6 +1472,317 @@ class BranchWindow(QMdiSubWindow): else: self.find_bar.NotFound() +# Dialog data item converted and validated using a SQL table + +class SQLTableDialogDataItem(): + + def __init__(self, glb, label, placeholder_text, table_name, match_column, column_name1, column_name2, parent): + self.glb = glb + self.label = label + self.placeholder_text = placeholder_text + self.table_name = table_name + self.match_column = match_column + self.column_name1 = column_name1 + self.column_name2 = column_name2 + self.parent = parent + + self.value = "" + + self.widget = QLineEdit() + self.widget.editingFinished.connect(self.Validate) + self.widget.textChanged.connect(self.Invalidate) + self.red = False + self.error = "" + self.validated = True + + self.last_id = 0 + self.first_time = 0 + self.last_time = 2 ** 64 + if self.table_name == "": + query = QSqlQuery(self.glb.db) + QueryExec(query, "SELECT id, time FROM samples ORDER BY id DESC LIMIT 1") + if query.next(): + self.last_id = int(query.value(0)) + self.last_time = int(query.value(1)) + QueryExec(query, "SELECT time FROM samples WHERE time != 0 ORDER BY id LIMIT 1") + if query.next(): + self.first_time = int(query.value(0)) + if placeholder_text: + placeholder_text += ", between " + str(self.first_time) + " and " + str(self.last_time) + + if placeholder_text: + self.widget.setPlaceholderText(placeholder_text) + + def ValueToIds(self, value): + ids = [] + query = QSqlQuery(self.glb.db) + stmt = "SELECT id FROM " + self.table_name + " WHERE " + self.match_column + " = '" + value + "'" + ret = query.exec_(stmt) + if ret: + while query.next(): + ids.append(str(query.value(0))) + return ids + + def IdBetween(self, query, lower_id, higher_id, order): + QueryExec(query, "SELECT id FROM samples WHERE id > " + str(lower_id) + " AND id < " + str(higher_id) + " ORDER BY id " + order + " LIMIT 1") + if query.next(): + return True, int(query.value(0)) + else: + return False, 0 + + def BinarySearchTime(self, lower_id, higher_id, target_time, get_floor): + query = QSqlQuery(self.glb.db) + while True: + next_id = int((lower_id + higher_id) / 2) + QueryExec(query, "SELECT time FROM samples WHERE id = " + str(next_id)) + if not query.next(): + ok, dbid = self.IdBetween(query, lower_id, next_id, "DESC") + if not ok: + ok, dbid = self.IdBetween(query, next_id, higher_id, "") + if not ok: + return str(higher_id) + next_id = dbid + QueryExec(query, "SELECT time FROM samples WHERE id = " + str(next_id)) + next_time = int(query.value(0)) + if get_floor: + if target_time > next_time: + lower_id = next_id + else: + higher_id = next_id + if higher_id <= lower_id + 1: + return str(higher_id) + else: + if target_time >= next_time: + lower_id = next_id + else: + higher_id = next_id + if higher_id <= lower_id + 1: + return str(lower_id) + + def ConvertRelativeTime(self, val): + print "val ", val + mult = 1 + suffix = val[-2:] + if suffix == "ms": + mult = 1000000 + elif suffix == "us": + mult = 1000 + elif suffix == "ns": + mult = 1 + else: + return val + val = val[:-2].strip() + if not self.IsNumber(val): + return val + val = int(val) * mult + if val >= 0: + val += self.first_time + else: + val += self.last_time + return str(val) + + def ConvertTimeRange(self, vrange): + print "vrange ", vrange + if vrange[0] == "": + vrange[0] = str(self.first_time) + if vrange[1] == "": + vrange[1] = str(self.last_time) + vrange[0] = self.ConvertRelativeTime(vrange[0]) + vrange[1] = self.ConvertRelativeTime(vrange[1]) + print "vrange2 ", vrange + if not self.IsNumber(vrange[0]) or not self.IsNumber(vrange[1]): + return False + print "ok1" + beg_range = max(int(vrange[0]), self.first_time) + end_range = min(int(vrange[1]), self.last_time) + if beg_range > self.last_time or end_range < self.first_time: + return False + print "ok2" + vrange[0] = self.BinarySearchTime(0, self.last_id, beg_range, True) + vrange[1] = self.BinarySearchTime(1, self.last_id + 1, end_range, False) + print "vrange3 ", vrange + return True + + def AddTimeRange(self, value, ranges): + print "value ", value + n = value.count("-") + if n == 1: + pass + elif n == 2: + if value.split("-")[1].strip() == "": + n = 1 + elif n == 3: + n = 2 + else: + return False + pos = findnth(value, "-", n) + vrange = [value[:pos].strip() ,value[pos+1:].strip()] + if self.ConvertTimeRange(vrange): + ranges.append(vrange) + return True + return False + + def InvalidValue(self, value): + self.value = "" + palette = QPalette() + palette.setColor(QPalette.Text,Qt.red) + self.widget.setPalette(palette) + self.red = True + self.error = self.label + " invalid value '" + value + "'" + self.parent.ShowMessage(self.error) + + def IsNumber(self, value): + try: + x = int(value) + except: + x = 0 + return str(x) == value + + def Invalidate(self): + self.validated = False + + def Validate(self): + input_string = self.widget.text() + self.validated = True + if self.red: + palette = QPalette() + self.widget.setPalette(palette) + self.red = False + if not len(input_string.strip()): + self.error = "" + self.value = "" + return + if self.table_name == "": + ranges = [] + for value in [x.strip() for x in input_string.split(",")]: + if not self.AddTimeRange(value, ranges): + return self.InvalidValue(value) + ranges = [("(" + self.column_name1 + " >= " + r[0] + " AND " + self.column_name1 + " <= " + r[1] + ")") for r in ranges] + self.value = " OR ".join(ranges) + elif self.table_name == "": + singles = [] + ranges = [] + for value in [x.strip() for x in input_string.split(",")]: + if "-" in value: + vrange = value.split("-") + if len(vrange) != 2 or not self.IsNumber(vrange[0]) or not self.IsNumber(vrange[1]): + return self.InvalidValue(value) + ranges.append(vrange) + else: + if not self.IsNumber(value): + return self.InvalidValue(value) + singles.append(value) + ranges = [("(" + self.column_name1 + " >= " + r[0] + " AND " + self.column_name1 + " <= " + r[1] + ")") for r in ranges] + if len(singles): + ranges.append(self.column_name1 + " IN (" + ",".join(singles) + ")") + self.value = " OR ".join(ranges) + elif self.table_name: + all_ids = [] + for value in [x.strip() for x in input_string.split(",")]: + ids = self.ValueToIds(value) + if len(ids): + all_ids.extend(ids) + else: + return self.InvalidValue(value) + self.value = self.column_name1 + " IN (" + ",".join(all_ids) + ")" + if self.column_name2: + self.value = "( " + self.value + " OR " + self.column_name2 + " IN (" + ",".join(all_ids) + ") )" + else: + self.value = input_string.strip() + self.error = "" + self.parent.ClearMessage() + + def IsValid(self): + if not self.validated: + self.Validate() + if len(self.error): + self.parent.ShowMessage(self.error) + return False + return True + +# Selected branch report creation dialog + +class SelectedBranchDialog(QDialog): + + def __init__(self, glb, parent=None): + super(SelectedBranchDialog, self).__init__(parent) + + self.glb = glb + + self.name = "" + self.where_clause = "" + + self.setWindowTitle("Selected Branches") + self.setMinimumWidth(600) + + items = ( + ("Report name:", "Enter a name to appear in the window title bar", "", "", "", ""), + ("Time ranges:", "Enter time ranges", "", "", "samples.id", ""), + ("CPUs:", "Enter CPUs or ranges e.g. 0,5-6", "", "", "cpu", ""), + ("Commands:", "Only branches with these commands will be included", "comms", "comm", "comm_id", ""), + ("PIDs:", "Only branches with these process IDs will be included", "threads", "pid", "thread_id", ""), + ("TIDs:", "Only branches with these thread IDs will be included", "threads", "tid", "thread_id", ""), + ("DSOs:", "Only branches with these DSOs will be included", "dsos", "short_name", "samples.dso_id", "to_dso_id"), + ("Symbols:", "Only branches with these symbols will be included", "symbols", "name", "symbol_id", "to_symbol_id"), + ("Raw SQL clause: ", "Enter a raw SQL WHERE clause", "", "", "", ""), + ) + self.data_items = [SQLTableDialogDataItem(glb, *x, parent=self) for x in items] + + self.grid = QGridLayout() + + for row in xrange(len(self.data_items)): + self.grid.addWidget(QLabel(self.data_items[row].label), row, 0) + self.grid.addWidget(self.data_items[row].widget, row, 1) + + self.status = QLabel() + + self.ok_button = QPushButton("Ok", self) + self.ok_button.setDefault(True) + self.ok_button.released.connect(self.Ok) + self.ok_button.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) + + self.cancel_button = QPushButton("Cancel", self) + self.cancel_button.released.connect(self.reject) + self.cancel_button.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) + + self.hbox = QHBoxLayout() + #self.hbox.addStretch() + self.hbox.addWidget(self.status) + self.hbox.addWidget(self.ok_button) + self.hbox.addWidget(self.cancel_button) + + self.vbox = QVBoxLayout() + self.vbox.addLayout(self.grid) + self.vbox.addLayout(self.hbox) + + self.setLayout(self.vbox); + + def Ok(self): + self.name = self.data_items[0].value + if not self.name: + self.ShowMessage("Report name is required") + return + for d in self.data_items: + if not d.IsValid(): + return + for d in self.data_items[1:]: + if len(d.value): + if len(self.where_clause): + self.where_clause += " AND " + self.where_clause += d.value + if len(self.where_clause): + self.where_clause = " AND ( " + self.where_clause + " ) " + else: + self.ShowMessage("No selection") + return + self.accept() + + def ShowMessage(self, msg): + self.status.setText("" + msg) + + def ClearMessage(self): + self.status.setText("") + # Event list def GetEventList(db): @@ -1888,6 +2207,8 @@ class MainWindow(QMainWindow): if event == "branches": label = "All branches" if branches_events == 1 else "All branches " + "(id=" + dbid + ")" reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda x=dbid: self.NewBranchView(x), self)) + label = "Selected branches" if branches_events == 1 else "Selected branches " + "(id=" + dbid + ")" + reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda x=dbid: self.NewSelectedBranchView(x), self)) def TableMenu(self, tables, menu): table_menu = menu.addMenu("&Tables") @@ -1900,6 +2221,12 @@ class MainWindow(QMainWindow): def NewBranchView(self, event_id): BranchWindow(self.glb, event_id, "", "", self) + def NewSelectedBranchView(self, event_id): + dialog = SelectedBranchDialog(self.glb, self) + ret = dialog.exec_() + if ret: + BranchWindow(self.glb, event_id, dialog.name, dialog.where_clause, self) + def NewTableView(self, table_name): TableWindow(self.glb, table_name, self) From 65b24292e8f34df22a16bf7c47823325ac247572 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Sun, 4 Nov 2018 17:12:37 +0200 Subject: [PATCH 124/726] perf scripts python: exported-sql-viewer.py: Add help window Add a window to display help. It is also possible to display the help only, by using the option "--help-only" instead of a database name. Signed-off-by: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20181104151238.15947-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../scripts/python/exported-sql-viewer.py | 155 +++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index a9d2b3170141..c2fcf6c5237a 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -2084,6 +2084,147 @@ class WindowMenu(): def setActiveSubWindow(self, nr): self.mdi_area.setActiveSubWindow(self.mdi_area.subWindowList()[nr - 1]) +# Help text + +glb_help_text = """ +

Contents

+ +

1. Reports

+

1.1 Context-Sensitive Call Graph

+

1.2 All branches

+

1.3 Selected branches

+

2. Tables

+

1. Reports

+

1.1 Context-Sensitive Call Graph

+The result is a GUI window with a tree representing a context-sensitive +call-graph. Expanding a couple of levels of the tree and adjusting column +widths to suit will display something like: +
+                                         Call Graph: pt_example
+Call Path                          Object      Count   Time(ns)  Time(%)  Branch Count   Branch Count(%)
+v- ls
+    v- 2638:2638
+        v- _start                  ld-2.19.so    1     10074071   100.0         211135            100.0
+          |- unknown               unknown       1        13198     0.1              1              0.0
+          >- _dl_start             ld-2.19.so    1      1400980    13.9          19637              9.3
+          >- _d_linit_internal     ld-2.19.so    1       448152     4.4          11094              5.3
+          v-__libc_start_main@plt  ls            1      8211741    81.5         180397             85.4
+             >- _dl_fixup          ld-2.19.so    1         7607     0.1            108              0.1
+             >- __cxa_atexit       libc-2.19.so  1        11737     0.1             10              0.0
+             >- __libc_csu_init    ls            1        10354     0.1             10              0.0
+             |- _setjmp            libc-2.19.so  1            0     0.0              4              0.0
+             v- main               ls            1      8182043    99.6         180254             99.9
+
+

Points to note:

+
    +
  • The top level is a command name (comm)
    • +
  • The next level is a thread (pid:tid)
    • +
  • Subsequent levels are functions
    • +
  • 'Count' is the number of calls
    • +
  • 'Time' is the elapsed time until the function returns
    • +
  • Percentages are relative to the level above
    • +
  • 'Branch Count' is the total number of branches for that function and all functions that it calls +
+

Find

+Ctrl-F displays a Find bar which finds function names by either an exact match or a pattern match. +The pattern matching symbols are ? for any character and * for zero or more characters. +

1.2 All branches

+The All branches report displays all branches in chronological order. +Not all data is fetched immediately. More records can be fetched using the Fetch bar provided. +

Disassembly

+Open a branch to display disassembly. This only works if: +
    +
  1. The disassembler is available. Currently, only Intel XED is supported - see Intel XED Setup
    2. +
  2. The object code is available. Currently, only the perf build ID cache is searched for object code. +The default directory ~/.debug can be overridden by setting environment variable PERF_BUILDID_DIR. +One exception is kcore where the DSO long name is used (refer dsos_view on the Tables menu), +or alternatively, set environment variable PERF_KCORE to the kcore file name.
    3. +
+

Intel XED Setup

+To use Intel XED, libxed.so must be present. To build and install libxed.so: +
+git clone https://github.com/intelxed/mbuild.git mbuild
+git clone https://github.com/intelxed/xed
+cd xed
+./mfile.py --share
+sudo ./mfile.py --prefix=/usr/local install
+sudo ldconfig
+
+

Find

+Ctrl-F displays a Find bar which finds substrings by either an exact match or a regular expression match. +Refer to Python documentation for the regular expression syntax. +All columns are searched, but only currently fetched rows are searched. +

1.3 Selected branches

+This is the same as the All branches report but with the data reduced +by various selection criteria. A dialog box displays available criteria which are AND'ed together. +

1.3.1 Time ranges

+The time ranges hint text shows the total time range. Relative time ranges can also be entered in +ms, us or ns. Also, negative values are relative to the end of trace. Examples: +
+	81073085947329-81073085958238	From 81073085947329 to 81073085958238
+	100us-200us		From 100us to 200us
+	10ms-			From 10ms to the end
+	-100ns			The first 100ns
+	-10ms-			The last 10ms
+
+N.B. Due to the granularity of timestamps, there could be no branches in any given time range. +

2. Tables

+The Tables menu shows all tables and views in the database. Most tables have an associated view +which displays the information in a more friendly way. Not all data for large tables is fetched +immediately. More records can be fetched using the Fetch bar provided. Columns can be sorted, +but that can be slow for large tables. +

There are also tables of database meta-information. +For SQLite3 databases, the sqlite_master table is included. +For PostgreSQL databases, information_schema.tables/views/columns are included. +

Find

+Ctrl-F displays a Find bar which finds substrings by either an exact match or a regular expression match. +Refer to Python documentation for the regular expression syntax. +All columns are searched, but only currently fetched rows are searched. +""" + +# Help window + +class HelpWindow(QMdiSubWindow): + + def __init__(self, glb, parent=None): + super(HelpWindow, self).__init__(parent) + + self.text = QTextBrowser() + self.text.setHtml(glb_help_text) + self.text.setReadOnly(True) + self.text.setOpenExternalLinks(True) + + self.setWidget(self.text) + + AddSubWindow(glb.mainwindow.mdi_area, self, "Exported SQL Viewer Help") + +# Main window that only displays the help text + +class HelpOnlyWindow(QMainWindow): + + def __init__(self, parent=None): + super(HelpOnlyWindow, self).__init__(parent) + + self.setMinimumSize(200, 100) + self.resize(800, 600) + self.setWindowTitle("Exported SQL Viewer Help") + self.setWindowIcon(self.style().standardIcon(QStyle.SP_MessageBoxInformation)) + + self.text = QTextBrowser() + self.text.setHtml(glb_help_text) + self.text.setReadOnly(True) + self.text.setOpenExternalLinks(True) + + self.setCentralWidget(self.text) + # Font resize def ResizeFont(widget, diff): @@ -2170,6 +2311,9 @@ class MainWindow(QMainWindow): self.window_menu = WindowMenu(self.mdi_area, menu) + help_menu = menu.addMenu("&Help") + help_menu.addAction(CreateAction("&Exported SQL Viewer Help", "Helpful information", self.Help, self, QKeySequence.HelpContents)) + def Find(self): win = self.mdi_area.activeSubWindow() if win: @@ -2230,6 +2374,9 @@ class MainWindow(QMainWindow): def NewTableView(self, table_name): TableWindow(self.glb, table_name, self) + def Help(self): + HelpWindow(self.glb, self) + # XED Disassembler class xed_state_t(Structure): @@ -2429,10 +2576,16 @@ class DBRef(): def Main(): if (len(sys.argv) < 2): - print >> sys.stderr, "Usage is: exported-sql-viewer.py " + print >> sys.stderr, "Usage is: exported-sql-viewer.py { | --help-only}" raise Exception("Too few arguments") dbname = sys.argv[1] + if dbname == "--help-only": + app = QApplication(sys.argv) + mainwindow = HelpOnlyWindow() + mainwindow.show() + err = app.exec_() + sys.exit(err) is_sqlite3 = False try: From 35fa1cee21e34f43db928d022610707d5a234faf Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Sun, 4 Nov 2018 17:12:38 +0200 Subject: [PATCH 125/726] perf scripts python: exported-sql-viewer.py: Fix table find when table re-ordered Table rows can be re-ordered by selecting a column to sort by. After re-ordering, the "find" operation was highlighting the wrong row, fix it. Signed-off-by: Adrian Hunter Cc: Andi Kleen Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20181104151238.15947-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/scripts/python/exported-sql-viewer.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index c2fcf6c5237a..f278ce5ebab7 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -1975,7 +1975,7 @@ class TableWindow(QMdiSubWindow, ResizeColumnsToContentsBase): def FindDone(self, row): self.find_bar.Idle() if row >= 0: - self.view.setCurrentIndex(self.model.index(row, 0, QModelIndex())) + self.view.setCurrentIndex(self.model.mapFromSource(self.data_model.index(row, 0, QModelIndex()))) else: self.find_bar.NotFound() @@ -2188,6 +2188,8 @@ For PostgreSQL databases, information_schema.tables/views/columns are included. Ctrl-F displays a Find bar which finds substrings by either an exact match or a regular expression match. Refer to Python documentation for the regular expression syntax. All columns are searched, but only currently fetched rows are searched. +

N.B. Results are found in id order, so if the table is re-ordered, find-next and find-previous +will go to the next/previous result in id order, instead of display order. """ # Help window From 93f8be2799515e01647c5a9b0d17a90a00ebcf82 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 5 Nov 2018 09:35:04 +0200 Subject: [PATCH 126/726] perf intel-pt: Add more event information to debug log More event information is useful for debugging, especially MMAP events. Signed-off-by: Adrian Hunter Link: http://lkml.kernel.org/r/20181105073505.8129-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/intel-pt-decoder/intel-pt-log.c | 5 +++++ tools/perf/util/intel-pt-decoder/intel-pt-log.h | 1 + tools/perf/util/intel-pt.c | 16 +++++++++++++--- 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-log.c b/tools/perf/util/intel-pt-decoder/intel-pt-log.c index e02bc7b166a0..5e64da270f97 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-log.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-log.c @@ -31,6 +31,11 @@ static FILE *f; static char log_name[MAX_LOG_NAME]; bool intel_pt_enable_logging; +void *intel_pt_log_fp(void) +{ + return f; +} + void intel_pt_log_enable(void) { intel_pt_enable_logging = true; diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-log.h b/tools/perf/util/intel-pt-decoder/intel-pt-log.h index 45b64f93f358..cc084937f701 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-log.h +++ b/tools/perf/util/intel-pt-decoder/intel-pt-log.h @@ -22,6 +22,7 @@ struct intel_pt_pkt; +void *intel_pt_log_fp(void); void intel_pt_log_enable(void); void intel_pt_log_disable(void); void intel_pt_log_set_name(const char *name); diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c index 86cc9a64e982..149ff361ca78 100644 --- a/tools/perf/util/intel-pt.c +++ b/tools/perf/util/intel-pt.c @@ -206,6 +206,16 @@ static void intel_pt_dump_event(struct intel_pt *pt, unsigned char *buf, intel_pt_dump(pt, buf, len); } +static void intel_pt_log_event(union perf_event *event) +{ + FILE *f = intel_pt_log_fp(); + + if (!intel_pt_enable_logging || !f) + return; + + perf_event__fprintf(event, f); +} + static int intel_pt_do_fix_overlap(struct intel_pt *pt, struct auxtrace_buffer *a, struct auxtrace_buffer *b) { @@ -2010,9 +2020,9 @@ static int intel_pt_process_event(struct perf_session *session, event->header.type == PERF_RECORD_SWITCH_CPU_WIDE) err = intel_pt_context_switch(pt, event, sample); - intel_pt_log("event %s (%u): cpu %d time %"PRIu64" tsc %#"PRIx64"\n", - perf_event__name(event->header.type), event->header.type, - sample->cpu, sample->time, timestamp); + intel_pt_log("event %u: cpu %d time %"PRIu64" tsc %#"PRIx64" ", + event->header.type, sample->cpu, sample->time, timestamp); + intel_pt_log_event(event); return err; } From f6c23e3b55cb93f32a724f41af8d38888bc2ab6b Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 5 Nov 2018 09:35:05 +0200 Subject: [PATCH 127/726] perf intel-pt: Add MTC and CYC timestamps to debug log One cause of decoding errors is un-synchronized side-band data. Timestamps are needed to debug such cases. TSC packet timestamps are logged. Log also MTC and CYC timestamps. Signed-off-by: Adrian Hunter Link: http://lkml.kernel.org/r/20181105073505.8129-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index 58f6a9ceb590..4503f3ca45ab 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -1474,6 +1474,8 @@ static void intel_pt_calc_mtc_timestamp(struct intel_pt_decoder *decoder) decoder->have_calc_cyc_to_tsc = false; intel_pt_calc_cyc_to_tsc(decoder, true); } + + intel_pt_log_to("Setting timestamp", decoder->timestamp); } static void intel_pt_calc_cbr(struct intel_pt_decoder *decoder) @@ -1514,6 +1516,8 @@ static void intel_pt_calc_cyc_timestamp(struct intel_pt_decoder *decoder) decoder->timestamp = timestamp; decoder->timestamp_insn_cnt = 0; + + intel_pt_log_to("Setting timestamp", decoder->timestamp); } /* Walk PSB+ packets when already in sync. */ From c0fae7e2452b90c31edd2d25eb3baf0c76b400ca Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 27 Oct 2018 01:46:34 +0300 Subject: [PATCH 128/726] MIPS: OCTEON: fix out of bounds array access on CN68XX The maximum number of interfaces is returned by cvmx_helper_get_number_of_interfaces(), and the value is used to access interface_port_count[]. When CN68XX support was added, we forgot to increase the array size. Fix that. Fixes: 2c8c3f0201333 ("MIPS: Octeon: Support additional interfaces on CN68XX") Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20949/ Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.3+ --- arch/mips/cavium-octeon/executive/cvmx-helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index 75108ec669eb..6c79e8a16a26 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority) (int pko_port, void (*cvmx_override_ipd_port_setup) (int ipd_port); /* Port count per interface */ -static int interface_port_count[5]; +static int interface_port_count[9]; /** * Return the number of interfaces the chip has. Each interface From d01501f85249848a2497968d46dd46d5c6fe32e6 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 1 Nov 2018 07:54:24 +0000 Subject: [PATCH 129/726] MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation Fix a MIPS `dma_alloc_coherent' regression from commit bc3ec75de545 ("dma-mapping: merge direct and noncoherent ops") that causes a cached allocation to be returned on noncoherent cache systems. This is due to an inverted check now used in the MIPS implementation of `arch_dma_alloc' on the result from `dma_direct_alloc_pages' before doing the cached-to-uncached mapping of the allocation address obtained. The mapping has to be done for a non-NULL rather than NULL result, because a NULL result means the allocation has failed. Invert the check for correct operation then. Signed-off-by: Maciej W. Rozycki Signed-off-by: Paul Burton Reviewed-by: Christoph Hellwig Fixes: bc3ec75de545 ("dma-mapping: merge direct and noncoherent ops") Patchwork: https://patchwork.linux-mips.org/patch/20965/ --- arch/mips/mm/dma-noncoherent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index e6c9485cadcf..cb38461391cb 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -50,7 +50,7 @@ void *arch_dma_alloc(struct device *dev, size_t size, void *ret; ret = dma_direct_alloc_pages(dev, size, dma_handle, gfp, attrs); - if (!ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) { + if (ret && !(attrs & DMA_ATTR_NON_CONSISTENT)) { dma_cache_wback_inv((unsigned long) ret, size); ret = (void *)UNCAC_ADDR(ret); } From e2c39f36c354a06c6e9d32d4fdf8660b41803d82 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 5 Nov 2018 15:46:51 -0300 Subject: [PATCH 130/726] perf beauty: Use SRCARCH, ARCH=x86_64 must map to "x86" to find the headers Guenter reported that using ARCH=x86_64 to build perf has regressed: $ make -C tools/perf O=/tmp/build/perf ARCH=x86_64 make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j4' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... bpf: [ on ] GEN /tmp/build/perf/common-cmds.h make[2]: *** No rule to make target '/home/acme/git/perf/tools/arch/x86_64/include/uapi/asm//mman.h', needed by '/tmp/build/perf/trace/beauty/generated/mmap_flags_array.c'. Stop. make[2]: *** Waiting for unfinished jobs.... PERF_VERSION = 4.19.gf6c23e3 make[1]: *** [Makefile.perf:207: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ This is because we must use $(SRCARCH) where we were using $(ARCH), so that, just like the top level Makefile, we get this done: # Additional ARCH settings for x86 ifeq ($(ARCH),i386) SRCARCH := x86 endif ifeq ($(ARCH),x86_64) SRCARCH := x86 endif Which is done in tools/scripts/Makefile.arch, so switch to use $(SRCARCH). Reported-by: Guenter Roeck Cc: Adrian Hunter Cc: Clark Williams Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Fixes: fbd7458db757 ("perf beauty: Wire up the mmap flags table generator to the Makefile") Link: https://lkml.kernel.org/r/20181105184612.GD7077@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.perf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 3ccb4f0bf088..d95655489f7e 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -387,7 +387,7 @@ SHELL = $(SHELL_PATH) linux_uapi_dir := $(srctree)/tools/include/uapi/linux asm_generic_uapi_dir := $(srctree)/tools/include/uapi/asm-generic -arch_asm_uapi_dir := $(srctree)/tools/arch/$(ARCH)/include/uapi/asm/ +arch_asm_uapi_dir := $(srctree)/tools/arch/$(SRCARCH)/include/uapi/asm/ beauty_outdir := $(OUTPUT)trace/beauty/generated beauty_ioctl_outdir := $(beauty_outdir)/ioctl From fd5ba6ee3187617287fb9cb187e3d6b3631210a3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 2 Nov 2018 21:10:48 +0200 Subject: [PATCH 131/726] arm64: dts: stratix10: fix multicast filtering On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: stable@vger.kernel.org Signed-off-by: Aaro Koskinen Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 8253a1a9e985..fef7351e9f67 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -139,6 +139,7 @@ clock-names = "stmmaceth"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; status = "disabled"; }; @@ -154,6 +155,7 @@ clock-names = "stmmaceth"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; status = "disabled"; }; @@ -169,6 +171,7 @@ clock-names = "stmmaceth"; tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; status = "disabled"; }; From 6ac2226229d931153331a93d90655a3de05b9290 Mon Sep 17 00:00:00 2001 From: Gustavo Romero Date: Thu, 1 Nov 2018 20:13:21 -0400 Subject: [PATCH 132/726] perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so Currently jvmti agent can not be used because function scnprintf is not present in the agent libperf-jvmti.so. As a result the JVM when using such agent to record JITed code profiling information will fail on looking up scnprintf: java: symbol lookup error: lib/libperf-jvmti.so: undefined symbol: scnprintf This commit fixes that by reverting to the use of snprintf, that can be looked up, instead of scnprintf, adding a proper check for the returned value in order to print a better error message when the jitdump file pathname is too long. Checking the returned value also helps to comply with some recent gcc versions, like gcc8, which will fail due to truncated writing checks related to the -Werror=format-truncation= flag. Signed-off-by: Gustavo Romero Acked-by: Jiri Olsa LPU-Reference: 1541117601-18937-2-git-send-email-gromero@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-mvpxxxy7wnzaj74cq75muw3f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/jvmti/jvmti_agent.c | 49 ++++++++++++++++++++++++++-------- 1 file changed, 38 insertions(+), 11 deletions(-) diff --git a/tools/perf/jvmti/jvmti_agent.c b/tools/perf/jvmti/jvmti_agent.c index ac1bcdc17dae..f7eb63cbbc65 100644 --- a/tools/perf/jvmti/jvmti_agent.c +++ b/tools/perf/jvmti/jvmti_agent.c @@ -125,7 +125,7 @@ perf_get_timestamp(void) } static int -debug_cache_init(void) +create_jit_cache_dir(void) { char str[32]; char *base, *p; @@ -144,8 +144,13 @@ debug_cache_init(void) strftime(str, sizeof(str), JIT_LANG"-jit-%Y%m%d", &tm); - snprintf(jit_path, PATH_MAX - 1, "%s/.debug/", base); - + ret = snprintf(jit_path, PATH_MAX, "%s/.debug/", base); + if (ret >= PATH_MAX) { + warnx("jvmti: cannot generate jit cache dir because %s/.debug/" + " is too long, please check the cwd, JITDUMPDIR, and" + " HOME variables", base); + return -1; + } ret = mkdir(jit_path, 0755); if (ret == -1) { if (errno != EEXIST) { @@ -154,20 +159,32 @@ debug_cache_init(void) } } - snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit", base); + ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit", base); + if (ret >= PATH_MAX) { + warnx("jvmti: cannot generate jit cache dir because" + " %s/.debug/jit is too long, please check the cwd," + " JITDUMPDIR, and HOME variables", base); + return -1; + } ret = mkdir(jit_path, 0755); if (ret == -1) { if (errno != EEXIST) { - warn("cannot create jit cache dir %s", jit_path); + warn("jvmti: cannot create jit cache dir %s", jit_path); return -1; } } - snprintf(jit_path, PATH_MAX - 1, "%s/.debug/jit/%s.XXXXXXXX", base, str); - + ret = snprintf(jit_path, PATH_MAX, "%s/.debug/jit/%s.XXXXXXXX", base, str); + if (ret >= PATH_MAX) { + warnx("jvmti: cannot generate jit cache dir because" + " %s/.debug/jit/%s.XXXXXXXX is too long, please check" + " the cwd, JITDUMPDIR, and HOME variables", + base, str); + return -1; + } p = mkdtemp(jit_path); if (p != jit_path) { - warn("cannot create jit cache dir %s", jit_path); + warn("jvmti: cannot create jit cache dir %s", jit_path); return -1; } @@ -228,7 +245,7 @@ void *jvmti_open(void) { char dump_path[PATH_MAX]; struct jitheader header; - int fd; + int fd, ret; FILE *fp; init_arch_timestamp(); @@ -245,12 +262,22 @@ void *jvmti_open(void) memset(&header, 0, sizeof(header)); - debug_cache_init(); + /* + * jitdump file dir + */ + if (create_jit_cache_dir() < 0) + return NULL; /* * jitdump file name */ - scnprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); + ret = snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid()); + if (ret >= PATH_MAX) { + warnx("jvmti: cannot generate jitdump file full path because" + " %s/jit-%i.dump is too long, please check the cwd," + " JITDUMPDIR, and HOME variables", jit_path, getpid()); + return NULL; + } fd = open(dump_path, O_CREAT|O_TRUNC|O_RDWR, 0666); if (fd == -1) From af31b04b67f4fd7f639fd465a507c154c46fc9fb Mon Sep 17 00:00:00 2001 From: Masayoshi Mizuma Date: Tue, 30 Oct 2018 21:50:25 -0400 Subject: [PATCH 133/726] tools/testing/nvdimm: Fix the array size for dimm devices. KASAN reports following global out of bounds access while nfit_test is being loaded. The out of bound access happens the following reference to dimm_fail_cmd_flags[dimm]. 'dimm' is over than the index value, NUM_DCR (==5). static int override_return_code(int dimm, unsigned int func, int rc) { if ((1 << func) & dimm_fail_cmd_flags[dimm]) { dimm_fail_cmd_flags[] definition: static unsigned long dimm_fail_cmd_flags[NUM_DCR]; 'dimm' is the return value of get_dimm(), and get_dimm() returns the index of handle[] array. The handle[] has 7 index. Let's use ARRAY_SIZE(handle) as the array size. KASAN report: ================================================================== BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x47bb/0x55b0 [nfit_test] Read of size 8 at addr ffffffffc10cbbe8 by task kworker/u41:0/8 ... Call Trace: dump_stack+0xea/0x1b0 ? dump_stack_print_info.cold.0+0x1b/0x1b ? kmsg_dump_rewind_nolock+0xd9/0xd9 print_address_description+0x65/0x22e ? nfit_test_ctl+0x47bb/0x55b0 [nfit_test] kasan_report.cold.6+0x92/0x1a6 nfit_test_ctl+0x47bb/0x55b0 [nfit_test] ... The buggy address belongs to the variable: dimm_fail_cmd_flags+0x28/0xffffffffffffa440 [nfit_test] ================================================================== Fixes: 39611e83a28c ("tools/testing/nvdimm: Make DSM failure code injection...") Signed-off-by: Masayoshi Mizuma Signed-off-by: Dan Williams --- tools/testing/nvdimm/test/nfit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c index 9527d47a1070..01ec04bf91b5 100644 --- a/tools/testing/nvdimm/test/nfit.c +++ b/tools/testing/nvdimm/test/nfit.c @@ -140,8 +140,8 @@ static u32 handle[] = { [6] = NFIT_DIMM_HANDLE(1, 0, 0, 0, 1), }; -static unsigned long dimm_fail_cmd_flags[NUM_DCR]; -static int dimm_fail_cmd_code[NUM_DCR]; +static unsigned long dimm_fail_cmd_flags[ARRAY_SIZE(handle)]; +static int dimm_fail_cmd_code[ARRAY_SIZE(handle)]; static const struct nd_intel_smart smart_def = { .flags = ND_INTEL_SMART_HEALTH_VALID @@ -205,7 +205,7 @@ struct nfit_test { unsigned long deadline; spinlock_t lock; } ars_state; - struct device *dimm_dev[NUM_DCR]; + struct device *dimm_dev[ARRAY_SIZE(handle)]; struct nd_intel_smart *smart; struct nd_intel_smart_threshold *smart_threshold; struct badrange badrange; @@ -2680,7 +2680,7 @@ static int nfit_test_probe(struct platform_device *pdev) u32 nfit_handle = __to_nfit_memdev(nfit_mem)->device_handle; int i; - for (i = 0; i < NUM_DCR; i++) + for (i = 0; i < ARRAY_SIZE(handle); i++) if (nfit_handle == handle[i]) dev_set_drvdata(nfit_test->dimm_dev[i], nfit_mem); From 8229706e03e4147f3e22d1de0d30630cde6d18a9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 1 Nov 2018 16:55:19 -0400 Subject: [PATCH 134/726] XArray: Fix xa_for_each with a single element at 0 The following sequence of calls would result in an infinite loop in xa_find_after(): xa_store(xa, 0, x, GFP_KERNEL); index = 0; xa_for_each(xa, entry, index, ULONG_MAX, XA_PRESENT) { } xa_find_after() was confusing the situation where we found no entry in the tree with finding a multiorder entry, so it would look for the successor entry forever. Just check for this case explicitly. Includes a few new checks in the test suite to be sure this doesn't reappear. Signed-off-by: Matthew Wilcox --- lib/test_xarray.c | 30 +++++++++++++++++++++++++++++- lib/xarray.c | 2 ++ 2 files changed, 31 insertions(+), 1 deletion(-) diff --git a/lib/test_xarray.c b/lib/test_xarray.c index aa47754150ce..126127658b49 100644 --- a/lib/test_xarray.c +++ b/lib/test_xarray.c @@ -702,7 +702,7 @@ static noinline void check_multi_find_2(struct xarray *xa) } } -static noinline void check_find(struct xarray *xa) +static noinline void check_find_1(struct xarray *xa) { unsigned long i, j, k; @@ -748,6 +748,34 @@ static noinline void check_find(struct xarray *xa) XA_BUG_ON(xa, xa_get_mark(xa, i, XA_MARK_0)); } XA_BUG_ON(xa, !xa_empty(xa)); +} + +static noinline void check_find_2(struct xarray *xa) +{ + void *entry; + unsigned long i, j, index = 0; + + xa_for_each(xa, entry, index, ULONG_MAX, XA_PRESENT) { + XA_BUG_ON(xa, true); + } + + for (i = 0; i < 1024; i++) { + xa_store_index(xa, index, GFP_KERNEL); + j = 0; + index = 0; + xa_for_each(xa, entry, index, ULONG_MAX, XA_PRESENT) { + XA_BUG_ON(xa, xa_mk_value(index) != entry); + XA_BUG_ON(xa, index != j++); + } + } + + xa_destroy(xa); +} + +static noinline void check_find(struct xarray *xa) +{ + check_find_1(xa); + check_find_2(xa); check_multi_find(xa); check_multi_find_2(xa); } diff --git a/lib/xarray.c b/lib/xarray.c index 8b176f009c08..c991ff4523ef 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1829,6 +1829,8 @@ void *xa_find_after(struct xarray *xa, unsigned long *indexp, entry = xas_find_marked(&xas, max, filter); else entry = xas_find(&xas, max); + if (xas.xa_node == XAS_BOUNDS) + break; if (xas.xa_shift) { if (xas.xa_index & ((1UL << xas.xa_shift) - 1)) continue; From 9ee5a3b7eeb190eb413e0fac3246022bd1baa05d Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 1 Nov 2018 22:52:06 -0400 Subject: [PATCH 135/726] XArray: Export __xa_foo to non-GPL modules Without this, it's not possible to use static inlines like xa_store_bh() and xa_erase_irq(). Signed-off-by: Matthew Wilcox --- lib/xarray.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/xarray.c b/lib/xarray.c index c991ff4523ef..e7be4e47c6a9 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1334,7 +1334,7 @@ void *__xa_erase(struct xarray *xa, unsigned long index) XA_STATE(xas, xa, index); return xas_result(&xas, xas_store(&xas, NULL)); } -EXPORT_SYMBOL_GPL(__xa_erase); +EXPORT_SYMBOL(__xa_erase); /** * xa_store() - Store this entry in the XArray. @@ -1674,7 +1674,7 @@ void __xa_set_mark(struct xarray *xa, unsigned long index, xa_mark_t mark) if (entry) xas_set_mark(&xas, mark); } -EXPORT_SYMBOL_GPL(__xa_set_mark); +EXPORT_SYMBOL(__xa_set_mark); /** * __xa_clear_mark() - Clear this mark on this entry while locked. @@ -1692,7 +1692,7 @@ void __xa_clear_mark(struct xarray *xa, unsigned long index, xa_mark_t mark) if (entry) xas_clear_mark(&xas, mark); } -EXPORT_SYMBOL_GPL(__xa_clear_mark); +EXPORT_SYMBOL(__xa_clear_mark); /** * xa_get_mark() - Inquire whether this mark is set on this entry. From fe2b51145c9ffd5a49013fe180e42e92ef0e6df9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 4 Dec 2017 19:33:30 -0500 Subject: [PATCH 136/726] nilfs2: Use xa_erase_irq This code simply opencoded xa_erase_irq(). Signed-off-by: Matthew Wilcox --- fs/nilfs2/btnode.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index de99db518571..f2129a5d9f23 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -266,9 +266,7 @@ void nilfs_btnode_abort_change_key(struct address_space *btnc, return; if (nbh == NULL) { /* blocksize == pagesize */ - xa_lock_irq(&btnc->i_pages); - __xa_erase(&btnc->i_pages, newkey); - xa_unlock_irq(&btnc->i_pages); + xa_erase_irq(&btnc->i_pages, newkey); unlock_page(ctxt->bh->b_page); } else brelse(nbh); From aba118389a6fb2ad7958de0f37b5869852bd38cf Mon Sep 17 00:00:00 2001 From: "Dmitry V. Levin" Date: Thu, 1 Nov 2018 14:03:08 +0300 Subject: [PATCH 137/726] uapi: fix linux/kfd_ioctl.h userspace compilation errors Consistently use types provided by via to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t' uint32_t reset_type; /usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t' uint32_t reset_cause; /usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t' uint32_t memory_lost; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t gpu_id; Fixes: 0c119abad7f0d ("drm/amd: Add kfd ioctl defines for hw_exception event") Cc: # v4.19 Signed-off-by: Dmitry V. Levin Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- include/uapi/linux/kfd_ioctl.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index f5ff8a76e208..dae897f38e59 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -255,10 +255,10 @@ struct kfd_hsa_memory_exception_data { /* hw exception data */ struct kfd_hsa_hw_exception_data { - uint32_t reset_type; - uint32_t reset_cause; - uint32_t memory_lost; - uint32_t gpu_id; + __u32 reset_type; + __u32 reset_cause; + __u32 memory_lost; + __u32 gpu_id; }; /* Event data */ From 8e7f91719db36440d63de37331367be9700ca0c7 Mon Sep 17 00:00:00 2001 From: "Dmitry V. Levin" Date: Thu, 1 Nov 2018 14:03:28 +0300 Subject: [PATCH 138/726] uapi: fix more linux/kfd_ioctl.h userspace compilation errors Consistently use types provided by via to fix struct kfd_ioctl_get_queue_wave_state_args userspace compilation errors. Fixes: 5df099e8bc83f ("drm/amdkfd: Add wavefront context save state retrieval ioctl") Signed-off-by: Dmitry V. Levin Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- include/uapi/linux/kfd_ioctl.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index dae897f38e59..b01eb502d49c 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -83,11 +83,11 @@ struct kfd_ioctl_set_cu_mask_args { }; struct kfd_ioctl_get_queue_wave_state_args { - uint64_t ctl_stack_address; /* to KFD */ - uint32_t ctl_stack_used_size; /* from KFD */ - uint32_t save_area_used_size; /* from KFD */ - uint32_t queue_id; /* to KFD */ - uint32_t pad; + __u64 ctl_stack_address; /* to KFD */ + __u32 ctl_stack_used_size; /* from KFD */ + __u32 save_area_used_size; /* from KFD */ + __u32 queue_id; /* to KFD */ + __u32 pad; }; /* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */ From 6915ed86cca6a0b422e8ada05ec7009d2074b88a Mon Sep 17 00:00:00 2001 From: Jeff Barnhill <0xeffeff@gmail.com> Date: Mon, 5 Nov 2018 20:36:45 +0000 Subject: [PATCH 139/726] net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS Move the anycast.c init and cleanup functions which were inadvertently added inside the CONFIG_PROC_FS definition. Fixes: 2384d02520ff ("net/ipv6: Add anycast addresses to a global hashtable") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller --- net/ipv6/anycast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c index 7698637cf827..94999058e110 100644 --- a/net/ipv6/anycast.c +++ b/net/ipv6/anycast.c @@ -590,6 +590,7 @@ void ac6_proc_exit(struct net *net) { remove_proc_entry("anycast6", net->proc_net); } +#endif /* Init / cleanup code */ @@ -611,4 +612,3 @@ void ipv6_anycast_cleanup(void) WARN_ON(!hlist_empty(&inet6_acaddr_lst[i])); spin_unlock(&acaddr_hash_lock); } -#endif From 4c0608f4a0e76dfb82d3accd20081f4bf47ed143 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 30 Oct 2018 09:45:55 -0400 Subject: [PATCH 140/726] XArray: Regularise xa_reserve The xa_reserve() function was a little unusual in that it attempted to be callable for all kinds of locking scenarios. Make it look like the other APIs with __xa_reserve, xa_reserve_bh and xa_reserve_irq variants. Signed-off-by: Matthew Wilcox --- Documentation/core-api/xarray.rst | 13 +++++ include/linux/xarray.h | 80 ++++++++++++++++++++++++++++++- lib/test_xarray.c | 6 +++ lib/xarray.c | 18 +++---- 4 files changed, 105 insertions(+), 12 deletions(-) diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index a4e705108f42..65c77a81b689 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -105,6 +105,15 @@ may result in the entry being marked at some, but not all of the other indices. Storing into one index may result in the entry retrieved by some, but not all of the other indices changing. +Sometimes you need to ensure that a subsequent call to :c:func:`xa_store` +will not need to allocate memory. The :c:func:`xa_reserve` function +will store a reserved entry at the indicated index. Users of the normal +API will see this entry as containing ``NULL``. If you do not need to +use the reserved entry, you can call :c:func:`xa_release` to remove the +unused entry. If another user has stored to the entry in the meantime, +:c:func:`xa_release` will do nothing; if instead you want the entry to +become ``NULL``, you should use :c:func:`xa_erase`. + Finally, you can remove all entries from an XArray by calling :c:func:`xa_destroy`. If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present @@ -167,6 +176,9 @@ Takes xa_lock internally: * :c:func:`xa_alloc` * :c:func:`xa_alloc_bh` * :c:func:`xa_alloc_irq` + * :c:func:`xa_reserve` + * :c:func:`xa_reserve_bh` + * :c:func:`xa_reserve_irq` * :c:func:`xa_destroy` * :c:func:`xa_set_mark` * :c:func:`xa_clear_mark` @@ -177,6 +189,7 @@ Assumes xa_lock held on entry: * :c:func:`__xa_erase` * :c:func:`__xa_cmpxchg` * :c:func:`__xa_alloc` + * :c:func:`__xa_reserve` * :c:func:`__xa_set_mark` * :c:func:`__xa_clear_mark` diff --git a/include/linux/xarray.h b/include/linux/xarray.h index d9514928ddac..c2cb0426c60c 100644 --- a/include/linux/xarray.h +++ b/include/linux/xarray.h @@ -291,7 +291,6 @@ void *xa_load(struct xarray *, unsigned long index); void *xa_store(struct xarray *, unsigned long index, void *entry, gfp_t); void *xa_cmpxchg(struct xarray *, unsigned long index, void *old, void *entry, gfp_t); -int xa_reserve(struct xarray *, unsigned long index, gfp_t); void *xa_store_range(struct xarray *, unsigned long first, unsigned long last, void *entry, gfp_t); bool xa_get_mark(struct xarray *, unsigned long index, xa_mark_t); @@ -455,6 +454,7 @@ void *__xa_store(struct xarray *, unsigned long index, void *entry, gfp_t); void *__xa_cmpxchg(struct xarray *, unsigned long index, void *old, void *entry, gfp_t); int __xa_alloc(struct xarray *, u32 *id, u32 max, void *entry, gfp_t); +int __xa_reserve(struct xarray *, unsigned long index, gfp_t); void __xa_set_mark(struct xarray *, unsigned long index, xa_mark_t); void __xa_clear_mark(struct xarray *, unsigned long index, xa_mark_t); @@ -621,6 +621,84 @@ static inline int xa_alloc_irq(struct xarray *xa, u32 *id, u32 max, void *entry, return err; } +/** + * xa_reserve() - Reserve this index in the XArray. + * @xa: XArray. + * @index: Index into array. + * @gfp: Memory allocation flags. + * + * Ensures there is somewhere to store an entry at @index in the array. + * If there is already something stored at @index, this function does + * nothing. If there was nothing there, the entry is marked as reserved. + * Loading from a reserved entry returns a %NULL pointer. + * + * If you do not use the entry that you have reserved, call xa_release() + * or xa_erase() to free any unnecessary memory. + * + * Context: Any context. Takes and releases the xa_lock. + * May sleep if the @gfp flags permit. + * Return: 0 if the reservation succeeded or -ENOMEM if it failed. + */ +static inline +int xa_reserve(struct xarray *xa, unsigned long index, gfp_t gfp) +{ + int ret; + + xa_lock(xa); + ret = __xa_reserve(xa, index, gfp); + xa_unlock(xa); + + return ret; +} + +/** + * xa_reserve_bh() - Reserve this index in the XArray. + * @xa: XArray. + * @index: Index into array. + * @gfp: Memory allocation flags. + * + * A softirq-disabling version of xa_reserve(). + * + * Context: Any context. Takes and releases the xa_lock while + * disabling softirqs. + * Return: 0 if the reservation succeeded or -ENOMEM if it failed. + */ +static inline +int xa_reserve_bh(struct xarray *xa, unsigned long index, gfp_t gfp) +{ + int ret; + + xa_lock_bh(xa); + ret = __xa_reserve(xa, index, gfp); + xa_unlock_bh(xa); + + return ret; +} + +/** + * xa_reserve_irq() - Reserve this index in the XArray. + * @xa: XArray. + * @index: Index into array. + * @gfp: Memory allocation flags. + * + * An interrupt-disabling version of xa_reserve(). + * + * Context: Process context. Takes and releases the xa_lock while + * disabling interrupts. + * Return: 0 if the reservation succeeded or -ENOMEM if it failed. + */ +static inline +int xa_reserve_irq(struct xarray *xa, unsigned long index, gfp_t gfp) +{ + int ret; + + xa_lock_irq(xa); + ret = __xa_reserve(xa, index, gfp); + xa_unlock_irq(xa); + + return ret; +} + /* Everything below here is the Advanced API. Proceed with caution. */ /* diff --git a/lib/test_xarray.c b/lib/test_xarray.c index 126127658b49..e5294b20b52f 100644 --- a/lib/test_xarray.c +++ b/lib/test_xarray.c @@ -373,6 +373,12 @@ static noinline void check_reserve(struct xarray *xa) xa_erase_index(xa, 12345678); XA_BUG_ON(xa, !xa_empty(xa)); + /* And so does xa_insert */ + xa_reserve(xa, 12345678, GFP_KERNEL); + XA_BUG_ON(xa, xa_insert(xa, 12345678, xa_mk_value(12345678), 0) != 0); + xa_erase_index(xa, 12345678); + XA_BUG_ON(xa, !xa_empty(xa)); + /* Can iterate through a reserved entry */ xa_store_index(xa, 5, GFP_KERNEL); xa_reserve(xa, 6, GFP_KERNEL); diff --git a/lib/xarray.c b/lib/xarray.c index e7be4e47c6a9..9cab8cfef8a8 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1488,7 +1488,7 @@ void *__xa_cmpxchg(struct xarray *xa, unsigned long index, EXPORT_SYMBOL(__xa_cmpxchg); /** - * xa_reserve() - Reserve this index in the XArray. + * __xa_reserve() - Reserve this index in the XArray. * @xa: XArray. * @index: Index into array. * @gfp: Memory allocation flags. @@ -1496,33 +1496,29 @@ EXPORT_SYMBOL(__xa_cmpxchg); * Ensures there is somewhere to store an entry at @index in the array. * If there is already something stored at @index, this function does * nothing. If there was nothing there, the entry is marked as reserved. - * Loads from @index will continue to see a %NULL pointer until a - * subsequent store to @index. + * Loading from a reserved entry returns a %NULL pointer. * * If you do not use the entry that you have reserved, call xa_release() * or xa_erase() to free any unnecessary memory. * - * Context: Process context. Takes and releases the xa_lock, IRQ or BH safe - * if specified in XArray flags. May sleep if the @gfp flags permit. + * Context: Any context. Expects the xa_lock to be held on entry. May + * release the lock, sleep and reacquire the lock if the @gfp flags permit. * Return: 0 if the reservation succeeded or -ENOMEM if it failed. */ -int xa_reserve(struct xarray *xa, unsigned long index, gfp_t gfp) +int __xa_reserve(struct xarray *xa, unsigned long index, gfp_t gfp) { XA_STATE(xas, xa, index); - unsigned int lock_type = xa_lock_type(xa); void *curr; do { - xas_lock_type(&xas, lock_type); curr = xas_load(&xas); if (!curr) xas_store(&xas, XA_ZERO_ENTRY); - xas_unlock_type(&xas, lock_type); - } while (xas_nomem(&xas, gfp)); + } while (__xas_nomem(&xas, gfp)); return xas_error(&xas); } -EXPORT_SYMBOL(xa_reserve); +EXPORT_SYMBOL(__xa_reserve); #ifdef CONFIG_XARRAY_MULTI static void xas_set_range(struct xa_state *xas, unsigned long first, From c5beb07e7a06b24f4f27304f6282b5dbd929543b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 31 Oct 2018 14:39:28 -0400 Subject: [PATCH 141/726] XArray: Unify xa_cmpxchg and __xa_cmpxchg xa_cmpxchg() was one of the largest functions in the xarray implementation. By turning it into a wrapper and having the callers take the lock (like several other functions), we save 160 bytes on a tinyconfig build and reduce the duplication in xarray.c. Signed-off-by: Matthew Wilcox --- include/linux/xarray.h | 113 +++++++++++++++++++++++++---------------- lib/xarray.c | 41 --------------- 2 files changed, 69 insertions(+), 85 deletions(-) diff --git a/include/linux/xarray.h b/include/linux/xarray.h index c2cb0426c60c..8e59d4fbd55e 100644 --- a/include/linux/xarray.h +++ b/include/linux/xarray.h @@ -289,8 +289,6 @@ struct xarray { void xa_init_flags(struct xarray *, gfp_t flags); void *xa_load(struct xarray *, unsigned long index); void *xa_store(struct xarray *, unsigned long index, void *entry, gfp_t); -void *xa_cmpxchg(struct xarray *, unsigned long index, - void *old, void *entry, gfp_t); void *xa_store_range(struct xarray *, unsigned long first, unsigned long last, void *entry, gfp_t); bool xa_get_mark(struct xarray *, unsigned long index, xa_mark_t); @@ -359,48 +357,6 @@ static inline void *xa_erase(struct xarray *xa, unsigned long index) return xa_store(xa, index, NULL, 0); } -/** - * xa_insert() - Store this entry in the XArray unless another entry is - * already present. - * @xa: XArray. - * @index: Index into array. - * @entry: New entry. - * @gfp: Memory allocation flags. - * - * If you would rather see the existing entry in the array, use xa_cmpxchg(). - * This function is for users who don't care what the entry is, only that - * one is present. - * - * Context: Process context. Takes and releases the xa_lock. - * May sleep if the @gfp flags permit. - * Return: 0 if the store succeeded. -EEXIST if another entry was present. - * -ENOMEM if memory could not be allocated. - */ -static inline int xa_insert(struct xarray *xa, unsigned long index, - void *entry, gfp_t gfp) -{ - void *curr = xa_cmpxchg(xa, index, NULL, entry, gfp); - if (!curr) - return 0; - if (xa_is_err(curr)) - return xa_err(curr); - return -EEXIST; -} - -/** - * xa_release() - Release a reserved entry. - * @xa: XArray. - * @index: Index of entry. - * - * After calling xa_reserve(), you can call this function to release the - * reservation. If the entry at @index has been stored to, this function - * will do nothing. - */ -static inline void xa_release(struct xarray *xa, unsigned long index) -{ - xa_cmpxchg(xa, index, NULL, NULL, 0); -} - /** * xa_for_each() - Iterate over a portion of an XArray. * @xa: XArray. @@ -534,6 +490,61 @@ static inline void *xa_erase_irq(struct xarray *xa, unsigned long index) return entry; } +/** + * xa_cmpxchg() - Conditionally replace an entry in the XArray. + * @xa: XArray. + * @index: Index into array. + * @old: Old value to test against. + * @entry: New value to place in array. + * @gfp: Memory allocation flags. + * + * If the entry at @index is the same as @old, replace it with @entry. + * If the return value is equal to @old, then the exchange was successful. + * + * Context: Any context. Takes and releases the xa_lock. May sleep + * if the @gfp flags permit. + * Return: The old value at this index or xa_err() if an error happened. + */ +static inline void *xa_cmpxchg(struct xarray *xa, unsigned long index, + void *old, void *entry, gfp_t gfp) +{ + void *curr; + + xa_lock(xa); + curr = __xa_cmpxchg(xa, index, old, entry, gfp); + xa_unlock(xa); + + return curr; +} + +/** + * xa_insert() - Store this entry in the XArray unless another entry is + * already present. + * @xa: XArray. + * @index: Index into array. + * @entry: New entry. + * @gfp: Memory allocation flags. + * + * If you would rather see the existing entry in the array, use xa_cmpxchg(). + * This function is for users who don't care what the entry is, only that + * one is present. + * + * Context: Process context. Takes and releases the xa_lock. + * May sleep if the @gfp flags permit. + * Return: 0 if the store succeeded. -EEXIST if another entry was present. + * -ENOMEM if memory could not be allocated. + */ +static inline int xa_insert(struct xarray *xa, unsigned long index, + void *entry, gfp_t gfp) +{ + void *curr = xa_cmpxchg(xa, index, NULL, entry, gfp); + if (!curr) + return 0; + if (xa_is_err(curr)) + return xa_err(curr); + return -EEXIST; +} + /** * xa_alloc() - Find somewhere to store this entry in the XArray. * @xa: XArray. @@ -699,6 +710,20 @@ int xa_reserve_irq(struct xarray *xa, unsigned long index, gfp_t gfp) return ret; } +/** + * xa_release() - Release a reserved entry. + * @xa: XArray. + * @index: Index of entry. + * + * After calling xa_reserve(), you can call this function to release the + * reservation. If the entry at @index has been stored to, this function + * will do nothing. + */ +static inline void xa_release(struct xarray *xa, unsigned long index) +{ + xa_cmpxchg(xa, index, NULL, NULL, 0); +} + /* Everything below here is the Advanced API. Proceed with caution. */ /* diff --git a/lib/xarray.c b/lib/xarray.c index 9cab8cfef8a8..77671d4a7910 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1406,47 +1406,6 @@ void *__xa_store(struct xarray *xa, unsigned long index, void *entry, gfp_t gfp) } EXPORT_SYMBOL(__xa_store); -/** - * xa_cmpxchg() - Conditionally replace an entry in the XArray. - * @xa: XArray. - * @index: Index into array. - * @old: Old value to test against. - * @entry: New value to place in array. - * @gfp: Memory allocation flags. - * - * If the entry at @index is the same as @old, replace it with @entry. - * If the return value is equal to @old, then the exchange was successful. - * - * Context: Process context. Takes and releases the xa_lock. May sleep - * if the @gfp flags permit. - * Return: The old value at this index or xa_err() if an error happened. - */ -void *xa_cmpxchg(struct xarray *xa, unsigned long index, - void *old, void *entry, gfp_t gfp) -{ - XA_STATE(xas, xa, index); - void *curr; - - if (WARN_ON_ONCE(xa_is_internal(entry))) - return XA_ERROR(-EINVAL); - - do { - xas_lock(&xas); - curr = xas_load(&xas); - if (curr == XA_ZERO_ENTRY) - curr = NULL; - if (curr == old) { - xas_store(&xas, entry); - if (xa_track_free(xa) && entry) - xas_clear_mark(&xas, XA_FREE_MARK); - } - xas_unlock(&xas); - } while (xas_nomem(&xas, gfp)); - - return xas_result(&xas, curr); -} -EXPORT_SYMBOL(xa_cmpxchg); - /** * __xa_cmpxchg() - Store this entry in the XArray. * @xa: XArray. From 9c16bb88905456a9b1299338041f05fa7699971b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 15:48:49 -0500 Subject: [PATCH 142/726] XArray: Turn xa_erase into an exported function Make xa_erase() take the spinlock and then call __xa_erase(), but make it out of line since it's such a common function. Signed-off-by: Matthew Wilcox --- include/linux/xarray.h | 18 +----------------- lib/xarray.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+), 17 deletions(-) diff --git a/include/linux/xarray.h b/include/linux/xarray.h index 8e59d4fbd55e..4c839c17a99b 100644 --- a/include/linux/xarray.h +++ b/include/linux/xarray.h @@ -289,6 +289,7 @@ struct xarray { void xa_init_flags(struct xarray *, gfp_t flags); void *xa_load(struct xarray *, unsigned long index); void *xa_store(struct xarray *, unsigned long index, void *entry, gfp_t); +void *xa_erase(struct xarray *, unsigned long index); void *xa_store_range(struct xarray *, unsigned long first, unsigned long last, void *entry, gfp_t); bool xa_get_mark(struct xarray *, unsigned long index, xa_mark_t); @@ -340,23 +341,6 @@ static inline bool xa_marked(const struct xarray *xa, xa_mark_t mark) return xa->xa_flags & XA_FLAGS_MARK(mark); } -/** - * xa_erase() - Erase this entry from the XArray. - * @xa: XArray. - * @index: Index of entry. - * - * This function is the equivalent of calling xa_store() with %NULL as - * the third argument. The XArray does not need to allocate memory, so - * the user does not need to provide GFP flags. - * - * Context: Process context. Takes and releases the xa_lock. - * Return: The entry which used to be at this index. - */ -static inline void *xa_erase(struct xarray *xa, unsigned long index) -{ - return xa_store(xa, index, NULL, 0); -} - /** * xa_for_each() - Iterate over a portion of an XArray. * @xa: XArray. diff --git a/lib/xarray.c b/lib/xarray.c index 77671d4a7910..b55aa8c1c20f 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1336,6 +1336,30 @@ void *__xa_erase(struct xarray *xa, unsigned long index) } EXPORT_SYMBOL(__xa_erase); +/** + * xa_erase() - Erase this entry from the XArray. + * @xa: XArray. + * @index: Index of entry. + * + * This function is the equivalent of calling xa_store() with %NULL as + * the third argument. The XArray does not need to allocate memory, so + * the user does not need to provide GFP flags. + * + * Context: Any context. Takes and releases the xa_lock. + * Return: The entry which used to be at this index. + */ +void *xa_erase(struct xarray *xa, unsigned long index) +{ + void *entry; + + xa_lock(xa); + entry = __xa_erase(xa, index); + xa_unlock(xa); + + return entry; +} +EXPORT_SYMBOL(xa_erase); + /** * xa_store() - Store this entry in the XArray. * @xa: XArray. From 84e5acb76dacb8ebd648a86a53907ce0dd616534 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 26 Oct 2018 14:41:29 -0400 Subject: [PATCH 143/726] XArray: Add xa_store_bh() and xa_store_irq() These convenience wrappers disable interrupts while taking the spinlock. A number of drivers would otherwise have to open-code these functions. Signed-off-by: Matthew Wilcox --- Documentation/core-api/xarray.rst | 5 ++- include/linux/xarray.h | 52 +++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 1 deletion(-) diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index 65c77a81b689..8a6e2087de77 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -167,6 +167,8 @@ Takes RCU read lock: Takes xa_lock internally: * :c:func:`xa_store` + * :c:func:`xa_store_bh` + * :c:func:`xa_store_irq` * :c:func:`xa_insert` * :c:func:`xa_erase` * :c:func:`xa_erase_bh` @@ -247,7 +249,8 @@ Sharing the XArray with interrupt context is also possible, either using :c:func:`xa_lock_irqsave` in both the interrupt handler and process context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock` in the interrupt handler. Some of the more common patterns have helper -functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`. +functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`, +:c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`. Sometimes you need to protect access to the XArray with a mutex because that lock sits above another mutex in the locking hierarchy. That does diff --git a/include/linux/xarray.h b/include/linux/xarray.h index 4c839c17a99b..52d9732e4ec4 100644 --- a/include/linux/xarray.h +++ b/include/linux/xarray.h @@ -426,6 +426,58 @@ static inline int __xa_insert(struct xarray *xa, unsigned long index, return -EEXIST; } +/** + * xa_store_bh() - Store this entry in the XArray. + * @xa: XArray. + * @index: Index into array. + * @entry: New entry. + * @gfp: Memory allocation flags. + * + * This function is like calling xa_store() except it disables softirqs + * while holding the array lock. + * + * Context: Any context. Takes and releases the xa_lock while + * disabling softirqs. + * Return: The entry which used to be at this index. + */ +static inline void *xa_store_bh(struct xarray *xa, unsigned long index, + void *entry, gfp_t gfp) +{ + void *curr; + + xa_lock_bh(xa); + curr = __xa_store(xa, index, entry, gfp); + xa_unlock_bh(xa); + + return curr; +} + +/** + * xa_store_irq() - Erase this entry from the XArray. + * @xa: XArray. + * @index: Index into array. + * @entry: New entry. + * @gfp: Memory allocation flags. + * + * This function is like calling xa_store() except it disables interrupts + * while holding the array lock. + * + * Context: Process context. Takes and releases the xa_lock while + * disabling interrupts. + * Return: The entry which used to be at this index. + */ +static inline void *xa_store_irq(struct xarray *xa, unsigned long index, + void *entry, gfp_t gfp) +{ + void *curr; + + xa_lock_irq(xa); + curr = __xa_store(xa, index, entry, gfp); + xa_unlock_irq(xa); + + return curr; +} + /** * xa_erase_bh() - Erase this entry from the XArray. * @xa: XArray. From 611f318637daa5710a1d7a0e7dc6cda23914094a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 15:56:17 -0500 Subject: [PATCH 144/726] XArray: Unify xa_store and __xa_store Saves around 115 bytes on a tinyconfig build and reduces the amount of code duplication in the XArray implementation. Signed-off-by: Matthew Wilcox --- lib/xarray.c | 66 +++++++++++++++++++++++----------------------------- 1 file changed, 29 insertions(+), 37 deletions(-) diff --git a/lib/xarray.c b/lib/xarray.c index b55aa8c1c20f..a9d28013f9dc 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1360,43 +1360,6 @@ void *xa_erase(struct xarray *xa, unsigned long index) } EXPORT_SYMBOL(xa_erase); -/** - * xa_store() - Store this entry in the XArray. - * @xa: XArray. - * @index: Index into array. - * @entry: New entry. - * @gfp: Memory allocation flags. - * - * After this function returns, loads from this index will return @entry. - * Storing into an existing multislot entry updates the entry of every index. - * The marks associated with @index are unaffected unless @entry is %NULL. - * - * Context: Process context. Takes and releases the xa_lock. May sleep - * if the @gfp flags permit. - * Return: The old entry at this index on success, xa_err(-EINVAL) if @entry - * cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation - * failed. - */ -void *xa_store(struct xarray *xa, unsigned long index, void *entry, gfp_t gfp) -{ - XA_STATE(xas, xa, index); - void *curr; - - if (WARN_ON_ONCE(xa_is_internal(entry))) - return XA_ERROR(-EINVAL); - - do { - xas_lock(&xas); - curr = xas_store(&xas, entry); - if (xa_track_free(xa) && entry) - xas_clear_mark(&xas, XA_FREE_MARK); - xas_unlock(&xas); - } while (xas_nomem(&xas, gfp)); - - return xas_result(&xas, curr); -} -EXPORT_SYMBOL(xa_store); - /** * __xa_store() - Store this entry in the XArray. * @xa: XArray. @@ -1430,6 +1393,35 @@ void *__xa_store(struct xarray *xa, unsigned long index, void *entry, gfp_t gfp) } EXPORT_SYMBOL(__xa_store); +/** + * xa_store() - Store this entry in the XArray. + * @xa: XArray. + * @index: Index into array. + * @entry: New entry. + * @gfp: Memory allocation flags. + * + * After this function returns, loads from this index will return @entry. + * Storing into an existing multislot entry updates the entry of every index. + * The marks associated with @index are unaffected unless @entry is %NULL. + * + * Context: Any context. Takes and releases the xa_lock. + * May sleep if the @gfp flags permit. + * Return: The old entry at this index on success, xa_err(-EINVAL) if @entry + * cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation + * failed. + */ +void *xa_store(struct xarray *xa, unsigned long index, void *entry, gfp_t gfp) +{ + void *curr; + + xa_lock(xa); + curr = __xa_store(xa, index, entry, gfp); + xa_unlock(xa); + + return curr; +} +EXPORT_SYMBOL(xa_store); + /** * __xa_cmpxchg() - Store this entry in the XArray. * @xa: XArray. From d9c480435add8257f9069941f0e6196647f6d746 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 16:15:56 -0500 Subject: [PATCH 145/726] XArray: Handle NULL pointers differently for allocation For allocating XArrays, it makes sense to distinguish beteen erasing an entry and storing NULL. Storing NULL keeps the index allocated with a NULL pointer associated with it while xa_erase() frees the index. Some existing IDR users rely on this ability. Signed-off-by: Matthew Wilcox --- Documentation/core-api/xarray.rst | 28 +++++++++++++++++++--------- lib/xarray.c | 13 ++++++++++--- 2 files changed, 29 insertions(+), 12 deletions(-) diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index 8a6e2087de77..616ac406bf86 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -119,18 +119,27 @@ Finally, you can remove all entries from an XArray by calling to free the entries first. You can do this by iterating over all present entries in the XArray using the :c:func:`xa_for_each` iterator. -ID assignment -------------- +Allocating XArrays +------------------ + +If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or +initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +the XArray changes to track whether entries are in use or not. You can call :c:func:`xa_alloc` to store the entry at any unused index in the XArray. If you need to modify the array from interrupt context, you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable -interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating -a ``NULL`` pointer does not delete an entry. Instead it reserves an -entry like :c:func:`xa_reserve` and you can release it using either -:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the -XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised -by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +interrupts while allocating the ID. + +Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert` +will mark the entry as being allocated. Unlike a normal XArray, storing +``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`. +To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if +you only want to free the entry if it's ``NULL``). + +You cannot use ``XA_MARK_0`` with an allocating XArray as this mark +is used to track whether an entry is free or not. The other marks are +available for your use. Memory allocation ----------------- @@ -338,7 +347,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``. - :c:func:`xa_is_zero` - Zero entries appear as ``NULL`` through the Normal API, but occupy an entry in the XArray which can be used to reserve the index for - future use. + future use. This is used by allocating XArrays for allocated entries + which are ``NULL``. Other internal entries may be added in the future. As far as possible, they will be handled by :c:func:`xas_retry`. diff --git a/lib/xarray.c b/lib/xarray.c index a9d28013f9dc..c3e2084aa313 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1382,10 +1382,12 @@ void *__xa_store(struct xarray *xa, unsigned long index, void *entry, gfp_t gfp) if (WARN_ON_ONCE(xa_is_internal(entry))) return XA_ERROR(-EINVAL); + if (xa_track_free(xa) && !entry) + entry = XA_ZERO_ENTRY; do { curr = xas_store(&xas, entry); - if (xa_track_free(xa) && entry) + if (xa_track_free(xa)) xas_clear_mark(&xas, XA_FREE_MARK); } while (__xas_nomem(&xas, gfp)); @@ -1446,6 +1448,8 @@ void *__xa_cmpxchg(struct xarray *xa, unsigned long index, if (WARN_ON_ONCE(xa_is_internal(entry))) return XA_ERROR(-EINVAL); + if (xa_track_free(xa) && !entry) + entry = XA_ZERO_ENTRY; do { curr = xas_load(&xas); @@ -1453,7 +1457,7 @@ void *__xa_cmpxchg(struct xarray *xa, unsigned long index, curr = NULL; if (curr == old) { xas_store(&xas, entry); - if (xa_track_free(xa) && entry) + if (xa_track_free(xa)) xas_clear_mark(&xas, XA_FREE_MARK); } } while (__xas_nomem(&xas, gfp)); @@ -1487,8 +1491,11 @@ int __xa_reserve(struct xarray *xa, unsigned long index, gfp_t gfp) do { curr = xas_load(&xas); - if (!curr) + if (!curr) { xas_store(&xas, XA_ZERO_ENTRY); + if (xa_track_free(xa)) + xas_clear_mark(&xas, XA_FREE_MARK); + } } while (__xas_nomem(&xas, gfp)); return xas_error(&xas); From 804dfaf01bcc9daa4298c608ba9018abf616ec48 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 16:37:15 -0500 Subject: [PATCH 146/726] XArray: Fix Documentation Minor fixes. Signed-off-by: Matthew Wilcox --- Documentation/core-api/xarray.rst | 6 +++++- include/linux/xarray.h | 4 ++-- lib/xarray.c | 10 +++++----- 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index 616ac406bf86..dbe96cb5558e 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -74,7 +74,8 @@ using :c:func:`xa_load`. xa_store will overwrite any entry with the new entry and return the previous entry stored at that index. You can use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a ``NULL`` entry. There is no difference between an entry that has never -been stored to and one that has most recently had ``NULL`` stored to it. +been stored to, one that has been erased and one that has most recently +had ``NULL`` stored to it. You can conditionally replace an entry at an index by using :c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if @@ -114,6 +115,9 @@ unused entry. If another user has stored to the entry in the meantime, :c:func:`xa_release` will do nothing; if instead you want the entry to become ``NULL``, you should use :c:func:`xa_erase`. +If all entries in the array are ``NULL``, the :c:func:`xa_empty` function +will return ``true``. + Finally, you can remove all entries from an XArray by calling :c:func:`xa_destroy`. If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present diff --git a/include/linux/xarray.h b/include/linux/xarray.h index 52d9732e4ec4..564892e19f8c 100644 --- a/include/linux/xarray.h +++ b/include/linux/xarray.h @@ -487,7 +487,7 @@ static inline void *xa_store_irq(struct xarray *xa, unsigned long index, * the third argument. The XArray does not need to allocate memory, so * the user does not need to provide GFP flags. * - * Context: Process context. Takes and releases the xa_lock while + * Context: Any context. Takes and releases the xa_lock while * disabling softirqs. * Return: The entry which used to be at this index. */ @@ -622,7 +622,7 @@ static inline int xa_alloc(struct xarray *xa, u32 *id, u32 max, void *entry, * Updates the @id pointer with the index, then stores the entry at that * index. A concurrent lookup will not see an uninitialised @id. * - * Context: Process context. Takes and releases the xa_lock while + * Context: Any context. Takes and releases the xa_lock while * disabling softirqs. May sleep if the @gfp flags permit. * Return: 0 on success, -ENOMEM if memory allocation fails or -ENOSPC if * there is no more space in the XArray. diff --git a/lib/xarray.c b/lib/xarray.c index c3e2084aa313..7946380cd6c9 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -610,8 +610,8 @@ static int xas_expand(struct xa_state *xas, void *head) * (see the xa_cmpxchg() implementation for an example). * * Return: If the slot already existed, returns the contents of this slot. - * If the slot was newly created, returns NULL. If it failed to create the - * slot, returns NULL and indicates the error in @xas. + * If the slot was newly created, returns %NULL. If it failed to create the + * slot, returns %NULL and indicates the error in @xas. */ static void *xas_create(struct xa_state *xas) { @@ -1640,7 +1640,7 @@ EXPORT_SYMBOL(__xa_alloc); * @index: Index of entry. * @mark: Mark number. * - * Attempting to set a mark on a NULL entry does not succeed. + * Attempting to set a mark on a %NULL entry does not succeed. * * Context: Any context. Expects xa_lock to be held on entry. */ @@ -1710,7 +1710,7 @@ EXPORT_SYMBOL(xa_get_mark); * @index: Index of entry. * @mark: Mark number. * - * Attempting to set a mark on a NULL entry does not succeed. + * Attempting to set a mark on a %NULL entry does not succeed. * * Context: Process context. Takes and releases the xa_lock. */ @@ -1879,7 +1879,7 @@ static unsigned int xas_extract_marked(struct xa_state *xas, void **dst, * * The @filter may be an XArray mark value, in which case entries which are * marked with that mark will be copied. It may also be %XA_PRESENT, in - * which case all entries which are not NULL will be copied. + * which case all entries which are not %NULL will be copied. * * The entries returned may not represent a snapshot of the XArray at a * moment in time. For example, if another thread stores to index 5, then From 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 4 Nov 2018 01:46:00 -0700 Subject: [PATCH 147/726] xtensa: make sure bFLT stack is 16 byte aligned Xtensa ABI requires stack alignment to be at least 16. In noMMU configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at least 16. This fixes the following runtime error in noMMU configuration, caused by interaction between insufficiently aligned stack and alloca function, that results in corruption of on-stack variable in the libc function glob: Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65) - should not happen EXCCAUSE is 15 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov --- arch/xtensa/include/asm/processor.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index e4ccb88b7996..677bc76c1d70 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -23,7 +23,11 @@ # error Linux requires the Xtensa Windowed Registers Option. #endif -#define ARCH_SLAB_MINALIGN XCHAL_DATA_WIDTH +/* Xtensa ABI requires stack alignment to be at least 16 */ + +#define STACK_ALIGN (XCHAL_DATA_WIDTH > 16 ? XCHAL_DATA_WIDTH : 16) + +#define ARCH_SLAB_MINALIGN STACK_ALIGN /* * User space process size: 1 GB. From 91d7b67000c6e9bd605624079fee5a084238ad92 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 16 Oct 2018 09:13:46 +0200 Subject: [PATCH 148/726] mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute() We return 0 unconditionally in 'cqspi_direct_read_execute()'. However, 'ret' is set to some error codes in several error handling paths. Return 'ret' instead to propagate the error code. Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads") Cc: Signed-off-by: Christophe JAILLET Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/cadence-quadspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index e24db817154e..d846428ef038 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -996,7 +996,7 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, err_unmap: dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE); - return 0; + return ret; } static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, From 90c31cb9a8115a1183daed9a714eea4be0687931 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 19 Oct 2018 11:02:22 +0200 Subject: [PATCH 149/726] mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed Commit 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories") removed the 'nor->addr_width = 0;' statement when spi_nor_parse_sfdp() returns an error, thus leaving ->addr_width in an undefined state which can cause trouble when spi_nor_scan() checks its value. Reported-by: Cyrille Pitchen Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories") Signed-off-by: Boris Brezillon Reviewed-by: Tudor Ambarus --- drivers/mtd/spi-nor/spi-nor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 9407ca5f9443..3e54e31889c7 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -3250,12 +3250,14 @@ static int spi_nor_init_params(struct spi_nor *nor, memcpy(&sfdp_params, params, sizeof(sfdp_params)); memcpy(&prev_map, &nor->erase_map, sizeof(prev_map)); - if (spi_nor_parse_sfdp(nor, &sfdp_params)) + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; /* restore previous erase map */ memcpy(&nor->erase_map, &prev_map, sizeof(nor->erase_map)); - else + } else { memcpy(params, &sfdp_params, sizeof(*params)); + } } return 0; From 5e1acb4afacc6229946c3d2b7ffc422b53fb2448 Mon Sep 17 00:00:00 2001 From: Alexey Kodanev Date: Fri, 2 Nov 2018 19:11:04 +0300 Subject: [PATCH 150/726] rtnetlink: restore handling of dumpit return value in rtnl_dump_all() For non-zero return from dumpit() we should break the loop in rtnl_dump_all() and return the result. Otherwise, e.g., we could get the memory leak in inet6_dump_fib() [1]. The pointer to the allocated struct fib6_walker there (saved in cb->args) can be lost, reset on the next iteration. Fix it by partially restoring the previous behavior before commit c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function"). The returned error from dumpit() is still passed further. [1]: unreferenced object 0xffff88001322a200 (size 96): comm "sshd", pid 1484, jiffies 4296032768 (age 1432.542s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 18 09 41 36 00 88 ff ff 18 09 41 36 00 88 ff ff ..A6......A6.... backtrace: [<0000000095846b39>] kmem_cache_alloc_trace+0x151/0x220 [<000000007d12709f>] inet6_dump_fib+0x68d/0x940 [<000000002775a316>] rtnl_dump_all+0x1d9/0x2d0 [<00000000d7cd302b>] netlink_dump+0x945/0x11a0 [<000000002f43485f>] __netlink_dump_start+0x55d/0x800 [<00000000f76bbeec>] rtnetlink_rcv_msg+0x4fa/0xa00 [<000000009b5761f3>] netlink_rcv_skb+0x29c/0x420 [<0000000087a1dae1>] rtnetlink_rcv+0x15/0x20 [<00000000691b703b>] netlink_unicast+0x4e3/0x6c0 [<00000000b5be0204>] netlink_sendmsg+0x7f2/0xba0 [<0000000096d2aa60>] sock_sendmsg+0xba/0xf0 [<000000008c1b786f>] __sys_sendto+0x1e4/0x330 [<0000000019587b3f>] __x64_sys_sendto+0xe1/0x1a0 [<00000000071f4d56>] do_syscall_64+0x9f/0x300 [<000000002737577f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000057587684>] 0xffffffffffffffff Fixes: c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function") Signed-off-by: Alexey Kodanev Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index e01274bd5e3e..33d9227a8b80 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -3367,7 +3367,7 @@ static int rtnl_dump_all(struct sk_buff *skb, struct netlink_callback *cb) cb->seq = 0; } ret = dumpit(skb, cb); - if (ret < 0) + if (ret) break; } cb->family = idx; From e22d0bfa09a56e427a1a950ccb85621c86b343a4 Mon Sep 17 00:00:00 2001 From: Alexey Kodanev Date: Fri, 2 Nov 2018 19:11:05 +0300 Subject: [PATCH 151/726] ipv6: properly check return value in inet6_dump_all() Make sure we call fib6_dump_end() if it happens that skb->len is zero. rtnl_dump_all() can reset cb->args on the next loop iteration there. Fixes: 08e814c9e8eb ("net/ipv6: Bail early if user only wants cloned entries") Fixes: ae677bbb4441 ("net: Don't return invalid table id error when dumping all families") Signed-off-by: Alexey Kodanev Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 1b8bc008b53b..ae3786132c23 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -591,7 +591,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb) /* fib entries are never clones */ if (arg.filter.flags & RTM_F_CLONED) - return skb->len; + goto out; w = (void *)cb->args[2]; if (!w) { @@ -621,7 +621,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb) tb = fib6_get_table(net, arg.filter.table_id); if (!tb) { if (arg.filter.dump_all_families) - return skb->len; + goto out; NL_SET_ERR_MSG_MOD(cb->extack, "FIB table does not exist"); return -ENOENT; From d016b4a3562b745fd9fa387a47d8de62ccd7e241 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Fri, 2 Nov 2018 21:19:36 +0300 Subject: [PATCH 152/726] net: core: netpoll: Enable netconsole IPv6 link local address There is no reason to discard using source link local address when remote netconsole IPv6 address is set to be link local one. The patch allows administrators to use IPv6 netconsole without explicitly configuring source address: netconsole=@/,@fe80::5054:ff:fe2f:6012/ Signed-off-by: Matwey V. Kornilov Signed-off-by: David S. Miller --- net/core/netpoll.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 5da9552b186b..2b9fdbc43205 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -717,7 +717,8 @@ int netpoll_setup(struct netpoll *np) read_lock_bh(&idev->lock); list_for_each_entry(ifp, &idev->addr_list, if_list) { - if (ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL) + if (!!(ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL) != + !!(ipv6_addr_type(&np->remote_ip.in6) & IPV6_ADDR_LINKLOCAL)) continue; np->local_ip.in6 = ifp->addr; err = 0; From c34c1287778b080ed692c0a46a8e345206cc29e6 Mon Sep 17 00:00:00 2001 From: Andrei Vagin Date: Sun, 4 Nov 2018 22:37:15 -0800 Subject: [PATCH 153/726] sock_diag: fix autoloading of the raw_diag module IPPROTO_RAW isn't registred as an inet protocol, so inet_protos[protocol] is always NULL for it. Cc: Cyrill Gorcunov Cc: Xin Long Fixes: bf2ae2e4bf93 ("sock_diag: request _diag module only when the family or proto has been registered") Signed-off-by: Andrei Vagin Reviewed-by: Cyrill Gorcunov Signed-off-by: David S. Miller --- net/core/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/sock.c b/net/core/sock.c index 6fcc4bc07d19..080a880a1761 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3279,6 +3279,7 @@ int sock_load_diag_module(int family, int protocol) #ifdef CONFIG_INET if (family == AF_INET && + protocol != IPPROTO_RAW && !rcu_access_pointer(inet_protos[protocol])) return -ENOENT; #endif From 97adaddaa6db7a8af81b9b11e30cbe3628cd6700 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 5 Nov 2018 22:31:41 +0900 Subject: [PATCH 154/726] net: bpfilter: fix iptables failure if bpfilter_umh is disabled When iptables command is executed, ip_{set/get}sockopt() try to upload bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko, command is failed. bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled. ip_{set/get}sockopt() only checks CONFIG_BPFILTER. So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled, iptables command is always failed. test config: CONFIG_BPFILTER=y # CONFIG_BPFILTER_UMH is not set test command: %iptables -L iptables: No chain/target/match by that name. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller --- net/ipv4/ip_sockglue.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 26c36cccabdc..fffcc130900e 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -1246,7 +1246,7 @@ int ip_setsockopt(struct sock *sk, int level, return -ENOPROTOOPT; err = do_ip_setsockopt(sk, level, optname, optval, optlen); -#ifdef CONFIG_BPFILTER +#if IS_ENABLED(CONFIG_BPFILTER_UMH) if (optname >= BPFILTER_IPT_SO_SET_REPLACE && optname < BPFILTER_IPT_SET_MAX) err = bpfilter_ip_set_sockopt(sk, optname, optval, optlen); @@ -1559,7 +1559,7 @@ int ip_getsockopt(struct sock *sk, int level, int err; err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0); -#ifdef CONFIG_BPFILTER +#if IS_ENABLED(CONFIG_BPFILTER_UMH) if (optname >= BPFILTER_IPT_SO_GET_INFO && optname < BPFILTER_IPT_GET_MAX) err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen); @@ -1596,7 +1596,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname, err = do_ip_getsockopt(sk, level, optname, optval, optlen, MSG_CMSG_COMPAT); -#ifdef CONFIG_BPFILTER +#if IS_ENABLED(CONFIG_BPFILTER_UMH) if (optname >= BPFILTER_IPT_SO_GET_INFO && optname < BPFILTER_IPT_GET_MAX) err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen); From 7131193157414ac3167d7b2f2feb4c42b415d6c5 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Mon, 5 Nov 2018 18:52:21 +0100 Subject: [PATCH 155/726] net: alx: make alx_drv_name static alx_drv_name is not used outside main.c, so there's no reason for it to have external linkage. Signed-off-by: Rasmus Villemoes Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/alx.h | 1 - drivers/net/ethernet/atheros/alx/main.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h index 78c5de467426..9d0e74f6b089 100644 --- a/drivers/net/ethernet/atheros/alx/alx.h +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -140,6 +140,5 @@ struct alx_priv { }; extern const struct ethtool_ops alx_ethtool_ops; -extern const char alx_drv_name[]; #endif diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 7968c644ad86..c131cfc1b79d 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -49,7 +49,7 @@ #include "hw.h" #include "reg.h" -const char alx_drv_name[] = "alx"; +static const char alx_drv_name[] = "alx"; static void alx_free_txbuf(struct alx_tx_queue *txq, int entry) { From 5841734fa6f997e57e8c29cbb6409bd74a6949e8 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 5 Nov 2018 16:44:59 -0800 Subject: [PATCH 156/726] scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails Fixes: aa73237dcb2d ("scsi: target/core: Always call transport_complete_callback() upon failure") Reviewed-by: David Disseldorp Cc: Nicholas Bellinger Cc: Mike Christie Cc: Christoph Hellwig Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/target/target_core_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index e31e4fc31aa1..2cfd61d62e97 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1778,7 +1778,7 @@ EXPORT_SYMBOL(target_submit_tmr); void transport_generic_request_failure(struct se_cmd *cmd, sense_reason_t sense_reason) { - int ret = 0; + int ret = 0, post_ret; pr_debug("-----[ Storage Engine Exception; sense_reason %d\n", sense_reason); @@ -1790,7 +1790,7 @@ void transport_generic_request_failure(struct se_cmd *cmd, transport_complete_task_attr(cmd); if (cmd->transport_complete_callback) - cmd->transport_complete_callback(cmd, false, NULL); + cmd->transport_complete_callback(cmd, false, &post_ret); if (transport_check_aborted_status(cmd, 1)) return; From f8f4adc1c1661686f492cf27817844a3d0517aff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:34:49 +0100 Subject: [PATCH 157/726] scsi: myrb: fix sprintf buffer overflow warning gcc warns that the 12 byte fw_version field might not be long enough to contain the generated firmware name string: drivers/scsi/myrb.c: In function 'myrb_get_hba_config': drivers/scsi/myrb.c:1052:38: error: '%02d' directive writing between 2 and 3 bytes into a region of size between 2 and 5 [-Werror=format-overflow=] sprintf(cb->fw_version, "%d.%02d-%c-%02d", ^~~~ drivers/scsi/myrb.c:1052:26: note: directive argument in the range [0, 255] sprintf(cb->fw_version, "%d.%02d-%c-%02d", ^~~~~~~~~~~~~~~~~ drivers/scsi/myrb.c:1052:2: note: 'sprintf' output between 10 and 14 bytes into a destination of size 12 sprintf(cb->fw_version, "%d.%02d-%c-%02d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ enquiry2->fw.major_version, ~~~~~~~~~~~~~~~~~~~~~~~~~~~ enquiry2->fw.minor_version, ~~~~~~~~~~~~~~~~~~~~~~~~~~~ enquiry2->fw.firmware_type, ~~~~~~~~~~~~~~~~~~~~~~~~~~~ enquiry2->fw.turn_id); ~~~~~~~~~~~~~~~~~~~~~ I have not checked whether there are appropriate range checks before the sprintf, but there is a range check after it that will bail out in case of out of range version numbers. This means we can simply use snprintf() instead of sprintf() to limit the output buffer size, and it will work correctly. Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)") Signed-off-by: Arnd Bergmann Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/myrb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c index aeb282f617c5..0642f2d0a3bb 100644 --- a/drivers/scsi/myrb.c +++ b/drivers/scsi/myrb.c @@ -1049,7 +1049,8 @@ static int myrb_get_hba_config(struct myrb_hba *cb) enquiry2->fw.firmware_type = '0'; enquiry2->fw.turn_id = 0; } - sprintf(cb->fw_version, "%d.%02d-%c-%02d", + snprintf(cb->fw_version, sizeof(cb->fw_version), + "%d.%02d-%c-%02d", enquiry2->fw.major_version, enquiry2->fw.minor_version, enquiry2->fw.firmware_type, From f8d294324598ec85bea2779512e48c94cbe4d7c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:35:48 +0100 Subject: [PATCH 158/726] scsi: lpfc: fix remoteport access The addition of a spinlock in lpfc_debugfs_nodelist_data() introduced a bug that lets us not skip NULL pointers correctly, as noticed by gcc-8: drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data.constprop': drivers/scsi/lpfc/lpfc_debugfs.c:728:13: error: 'nrport' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) This changes the logic back to what it was, while keeping the added spinlock. Fixes: 9e210178267b ("scsi: lpfc: Synchronize access to remoteport via rport") Signed-off-by: Arnd Bergmann Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_debugfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 0c8005bb0f53..34d311a7dbef 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -698,6 +698,8 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) rport = lpfc_ndlp_get_nrport(ndlp); if (rport) nrport = rport->remoteport; + else + nrport = NULL; spin_unlock(&phba->hbalock); if (!nrport) continue; From 77409c4cdc44560e1b3b839e62d7f73478199680 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:44:13 +0100 Subject: [PATCH 159/726] scsi: myrs: avoid stack overflow warning Putting a 1024 byte data structure on the stack is generally a bad idea. On 32-bit systems, it also triggers a compile-time warning when building with -Og: drivers/scsi/myrs.c: In function 'myrs_get_ctlr_info': drivers/scsi/myrs.c:212:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] We only really need three members of the structure, so just read them manually here instead of copying the entire structure. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Signed-off-by: Arnd Bergmann Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/myrs.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c index 0264a2e2bc19..b8d54ef8cf6d 100644 --- a/drivers/scsi/myrs.c +++ b/drivers/scsi/myrs.c @@ -163,9 +163,12 @@ static unsigned char myrs_get_ctlr_info(struct myrs_hba *cs) dma_addr_t ctlr_info_addr; union myrs_sgl *sgl; unsigned char status; - struct myrs_ctlr_info old; + unsigned short ldev_present, ldev_critical, ldev_offline; + + ldev_present = cs->ctlr_info->ldev_present; + ldev_critical = cs->ctlr_info->ldev_critical; + ldev_offline = cs->ctlr_info->ldev_offline; - memcpy(&old, cs->ctlr_info, sizeof(struct myrs_ctlr_info)); ctlr_info_addr = dma_map_single(&cs->pdev->dev, cs->ctlr_info, sizeof(struct myrs_ctlr_info), DMA_FROM_DEVICE); @@ -198,9 +201,9 @@ static unsigned char myrs_get_ctlr_info(struct myrs_hba *cs) cs->ctlr_info->rbld_active + cs->ctlr_info->exp_active != 0) cs->needs_update = true; - if (cs->ctlr_info->ldev_present != old.ldev_present || - cs->ctlr_info->ldev_critical != old.ldev_critical || - cs->ctlr_info->ldev_offline != old.ldev_offline) + if (cs->ctlr_info->ldev_present != ldev_present || + cs->ctlr_info->ldev_critical != ldev_critical || + cs->ctlr_info->ldev_offline != ldev_offline) shost_printk(KERN_INFO, cs->host, "Logical drive count changes (%d/%d/%d)\n", cs->ctlr_info->ldev_critical, From a3ecf48248a393438e77e569a0047e968e0ec6c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:47:23 +0100 Subject: [PATCH 160/726] scsi: myrs: only build on little-endian platforms Reading throught the new driver, I noticed that this cannot work on big-endian CPUs, and the old DAC960 had exactly the same behavior. To document this for the future, add a Kconfig dependency that prevents it from being included in big-endian kernels. Since the hardware is really old and we never had a working driver on it for big-endian platforms, it's unlikely to make a difference to users. Signed-off-by: Arnd Bergmann Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f07444d30b21..640cd1b31a18 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -578,6 +578,7 @@ config SCSI_MYRB config SCSI_MYRS tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)" depends on PCI + depends on !CPU_BIG_ENDIAN || COMPILE_TEST select RAID_ATTRS help This driver adds support for the Mylex DAC960, AcceleRAID, and From e34ff8edcae89922d187425ab0b82e6a039aa371 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 26 Oct 2018 15:07:31 +0800 Subject: [PATCH 161/726] scsi: hisi_sas: Remove set but not used variable 'dq_list' Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/hisi_sas/hisi_sas_v1_hw.c: In function 'start_delivery_v1_hw': drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:907:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v2_hw.c: In function 'start_delivery_v2_hw': drivers/scsi/hisi_sas/hisi_sas_v2_hw.c:1671:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function 'start_delivery_v3_hw': drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:889:20: warning: variable 'dq_list' set but not used [-Wunused-but-set-variable] It never used since introduction in commit fa222db0b036 ("scsi: hisi_sas: Don't lock DQ for complete task sending") Signed-off-by: YueHaibing Acked-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 -- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 -- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 -- 3 files changed, 6 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index f0e457e6884e..8df822a4a1bd 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -904,11 +904,9 @@ static void start_delivery_v1_hw(struct hisi_sas_dq *dq) { struct hisi_hba *hisi_hba = dq->hisi_hba; struct hisi_sas_slot *s, *s1, *s2 = NULL; - struct list_head *dq_list; int dlvry_queue = dq->id; int wp; - dq_list = &dq->list; list_for_each_entry_safe(s, s1, &dq->list, delivery) { if (!s->ready) break; diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index cc36b6473e98..77a85ead483e 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -1670,11 +1670,9 @@ static void start_delivery_v2_hw(struct hisi_sas_dq *dq) { struct hisi_hba *hisi_hba = dq->hisi_hba; struct hisi_sas_slot *s, *s1, *s2 = NULL; - struct list_head *dq_list; int dlvry_queue = dq->id; int wp; - dq_list = &dq->list; list_for_each_entry_safe(s, s1, &dq->list, delivery) { if (!s->ready) break; diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index bd4ce38b98d2..a369450a1fa7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -886,11 +886,9 @@ static void start_delivery_v3_hw(struct hisi_sas_dq *dq) { struct hisi_hba *hisi_hba = dq->hisi_hba; struct hisi_sas_slot *s, *s1, *s2 = NULL; - struct list_head *dq_list; int dlvry_queue = dq->id; int wp; - dq_list = &dq->list; list_for_each_entry_safe(s, s1, &dq->list, delivery) { if (!s->ready) break; From 0d52e642c0ccd7a877a58b6ec23552eb35e7170c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sun, 28 Oct 2018 14:05:48 +0900 Subject: [PATCH 162/726] scsi: qla2xxx: Fix a typo in MODULE_PARM_DESC This patch fixes a spelling typo in MODULE_PARM_DESC of ql2xplogiabsentdevice. Signed-off-by: Masanari Iida Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 518f15141170..20c85eed1a75 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -67,7 +67,7 @@ module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xplogiabsentdevice, "Option to enable PLOGI to devices that are not present after " "a Fabric scan. This is needed for several broken switches. " - "Default is 0 - no PLOGI. 1 - perfom PLOGI."); + "Default is 0 - no PLOGI. 1 - perform PLOGI."); int ql2xloginretrycount = 0; module_param(ql2xloginretrycount, int, S_IRUGO); From 96edebd6bb995f2acb7694bed6e01bf6f5a7b634 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 24 Oct 2018 18:45:33 +1100 Subject: [PATCH 163/726] scsi: NCR5380: Return false instead of NULL I overlooked this statement when I recently converted the function result type from struct scsi_cmnd * to bool. No change to object code. Signed-off-by: Finn Thain Signed-off-by: Martin K. Petersen --- drivers/scsi/NCR5380.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 8429c855701f..01c23d27f290 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1198,7 +1198,7 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd) out: if (!hostdata->selecting) - return NULL; + return false; hostdata->selecting = NULL; return ret; } From 08fd9a82fda86529bb2f2af3c2f7cb657b4d3066 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 27 Aug 2018 18:30:16 +0300 Subject: [PATCH 164/726] usb: dwc3: core: Clean up ULPI device If dwc3_core_init_mode() fails with deferred probe, next probe fails on sysfs with sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi' To avoid this failure, clean up ULPI device. Cc: Signed-off-by: Andy Shevchenko Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index becfbb87f791..2f2048aa5fde 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1499,6 +1499,7 @@ static int dwc3_probe(struct platform_device *pdev) err5: dwc3_event_buffers_cleanup(dwc); + dwc3_ulpi_exit(dwc); err4: dwc3_free_scratch_buffers(dwc); From ba3a51ac32ebcf8d0a54b37f1af268ad8a31c52f Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 2 Aug 2018 20:17:16 -0700 Subject: [PATCH 165/726] usb: dwc3: gadget: Properly check last unaligned/zero chain TRB Current check for the last extra TRB for zero and unaligned transfers does not account for isoc OUT. The last TRB of the Buffer Descriptor for isoc OUT transfers will be retired with HWO=0. As a result, we won't return early. The req->remaining will be updated to include the BUFSIZ count of the extra TRB, and the actual number of transferred bytes calculation will be wrong. To fix this, check whether it's a short or zero packet and the last TRB chain bit to return early. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 679c12e14522..06e22afdf3d1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2259,7 +2259,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if ((req->zero || req->unaligned) && (trb->ctrl & DWC3_TRB_CTRL_HWO)) { + if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } From 0ae790683fc28bb718d74f87cdf753c6445fe28d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Nov 2018 19:23:28 +1100 Subject: [PATCH 166/726] powerpc/mm/64s: Consolidate SLB assertions The code for assert_slb_exists() and assert_slb_notexists() is almost identical, except for the polarity of the WARN_ON(). In a future patch we'll need to modify this code, so consolidate it now into a single function. Signed-off-by: Michael Ellerman --- arch/powerpc/mm/slb.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index c3fdf2969d9f..f3e002ee457b 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -58,7 +58,7 @@ static inline unsigned long mk_vsid_data(unsigned long ea, int ssize, return __mk_vsid_data(get_kernel_vsid(ea, ssize), ssize, flags); } -static void assert_slb_exists(unsigned long ea) +static void assert_slb_presence(bool present, unsigned long ea) { #ifdef CONFIG_DEBUG_VM unsigned long tmp; @@ -66,19 +66,8 @@ static void assert_slb_exists(unsigned long ea) WARN_ON_ONCE(mfmsr() & MSR_EE); asm volatile("slbfee. %0, %1" : "=r"(tmp) : "r"(ea) : "cr0"); - WARN_ON(tmp == 0); -#endif -} -static void assert_slb_notexists(unsigned long ea) -{ -#ifdef CONFIG_DEBUG_VM - unsigned long tmp; - - WARN_ON_ONCE(mfmsr() & MSR_EE); - - asm volatile("slbfee. %0, %1" : "=r"(tmp) : "r"(ea) : "cr0"); - WARN_ON(tmp != 0); + WARN_ON(present == (tmp == 0)); #endif } @@ -114,7 +103,7 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize, */ slb_shadow_update(ea, ssize, flags, index); - assert_slb_notexists(ea); + assert_slb_presence(false, ea); asm volatile("slbmte %0,%1" : : "r" (mk_vsid_data(ea, ssize, flags)), "r" (mk_esid_data(ea, ssize, index)) @@ -137,7 +126,7 @@ void __slb_restore_bolted_realmode(void) "r" (be64_to_cpu(p->save_area[index].esid))); } - assert_slb_exists(local_paca->kstack); + assert_slb_presence(true, local_paca->kstack); } /* @@ -185,7 +174,7 @@ void slb_flush_and_restore_bolted(void) :: "r" (be64_to_cpu(p->save_area[KSTACK_INDEX].vsid)), "r" (be64_to_cpu(p->save_area[KSTACK_INDEX].esid)) : "memory"); - assert_slb_exists(get_paca()->kstack); + assert_slb_presence(true, get_paca()->kstack); get_paca()->slb_cache_ptr = 0; @@ -443,9 +432,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) ea = (unsigned long) get_paca()->slb_cache[i] << SID_SHIFT; /* - * Could assert_slb_exists here, but hypervisor - * or machine check could have come in and - * removed the entry at this point. + * Could assert_slb_presence(true) here, but + * hypervisor or machine check could have come + * in and removed the entry at this point. */ slbie_data = ea; @@ -676,7 +665,7 @@ static long slb_insert_entry(unsigned long ea, unsigned long context, * User preloads should add isync afterwards in case the kernel * accesses user memory before it returns to userspace with rfid. */ - assert_slb_notexists(ea); + assert_slb_presence(false, ea); asm volatile("slbmte %0, %1" : : "r" (vsid_data), "r" (esid_data)); barrier(); From 08e6a3434e2125e4b21d0d3f84678d427345bc0d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Nov 2018 19:25:18 +1100 Subject: [PATCH 167/726] powerpc/mm/64s: Use PPC_SLBFEE macro Old toolchains don't know about slbfee and break the build, eg: {standard input}:37: Error: Unrecognized opcode: `slbfee.' Fix it by using the macro version. We need to add an underscore version that takes raw register numbers from the inline asm, rather than our Rx macros. Fixes: e15a4fea4dee ("powerpc/64s/hash: Add some SLB debugging tests") Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ppc-opcode.h | 2 ++ arch/powerpc/mm/slb.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 6093bc8f74e5..a6e9e314c707 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -493,6 +493,8 @@ __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b)) #define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \ __PPC_RT(t) | __PPC_RB(b)) +#define __PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \ + ___PPC_RT(t) | ___PPC_RB(b)) #define PPC_ICBT(c,a,b) stringify_in_c(.long PPC_INST_ICBT | \ __PPC_CT(c) | __PPC_RA0(a) | __PPC_RB(b)) /* PASemi instructions */ diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index f3e002ee457b..457fd29448b1 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -65,7 +66,7 @@ static void assert_slb_presence(bool present, unsigned long ea) WARN_ON_ONCE(mfmsr() & MSR_EE); - asm volatile("slbfee. %0, %1" : "=r"(tmp) : "r"(ea) : "cr0"); + asm volatile(__PPC_SLBFEE_DOT(%0, %1) : "=r"(tmp) : "r"(ea) : "cr0"); WARN_ON(present == (tmp == 0)); #endif From 9586d569a369dc585a3e191dcabd72748e3c9c5c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Nov 2018 19:25:38 +1100 Subject: [PATCH 168/726] powerpc/mm/64s: Only use slbfee on CPUs that support it The slbfee instruction was only added in ISA 2.05 (Power6), it's not supported on older CPUs. We don't have a CPU feature for that ISA version though, so just use the ISA 2.06 feature flag. Fixes: e15a4fea4dee ("powerpc/64s/hash: Add some SLB debugging tests") Signed-off-by: Michael Ellerman --- arch/powerpc/mm/slb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 457fd29448b1..b663a36f9ada 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -66,6 +66,9 @@ static void assert_slb_presence(bool present, unsigned long ea) WARN_ON_ONCE(mfmsr() & MSR_EE); + if (!cpu_has_feature(CPU_FTR_ARCH_206)) + return; + asm volatile(__PPC_SLBFEE_DOT(%0, %1) : "=r"(tmp) : "r"(ea) : "cr0"); WARN_ON(present == (tmp == 0)); From d9cccfa7c4d1d9ef967ec9308df7304a18609b30 Mon Sep 17 00:00:00 2001 From: Liam Merwick Date: Fri, 2 Nov 2018 14:04:23 +0000 Subject: [PATCH 169/726] xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message If a call to xenmem_reservation_increase() in gnttab_dma_free_pages() fails it triggers a message "Failed to decrease reservation..." which should be "Failed to increase reservation..." Fixes: 9bdc7304f536 ('xen/grant-table: Allow allocating buffers suitable for DMA') Reported-by: Ross Philipson Signed-off-by: Liam Merwick Reviewed-by: Mark Kanda Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross --- drivers/xen/grant-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 84575baceebc..97341fa75458 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -914,7 +914,7 @@ int gnttab_dma_free_pages(struct gnttab_dma_alloc_args *args) ret = xenmem_reservation_increase(args->nr_pages, args->frames); if (ret != args->nr_pages) { - pr_debug("Failed to decrease reservation for DMA buffer\n"); + pr_debug("Failed to increase reservation for DMA buffer\n"); ret = -EFAULT; } else { ret = 0; From 6cc4a0863c9709c512280c64e698d68443ac8053 Mon Sep 17 00:00:00 2001 From: Manjunath Patil Date: Tue, 30 Oct 2018 09:49:21 -0700 Subject: [PATCH 170/726] xen-blkfront: fix kernel panic with negotiate_mq error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - #8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... #9 blkif_free at ffffffffa0149aaa [xen_blkfront] #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] #11 blkback_changed at ffffffffa014ea8b [xen_blkfront] #12 xenbus_otherend_changed at ffffffff81424670 #13 backend_changed at ffffffff81426dc3 #14 xenwatch_thread at ffffffff81422f29 #15 kthread at ffffffff810abe6a #16 ret_from_fork at ffffffff81754078 Cc: stable@vger.kernel.org Fixes: 7ed8ce1c5fc7 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil Acked-by: Roger Pau Monné Signed-off-by: Juergen Gross --- drivers/block/xen-blkfront.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 9eea83ae01c6..9ac3999a55b7 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1919,6 +1919,7 @@ static int negotiate_mq(struct blkfront_info *info) GFP_KERNEL); if (!info->rinfo) { xenbus_dev_fatal(info->xbdev, -ENOMEM, "allocating ring_info structure"); + info->nr_rings = 0; return -ENOMEM; } From ba26cd7d58dcc50e25c8f02b5376c05046b181dc Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 5 Nov 2018 08:58:35 +0100 Subject: [PATCH 171/726] mtd: sa1100: avoid VLA in sa1100_setup_mtd Enabling -Wvla found another variable-length array with randconfig testing: drivers/mtd/maps/sa1100-flash.c: In function 'sa1100_setup_mtd': drivers/mtd/maps/sa1100-flash.c:224:10: error: ISO C90 forbids variable length array 'cdev' [-Werror=vla] Dynamically allocate the cdev array passed to mtd_concat_create() instead of using a VLA. Reported-by: Arnd Bergmann Signed-off-by: Boris Brezillon Cc: Kees Cook Cc: Olof Johansson --- drivers/mtd/maps/sa1100-flash.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 784c6e1a0391..fd5fe12d7461 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -221,7 +221,14 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, info->mtd = info->subdev[0].mtd; ret = 0; } else if (info->num_subdev > 1) { - struct mtd_info *cdev[nr]; + struct mtd_info **cdev; + + cdev = kmalloc_array(nr, sizeof(*cdev), GFP_KERNEL); + if (!cdev) { + ret = -ENOMEM; + goto err; + } + /* * We detected multiple devices. Concatenate them together. */ @@ -230,6 +237,7 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev, info->mtd = mtd_concat_create(cdev, info->num_subdev, plat->name); + kfree(cdev); if (info->mtd == NULL) { ret = -ENXIO; goto err; From df18bfd35bbf7cb1a420b5beede1de29343793b3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 07:09:07 -0400 Subject: [PATCH 172/726] media: v4l: fix uapi mpeg slice params definition We get a headers_check warning about the newly defined ioctl command structures: ./usr/include/linux/v4l2-controls.h:1105: found __[us]{8,16,32,64} type without #include This is resolved by including linux/types.h, as suggested by the warning, but there is another problem: Three of the four structures have an odd number of __u8 headers, but are aligned to 32 bit in the v4l2_ctrl_mpeg2_slice_params, so we get an implicit padding byte for each one. To solve that, let's add explicit padding that can be set to zero and verified in the kernel. Fixes: c27bb30e7b6d ("media: v4l: Add definitions for MPEG-2 slice format and metadata") Signed-off-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-ctrls.c | 5 +++++ include/uapi/linux/v4l2-controls.h | 7 +++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index 6e37950292cd..5f2b033a7a42 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1664,6 +1664,11 @@ static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx, p_mpeg2_slice_params->forward_ref_index >= VIDEO_MAX_FRAME) return -EINVAL; + if (p_mpeg2_slice_params->pad || + p_mpeg2_slice_params->picture.pad || + p_mpeg2_slice_params->sequence.pad) + return -EINVAL; + return 0; case V4L2_CTRL_TYPE_MPEG2_QUANTIZATION: diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 86a54916206f..998983a6e6b7 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -47,11 +47,11 @@ * videodev2.h. */ -#include - #ifndef __LINUX_V4L2_CONTROLS_H #define __LINUX_V4L2_CONTROLS_H +#include + /* Control classes */ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ @@ -1112,6 +1112,7 @@ struct v4l2_mpeg2_sequence { __u8 profile_and_level_indication; __u8 progressive_sequence; __u8 chroma_format; + __u8 pad; }; struct v4l2_mpeg2_picture { @@ -1130,6 +1131,7 @@ struct v4l2_mpeg2_picture { __u8 alternate_scan; __u8 repeat_first_field; __u8 progressive_frame; + __u8 pad; }; struct v4l2_ctrl_mpeg2_slice_params { @@ -1144,6 +1146,7 @@ struct v4l2_ctrl_mpeg2_slice_params { __u8 backward_ref_index; __u8 forward_ref_index; + __u8 pad; }; struct v4l2_ctrl_mpeg2_quantization { From 0ede1794b9667d9cd35d1ac27f2eeff52d5733d5 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 8 Oct 2018 18:11:28 -0400 Subject: [PATCH 173/726] media: tc358743: Remove unnecessary self assignment Clang warns when a variable is assigned to itself. drivers/media/i2c/tc358743.c:1921:7: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] ret = ret; ~~~ ^ ~~~ 1 warning generated. Signed-off-by: Nathan Chancellor Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/tc358743.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index ca5d92942820..41d470d9ca94 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -1918,7 +1918,6 @@ static int tc358743_probe_of(struct tc358743_state *state) ret = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(ep), &endpoint); if (ret) { dev_err(dev, "failed to parse endpoint\n"); - ret = ret; goto put_node; } From 7cf7b2e977abf3f992036939e35a8eab60013aff Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 10 Oct 2018 03:03:43 -0400 Subject: [PATCH 174/726] media: vicodec: lower minimum height to 360 Lower the minimum height to 360 to be consistent with the webcam input of vivid. The 480 was rather arbitrary but it made it harder to use vivid as a source for encoding since the default resolution when you load vivid is 640x360. Signed-off-by: Hans Verkuil Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vicodec/vicodec-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/vicodec/vicodec-core.c b/drivers/media/platform/vicodec/vicodec-core.c index 1eb9132bfc85..b292cff26c86 100644 --- a/drivers/media/platform/vicodec/vicodec-core.c +++ b/drivers/media/platform/vicodec/vicodec-core.c @@ -42,7 +42,7 @@ MODULE_PARM_DESC(debug, " activates debug info"); #define MAX_WIDTH 4096U #define MIN_WIDTH 640U #define MAX_HEIGHT 2160U -#define MIN_HEIGHT 480U +#define MIN_HEIGHT 360U #define dprintk(dev, fmt, arg...) \ v4l2_dbg(1, debug, &dev->v4l2_dev, "%s: " fmt, __func__, ## arg) From 55623b4169056d7bb493d1c6f715991f8db67302 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 10 Oct 2018 07:12:15 -0400 Subject: [PATCH 175/726] media: cec: check for non-OK/NACK conditions while claiming a LA During the configuration phase of a CEC adapter it is trying to claim a free logical address by polling. However, the code doesn't check if there were errors other than OK or NACK, those are just treated as if the poll was NACKed. Instead check for such errors and retry the poll. And if the problem persists then don't claim this LA since there is something weird going on. Signed-off-by: Hans Verkuil Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 47 ++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 31d1f4ab915e..6fcd575e1b88 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1180,6 +1180,8 @@ static int cec_config_log_addr(struct cec_adapter *adap, { struct cec_log_addrs *las = &adap->log_addrs; struct cec_msg msg = { }; + const unsigned int max_retries = 2; + unsigned int i; int err; if (cec_has_log_addr(adap, log_addr)) @@ -1188,19 +1190,44 @@ static int cec_config_log_addr(struct cec_adapter *adap, /* Send poll message */ msg.len = 1; msg.msg[0] = (log_addr << 4) | log_addr; - err = cec_transmit_msg_fh(adap, &msg, NULL, true); + + for (i = 0; i < max_retries; i++) { + err = cec_transmit_msg_fh(adap, &msg, NULL, true); + + /* + * While trying to poll the physical address was reset + * and the adapter was unconfigured, so bail out. + */ + if (!adap->is_configuring) + return -EINTR; + + if (err) + return err; + + /* + * The message was aborted due to a disconnect or + * unconfigure, just bail out. + */ + if (msg.tx_status & CEC_TX_STATUS_ABORTED) + return -EINTR; + if (msg.tx_status & CEC_TX_STATUS_OK) + return 0; + if (msg.tx_status & CEC_TX_STATUS_NACK) + break; + /* + * Retry up to max_retries times if the message was neither + * OKed or NACKed. This can happen due to e.g. a Lost + * Arbitration condition. + */ + } /* - * While trying to poll the physical address was reset - * and the adapter was unconfigured, so bail out. + * If we are unable to get an OK or a NACK after max_retries attempts + * (and note that each attempt already consists of four polls), then + * then we assume that something is really weird and that it is not a + * good idea to try and claim this logical address. */ - if (!adap->is_configuring) - return -EINTR; - - if (err) - return err; - - if (msg.tx_status & CEC_TX_STATUS_OK) + if (i == max_retries) return 0; /* From 2efaf6ebb34fe66c613e94c6e97ae95879455bc3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 11 Oct 2018 06:38:27 -0400 Subject: [PATCH 176/726] media: cec: increase debug level for 'queue full' The "transmit queue full" message doesn't warrant debug level 1 since it is already clear from the error code what's going on. Bump to level 2. Signed-off-by: Hans Verkuil Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 6fcd575e1b88..65a933a21e68 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -807,7 +807,7 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, } if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) { - dprintk(1, "%s: transmit queue full\n", __func__); + dprintk(2, "%s: transmit queue full\n", __func__); return -EBUSY; } From ef86eaf97acd6d82cd3fd40f997b1c8c4895a443 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Thu, 18 Oct 2018 14:54:29 -0400 Subject: [PATCH 177/726] media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queue To be consistent with the rest of the mem2mem helpers, rename vb2_m2m_request_queue to v4l2_m2m_request_queue. This is just a cosmetic change. Signed-off-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vim2m.c | 2 +- drivers/media/v4l2-core/v4l2-mem2mem.c | 4 ++-- drivers/staging/media/sunxi/cedrus/cedrus.c | 2 +- include/media/v4l2-mem2mem.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c index af150a0395df..d82db738f174 100644 --- a/drivers/media/platform/vim2m.c +++ b/drivers/media/platform/vim2m.c @@ -1009,7 +1009,7 @@ static const struct v4l2_m2m_ops m2m_ops = { static const struct media_device_ops m2m_media_ops = { .req_validate = vb2_request_validate, - .req_queue = vb2_m2m_request_queue, + .req_queue = v4l2_m2m_request_queue, }; static int vim2m_probe(struct platform_device *pdev) diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index d7806db222d8..1ed2465972ac 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -953,7 +953,7 @@ void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, } EXPORT_SYMBOL_GPL(v4l2_m2m_buf_queue); -void vb2_m2m_request_queue(struct media_request *req) +void v4l2_m2m_request_queue(struct media_request *req) { struct media_request_object *obj, *obj_safe; struct v4l2_m2m_ctx *m2m_ctx = NULL; @@ -997,7 +997,7 @@ void vb2_m2m_request_queue(struct media_request *req) if (m2m_ctx) v4l2_m2m_try_schedule(m2m_ctx); } -EXPORT_SYMBOL_GPL(vb2_m2m_request_queue); +EXPORT_SYMBOL_GPL(v4l2_m2m_request_queue); /* Videobuf2 ioctl helpers */ diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 82558455384a..dd121f66fa2d 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -253,7 +253,7 @@ static const struct v4l2_m2m_ops cedrus_m2m_ops = { static const struct media_device_ops cedrus_m2m_media_ops = { .req_validate = cedrus_request_validate, - .req_queue = vb2_m2m_request_queue, + .req_queue = v4l2_m2m_request_queue, }; static int cedrus_probe(struct platform_device *pdev) diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index 58c1ecf3d648..5467264771ec 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -624,7 +624,7 @@ v4l2_m2m_dst_buf_remove_by_idx(struct v4l2_m2m_ctx *m2m_ctx, unsigned int idx) /* v4l2 request helper */ -void vb2_m2m_request_queue(struct media_request *req); +void v4l2_m2m_request_queue(struct media_request *req); /* v4l2 ioctl helpers */ From 6282e916f774e37845c65d1eae9f8c649004f033 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 5 Nov 2018 14:54:56 +0100 Subject: [PATCH 178/726] ARM: 8809/1: proc-v7: fix Thumb annotation of cpu_v7_hvc_switch_mm Due to what appears to be a copy/paste error, the opening ENTRY() of cpu_v7_hvc_switch_mm() lacks a matching ENDPROC(), and instead, the one for cpu_v7_smc_switch_mm() is duplicated. Given that it is ENDPROC() that emits the Thumb annotation, the cpu_v7_hvc_switch_mm() routine will be called in ARM mode on a Thumb2 kernel, resulting in the following splat: Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-00030-g4d28ad89189d-dirty #488 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 PC is at cpu_v7_hvc_switch_mm+0x12/0x18 LR is at flush_old_exec+0x31b/0x570 pc : [] lr : [] psr: 00000013 sp : ee899e50 ip : 00000000 fp : 00000001 r10: eda28f34 r9 : eda31800 r8 : c12470e0 r7 : eda1fc00 r6 : eda53000 r5 : 00000000 r4 : ee88c000 r3 : c0316eec r2 : 00000001 r1 : eda53000 r0 : 6da6c000 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Note the 'ISA ARM' in the last line. Fix this by using the correct name in ENDPROC(). Cc: Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening") Reviewed-by: Dave Martin Acked-by: Marc Zyngier Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b78d59a1cc05..fccd4d99f505 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm) hvc #0 ldmfd sp!, {r0 - r3} b cpu_v7_switch_mm -ENDPROC(cpu_v7_smc_switch_mm) +ENDPROC(cpu_v7_hvc_switch_mm) #endif ENTRY(cpu_v7_iciallu_switch_mm) mov r3, #0 From 86d4d068df573a8c2105554624796c086d6bec3d Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Tue, 6 Nov 2018 12:00:01 +0100 Subject: [PATCH 179/726] parisc: Revert "Release spinlocks using ordered store" This reverts commit d27dfa13b9f77ae7e6ed09d70a0426ed26c1a8f9. Unfortunately, this patch needs to be reverted. We need the full sync barrier and not the limited barrier provided by using an ordered store. The sync ensures that all accesses and cache purge instructions that follow the sync are performed after all such instructions prior the sync instruction have completed executing. The patch breaks the rwlock implementation in glibc. This caused the test-lock application in the libprelude testsuite to hang. With the change reverted, the test runs correctly and the libprelude package builds successfully. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/include/asm/spinlock.h | 4 ++-- arch/parisc/kernel/syscall.S | 12 ++++++++---- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h index 16aec9ba2580..8a63515f03bf 100644 --- a/arch/parisc/include/asm/spinlock.h +++ b/arch/parisc/include/asm/spinlock.h @@ -37,8 +37,8 @@ static inline void arch_spin_unlock(arch_spinlock_t *x) volatile unsigned int *a; a = __ldcw_align(x); - /* Release with ordered store. */ - __asm__ __volatile__("stw,ma %0,0(%1)" : : "r"(1), "r"(a) : "memory"); + mb(); + *a = 1; } static inline int arch_spin_trylock(arch_spinlock_t *x) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 9505c317818d..a9bc90dc4ae7 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -640,7 +640,8 @@ cas_action: sub,<> %r28, %r25, %r0 2: stw %r24, 0(%r26) /* Free lock */ - stw,ma %r20, 0(%sr2,%r20) + sync + stw %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG /* Clear thread register indicator */ stw %r0, 4(%sr2,%r20) @@ -654,7 +655,8 @@ cas_action: 3: /* Error occurred on load or store */ /* Free lock */ - stw,ma %r20, 0(%sr2,%r20) + sync + stw %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG stw %r0, 4(%sr2,%r20) #endif @@ -855,7 +857,8 @@ cas2_action: cas2_end: /* Free lock */ - stw,ma %r20, 0(%sr2,%r20) + sync + stw %r20, 0(%sr2,%r20) /* Enable interrupts */ ssm PSW_SM_I, %r0 /* Return to userspace, set no error */ @@ -865,7 +868,8 @@ cas2_end: 22: /* Error occurred on load or store */ /* Free lock */ - stw,ma %r20, 0(%sr2,%r20) + sync + stw %r20, 0(%sr2,%r20) ssm PSW_SM_I, %r0 ldo 1(%r0),%r28 b lws_exit From 8e88c29b351ed4e09dd63f825f1c8260b0cb0ab3 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Sun, 23 Sep 2018 17:04:20 +0200 Subject: [PATCH 180/726] perf tools: Do not zero sample_id_all for group members Andi reported following malfunction: # perf record -e '{ref-cycles,cycles}:S' -a sleep 1 # perf script non matching sample_id_all That's because we disable sample_id_all bit for non-sampling group members. We can't do that, because it needs to be the same over the whole event list. This patch keeps it untouched again. Reported-by: Andi Kleen Tested-by: Andi Kleen Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180923150420.27327-1-jolsa@kernel.org Fixes: e9add8bac6c6 ("perf evsel: Disable write_backward for leader sampling group events") Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/attr/test-record-group-sampling | 1 - tools/perf/util/evsel.c | 1 - 2 files changed, 2 deletions(-) diff --git a/tools/perf/tests/attr/test-record-group-sampling b/tools/perf/tests/attr/test-record-group-sampling index 8a33ca4f9e1f..f0729c454f16 100644 --- a/tools/perf/tests/attr/test-record-group-sampling +++ b/tools/perf/tests/attr/test-record-group-sampling @@ -37,4 +37,3 @@ sample_freq=0 sample_period=0 freq=0 write_backward=0 -sample_id_all=0 diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 6d187059a373..d37bb1566cd9 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -956,7 +956,6 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts, attr->sample_freq = 0; attr->sample_period = 0; attr->write_backward = 0; - attr->sample_id_all = 0; } if (opts->no_samples) From b50b769bcbc24d68d95870d87354ec45fa0f07bb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 6 Nov 2018 05:54:48 -0500 Subject: [PATCH 181/726] media: dm365_ipipeif: better annotate a fall though Shut up this warning: drivers/staging/media/davinci_vpfe/dm365_ipipeif.c: In function 'ipipeif_hw_setup': drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:298:3: warning: this statement may fall through [-Wimplicit-fallthrough=] switch (isif_port_if) { ^~~~~~ drivers/staging/media/davinci_vpfe/dm365_ipipeif.c:314:2: note: here case IPIPEIF_SDRAM_YUV: ^~~~ By annotating a fall though case at the right place. Acked-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/davinci_vpfe/dm365_ipipeif.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c index a53231b08d30..e3425bf082ae 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c @@ -310,6 +310,7 @@ static int ipipeif_hw_setup(struct v4l2_subdev *sd) ipipeif_write(val, ipipeif_base_addr, IPIPEIF_CFG2); break; } + /* fall through */ case IPIPEIF_SDRAM_YUV: /* Set clock divider */ From 92539d3eda2c090b382699bbb896d4b54e9bdece Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 5 Nov 2018 09:35:44 -0500 Subject: [PATCH 182/726] media: v4l: event: Add subscription to list before calling "add" operation Patch ad608fbcf166 changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by: Dave Stevenson Signed-off-by: Sakari Ailus Tested-by: Dave Stevenson Reviewed-by: Hans Verkuil Tested-by: Hans Verkuil Cc: stable@vger.kernel.org (for 4.14 and up) Signed-off-by: Mauro Carvalho Chehab --- drivers/media/v4l2-core/v4l2-event.c | 43 ++++++++++++++++------------ 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/media/v4l2-core/v4l2-event.c b/drivers/media/v4l2-core/v4l2-event.c index a3ef1f50a4b3..481e3c65cf97 100644 --- a/drivers/media/v4l2-core/v4l2-event.c +++ b/drivers/media/v4l2-core/v4l2-event.c @@ -193,6 +193,22 @@ int v4l2_event_pending(struct v4l2_fh *fh) } EXPORT_SYMBOL_GPL(v4l2_event_pending); +static void __v4l2_event_unsubscribe(struct v4l2_subscribed_event *sev) +{ + struct v4l2_fh *fh = sev->fh; + unsigned int i; + + lockdep_assert_held(&fh->subscribe_lock); + assert_spin_locked(&fh->vdev->fh_lock); + + /* Remove any pending events for this subscription */ + for (i = 0; i < sev->in_use; i++) { + list_del(&sev->events[sev_pos(sev, i)].list); + fh->navailable--; + } + list_del(&sev->list); +} + int v4l2_event_subscribe(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub, unsigned elems, const struct v4l2_subscribed_event_ops *ops) @@ -224,27 +240,23 @@ int v4l2_event_subscribe(struct v4l2_fh *fh, spin_lock_irqsave(&fh->vdev->fh_lock, flags); found_ev = v4l2_event_subscribed(fh, sub->type, sub->id); + if (!found_ev) + list_add(&sev->list, &fh->subscribed); spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); if (found_ev) { /* Already listening */ kvfree(sev); - goto out_unlock; - } - - if (sev->ops && sev->ops->add) { + } else if (sev->ops && sev->ops->add) { ret = sev->ops->add(sev, elems); if (ret) { + spin_lock_irqsave(&fh->vdev->fh_lock, flags); + __v4l2_event_unsubscribe(sev); + spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); kvfree(sev); - goto out_unlock; } } - spin_lock_irqsave(&fh->vdev->fh_lock, flags); - list_add(&sev->list, &fh->subscribed); - spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); - -out_unlock: mutex_unlock(&fh->subscribe_lock); return ret; @@ -279,7 +291,6 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, { struct v4l2_subscribed_event *sev; unsigned long flags; - int i; if (sub->type == V4L2_EVENT_ALL) { v4l2_event_unsubscribe_all(fh); @@ -291,14 +302,8 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, spin_lock_irqsave(&fh->vdev->fh_lock, flags); sev = v4l2_event_subscribed(fh, sub->type, sub->id); - if (sev != NULL) { - /* Remove any pending events for this subscription */ - for (i = 0; i < sev->in_use; i++) { - list_del(&sev->events[sev_pos(sev, i)].list); - fh->navailable--; - } - list_del(&sev->list); - } + if (sev != NULL) + __v4l2_event_unsubscribe(sev); spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); From 003aedaed65d4f71f3f122ea1e079c648bab113e Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 9 Oct 2018 07:29:14 -0400 Subject: [PATCH 183/726] media: docs: Document metadata format in struct v4l2_format The format fields in struct v4l2_format were otherwise documented but the meta field was missing. Document it. Reported-by: Hans Verkuil Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/media/uapi/v4l/dev-meta.rst | 2 +- Documentation/media/uapi/v4l/vidioc-g-fmt.rst | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst index f7ac8d0d3af1..b65dc078abeb 100644 --- a/Documentation/media/uapi/v4l/dev-meta.rst +++ b/Documentation/media/uapi/v4l/dev-meta.rst @@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the the desired operation. Both drivers and applications must set the remainder of the :c:type:`v4l2_format` structure to 0. -.. _v4l2-meta-format: +.. c:type:: v4l2_meta_format .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst index 3ead350e099f..9ea494a8faca 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst @@ -132,6 +132,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT ` must be identical - ``sdr`` - Definition of a data format, see :ref:`pixfmt`, used by SDR capture and output devices. + * - + - struct :c:type:`v4l2_meta_format` + - ``meta`` + - Definition of a metadata format, see :ref:`meta-formats`, used by + metadata capture devices. * - - __u8 - ``raw_data``\ [200] From 30efae3d789cd0714ef795545a46749236e29558 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 9 Oct 2018 07:49:49 -0400 Subject: [PATCH 184/726] media: omap3isp: Unregister media device as first While there are issues related to object lifetime management, unregister the media device first when the driver is being unbound. This is slightly safer. Signed-off-by: Sakari Ailus Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/isp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 77fb7987b42f..13f2828d880d 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1587,6 +1587,8 @@ static void isp_pm_complete(struct device *dev) static void isp_unregister_entities(struct isp_device *isp) { + media_device_unregister(&isp->media_dev); + omap3isp_csi2_unregister_entities(&isp->isp_csi2a); omap3isp_ccp2_unregister_entities(&isp->isp_ccp2); omap3isp_ccdc_unregister_entities(&isp->isp_ccdc); @@ -1597,7 +1599,6 @@ static void isp_unregister_entities(struct isp_device *isp) omap3isp_stat_unregister_entities(&isp->isp_hist); v4l2_device_unregister(&isp->v4l2_dev); - media_device_unregister(&isp->media_dev); media_device_cleanup(&isp->media_dev); } From 32388d6ef7cffc7d8291b67f8dfa26acd45217fd Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 10 Oct 2018 04:01:05 -0400 Subject: [PATCH 185/726] media: ipu3-cio2: Unregister device nodes first, then release resources While there are issues related to object lifetime management, unregister the media device first, followed immediately by other device nodes when the driver is being unbound. Only then the resources needed by the driver may be released. This is slightly safer. Signed-off-by: Sakari Ailus Tested-by: Bingbu Cao Reviewed-by: Bingbu Cao Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/intel/ipu3/ipu3-cio2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c index 452eb9b42140..723022ef3662 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -1846,12 +1846,12 @@ static void cio2_pci_remove(struct pci_dev *pci_dev) struct cio2_device *cio2 = pci_get_drvdata(pci_dev); unsigned int i; + media_device_unregister(&cio2->media_dev); cio2_notifier_exit(cio2); - cio2_fbpt_exit_dummy(cio2); for (i = 0; i < CIO2_QUEUES; i++) cio2_queue_exit(cio2, &cio2->queue[i]); + cio2_fbpt_exit_dummy(cio2); v4l2_device_unregister(&cio2->v4l2_dev); - media_device_unregister(&cio2->media_dev); media_device_cleanup(&cio2->media_dev); mutex_destroy(&cio2->lock); } From 4e26f692e2e2aa4d7d6ddb3c4d3dec17f45d6495 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 10 Oct 2018 04:04:18 -0400 Subject: [PATCH 186/726] media: ipu3-cio2: Use cio2_queues_exit The ipu3-cio2 driver has a function to tear down video devices as well as the associated video buffer queues. Use it. Signed-off-by: Sakari Ailus Tested-by: Bingbu Cao Reviewed-by: Bingbu Cao Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/intel/ipu3/ipu3-cio2.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c index 723022ef3662..447baaebca44 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -1844,12 +1844,10 @@ fail_mutex_destroy: static void cio2_pci_remove(struct pci_dev *pci_dev) { struct cio2_device *cio2 = pci_get_drvdata(pci_dev); - unsigned int i; media_device_unregister(&cio2->media_dev); cio2_notifier_exit(cio2); - for (i = 0; i < CIO2_QUEUES; i++) - cio2_queue_exit(cio2, &cio2->queue[i]); + cio2_queues_exit(cio2); cio2_fbpt_exit_dummy(cio2); v4l2_device_unregister(&cio2->v4l2_dev); media_device_cleanup(&cio2->media_dev); From 3fc202e81db70bf60beb9296eefd4e48d6304607 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 16:14:32 +0100 Subject: [PATCH 187/726] HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled asus_wmi_evaluate_method() is an empty dummy function when CONFIG_ASUS_WMI is disabled, or not reachable from a built-in device driver. This leads to a theoretical evaluation of an uninitialized variable that the compiler complains about, failing to check that the hardcoded return value makes this an unreachable code path: In file included from include/linux/printk.h:336, from include/linux/kernel.h:14, from include/linux/list.h:9, from include/linux/dmi.h:5, from drivers/hid/hid-asus.c:29: drivers/hid/hid-asus.c: In function 'asus_input_configured': include/linux/dynamic_debug.h:135:3: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/hid/hid-asus.c:359:6: note: 'value' was declared here u32 value; ^~~~~ With an extra IS_ENABLED() check, the warning goes away. Fixes: 3b692c55e58d ("HID: asus: only support backlight when it's not driven by WMI") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index dc6d6477e961..a1fa2fc8c9b5 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -359,6 +359,9 @@ static bool asus_kbd_wmi_led_control_present(struct hid_device *hdev) u32 value; int ret; + if (!IS_ENABLED(CONFIG_ASUS_WMI)) + return false; + ret = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, ASUS_WMI_DEVID_KBD_BACKLIGHT, 0, &value); hid_dbg(hdev, "WMI backlight check: rc %d value %x", ret, value); From aa9b760cec2385ad408bb2e346c7f6dc1be69a79 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 4 Nov 2018 11:32:47 +0100 Subject: [PATCH 188/726] HID: fix up .raw_event() documentation The documentation for the .raw_event() callback says that if the driver return 1, there will be no further processing of the event, but this is not true, the actual code in hid-core.c looks like this: if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) { ret = hdrv->raw_event(hid, report, data, size); if (ret < 0) goto unlock; } ret = hid_report_raw_event(hid, type, data, size, interrupt); The only return value that has any effect on the processing is a negative error. Correct this as it seems to confuse people: I found bogus code in the Razer out-of-tree driver attempting to return 1 here. Signed-off-by: Linus Walleij Signed-off-by: Jiri Kosina --- include/linux/hid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/hid.h b/include/linux/hid.h index 2827b87590d8..387c70df6f29 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -722,8 +722,8 @@ struct hid_usage_id { * input will not be passed to raw_event unless hid_device_io_start is * called. * - * raw_event and event should return 0 on no action performed, 1 when no - * further processing should be done and negative on error + * raw_event and event should return negative on error, any other value will + * pass the event on to .event() typically return 0 for success. * * input_mapping shall return a negative value to completely ignore this usage * (e.g. doubled or invalid usage), zero to continue with parsing of this From 8bd66d147c88bd441178c7b4c774ae5a185f19b8 Mon Sep 17 00:00:00 2001 From: "ndesaulniers@google.com" Date: Wed, 31 Oct 2018 12:39:01 -0700 Subject: [PATCH 189/726] include/linux/compiler*.h: define asm_volatile_goto asm_volatile_goto should also be defined for other compilers that support asm goto. Fixes commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive"). Signed-off-by: Nick Desaulniers Signed-off-by: Miguel Ojeda --- include/linux/compiler_types.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 3439d7d0249a..4a3f9c09c92d 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -130,6 +130,10 @@ struct ftrace_likely_data { # define randomized_struct_fields_end #endif +#ifndef asm_volatile_goto +#define asm_volatile_goto(x...) asm goto(x) +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) From 18354b422ce4ce1124277dfe8f4f094bae0102ad Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 23 Oct 2018 21:21:02 +0300 Subject: [PATCH 190/726] drm/i915: Don't apply the 16Gb DIMM wm latency w/a to BXT/GLK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to the appropriate platforms. This was especially harsh on GLK since we don't even try to read the DIMM information on that platforms, hence valid_dimm was always false and thus we always tried to apply the w/a. Furthermore the w/a pushed the level 0 latency above the level 1 latency, which doesn't really make sense. v2: Do the check when populating is_16gb_dimm (Mahesh) Cc: Mahesh Kumar Cc: Maarten Lankhorst Fixes: 86b592876cb6 ("drm/i915: Implement 16GB dimm wa for latency level-0") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi Reviewed-by: Mahesh Kumar (cherry picked from commit 5d6f36b27d2764f3dc940606ee6b7ec5c669af3e) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_drv.c | 15 ++++++++------- drivers/gpu/drm/i915/i915_drv.h | 1 - drivers/gpu/drm/i915/intel_pm.c | 3 +-- 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 44e2c0f5ec50..ffdbbac4400e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1175,8 +1175,6 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv) return -EINVAL; } - dram_info->valid_dimm = true; - /* * If any of the channel is single rank channel, worst case output * will be same as if single rank memory, so consider single rank @@ -1193,8 +1191,7 @@ skl_dram_get_channels_info(struct drm_i915_private *dev_priv) return -EINVAL; } - if (ch0.is_16gb_dimm || ch1.is_16gb_dimm) - dram_info->is_16gb_dimm = true; + dram_info->is_16gb_dimm = ch0.is_16gb_dimm || ch1.is_16gb_dimm; dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0, val_ch1, @@ -1314,7 +1311,6 @@ bxt_get_dram_info(struct drm_i915_private *dev_priv) return -EINVAL; } - dram_info->valid_dimm = true; dram_info->valid = true; return 0; } @@ -1327,12 +1323,17 @@ intel_get_dram_info(struct drm_i915_private *dev_priv) int ret; dram_info->valid = false; - dram_info->valid_dimm = false; - dram_info->is_16gb_dimm = false; dram_info->rank = I915_DRAM_RANK_INVALID; dram_info->bandwidth_kbps = 0; dram_info->num_channels = 0; + /* + * Assume 16Gb DIMMs are present until proven otherwise. + * This is only used for the level 0 watermark latency + * w/a which does not apply to bxt/glk. + */ + dram_info->is_16gb_dimm = !IS_GEN9_LP(dev_priv); + if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv)) return; diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8624b4bdc242..9102571e9692 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1948,7 +1948,6 @@ struct drm_i915_private { struct dram_info { bool valid; - bool valid_dimm; bool is_16gb_dimm; u8 num_channels; enum dram_rank { diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1db9b8328275..245f0022bcfd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2881,8 +2881,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv, * any underrun. If not able to get Dimm info assume 16GB dimm * to avoid any underrun. */ - if (!dev_priv->dram_info.valid_dimm || - dev_priv->dram_info.is_16gb_dimm) + if (dev_priv->dram_info.is_16gb_dimm) wm[0] += 1; } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { From 6503493145cba4413ecd3d4d153faeef4a1e9b85 Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Thu, 25 Oct 2018 11:52:00 -0700 Subject: [PATCH 191/726] drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Clint Taylor Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_audio.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 769f3f586661..ee3ca2de983b 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -144,6 +144,9 @@ static const struct { /* HDMI N/CTS table */ #define TMDS_297M 297000 #define TMDS_296M 296703 +#define TMDS_594M 594000 +#define TMDS_593M 593407 + static const struct { int sample_rate; int clock; @@ -164,6 +167,20 @@ static const struct { { 176400, TMDS_297M, 18816, 247500 }, { 192000, TMDS_296M, 23296, 281250 }, { 192000, TMDS_297M, 20480, 247500 }, + { 44100, TMDS_593M, 8918, 937500 }, + { 44100, TMDS_594M, 9408, 990000 }, + { 48000, TMDS_593M, 5824, 562500 }, + { 48000, TMDS_594M, 6144, 594000 }, + { 32000, TMDS_593M, 5824, 843750 }, + { 32000, TMDS_594M, 3072, 445500 }, + { 88200, TMDS_593M, 17836, 937500 }, + { 88200, TMDS_594M, 18816, 990000 }, + { 96000, TMDS_593M, 11648, 562500 }, + { 96000, TMDS_594M, 12288, 594000 }, + { 176400, TMDS_593M, 35672, 937500 }, + { 176400, TMDS_594M, 37632, 990000 }, + { 192000, TMDS_593M, 23296, 562500 }, + { 192000, TMDS_594M, 24576, 594000 }, }; /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ From c58281056a8b26d5d9dc15c19859a7880835ef44 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 25 Oct 2018 10:18:22 +0100 Subject: [PATCH 192/726] drm/i915: Mark up GTT sizes as u64 Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by: Sergii Romantsov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk (cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- drivers/gpu/drm/i915/i915_gem_gtt.h | 6 +++--- drivers/gpu/drm/i915/selftests/huge_pages.c | 2 +- drivers/gpu/drm/i915/selftests/i915_gem_gtt.c | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 56c7f8637311..47c302543799 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1757,7 +1757,7 @@ static void gen6_dump_ppgtt(struct i915_hw_ppgtt *base, struct seq_file *m) if (i == 4) continue; - seq_printf(m, "\t\t(%03d, %04d) %08lx: ", + seq_printf(m, "\t\t(%03d, %04d) %08llx: ", pde, pte, (pde * GEN6_PTES + pte) * I915_GTT_PAGE_SIZE); for (i = 0; i < 4; i++) { diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index 7e2af5f4f39b..aa8307043036 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -42,9 +42,9 @@ #include "i915_selftest.h" #include "i915_timeline.h" -#define I915_GTT_PAGE_SIZE_4K BIT(12) -#define I915_GTT_PAGE_SIZE_64K BIT(16) -#define I915_GTT_PAGE_SIZE_2M BIT(21) +#define I915_GTT_PAGE_SIZE_4K BIT_ULL(12) +#define I915_GTT_PAGE_SIZE_64K BIT_ULL(16) +#define I915_GTT_PAGE_SIZE_2M BIT_ULL(21) #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M diff --git a/drivers/gpu/drm/i915/selftests/huge_pages.c b/drivers/gpu/drm/i915/selftests/huge_pages.c index 8d03f64eabd7..5c22f2c8d4cf 100644 --- a/drivers/gpu/drm/i915/selftests/huge_pages.c +++ b/drivers/gpu/drm/i915/selftests/huge_pages.c @@ -551,7 +551,7 @@ static int igt_mock_ppgtt_misaligned_dma(void *arg) err = igt_check_page_sizes(vma); if (vma->page_sizes.gtt != I915_GTT_PAGE_SIZE_4K) { - pr_err("page_sizes.gtt=%u, expected %lu\n", + pr_err("page_sizes.gtt=%u, expected %llu\n", vma->page_sizes.gtt, I915_GTT_PAGE_SIZE_4K); err = -EINVAL; } diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c index 8e2e269db97e..127d81513671 100644 --- a/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/selftests/i915_gem_gtt.c @@ -1337,7 +1337,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != total || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, total, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; @@ -1386,7 +1386,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != total || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, total, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; @@ -1430,7 +1430,7 @@ static int igt_gtt_reserve(void *arg) GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); if (vma->node.start != offset || vma->node.size != 2*I915_GTT_PAGE_SIZE) { - pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %lx)\n", + pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n", vma->node.start, vma->node.size, offset, 2*I915_GTT_PAGE_SIZE); err = -EINVAL; From 085603287452fc96376ed4888bf29f8c095d2b40 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 25 Oct 2018 10:18:23 +0100 Subject: [PATCH 193/726] drm/i915: Compare user's 64b GTT offset even on 32b Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/gvt/gtt.h | 1 - drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +- drivers/gpu/drm/i915/i915_gem_gtt.h | 2 ++ 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index 7a9b36176efb..bfb6f652b09f 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -35,7 +35,6 @@ #define _GVT_GTT_H_ #define I915_GTT_PAGE_SHIFT 12 -#define I915_GTT_PAGE_MASK (~(I915_GTT_PAGE_SIZE - 1)) struct intel_vgpu_mm; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 09187286d346..1aaccbe7e1de 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -460,7 +460,7 @@ eb_validate_vma(struct i915_execbuffer *eb, * any non-page-aligned or non-canonical addresses. */ if (unlikely(entry->flags & EXEC_OBJECT_PINNED && - entry->offset != gen8_canonical_addr(entry->offset & PAGE_MASK))) + entry->offset != gen8_canonical_addr(entry->offset & I915_GTT_PAGE_MASK))) return -EINVAL; /* pad_to_size was once a reserved field, so sanitize it */ diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index aa8307043036..5d2c5ba55ad8 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -49,6 +49,8 @@ #define I915_GTT_PAGE_SIZE I915_GTT_PAGE_SIZE_4K #define I915_GTT_MAX_PAGE_SIZE I915_GTT_PAGE_SIZE_2M +#define I915_GTT_PAGE_MASK -I915_GTT_PAGE_SIZE + #define I915_GTT_MIN_ALIGNMENT I915_GTT_PAGE_SIZE #define I915_FENCE_REG_NONE -1 From 2c2f6e30d5f29691e3563d334ce208d3a1907f49 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 25 Oct 2018 17:56:36 -0700 Subject: [PATCH 194/726] drm/i915/glk: Remove 99% limitation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä Cc: Madhav Chauhan Cc: Jani Nikula Cc: Clinton Taylor Cc: Arthur J Runyan Signed-off-by: Rodrigo Vivi Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com (cherry picked from commit 42882336e62aab00278114392a16374f272a0c99) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_cdclk.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c index 29075c763428..8d74276029e6 100644 --- a/drivers/gpu/drm/i915/intel_cdclk.c +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -2138,16 +2138,8 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv, int pixel_rate) { - if (INTEL_GEN(dev_priv) >= 10) + if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) return DIV_ROUND_UP(pixel_rate, 2); - else if (IS_GEMINILAKE(dev_priv)) - /* - * FIXME: Avoid using a pixel clock that is more than 99% of the cdclk - * as a temporary workaround. Use a higher cdclk instead. (Note that - * intel_compute_max_dotclk() limits the max pixel clock to 99% of max - * cdclk.) - */ - return DIV_ROUND_UP(pixel_rate * 100, 2 * 99); else if (IS_GEN9(dev_priv) || IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) return pixel_rate; @@ -2543,14 +2535,8 @@ static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) { int max_cdclk_freq = dev_priv->max_cdclk_freq; - if (INTEL_GEN(dev_priv) >= 10) + if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) return 2 * max_cdclk_freq; - else if (IS_GEMINILAKE(dev_priv)) - /* - * FIXME: Limiting to 99% as a temporary workaround. See - * intel_min_cdclk() for details. - */ - return 2 * max_cdclk_freq * 99 / 100; else if (IS_GEN9(dev_priv) || IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) return max_cdclk_freq; From 76271ef2638ca8e4bf2884cad664a34be0d5a42b Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Fri, 5 Oct 2018 11:56:42 -0700 Subject: [PATCH 195/726] drm/i915: Fix VIDEO_DIP_CTL bit shifts The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare Cc: Anusha Srivatsa Cc: Rodrigo Vivi Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Manasi Navare Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com (cherry picked from commit 09209662618f9fdc38b8d4da39040c8829fd2d57) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_reg.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 7c491ea3d052..f2d92aee721b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4593,12 +4593,12 @@ enum { #define DRM_DIP_ENABLE (1 << 28) #define PSR_VSC_BIT_7_SET (1 << 27) -#define VSC_SELECT_MASK (0x3 << 26) -#define VSC_SELECT_SHIFT 26 -#define VSC_DIP_HW_HEA_DATA (0 << 26) -#define VSC_DIP_HW_HEA_SW_DATA (1 << 26) -#define VSC_DIP_HW_DATA_SW_HEA (2 << 26) -#define VSC_DIP_SW_HEA_DATA (3 << 26) +#define VSC_SELECT_MASK (0x3 << 25) +#define VSC_SELECT_SHIFT 25 +#define VSC_DIP_HW_HEA_DATA (0 << 25) +#define VSC_DIP_HW_HEA_SW_DATA (1 << 25) +#define VSC_DIP_HW_DATA_SW_HEA (2 << 25) +#define VSC_DIP_SW_HEA_DATA (3 << 25) #define VDIP_ENABLE_PPS (1 << 24) /* Panel power sequencing */ From f42f343887016330b321dd40eebc68c7292e4f1b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 29 Oct 2018 16:00:31 +0200 Subject: [PATCH 196/726] drm/i915: Fix error handling for the NV12 fb dimensions check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Cc: Vidya Srinivas Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper (cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9741cc419e1b..b8dfdbc9ca1f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14646,7 +14646,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb, fb->height < SKL_MIN_YUV_420_SRC_H || (fb->width % 4) != 0 || (fb->height % 4) != 0)) { DRM_DEBUG_KMS("src dimensions not correct for NV12\n"); - return -EINVAL; + goto err; } for (i = 0; i < fb->format->num_planes; i++) { From e528c2affcf216b3d02b22004895cb678769629b Mon Sep 17 00:00:00 2001 From: Manasi Navare Date: Tue, 23 Oct 2018 12:12:47 -0700 Subject: [PATCH 197/726] drm/i915/icl: Fix the macros for DFLEXDPMLE register bits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna Cc: Paulo Zanoni Cc: Jose Roberto de Souza Cc: # v4.19+ Signed-off-by: Manasi Navare Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_reg.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f2d92aee721b..e31c27e45734 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2095,8 +2095,12 @@ enum i915_power_well_id { /* ICL PHY DFLEX registers */ #define PORT_TX_DFLEXDPMLE1 _MMIO(0x1638C0) -#define DFLEXDPMLE1_DPMLETC_MASK(n) (0xf << (4 * (n))) -#define DFLEXDPMLE1_DPMLETC(n, x) ((x) << (4 * (n))) +#define DFLEXDPMLE1_DPMLETC_MASK(tc_port) (0xf << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML0(tc_port) (1 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML1_0(tc_port) (3 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3(tc_port) (8 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) (12 << (4 * (tc_port))) +#define DFLEXDPMLE1_DPMLETC_ML3_0(tc_port) (15 << (4 * (tc_port))) /* BXT PHY Ref registers */ #define _PORT_REF_DW3_A 0x16218C From 0014868b9c3c1dda1de6711cf58c3486fb422d07 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 2 Nov 2018 16:12:09 +0000 Subject: [PATCH 198/726] drm/i915: Mark pin flags as u64 Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by: Sergii Romantsov Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Lionel Landwerlin Reviewed-by: Michal Wajdeczko Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_gtt.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.h b/drivers/gpu/drm/i915/i915_gem_gtt.h index 5d2c5ba55ad8..28039290655c 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.h +++ b/drivers/gpu/drm/i915/i915_gem_gtt.h @@ -661,20 +661,20 @@ int i915_gem_gtt_insert(struct i915_address_space *vm, u64 start, u64 end, unsigned int flags); /* Flags used by pin/bind&friends. */ -#define PIN_NONBLOCK BIT(0) -#define PIN_MAPPABLE BIT(1) -#define PIN_ZONE_4G BIT(2) -#define PIN_NONFAULT BIT(3) -#define PIN_NOEVICT BIT(4) +#define PIN_NONBLOCK BIT_ULL(0) +#define PIN_MAPPABLE BIT_ULL(1) +#define PIN_ZONE_4G BIT_ULL(2) +#define PIN_NONFAULT BIT_ULL(3) +#define PIN_NOEVICT BIT_ULL(4) -#define PIN_MBZ BIT(5) /* I915_VMA_PIN_OVERFLOW */ -#define PIN_GLOBAL BIT(6) /* I915_VMA_GLOBAL_BIND */ -#define PIN_USER BIT(7) /* I915_VMA_LOCAL_BIND */ -#define PIN_UPDATE BIT(8) +#define PIN_MBZ BIT_ULL(5) /* I915_VMA_PIN_OVERFLOW */ +#define PIN_GLOBAL BIT_ULL(6) /* I915_VMA_GLOBAL_BIND */ +#define PIN_USER BIT_ULL(7) /* I915_VMA_LOCAL_BIND */ +#define PIN_UPDATE BIT_ULL(8) -#define PIN_HIGH BIT(9) -#define PIN_OFFSET_BIAS BIT(10) -#define PIN_OFFSET_FIXED BIT(11) +#define PIN_HIGH BIT_ULL(9) +#define PIN_OFFSET_BIAS BIT_ULL(10) +#define PIN_OFFSET_FIXED BIT_ULL(11) #define PIN_OFFSET_MASK (-I915_GTT_PAGE_SIZE) #endif From 6a8915d0f8cf323e1beb792a33095cf652db4056 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 5 Nov 2018 21:46:04 +0200 Subject: [PATCH 199/726] drm/i915: Don't oops during modeset shutdown after lpe audio deinit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_lpe_audio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index cdf19553ffac..5d5336fbe7b0 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -297,8 +297,10 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) lpe_audio_platdev_destroy(dev_priv); irq_free_desc(dev_priv->lpe_audio.irq); -} + dev_priv->lpe_audio.irq = -1; + dev_priv->lpe_audio.platdev = NULL; +} /** * intel_lpe_audio_notify() - notify lpe audio event From 5e93a125f521efd00d71af31c2a301f3d46af48c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Nov 2018 12:28:07 +0100 Subject: [PATCH 200/726] ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks Since the commit c647f806b8c2 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") we allow enabling the mic mute LED with multiple ADCs. The commit changed the function return value to be zero or a negative error, while this change was overlooked in the thinkpad_acpi helper code where it still expects a positive return value for success. This eventually leads to a NULL dereference on a system that has only a mic mute LED. This patch corrects the return value check in the corresponding code as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201621 Fixes: c647f806b8c2 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/thinkpad_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c index 97f49b751e6e..568575b72f2f 100644 --- a/sound/pci/hda/thinkpad_helper.c +++ b/sound/pci/hda/thinkpad_helper.c @@ -58,8 +58,8 @@ static void hda_fixup_thinkpad_acpi(struct hda_codec *codec, removefunc = false; } if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0 && - snd_hda_gen_add_micmute_led(codec, - update_tpacpi_micmute) > 0) + !snd_hda_gen_add_micmute_led(codec, + update_tpacpi_micmute)) removefunc = false; } From 506481b20e818db40b6198815904ecd2d6daee64 Mon Sep 17 00:00:00 2001 From: Robbie Ko Date: Tue, 30 Oct 2018 18:04:04 +0800 Subject: [PATCH 201/726] Btrfs: fix cur_offset in the error case for nocow When the cow_file_range fails, the related resources are unlocked according to the range [start..end), so the unlock cannot be repeated in run_delalloc_nocow. In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is not updated correctly, so move the cur_offset update before cow_file_range. kernel BUG at mm/page-writeback.c:2663! Internal error: Oops - BUG: 0 [#1] SMP CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O Hardware name: Realtek_RTD1296 (DT) Workqueue: writeback wb_workfn (flush-btrfs-1) task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000 PC is at clear_page_dirty_for_io+0x1bc/0x1e8 LR is at clear_page_dirty_for_io+0x14/0x1e8 pc : [] lr : [] pstate: 40000145 sp : ffffffc02e9af4f0 Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020) Call trace: [] clear_page_dirty_for_io+0x1bc/0x1e8 [] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs] [] run_delalloc_nocow+0x3b8/0x948 [btrfs] [] run_delalloc_range+0x250/0x3a8 [btrfs] [] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs] [] __extent_writepage+0xe8/0x248 [btrfs] [] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs] [] extent_writepages+0x48/0x68 [btrfs] [] btrfs_writepages+0x20/0x30 [btrfs] [] do_writepages+0x30/0x88 [] __writeback_single_inode+0x34/0x198 [] writeback_sb_inodes+0x184/0x3c0 [] __writeback_inodes_wb+0x6c/0xc0 [] wb_writeback+0x1b8/0x1c0 [] wb_workfn+0x150/0x250 [] process_one_work+0x1dc/0x388 [] worker_thread+0x130/0x500 [] kthread+0x10c/0x110 [] ret_from_fork+0x10/0x40 Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000) CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Robbie Ko Signed-off-by: David Sterba --- fs/btrfs/inode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f4d31fd62eed..55761b1519f5 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1531,12 +1531,11 @@ out_check: } btrfs_release_path(path); - if (cur_offset <= end && cow_start == (u64)-1) { + if (cur_offset <= end && cow_start == (u64)-1) cow_start = cur_offset; - cur_offset = end; - } if (cow_start != (u64)-1) { + cur_offset = end; ret = cow_file_range(inode, locked_page, cow_start, end, end, page_started, nr_written, 1, NULL); if (ret) From fcd5e74288f7d36991b1f0fb96b8c57079645e38 Mon Sep 17 00:00:00 2001 From: Lu Fengqi Date: Wed, 24 Oct 2018 20:24:03 +0800 Subject: [PATCH 202/726] btrfs: fix pinned underflow after transaction aborted When running generic/475, we may get the following warning in dmesg: [ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8 [ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286 [ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007 [ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74 [ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000 [ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88 [ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100 [ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000 [ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0 [ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6902.137836] Call Trace: [ 6902.138939] close_ctree+0x171/0x330 [btrfs] [ 6902.140181] ? kthread_stop+0x146/0x1f0 [ 6902.141277] generic_shutdown_super+0x6c/0x100 [ 6902.142517] kill_anon_super+0x14/0x30 [ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs] [ 6902.144790] deactivate_locked_super+0x2f/0x70 [ 6902.146014] cleanup_mnt+0x3b/0x70 [ 6902.147020] task_work_run+0x9e/0xd0 [ 6902.148036] do_syscall_64+0x470/0x600 [ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 6902.151640] RIP: 0033:0x7f45077a6a7b [ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b [ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490 [ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0 [ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490 [ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8 [ 6902.167553] irq event stamp: 0 [ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 6902.170731] hardirqs last disabled at (0): [] copy_process.part.55+0x3b0/0x1f00 [ 6902.172773] softirqs last enabled at (0): [] copy_process.part.55+0x3b0/0x1f00 [ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null) [ 6902.176407] ---[ end trace 463138c2986b275c ]--- [ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full [ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536 In the above line there's "pinned=18446744073708158976" which is an unsigned u64 value of -1392640, an obvious underflow. When transaction_kthread is running cleanup_transaction(), another fsstress is running btrfs_commit_transaction(). The btrfs_finish_extent_commit() may get the same range as btrfs_destroy_pinned_extent() got, which causes the pinned underflow. Fixes: d4b450cd4b33 ("Btrfs: fix race between transaction commit and empty block group removal") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Lu Fengqi Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b0ab41da91d1..00ee5e37e989 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4359,13 +4359,23 @@ static int btrfs_destroy_pinned_extent(struct btrfs_fs_info *fs_info, unpin = pinned_extents; again: while (1) { + /* + * The btrfs_finish_extent_commit() may get the same range as + * ours between find_first_extent_bit and clear_extent_dirty. + * Hence, hold the unused_bg_unpin_mutex to avoid double unpin + * the same extent range. + */ + mutex_lock(&fs_info->unused_bg_unpin_mutex); ret = find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY, NULL); - if (ret) + if (ret) { + mutex_unlock(&fs_info->unused_bg_unpin_mutex); break; + } clear_extent_dirty(unpin, start, end); btrfs_error_unpin_extent_range(fs_info, start, end); + mutex_unlock(&fs_info->unused_bg_unpin_mutex); cond_resched(); } From 008c6753f7e070c77c70d708a6bf0255b4381763 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 29 Oct 2018 09:42:06 +0000 Subject: [PATCH 203/726] Btrfs: fix missing data checksums after a ranged fsync (msync) Recently we got a massive simplification for fsync, where for the fast path we no longer log new extents while their respective ordered extents are still running. However that simplification introduced a subtle regression for the case where we use a ranged fsync (msync). Consider the following example: CPU 0 CPU 1 mmap write to range [2Mb, 4Mb[ mmap write to range [512Kb, 1Mb[ msync range [512K, 1Mb[ --> triggers fast fsync (BTRFS_INODE_NEEDS_FULL_SYNC not set) --> creates extent map A for this range and adds it to list of modified extents --> starts ordered extent A for this range --> waits for it to complete writeback triggered for range [2Mb, 4Mb[ --> create extent map B and adds it to the list of modified extents --> creates ordered extent B --> start looking for and logging modified extents --> logs extent maps A and B --> finds checksums for extent A in the csum tree, but not for extent B fsync (msync) finishes --> ordered extent B finishes and its checksums are added to the csum tree After replaying the log, we have the extent covering the range [2Mb, 4Mb[ but do not have the data checksum items covering that file range. This happens because at the very beginning of an fsync (btrfs_sync_file()) we start and wait for IO in the given range [512Kb, 1Mb[ and therefore wait for any ordered extents in that range to complete before we start logging the extents. However if right before we start logging the extent in our range [512Kb, 1Mb[, writeback is started for any other dirty range, such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync or msync (btrfs_sync_file() starts writeback before acquiring the inode's lock), an ordered extent is created for that other range and a new extent map is created to represent that range and added to the inode's list of modified extents. That means that we will see that other extent in that list when collecting extents for logging (done at btrfs_log_changed_extents()) and log the extent before the respective ordered extent finishes - namely before the checksum items are added to the checksums tree, which is where log_extent_csums() looks for the checksums, therefore making us log an extent without logging its checksums. Before that massive simplification of fsync, this wasn't a problem because besides looking for checkums in the checksums tree, we also looked for them in any ordered extent still running. The consequence of data checksums missing for a file range is that users attempting to read the affected file range will get -EIO errors and dmesg reports the following: [10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344 [10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1 So fix this by skipping extents outside of our logging range at btrfs_log_changed_extents() and leaving them on the list of modified extents so that any subsequent ranged fsync may collect them if needed. Also, if we find a hole extent outside of the range still log it, just to prevent having gaps between extent items after replaying the log, otherwise fsck will complain when we are not using the NO_HOLES feature (fstest btrfs/056 triggers such case). Fixes: e7175a692765 ("btrfs: remove the wait ordered logic in the log_one_extent path") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index e07f3376b7df..a5ce99a6c936 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -4396,6 +4396,23 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans, logged_end = end; list_for_each_entry_safe(em, n, &tree->modified_extents, list) { + /* + * Skip extents outside our logging range. It's important to do + * it for correctness because if we don't ignore them, we may + * log them before their ordered extent completes, and therefore + * we could log them without logging their respective checksums + * (the checksum items are added to the csum tree at the very + * end of btrfs_finish_ordered_io()). Also leave such extents + * outside of our range in the list, since we may have another + * ranged fsync in the near future that needs them. If an extent + * outside our range corresponds to a hole, log it to avoid + * leaving gaps between extents (fsck will complain when we are + * not using the NO_HOLES feature). + */ + if ((em->start > end || em->start + em->len <= start) && + em->block_start != EXTENT_MAP_HOLE) + continue; + list_del_init(&em->list); /* * Just an arbitrary number, this can be really CPU intensive From 761333f2f50ccc887aa9957ae829300262c0d15b Mon Sep 17 00:00:00 2001 From: Shaokun Zhang Date: Mon, 5 Nov 2018 18:49:09 +0800 Subject: [PATCH 204/726] btrfs: tree-checker: Fix misleading group system information block_group_err shows the group system as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: fce466eab7ac6 ("btrfs: tree-checker: Verify block_group_item") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Nikolay Borisov Reviewed-by: Qu Wenruo Signed-off-by: Shaokun Zhang Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/tree-checker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index cab0b1f1f741..efcf89a8ba44 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -440,7 +440,7 @@ static int check_block_group_item(struct btrfs_fs_info *fs_info, type != (BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA)) { block_group_err(fs_info, leaf, slot, -"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llu or 0x%llx", +"invalid type, have 0x%llx (%lu bits set) expect either 0x%llx, 0x%llx, 0x%llx or 0x%llx", type, hweight64(type), BTRFS_BLOCK_GROUP_DATA, BTRFS_BLOCK_GROUP_METADATA, BTRFS_BLOCK_GROUP_SYSTEM, From 7e17916b35797396f681a3270245fd29c1e4c250 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 3 Nov 2018 16:39:28 +0100 Subject: [PATCH 205/726] btrfs: avoid link error with CONFIG_NO_AUTO_INLINE Note: this patch fixes a problem in a feature outside of btrfs ("kernel hacking: add a config option to disable compiler auto-inlining") and is applied ahead of time due to cross-subsystem dependencies. On 32-bit ARM with gcc-8, I see a link error with the addition of the CONFIG_NO_AUTO_INLINE option: fs/btrfs/super.o: In function `btrfs_statfs': super.c:(.text+0x67b8): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x67fc): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x6858): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x6920): undefined reference to `__aeabi_uldivmod' super.c:(.text+0x693c): undefined reference to `__aeabi_uldivmod' fs/btrfs/super.o:super.c:(.text+0x6958): more undefined references to `__aeabi_uldivmod' follow So far this is the only file that shows the behavior, so I'd propose to just work around it by marking the functions as 'static inline' that normally get inlined here. The reference to __aeabi_uldivmod comes from a div_u64() which has an optimization for a constant division that uses a straight '/' operator when the result should be known to the compiler. My interpretation is that as we turn off inlining, gcc still expects the result to be constant but fails to use that constant value. Link: https://lkml.kernel.org/r/20181103153941.1881966-1-arnd@arndb.de Reviewed-by: Nikolay Borisov Reviewed-by: Changbin Du Signed-off-by: Arnd Bergmann [ add the note ] Signed-off-by: David Sterba --- fs/btrfs/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index b362b45dd757..cbc9d0d2c12d 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1916,7 +1916,7 @@ restore: } /* Used to sort the devices by max_avail(descending sort) */ -static int btrfs_cmp_device_free_bytes(const void *dev_info1, +static inline int btrfs_cmp_device_free_bytes(const void *dev_info1, const void *dev_info2) { if (((struct btrfs_device_info *)dev_info1)->max_avail > @@ -1945,8 +1945,8 @@ static inline void btrfs_descending_sort_devices( * The helper to calc the free space on the devices that can be used to store * file data. */ -static int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info, - u64 *free_bytes) +static inline int btrfs_calc_avail_data_space(struct btrfs_fs_info *fs_info, + u64 *free_bytes) { struct btrfs_device_info *devices_info; struct btrfs_fs_devices *fs_devices = fs_info->fs_devices; From 4222ea7100c0e37adace2790c8822758bbeee179 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 24 Oct 2018 10:13:03 +0100 Subject: [PATCH 206/726] Btrfs: fix deadlock on tree root leaf when finding free extent When we are writing out a free space cache, during the transaction commit phase, we can end up in a deadlock which results in a stack trace like the following: schedule+0x28/0x80 btrfs_tree_read_lock+0x8e/0x120 [btrfs] ? finish_wait+0x80/0x80 btrfs_read_lock_root_node+0x2f/0x40 [btrfs] btrfs_search_slot+0xf6/0x9f0 [btrfs] ? evict_refill_and_join+0xd0/0xd0 [btrfs] ? inode_insert5+0x119/0x190 btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_iget+0x113/0x690 [btrfs] __lookup_free_space_inode+0xd8/0x150 [btrfs] lookup_free_space_inode+0x5b/0xb0 [btrfs] load_free_space_cache+0x7c/0x170 [btrfs] ? cache_block_group+0x72/0x3b0 [btrfs] cache_block_group+0x1b3/0x3b0 [btrfs] ? finish_wait+0x80/0x80 find_free_extent+0x799/0x1010 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0x1b3/0x4f0 [btrfs] __btrfs_cow_block+0x11d/0x500 [btrfs] btrfs_cow_block+0xdc/0x180 [btrfs] btrfs_search_slot+0x3bd/0x9f0 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_update_inode_item+0x46/0x100 [btrfs] cache_save_setup+0xe4/0x3a0 [btrfs] btrfs_start_dirty_block_groups+0x1be/0x480 [btrfs] btrfs_commit_transaction+0xcb/0x8b0 [btrfs] At cache_save_setup() we need to update the inode item of a block group's cache which is located in the tree root (fs_info->tree_root), which means that it may result in COWing a leaf from that tree. If that happens we need to find a free metadata extent and while looking for one, if we find a block group which was not cached yet we attempt to load its cache by calling cache_block_group(). However this function will try to load the inode of the free space cache, which requires finding the matching inode item in the tree root - if that inode item is located in the same leaf as the inode item of the space cache we are updating at cache_save_setup(), we end up in a deadlock, since we try to obtain a read lock on the same extent buffer that we previously write locked. So fix this by using the tree root's commit root when searching for a block group's free space cache inode item when we are attempting to load a free space cache. This is safe since block groups once loaded stay in memory forever, as well as their caches, so after they are first loaded we will never need to read their inode items again. For new block groups, once they are created they get their ->cached field set to BTRFS_CACHE_FINISHED meaning we will not need to read their inode item. Reported-by: Andrew Nelson Link: https://lore.kernel.org/linux-btrfs/CAPTELenq9x5KOWuQ+fa7h1r3nsJG8vyiTH8+ifjURc_duHh2Wg@mail.gmail.com/ Fixes: 9d66e233c704 ("Btrfs: load free space cache if it exists") Tested-by: Andrew Nelson Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 3 +++ fs/btrfs/free-space-cache.c | 22 +++++++++++++++++++++- fs/btrfs/inode.c | 32 ++++++++++++++++++++++---------- 3 files changed, 46 insertions(+), 11 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 68ca41dbbef3..f7f955109d8b 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3163,6 +3163,9 @@ void btrfs_destroy_inode(struct inode *inode); int btrfs_drop_inode(struct inode *inode); int __init btrfs_init_cachep(void); void __cold btrfs_destroy_cachep(void); +struct inode *btrfs_iget_path(struct super_block *s, struct btrfs_key *location, + struct btrfs_root *root, int *new, + struct btrfs_path *path); struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, struct btrfs_root *root, int *was_new); struct extent_map *btrfs_get_extent(struct btrfs_inode *inode, diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 4ba0aedc878b..74aa552f4793 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -75,7 +75,8 @@ static struct inode *__lookup_free_space_inode(struct btrfs_root *root, * sure NOFS is set to keep us from deadlocking. */ nofs_flag = memalloc_nofs_save(); - inode = btrfs_iget(fs_info->sb, &location, root, NULL); + inode = btrfs_iget_path(fs_info->sb, &location, root, NULL, path); + btrfs_release_path(path); memalloc_nofs_restore(nofs_flag); if (IS_ERR(inode)) return inode; @@ -838,6 +839,25 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, path->search_commit_root = 1; path->skip_locking = 1; + /* + * We must pass a path with search_commit_root set to btrfs_iget in + * order to avoid a deadlock when allocating extents for the tree root. + * + * When we are COWing an extent buffer from the tree root, when looking + * for a free extent, at extent-tree.c:find_free_extent(), we can find + * block group without its free space cache loaded. When we find one + * we must load its space cache which requires reading its free space + * cache's inode item from the root tree. If this inode item is located + * in the same leaf that we started COWing before, then we end up in + * deadlock on the extent buffer (trying to read lock it when we + * previously write locked it). + * + * It's safe to read the inode item using the commit root because + * block groups, once loaded, stay in memory forever (until they are + * removed) as well as their space caches once loaded. New block groups + * once created get their ->cached field set to BTRFS_CACHE_FINISHED so + * we will never try to read their inode item while the fs is mounted. + */ inode = lookup_free_space_inode(fs_info, block_group, path); if (IS_ERR(inode)) { btrfs_free_path(path); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 55761b1519f5..e71daadd2f75 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3569,10 +3569,11 @@ static noinline int acls_after_inode_item(struct extent_buffer *leaf, /* * read an inode from the btree into the in-memory inode */ -static int btrfs_read_locked_inode(struct inode *inode) +static int btrfs_read_locked_inode(struct inode *inode, + struct btrfs_path *in_path) { struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); - struct btrfs_path *path; + struct btrfs_path *path = in_path; struct extent_buffer *leaf; struct btrfs_inode_item *inode_item; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -3588,15 +3589,18 @@ static int btrfs_read_locked_inode(struct inode *inode) if (!ret) filled = true; - path = btrfs_alloc_path(); - if (!path) - return -ENOMEM; + if (!path) { + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + } memcpy(&location, &BTRFS_I(inode)->location, sizeof(location)); ret = btrfs_lookup_inode(NULL, root, path, &location, 0); if (ret) { - btrfs_free_path(path); + if (path != in_path) + btrfs_free_path(path); return ret; } @@ -3721,7 +3725,8 @@ cache_acl: btrfs_ino(BTRFS_I(inode)), root->root_key.objectid, ret); } - btrfs_free_path(path); + if (path != in_path) + btrfs_free_path(path); if (!maybe_acls) cache_no_acl(inode); @@ -5643,8 +5648,9 @@ static struct inode *btrfs_iget_locked(struct super_block *s, /* Get an inode object given its location and corresponding root. * Returns in *is_new if the inode was read from disk */ -struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, - struct btrfs_root *root, int *new) +struct inode *btrfs_iget_path(struct super_block *s, struct btrfs_key *location, + struct btrfs_root *root, int *new, + struct btrfs_path *path) { struct inode *inode; @@ -5655,7 +5661,7 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, if (inode->i_state & I_NEW) { int ret; - ret = btrfs_read_locked_inode(inode); + ret = btrfs_read_locked_inode(inode, path); if (!ret) { inode_tree_add(inode); unlock_new_inode(inode); @@ -5677,6 +5683,12 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, return inode; } +struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, + struct btrfs_root *root, int *new) +{ + return btrfs_iget_path(s, location, root, new, NULL); +} + static struct inode *new_simple_dir(struct super_block *s, struct btrfs_key *key, struct btrfs_root *root) From 11023d3f5fdf89bba5e1142127701ca6e6014587 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 5 Nov 2018 11:14:05 +0000 Subject: [PATCH 207/726] Btrfs: fix infinite loop on inode eviction after deduplication of eof block If we attempt to deduplicate the last block of a file A into the middle of a file B, and file A's size is not a multiple of the block size, we end rounding the deduplication length to 0 bytes, to avoid the data corruption issue fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when deduplicating between different files"). However a length of zero will cause the insertion of an extent state with a start value greater (by 1) then the end value, leading to a corrupt extent state that will trigger a warning and cause chaos such as an infinite loop during inode eviction. Example trace: [96049.833585] ------------[ cut here ]------------ [96049.833714] WARNING: CPU: 0 PID: 24448 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.833767] CPU: 0 PID: 24448 Comm: xfs_io Not tainted 4.19.0-rc7-btrfs-next-39 #1 [96049.833768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.833780] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.833783] RSP: 0018:ffffafd2c3707af0 EFLAGS: 00010282 [96049.833785] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.833786] RDX: 0000000000000007 RSI: ffff99045c143230 RDI: ffff99047b2168a0 [96049.833787] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.833787] R10: ffffafd2c3707ab8 R11: 0000000000000000 R12: ffff9903b93b12c8 [96049.833788] R13: 000000000004e000 R14: ffffafd2c3707b80 R15: ffffafd2c3707b78 [96049.833790] FS: 00007f5c14e7d700(0000) GS:ffff99047b200000(0000) knlGS:0000000000000000 [96049.833791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.833792] CR2: 00007f5c146abff8 CR3: 0000000115f4c004 CR4: 00000000003606f0 [96049.833795] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.833796] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.833796] Call Trace: [96049.833809] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.833823] lock_extent_bits+0x6b/0x210 [btrfs] [96049.833831] ? _raw_spin_unlock+0x24/0x30 [96049.833841] ? test_range_bit+0xdf/0x130 [btrfs] [96049.833853] lock_extent_range+0x8e/0x150 [btrfs] [96049.833864] btrfs_double_extent_lock+0x78/0xb0 [btrfs] [96049.833875] btrfs_extent_same_range+0x14e/0x550 [btrfs] [96049.833885] ? rcu_read_lock_sched_held+0x3f/0x70 [96049.833890] ? __kmalloc_node+0x2b0/0x2f0 [96049.833899] ? btrfs_dedupe_file_range+0x19a/0x280 [btrfs] [96049.833909] btrfs_dedupe_file_range+0x270/0x280 [btrfs] [96049.833916] vfs_dedupe_file_range_one+0xd9/0xe0 [96049.833919] vfs_dedupe_file_range+0x131/0x1b0 [96049.833924] do_vfs_ioctl+0x272/0x6e0 [96049.833927] ? __fget+0x113/0x200 [96049.833931] ksys_ioctl+0x70/0x80 [96049.833933] __x64_sys_ioctl+0x16/0x20 [96049.833937] do_syscall_64+0x60/0x1b0 [96049.833939] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.833941] RIP: 0033:0x7f5c1478ddd7 [96049.833943] RSP: 002b:00007ffe15b196a8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [96049.833945] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1478ddd7 [96049.833946] RDX: 00005625ece322d0 RSI: 00000000c0189436 RDI: 0000000000000004 [96049.833947] RBP: 0000000000000000 R08: 00007f5c14a46f48 R09: 0000000000000040 [96049.833948] R10: 0000000000000541 R11: 0000000000000202 R12: 0000000000000000 [96049.833949] R13: 0000000000000000 R14: 0000000000000004 R15: 00005625ece322d0 [96049.833954] irq event stamp: 6196 [96049.833956] hardirqs last enabled at (6195): [] console_unlock+0x503/0x640 [96049.833958] hardirqs last disabled at (6196): [] trace_hardirqs_off_thunk+0x1a/0x1c [96049.833959] softirqs last enabled at (6114): [] __do_softirq+0x370/0x421 [96049.833964] softirqs last disabled at (6095): [] irq_exit+0xcd/0xe0 [96049.833965] ---[ end trace db7b05f01b7fa10c ]--- [96049.935816] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.935822] irq event stamp: 6584 [96049.935823] hardirqs last enabled at (6583): [] console_unlock+0x503/0x640 [96049.935825] hardirqs last disabled at (6584): [] trace_hardirqs_off_thunk+0x1a/0x1c [96049.935827] softirqs last enabled at (6328): [] __do_softirq+0x370/0x421 [96049.935828] softirqs last disabled at (6313): [] irq_exit+0xcd/0xe0 [96049.935829] ---[ end trace db7b05f01b7fa123 ]--- [96049.935840] ------------[ cut here ]------------ [96049.936065] WARNING: CPU: 1 PID: 24463 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs] [96049.936107] CPU: 1 PID: 24463 Comm: umount Tainted: G W 4.19.0-rc7-btrfs-next-39 #1 [96049.936108] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [96049.936117] RIP: 0010:insert_state+0x101/0x120 [btrfs] [96049.936119] RSP: 0018:ffffafd2c3637bc0 EFLAGS: 00010282 [96049.936120] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006 [96049.936121] RDX: 0000000000000007 RSI: ffff990445cf88e0 RDI: ffff99047b2968a0 [96049.936122] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000 [96049.936123] R10: ffffafd2c3637b88 R11: 0000000000000000 R12: ffff9904574301e8 [96049.936124] R13: 000000000004e000 R14: ffffafd2c3637c50 R15: ffffafd2c3637c48 [96049.936125] FS: 00007fe4b87e72c0(0000) GS:ffff99047b280000(0000) knlGS:0000000000000000 [96049.936126] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [96049.936128] CR2: 00005562e52618d8 CR3: 00000001151c8005 CR4: 00000000003606e0 [96049.936129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [96049.936131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [96049.936131] Call Trace: [96049.936141] __set_extent_bit+0x46c/0x6a0 [btrfs] [96049.936154] lock_extent_bits+0x6b/0x210 [btrfs] [96049.936167] btrfs_evict_inode+0x1e1/0x5a0 [btrfs] [96049.936172] evict+0xbf/0x1c0 [96049.936174] dispose_list+0x51/0x80 [96049.936176] evict_inodes+0x193/0x1c0 [96049.936180] generic_shutdown_super+0x3f/0x110 [96049.936182] kill_anon_super+0xe/0x30 [96049.936189] btrfs_kill_super+0x13/0x100 [btrfs] [96049.936191] deactivate_locked_super+0x3a/0x70 [96049.936193] cleanup_mnt+0x3b/0x80 [96049.936195] task_work_run+0x93/0xc0 [96049.936198] exit_to_usermode_loop+0xfa/0x100 [96049.936201] do_syscall_64+0x17f/0x1b0 [96049.936202] entry_SYSCALL_64_after_hwframe+0x49/0xbe [96049.936204] RIP: 0033:0x7fe4b80cfb37 [96049.936206] RSP: 002b:00007ffff092b688 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [96049.936207] RAX: 0000000000000000 RBX: 00005562e5259060 RCX: 00007fe4b80cfb37 [96049.936208] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00005562e525faa0 [96049.936209] RBP: 00005562e525faa0 R08: 00005562e525f770 R09: 0000000000000015 [96049.936210] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fe4b85d1e64 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910 [96049.936216] irq event stamp: 6616 [96049.936219] hardirqs last enabled at (6615): [] console_unlock+0x503/0x640 [96049.936219] hardirqs last disabled at (6616): [] trace_hardirqs_off_thunk+0x1a/0x1c [96049.936222] softirqs last enabled at (6328): [] __do_softirq+0x370/0x421 [96049.936222] softirqs last disabled at (6313): [] irq_exit+0xcd/0xe0 [96049.936223] ---[ end trace db7b05f01b7fa124 ]--- The second stack trace, from inode eviction, is repeated forever due to the infinite loop during eviction. This is the same type of problem fixed way back in 2015 by commit 113e8283869b ("Btrfs: fix inode eviction infinite loop after extent_same ioctl") and commit ccccf3d67294 ("Btrfs: fix inode eviction infinite loop after cloning into it"). So fix this by returning immediately if the deduplication range length gets rounded down to 0 bytes, as there is nothing that needs to be done in such case. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xe6 0 100" /mnt/foo $ xfs_io -f -c "pwrite -S 0xe6 0 1M" /mnt/bar # Unmount the filesystem and mount it again so that we start without any # extent state records when we ask for the deduplication. $ umount /mnt $ mount /dev/sdb /mnt $ xfs_io -c "dedupe /mnt/foo 0 500K 100" /mnt/bar # This unmount triggers the infinite loop. $ umount /mnt A test case for fstests will follow soon. Fixes: de02b9f6bb65 ("Btrfs: fix data corruption when deduplicating between different files") CC: # 4.19+ Reviewed-by: Nikolay Borisov Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a990a9045139..ed3ba55f65ac 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3488,6 +3488,8 @@ static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 olen, const u64 sz = BTRFS_I(src)->root->fs_info->sectorsize; len = round_down(i_size_read(src), sz) - loff; + if (len == 0) + return 0; olen = len; } } From ac765f83f1397646c11092a032d4f62c3d478b81 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 5 Nov 2018 11:14:17 +0000 Subject: [PATCH 208/726] Btrfs: fix data corruption due to cloning of eof block We currently allow cloning a range from a file which includes the last block of the file even if the file's size is not aligned to the block size. This is fine and useful when the destination file has the same size, but when it does not and the range ends somewhere in the middle of the destination file, it leads to corruption because the bytes between the EOF and the end of the block have undefined data (when there is support for discard/trimming they have a value of 0x00). Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ export foo_size=$((256 * 1024 + 100)) $ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo $ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar $ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar $ od -A d -t x1 /mnt/bar 0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c * 0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00 0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 * 1048576 The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527 (512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead of 0xb5. This is similar to the problem we had for deduplication that got recently fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when deduplicating between different files"). Fix this by not allowing such operations to be performed and return the errno -EINVAL to user space. This is what XFS is doing as well at the VFS level. This change however now makes us return -EINVAL instead of -EOPNOTSUPP for cases where the source range maps to an inline extent and the destination range's end is smaller then the destination file's size, since the detection of inline extents is done during the actual process of dropping file extent items (at __btrfs_drop_extents()). Returning the -EINVAL error is done early on and solely based on the input parameters (offsets and length) and destination file's size. This makes us consistent with XFS and anyone else supporting cloning since this case is now checked at a higher level in the VFS and is where the -EINVAL will be returned from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1 by commit 07d19dc9fbe9 ("vfs: avoid problematic remapping requests into partial EOF block"). So this change is more geared towards stable kernels, as it's unlikely the new VFS checks get removed intentionally. A test case for fstests follows soon, as well as an update to filter existing tests that expect -EOPNOTSUPP to accept -EINVAL as well. CC: # 4.4+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index ed3ba55f65ac..95f9625dccc4 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -4279,9 +4279,17 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, goto out_unlock; if (len == 0) olen = len = src->i_size - off; - /* if we extend to eof, continue to block boundary */ - if (off + len == src->i_size) + /* + * If we extend to eof, continue to block boundary if and only if the + * destination end offset matches the destination file's size, otherwise + * we would be corrupting data by placing the eof block into the middle + * of a file. + */ + if (off + len == src->i_size) { + if (!IS_ALIGNED(len, bs) && destoff + len < inode->i_size) + goto out_unlock; len = ALIGN(src->i_size, bs) - off; + } if (len == 0) { ret = 0; From 19ed3e2dd8549c1a34914e8dad01b64e7837645a Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Mon, 5 Nov 2018 10:18:58 +0800 Subject: [PATCH 209/726] iommu/vt-d: Fix NULL pointer dereference in prq_event_thread() When handling page request without pasid event, go to "no_pasid" branch instead of "bad_req". Otherwise, a NULL pointer deference will happen there. Cc: Ashok Raj Cc: Jacob Pan Cc: Sohil Mehta Signed-off-by: Lu Baolu Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling' Signed-off-by: Joerg Roedel --- drivers/iommu/intel-svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c index db301efe126d..887150907526 100644 --- a/drivers/iommu/intel-svm.c +++ b/drivers/iommu/intel-svm.c @@ -595,7 +595,7 @@ static irqreturn_t prq_event_thread(int irq, void *d) pr_err("%s: Page request without PASID: %08llx %08llx\n", iommu->name, ((unsigned long long *)req)[0], ((unsigned long long *)req)[1]); - goto bad_req; + goto no_pasid; } if (!svm || svm->pasid != req->pasid) { From 132bf6723749f7219c399831eeb286dbbb985429 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 6 Nov 2018 07:50:50 -0800 Subject: [PATCH 210/726] xfs: Fix error code in 'xfs_ioc_getbmap()' In this function, once 'buf' has been allocated, we unconditionally return 0. However, 'error' is set to some error codes in several error handling paths. Before commit 232b51948b99 ("xfs: simplify the xfs_getbmap interface") this was not an issue because all error paths were returning directly, but now that some cleanup at the end may be needed, we must propagate the error code. Fixes: 232b51948b99 ("xfs: simplify the xfs_getbmap interface") Signed-off-by: Christophe JAILLET Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index 6e2c08f30f60..6ecdbb3af7de 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1608,7 +1608,7 @@ xfs_ioc_getbmap( error = 0; out_free_buf: kmem_free(buf); - return 0; + return error; } struct getfsmap_info { From bdec055bb9f262964c4f5cb330dab26646c345c6 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Tue, 6 Nov 2018 07:50:50 -0800 Subject: [PATCH 211/726] xfs: print buffer offsets when dumping corrupt buffers Use DUMP_PREFIX_OFFSET when printing hex dumps of corrupt buffers because modern Linux now prints a 32-bit hash of our 64-bit pointer when using DUMP_PREFIX_ADDRESS: 00000000b4bb4297: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... 00000005ec77e26: 00 00 00 00 02 d0 5a 00 00 00 00 00 00 00 00 00 ......Z......... 000000015938018: 21 98 e8 b4 fd de 4c 07 bc ea 3c e5 ae b4 7c 48 !.....L...<...|H This is totally worthless for a sequential dump since we probably only care about tracking the buffer offsets and afaik there's no way to recover the actual pointer from the hashed value. Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner --- fs/xfs/xfs_message.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_message.c b/fs/xfs/xfs_message.c index 576c375ce12a..6b736ea58d35 100644 --- a/fs/xfs/xfs_message.c +++ b/fs/xfs/xfs_message.c @@ -107,5 +107,5 @@ assfail(char *expr, char *file, int line) void xfs_hex_dump(void *p, int length) { - print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_ADDRESS, 16, 1, p, length, 1); + print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_OFFSET, 16, 1, p, length, 1); } From 837514f7a4ca4aca06aec5caa5ff56d33ef06976 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 6 Nov 2018 07:50:50 -0800 Subject: [PATCH 212/726] xfs: fix overflow in xfs_attr3_leaf_verify generic/070 on 64k block size filesystems is failing with a verifier corruption on writeback or an attribute leaf block: [ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480 [ 94.975623] XFS (pmem0): Unmount and run xfs_repair [ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer: [ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... [ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................ [ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7.... [ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................ [ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........ [ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe.... [ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|.. [ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-...... [ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3 This is failing this check: end = ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) >>>>> return __this_address; if (end > mp->m_attr_geo->blksize) return __this_address; And from the buffer output above, the freemap array is: freemap[0].base = 0x00a0 freemap[0].size = 0xdcf4 end = 0xdd94 freemap[1].base = 0xfe98 freemap[1].size = 0x0168 end = 0x10000 freemap[2].base = 0xf0d8 freemap[2].size = 0x07e0 end = 0xf8b8 These all look valid - the block size is 0x10000 and so from the last check in the above verifier fragment we know that the end of freemap[1] is valid. The problem is that end is declared as: uint16_t end; And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a corruption. Fix the verifier to use uint32_t types for the check and hence avoid the overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577 Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_attr_leaf.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index 6fc5425b1474..2652d00842d6 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -243,7 +243,7 @@ xfs_attr3_leaf_verify( struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_attr_leafblock *leaf = bp->b_addr; struct xfs_attr_leaf_entry *entries; - uint16_t end; + uint32_t end; /* must be 32bit - see below */ int i; xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr, leaf); @@ -293,6 +293,11 @@ xfs_attr3_leaf_verify( /* * Quickly check the freemap information. Attribute data has to be * aligned to 4-byte boundaries, and likewise for the free space. + * + * Note that for 64k block size filesystems, the freemap entries cannot + * overflow as they are only be16 fields. However, when checking end + * pointer of the freemap, we have to be careful to detect overflows and + * so use uint32_t for those checks. */ for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) { if (ichdr.freemap[i].base > mp->m_attr_geo->blksize) @@ -303,7 +308,9 @@ xfs_attr3_leaf_verify( return __this_address; if (ichdr.freemap[i].size & 0x3) return __this_address; - end = ichdr.freemap[i].base + ichdr.freemap[i].size; + + /* be care of 16 bit overflows here */ + end = (uint32_t)ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) return __this_address; if (end > mp->m_attr_geo->blksize) From 9de9aa45e9bd67232e000cca42ceb134b8ae51b6 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Tue, 16 Oct 2018 11:56:26 +0300 Subject: [PATCH 213/726] tools/power/cpupower: fix compilation with STATIC=true Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking. Signed-off-by: Konstantin Khlebnikov Acked-by: Thomas Renninger Cc: Signed-off-by: Shuah Khan (Samsung OSG) --- tools/power/cpupower/bench/Makefile | 2 +- tools/power/cpupower/lib/cpufreq.c | 2 +- tools/power/cpupower/lib/cpuidle.c | 2 +- tools/power/cpupower/lib/cpupower.c | 4 ++-- tools/power/cpupower/lib/cpupower_intern.h | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile index d79ab161cc75..f68b4bc55273 100644 --- a/tools/power/cpupower/bench/Makefile +++ b/tools/power/cpupower/bench/Makefile @@ -9,7 +9,7 @@ endif ifeq ($(strip $(STATIC)),true) LIBS = -L../ -L$(OUTPUT) -lm OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o \ - $(OUTPUT)../lib/cpufreq.o $(OUTPUT)../lib/sysfs.o + $(OUTPUT)../lib/cpufreq.o $(OUTPUT)../lib/cpupower.o else LIBS = -L../ -L$(OUTPUT) -lm -lcpupower OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c index 1b993fe1ce23..0c0f3e3f0d80 100644 --- a/tools/power/cpupower/lib/cpufreq.c +++ b/tools/power/cpupower/lib/cpufreq.c @@ -28,7 +28,7 @@ static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname, snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", cpu, fname); - return sysfs_read_file(path, buf, buflen); + return cpupower_read_sysfs(path, buf, buflen); } /* helper function to write a new value to a /sys file */ diff --git a/tools/power/cpupower/lib/cpuidle.c b/tools/power/cpupower/lib/cpuidle.c index 9bd4c7655fdb..852d25462388 100644 --- a/tools/power/cpupower/lib/cpuidle.c +++ b/tools/power/cpupower/lib/cpuidle.c @@ -319,7 +319,7 @@ static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf, snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname); - return sysfs_read_file(path, buf, buflen); + return cpupower_read_sysfs(path, buf, buflen); } diff --git a/tools/power/cpupower/lib/cpupower.c b/tools/power/cpupower/lib/cpupower.c index 9c395ec924de..9711d628b0f4 100644 --- a/tools/power/cpupower/lib/cpupower.c +++ b/tools/power/cpupower/lib/cpupower.c @@ -15,7 +15,7 @@ #include "cpupower.h" #include "cpupower_intern.h" -unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) +unsigned int cpupower_read_sysfs(const char *path, char *buf, size_t buflen) { int fd; ssize_t numread; @@ -95,7 +95,7 @@ static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *re snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s", cpu, fname); - if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0) + if (cpupower_read_sysfs(path, linebuf, MAX_LINE_LEN) == 0) return -1; *result = strtol(linebuf, &endp, 0); if (endp == linebuf || errno == ERANGE) diff --git a/tools/power/cpupower/lib/cpupower_intern.h b/tools/power/cpupower/lib/cpupower_intern.h index 92affdfbe417..4887c76d23f8 100644 --- a/tools/power/cpupower/lib/cpupower_intern.h +++ b/tools/power/cpupower/lib/cpupower_intern.h @@ -3,4 +3,4 @@ #define MAX_LINE_LEN 4096 #define SYSFS_PATH_MAX 255 -unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen); +unsigned int cpupower_read_sysfs(const char *path, char *buf, size_t buflen); From 4bf3bd0f15a9c81064c0b430d04d221ffcc503cc Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 16 Oct 2018 17:06:08 +0200 Subject: [PATCH 214/726] tools cpupower debug: Allow to use outside build flags Adding CFLAGS and LDFLAGS to be used during the build. Cc: Thomas Renninger Cc: Shuah Khan Signed-off-by: Jiri Olsa Acked-by: Thomas Renninger Signed-off-by: Shuah Khan (Samsung OSG) --- tools/power/cpupower/debug/x86_64/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile index 59af84b8ef45..b1b6c43644e7 100644 --- a/tools/power/cpupower/debug/x86_64/Makefile +++ b/tools/power/cpupower/debug/x86_64/Makefile @@ -13,10 +13,10 @@ INSTALL = /usr/bin/install default: all $(OUTPUT)centrino-decode: ../i386/centrino-decode.c - $(CC) $(CFLAGS) -o $@ $< + $(CC) $(CFLAGS) -o $@ $(LDFLAGS) $< $(OUTPUT)powernow-k8-decode: ../i386/powernow-k8-decode.c - $(CC) $(CFLAGS) -o $@ $< + $(CC) $(CFLAGS) -o $@ $(LDFLAGS) $< all: $(OUTPUT)centrino-decode $(OUTPUT)powernow-k8-decode From dbc4ca339c8dbdd8652ce57c16bf5ef45ee4307e Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 16 Oct 2018 17:06:09 +0200 Subject: [PATCH 215/726] tools cpupower: Override CFLAGS assignments So user could specify outside CFLAGS values. Cc: Thomas Renninger Cc: Shuah Khan Signed-off-by: Jiri Olsa Acked-by: Thomas Renninger Signed-off-by: Shuah Khan (Samsung OSG) --- tools/power/cpupower/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index 1dd5f4fcffd5..db66a952c173 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -129,7 +129,7 @@ WARNINGS += $(call cc-supports,-Wno-pointer-sign) WARNINGS += $(call cc-supports,-Wdeclaration-after-statement) WARNINGS += -Wshadow -CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \ +override CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \ -DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE UTIL_OBJS = utils/helpers/amd.o utils/helpers/msr.o \ @@ -156,12 +156,12 @@ LIB_SRC = lib/cpufreq.c lib/cpupower.c lib/cpuidle.c LIB_OBJS = lib/cpufreq.o lib/cpupower.o lib/cpuidle.o LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS)) -CFLAGS += -pipe +override CFLAGS += -pipe ifeq ($(strip $(NLS)),true) INSTALL_NLS += install-gmo COMPILE_NLS += create-gmo - CFLAGS += -DNLS + override CFLAGS += -DNLS endif ifeq ($(strip $(CPUFREQ_BENCH)),true) @@ -175,7 +175,7 @@ ifeq ($(strip $(STATIC)),true) UTIL_SRC += $(LIB_SRC) endif -CFLAGS += $(WARNINGS) +override CFLAGS += $(WARNINGS) ifeq ($(strip $(V)),false) QUIET=@ @@ -188,10 +188,10 @@ export QUIET ECHO # if DEBUG is enabled, then we do not strip or optimize ifeq ($(strip $(DEBUG)),true) - CFLAGS += -O1 -g -DDEBUG + override CFLAGS += -O1 -g -DDEBUG STRIPCMD = /bin/true -Since_we_are_debugging else - CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer + override CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment endif From 7f4cedd882f7cae83177066c2b239ef457ce4a42 Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Fri, 5 Oct 2018 23:59:50 +0200 Subject: [PATCH 216/726] drm/sun4i: tcon: fix check of tcon->panel null pointer Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by: Giulio Benetti Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com --- drivers/gpu/drm/sun4i/sun4i_lvds.c | 4 ++-- drivers/gpu/drm/sun4i/sun4i_rgb.c | 4 ++-- drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c index af7dcb6da351..e7eb0d1e17be 100644 --- a/drivers/gpu/drm/sun4i/sun4i_lvds.c +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c @@ -75,7 +75,7 @@ static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling LVDS output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_prepare(tcon->panel); drm_panel_enable(tcon->panel); } @@ -88,7 +88,7 @@ static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling LVDS output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_disable(tcon->panel); drm_panel_unprepare(tcon->panel); } diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index bf068da6b12e..f4a22689eb54 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -135,7 +135,7 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_prepare(tcon->panel); drm_panel_enable(tcon->panel); } @@ -148,7 +148,7 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { drm_panel_disable(tcon->panel); drm_panel_unprepare(tcon->panel); } diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index c78cd35a1294..e4b3bd0307ef 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -555,7 +555,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, * Following code is a way to avoid quirks all around TCON * and DOTCLOCK drivers. */ - if (!IS_ERR(tcon->panel)) { + if (tcon->panel) { struct drm_panel *panel = tcon->panel; struct drm_connector *connector = panel->connector; struct drm_display_info display_info = connector->display_info; From a8939766c75c06b5a0ab691ecbba9347e4e520cf Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Fri, 5 Oct 2018 23:59:51 +0200 Subject: [PATCH 217/726] drm/sun4i: tcon: prevent tcon->panel dereference if NULL If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by: Giulio Benetti Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index e4b3bd0307ef..f949287d926c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -491,7 +491,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, sun4i_tcon0_mode_set_common(tcon, mode); /* Set dithering if needed */ - sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector); + if (tcon->panel) + sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 0); From df5e31c204b34e8d9e5ec33f5b28e960c4f25e14 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Thu, 25 Oct 2018 16:05:36 +0300 Subject: [PATCH 218/726] drm/i915: Fix ilk+ watermarks when disabling pipes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper Cc: Maarten Lankhorst Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst #irc (cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b8dfdbc9ca1f..23d8008a93bb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12768,17 +12768,12 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_check_cpu_fifo_underruns(dev_priv); intel_check_pch_fifo_underruns(dev_priv); - if (!new_crtc_state->active) { - /* - * Make sure we don't call initial_watermarks - * for ILK-style watermark updates. - * - * No clue what this is supposed to achieve. - */ - if (INTEL_GEN(dev_priv) >= 9) - dev_priv->display.initial_watermarks(intel_state, - to_intel_crtc_state(new_crtc_state)); - } + /* FIXME unify this for all platforms */ + if (!new_crtc_state->active && + !HAS_GMCH_DISPLAY(dev_priv) && + dev_priv->display.initial_watermarks) + dev_priv->display.initial_watermarks(intel_state, + to_intel_crtc_state(new_crtc_state)); } } From f98e8a572bddbf27032114127d2fcc78fa5e6a9d Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Thu, 1 Nov 2018 14:15:49 +0100 Subject: [PATCH 219/726] clk: fixed-factor: fix of_node_get-put imbalance When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by: Alan Tull Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stephen Boyd --- drivers/clk/clk-fixed-factor.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c index ef0ca9414f37..ff83e899df71 100644 --- a/drivers/clk/clk-fixed-factor.c +++ b/drivers/clk/clk-fixed-factor.c @@ -210,6 +210,7 @@ static int of_fixed_factor_clk_remove(struct platform_device *pdev) { struct clk *clk = platform_get_drvdata(pdev); + of_clk_del_provider(pdev->dev.of_node); clk_unregister_fixed_factor(clk); return 0; From 98ee3fc7ef8395f8b7a379e6608aee91efc66d48 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 6 Nov 2018 17:25:37 +0100 Subject: [PATCH 220/726] mtd: nand: Fix nanddev_pos_next_page() kernel-doc header Function name is wrong in the kernel-doc header. Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Signed-off-by: Boris Brezillon Reviewed-by: Miquel Raynal --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 78b86dea2f29..7f53ece2c039 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -568,7 +568,7 @@ static inline void nanddev_pos_next_eraseblock(struct nand_device *nand, } /** - * nanddev_pos_next_eraseblock() - Move a position to the next page + * nanddev_pos_next_page() - Move a position to the next page * @nand: NAND device * @pos: the position to update * From 461cf036057477805a8a391e5fd0f5264a5e56a8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 19 Oct 2018 23:08:43 +0300 Subject: [PATCH 221/726] ath9k: Fix a locking bug in ath9k_add_interface() We tried to revert commit d9c52fd17cb4 ("ath9k: fix tx99 with monitor mode interface") but accidentally missed part of the locking change. The lock has to be held earlier so that we're holding it when we do "sc->tx99_vif = vif;" and also there in the current code there is a stray unlock before we have taken the lock. Fixes: 6df0580be8bc ("ath9k: add back support for using active monitor interfaces for tx99") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1e3b5f4a4cf9..f23cb2f3d296 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1251,6 +1251,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, struct ath_vif *avp = (void *)vif->drv_priv; struct ath_node *an = &avp->mcast_node; + mutex_lock(&sc->mutex); if (IS_ENABLED(CONFIG_ATH9K_TX99)) { if (sc->cur_chan->nvifs >= 1) { mutex_unlock(&sc->mutex); @@ -1259,8 +1260,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, sc->tx99_vif = vif; } - mutex_lock(&sc->mutex); - ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); sc->cur_chan->nvifs++; From b630806d7ce2051a3306fa6f1cfa31bc870d7c4b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 25 Oct 2018 10:57:21 -0700 Subject: [PATCH 222/726] wlcore: Fixup "Add support for optional wakeirq" After commit 3c83dd577c7f ("wlcore: Add support for optional wakeirq") landed upstream, I started seeing the following oops on my HiKey board: [ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.870283] Mem abort info: [ 1.870287] ESR = 0x96000005 [ 1.870292] Exception class = DABT (current EL), IL = 32 bits [ 1.870296] SET = 0, FnV = 0 [ 1.870299] EA = 0, S1PTW = 0 [ 1.870302] Data abort info: [ 1.870306] ISV = 0, ISS = 0x00000005 [ 1.870309] CM = 0, WnR = 0 [ 1.870312] [0000000000000010] user address but active_mm is swapper [ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48 [ 1.870331] Hardware name: HiKey Development Board (DT) [ 1.870350] Workqueue: events_freezable mmc_rescan [ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO) [ 1.870366] pc : wl1271_probe+0x210/0x350 [ 1.870371] lr : wl1271_probe+0x210/0x350 [ 1.870374] sp : ffffff80080739b0 [ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000 [ 1.870384] x27: 0000000000000000 x26: 0000000000000000 [ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598 [ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808 [ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000 [ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48 [ 1.870418] x17: 0000000000000000 x16: 0000000000000000 [ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff [ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030 [ 1.870438] x11: 0101010101010101 x10: 0000000000000040 [ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270 [ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000 [ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____)) [ 1.870480] Call trace: [ 1.870485] wl1271_probe+0x210/0x350 [ 1.870491] sdio_bus_probe+0x100/0x128 [ 1.870500] really_probe+0x1a8/0x2b8 [ 1.870506] driver_probe_device+0x58/0x100 [ 1.870511] __device_attach_driver+0x94/0xd8 [ 1.870517] bus_for_each_drv+0x70/0xc8 [ 1.870522] __device_attach+0xe0/0x140 [ 1.870527] device_initial_probe+0x10/0x18 [ 1.870532] bus_probe_device+0x94/0xa0 [ 1.870537] device_add+0x374/0x5b8 [ 1.870542] sdio_add_func+0x60/0x88 [ 1.870546] mmc_attach_sdio+0x1b0/0x358 [ 1.870551] mmc_rescan+0x2cc/0x390 [ 1.870558] process_one_work+0x12c/0x320 [ 1.870563] worker_thread+0x48/0x458 [ 1.870569] kthread+0xf8/0x128 [ 1.870575] ret_from_fork+0x10/0x18 [ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803) [ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]--- It seems since we don't have a wakeirq value in the dts, the wakeirq value in wl1271_probe() is zero, which then causes trouble in irqd_get_trigger_type(irq_get_irq_data(wakeirq)). This patch tries to address this by checking if wakeirq is zero, and not trying to add it to the resources if that is the case. Fixes: 3c83dd577c7f ("wlcore: Add support for optional wakeirq") Cc: Tony Lindgren Cc: Kalle Valo Cc: Eyal Reizer Cc: Anders Roxell Cc: linux-wireless@vger.kernel.org Acked-by: Tony Lindgren Signed-off-by: John Stultz Tested-by: Anders Roxell Signed-off-by: Kalle Valo --- drivers/net/wireless/ti/wlcore/sdio.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 4c2154b9e6a3..bd10165d7eec 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -285,7 +285,7 @@ static int wl1271_probe(struct sdio_func *func, struct resource res[2]; mmc_pm_flag_t mmcflags; int ret = -ENOMEM; - int irq, wakeirq; + int irq, wakeirq, num_irqs; const char *chip_family; /* We are only able to handle the wlan function */ @@ -353,12 +353,17 @@ static int wl1271_probe(struct sdio_func *func, irqd_get_trigger_type(irq_get_irq_data(irq)); res[0].name = "irq"; - res[1].start = wakeirq; - res[1].flags = IORESOURCE_IRQ | - irqd_get_trigger_type(irq_get_irq_data(wakeirq)); - res[1].name = "wakeirq"; - ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); + if (wakeirq > 0) { + res[1].start = wakeirq; + res[1].flags = IORESOURCE_IRQ | + irqd_get_trigger_type(irq_get_irq_data(wakeirq)); + res[1].name = "wakeirq"; + num_irqs = 2; + } else { + num_irqs = 1; + } + ret = platform_device_add_resources(glue->core, res, num_irqs); if (ret) { dev_err(glue->dev, "can't add resources\n"); goto out_dev_put; From 3401d42c7ea2d064d15c66698ff8eb96553179ce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 26 Oct 2018 12:50:39 +0200 Subject: [PATCH 223/726] brcmutil: really fix decoding channel info for 160 MHz bandwidth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previous commit /adding/ support for 160 MHz chanspecs was incomplete. It didn't set bandwidth info and didn't extract control channel info. As the result it was also using uninitialized "sb" var. This change has been tested for two chanspecs found to be reported by some devices/firmwares: 1) 60/160 (0xee32) Before: chnum:50 control_ch_num:36 After: chnum:50 control_ch_num:60 2) 120/160 (0xed72) Before: chnum:114 control_ch_num:100 After: chnum:114 control_ch_num:120 Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth") Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c index e7584b842dce..eb5db94f5745 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c @@ -193,6 +193,9 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch) } break; case BRCMU_CHSPEC_D11AC_BW_160: + ch->bw = BRCMU_CHAN_BW_160; + ch->sb = brcmu_maskget16(ch->chspec, BRCMU_CHSPEC_D11AC_SB_MASK, + BRCMU_CHSPEC_D11AC_SB_SHIFT); switch (ch->sb) { case BRCMU_CHAN_SB_LLL: ch->control_ch_num -= CH_70MHZ_APART; From b374e8686fc35ae124e62dc78725ea656ba1ef8a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 5 Nov 2018 16:51:47 +0100 Subject: [PATCH 224/726] mt76: fix building without CONFIG_LEDS_CLASS When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while mt76 is built-in, we run into a link error: drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device': mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register' We don't really need a hard dependency here as the driver can presumably work just fine without LEDs, so this follows the iwlwifi example and adds a separate Kconfig option for the LED support, this will be available whenever it will link, and otherwise the respective code gets left out from the driver object. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Arnd Bergmann Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt76/Kconfig | 6 ++++++ drivers/net/wireless/mediatek/mt76/mac80211.c | 8 +++++--- drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c | 6 ++++-- 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/Kconfig b/drivers/net/wireless/mediatek/mt76/Kconfig index 0ccbcd7e887d..c30d8f5bbf2a 100644 --- a/drivers/net/wireless/mediatek/mt76/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/Kconfig @@ -1,6 +1,12 @@ config MT76_CORE tristate +config MT76_LEDS + bool + depends on MT76_CORE + depends on LEDS_CLASS=y || MT76_CORE=LEDS_CLASS + default y + config MT76_USB tristate depends on MT76_CORE diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c index 2a699e8b79bf..7d219ff2d480 100644 --- a/drivers/net/wireless/mediatek/mt76/mac80211.c +++ b/drivers/net/wireless/mediatek/mt76/mac80211.c @@ -345,9 +345,11 @@ int mt76_register_device(struct mt76_dev *dev, bool vht, mt76_check_sband(dev, NL80211_BAND_2GHZ); mt76_check_sband(dev, NL80211_BAND_5GHZ); - ret = mt76_led_init(dev); - if (ret) - return ret; + if (IS_ENABLED(CONFIG_MT76_LEDS)) { + ret = mt76_led_init(dev); + if (ret) + return ret; + } return ieee80211_register_hw(hw); } diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c index 3824290b219d..fd125722d1fb 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c @@ -507,8 +507,10 @@ int mt76x2_register_device(struct mt76x02_dev *dev) mt76x2_dfs_init_detector(dev); /* init led callbacks */ - dev->mt76.led_cdev.brightness_set = mt76x2_led_set_brightness; - dev->mt76.led_cdev.blink_set = mt76x2_led_set_blink; + if (IS_ENABLED(CONFIG_MT76_LEDS)) { + dev->mt76.led_cdev.brightness_set = mt76x2_led_set_brightness; + dev->mt76.led_cdev.blink_set = mt76x2_led_set_blink; + } ret = mt76_register_device(&dev->mt76, true, mt76x02_rates, ARRAY_SIZE(mt76x02_rates)); From 313a06e636808387822af24c507cba92703568b1 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Mon, 5 Nov 2018 18:14:41 -0600 Subject: [PATCH 225/726] lib/raid6: Fix arm64 test build The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by: Ard Biesheuvel Signed-off-by: Jeremy Linton Signed-off-by: Catalin Marinas --- lib/raid6/test/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile index 5d73f5cb4d8a..79777645cac9 100644 --- a/lib/raid6/test/Makefile +++ b/lib/raid6/test/Makefile @@ -27,7 +27,7 @@ ifeq ($(ARCH),arm) CFLAGS += -I../../../arch/arm/include -mfpu=neon HAS_NEON = yes endif -ifeq ($(ARCH),arm64) +ifeq ($(ARCH),aarch64) CFLAGS += -I../../../arch/arm64/include HAS_NEON = yes endif @@ -41,7 +41,7 @@ ifeq ($(IS_X86),yes) gcc -c -x assembler - >&/dev/null && \ rm ./-.o && echo -DCONFIG_AS_AVX512=1) else ifeq ($(HAS_NEON),yes) - OBJS += neon.o neon1.o neon2.o neon4.o neon8.o + OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1 else HAS_ALTIVEC := $(shell printf '\#include \nvector int a;\n' |\ From 5d96c9342c23ee1d084802dcf064caa67ecaa45b Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 25 Oct 2018 18:37:28 -0600 Subject: [PATCH 226/726] acpi/nfit, x86/mce: Handle only uncorrectable machine checks The MCE handler for nfit devices is called for memory errors on a Non-Volatile DIMM and adds the error location to a 'badblocks' list. This list is used by the various NVDIMM drivers to avoid consuming known poison locations during IO. The MCE handler gets called for both corrected and uncorrectable errors. Until now, both kinds of errors have been added to the badblocks list. However, corrected memory errors indicate that the problem has already been fixed by hardware, and the resulting interrupt is merely a notification to Linux. As far as future accesses to that location are concerned, it is perfectly fine to use, and thus doesn't need to be included in the above badblocks list. Add a check in the nfit MCE handler to filter out corrected mce events, and only process uncorrectable errors. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Omar Avelar Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov CC: Arnd Bergmann CC: Dan Williams CC: Dave Jiang CC: elliott@hpe.com CC: "H. Peter Anvin" CC: Ingo Molnar CC: Len Brown CC: linux-acpi@vger.kernel.org CC: linux-edac CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo CC: "Rafael J. Wysocki" CC: Ross Zwisler CC: stable CC: Thomas Gleixner CC: Tony Luck CC: x86-ml CC: Yazen Ghannam Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce.c | 3 ++- drivers/acpi/nfit/mce.c | 4 ++-- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 4da9b1c58d28..dbd9fe2f6163 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -221,6 +221,7 @@ static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_am int mce_available(struct cpuinfo_x86 *c); bool mce_is_memory_error(struct mce *m); +bool mce_is_correctable(struct mce *m); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 8c66d2fc8f81..77527b8ea982 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -534,7 +534,7 @@ bool mce_is_memory_error(struct mce *m) } EXPORT_SYMBOL_GPL(mce_is_memory_error); -static bool mce_is_correctable(struct mce *m) +bool mce_is_correctable(struct mce *m) { if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED) return false; @@ -547,6 +547,7 @@ static bool mce_is_correctable(struct mce *m) return true; } +EXPORT_SYMBOL_GPL(mce_is_correctable); static bool cec_add_mce(struct mce *m) { diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index e9626bf6ca29..7a51707f87e9 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -25,8 +25,8 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, struct acpi_nfit_desc *acpi_desc; struct nfit_spa *nfit_spa; - /* We only care about memory errors */ - if (!mce_is_memory_error(mce)) + /* We only care about uncorrectable memory errors */ + if (!mce_is_memory_error(mce) || mce_is_correctable(mce)) return NOTIFY_DONE; /* From e8a308e5f47e545e0d41d0686c00f5f5217c5f61 Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Thu, 25 Oct 2018 18:37:29 -0600 Subject: [PATCH 227/726] acpi/nfit, x86/mce: Validate a MCE's address before using it The NFIT machine check handler uses the physical address from the mce structure, and compares it against information in the ACPI NFIT table to determine whether that location lies on an NVDIMM. The mce->addr field however may not always be valid, and this is indicated by the MCI_STATUS_ADDRV bit in the status field. Export mce_usable_address() which already performs validation for the address, and use it in the NFIT handler. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Robert Elliott Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov CC: Arnd Bergmann Cc: Dan Williams CC: Dave Jiang CC: elliott@hpe.com CC: "H. Peter Anvin" CC: Ingo Molnar CC: Len Brown CC: linux-acpi@vger.kernel.org CC: linux-edac CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo CC: "Rafael J. Wysocki" CC: Ross Zwisler CC: stable CC: Thomas Gleixner CC: Tony Luck CC: x86-ml CC: Yazen Ghannam Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce.c | 3 ++- drivers/acpi/nfit/mce.c | 4 ++++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index dbd9fe2f6163..c1a812bd5a27 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -222,6 +222,7 @@ static inline void mce_hygon_feature_init(struct cpuinfo_x86 *c) { return mce_am int mce_available(struct cpuinfo_x86 *c); bool mce_is_memory_error(struct mce *m); bool mce_is_correctable(struct mce *m); +int mce_usable_address(struct mce *m); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 77527b8ea982..36d2696c9563 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -485,7 +485,7 @@ static void mce_report_event(struct pt_regs *regs) * be somewhat complicated (e.g. segment offset would require an instruction * parser). So only support physical addresses up to page granuality for now. */ -static int mce_usable_address(struct mce *m) +int mce_usable_address(struct mce *m) { if (!(m->status & MCI_STATUS_ADDRV)) return 0; @@ -505,6 +505,7 @@ static int mce_usable_address(struct mce *m) return 1; } +EXPORT_SYMBOL_GPL(mce_usable_address); bool mce_is_memory_error(struct mce *m) { diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index 7a51707f87e9..d6c1b10f6c25 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -29,6 +29,10 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, if (!mce_is_memory_error(mce) || mce_is_correctable(mce)) return NOTIFY_DONE; + /* Verify the address reported in the MCE is valid. */ + if (!mce_usable_address(mce)) + return NOTIFY_DONE; + /* * mce->addr contains the physical addr accessed that caused the * machine check. We need to walk through the list of NFITs, and see From 042cb56478152b31c50bea8a784fc826891eb38e Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Mon, 5 Nov 2018 14:35:40 -0800 Subject: [PATCH 228/726] net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delay This patch allows users to enable/disable internal TX and/or RX clock delay for BCM54616S PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay"). Signed-off-by: Tao Ren Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index e86ea105c802..704537010453 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -92,7 +92,7 @@ static int bcm54612e_config_init(struct phy_device *phydev) return 0; } -static int bcm5481x_config(struct phy_device *phydev) +static int bcm54xx_config_clock_delay(struct phy_device *phydev) { int rc, val; @@ -429,7 +429,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev) ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ - bcm5481x_config(phydev); + bcm54xx_config_clock_delay(phydev); if (of_property_read_bool(np, "enet-phy-lane-swap")) { /* Lane Swap - Undocumented register...magic! */ @@ -442,6 +442,19 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_config_aneg(struct phy_device *phydev) +{ + int ret; + + /* Aneg firsly. */ + ret = genphy_config_aneg(phydev); + + /* Then we can set up the delay. */ + bcm54xx_config_clock_delay(phydev); + + return ret; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -636,6 +649,7 @@ static struct phy_driver broadcom_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm54xx_config_init, + .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, }, { From d52888aa2753e3063a9d3a0c9f72f94aa9809c15 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 26 Oct 2018 15:28:54 +0300 Subject: [PATCH 229/726] x86/mm: Move LDT remap out of KASLR region on 5-level paging On 5-level paging the LDT remap area is placed in the middle of the KASLR randomization region and it can overlap with the direct mapping, the vmalloc or the vmap area. The LDT mapping is per mm, so it cannot be moved into the P4D page table next to the CPU_ENTRY_AREA without complicating PGD table allocation for 5-level paging. The 4 PGD slot gap just before the direct mapping is reserved for hypervisors, so it cannot be used. Move the direct mapping one slot deeper and use the resulting gap for the LDT remap area. The resulting layout is the same for 4 and 5 level paging. [ tglx: Massaged changelog ] Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by: Kirill A. Shutemov Signed-off-by: Thomas Gleixner Reviewed-by: Andy Lutomirski Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-2-kirill.shutemov@linux.intel.com --- Documentation/x86/x86_64/mm.txt | 34 +++++++++++++------------ arch/x86/include/asm/page_64_types.h | 12 +++++---- arch/x86/include/asm/pgtable_64_types.h | 4 +-- arch/x86/xen/mmu_pv.c | 6 ++--- 4 files changed, 29 insertions(+), 27 deletions(-) diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index 73aaaa3da436..804f9426ed17 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -34,23 +34,24 @@ __________________|____________|__________________|_________|___________________ ____________________________________________________________|___________________________________________________________ | | | | ffff800000000000 | -128 TB | ffff87ffffffffff | 8 TB | ... guard hole, also reserved for hypervisor - ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base) - ffffc80000000000 | -56 TB | ffffc8ffffffffff | 1 TB | ... unused hole + ffff880000000000 | -120 TB | ffff887fffffffff | 0.5 TB | LDT remap for PTI + ffff888000000000 | -119.5 TB | ffffc87fffffffff | 64 TB | direct mapping of all physical memory (page_offset_base) + ffffc88000000000 | -55.5 TB | ffffc8ffffffffff | 0.5 TB | ... unused hole ffffc90000000000 | -55 TB | ffffe8ffffffffff | 32 TB | vmalloc/ioremap space (vmalloc_base) ffffe90000000000 | -23 TB | ffffe9ffffffffff | 1 TB | ... unused hole ffffea0000000000 | -22 TB | ffffeaffffffffff | 1 TB | virtual memory map (vmemmap_base) ffffeb0000000000 | -21 TB | ffffebffffffffff | 1 TB | ... unused hole ffffec0000000000 | -20 TB | fffffbffffffffff | 16 TB | KASAN shadow memory +__________________|____________|__________________|_________|____________________________________________________________ + | + | Identical layout to the 56-bit one from here on: +____________________________________________________________|____________________________________________________________ + | | | | fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole | | | | vaddr_end for KASLR fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping - fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | LDT remap for PTI + fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks -__________________|____________|__________________|_________|____________________________________________________________ - | - | Identical layout to the 47-bit one from here on: -____________________________________________________________|____________________________________________________________ - | | | | ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole @@ -83,7 +84,7 @@ Notes: __________________|____________|__________________|_________|___________________________________________________________ | | | | 0000800000000000 | +64 PB | ffff7fffffffffff | ~16K PB | ... huge, still almost 64 bits wide hole of non-canonical - | | | | virtual memory addresses up to the -128 TB + | | | | virtual memory addresses up to the -64 PB | | | | starting offset of kernel mappings. __________________|____________|__________________|_________|___________________________________________________________ | @@ -91,23 +92,24 @@ __________________|____________|__________________|_________|___________________ ____________________________________________________________|___________________________________________________________ | | | | ff00000000000000 | -64 PB | ff0fffffffffffff | 4 PB | ... guard hole, also reserved for hypervisor - ff10000000000000 | -60 PB | ff8fffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base) - ff90000000000000 | -28 PB | ff9fffffffffffff | 4 PB | LDT remap for PTI + ff10000000000000 | -60 PB | ff10ffffffffffff | 0.25 PB | LDT remap for PTI + ff11000000000000 | -59.75 PB | ff90ffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base) + ff91000000000000 | -27.75 PB | ff9fffffffffffff | 3.75 PB | ... unused hole ffa0000000000000 | -24 PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base) ffd2000000000000 | -11.5 PB | ffd3ffffffffffff | 0.5 PB | ... unused hole ffd4000000000000 | -11 PB | ffd5ffffffffffff | 0.5 PB | virtual memory map (vmemmap_base) ffd6000000000000 | -10.5 PB | ffdeffffffffffff | 2.25 PB | ... unused hole ffdf000000000000 | -8.25 PB | fffffdffffffffff | ~8 PB | KASAN shadow memory - fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole - | | | | vaddr_end for KASLR - fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping - fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole - ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks __________________|____________|__________________|_________|____________________________________________________________ | | Identical layout to the 47-bit one from here on: ____________________________________________________________|____________________________________________________________ | | | | + fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole + | | | | vaddr_end for KASLR + fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping + fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole + ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks ffffff8000000000 | -512 GB | ffffffeeffffffff | 444 GB | ... unused hole ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index cd0cf1c568b4..8f657286d599 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -33,12 +33,14 @@ /* * Set __PAGE_OFFSET to the most negative possible address + - * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a - * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's - * what Xen requires. + * PGDIR_SIZE*17 (pgd slot 273). + * + * The gap is to allow a space for LDT remap for PTI (1 pgd slot) and space for + * a hypervisor (16 slots). Choosing 16 slots for a hypervisor is arbitrary, + * but it's what Xen requires. */ -#define __PAGE_OFFSET_BASE_L5 _AC(0xff10000000000000, UL) -#define __PAGE_OFFSET_BASE_L4 _AC(0xffff880000000000, UL) +#define __PAGE_OFFSET_BASE_L5 _AC(0xff11000000000000, UL) +#define __PAGE_OFFSET_BASE_L4 _AC(0xffff888000000000, UL) #ifdef CONFIG_DYNAMIC_MEMORY_LAYOUT #define __PAGE_OFFSET page_offset_base diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h index 04edd2d58211..84bd9bdc1987 100644 --- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -111,9 +111,7 @@ extern unsigned int ptrs_per_p4d; */ #define MAXMEM (1UL << MAX_PHYSMEM_BITS) -#define LDT_PGD_ENTRY_L4 -3UL -#define LDT_PGD_ENTRY_L5 -112UL -#define LDT_PGD_ENTRY (pgtable_l5_enabled() ? LDT_PGD_ENTRY_L5 : LDT_PGD_ENTRY_L4) +#define LDT_PGD_ENTRY -240UL #define LDT_BASE_ADDR (LDT_PGD_ENTRY << PGDIR_SHIFT) #define LDT_END_ADDR (LDT_BASE_ADDR + PGDIR_SIZE) diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 0d7b3ae4960b..a5d7ed125337 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -1905,7 +1905,7 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) init_top_pgt[0] = __pgd(0); /* Pre-constructed entries are in pfn, so convert to mfn */ - /* L4[272] -> level3_ident_pgt */ + /* L4[273] -> level3_ident_pgt */ /* L4[511] -> level3_kernel_pgt */ convert_pfn_mfn(init_top_pgt); @@ -1925,8 +1925,8 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) addr[0] = (unsigned long)pgd; addr[1] = (unsigned long)l3; addr[2] = (unsigned long)l2; - /* Graft it onto L4[272][0]. Note that we creating an aliasing problem: - * Both L4[272][0] and L4[511][510] have entries that point to the same + /* Graft it onto L4[273][0]. Note that we creating an aliasing problem: + * Both L4[273][0] and L4[511][510] have entries that point to the same * L2 (PMD) tables. Meaning that if you modify it in __va space * it will be also modified in the __ka space! (But if you just * modify the PMD table to point to other PTE's or none, then you From a0e6e0831c516860fc7f9be1db6c081fe902ebcf Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 26 Oct 2018 15:28:55 +0300 Subject: [PATCH 230/726] x86/ldt: Unmap PTEs for the slot before freeing LDT pages modify_ldt(2) leaves the old LDT mapped after switching over to the new one. The old LDT gets freed and the pages can be re-used. Leaving the mapping in place can have security implications. The mapping is present in the userspace page tables and Meltdown-like attacks can read these freed and possibly reused pages. It's relatively simple to fix: unmap the old LDT and flush TLB before freeing the old LDT memory. This further allows to avoid flushing the TLB in map_ldt_struct() as the slot is unmapped and flushed by unmap_ldt_struct() or has never been mapped at all. [ tglx: Massaged changelog and removed the needless line breaks ] Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by: Kirill A. Shutemov Signed-off-by: Thomas Gleixner Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-3-kirill.shutemov@linux.intel.com --- arch/x86/kernel/ldt.c | 51 ++++++++++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index ab18e0884dc6..18e4525c5933 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -199,14 +199,6 @@ static void sanity_check_ldt_mapping(struct mm_struct *mm) /* * If PTI is enabled, this maps the LDT into the kernelmode and * usermode tables for the given mm. - * - * There is no corresponding unmap function. Even if the LDT is freed, we - * leave the PTEs around until the slot is reused or the mm is destroyed. - * This is harmless: the LDT is always in ordinary memory, and no one will - * access the freed slot. - * - * If we wanted to unmap freed LDTs, we'd also need to do a flush to make - * it useful, and the flush would slow down modify_ldt(). */ static int map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) @@ -214,8 +206,8 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) unsigned long va; bool is_vmalloc; spinlock_t *ptl; + int i, nr_pages; pgd_t *pgd; - int i; if (!static_cpu_has(X86_FEATURE_PTI)) return 0; @@ -238,7 +230,9 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) is_vmalloc = is_vmalloc_addr(ldt->entries); - for (i = 0; i * PAGE_SIZE < ldt->nr_entries * LDT_ENTRY_SIZE; i++) { + nr_pages = DIV_ROUND_UP(ldt->nr_entries * LDT_ENTRY_SIZE, PAGE_SIZE); + + for (i = 0; i < nr_pages; i++) { unsigned long offset = i << PAGE_SHIFT; const void *src = (char *)ldt->entries + offset; unsigned long pfn; @@ -272,13 +266,39 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) /* Propagate LDT mapping to the user page-table */ map_ldt_struct_to_user(mm); - va = (unsigned long)ldt_slot_va(slot); - flush_tlb_mm_range(mm, va, va + LDT_SLOT_STRIDE, PAGE_SHIFT, false); - ldt->slot = slot; return 0; } +static void unmap_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt) +{ + unsigned long va; + int i, nr_pages; + + if (!ldt) + return; + + /* LDT map/unmap is only required for PTI */ + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + nr_pages = DIV_ROUND_UP(ldt->nr_entries * LDT_ENTRY_SIZE, PAGE_SIZE); + + for (i = 0; i < nr_pages; i++) { + unsigned long offset = i << PAGE_SHIFT; + spinlock_t *ptl; + pte_t *ptep; + + va = (unsigned long)ldt_slot_va(ldt->slot) + offset; + ptep = get_locked_pte(mm, va, &ptl); + pte_clear(mm, va, ptep); + pte_unmap_unlock(ptep, ptl); + } + + va = (unsigned long)ldt_slot_va(ldt->slot); + flush_tlb_mm_range(mm, va, va + nr_pages * PAGE_SIZE, PAGE_SHIFT, false); +} + #else /* !CONFIG_PAGE_TABLE_ISOLATION */ static int @@ -286,6 +306,10 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) { return 0; } + +static void unmap_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt) +{ +} #endif /* CONFIG_PAGE_TABLE_ISOLATION */ static void free_ldt_pgtables(struct mm_struct *mm) @@ -524,6 +548,7 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode) } install_ldt(mm, new_ldt); + unmap_ldt_struct(mm, old_ldt); free_ldt_struct(old_ldt); error = 0; From b082f2dd80612015cd6d9d84e52099734ec9a0e1 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 26 Oct 2018 15:28:56 +0300 Subject: [PATCH 231/726] x86/ldt: Remove unused variable in map_ldt_struct() Splitting out the sanity check in map_ldt_struct() moved page table syncing into a separate function, which made the pgd variable unused. Remove it. [ tglx: Massaged changelog ] Fixes: 9bae3197e15d ("x86/ldt: Split out sanity check in map_ldt_struct()") Signed-off-by: Kirill A. Shutemov Signed-off-by: Thomas Gleixner Reviewed-by: Andy Lutomirski Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-4-kirill.shutemov@linux.intel.com --- arch/x86/kernel/ldt.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 18e4525c5933..6135ae8ce036 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -207,7 +207,6 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) bool is_vmalloc; spinlock_t *ptl; int i, nr_pages; - pgd_t *pgd; if (!static_cpu_has(X86_FEATURE_PTI)) return 0; @@ -221,13 +220,6 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot) /* Check if the current mappings are sane */ sanity_check_ldt_mapping(mm); - /* - * Did we already have the top level entry allocated? We can't - * use pgd_none() for this because it doens't do anything on - * 4-level page table kernels. - */ - pgd = pgd_offset(mm, LDT_BASE_ADDR); - is_vmalloc = is_vmalloc_addr(ldt->entries); nr_pages = DIV_ROUND_UP(ldt->nr_entries * LDT_ENTRY_SIZE, PAGE_SIZE); From a48777fdda7d13179979a889e1fb87655a783cc0 Mon Sep 17 00:00:00 2001 From: Eial Czerwacki Date: Mon, 5 Nov 2018 19:31:54 +0200 Subject: [PATCH 232/726] x86/vsmp: Remove dependency on pv_irq_ops vSMP dependency on pv_irq_ops has been removed some years ago, but the code still deals with pv_irq_ops. In short, "cap & ctl & (1 << 4)" is always returning 0, so all PARAVIRT/PARAVIRT_XXL code related to that can be removed. However, the rest of the code depends on CONFIG_PCI, so fix it accordingly. Rename set_vsmp_pv_ops to set_vsmp_ctl as the original name does not make sense anymore. Signed-off-by: Eial Czerwacki Signed-off-by: Thomas Gleixner Acked-by: Shai Fultheim Cc: Juergen Gross Link: https://lkml.kernel.org/r/1541439114-28297-1-git-send-email-eial@scalemp.com --- arch/x86/Kconfig | 1 - arch/x86/kernel/vsmp_64.c | 84 ++++----------------------------------- 2 files changed, 7 insertions(+), 78 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ba7e3464ee92..9d734f3c8234 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -525,7 +525,6 @@ config X86_VSMP bool "ScaleMP vSMP" select HYPERVISOR_GUEST select PARAVIRT - select PARAVIRT_XXL depends on X86_64 && PCI depends on X86_EXTENDED_PLATFORM depends on SMP diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index 1eae5af491c2..891a75dbc131 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -26,65 +26,8 @@ #define TOPOLOGY_REGISTER_OFFSET 0x10 -#if defined CONFIG_PCI && defined CONFIG_PARAVIRT_XXL -/* - * Interrupt control on vSMPowered systems: - * ~AC is a shadow of IF. If IF is 'on' AC should be 'off' - * and vice versa. - */ - -asmlinkage __visible unsigned long vsmp_save_fl(void) -{ - unsigned long flags = native_save_fl(); - - if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC)) - flags &= ~X86_EFLAGS_IF; - return flags; -} -PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl); - -__visible void vsmp_restore_fl(unsigned long flags) -{ - if (flags & X86_EFLAGS_IF) - flags &= ~X86_EFLAGS_AC; - else - flags |= X86_EFLAGS_AC; - native_restore_fl(flags); -} -PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl); - -asmlinkage __visible void vsmp_irq_disable(void) -{ - unsigned long flags = native_save_fl(); - - native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC); -} -PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable); - -asmlinkage __visible void vsmp_irq_enable(void) -{ - unsigned long flags = native_save_fl(); - - native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); -} -PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable); - -static unsigned __init vsmp_patch(u8 type, void *ibuf, - unsigned long addr, unsigned len) -{ - switch (type) { - case PARAVIRT_PATCH(irq.irq_enable): - case PARAVIRT_PATCH(irq.irq_disable): - case PARAVIRT_PATCH(irq.save_fl): - case PARAVIRT_PATCH(irq.restore_fl): - return paravirt_patch_default(type, ibuf, addr, len); - default: - return native_patch(type, ibuf, addr, len); - } - -} - -static void __init set_vsmp_pv_ops(void) +#ifdef CONFIG_PCI +static void __init set_vsmp_ctl(void) { void __iomem *address; unsigned int cap, ctl, cfg; @@ -109,28 +52,12 @@ static void __init set_vsmp_pv_ops(void) } #endif - if (cap & ctl & (1 << 4)) { - /* Setup irq ops and turn on vSMP IRQ fastpath handling */ - pv_ops.irq.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable); - pv_ops.irq.irq_enable = PV_CALLEE_SAVE(vsmp_irq_enable); - pv_ops.irq.save_fl = PV_CALLEE_SAVE(vsmp_save_fl); - pv_ops.irq.restore_fl = PV_CALLEE_SAVE(vsmp_restore_fl); - pv_ops.init.patch = vsmp_patch; - ctl &= ~(1 << 4); - } writel(ctl, address + 4); ctl = readl(address + 4); pr_info("vSMP CTL: control set to:0x%08x\n", ctl); early_iounmap(address, 8); } -#else -static void __init set_vsmp_pv_ops(void) -{ -} -#endif - -#ifdef CONFIG_PCI static int is_vsmp = -1; static void __init detect_vsmp_box(void) @@ -164,11 +91,14 @@ static int is_vsmp_box(void) { return 0; } +static void __init set_vsmp_ctl(void) +{ +} #endif static void __init vsmp_cap_cpus(void) { -#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP) +#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP) && defined(CONFIG_PCI) void __iomem *address; unsigned int cfg, topology, node_shift, maxcpus; @@ -221,6 +151,6 @@ void __init vsmp_init(void) vsmp_cap_cpus(); - set_vsmp_pv_ops(); + set_vsmp_ctl(); return; } From 86a484bda787d542d4a968bd7742bcf844c8adb2 Mon Sep 17 00:00:00 2001 From: Leo Li Date: Tue, 30 Oct 2018 15:09:08 -0400 Subject: [PATCH 233/726] drm/amd: Update atom_smu_info_v3_3 structure Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/atomfirmware.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index d2e7c0fa96c2..8eb0bb241210 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -1325,7 +1325,7 @@ struct atom_smu_info_v3_3 { struct atom_common_table_header table_header; uint8_t smuip_min_ver; uint8_t smuip_max_ver; - uint8_t smu_rsd1; + uint8_t waflclk_ss_mode; uint8_t gpuclk_ss_mode; uint16_t sclk_ss_percentage; uint16_t sclk_ss_rate_10hz; @@ -1355,7 +1355,10 @@ struct atom_smu_info_v3_3 { uint32_t syspll3_1_vco_freq_10khz; uint32_t bootup_fclk_10khz; uint32_t bootup_waflclk_10khz; - uint32_t reserved[3]; + uint32_t smu_info_caps; + uint16_t waflclk_ss_percentage; // in unit of 0.001% + uint16_t smuinitoffset; + uint32_t reserved; }; /* From ce317dd9f809c8da9656c88761e30f0a82a8c2e6 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:50 -0700 Subject: [PATCH 234/726] ice: Set carrier state and start/stop queues in rebuild Set the carrier state post rebuild by querying the link status. Also start/stop queues based on link status. Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_main.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 05993451147a..6d31ffb64940 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3296,7 +3296,7 @@ static void ice_rebuild(struct ice_pf *pf) struct device *dev = &pf->pdev->dev; struct ice_hw *hw = &pf->hw; enum ice_status ret; - int err; + int err, i; if (test_bit(__ICE_DOWN, pf->state)) goto clear_recovery; @@ -3370,6 +3370,22 @@ static void ice_rebuild(struct ice_pf *pf) } ice_reset_all_vfs(pf, true); + + for (i = 0; i < pf->num_alloc_vsi; i++) { + bool link_up; + + if (!pf->vsi[i] || pf->vsi[i]->type != ICE_VSI_PF) + continue; + ice_get_link_status(pf->vsi[i]->port_info, &link_up); + if (link_up) { + netif_carrier_on(pf->vsi[i]->netdev); + netif_tx_wake_all_queues(pf->vsi[i]->netdev); + } else { + netif_carrier_off(pf->vsi[i]->netdev); + netif_tx_stop_all_queues(pf->vsi[i]->netdev); + } + } + /* if we get here, reset flow is successful */ clear_bit(__ICE_RESET_FAILED, pf->state); return; From afd9d4ab58db20029a75cf82f23b6a5641cd7d6f Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:51 -0700 Subject: [PATCH 235/726] ice: Check for reset in progress during remove The remove path does not currently check to see if a reset is in progress before proceeding. This can cause a resource collision resulting in various types of errors. Check for reset in progress and wait for a reasonable amount of time before allowing the remove to progress. Signed-off-by: Dave Ertman Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 2 ++ drivers/net/ethernet/intel/ice/ice_main.c | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 4c4b5717a627..e5b37fa60884 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -76,6 +76,8 @@ extern const char ice_drv_ver[]; #define ICE_MIN_INTR_PER_VF (ICE_MIN_QS_PER_VF + 1) #define ICE_DFLT_INTR_PER_VF (ICE_DFLT_QS_PER_VF + 1) +#define ICE_MAX_RESET_WAIT 20 + #define ICE_VSIQF_HKEY_ARRAY_SIZE ((VSIQF_HKEY_MAX_INDEX + 1) * 4) #define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 6d31ffb64940..aee22f11a41a 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -2182,6 +2182,12 @@ static void ice_remove(struct pci_dev *pdev) if (!pf) return; + for (i = 0; i < ICE_MAX_RESET_WAIT; i++) { + if (!ice_is_reset_in_progress(pf->state)) + break; + msleep(100); + } + set_bit(__ICE_DOWN, pf->state); ice_service_task_stop(pf); From 0f5d4c21a50716f8bd4e220544b82dca7408d113 Mon Sep 17 00:00:00 2001 From: Akeem G Abodunrin Date: Fri, 26 Oct 2018 10:40:52 -0700 Subject: [PATCH 236/726] ice: Fix dead device link issue with flow control Setting Rx or Tx pause parameter currently results in link loss on the interface, requiring the platform/host to be cold power cycled. Fix it. Signed-off-by: Akeem G Abodunrin Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 96923580f2a6..648acdb4c644 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1517,10 +1517,15 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) } if (!test_bit(__ICE_DOWN, pf->state)) { - /* Give it a little more time to try to come back */ + /* Give it a little more time to try to come back. If still + * down, restart autoneg link or reinitialize the interface. + */ msleep(75); if (!test_bit(__ICE_DOWN, pf->state)) return ice_nway_reset(netdev); + + ice_down(vsi); + ice_up(vsi); } return err; From 33e055fcc26909b1d66b5d1f334aee38356068d7 Mon Sep 17 00:00:00 2001 From: Victor Raj Date: Fri, 26 Oct 2018 10:40:53 -0700 Subject: [PATCH 237/726] ice: Free VSI contexts during for unload In the unload path, all VSIs are freed. Also free the related VSI contexts to prevent memory leaks. Signed-off-by: Victor Raj Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_common.c | 3 +++ drivers/net/ethernet/intel/ice/ice_switch.c | 12 ++++++++++++ drivers/net/ethernet/intel/ice/ice_switch.h | 2 ++ 3 files changed, 17 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 8cd6a2401fd9..554fd707a6d6 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -811,6 +811,9 @@ void ice_deinit_hw(struct ice_hw *hw) /* Attempt to disable FW logging before shutting down control queues */ ice_cfg_fw_log(hw, false); ice_shutdown_all_ctrlq(hw); + + /* Clear VSI contexts if not already cleared */ + ice_clear_all_vsi_ctx(hw); } /** diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c index 33403f39f1b3..40c9c6558956 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.c +++ b/drivers/net/ethernet/intel/ice/ice_switch.c @@ -347,6 +347,18 @@ static void ice_clear_vsi_ctx(struct ice_hw *hw, u16 vsi_handle) } } +/** + * ice_clear_all_vsi_ctx - clear all the VSI context entries + * @hw: pointer to the hw struct + */ +void ice_clear_all_vsi_ctx(struct ice_hw *hw) +{ + u16 i; + + for (i = 0; i < ICE_MAX_VSI; i++) + ice_clear_vsi_ctx(hw, i); +} + /** * ice_add_vsi - add VSI context to the hardware and VSI handle list * @hw: pointer to the hw struct diff --git a/drivers/net/ethernet/intel/ice/ice_switch.h b/drivers/net/ethernet/intel/ice/ice_switch.h index b88d96a1ef69..d5ef0bd58bf9 100644 --- a/drivers/net/ethernet/intel/ice/ice_switch.h +++ b/drivers/net/ethernet/intel/ice/ice_switch.h @@ -190,6 +190,8 @@ ice_update_vsi(struct ice_hw *hw, u16 vsi_handle, struct ice_vsi_ctx *vsi_ctx, struct ice_sq_cd *cd); bool ice_is_vsi_valid(struct ice_hw *hw, u16 vsi_handle); struct ice_vsi_ctx *ice_get_vsi_ctx(struct ice_hw *hw, u16 vsi_handle); +void ice_clear_all_vsi_ctx(struct ice_hw *hw); +/* Switch config */ enum ice_status ice_get_initial_sw_cfg(struct ice_hw *hw); /* Switch/bridge related commands */ From 9ecd25c26810a61b9c3abc6c73de32dca6da96e1 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:54 -0700 Subject: [PATCH 238/726] ice: Remove duplicate addition of VLANs in replay path ice_restore_vlan and active_vlans were originally put in place to reprogram VLAN filters in the replay path. This is now done as part of the much broader VSI rebuild/replay framework. So remove both ice_restore_vlan and active_vlans Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 1 - drivers/net/ethernet/intel/ice/ice_main.c | 42 +++---------------- .../net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 - 3 files changed, 6 insertions(+), 39 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index e5b37fa60884..1639e955f158 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -191,7 +191,6 @@ struct ice_vsi { u64 tx_linearize; DECLARE_BITMAP(state, __ICE_STATE_NBITS); DECLARE_BITMAP(flags, ICE_VSI_FLAG_NBITS); - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; unsigned int current_netdev_flags; u32 tx_restart; u32 tx_busy; diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index aee22f11a41a..338abb1b9233 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1622,7 +1622,6 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, { struct ice_netdev_priv *np = netdev_priv(netdev); struct ice_vsi *vsi = np->vsi; - int ret; if (vid >= VLAN_N_VID) { netdev_err(netdev, "VLAN id requested %d is out of range %d\n", @@ -1635,7 +1634,8 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, /* Enable VLAN pruning when VLAN 0 is added */ if (unlikely(!vid)) { - ret = ice_cfg_vlan_pruning(vsi, true); + int ret = ice_cfg_vlan_pruning(vsi, true); + if (ret) return ret; } @@ -1644,12 +1644,7 @@ static int ice_vlan_rx_add_vid(struct net_device *netdev, * needed to continue allowing all untagged packets since VLAN prune * list is applied to all packets by the switch */ - ret = ice_vsi_add_vlan(vsi, vid); - - if (!ret) - set_bit(vid, vsi->active_vlans); - - return ret; + return ice_vsi_add_vlan(vsi, vid); } /** @@ -1677,8 +1672,6 @@ static int ice_vlan_rx_kill_vid(struct net_device *netdev, if (status) return status; - clear_bit(vid, vsi->active_vlans); - /* Disable VLAN pruning when VLAN 0 is removed */ if (unlikely(!vid)) status = ice_cfg_vlan_pruning(vsi, false); @@ -2515,31 +2508,6 @@ static int ice_vsi_vlan_setup(struct ice_vsi *vsi) return ret; } -/** - * ice_restore_vlan - Reinstate VLANs when vsi/netdev comes back up - * @vsi: the VSI being brought back up - */ -static int ice_restore_vlan(struct ice_vsi *vsi) -{ - int err; - u16 vid; - - if (!vsi->netdev) - return -EINVAL; - - err = ice_vsi_vlan_setup(vsi); - if (err) - return err; - - for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID) { - err = ice_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q), vid); - if (err) - break; - } - - return err; -} - /** * ice_vsi_cfg - Setup the VSI * @vsi: the VSI being configured @@ -2552,7 +2520,9 @@ static int ice_vsi_cfg(struct ice_vsi *vsi) if (vsi->netdev) { ice_set_rx_mode(vsi->netdev); - err = ice_restore_vlan(vsi); + + err = ice_vsi_vlan_setup(vsi); + if (err) return err; } diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index 45f10f8f01dc..9576b958622b 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -2171,7 +2171,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v) if (!ice_vsi_add_vlan(vsi, vid)) { vf->num_vlan++; - set_bit(vid, vsi->active_vlans); /* Enable VLAN pruning when VLAN 0 is added */ if (unlikely(!vid)) @@ -2190,7 +2189,6 @@ static int ice_vc_process_vlan_msg(struct ice_vf *vf, u8 *msg, bool add_v) */ if (!ice_vsi_kill_vlan(vsi, vid)) { vf->num_vlan--; - clear_bit(vid, vsi->active_vlans); /* Disable VLAN pruning when removing VLAN 0 */ if (unlikely(!vid)) From 58297dd133f64ea028e7d52dd00cd9ff8aa4479f Mon Sep 17 00:00:00 2001 From: Md Fahad Iqbal Polash Date: Fri, 26 Oct 2018 10:40:55 -0700 Subject: [PATCH 239/726] ice: Fix flags for port VLAN According to the spec, whenever insert PVID field is set, the VLAN driver insertion mode should be set to 01b which isn't done currently. Fix it. Signed-off-by: Md Fahad Iqbal Polash Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index 9576b958622b..e71065f9d391 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -348,7 +348,7 @@ static int ice_vsi_set_pvid(struct ice_vsi *vsi, u16 vid) struct ice_vsi_ctx ctxt = { 0 }; enum ice_status status; - ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_TAGGED | + ctxt.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_UNTAGGED | ICE_AQ_VSI_PVLAN_INSERT_PVID | ICE_AQ_VSI_VLAN_EMOD_STR; ctxt.info.pvid = cpu_to_le16(vid); From 31082519c11b01fe1fb6dd512055f252812c1508 Mon Sep 17 00:00:00 2001 From: Anirudh Venkataramanan Date: Fri, 26 Oct 2018 10:40:56 -0700 Subject: [PATCH 240/726] ice: Fix typo in error message Print should say "Enabling" instead of "Enaabling" Signed-off-by: Akeem G Abodunrin Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 5bacad01f0c9..c604a44c8cfb 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -1997,7 +1997,7 @@ int ice_cfg_vlan_pruning(struct ice_vsi *vsi, bool ena) status = ice_update_vsi(&vsi->back->hw, vsi->idx, ctxt, NULL); if (status) { netdev_err(vsi->netdev, "%sabling VLAN pruning on VSI handle: %d, VSI HW ID: %d failed, err = %d, aq_err = %d\n", - ena ? "Ena" : "Dis", vsi->idx, vsi->vsi_num, status, + ena ? "En" : "Dis", vsi->idx, vsi->vsi_num, status, vsi->back->hw.adminq.sq_last_status); goto err_out; } From 25525b69bb44a628841492f44a5a8e74f34724f4 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Fri, 26 Oct 2018 10:40:57 -0700 Subject: [PATCH 241/726] ice: Fix napi delete calls for remove In the remove path, the vsi->netdev is being set to NULL before the call to free vectors. This is causing the netif_napi_del call to never be made. Add a call to ice_napi_del to the same location as the calls to unregister_netdev and just prior to them. This will use the reverse flow as the register and netif_napi_add calls. Signed-off-by: Dave Ertman Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice.h | 1 + drivers/net/ethernet/intel/ice/ice_lib.c | 1 + drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 1639e955f158..b8548370f1c7 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -370,5 +370,6 @@ int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size); int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size); void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size); void ice_print_link_msg(struct ice_vsi *vsi, bool isup); +void ice_napi_del(struct ice_vsi *vsi); #endif /* _ICE_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index c604a44c8cfb..1041fa2a7767 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2458,6 +2458,7 @@ int ice_vsi_release(struct ice_vsi *vsi) * on this wq */ if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) { + ice_napi_del(vsi); unregister_netdev(vsi->netdev); free_netdev(vsi->netdev); vsi->netdev = NULL; diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 338abb1b9233..82f49dbd762c 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1465,7 +1465,7 @@ skip_req_irq: * ice_napi_del - Remove NAPI handler for the VSI * @vsi: VSI for which NAPI handler is to be removed */ -static void ice_napi_del(struct ice_vsi *vsi) +void ice_napi_del(struct ice_vsi *vsi) { int v_idx; From c585ea42ec75e8d3afa278b7095d9f0dd6ee515b Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Fri, 26 Oct 2018 10:40:58 -0700 Subject: [PATCH 242/726] ice: Fix tx_timeout in PF driver Prior to this commit the driver was running into tx_timeouts when a queue was stressed enough. This was happening because the HW tail and SW tail (NTU) were incorrectly out of sync. Consequently this was causing the HW head to collide with the HW tail, which to the hardware means that all descriptors posted for Tx have been processed. Due to the Tx logic used in the driver SW tail and HW tail are allowed to be out of sync. This is done as an optimization because it allows the driver to write HW tail as infrequently as possible, while still updating the SW tail index to keep track. However, there are situations where this results in the tail never getting updated, resulting in Tx timeouts. Tx HW tail write condition: if (netif_xmit_stopped(txring_txq(tx_ring) || !skb->xmit_more) writel(sw_tail, tx_ring->tail); An issue was found in the Tx logic that was causing the afore mentioned condition for updating HW tail to never happen, causing tx_timeouts. In ice_xmit_frame_ring we calculate how many descriptors we need for the Tx transaction based on the skb the kernel hands us. This is then passed into ice_maybe_stop_tx along with some extra padding to determine if we have enough descriptors available for this transaction. If we don't then we return -EBUSY to the stack, otherwise we move on and eventually prepare the Tx descriptors accordingly in ice_tx_map and set next_to_watch. In ice_tx_map we make another call to ice_maybe_stop_tx with a value of MAX_SKB_FRAGS + 4. The key here is that this value is possibly less than the value we sent in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring. Now, if the number of unused descriptors is between MAX_SKB_FRAGS + 4 and the value used in the first call to ice_maybe_stop_tx in ice_xmit_frame_ring then we do not update the HW tail because of the "Tx HW tail write condition" above. This is because in ice_maybe_stop_tx we return success from ice_maybe_stop_tx instead of calling __ice_maybe_stop_tx and subsequently calling netif_stop_subqueue, which sets the __QUEUE_STATE_DEV_XOFF bit. This bit is then checked in the "Tx HW tail write condition" by calling netif_xmit_stopped and subsequently updating HW tail if the afore mentioned bit is set. In ice_clean_tx_irq, if next_to_watch is not NULL, we end up cleaning the descriptors that HW sets the DD bit on and we have the budget. The HW head will eventually run into the HW tail in response to the description in the paragraph above. The next time through ice_xmit_frame_ring we make the initial call to ice_maybe_stop_tx with another skb from the stack. This time we do not have enough descriptors available and we return NETDEV_TX_BUSY to the stack and end up setting next_to_watch to NULL. This is where we are stuck. In ice_clean_tx_irq we never clean anything because next_to_watch is always NULL and in ice_xmit_frame_ring we never update HW tail because we already return NETDEV_TX_BUSY to the stack and eventually we hit a tx_timeout. This issue was fixed by making sure that the second call to ice_maybe_stop_tx in ice_tx_map is passed a value that is >= the value that was used on the initial call to ice_maybe_stop_tx in ice_xmit_frame_ring. This was done by adding the following defines to make the logic more clear and to reduce the chance of mucking this up again: ICE_CACHE_LINE_BYTES 64 ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \ sizeof(struct ice_tx_desc)) ICE_DESCS_FOR_CTX_DESC 1 ICE_DESCS_FOR_SKB_DATA_PTR 1 The ICE_CACHE_LINE_BYTES being 64 is an assumption being made so we don't have to figure this out on every pass through the Tx path. Instead I added a sanity check in ice_probe to verify cache line size and print a message if it's not 64 Bytes. This will make it easier to file issues if they are seen when the cache line size is not 64 Bytes when reading from the GLPCI_CNF2 register. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ice/ice_hw_autogen.h | 2 ++ drivers/net/ethernet/intel/ice/ice_main.c | 18 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_txrx.c | 9 +++++---- drivers/net/ethernet/intel/ice/ice_txrx.h | 17 +++++++++++++++-- 4 files changed, 40 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h index 5fdea6ec7675..596b9fb1c510 100644 --- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h +++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h @@ -242,6 +242,8 @@ #define GLNVM_ULD 0x000B6008 #define GLNVM_ULD_CORER_DONE_M BIT(3) #define GLNVM_ULD_GLOBR_DONE_M BIT(4) +#define GLPCI_CNF2 0x000BE004 +#define GLPCI_CNF2_CACHELINE_SIZE_M BIT(1) #define PF_FUNC_RID 0x0009E880 #define PF_FUNC_RID_FUNC_NUM_S 0 #define PF_FUNC_RID_FUNC_NUM_M ICE_M(0x7, 0) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 82f49dbd762c..333312a1d595 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1994,6 +1994,22 @@ static int ice_init_interrupt_scheme(struct ice_pf *pf) return 0; } +/** + * ice_verify_cacheline_size - verify driver's assumption of 64 Byte cache lines + * @pf: pointer to the PF structure + * + * There is no error returned here because the driver should be able to handle + * 128 Byte cache lines, so we only print a warning in case issues are seen, + * specifically with Tx. + */ +static void ice_verify_cacheline_size(struct ice_pf *pf) +{ + if (rd32(&pf->hw, GLPCI_CNF2) & GLPCI_CNF2_CACHELINE_SIZE_M) + dev_warn(&pf->pdev->dev, + "%d Byte cache line assumption is invalid, driver may have Tx timeouts!\n", + ICE_CACHE_LINE_BYTES); +} + /** * ice_probe - Device initialization routine * @pdev: PCI device information struct @@ -2144,6 +2160,8 @@ static int ice_probe(struct pci_dev *pdev, /* since everything is good, start the service timer */ mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); + ice_verify_cacheline_size(pf); + return 0; err_alloc_sw_unroll: diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 5dae968d853e..3387c67c848d 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -1556,15 +1556,15 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off) * magnitude greater than our largest possible GSO size. * * This would then be implemented as: - * return (((size >> 12) * 85) >> 8) + 1; + * return (((size >> 12) * 85) >> 8) + ICE_DESCS_FOR_SKB_DATA_PTR; * * Since multiplication and division are commutative, we can reorder * operations into: - * return ((size * 85) >> 20) + 1; + * return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR; */ static unsigned int ice_txd_use_count(unsigned int size) { - return ((size * 85) >> 20) + 1; + return ((size * 85) >> 20) + ICE_DESCS_FOR_SKB_DATA_PTR; } /** @@ -1706,7 +1706,8 @@ ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring) * + 1 desc for context descriptor, * otherwise try next time */ - if (ice_maybe_stop_tx(tx_ring, count + 4 + 1)) { + if (ice_maybe_stop_tx(tx_ring, count + ICE_DESCS_PER_CACHE_LINE + + ICE_DESCS_FOR_CTX_DESC)) { tx_ring->tx_stats.tx_busy++; return NETDEV_TX_BUSY; } diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h index 1d0f58bd389b..75d0eaf6c9dd 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.h +++ b/drivers/net/ethernet/intel/ice/ice_txrx.h @@ -22,8 +22,21 @@ #define ICE_RX_BUF_WRITE 16 /* Must be power of 2 */ #define ICE_MAX_TXQ_PER_TXQG 128 -/* Tx Descriptors needed, worst case */ -#define DESC_NEEDED (MAX_SKB_FRAGS + 4) +/* We are assuming that the cache line is always 64 Bytes here for ice. + * In order to make sure that is a correct assumption there is a check in probe + * to print a warning if the read from GLPCI_CNF2 tells us that the cache line + * size is 128 bytes. We do it this way because we do not want to read the + * GLPCI_CNF2 register or a variable containing the value on every pass through + * the Tx path. + */ +#define ICE_CACHE_LINE_BYTES 64 +#define ICE_DESCS_PER_CACHE_LINE (ICE_CACHE_LINE_BYTES / \ + sizeof(struct ice_tx_desc)) +#define ICE_DESCS_FOR_CTX_DESC 1 +#define ICE_DESCS_FOR_SKB_DATA_PTR 1 +/* Tx descriptors needed, worst case */ +#define DESC_NEEDED (MAX_SKB_FRAGS + ICE_DESCS_FOR_CTX_DESC + \ + ICE_DESCS_PER_CACHE_LINE + ICE_DESCS_FOR_SKB_DATA_PTR) #define ICE_DESC_UNUSED(R) \ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ (R)->next_to_clean - (R)->next_to_use - 1) From d944b46992f8e99b6bdc721e44b02e5ca294fa2b Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Fri, 26 Oct 2018 10:40:59 -0700 Subject: [PATCH 243/726] ice: Fix the bytecount sent to netdev_tx_sent_queue Currently if the driver does a TSO offload the bytecount sent to netdev_tx_sent_queue will be incorrect. This is because in ice_tso we overwrite the initial value that we set in ice_tx_map. This creates a mismatch between the Tx and Tx clean flow. In the Tx clean flow we calculate the bytecount (called total_bytes) as we clean the descriptors so the value used in the Tx clean path is correct. Fix this by using += in ice_tso instead of =. This fixes the mismatch in bytecount mentioned above. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 3387c67c848d..fe5bbabbb41e 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -1520,7 +1520,7 @@ int ice_tso(struct ice_tx_buf *first, struct ice_tx_offload_params *off) /* update gso_segs and bytecount */ first->gso_segs = skb_shinfo(skb)->gso_segs; - first->bytecount = (first->gso_segs - 1) * off->header_len; + first->bytecount += (first->gso_segs - 1) * off->header_len; cd_tso_len = skb->len - off->header_len; cd_mss = skb_shinfo(skb)->gso_size; From 4c9b658eeaefedd402a59e858d8ac3bfdf6153e3 Mon Sep 17 00:00:00 2001 From: Miroslav Lichvar Date: Fri, 26 Oct 2018 19:13:00 +0200 Subject: [PATCH 244/726] igb: shorten maximum PHC timecounter update interval The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9de65 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Also, the PHC may be adjusted to run up to 6% faster than real time and the system clock up to 10% slower. Shorten the delay to 360 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Thomas Gleixner Signed-off-by: Miroslav Lichvar Acked-by: Jacob Keller Acked-by: Richard Cochran Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ptp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 29ced6b74d36..2b95dc9c7a6a 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -53,13 +53,15 @@ * 2^40 * 10^-9 / 60 = 18.3 minutes. * * SYSTIM is converted to real time using a timecounter. As - * timecounter_cyc2time() allows old timestamps, the timecounter - * needs to be updated at least once per half of the SYSTIM interval. - * Scheduling of delayed work is not very accurate, so we aim for 8 - * minutes to be sure the actual interval is shorter than 9.16 minutes. + * timecounter_cyc2time() allows old timestamps, the timecounter needs + * to be updated at least once per half of the SYSTIM interval. + * Scheduling of delayed work is not very accurate, and also the NIC + * clock can be adjusted to run up to 6% faster and the system clock + * up to 10% slower, so we aim for 6 minutes to be sure the actual + * interval in the NIC time is shorter than 9.16 minutes. */ -#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 8) +#define IGB_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 6) #define IGB_PTP_TX_TIMEOUT (HZ * 15) #define INCPERIOD_82576 BIT(E1000_TIMINCA_16NS_SHIFT) #define INCVALUE_82576_MASK GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0) From 81bd415c91eb966118d773dddf254aebf3022411 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Wed, 6 Jun 2018 21:42:32 +0200 Subject: [PATCH 245/726] watchdog/core: Add missing prototypes for weak functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The split out of the hard lockup detector exposed two new weak functions, but no prototypes for them, which triggers the build warning: kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes] kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes] Add the prototypes. Fixes: 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file") Signed-off-by: Mathieu Malaterre Signed-off-by: Thomas Gleixner Cc: Babu Moger Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180606194232.17653-1-malat@debian.org --- include/linux/nmi.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 08f9247e9827..9003e29cde46 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -119,6 +119,8 @@ static inline int hardlockup_detector_perf_init(void) { return 0; } void watchdog_nmi_stop(void); void watchdog_nmi_start(void); int watchdog_nmi_probe(void); +int watchdog_nmi_enable(unsigned int cpu); +void watchdog_nmi_disable(unsigned int cpu); /** * touch_nmi_watchdog - restart NMI watchdog timeout. From f348e2241fb73515d65b5d77dd9c174128a7fbf2 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Tue, 6 Nov 2018 16:16:01 -0500 Subject: [PATCH 246/726] ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 3.7 --- fs/ext4/resize.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 3df326ee6d50..5fee65afd58b 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -2022,7 +2022,7 @@ retry: err = ext4_alloc_flex_bg_array(sb, n_group + 1); if (err) - return err; + goto out; err = ext4_mb_alloc_groupinfo(sb, n_group + 1); if (err) From db6aee62406d9fbb53315fcddd81f1dc271d49fa Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Tue, 6 Nov 2018 16:20:40 -0500 Subject: [PATCH 247/726] ext4: fix possible inode leak in the retry loop of ext4_resize_fs() Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 3.7 --- fs/ext4/resize.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 5fee65afd58b..85158e9de7c2 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -2058,6 +2058,10 @@ retry: n_blocks_count_retry = 0; free_flex_gd(flex_gd); flex_gd = NULL; + if (resize_inode) { + iput(resize_inode); + resize_inode = NULL; + } goto retry; } From 63088da9472854408ae5d7c47bd011daf9e1a81b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 16:06:32 -0500 Subject: [PATCH 248/726] Revert "drm/amd/display: set backlight level limit to 1" This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b0df6dc9a775..e224f23e2215 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1524,13 +1524,6 @@ static int amdgpu_dm_backlight_update_status(struct backlight_device *bd) { struct amdgpu_display_manager *dm = bl_get_data(bd); - /* - * PWM interperts 0 as 100% rather than 0% because of HW - * limitation for level 0.So limiting minimum brightness level - * to 1. - */ - if (bd->props.brightness < 1) - return 1; if (dc_link_set_backlight_level(dm->backlight_link, bd->props.brightness, 0, 0)) return 0; From 8ed4ec32d5b1f04a641978322a38a8d7089553bb Mon Sep 17 00:00:00 2001 From: Shaokun Zhang Date: Mon, 5 Nov 2018 18:33:35 +0800 Subject: [PATCH 249/726] drm/amd/display: Fix misleading buffer information RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu Cc: Dmytro Laktyushkin Signed-off-by: Shaokun Zhang Reviewed-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index fb04a4ad141f..5da2186b3615 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting( i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n", + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", slave_address, buffer[0], buffer[1], i2c_success?1:0); if (!i2c_success) /* Write failure */ @@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting( i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n", + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", slave_address, buffer[0], buffer[1], i2c_success?1:0); if (!i2c_success) /* Write failure */ From 02680efbb10be0d2c867fe722ae23d588f6bebef Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Sun, 7 Oct 2018 10:01:23 -0400 Subject: [PATCH 250/726] drm/amd/display: Stop leaking planes [Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e224f23e2215..289ddd52cac4 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3301,7 +3301,7 @@ void dm_drm_plane_destroy_state(struct drm_plane *plane, static const struct drm_plane_funcs dm_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, - .destroy = drm_plane_cleanup, + .destroy = drm_primary_helper_destroy, .reset = dm_drm_plane_reset, .atomic_duplicate_state = dm_drm_plane_duplicate_state, .atomic_destroy_state = dm_drm_plane_destroy_state, From 3426d66d3e74ab0ab264a85e0795a17e3dde1e71 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 11:19:00 -0500 Subject: [PATCH 251/726] drm/amdgpu/vega20: add CLK base offset In case we need to access CLK registers. Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c index 2d4473557b0d..d13fc4fcb517 100644 --- a/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c +++ b/drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c @@ -49,6 +49,7 @@ int vega20_reg_base_init(struct amdgpu_device *adev) adev->reg_offset[SMUIO_HWIP][i] = (uint32_t *)(&(SMUIO_BASE.instance[i])); adev->reg_offset[NBIF_HWIP][i] = (uint32_t *)(&(NBIO_BASE.instance[i])); adev->reg_offset[THM_HWIP][i] = (uint32_t *)(&(THM_BASE.instance[i])); + adev->reg_offset[CLK_HWIP][i] = (uint32_t *)(&(CLK_BASE.instance[i])); } return 0; } From 689e7b34234e29e5168894b27b752a4e16ef08c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Nov 2018 10:51:50 -0500 Subject: [PATCH 252/726] drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index b75ede5f84f7..b459867a05b2 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1736,7 +1736,12 @@ static void set_static_screen_control(struct pipe_ctx **pipe_ctx, if (events->force_trigger) value |= 0x1; - value |= 0x84; + if (num_pipes) { + struct dc *dc = pipe_ctx[0]->stream->ctx->dc; + + if (dc->fbc_compressor) + value |= 0x84; + } for (i = 0; i < num_pipes; i++) pipe_ctx[i]->stream_res.tg->funcs-> From 7875a22625aa7f11befba84bd1e669201032947d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 14:44:29 -0500 Subject: [PATCH 253/726] drm/amdgpu: add DC feature mask module parameter Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 11 +++++++++++ drivers/gpu/drm/amd/include/amd_shared.h | 4 ++++ 3 files changed, 16 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index d0102cfc8efb..104b2e0d893b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -151,6 +151,7 @@ extern int amdgpu_compute_multipipe; extern int amdgpu_gpu_recovery; extern int amdgpu_emu_mode; extern uint amdgpu_smu_memory_pool_size; +extern uint amdgpu_dc_feature_mask; extern struct amdgpu_mgpu_info mgpu_info; #ifdef CONFIG_DRM_AMDGPU_SI diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 943dbf3c5da1..8de55f7f1a3a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -127,6 +127,9 @@ int amdgpu_compute_multipipe = -1; int amdgpu_gpu_recovery = -1; /* auto */ int amdgpu_emu_mode = 0; uint amdgpu_smu_memory_pool_size = 0; +/* FBC (bit 0) disabled by default*/ +uint amdgpu_dc_feature_mask = 0; + struct amdgpu_mgpu_info mgpu_info = { .mutex = __MUTEX_INITIALIZER(mgpu_info.mutex), }; @@ -631,6 +634,14 @@ module_param(halt_if_hws_hang, int, 0644); MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)"); #endif +/** + * DOC: dcfeaturemask (uint) + * Override display features enabled. See enum DC_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h. + * The default is the current set of stable display features. + */ +MODULE_PARM_DESC(dcfeaturemask, "all stable DC features enabled (default))"); +module_param_named(dcfeaturemask, amdgpu_dc_feature_mask, uint, 0444); + static const struct pci_device_id pciidlist[] = { #ifdef CONFIG_DRM_AMDGPU_SI {0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI}, diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index 2083c308007c..470d7b89071a 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -133,6 +133,10 @@ enum PP_FEATURE_MASK { PP_AVFS_MASK = 0x40000, }; +enum DC_FEATURE_MASK { + DC_FBC_MASK = 0x1, +}; + /** * struct amd_ip_funcs - general hooks for managing amdgpu IP Blocks */ From ce2127c462d9d1c0832f088b23158420e87e71a0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 15:10:37 -0500 Subject: [PATCH 254/726] drm/amdgpu/display/dc: add FBC to dc_config Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dc.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 199527171100..b57fa61b3034 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -169,6 +169,7 @@ struct link_training_settings; struct dc_config { bool gpu_vm_support; bool disable_disp_pll_sharing; + bool fbc_support; }; enum visual_confirm { From 04b94af4e348acc52546b9b19c933575f26589a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Nov 2018 15:19:49 -0500 Subject: [PATCH 255/726] drm/amdgpu/display/dm: handle FBC dc feature parameter Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 289ddd52cac4..d3f5cb1795bf 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -429,6 +429,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) adev->asic_type < CHIP_RAVEN) init_data.flags.gpu_vm_support = true; + if (amdgpu_dc_feature_mask & DC_FBC_MASK) + init_data.flags.fbc_support = true; + /* Display Core create. */ adev->dm.dc = dc_create(&init_data); From 5822e9539dc11721b53d74accd4c091b982011d0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Nov 2018 10:54:27 -0500 Subject: [PATCH 256/726] drm/amdgpu/display/dce11: only enable FBC when selected Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c index e3624ca24574..7c9fd9052ee2 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c @@ -1362,7 +1362,8 @@ static bool construct( pool->base.sw_i2cs[i] = NULL; } - dc->fbc_compressor = dce110_compressor_create(ctx); + if (dc->config.fbc_support) + dc->fbc_compressor = dce110_compressor_create(ctx); if (!underlay_create(ctx, &pool->base)) goto res_create_fail; From a6758309a005060b8297a538a457c88699cb2520 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Tue, 6 Nov 2018 16:49:50 -0500 Subject: [PATCH 257/726] ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty() ext4_mark_iloc_dirty() callers expect that it releases iloc->bh even if it returns an error. Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.11 --- fs/ext4/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c3d9a42c561e..55c8fca76daf 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5835,9 +5835,10 @@ int ext4_mark_iloc_dirty(handle_t *handle, { int err = 0; - if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) + if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) { + put_bh(iloc->bh); return -EIO; - + } if (IS_I_VERSION(inode)) inode_inc_iversion(inode); From feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Tue, 6 Nov 2018 17:01:36 -0500 Subject: [PATCH 258/726] ext4: avoid buffer leak in ext4_orphan_add() after prior errors Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 2.6.34 --- fs/ext4/namei.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 67a38532032a..d388cce72db2 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2811,7 +2811,9 @@ int ext4_orphan_add(handle_t *handle, struct inode *inode) list_del_init(&EXT4_I(inode)->i_orphan); mutex_unlock(&sbi->s_orphan_lock); } - } + } else + brelse(iloc.bh); + jbd_debug(4, "superblock will point to %lu\n", inode->i_ino); jbd_debug(4, "orphan inode %lu will point to %d\n", inode->i_ino, NEXT_ORPHAN(inode)); From 4f32c38b4662312dd3c5f113d8bdd459887fb773 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 6 Nov 2018 17:18:17 -0500 Subject: [PATCH 259/726] ext4: avoid possible double brelse() in add_new_gdb() on error path Fixes: b40971426a83 ("ext4: add error checking to calls to ...") Reported-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 2.6.38 --- fs/ext4/resize.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 85158e9de7c2..a5efee34415f 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -871,6 +871,7 @@ static int add_new_gdb(handle_t *handle, struct inode *inode, err = ext4_handle_dirty_metadata(handle, NULL, gdb_bh); if (unlikely(err)) { ext4_std_error(sb, err); + iloc.bh = NULL; goto exit_inode; } brelse(dind); From 1bfc204dc0e7a690ab8440e91bb7d1a324320fdc Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Tue, 6 Nov 2018 17:45:02 -0500 Subject: [PATCH 260/726] ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref() Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index f36fc5d5b257..dc1aeab06dba 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1031,10 +1031,8 @@ static int ext4_xattr_inode_update_ref(handle_t *handle, struct inode *ea_inode, inode_lock(ea_inode); ret = ext4_reserve_inode_write(handle, ea_inode, &iloc); - if (ret) { - iloc.bh = NULL; + if (ret) goto out; - } ref_count = ext4_xattr_inode_get_ref(ea_inode); ref_count += ref_change; @@ -1080,12 +1078,10 @@ static int ext4_xattr_inode_update_ref(handle_t *handle, struct inode *ea_inode, } ret = ext4_mark_iloc_dirty(handle, ea_inode, &iloc); - iloc.bh = NULL; if (ret) ext4_warning_inode(ea_inode, "ext4_mark_iloc_dirty() failed ret=%d", ret); out: - brelse(iloc.bh); inode_unlock(ea_inode); return ret; } From aca49ee041cbdd329c55d4dbcd6b3d4b9af240e4 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 5 Nov 2018 22:49:47 -0500 Subject: [PATCH 261/726] Revert "scsi: ufs: Disable blk-mq for now" This reverts commit d87161bea405e3260377026ca8a704a3f68bd67a. The issues that forced us to disable blk_mq for ufs have been resolved. Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 23d7cca36ff0..27db55b0ca7f 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -8099,13 +8099,6 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM; goto out_error; } - - /* - * Do not use blk-mq at this time because blk-mq does not support - * runtime pm. - */ - host->use_blk_mq = false; - hba = shost_priv(host); hba->host = host; hba->dev = dev; From f635e48e866ee1a47d2d42ce012fdcc07bf55853 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Tue, 6 Nov 2018 00:51:21 -0800 Subject: [PATCH 262/726] scsi: qla2xxx: Initialize port speed to avoid setting lower speed This patch initializes port speed so that firmware does not set lower operating speed. Setting lower speed in firmware impacts WRITE perfomance. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Tested-by: Laurence Oberman Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 6fe20c27acc1..eb59c796a795 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -4763,6 +4763,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) fcport->loop_id = FC_NO_LOOP_ID; qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED); fcport->supported_classes = FC_COS_UNSPECIFIED; + fcport->fp_speed = PORT_SPEED_UNKNOWN; fcport->ct_desc.ct_sns = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &fcport->ct_desc.ct_sns_dma, From 28c5bcf74fa07c25d5bd118d1271920f51ce2a98 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 6 Nov 2018 19:49:34 -0600 Subject: [PATCH 263/726] KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by , so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085151a ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by: Christian Zigotzky Signed-off-by: Scott Wood Signed-off-by: Michael Ellerman --- arch/powerpc/kvm/trace.h | 8 ++++++-- arch/powerpc/kvm/trace_booke.h | 9 +++++++-- arch/powerpc/kvm/trace_hv.h | 9 +++++++-- arch/powerpc/kvm/trace_pr.h | 9 +++++++-- 4 files changed, 27 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h index 491b0f715d6b..ea1d7c808319 100644 --- a/arch/powerpc/kvm/trace.h +++ b/arch/powerpc/kvm/trace.h @@ -6,8 +6,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace /* * Tracepoint for guest mode entry. @@ -120,4 +118,10 @@ TRACE_EVENT(kvm_check_requests, #endif /* _TRACE_KVM_H */ /* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace + #include diff --git a/arch/powerpc/kvm/trace_booke.h b/arch/powerpc/kvm/trace_booke.h index ac640e81fdc5..3837842986aa 100644 --- a/arch/powerpc/kvm/trace_booke.h +++ b/arch/powerpc/kvm/trace_booke.h @@ -6,8 +6,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_booke -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_booke #define kvm_trace_symbol_exit \ {0, "CRITICAL"}, \ @@ -218,4 +216,11 @@ TRACE_EVENT(kvm_booke_queue_irqprio, #endif /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_booke + #include diff --git a/arch/powerpc/kvm/trace_hv.h b/arch/powerpc/kvm/trace_hv.h index bcfe8a987f6a..8a1e3b0047f1 100644 --- a/arch/powerpc/kvm/trace_hv.h +++ b/arch/powerpc/kvm/trace_hv.h @@ -9,8 +9,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_hv -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_hv #define kvm_trace_symbol_hcall \ {H_REMOVE, "H_REMOVE"}, \ @@ -497,4 +495,11 @@ TRACE_EVENT(kvmppc_run_vcpu_exit, #endif /* _TRACE_KVM_HV_H */ /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_hv + #include diff --git a/arch/powerpc/kvm/trace_pr.h b/arch/powerpc/kvm/trace_pr.h index 2f9a8829552b..46a46d328fbf 100644 --- a/arch/powerpc/kvm/trace_pr.h +++ b/arch/powerpc/kvm/trace_pr.h @@ -8,8 +8,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_pr -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_pr TRACE_EVENT(kvm_book3s_reenter, TP_PROTO(int r, struct kvm_vcpu *vcpu), @@ -257,4 +255,11 @@ TRACE_EVENT(kvm_exit, #endif /* _TRACE_KVM_H */ /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_pr + #include From 781f0766cc41a9dd2e5d118ef4b1d5d89430257b Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 19 Oct 2018 16:14:50 +0800 Subject: [PATCH 264/726] USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/admin-guide/kernel-parameters.txt | 2 ++ drivers/usb/core/hub.c | 14 +++++++++++--- drivers/usb/core/quirks.c | 6 ++++++ include/linux/usb/quirks.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 81d1d5a74728..19f4423e70d9 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4713,6 +4713,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c6077d582d29..d9bd7576786a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2794,6 +2794,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2885,11 +2886,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { - /* TRSTRCY = 10 ms; plus some extra */ if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); - else - msleep(10 + 40); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..4d7d948eae63 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index b7a99ce56bc9..a1be64c9940f 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -66,4 +66,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */ From a77112577667cbda7c6292c52d909636aef31fd9 Mon Sep 17 00:00:00 2001 From: Emmanuel Pescosta Date: Fri, 26 Oct 2018 14:48:09 +0200 Subject: [PATCH 265/726] usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4d7d948eae63..64df444af229 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -397,6 +397,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair K70 LUX RGB */ + { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, From deefd24228a172d1b27d4a9adbfd2cdacd60ae64 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 26 Oct 2018 13:33:15 +0800 Subject: [PATCH 266/726] USB: quirks: Add no-lpm quirk for Raydium touchscreens Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 64df444af229..f9ff03e6af93 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -420,6 +420,11 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Raydium Touchscreen */ + { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, + + { USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, From f6501f49199097b99e4e263644d88c90d1ec1060 Mon Sep 17 00:00:00 2001 From: Mattias Jacobsson <2pi@mok.nu> Date: Sun, 21 Oct 2018 11:25:37 +0200 Subject: [PATCH 267/726] USB: misc: appledisplay: add 20" Apple Cinema Display Add another Apple Cinema Display to the list of supported displays Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index bd539f3058bc..85b48c6ddc7e 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -50,6 +50,7 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, + { APPLEDISPLAY_DEVICE(0x9222) }, { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ From 8d72ee3266f08fd3490011ee7b95ffc31e66fd6d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 29 Oct 2018 12:47:40 +0530 Subject: [PATCH 268/726] Documentation: cpu-freq: Frequencies aren't always sorted The order in which the frequencies are displayed in cpufreq stats depends on the order in which the frequencies were sorted in the frequency table provided to cpufreq core by the cpufreq driver. They can be completely unsorted as well. The documentation's claim that the stats will be sorted in descending order is hence incorrect and here is an attempt to fix it. Reported-by: Pavel Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/cpufreq-stats.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index a873855c811d..14378cecb172 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -86,9 +86,11 @@ transitions. This will give a fine grained information about all the CPU frequency transitions. The cat output here is a two dimensional matrix, where an entry (row i, column j) represents the count of number of transitions from -Freq_i to Freq_j. Freq_i is in descending order with increasing rows and -Freq_j is in descending order with increasing columns. The output here also -contains the actual freq values for each row and column for better readability. +Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in +which the driver has provided the frequency table initially to the cpufreq core +and so can be sorted (ascending or descending) or unsorted. The output here +also contains the actual freq values for each row and column for better +readability. If the transition table is bigger than PAGE_SIZE, reading this will return an -EFBIG error. From 6ef28a04d1ccf718eee069b72132ce4aa1e52ab9 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 5 Nov 2018 00:59:28 +0000 Subject: [PATCH 269/726] cpufreq: imx6q: add return value check for voltage scale Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by: Anson Huang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/imx6q-cpufreq.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 8cfee0ab804b..d8c3595e9023 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -160,8 +160,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* Ensure the arm clock divider is what we expect */ ret = clk_set_rate(clks[ARM].clk, new_freq * 1000); if (ret) { + int ret1; + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); - regulator_set_voltage_tol(arm_reg, volt_old, 0); + ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0); + if (ret1) + dev_warn(cpu_dev, + "failed to restore vddarm voltage: %d\n", ret1); return ret; } From e531efa1e92b888acce45785b3ae69278fa712c0 Mon Sep 17 00:00:00 2001 From: Zhao Wei Liew Date: Thu, 1 Nov 2018 01:32:46 +0000 Subject: [PATCH 270/726] Documentation: cpufreq: Correct a typo Fix a typo in the admin-guide documentation for cpufreq. Signed-off-by: Zhao Wei Liew Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- Documentation/admin-guide/pm/cpufreq.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 47153e64dfb5..7eca9026a9ed 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -150,7 +150,7 @@ data structures necessary to handle the given policy and, possibly, to add a governor ``sysfs`` interface to it. Next, the governor is started by invoking its ``->start()`` callback. -That callback it expected to register per-CPU utilization update callbacks for +That callback is expected to register per-CPU utilization update callbacks for all of the online CPUs belonging to the given policy with the CPU scheduler. The utilization update callbacks will be invoked by the CPU scheduler on important events, like task enqueue and dequeue, on every iteration of the From 943126417891372d56aa3fe46295cbf53db31370 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 16 Oct 2018 10:57:48 +0100 Subject: [PATCH 271/726] slimbus: ngd: remove unnecessary check SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core, so performing a check in ngd driver is totally unnecessary. Also this patch fixes warning about mc field overflow reported with CoverityScan. Making clk pause feature optional will be added to slim core in next development cycle. Reported-by: Colin Ian King Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Signed-off-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/slimbus/qcom-ngd-ctrl.c | 3 --- drivers/slimbus/slimbus.h | 6 ------ 2 files changed, 9 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 7218fb963d0a..1382a8df6c75 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -777,9 +777,6 @@ static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl, u8 la = txn->la; bool usr_msg = false; - if (txn->mc & SLIM_MSG_CLK_PAUSE_SEQ_FLG) - return -EPROTONOSUPPORT; - if (txn->mt == SLIM_MSG_MT_CORE && (txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION && txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW)) diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 4399d1873e2d..9be41089edde 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -61,12 +61,6 @@ #define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL 0x58 #define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F -/* - * Clock pause flag to indicate that the reconfig message - * corresponds to clock pause sequence - */ -#define SLIM_MSG_CLK_PAUSE_SEQ_FLG (1U << 8) - /* Clock pause values per SLIMbus spec */ #define SLIM_CLK_FAST 0 #define SLIM_CLK_CONST_PHASE 1 From 9e463084cdb22e0b56b2dfbc50461020409a5fd3 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 7 Nov 2018 10:32:53 -0500 Subject: [PATCH 272/726] ext4: fix possible leak of sbi->s_group_desc_leak in error path Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock") Reported-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.18 --- fs/ext4/super.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index a221f1cdf704..92092b55db1e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4075,6 +4075,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sbi->s_groups_count = blocks_count; sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count, (EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb))); + if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) != + le32_to_cpu(es->s_inodes_count)) { + ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu", + le32_to_cpu(es->s_inodes_count), + ((u64)sbi->s_groups_count * sbi->s_inodes_per_group)); + ret = -EINVAL; + goto failed_mount; + } db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); if (ext4_has_feature_meta_bg(sb)) { @@ -4094,14 +4102,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ret = -ENOMEM; goto failed_mount; } - if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) != - le32_to_cpu(es->s_inodes_count)) { - ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu", - le32_to_cpu(es->s_inodes_count), - ((u64)sbi->s_groups_count * sbi->s_inodes_per_group)); - ret = -EINVAL; - goto failed_mount; - } bgl_lock_init(sbi->s_blockgroup_lock); From f26621e60b35369bca9228bc936dc723b3e421af Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 5 Nov 2018 10:33:07 +0100 Subject: [PATCH 273/726] resource/docs: Complete kernel-doc style function documentation Add the missing kernel-doc style function parameters documentation. Signed-off-by: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: akpm@linux-foundation.org Cc: linux-tip-commits@vger.kernel.org Cc: rdunlap@infradead.org Fixes: b69c2e20f6e4 ("resource: Clean it up a bit") Link: http://lkml.kernel.org/r/20181105093307.GA12445@zn.tnic Signed-off-by: Ingo Molnar --- kernel/resource.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index 17bcb189d530..b0fbf685c77a 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -318,17 +318,24 @@ int release_resource(struct resource *old) EXPORT_SYMBOL(release_resource); -/* - * Finds the lowest iomem resource that covers part of [start..end]. The - * caller must specify start, end, flags, and desc (which may be +/** + * Finds the lowest iomem resource that covers part of [@start..@end]. The + * caller must specify @start, @end, @flags, and @desc (which may be * IORES_DESC_NONE). * - * If a resource is found, returns 0 and *res is overwritten with the part - * of the resource that's within [start..end]; if none is found, returns - * -1. Returns -EINVAL for other invalid parameters. + * If a resource is found, returns 0 and @*res is overwritten with the part + * of the resource that's within [@start..@end]; if none is found, returns + * -1 or -EINVAL for other invalid parameters. * * This function walks the whole tree and not just first level children * unless @first_lvl is true. + * + * @start: start address of the resource searched for + * @end: end address of same resource + * @flags: flags which the resource must have + * @desc: descriptor the resource must have + * @first_lvl: walk only the first level children, if set + * @res: return ptr, if resource found */ static int find_next_iomem_res(resource_size_t start, resource_size_t end, unsigned long flags, unsigned long desc, @@ -390,9 +397,7 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, } /** - * walk_iomem_res_desc - walk through iomem resources - * - * Walks through iomem resources and calls @func() with matching resource + * Walks through iomem resources and calls func() with matching resource * ranges. This walks through whole tree and not just first level children. * All the memory ranges which overlap start,end and also match flags and * desc are valid candidates. From af18e35bfd01e6d65a5e3ef84ffe8b252d1628c5 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 10:56:28 -0500 Subject: [PATCH 274/726] ext4: fix possible leak of s_journal_flag_rwsem in error path Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.7 --- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 92092b55db1e..53ff6c2a26ed 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4510,6 +4510,7 @@ failed_mount6: percpu_counter_destroy(&sbi->s_freeinodes_counter); percpu_counter_destroy(&sbi->s_dirs_counter); percpu_counter_destroy(&sbi->s_dirtyclusters_counter); + percpu_free_rwsem(&sbi->s_journal_flag_rwsem); failed_mount5: ext4_ext_release(sb); ext4_release_system_zone(sb); From ecaaf408478b6fb4d9986f9b6652f3824e374f4c Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 11:01:33 -0500 Subject: [PATCH 275/726] ext4: fix buffer leak in ext4_xattr_get_block() on error path Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.13 --- fs/ext4/xattr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index dc1aeab06dba..07c3a115f7ae 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2272,8 +2272,10 @@ static struct buffer_head *ext4_xattr_get_block(struct inode *inode) if (!bh) return ERR_PTR(-EIO); error = ext4_xattr_check_block(inode, bh); - if (error) + if (error) { + brelse(bh); return ERR_PTR(error); + } return bh; } From 45ae932d246f721e6584430017176cbcadfde610 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 11:07:01 -0500 Subject: [PATCH 276/726] ext4: release bs.bh before re-using in ext4_xattr_block_find() bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 2.6.26 --- fs/ext4/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 07c3a115f7ae..07b9a335c8eb 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2395,6 +2395,8 @@ retry_inode: error = ext4_xattr_block_set(handle, inode, &i, &bs); } else if (error == -ENOSPC) { if (EXT4_I(inode)->i_file_acl && !bs.s.base) { + brelse(bs.bh); + bs.bh = NULL; error = ext4_xattr_block_find(inode, &i, &bs); if (error) goto cleanup; From 6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 11:10:21 -0500 Subject: [PATCH 277/726] ext4: fix buffer leak in ext4_xattr_move_to_block() on error path Fixes: 3f2571c1f91f ("ext4: factor out xattr moving") Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...") Reviewed-by: Jan Kara Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 2.6.23 --- fs/ext4/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 07b9a335c8eb..5c9bc0d85cc0 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2617,6 +2617,8 @@ out: kfree(buffer); if (is) brelse(is->iloc.bh); + if (bs) + brelse(bs->bh); kfree(is); kfree(bs); From fbb974ba693bbfb4e24a62181ef16d4e45febc37 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 4 Sep 2018 16:51:29 +0200 Subject: [PATCH 278/726] rtc: cmos: Do not export alarm rtc_ops when we do not support alarms When there is no IRQ configured for the RTC, the rtc-cmos code does not support alarms, all alarm rtc_ops fail with -EIO / -EINVAL. The rtc-core expects a rtc driver which does not support rtc alarms to not have alarm ops at all. Otherwise the wakealarm sysfs attr will read as empty rather then returning an error, making it impossible for userspace to find out beforehand if alarms are supported. A system without an IRQ for the RTC before this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm [root@localhost ~]# After this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory [root@localhost ~]# This fixes gnome-session + systemd trying to use suspend-then-hibernate, which causes systemd to abort the suspend when writing the RTC alarm fails. BugLink: https://github.com/systemd/systemd/issues/9988 Signed-off-by: Hans de Goede Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-cmos.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index df0c5776d49b..a5a19ff10535 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -257,6 +257,7 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t) struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char rtc_control; + /* This not only a rtc_op, but also called directly */ if (!is_valid_irq(cmos->irq)) return -EIO; @@ -452,6 +453,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) unsigned char mon, mday, hrs, min, sec, rtc_control; int ret; + /* This not only a rtc_op, but also called directly */ if (!is_valid_irq(cmos->irq)) return -EIO; @@ -516,9 +518,6 @@ static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled) struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned long flags; - if (!is_valid_irq(cmos->irq)) - return -EINVAL; - spin_lock_irqsave(&rtc_lock, flags); if (enabled) @@ -579,6 +578,12 @@ static const struct rtc_class_ops cmos_rtc_ops = { .alarm_irq_enable = cmos_alarm_irq_enable, }; +static const struct rtc_class_ops cmos_rtc_ops_no_alarm = { + .read_time = cmos_read_time, + .set_time = cmos_set_time, + .proc = cmos_procfs, +}; + /*----------------------------------------------------------------*/ /* @@ -855,9 +860,12 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); goto cleanup1; } + + cmos_rtc.rtc->ops = &cmos_rtc_ops; + } else { + cmos_rtc.rtc->ops = &cmos_rtc_ops_no_alarm; } - cmos_rtc.rtc->ops = &cmos_rtc_ops; cmos_rtc.rtc->nvram_old_abi = true; retval = rtc_register_device(cmos_rtc.rtc); if (retval) From 7ce9a992ffde8ce93d5ae5767362a5c7389ae895 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 5 Nov 2018 03:48:25 +0000 Subject: [PATCH 279/726] rtc: hctosys: Add missing range error reporting Fix an issue with the 32-bit range error path in `rtc_hctosys' where no error code is set and consequently the successful preceding call result from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn makes any subsequent call to `hctosys_show' incorrectly report in sysfs that the system time has been set from this RTC while it has not. Set the error to ERANGE then if we can't express the result due to an overflow. Signed-off-by: Maciej W. Rozycki Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t") Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Alexandre Belloni --- drivers/rtc/hctosys.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c index e79f2a181ad2..b9ec4a16db1f 100644 --- a/drivers/rtc/hctosys.c +++ b/drivers/rtc/hctosys.c @@ -50,8 +50,10 @@ static int __init rtc_hctosys(void) tv64.tv_sec = rtc_tm_to_time64(&tm); #if BITS_PER_LONG == 32 - if (tv64.tv_sec > INT_MAX) + if (tv64.tv_sec > INT_MAX) { + err = -ERANGE; goto err_read; + } #endif err = do_settimeofday64(&tv64); From 9bde0afb7a906f1dabdba37162551565740b862d Mon Sep 17 00:00:00 2001 From: Xulin Sun Date: Tue, 6 Nov 2018 16:42:19 +0800 Subject: [PATCH 280/726] rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write pcf2127_i2c_gather_write() allocates memory as local variable for i2c_master_send(), after finishing the master transfer, the allocated memory should be freed. The kmemleak is reported: unreferenced object 0xffff80231e7dba80 (size 64): comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s) hex dump (first 32 bytes): 03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................ 00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P.............. backtrace: [] create_object+0xf8/0x278 [] kmemleak_alloc+0x74/0xa0 [] __kmalloc+0x1ac/0x348 [] pcf2127_i2c_gather_write+0x54/0xf8 [] _regmap_raw_write+0x464/0x850 [] regmap_bulk_write+0x1a4/0x348 [] pcf2127_rtc_set_time+0xac/0xe8 [] rtc_set_time+0x80/0x138 [] rtc_dev_ioctl+0x398/0x610 [] do_vfs_ioctl+0xb0/0x848 [] SyS_ioctl+0x8c/0xa8 [] el0_svc_naked+0x34/0x38 [] 0xffffffffffffffff Signed-off-by: Xulin Sun Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf2127.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c index 9f99a0966550..7cb786d76e3c 100644 --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -303,6 +303,9 @@ static int pcf2127_i2c_gather_write(void *context, memcpy(buf + 1, val, val_size); ret = i2c_master_send(client, buf, val_size + 1); + + kfree(buf); + if (ret != val_size + 1) return ret < 0 ? ret : -EIO; From 53692ec074d00589c2cf1d6d17ca76ad0adce6ec Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 11:14:35 -0500 Subject: [PATCH 281/726] ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.17 --- fs/ext4/xattr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 5c9bc0d85cc0..0b9688683526 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2698,7 +2698,6 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, struct ext4_inode *raw_inode, handle_t *handle) { struct ext4_xattr_ibody_header *header; - struct buffer_head *bh; struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); static unsigned int mnt_count; size_t min_offs; @@ -2739,13 +2738,17 @@ retry: * EA block can hold new_extra_isize bytes. */ if (EXT4_I(inode)->i_file_acl) { + struct buffer_head *bh; + bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl); error = -EIO; if (!bh) goto cleanup; error = ext4_xattr_check_block(inode, bh); - if (error) + if (error) { + brelse(bh); goto cleanup; + } base = BHDR(bh); end = bh->b_data + bh->b_size; min_offs = end - base; From ffe498237b36ee42624e139b21efa05da4ff1f48 Mon Sep 17 00:00:00 2001 From: Chinh T Cao Date: Mon, 5 Nov 2018 12:18:35 -0800 Subject: [PATCH 282/726] ice: Change req_speeds to be u16 Since the req_speeds field in struct ice_link_status is a u8, req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught by a coverity scan. Fix this by changing req_speeds to be u16. Reported-by: Bruce Allan Signed-off-by: Chinh T Cao Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ice/ice_type.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index 12f9432abf11..f4dbc81c1988 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -92,12 +92,12 @@ struct ice_link_status { u64 phy_type_low; u16 max_frame_size; u16 link_speed; + u16 req_speeds; u8 lse_ena; /* Link Status Event notification */ u8 link_info; u8 an_info; u8 ext_info; u8 pacing; - u8 req_speeds; /* Refer to #define from module_type[ICE_MODULE_TYPE_TOTAL_BYTE] of * ice_aqc_get_phy_caps structure */ From ba766b8b99c30ad3c55ed8cf224d1185ecff1476 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 29 Oct 2018 10:52:42 -0700 Subject: [PATCH 283/726] i40e: restore NETIF_F_GSO_IPXIP[46] to netdev features Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index bc71a21c1dc2..3ff5ee49818b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -12249,6 +12249,8 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_PARTIAL | + NETIF_F_GSO_IPXIP4 | + NETIF_F_GSO_IPXIP6 | NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM | NETIF_F_SCTP_CRC | From d5596fd46770550873ab4c02bcb69f83d3d63f63 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 29 Oct 2018 10:52:43 -0700 Subject: [PATCH 284/726] i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver load The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 3ff5ee49818b..21c2688d6308 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -12268,13 +12268,13 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) /* record features VLANs can make use of */ netdev->vlan_features |= hw_enc_features | NETIF_F_TSO_MANGLEID; - if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) - netdev->hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC; - hw_features = hw_enc_features | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; + if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) + hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC; + netdev->hw_features |= hw_features; netdev->features |= hw_features | NETIF_F_HW_VLAN_CTAG_FILTER; From d6fd0ae25c6495674dc5a41a8d16bc8e0073276d Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Wed, 31 Oct 2018 10:06:08 -0700 Subject: [PATCH 285/726] Btrfs: fix missing delayed iputs on unmount There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit") Signed-off-by: Omar Sandoval Reviewed-by: David Sterba [ add trace ] Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 51 ++++++++++++++-------------------------------- 1 file changed, 15 insertions(+), 36 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 00ee5e37e989..3f0b6d1936e8 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1664,9 +1664,8 @@ static int cleaner_kthread(void *arg) struct btrfs_root *root = arg; struct btrfs_fs_info *fs_info = root->fs_info; int again; - struct btrfs_trans_handle *trans; - do { + while (1) { again = 0; /* Make the cleaner go to sleep early. */ @@ -1715,42 +1714,16 @@ static int cleaner_kthread(void *arg) */ btrfs_delete_unused_bgs(fs_info); sleep: + if (kthread_should_park()) + kthread_parkme(); + if (kthread_should_stop()) + return 0; if (!again) { set_current_state(TASK_INTERRUPTIBLE); - if (!kthread_should_stop()) - schedule(); + schedule(); __set_current_state(TASK_RUNNING); } - } while (!kthread_should_stop()); - - /* - * Transaction kthread is stopped before us and wakes us up. - * However we might have started a new transaction and COWed some - * tree blocks when deleting unused block groups for example. So - * make sure we commit the transaction we started to have a clean - * shutdown when evicting the btree inode - if it has dirty pages - * when we do the final iput() on it, eviction will trigger a - * writeback for it which will fail with null pointer dereferences - * since work queues and other resources were already released and - * destroyed by the time the iput/eviction/writeback is made. - */ - trans = btrfs_attach_transaction(root); - if (IS_ERR(trans)) { - if (PTR_ERR(trans) != -ENOENT) - btrfs_err(fs_info, - "cleaner transaction attach returned %ld", - PTR_ERR(trans)); - } else { - int ret; - - ret = btrfs_commit_transaction(trans); - if (ret) - btrfs_err(fs_info, - "cleaner open transaction commit returned %d", - ret); } - - return 0; } static int transaction_kthread(void *arg) @@ -3931,6 +3904,13 @@ void close_ctree(struct btrfs_fs_info *fs_info) int ret; set_bit(BTRFS_FS_CLOSING_START, &fs_info->flags); + /* + * We don't want the cleaner to start new transactions, add more delayed + * iputs, etc. while we're closing. We can't use kthread_stop() yet + * because that frees the task_struct, and the transaction kthread might + * still try to wake up the cleaner. + */ + kthread_park(fs_info->cleaner_kthread); /* wait for the qgroup rescan worker to stop */ btrfs_qgroup_wait_for_completion(fs_info, false); @@ -3958,9 +3938,8 @@ void close_ctree(struct btrfs_fs_info *fs_info) if (!sb_rdonly(fs_info->sb)) { /* - * If the cleaner thread is stopped and there are - * block groups queued for removal, the deletion will be - * skipped when we quit the cleaner thread. + * The cleaner kthread is stopped, so do one final pass over + * unused block groups. */ btrfs_delete_unused_bgs(fs_info); From df376b2ed51a2777c3398e038992f62523c0f932 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 7 Nov 2018 14:58:14 +0100 Subject: [PATCH 286/726] block: respect virtual boundary mask in bvecs With drivers that are settting a virtual boundary constrain, we are seeing a lot of bio splitting and smaller I/Os being submitted to the driver. This happens because the bio gap detection code does not account cases where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will split the bio unnecessarily. Cc: Jan Kara Cc: Bart Van Assche Cc: Ming Lei Reviewed-by: Sagi Grimberg Signed-off-by: Johannes Thumshirn Acked-by: Keith Busch Reviewed-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-merge.c | 2 +- block/blk.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index 6b5ad275ed56..208658a901c6 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -46,7 +46,7 @@ static inline bool bio_will_gap(struct request_queue *q, bio_get_first_bvec(prev_rq->bio, &pb); else bio_get_first_bvec(prev, &pb); - if (pb.bv_offset) + if (pb.bv_offset & queue_virt_boundary(q)) return true; /* diff --git a/block/blk.h b/block/blk.h index a1841b8ff129..c85e53f21cdd 100644 --- a/block/blk.h +++ b/block/blk.h @@ -169,7 +169,7 @@ static inline bool biovec_phys_mergeable(struct request_queue *q, static inline bool __bvec_gap_to_prev(struct request_queue *q, struct bio_vec *bprv, unsigned int offset) { - return offset || + return (offset & queue_virt_boundary(q)) || ((bprv->bv_offset + bprv->bv_len) & queue_virt_boundary(q)); } From 3a40cfe8ba3abba57af2c7e26aad2c6dd1681864 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Wed, 7 Nov 2018 13:42:58 +0800 Subject: [PATCH 287/726] leds: trigger: Fix sleeping function called from invalid context We will meet below issue due to mutex_lock() is called in interrupt context. The mutex lock is used to protect the pattern trigger data, but before changing new pattern trigger data (pattern values or repeat value) by users, we always cancel the timer firstly to clear previous patterns' performance. That means there is no race in pattern_trig_timer_function(), so we can drop the mutex lock in pattern_trig_timer_function() to avoid this issue. Moreover we can move the timer cancelling into mutex protection, since there is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function(). BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x7c/0x9c) [] (dump_stack) from [] (___might_sleep+0xf4/0x158) [] (___might_sleep) from [] (mutex_lock+0x18/0x60) [] (mutex_lock) from [] (pattern_trig_timer_function+0x1c/0x11c) [] (pattern_trig_timer_function) from [] (call_timer_fn+0x1c/0x90) [] (call_timer_fn) from [] (expire_timers+0x94/0xa4) [] (expire_timers) from [] (run_timer_softirq+0x108/0x15c) [] (run_timer_softirq) from [] (__do_softirq+0x1d4/0x258) [] (__do_softirq) from [] (irq_exit+0x64/0xc4) [] (irq_exit) from [] (__handle_domain_irq+0x80/0xb4) [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x90) [] (gic_handle_irq) from [] (__irq_svc+0x58/0x74) Exception stack(0xeb483f60 to 0xeb483fa8) 3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408 3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98 3fa0: 60020013 ffffffff [] (__irq_svc) from [] (arch_cpu_idle+0x1c/0x38) [] (arch_cpu_idle) from [] (do_idle+0x138/0x268) [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [] (cpu_startup_entry) from [<402022ec>] (0x402022ec) Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger") Signed-off-by: Baolin Wang Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Jacek Anaszewski --- drivers/leds/trigger/ledtrig-pattern.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c index 174a298f1be0..1870cf87afe1 100644 --- a/drivers/leds/trigger/ledtrig-pattern.c +++ b/drivers/leds/trigger/ledtrig-pattern.c @@ -75,8 +75,6 @@ static void pattern_trig_timer_function(struct timer_list *t) { struct pattern_trig_data *data = from_timer(data, t, timer); - mutex_lock(&data->lock); - for (;;) { if (!data->is_indefinite && !data->repeat) break; @@ -117,8 +115,6 @@ static void pattern_trig_timer_function(struct timer_list *t) break; } - - mutex_unlock(&data->lock); } static int pattern_trig_start_pattern(struct led_classdev *led_cdev) @@ -177,14 +173,10 @@ static ssize_t repeat_store(struct device *dev, struct device_attribute *attr, if (res < -1 || res == 0) return -EINVAL; - /* - * Clear previous patterns' performence firstly, and remove the timer - * without mutex lock to avoid dead lock. - */ - del_timer_sync(&data->timer); - mutex_lock(&data->lock); + del_timer_sync(&data->timer); + if (data->is_hw_pattern) led_cdev->pattern_clear(led_cdev); @@ -235,14 +227,10 @@ static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev, struct pattern_trig_data *data = led_cdev->trigger_data; int ccount, cr, offset = 0, err = 0; - /* - * Clear previous patterns' performence firstly, and remove the timer - * without mutex lock to avoid dead lock. - */ - del_timer_sync(&data->timer); - mutex_lock(&data->lock); + del_timer_sync(&data->timer); + if (data->is_hw_pattern) led_cdev->pattern_clear(led_cdev); From 406e7f986b2e4499295351bcfff5c93b0d34022a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 7 Nov 2018 14:45:24 +0100 Subject: [PATCH 288/726] Documentation: ABI: led-trigger-pattern: Fix typos - Spelling s/brigntess/brightness/, - Double "use". Signed-off-by: Geert Uytterhoeven Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- Documentation/ABI/testing/sysfs-class-led-trigger-pattern | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern index fb3d1e03b881..1e5d172e0646 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern @@ -37,8 +37,8 @@ Description: 0-| / \/ \/ +---0----1----2----3----4----5----6------------> time (s) - 2. To make the LED go instantly from one brigntess value to another, - we should use use zero-time lengths (the brightness must be same as + 2. To make the LED go instantly from one brightness value to another, + we should use zero-time lengths (the brightness must be same as the previous tuple's). So the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2 duration_2 brightness_2 0 ...". For example: From cf3d02a185edf449d30465dae8d22a4979545829 Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Wed, 7 Nov 2018 15:55:33 -0500 Subject: [PATCH 289/726] drm: Fix htmldocs warnings in drm_fourcc.c Add a description for dev and remove the excess one for native. Fixes the following warnings: ../drivers/gpu/drm/drm_fourcc.c:112: warning: Function parameter or member 'dev' not described in 'drm_driver_legacy_fb_format' ../drivers/gpu/drm/drm_fourcc.c:112: warning: Excess function parameter 'native' description in 'drm_driver_legacy_fb_format' Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann Cc: Daniel Vetter Reviewed-by: Daniel Vetter Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181107205546.216088-1-sean@poorly.run --- drivers/gpu/drm/drm_fourcc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fourcc.c b/drivers/gpu/drm/drm_fourcc.c index 90a1c846fc25..8aaa5e86a979 100644 --- a/drivers/gpu/drm/drm_fourcc.c +++ b/drivers/gpu/drm/drm_fourcc.c @@ -97,9 +97,9 @@ EXPORT_SYMBOL(drm_mode_legacy_fb_format); /** * drm_driver_legacy_fb_format - compute drm fourcc code from legacy description + * @dev: DRM device * @bpp: bits per pixels * @depth: bit depth per pixel - * @native: use host native byte order * * Computes a drm fourcc pixel format code for the given @bpp/@depth values. * Unlike drm_mode_legacy_fb_format() this looks at the drivers mode_config, From 6961cd4d0fde97f1cdb798ba21cf124ecfa0bf95 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 7 Nov 2018 14:34:05 -0700 Subject: [PATCH 290/726] ubd: fix missing lock around request issue We need to hold the device lock (and disable interrupts) while writing new commands, or we could be interrupted while that is happening and read invalid requests in the completion path. Fixes: 4e6da0fe8058 ("um: Convert ubd driver to blk-mq") Tested-by: Richard Weinberger Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 74c002ddc0ce..08831f5d83db 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1341,11 +1341,14 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req, static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd) { + struct ubd *ubd_dev = hctx->queue->queuedata; struct request *req = bd->rq; int ret = 0; blk_mq_start_request(req); + spin_lock_irq(&ubd_dev->lock); + if (req_op(req) == REQ_OP_FLUSH) { ret = ubd_queue_one_vec(hctx, req, 0, NULL); } else { @@ -1361,9 +1364,11 @@ static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx, } } out: - if (ret < 0) { + spin_unlock_irq(&ubd_dev->lock); + + if (ret < 0) blk_mq_requeue_request(req, true); - } + return BLK_STS_OK; } From e31d36b0a453d581fb077fce6883811c5e14874d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 7 Nov 2018 10:47:57 +0100 Subject: [PATCH 291/726] MAINTAINERS: Fix remaining pointers to obsolete libata.git libata.git no longer exists. Replace the remaining pointers to it by pointers to the block tree, which is where all libata development happens now. Signed-off-by: Geert Uytterhoeven Signed-off-by: Jens Axboe --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2b928aa857ce..262ece39cc47 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8343,7 +8343,7 @@ F: drivers/media/dvb-frontends/lgdt3305.* LIBATA PATA ARASAN COMPACT FLASH CONTROLLER M: Viresh Kumar L: linux-ide@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git S: Maintained F: include/linux/pata_arasan_cf_data.h F: drivers/ata/pata_arasan_cf.c @@ -8360,7 +8360,7 @@ F: drivers/ata/ata_generic.c LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS M: Linus Walleij L: linux-ide@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git S: Maintained F: drivers/ata/pata_ftide010.c F: drivers/ata/sata_gemini.c @@ -8379,7 +8379,7 @@ F: include/linux/ahci_platform.h LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER M: Mikael Pettersson L: linux-ide@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git S: Maintained F: drivers/ata/sata_promise.* From f3587d76da05f68098ddb1cb3c98cc6a9e8a402c Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 7 Nov 2018 07:37:45 -0700 Subject: [PATCH 292/726] block: Clear kernel memory before copying to user If the kernel allocates a bounce buffer for user read data, this memory needs to be cleared before copying it to the user, otherwise it may leak kernel memory to user space. Laurence Oberman Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- block/bio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/bio.c b/block/bio.c index 4a5a036268fb..9a9c59067521 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1260,6 +1260,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, if (ret) goto cleanup; } else { + zero_fill_bio(bio); iov_iter_advance(iter, bio->bi_iter.bi_size); } From 3c7eda0b65ad279dd2f26908d2f4bd088da93996 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Wed, 24 Oct 2018 12:11:35 +0800 Subject: [PATCH 293/726] drm/amd/powerplay: set a default fclk/gfxclk ratio Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 16 ++++++++++++++++ .../gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h | 1 + drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h | 3 ++- 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 57143d51e3ee..8bf76108cf39 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -120,6 +120,7 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr) data->registry_data.disable_auto_wattman = 1; data->registry_data.auto_wattman_debug = 0; data->registry_data.auto_wattman_sample_period = 100; + data->registry_data.fclk_gfxclk_ratio = 0x3F6CCCCD; data->registry_data.auto_wattman_threshold = 50; data->registry_data.gfxoff_controlled_by_driver = 1; data->gfxoff_allowed = false; @@ -829,6 +830,16 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr) return 0; } +static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr) +{ + struct vega20_hwmgr *data = + (struct vega20_hwmgr *)(hwmgr->backend); + + return smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetFclkGfxClkRatio, + data->registry_data.fclk_gfxclk_ratio); +} + static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr) { struct vega20_hwmgr *data = @@ -1532,6 +1543,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr) "[EnableDPMTasks] Failed to enable all smu features!", return result); + result = vega20_send_clock_ratio(hwmgr); + PP_ASSERT_WITH_CODE(!result, + "[EnableDPMTasks] Failed to send clock ratio!", + return result); + /* Initialize UVD/VCE powergating state */ vega20_init_powergate_state(hwmgr); diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h index 56fe6a0d42e8..25faaa5c5b10 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h @@ -328,6 +328,7 @@ struct vega20_registry_data { uint8_t disable_auto_wattman; uint32_t auto_wattman_debug; uint32_t auto_wattman_sample_period; + uint32_t fclk_gfxclk_ratio; uint8_t auto_wattman_threshold; uint8_t log_avfs_param; uint8_t enable_enginess; diff --git a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h index 45d64a81e945..4f63a736ea0e 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h +++ b/drivers/gpu/drm/amd/powerplay/inc/vega20_ppsmc.h @@ -105,7 +105,8 @@ #define PPSMC_MSG_SetSystemVirtualDramAddrHigh 0x4B #define PPSMC_MSG_SetSystemVirtualDramAddrLow 0x4C #define PPSMC_MSG_WaflTest 0x4D -// Unused ID 0x4E to 0x50 +#define PPSMC_MSG_SetFclkGfxClkRatio 0x4E +// Unused ID 0x4F to 0x50 #define PPSMC_MSG_AllowGfxOff 0x51 #define PPSMC_MSG_DisallowGfxOff 0x52 #define PPSMC_MSG_GetPptLimit 0x53 From 108110a3ffa3483d743f3bff93917ba64dc8edd0 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Wed, 7 Nov 2018 09:16:07 +0800 Subject: [PATCH 294/726] drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher --- .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 37 +++++++++---------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 8bf76108cf39..99861f32b1f9 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -830,6 +830,18 @@ static int vega20_enable_all_smu_features(struct pp_hwmgr *hwmgr) return 0; } +static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr) +{ + struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend); + + if (data->smu_features[GNLD_DPM_UCLK].enabled) + return smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetUclkFastSwitch, + 1); + + return 0; +} + static int vega20_send_clock_ratio(struct pp_hwmgr *hwmgr) { struct vega20_hwmgr *data = @@ -1543,6 +1555,11 @@ static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr) "[EnableDPMTasks] Failed to enable all smu features!", return result); + result = vega20_notify_smc_display_change(hwmgr); + PP_ASSERT_WITH_CODE(!result, + "[EnableDPMTasks] Failed to notify smc display change!", + return result); + result = vega20_send_clock_ratio(hwmgr); PP_ASSERT_WITH_CODE(!result, "[EnableDPMTasks] Failed to send clock ratio!", @@ -1988,19 +2005,6 @@ static int vega20_read_sensor(struct pp_hwmgr *hwmgr, int idx, return ret; } -static int vega20_notify_smc_display_change(struct pp_hwmgr *hwmgr, - bool has_disp) -{ - struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend); - - if (data->smu_features[GNLD_DPM_UCLK].enabled) - return smum_send_msg_to_smc_with_parameter(hwmgr, - PPSMC_MSG_SetUclkFastSwitch, - has_disp ? 1 : 0); - - return 0; -} - int vega20_display_clock_voltage_request(struct pp_hwmgr *hwmgr, struct pp_display_clock_request *clock_req) { @@ -2060,13 +2064,6 @@ static int vega20_notify_smc_display_config_after_ps_adjustment( struct pp_display_clock_request clock_req; int ret = 0; - if ((hwmgr->display_config->num_display > 1) && - !hwmgr->display_config->multi_monitor_in_sync && - !hwmgr->display_config->nb_pstate_switch_disable) - vega20_notify_smc_display_change(hwmgr, false); - else - vega20_notify_smc_display_change(hwmgr, true); - min_clocks.dcefClock = hwmgr->display_config->min_dcef_set_clk; min_clocks.dcefClockInSR = hwmgr->display_config->min_dcef_deep_sleep_set_clk; min_clocks.memoryClock = hwmgr->display_config->min_mem_set_clock; From 8be17ac95f8451b51f636622d8d4b8674334f468 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Tue, 30 Oct 2018 14:28:49 -0400 Subject: [PATCH 295/726] drm/amd/display: Cleanup MST non-atomic code workaround [why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Harry Wentland Reviewed-by: Lyude Paul Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++----- .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 34 ------------------- .../display/amdgpu_dm/amdgpu_dm_mst_types.h | 1 - 3 files changed, 4 insertions(+), 46 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d3f5cb1795bf..c1262f62cd9f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2703,18 +2703,11 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, drm_connector = &aconnector->base; if (!aconnector->dc_sink) { - /* - * Create dc_sink when necessary to MST - * Don't apply fake_sink to MST - */ - if (aconnector->mst_port) { - dm_dp_mst_dc_sink_create(drm_connector); - return stream; + if (!aconnector->mst_port) { + sink = create_fake_sink(aconnector); + if (!sink) + return stream; } - - sink = create_fake_sink(aconnector); - if (!sink) - return stream; } else { sink = aconnector->dc_sink; } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 03601d717fed..03e98967d6c2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -205,40 +205,6 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = { .atomic_get_property = amdgpu_dm_connector_atomic_get_property }; -void dm_dp_mst_dc_sink_create(struct drm_connector *connector) -{ - struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); - struct dc_sink *dc_sink; - struct dc_sink_init_data init_params = { - .link = aconnector->dc_link, - .sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST }; - - /* FIXME none of this is safe. we shouldn't touch aconnector here in - * atomic_check - */ - - /* - * TODO: Need to further figure out why ddc.algo is NULL while MST port exists - */ - if (!aconnector->port || !aconnector->port->aux.ddc.algo) - return; - - ASSERT(aconnector->edid); - - dc_sink = dc_link_add_remote_sink( - aconnector->dc_link, - (uint8_t *)aconnector->edid, - (aconnector->edid->extensions + 1) * EDID_LENGTH, - &init_params); - - dc_sink->priv = aconnector; - aconnector->dc_sink = dc_sink; - - if (aconnector->dc_sink) - amdgpu_dm_update_freesync_caps( - connector, aconnector->edid); -} - static int dm_dp_mst_get_modes(struct drm_connector *connector) { struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h index 8cf51da26657..2da851b40042 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h @@ -31,6 +31,5 @@ struct amdgpu_dm_connector; void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, struct amdgpu_dm_connector *aconnector); -void dm_dp_mst_dc_sink_create(struct drm_connector *connector); #endif From 0e6613e46fed29316f33acf86e1d1568288638b5 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Tue, 30 Oct 2018 14:37:16 -0400 Subject: [PATCH 296/726] drm/amd/display: Drop reusing drm connector for MST [why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Harry Wentland Reviewed-by: Lyude Paul Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 2 - .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 40 ++++--------------- 2 files changed, 7 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 978b34a5011c..924a38a1fc44 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -160,8 +160,6 @@ struct amdgpu_dm_connector { struct mutex hpd_lock; bool fake_enable; - - bool mst_connected; }; #define to_amdgpu_dm_connector(x) container_of(x, struct amdgpu_dm_connector, base) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 03e98967d6c2..31126eb23a74 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -320,25 +320,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct amdgpu_device *adev = dev->dev_private; struct amdgpu_dm_connector *aconnector; struct drm_connector *connector; - struct drm_connector_list_iter conn_iter; - - drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { - aconnector = to_amdgpu_dm_connector(connector); - if (aconnector->mst_port == master - && !aconnector->port) { - DRM_INFO("DM_MST: reusing connector: %p [id: %d] [master: %p]\n", - aconnector, connector->base.id, aconnector->mst_port); - - aconnector->port = port; - drm_connector_set_path_property(connector, pathprop); - - drm_connector_list_iter_end(&conn_iter); - aconnector->mst_connected = true; - return &aconnector->base; - } - } - drm_connector_list_iter_end(&conn_iter); aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL); if (!aconnector) @@ -387,8 +368,6 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, */ amdgpu_dm_connector_funcs_reset(connector); - aconnector->mst_connected = true; - DRM_INFO("DM_MST: added connector: %p [id: %d] [master: %p]\n", aconnector, connector->base.id, aconnector->mst_port); @@ -400,6 +379,9 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr, struct drm_connector *connector) { + struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr); + struct drm_device *dev = master->base.dev; + struct amdgpu_device *adev = dev->dev_private; struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); DRM_INFO("DM_MST: Disabling connector: %p [id: %d] [master: %p]\n", @@ -413,7 +395,10 @@ static void dm_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr, aconnector->dc_sink = NULL; } - aconnector->mst_connected = false; + drm_connector_unregister(connector); + if (adev->mode_info.rfbdev) + drm_fb_helper_remove_one_connector(&adev->mode_info.rfbdev->helper, connector); + drm_connector_put(connector); } static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) @@ -424,18 +409,10 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr) drm_kms_helper_hotplug_event(dev); } -static void dm_dp_mst_link_status_reset(struct drm_connector *connector) -{ - mutex_lock(&connector->dev->mode_config.mutex); - drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD); - mutex_unlock(&connector->dev->mode_config.mutex); -} - static void dm_dp_mst_register_connector(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct amdgpu_device *adev = dev->dev_private; - struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); if (adev->mode_info.rfbdev) drm_fb_helper_add_one_connector(&adev->mode_info.rfbdev->helper, connector); @@ -443,9 +420,6 @@ static void dm_dp_mst_register_connector(struct drm_connector *connector) DRM_ERROR("adev->mode_info.rfbdev is NULL\n"); drm_connector_register(connector); - - if (aconnector->mst_connected) - dm_dp_mst_link_status_reset(connector); } static const struct drm_dp_mst_topology_cbs dm_mst_cbs = { From 63237f8748bdf46dccf79ef8f98f05e9fe799162 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 1 Nov 2018 21:51:49 -0400 Subject: [PATCH 297/726] drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() [why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 31126eb23a74..d02c32a1039c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -285,12 +285,7 @@ dm_dp_create_fake_mst_encoder(struct amdgpu_dm_connector *connector) struct amdgpu_device *adev = dev->dev_private; struct amdgpu_encoder *amdgpu_encoder; struct drm_encoder *encoder; - const struct drm_connector_helper_funcs *connector_funcs = - connector->base.helper_private; - struct drm_encoder *enc_master = - connector_funcs->best_encoder(&connector->base); - DRM_DEBUG_KMS("enc master is %p\n", enc_master); amdgpu_encoder = kzalloc(sizeof(*amdgpu_encoder), GFP_KERNEL); if (!amdgpu_encoder) return NULL; From de59fae0043f07de5d25e02ca360f7d57bfa5866 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Wed, 7 Nov 2018 22:36:23 -0500 Subject: [PATCH 298/726] ext4: fix buffer leak in __ext4_read_dirblock() on error path Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 3.9 --- fs/ext4/namei.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index d388cce72db2..6a6b90363ef1 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -126,6 +126,7 @@ static struct buffer_head *__ext4_read_dirblock(struct inode *inode, if (!is_dx_block && type == INDEX) { ext4_error_inode(inode, func, line, block, "directory leaf block found instead of index block"); + brelse(bh); return ERR_PTR(-EFSCORRUPTED); } if (!ext4_has_metadata_csum(inode->i_sb) || From d2f007dbe7e4c9583eea6eb04d60001e85c6f1bd Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Mon, 5 Nov 2018 20:55:09 +0100 Subject: [PATCH 299/726] userns: also map extents in the reverse map to kernel IDs The current logic first clones the extent array and sorts both copies, then maps the lower IDs of the forward mapping into the lower namespace, but doesn't map the lower IDs of the reverse mapping. This means that code in a nested user namespace with >5 extents will see incorrect IDs. It also breaks some access checks, like inode_owner_or_capable() and privileged_wrt_inode_uidgid(), so a process can incorrectly appear to be capable relative to an inode. To fix it, we have to make sure that the "lower_first" members of extents in both arrays are translated; and we have to make sure that the reverse map is sorted *after* the translation (since otherwise the translation can break the sorting). This is CVE-2018-18955. Fixes: 6397fac4915a ("userns: bump idmap limits to 340") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Tested-by: Eric W. Biederman Reviewed-by: Eric W. Biederman Signed-off-by: Eric W. Biederman --- kernel/user_namespace.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index e5222b5fb4fe..923414a246e9 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -974,10 +974,6 @@ static ssize_t map_write(struct file *file, const char __user *buf, if (!new_idmap_permitted(file, ns, cap_setid, &new_map)) goto out; - ret = sort_idmaps(&new_map); - if (ret < 0) - goto out; - ret = -EPERM; /* Map the lower ids from the parent user namespace to the * kernel global id space. @@ -1004,6 +1000,14 @@ static ssize_t map_write(struct file *file, const char __user *buf, e->lower_first = lower_first; } + /* + * If we want to use binary search for lookup, this clones the extent + * array and sorts both copies. + */ + ret = sort_idmaps(&new_map); + if (ret < 0) + goto out; + /* Install the map */ if (new_map.nr_extents <= UID_GID_MAP_MAX_BASE_EXTENTS) { memcpy(map->extent, new_map.extent, From 96ed82cc1f515a2329f93506129ab1de35429b89 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:06:52 +0000 Subject: [PATCH 300/726] FDDI: defza: Fix SPDX annotation The SPDX annotation for this driver does not match the license text, which specifies GNU GPL 2 or later. Make the two match by correcting the SPDX tag. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 2 +- drivers/net/fddi/defza.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index 3b7f10a5f06a..79980eeb0e43 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices. * * Copyright (c) 2018 Maciej W. Rozycki diff --git a/drivers/net/fddi/defza.h b/drivers/net/fddi/defza.h index b06acf32738e..ed659ed17215 100644 --- a/drivers/net/fddi/defza.h +++ b/drivers/net/fddi/defza.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0+ */ /* FDDI network adapter driver for DEC FDDIcontroller 700/700-C devices. * * Copyright (c) 2018 Maciej W. Rozycki From 5f5fae37dbcf37feae48c40d2580dbd67c5df131 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:06:59 +0000 Subject: [PATCH 301/726] FDDI: defza: Add missing comment closing Fix: drivers/net/fddi/defza.h:238:1: warning: "/*" within comment [-Wcomment] by adding a missing comment closing. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/fddi/defza.h b/drivers/net/fddi/defza.h index ed659ed17215..93bda61be8e3 100644 --- a/drivers/net/fddi/defza.h +++ b/drivers/net/fddi/defza.h @@ -235,6 +235,7 @@ struct fza_ring_cmd { #define FZA_RING_CMD 0x200400 /* command ring address */ #define FZA_RING_CMD_SIZE 0x40 /* command descriptor ring * size + */ /* Command constants. */ #define FZA_RING_CMD_MASK 0x7fffffff #define FZA_RING_CMD_NOP 0x00000000 /* nop */ From 04453b6b241913f85af013eec187bab776428af5 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:07:05 +0000 Subject: [PATCH 302/726] FDDI: defza: Move SMT Tx data buffer declaration next to its skb Move the temporary data buffer used when tapping into the SMT Tx queue from the outer function level into the conditional block it's actually used in and its containing skb is also declared, making the structure of code better. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index 79980eeb0e43..bebd0d6d2320 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -784,7 +784,7 @@ err_rx: static void fza_tx_smt(struct net_device *dev) { struct fza_private *fp = netdev_priv(dev); - struct fza_buffer_tx __iomem *smt_tx_ptr, *skb_data_ptr; + struct fza_buffer_tx __iomem *smt_tx_ptr; int i, len; u32 own; @@ -799,6 +799,7 @@ static void fza_tx_smt(struct net_device *dev) if (!netif_queue_stopped(dev)) { if (dev_nit_active(dev)) { + struct fza_buffer_tx *skb_data_ptr; struct sk_buff *skb; /* Length must be a multiple of 4 as only word From 8f5365ebf7b17c35dddbb694b4f0ffd1293a947f Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 7 Nov 2018 12:07:10 +0000 Subject: [PATCH 303/726] FDDI: defza: Make the driver version string constant The driver version string is obviously not meant to be changed at run time, so mark it `const'. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defza.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fddi/defza.c b/drivers/net/fddi/defza.c index bebd0d6d2320..c5cae8e74dc4 100644 --- a/drivers/net/fddi/defza.c +++ b/drivers/net/fddi/defza.c @@ -56,7 +56,7 @@ #define DRV_VERSION "v.1.1.4" #define DRV_RELDATE "Oct 6 2018" -static char version[] = +static const char version[] = DRV_NAME ": " DRV_VERSION " " DRV_RELDATE " Maciej W. Rozycki\n"; MODULE_AUTHOR("Maciej W. Rozycki "); From 25d202ed820ee347edec0bf3bf553544556bf64b Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 22 Oct 2018 10:21:38 -0500 Subject: [PATCH 304/726] mount: Retest MNT_LOCKED in do_umount It was recently pointed out that the one instance of testing MNT_LOCKED outside of the namespace_sem is in ksys_umount. Fix that by adding a test inside of do_umount with namespace_sem and the mount_lock held. As it helps to fail fails the existing test is maintained with an additional comment pointing out that it may be racy because the locks are not held. Cc: stable@vger.kernel.org Reported-by: Al Viro Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: "Eric W. Biederman" --- fs/namespace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 98d27da43304..72f10c40fe3f 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1540,8 +1540,13 @@ static int do_umount(struct mount *mnt, int flags) namespace_lock(); lock_mount_hash(); - event++; + /* Recheck MNT_LOCKED with the locks held */ + retval = -EINVAL; + if (mnt->mnt.mnt_flags & MNT_LOCKED) + goto out; + + event++; if (flags & MNT_DETACH) { if (!list_empty(&mnt->mnt_list)) umount_tree(mnt, UMOUNT_PROPAGATE); @@ -1555,6 +1560,7 @@ static int do_umount(struct mount *mnt, int flags) retval = 0; } } +out: unlock_mount_hash(); namespace_unlock(); return retval; @@ -1645,7 +1651,7 @@ int ksys_umount(char __user *name, int flags) goto dput_and_out; if (!check_mnt(mnt)) goto dput_and_out; - if (mnt->mnt.mnt_flags & MNT_LOCKED) + if (mnt->mnt.mnt_flags & MNT_LOCKED) /* Check optimistically */ goto dput_and_out; retval = -EPERM; if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN)) From df7342b240185d58d3d9665c0bbf0a0f5570ec29 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 25 Oct 2018 09:04:18 -0500 Subject: [PATCH 305/726] mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels Signed-off-by: "Eric W. Biederman" --- fs/namespace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 72f10c40fe3f..e0e0f9cf6c30 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1734,8 +1734,14 @@ struct mount *copy_tree(struct mount *mnt, struct dentry *dentry, for (s = r; s; s = next_mnt(s, r)) { if (!(flag & CL_COPY_UNBINDABLE) && IS_MNT_UNBINDABLE(s)) { - s = skip_mnt_tree(s); - continue; + if (s->mnt.mnt_flags & MNT_LOCKED) { + /* Both unbindable and locked. */ + q = ERR_PTR(-EPERM); + goto out; + } else { + s = skip_mnt_tree(s); + continue; + } } if (!(flag & CL_COPY_MNT_NS_FILE) && is_mnt_ns_file(s->mnt.mnt_root)) { From e84b47941e15e6666afb8ee8b21d1c3fc1a013af Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 7 Nov 2018 17:50:52 +0100 Subject: [PATCH 306/726] ibmvnic: fix accelerated VLAN handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 7893beffcc71..c9d5d0a7fbf1 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1545,7 +1545,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) tx_crq.v1.sge_len = cpu_to_be32(skb->len); tx_crq.v1.ioba = cpu_to_be64(data_dma_addr); - if (adapter->vlan_header_insertion) { + if (adapter->vlan_header_insertion && skb_vlan_tag_present(skb)) { tx_crq.v1.flags2 |= IBMVNIC_TX_VLAN_INSERT; tx_crq.v1.vlan_id = cpu_to_be16(skb->vlan_tci); } From b25ddb00bc1b96613edcb525f19203a7d1405fce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 7 Nov 2018 17:50:53 +0100 Subject: [PATCH 307/726] qlcnic: remove assumption that vlan_tci != 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 9647578cbe6a..14f26bf3b388 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -459,7 +459,7 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter, struct cmd_desc_type0 *first_desc, struct sk_buff *skb, struct qlcnic_host_tx_ring *tx_ring) { - u8 l4proto, opcode = 0, hdr_len = 0; + u8 l4proto, opcode = 0, hdr_len = 0, tag_vlan = 0; u16 flags = 0, vlan_tci = 0; int copied, offset, copy_len, size; struct cmd_desc_type0 *hwdesc; @@ -472,14 +472,16 @@ static int qlcnic_tx_pkt(struct qlcnic_adapter *adapter, flags = QLCNIC_FLAGS_VLAN_TAGGED; vlan_tci = ntohs(vh->h_vlan_TCI); protocol = ntohs(vh->h_vlan_encapsulated_proto); + tag_vlan = 1; } else if (skb_vlan_tag_present(skb)) { flags = QLCNIC_FLAGS_VLAN_OOB; vlan_tci = skb_vlan_tag_get(skb); + tag_vlan = 1; } if (unlikely(adapter->tx_pvid)) { - if (vlan_tci && !(adapter->flags & QLCNIC_TAGGING_ENABLED)) + if (tag_vlan && !(adapter->flags & QLCNIC_TAGGING_ENABLED)) return -EIO; - if (vlan_tci && (adapter->flags & QLCNIC_TAGGING_ENABLED)) + if (tag_vlan && (adapter->flags & QLCNIC_TAGGING_ENABLED)) goto set_flags; flags = QLCNIC_FLAGS_VLAN_OOB; From e6a2d72c10405b30ddba5af2e44a9d3d925a56d3 Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Wed, 7 Nov 2018 12:10:32 +0100 Subject: [PATCH 308/726] posix-cpu-timers: Remove useless call to check_dl_overrun() check_dl_overrun() is used to send a SIGXCPU to users that asked to be informed when a SCHED_DEADLINE runtime overruns occur. The function is called by check_thread_timers() already, so the call in check_process_timers() is redundant/wrong (even though harmless). Remove it. Fixes: 34be39305a77 ("sched/deadline: Implement "runtime overrun signal" support") Signed-off-by: Juri Lelli Signed-off-by: Thomas Gleixner Reviewed-by: Daniel Bristot de Oliveira Reviewed-by: Steven Rostedt (VMware) Cc: linux-rt-users@vger.kernel.org Cc: mtk.manpages@gmail.com Cc: Mathieu Poirier Cc: Peter Zijlstra Cc: Luca Abeni Cc: Claudio Scordino Link: https://lkml.kernel.org/r/20181107111032.32291-1-juri.lelli@redhat.com --- kernel/time/posix-cpu-timers.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index ce32cf741b25..8f0644af40be 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -917,9 +917,6 @@ static void check_process_timers(struct task_struct *tsk, struct task_cputime cputime; unsigned long soft; - if (dl_task(tsk)) - check_dl_overrun(tsk); - /* * If cputimer is not running, then there are no active * process wide timers (POSIX 1.b, itimers, RLIMIT_CPU). From 0bb2ae1b26e1fb7543ec7474cdd374ac4b88c4da Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 29 Oct 2018 08:11:33 +0000 Subject: [PATCH 309/726] s390/perf: Change CPUM_CF return code in event init function The function perf_init_event() creates a new event and assignes it to a PMU. This a done in a loop over all existing PMUs. For each listed PMU the event init function is called and if this function does return any other error than -ENOENT, the loop is terminated the creation of the event fails. If the event is invalid, return -ENOENT to try other PMUs. Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/perf_cpum_cf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index cc085e2d2ce9..74091fd3101e 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -373,7 +373,7 @@ static int __hw_perf_event_init(struct perf_event *event) return -ENOENT; if (ev > PERF_CPUM_CF_MAX_CTR) - return -EINVAL; + return -ENOENT; /* Obtain the counter set to which the specified counter belongs */ set = get_counter_set(ev); From 9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 25 Oct 2018 12:05:11 -0500 Subject: [PATCH 310/726] mount: Prevent MNT_DETACH from disconnecting locked mounts Timothy Baldwin wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4 /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Timothy Baldwin Tested-by: Timothy Baldwin Signed-off-by: "Eric W. Biederman" --- fs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namespace.c b/fs/namespace.c index e0e0f9cf6c30..74f64294a410 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1794,7 +1794,7 @@ void drop_collected_mounts(struct vfsmount *mnt) { namespace_lock(); lock_mount_hash(); - umount_tree(real_mount(mnt), UMOUNT_SYNC); + umount_tree(real_mount(mnt), 0); unlock_mount_hash(); namespace_unlock(); } From e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 7 Nov 2018 14:18:50 +0100 Subject: [PATCH 311/726] iommu/ipmmu-vmsa: Fix crash on early domain free If iommu_ops.add_device() fails, iommu_ops.domain_free() is still called, leading to a crash, as the domain was only partially initialized: ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables sata_rcar ee300000.sata: Unable to initialize IPMMU context iommu: Failed to add device ee300000.sata to group 0: -22 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... Call trace: ipmmu_domain_free+0x1c/0xa0 iommu_group_release+0x48/0x68 kobject_put+0x74/0xe8 kobject_del.part.0+0x3c/0x50 kobject_put+0x60/0xe8 iommu_group_get_for_dev+0xa8/0x1f0 ipmmu_add_device+0x1c/0x40 of_iommu_configure+0x118/0x190 Fix this by checking if the domain's context already exists, before trying to destroy it. Signed-off-by: Geert Uytterhoeven Reviewed-by: Robin Murphy Fixes: d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU') Signed-off-by: Joerg Roedel --- drivers/iommu/ipmmu-vmsa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c index b98a03189580..ddf3a492e1d5 100644 --- a/drivers/iommu/ipmmu-vmsa.c +++ b/drivers/iommu/ipmmu-vmsa.c @@ -498,6 +498,9 @@ static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain) static void ipmmu_domain_destroy_context(struct ipmmu_vmsa_domain *domain) { + if (!domain->mmu) + return; + /* * Disable the context. Flush the TLB as required when modifying the * context registers. From 24efee412c75843755da0ddd7bbc2db2ce9129f5 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Tue, 6 Nov 2018 22:52:11 +0100 Subject: [PATCH 312/726] Compiler Attributes: improve explanation of header Explain better what "optional" attributes are, and avoid calling them so to avoid confusion. Simply retain "Optional" as a word to look for in the comments. Moreover, add a couple sentences to explain a bit more the intention and the documentation links. Signed-off-by: Miguel Ojeda --- include/linux/compiler_attributes.h | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h index 6b28c1b7310c..f8c400ba1929 100644 --- a/include/linux/compiler_attributes.h +++ b/include/linux/compiler_attributes.h @@ -4,22 +4,26 @@ /* * The attributes in this file are unconditionally defined and they directly - * map to compiler attribute(s) -- except those that are optional. + * map to compiler attribute(s), unless one of the compilers does not support + * the attribute. In that case, __has_attribute is used to check for support + * and the reason is stated in its comment ("Optional: ..."). * * Any other "attributes" (i.e. those that depend on a configuration option, * on a compiler, on an architecture, on plugins, on other attributes...) * should be defined elsewhere (e.g. compiler_types.h or compiler-*.h). + * The intention is to keep this file as simple as possible, as well as + * compiler- and version-agnostic (e.g. avoiding GCC_VERSION checks). * * This file is meant to be sorted (by actual attribute name, * not by #define identifier). Use the __attribute__((__name__)) syntax * (i.e. with underscores) to avoid future collisions with other macros. - * If an attribute is optional, state the reason in the comment. + * Provide links to the documentation of each supported compiler, if it exists. */ /* - * To check for optional attributes, we use __has_attribute, which is supported - * on gcc >= 5, clang >= 2.9 and icc >= 17. In the meantime, to support - * 4.6 <= gcc < 5, we implement __has_attribute by hand. + * __has_attribute is supported on gcc >= 5, clang >= 2.9 and icc >= 17. + * In the meantime, to support 4.6 <= gcc < 5, we implement __has_attribute + * by hand. * * sparse does not support __has_attribute (yet) and defines __GNUC_MINOR__ * depending on the compiler used to build it; however, these attributes have From e82e62e390d39c3819641cd721695702180d54fb Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Wed, 7 Nov 2018 13:36:40 +0100 Subject: [PATCH 313/726] HID: Add quirk for Microsoft PIXART OEM mouse The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. References: https://www.spinics.net/lists/linux-usb/msg88965.html http://linet.gr.jp/~kojima/PlamoWeb/ML/htdocs/201808/msg00019.html Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c0d668944dbe..02ce75f5ea4e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -805,6 +805,7 @@ #define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9 #define USB_DEVICE_ID_MS_POWER_COVER 0x07da #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd +#define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb #define USB_VENDOR_ID_MOJO 0x8282 #define USB_DEVICE_ID_RETRO_ADAPTER 0x3201 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 8237dd86fb17..d82e5ab48837 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -107,6 +107,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE_PRO_2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2), HID_QUIRK_NO_INIT_REPORTS }, From 943210ba807ec50aafa2fa7b13bd6d36a478969b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 23 Oct 2018 11:28:28 -0400 Subject: [PATCH 314/726] vt: fix broken display when running aptitude If you run aptitude on framebuffer console, the display is corrupted. The corruption is caused by the commit d8ae7242. The patch adds "offset" to "start" when calling scr_memsetw, but it forgets to do the same addition on a subsequent call to do_update_region. Signed-off-by: Mikulas Patocka Fixes: d8ae72427187 ("vt: preserve unicode values corresponding to screen characters") Reviewed-by: Nicolas Pitre Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5f1183b0b89d..476ec4b1b86c 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1551,7 +1551,7 @@ static void csi_K(struct vc_data *vc, int vpar) scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count); vc->vc_need_wrap = 0; if (con_should_update(vc)) - do_update_region(vc, (unsigned long) start, count); + do_update_region(vc, (unsigned long)(start + offset), count); } static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */ From 991a25194097006ec1e0d2e0814ff920e59e3465 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 22 Oct 2018 09:19:04 -0700 Subject: [PATCH 315/726] termios, tty/tty_baudrate.c: fix buffer overrun On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) Requested-by: Cc: Johan Hovold Cc: Jiri Slaby Cc: Al Viro Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Eugene Syromiatnikov Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_baudrate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 7576ceace571..f438eaa68246 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -77,7 +77,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios) else cbaud += 15; } - return baud_table[cbaud]; + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; } EXPORT_SYMBOL(tty_termios_baud_rate); @@ -113,7 +113,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) else cbaud += 15; } - return baud_table[cbaud]; + return cbaud >= n_baud_table ? 0 : baud_table[cbaud]; #else /* IBSHIFT */ return tty_termios_baud_rate(termios); #endif /* IBSHIFT */ From d0ffb805b729322626639336986bc83fc2e60871 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin (Intel)" Date: Mon, 22 Oct 2018 09:19:05 -0700 Subject: [PATCH 316/726] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags using arbitrary flags. Because BOTHER is not defined, the general Linux code doesn't allow setting arbitrary baud rates, and because CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037. Resolve both problems by #defining BOTHER to 037 on Alpha. However, userspace still needs to know if setting BOTHER is actually safe given legacy kernels (does anyone actually care about that on Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even though they use the same structure. Define struct termios2 just for compatibility; it is the exact same structure as struct termios. In a future patchset, this will be cleaned up so the uapi headers are usable from libc. Signed-off-by: H. Peter Anvin (Intel) Cc: Jiri Slaby Cc: Al Viro Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Eugene Syromiatnikov Cc: Cc: Cc: Johan Hovold Cc: Alan Cox Cc: Signed-off-by: Greg Kroah-Hartman --- arch/alpha/include/asm/termios.h | 8 +++++++- arch/alpha/include/uapi/asm/ioctls.h | 5 +++++ arch/alpha/include/uapi/asm/termbits.h | 17 +++++++++++++++++ 3 files changed, 29 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h index 6a8c53dec57e..b7c77bb1bfd2 100644 --- a/arch/alpha/include/asm/termios.h +++ b/arch/alpha/include/asm/termios.h @@ -73,9 +73,15 @@ }) #define user_termios_to_kernel_termios(k, u) \ - copy_from_user(k, u, sizeof(struct termios)) + copy_from_user(k, u, sizeof(struct termios2)) #define kernel_termios_to_user_termios(u, k) \ + copy_to_user(u, k, sizeof(struct termios2)) + +#define user_termios_to_kernel_termios_1(k, u) \ + copy_from_user(k, u, sizeof(struct termios)) + +#define kernel_termios_to_user_termios_1(u, k) \ copy_to_user(u, k, sizeof(struct termios)) #endif /* _ALPHA_TERMIOS_H */ diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h index 3729d92d3fa8..dc8c20ac7191 100644 --- a/arch/alpha/include/uapi/asm/ioctls.h +++ b/arch/alpha/include/uapi/asm/ioctls.h @@ -32,6 +32,11 @@ #define TCXONC _IO('t', 30) #define TCFLSH _IO('t', 31) +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) + #define TIOCSWINSZ _IOW('t', 103, struct winsize) #define TIOCGWINSZ _IOR('t', 104, struct winsize) #define TIOCSTART _IO('t', 110) /* start output, like ^Q */ diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h index de6c8360fbe3..4575ba34a0ea 100644 --- a/arch/alpha/include/uapi/asm/termbits.h +++ b/arch/alpha/include/uapi/asm/termbits.h @@ -26,6 +26,19 @@ struct termios { speed_t c_ospeed; /* output speed */ }; +/* Alpha has identical termios and termios2 */ + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* Alpha has matching termios and ktermios */ struct ktermios { @@ -152,6 +165,7 @@ struct ktermios { #define B3000000 00034 #define B3500000 00035 #define B4000000 00036 +#define BOTHER 00037 #define CSIZE 00001400 #define CS5 00000000 @@ -169,6 +183,9 @@ struct ktermios { #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define CIBAUD 07600000 +#define IBSHIFT 16 + /* c_lflag bits */ #define ISIG 0x00000080 #define ICANON 0x00000100 From 0033dfd92a5646a78025e86f8df4d5b18181ba2c Mon Sep 17 00:00:00 2001 From: Anton Ivanov Date: Thu, 8 Nov 2018 13:07:23 +0000 Subject: [PATCH 317/726] ubd: fix missing initialization of io_req The SYNC path doesn't initialize io_req->error, which can cause random errors. Before the conversion to blk-mq, we always completed requests with BLK_STS_OK status, but now we actually look at the error field and this issue becomes apparent. Signed-off-by: Anton Ivanov [axboe: fixed up commit message to explain what is actually going on] Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 08831f5d83db..28c40624bcb6 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1305,6 +1305,7 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req, io_req->fds[0] = dev->cow.fd; else io_req->fds[0] = dev->fd; + io_req->error = 0; if (req_op(req) == REQ_OP_FLUSH) { io_req->op = UBD_FLUSH; @@ -1313,9 +1314,7 @@ static int ubd_queue_one_vec(struct blk_mq_hw_ctx *hctx, struct request *req, io_req->cow_offset = -1; io_req->offset = off; io_req->length = bvec->bv_len; - io_req->error = 0; io_req->sector_mask = 0; - io_req->op = rq_data_dir(req) == READ ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; From bb39ba6a8deab70752b836a36c62205b1c65b559 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Nov 2018 06:34:34 +0000 Subject: [PATCH 318/726] sata_rcar: convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto Signed-off-by: Jens Axboe --- drivers/ata/sata_rcar.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 10ecb232245d..4b1ff5bc256a 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -1,14 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Renesas R-Car SATA driver * * Author: Vladimir Barinov * Copyright (C) 2013-2015 Cogent Embedded, Inc. * Copyright (C) 2013-2015 Renesas Solutions Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #include From b469e7e47c8a075cc08bcd1e85d4365134bdcdd5 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 30 Oct 2018 20:29:53 +0200 Subject: [PATCH 319/726] fanotify: fix handling of events on child sub-directory When an event is reported on a sub-directory and the parent inode has a mark mask with FS_EVENT_ON_CHILD|FS_ISDIR, the event will be sent to fsnotify() even if the event type is not in the parent mark mask (e.g. FS_OPEN). Further more, if that event happened on a mount or a filesystem with a mount/sb mark that does have that event type in their mask, the "on child" event will be reported on the mount/sb mark. That is not desired, because user will get a duplicate event for the same action. Note that the event reported on the victim inode is never merged with the event reported on the parent inode, because of the check in should_merge(): old_fsn->inode == new_fsn->inode. Fix this by looking for a match of an actual event type (i.e. not just FS_ISDIR) in parent's inode mark mask and by not reporting an "on child" event to group if event type is only found on mount/sb marks. [backport hint: The bug seems to have always been in fanotify, but this patch will only apply cleanly to v4.19.y] Cc: # v4.19 Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- fs/notify/fanotify/fanotify.c | 10 +++++----- fs/notify/fsnotify.c | 7 +++++-- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c index 5769cf3ff035..e08a6647267b 100644 --- a/fs/notify/fanotify/fanotify.c +++ b/fs/notify/fanotify/fanotify.c @@ -115,12 +115,12 @@ static bool fanotify_should_send_event(struct fsnotify_iter_info *iter_info, continue; mark = iter_info->marks[type]; /* - * if the event is for a child and this inode doesn't care about - * events on the child, don't send it! + * If the event is for a child and this mark doesn't care about + * events on a child, don't send it! */ - if (type == FSNOTIFY_OBJ_TYPE_INODE && - (event_mask & FS_EVENT_ON_CHILD) && - !(mark->mask & FS_EVENT_ON_CHILD)) + if (event_mask & FS_EVENT_ON_CHILD && + (type != FSNOTIFY_OBJ_TYPE_INODE || + !(mark->mask & FS_EVENT_ON_CHILD))) continue; marks_mask |= mark->mask; diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c index 2172ba516c61..d2c34900ae05 100644 --- a/fs/notify/fsnotify.c +++ b/fs/notify/fsnotify.c @@ -167,9 +167,9 @@ int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask parent = dget_parent(dentry); p_inode = parent->d_inode; - if (unlikely(!fsnotify_inode_watches_children(p_inode))) + if (unlikely(!fsnotify_inode_watches_children(p_inode))) { __fsnotify_update_child_dentry_flags(p_inode); - else if (p_inode->i_fsnotify_mask & mask) { + } else if (p_inode->i_fsnotify_mask & mask & ALL_FSNOTIFY_EVENTS) { struct name_snapshot name; /* we are notifying a parent so come up with the new mask which @@ -339,6 +339,9 @@ int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is, sb = mnt->mnt.mnt_sb; mnt_or_sb_mask = mnt->mnt_fsnotify_mask | sb->s_fsnotify_mask; } + /* An event "on child" is not intended for a mount/sb mark */ + if (mask & FS_EVENT_ON_CHILD) + mnt_or_sb_mask = 0; /* * Optimization: srcu_read_lock() has a memory barrier which can From c2c6d3ce0d9a1fae4472fc10755372d022a487a4 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Tue, 23 Oct 2018 16:53:14 +0000 Subject: [PATCH 320/726] ceph: add destination file data sync before doing any remote copy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we try to copy into a file that was just written, any data that is remote copied will be overwritten by our buffered writes once they are flushed.  When this happens, the call to invalidate_inode_pages2_range will also return a -EBUSY error. This patch fixes this by also sync'ing the destination file before starting any copy. Fixes: 503f82a9932d ("ceph: support copy_file_range file operation") Signed-off-by: Luis Henriques Reviewed-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov --- fs/ceph/file.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 27cad84dab23..189df668b6a0 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -1931,10 +1931,17 @@ static ssize_t ceph_copy_file_range(struct file *src_file, loff_t src_off, if (!prealloc_cf) return -ENOMEM; - /* Start by sync'ing the source file */ + /* Start by sync'ing the source and destination files */ ret = file_write_and_wait_range(src_file, src_off, (src_off + len)); - if (ret < 0) + if (ret < 0) { + dout("failed to write src file (%zd)\n", ret); goto out; + } + ret = file_write_and_wait_range(dst_file, dst_off, (dst_off + len)); + if (ret < 0) { + dout("failed to write dst file (%zd)\n", ret); + goto out; + } /* * We need FILE_WR caps for dst_ci and FILE_RD for src_ci as other From 71f2cc64d027d712f29bf8d09d3e123302d5f245 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Mon, 5 Nov 2018 19:00:52 +0000 Subject: [PATCH 321/726] ceph: quota: fix null pointer dereference in quota check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a possible null pointer dereference in check_quota_exceeded, detected by the static checker smatch, with the following warning:    fs/ceph/quota.c:240 check_quota_exceeded()     error: we previously assumed 'realm' could be null (see line 188) Fixes: b7a2921765cf ("ceph: quota: support for ceph.quota.max_files") Reported-by: Dan Carpenter Signed-off-by: Luis Henriques Reviewed-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov --- fs/ceph/quota.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/quota.c b/fs/ceph/quota.c index 32d4f13784ba..03f4d24db8fe 100644 --- a/fs/ceph/quota.c +++ b/fs/ceph/quota.c @@ -237,7 +237,8 @@ static bool check_quota_exceeded(struct inode *inode, enum quota_check_op op, ceph_put_snap_realm(mdsc, realm); realm = next; } - ceph_put_snap_realm(mdsc, realm); + if (realm) + ceph_put_snap_realm(mdsc, realm); up_read(&mdsc->snap_rwsem); return exceeded; From 23c625ce3065e40c933a4239efb9b11f1194a343 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Thu, 8 Nov 2018 14:55:21 +0100 Subject: [PATCH 322/726] libceph: assume argonaut on the server side No one is running pre-argonaut. In addition one of the argonaut features (NOSRCADDR) has been required since day one (and a half, 2.6.34 vs 2.6.35) of the kernel client. Allow for the possibility of reusing these feature bits later. Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil --- fs/ceph/mds_client.c | 12 +++--------- include/linux/ceph/ceph_features.h | 8 +------- 2 files changed, 4 insertions(+), 16 deletions(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 67a9aeb2f4ec..bd13a3267ae0 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -80,12 +80,8 @@ static int parse_reply_info_in(void **p, void *end, info->symlink = *p; *p += info->symlink_len; - if (features & CEPH_FEATURE_DIRLAYOUTHASH) - ceph_decode_copy_safe(p, end, &info->dir_layout, - sizeof(info->dir_layout), bad); - else - memset(&info->dir_layout, 0, sizeof(info->dir_layout)); - + ceph_decode_copy_safe(p, end, &info->dir_layout, + sizeof(info->dir_layout), bad); ceph_decode_32_safe(p, end, info->xattr_len, bad); ceph_decode_need(p, end, info->xattr_len, bad); info->xattr_data = *p; @@ -3182,10 +3178,8 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc, recon_state.pagelist = pagelist; if (session->s_con.peer_features & CEPH_FEATURE_MDSENC) recon_state.msg_version = 3; - else if (session->s_con.peer_features & CEPH_FEATURE_FLOCK) - recon_state.msg_version = 2; else - recon_state.msg_version = 1; + recon_state.msg_version = 2; err = iterate_session_caps(session, encode_caps_cb, &recon_state); if (err < 0) goto fail; diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h index 6b92b3395fa9..65a38c4a02a1 100644 --- a/include/linux/ceph/ceph_features.h +++ b/include/linux/ceph/ceph_features.h @@ -213,12 +213,6 @@ DEFINE_CEPH_FEATURE_DEPRECATED(63, 1, RESERVED_BROKEN, LUMINOUS) // client-facin CEPH_FEATURE_NEW_OSDOPREPLY_ENCODING | \ CEPH_FEATURE_CEPHX_V2) -#define CEPH_FEATURES_REQUIRED_DEFAULT \ - (CEPH_FEATURE_NOSRCADDR | \ - CEPH_FEATURE_SUBSCRIBE2 | \ - CEPH_FEATURE_RECONNECT_SEQ | \ - CEPH_FEATURE_PGID64 | \ - CEPH_FEATURE_PGPOOL3 | \ - CEPH_FEATURE_OSDENC) +#define CEPH_FEATURES_REQUIRED_DEFAULT 0 #endif From 01310bb7c9c98752cc763b36532fab028e0f8f81 Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Thu, 8 Nov 2018 11:11:36 -0500 Subject: [PATCH 323/726] nfsd: COPY and CLONE operations require the saved filehandle to be set Make sure we have a saved filehandle, otherwise we'll oops with a null pointer dereference in nfs4_preprocess_stateid_op(). Signed-off-by: Scott Mayhew Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index edff074d38c7..d505990dac7c 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1038,6 +1038,9 @@ nfsd4_verify_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, { __be32 status; + if (!cstate->save_fh.fh_dentry) + return nfserr_nofilehandle; + status = nfs4_preprocess_stateid_op(rqstp, cstate, &cstate->save_fh, src_stateid, RD_STATE, src, NULL); if (status) { From 025911a5f4e36955498ed50806ad1b02f0f76288 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 8 Nov 2018 02:04:57 +0000 Subject: [PATCH 324/726] SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer() There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 5cfb9e0a18dc..f302c6eb8779 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -546,7 +546,7 @@ EXPORT_SYMBOL_GPL(xdr_commit_encode); static __be32 *xdr_get_next_encode_buffer(struct xdr_stream *xdr, size_t nbytes) { - static __be32 *p; + __be32 *p; int space_left; int frag1bytes, frag2bytes; From 017ce359a7187192df5222a00fa3c9055eb3736d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Nov 2018 12:06:43 +0100 Subject: [PATCH 325/726] ACPI / PMIC: xpower: fix IOSF_MBI dependency We still get a link failure with IOSF_MBI=m when the xpower driver is built-in: drivers/acpi/pmic/intel_pmic_xpower.o: In function `intel_xpower_pmic_update_power': intel_pmic_xpower.c:(.text+0x4f2): undefined reference to `iosf_mbi_block_punit_i2c_access' intel_pmic_xpower.c:(.text+0x5e2): undefined reference to `iosf_mbi_unblock_punit_i2c_access' This makes the dependency stronger, so we can only build when IOSF_MBI is built-in. Fixes: 6a9b593d4b6f (ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry) Signed-off-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 8f3a444c6ea9..7cea769c37df 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -512,7 +512,7 @@ config CRC_PMIC_OPREGION config XPOWER_PMIC_OPREGION bool "ACPI operation region support for XPower AXP288 PMIC" - depends on MFD_AXP20X_I2C && IOSF_MBI + depends on MFD_AXP20X_I2C && IOSF_MBI=y help This config adds ACPI operation region support for XPower AXP288 PMIC. From aeaf6a4b2d9ed4373e39a64c1c10cb1d93dd6bd1 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 7 Nov 2018 17:40:58 +0000 Subject: [PATCH 326/726] dt-bindings: cpufreq: remove stale arm_big_little_dt entry Most of the ARM platforms used v2 OPP bindings to support big-little configurations. This arm_big_little_dt binding is incomplete and was never used. Commit f174e49e4906 (cpufreq: remove unused arm_big_little_dt driver) removed the driver supporting this binding, but the binding was left unnoticed, so let's get rid of it now. Fixes: f174e49e4906 (cpufreq: remove unused arm_big_little_dt driver) Signed-off-by: Sudeep Holla Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- .../bindings/cpufreq/arm_big_little_dt.txt | 65 ------------------- 1 file changed, 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt deleted file mode 100644 index 2aa06ac0fac5..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt +++ /dev/null @@ -1,65 +0,0 @@ -Generic ARM big LITTLE cpufreq driver's DT glue ------------------------------------------------ - -This is DT specific glue layer for generic cpufreq driver for big LITTLE -systems. - -Both required and optional properties listed below must be defined -under node /cpus/cpu@x. Where x is the first cpu inside a cluster. - -FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster -must be present contiguously. Generic DT driver will check only node 'x' for -cpu:x. - -Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt - for details - -Optional properties: -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. - -Examples: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a15"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - reg = <1>; - next-level-cache = <&L2>; - }; - - cpu@100 { - compatible = "arm,cortex-a7"; - reg = <100>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 950000 - 396000 750000 - 198000 450000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@101 { - compatible = "arm,cortex-a7"; - reg = <101>; - next-level-cache = <&L2>; - }; -}; From 26a4676faa1ad5d99317e0cd701e5d6f3e716b77 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 7 Nov 2018 18:10:38 +0100 Subject: [PATCH 327/726] arm64: mm: define NET_IP_ALIGN to 0 On arm64, there is no need to add 2 bytes of padding to the start of each network buffer just to make the IP header appear 32-bit aligned. Since this might actually adversely affect DMA performance some platforms, let's override NET_IP_ALIGN to 0 to get rid of this padding. Acked-by: Ilias Apalodimas Tested-by: Ilias Apalodimas Acked-by: Mark Rutland Acked-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/processor.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 3e2091708b8e..6b0d4dff5012 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -24,6 +24,14 @@ #define KERNEL_DS UL(-1) #define USER_DS (TASK_SIZE_64 - 1) +/* + * On arm64 systems, unaligned accesses by the CPU are cheap, and so there is + * no point in shifting all network buffers by 2 bytes just to make some IP + * header fields appear aligned in memory, potentially sacrificing some DMA + * performance on some platforms. + */ +#define NET_IP_ALIGN 0 + #ifndef __ASSEMBLY__ #ifdef __KERNEL__ From 763f191af51f127cf8e69cd361f50bf6180768a5 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 1 Nov 2018 13:22:38 +0100 Subject: [PATCH 328/726] ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO There's no point to register the cpuidle driver for the current CPU, when the initialization of the arch specific back-end data fails by returning -ENXIO. Instead, let's re-order the sequence to its original flow, by first trying to initialize the back-end part and then act accordingly on the returned error code. Additionally, let's print the error message, no matter of what error code that was returned. Fixes: a0d46a3dfdc3 (ARM: cpuidle: Register per cpuidle device) Signed-off-by: Ulf Hansson Reviewed-by: Daniel Lezcano Cc: 4.19+ # v4.19+ Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/cpuidle-arm.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/cpuidle/cpuidle-arm.c b/drivers/cpuidle/cpuidle-arm.c index 073557f433eb..df564d783216 100644 --- a/drivers/cpuidle/cpuidle-arm.c +++ b/drivers/cpuidle/cpuidle-arm.c @@ -103,13 +103,6 @@ static int __init arm_idle_init_cpu(int cpu) goto out_kfree_drv; } - ret = cpuidle_register_driver(drv); - if (ret) { - if (ret != -EBUSY) - pr_err("Failed to register cpuidle driver\n"); - goto out_kfree_drv; - } - /* * Call arch CPU operations in order to initialize * idle states suspend back-end specific data @@ -117,15 +110,20 @@ static int __init arm_idle_init_cpu(int cpu) ret = arm_cpuidle_init(cpu); /* - * Skip the cpuidle device initialization if the reported + * Allow the initialization to continue for other CPUs, if the reported * failure is a HW misconfiguration/breakage (-ENXIO). */ - if (ret == -ENXIO) - return 0; - if (ret) { pr_err("CPU %d failed to init idle CPU ops\n", cpu); - goto out_unregister_drv; + ret = ret == -ENXIO ? 0 : ret; + goto out_kfree_drv; + } + + ret = cpuidle_register_driver(drv); + if (ret) { + if (ret != -EBUSY) + pr_err("Failed to register cpuidle driver\n"); + goto out_kfree_drv; } dev = kzalloc(sizeof(*dev), GFP_KERNEL); From 3e452e636d006fa759a9914c044398869acba98f Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 1 Nov 2018 11:15:58 +0100 Subject: [PATCH 329/726] ARM: cpuidle: Convert to use cpuidle_register|unregister() The only reason that remains, to why the ARM cpuidle driver calls cpuidle_register_driver(), is to avoid printing an error message in case another driver already have been registered for the CPU. This seems a bit silly, but more importantly, if that is a common scenario, perhaps we should change cpuidle_register() accordingly instead. In either case, let's consolidate the code, by converting to use cpuidle_register|unregister(), which also avoids the unnecessary allocation of the struct cpuidle_device. Signed-off-by: Ulf Hansson Reviewed-by: Lorenzo Pieralisi Reviewed-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/cpuidle-arm.c | 30 +++--------------------------- 1 file changed, 3 insertions(+), 27 deletions(-) diff --git a/drivers/cpuidle/cpuidle-arm.c b/drivers/cpuidle/cpuidle-arm.c index df564d783216..3a407a3ef22b 100644 --- a/drivers/cpuidle/cpuidle-arm.c +++ b/drivers/cpuidle/cpuidle-arm.c @@ -82,7 +82,6 @@ static int __init arm_idle_init_cpu(int cpu) { int ret; struct cpuidle_driver *drv; - struct cpuidle_device *dev; drv = kmemdup(&arm_idle_driver, sizeof(*drv), GFP_KERNEL); if (!drv) @@ -119,33 +118,12 @@ static int __init arm_idle_init_cpu(int cpu) goto out_kfree_drv; } - ret = cpuidle_register_driver(drv); - if (ret) { - if (ret != -EBUSY) - pr_err("Failed to register cpuidle driver\n"); + ret = cpuidle_register(drv, NULL); + if (ret) goto out_kfree_drv; - } - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - ret = -ENOMEM; - goto out_unregister_drv; - } - dev->cpu = cpu; - - ret = cpuidle_register_device(dev); - if (ret) { - pr_err("Failed to register cpuidle device for CPU %d\n", - cpu); - goto out_kfree_dev; - } return 0; -out_kfree_dev: - kfree(dev); -out_unregister_drv: - cpuidle_unregister_driver(drv); out_kfree_drv: kfree(drv); return ret; @@ -176,9 +154,7 @@ out_fail: while (--cpu >= 0) { dev = per_cpu(cpuidle_devices, cpu); drv = cpuidle_get_cpu_driver(dev); - cpuidle_unregister_device(dev); - cpuidle_unregister_driver(drv); - kfree(dev); + cpuidle_unregister(drv); kfree(drv); } From 24cc61d8cb5a9232fadf21a830061853c1268fdd Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 7 Nov 2018 15:16:06 +0100 Subject: [PATCH 330/726] arm64: memblock: don't permit memblock resizing until linear mapping is up Bhupesh reports that having numerous memblock reservations at early boot may result in the following crash: Unable to handle kernel paging request at virtual address ffff80003ffe0000 ... Call trace: __memcpy+0x110/0x180 memblock_add_range+0x134/0x2e8 memblock_reserve+0x70/0xb8 memblock_alloc_base_nid+0x6c/0x88 __memblock_alloc_base+0x3c/0x4c memblock_alloc_base+0x28/0x4c memblock_alloc+0x2c/0x38 early_pgtable_alloc+0x20/0xb0 paging_init+0x28/0x7f8 This is caused by the fact that we permit memblock resizing before the linear mapping is up, and so the memblock_reserved() array is moved into memory that is not mapped yet. So let's ensure that this crash can no longer occur, by deferring to call to memblock_allow_resize() to after the linear mapping has been created. Reported-by: Bhupesh Sharma Acked-by: Will Deacon Tested-by: Marc Zyngier Signed-off-by: Ard Biesheuvel Signed-off-by: Catalin Marinas --- arch/arm64/mm/init.c | 2 -- arch/arm64/mm/mmu.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 9d9582cac6c4..9b432d9fcada 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -483,8 +483,6 @@ void __init arm64_memblock_init(void) high_memory = __va(memblock_end_of_DRAM() - 1) + 1; dma_contiguous_reserve(arm64_dma_phys_limit); - - memblock_allow_resize(); } void __init bootmem_init(void) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 394b8d554def..d1d6601b385d 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -659,6 +659,8 @@ void __init paging_init(void) memblock_free(__pa_symbol(init_pg_dir), __pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir)); + + memblock_allow_resize(); } /* From e2576c8bdfd462c34b8a46c0084e7c30b0851bf4 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Tue, 6 Nov 2018 00:08:20 +0100 Subject: [PATCH 331/726] clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems with reboot; e.g. a ~60 second delay between issuing reboot and the board power cycling (and in some OS configurations reboot will fail and require manual power cycling). Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4 Co-Processor seems to depend on FCLK_DIV3 being operational. Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk: meson: add fdiv clock gates"), this clock was modeled and left on by the bootloader. We don't have precise documentation about the SCPI Co-Processor and its clock requirement so we are learning things the hard way. Marking this clock as critical solves the problem but it should not be viewed as final solution. Ideally, the SCPI driver should claim these clocks. We also depends on some clock hand-off mechanism making its way to CCF, to make sure the clock stays on between its registration and the SCPI driver probe. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Christian Hewitt Signed-off-by: Jerome Brunet Signed-off-by: Stephen Boyd --- drivers/clk/meson/gxbb.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 9309cfaaa464..4ada9668fd49 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -506,6 +506,18 @@ static struct clk_regmap gxbb_fclk_div3 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div3_div" }, .num_parents = 1, + /* + * FIXME: + * This clock, as fdiv2, is used by the SCPI FW and is required + * by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) The SCPI generic driver claims and enable all the clocks + * it needs + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; From d6ee1e7e9004d3d246cdfa14196989e0a9466c16 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 8 Nov 2018 10:31:23 +0100 Subject: [PATCH 332/726] clk: meson: axg: mark fdiv2 and fdiv3 as critical Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor uses the fdiv2 and fdiv3 to, among other things, provide the cpu clock. Until clock hand-off mechanism makes its way to CCF and the generic SCPI claims platform specific clocks, these clocks must be marked as critical to make sure they are never disabled when needed by the co-processor. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Stephen Boyd --- drivers/clk/meson/axg.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index c981159b02c0..792735d7e46e 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -325,6 +325,7 @@ static struct clk_regmap axg_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; @@ -349,6 +350,18 @@ static struct clk_regmap axg_fclk_div3 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div3_div" }, .num_parents = 1, + /* + * FIXME: + * This clock, as fdiv2, is used by the SCPI FW and is required + * by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) The SCPI generic driver claims and enable all the clocks + * it needs + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, }, }; From 6778be4e520959659b27a441c06a84c9cb009085 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 7 Nov 2018 16:30:32 +0000 Subject: [PATCH 333/726] of/device: Really only set bus DMA mask when appropriate of_dma_configure() was *supposed* to be following the same logic as acpi_dma_configure() and only setting bus_dma_mask if some range was specified by the firmware. However, it seems that subtlety got lost in the process of fitting it into the differently-shaped control flow, and as a result the force_dma==true case ends up always setting the bus mask to the 32-bit default, which is not what anyone wants. Make sure we only touch it if the DT actually said so. Fixes: 6c2fb2ea7636 ("of/device: Set bus DMA mask as appropriate") Reported-by: Aaro Koskinen Reported-by: Jean-Philippe Brucker Tested-by: Aaro Koskinen Tested-by: John Stultz Tested-by: Geert Uytterhoeven Tested-by: Robert Richter Signed-off-by: Robin Murphy Signed-off-by: Rob Herring --- drivers/of/device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/of/device.c b/drivers/of/device.c index 84e810421418..258742830e36 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -149,9 +149,11 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma) * set by the driver. */ mask = DMA_BIT_MASK(ilog2(dma_addr + size - 1) + 1); - dev->bus_dma_mask = mask; dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; + /* ...but only set bus mask if we found valid dma-ranges earlier */ + if (!ret) + dev->bus_dma_mask = mask; coherent = of_dma_is_coherent(np); dev_dbg(dev, "device is%sdma coherent\n", From 89c38422e072bb453e3045b8f1b962a344c3edea Mon Sep 17 00:00:00 2001 From: John Garry Date: Thu, 8 Nov 2018 18:17:03 +0800 Subject: [PATCH 334/726] of, numa: Validate some distance map rules Currently the NUMA distance map parsing does not validate the distance table for the distance-matrix rules 1-2 in [1]. However the arch NUMA code may enforce some of these rules, but not all. Such is the case for the arm64 port, which does not enforce the rule that the distance between separates nodes cannot equal LOCAL_DISTANCE. The patch adds the following rules validation: - distance of node to self equals LOCAL_DISTANCE - distance of separate nodes > LOCAL_DISTANCE This change avoids a yet-unresolved crash reported in [2]. A note on dealing with symmetrical distances between nodes: Validating symmetrical distances between nodes is difficult. If it were mandated in the bindings that every distance must be recorded in the table, then it would be easy. However, it isn't. In addition to this, it is also possible to record [b, a] distance only (and not [a, b]). So, when processing the table for [b, a], we cannot assert that current distance of [a, b] != [b, a] as invalid, as [a, b] distance may not be present in the table and current distance would be default at REMOTE_DISTANCE. As such, we maintain the policy that we overwrite distance [a, b] = [b, a] for b > a. This policy is different to kernel ACPI SLIT validation, which allows non-symmetrical distances (ACPI spec SLIT rules allow it). However, the distance debug message is dropped as it may be misleading (for a distance which is later overwritten). Some final notes on semantics: - It is implied that it is the responsibility of the arch NUMA code to reset the NUMA distance map for an error in distance map parsing. - It is the responsibility of the FW NUMA topology parsing (whether OF or ACPI) to enforce NUMA distance rules, and not arch NUMA code. [1] Documents/devicetree/bindings/numa.txt [2] https://www.spinics.net/lists/arm-kernel/msg683304.html Cc: stable@vger.kernel.org # 4.7 Signed-off-by: John Garry Acked-by: Will Deacon Signed-off-by: Rob Herring --- drivers/of/of_numa.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c index 35c64a4295e0..fe6b13608e51 100644 --- a/drivers/of/of_numa.c +++ b/drivers/of/of_numa.c @@ -104,9 +104,14 @@ static int __init of_numa_parse_distance_map_v1(struct device_node *map) distance = of_read_number(matrix, 1); matrix++; + if ((nodea == nodeb && distance != LOCAL_DISTANCE) || + (nodea != nodeb && distance <= LOCAL_DISTANCE)) { + pr_err("Invalid distance[node%d -> node%d] = %d\n", + nodea, nodeb, distance); + return -EINVAL; + } + numa_set_distance(nodea, nodeb, distance); - pr_debug("distance[node%d -> node%d] = %d\n", - nodea, nodeb, distance); /* Set default distance of node B->A same as A->B */ if (nodeb > nodea) From e12c225258f2584906765234ca6db4ad4c618192 Mon Sep 17 00:00:00 2001 From: Huazhong Tan Date: Thu, 8 Nov 2018 10:13:19 +0800 Subject: [PATCH 335/726] net: hns3: bugfix for not checking return value hns3_reset_notify_init_enet() only return error early if the return value of hns3_restore_vlan() is not 0. This patch adds checking for the return value of hns3_restore_vlan. Fixes: 7fa6be4fd2f6 ("net: hns3: fix incorrect return value/type of some functions") Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 3f96aa30068e..20fcf0d1c2ce 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3760,7 +3760,8 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle) /* Hardware table is only clear when pf resets */ if (!(handle->flags & HNAE3_SUPPORT_VF)) { ret = hns3_restore_vlan(netdev); - return ret; + if (ret) + return ret; } ret = hns3_restore_fd_rules(netdev); From f2ffd4e5bc7b629b312be48fbe3c3a2afbd67e4a Mon Sep 17 00:00:00 2001 From: Bill Kuzeja Date: Mon, 5 Nov 2018 11:23:50 -0500 Subject: [PATCH 336/726] scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter When doing a surprise removal of an adapter, some in flight I/Os can get stuck and take a while to complete (they actually time out and are retried). We are not handling an early error exit from qla2xxx_eh_abort properly. Fixes: 45235022da99 ("scsi: qla2xxx: Fix driver unload by shutting down chip") Signed-off-by: Bill Kuzeja Reviewed-by: Laurence Oberman Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 20c85eed1a75..b658b9a5eb1e 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1749,7 +1749,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) static void __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res) { - int cnt; + int cnt, status; unsigned long flags; srb_t *sp; scsi_qla_host_t *vha = qp->vha; @@ -1799,10 +1799,16 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res) if (!sp_get(sp)) { spin_unlock_irqrestore (qp->qp_lock_ptr, flags); - qla2xxx_eh_abort( + status = qla2xxx_eh_abort( GET_CMD_SP(sp)); spin_lock_irqsave (qp->qp_lock_ptr, flags); + /* + * Get rid of extra reference caused + * by early exit from qla2xxx_eh_abort + */ + if (status == FAST_IO_FAIL) + atomic_dec(&sp->ref_count); } } sp->done(sp, res); From 8e4829c6f7470722c1f5a1dc5769ebe09ef036d6 Mon Sep 17 00:00:00 2001 From: Wei Li Date: Thu, 8 Nov 2018 09:08:29 -0800 Subject: [PATCH 337/726] scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC Hynix ufs has deviations on hi36xx platform which will result in ufs bursts transfer failures. To fix the problem, the Hynix device must set the register VS_DebugSaveConfigTime to 0x10, which will set time reference for SaveConfigTime is 250 ns. The time reference for SaveConfigTime is 40 ns by default. This patch is necessary to boot on HiKey960 boards that use Hynix UFS chips (H28U62301AMR model: hB8aL1). Cc: Vinayak Holikatti Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: linux-scsi@vger.kernel.org Signed-off-by: Wei Li Signed-off-by: Dmitry Shmidt [jstultz: Forward ported from older code, slight tweak to commit message] Signed-off-by: John Stultz Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufs-hisi.c | 9 +++++++++ drivers/scsi/ufs/ufs_quirks.h | 6 ++++++ drivers/scsi/ufs/ufshcd.c | 2 ++ 3 files changed, 17 insertions(+) diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c index 46df707e6f2c..452e19f8fb47 100644 --- a/drivers/scsi/ufs/ufs-hisi.c +++ b/drivers/scsi/ufs/ufs-hisi.c @@ -20,6 +20,7 @@ #include "unipro.h" #include "ufs-hisi.h" #include "ufshci.h" +#include "ufs_quirks.h" static int ufs_hisi_check_hibern8(struct ufs_hba *hba) { @@ -390,6 +391,14 @@ static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param) static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) { + if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME) { + pr_info("ufs flash device must set VS_DebugSaveConfigTime 0x10\n"); + /* VS_DebugSaveConfigTime */ + ufshcd_dme_set(hba, UIC_ARG_MIB(0xD0A0), 0x10); + /* sync length */ + ufshcd_dme_set(hba, UIC_ARG_MIB(0x1556), 0x48); + } + /* update */ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1); /* PA_TxSkip */ diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h index 71f73d1d1ad1..5d2dfdb41a6f 100644 --- a/drivers/scsi/ufs/ufs_quirks.h +++ b/drivers/scsi/ufs/ufs_quirks.h @@ -131,4 +131,10 @@ struct ufs_dev_fix { */ #define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8) +/* + * Some UFS devices require VS_DebugSaveConfigTime is 0x10, + * enabling this quirk ensure this. + */ +#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9) + #endif /* UFS_QUIRKS_H_ */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 27db55b0ca7f..f1c57cd33b5b 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -231,6 +231,8 @@ static struct ufs_dev_fix ufs_fixups[] = { UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ), UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME), + UFS_FIX(UFS_VENDOR_SKHYNIX, "hB8aL1" /*H28U62301AMR*/, + UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME), END_FIX }; From 0d5b9311baf27bb545f187f12ecfd558220c607d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 8 Nov 2018 17:34:27 -0800 Subject: [PATCH 338/726] inet: frags: better deal with smp races MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Multiple cpus might attempt to insert a new fragment in rhashtable, if for example RPS is buggy, as reported by 배석진 in https://patchwork.ozlabs.org/patch/994601/ We use rhashtable_lookup_get_insert_key() instead of rhashtable_insert_fast() to let cpus losing the race free their own inet_frag_queue and use the one that was inserted by another cpu. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Eric Dumazet Reported-by: 배석진 Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index bcb11f3a27c0..760a9e52e02b 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -178,21 +178,22 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf, } static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, - void *arg) + void *arg, + struct inet_frag_queue **prev) { struct inet_frags *f = nf->f; struct inet_frag_queue *q; - int err; q = inet_frag_alloc(nf, f, arg); - if (!q) + if (!q) { + *prev = ERR_PTR(-ENOMEM); return NULL; - + } mod_timer(&q->timer, jiffies + nf->timeout); - err = rhashtable_insert_fast(&nf->rhashtable, &q->node, - f->rhash_params); - if (err < 0) { + *prev = rhashtable_lookup_get_insert_key(&nf->rhashtable, &q->key, + &q->node, f->rhash_params); + if (*prev) { q->flags |= INET_FRAG_COMPLETE; inet_frag_kill(q); inet_frag_destroy(q); @@ -204,22 +205,22 @@ static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, /* TODO : call from rcu_read_lock() and no longer use refcount_inc_not_zero() */ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, void *key) { - struct inet_frag_queue *fq; + struct inet_frag_queue *fq = NULL, *prev; if (!nf->high_thresh || frag_mem_limit(nf) > nf->high_thresh) return NULL; rcu_read_lock(); - fq = rhashtable_lookup(&nf->rhashtable, key, nf->f->rhash_params); - if (fq) { + prev = rhashtable_lookup(&nf->rhashtable, key, nf->f->rhash_params); + if (!prev) + fq = inet_frag_create(nf, key, &prev); + if (prev && !IS_ERR(prev)) { + fq = prev; if (!refcount_inc_not_zero(&fq->refcnt)) fq = NULL; - rcu_read_unlock(); - return fq; } rcu_read_unlock(); - - return inet_frag_create(nf, key); + return fq; } EXPORT_SYMBOL(inet_frag_find); From 39477551df940ddb1339203817de04f5caaacf7a Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:08 +0200 Subject: [PATCH 339/726] qed: Fix memory/entry leak in qed_init_sp_request() Free the allocated SPQ entry or return the acquired SPQ entry to the free list in error flows. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qed/qed_sp_commands.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c index 77b6248ad3b9..e86a1ea23613 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c @@ -80,7 +80,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, case QED_SPQ_MODE_BLOCK: if (!p_data->p_comp_data) - return -EINVAL; + goto err; p_ent->comp_cb.cookie = p_data->p_comp_data->cookie; break; @@ -95,7 +95,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, default: DP_NOTICE(p_hwfn, "Unknown SPQE completion mode %d\n", p_ent->comp_mode); - return -EINVAL; + goto err; } DP_VERBOSE(p_hwfn, QED_MSG_SPQ, @@ -109,6 +109,18 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, memset(&p_ent->ramrod, 0, sizeof(p_ent->ramrod)); return 0; + +err: + /* qed_spq_get_entry() can either get an entry from the free_pool, + * or, if no entries are left, allocate a new entry and add it to + * the unlimited_pending list. + */ + if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) + kfree(p_ent); + else + qed_spq_return_entry(p_hwfn, p_ent); + + return -EINVAL; } static enum tunnel_clss qed_tunn_clss_to_fw_clss(u8 type) From 2632f22ebd08da249c2017962a199a0cfb2324bf Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:09 +0200 Subject: [PATCH 340/726] qed: Fix blocking/unlimited SPQ entries leak When there are no SPQ entries left in the free_pool, new entries are allocated and are added to the unlimited list. When an entry in the pool is available, the content is copied from the original entry, and the new entry is sent to the device. qed_spq_post() is not aware of that, so the additional entry is stored in the original entry as p_post_ent, which can later be returned to the pool. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sp.h | 3 ++ drivers/net/ethernet/qlogic/qed/qed_spq.c | 57 ++++++++++++----------- 2 files changed, 33 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h index e95431f6acd4..04259df8a5c2 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h @@ -167,6 +167,9 @@ struct qed_spq_entry { enum spq_mode comp_mode; struct qed_spq_comp_cb comp_cb; struct qed_spq_comp_done comp_done; /* SPQ_MODE_EBLOCK */ + + /* Posted entry for unlimited list entry in EBLOCK mode */ + struct qed_spq_entry *post_ent; }; struct qed_eq { diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index c4a6274dd625..c1a81ec0524b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -685,6 +685,8 @@ static int qed_spq_add_entry(struct qed_hwfn *p_hwfn, /* EBLOCK responsible to free the allocated p_ent */ if (p_ent->comp_mode != QED_SPQ_MODE_EBLOCK) kfree(p_ent); + else + p_ent->post_ent = p_en2; p_ent = p_en2; } @@ -767,6 +769,25 @@ static int qed_spq_pend_post(struct qed_hwfn *p_hwfn) SPQ_HIGH_PRI_RESERVE_DEFAULT); } +/* Avoid overriding of SPQ entries when getting out-of-order completions, by + * marking the completions in a bitmap and increasing the chain consumer only + * for the first successive completed entries. + */ +static void qed_spq_comp_bmap_update(struct qed_hwfn *p_hwfn, __le16 echo) +{ + u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE; + struct qed_spq *p_spq = p_hwfn->p_spq; + + __set_bit(pos, p_spq->p_comp_bitmap); + while (test_bit(p_spq->comp_bitmap_idx, + p_spq->p_comp_bitmap)) { + __clear_bit(p_spq->comp_bitmap_idx, + p_spq->p_comp_bitmap); + p_spq->comp_bitmap_idx++; + qed_chain_return_produced(&p_spq->chain); + } +} + int qed_spq_post(struct qed_hwfn *p_hwfn, struct qed_spq_entry *p_ent, u8 *fw_return_code) { @@ -824,11 +845,12 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, p_ent->queue == &p_spq->unlimited_pending); if (p_ent->queue == &p_spq->unlimited_pending) { - /* This is an allocated p_ent which does not need to - * return to pool. - */ + struct qed_spq_entry *p_post_ent = p_ent->post_ent; + kfree(p_ent); - return rc; + + /* Return the entry which was actually posted */ + p_ent = p_post_ent; } if (rc) @@ -842,7 +864,7 @@ int qed_spq_post(struct qed_hwfn *p_hwfn, spq_post_fail2: spin_lock_bh(&p_spq->lock); list_del(&p_ent->list); - qed_chain_return_produced(&p_spq->chain); + qed_spq_comp_bmap_update(p_hwfn, p_ent->elem.hdr.echo); spq_post_fail: /* return to the free pool */ @@ -874,25 +896,8 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, spin_lock_bh(&p_spq->lock); list_for_each_entry_safe(p_ent, tmp, &p_spq->completion_pending, list) { if (p_ent->elem.hdr.echo == echo) { - u16 pos = le16_to_cpu(echo) % SPQ_RING_SIZE; - list_del(&p_ent->list); - - /* Avoid overriding of SPQ entries when getting - * out-of-order completions, by marking the completions - * in a bitmap and increasing the chain consumer only - * for the first successive completed entries. - */ - __set_bit(pos, p_spq->p_comp_bitmap); - - while (test_bit(p_spq->comp_bitmap_idx, - p_spq->p_comp_bitmap)) { - __clear_bit(p_spq->comp_bitmap_idx, - p_spq->p_comp_bitmap); - p_spq->comp_bitmap_idx++; - qed_chain_return_produced(&p_spq->chain); - } - + qed_spq_comp_bmap_update(p_hwfn, echo); p_spq->comp_count++; found = p_ent; break; @@ -931,11 +936,9 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn, QED_MSG_SPQ, "Got a completion without a callback function\n"); - if ((found->comp_mode != QED_SPQ_MODE_EBLOCK) || - (found->queue == &p_spq->unlimited_pending)) + if (found->comp_mode != QED_SPQ_MODE_EBLOCK) /* EBLOCK is responsible for returning its own entry into the - * free list, unless it originally added the entry into the - * unlimited pending list. + * free list. */ qed_spq_return_entry(p_hwfn, found); From fb5e7438e7a3c8966e04ccb0760170e9e06f3699 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Thu, 8 Nov 2018 16:46:10 +0200 Subject: [PATCH 341/726] qed: Fix SPQ entries not returned to pool in error flows qed_sp_destroy_request() API was added for SPQ users that need to free/return the entry they acquired in their error flows. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_fcoe.c | 11 +++++++--- drivers/net/ethernet/qlogic/qed/qed_iscsi.c | 1 + drivers/net/ethernet/qlogic/qed/qed_l2.c | 12 ++++++---- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 1 + drivers/net/ethernet/qlogic/qed/qed_roce.c | 1 + drivers/net/ethernet/qlogic/qed/qed_sp.h | 11 ++++++++++ .../net/ethernet/qlogic/qed/qed_sp_commands.c | 22 ++++++++++++------- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 + 8 files changed, 45 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c index cc1b373c0ace..46dc93d3b9b5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_fcoe.c +++ b/drivers/net/ethernet/qlogic/qed/qed_fcoe.c @@ -147,7 +147,8 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, "Cannot satisfy CQ amount. CQs requested %d, CQs available %d. Aborting function start\n", fcoe_pf_params->num_cqs, p_hwfn->hw_info.feat_num[QED_FCOE_CQ]); - return -EINVAL; + rc = -EINVAL; + goto err; } p_data->mtu = cpu_to_le16(fcoe_pf_params->mtu); @@ -156,14 +157,14 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, rc = qed_cxt_acquire_cid(p_hwfn, PROTOCOLID_FCOE, &dummy_cid); if (rc) - return rc; + goto err; cxt_info.iid = dummy_cid; rc = qed_cxt_get_cid_info(p_hwfn, &cxt_info); if (rc) { DP_NOTICE(p_hwfn, "Cannot find context info for dummy cid=%d\n", dummy_cid); - return rc; + goto err; } p_cxt = cxt_info.p_cxt; SET_FIELD(p_cxt->tstorm_ag_context.flags3, @@ -240,6 +241,10 @@ qed_sp_fcoe_func_start(struct qed_hwfn *p_hwfn, rc = qed_spq_post(p_hwfn, p_ent, NULL); return rc; + +err: + qed_sp_destroy_request(p_hwfn, p_ent); + return rc; } static int diff --git a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c index 1135387bd99d..4f8a685d1a55 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_iscsi.c +++ b/drivers/net/ethernet/qlogic/qed/qed_iscsi.c @@ -200,6 +200,7 @@ qed_sp_iscsi_func_start(struct qed_hwfn *p_hwfn, "Cannot satisfy CQ amount. Queues requested %d, CQs available %d. Aborting function start\n", p_params->num_queues, p_hwfn->hw_info.feat_num[QED_ISCSI_CQ]); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 82a1bd1f8a8c..67c02ea93906 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -740,8 +740,7 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, rc = qed_sp_vport_update_rss(p_hwfn, p_ramrod, p_rss_params); if (rc) { - /* Return spq entry which is taken in qed_sp_init_request()*/ - qed_spq_return_entry(p_hwfn, p_ent); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } @@ -1355,6 +1354,7 @@ qed_filter_ucast_common(struct qed_hwfn *p_hwfn, DP_NOTICE(p_hwfn, "%d is not supported yet\n", p_filter_cmd->opcode); + qed_sp_destroy_request(p_hwfn, *pp_ent); return -EINVAL; } @@ -2056,13 +2056,13 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, } else { rc = qed_fw_vport(p_hwfn, p_params->vport_id, &abs_vport_id); if (rc) - return rc; + goto err; if (p_params->qid != QED_RFS_NTUPLE_QID_RSS) { rc = qed_fw_l2_queue(p_hwfn, p_params->qid, &abs_rx_q_id); if (rc) - return rc; + goto err; p_ramrod->rx_qid_valid = 1; p_ramrod->rx_qid = cpu_to_le16(abs_rx_q_id); @@ -2083,6 +2083,10 @@ qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, (u64)p_params->addr, p_params->length); return qed_spq_post(p_hwfn, p_ent, NULL); + +err: + qed_sp_destroy_request(p_hwfn, p_ent); + return rc; } int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index c71391b9c757..62113438c880 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -1514,6 +1514,7 @@ qed_rdma_register_tid(void *rdma_cxt, default: rc = -EINVAL; DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "rc = %d\n", rc); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } SET_FIELD(p_ramrod->flags1, diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c index f9167d1354bb..e49fada85410 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_roce.c +++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c @@ -745,6 +745,7 @@ static int qed_roce_sp_destroy_qp_responder(struct qed_hwfn *p_hwfn, DP_NOTICE(p_hwfn, "qed destroy responder failed: cannot allocate memory (ramrod). rc = %d\n", rc); + qed_sp_destroy_request(p_hwfn, p_ent); return rc; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h index 04259df8a5c2..3157c0d99441 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h @@ -399,6 +399,17 @@ struct qed_sp_init_data { struct qed_spq_comp_cb *p_comp_data; }; +/** + * @brief Returns a SPQ entry to the pool / frees the entry if allocated. + * Should be called on in error flows after initializing the SPQ entry + * and before posting it. + * + * @param p_hwfn + * @param p_ent + */ +void qed_sp_destroy_request(struct qed_hwfn *p_hwfn, + struct qed_spq_entry *p_ent); + int qed_sp_init_request(struct qed_hwfn *p_hwfn, struct qed_spq_entry **pp_ent, u8 cmd, diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c index e86a1ea23613..888274fa208b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c @@ -47,6 +47,19 @@ #include "qed_sp.h" #include "qed_sriov.h" +void qed_sp_destroy_request(struct qed_hwfn *p_hwfn, + struct qed_spq_entry *p_ent) +{ + /* qed_spq_get_entry() can either get an entry from the free_pool, + * or, if no entries are left, allocate a new entry and add it to + * the unlimited_pending list. + */ + if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) + kfree(p_ent); + else + qed_spq_return_entry(p_hwfn, p_ent); +} + int qed_sp_init_request(struct qed_hwfn *p_hwfn, struct qed_spq_entry **pp_ent, u8 cmd, u8 protocol, struct qed_sp_init_data *p_data) @@ -111,14 +124,7 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn, return 0; err: - /* qed_spq_get_entry() can either get an entry from the free_pool, - * or, if no entries are left, allocate a new entry and add it to - * the unlimited_pending list. - */ - if (p_ent->queue == &p_hwfn->p_spq->unlimited_pending) - kfree(p_ent); - else - qed_spq_return_entry(p_hwfn, p_ent); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index 9b08a9d9e151..ca6290fa0f30 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -101,6 +101,7 @@ static int qed_sp_vf_start(struct qed_hwfn *p_hwfn, struct qed_vf_info *p_vf) default: DP_NOTICE(p_hwfn, "Unknown VF personality %d\n", p_hwfn->hw_info.personality); + qed_sp_destroy_request(p_hwfn, p_ent); return -EINVAL; } From fa5c448d98f0df660bfcad3dd5facc027ef84cd3 Mon Sep 17 00:00:00 2001 From: Sagiv Ozeri Date: Thu, 8 Nov 2018 16:46:11 +0200 Subject: [PATCH 342/726] qed: Fix potential memory corruption A stuck ramrod should be deleted from the completion_pending list, otherwise it will be added again in the future and corrupt the list. Return error value to inform that ramrod is stuck and should be deleted. Signed-off-by: Sagiv Ozeri Signed-off-by: Denis Bolotin Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_spq.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c index c1a81ec0524b..0a9c5bb0fa48 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_spq.c +++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c @@ -142,6 +142,7 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn, DP_INFO(p_hwfn, "Ramrod is stuck, requesting MCP drain\n"); rc = qed_mcp_drain(p_hwfn, p_ptt); + qed_ptt_release(p_hwfn, p_ptt); if (rc) { DP_NOTICE(p_hwfn, "MCP drain failed\n"); goto err; @@ -150,18 +151,15 @@ static int qed_spq_block(struct qed_hwfn *p_hwfn, /* Retry after drain */ rc = __qed_spq_block(p_hwfn, p_ent, p_fw_ret, true); if (!rc) - goto out; + return 0; comp_done = (struct qed_spq_comp_done *)p_ent->comp_cb.cookie; - if (comp_done->done == 1) + if (comp_done->done == 1) { if (p_fw_ret) *p_fw_ret = comp_done->fw_return_code; -out: - qed_ptt_release(p_hwfn, p_ptt); - return 0; - + return 0; + } err: - qed_ptt_release(p_hwfn, p_ptt); DP_NOTICE(p_hwfn, "Ramrod is stuck [CID %08x cmd %02x protocol %02x echo %04x]\n", le32_to_cpu(p_ent->elem.hdr.cid), From 8137b6ef0ce469154e5cf19f8e7fe04d9a72ac5e Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Thu, 8 Nov 2018 11:42:14 -0600 Subject: [PATCH 343/726] net: stmmac: Fix RX packet size > 8191 Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu Signed-off-by: Thor Thayer Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++- drivers/net/ethernet/stmicro/stmmac/descs_com.h | 2 +- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +- drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 2 +- 4 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index b1b305f8f414..272b9ca66314 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -365,7 +365,8 @@ struct dma_features { /* GMAC TX FIFO is 8K, Rx FIFO is 16K */ #define BUF_SIZE_16KiB 16384 -#define BUF_SIZE_8KiB 8192 +/* RX Buffer size must be < 8191 and multiple of 4/8/16 bytes */ +#define BUF_SIZE_8KiB 8188 #define BUF_SIZE_4KiB 4096 #define BUF_SIZE_2KiB 2048 diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index ca9d7e48034c..40d6356a7e73 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -31,7 +31,7 @@ /* Enhanced descriptors */ static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end) { - p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1) + p->des1 |= cpu_to_le32((BUF_SIZE_8KiB << ERDES1_BUFFER2_SIZE_SHIFT) & ERDES1_BUFFER2_SIZE_MASK); diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 77914c89d749..5ef91a790f9d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -262,7 +262,7 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode, int end) { p->des0 |= cpu_to_le32(RDES0_OWN); - p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK); + p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK); if (mode == STMMAC_CHAIN_MODE) ehn_desc_rx_set_on_chain(p); diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index abc3f85270cd..d8c5bc412219 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -140,7 +140,7 @@ static void clean_desc3(void *priv_ptr, struct dma_desc *p) static int set_16kib_bfsize(int mtu) { int ret = 0; - if (unlikely(mtu >= BUF_SIZE_8KiB)) + if (unlikely(mtu > BUF_SIZE_8KiB)) ret = BUF_SIZE_16KiB; return ret; } From 85b18b0237ce9986a81a1b9534b5e2ee116f5504 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 8 Nov 2018 20:38:26 +0100 Subject: [PATCH 344/726] net: smsc95xx: Fix MTU range The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 2d17f3b9bb16..f2d01cb6f958 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1321,6 +1321,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->net->min_mtu = ETH_MIN_MTU; + dev->net->max_mtu = ETH_DATA_LEN; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; pdata->dev = dev; From 1457d8cf7664f34c4ba534c1073821a559a2f6f9 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Wed, 7 Nov 2018 18:01:00 +0100 Subject: [PATCH 345/726] x86/xen: fix pv boot Commit 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") introduced a regression for booting Xen PV guests. Xen PV guests are using __put_user() and __get_user() for accessing the p2m map (physical to machine frame number map) as accesses might fail in case of not populated areas of the map. With above commit using __put_user() and __get_user() for accessing kernel pages is no longer valid. So replace the Xen hack by adding appropriate p2m access functions using the default fixup handler. Fixes: 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by: Juergen Gross Reviewed-by: Andrew Cooper Signed-off-by: Juergen Gross --- arch/x86/include/asm/xen/page.h | 35 +++++++++++++++++++++++++++++---- arch/x86/xen/p2m.c | 3 +-- 2 files changed, 32 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 123e669bf363..790ce08e41f2 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -9,7 +9,7 @@ #include #include -#include +#include #include #include @@ -93,12 +93,39 @@ clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, */ static inline int xen_safe_write_ulong(unsigned long *addr, unsigned long val) { - return __put_user(val, (unsigned long __user *)addr); + int ret = 0; + + asm volatile("1: mov %[val], %[ptr]\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: sub $1, %[ret]\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : [ret] "+r" (ret), [ptr] "=m" (*addr) + : [val] "r" (val)); + + return ret; } -static inline int xen_safe_read_ulong(unsigned long *addr, unsigned long *val) +static inline int xen_safe_read_ulong(const unsigned long *addr, + unsigned long *val) { - return __get_user(*val, (unsigned long __user *)addr); + int ret = 0; + unsigned long rval = ~0ul; + + asm volatile("1: mov %[ptr], %[rval]\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: sub $1, %[ret]\n" + " jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : [ret] "+r" (ret), [rval] "+r" (rval) + : [ptr] "m" (*addr)); + *val = rval; + + return ret; } #ifdef CONFIG_XEN_PV diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index d6d74efd8912..4fe84436d5a7 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -656,8 +656,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) /* * The interface requires atomic updates on p2m elements. - * xen_safe_write_ulong() is using __put_user which does an atomic - * store via asm(). + * xen_safe_write_ulong() is using an atomic store via asm(). */ if (likely(!xen_safe_write_ulong(xen_p2m_addr + pfn, mfn))) return true; From 68a031d22c57b94870ba13513c9d93b8a8119ab2 Mon Sep 17 00:00:00 2001 From: John Garry Date: Mon, 5 Nov 2018 20:35:14 +0800 Subject: [PATCH 346/726] crypto: hisilicon - Fix NULL dereference for same dst and src When the source and destination addresses for the cipher are the same, we will get a NULL dereference from accessing the split destination scatterlist memories, as shown: [ 56.565719] tcrypt: [ 56.565719] testing speed of async ecb(aes) (hisi_sec_aes_ecb) encryption [ 56.574683] tcrypt: test 0 (128 bit key, 16 byte blocks): [ 56.587585] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 56.596361] Mem abort info: [ 56.599151] ESR = 0x96000006 [ 56.602196] Exception class = DABT (current EL), IL = 32 bits [ 56.608105] SET = 0, FnV = 0 [ 56.611149] EA = 0, S1PTW = 0 [ 56.614280] Data abort info: [ 56.617151] ISV = 0, ISS = 0x00000006 [ 56.620976] CM = 0, WnR = 0 [ 56.623930] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 56.630533] [0000000000000000] pgd=0000041fc7e4d003, pud=0000041fcd9bf003, pmd=0000000000000000 [ 56.639224] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 56.644782] Modules linked in: tcrypt(+) [ 56.648695] CPU: 21 PID: 2326 Comm: insmod Tainted: G W 4.19.0-rc6-00001-g3fabfb8-dirty #716 [ 56.658420] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018 [ 56.667537] pstate: 20000005 (nzCv daif -PAN -UAO) [ 56.672322] pc : sec_alg_skcipher_crypto+0x318/0x748 [ 56.677274] lr : sec_alg_skcipher_crypto+0x178/0x748 [ 56.682224] sp : ffff0000118e3840 [ 56.685525] x29: ffff0000118e3840 x28: ffff841fbb3f8118 [ 56.690825] x27: 0000000000000000 x26: 0000000000000000 [ 56.696125] x25: ffff841fbb3f8080 x24: ffff841fbadc0018 [ 56.701425] x23: ffff000009119000 x22: ffff841fbb24e280 [ 56.706724] x21: ffff841ff212e780 x20: ffff841ff212e700 [ 56.712023] x19: 0000000000000001 x18: ffffffffffffffff [ 56.717322] x17: 0000000000000000 x16: 0000000000000000 [ 56.722621] x15: ffff0000091196c8 x14: 72635f7265687069 [ 56.727920] x13: 636b735f676c615f x12: ffff000009119940 [ 56.733219] x11: 0000000000000000 x10: 00000000006080c0 [ 56.738519] x9 : 0000000000000000 x8 : ffff841fbb24e480 [ 56.743818] x7 : ffff841fbb24e500 x6 : ffff841ff00cdcc0 [ 56.749117] x5 : 0000000000000010 x4 : 0000000000000000 [ 56.754416] x3 : ffff841fbb24e380 x2 : ffff841fbb24e480 [ 56.759715] x1 : 0000000000000000 x0 : ffff000008f682c8 [ 56.765016] Process insmod (pid: 2326, stack limit = 0x(____ptrval____)) [ 56.771702] Call trace: [ 56.774136] sec_alg_skcipher_crypto+0x318/0x748 [ 56.778740] sec_alg_skcipher_encrypt+0x10/0x18 [ 56.783259] test_skcipher_speed+0x2a0/0x700 [tcrypt] [ 56.788298] do_test+0x18f8/0x48c8 [tcrypt] [ 56.792469] tcrypt_mod_init+0x60/0x1000 [tcrypt] [ 56.797161] do_one_initcall+0x5c/0x178 [ 56.800985] do_init_module+0x58/0x1b4 [ 56.804721] load_module+0x1da4/0x2150 [ 56.808456] __se_sys_init_module+0x14c/0x1e8 [ 56.812799] __arm64_sys_init_module+0x18/0x20 [ 56.817231] el0_svc_common+0x60/0xe8 [ 56.820880] el0_svc_handler+0x2c/0x80 [ 56.824615] el0_svc+0x8/0xc [ 56.827483] Code: a94c87a3 910b2000 f87b7842 f9004ba2 (b87b7821) [ 56.833564] ---[ end trace 0f63290590e93d94 ]--- Segmentation fault Fix this by only accessing these memories when we have different src and dst. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron Cc: Signed-off-by: John Garry Signed-off-by: Herbert Xu --- drivers/crypto/hisilicon/sec/sec_algs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/crypto/hisilicon/sec/sec_algs.c b/drivers/crypto/hisilicon/sec/sec_algs.c index f7d6d690116e..32c6c02cb9ae 100644 --- a/drivers/crypto/hisilicon/sec/sec_algs.c +++ b/drivers/crypto/hisilicon/sec/sec_algs.c @@ -732,6 +732,7 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, int *splits_in_nents; int *splits_out_nents = NULL; struct sec_request_el *el, *temp; + bool split = skreq->src != skreq->dst; mutex_init(&sec_req->lock); sec_req->req_base = &skreq->base; @@ -750,7 +751,7 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, if (ret) goto err_free_split_sizes; - if (skreq->src != skreq->dst) { + if (split) { sec_req->len_out = sg_nents(skreq->dst); ret = sec_map_and_split_sg(skreq->dst, split_sizes, steps, &splits_out, &splits_out_nents, @@ -785,8 +786,9 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, split_sizes[i], skreq->src != skreq->dst, splits_in[i], splits_in_nents[i], - splits_out[i], - splits_out_nents[i], info); + split ? splits_out[i] : NULL, + split ? splits_out_nents[i] : 0, + info); if (IS_ERR(el)) { ret = PTR_ERR(el); goto err_free_elements; @@ -854,7 +856,7 @@ err_free_elements: crypto_skcipher_ivsize(atfm), DMA_BIDIRECTIONAL); err_unmap_out_sg: - if (skreq->src != skreq->dst) + if (split) sec_unmap_sg_on_err(skreq->dst, steps, splits_out, splits_out_nents, sec_req->len_out, info->dev); From 0b0cf6af3f3151c26c27e8e51def5527091c3e69 Mon Sep 17 00:00:00 2001 From: John Garry Date: Mon, 5 Nov 2018 20:35:15 +0800 Subject: [PATCH 347/726] crypto: hisilicon - Fix reference after free of memories on error path coccicheck currently warns of the following issues in the driver: drivers/crypto/hisilicon/sec/sec_algs.c:864:51-66: ERROR: reference preceded by free on line 812 drivers/crypto/hisilicon/sec/sec_algs.c:864:40-49: ERROR: reference preceded by free on line 813 drivers/crypto/hisilicon/sec/sec_algs.c:861:8-24: ERROR: reference preceded by free on line 814 drivers/crypto/hisilicon/sec/sec_algs.c:860:41-51: ERROR: reference preceded by free on line 815 drivers/crypto/hisilicon/sec/sec_algs.c:867:7-18: ERROR: reference preceded by free on line 816 It would appear than on certain error paths that we may attempt reference- after-free some memories. This patch fixes those issues. The solution doesn't look perfect, but having same memories free'd possibly from separate functions makes it tricky. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron Cc: Signed-off-by: John Garry Signed-off-by: Herbert Xu --- drivers/crypto/hisilicon/sec/sec_algs.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/crypto/hisilicon/sec/sec_algs.c b/drivers/crypto/hisilicon/sec/sec_algs.c index 32c6c02cb9ae..cdc4f9a171d9 100644 --- a/drivers/crypto/hisilicon/sec/sec_algs.c +++ b/drivers/crypto/hisilicon/sec/sec_algs.c @@ -808,13 +808,6 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, * more refined but this is unlikely to happen so no need. */ - /* Cleanup - all elements in pointer arrays have been coppied */ - kfree(splits_in_nents); - kfree(splits_in); - kfree(splits_out_nents); - kfree(splits_out); - kfree(split_sizes); - /* Grab a big lock for a long time to avoid concurrency issues */ mutex_lock(&queue->queuelock); @@ -829,13 +822,13 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, (!queue->havesoftqueue || kfifo_avail(&queue->softqueue) > steps)) || !list_empty(&ctx->backlog)) { + ret = -EBUSY; if ((skreq->base.flags & CRYPTO_TFM_REQ_MAY_BACKLOG)) { list_add_tail(&sec_req->backlog_head, &ctx->backlog); mutex_unlock(&queue->queuelock); - return -EBUSY; + goto out; } - ret = -EBUSY; mutex_unlock(&queue->queuelock); goto err_free_elements; } @@ -844,7 +837,15 @@ static int sec_alg_skcipher_crypto(struct skcipher_request *skreq, if (ret) goto err_free_elements; - return -EINPROGRESS; + ret = -EINPROGRESS; +out: + /* Cleanup - all elements in pointer arrays have been copied */ + kfree(splits_in_nents); + kfree(splits_in); + kfree(splits_out_nents); + kfree(splits_out); + kfree(split_sizes); + return ret; err_free_elements: list_for_each_entry_safe(el, temp, &sec_req->elements, head) { From 508a1c4df085a547187eed346f1bfe5e381797f1 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 8 Nov 2018 23:55:16 +0100 Subject: [PATCH 348/726] crypto: simd - correctly take reqsize of wrapped skcipher into account The simd wrapper's skcipher request context structure consists of a single subrequest whose size is taken from the subordinate skcipher. However, in simd_skcipher_init(), the reqsize that is retrieved is not from the subordinate skcipher but from the cryptd request structure, whose size is completely unrelated to the actual wrapped skcipher. Reported-by: Qian Cai Signed-off-by: Ard Biesheuvel Tested-by: Qian Cai Signed-off-by: Herbert Xu --- crypto/simd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/crypto/simd.c b/crypto/simd.c index ea7240be3001..78e8d037ae2b 100644 --- a/crypto/simd.c +++ b/crypto/simd.c @@ -124,8 +124,9 @@ static int simd_skcipher_init(struct crypto_skcipher *tfm) ctx->cryptd_tfm = cryptd_tfm; - reqsize = sizeof(struct skcipher_request); - reqsize += crypto_skcipher_reqsize(&cryptd_tfm->base); + reqsize = crypto_skcipher_reqsize(cryptd_skcipher_child(cryptd_tfm)); + reqsize = max(reqsize, crypto_skcipher_reqsize(&cryptd_tfm->base)); + reqsize += sizeof(struct skcipher_request); crypto_skcipher_set_reqsize(tfm, reqsize); From f43f39958beb206b53292801e216d9b8a660f087 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sat, 3 Nov 2018 14:56:00 -0700 Subject: [PATCH 349/726] crypto: user - fix leaking uninitialized memory to userspace All bytes of the NETLINK_CRYPTO report structures must be initialized, since they are copied to userspace. The change from strncpy() to strlcpy() broke this. As a minimal fix, change it back. Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion") Cc: # v4.12+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu --- crypto/crypto_user_base.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/crypto/crypto_user_base.c b/crypto/crypto_user_base.c index e41f6cc33fff..784748dbb19f 100644 --- a/crypto/crypto_user_base.c +++ b/crypto/crypto_user_base.c @@ -84,7 +84,7 @@ static int crypto_report_cipher(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_cipher rcipher; - strlcpy(rcipher.type, "cipher", sizeof(rcipher.type)); + strncpy(rcipher.type, "cipher", sizeof(rcipher.type)); rcipher.blocksize = alg->cra_blocksize; rcipher.min_keysize = alg->cra_cipher.cia_min_keysize; @@ -103,7 +103,7 @@ static int crypto_report_comp(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_comp rcomp; - strlcpy(rcomp.type, "compression", sizeof(rcomp.type)); + strncpy(rcomp.type, "compression", sizeof(rcomp.type)); if (nla_put(skb, CRYPTOCFGA_REPORT_COMPRESS, sizeof(struct crypto_report_comp), &rcomp)) goto nla_put_failure; @@ -117,7 +117,7 @@ static int crypto_report_acomp(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_acomp racomp; - strlcpy(racomp.type, "acomp", sizeof(racomp.type)); + strncpy(racomp.type, "acomp", sizeof(racomp.type)); if (nla_put(skb, CRYPTOCFGA_REPORT_ACOMP, sizeof(struct crypto_report_acomp), &racomp)) @@ -132,7 +132,7 @@ static int crypto_report_akcipher(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_akcipher rakcipher; - strlcpy(rakcipher.type, "akcipher", sizeof(rakcipher.type)); + strncpy(rakcipher.type, "akcipher", sizeof(rakcipher.type)); if (nla_put(skb, CRYPTOCFGA_REPORT_AKCIPHER, sizeof(struct crypto_report_akcipher), &rakcipher)) @@ -147,7 +147,7 @@ static int crypto_report_kpp(struct sk_buff *skb, struct crypto_alg *alg) { struct crypto_report_kpp rkpp; - strlcpy(rkpp.type, "kpp", sizeof(rkpp.type)); + strncpy(rkpp.type, "kpp", sizeof(rkpp.type)); if (nla_put(skb, CRYPTOCFGA_REPORT_KPP, sizeof(struct crypto_report_kpp), &rkpp)) @@ -161,10 +161,10 @@ nla_put_failure: static int crypto_report_one(struct crypto_alg *alg, struct crypto_user_alg *ualg, struct sk_buff *skb) { - strlcpy(ualg->cru_name, alg->cra_name, sizeof(ualg->cru_name)); - strlcpy(ualg->cru_driver_name, alg->cra_driver_name, + strncpy(ualg->cru_name, alg->cra_name, sizeof(ualg->cru_name)); + strncpy(ualg->cru_driver_name, alg->cra_driver_name, sizeof(ualg->cru_driver_name)); - strlcpy(ualg->cru_module_name, module_name(alg->cra_module), + strncpy(ualg->cru_module_name, module_name(alg->cra_module), sizeof(ualg->cru_module_name)); ualg->cru_type = 0; @@ -177,7 +177,7 @@ static int crypto_report_one(struct crypto_alg *alg, if (alg->cra_flags & CRYPTO_ALG_LARVAL) { struct crypto_report_larval rl; - strlcpy(rl.type, "larval", sizeof(rl.type)); + strncpy(rl.type, "larval", sizeof(rl.type)); if (nla_put(skb, CRYPTOCFGA_REPORT_LARVAL, sizeof(struct crypto_report_larval), &rl)) goto nla_put_failure; From 9f4debe38415583086ce814798eeb864aeb39551 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Sat, 3 Nov 2018 14:56:01 -0700 Subject: [PATCH 350/726] crypto: user - Zeroize whole structure given to user space For preventing uninitialized data to be given to user-space (and so leak potential useful data), the crypto_stat structure must be correctly initialized. Reported-by: Dan Carpenter Fixes: cac5818c25d0 ("crypto: user - Implement a generic crypto statistics") Signed-off-by: Corentin Labbe [EB: also fix it in crypto_reportstat_one()] [EB: use sizeof(var) rather than sizeof(type)] Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu --- crypto/crypto_user_stat.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/crypto/crypto_user_stat.c b/crypto/crypto_user_stat.c index 021ad06bbb62..1dfaa0ccd555 100644 --- a/crypto/crypto_user_stat.c +++ b/crypto/crypto_user_stat.c @@ -37,6 +37,8 @@ static int crypto_report_aead(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&raead, 0, sizeof(raead)); + strncpy(raead.type, "aead", sizeof(raead.type)); v32 = atomic_read(&alg->encrypt_cnt); @@ -65,6 +67,8 @@ static int crypto_report_cipher(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rcipher, 0, sizeof(rcipher)); + strlcpy(rcipher.type, "cipher", sizeof(rcipher.type)); v32 = atomic_read(&alg->encrypt_cnt); @@ -93,6 +97,8 @@ static int crypto_report_comp(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rcomp, 0, sizeof(rcomp)); + strlcpy(rcomp.type, "compression", sizeof(rcomp.type)); v32 = atomic_read(&alg->compress_cnt); rcomp.stat_compress_cnt = v32; @@ -120,6 +126,8 @@ static int crypto_report_acomp(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&racomp, 0, sizeof(racomp)); + strlcpy(racomp.type, "acomp", sizeof(racomp.type)); v32 = atomic_read(&alg->compress_cnt); racomp.stat_compress_cnt = v32; @@ -147,6 +155,8 @@ static int crypto_report_akcipher(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rakcipher, 0, sizeof(rakcipher)); + strncpy(rakcipher.type, "akcipher", sizeof(rakcipher.type)); v32 = atomic_read(&alg->encrypt_cnt); rakcipher.stat_encrypt_cnt = v32; @@ -177,6 +187,8 @@ static int crypto_report_kpp(struct sk_buff *skb, struct crypto_alg *alg) struct crypto_stat rkpp; u32 v; + memset(&rkpp, 0, sizeof(rkpp)); + strlcpy(rkpp.type, "kpp", sizeof(rkpp.type)); v = atomic_read(&alg->setsecret_cnt); @@ -203,6 +215,8 @@ static int crypto_report_ahash(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rhash, 0, sizeof(rhash)); + strncpy(rhash.type, "ahash", sizeof(rhash.type)); v32 = atomic_read(&alg->hash_cnt); @@ -227,6 +241,8 @@ static int crypto_report_shash(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rhash, 0, sizeof(rhash)); + strncpy(rhash.type, "shash", sizeof(rhash.type)); v32 = atomic_read(&alg->hash_cnt); @@ -251,6 +267,8 @@ static int crypto_report_rng(struct sk_buff *skb, struct crypto_alg *alg) u64 v64; u32 v32; + memset(&rrng, 0, sizeof(rrng)); + strncpy(rrng.type, "rng", sizeof(rrng.type)); v32 = atomic_read(&alg->generate_cnt); @@ -275,6 +293,8 @@ static int crypto_reportstat_one(struct crypto_alg *alg, struct crypto_user_alg *ualg, struct sk_buff *skb) { + memset(ualg, 0, sizeof(*ualg)); + strlcpy(ualg->cru_name, alg->cra_name, sizeof(ualg->cru_name)); strlcpy(ualg->cru_driver_name, alg->cra_driver_name, sizeof(ualg->cru_driver_name)); @@ -291,6 +311,7 @@ static int crypto_reportstat_one(struct crypto_alg *alg, if (alg->cra_flags & CRYPTO_ALG_LARVAL) { struct crypto_stat rl; + memset(&rl, 0, sizeof(rl)); strlcpy(rl.type, "larval", sizeof(rl.type)); if (nla_put(skb, CRYPTOCFGA_STAT_LARVAL, sizeof(struct crypto_stat), &rl)) From a05a14049999598a3bb6fab12db6b768a0215522 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 2 Nov 2018 15:39:43 +0200 Subject: [PATCH 351/726] gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path The change corrects the error path in gpiochip_add_data_with_key() by avoiding to call ida_simple_remove(), if ida_simple_get() returns an error. Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument is negative, it allows to easily check the correctness of the fix by fuzzing the return value from ida_simple_get(). Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Vladimir Zapolskiy Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 230e41562462..a2cbb474901c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1295,7 +1295,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, gdev->descs = kcalloc(chip->ngpio, sizeof(gdev->descs[0]), GFP_KERNEL); if (!gdev->descs) { status = -ENOMEM; - goto err_free_gdev; + goto err_free_ida; } if (chip->ngpio == 0) { @@ -1427,8 +1427,9 @@ err_free_label: kfree_const(gdev->label); err_free_descs: kfree(gdev->descs); -err_free_gdev: +err_free_ida: ida_simple_remove(&gpio_ida, gdev->id); +err_free_gdev: /* failures here can mean systems won't boot... */ pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__, gdev->base, gdev->base + gdev->ngpio - 1, From 595b0674ce781e38522097b18718ce3c3bffc1a1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 5 Nov 2018 18:33:34 +0200 Subject: [PATCH 352/726] MAINTAINERS: Add tree link for Intel pin control driver Intel pin control driver gets its own tree. Update MAINTAINERS accordingly. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f4855974f325..570a8c593b52 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11730,6 +11730,7 @@ F: Documentation/devicetree/bindings/pinctrl/fsl,* PIN CONTROLLER - INTEL M: Mika Westerberg M: Andy Shevchenko +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git S: Maintained F: drivers/pinctrl/intel/ From 10283ea525d30f2e99828978fd04d8427876a7ad Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 5 Nov 2018 22:57:24 +0000 Subject: [PATCH 353/726] gfs2: Put bitmap buffers in put_super gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Andreas Gruenbacher --- fs/gfs2/rgrp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index ffe3032b1043..b08a530433ad 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -733,6 +733,7 @@ void gfs2_clear_rgrpd(struct gfs2_sbd *sdp) if (gl) { glock_clear_object(gl, rgd); + gfs2_rgrp_brelse(rgd); gfs2_glock_put(gl); } @@ -1174,7 +1175,7 @@ static u32 count_unlinked(struct gfs2_rgrpd *rgd) * @rgd: the struct gfs2_rgrpd describing the RG to read in * * Read in all of a Resource Group's header and bitmap blocks. - * Caller must eventually call gfs2_rgrp_relse() to free the bitmaps. + * Caller must eventually call gfs2_rgrp_brelse() to free the bitmaps. * * Returns: errno */ From e7445ceddfc220c1aede6d42758a5acb8844e9c3 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Thu, 8 Nov 2018 20:14:29 +0000 Subject: [PATCH 354/726] gfs2: Fix metadata read-ahead during truncate (2) The previous attempt to fix for metadata read-ahead during truncate was incorrect: for files with a height > 2 (1006989312 bytes with a block size of 4096 bytes), read-ahead requests were not being issued for some of the indirect blocks discovered while walking the metadata tree, leading to significant slow-downs when deleting large files. Fix that. In addition, only issue read-ahead requests in the first pass through the meta-data tree, while deallocating data blocks. Fixes: c3ce5aa9b0 ("gfs2: Fix metadata read-ahead during truncate") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Andreas Gruenbacher --- fs/gfs2/bmap.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 5f3ea07ef5e2..38d88fcb6988 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1908,10 +1908,16 @@ static int punch_hole(struct gfs2_inode *ip, u64 offset, u64 length) if (ret < 0) goto out; - /* issue read-ahead on metadata */ - if (mp.mp_aheight > 1) { - for (; ret > 1; ret--) { - metapointer_range(&mp, mp.mp_aheight - ret, + /* On the first pass, issue read-ahead on metadata. */ + if (mp.mp_aheight > 1 && strip_h == ip->i_height - 1) { + unsigned int height = mp.mp_aheight - 1; + + /* No read-ahead for data blocks. */ + if (mp.mp_aheight - 1 == strip_h) + height--; + + for (; height >= mp.mp_aheight - ret; height--) { + metapointer_range(&mp, height, start_list, start_aligned, end_list, end_aligned, &start, &end); From 65766ee0bf7fe8b3be80e2e1c3ef54ad59b29476 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 9 Nov 2018 11:59:45 +0100 Subject: [PATCH 355/726] ALSA: oss: Use kvzalloc() for local buffer allocations PCM OSS layer may allocate a few temporary buffers, one for the core read/write and another for the conversions via plugins. Currently both are allocated via vmalloc(). But as the allocation size is equivalent with the PCM period size, the required size might be quite small, depending on the application. This patch replaces these vmalloc() calls with kvzalloc() for covering small period sizes better. Also, we use "z"-alloc variant here for addressing the possible uninitialized access reported by syzkaller. Reported-by: syzbot+1cb36954e127c98dd037@syzkaller.appspotmail.com Cc: Signed-off-by: Takashi Iwai --- sound/core/oss/pcm_oss.c | 6 +++--- sound/core/oss/pcm_plugin.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index f8d4a419f3af..467039b342b5 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1062,8 +1062,8 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream) runtime->oss.channels = params_channels(params); runtime->oss.rate = params_rate(params); - vfree(runtime->oss.buffer); - runtime->oss.buffer = vmalloc(runtime->oss.period_bytes); + kvfree(runtime->oss.buffer); + runtime->oss.buffer = kvzalloc(runtime->oss.period_bytes, GFP_KERNEL); if (!runtime->oss.buffer) { err = -ENOMEM; goto failure; @@ -2328,7 +2328,7 @@ static void snd_pcm_oss_release_substream(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime; runtime = substream->runtime; - vfree(runtime->oss.buffer); + kvfree(runtime->oss.buffer); runtime->oss.buffer = NULL; #ifdef CONFIG_SND_PCM_OSS_PLUGINS snd_pcm_oss_plugin_clear(substream); diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c index 141c5f3a9575..31cb2acf8afc 100644 --- a/sound/core/oss/pcm_plugin.c +++ b/sound/core/oss/pcm_plugin.c @@ -66,8 +66,8 @@ static int snd_pcm_plugin_alloc(struct snd_pcm_plugin *plugin, snd_pcm_uframes_t return -ENXIO; size /= 8; if (plugin->buf_frames < frames) { - vfree(plugin->buf); - plugin->buf = vmalloc(size); + kvfree(plugin->buf); + plugin->buf = kvzalloc(size, GFP_KERNEL); plugin->buf_frames = frames; } if (!plugin->buf) { @@ -191,7 +191,7 @@ int snd_pcm_plugin_free(struct snd_pcm_plugin *plugin) if (plugin->private_free) plugin->private_free(plugin); kfree(plugin->buf_channels); - vfree(plugin->buf); + kvfree(plugin->buf); kfree(plugin); return 0; } From 21d3bbdd4c342f16eac8d70893e45cdfa3381a1e Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 2 Nov 2018 16:12:21 -0700 Subject: [PATCH 356/726] nvmet: don't try to add ns to p2p map unless it actually uses it Even without CONFIG_P2PDMA this results in a error print: nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0 Fixes: c6925093d0b2 ("nvmet: Optionally use PCI P2P memory") Signed-off-by: Sagi Grimberg Reviewed-by: Logan Gunthorpe Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index f4efe289dc7b..a5f9bbce863f 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -420,7 +420,7 @@ static void nvmet_p2pmem_ns_add_p2p(struct nvmet_ctrl *ctrl, struct pci_dev *p2p_dev; int ret; - if (!ctrl->p2p_client) + if (!ctrl->p2p_client || !ns->use_p2pmem) return; if (ns->p2p_dev) { From 8f676b8508c250bbe255096522fdefb73f1ea0b9 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 2 Nov 2018 11:22:13 -0700 Subject: [PATCH 357/726] nvme: make sure ns head inherits underlying device limits Whenever we update ns_head info, we need to make sure it is still compatible with all underlying backing devices because although nvme multipath doesn't have any explicit use of these limits, other devices can still be stacked on top of it which may rely on the underlying limits. Start with unlimited stacking limits, and every info update iterate over siblings and adjust queue limits. Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 4 +++- drivers/nvme/host/multipath.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 2e65be8b1387..559d567693b8 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1519,8 +1519,10 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->ndev) nvme_nvm_update_nvm_info(ns); #ifdef CONFIG_NVME_MULTIPATH - if (ns->head->disk) + if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); + blk_queue_stack_limits(ns->head->disk->queue, ns->queue); + } #endif } diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 5e3cc8c59a39..9901afd804ce 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -285,6 +285,7 @@ int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl, struct nvme_ns_head *head) blk_queue_flag_set(QUEUE_FLAG_NONROT, q); /* set to a default value for 512 until disk is validated */ blk_queue_logical_block_size(q, 512); + blk_set_stacking_limits(&q->limits); /* we need to propagate up the VMC settings */ if (ctrl->vwc & NVME_CTRL_VWC_PRESENT) From d39aa4979219ca3d61c492f7460f1032b97b9ef2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 7 Nov 2018 09:20:25 +0100 Subject: [PATCH 358/726] Revert "nvmet-rdma: use a private workqueue for delete" This reverts commit 2acf70ade79d26b97611a8df52eb22aa33814cd4. The commit never really fixed the intended issue and caused all kinds of other issues, including a use before initialization. Suggested-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/target/rdma.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index ddce100be57a..3f7971d3706d 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -122,7 +122,6 @@ struct nvmet_rdma_device { int inline_page_count; }; -static struct workqueue_struct *nvmet_rdma_delete_wq; static bool nvmet_rdma_use_srq; module_param_named(use_srq, nvmet_rdma_use_srq, bool, 0444); MODULE_PARM_DESC(use_srq, "Use shared receive queue."); @@ -1274,12 +1273,12 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id, if (queue->host_qid == 0) { /* Let inflight controller teardown complete */ - flush_workqueue(nvmet_rdma_delete_wq); + flush_scheduled_work(); } ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn); if (ret) { - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); /* Destroying rdma_cm id is not needed here */ return 0; } @@ -1344,7 +1343,7 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue) if (disconnect) { rdma_disconnect(queue->cm_id); - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); } } @@ -1374,7 +1373,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id, mutex_unlock(&nvmet_rdma_queue_mutex); pr_err("failed to connect queue %d\n", queue->idx); - queue_work(nvmet_rdma_delete_wq, &queue->release_work); + schedule_work(&queue->release_work); } /** @@ -1656,17 +1655,8 @@ static int __init nvmet_rdma_init(void) if (ret) goto err_ib_client; - nvmet_rdma_delete_wq = alloc_workqueue("nvmet-rdma-delete-wq", - WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0); - if (!nvmet_rdma_delete_wq) { - ret = -ENOMEM; - goto err_unreg_transport; - } - return 0; -err_unreg_transport: - nvmet_unregister_transport(&nvmet_rdma_ops); err_ib_client: ib_unregister_client(&nvmet_rdma_ib_client); return ret; @@ -1674,7 +1664,6 @@ err_ib_client: static void __exit nvmet_rdma_exit(void) { - destroy_workqueue(nvmet_rdma_delete_wq); nvmet_unregister_transport(&nvmet_rdma_ops); ib_unregister_client(&nvmet_rdma_ib_client); WARN_ON_ONCE(!list_empty(&nvmet_rdma_queue_list)); From 1adfc5e4136f5967d591c399aff95b3b035f16b7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 29 Oct 2018 20:57:17 +0800 Subject: [PATCH 359/726] block: make sure discard bio is aligned with logical block size Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer Cc: Christoph Hellwig Cc: Xiao Ni Cc: Mariusz Dabrowski Fixes: 744889b7cbb56a6 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks") Reported-by: Rui Salvaterra Tested-by: Rui Salvaterra Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-lib.c | 3 +-- block/blk-merge.c | 3 ++- block/blk.h | 10 ++++++++++ 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 76f867ea9a9b..d56fd159d2e8 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -57,8 +57,7 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (!req_sects) goto fail; - if (req_sects > UINT_MAX >> 9) - req_sects = UINT_MAX >> 9; + req_sects = min(req_sects, bio_allowed_max_sectors(q)); end_sect = sector + req_sects; diff --git a/block/blk-merge.c b/block/blk-merge.c index 208658a901c6..e7696c47489a 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -90,7 +90,8 @@ static struct bio *blk_bio_discard_split(struct request_queue *q, /* Zero-sector (unknown) and one-sector granularities are the same. */ granularity = max(q->limits.discard_granularity >> 9, 1U); - max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); + max_discard_sectors = min(q->limits.max_discard_sectors, + bio_allowed_max_sectors(q)); max_discard_sectors -= max_discard_sectors % granularity; if (unlikely(!max_discard_sectors)) { diff --git a/block/blk.h b/block/blk.h index c85e53f21cdd..0089fefdf771 100644 --- a/block/blk.h +++ b/block/blk.h @@ -395,6 +395,16 @@ static inline unsigned long blk_rq_deadline(struct request *rq) return rq->__deadline & ~0x1UL; } +/* + * The max size one bio can handle is UINT_MAX becasue bvec_iter.bi_size + * is defined as 'unsigned int', meantime it has to aligned to with logical + * block size which is the minimum accepted unit by hardware. + */ +static inline unsigned int bio_allowed_max_sectors(struct request_queue *q) +{ + return round_down(UINT_MAX, queue_logical_block_size(q)) >> 9; +} + /* * Internal io_context interface */ From ba5d73851e71847ba7f7f4c27a1a6e1f5ab91c79 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 29 Oct 2018 20:57:18 +0800 Subject: [PATCH 360/726] block: cleanup __blkdev_issue_discard() Cleanup __blkdev_issue_discard() a bit: - remove local variable of 'end_sect' - remove code block of 'fail' Cc: Mike Snitzer Cc: Christoph Hellwig Cc: Xiao Ni Cc: Mariusz Dabrowski Tested-by: Rui Salvaterra Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-lib.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index d56fd159d2e8..d58d5d87dd88 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -51,15 +51,12 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, if ((sector | nr_sects) & bs_mask) return -EINVAL; + if (!nr_sects) + return -EINVAL; + while (nr_sects) { - unsigned int req_sects = nr_sects; - sector_t end_sect; - - if (!req_sects) - goto fail; - req_sects = min(req_sects, bio_allowed_max_sectors(q)); - - end_sect = sector + req_sects; + unsigned int req_sects = min_t(unsigned int, nr_sects, + bio_allowed_max_sectors(q)); bio = blk_next_bio(bio, 0, gfp_mask); bio->bi_iter.bi_sector = sector; @@ -67,8 +64,8 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, bio_set_op_attrs(bio, op, 0); bio->bi_iter.bi_size = req_sects << 9; + sector += req_sects; nr_sects -= req_sects; - sector = end_sect; /* * We can loop for a long time in here, if someone does @@ -81,14 +78,6 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, *biop = bio; return 0; - -fail: - if (bio) { - submit_bio_wait(bio); - bio_put(bio); - } - *biop = NULL; - return -EOPNOTSUPP; } EXPORT_SYMBOL(__blkdev_issue_discard); From 34ffec60b27aa81d04e274e71e4c6ef740f75fc7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 29 Oct 2018 20:57:19 +0800 Subject: [PATCH 361/726] block: make sure writesame bio is aligned with logical block size Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer Cc: Christoph Hellwig Cc: Xiao Ni Cc: Mariusz Dabrowski Fixes: b49a0871be31a745b2ef ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by: Rui Salvaterra Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index d58d5d87dd88..e8b3bb9bf375 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -149,7 +149,7 @@ static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector, return -EOPNOTSUPP; /* Ensure that max_write_same_sectors doesn't overflow bi_size */ - max_write_same_sectors = UINT_MAX >> 9; + max_write_same_sectors = bio_allowed_max_sectors(q); while (nr_sects) { bio = blk_next_bio(bio, 1, gfp_mask); From 7fabaf303458fcabb694999d6fa772cc13d4e217 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 9 Nov 2018 15:52:16 +0100 Subject: [PATCH 362/726] fuse: fix leaked notify reply fuse_request_send_notify_reply() may fail if the connection was reset for some reason (e.g. fs was unmounted). Don't leak request reference in this case. Besides leaking memory, this resulted in fc->num_waiting not being decremented and hence fuse_wait_aborted() left in a hanging and unkillable state. Fixes: 2d45ba381a74 ("fuse: add retrieve request") Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi Cc: #v2.6.36 --- fs/fuse/dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index ae813e609932..6fe330cc9709 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1768,8 +1768,10 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, req->in.args[1].size = total_len; err = fuse_request_send_notify_reply(fc, req, outarg->notify_unique); - if (err) + if (err) { fuse_retrieve_end(fc, req); + fuse_put_request(fc, req); + } return err; } From 2d84a2d19b6150c6dbac1e6ebad9c82e4c123772 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 9 Nov 2018 15:52:16 +0100 Subject: [PATCH 363/726] fuse: fix possibly missed wake-up after abort In current fuse_drop_waiting() implementation it's possible that fuse_wait_aborted() will not be woken up in the unlikely case that fuse_abort_conn() + fuse_wait_aborted() runs in between checking fc->connected and calling atomic_dec(&fc->num_waiting). Do the atomic_dec_and_test() unconditionally, which also provides the necessary barrier against reordering with the fc->connected check. The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE barrier after resetting fc->connected. However, this is not a performance sensitive path, and adding the explicit barrier makes it easier to document. Signed-off-by: Miklos Szeredi Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Cc: #v4.19 --- fs/fuse/dev.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 6fe330cc9709..a5e516a40e7a 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -165,9 +165,13 @@ static bool fuse_block_alloc(struct fuse_conn *fc, bool for_background) static void fuse_drop_waiting(struct fuse_conn *fc) { - if (fc->connected) { - atomic_dec(&fc->num_waiting); - } else if (atomic_dec_and_test(&fc->num_waiting)) { + /* + * lockess check of fc->connected is okay, because atomic_dec_and_test() + * provides a memory barrier mached with the one in fuse_wait_aborted() + * to ensure no wake-up is missed. + */ + if (atomic_dec_and_test(&fc->num_waiting) && + !READ_ONCE(fc->connected)) { /* wake up aborters */ wake_up_all(&fc->blocked_waitq); } @@ -2221,6 +2225,8 @@ EXPORT_SYMBOL_GPL(fuse_abort_conn); void fuse_wait_aborted(struct fuse_conn *fc) { + /* matches implicit memory barrier in fuse_drop_waiting() */ + smp_mb(); wait_event(fc->blocked_waitq, atomic_read(&fc->num_waiting) == 0); } From ebacb81273599555a7a19f7754a1451206a5fc4f Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Fri, 9 Nov 2018 14:51:46 +0100 Subject: [PATCH 364/726] fuse: fix use-after-free in fuse_direct_IO() In async IO blocking case the additional reference to the io is taken for it to survive fuse_aio_complete(). In non blocking case this additional reference is not needed, however we still reference io to figure out whether to wait for completion or not. This is wrong and will lead to use-after-free. Fix it by storing blocking information in separate variable. This was spotted by KASAN when running generic/208 fstest. Signed-off-by: Lukas Czerner Reported-by: Zorro Lang Signed-off-by: Miklos Szeredi Fixes: 744742d692e3 ("fuse: Add reference counting for fuse_io_priv") Cc: # v4.6 --- fs/fuse/file.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index cc2121b37bf5..b52f9baaa3e7 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2924,10 +2924,12 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter) } if (io->async) { + bool blocking = io->blocking; + fuse_aio_complete(io, ret < 0 ? ret : 0, -1); /* we have a non-extending, async request, so return */ - if (!io->blocking) + if (!blocking) return -EIOCBQUEUED; wait_for_completion(&wait); From d3132b3860f6cf35ff7609a76bbcdbb814bd027c Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 8 Nov 2018 08:35:06 +0100 Subject: [PATCH 365/726] xen: fix xen_qlock_wait() Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable") introduced a regression for Xen guests running fully virtualized (HVM or PVH mode). The Xen hypervisor wouldn't return from the poll hypercall with interrupts disabled in case of an interrupt (for PV guests it does). So instead of disabling interrupts in xen_qlock_wait() use a nesting counter to avoid calling xen_clear_irq_pending() in case xen_qlock_wait() is nested. Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable") Cc: stable@vger.kernel.org Reported-by: Sander Eikelenboom Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Tested-by: Sander Eikelenboom Signed-off-by: Juergen Gross --- arch/x86/xen/spinlock.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index 441c88262169..1c8a8816a402 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -21,6 +22,7 @@ static DEFINE_PER_CPU(int, lock_kicker_irq) = -1; static DEFINE_PER_CPU(char *, irq_name); +static DEFINE_PER_CPU(atomic_t, xen_qlock_wait_nest); static bool xen_pvspin = true; static void xen_qlock_kick(int cpu) @@ -39,25 +41,25 @@ static void xen_qlock_kick(int cpu) */ static void xen_qlock_wait(u8 *byte, u8 val) { - unsigned long flags; int irq = __this_cpu_read(lock_kicker_irq); + atomic_t *nest_cnt = this_cpu_ptr(&xen_qlock_wait_nest); /* If kicker interrupts not initialized yet, just spin */ if (irq == -1 || in_nmi()) return; - /* Guard against reentry. */ - local_irq_save(flags); + /* Detect reentry. */ + atomic_inc(nest_cnt); - /* If irq pending already clear it. */ - if (xen_test_irq_pending(irq)) { + /* If irq pending already and no nested call clear it. */ + if (atomic_read(nest_cnt) == 1 && xen_test_irq_pending(irq)) { xen_clear_irq_pending(irq); } else if (READ_ONCE(*byte) == val) { /* Block until irq becomes pending (or a spurious wakeup) */ xen_poll_irq(irq); } - local_irq_restore(flags); + atomic_dec(nest_cnt); } static irqreturn_t dummy_handler(int irq, void *dev_id) From 3941552aec1e04d63999988a057ae09a1c56ebeb Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 1 Nov 2018 13:33:07 +0100 Subject: [PATCH 366/726] xen: remove size limit of privcmd-buf mapping interface Currently the size of hypercall buffers allocated via /dev/xen/hypercall is limited to a default of 64 memory pages. For live migration of guests this might be too small as the page dirty bitmask needs to be sized according to the size of the guest. This means migrating a 8GB sized guest is already exhausting the default buffer size for the dirty bitmap. There is no sensible way to set a sane limit, so just remove it completely. The device node's usage is limited to root anyway, so there is no additional DOS scenario added by allowing unlimited buffers. While at it make the error path for the -ENOMEM case a little bit cleaner by setting n_pages to the number of successfully allocated pages instead of the target size. Fixes: c51b3c639e01f2 ("xen: add new hypercall buffer mapping device") Cc: #4.18 Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- drivers/xen/privcmd-buf.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/xen/privcmd-buf.c b/drivers/xen/privcmd-buf.c index df1ed37c3269..de01a6d0059d 100644 --- a/drivers/xen/privcmd-buf.c +++ b/drivers/xen/privcmd-buf.c @@ -21,15 +21,9 @@ MODULE_LICENSE("GPL"); -static unsigned int limit = 64; -module_param(limit, uint, 0644); -MODULE_PARM_DESC(limit, "Maximum number of pages that may be allocated by " - "the privcmd-buf device per open file"); - struct privcmd_buf_private { struct mutex lock; struct list_head list; - unsigned int allocated; }; struct privcmd_buf_vma_private { @@ -60,13 +54,10 @@ static void privcmd_buf_vmapriv_free(struct privcmd_buf_vma_private *vma_priv) { unsigned int i; - vma_priv->file_priv->allocated -= vma_priv->n_pages; - list_del(&vma_priv->list); for (i = 0; i < vma_priv->n_pages; i++) - if (vma_priv->pages[i]) - __free_page(vma_priv->pages[i]); + __free_page(vma_priv->pages[i]); kfree(vma_priv); } @@ -146,8 +137,7 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma) unsigned int i; int ret = 0; - if (!(vma->vm_flags & VM_SHARED) || count > limit || - file_priv->allocated + count > limit) + if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; vma_priv = kzalloc(sizeof(*vma_priv) + count * sizeof(void *), @@ -155,19 +145,15 @@ static int privcmd_buf_mmap(struct file *file, struct vm_area_struct *vma) if (!vma_priv) return -ENOMEM; - vma_priv->n_pages = count; - count = 0; - for (i = 0; i < vma_priv->n_pages; i++) { + for (i = 0; i < count; i++) { vma_priv->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); if (!vma_priv->pages[i]) break; - count++; + vma_priv->n_pages++; } mutex_lock(&file_priv->lock); - file_priv->allocated += count; - vma_priv->file_priv = file_priv; vma_priv->users = 1; From a43608fa77213ad5ac5f75994254b9f65d57cfa0 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 24 Oct 2018 10:27:12 +0200 Subject: [PATCH 367/726] can: raw: check for CAN FD capable netdev in raw_sendmsg() When the socket is CAN FD enabled it can handle CAN FD frame transmissions. Add an additional check in raw_sendmsg() as a CAN2.0 CAN driver (non CAN FD) should never see a CAN FD frame. Due to the commonly used can_dropped_invalid_skb() function the CAN 2.0 driver would drop that CAN FD frame anyway - but with this patch the user gets a proper -EINVAL return code. Signed-off-by: Oliver Hartkopp Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- net/can/raw.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/net/can/raw.c b/net/can/raw.c index 1051eee82581..3aab7664933f 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -745,18 +745,19 @@ static int raw_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) } else ifindex = ro->ifindex; - if (ro->fd_frames) { - if (unlikely(size != CANFD_MTU && size != CAN_MTU)) - return -EINVAL; - } else { - if (unlikely(size != CAN_MTU)) - return -EINVAL; - } - dev = dev_get_by_index(sock_net(sk), ifindex); if (!dev) return -ENXIO; + err = -EINVAL; + if (ro->fd_frames && dev->mtu == CANFD_MTU) { + if (unlikely(size != CANFD_MTU && size != CAN_MTU)) + goto put_dev; + } else { + if (unlikely(size != CAN_MTU)) + goto put_dev; + } + skb = sock_alloc_send_skb(sk, size + sizeof(struct can_skb_priv), msg->msg_flags & MSG_DONTWAIT, &err); if (!skb) From 95217260649aa504eb5d4a0d50959ca4e67c8f96 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Mon, 6 Aug 2018 15:14:50 +0200 Subject: [PATCH 368/726] can: kvaser_usb: Fix potential uninitialized variable use If alloc_can_err_skb() fails, cf is never initialized. Move assignment of cf inside check. Reported-by: Dan Carpenter Signed-off-by: Jimmy Assarsson Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index c084bae5ec0a..5fc0be564274 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -1019,6 +1019,11 @@ kvaser_usb_hydra_error_frame(struct kvaser_usb_net_priv *priv, new_state : CAN_STATE_ERROR_ACTIVE; can_change_state(netdev, cf, tx_state, rx_state); + + if (priv->can.restart_ms && + old_state >= CAN_STATE_BUS_OFF && + new_state < CAN_STATE_BUS_OFF) + cf->can_id |= CAN_ERR_RESTARTED; } if (new_state == CAN_STATE_BUS_OFF) { @@ -1028,11 +1033,6 @@ kvaser_usb_hydra_error_frame(struct kvaser_usb_net_priv *priv, can_bus_off(netdev); } - - if (priv->can.restart_ms && - old_state >= CAN_STATE_BUS_OFF && - new_state < CAN_STATE_BUS_OFF) - cf->can_id |= CAN_ERR_RESTARTED; } if (!skb) { From e13fb9b37cc00616b90df2d620f30345b5ada6ff Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Mon, 6 Aug 2018 15:14:49 +0200 Subject: [PATCH 369/726] can: kvaser_usb: Fix accessing freed memory in kvaser_usb_start_xmit() The call to can_put_echo_skb() may result in the skb being freed. The skb is later used in the call to dev->ops->dev_frame_to_cmd(). This is avoided by moving the call to can_put_echo_skb() after dev->ops->dev_frame_to_cmd(). Reported-by: Dan Carpenter Signed-off-by: Jimmy Assarsson Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c index b939a4c10b84..c89c7d4900d7 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -528,7 +528,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, context = &priv->tx_contexts[i]; context->echo_index = i; - can_put_echo_skb(skb, netdev, context->echo_index); ++priv->active_tx_contexts; if (priv->active_tx_contexts >= (int)dev->max_tx_urbs) netif_stop_queue(netdev); @@ -553,7 +552,6 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, dev_kfree_skb(skb); spin_lock_irqsave(&priv->tx_contexts_lock, flags); - can_free_echo_skb(netdev, context->echo_index); context->echo_index = dev->max_tx_urbs; --priv->active_tx_contexts; netif_wake_queue(netdev); @@ -564,6 +562,8 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, context->priv = priv; + can_put_echo_skb(skb, netdev, context->echo_index); + usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, dev->bulk_out->bEndpointAddress), From 207681fc5f3d5d398f106d1ae0080fc2373f707a Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 29 Aug 2018 01:46:54 +0000 Subject: [PATCH 370/726] can: ucan: remove set but not used variable 'udev' Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/can/usb/ucan.c: In function 'ucan_disconnect': drivers/net/can/usb/ucan.c:1578:21: warning: variable 'udev' set but not used [-Wunused-but-set-variable] struct usb_device *udev; Signed-off-by: YueHaibing Reviewed-by: Martin Elshuber Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/ucan.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c index 0678a38b1af4..c9fd83e8d947 100644 --- a/drivers/net/can/usb/ucan.c +++ b/drivers/net/can/usb/ucan.c @@ -1575,11 +1575,8 @@ err_firmware_needs_update: /* disconnect the device */ static void ucan_disconnect(struct usb_interface *intf) { - struct usb_device *udev; struct ucan_priv *up = usb_get_intfdata(intf); - udev = interface_to_usbdev(intf); - usb_set_intfdata(intf, NULL); if (up) { From ff1f19d56c200b35eb07cfa6668aa6dcac198cec Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 29 Aug 2018 01:25:45 +0000 Subject: [PATCH 371/726] can: ucan: remove duplicated include from ucan.c Remove duplicated include. Signed-off-by: YueHaibing Reviewed-by: Martin Elshuber Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/ucan.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c index c9fd83e8d947..f3d5bda012a1 100644 --- a/drivers/net/can/usb/ucan.c +++ b/drivers/net/can/usb/ucan.c @@ -35,10 +35,6 @@ #include #include -#include -#include -#include - #define UCAN_DRIVER_NAME "ucan" #define UCAN_MAX_RX_URBS 8 /* the CAN controller needs a while to enable/disable the bus */ From 4f145f14f6b98b5aa0dd91bdae518b3f24f74b37 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Mon, 20 Aug 2018 16:49:10 +0200 Subject: [PATCH 372/726] dt-bindings: can: rcar_can: document r8a77965 support Document the support for rcar_can on R8A77965 SoC devices. Add R8A77965 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties (thanks, Sergei). Signed-off-by: Eugeniu Rosca Reviewed-by: Simon Horman Reviewed-by: Kieran Bingham Reviewed-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index cc4372842bf3..47fc68148f38 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -14,6 +14,7 @@ Required properties: "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. @@ -29,11 +30,10 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" -compatible: -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock -and can be used by both CAN and CAN FD controller at the same time. It needs to -be scaled to maximum frequency if any of these controllers use it. This is done +Required properties for R8A7795, R8A7796 and R8A77965: +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can +be used by both CAN and CAN FD controller at the same time. It needs to be +scaled to maximum frequency if any of these controllers use it. This is done using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. From 68c8d209cd4337da4fa04c672f0b62bb735969bc Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Mon, 10 Sep 2018 11:43:13 +0100 Subject: [PATCH 373/726] can: rcar_can: Fix erroneous registration Assigning 2 to "renesas,can-clock-select" tricks the driver into registering the CAN interface, even though we don't want that. This patch improves one of the checks to prevent that from happening. Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks") Signed-off-by: Fabrizio Castro Signed-off-by: Chris Paterson Reviewed-by: Simon Horman Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar/rcar_can.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c index 11662f479e76..771a46083739 100644 --- a/drivers/net/can/rcar/rcar_can.c +++ b/drivers/net/can/rcar/rcar_can.c @@ -24,6 +24,9 @@ #define RCAR_CAN_DRV_NAME "rcar_can" +#define RCAR_SUPPORTED_CLOCKS (BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \ + BIT(CLKR_CLKEXT)) + /* Mailbox configuration: * mailbox 60 - 63 - Rx FIFO mailboxes * mailbox 56 - 59 - Tx FIFO mailboxes @@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev) goto fail_clk; } - if (clock_select >= ARRAY_SIZE(clock_names)) { + if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) { err = -EINVAL; dev_err(&pdev->dev, "invalid CAN clock selected\n"); goto fail_clk; From 868b7c0f43e61f227bf3d7f7d6134bb3c67bb0e8 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Mon, 10 Sep 2018 11:43:14 +0100 Subject: [PATCH 374/726] dt-bindings: can: rcar_can: Add r8a774a1 support Document RZ/G2M (r8a774a1) SoC specific bindings. Signed-off-by: Fabrizio Castro Signed-off-by: Chris Paterson Reviewed-by: Biju Das Reviewed-by: Rob Herring Reviewed-by: Simon Horman Signed-off-by: Marc Kleine-Budde --- .../devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 47fc68148f38..9936b9ee67c3 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -18,15 +19,21 @@ Required properties: "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -42,8 +49,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- From f164d0204b1156a7e0d8d1622c1a8d25752befec Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sat, 27 Oct 2018 10:36:54 +0200 Subject: [PATCH 375/726] can: hi311x: Use level-triggered interrupt If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck Cc: Akshay Bhat Cc: Casey Fitzpatrick Signed-off-by: Lukas Wunner Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/holt_hi311x.txt | 2 +- drivers/net/can/spi/hi311x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt index 903a78da65be..3a9926f99937 100644 --- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt +++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt @@ -17,7 +17,7 @@ Example: reg = <1>; clocks = <&clk32m>; interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; }; diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c index 53e320c92a8b..ddaf46239e39 100644 --- a/drivers/net/can/spi/hi311x.c +++ b/drivers/net/can/spi/hi311x.c @@ -760,7 +760,7 @@ static int hi3110_open(struct net_device *net) { struct hi3110_priv *priv = netdev_priv(net); struct spi_device *spi = priv->spi; - unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_RISING; + unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_HIGH; int ret; ret = open_candev(net); From 5178b7cd8e42448b1041716f124734eaaa36ca50 Mon Sep 17 00:00:00 2001 From: Pankaj Bansal Date: Wed, 1 Aug 2018 19:36:46 +0530 Subject: [PATCH 376/726] can: flexcan: Unlock the MB unconditionally Unlock the MB irrespective of reception method being FIFO or timestamp based. It is optional but recommended to unlock Mailbox as soon as possible and make it available for reception. Reported-by: Alexander Stein Signed-off-by: Pankaj Bansal Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 8e972ef08637..0431f8d05518 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -720,9 +720,14 @@ static unsigned int flexcan_mailbox_read(struct can_rx_offload *offload, priv->write(BIT(n - 32), ®s->iflag2); } else { priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1); - priv->read(®s->timer); } + /* Read the Free Running Timer. It is optional but recommended + * to unlock Mailbox as soon as possible and make it available + * for reception. + */ + priv->read(®s->timer); + return 1; } From cbffaf7aa09edbaea2bc7dc440c945297095e2fd Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 11 Oct 2018 17:01:25 +0200 Subject: [PATCH 377/726] can: flexcan: Always use last mailbox for TX Essentially this patch moves the TX mailbox to position 63, regardless of timestamp based offloading or RX FIFO. So mainly the iflag register usage regarding TX has changed. The rest is consolidating RX FIFO and timestamp offloading as they now use both the same TX mailbox. The reason is a very annoying behavior regarding sending RTR frames when _not_ using RX FIFO: If a TX mailbox sent a RTR frame it becomes a RX mailbox. For that reason flexcan_irq disables the TX mailbox again. But if during the time the RTR was sent and the TX mailbox is disabled a new CAN frames is received, it is lost without notice. The reason is that so-called "Move-in" process starts from the lowest mailbox which happen to be a TX mailbox set to EMPTY. Steps to reproduce (I used an imx7d): 1. generate regular bursts of messages 2. send a RTR from flexcan with higher priority than burst messages every 1ms, e.g. cangen -I 0x100 -L 0 -g 1 -R can0 3. notice a lost message without notification after some seconds When running an iperf in parallel this problem is occurring even more frequently. Using filters is not possible as at least one single CAN-ID is allowed. Handling the TX MB during RX is also not possible as there is no race-free disable of RX MB. There is still a slight window when the described problem can occur. But for that all RX MB must be in use which is essentially next to an overrun. Still there will be no indication if it ever occurs. Signed-off-by: Alexander Stein Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 67 +++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 34 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 0431f8d05518..677c41701cf3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -135,13 +135,12 @@ /* FLEXCAN interrupt flag register (IFLAG) bits */ /* Errata ERR005829 step7: Reserve first valid MB */ -#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8 -#define FLEXCAN_TX_MB_OFF_FIFO 9 +#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8 #define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP 0 -#define FLEXCAN_TX_MB_OFF_TIMESTAMP 1 -#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_OFF_TIMESTAMP + 1) -#define FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST 63 -#define FLEXCAN_IFLAG_MB(x) BIT(x) +#define FLEXCAN_TX_MB 63 +#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1) +#define FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST (FLEXCAN_TX_MB - 1) +#define FLEXCAN_IFLAG_MB(x) BIT(x & 0x1f) #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7) #define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6) #define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE BIT(5) @@ -737,9 +736,9 @@ static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv) struct flexcan_regs __iomem *regs = priv->regs; u32 iflag1, iflag2; - iflag2 = priv->read(®s->iflag2) & priv->reg_imask2_default; - iflag1 = priv->read(®s->iflag1) & priv->reg_imask1_default & + iflag2 = priv->read(®s->iflag2) & priv->reg_imask2_default & ~FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + iflag1 = priv->read(®s->iflag1) & priv->reg_imask1_default; return (u64)iflag2 << 32 | iflag1; } @@ -751,11 +750,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->regs; irqreturn_t handled = IRQ_NONE; - u32 reg_iflag1, reg_esr; + u32 reg_iflag2, reg_esr; enum can_state last_state = priv->can.state; - reg_iflag1 = priv->read(®s->iflag1); - /* reception interrupt */ if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { u64 reg_iflag; @@ -769,6 +766,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) break; } } else { + u32 reg_iflag1; + + reg_iflag1 = priv->read(®s->iflag1); if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE) { handled = IRQ_HANDLED; can_rx_offload_irq_offload_fifo(&priv->offload); @@ -784,8 +784,10 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) } } + reg_iflag2 = priv->read(®s->iflag2); + /* transmission complete interrupt */ - if (reg_iflag1 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { + if (reg_iflag2 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { handled = IRQ_HANDLED; stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; @@ -794,7 +796,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* after sending a RTR frame MB is in RX mode */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, &priv->tx_mb->can_ctrl); - priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), ®s->iflag1); + priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), ®s->iflag2); netif_wake_queue(dev); } @@ -936,15 +938,13 @@ static int flexcan_chip_start(struct net_device *dev) reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ | - FLEXCAN_MCR_IDAM_C; + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { + if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) reg_mcr &= ~FLEXCAN_MCR_FEN; - reg_mcr |= FLEXCAN_MCR_MAXMB(priv->offload.mb_last); - } else { - reg_mcr |= FLEXCAN_MCR_FEN | - FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); - } + else + reg_mcr |= FLEXCAN_MCR_FEN; + netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); priv->write(reg_mcr, ®s->mcr); @@ -987,16 +987,17 @@ static int flexcan_chip_start(struct net_device *dev) priv->write(reg_ctrl2, ®s->ctrl2); } - /* clear and invalidate all mailboxes first */ - for (i = priv->tx_mb_idx; i < ARRAY_SIZE(regs->mb); i++) { - priv->write(FLEXCAN_MB_CODE_RX_INACTIVE, - ®s->mb[i].can_ctrl); - } - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { - for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) + for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) { priv->write(FLEXCAN_MB_CODE_RX_EMPTY, ®s->mb[i].can_ctrl); + } + } else { + /* clear and invalidate unused mailboxes first */ + for (i = FLEXCAN_TX_MB_RESERVED_OFF_FIFO; i <= ARRAY_SIZE(regs->mb); i++) { + priv->write(FLEXCAN_MB_CODE_RX_INACTIVE, + ®s->mb[i].can_ctrl); + } } /* Errata ERR005829: mark first TX mailbox as INACTIVE */ @@ -1360,17 +1361,15 @@ static int flexcan_probe(struct platform_device *pdev) priv->devtype_data = devtype_data; priv->reg_xceiver = reg_xceiver; - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { - priv->tx_mb_idx = FLEXCAN_TX_MB_OFF_TIMESTAMP; + if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP]; - } else { - priv->tx_mb_idx = FLEXCAN_TX_MB_OFF_FIFO; + else priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_FIFO]; - } + priv->tx_mb_idx = FLEXCAN_TX_MB; priv->tx_mb = ®s->mb[priv->tx_mb_idx]; - priv->reg_imask1_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); - priv->reg_imask2_default = 0; + priv->reg_imask1_default = 0; + priv->reg_imask2_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); priv->offload.mailbox_read = flexcan_mailbox_read; From e05237f9da42ee52e73acea0bb082d788e111229 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 9 Nov 2018 15:01:50 +0100 Subject: [PATCH 378/726] can: flexcan: remove not needed struct flexcan_priv::tx_mb and struct flexcan_priv::tx_mb_idx The previous patch changes the TX path to always use the last mailbox regardless of the used offload scheme (rx-fifo or timestamp based). This means members "tx_mb" and "tx_mb_idx" of the struct flexcan_priv don't depend on the offload scheme, so replace them by compile time constants. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 677c41701cf3..68b46395c580 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -258,9 +258,7 @@ struct flexcan_priv { struct can_rx_offload offload; struct flexcan_regs __iomem *regs; - struct flexcan_mb __iomem *tx_mb; struct flexcan_mb __iomem *tx_mb_reserved; - u8 tx_mb_idx; u32 reg_ctrl_default; u32 reg_imask1_default; u32 reg_imask2_default; @@ -514,6 +512,7 @@ static int flexcan_get_berr_counter(const struct net_device *dev, static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) { const struct flexcan_priv *priv = netdev_priv(dev); + struct flexcan_regs __iomem *regs = priv->regs; struct can_frame *cf = (struct can_frame *)skb->data; u32 can_id; u32 data; @@ -536,17 +535,17 @@ static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *de if (cf->can_dlc > 0) { data = be32_to_cpup((__be32 *)&cf->data[0]); - priv->write(data, &priv->tx_mb->data[0]); + priv->write(data, ®s->mb[FLEXCAN_TX_MB].data[0]); } if (cf->can_dlc > 4) { data = be32_to_cpup((__be32 *)&cf->data[4]); - priv->write(data, &priv->tx_mb->data[1]); + priv->write(data, ®s->mb[FLEXCAN_TX_MB].data[1]); } can_put_echo_skb(skb, dev, 0); - priv->write(can_id, &priv->tx_mb->can_id); - priv->write(ctrl, &priv->tx_mb->can_ctrl); + priv->write(can_id, ®s->mb[FLEXCAN_TX_MB].can_id); + priv->write(ctrl, ®s->mb[FLEXCAN_TX_MB].can_ctrl); /* Errata ERR005829 step8: * Write twice INACTIVE(0x8) code to first MB. @@ -737,7 +736,7 @@ static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv) u32 iflag1, iflag2; iflag2 = priv->read(®s->iflag2) & priv->reg_imask2_default & - ~FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + ~FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB); iflag1 = priv->read(®s->iflag1) & priv->reg_imask1_default; return (u64)iflag2 << 32 | iflag1; @@ -787,7 +786,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) reg_iflag2 = priv->read(®s->iflag2); /* transmission complete interrupt */ - if (reg_iflag2 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { + if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) { handled = IRQ_HANDLED; stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; @@ -795,8 +794,8 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* after sending a RTR frame MB is in RX mode */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, - &priv->tx_mb->can_ctrl); - priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), ®s->iflag2); + ®s->mb[FLEXCAN_TX_MB].can_ctrl); + priv->write(FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB), ®s->iflag2); netif_wake_queue(dev); } @@ -938,7 +937,7 @@ static int flexcan_chip_start(struct net_device *dev) reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ | - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(FLEXCAN_TX_MB); if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) reg_mcr &= ~FLEXCAN_MCR_FEN; @@ -1006,7 +1005,7 @@ static int flexcan_chip_start(struct net_device *dev) /* mark TX mailbox as INACTIVE */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, - &priv->tx_mb->can_ctrl); + ®s->mb[FLEXCAN_TX_MB].can_ctrl); /* acceptance mask/acceptance code (accept everything) */ priv->write(0x0, ®s->rxgmask); @@ -1365,11 +1364,9 @@ static int flexcan_probe(struct platform_device *pdev) priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP]; else priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_FIFO]; - priv->tx_mb_idx = FLEXCAN_TX_MB; - priv->tx_mb = ®s->mb[priv->tx_mb_idx]; priv->reg_imask1_default = 0; - priv->reg_imask2_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + priv->reg_imask2_default = FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB); priv->offload.mailbox_read = flexcan_mailbox_read; From a4310fa2f24687888ce80fdb0e88583561a23700 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 31 Oct 2018 10:37:46 +0100 Subject: [PATCH 379/726] can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb() This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 36 +++++++++++++++++++++++++----------- include/linux/can/dev.h | 1 + 2 files changed, 26 insertions(+), 11 deletions(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 49163570a63a..80530ab37b1e 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -477,14 +477,7 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, } EXPORT_SYMBOL_GPL(can_put_echo_skb); -/* - * Get the skb from the stack and loop it back locally - * - * The function is typically called when the TX done interrupt - * is handled in the device driver. The driver must protect - * access to priv->echo_skb, if necessary. - */ -unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) +struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr) { struct can_priv *priv = netdev_priv(dev); @@ -495,13 +488,34 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) struct can_frame *cf = (struct can_frame *)skb->data; u8 dlc = cf->can_dlc; - netif_rx(priv->echo_skb[idx]); + *len_ptr = dlc; priv->echo_skb[idx] = NULL; - return dlc; + return skb; } - return 0; + return NULL; +} + +/* + * Get the skb from the stack and loop it back locally + * + * The function is typically called when the TX done interrupt + * is handled in the device driver. The driver must protect + * access to priv->echo_skb, if necessary. + */ +unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) +{ + struct sk_buff *skb; + u8 len; + + skb = __can_get_echo_skb(dev, idx, &len); + if (!skb) + return 0; + + netif_rx(skb); + + return len; } EXPORT_SYMBOL_GPL(can_get_echo_skb); diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index a83e1f632eb7..f01623aef2f7 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -169,6 +169,7 @@ void can_change_state(struct net_device *dev, struct can_frame *cf, void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, unsigned int idx); +struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr); unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); void can_free_echo_skb(struct net_device *dev, unsigned int idx); From 200f5c49f7a2cd694436bfc6cb0662b794c96736 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 31 Oct 2018 11:08:21 +0100 Subject: [PATCH 380/726] can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 80530ab37b1e..46cc5fec4043 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -484,11 +484,14 @@ struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 BUG_ON(idx >= priv->echo_skb_max); if (priv->echo_skb[idx]) { + /* Using "struct canfd_frame::len" for the frame + * length is supported on both CAN and CANFD frames. + */ struct sk_buff *skb = priv->echo_skb[idx]; - struct can_frame *cf = (struct can_frame *)skb->data; - u8 dlc = cf->can_dlc; + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + u8 len = cf->len; - *len_ptr = dlc; + *len_ptr = len; priv->echo_skb[idx] = NULL; return skb; From e7a6994d043a1e31d5b17706a22ce33d2a3e4cdc Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 31 Oct 2018 14:05:26 +0100 Subject: [PATCH 381/726] can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 46cc5fec4043..c05e4d50d43d 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -481,7 +481,11 @@ struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 { struct can_priv *priv = netdev_priv(dev); - BUG_ON(idx >= priv->echo_skb_max); + if (idx >= priv->echo_skb_max) { + netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n", + __func__, idx, priv->echo_skb_max); + return NULL; + } if (priv->echo_skb[idx]) { /* Using "struct canfd_frame::len" for the frame From 7da11ba5c5066dadc2e96835a6233d56d7b7764a Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 31 Oct 2018 14:15:13 +0100 Subject: [PATCH 382/726] can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index c05e4d50d43d..3b3f88ffab53 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -480,6 +480,8 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb); struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr) { struct can_priv *priv = netdev_priv(dev); + struct sk_buff *skb = priv->echo_skb[idx]; + struct canfd_frame *cf; if (idx >= priv->echo_skb_max) { netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n", @@ -487,21 +489,20 @@ struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 return NULL; } - if (priv->echo_skb[idx]) { - /* Using "struct canfd_frame::len" for the frame - * length is supported on both CAN and CANFD frames. - */ - struct sk_buff *skb = priv->echo_skb[idx]; - struct canfd_frame *cf = (struct canfd_frame *)skb->data; - u8 len = cf->len; - - *len_ptr = len; - priv->echo_skb[idx] = NULL; - - return skb; + if (!skb) { + netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n", + __func__, idx); + return NULL; } - return NULL; + /* Using "struct canfd_frame::len" for the frame + * length is supported on both CAN and CANFD frames. + */ + cf = (struct canfd_frame *)skb->data; + *len_ptr = cf->len; + priv->echo_skb[idx] = NULL; + + return skb; } /* From 55059f2b7f868cd43b3ad30e28e18347e1b46ace Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 18 Sep 2018 11:40:38 +0200 Subject: [PATCH 383/726] can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions Current CAN framework can't guarantee proper/chronological order of RX and TX-ECHO messages. To make this possible, drivers should use this functions instead of can_get_echo_skb(). Signed-off-by: Oleksij Rempel Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rx-offload.c | 46 ++++++++++++++++++++++++++++++++++ include/linux/can/rx-offload.h | 4 +++ 2 files changed, 50 insertions(+) diff --git a/drivers/net/can/rx-offload.c b/drivers/net/can/rx-offload.c index c7d05027a7a0..c368686e2164 100644 --- a/drivers/net/can/rx-offload.c +++ b/drivers/net/can/rx-offload.c @@ -211,6 +211,52 @@ int can_rx_offload_irq_offload_fifo(struct can_rx_offload *offload) } EXPORT_SYMBOL_GPL(can_rx_offload_irq_offload_fifo); +int can_rx_offload_queue_sorted(struct can_rx_offload *offload, + struct sk_buff *skb, u32 timestamp) +{ + struct can_rx_offload_cb *cb; + unsigned long flags; + + if (skb_queue_len(&offload->skb_queue) > + offload->skb_queue_len_max) + return -ENOMEM; + + cb = can_rx_offload_get_cb(skb); + cb->timestamp = timestamp; + + spin_lock_irqsave(&offload->skb_queue.lock, flags); + __skb_queue_add_sort(&offload->skb_queue, skb, can_rx_offload_compare); + spin_unlock_irqrestore(&offload->skb_queue.lock, flags); + + can_rx_offload_schedule(offload); + + return 0; +} +EXPORT_SYMBOL_GPL(can_rx_offload_queue_sorted); + +unsigned int can_rx_offload_get_echo_skb(struct can_rx_offload *offload, + unsigned int idx, u32 timestamp) +{ + struct net_device *dev = offload->dev; + struct net_device_stats *stats = &dev->stats; + struct sk_buff *skb; + u8 len; + int err; + + skb = __can_get_echo_skb(dev, idx, &len); + if (!skb) + return 0; + + err = can_rx_offload_queue_sorted(offload, skb, timestamp); + if (err) { + stats->rx_errors++; + stats->tx_fifo_errors++; + } + + return len; +} +EXPORT_SYMBOL_GPL(can_rx_offload_get_echo_skb); + int can_rx_offload_irq_queue_err_skb(struct can_rx_offload *offload, struct sk_buff *skb) { if (skb_queue_len(&offload->skb_queue) > diff --git a/include/linux/can/rx-offload.h b/include/linux/can/rx-offload.h index cb31683bbe15..01a7c9e5d8d8 100644 --- a/include/linux/can/rx-offload.h +++ b/include/linux/can/rx-offload.h @@ -41,6 +41,10 @@ int can_rx_offload_add_timestamp(struct net_device *dev, struct can_rx_offload * int can_rx_offload_add_fifo(struct net_device *dev, struct can_rx_offload *offload, unsigned int weight); int can_rx_offload_irq_offload_timestamp(struct can_rx_offload *offload, u64 reg); int can_rx_offload_irq_offload_fifo(struct can_rx_offload *offload); +int can_rx_offload_queue_sorted(struct can_rx_offload *offload, + struct sk_buff *skb, u32 timestamp); +unsigned int can_rx_offload_get_echo_skb(struct can_rx_offload *offload, + unsigned int idx, u32 timestamp); int can_rx_offload_irq_queue_err_skb(struct can_rx_offload *offload, struct sk_buff *skb); void can_rx_offload_reset(struct can_rx_offload *offload); void can_rx_offload_del(struct can_rx_offload *offload); From ab214c48387aaaadcf8246b4b00d8b78286fde1b Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 9 Nov 2018 16:44:10 +0530 Subject: [PATCH 384/726] dt-bindings: i2c: omap: Add new compatible for AM654 SoCs AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle AM654 SoCs. While at that reformat the existing compatible list for older SoCs to list one valid compatible per line. Signed-off-by: Vignesh R Reviewed-by: Rob Herring Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-omap.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 7e49839d4124..4b90ba9f31b7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,8 +1,12 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" - or "ti,omap4-i2c" +- compatible : Must be + "ti,omap2420-i2c" for OMAP2420 SoCs + "ti,omap2430-i2c" for OMAP2430 SoCs + "ti,omap3-i2c" for OMAP3 SoCs + "ti,omap4-i2c" for OMAP4+ SoCs + "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs - ti,hwmods : Must be "i2c", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; From 5b277402deac0691226a947df71c581686bd4020 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 9 Nov 2018 16:44:11 +0530 Subject: [PATCH 385/726] i2c: omap: Enable for ARCH_K3 Allow I2C_OMAP to be built for K3 platforms. Signed-off-by: Vignesh R Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 56ccb1ea7da5..77dc94b44011 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -752,7 +752,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" - depends on ARCH_OMAP + depends on ARCH_OMAP || ARCH_K3 default y if MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes to this option, support will be included for the From 350784e79230f85e9007c4c7d8b2259717d67a4d Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 9 Nov 2018 16:44:12 +0530 Subject: [PATCH 386/726] MAINTAINERS: Add entry for i2c-omap driver Add separate entry for i2c-omap and add my name as maintainer for this driver. Signed-off-by: Vignesh R Acked-by: Tony Lindgren Signed-off-by: Wolfram Sang --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f4855974f325..259fe9445d2f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10784,6 +10784,14 @@ L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/mach-omap2/omap_hwmod.* +OMAP I2C DRIVER +M: Vignesh R +L: linux-omap@vger.kernel.org +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/i2c/i2c-omap.txt +F: drivers/i2c/busses/i2c-omap.c + OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS) M: Laurent Pinchart L: linux-media@vger.kernel.org From 848bd3f3de9d44950c00eda6c115e8e9785440da Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 2 Nov 2018 13:57:32 -0700 Subject: [PATCH 387/726] i2c: qcom-geni: Fix runtime PM mismatch with child devices We need to enable runtime PM on this i2c controller before populating child devices with i2c_add_adapter(). Otherwise, if a child device uses runtime PM and stays runtime PM enabled we'll get the following warning at boot. Enabling runtime PM for inactive device (a98000.i2c) with active children [...] Call trace: pm_runtime_enable+0xd8/0xf8 geni_i2c_probe+0x440/0x460 platform_drv_probe+0x74/0xc8 [...] Let's move the runtime PM enabling and setup to before we add the adapter, so that this device can respond to runtime PM requests from children. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Stephen Boyd Reviewed-by: Douglas Anderson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-geni.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 527f55c8c4c7..db075bc0d952 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -571,18 +571,19 @@ static int geni_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); - ret = i2c_add_adapter(&gi2c->adap); - if (ret) { - dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret); - return ret; - } - gi2c->suspended = 1; pm_runtime_set_suspended(gi2c->se.dev); pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY); pm_runtime_use_autosuspend(gi2c->se.dev); pm_runtime_enable(gi2c->se.dev); + ret = i2c_add_adapter(&gi2c->adap); + if (ret) { + dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret); + pm_runtime_disable(gi2c->se.dev); + return ret; + } + return 0; } @@ -590,8 +591,8 @@ static int geni_i2c_remove(struct platform_device *pdev) { struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev); - pm_runtime_disable(gi2c->se.dev); i2c_del_adapter(&gi2c->adap); + pm_runtime_disable(gi2c->se.dev); return 0; } From f068090426ea8d72c408ebd42953a82a88e2282c Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 9 Nov 2018 17:21:17 +0200 Subject: [PATCH 388/726] xhci: Fix leaking USB3 shared_hcd at xhci removal Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley Cc: Chunfeng Yun Cc: Thierry Reding Cc: Jianguo Sun Cc: Reported-by: Jack Pham Tested-by: Jack Pham Tested-by: Peter Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-histb.c | 6 ++++-- drivers/usb/host/xhci-mtk.c | 6 ++++-- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-plat.c | 6 ++++-- drivers/usb/host/xhci-tegra.c | 1 + drivers/usb/host/xhci.c | 2 -- 6 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c index 27f00160332e..3c4abb5a1c3f 100644 --- a/drivers/usb/host/xhci-histb.c +++ b/drivers/usb/host/xhci-histb.c @@ -325,14 +325,16 @@ static int xhci_histb_remove(struct platform_device *dev) struct xhci_hcd_histb *histb = platform_get_drvdata(dev); struct usb_hcd *hcd = histb->hcd; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_hcd *shared_hcd = xhci->shared_hcd; xhci->xhc_state |= XHCI_STATE_REMOVING; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; device_wakeup_disable(&dev->dev); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); xhci_histb_host_disable(histb); usb_put_hcd(hcd); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 71d0d33c3286..60987c787e44 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -590,12 +590,14 @@ static int xhci_mtk_remove(struct platform_device *dev) struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); struct usb_hcd *hcd = mtk->hcd; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_hcd *shared_hcd = xhci->shared_hcd; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; device_init_wakeup(&dev->dev, false); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); usb_put_hcd(hcd); xhci_mtk_sch_exit(mtk); xhci_mtk_clks_disable(mtk); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 01c57055c0c5..1fb448cd2667 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -380,6 +380,7 @@ static void xhci_pci_remove(struct pci_dev *dev) if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; } /* Workaround for spurious wakeups at shutdown with HSW */ diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 32b5574ad5c5..ef09cb06212f 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -362,14 +362,16 @@ static int xhci_plat_remove(struct platform_device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; struct clk *reg_clk = xhci->reg_clk; + struct usb_hcd *shared_hcd = xhci->shared_hcd; xhci->xhc_state |= XHCI_STATE_REMOVING; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); clk_disable_unprepare(clk); clk_disable_unprepare(reg_clk); diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 6b5db344de30..938ff06c0349 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1303,6 +1303,7 @@ static int tegra_xusb_remove(struct platform_device *pdev) usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; usb_remove_hcd(tegra->hcd); usb_put_hcd(tegra->hcd); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0420eefa647a..c928dbbff881 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -719,8 +719,6 @@ static void xhci_stop(struct usb_hcd *hcd) /* Only halt host and free memory after both hcds are removed */ if (!usb_hcd_is_primary_hcd(hcd)) { - /* usb core will free this hcd shortly, unset pointer */ - xhci->shared_hcd = NULL; mutex_unlock(&xhci->mutex); return; } From 1245374e9b8340fc255fd51b2015173a83050d03 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 9 Nov 2018 17:21:18 +0200 Subject: [PATCH 389/726] xhci: handle port status events for removed USB3 hcd At xhci removal the USB3 hcd (shared_hcd) is removed before the primary USB2 hcd. Interrupts for port status changes may still occur for USB3 ports after the shared_hcd is freed, causing NULL pointer dereference. Check if xhci->shared_hcd is still valid before handing USB3 port events Cc: Reported-by: Peter Chen Tested-by: Jack Pham Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a8d92c90fb58..80d464ea5a9a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1556,6 +1556,13 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } + /* We might get interrupts after shared_hcd is removed */ + if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) { + xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n"); + bogus_port_status = true; + goto cleanup; + } + hcd = port->rhub->hcd; bus_state = &xhci->bus_state[hcd_index(hcd)]; hcd_portnum = port->hcd_portnum; From d9193efba84fe4c4aa22a569fade5e6ca971f8af Mon Sep 17 00:00:00 2001 From: Sandeep Singh Date: Fri, 9 Nov 2018 17:21:19 +0200 Subject: [PATCH 390/726] xhci: Add check for invalid byte size error when UAS devices are connected. Observed "TRB completion code (27)" error which corresponds to Stopped - Length Invalid error(xhci spec section 4.17.4) while connecting USB to SATA bridge. Looks like this case was not considered when the following patch[1] was committed. Hence adding this new check which can prevent the invalid byte size error. [1] ade2e3a xhci: handle transfer events without TRB pointer Cc: Signed-off-by: Sandeep Singh cc: Nehal Shah cc: Shyam Sundar S K Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 80d464ea5a9a..730a6ecd85fc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2273,6 +2273,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, goto cleanup; case COMP_RING_UNDERRUN: case COMP_RING_OVERRUN: + case COMP_STOPPED_LENGTH_INVALID: goto cleanup; default: xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n", From 958c0bd86075d4ef1c936998deefe1947e539240 Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Fri, 9 Nov 2018 17:21:20 +0200 Subject: [PATCH 391/726] usb: xhci: fix uninitialized completion when USB3 port got wrong status Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci-ring.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 12eea73d9f20..60e4ac7ae4f8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_SUSPEND; } if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status)) { + !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 730a6ecd85fc..250b758efe9f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1646,7 +1646,7 @@ static void handle_port_status(struct xhci_hcd *xhci, * RExit to a disconnect state). If so, let the the driver know it's * out of the RExit state. */ - if (!DEV_SUPERSPEED_ANY(portsc) && + if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 && test_and_clear_bit(hcd_portnum, &bus_state->rexit_ports)) { complete(&bus_state->rexit_done[hcd_portnum]); From a5baeaeabcca3244782a9b6382ebab6f8a58f583 Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Fri, 9 Nov 2018 17:21:21 +0200 Subject: [PATCH 392/726] usb: xhci: fix timeout for transition from RExit to U0 This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 4 ++-- drivers/usb/host/xhci.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 60e4ac7ae4f8..da98a11244e2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -921,7 +921,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, time_left = wait_for_completion_timeout( &bus_state->rexit_done[wIndex], msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT)); + XHCI_MAX_REXIT_TIMEOUT_MS)); spin_lock_irqsave(&xhci->lock, flags); if (time_left) { @@ -935,7 +935,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT, + XHCI_MAX_REXIT_TIMEOUT_MS, port_status); status |= USB_PORT_STAT_SUSPEND; clear_bit(wIndex, &bus_state->rexit_ports); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index bf0b3692dc9a..5f0c4f197f13 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1680,7 +1680,7 @@ struct xhci_bus_state { * It can take up to 20 ms to transition from RExit to U0 on the * Intel Lynx Point LP xHCI host. */ -#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) +#define XHCI_MAX_REXIT_TIMEOUT_MS 20 static inline unsigned int hcd_index(struct usb_hcd *hcd) { From 11644a7659529730eaf2f166efaabe7c3dc7af8c Mon Sep 17 00:00:00 2001 From: "Cherian, George" Date: Fri, 9 Nov 2018 17:21:22 +0200 Subject: [PATCH 393/726] xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable@vger.kernel.org Signed-off-by: George Cherian Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 5 +++++ drivers/usb/host/xhci-ring.c | 35 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 3 files changed, 40 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1fb448cd2667..a9515265db4d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -248,6 +248,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; + if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || + pdev->vendor == PCI_VENDOR_ID_CAVIUM) && + pdev->device == 0x9026) + xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 250b758efe9f..65750582133f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1521,6 +1521,35 @@ static void handle_device_notification(struct xhci_hcd *xhci, usb_wakeup_notification(udev->parent, udev->portnum); } +/* + * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI + * Controller. + * As per ThunderX2errata-129 USB 2 device may come up as USB 1 + * If a connection to a USB 1 device is followed by another connection + * to a USB 2 device. + * + * Reset the PHY after the USB device is disconnected if device speed + * is less than HCD_USB3. + * Retry the reset sequence max of 4 times checking the PLL lock status. + * + */ +static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci) +{ + struct usb_hcd *hcd = xhci_to_hcd(xhci); + u32 pll_lock_check; + u32 retry_count = 4; + + do { + /* Assert PHY reset */ + writel(0x6F, hcd->regs + 0x1048); + udelay(10); + /* De-assert the PHY reset */ + writel(0x7F, hcd->regs + 0x1048); + udelay(200); + pll_lock_check = readl(hcd->regs + 0x1070); + } while (!(pll_lock_check & 0x1) && --retry_count); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1654,8 +1683,12 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } - if (hcd->speed < HCD_USB3) + if (hcd->speed < HCD_USB3) { xhci_test_and_clear_bit(xhci, port, PORT_PLC); + if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) && + (portsc & PORT_CSC) && !(portsc & PORT_CONNECT)) + xhci_cavium_reset_phy_quirk(xhci); + } cleanup: /* Update event ring dequeue pointer before dropping the lock */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5f0c4f197f13..260b259b72bc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1849,6 +1849,7 @@ struct xhci_hcd { #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) #define XHCI_ZERO_64B_REGS BIT_ULL(32) #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33) +#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) unsigned int num_active_eps; unsigned int limit_active_eps; From ed72bc8bcb9277061e753faf300b20f97323761c Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 18 Sep 2018 11:40:39 +0200 Subject: [PATCH 394/726] can: flexcan: handle tx-complete CAN frames via rx-offload infrastructure Current flexcan driver will put TX-ECHO in regular unsorted way, in this case TX-ECHO can come after the response to the same TXed message. In some cases, for example for J1939 stack, things will break. This patch is using new rx-offload API to put the messages just in the right place. Signed-off-by: Oleksij Rempel Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 68b46395c580..41a175f80c4b 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -787,8 +787,11 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* transmission complete interrupt */ if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) { + u32 reg_ctrl = priv->read(®s->mb[FLEXCAN_TX_MB].can_ctrl); + handled = IRQ_HANDLED; - stats->tx_bytes += can_get_echo_skb(dev, 0); + stats->tx_bytes += can_rx_offload_get_echo_skb(&priv->offload, + 0, reg_ctrl << 16); stats->tx_packets++; can_led_event(dev, CAN_LED_EVENT_TX); From 4530ec36bb1e0d24f41c33229694adacda3d5d89 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 18 Sep 2018 11:40:40 +0200 Subject: [PATCH 395/726] can: rx-offload: rename can_rx_offload_irq_queue_err_skb() to can_rx_offload_queue_tail() This function has nothing todo with error. Signed-off-by: Oleksij Rempel Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 4 ++-- drivers/net/can/rx-offload.c | 5 +++-- include/linux/can/rx-offload.h | 3 ++- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 41a175f80c4b..5923bd0ec118 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -610,7 +610,7 @@ static void flexcan_irq_bus_err(struct net_device *dev, u32 reg_esr) if (tx_errors) dev->stats.tx_errors++; - can_rx_offload_irq_queue_err_skb(&priv->offload, skb); + can_rx_offload_queue_tail(&priv->offload, skb); } static void flexcan_irq_state(struct net_device *dev, u32 reg_esr) @@ -650,7 +650,7 @@ static void flexcan_irq_state(struct net_device *dev, u32 reg_esr) if (unlikely(new_state == CAN_STATE_BUS_OFF)) can_bus_off(dev); - can_rx_offload_irq_queue_err_skb(&priv->offload, skb); + can_rx_offload_queue_tail(&priv->offload, skb); } static inline struct flexcan_priv *rx_offload_to_priv(struct can_rx_offload *offload) diff --git a/drivers/net/can/rx-offload.c b/drivers/net/can/rx-offload.c index c368686e2164..2ce4fa8698c7 100644 --- a/drivers/net/can/rx-offload.c +++ b/drivers/net/can/rx-offload.c @@ -257,7 +257,8 @@ unsigned int can_rx_offload_get_echo_skb(struct can_rx_offload *offload, } EXPORT_SYMBOL_GPL(can_rx_offload_get_echo_skb); -int can_rx_offload_irq_queue_err_skb(struct can_rx_offload *offload, struct sk_buff *skb) +int can_rx_offload_queue_tail(struct can_rx_offload *offload, + struct sk_buff *skb) { if (skb_queue_len(&offload->skb_queue) > offload->skb_queue_len_max) @@ -268,7 +269,7 @@ int can_rx_offload_irq_queue_err_skb(struct can_rx_offload *offload, struct sk_b return 0; } -EXPORT_SYMBOL_GPL(can_rx_offload_irq_queue_err_skb); +EXPORT_SYMBOL_GPL(can_rx_offload_queue_tail); static int can_rx_offload_init_queue(struct net_device *dev, struct can_rx_offload *offload, unsigned int weight) { diff --git a/include/linux/can/rx-offload.h b/include/linux/can/rx-offload.h index 01a7c9e5d8d8..8268811a697e 100644 --- a/include/linux/can/rx-offload.h +++ b/include/linux/can/rx-offload.h @@ -45,7 +45,8 @@ int can_rx_offload_queue_sorted(struct can_rx_offload *offload, struct sk_buff *skb, u32 timestamp); unsigned int can_rx_offload_get_echo_skb(struct can_rx_offload *offload, unsigned int idx, u32 timestamp); -int can_rx_offload_irq_queue_err_skb(struct can_rx_offload *offload, struct sk_buff *skb); +int can_rx_offload_queue_tail(struct can_rx_offload *offload, + struct sk_buff *skb); void can_rx_offload_reset(struct can_rx_offload *offload); void can_rx_offload_del(struct can_rx_offload *offload); void can_rx_offload_enable(struct can_rx_offload *offload); From d788905f68fd4714c82936f6f7f1d3644d7ae7ef Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 18 Sep 2018 11:40:41 +0200 Subject: [PATCH 396/726] can: flexcan: use can_rx_offload_queue_sorted() for flexcan_irq_bus_*() Currently, in case of bus error, driver will generate error message and put in the tail of the message queue. To avoid confusions, this change should place the bus related messages in proper order. Signed-off-by: Oleksij Rempel Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 5923bd0ec118..75ce11395ee8 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -561,9 +561,13 @@ static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *de static void flexcan_irq_bus_err(struct net_device *dev, u32 reg_esr) { struct flexcan_priv *priv = netdev_priv(dev); + struct flexcan_regs __iomem *regs = priv->regs; struct sk_buff *skb; struct can_frame *cf; bool rx_errors = false, tx_errors = false; + u32 timestamp; + + timestamp = priv->read(®s->timer) << 16; skb = alloc_can_err_skb(dev, &cf); if (unlikely(!skb)) @@ -610,17 +614,21 @@ static void flexcan_irq_bus_err(struct net_device *dev, u32 reg_esr) if (tx_errors) dev->stats.tx_errors++; - can_rx_offload_queue_tail(&priv->offload, skb); + can_rx_offload_queue_sorted(&priv->offload, skb, timestamp); } static void flexcan_irq_state(struct net_device *dev, u32 reg_esr) { struct flexcan_priv *priv = netdev_priv(dev); + struct flexcan_regs __iomem *regs = priv->regs; struct sk_buff *skb; struct can_frame *cf; enum can_state new_state, rx_state, tx_state; int flt; struct can_berr_counter bec; + u32 timestamp; + + timestamp = priv->read(®s->timer) << 16; flt = reg_esr & FLEXCAN_ESR_FLT_CONF_MASK; if (likely(flt == FLEXCAN_ESR_FLT_CONF_ACTIVE)) { @@ -650,7 +658,7 @@ static void flexcan_irq_state(struct net_device *dev, u32 reg_esr) if (unlikely(new_state == CAN_STATE_BUS_OFF)) can_bus_off(dev); - can_rx_offload_queue_tail(&priv->offload, skb); + can_rx_offload_queue_sorted(&priv->offload, skb, timestamp); } static inline struct flexcan_priv *rx_offload_to_priv(struct can_rx_offload *offload) From eb6984fa4ce2837dcb1f66720a600f31b0bb3739 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Fri, 9 Nov 2018 11:34:40 -0500 Subject: [PATCH 397/726] ext4: missing !bh check in ext4_xattr_inode_write() According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Signed-off-by: Vasily Averin Signed-off-by: Theodore Ts'o Cc: stable@kernel.org # 4.13 --- fs/ext4/xattr.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 0b9688683526..7643d52c776c 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1384,6 +1384,12 @@ retry: bh = ext4_getblk(handle, ea_inode, block, 0); if (IS_ERR(bh)) return PTR_ERR(bh); + if (!bh) { + WARN_ON_ONCE(1); + EXT4_ERROR_INODE(ea_inode, + "ext4_getblk() return bh = NULL"); + return -EFSCORRUPTED; + } ret = ext4_journal_get_write_access(handle, bh); if (ret) goto out; From c71bcdcb42a7493348d3b45dee8139843bf45efc Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Fri, 26 Oct 2018 09:36:58 -0700 Subject: [PATCH 398/726] i2c: add i2c bus driver for NVIDIA GPU Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta Reviewed-by: Andy Shevchenko [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-nvidia-gpu | 18 ++ MAINTAINERS | 7 + drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-nvidia-gpu.c | 368 ++++++++++++++++++++++++ 5 files changed, 403 insertions(+) create mode 100644 Documentation/i2c/busses/i2c-nvidia-gpu create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu new file mode 100644 index 000000000000..31884d2b2eb5 --- /dev/null +++ b/Documentation/i2c/busses/i2c-nvidia-gpu @@ -0,0 +1,18 @@ +Kernel driver i2c-nvidia-gpu + +Datasheet: not publicly available. + +Authors: + Ajay Gupta + +Description +----------- + +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing +and later GPUs and it is used to communicate with Type-C controller on GPUs. + +If your 'lspci -v' listing shows something like the following, + +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1) + +then this driver should support the I2C controller of your GPU. diff --git a/MAINTAINERS b/MAINTAINERS index 259fe9445d2f..1835d3ffd7ea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6861,6 +6861,13 @@ L: linux-acpi@vger.kernel.org S: Maintained F: drivers/i2c/i2c-core-acpi.c +I2C CONTROLLER DRIVER FOR NVIDIA GPU +M: Ajay Gupta +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-nvidia-gpu +F: drivers/i2c/busses/i2c-nvidia-gpu.c + I2C MUXES M: Peter Rosin L: linux-i2c@vger.kernel.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 77dc94b44011..f2c681971201 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985 This driver can also be built as a module. If so, the module will be called i2c-nforce2-s4985. +config I2C_NVIDIA_GPU + tristate "NVIDIA GPU I2C controller" + depends on PCI + help + If you say yes to this option, support will be included for the + NVIDIA GPU I2C controller which is used to communicate with the GPU's + Type-C controller. This driver can also be built as a module called + i2c-nvidia-gpu. + config I2C_SIS5595 tristate "SiS 5595" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 18b26af82b1c..5f0cb6915969 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_ISCH) += i2c-isch.o obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o +obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c new file mode 100644 index 000000000000..744f5e42636b --- /dev/null +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nvidia GPU I2C controller Driver + * + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* I2C definitions */ +#define I2C_MST_CNTL 0x00 +#define I2C_MST_CNTL_GEN_START BIT(0) +#define I2C_MST_CNTL_GEN_STOP BIT(1) +#define I2C_MST_CNTL_CMD_READ (1 << 2) +#define I2C_MST_CNTL_CMD_WRITE (2 << 2) +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6 +#define I2C_MST_CNTL_GEN_NACK BIT(28) +#define I2C_MST_CNTL_STATUS GENMASK(30, 29) +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29) +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29) +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29) +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29) +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31) + +#define I2C_MST_ADDR 0x04 + +#define I2C_MST_I2C0_TIMING 0x08 +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255 +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24) + +#define I2C_MST_DATA 0x0c + +#define I2C_MST_HYBRID_PADCTL 0x20 +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0) +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14) +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15) + +struct gpu_i2c_dev { + struct device *dev; + void __iomem *regs; + struct i2c_adapter adapter; + struct i2c_board_info *gpu_ccgx_ucsi; +}; + +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) +{ + u32 val; + + /* enable I2C */ + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL); + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C | + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV; + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL); + + /* enable 100KHZ mode */ + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ; + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT); + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK; + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); +} + +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) +{ + unsigned long target = jiffies + msecs_to_jiffies(1000); + u32 val; + + do { + val = readl(i2cd->regs + I2C_MST_CNTL); + if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER)) + break; + if ((val & I2C_MST_CNTL_STATUS) != + I2C_MST_CNTL_STATUS_BUS_BUSY) + break; + usleep_range(500, 600); + } while (time_is_after_jiffies(target)); + + if (time_is_before_jiffies(target)) { + dev_err(i2cd->dev, "i2c timeout error %x\n", val); + return -ETIME; + } + + val = readl(i2cd->regs + I2C_MST_CNTL); + switch (val & I2C_MST_CNTL_STATUS) { + case I2C_MST_CNTL_STATUS_OKAY: + return 0; + case I2C_MST_CNTL_STATUS_NO_ACK: + return -EIO; + case I2C_MST_CNTL_STATUS_TIMEOUT: + return -ETIME; + default: + return 0; + } +} + +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len) +{ + int status; + u32 val; + + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ | + (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) | + I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK; + writel(val, i2cd->regs + I2C_MST_CNTL); + + status = gpu_i2c_check_status(i2cd); + if (status < 0) + return status; + + val = readl(i2cd->regs + I2C_MST_DATA); + switch (len) { + case 1: + data[0] = val; + break; + case 2: + put_unaligned_be16(val, data); + break; + case 3: + put_unaligned_be16(val >> 8, data); + data[2] = val; + break; + case 4: + put_unaligned_be32(val, data); + break; + default: + break; + } + return status; +} + +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) +{ + writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL); + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) +{ + u32 val; + + writel(data, i2cd->regs + I2C_MST_DATA); + + val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT); + writel(val, i2cd->regs + I2C_MST_CNTL); + + return gpu_i2c_check_status(i2cd); +} + +static int gpu_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap); + int status, status2; + int i, j; + + /* + * The controller supports maximum 4 byte read due to known + * limitation of sending STOP after every read. + */ + for (i = 0; i < num; i++) { + if (msgs[i].flags & I2C_M_RD) { + /* program client address before starting read */ + writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR); + /* gpu_i2c_read has implicit start */ + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len); + if (status < 0) + goto stop; + } else { + u8 addr = i2c_8bit_addr_from_msg(msgs + i); + + status = gpu_i2c_start(i2cd); + if (status < 0) { + if (i == 0) + return status; + goto stop; + } + + status = gpu_i2c_write(i2cd, addr); + if (status < 0) + goto stop; + + for (j = 0; j < msgs[i].len; j++) { + status = gpu_i2c_write(i2cd, msgs[i].buf[j]); + if (status < 0) + goto stop; + } + } + } + status = gpu_i2c_stop(i2cd); + if (status < 0) + return status; + + return i; +stop: + status2 = gpu_i2c_stop(i2cd); + if (status2 < 0) + dev_err(i2cd->dev, "i2c stop failed %d\n", status2); + return status; +} + +static const struct i2c_adapter_quirks gpu_i2c_quirks = { + .max_read_len = 4, + .flags = I2C_AQ_COMB_WRITE_THEN_READ, +}; + +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm gpu_i2c_algorithm = { + .master_xfer = gpu_i2c_master_xfer, + .functionality = gpu_i2c_functionality, +}; + +/* + * This driver is for Nvidia GPU cards with USB Type-C interface. + * We want to identify the cards using vendor ID and class code only + * to avoid dependency of adding product id for any new card which + * requires this driver. + * Currently there is no class code defined for UCSI device over PCI + * so using UNKNOWN class for now and it will be updated when UCSI + * over PCI gets a class code. + * There is no other NVIDIA cards with UNKNOWN class code. Even if the + * driver gets loaded for an undesired card then eventually i2c_read() + * (initiated from UCSI i2c_client) will timeout or UCSI commands will + * timeout. + */ +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80 +static const struct pci_device_id gpu_i2c_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00}, + { } +}; +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids); + +static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) +{ + struct i2c_client *ccgx_client; + + i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev, + sizeof(*i2cd->gpu_ccgx_ucsi), + GFP_KERNEL); + if (!i2cd->gpu_ccgx_ucsi) + return -ENOMEM; + + strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi", + sizeof(i2cd->gpu_ccgx_ucsi->type)); + i2cd->gpu_ccgx_ucsi->addr = 0x8; + i2cd->gpu_ccgx_ucsi->irq = irq; + ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi); + if (!ccgx_client) + return -ENODEV; + + return 0; +} + +static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct gpu_i2c_dev *i2cd; + int status; + + i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL); + if (!i2cd) + return -ENOMEM; + + i2cd->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, i2cd); + + status = pcim_enable_device(pdev); + if (status < 0) { + dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status); + return status; + } + + pci_set_master(pdev); + + i2cd->regs = pcim_iomap(pdev, 0, 0); + if (!i2cd->regs) { + dev_err(&pdev->dev, "pcim_iomap failed\n"); + return -ENOMEM; + } + + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); + if (status < 0) { + dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status); + return status; + } + + gpu_enable_i2c_bus(i2cd); + + i2c_set_adapdata(&i2cd->adapter, i2cd); + i2cd->adapter.owner = THIS_MODULE; + strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter", + sizeof(i2cd->adapter.name)); + i2cd->adapter.algo = &gpu_i2c_algorithm; + i2cd->adapter.quirks = &gpu_i2c_quirks; + i2cd->adapter.dev.parent = &pdev->dev; + status = i2c_add_adapter(&i2cd->adapter); + if (status < 0) + goto free_irq_vectors; + + status = gpu_populate_client(i2cd, pdev->irq); + if (status < 0) { + dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status); + goto del_adapter; + } + + return 0; + +del_adapter: + i2c_del_adapter(&i2cd->adapter); +free_irq_vectors: + pci_free_irq_vectors(pdev); + return status; +} + +static void gpu_i2c_remove(struct pci_dev *pdev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev); + + i2c_del_adapter(&i2cd->adapter); + pci_free_irq_vectors(pdev); +} + +static int gpu_i2c_resume(struct device *dev) +{ + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev); + + gpu_enable_i2c_bus(i2cd); + return 0; +} + +UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); + +static struct pci_driver gpu_i2c_driver = { + .name = "nvidia-gpu", + .id_table = gpu_i2c_ids, + .probe = gpu_i2c_probe, + .remove = gpu_i2c_remove, + .driver = { + .pm = &gpu_i2c_driver_pm, + }, +}; + +module_pci_driver(gpu_i2c_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver"); +MODULE_LICENSE("GPL v2"); From caccdcc5dbec0dd9643fe1667893e78631a4d38e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 9 Nov 2018 17:54:38 +0100 Subject: [PATCH 399/726] i2c: nvidia-gpu: make pm_ops static sparse rightfully says: warning: symbol 'gpu_i2c_driver_pm' was not declared. Should it be static? Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nvidia-gpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index 744f5e42636b..8822357bca0c 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -349,7 +349,7 @@ static int gpu_i2c_resume(struct device *dev) return 0; } -UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); +static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL); static struct pci_driver gpu_i2c_driver = { .name = "nvidia-gpu", From 23d8003907d094f77cf959228e2248d6db819fa7 Mon Sep 17 00:00:00 2001 From: Stanislav Lisovskiy Date: Fri, 9 Nov 2018 11:00:12 +0200 Subject: [PATCH 400/726] drm/dp_mst: Check if primary mstb is null Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by: Lyude Paul Signed-off-by: Stanislav Lisovskiy Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 5ff1d79b86c4..0e0df398222d 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1275,6 +1275,9 @@ static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_ mutex_lock(&mgr->lock); mstb = mgr->mst_primary; + if (!mstb) + goto out; + for (i = 0; i < lct - 1; i++) { int shift = (i % 2) ? 0 : 4; int port_num = (rad[i / 2] >> shift) & 0xf; From 641a41dbba217ee5bd26abe6be77f8cead9cd00e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 30 Oct 2018 15:13:35 +0900 Subject: [PATCH 401/726] serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: # v4.11+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Ulrich Hecht Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e19bfbba8a01..effba6ce0caa 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_driver = { static int sci_remove(struct platform_device *dev) { struct sci_port *port = platform_get_drvdata(dev); + unsigned int type = port->port.type; /* uart_remove_... clears it */ sci_ports_in_use &= ~BIT(port->port.line); uart_remove_one_port(&sci_uart_driver, &port->port); @@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_device *dev) sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_trigger.attr); } - if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB || - port->port.type == PORT_HSCIF) { + if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) { sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_timeout.attr); } From 247c554a14aa16ca08f4ed4d9eb39a2389f69d1d Mon Sep 17 00:00:00 2001 From: Ajay Gupta Date: Fri, 26 Oct 2018 09:36:59 -0700 Subject: [PATCH 402/726] usb: typec: ucsi: add support for Cypress CCGx Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta Acked-by: Heikki Krogerus Signed-off-by: Wolfram Sang --- drivers/usb/typec/ucsi/Kconfig | 10 + drivers/usb/typec/ucsi/Makefile | 2 + drivers/usb/typec/ucsi/ucsi_ccg.c | 307 ++++++++++++++++++++++++++++++ 3 files changed, 319 insertions(+) create mode 100644 drivers/usb/typec/ucsi/ucsi_ccg.c diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig index e36d6c73c4a4..78118883f96c 100644 --- a/drivers/usb/typec/ucsi/Kconfig +++ b/drivers/usb/typec/ucsi/Kconfig @@ -23,6 +23,16 @@ config TYPEC_UCSI if TYPEC_UCSI +config UCSI_CCG + tristate "UCSI Interface Driver for Cypress CCGx" + depends on I2C + help + This driver enables UCSI support on platforms that expose a + Cypress CCGx Type-C controller over I2C interface. + + To compile the driver as a module, choose M here: the module will be + called ucsi_ccg. + config UCSI_ACPI tristate "UCSI ACPI Interface Driver" depends on ACPI diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile index 7afbea512207..2f4900b26210 100644 --- a/drivers/usb/typec/ucsi/Makefile +++ b/drivers/usb/typec/ucsi/Makefile @@ -8,3 +8,5 @@ typec_ucsi-y := ucsi.o typec_ucsi-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o + +obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c new file mode 100644 index 000000000000..de8a43bdff68 --- /dev/null +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UCSI driver for Cypress CCGx Type-C controller + * + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved. + * Author: Ajay Gupta + * + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c + */ +#include +#include +#include +#include +#include +#include + +#include +#include "ucsi.h" + +struct ucsi_ccg { + struct device *dev; + struct ucsi *ucsi; + struct ucsi_ppm ppm; + struct i2c_client *client; +}; + +#define CCGX_RAB_INTR_REG 0x06 +#define CCGX_RAB_UCSI_CONTROL 0x39 +#define CCGX_RAB_UCSI_CONTROL_START BIT(0) +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1) +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff)) + +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + const struct i2c_adapter_quirks *quirks = client->adapter->quirks; + unsigned char buf[2]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + .len = sizeof(buf), + .buf = buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = data, + }, + }; + u32 rlen, rem_len = len, max_read_len = len; + int status; + + /* check any max_read_len limitation on i2c adapter */ + if (quirks && quirks->max_read_len) + max_read_len = quirks->max_read_len; + + while (rem_len > 0) { + msgs[1].buf = &data[len - rem_len]; + rlen = min_t(u16, rem_len, max_read_len); + msgs[1].len = rlen; + put_unaligned_le16(rab, buf); + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + return status; + } + rab += rlen; + rem_len -= rlen; + } + + return 0; +} + +static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) +{ + struct i2c_client *client = uc->client; + unsigned char *buf; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0x0, + } + }; + int status; + + buf = kzalloc(len + sizeof(rab), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + put_unaligned_le16(rab, buf); + memcpy(buf + sizeof(rab), data, len); + + msgs[0].len = len + sizeof(rab); + msgs[0].buf = buf; + + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (status < 0) { + dev_err(uc->dev, "i2c_transfer failed %d\n", status); + kfree(buf); + return status; + } + + kfree(buf); + return 0; +} + +static int ucsi_ccg_init(struct ucsi_ccg *uc) +{ + unsigned int count = 10; + u8 data; + int status; + + data = CCGX_RAB_UCSI_CONTROL_STOP; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + data = CCGX_RAB_UCSI_CONTROL_START; + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); + if (status < 0) + return status; + + /* + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control + * register write will push response which must be cleared. + */ + do { + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + if (!data) + return 0; + + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + usleep_range(10000, 11000); + } while (--count); + + return -ETIMEDOUT; +} + +static int ucsi_ccg_send_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out)); + status = ccg_write(uc, rab, ppm + + offsetof(struct ucsi_data, message_out), + sizeof(uc->ppm.data->message_out)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl)); + return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl), + sizeof(uc->ppm.data->ctrl)); +} + +static int ucsi_ccg_recv_data(struct ucsi_ccg *uc) +{ + u8 *ppm = (u8 *)uc->ppm.data; + int status; + u16 rab; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci)); + status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci), + sizeof(uc->ppm.data->cci)); + if (status < 0) + return status; + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in)); + return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in), + sizeof(uc->ppm.data->message_in)); +} + +static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc) +{ + int status; + unsigned char data; + + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); + if (status < 0) + return status; + + return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); +} + +static int ucsi_ccg_sync(struct ucsi_ppm *ppm) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + int status; + + status = ucsi_ccg_recv_data(uc); + if (status < 0) + return status; + + /* ack interrupt to allow next command to run */ + return ucsi_ccg_ack_interrupt(uc); +} + +static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl) +{ + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); + + ppm->data->ctrl.raw_cmd = ctrl->raw_cmd; + return ucsi_ccg_send_data(uc); +} + +static irqreturn_t ccg_irq_handler(int irq, void *data) +{ + struct ucsi_ccg *uc = data; + + ucsi_notify(uc->ucsi); + + return IRQ_HANDLED; +} + +static int ucsi_ccg_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ucsi_ccg *uc; + int status; + u16 rab; + + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL); + if (!uc) + return -ENOMEM; + + uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL); + if (!uc->ppm.data) + return -ENOMEM; + + uc->ppm.cmd = ucsi_ccg_cmd; + uc->ppm.sync = ucsi_ccg_sync; + uc->dev = dev; + uc->client = client; + + /* reset ccg device and initialize ucsi */ + status = ucsi_ccg_init(uc); + if (status < 0) { + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status); + return status; + } + + status = devm_request_threaded_irq(dev, client->irq, NULL, + ccg_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + dev_name(dev), uc); + if (status < 0) { + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status); + return status; + } + + uc->ucsi = ucsi_register_ppm(dev, &uc->ppm); + if (IS_ERR(uc->ucsi)) { + dev_err(uc->dev, "ucsi_register_ppm failed\n"); + return PTR_ERR(uc->ucsi); + } + + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version)); + status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) + + offsetof(struct ucsi_data, version), + sizeof(uc->ppm.data->version)); + if (status < 0) { + ucsi_unregister_ppm(uc->ucsi); + return status; + } + + i2c_set_clientdata(client, uc); + return 0; +} + +static int ucsi_ccg_remove(struct i2c_client *client) +{ + struct ucsi_ccg *uc = i2c_get_clientdata(client); + + ucsi_unregister_ppm(uc->ucsi); + + return 0; +} + +static const struct i2c_device_id ucsi_ccg_device_id[] = { + {"ccgx-ucsi", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id); + +static struct i2c_driver ucsi_ccg_driver = { + .driver = { + .name = "ucsi_ccg", + }, + .probe = ucsi_ccg_probe, + .remove = ucsi_ccg_remove, + .id_table = ucsi_ccg_device_id, +}; + +module_i2c_driver(ucsi_ccg_driver); + +MODULE_AUTHOR("Ajay Gupta "); +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller"); +MODULE_LICENSE("GPL v2"); From 15035388439f892017d38b05214d3cda6578af64 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Fri, 9 Nov 2018 15:22:07 -0500 Subject: [PATCH 403/726] x86/cpu/vmware: Do not trace vmware_sched_clock() When running function tracing on a Linux guest running on VMware Workstation, the guest would crash. This is due to tracing of the sched_clock internal call of the VMware vmware_sched_clock(), which causes an infinite recursion within the tracing code (clock calls must not be traced). Make vmware_sched_clock() not traced by ftrace. Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock") Reported-by: GwanYeong Kim Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Borislav Petkov CC: Alok Kataria CC: GwanYeong Kim CC: "H. Peter Anvin" CC: Ingo Molnar Cc: stable@vger.kernel.org CC: Thomas Gleixner CC: virtualization@lists.linux-foundation.org CC: x86-ml Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home --- arch/x86/kernel/cpu/vmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index d9ab49bed8af..0eda91f8eeac 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -77,7 +77,7 @@ static __init int setup_vmw_sched_clock(char *s) } early_param("no-vmw-sched-clock", setup_vmw_sched_clock); -static unsigned long long vmware_sched_clock(void) +static unsigned long long notrace vmware_sched_clock(void) { unsigned long long ns; From 1aefa98b010e9cc7a07046cbcb1237ddad85b708 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 9 Nov 2018 15:20:54 +0530 Subject: [PATCH 404/726] clk: qcom: gcc: Fix board clock node name Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-qcs404.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c index e4ca6a45f313..ef1b267cb058 100644 --- a/drivers/clk/qcom/gcc-qcs404.c +++ b/drivers/clk/qcom/gcc-qcs404.c @@ -265,7 +265,7 @@ static struct clk_fixed_factor cxo = { .div = 1, .hw.init = &(struct clk_init_data){ .name = "cxo", - .parent_names = (const char *[]){ "xo_board" }, + .parent_names = (const char *[]){ "xo-board" }, .num_parents = 1, .ops = &clk_fixed_factor_ops, }, From 35e8e8b45d31bec34379dd36e7b71448e003efb2 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 9 Nov 2018 11:53:56 +0000 Subject: [PATCH 405/726] net: aquantia: synchronized flow control between mac/phy Flow control statuses were not synchronized between blocks, that caused packets/link drop on some corner cases, when MAC sent PFC although Phy was not expecting these to come. Driver should readout the negotiated FC from phy and configure RX block accordigly. This is done on each link change event with information from FW. Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- .../ethernet/aquantia/atlantic/aq_ethtool.c | 8 +++---- .../net/ethernet/aquantia/atlantic/aq_hw.h | 3 +++ .../net/ethernet/aquantia/atlantic/aq_nic.c | 14 ++++++++++++- .../aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 ++++++++--- .../atlantic/hw_atl/hw_atl_utils_fw2x.c | 21 +++++++++++++++++++ 5 files changed, 50 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c index 6a633c70f603..99ef1daaa4d8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c @@ -407,13 +407,13 @@ static void aq_ethtool_get_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *pause) { struct aq_nic_s *aq_nic = netdev_priv(ndev); + u32 fc = aq_nic->aq_nic_cfg.flow_control; pause->autoneg = 0; - if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_RX) - pause->rx_pause = 1; - if (aq_nic->aq_hw->aq_nic_cfg->flow_control & AQ_NIC_FC_TX) - pause->tx_pause = 1; + pause->rx_pause = !!(fc & AQ_NIC_FC_RX); + pause->tx_pause = !!(fc & AQ_NIC_FC_TX); + } static int aq_ethtool_set_pauseparam(struct net_device *ndev, diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index e8689241204e..7ec8d24b2b0b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -204,6 +204,7 @@ struct aq_hw_ops { int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); + int (*hw_set_fc)(struct aq_hw_s *self, u32 fc, u32 tc); }; struct aq_fw_ops { @@ -226,6 +227,8 @@ struct aq_fw_ops { int (*update_stats)(struct aq_hw_s *self); + u32 (*get_flow_control)(struct aq_hw_s *self, u32 *fcmode); + int (*set_flow_control)(struct aq_hw_s *self); int (*set_power)(struct aq_hw_s *self, unsigned int power_state, diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 5fed24446687..0011a3f2f672 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -124,6 +124,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self) static int aq_nic_update_link_status(struct aq_nic_s *self) { int err = self->aq_fw_ops->update_link_status(self->aq_hw); + u32 fc = 0; if (err) return err; @@ -133,6 +134,15 @@ static int aq_nic_update_link_status(struct aq_nic_s *self) AQ_CFG_DRV_NAME, self->link_status.mbps, self->aq_hw->aq_link_status.mbps); aq_nic_update_interrupt_moderation_settings(self); + + /* Driver has to update flow control settings on RX block + * on any link event. + * We should query FW whether it negotiated FC. + */ + if (self->aq_fw_ops->get_flow_control) + self->aq_fw_ops->get_flow_control(self->aq_hw, &fc); + if (self->aq_hw_ops->hw_set_fc) + self->aq_hw_ops->hw_set_fc(self->aq_hw, fc, 0); } self->link_status = self->aq_hw->aq_link_status; @@ -772,7 +782,9 @@ void aq_nic_get_link_ksettings(struct aq_nic_s *self, ethtool_link_ksettings_add_link_mode(cmd, advertising, Pause); - if (self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX) + /* Asym is when either RX or TX, but not both */ + if (!!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_TX) ^ + !!(self->aq_nic_cfg.flow_control & AQ_NIC_FC_RX)) ethtool_link_ksettings_add_link_mode(cmd, advertising, Asym_Pause); diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 76d25d594a0f..119265762b0c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -100,12 +100,17 @@ static int hw_atl_b0_hw_reset(struct aq_hw_s *self) return err; } +static int hw_atl_b0_set_fc(struct aq_hw_s *self, u32 fc, u32 tc) +{ + hw_atl_rpb_rx_xoff_en_per_tc_set(self, !!(fc & AQ_NIC_FC_RX), tc); + return 0; +} + static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) { u32 tc = 0U; u32 buff_size = 0U; unsigned int i_priority = 0U; - bool is_rx_flow_control = false; /* TPS Descriptor rate init */ hw_atl_tps_tx_pkt_shed_desc_rate_curr_time_res_set(self, 0x0U); @@ -138,7 +143,6 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) /* QoS Rx buf size per TC */ tc = 0; - is_rx_flow_control = (AQ_NIC_FC_RX & self->aq_nic_cfg->flow_control); buff_size = HW_ATL_B0_RXBUF_MAX; hw_atl_rpb_rx_pkt_buff_size_per_tc_set(self, buff_size, tc); @@ -150,7 +154,8 @@ static int hw_atl_b0_hw_qos_set(struct aq_hw_s *self) (buff_size * (1024U / 32U) * 50U) / 100U, tc); - hw_atl_rpb_rx_xoff_en_per_tc_set(self, is_rx_flow_control ? 1U : 0U, tc); + + hw_atl_b0_set_fc(self, self->aq_nic_cfg->flow_control, tc); /* QoS 802.1p priority -> TC mapping */ for (i_priority = 8U; i_priority--;) @@ -963,4 +968,5 @@ const struct aq_hw_ops hw_atl_ops_b0 = { .hw_get_regs = hw_atl_utils_hw_get_regs, .hw_get_hw_stats = hw_atl_utils_get_hw_stats, .hw_get_fw_version = hw_atl_utils_get_fw_version, + .hw_set_fc = hw_atl_b0_set_fc, }; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c index 096ca5730887..7de3220d9cab 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c @@ -30,6 +30,8 @@ #define HW_ATL_FW2X_MPI_STATE_ADDR 0x370 #define HW_ATL_FW2X_MPI_STATE2_ADDR 0x374 +#define HW_ATL_FW2X_CAP_PAUSE BIT(CAPS_HI_PAUSE) +#define HW_ATL_FW2X_CAP_ASYM_PAUSE BIT(CAPS_HI_ASYMMETRIC_PAUSE) #define HW_ATL_FW2X_CAP_SLEEP_PROXY BIT(CAPS_HI_SLEEP_PROXY) #define HW_ATL_FW2X_CAP_WOL BIT(CAPS_HI_WOL) @@ -451,6 +453,24 @@ static int aq_fw2x_set_flow_control(struct aq_hw_s *self) return 0; } +static u32 aq_fw2x_get_flow_control(struct aq_hw_s *self, u32 *fcmode) +{ + u32 mpi_state = aq_hw_read_reg(self, HW_ATL_FW2X_MPI_STATE2_ADDR); + + if (mpi_state & HW_ATL_FW2X_CAP_PAUSE) + if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE) + *fcmode = AQ_NIC_FC_RX; + else + *fcmode = AQ_NIC_FC_RX | AQ_NIC_FC_TX; + else + if (mpi_state & HW_ATL_FW2X_CAP_ASYM_PAUSE) + *fcmode = AQ_NIC_FC_TX; + else + *fcmode = 0; + + return 0; +} + const struct aq_fw_ops aq_fw_2x_ops = { .init = aq_fw2x_init, .deinit = aq_fw2x_deinit, @@ -465,4 +485,5 @@ const struct aq_fw_ops aq_fw_2x_ops = { .set_eee_rate = aq_fw2x_set_eee_rate, .get_eee_rate = aq_fw2x_get_eee_rate, .set_flow_control = aq_fw2x_set_flow_control, + .get_flow_control = aq_fw2x_get_flow_control }; From 7a1bb49461b12b2e6332a4d054256835f45203f3 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:53:57 +0000 Subject: [PATCH 406/726] net: aquantia: fix potential IOMMU fault after driver unbind IOMMU fault may occurr on unbind/bind or if_down/if_up sequence. Although driver disables the rings on down, this is not enough. Due to internal HW design, during subsequent initialization NIC sometimes may reuse RX descriptors cache and write to the host memory from the descriptor cache. That's get catched by IOMMU on host. This patch invalidates the descriptor cache in NIC on interface down to prevent writing to the cached descriptors and to the memory pointed in those descriptors. Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- .../aquantia/atlantic/hw_atl/hw_atl_b0.c | 6 ++++++ .../aquantia/atlantic/hw_atl/hw_atl_llh.c | 8 ++++++++ .../aquantia/atlantic/hw_atl/hw_atl_llh.h | 3 +++ .../atlantic/hw_atl/hw_atl_llh_internal.h | 18 ++++++++++++++++++ 4 files changed, 35 insertions(+) diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 119265762b0c..3aec56623bf5 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -920,6 +920,12 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self) static int hw_atl_b0_hw_stop(struct aq_hw_s *self) { hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK); + + /* Invalidate Descriptor Cache to prevent writing to the cached + * descriptors and to the data pointer of those descriptors + */ + hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1); + return aq_hw_err_from_flags(self); } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c index be0a3a90dfad..5502ec5f0f69 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c @@ -619,6 +619,14 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(struct aq_hw_s *aq_hw, u32 rx_flow_ctl_mode HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode); } +void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init) +{ + aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT, + init); +} + void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_pkt_buff_size_per_tc, u32 buffer) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h index 7056c7342afc..41f239928c15 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h @@ -325,6 +325,9 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_pkt_buff_size_per_tc, u32 buffer); +/* set rdm rx dma descriptor cache init */ +void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init); + /* set rx xoff enable (per tc) */ void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc, u32 buffer); diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h index 716674a9b729..a715fa317b1c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -293,6 +293,24 @@ /* default value of bitfield desc{d}_reset */ #define HW_ATL_RDM_DESCDRESET_DEFAULT 0x0 +/* rdm_desc_init_i bitfield definitions + * preprocessor definitions for the bitfield rdm_desc_init_i. + * port="pif_rdm_desc_init_i" + */ + +/* register address for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR 0x00005a00 +/* bitmask for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK 0xffffffff +/* inverted bitmask for bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSKN 0x00000000 +/* lower bit position of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT 0 +/* width of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_WIDTH 32 +/* default value of bitfield rdm_desc_init_i */ +#define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0 + /* rx int_desc_wrb_en bitfield definitions * preprocessor definitions for the bitfield "int_desc_wrb_en". * port="pif_rdm_int_desc_wrb_en_i" From bfaa9f8553d5c20703781e63f4fc8cb4792f18fd Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 9 Nov 2018 11:53:59 +0000 Subject: [PATCH 407/726] net: aquantia: fixed enable unicast on 32 macvlan Fixed a condition mistake due to which macvlans unicast item number 32 was not added in the unicast filter. The consequence is that when exactly 32 macvlans are created on NIC, the last created macvlan receives no traffic because its MAC was not registered in HW. Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling") Signed-off-by: Igor Russkikh Tested-by: Nikita Danilov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 0011a3f2f672..b5e7c98f424c 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -600,7 +600,7 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) } } - if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) { + if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) { packet_filter |= IFF_MULTICAST; self->mc_list.count = i; self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, From ad703c2b9127f9acdef697ec4755f6da4beaa266 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:54:01 +0000 Subject: [PATCH 408/726] net: aquantia: invalid checksumm offload implementation Packets with marked invalid IP/UDP/TCP checksums were considered as good by the driver. The error was in a logic, processing offload bits in RX descriptor. Signed-off-by: Igor Russkikh Signed-off-by: Dmitry Bogdanov Signed-off-by: David S. Miller --- .../net/ethernet/aquantia/atlantic/aq_ring.c | 35 +++++++++++------- .../aquantia/atlantic/hw_atl/hw_atl_b0.c | 36 +++++++++---------- 2 files changed, 41 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 3db91446cc67..74550ccc7a20 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -172,6 +172,27 @@ bool aq_ring_tx_clean(struct aq_ring_s *self) return !!budget; } +static void aq_rx_checksum(struct aq_ring_s *self, + struct aq_ring_buff_s *buff, + struct sk_buff *skb) +{ + if (!(self->aq_nic->ndev->features & NETIF_F_RXCSUM)) + return; + + if (unlikely(buff->is_cso_err)) { + ++self->stats.rx.errors; + skb->ip_summed = CHECKSUM_NONE; + return; + } + if (buff->is_ip_cso) { + __skb_incr_checksum_unnecessary(skb); + if (buff->is_udp_cso || buff->is_tcp_cso) + __skb_incr_checksum_unnecessary(skb); + } else { + skb->ip_summed = CHECKSUM_NONE; + } +} + #define AQ_SKB_ALIGN SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) int aq_ring_rx_clean(struct aq_ring_s *self, struct napi_struct *napi, @@ -267,18 +288,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self, } skb->protocol = eth_type_trans(skb, ndev); - if (unlikely(buff->is_cso_err)) { - ++self->stats.rx.errors; - skb->ip_summed = CHECKSUM_NONE; - } else { - if (buff->is_ip_cso) { - __skb_incr_checksum_unnecessary(skb); - if (buff->is_udp_cso || buff->is_tcp_cso) - __skb_incr_checksum_unnecessary(skb); - } else { - skb->ip_summed = CHECKSUM_NONE; - } - } + + aq_rx_checksum(self, buff, skb); skb_set_hash(skb, buff->rss_hash, buff->is_hash_l4 ? PKT_HASH_TYPE_L4 : diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 3aec56623bf5..179ce12fe4d8 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -660,9 +660,9 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self, struct hw_atl_rxd_wb_s *rxd_wb = (struct hw_atl_rxd_wb_s *) &ring->dx_ring[ring->hw_head * HW_ATL_B0_RXD_SIZE]; - unsigned int is_err = 1U; unsigned int is_rx_check_sum_enabled = 0U; unsigned int pkt_type = 0U; + u8 rx_stat = 0U; if (!(rxd_wb->status & 0x1U)) { /* RxD is not done */ break; @@ -670,35 +670,35 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self, buff = &ring->buff_ring[ring->hw_head]; - is_err = (0x0000003CU & rxd_wb->status); + rx_stat = (0x0000003CU & rxd_wb->status) >> 2; is_rx_check_sum_enabled = (rxd_wb->type) & (0x3U << 19); - is_err &= ~0x20U; /* exclude validity bit */ pkt_type = 0xFFU & (rxd_wb->type >> 4); - if (is_rx_check_sum_enabled) { - if (0x0U == (pkt_type & 0x3U)) - buff->is_ip_cso = (is_err & 0x08U) ? 0U : 1U; + if (is_rx_check_sum_enabled & BIT(0) && + (0x0U == (pkt_type & 0x3U))) + buff->is_ip_cso = (rx_stat & BIT(1)) ? 0U : 1U; + if (is_rx_check_sum_enabled & BIT(1)) { if (0x4U == (pkt_type & 0x1CU)) - buff->is_udp_cso = buff->is_cso_err ? 0U : 1U; + buff->is_udp_cso = (rx_stat & BIT(2)) ? 0U : + !!(rx_stat & BIT(3)); else if (0x0U == (pkt_type & 0x1CU)) - buff->is_tcp_cso = buff->is_cso_err ? 0U : 1U; - - /* Checksum offload workaround for small packets */ - if (rxd_wb->pkt_len <= 60) { - buff->is_ip_cso = 0U; - buff->is_cso_err = 0U; - } + buff->is_tcp_cso = (rx_stat & BIT(2)) ? 0U : + !!(rx_stat & BIT(3)); + } + buff->is_cso_err = !!(rx_stat & 0x6); + /* Checksum offload workaround for small packets */ + if (unlikely(rxd_wb->pkt_len <= 60)) { + buff->is_ip_cso = 0U; + buff->is_cso_err = 0U; } - - is_err &= ~0x18U; dma_unmap_page(ndev, buff->pa, buff->len, DMA_FROM_DEVICE); - if (is_err || rxd_wb->type & 0x1000U) { - /* status error or DMA error */ + if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) { + /* MAC error or DMA error */ buff->is_error = 1U; } else { if (self->aq_nic_cfg->is_rss) { From bbb67a44baf973da734b9fd61cba4211da240751 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 9 Nov 2018 11:54:03 +0000 Subject: [PATCH 409/726] net: aquantia: allow rx checksum offload configuration RX Checksum offloads could not be configured and ignored netdev features flag for checksumming. Signed-off-by: Igor Russkikh Signed-off-by: Dmitry Bogdanov Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 3 +++ drivers/net/ethernet/aquantia/atlantic/aq_main.c | 10 ++++++++-- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 7 +++++-- 5 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index 7ec8d24b2b0b..a1e70da358ca 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -204,6 +204,9 @@ struct aq_hw_ops { int (*hw_get_fw_version)(struct aq_hw_s *self, u32 *fw_version); + int (*hw_set_offload)(struct aq_hw_s *self, + struct aq_nic_cfg_s *aq_nic_cfg); + int (*hw_set_fc)(struct aq_hw_s *self, u32 fc, u32 tc); }; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index e3ae29e523f0..7c07eef275eb 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -99,8 +99,11 @@ static int aq_ndev_set_features(struct net_device *ndev, struct aq_nic_s *aq_nic = netdev_priv(ndev); struct aq_nic_cfg_s *aq_cfg = aq_nic_get_cfg(aq_nic); bool is_lro = false; + int err = 0; - if (aq_cfg->hw_features & NETIF_F_LRO) { + aq_cfg->features = features; + + if (aq_cfg->aq_hw_caps->hw_features & NETIF_F_LRO) { is_lro = features & NETIF_F_LRO; if (aq_cfg->is_lro != is_lro) { @@ -112,8 +115,11 @@ static int aq_ndev_set_features(struct net_device *ndev, } } } + if ((aq_nic->ndev->features ^ features) & NETIF_F_RXCSUM) + err = aq_nic->aq_hw_ops->hw_set_offload(aq_nic->aq_hw, + aq_cfg); - return 0; + return err; } static int aq_ndev_set_mac_address(struct net_device *ndev, void *addr) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index b5e7c98f424c..7abdc0952425 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -118,7 +118,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self) } cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk; - cfg->hw_features = cfg->aq_hw_caps->hw_features; + cfg->features = cfg->aq_hw_caps->hw_features; } static int aq_nic_update_link_status(struct aq_nic_s *self) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index c1582f4e8e1b..44ec47a3d60a 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -23,7 +23,7 @@ struct aq_vec_s; struct aq_nic_cfg_s { const struct aq_hw_caps_s *aq_hw_caps; - u64 hw_features; + u64 features; u32 rxds; /* rx ring size, descriptors # */ u32 txds; /* tx ring size, descriptors # */ u32 vecs; /* vecs==allocated irqs */ diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 179ce12fe4d8..f02592f43fe3 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -234,8 +234,10 @@ static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self, hw_atl_tpo_tcp_udp_crc_offload_en_set(self, 1); /* RX checksums offloads*/ - hw_atl_rpo_ipv4header_crc_offload_en_set(self, 1); - hw_atl_rpo_tcp_udp_crc_offload_en_set(self, 1); + hw_atl_rpo_ipv4header_crc_offload_en_set(self, !!(aq_nic_cfg->features & + NETIF_F_RXCSUM)); + hw_atl_rpo_tcp_udp_crc_offload_en_set(self, !!(aq_nic_cfg->features & + NETIF_F_RXCSUM)); /* LSO offloads*/ hw_atl_tdm_large_send_offload_en_set(self, 0xFFFFFFFFU); @@ -974,5 +976,6 @@ const struct aq_hw_ops hw_atl_ops_b0 = { .hw_get_regs = hw_atl_utils_hw_get_regs, .hw_get_hw_stats = hw_atl_utils_get_hw_stats, .hw_get_fw_version = hw_atl_utils_get_fw_version, + .hw_set_offload = hw_atl_b0_hw_offload_set, .hw_set_fc = hw_atl_b0_set_fc, }; From d02854dc1999ed3e7fd79ec700c64ac23ac0c458 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Fri, 9 Nov 2018 18:56:27 -0700 Subject: [PATCH 410/726] net: qualcomm: rmnet: Fix incorrect assignment of real_dev A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by: Sean Tranchetti Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c index 0afc3d335d56..d11c16aeb19a 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c @@ -234,7 +234,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, struct net_device *real_dev, struct rmnet_endpoint *ep) { - struct rmnet_priv *priv; + struct rmnet_priv *priv = netdev_priv(rmnet_dev); int rc; if (ep->egress_dev) @@ -247,6 +247,8 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, rmnet_dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; rmnet_dev->hw_features |= NETIF_F_SG; + priv->real_dev = real_dev; + rc = register_netdevice(rmnet_dev); if (!rc) { ep->egress_dev = rmnet_dev; @@ -255,9 +257,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev, rmnet_dev->rtnl_link_ops = &rmnet_link_ops; - priv = netdev_priv(rmnet_dev); priv->mux_id = id; - priv->real_dev = real_dev; netdev_dbg(rmnet_dev, "rmnet dev created\n"); } From 62230715fd2453b3ba948c9d83cfb3ada9169169 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=EB=B0=B0=EC=84=9D=EC=A7=84?= Date: Fri, 9 Nov 2018 16:53:06 -0800 Subject: [PATCH 411/726] flow_dissector: do not dissect l4 ports for fragments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed3741 ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/flow_dissector.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 676f3ad629f9..588f475019d4 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -1166,8 +1166,8 @@ ip_proto_again: break; } - if (dissector_uses_key(flow_dissector, - FLOW_DISSECTOR_KEY_PORTS)) { + if (dissector_uses_key(flow_dissector, FLOW_DISSECTOR_KEY_PORTS) && + !(key_control->flags & FLOW_DIS_IS_FRAGMENT)) { key_ports = skb_flow_dissector_target(flow_dissector, FLOW_DISSECTOR_KEY_PORTS, target_container); From fbd1d5245372e48b494120a30fe0b34b304576c4 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 9 Nov 2018 17:37:20 +0100 Subject: [PATCH 412/726] net: mvneta: correct typo The reserved variable should be named reserved1. Signed-off-by: Alexandre Belloni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 5bfd349bf41a..3ba672e9e353 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -494,7 +494,7 @@ struct mvneta_port { #if defined(__LITTLE_ENDIAN) struct mvneta_tx_desc { u32 command; /* Options used by HW for packet transmitting.*/ - u16 reserverd1; /* csum_l4 (for future use) */ + u16 reserved1; /* csum_l4 (for future use) */ u16 data_size; /* Data size of transmitted packet in bytes */ u32 buf_phys_addr; /* Physical addr of transmitted buffer */ u32 reserved2; /* hw_cmd - (for future use, PMT) */ @@ -519,7 +519,7 @@ struct mvneta_rx_desc { #else struct mvneta_tx_desc { u16 data_size; /* Data size of transmitted packet in bytes */ - u16 reserverd1; /* csum_l4 (for future use) */ + u16 reserved1; /* csum_l4 (for future use) */ u32 command; /* Options used by HW for packet transmitting.*/ u32 reserved2; /* hw_cmd - (for future use, PMT) */ u32 buf_phys_addr; /* Physical addr of transmitted buffer */ From de7b75d82f70c5469675b99ad632983c50b6f7e7 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 9 Nov 2018 15:58:40 -0700 Subject: [PATCH 413/726] floppy: fix race condition in __floppy_read_block_0() LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1 #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bba5ef ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index a8cfa011c284..fb23578e9a41 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4148,10 +4148,11 @@ static int __floppy_read_block_0(struct block_device *bdev, int drive) bio.bi_end_io = floppy_rb0_cb; bio_set_op_attrs(&bio, REQ_OP_READ, 0); + init_completion(&cbdata.complete); + submit_bio(&bio); process_fd_request(); - init_completion(&cbdata.complete); wait_for_completion(&cbdata.complete); __free_page(page); From 3fa58dcab50a0aa16817f16a8d38aee869eb3fb9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Nov 2018 00:30:22 -0700 Subject: [PATCH 414/726] acpi, nfit: Fix ARS overflow continuation When the platform BIOS is unable to report all the media error records it requires the OS to restart the scrub at a prescribed location. The driver detects the overflow condition, but then fails to report it to the ARS state machine after reaping the records. Propagate -ENOSPC correctly to continue the ARS operation. Cc: Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reported-by: Jacek Zloch Reviewed-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index f8c638f3c946..5970b8f5f768 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -2928,9 +2928,9 @@ static int acpi_nfit_query_poison(struct acpi_nfit_desc *acpi_desc) return rc; if (ars_status_process_records(acpi_desc)) - return -ENOMEM; + dev_err(acpi_desc->dev, "Failed to process ARS records\n"); - return 0; + return rc; } static int ars_register(struct acpi_nfit_desc *acpi_desc, From 2121db09630113e67b51ae78c18115f1858f648a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 3 Nov 2018 17:53:09 -0700 Subject: [PATCH 415/726] Revert "acpi, nfit: Further restrict userspace ARS start requests" The following lockdep splat results from acquiring the init_mutex in acpi_nfit_clear_to_send(): WARNING: possible circular locking dependency detected lt-daxdev-error/7216 is trying to acquire lock: 00000000f694db15 (&acpi_desc->init_mutex){+.+.}, at: acpi_nfit_clear_to_send+0x27/0x80 [nfit] but task is already holding lock: 00000000182298f2 (&nvdimm_bus->reconfig_mutex){+.+.}, at: __nd_ioctl+0x457/0x610 [libnvdimm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&nvdimm_bus->reconfig_mutex){+.+.}: nvdimm_badblocks_populate+0x41/0x150 [libnvdimm] nd_region_notify+0x95/0xb0 [libnvdimm] nd_device_notify+0x40/0x50 [libnvdimm] ars_complete+0x7f/0xd0 [nfit] acpi_nfit_scrub+0xbb/0x410 [nfit] process_one_work+0x22b/0x5c0 worker_thread+0x3c/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 -> #0 (&acpi_desc->init_mutex){+.+.}: __mutex_lock+0x83/0x980 acpi_nfit_clear_to_send+0x27/0x80 [nfit] __nd_ioctl+0x474/0x610 [libnvdimm] nd_ioctl+0xa4/0xb0 [libnvdimm] do_vfs_ioctl+0xa5/0x6e0 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe New infrastructure is needed to be able to perform this check without acquiring the lock. Fixes: 594861215c83 ("acpi, nfit: Further restrict userspace ARS start") Cc: Dave Jiang Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 5970b8f5f768..14d9f5bea015 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -3341,8 +3341,6 @@ static int acpi_nfit_clear_to_send(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, unsigned int cmd) { struct acpi_nfit_desc *acpi_desc = to_acpi_nfit_desc(nd_desc); - struct nfit_spa *nfit_spa; - int rc = 0; if (nvdimm) return 0; @@ -3355,17 +3353,10 @@ static int acpi_nfit_clear_to_send(struct nvdimm_bus_descriptor *nd_desc, * just needs guarantees that any ARS it initiates are not * interrupted by any intervening start requests from userspace. */ - mutex_lock(&acpi_desc->init_mutex); - list_for_each_entry(nfit_spa, &acpi_desc->spas, list) - if (acpi_desc->scrub_spa - || test_bit(ARS_REQ_SHORT, &nfit_spa->ars_state) - || test_bit(ARS_REQ_LONG, &nfit_spa->ars_state)) { - rc = -EBUSY; - break; - } - mutex_unlock(&acpi_desc->init_mutex); + if (work_busy(&acpi_desc->dwork.work)) + return -EBUSY; - return rc; + return 0; } int acpi_nfit_ars_rescan(struct acpi_nfit_desc *acpi_desc, From 63c82997f5c0f3e1b914af43d82f712a86bc5f3a Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 9 Nov 2018 21:06:26 -0800 Subject: [PATCH 416/726] net: sched: cls_flower: validate nested enc_opts_policy to avoid warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only currently contain further nested attributes, which are parsed by hand, so the policy is never actually used resulting in a W=1 build warning: net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=] enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = { Add the validation anyway to avoid potential bugs when other attributes are added and to make the attribute structure slightly more clear. Validation will also set extact to point to bad attribute on error. Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Jakub Kicinski Acked-by: Simon Horman Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- net/sched/cls_flower.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index 9aada2d0ef06..c6c327874abc 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -709,11 +709,23 @@ static int fl_set_enc_opt(struct nlattr **tb, struct fl_flow_key *key, struct netlink_ext_ack *extack) { const struct nlattr *nla_enc_key, *nla_opt_key, *nla_opt_msk = NULL; - int option_len, key_depth, msk_depth = 0; + int err, option_len, key_depth, msk_depth = 0; + + err = nla_validate_nested(tb[TCA_FLOWER_KEY_ENC_OPTS], + TCA_FLOWER_KEY_ENC_OPTS_MAX, + enc_opts_policy, extack); + if (err) + return err; nla_enc_key = nla_data(tb[TCA_FLOWER_KEY_ENC_OPTS]); if (tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]) { + err = nla_validate_nested(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK], + TCA_FLOWER_KEY_ENC_OPTS_MAX, + enc_opts_policy, extack); + if (err) + return err; + nla_opt_msk = nla_data(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]); msk_depth = nla_len(tb[TCA_FLOWER_KEY_ENC_OPTS_MASK]); } From 6bbe4385d035c6fac56f840a59861a0310ce137b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 5 Nov 2018 17:19:36 +0900 Subject: [PATCH 417/726] kconfig: merge_config: avoid false positive matches from comment lines The current SED_CONFIG_EXP could match to comment lines in config fragment files, especially when CONFIG_PREFIX_ is empty. For example, Buildroot uses empty prefixing; starting symbols with BR2_ is just convention. Make the sed expression more robust against false positives from comment lines. The new sed expression matches to only valid patterns. Signed-off-by: Masahiro Yamada Reviewed-by: Petr Vorel Reviewed-by: Arnout Vandecappelle (Essensium/Mind) --- scripts/kconfig/merge_config.sh | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh index da66e7742282..0ef906499646 100755 --- a/scripts/kconfig/merge_config.sh +++ b/scripts/kconfig/merge_config.sh @@ -102,7 +102,8 @@ if [ ! -r "$INITFILE" ]; then fi MERGE_LIST=$* -SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p" +SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p" +SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p" TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX) @@ -116,7 +117,7 @@ for MERGE_FILE in $MERGE_LIST ; do echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2 exit 1 fi - CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE) + CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE) for CFG in $CFG_LIST ; do grep -q -w $CFG $TMP_FILE || continue @@ -159,7 +160,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET # Check all specified config values took (might have missed-dependency issues) -for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do +for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE) ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG") From bbcde0a7241261cd0ca8d8e6b94a4113a4b71443 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 6 Nov 2018 13:18:05 +0900 Subject: [PATCH 418/726] kbuild: deb-pkg: fix too low build version number Since commit b41d920acff8 ("kbuild: deb-pkg: split generating packaging and build"), the build version of the kernel contained in a deb package is too low by 1. Prior to the bad commit, the kernel was built first, then the number in .version file was read out, and written into the debian control file. Now, the debian control file is created before the kernel is actually compiled, which is causing the version number mismatch. Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require the build system to use the specified version number. Fixes: b41d920acff8 ("kbuild: deb-pkg: split generating packaging and build") Reported-by: Doug Smythies Signed-off-by: Masahiro Yamada Tested-by: Doug Smythies --- scripts/package/mkdebian | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian index 663a7f343b42..edcad61fe3cd 100755 --- a/scripts/package/mkdebian +++ b/scripts/package/mkdebian @@ -88,6 +88,7 @@ set_debarch() { version=$KERNELRELEASE if [ -n "$KDEB_PKGVERSION" ]; then packageversion=$KDEB_PKGVERSION + revision=${packageversion##*-} else revision=$(cat .version 2>/dev/null||echo 1) packageversion=$version-$revision @@ -205,10 +206,12 @@ cat < debian/rules #!$(command -v $MAKE) -f build: - \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC= + \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \ + KBUILD_BUILD_VERSION=${revision} KBUILD_SRC= binary-arch: - \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} KBUILD_SRC= intdeb-pkg + \$(MAKE) KERNELRELEASE=${version} ARCH=${ARCH} \ + KBUILD_BUILD_VERSION=${revision} KBUILD_SRC= intdeb-pkg clean: rm -rf debian/*tmp debian/files From 8ef14c2c41d962756d314f1d7dc972b0ea7a180f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 6 Nov 2018 10:10:38 -0800 Subject: [PATCH 419/726] Revert "scripts/setlocalversion: git: Make -dirty check more robust" This reverts commit 6147b1cf19651c7de297e69108b141fb30aa2349. The reverted patch results in attempted write access to the source repository, even if that repository is mounted read-only. Output from "strace git status -uno --porcelain": getcwd("/tmp/linux-test", 129) = 16 open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = -1 EROFS (Read-only file system) While git appears to be able to handle this situation, a monitored build environment (such as the one used for Chrome OS kernel builds) may detect it and bail out with an access violation error. On top of that, the attempted write access suggests that git _will_ write to the file even if a build output directory is specified. Users may have the reasonable expectation that the source repository remains untouched in that situation. Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust" Cc: Genki Sky Signed-off-by: Guenter Roeck Reviewed-by: Brian Norris Signed-off-by: Masahiro Yamada --- scripts/setlocalversion | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 79f7dd57d571..71f39410691b 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -74,7 +74,7 @@ scm_version() fi # Check for uncommitted changes - if git status -uno --porcelain | grep -qv '^.. scripts/package'; then + if git diff-index --name-only HEAD | grep -qv "^scripts/package"; then printf '%s' -dirty fi From d5615e472d23e854e96192103b6ae7977e705f01 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 7 Nov 2018 08:36:46 -0600 Subject: [PATCH 420/726] builddeb: Fix inclusion of dtbs in debian package MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 37c8a5fafa3b ("kbuild: consolidate Devicetree dtb build rules") moved the location of 'dtbs_install' target which caused dtbs to not be installed when building debian package with 'bindeb-pkg' target. Update the builddeb script to use the same logic that determines if there's a 'dtbs_install' target which is presence of the arch dts directory. Also, use CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF as that's a better indication of whether we are building dtbs. This commit will also have the side effect of installing dtbs on any arch that has dts files. Previously, it was dependent on whether the arch defined 'dtbs_install'. Fixes: 37c8a5fafa3b ("kbuild: consolidate Devicetree dtb build rules") Reported-by: Nuno Gonçalves Signed-off-by: Rob Herring Signed-off-by: Masahiro Yamada --- scripts/package/builddeb | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 0b31f4f1f92c..f43a274f4f1d 100755 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -83,9 +83,9 @@ else fi cp "$($MAKE -s -f $srctree/Makefile image_name)" "$tmpdir/$installed_image_path" -if grep -q "^CONFIG_OF=y" $KCONFIG_CONFIG ; then +if grep -q "^CONFIG_OF_EARLY_FLATTREE=y" $KCONFIG_CONFIG ; then # Only some architectures with OF support have this target - if grep -q dtbs_install "${srctree}/arch/$SRCARCH/Makefile"; then + if [ -d "${srctree}/arch/$SRCARCH/boot/dts" ]; then $MAKE KBUILD_SRC= INSTALL_DTBS_PATH="$tmpdir/usr/lib/$packagename" dtbs_install fi fi From e670de54c813b5bc3672dd1c67871dc60e9206f4 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Thu, 18 Oct 2018 05:09:30 +0000 Subject: [PATCH 421/726] Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up In kvp_send_key(), we do need call process_ib_ipinfo() if message->kvp_hdr.operation is KVP_OP_GET_IP_INFO, because it turns out the userland hv_kvp_daemon needs the info of operation, adapter_id and addr_family. With the incorrect fc62c3b1977d, the host can't get the VM's IP via KVP. And, fc62c3b1977d added a "break;", but actually forgot to initialize the key_size/value in the case of KVP_OP_SET, so the default key_size of 0 is passed to the kvp daemon, and the pool files /var/lib/hyperv/.kvp_pool_* can't be updated. This patch effectively rolls back the previous fc62c3b1977d, and correctly fixes the "this statement may fall through" warnings. This patch is tested on WS 2012 R2 and 2016. Fixes: fc62c3b1977d ("Drivers: hv: kvp: Fix two "this statement may fall through" warnings") Signed-off-by: Dexuan Cui Cc: K. Y. Srinivasan Cc: Stephen Hemminger Signed-off-by: Haiyang Zhang Cc: Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index a7513a8a8e37..d6106e1a0d4a 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -353,6 +353,9 @@ static void process_ib_ipinfo(void *in_msg, void *out_msg, int op) out->body.kvp_ip_val.dhcp_enabled = in->kvp_ip_val.dhcp_enabled; + /* fallthrough */ + + case KVP_OP_GET_IP_INFO: utf16s_to_utf8s((wchar_t *)in->kvp_ip_val.adapter_id, MAX_ADAPTER_ID_SIZE, UTF16_LITTLE_ENDIAN, @@ -405,7 +408,11 @@ kvp_send_key(struct work_struct *dummy) process_ib_ipinfo(in_msg, message, KVP_OP_SET_IP_INFO); break; case KVP_OP_GET_IP_INFO: - /* We only need to pass on message->kvp_hdr.operation. */ + /* + * We only need to pass on the info of operation, adapter_id + * and addr_family to the userland kvp daemon. + */ + process_ib_ipinfo(in_msg, message, KVP_OP_GET_IP_INFO); break; case KVP_OP_SET: switch (in_msg->body.kvp_set.data.value_type) { @@ -446,9 +453,9 @@ kvp_send_key(struct work_struct *dummy) } - break; - - case KVP_OP_GET: + /* + * The key is always a string - utf16 encoding. + */ message->body.kvp_set.data.key_size = utf16s_to_utf8s( (wchar_t *)in_msg->body.kvp_set.data.key, @@ -456,6 +463,17 @@ kvp_send_key(struct work_struct *dummy) UTF16_LITTLE_ENDIAN, message->body.kvp_set.data.key, HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1; + + break; + + case KVP_OP_GET: + message->body.kvp_get.data.key_size = + utf16s_to_utf8s( + (wchar_t *)in_msg->body.kvp_get.data.key, + in_msg->body.kvp_get.data.key_size, + UTF16_LITTLE_ENDIAN, + message->body.kvp_get.data.key, + HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1; break; case KVP_OP_DELETE: From fee05f455ceb5c670cbe48e2f9454ebc4a388554 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 16 Oct 2018 12:59:44 +0200 Subject: [PATCH 422/726] drivers/misc/sgi-gru: fix Spectre v1 vulnerability req.gid can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn: potential spectre issue 'gru_base' [w] Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which uses it to index gru_base. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman --- drivers/misc/sgi-gru/grukdump.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/misc/sgi-gru/grukdump.c b/drivers/misc/sgi-gru/grukdump.c index 313da3150262..1540a7785e14 100644 --- a/drivers/misc/sgi-gru/grukdump.c +++ b/drivers/misc/sgi-gru/grukdump.c @@ -27,6 +27,9 @@ #include #include #include + +#include + #include "gru.h" #include "grutables.h" #include "gruhandles.h" @@ -196,6 +199,7 @@ int gru_dump_chiplet_request(unsigned long arg) /* Currently, only dump by gid is implemented */ if (req.gid >= gru_max_gids) return -EINVAL; + req.gid = array_index_nospec(req.gid, gru_max_gids); gru = GID_TO_GRU(req.gid); ubuf = req.buf; From 7c97301285b62a41d6bceded7d964085fc8cc50f Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 17 Oct 2018 10:09:02 -0700 Subject: [PATCH 423/726] misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by: Nathan Chancellor Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/misc/atmel-ssc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index b2a0340f277e..d8e3cc2dc747 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -132,7 +132,7 @@ static const struct of_device_id atmel_ssc_dt_ids[] = { MODULE_DEVICE_TABLE(of, atmel_ssc_dt_ids); #endif -static inline const struct atmel_ssc_platform_data * __init +static inline const struct atmel_ssc_platform_data * atmel_ssc_get_driver_data(struct platform_device *pdev) { if (pdev->dev.of_node) { From 0749aa25af82c690395a96e799cd2c6e54c459cf Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 6 Nov 2018 15:41:41 +0000 Subject: [PATCH 424/726] nvmem: core: fix regression in of_nvmem_cell_get() NVMEM DT support seems to be totally broken after commit e888d445ac33 ("nvmem: resolve cells from DT at registration time") Fix this! Index used in of_nvmem_cell_get() to find cell is specific to consumer, It can not be used for searching the cell in provider. Use device_node instead of this to find the matching cell in device tree case. Fixes: e888d445ac33 ("nvmem: resolve cells from DT at registration time") Reported-by: Niklas Cassel Signed-off-by: Srinivas Kandagatla Tested-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 9b18ce90f907..27f67dfa649d 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -44,6 +44,7 @@ struct nvmem_cell { int bytes; int bit_offset; int nbits; + struct device_node *np; struct nvmem_device *nvmem; struct list_head node; }; @@ -298,6 +299,7 @@ static void nvmem_cell_drop(struct nvmem_cell *cell) mutex_lock(&nvmem_mutex); list_del(&cell->node); mutex_unlock(&nvmem_mutex); + of_node_put(cell->np); kfree(cell->name); kfree(cell); } @@ -530,6 +532,7 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem) return -ENOMEM; cell->nvmem = nvmem; + cell->np = of_node_get(child); cell->offset = be32_to_cpup(addr++); cell->bytes = be32_to_cpup(addr); cell->name = kasprintf(GFP_KERNEL, "%pOFn", child); @@ -960,14 +963,13 @@ out: #if IS_ENABLED(CONFIG_OF) static struct nvmem_cell * -nvmem_find_cell_by_index(struct nvmem_device *nvmem, int index) +nvmem_find_cell_by_node(struct nvmem_device *nvmem, struct device_node *np) { struct nvmem_cell *cell = NULL; - int i = 0; mutex_lock(&nvmem_mutex); list_for_each_entry(cell, &nvmem->cells, node) { - if (index == i++) + if (np == cell->np) break; } mutex_unlock(&nvmem_mutex); @@ -1011,7 +1013,7 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id) if (IS_ERR(nvmem)) return ERR_CAST(nvmem); - cell = nvmem_find_cell_by_index(nvmem, index); + cell = nvmem_find_cell_by_node(nvmem, cell_np); if (!cell) { __nvmem_device_put(nvmem); return ERR_PTR(-ENOENT); From 8bb0a88600f0267cfcc245d34f8c4abe8c282713 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 19 Oct 2018 13:58:01 +0100 Subject: [PATCH 425/726] test_firmware: fix error return getting clobbered In the case where eq->fw->size > PAGE_SIZE the error return rc is being set to EINVAL however this is being overwritten to rc = req->fw->size because the error exit path via label 'out' is not being taken. Fix this by adding the jump to the error exit path 'out'. Detected by CoverityScan, CID#1453465 ("Unused value") Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests") Signed-off-by: Colin Ian King Signed-off-by: Greg Kroah-Hartman --- lib/test_firmware.c | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/test_firmware.c b/lib/test_firmware.c index b984806d7d7b..7cab9a9869ac 100644 --- a/lib/test_firmware.c +++ b/lib/test_firmware.c @@ -837,6 +837,7 @@ static ssize_t read_firmware_show(struct device *dev, if (req->fw->size > PAGE_SIZE) { pr_err("Testing interface must use PAGE_SIZE firmware for now\n"); rc = -EINVAL; + goto out; } memcpy(buf, req->fw->data, req->fw->size); From 432798195bbce1f8cd33d1c0284d0538835e25fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 26 Oct 2018 10:19:51 +0300 Subject: [PATCH 426/726] uio: Fix an Oops on load I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails") Reported-by: Mathias Thore Signed-off-by: Dan Carpenter Cc: stable Tested-by: Mathias Thore Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 85644669fbe7..0a357db4b31b 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -961,6 +961,8 @@ int __uio_register_device(struct module *owner, if (ret) goto err_uio_dev_add_attributes; + info->uio_dev = idev; + if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) { /* * Note that we deliberately don't use devm_request_irq @@ -972,11 +974,12 @@ int __uio_register_device(struct module *owner, */ ret = request_irq(info->irq, uio_interrupt, info->irq_flags, info->name, idev); - if (ret) + if (ret) { + info->uio_dev = NULL; goto err_request_irq; + } } - info->uio_dev = idev; return 0; err_request_irq: From 7ab412d33b4c7ff3e0148d3db25dd861edd1283d Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Sat, 10 Nov 2018 17:30:24 -0500 Subject: [PATCH 427/726] tipc: fix link re-establish failure When a link failure is detected locally, the link is reset, the flag link->in_session is set to false, and a RESET_MSG with the 'stopping' bit set is sent to the peer. The purpose of this bit is to inform the peer that this endpoint just is going down, and that the peer should handle the reception of this particular RESET message as a local failure. This forces the peer to accept another RESET or ACTIVATE message from this endpoint before it can re-establish the link. This again is necessary to ensure that link session numbers are properly exchanged before the link comes up again. If a failure is detected locally at the same time at the peer endpoint this will do the same, which is also a correct behavior. However, when receiving such messages, the endpoints will not distinguish between 'stopping' RESETs and ordinary ones when it comes to updating session numbers. Both endpoints will copy the received session number and set their 'in_session' flags to true at the reception, while they are still expecting another RESET from the peer before they can go ahead and re-establish. This is contradictory, since, after applying the validation check referred to below, the 'in_session' flag will cause rejection of all such messages, and the link will never come up again. We now fix this by not only handling received RESET/STOPPING messages as a local failure, but also by omitting to set a new session number and the 'in_session' flag in such cases. Fixes: 7ea817f4e832 ("tipc: check session number before accepting link protocol messages") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/link.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/tipc/link.c b/net/tipc/link.c index 201c3b5bc96b..836727e363c4 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -1594,14 +1594,17 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb, if (in_range(peers_prio, l->priority + 1, TIPC_MAX_LINK_PRI)) l->priority = peers_prio; - /* ACTIVATE_MSG serves as PEER_RESET if link is already down */ - if (msg_peer_stopping(hdr)) + /* If peer is going down we want full re-establish cycle */ + if (msg_peer_stopping(hdr)) { rc = tipc_link_fsm_evt(l, LINK_FAILURE_EVT); - else if ((mtyp == RESET_MSG) || !link_is_up(l)) + break; + } + /* ACTIVATE_MSG serves as PEER_RESET if link is already down */ + if (mtyp == RESET_MSG || !link_is_up(l)) rc = tipc_link_fsm_evt(l, LINK_PEER_RESET_EVT); /* ACTIVATE_MSG takes up link if it was already locally reset */ - if ((mtyp == ACTIVATE_MSG) && (l->state == LINK_ESTABLISHING)) + if (mtyp == ACTIVATE_MSG && l->state == LINK_ESTABLISHING) rc = TIPC_LINK_UP_EVT; l->peer_session = msg_session(hdr); From a9049ff9214da68df1179a7d5e36b43479abc9b8 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 11 Nov 2018 00:41:10 +0100 Subject: [PATCH 428/726] net: dsa: mv88e6xxx: Fix clearing of stats counters The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global1.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index d721ccf7d8be..38e399e0f30e 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -567,6 +567,8 @@ int mv88e6xxx_g1_stats_clear(struct mv88e6xxx_chip *chip) if (err) return err; + /* Keep the histogram mode bits */ + val &= MV88E6XXX_G1_STATS_OP_HIST_RX_TX; val |= MV88E6XXX_G1_STATS_OP_BUSY | MV88E6XXX_G1_STATS_OP_FLUSH_ALL; err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val); From 7236ead1b14923f3ba35cd29cce13246be83f451 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 10 Nov 2018 16:22:29 -0800 Subject: [PATCH 429/726] act_mirred: clear skb->tstamp on redirect If sch_fq is used at ingress, skbs that might have been timestamped by net_timestamp_set() if a packet capture is requesting timestamps could be delayed by arbitrary amount of time, since sch_fq time base is MONOTONIC. Fix this problem by moving code from sch_netem.c to act_mirred.c. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/act_mirred.c | 3 ++- net/sched/sch_netem.c | 9 --------- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 1dae5f2b358f..c8cf4d10c435 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -258,7 +258,8 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a, if (is_redirect) { skb2->tc_redirected = 1; skb2->tc_from_ingress = skb2->tc_at_ingress; - + if (skb2->tc_from_ingress) + skb2->tstamp = 0; /* let's the caller reinsert the packet, if possible */ if (use_reinsert) { res->ingress = want_ingress; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 57b3ad9394ad..2c38e3d07924 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -648,15 +648,6 @@ deliver: */ skb->dev = qdisc_dev(sch); -#ifdef CONFIG_NET_CLS_ACT - /* - * If it's at ingress let's pretend the delay is - * from the network (tstamp will be updated). - */ - if (skb->tc_redirected && skb->tc_from_ingress) - skb->tstamp = 0; -#endif - if (q->slot.slot_next) { q->slot.packets_left--; q->slot.bytes_left -= qdisc_pkt_len(skb); From ccda4af0f4b92f7b4c308d3acc262f4a7e3affad Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Nov 2018 17:12:31 -0600 Subject: [PATCH 430/726] Linux 4.20-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9fce8b91c15f..2f36db897895 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 20 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = "People's Front" # *DOCUMENTATION* From c8b00bb742dd036388f37d019dbb9db177f3e66c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 1 Nov 2018 16:21:05 +1100 Subject: [PATCH 431/726] powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel() With preempt enabled we see warnings in do_slb_fault(): BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u33:0/98 futex hash table entries: 4096 (order: 3, 524288 bytes) caller is do_slb_fault+0x204/0x230 CPU: 5 PID: 98 Comm: kworker/u33:0 Not tainted 4.19.0-rc3-gcc-7.3.1-00022-g1936f094e164 #138 Call Trace: dump_stack+0xb4/0x104 (unreliable) check_preemption_disabled+0x148/0x150 do_slb_fault+0x204/0x230 data_access_slb_common+0x138/0x180 This is caused by the get_paca() in slb_allocate_kernel(), which includes a call to debug_smp_processor_id(). slb_allocate_kernel() can only be called from do_slb_fault(), and in that path interrupts are hard disabled and so we can't be preempted, but we can't update the preempt flags (in thread_info) because that could cause an SLB fault. So just use local_paca which is safe and doesn't cause the warning. Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Signed-off-by: Michael Ellerman --- arch/powerpc/mm/slb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index b663a36f9ada..bc3914d54e26 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -708,7 +708,7 @@ static long slb_allocate_kernel(unsigned long ea, unsigned long id) return -EFAULT; if (ea < H_VMALLOC_END) - flags = get_paca()->vmalloc_sllp; + flags = local_paca->vmalloc_sllp; else flags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_io_psize].sllp; } else { From 43c6494fa1499912c8177e71450c0279041152a6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Nov 2018 23:37:58 +1100 Subject: [PATCH 432/726] powerpc/io: Fix the IO workarounds code to work with Radix Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/io.h | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 3ef40b703c4a..e746becd9d6f 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -268,19 +268,13 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src, * their hooks, a bitfield is reserved for use by the platform near the * top of MMIO addresses (not PIO, those have to cope the hard way). * - * This bit field is 12 bits and is at the top of the IO virtual - * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * The highest address in the kernel virtual space are: * - * The kernel virtual space is thus: + * d0003fffffffffff # with Hash MMU + * c00fffffffffffff # with Radix MMU * - * 0xD000000000000000 : vmalloc - * 0xD000080000000000 : PCI PHB IO space - * 0xD000080080000000 : ioremap - * 0xD0000fffffffffff : end of ioremap region - * - * Since the top 4 bits are reserved as the region ID, we use thus - * the next 12 bits and keep 4 bits available for the future if the - * virtual address space is ever to be extended. + * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits + * that can be used for the field. * * The direct IO mapping operations will then mask off those bits * before doing the actual access, though that only happen when @@ -292,8 +286,8 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src, */ #ifdef CONFIG_PPC_INDIRECT_MMIO -#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul -#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_IO_IND_TOKEN_SHIFT 52 +#define PCI_IO_IND_TOKEN_MASK (0xfful << PCI_IO_IND_TOKEN_SHIFT) #define PCI_FIX_ADDR(addr) \ ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) #define PCI_GET_ADDR_TOKEN(addr) \ From 2c7645b0f7d1014f2636393de7906c6bfd25939f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 12 Nov 2018 13:46:06 +1100 Subject: [PATCH 433/726] selftests/powerpc: Fix wild_bctr test to work on ppc64 The selftest I recently added to test branching to an out-of-bounds NIP doesn't work on 64-bit big endian. It does fail but not in the right way. That is it SEGVs trying to load from the opd at BAD_NIP, but it never gets as far as branching to BAD_NIP. To fix it we need to create an opd which is reachable but which holds the bad address. Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr") Signed-off-by: Michael Ellerman --- tools/testing/selftests/powerpc/mm/wild_bctr.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/mm/wild_bctr.c b/tools/testing/selftests/powerpc/mm/wild_bctr.c index 1b0e9e9a2ddc..90469a9e49d4 100644 --- a/tools/testing/selftests/powerpc/mm/wild_bctr.c +++ b/tools/testing/selftests/powerpc/mm/wild_bctr.c @@ -105,6 +105,20 @@ static void dump_regs(void) } } +#ifdef _CALL_AIXDESC +struct opd { + unsigned long ip; + unsigned long toc; + unsigned long env; +}; +static struct opd bad_opd = { + .ip = BAD_NIP, +}; +#define BAD_FUNC (&bad_opd) +#else +#define BAD_FUNC BAD_NIP +#endif + int test_wild_bctr(void) { int (*func_ptr)(void); @@ -133,7 +147,7 @@ int test_wild_bctr(void) poison_regs(); - func_ptr = (int (*)(void))BAD_NIP; + func_ptr = (int (*)(void))BAD_FUNC; func_ptr(); FAIL_IF(1); /* we didn't segv? */ From c469933e772132aad040bd6a2adc8edf9ad6f825 Mon Sep 17 00:00:00 2001 From: Patrick Bellasi Date: Mon, 5 Nov 2018 14:53:58 +0000 Subject: [PATCH 434/726] sched/fair: Fix cpu_util_wake() for 'execl' type workloads A ~10% regression has been reported for UnixBench's execl throughput test by Aaron Lu and Ye Xiaolong: https://lkml.org/lkml/2018/10/30/765 That test is pretty simple, it does a "recursive" execve() syscall on the same binary. Starting from the syscall, this sequence is possible: do_execve() do_execveat_common() __do_execve_file() sched_exec() select_task_rq_fair() <==| Task already enqueued find_idlest_cpu() find_idlest_group() capacity_spare_wake() <==| Functions not called from cpu_util_wake() | the wakeup path which means we can end up calling cpu_util_wake() not only from the "wakeup path", as its name would suggest. Indeed, the task doing an execve() syscall is already enqueued on the CPU we want to get the cpu_util_wake() for. The estimated utilization for a CPU computed in cpu_util_wake() was written under the assumption that function can be called only from the wakeup path. If instead the task is already enqueued, we end up with a utilization which does not remove the current task's contribution from the estimated utilization of the CPU. This will wrongly assume a reduced spare capacity on the current CPU and increase the chances to migrate the task on execve. The regression is tracked down to: commit d519329f72a6 ("sched/fair: Update util_est only on util_avg updates") because in that patch we turn on by default the UTIL_EST sched feature. However, the real issue is introduced by: commit f9be3e5961c5 ("sched/fair: Use util_est in LB and WU paths") Let's fix this by ensuring to always discount the task estimated utilization from the CPU's estimated utilization when the task is also the current one. The same benchmark of the bug report, executed on a dual socket 40 CPUs Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz machine, reports these "Execl Throughput" figures (higher the better): mainline : 48136.5 lps mainline+fix : 55376.5 lps which correspond to a 15% speedup. Moreover, since {cpu_util,capacity_spare}_wake() are not really only used from the wakeup path, let's remove this ambiguity by using a better matching name: {cpu_util,capacity_spare}_without(). Since we are at that, let's also improve the existing documentation. Reported-by: Aaron Lu Reported-by: Ye Xiaolong Tested-by: Aaron Lu Signed-off-by: Patrick Bellasi Signed-off-by: Peter Zijlstra (Intel) Cc: Dietmar Eggemann Cc: Juri Lelli Cc: Linus Torvalds Cc: Morten Rasmussen Cc: Peter Zijlstra Cc: Quentin Perret Cc: Steve Muckle Cc: Suren Baghdasaryan Cc: Thomas Gleixner Cc: Todd Kjos Cc: Vincent Guittot Fixes: f9be3e5961c5 (sched/fair: Use util_est in LB and WU paths) Link: https://lore.kernel.org/lkml/20181025093100.GB13236@e110439-lin/ Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 62 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 48 insertions(+), 14 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 3648d0300fdf..ac855b2f4774 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5674,11 +5674,11 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, return target; } -static unsigned long cpu_util_wake(int cpu, struct task_struct *p); +static unsigned long cpu_util_without(int cpu, struct task_struct *p); -static unsigned long capacity_spare_wake(int cpu, struct task_struct *p) +static unsigned long capacity_spare_without(int cpu, struct task_struct *p) { - return max_t(long, capacity_of(cpu) - cpu_util_wake(cpu, p), 0); + return max_t(long, capacity_of(cpu) - cpu_util_without(cpu, p), 0); } /* @@ -5738,7 +5738,7 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, avg_load += cfs_rq_load_avg(&cpu_rq(i)->cfs); - spare_cap = capacity_spare_wake(i, p); + spare_cap = capacity_spare_without(i, p); if (spare_cap > max_spare_cap) max_spare_cap = spare_cap; @@ -5889,8 +5889,8 @@ static inline int find_idlest_cpu(struct sched_domain *sd, struct task_struct *p return prev_cpu; /* - * We need task's util for capacity_spare_wake, sync it up to prev_cpu's - * last_update_time. + * We need task's util for capacity_spare_without, sync it up to + * prev_cpu's last_update_time. */ if (!(sd_flag & SD_BALANCE_FORK)) sync_entity_load_avg(&p->se); @@ -6216,10 +6216,19 @@ static inline unsigned long cpu_util(int cpu) } /* - * cpu_util_wake: Compute CPU utilization with any contributions from - * the waking task p removed. + * cpu_util_without: compute cpu utilization without any contributions from *p + * @cpu: the CPU which utilization is requested + * @p: the task which utilization should be discounted + * + * The utilization of a CPU is defined by the utilization of tasks currently + * enqueued on that CPU as well as tasks which are currently sleeping after an + * execution on that CPU. + * + * This method returns the utilization of the specified CPU by discounting the + * utilization of the specified task, whenever the task is currently + * contributing to the CPU utilization. */ -static unsigned long cpu_util_wake(int cpu, struct task_struct *p) +static unsigned long cpu_util_without(int cpu, struct task_struct *p) { struct cfs_rq *cfs_rq; unsigned int util; @@ -6231,7 +6240,7 @@ static unsigned long cpu_util_wake(int cpu, struct task_struct *p) cfs_rq = &cpu_rq(cpu)->cfs; util = READ_ONCE(cfs_rq->avg.util_avg); - /* Discount task's blocked util from CPU's util */ + /* Discount task's util from CPU's util */ util -= min_t(unsigned int, util, task_util(p)); /* @@ -6240,14 +6249,14 @@ static unsigned long cpu_util_wake(int cpu, struct task_struct *p) * a) if *p is the only task sleeping on this CPU, then: * cpu_util (== task_util) > util_est (== 0) * and thus we return: - * cpu_util_wake = (cpu_util - task_util) = 0 + * cpu_util_without = (cpu_util - task_util) = 0 * * b) if other tasks are SLEEPING on this CPU, which is now exiting * IDLE, then: * cpu_util >= task_util * cpu_util > util_est (== 0) * and thus we discount *p's blocked utilization to return: - * cpu_util_wake = (cpu_util - task_util) >= 0 + * cpu_util_without = (cpu_util - task_util) >= 0 * * c) if other tasks are RUNNABLE on that CPU and * util_est > cpu_util @@ -6260,8 +6269,33 @@ static unsigned long cpu_util_wake(int cpu, struct task_struct *p) * covered by the following code when estimated utilization is * enabled. */ - if (sched_feat(UTIL_EST)) - util = max(util, READ_ONCE(cfs_rq->avg.util_est.enqueued)); + if (sched_feat(UTIL_EST)) { + unsigned int estimated = + READ_ONCE(cfs_rq->avg.util_est.enqueued); + + /* + * Despite the following checks we still have a small window + * for a possible race, when an execl's select_task_rq_fair() + * races with LB's detach_task(): + * + * detach_task() + * p->on_rq = TASK_ON_RQ_MIGRATING; + * ---------------------------------- A + * deactivate_task() \ + * dequeue_task() + RaceTime + * util_est_dequeue() / + * ---------------------------------- B + * + * The additional check on "current == p" it's required to + * properly fix the execl regression and it helps in further + * reducing the chances for the above race. + */ + if (unlikely(task_on_rq_queued(p) || current == p)) { + estimated -= min_t(unsigned int, estimated, + (_task_util_est(p) | UTIL_AVG_UNCHANGED)); + } + util = max(util, estimated); + } /* * Utilization (estimated) can exceed the CPU capacity, thus let's From c10a8de0d32e95b0b8c7c17b6dc09baea5a5a899 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Fri, 19 Oct 2018 10:04:18 -0700 Subject: [PATCH 435/726] perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake. Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U, H, S processor lines. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore_snb.c | 115 ++++++++++++++++++++++++++++- 1 file changed, 114 insertions(+), 1 deletion(-) diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c index 8527c3e1038b..bfa25814fe5f 100644 --- a/arch/x86/events/intel/uncore_snb.c +++ b/arch/x86/events/intel/uncore_snb.c @@ -15,6 +15,25 @@ #define PCI_DEVICE_ID_INTEL_SKL_HQ_IMC 0x1910 #define PCI_DEVICE_ID_INTEL_SKL_SD_IMC 0x190f #define PCI_DEVICE_ID_INTEL_SKL_SQ_IMC 0x191f +#define PCI_DEVICE_ID_INTEL_KBL_Y_IMC 0x590c +#define PCI_DEVICE_ID_INTEL_KBL_U_IMC 0x5904 +#define PCI_DEVICE_ID_INTEL_KBL_UQ_IMC 0x5914 +#define PCI_DEVICE_ID_INTEL_KBL_SD_IMC 0x590f +#define PCI_DEVICE_ID_INTEL_KBL_SQ_IMC 0x591f +#define PCI_DEVICE_ID_INTEL_CFL_2U_IMC 0x3ecc +#define PCI_DEVICE_ID_INTEL_CFL_4U_IMC 0x3ed0 +#define PCI_DEVICE_ID_INTEL_CFL_4H_IMC 0x3e10 +#define PCI_DEVICE_ID_INTEL_CFL_6H_IMC 0x3ec4 +#define PCI_DEVICE_ID_INTEL_CFL_2S_D_IMC 0x3e0f +#define PCI_DEVICE_ID_INTEL_CFL_4S_D_IMC 0x3e1f +#define PCI_DEVICE_ID_INTEL_CFL_6S_D_IMC 0x3ec2 +#define PCI_DEVICE_ID_INTEL_CFL_8S_D_IMC 0x3e30 +#define PCI_DEVICE_ID_INTEL_CFL_4S_W_IMC 0x3e18 +#define PCI_DEVICE_ID_INTEL_CFL_6S_W_IMC 0x3ec6 +#define PCI_DEVICE_ID_INTEL_CFL_8S_W_IMC 0x3e31 +#define PCI_DEVICE_ID_INTEL_CFL_4S_S_IMC 0x3e33 +#define PCI_DEVICE_ID_INTEL_CFL_6S_S_IMC 0x3eca +#define PCI_DEVICE_ID_INTEL_CFL_8S_S_IMC 0x3e32 /* SNB event control */ #define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff @@ -569,7 +588,82 @@ static const struct pci_device_id skl_uncore_pci_ids[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_SQ_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, - + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBL_Y_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBL_U_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBL_UQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBL_SD_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBL_SQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_2U_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_4U_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_4H_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_6H_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_2S_D_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_4S_D_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_6S_D_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_8S_D_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_4S_W_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_6S_W_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_8S_W_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_4S_S_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_6S_S_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CFL_8S_S_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, { /* end: all zeroes */ }, }; @@ -618,6 +712,25 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = { IMC_DEV(SKL_HQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core H Quad Core */ IMC_DEV(SKL_SD_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Dual Core */ IMC_DEV(SKL_SQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Quad Core */ + IMC_DEV(KBL_Y_IMC, &skl_uncore_pci_driver), /* 7th Gen Core Y */ + IMC_DEV(KBL_U_IMC, &skl_uncore_pci_driver), /* 7th Gen Core U */ + IMC_DEV(KBL_UQ_IMC, &skl_uncore_pci_driver), /* 7th Gen Core U Quad Core */ + IMC_DEV(KBL_SD_IMC, &skl_uncore_pci_driver), /* 7th Gen Core S Dual Core */ + IMC_DEV(KBL_SQ_IMC, &skl_uncore_pci_driver), /* 7th Gen Core S Quad Core */ + IMC_DEV(CFL_2U_IMC, &skl_uncore_pci_driver), /* 8th Gen Core U 2 Cores */ + IMC_DEV(CFL_4U_IMC, &skl_uncore_pci_driver), /* 8th Gen Core U 4 Cores */ + IMC_DEV(CFL_4H_IMC, &skl_uncore_pci_driver), /* 8th Gen Core H 4 Cores */ + IMC_DEV(CFL_6H_IMC, &skl_uncore_pci_driver), /* 8th Gen Core H 6 Cores */ + IMC_DEV(CFL_2S_D_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 2 Cores Desktop */ + IMC_DEV(CFL_4S_D_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 4 Cores Desktop */ + IMC_DEV(CFL_6S_D_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 6 Cores Desktop */ + IMC_DEV(CFL_8S_D_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 8 Cores Desktop */ + IMC_DEV(CFL_4S_W_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 4 Cores Work Station */ + IMC_DEV(CFL_6S_W_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 6 Cores Work Station */ + IMC_DEV(CFL_8S_W_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 8 Cores Work Station */ + IMC_DEV(CFL_4S_S_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 4 Cores Server */ + IMC_DEV(CFL_6S_S_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 6 Cores Server */ + IMC_DEV(CFL_8S_S_IMC, &skl_uncore_pci_driver), /* 8th Gen Core S 8 Cores Server */ { /* end marker */ } }; From 4d47d6407ac7b4b442a4e717488a3bb137398b6c Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Fri, 19 Oct 2018 10:04:19 -0700 Subject: [PATCH 436/726] perf/x86/intel/uncore: Support CoffeeLake 8th CBOX Coffee Lake has 8 core products which has 8 Cboxes. The 8th CBOX is mapped into different MSR space. Increase the num_boxes to 8 to handle the new products. It will not impact the previous platforms, SkyLake, KabyLake and earlier CoffeeLake. Because the num_boxes will be recalculated in uncore_cpu_init and doesn't exceed the x86_max_cores. Introduce a new box flag bit to indicate the 8th CBOX. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/20181019170419.378-2-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore.h | 33 ++++++++++++++++++++++-------- arch/x86/events/intel/uncore_snb.c | 6 +++++- 2 files changed, 30 insertions(+), 9 deletions(-) diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h index e17ab885b1e9..cb46d602a6b8 100644 --- a/arch/x86/events/intel/uncore.h +++ b/arch/x86/events/intel/uncore.h @@ -129,8 +129,15 @@ struct intel_uncore_box { struct intel_uncore_extra_reg shared_regs[0]; }; -#define UNCORE_BOX_FLAG_INITIATED 0 -#define UNCORE_BOX_FLAG_CTL_OFFS8 1 /* event config registers are 8-byte apart */ +/* CFL uncore 8th cbox MSRs */ +#define CFL_UNC_CBO_7_PERFEVTSEL0 0xf70 +#define CFL_UNC_CBO_7_PER_CTR0 0xf76 + +#define UNCORE_BOX_FLAG_INITIATED 0 +/* event config registers are 8-byte apart */ +#define UNCORE_BOX_FLAG_CTL_OFFS8 1 +/* CFL 8th CBOX has different MSR space */ +#define UNCORE_BOX_FLAG_CFL8_CBOX_MSR_OFFS 2 struct uncore_event_desc { struct kobj_attribute attr; @@ -297,17 +304,27 @@ unsigned int uncore_freerunning_counter(struct intel_uncore_box *box, static inline unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { - return box->pmu->type->event_ctl + - (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - uncore_msr_box_offset(box); + if (test_bit(UNCORE_BOX_FLAG_CFL8_CBOX_MSR_OFFS, &box->flags)) { + return CFL_UNC_CBO_7_PERFEVTSEL0 + + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx); + } else { + return box->pmu->type->event_ctl + + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + + uncore_msr_box_offset(box); + } } static inline unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { - return box->pmu->type->perf_ctr + - (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - uncore_msr_box_offset(box); + if (test_bit(UNCORE_BOX_FLAG_CFL8_CBOX_MSR_OFFS, &box->flags)) { + return CFL_UNC_CBO_7_PER_CTR0 + + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx); + } else { + return box->pmu->type->perf_ctr + + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + + uncore_msr_box_offset(box); + } } static inline diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c index bfa25814fe5f..2593b0d7aeee 100644 --- a/arch/x86/events/intel/uncore_snb.c +++ b/arch/x86/events/intel/uncore_snb.c @@ -221,6 +221,10 @@ static void skl_uncore_msr_init_box(struct intel_uncore_box *box) wrmsrl(SKL_UNC_PERF_GLOBAL_CTL, SNB_UNC_GLOBAL_CTL_EN | SKL_UNC_GLOBAL_CTL_CORE_ALL); } + + /* The 8th CBOX has different MSR space */ + if (box->pmu->pmu_idx == 7) + __set_bit(UNCORE_BOX_FLAG_CFL8_CBOX_MSR_OFFS, &box->flags); } static void skl_uncore_msr_enable_box(struct intel_uncore_box *box) @@ -247,7 +251,7 @@ static struct intel_uncore_ops skl_uncore_msr_ops = { static struct intel_uncore_type skl_uncore_cbox = { .name = "cbox", .num_counters = 4, - .num_boxes = 5, + .num_boxes = 8, .perf_ctr_bits = 44, .fixed_ctr_bits = 48, .perf_ctr = SNB_UNC_CBO_0_PER_CTR0, From 1e9c75fb9c47a75a9aec0cd17db5f6dc36b58e00 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 3 Oct 2018 10:18:33 -0400 Subject: [PATCH 437/726] mnt: fix __detach_mounts infinite loop Since commit ff17fa561a04 ("d_invalidate(): unhash immediately") immediately unhashes the dentry, we'll never return the mountpoint in lookup_mountpoint(), which can lead to an unbreakable loop in d_invalidate(). I have reports of NFS clients getting into this condition after the server removes an export of an existing mount created through follow_automount(), but I suspect there are various other ways to produce this problem if we hunt down users of d_invalidate(). For example, it is possible to get into this state by using XFS' d_invalidate() call in xfs_vn_unlink(): truncate -s 100m img{1,2} mkfs.xfs -q -n version=ci img1 mkfs.xfs -q -n version=ci img2 mkdir -p /mnt/xfs mount img1 /mnt/xfs mkdir /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 cat > /mnt/xfs/sub1/foo & umount -l /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 mount --make-private /mnt/xfs mkdir /mnt/xfs/sub2 mount --move /mnt/xfs/sub1 /mnt/xfs/sub2 rmdir /mnt/xfs/sub1 Fix this by moving the check for an unlinked dentry out of the detach_mounts() path. Fixes: ff17fa561a04 ("d_invalidate(): unhash immediately") Cc: stable@vger.kernel.org Reviewed-by: "Eric W. Biederman" Signed-off-by: Benjamin Coddington Signed-off-by: Eric W. Biederman --- fs/namespace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index 74f64294a410..a7f91265ea67 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -695,9 +695,6 @@ static struct mountpoint *lookup_mountpoint(struct dentry *dentry) hlist_for_each_entry(mp, chain, m_hash) { if (mp->m_dentry == dentry) { - /* might be worth a WARN_ON() */ - if (d_unlinked(dentry)) - return ERR_PTR(-ENOENT); mp->m_count++; return mp; } @@ -711,6 +708,9 @@ static struct mountpoint *get_mountpoint(struct dentry *dentry) int ret; if (d_mountpoint(dentry)) { + /* might be worth a WARN_ON() */ + if (d_unlinked(dentry)) + return ERR_PTR(-ENOENT); mountpoint: read_seqlock_excl(&mount_lock); mp = lookup_mountpoint(dentry); From 563785edfcef02b566e64fb5292c74c1600808aa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Nov 2018 09:43:12 +0100 Subject: [PATCH 438/726] ALSA: hda/realtek - Add quirk entry for HP Pavilion 15 HP Pavilion 15 (103c:820d) with ALC295 codec requires the quirk for the mute LED control over mic3 pin. Added the corresponding quirk entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201653 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fa61674a5605..970bc44a378b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6481,6 +6481,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x2336, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x2337, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x221c, "HP EliteBook 755 G2", ALC280_FIXUP_HP_HEADSET_MIC), + SND_PCI_QUIRK(0x103c, 0x820d, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8256, "HP", ALC221_FIXUP_HP_FRONT_MIC), SND_PCI_QUIRK(0x103c, 0x827e, "HP x360", ALC295_FIXUP_HP_X360), SND_PCI_QUIRK(0x103c, 0x82bf, "HP", ALC221_FIXUP_HP_MIC_NO_PRESENCE), From 0fd791841a6d67af1155a9c3de54dea51220721e Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Thu, 8 Nov 2018 15:59:21 -0800 Subject: [PATCH 439/726] HID: input: Ignore battery reported by Symbol DS4308 The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner which does not have a battery, but reports one anyway that always has capacity 2. Let's apply the IGNORE quirk to prevent it from being treated like a power supply so that userspaces don't get confused that this accessory is almost out of power and warn the user that they need to charge their wired barcode scanner. Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720 Signed-off-by: Benson Leung Reviewed-by: Benjamin Tissoires Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-input.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 02ce75f5ea4e..3004322eb8e4 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1044,6 +1044,7 @@ #define USB_VENDOR_ID_SYMBOL 0x05e0 #define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800 #define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300 +#define USB_DEVICE_ID_SYMBOL_SCANNER_3 0x1200 #define USB_VENDOR_ID_SYNAPTICS 0x06cb #define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index a2f74e6adc70..44ea8e7c71a9 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -325,6 +325,9 @@ static const struct hid_device_id hid_battery_quirks[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084), HID_BATTERY_QUIRK_IGNORE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYMBOL, + USB_DEVICE_ID_SYMBOL_SCANNER_3), + HID_BATTERY_QUIRK_IGNORE }, {} }; From f4156f9656feac21f4de712fac94fae964c5d402 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 30 Oct 2018 12:17:10 +0100 Subject: [PATCH 440/726] batman-adv: Use explicit tvlv padding for ELP packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The announcement messages of batman-adv COMPAT_VERSION 15 have the possibility to announce additional information via a dynamic TVLV part. This part is optional for the ELP packets and currently not parsed by the Linux implementation. Still out-of-tree versions are using it to transport things like neighbor hashes to optimize the rebroadcast behavior. Since the ELP broadcast packets are smaller than the minimal ethernet packet, it often has to be padded. This is often done (as specified in RFC894) with octets of zero and thus work perfectly fine with the TVLV part (making it a zero length and thus empty). But not all ethernet compatible hardware seems to follow this advice. To avoid ambiguous situations when parsing the TVLV header, just force the 4 bytes (TVLV length + padding) after the required ELP header to zero. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Reported-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v_elp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 9f481cfdf77d..e8090f099eb8 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -352,19 +352,21 @@ out: */ int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface) { + static const size_t tvlv_padding = sizeof(__be32); struct batadv_elp_packet *elp_packet; unsigned char *elp_buff; u32 random_seqno; size_t size; int res = -ENOMEM; - size = ETH_HLEN + NET_IP_ALIGN + BATADV_ELP_HLEN; + size = ETH_HLEN + NET_IP_ALIGN + BATADV_ELP_HLEN + tvlv_padding; hard_iface->bat_v.elp_skb = dev_alloc_skb(size); if (!hard_iface->bat_v.elp_skb) goto out; skb_reserve(hard_iface->bat_v.elp_skb, ETH_HLEN + NET_IP_ALIGN); - elp_buff = skb_put_zero(hard_iface->bat_v.elp_skb, BATADV_ELP_HLEN); + elp_buff = skb_put_zero(hard_iface->bat_v.elp_skb, + BATADV_ELP_HLEN + tvlv_padding); elp_packet = (struct batadv_elp_packet *)elp_buff; elp_packet->packet_type = BATADV_ELP; From d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 7 Nov 2018 23:09:12 +0100 Subject: [PATCH 441/726] batman-adv: Expand merged fragment buffer for full packet MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len. But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet. The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Martin Weinelt Co-authored-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/fragmentation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index 0fddc17106bd..5b71a289d04f 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -275,7 +275,7 @@ batadv_frag_merge_packets(struct hlist_head *chain) kfree(entry); packet = (struct batadv_frag_packet *)skb_out->data; - size = ntohs(packet->total_size); + size = ntohs(packet->total_size) + hdr_size; /* Make room for the rest of the fragments. */ if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) { From e0c827aca0730b51f38081aa4e8ecf0912aab55f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 10 Nov 2018 13:16:51 +0200 Subject: [PATCH 442/726] drm/omap: Populate DSS children in omapdss driver The DSS DT node contains children that describe the DSS components (DISPC and internal encoders). Each of those components is handled by a platform driver, and thus needs to be backed by a platform device. The corresponding platform devices are created in mach-omap2 code by a call to of_platform_populate(). While this approach has worked so far, it doesn't model the hardware architecture very well, as it creates child devices before the parent is ready to handle them. This would be akin to creating I2C slaves before the I2C master is available. The task can be easily performed in the omapdss driver code instead, simplifying mach-omap2 code. We however can't remove the mach-omap2 code completely as the omap2fb driver still depends on it, but we can move it to the omap2fb-specific section, where it can stay until the omap2fb driver gets removed. This has the added benefit of not allowing DSS components to probe before the DSS itself, which led to runtime PM issues when the DSS probe is deferred. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart Acked-by: Tony Lindgren Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com --- arch/arm/mach-omap2/display.c | 111 ++++++++++++++---------------- drivers/gpu/drm/omapdrm/dss/dss.c | 11 ++- 2 files changed, 63 insertions(+), 59 deletions(-) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 9500b6e27380..f86b72d1d59e 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -209,11 +209,61 @@ static int __init omapdss_init_fbdev(void) return 0; } -#else -static inline int omapdss_init_fbdev(void) + +static const char * const omapdss_compat_names[] __initconst = { + "ti,omap2-dss", + "ti,omap3-dss", + "ti,omap4-dss", + "ti,omap5-dss", + "ti,dra7-dss", +}; + +static struct device_node * __init omapdss_find_dss_of_node(void) { - return 0; + struct device_node *node; + int i; + + for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { + node = of_find_compatible_node(NULL, NULL, + omapdss_compat_names[i]); + if (node) + return node; + } + + return NULL; } + +static int __init omapdss_init_of(void) +{ + int r; + struct device_node *node; + struct platform_device *pdev; + + /* only create dss helper devices if dss is enabled in the .dts */ + + node = omapdss_find_dss_of_node(); + if (!node) + return 0; + + if (!of_device_is_available(node)) + return 0; + + pdev = of_find_device_by_node(node); + + if (!pdev) { + pr_err("Unable to find DSS platform device\n"); + return -ENODEV; + } + + r = of_platform_populate(node, NULL, NULL, &pdev->dev); + if (r) { + pr_err("Unable to populate DSS submodule devices\n"); + return r; + } + + return omapdss_init_fbdev(); +} +omap_device_initcall(omapdss_init_of); #endif /* CONFIG_FB_OMAP2 */ static void dispc_disable_outputs(void) @@ -361,58 +411,3 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } - -static const char * const omapdss_compat_names[] __initconst = { - "ti,omap2-dss", - "ti,omap3-dss", - "ti,omap4-dss", - "ti,omap5-dss", - "ti,dra7-dss", -}; - -static struct device_node * __init omapdss_find_dss_of_node(void) -{ - struct device_node *node; - int i; - - for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { - node = of_find_compatible_node(NULL, NULL, - omapdss_compat_names[i]); - if (node) - return node; - } - - return NULL; -} - -static int __init omapdss_init_of(void) -{ - int r; - struct device_node *node; - struct platform_device *pdev; - - /* only create dss helper devices if dss is enabled in the .dts */ - - node = omapdss_find_dss_of_node(); - if (!node) - return 0; - - if (!of_device_is_available(node)) - return 0; - - pdev = of_find_device_by_node(node); - - if (!pdev) { - pr_err("Unable to find DSS platform device\n"); - return -ENODEV; - } - - r = of_platform_populate(node, NULL, NULL, &pdev->dev); - if (r) { - pr_err("Unable to populate DSS submodule devices\n"); - return r; - } - - return omapdss_init_fbdev(); -} -omap_device_initcall(omapdss_init_of); diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c b/drivers/gpu/drm/omapdrm/dss/dss.c index 1aaf260aa9b8..7553c7fc1c45 100644 --- a/drivers/gpu/drm/omapdrm/dss/dss.c +++ b/drivers/gpu/drm/omapdrm/dss/dss.c @@ -1484,16 +1484,23 @@ static int dss_probe(struct platform_device *pdev) dss); /* Add all the child devices as components. */ + r = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + if (r) + goto err_uninit_debugfs; + omapdss_gather_components(&pdev->dev); device_for_each_child(&pdev->dev, &match, dss_add_child_component); r = component_master_add_with_match(&pdev->dev, &dss_component_ops, match); if (r) - goto err_uninit_debugfs; + goto err_of_depopulate; return 0; +err_of_depopulate: + of_platform_depopulate(&pdev->dev); + err_uninit_debugfs: dss_debugfs_remove_file(dss->debugfs.clk); dss_debugfs_remove_file(dss->debugfs.dss); @@ -1522,6 +1529,8 @@ static int dss_remove(struct platform_device *pdev) { struct dss_device *dss = platform_get_drvdata(pdev); + of_platform_depopulate(&pdev->dev); + component_master_del(&pdev->dev, &dss_component_ops); dss_debugfs_remove_file(dss->debugfs.clk); From f8523b64d2d2f94bb429c15166d7601d39243c4d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 10 Nov 2018 13:16:52 +0200 Subject: [PATCH 443/726] drm/omap: hdmi4: Ensure the device is active during bind The bind function performs hardware access (in hdmi4_cec_init()) and thus requires the device to be active. Ensure this by surrounding the bind function by hdmi_runtime_get() and hdmi_runtime_put() calls. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-3-laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/omapdrm/dss/hdmi4.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c index cf6230eac31a..073fa462930a 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c @@ -635,10 +635,14 @@ static int hdmi4_bind(struct device *dev, struct device *master, void *data) hdmi->dss = dss; - r = hdmi_pll_init(dss, hdmi->pdev, &hdmi->pll, &hdmi->wp); + r = hdmi_runtime_get(hdmi); if (r) return r; + r = hdmi_pll_init(dss, hdmi->pdev, &hdmi->pll, &hdmi->wp); + if (r) + goto err_runtime_put; + r = hdmi4_cec_init(hdmi->pdev, &hdmi->core, &hdmi->wp); if (r) goto err_pll_uninit; @@ -652,12 +656,16 @@ static int hdmi4_bind(struct device *dev, struct device *master, void *data) hdmi->debugfs = dss_debugfs_create_file(dss, "hdmi", hdmi_dump_regs, hdmi); + hdmi_runtime_put(hdmi); + return 0; err_cec_uninit: hdmi4_cec_uninit(&hdmi->core); err_pll_uninit: hdmi_pll_uninit(&hdmi->pll); +err_runtime_put: + hdmi_runtime_put(hdmi); return r; } From 350c03e880038bf60184500bab9025d3361c0b0e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 10 Nov 2018 13:16:53 +0200 Subject: [PATCH 444/726] drm/omap: dsi: Ensure the device is active during probe The probe function performs hardware access to read the number of supported data lanes from a configuration register and thus requires the device to be active. Ensure this by surrounding the access with dsi_runtime_get() and dsi_runtime_put() calls. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart Acked-by: Tony Lindgren Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/omapdrm/dss/dsi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index 394c129cfb3b..b9d5ad7e67d8 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -5409,11 +5409,14 @@ static int dsi_probe(struct platform_device *pdev) /* DSI on OMAP3 doesn't have register DSI_GNQ, set number * of data to 3 by default */ - if (dsi->data->quirks & DSI_QUIRK_GNQ) + if (dsi->data->quirks & DSI_QUIRK_GNQ) { + dsi_runtime_get(dsi); /* NB_DATA_LANES */ dsi->num_lanes_supported = 1 + REG_GET(dsi, DSI_GNQ, 11, 9); - else + dsi_runtime_put(dsi); + } else { dsi->num_lanes_supported = 3; + } r = dsi_init_output(dsi); if (r) From 24ec84e854c68ceda59a26027114eb7f260f9411 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 10 Nov 2018 13:16:54 +0200 Subject: [PATCH 445/726] drm/omap: Move DISPC runtime PM handling to omapdrm The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers attempt to manage the runtime PM state of the connected DISPC, based on the rationale that the DISPC providing data to the encoders requires ensuring that the display is active whenever the encoders are active. While the DISPC provides data to the encoders, it doesn't as such constitute a resource that encoders require in order to be taken out of suspend, contrary to for instance a functional clock or a power supply. Encoders registers can be accessed without the DISPC being active, and while the encoders will not output any video stream without being fed by the DISPC, the DISPC PM state doesn't influence the encoders PM state. For this reason the DISPC PM state is better managed from the omapdrm driver, in the CRTC enable and disable operations. This allows the encoders PM state to be handled separately from the DISPC, and in particular at times when the DISPC may not be available (for instance at probe due to the DSS probe being deferred, or at remove time du to the DISPC being already removed). Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/omapdrm/dss/dsi.c | 7 ------- drivers/gpu/drm/omapdrm/dss/hdmi4.c | 27 --------------------------- drivers/gpu/drm/omapdrm/dss/hdmi5.c | 27 --------------------------- drivers/gpu/drm/omapdrm/dss/venc.c | 7 ------- drivers/gpu/drm/omapdrm/omap_crtc.c | 6 ++++++ 5 files changed, 6 insertions(+), 68 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index b9d5ad7e67d8..36123c086d97 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -5473,19 +5473,12 @@ static int dsi_runtime_suspend(struct device *dev) /* wait for current handler to finish before turning the DSI off */ synchronize_irq(dsi->irq); - dispc_runtime_put(dsi->dss->dispc); - return 0; } static int dsi_runtime_resume(struct device *dev) { struct dsi_data *dsi = dev_get_drvdata(dev); - int r; - - r = dispc_runtime_get(dsi->dss->dispc); - if (r) - return r; dsi->is_enabled = true; /* ensure the irq handler sees the is_enabled value */ diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c index 073fa462930a..aabdda394c9c 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c @@ -841,32 +841,6 @@ static int hdmi4_remove(struct platform_device *pdev) return 0; } -static int hdmi_runtime_suspend(struct device *dev) -{ - struct omap_hdmi *hdmi = dev_get_drvdata(dev); - - dispc_runtime_put(hdmi->dss->dispc); - - return 0; -} - -static int hdmi_runtime_resume(struct device *dev) -{ - struct omap_hdmi *hdmi = dev_get_drvdata(dev); - int r; - - r = dispc_runtime_get(hdmi->dss->dispc); - if (r < 0) - return r; - - return 0; -} - -static const struct dev_pm_ops hdmi_pm_ops = { - .runtime_suspend = hdmi_runtime_suspend, - .runtime_resume = hdmi_runtime_resume, -}; - static const struct of_device_id hdmi_of_match[] = { { .compatible = "ti,omap4-hdmi", }, {}, @@ -877,7 +851,6 @@ struct platform_driver omapdss_hdmi4hw_driver = { .remove = hdmi4_remove, .driver = { .name = "omapdss_hdmi", - .pm = &hdmi_pm_ops, .of_match_table = hdmi_of_match, .suppress_bind_attrs = true, }, diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c index b0e4a7463f8c..9e8556f67a29 100644 --- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c @@ -825,32 +825,6 @@ static int hdmi5_remove(struct platform_device *pdev) return 0; } -static int hdmi_runtime_suspend(struct device *dev) -{ - struct omap_hdmi *hdmi = dev_get_drvdata(dev); - - dispc_runtime_put(hdmi->dss->dispc); - - return 0; -} - -static int hdmi_runtime_resume(struct device *dev) -{ - struct omap_hdmi *hdmi = dev_get_drvdata(dev); - int r; - - r = dispc_runtime_get(hdmi->dss->dispc); - if (r < 0) - return r; - - return 0; -} - -static const struct dev_pm_ops hdmi_pm_ops = { - .runtime_suspend = hdmi_runtime_suspend, - .runtime_resume = hdmi_runtime_resume, -}; - static const struct of_device_id hdmi_of_match[] = { { .compatible = "ti,omap5-hdmi", }, { .compatible = "ti,dra7-hdmi", }, @@ -862,7 +836,6 @@ struct platform_driver omapdss_hdmi5hw_driver = { .remove = hdmi5_remove, .driver = { .name = "omapdss_hdmi5", - .pm = &hdmi_pm_ops, .of_match_table = hdmi_of_match, .suppress_bind_attrs = true, }, diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c index ff0b18c8e4ac..b5f52727f8b1 100644 --- a/drivers/gpu/drm/omapdrm/dss/venc.c +++ b/drivers/gpu/drm/omapdrm/dss/venc.c @@ -946,19 +946,12 @@ static int venc_runtime_suspend(struct device *dev) if (venc->tv_dac_clk) clk_disable_unprepare(venc->tv_dac_clk); - dispc_runtime_put(venc->dss->dispc); - return 0; } static int venc_runtime_resume(struct device *dev) { struct venc_device *venc = dev_get_drvdata(dev); - int r; - - r = dispc_runtime_get(venc->dss->dispc); - if (r < 0) - return r; if (venc->tv_dac_clk) clk_prepare_enable(venc->tv_dac_clk); diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c index 62928ec0e7db..caffc547ef97 100644 --- a/drivers/gpu/drm/omapdrm/omap_crtc.c +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -350,11 +350,14 @@ static void omap_crtc_arm_event(struct drm_crtc *crtc) static void omap_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct omap_drm_private *priv = crtc->dev->dev_private; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); int ret; DBG("%s", omap_crtc->name); + priv->dispc_ops->runtime_get(priv->dispc); + spin_lock_irq(&crtc->dev->event_lock); drm_crtc_vblank_on(crtc); ret = drm_crtc_vblank_get(crtc); @@ -367,6 +370,7 @@ static void omap_crtc_atomic_enable(struct drm_crtc *crtc, static void omap_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct omap_drm_private *priv = crtc->dev->dev_private; struct omap_crtc *omap_crtc = to_omap_crtc(crtc); DBG("%s", omap_crtc->name); @@ -379,6 +383,8 @@ static void omap_crtc_atomic_disable(struct drm_crtc *crtc, spin_unlock_irq(&crtc->dev->event_lock); drm_crtc_vblank_off(crtc); + + priv->dispc_ops->runtime_put(priv->dispc); } static enum drm_mode_status omap_crtc_mode_valid(struct drm_crtc *crtc, From cbed7545db7ae5907d7dc9d4002717d46cae29e9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 6 Nov 2018 07:28:02 -0800 Subject: [PATCH 446/726] drm/omap: dsi: Fix missing of_platform_depopulate() We're missing a call to of_platform_depopulate() on errors for dsi. Looks like dss is already doing this. Signed-off-by: Tony Lindgren Reviewed-by: Laurent Pinchart Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com --- drivers/gpu/drm/omapdrm/dss/dsi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index 36123c086d97..0a485c5b982e 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -5429,15 +5429,19 @@ static int dsi_probe(struct platform_device *pdev) } r = of_platform_populate(dev->of_node, NULL, NULL, dev); - if (r) + if (r) { DSSERR("Failed to populate DSI child devices: %d\n", r); + goto err_uninit_output; + } r = component_add(&pdev->dev, &dsi_component_ops); if (r) - goto err_uninit_output; + goto err_of_depopulate; return 0; +err_of_depopulate: + of_platform_depopulate(dev); err_uninit_output: dsi_uninit_output(dsi); err_pm_disable: From 899a42f836678a595f7d2bc36a5a0c2b03d08cbc Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jul 2018 11:42:36 +0100 Subject: [PATCH 447/726] ARM: make lookup_processor_type() non-__init Move lookup_processor_type() out of the __init section so it is callable from (eg) the secondary startup code during hotplug. Reviewed-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 6e0375e7db05..997b02302c31 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -145,6 +145,9 @@ __mmap_switched_data: #endif .size __mmap_switched_data, . - __mmap_switched_data + __FINIT + .text + /* * This provides a C-API version of __lookup_processor_type */ @@ -156,9 +159,6 @@ ENTRY(lookup_processor_type) ldmfd sp!, {r4 - r6, r9, pc} ENDPROC(lookup_processor_type) - __FINIT - .text - /* * Read processor ID register (CP#15, CR0), and look up in the linker-built * supported processor list. Note that we can't use the absolute addresses From 65987a8553061515b5851b472081aedb9837a391 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jul 2018 11:59:56 +0100 Subject: [PATCH 448/726] ARM: split out processor lookup Split out the lookup of the processor type and associated error handling from the rest of setup_processor() - we will need to use this in the secondary CPU bringup path for big.Little Spectre variant 2 mitigation. Reviewed-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 1 + arch/arm/kernel/setup.c | 35 ++++++++++++++++++++-------------- 2 files changed, 22 insertions(+), 14 deletions(-) diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 26021980504d..f6df4bb4e543 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -107,6 +107,7 @@ #define ARM_CPU_PART_SCORPION 0x510002d0 extern unsigned int processor_id; +struct proc_info_list *lookup_processor(u32 midr); #ifdef CONFIG_CPU_CP15 #define read_cpuid(reg) \ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index fc40a2b40595..05a4eb6b0d01 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -667,21 +667,28 @@ static void __init smp_build_mpidr_hash(void) } #endif +/* + * locate processor in the list of supported processor types. The linker + * builds this table for us from the entries in arch/arm/mm/proc-*.S + */ +struct proc_info_list *lookup_processor(u32 midr) +{ + struct proc_info_list *list = lookup_processor_type(midr); + + if (!list) { + pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n", + smp_processor_id(), midr); + while (1) + /* can't use cpu_relax() here as it may require MMU setup */; + } + + return list; +} + static void __init setup_processor(void) { - struct proc_info_list *list; - - /* - * locate processor in the list of supported processor - * types. The linker builds this table for us from the - * entries in arch/arm/mm/proc-*.S - */ - list = lookup_processor_type(read_cpuid_id()); - if (!list) { - pr_err("CPU configuration botched (ID %08x), unable to continue.\n", - read_cpuid_id()); - while (1); - } + unsigned int midr = read_cpuid_id(); + struct proc_info_list *list = lookup_processor(midr); cpu_name = list->cpu_name; __cpu_architecture = __get_cpu_architecture(); @@ -700,7 +707,7 @@ static void __init setup_processor(void) #endif pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", - cpu_name, read_cpuid_id(), read_cpuid_id() & 15, + list->cpu_name, midr, midr & 15, proc_arch[cpu_architecture()], get_cr()); snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", From 945aceb1db8885d3a35790cf2e810f681db52756 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jul 2018 12:43:03 +0100 Subject: [PATCH 449/726] ARM: clean up per-processor check_bugs method call Call the per-processor type check_bugs() method in the same way as we do other per-processor functions - move the "processor." detail into proc-fns.h. Reviewed-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/include/asm/proc-fns.h | 1 + arch/arm/kernel/bugs.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index e25f4392e1b2..30c499146320 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -99,6 +99,7 @@ extern void cpu_do_suspend(void *); extern void cpu_do_resume(void *); #else #define cpu_proc_init processor._proc_init +#define cpu_check_bugs processor.check_bugs #define cpu_proc_fin processor._proc_fin #define cpu_reset processor.reset #define cpu_do_idle processor._do_idle diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c index 7be511310191..d41d3598e5e5 100644 --- a/arch/arm/kernel/bugs.c +++ b/arch/arm/kernel/bugs.c @@ -6,8 +6,8 @@ void check_other_bugs(void) { #ifdef MULTI_CPU - if (processor.check_bugs) - processor.check_bugs(); + if (cpu_check_bugs) + cpu_check_bugs(); #endif } From e209950fdd065d2cc46e6338e47e52841b830cba Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jul 2018 12:17:38 +0100 Subject: [PATCH 450/726] ARM: add PROC_VTABLE and PROC_TABLE macros Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/include/asm/proc-fns.h | 39 ++++++++++++++++++++++----------- arch/arm/kernel/setup.c | 4 +--- 2 files changed, 27 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 30c499146320..c259cc49c641 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -23,7 +23,7 @@ struct mm_struct; /* * Don't change this structure - ASM code relies on it. */ -extern struct processor { +struct processor { /* MISC * get data abort address/flags */ @@ -79,9 +79,13 @@ extern struct processor { unsigned int suspend_size; void (*do_suspend)(void *); void (*do_resume)(void *); -} processor; +}; #ifndef MULTI_CPU +static inline void init_proc_vtable(const struct processor *p) +{ +} + extern void cpu_proc_init(void); extern void cpu_proc_fin(void); extern int cpu_do_idle(void); @@ -98,18 +102,27 @@ extern void cpu_reset(unsigned long addr, bool hvc) __attribute__((noreturn)); extern void cpu_do_suspend(void *); extern void cpu_do_resume(void *); #else -#define cpu_proc_init processor._proc_init -#define cpu_check_bugs processor.check_bugs -#define cpu_proc_fin processor._proc_fin -#define cpu_reset processor.reset -#define cpu_do_idle processor._do_idle -#define cpu_dcache_clean_area processor.dcache_clean_area -#define cpu_set_pte_ext processor.set_pte_ext -#define cpu_do_switch_mm processor.switch_mm -/* These three are private to arch/arm/kernel/suspend.c */ -#define cpu_do_suspend processor.do_suspend -#define cpu_do_resume processor.do_resume +extern struct processor processor; +#define PROC_VTABLE(f) processor.f +#define PROC_TABLE(f) processor.f +static inline void init_proc_vtable(const struct processor *p) +{ + processor = *p; +} + +#define cpu_proc_init PROC_VTABLE(_proc_init) +#define cpu_check_bugs PROC_VTABLE(check_bugs) +#define cpu_proc_fin PROC_VTABLE(_proc_fin) +#define cpu_reset PROC_VTABLE(reset) +#define cpu_do_idle PROC_VTABLE(_do_idle) +#define cpu_dcache_clean_area PROC_TABLE(dcache_clean_area) +#define cpu_set_pte_ext PROC_TABLE(set_pte_ext) +#define cpu_do_switch_mm PROC_VTABLE(switch_mm) + +/* These two are private to arch/arm/kernel/suspend.c */ +#define cpu_do_suspend PROC_VTABLE(do_suspend) +#define cpu_do_resume PROC_VTABLE(do_resume) #endif extern void cpu_resume(void); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 05a4eb6b0d01..c214bd14a1fe 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -693,9 +693,7 @@ static void __init setup_processor(void) cpu_name = list->cpu_name; __cpu_architecture = __get_cpu_architecture(); -#ifdef MULTI_CPU - processor = *list->proc; -#endif + init_proc_vtable(list->proc); #ifdef MULTI_TLB cpu_tlb = *list->tlb; #endif From 5df7a99bdd0de4a0480320264c44c04543c29d5a Mon Sep 17 00:00:00 2001 From: Julien Thierry Date: Thu, 8 Nov 2018 17:25:28 +0100 Subject: [PATCH 451/726] ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by: David Binderman Signed-off-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3b75f1d8a491..15bc3cf2a7fd 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -579,7 +579,7 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp, */ ufp_exc->fpexc = hwstate->fpexc; ufp_exc->fpinst = hwstate->fpinst; - ufp_exc->fpinst2 = ufp_exc->fpinst2; + ufp_exc->fpinst2 = hwstate->fpinst2; /* Ensure that VFP is disabled. */ vfp_flush_hwstate(thread); From 383fb3ee8024d596f488d2dbaf45e572897acbdb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jul 2018 12:21:31 +0100 Subject: [PATCH 452/726] ARM: spectre-v2: per-CPU vtables to work around big.Little systems In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by: Julien Thierry Signed-off-by: Russell King --- arch/arm/include/asm/proc-fns.h | 23 +++++++++++++++++++++++ arch/arm/kernel/setup.c | 5 +++++ arch/arm/kernel/smp.c | 31 +++++++++++++++++++++++++++++++ arch/arm/mm/proc-v7-bugs.c | 17 ++--------------- 4 files changed, 61 insertions(+), 15 deletions(-) diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index c259cc49c641..e1b6f280ab08 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -104,12 +104,35 @@ extern void cpu_do_resume(void *); #else extern struct processor processor; +#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR) +#include +/* + * This can't be a per-cpu variable because we need to access it before + * per-cpu has been initialised. We have a couple of functions that are + * called in a pre-emptible context, and so can't use smp_processor_id() + * there, hence PROC_TABLE(). We insist in init_proc_vtable() that the + * function pointers for these are identical across all CPUs. + */ +extern struct processor *cpu_vtable[]; +#define PROC_VTABLE(f) cpu_vtable[smp_processor_id()]->f +#define PROC_TABLE(f) cpu_vtable[0]->f +static inline void init_proc_vtable(const struct processor *p) +{ + unsigned int cpu = smp_processor_id(); + *cpu_vtable[cpu] = *p; + WARN_ON_ONCE(cpu_vtable[cpu]->dcache_clean_area != + cpu_vtable[0]->dcache_clean_area); + WARN_ON_ONCE(cpu_vtable[cpu]->set_pte_ext != + cpu_vtable[0]->set_pte_ext); +} +#else #define PROC_VTABLE(f) processor.f #define PROC_TABLE(f) processor.f static inline void init_proc_vtable(const struct processor *p) { processor = *p; } +#endif #define cpu_proc_init PROC_VTABLE(_proc_init) #define cpu_check_bugs PROC_VTABLE(check_bugs) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c214bd14a1fe..cd46a595422c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -115,6 +115,11 @@ EXPORT_SYMBOL(elf_hwcap2); #ifdef MULTI_CPU struct processor processor __ro_after_init; +#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR) +struct processor *cpu_vtable[NR_CPUS] = { + [0] = &processor, +}; +#endif #endif #ifdef MULTI_TLB struct cpu_tlb_fns cpu_tlb __ro_after_init; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 5ad0b67b9e33..82b879db32ee 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -102,6 +103,30 @@ static unsigned long get_arch_pgd(pgd_t *pgd) #endif } +#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR) +static int secondary_biglittle_prepare(unsigned int cpu) +{ + if (!cpu_vtable[cpu]) + cpu_vtable[cpu] = kzalloc(sizeof(*cpu_vtable[cpu]), GFP_KERNEL); + + return cpu_vtable[cpu] ? 0 : -ENOMEM; +} + +static void secondary_biglittle_init(void) +{ + init_proc_vtable(lookup_processor(read_cpuid_id())->proc); +} +#else +static int secondary_biglittle_prepare(unsigned int cpu) +{ + return 0; +} + +static void secondary_biglittle_init(void) +{ +} +#endif + int __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -109,6 +134,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) if (!smp_ops.smp_boot_secondary) return -ENOSYS; + ret = secondary_biglittle_prepare(cpu); + if (ret) + return ret; + /* * We need to tell the secondary core where to find * its stack and the page tables. @@ -360,6 +389,8 @@ asmlinkage void secondary_start_kernel(void) struct mm_struct *mm = &init_mm; unsigned int cpu; + secondary_biglittle_init(); + /* * The identity mapping is uncached (strongly ordered), so * switch away from it before attempting any exclusive accesses. diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index 5544b82a2e7a..9a07916af8dd 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -52,8 +52,6 @@ static void cpu_v7_spectre_init(void) case ARM_CPU_PART_CORTEX_A17: case ARM_CPU_PART_CORTEX_A73: case ARM_CPU_PART_CORTEX_A75: - if (processor.switch_mm != cpu_v7_bpiall_switch_mm) - goto bl_error; per_cpu(harden_branch_predictor_fn, cpu) = harden_branch_predictor_bpiall; spectre_v2_method = "BPIALL"; @@ -61,8 +59,6 @@ static void cpu_v7_spectre_init(void) case ARM_CPU_PART_CORTEX_A15: case ARM_CPU_PART_BRAHMA_B15: - if (processor.switch_mm != cpu_v7_iciallu_switch_mm) - goto bl_error; per_cpu(harden_branch_predictor_fn, cpu) = harden_branch_predictor_iciallu; spectre_v2_method = "ICIALLU"; @@ -88,11 +84,9 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu) - goto bl_error; per_cpu(harden_branch_predictor_fn, cpu) = call_hvc_arch_workaround_1; - processor.switch_mm = cpu_v7_hvc_switch_mm; + cpu_do_switch_mm = cpu_v7_hvc_switch_mm; spectre_v2_method = "hypervisor"; break; @@ -101,11 +95,9 @@ static void cpu_v7_spectre_init(void) ARM_SMCCC_ARCH_WORKAROUND_1, &res); if ((int)res.a0 != 0) break; - if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu) - goto bl_error; per_cpu(harden_branch_predictor_fn, cpu) = call_smc_arch_workaround_1; - processor.switch_mm = cpu_v7_smc_switch_mm; + cpu_do_switch_mm = cpu_v7_smc_switch_mm; spectre_v2_method = "firmware"; break; @@ -119,11 +111,6 @@ static void cpu_v7_spectre_init(void) if (spectre_v2_method) pr_info("CPU%u: Spectre v2: using %s workaround\n", smp_processor_id(), spectre_v2_method); - return; - -bl_error: - pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n", - cpu); } #else static void cpu_v7_spectre_init(void) From d99501b8575dc1248bacf1b58d2241cb4b265d49 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Nov 2018 12:26:57 +0100 Subject: [PATCH 453/726] ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap() We need to call pci_iounmap() instead of iounmap() for the regions obtained via pci_iomap() call for some archs that need special treatment. Fixes: aa31704fd81c ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ") Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 0a24037184c3..bdbbc51e8d18 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -8413,7 +8413,7 @@ static void ca0132_free(struct hda_codec *codec) snd_hda_power_down(codec); if (spec->mem_base) - iounmap(spec->mem_base); + pci_iounmap(codec->bus->pci, spec->mem_base); kfree(spec->spec_init_verbs); kfree(codec->spec); } From ab99be4683d9db33b100497d463274ebd23bd67e Mon Sep 17 00:00:00 2001 From: Filippo Sironi Date: Mon, 12 Nov 2018 12:26:30 +0000 Subject: [PATCH 454/726] amd/iommu: Fix Guest Virtual APIC Log Tail Address Register This register should have been programmed with the physical address of the memory location containing the shadow tail pointer for the guest virtual APIC log instead of the base address. Fixes: 8bda0cfbdc1a ('iommu/amd: Detect and initialize guest vAPIC log') Signed-off-by: Filippo Sironi Signed-off-by: Wei Wang Signed-off-by: Suravee Suthikulpanit Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index bb2cd29e1658..d8f7000a466a 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -797,7 +797,8 @@ static int iommu_init_ga_log(struct amd_iommu *iommu) entry = iommu_virt_to_phys(iommu->ga_log) | GA_LOG_SIZE_512; memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_BASE_OFFSET, &entry, sizeof(entry)); - entry = (iommu_virt_to_phys(iommu->ga_log) & 0xFFFFFFFFFFFFFULL) & ~7ULL; + entry = (iommu_virt_to_phys(iommu->ga_log_tail) & + (BIT_ULL(52)-1)) & ~7ULL; memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_TAIL_OFFSET, &entry, sizeof(entry)); writel(0x00, iommu->mmio_base + MMIO_GA_HEAD_OFFSET); From fb5bbae9b1333d44023713946fdd28db0cd85751 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 5 Nov 2018 09:43:05 +0000 Subject: [PATCH 455/726] drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk (cherry picked from commit 55f99bf2a9c331838c981694bc872cd1ec4070b2) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_ringbuffer.c | 38 +++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index d0ef50bf930a..187bb0ceb4ac 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -91,6 +91,7 @@ static int gen4_render_ring_flush(struct i915_request *rq, u32 mode) { u32 cmd, *cs; + int i; /* * read/write caches: @@ -127,12 +128,45 @@ gen4_render_ring_flush(struct i915_request *rq, u32 mode) cmd |= MI_INVALIDATE_ISP; } - cs = intel_ring_begin(rq, 2); + i = 2; + if (mode & EMIT_INVALIDATE) + i += 20; + + cs = intel_ring_begin(rq, i); if (IS_ERR(cs)) return PTR_ERR(cs); *cs++ = cmd; - *cs++ = MI_NOOP; + + /* + * A random delay to let the CS invalidate take effect? Without this + * delay, the GPU relocation path fails as the CS does not see + * the updated contents. Just as important, if we apply the flushes + * to the EMIT_FLUSH branch (i.e. immediately after the relocation + * write and before the invalidate on the next batch), the relocations + * still fail. This implies that is a delay following invalidation + * that is required to reset the caches as opposed to a delay to + * ensure the memory is written. + */ + if (mode & EMIT_INVALIDATE) { + *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE; + *cs++ = i915_ggtt_offset(rq->engine->scratch) | + PIPE_CONTROL_GLOBAL_GTT; + *cs++ = 0; + *cs++ = 0; + + for (i = 0; i < 12; i++) + *cs++ = MI_FLUSH; + + *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE; + *cs++ = i915_ggtt_offset(rq->engine->scratch) | + PIPE_CONTROL_GLOBAL_GTT; + *cs++ = 0; + *cs++ = 0; + } + + *cs++ = cmd; + intel_ring_advance(rq, cs); return 0; From 7c4512300cfa5a4dcc8c1c52ae61e3fa4bd11a39 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 6 Nov 2018 16:30:12 -0500 Subject: [PATCH 456/726] drm/i915: Fix possible race in intel_dp_add_mst_connector() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul Reviewed-by: Ville Syrjälä Cc: Rodrigo Vivi Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com (cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_dp_mst.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c index 1b00f8ea145b..a911691dbd0f 100644 --- a/drivers/gpu/drm/i915/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/intel_dp_mst.c @@ -452,6 +452,10 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo if (!intel_connector) return NULL; + intel_connector->get_hw_state = intel_dp_mst_get_hw_state; + intel_connector->mst_port = intel_dp; + intel_connector->port = port; + connector = &intel_connector->base; ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs, DRM_MODE_CONNECTOR_DisplayPort); @@ -462,10 +466,6 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); - intel_connector->get_hw_state = intel_dp_mst_get_hw_state; - intel_connector->mst_port = intel_dp; - intel_connector->port = port; - for_each_pipe(dev_priv, pipe) { struct drm_encoder *enc = &intel_dp->mst_encoders[pipe]->base.base; From 541ff7e96c13cd5d67f6021d233f8e1c3df49278 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 6 Nov 2018 16:30:13 -0500 Subject: [PATCH 457/726] drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: Lyude Paul Reviewed-by: Ville Syrjälä Cc: stable@vger.kernel.org Cc: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com (cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_hotplug.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c index 648a13c6043c..8326900a311e 100644 --- a/drivers/gpu/drm/i915/intel_hotplug.c +++ b/drivers/gpu/drm/i915/intel_hotplug.c @@ -228,7 +228,9 @@ static void intel_hpd_irq_storm_reenable_work(struct work_struct *work) drm_for_each_connector_iter(connector, &conn_iter) { struct intel_connector *intel_connector = to_intel_connector(connector); - if (intel_connector->encoder->hpd_pin == pin) { + /* Don't check MST ports, they don't have pins */ + if (!intel_connector->mst_port && + intel_connector->encoder->hpd_pin == pin) { if (connector->polled != intel_connector->polled) DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n", connector->name); From c4f224076d00ccf30c7bd3561cceaed82628c8ce Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 2 Nov 2018 20:22:00 +0200 Subject: [PATCH 458/726] drm/i915/icl: Fix power well 2 wrt. DC-off toggling order MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To enable DC5/6 power well 2 has to be disabled as for previous platforms, so fix things up. Bspec: 4234 Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support") Cc: Animesh Manna Cc: Paulo Zanoni Cc: Ville Syrjälä Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181102182200.17219-1-imre.deak@intel.com (cherry picked from commit a33e1ece777996ddddb1f23a30f8c66422ed0b68) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_runtime_pm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 0fdabce647ab..0a4990d8843c 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -2748,6 +2748,12 @@ static const struct i915_power_well_desc icl_power_wells[] = { .hsw.has_fuses = true, }, }, + { + .name = "DC off", + .domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS, + .ops = &gen9_dc_off_power_well_ops, + .id = DISP_PW_ID_NONE, + }, { .name = "power well 2", .domains = ICL_PW_2_POWER_DOMAINS, @@ -2759,12 +2765,6 @@ static const struct i915_power_well_desc icl_power_wells[] = { .hsw.has_fuses = true, }, }, - { - .name = "DC off", - .domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS, - .ops = &gen9_dc_off_power_well_ops, - .id = DISP_PW_ID_NONE, - }, { .name = "power well 3", .domains = ICL_PW_3_POWER_DOMAINS, From 0a823e8fd4fd67726697854578f3584ee3a49b1d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 8 Nov 2018 08:17:38 +0000 Subject: [PATCH 459/726] drm/i915/execlists: Force write serialisation into context image vs execution Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887 Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Tvrtko Ursulin Acked-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_lrc.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 43957bb37a42..37c94a54efcb 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -424,7 +424,8 @@ static u64 execlists_update_context(struct i915_request *rq) reg_state[CTX_RING_TAIL+1] = intel_ring_set_tail(rq->ring, rq->tail); - /* True 32b PPGTT with dynamic page allocation: update PDP + /* + * True 32b PPGTT with dynamic page allocation: update PDP * registers and point the unallocated PDPs to scratch page. * PML4 is allocated during ppgtt init, so this is not needed * in 48-bit mode. @@ -432,6 +433,17 @@ static u64 execlists_update_context(struct i915_request *rq) if (ppgtt && !i915_vm_is_48bit(&ppgtt->vm)) execlists_update_context_pdps(ppgtt, reg_state); + /* + * Make sure the context image is complete before we submit it to HW. + * + * Ostensibly, writes (including the WCB) should be flushed prior to + * an uncached write such as our mmio register access, the empirical + * evidence (esp. on Braswell) suggests that the WC write into memory + * may not be visible to the HW prior to the completion of the UC + * register write and that we may begin execution from the context + * before its image is complete leading to invalid PD chasing. + */ + wmb(); return ce->lrc_desc; } From 44a7276b30c3c15f2b7790a5729640597fb6a1df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 12 Nov 2018 15:36:16 +0200 Subject: [PATCH 460/726] drm/i915: Fix hpd handling for pins with two encoders MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: stable@vger.kernel.org # 4.19+ Cc: Lyude Paul Cc: Rodrigo Vivi Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul (cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_hotplug.c | 70 +++++++++++++++++++--------- 1 file changed, 49 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c index 8326900a311e..9a8018130237 100644 --- a/drivers/gpu/drm/i915/intel_hotplug.c +++ b/drivers/gpu/drm/i915/intel_hotplug.c @@ -397,37 +397,54 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv, struct intel_encoder *encoder; bool storm_detected = false; bool queue_dig = false, queue_hp = false; + u32 long_hpd_pulse_mask = 0; + u32 short_hpd_pulse_mask = 0; + enum hpd_pin pin; if (!pin_mask) return; spin_lock(&dev_priv->irq_lock); - for_each_intel_encoder(&dev_priv->drm, encoder) { - enum hpd_pin pin = encoder->hpd_pin; - bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder); + /* + * Determine whether ->hpd_pulse() exists for each pin, and + * whether we have a short or a long pulse. This is needed + * as each pin may have up to two encoders (HDMI and DP) and + * only the one of them (DP) will have ->hpd_pulse(). + */ + for_each_intel_encoder(&dev_priv->drm, encoder) { + bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder); + enum port port = encoder->port; + bool long_hpd; + + pin = encoder->hpd_pin; if (!(BIT(pin) & pin_mask)) continue; - if (has_hpd_pulse) { - bool long_hpd = long_mask & BIT(pin); - enum port port = encoder->port; + if (!has_hpd_pulse) + continue; - DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port), - long_hpd ? "long" : "short"); - /* - * For long HPD pulses we want to have the digital queue happen, - * but we still want HPD storm detection to function. - */ - queue_dig = true; - if (long_hpd) { - dev_priv->hotplug.long_port_mask |= (1 << port); - } else { - /* for short HPD just trigger the digital queue */ - dev_priv->hotplug.short_port_mask |= (1 << port); - continue; - } + long_hpd = long_mask & BIT(pin); + + DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port), + long_hpd ? "long" : "short"); + queue_dig = true; + + if (long_hpd) { + long_hpd_pulse_mask |= BIT(pin); + dev_priv->hotplug.long_port_mask |= BIT(port); + } else { + short_hpd_pulse_mask |= BIT(pin); + dev_priv->hotplug.short_port_mask |= BIT(port); } + } + + /* Now process each pin just once */ + for_each_hpd_pin(pin) { + bool long_hpd; + + if (!(BIT(pin) & pin_mask)) + continue; if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) { /* @@ -444,11 +461,22 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv, if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED) continue; - if (!has_hpd_pulse) { + /* + * Delegate to ->hpd_pulse() if one of the encoders for this + * pin has it, otherwise let the hotplug_work deal with this + * pin directly. + */ + if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) { + long_hpd = long_hpd_pulse_mask & BIT(pin); + } else { dev_priv->hotplug.event_bits |= BIT(pin); + long_hpd = true; queue_hp = true; } + if (!long_hpd) + continue; + if (intel_hpd_irq_storm_detect(dev_priv, pin)) { dev_priv->hotplug.event_bits &= ~BIT(pin); storm_detected = true; From 18e962ac0781bcb70d433de3b2a325ff792b4288 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Mon, 12 Nov 2018 00:08:46 -0800 Subject: [PATCH 461/726] kyber: fix wrong strlcpy() size in trace_kyber_latency() When copying to the latency type, we should be passing LATENCY_TYPE_LEN, not DOMAIN_LEN (this isn't a problem in practice because we only pass "total" or "I/O"). Fix it by changing all of the strlcpy() calls to use sizeof(). Fixes: 6c3b7af1c975 ("kyber: add tracepoints") Reported-by: Jordan Glover Tested-by: Jordan Glover Signed-off-by: Omar Sandoval Signed-off-by: Jens Axboe --- include/trace/events/kyber.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/trace/events/kyber.h b/include/trace/events/kyber.h index a9834c37ac40..c0e7d24ca256 100644 --- a/include/trace/events/kyber.h +++ b/include/trace/events/kyber.h @@ -31,8 +31,8 @@ TRACE_EVENT(kyber_latency, TP_fast_assign( __entry->dev = disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent))); - strlcpy(__entry->domain, domain, DOMAIN_LEN); - strlcpy(__entry->type, type, DOMAIN_LEN); + strlcpy(__entry->domain, domain, sizeof(__entry->domain)); + strlcpy(__entry->type, type, sizeof(__entry->type)); __entry->percentile = percentile; __entry->numerator = numerator; __entry->denominator = denominator; @@ -60,7 +60,7 @@ TRACE_EVENT(kyber_adjust, TP_fast_assign( __entry->dev = disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent))); - strlcpy(__entry->domain, domain, DOMAIN_LEN); + strlcpy(__entry->domain, domain, sizeof(__entry->domain)); __entry->depth = depth; ), @@ -82,7 +82,7 @@ TRACE_EVENT(kyber_throttled, TP_fast_assign( __entry->dev = disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent))); - strlcpy(__entry->domain, domain, DOMAIN_LEN); + strlcpy(__entry->domain, domain, sizeof(__entry->domain)); ), TP_printk("%d,%d %s", MAJOR(__entry->dev), MINOR(__entry->dev), From 77e461d14ed141253573eeeb4d34eccc51e38328 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Sun, 11 Nov 2018 18:27:34 -0800 Subject: [PATCH 462/726] bnx2x: Assign unique DMAE channel number for FW DMAE transactions. Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 7 +++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 + 2 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index be1506169076..0de487a8f0eb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2191,6 +2191,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, #define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ E1HVN_MAX) +/* Following is the DMAE channel number allocation for the clients. + * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively. + * Driver: 0-3 and 8-11 (for PF dmae operations) + * 4 and 12 (for stats requests) + */ +#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */ + /* PCIE link and speed */ #define PCICFG_LINK_WIDTH 0x1f00000 #define PCICFG_LINK_WIDTH_SHIFT 20 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 3f4d2c8da21a..a9eaaf3e73a4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -6149,6 +6149,7 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp, rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag); rdata->path_id = BP_PATH(bp); rdata->network_cos_mode = start_params->network_cos_mode; + rdata->dmae_cmd_id = BNX2X_FW_DMAE_C; rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port); rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port); From ca474b73896bf6e0c1eb8787eb217b0f80221610 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 12 Nov 2018 10:35:25 -0700 Subject: [PATCH 463/726] block: copy ioprio in __bio_clone_fast() and bounce We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3ff0a ("block: move bio io prio to a new field") Signed-off-by: Hannes Reinecke Signed-off-by: Jean Delvare Fixed up subject, and ordered stores. Signed-off-by: Jens Axboe --- block/bio.c | 1 + block/bounce.c | 1 + 2 files changed, 2 insertions(+) diff --git a/block/bio.c b/block/bio.c index a50d59236b19..4f4d9884443b 100644 --- a/block/bio.c +++ b/block/bio.c @@ -605,6 +605,7 @@ void __bio_clone_fast(struct bio *bio, struct bio *bio_src) if (bio_flagged(bio_src, BIO_THROTTLED)) bio_set_flag(bio, BIO_THROTTLED); bio->bi_opf = bio_src->bi_opf; + bio->bi_ioprio = bio_src->bi_ioprio; bio->bi_write_hint = bio_src->bi_write_hint; bio->bi_iter = bio_src->bi_iter; bio->bi_io_vec = bio_src->bi_io_vec; diff --git a/block/bounce.c b/block/bounce.c index 36869afc258c..559c55bda040 100644 --- a/block/bounce.c +++ b/block/bounce.c @@ -248,6 +248,7 @@ static struct bio *bounce_clone_bio(struct bio *bio_src, gfp_t gfp_mask, return NULL; bio->bi_disk = bio_src->bi_disk; bio->bi_opf = bio_src->bi_opf; + bio->bi_ioprio = bio_src->bi_ioprio; bio->bi_write_hint = bio_src->bi_write_hint; bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector; bio->bi_iter.bi_size = bio_src->bi_iter.bi_size; From 82fba2df7f7c019627f24c5036dc99f41731d770 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 11 Nov 2018 00:06:12 +0200 Subject: [PATCH 464/726] MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver Re-enable OCTEON USB driver which is needed on older hardware (e.g. EdgeRouter Lite) for mass storage etc. This got accidentally deleted when config options were changed for OCTEON2/3 USB. Signed-off-by: Aaro Koskinen Signed-off-by: Paul Burton Fixes: f922bc0ad08b ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers") Patchwork: https://patchwork.linux-mips.org/patch/21077/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.14+ --- arch/mips/configs/cavium_octeon_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig index 490b12af103c..c52d0efacd14 100644 --- a/arch/mips/configs/cavium_octeon_defconfig +++ b/arch/mips/configs/cavium_octeon_defconfig @@ -140,6 +140,7 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_STAGING=y CONFIG_OCTEON_ETHERNET=y +CONFIG_OCTEON_USB=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_RAS=y CONFIG_EXT4_FS=y From 25517ed4e99b3be4244dfd61d1e5c753b09faf2c Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Sat, 10 Nov 2018 11:50:14 +0800 Subject: [PATCH 465/726] MIPS: Let early memblock_alloc*() allocate memories bottom-up After switched to NO_BOOTMEM, there are several boot failures. Some of them have been fixed and some of them haven't. I find that many of them are because of memory allocations are top-down, while the old behavior is bottom-up. This patch let early memblock_alloc*() allocate memories bottom-up to avoid some potential problems. Signed-off-by: Huacai Chen Signed-off-by: Paul Burton Fixes: bcec54bf3118 ("mips: switch to NO_BOOTMEM") Patchwork: https://patchwork.linux-mips.org/patch/21069/ References: https://patchwork.linux-mips.org/patch/21031/ Cc: Ralf Baechle Cc: James Hogan Cc: Steven J . Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu --- arch/mips/kernel/setup.c | 1 + arch/mips/kernel/traps.c | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index ea09ed6a80a9..8c6c48ed786a 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -794,6 +794,7 @@ static void __init arch_mem_init(char **cmdline_p) /* call board setup routine */ plat_mem_setup(); + memblock_set_bottom_up(true); /* * Make sure all kernel memory is in the maps. The "UP" and diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 0f852e1b5891..15e103c6d799 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2260,10 +2260,8 @@ void __init trap_init(void) unsigned long size = 0x200 + VECTORSPACING*64; phys_addr_t ebase_pa; - memblock_set_bottom_up(true); ebase = (unsigned long) memblock_alloc_from(size, 1 << fls(size), 0); - memblock_set_bottom_up(false); /* * Try to ensure ebase resides in KSeg0 if possible. @@ -2307,6 +2305,7 @@ void __init trap_init(void) if (board_ebase_setup) board_ebase_setup(); per_cpu_trap_init(true); + memblock_set_bottom_up(false); /* * Copy the generic exception handlers to their final destination. From 410b5c7b48368317af95f0113692561d01d8144e Mon Sep 17 00:00:00 2001 From: Diego Viola Date: Mon, 12 Nov 2018 17:22:52 -0200 Subject: [PATCH 466/726] libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q). Set model_rev to NULL and blacklist the device. Cc: stable@vger.kernel.org Signed-off-by: Diego Viola Reviewed-by: Hans de Goede Signed-off-by: Jens Axboe --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6e594644cb1d..a7f5202a4815 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4553,7 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, }, - { "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, }, + { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM, }, /* devices that don't properly handle queued TRIM commands */ { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | From 5581c670fb7ec267fc79215c6d5176b07e5f6dad Mon Sep 17 00:00:00 2001 From: shaoyunl Date: Mon, 12 Nov 2018 11:19:24 -0500 Subject: [PATCH 467/726] drm/amdgpu: set system aperture to cover whole FB region MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: shaoyunl Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c | 6 +++--- drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c index ceb7847b504f..bfa317ad20a9 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c @@ -72,7 +72,7 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev) /* Program the system aperture low logical page number. */ WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR, - min(adev->gmc.vram_start, adev->gmc.agp_start) >> 18); + min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18); if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8) /* @@ -82,11 +82,11 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev) * to get rid of the VM fault and hardware hang. */ WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, - max((adev->gmc.vram_end >> 18) + 0x1, + max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18)); else WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, - max(adev->gmc.vram_end, adev->gmc.agp_end) >> 18); + max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18); /* Set default page address. */ value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c index fd23ba1226a5..a0db67adc34c 100644 --- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c @@ -90,7 +90,7 @@ static void mmhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev) /* Program the system aperture low logical page number. */ WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR, - min(adev->gmc.vram_start, adev->gmc.agp_start) >> 18); + min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18); if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8) /* @@ -100,11 +100,11 @@ static void mmhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev) * to get rid of the VM fault and hardware hang. */ WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, - max((adev->gmc.vram_end >> 18) + 0x1, + max((adev->gmc.fb_end >> 18) + 0x1, adev->gmc.agp_end >> 18)); else WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, - max(adev->gmc.vram_end, adev->gmc.agp_end) >> 18); + max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18); /* Set default page address. */ value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start + From 21a446cf186570168b7281b154b1993968598aca Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Nov 2018 11:10:50 -0500 Subject: [PATCH 468/726] NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING If we exit the NFSv4 state manager due to a umount, then we can end up leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes the nfs4_client to be rereferenced before it is destroyed, then we end up never being able to recover state. Fixes: 47c2199b6eb5 ("NFSv4.1: Ensure state manager thread dies on last ...") Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org # v4.15+ --- fs/nfs/nfs4state.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 62ae0fd345ad..98d1b6a6646a 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -2601,11 +2601,12 @@ static void nfs4_state_manager(struct nfs_client *clp) nfs4_clear_state_manager_bit(clp); /* Did we race with an attempt to give us more work? */ if (clp->cl_state == 0) - break; + return; if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0) - break; + return; } while (refcount_read(&clp->cl_count) > 1); - return; + goto out_drain; + out_error: if (strlen(section)) section_sep = ": "; @@ -2613,6 +2614,7 @@ out_error: " with error %d\n", section_sep, section, clp->cl_hostname, -status); ssleep(1); +out_drain: nfs4_end_drain_session(clp); nfs4_clear_state_manager_bit(clp); } From a1aa09be21fa344d1f5585aab8164bfae55f57e3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Nov 2018 12:17:01 -0500 Subject: [PATCH 469/726] NFSv4: Ensure that the state manager exits the loop on SIGKILL Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 98d1b6a6646a..ffea57885394 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -2604,7 +2604,7 @@ static void nfs4_state_manager(struct nfs_client *clp) return; if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0) return; - } while (refcount_read(&clp->cl_count) > 1); + } while (refcount_read(&clp->cl_count) > 1 && !signalled()); goto out_drain; out_error: From a652a4bc21695a57c3b8d13d222a6f8b41f100aa Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 12 Nov 2018 15:30:52 -0500 Subject: [PATCH 470/726] SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache Commit 07d02a67b7fa causes a use-after free in the RPCSEC_GSS credential destroy code, because the call to get_rpccred() in gss_destroying_context() will now always fail to increment the refcount. While we could just replace the get_rpccred() with a refcount_set(), that would have the unfortunate consequence of resurrecting a credential in the credential cache for which we are in the process of destroying the RPCSEC_GSS context. Rather than do this, we choose to make a copy that is never added to the cache and use that to destroy the context. Fixes: 07d02a67b7fa ("SUNRPC: Simplify lookup code") Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 61 +++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 19 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 30f970cdc7f6..5d3f252659f1 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1239,36 +1239,59 @@ gss_create(const struct rpc_auth_create_args *args, struct rpc_clnt *clnt) return &gss_auth->rpc_auth; } +static struct gss_cred * +gss_dup_cred(struct gss_auth *gss_auth, struct gss_cred *gss_cred) +{ + struct gss_cred *new; + + /* Make a copy of the cred so that we can reference count it */ + new = kzalloc(sizeof(*gss_cred), GFP_NOIO); + if (new) { + struct auth_cred acred = { + .uid = gss_cred->gc_base.cr_uid, + }; + struct gss_cl_ctx *ctx = + rcu_dereference_protected(gss_cred->gc_ctx, 1); + + rpcauth_init_cred(&new->gc_base, &acred, + &gss_auth->rpc_auth, + &gss_nullops); + new->gc_base.cr_flags = 1UL << RPCAUTH_CRED_UPTODATE; + new->gc_service = gss_cred->gc_service; + new->gc_principal = gss_cred->gc_principal; + kref_get(&gss_auth->kref); + rcu_assign_pointer(new->gc_ctx, ctx); + gss_get_ctx(ctx); + } + return new; +} + /* - * gss_destroying_context will cause the RPCSEC_GSS to send a NULL RPC call + * gss_send_destroy_context will cause the RPCSEC_GSS to send a NULL RPC call * to the server with the GSS control procedure field set to * RPC_GSS_PROC_DESTROY. This should normally cause the server to release * all RPCSEC_GSS state associated with that context. */ -static int -gss_destroying_context(struct rpc_cred *cred) +static void +gss_send_destroy_context(struct rpc_cred *cred) { struct gss_cred *gss_cred = container_of(cred, struct gss_cred, gc_base); struct gss_auth *gss_auth = container_of(cred->cr_auth, struct gss_auth, rpc_auth); struct gss_cl_ctx *ctx = rcu_dereference_protected(gss_cred->gc_ctx, 1); + struct gss_cred *new; struct rpc_task *task; - if (test_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags) == 0) - return 0; + new = gss_dup_cred(gss_auth, gss_cred); + if (new) { + ctx->gc_proc = RPC_GSS_PROC_DESTROY; - ctx->gc_proc = RPC_GSS_PROC_DESTROY; - cred->cr_ops = &gss_nullops; + task = rpc_call_null(gss_auth->client, &new->gc_base, + RPC_TASK_ASYNC|RPC_TASK_SOFT); + if (!IS_ERR(task)) + rpc_put_task(task); - /* Take a reference to ensure the cred will be destroyed either - * by the RPC call or by the put_rpccred() below */ - get_rpccred(cred); - - task = rpc_call_null(gss_auth->client, cred, RPC_TASK_ASYNC|RPC_TASK_SOFT); - if (!IS_ERR(task)) - rpc_put_task(task); - - put_rpccred(cred); - return 1; + put_rpccred(&new->gc_base); + } } /* gss_destroy_cred (and gss_free_ctx) are used to clean up after failure @@ -1330,8 +1353,8 @@ static void gss_destroy_cred(struct rpc_cred *cred) { - if (gss_destroying_context(cred)) - return; + if (test_and_clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags) != 0) + gss_send_destroy_context(cred); gss_destroy_nullcred(cred); } From e3d5e573a54dabdc0f9f3cb039d799323372b251 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 12 Nov 2018 16:06:51 -0500 Subject: [PATCH 471/726] SUNRPC: Fix a bogus get/put in generic_key_to_expire() Signed-off-by: Trond Myklebust --- net/sunrpc/auth_generic.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c index d8831b988b1e..ab4a3be1542a 100644 --- a/net/sunrpc/auth_generic.c +++ b/net/sunrpc/auth_generic.c @@ -281,13 +281,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred) { struct auth_cred *acred = &container_of(cred, struct generic_cred, gc_base)->acred; - bool ret; - - get_rpccred(cred); - ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags); - put_rpccred(cred); - - return ret; + return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags); } static const struct rpc_credops generic_credops = { From 4ab49461d9d9b8274cc72d8656fe685ed394b8f7 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Thu, 1 Nov 2018 10:40:33 +0530 Subject: [PATCH 472/726] RISC-V: defconfig: Enable printk timestamps The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel Acked-by: Olof Johansson Signed-off-by: Palmer Dabbelt --- arch/riscv/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index 07fa9ea75fea..ef4f15df9adf 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -76,4 +76,5 @@ CONFIG_NFS_V4_1=y CONFIG_NFS_V4_2=y CONFIG_ROOT_NFS=y CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_PRINTK_TIME=y # CONFIG_RCU_TRACE is not set From 10febb3ecace4b557eaa0d52c9d2c3531c1a715a Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 5 Nov 2018 15:40:04 +0100 Subject: [PATCH 473/726] riscv: fix spacing in struct pt_regs Replace 8 spaces with tab to match styling. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/ptrace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/include/asm/ptrace.h b/arch/riscv/include/asm/ptrace.h index 2c5df945d43c..bbe1862e8f80 100644 --- a/arch/riscv/include/asm/ptrace.h +++ b/arch/riscv/include/asm/ptrace.h @@ -56,8 +56,8 @@ struct pt_regs { unsigned long sstatus; unsigned long sbadaddr; unsigned long scause; - /* a0 value before the syscall */ - unsigned long orig_a0; + /* a0 value before the syscall */ + unsigned long orig_a0; }; #ifdef CONFIG_64BIT From f157d411a9eb170d2ee6b766da7a381962017cc9 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 5 Nov 2018 15:35:37 +0100 Subject: [PATCH 474/726] riscv: add missing vdso_install target Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index d10146197533..4af153a182b0 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -77,4 +77,8 @@ core-y += arch/riscv/kernel/ arch/riscv/mm/ libs-y += arch/riscv/lib/ +PHONY += vdso_install +vdso_install: + $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ + all: vmlinux From 85d90b91807bb0c4a0fcff6a144e73f11cda782a Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 30 Oct 2018 23:47:07 -0700 Subject: [PATCH 475/726] RISC-V: lib: Fix build error for 64-bit Fixes the following build error from tinyconfig: riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8': fair.c:(.text+0x70): undefined reference to `__lshrti3' riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ': clocksource.c:(.text+0x334): undefined reference to `__lshrti3' Fixes: 7f47c73b355f ("RISC-V: Build tishift only on 64-bit") Signed-off-by: Olof Johansson Signed-off-by: Palmer Dabbelt --- arch/riscv/lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 5739bd05d289..4e2e600f7d53 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -3,6 +3,6 @@ lib-y += memcpy.o lib-y += memset.o lib-y += uaccess.o -lib-(CONFIG_64BIT) += tishift.o +lib-$(CONFIG_64BIT) += tishift.o lib-$(CONFIG_32BIT) += udivdi3.o From ef3a61406618291c46da168ff91acaa28d85944c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 30 Oct 2018 23:47:09 -0700 Subject: [PATCH 476/726] RISC-V: Silence some module warnings on 32-bit Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by: Olof Johansson Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/module.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c index 3303ed2cd419..7dd308129b40 100644 --- a/arch/riscv/kernel/module.c +++ b/arch/riscv/kernel/module.c @@ -21,7 +21,7 @@ static int apply_r_riscv_32_rela(struct module *me, u32 *location, Elf_Addr v) { if (v != (u32)v) { pr_err("%s: value %016llx out of range for 32-bit field\n", - me->name, v); + me->name, (long long)v); return -EINVAL; } *location = v; @@ -102,7 +102,7 @@ static int apply_r_riscv_pcrel_hi20_rela(struct module *me, u32 *location, if (offset != (s32)offset) { pr_err( "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n", - me->name, v, location); + me->name, (long long)v, location); return -EINVAL; } @@ -144,7 +144,7 @@ static int apply_r_riscv_hi20_rela(struct module *me, u32 *location, if (IS_ENABLED(CMODEL_MEDLOW)) { pr_err( "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n", - me->name, v, location); + me->name, (long long)v, location); return -EINVAL; } @@ -188,7 +188,7 @@ static int apply_r_riscv_got_hi20_rela(struct module *me, u32 *location, } else { pr_err( "%s: can not generate the GOT entry for symbol = %016llx from PC = %p\n", - me->name, v, location); + me->name, (long long)v, location); return -EINVAL; } @@ -212,7 +212,7 @@ static int apply_r_riscv_call_plt_rela(struct module *me, u32 *location, } else { pr_err( "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n", - me->name, v, location); + me->name, (long long)v, location); return -EINVAL; } } @@ -234,7 +234,7 @@ static int apply_r_riscv_call_rela(struct module *me, u32 *location, if (offset != fill_v) { pr_err( "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n", - me->name, v, location); + me->name, (long long)v, location); return -EINVAL; } From ba038546ff9e15d54d1134b5c5d2355648c00dec Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 7 Nov 2018 10:04:22 +0530 Subject: [PATCH 477/726] opp: ti-opp-supply: Dynamically update u_volt_min The voltage range (min, max) provided in the device tree is from the data manual and is pretty big, catering to a wide range of devices. On a i2c read/write failure the regulator_set_voltage_triplet function falls back to set voltage between min and max. The min value from Device Tree can be lesser than the optimal value and in that case that can lead to a hang or crash. Hence set the u_volt_min dynamically to the optimal voltage value. Cc: 4.16+ # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy Acked-by: Dave Gerlach Signed-off-by: Viresh Kumar --- drivers/opp/ti-opp-supply.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c index 9e5a9a3112c9..29e08a49d13b 100644 --- a/drivers/opp/ti-opp-supply.c +++ b/drivers/opp/ti-opp-supply.c @@ -290,6 +290,9 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, new_supply_vbb->u_volt); + if (new_supply_vdd->u_volt_min < vdd_uv) + new_supply_vdd->u_volt_min = vdd_uv; + /* Scaling up? Scale voltage before frequency */ if (freq > old_freq) { ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, From 622fecbccfe86a8052dea6b512d3821dcce29994 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 7 Nov 2018 10:04:23 +0530 Subject: [PATCH 478/726] opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call _get_optimal_vdd_voltage call provides new_supply_vbb->u_volt as the reference voltage while it should be really new_supply_vdd->u_volt. Cc: 4.16+ # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy Acked-by: Dave Gerlach Signed-off-by: Viresh Kumar --- drivers/opp/ti-opp-supply.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c index 29e08a49d13b..3f4fb4dbbe33 100644 --- a/drivers/opp/ti-opp-supply.c +++ b/drivers/opp/ti-opp-supply.c @@ -288,7 +288,7 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) int ret; vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, - new_supply_vbb->u_volt); + new_supply_vdd->u_volt); if (new_supply_vdd->u_volt_min < vdd_uv) new_supply_vdd->u_volt_min = vdd_uv; From adf59dd2408c4536d490bee649784f0465562444 Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Mon, 12 Nov 2018 19:41:09 +0100 Subject: [PATCH 479/726] drm/meson: venc: dmt mode must use encp The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/1542048069-22603-1-git-send-email-jramirez@baylibre.com --- drivers/gpu/drm/meson/meson_venc.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c index 514245e69b38..acbbad3e322c 100644 --- a/drivers/gpu/drm/meson/meson_venc.c +++ b/drivers/gpu/drm/meson/meson_venc.c @@ -854,6 +854,13 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic, unsigned int sof_lines; unsigned int vsync_lines; + /* Use VENCI for 480i and 576i and double HDMI pixels */ + if (mode->flags & DRM_MODE_FLAG_DBLCLK) { + hdmi_repeat = true; + use_enci = true; + venc_hdmi_latency = 1; + } + if (meson_venc_hdmi_supported_vic(vic)) { vmode = meson_venc_hdmi_get_vic_vmode(vic); if (!vmode) { @@ -865,13 +872,7 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic, } else { meson_venc_hdmi_get_dmt_vmode(mode, &vmode_dmt); vmode = &vmode_dmt; - } - - /* Use VENCI for 480i and 576i and double HDMI pixels */ - if (mode->flags & DRM_MODE_FLAG_DBLCLK) { - hdmi_repeat = true; - use_enci = true; - venc_hdmi_latency = 1; + use_enci = false; } /* Repeat VENC pixels for 480/576i/p, 720p50/60 and 1080p50/60 */ From 0d76bcc960e6057750fcf556b65da13f8bbdfd2b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 13 Nov 2018 08:38:17 -0600 Subject: [PATCH 480/726] Revert "ACPI/PCI: Pay attention to device-specific _PXM node values" This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com [2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas --- drivers/pci/pci-acpi.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 2a4aa6468579..921db6f80340 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -793,15 +793,10 @@ static void pci_acpi_setup(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); struct acpi_device *adev = ACPI_COMPANION(dev); - int node; if (!adev) return; - node = acpi_get_node(adev->handle); - if (node != NUMA_NO_NODE) - set_dev_node(dev, node); - pci_acpi_optimize_delay(pci_dev, adev->handle); pci_acpi_add_pm_notifier(adev, pci_dev); From c837243ff4017f493c7d6f4ab57278d812a86859 Mon Sep 17 00:00:00 2001 From: Philip Yang Date: Mon, 12 Nov 2018 14:00:45 -0500 Subject: [PATCH 481/726] drm/amdgpu: fix bug with IH ring setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König Signed-off-by: Philip Yang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vega10_ih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vega10_ih.c b/drivers/gpu/drm/amd/amdgpu/vega10_ih.c index a99f71797aa3..a0fda6f9252a 100644 --- a/drivers/gpu/drm/amd/amdgpu/vega10_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/vega10_ih.c @@ -129,7 +129,7 @@ static int vega10_ih_irq_init(struct amdgpu_device *adev) else wptr_off = adev->wb.gpu_addr + (adev->irq.ih.wptr_offs * 4); WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_LO, lower_32_bits(wptr_off)); - WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_HI, upper_32_bits(wptr_off) & 0xFF); + WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_HI, upper_32_bits(wptr_off) & 0xFFFF); /* set rptr, wptr to 0 */ WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR, 0); From 4d454e9ffdb1ef5a51ebc147b5389c96048db683 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 13 Nov 2018 11:15:56 +0800 Subject: [PATCH 482/726] drm/amd/pp: Fix truncated clock value when set watermark the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher Reported-by: Hersen Wu Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../gpu/drm/amd/powerplay/hwmgr/smu_helper.c | 32 +++++++++---------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c index 99a33c33a32c..101c09b212ad 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c @@ -713,20 +713,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table, for (i = 0; i < wm_with_clock_ranges->num_wm_dmif_sets; i++) { table->WatermarkRow[1][i].MinClock = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz / + 1000)); table->WatermarkRow[1][i].MaxClock = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz / + 1000)); table->WatermarkRow[1][i].MinUclk = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz / + 1000)); table->WatermarkRow[1][i].MaxUclk = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz / + 1000)); table->WatermarkRow[1][i].WmSetting = (uint8_t) wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_set_id; } @@ -734,20 +734,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table, for (i = 0; i < wm_with_clock_ranges->num_wm_mcif_sets; i++) { table->WatermarkRow[0][i].MinClock = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz / + 1000)); table->WatermarkRow[0][i].MaxClock = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz / + 1000)); table->WatermarkRow[0][i].MinUclk = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz / + 1000)); table->WatermarkRow[0][i].MaxUclk = cpu_to_le16((uint16_t) - (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz) / - 1000); + (wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz / + 1000)); table->WatermarkRow[0][i].WmSetting = (uint8_t) wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_set_id; } From c1a17777eb45d9f3821f35e9869c0a08cd2e664e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 12 Nov 2018 18:08:31 +0100 Subject: [PATCH 483/726] drm/amdgpu: fix huge page handling on Vega10 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König Acked-by: Alex Deucher Tested-by: Samuel Pitoiset Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 352b30409060..dad0e2342df9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1632,13 +1632,6 @@ static int amdgpu_vm_update_ptes(struct amdgpu_pte_update_params *params, continue; } - /* First check if the entry is already handled */ - if (cursor.pfn < frag_start) { - cursor.entry->huge = true; - amdgpu_vm_pt_next(adev, &cursor); - continue; - } - /* If it isn't already handled it can't be a huge page */ if (cursor.entry->huge) { /* Add the entry to the relocated list to update it. */ @@ -1701,8 +1694,17 @@ static int amdgpu_vm_update_ptes(struct amdgpu_pte_update_params *params, } } while (frag_start < entry_end); - if (frag >= shift) + if (amdgpu_vm_pt_descendant(adev, &cursor)) { + /* Mark all child entries as huge */ + while (cursor.pfn < frag_start) { + cursor.entry->huge = true; + amdgpu_vm_pt_next(adev, &cursor); + } + + } else if (frag >= shift) { + /* or just move on to the next on the same level. */ amdgpu_vm_pt_next(adev, &cursor); + } } return 0; From c138325fb8713472d5a0c3c7258b9131bab40725 Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Tue, 13 Nov 2018 16:16:08 +0100 Subject: [PATCH 484/726] selinux: check length properly in SCTP bind hook selinux_sctp_bind_connect() must verify if the address buffer has sufficient length before accessing the 'sa_family' field. See __sctp_connect() for a similar check. The length of the whole address ('len') is already checked in the callees. Reported-by: Qian Cai Fixes: d452930fd3b9 ("selinux: Add SCTP support") Cc: # 4.17+ Cc: Richard Haines Signed-off-by: Ondrej Mosnacek Tested-by: Qian Cai Signed-off-by: Paul Moore --- security/selinux/hooks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 18b98b5e1e3c..fe251c6f09f1 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -5318,6 +5318,9 @@ static int selinux_sctp_bind_connect(struct sock *sk, int optname, addr_buf = address; while (walk_size < addrlen) { + if (walk_size + sizeof(sa_family_t) > addrlen) + return -EINVAL; + addr = addr_buf; switch (addr->sa_family) { case AF_UNSPEC: From 9aaa4e8ba12972d674caeefbc5f88d83235dd697 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Mon, 12 Nov 2018 12:50:20 +0200 Subject: [PATCH 485/726] qed: Fix PTT leak in qed_drain() Release PTT before entering error flow. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 35fd0db6a677..fff7f04d4525 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1782,9 +1782,9 @@ static int qed_drain(struct qed_dev *cdev) return -EBUSY; } rc = qed_mcp_drain(hwfn, ptt); + qed_ptt_release(hwfn, ptt); if (rc) return rc; - qed_ptt_release(hwfn, ptt); } return 0; From e90202ed1cf9672c48a363c84a929932ebfe6fc0 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Mon, 12 Nov 2018 12:50:21 +0200 Subject: [PATCH 486/726] qed: Fix overriding offload_tc by protocols without APP TLV The TC received from APP TLV is stored in offload_tc, and should not be set by protocols which did not receive an APP TLV. Fixed the condition when overriding the offload_tc. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 8e8fa823d611..69966dfc6e3d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -191,7 +191,7 @@ qed_dcbx_dp_protocol(struct qed_hwfn *p_hwfn, struct qed_dcbx_results *p_data) static void qed_dcbx_set_params(struct qed_dcbx_results *p_data, struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, - bool enable, u8 prio, u8 tc, + bool app_tlv, bool enable, u8 prio, u8 tc, enum dcbx_protocol_type type, enum qed_pci_personality personality) { @@ -210,7 +210,7 @@ qed_dcbx_set_params(struct qed_dcbx_results *p_data, p_data->arr[type].dont_add_vlan0 = true; /* QM reconf data */ - if (p_hwfn->hw_info.personality == personality) + if (app_tlv && p_hwfn->hw_info.personality == personality) qed_hw_info_set_offload_tc(&p_hwfn->hw_info, tc); /* Configure dcbx vlan priority in doorbell block for roce EDPM */ @@ -225,7 +225,7 @@ qed_dcbx_set_params(struct qed_dcbx_results *p_data, static void qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, - bool enable, u8 prio, u8 tc, + bool app_tlv, bool enable, u8 prio, u8 tc, enum dcbx_protocol_type type) { enum qed_pci_personality personality; @@ -240,7 +240,7 @@ qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, personality = qed_dcbx_app_update[i].personality; - qed_dcbx_set_params(p_data, p_hwfn, p_ptt, enable, + qed_dcbx_set_params(p_data, p_hwfn, p_ptt, app_tlv, enable, prio, tc, type, personality); } } @@ -319,8 +319,8 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, enable = true; } - qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, enable, - priority, tc, type); + qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, true, + enable, priority, tc, type); } } @@ -341,7 +341,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, continue; enable = (type == DCBX_PROTOCOL_ETH) ? false : !!dcbx_version; - qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, enable, + qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, false, enable, priority, tc, type); } From 291d57f67d2449737d1e370ab5b9a583818eaa0c Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Mon, 12 Nov 2018 12:50:22 +0200 Subject: [PATCH 487/726] qed: Fix rdma_info structure allocation Certain flows need to access the rdma-info structure, for example dcbx update flows. In some cases there can be a race between the allocation or deallocation of the structure which was done in roce start / roce stop and an asynchrounous dcbx event that tries to access the structure. For this reason, we move the allocation of the rdma_info structure to be similar to the iscsi/fcoe info structures which are allocated during device setup. We add a new field of "active" to the struct to define whether roce has already been started or not, and this is checked instead of whether the pointer to the info structure. Fixes: 51ff17251c9c ("qed: Add support for RoCE hw init") Signed-off-by: Michal Kalderon Signed-off-by: Denis Bolotin Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 15 +++++-- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 50 +++++++++++++--------- drivers/net/ethernet/qlogic/qed/qed_rdma.h | 5 +++ 3 files changed, 45 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 7ceb2b97538d..cff141077558 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -185,6 +185,10 @@ void qed_resc_free(struct qed_dev *cdev) qed_iscsi_free(p_hwfn); qed_ooo_free(p_hwfn); } + + if (QED_IS_RDMA_PERSONALITY(p_hwfn)) + qed_rdma_info_free(p_hwfn); + qed_iov_free(p_hwfn); qed_l2_free(p_hwfn); qed_dmae_info_free(p_hwfn); @@ -1081,6 +1085,12 @@ int qed_resc_alloc(struct qed_dev *cdev) goto alloc_err; } + if (QED_IS_RDMA_PERSONALITY(p_hwfn)) { + rc = qed_rdma_info_alloc(p_hwfn); + if (rc) + goto alloc_err; + } + /* DMA info initialization */ rc = qed_dmae_info_alloc(p_hwfn); if (rc) @@ -2102,11 +2112,8 @@ int qed_hw_start_fastpath(struct qed_hwfn *p_hwfn) if (!p_ptt) return -EAGAIN; - /* If roce info is allocated it means roce is initialized and should - * be enabled in searcher. - */ if (p_hwfn->p_rdma_info && - p_hwfn->b_rdma_enabled_in_prs) + p_hwfn->p_rdma_info->active && p_hwfn->b_rdma_enabled_in_prs) qed_wr(p_hwfn, p_ptt, p_hwfn->rdma_prs_search_reg, 0x1); /* Re-open incoming traffic */ diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index 62113438c880..7873d6dfd91f 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -140,22 +140,34 @@ static u32 qed_rdma_get_sb_id(void *p_hwfn, u32 rel_sb_id) return FEAT_NUM((struct qed_hwfn *)p_hwfn, QED_PF_L2_QUE) + rel_sb_id; } -static int qed_rdma_alloc(struct qed_hwfn *p_hwfn, - struct qed_ptt *p_ptt, - struct qed_rdma_start_in_params *params) +int qed_rdma_info_alloc(struct qed_hwfn *p_hwfn) { struct qed_rdma_info *p_rdma_info; + + p_rdma_info = kzalloc(sizeof(*p_rdma_info), GFP_KERNEL); + if (!p_rdma_info) + return -ENOMEM; + + spin_lock_init(&p_rdma_info->lock); + + p_hwfn->p_rdma_info = p_rdma_info; + return 0; +} + +void qed_rdma_info_free(struct qed_hwfn *p_hwfn) +{ + kfree(p_hwfn->p_rdma_info); + p_hwfn->p_rdma_info = NULL; +} + +static int qed_rdma_alloc(struct qed_hwfn *p_hwfn) +{ + struct qed_rdma_info *p_rdma_info = p_hwfn->p_rdma_info; u32 num_cons, num_tasks; int rc = -ENOMEM; DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "Allocating RDMA\n"); - /* Allocate a struct with current pf rdma info */ - p_rdma_info = kzalloc(sizeof(*p_rdma_info), GFP_KERNEL); - if (!p_rdma_info) - return rc; - - p_hwfn->p_rdma_info = p_rdma_info; if (QED_IS_IWARP_PERSONALITY(p_hwfn)) p_rdma_info->proto = PROTOCOLID_IWARP; else @@ -183,7 +195,7 @@ static int qed_rdma_alloc(struct qed_hwfn *p_hwfn, /* Allocate a struct with device params and fill it */ p_rdma_info->dev = kzalloc(sizeof(*p_rdma_info->dev), GFP_KERNEL); if (!p_rdma_info->dev) - goto free_rdma_info; + return rc; /* Allocate a struct with port params and fill it */ p_rdma_info->port = kzalloc(sizeof(*p_rdma_info->port), GFP_KERNEL); @@ -298,8 +310,6 @@ free_rdma_port: kfree(p_rdma_info->port); free_rdma_dev: kfree(p_rdma_info->dev); -free_rdma_info: - kfree(p_rdma_info); return rc; } @@ -370,8 +380,6 @@ static void qed_rdma_resc_free(struct qed_hwfn *p_hwfn) kfree(p_rdma_info->port); kfree(p_rdma_info->dev); - - kfree(p_rdma_info); } static void qed_rdma_free_tid(void *rdma_cxt, u32 itid) @@ -679,8 +687,6 @@ static int qed_rdma_setup(struct qed_hwfn *p_hwfn, DP_VERBOSE(p_hwfn, QED_MSG_RDMA, "RDMA setup\n"); - spin_lock_init(&p_hwfn->p_rdma_info->lock); - qed_rdma_init_devinfo(p_hwfn, params); qed_rdma_init_port(p_hwfn); qed_rdma_init_events(p_hwfn, params); @@ -727,7 +733,7 @@ static int qed_rdma_stop(void *rdma_cxt) /* Disable RoCE search */ qed_wr(p_hwfn, p_ptt, p_hwfn->rdma_prs_search_reg, 0); p_hwfn->b_rdma_enabled_in_prs = false; - + p_hwfn->p_rdma_info->active = 0; qed_wr(p_hwfn, p_ptt, PRS_REG_ROCE_DEST_QP_MAX_PF, 0); ll2_ethertype_en = qed_rd(p_hwfn, p_ptt, PRS_REG_LIGHT_L2_ETHERTYPE_EN); @@ -1236,7 +1242,8 @@ qed_rdma_create_qp(void *rdma_cxt, u8 max_stats_queues; int rc; - if (!rdma_cxt || !in_params || !out_params || !p_hwfn->p_rdma_info) { + if (!rdma_cxt || !in_params || !out_params || + !p_hwfn->p_rdma_info->active) { DP_ERR(p_hwfn->cdev, "qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n", rdma_cxt, in_params, out_params); @@ -1802,8 +1809,8 @@ bool qed_rdma_allocated_qps(struct qed_hwfn *p_hwfn) { bool result; - /* if rdma info has not been allocated, naturally there are no qps */ - if (!p_hwfn->p_rdma_info) + /* if rdma wasn't activated yet, naturally there are no qps */ + if (!p_hwfn->p_rdma_info->active) return false; spin_lock_bh(&p_hwfn->p_rdma_info->lock); @@ -1849,7 +1856,7 @@ static int qed_rdma_start(void *rdma_cxt, if (!p_ptt) goto err; - rc = qed_rdma_alloc(p_hwfn, p_ptt, params); + rc = qed_rdma_alloc(p_hwfn); if (rc) goto err1; @@ -1858,6 +1865,7 @@ static int qed_rdma_start(void *rdma_cxt, goto err2; qed_ptt_release(p_hwfn, p_ptt); + p_hwfn->p_rdma_info->active = 1; return rc; diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.h b/drivers/net/ethernet/qlogic/qed/qed_rdma.h index 6f722ee8ee94..50d609c0e108 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.h +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.h @@ -102,6 +102,7 @@ struct qed_rdma_info { u16 max_queue_zones; enum protocol_type proto; struct qed_iwarp_info iwarp; + u8 active:1; }; struct qed_rdma_qp { @@ -176,10 +177,14 @@ struct qed_rdma_qp { #if IS_ENABLED(CONFIG_QED_RDMA) void qed_rdma_dpm_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); void qed_rdma_dpm_conf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); +int qed_rdma_info_alloc(struct qed_hwfn *p_hwfn); +void qed_rdma_info_free(struct qed_hwfn *p_hwfn); #else static inline void qed_rdma_dpm_conf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) {} static inline void qed_rdma_dpm_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) {} +static inline int qed_rdma_info_alloc(struct qed_hwfn *p_hwfn) {return -EINVAL} +static inline void qed_rdma_info_free(struct qed_hwfn *p_hwfn) {} #endif int From ed4eac20dcffdad47709422e0cb925981b056668 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Mon, 12 Nov 2018 12:50:23 +0200 Subject: [PATCH 488/726] qed: Fix reading wrong value in loop condition The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_int.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 0f0aba793352..b22f464ea3fa 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -992,6 +992,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) */ do { index = p_sb_attn->sb_index; + /* finish reading index before the loop condition */ + dma_rmb(); attn_bits = le32_to_cpu(p_sb_attn->atten_bits); attn_acks = le32_to_cpu(p_sb_attn->atten_ack); } while (index != p_sb_attn->sb_index); From cd5e6d79384eb2dd47de6cb9569150053d4a6803 Mon Sep 17 00:00:00 2001 From: "Tudor.Ambarus@microchip.com" Date: Fri, 9 Nov 2018 16:56:48 +0000 Subject: [PATCH 489/726] mtd: spi-nor: don't drop sfdp data if optional parsers fail JESD216C states that just the Basic Flash Parameter Table is mandatory. Already defined (or future) additional parameter headers and tables are optional. Don't drop already collected sfdp data in case an optional table parser fails. In case of failing, each optional parser is responsible to roll back to the previously known spi_nor data. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Reported-by: Yogesh Gaur Suggested-by: Boris Brezillon Signed-off-by: Tudor Ambarus Tested-by: Yogesh Gaur Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/spi-nor.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 3e54e31889c7..a3ab318406ec 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -3125,7 +3125,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, if (err) goto exit; - /* Parse other parameter headers. */ + /* Parse optional parameter tables. */ for (i = 0; i < header.nph; i++) { param_header = ¶m_headers[i]; @@ -3138,8 +3138,17 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, break; } - if (err) - goto exit; + if (err) { + dev_warn(dev, "Failed to parse optional parameter table: %04x\n", + SFDP_PARAM_HEADER_ID(param_header)); + /* + * Let's not drop all information we extracted so far + * if optional table parsers fail. In case of failing, + * each optional parser is responsible to roll back to + * the previously known spi_nor data. + */ + err = 0; + } } exit: From c797bd81d10e648ec8c84c041191527113e63e85 Mon Sep 17 00:00:00 2001 From: "Tudor.Ambarus@microchip.com" Date: Fri, 9 Nov 2018 16:56:50 +0000 Subject: [PATCH 490/726] mtd: spi-nor: fix iteration over smpt array Iterate over smpt array using its starting address and length instead of the blind iterations that used data found in the array. This prevents possible memory accesses outside of the smpt array boundaries in case software, or manufacturers, misrepresent smpt array fields. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Suggested-by: Boris Brezillon Signed-off-by: Tudor Ambarus Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/spi-nor.c | 40 ++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index a3ab318406ec..fc5cbc42b8c1 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2855,12 +2855,15 @@ static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings) * spi_nor_get_map_in_use() - get the configuration map in use * @nor: pointer to a 'struct spi_nor' * @smpt: pointer to the sector map parameter table + * @smpt_len: sector map parameter table length */ -static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt) +static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, + u8 smpt_len) { const u32 *ret = NULL; - u32 i, addr; + u32 addr; int err; + u8 i; u8 addr_width, read_opcode, read_dummy; u8 read_data_mask, data_byte, map_id; @@ -2869,9 +2872,11 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt) read_opcode = nor->read_opcode; map_id = 0; - i = 0; /* Determine if there are any optional Detection Command Descriptors */ - while (!(smpt[i] & SMPT_DESC_TYPE_MAP)) { + for (i = 0; i < smpt_len; i += 2) { + if (smpt[i] & SMPT_DESC_TYPE_MAP) + break; + read_data_mask = SMPT_CMD_READ_DATA(smpt[i]); nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]); nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]); @@ -2887,18 +2892,33 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt) * Configuration that is currently in use. */ map_id = map_id << 1 | !!(data_byte & read_data_mask); - i = i + 2; } - /* Find the matching configuration map */ - while (SMPT_MAP_ID(smpt[i]) != map_id) { + /* + * If command descriptors are provided, they always precede map + * descriptors in the table. There is no need to start the iteration + * over smpt array all over again. + * + * Find the matching configuration map. + */ + while (i < smpt_len) { + if (SMPT_MAP_ID(smpt[i]) == map_id) { + ret = smpt + i; + break; + } + + /* + * If there are no more configuration map descriptors and no + * configuration ID matched the configuration identifier, the + * sector address map is unknown. + */ if (smpt[i] & SMPT_DESC_END) - goto out; + break; + /* increment the table index to the next map */ i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1; } - ret = smpt + i; /* fall through */ out: nor->addr_width = addr_width; @@ -3020,7 +3040,7 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, for (i = 0; i < smpt_header->length; i++) smpt[i] = le32_to_cpu(smpt[i]); - sector_map = spi_nor_get_map_in_use(nor, smpt); + sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length); if (!sector_map) { ret = -EINVAL; goto out; From b9f07cc8207a2a69496beec3f5a5a8372bacdfdc Mon Sep 17 00:00:00 2001 From: "Tudor.Ambarus@microchip.com" Date: Fri, 9 Nov 2018 16:56:52 +0000 Subject: [PATCH 491/726] mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use() Don't overwrite the errno from spi_nor_read_raw(). Signed-off-by: Tudor Ambarus Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/spi-nor.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index fc5cbc42b8c1..7f03be9b54bc 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2856,11 +2856,13 @@ static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings) * @nor: pointer to a 'struct spi_nor' * @smpt: pointer to the sector map parameter table * @smpt_len: sector map parameter table length + * + * Return: pointer to the map in use, ERR_PTR(-errno) otherwise. */ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, u8 smpt_len) { - const u32 *ret = NULL; + const u32 *ret; u32 addr; int err; u8 i; @@ -2884,8 +2886,10 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, addr = smpt[i + 1]; err = spi_nor_read_raw(nor, addr, 1, &data_byte); - if (err) + if (err) { + ret = ERR_PTR(err); goto out; + } /* * Build an index value that is used to select the Sector Map @@ -2901,6 +2905,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, * * Find the matching configuration map. */ + ret = ERR_PTR(-EINVAL); while (i < smpt_len) { if (SMPT_MAP_ID(smpt[i]) == map_id) { ret = smpt + i; @@ -3041,8 +3046,8 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, smpt[i] = le32_to_cpu(smpt[i]); sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length); - if (!sector_map) { - ret = -EINVAL; + if (IS_ERR(sector_map)) { + ret = PTR_ERR(sector_map); goto out; } From 1d5ceff25aa1edcaf84e7ee26fdcc746cb245af8 Mon Sep 17 00:00:00 2001 From: "Tudor.Ambarus@microchip.com" Date: Fri, 9 Nov 2018 16:56:54 +0000 Subject: [PATCH 492/726] mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw() spi_nor_read_raw() calls nor->read() which might be implemented by the m25p80 driver. m25p80 uses the spi-mem layer which requires DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw(). Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Signed-off-by: Tudor Ambarus Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/spi-nor.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 7f03be9b54bc..eb7bb596416b 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2156,7 +2156,7 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, * @nor: pointer to a 'struct spi_nor' * @addr: offset in the serial flash memory * @len: number of bytes to read - * @buf: buffer where the data is copied into + * @buf: buffer where the data is copied into (dma-safe memory) * * Return: 0 on success, -errno otherwise. */ @@ -2863,11 +2863,17 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, u8 smpt_len) { const u32 *ret; + u8 *buf; u32 addr; int err; u8 i; u8 addr_width, read_opcode, read_dummy; - u8 read_data_mask, data_byte, map_id; + u8 read_data_mask, map_id; + + /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); addr_width = nor->addr_width; read_dummy = nor->read_dummy; @@ -2885,7 +2891,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]); addr = smpt[i + 1]; - err = spi_nor_read_raw(nor, addr, 1, &data_byte); + err = spi_nor_read_raw(nor, addr, 1, buf); if (err) { ret = ERR_PTR(err); goto out; @@ -2895,7 +2901,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, * Build an index value that is used to select the Sector Map * Configuration that is currently in use. */ - map_id = map_id << 1 | !!(data_byte & read_data_mask); + map_id = map_id << 1 | !!(*buf & read_data_mask); } /* @@ -2926,6 +2932,7 @@ static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, /* fall through */ out: + kfree(buf); nor->addr_width = addr_width; nor->read_dummy = read_dummy; nor->read_opcode = read_opcode; From dded2e159208a9edc21dd5c5f583afa28d378d39 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 27 Sep 2018 17:17:49 +0000 Subject: [PATCH 493/726] kdb: use correct pointer when 'btc' calls 'btt' On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: Signed-off-by: Christophe Leroy Reviewed-by: Daniel Thompson Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_bt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c index 6ad4a9fcbd6f..7921ae4fca8d 100644 --- a/kernel/debug/kdb/kdb_bt.c +++ b/kernel/debug/kdb/kdb_bt.c @@ -179,14 +179,14 @@ kdb_bt(int argc, const char **argv) kdb_printf("no process for cpu %ld\n", cpu); return 0; } - sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + sprintf(buf, "btt 0x%px\n", KDB_TSK(cpu)); kdb_parse(buf); return 0; } kdb_printf("btc: cpu status: "); kdb_parse("cpu\n"); for_each_online_cpu(cpu) { - sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + sprintf(buf, "btt 0x%px\n", KDB_TSK(cpu)); kdb_parse(buf); touch_nmi_watchdog(); } From 568fb6f42ac6851320adaea25f8f1b94de14e40a Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 27 Sep 2018 17:17:57 +0000 Subject: [PATCH 494/726] kdb: print real address of pointers instead of hashed addresses Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: Signed-off-by: Christophe Leroy Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_main.c | 14 +++++++------- kernel/debug/kdb/kdb_support.c | 12 ++++++------ 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index bb4fe4e1a601..959242084b40 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1192,7 +1192,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, if (reason == KDB_REASON_DEBUG) { /* special case below */ } else { - kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_printf("\nEntering kdb (current=0x%px, pid %d) ", kdb_current, kdb_current ? kdb_current->pid : 0); #if defined(CONFIG_SMP) kdb_printf("on processor %d ", raw_smp_processor_id()); @@ -1208,7 +1208,7 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, */ switch (db_result) { case KDB_DB_BPT: - kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_printf("\nEntering kdb (0x%px, pid %d) ", kdb_current, kdb_current->pid); #if defined(CONFIG_SMP) kdb_printf("on processor %d ", raw_smp_processor_id()); @@ -2048,7 +2048,7 @@ static int kdb_lsmod(int argc, const char **argv) if (mod->state == MODULE_STATE_UNFORMED) continue; - kdb_printf("%-20s%8u 0x%p ", mod->name, + kdb_printf("%-20s%8u 0x%px ", mod->name, mod->core_layout.size, (void *)mod); #ifdef CONFIG_MODULE_UNLOAD kdb_printf("%4d ", module_refcount(mod)); @@ -2059,7 +2059,7 @@ static int kdb_lsmod(int argc, const char **argv) kdb_printf(" (Loading)"); else kdb_printf(" (Live)"); - kdb_printf(" 0x%p", mod->core_layout.base); + kdb_printf(" 0x%px", mod->core_layout.base); #ifdef CONFIG_MODULE_UNLOAD { @@ -2341,7 +2341,7 @@ void kdb_ps1(const struct task_struct *p) return; cpu = kdb_process_cpu(p); - kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + kdb_printf("0x%px %8d %8d %d %4d %c 0x%px %c%s\n", (void *)p, p->pid, p->parent->pid, kdb_task_has_cpu(p), kdb_process_cpu(p), kdb_task_state_char(p), @@ -2354,7 +2354,7 @@ void kdb_ps1(const struct task_struct *p) } else { if (KDB_TSK(cpu) != p) kdb_printf(" Error: does not match running " - "process table (0x%p)\n", KDB_TSK(cpu)); + "process table (0x%px)\n", KDB_TSK(cpu)); } } } @@ -2687,7 +2687,7 @@ int kdb_register_flags(char *cmd, for_each_kdbcmd(kp, i) { if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { kdb_printf("Duplicate kdb command registered: " - "%s, func %p help %s\n", cmd, func, help); + "%s, func %px help %s\n", cmd, func, help); return 1; } } diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c index 990b3cc526c8..987eb73284d2 100644 --- a/kernel/debug/kdb/kdb_support.c +++ b/kernel/debug/kdb/kdb_support.c @@ -40,7 +40,7 @@ int kdbgetsymval(const char *symname, kdb_symtab_t *symtab) { if (KDB_DEBUG(AR)) - kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname, + kdb_printf("kdbgetsymval: symname=%s, symtab=%px\n", symname, symtab); memset(symtab, 0, sizeof(*symtab)); symtab->sym_start = kallsyms_lookup_name(symname); @@ -88,7 +88,7 @@ int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) char *knt1 = NULL; if (KDB_DEBUG(AR)) - kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab); + kdb_printf("kdbnearsym: addr=0x%lx, symtab=%px\n", addr, symtab); memset(symtab, 0, sizeof(*symtab)); if (addr < 4096) @@ -149,7 +149,7 @@ int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) symtab->mod_name = "kernel"; if (KDB_DEBUG(AR)) kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, " - "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret, + "symtab->mod_name=%px, symtab->sym_name=%px (%s)\n", ret, symtab->sym_start, symtab->mod_name, symtab->sym_name, symtab->sym_name); @@ -887,13 +887,13 @@ void debug_kusage(void) __func__, dah_first); if (dah_first) { h_used = (struct debug_alloc_header *)debug_alloc_pool; - kdb_printf("%s: h_used %p size %d\n", __func__, h_used, + kdb_printf("%s: h_used %px size %d\n", __func__, h_used, h_used->size); } do { h_used = (struct debug_alloc_header *) ((char *)h_free + dah_overhead + h_free->size); - kdb_printf("%s: h_used %p size %d caller %p\n", + kdb_printf("%s: h_used %px size %d caller %px\n", __func__, h_used, h_used->size, h_used->caller); h_free = (struct debug_alloc_header *) (debug_alloc_pool + h_free->next); @@ -902,7 +902,7 @@ void debug_kusage(void) ((char *)h_free + dah_overhead + h_free->size); if ((char *)h_used - debug_alloc_pool != sizeof(debug_alloc_pool_aligned)) - kdb_printf("%s: h_used %p size %d caller %p\n", + kdb_printf("%s: h_used %px size %d caller %px\n", __func__, h_used, h_used->size, h_used->caller); out: spin_unlock(&dap_lock); From c2b94c72d93d0929f48157eef128c4f9d2e603ce Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 20 Sep 2018 08:59:14 -0400 Subject: [PATCH 495/726] kdb: Use strscpy with destination buffer size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by: Prarit Bhargava Cc: Jonathan Toppins Cc: Jason Wessel Cc: Daniel Thompson Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by: Daniel Thompson Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_io.c | 15 +++++++++------ kernel/debug/kdb/kdb_private.h | 2 +- kernel/debug/kdb/kdb_support.c | 10 +++++----- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index ed5d34925ad0..6a4b41484afe 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -216,7 +216,7 @@ static char *kdb_read(char *buffer, size_t bufsize) int count; int i; int diag, dtab_count; - int key; + int key, buf_size, ret; diag = kdbgetintenv("DTABCOUNT", &dtab_count); @@ -336,9 +336,8 @@ poll_again: else p_tmp = tmpbuffer; len = strlen(p_tmp); - count = kallsyms_symbol_complete(p_tmp, - sizeof(tmpbuffer) - - (p_tmp - tmpbuffer)); + buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer); + count = kallsyms_symbol_complete(p_tmp, buf_size); if (tab == 2 && count > 0) { kdb_printf("\n%d symbols are found.", count); if (count > dtab_count) { @@ -350,9 +349,13 @@ poll_again: } kdb_printf("\n"); for (i = 0; i < count; i++) { - if (WARN_ON(!kallsyms_symbol_next(p_tmp, i))) + ret = kallsyms_symbol_next(p_tmp, i, buf_size); + if (WARN_ON(!ret)) break; - kdb_printf("%s ", p_tmp); + if (ret != -E2BIG) + kdb_printf("%s ", p_tmp); + else + kdb_printf("%s... ", p_tmp); *(p_tmp + len) = '\0'; } if (i >= dtab_count) diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h index 1e5a502ba4a7..2118d8258b7c 100644 --- a/kernel/debug/kdb/kdb_private.h +++ b/kernel/debug/kdb/kdb_private.h @@ -83,7 +83,7 @@ typedef struct __ksymtab { unsigned long sym_start; unsigned long sym_end; } kdb_symtab_t; -extern int kallsyms_symbol_next(char *prefix_name, int flag); +extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size); extern int kallsyms_symbol_complete(char *prefix_name, int max_len); /* Exported Symbols for kernel loadable modules to use. */ diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c index 987eb73284d2..b14b0925c184 100644 --- a/kernel/debug/kdb/kdb_support.c +++ b/kernel/debug/kdb/kdb_support.c @@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len) * Parameters: * prefix_name prefix of a symbol name to lookup * flag 0 means search from the head, 1 means continue search. + * buf_size maximum length that can be written to prefix_name + * buffer * Returns: * 1 if a symbol matches the given prefix. * 0 if no string found */ -int kallsyms_symbol_next(char *prefix_name, int flag) +int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size) { int prefix_len = strlen(prefix_name); static loff_t pos; @@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag) pos = 0; while ((name = kdb_walk_kallsyms(&pos))) { - if (strncmp(name, prefix_name, prefix_len) == 0) { - strncpy(prefix_name, name, strlen(name)+1); - return 1; - } + if (!strncmp(name, prefix_name, prefix_len)) + return strscpy(prefix_name, name, buf_size); } return 0; } From 9eb62f0e1bc70ebc9b15837a0c4e8f12a7b910cb Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 16 Aug 2018 09:01:41 -0500 Subject: [PATCH 496/726] kdb: kdb_main: refactor code in kdb_md_line Replace the whole switch statement with a for loop. This makes the code clearer and easy to read. This also addresses the following Coverity warnings: Addresses-Coverity-ID: 115090 ("Missing break in switch") Addresses-Coverity-ID: 115091 ("Missing break in switch") Addresses-Coverity-ID: 114700 ("Missing break in switch") Suggested-by: Daniel Thompson Signed-off-by: Gustavo A. R. Silva Reviewed-by: Daniel Thompson [daniel.thompson@linaro.org: Tiny grammar change in description] Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_main.c | 21 +++------------------ 1 file changed, 3 insertions(+), 18 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 959242084b40..d72b32c66f7d 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1493,6 +1493,7 @@ static void kdb_md_line(const char *fmtstr, unsigned long addr, char cbuf[32]; char *c = cbuf; int i; + int j; unsigned long word; memset(cbuf, '\0', sizeof(cbuf)); @@ -1538,25 +1539,9 @@ static void kdb_md_line(const char *fmtstr, unsigned long addr, wc.word = word; #define printable_char(c) \ ({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; }) - switch (bytesperword) { - case 8: + for (j = 0; j < bytesperword; j++) *c++ = printable_char(*cp++); - *c++ = printable_char(*cp++); - *c++ = printable_char(*cp++); - *c++ = printable_char(*cp++); - addr += 4; - case 4: - *c++ = printable_char(*cp++); - *c++ = printable_char(*cp++); - addr += 2; - case 2: - *c++ = printable_char(*cp++); - addr++; - case 1: - *c++ = printable_char(*cp++); - addr++; - break; - } + addr += bytesperword; #undef printable_char } } From 01cb37351bafc1b44b962842926210115e231f0a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 23:18:25 -0500 Subject: [PATCH 497/726] kdb: kdb_keyboard: mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Daniel Thompson Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_keyboard.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/debug/kdb/kdb_keyboard.c b/kernel/debug/kdb/kdb_keyboard.c index 118527aa60ea..750497b0003a 100644 --- a/kernel/debug/kdb/kdb_keyboard.c +++ b/kernel/debug/kdb/kdb_keyboard.c @@ -173,11 +173,11 @@ int kdb_get_kbd_char(void) case KT_LATIN: if (isprint(keychar)) break; /* printable characters */ - /* drop through */ + /* fall through */ case KT_SPEC: if (keychar == K_ENTER) break; - /* drop through */ + /* fall through */ default: return -1; /* ignore unprintables */ } From 646558ff1643467d3b941b47f519867cbca462c3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 21:48:44 -0500 Subject: [PATCH 498/726] kdb: kdb_support: mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Daniel Thompson Signed-off-by: Daniel Thompson --- kernel/debug/kdb/kdb_support.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c index b14b0925c184..50bf9b119bad 100644 --- a/kernel/debug/kdb/kdb_support.c +++ b/kernel/debug/kdb/kdb_support.c @@ -432,7 +432,7 @@ int kdb_getphysword(unsigned long *word, unsigned long addr, size_t size) *word = w8; break; } - /* drop through */ + /* fall through */ default: diag = KDB_BADWIDTH; kdb_printf("kdb_getphysword: bad width %ld\n", (long) size); @@ -481,7 +481,7 @@ int kdb_getword(unsigned long *word, unsigned long addr, size_t size) *word = w8; break; } - /* drop through */ + /* fall through */ default: diag = KDB_BADWIDTH; kdb_printf("kdb_getword: bad width %ld\n", (long) size); @@ -525,7 +525,7 @@ int kdb_putword(unsigned long addr, unsigned long word, size_t size) diag = kdb_putarea(addr, w8); break; } - /* drop through */ + /* fall through */ default: diag = KDB_BADWIDTH; kdb_printf("kdb_putword: bad width %ld\n", (long) size); From fd35f192e42cf7c0df1e2480bfd5965e35b2f4ca Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Fri, 9 Nov 2018 00:53:40 -0500 Subject: [PATCH 499/726] integrity: support new struct public_key_signature encoding field On systems with IMA-appraisal enabled with a policy requiring file signatures, the "good" signature values are stored on the filesystem as extended attributes (security.ima). Signature verification failure would normally be limited to just a particular file (eg. executable), but during boot signature verification failure could result in a system hang. Defining and requiring a new public_key_signature field requires all callers of asymmetric signature verification to be updated to reflect the change. This patch updates the integrity asymmetric_verify() caller. Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]") Signed-off-by: Mimi Zohar Cc: David Howells Acked-by: Denis Kenzior Signed-off-by: James Morris --- security/integrity/digsig_asymmetric.c | 1 + 1 file changed, 1 insertion(+) diff --git a/security/integrity/digsig_asymmetric.c b/security/integrity/digsig_asymmetric.c index 6dc075144508..d775e03fbbcc 100644 --- a/security/integrity/digsig_asymmetric.c +++ b/security/integrity/digsig_asymmetric.c @@ -106,6 +106,7 @@ int asymmetric_verify(struct key *keyring, const char *sig, pks.pkey_algo = "rsa"; pks.hash_algo = hash_algo_name[hdr->hash_algo]; + pks.encoding = "pkcs1"; pks.digest = (u8 *)data; pks.digest_size = datalen; pks.s = hdr->sig; From e39d8a186ed002854196668cb7562ffdfbc6d379 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 13 Nov 2018 16:37:54 -0500 Subject: [PATCH 500/726] NFSv4: Fix an Oops during delegation callbacks If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by: Trond Myklebust --- fs/nfs/callback_proc.c | 4 ++-- fs/nfs/delegation.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index fa515d5ea5ba..7b861bbc0b43 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -66,7 +66,7 @@ __be32 nfs4_callback_getattr(void *argp, void *resp, out_iput: rcu_read_unlock(); trace_nfs4_cb_getattr(cps->clp, &args->fh, inode, -ntohl(res->status)); - iput(inode); + nfs_iput_and_deactive(inode); out: dprintk("%s: exit with status = %d\n", __func__, ntohl(res->status)); return res->status; @@ -108,7 +108,7 @@ __be32 nfs4_callback_recall(void *argp, void *resp, } trace_nfs4_cb_recall(cps->clp, &args->fh, inode, &args->stateid, -ntohl(res)); - iput(inode); + nfs_iput_and_deactive(inode); out: dprintk("%s: exit with status = %d\n", __func__, ntohl(res)); return res; diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 07b839560576..6ec2f78c1e19 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -850,16 +850,23 @@ nfs_delegation_find_inode_server(struct nfs_server *server, const struct nfs_fh *fhandle) { struct nfs_delegation *delegation; - struct inode *res = NULL; + struct inode *freeme, *res = NULL; list_for_each_entry_rcu(delegation, &server->delegations, super_list) { spin_lock(&delegation->lock); if (delegation->inode != NULL && nfs_compare_fh(fhandle, &NFS_I(delegation->inode)->fh) == 0) { - res = igrab(delegation->inode); + freeme = igrab(delegation->inode); + if (freeme && nfs_sb_active(freeme->i_sb)) + res = freeme; spin_unlock(&delegation->lock); if (res != NULL) return res; + if (freeme) { + rcu_read_unlock(); + iput(freeme); + rcu_read_lock(); + } return ERR_PTR(-EAGAIN); } spin_unlock(&delegation->lock); From 877181a8d9dc663f7a73f77f50af714d7888ec3b Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 13 Nov 2018 21:44:33 -0500 Subject: [PATCH 501/726] selinux: fix non-MLS handling in mls_context_to_sid() Commit 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") inadvertently changed how we handle labels that did not contain MLS information. This patch restores the proper behavior in mls_context_to_sid() and adds a comment explaining the proper behavior to help ensure this doesn't happen again. Fixes: 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") Reported-by: Stephen Smalley Signed-off-by: Paul Moore --- security/selinux/ss/mls.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c index 2fe459df3c85..b7efa2296969 100644 --- a/security/selinux/ss/mls.c +++ b/security/selinux/ss/mls.c @@ -245,9 +245,13 @@ int mls_context_to_sid(struct policydb *pol, char *rangep[2]; if (!pol->mls_enabled) { - if ((def_sid != SECSID_NULL && oldc) || (*scontext) == '\0') - return 0; - return -EINVAL; + /* + * With no MLS, only return -EINVAL if there is a MLS field + * and it did not come from an xattr. + */ + if (oldc && def_sid == SECSID_NULL) + return -EINVAL; + return 0; } /* From 437ccdc8ce629470babdda1a7086e2f477048cbd Mon Sep 17 00:00:00 2001 From: Satheesh Rajendran Date: Thu, 8 Nov 2018 10:47:56 +0530 Subject: [PATCH 502/726] powerpc/numa: Suppress "VPHN is not supported" messages When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by: Satheesh Rajendran Signed-off-by: Michael Ellerman --- arch/powerpc/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 3a048e98a132..ce28ae5ca080 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1178,7 +1178,7 @@ static long vphn_get_associativity(unsigned long cpu, switch (rc) { case H_FUNCTION: - printk(KERN_INFO + printk_once(KERN_INFO "VPHN is not supported. Disabling polling...\n"); stop_topology_update(); break; From 40dc948f234b73497c3278875eb08a01d5854d3f Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Tue, 13 Nov 2018 23:46:42 -0800 Subject: [PATCH 503/726] xtensa: fix boot parameters address translation The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov --- arch/xtensa/kernel/head.S | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 2f76118ecf62..9053a5622d2c 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -88,9 +88,12 @@ _SetupMMU: initialize_mmu #if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY rsr a2, excsave1 - movi a3, 0x08000000 + movi a3, XCHAL_KSEG_PADDR + bltu a2, a3, 1f + sub a2, a2, a3 + movi a3, XCHAL_KSEG_SIZE bgeu a2, a3, 1f - movi a3, 0xd0000000 + movi a3, XCHAL_KSEG_CACHED_VADDR add a2, a2, a3 wsr a2, excsave1 1: From 7b412b04a0c7000293008231ce8413056abb1982 Mon Sep 17 00:00:00 2001 From: Kuppuswamy Sathyanarayanan Date: Wed, 17 Oct 2018 11:40:26 -0700 Subject: [PATCH 504/726] usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() In dwc3_pci_quirks() function, gpiod lookup table is only registered for baytrail SOC. But in dwc3_pci_remove(), we try to unregistered it without any checks. This leads to NULL pointer de-reference exception in gpiod_remove_lookup_table() when unloading the module for non baytrail SOCs. This patch fixes this issue. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: Signed-off-by: Kuppuswamy Sathyanarayanan Reviewed-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 1286076a8890..842795856bf4 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -283,8 +283,10 @@ err: static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *dwc = pci_get_drvdata(pci); + struct pci_dev *pdev = dwc->pci; - gpiod_remove_lookup_table(&platform_bytcr_gpios); + if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) + gpiod_remove_lookup_table(&platform_bytcr_gpios); #ifdef CONFIG_PM cancel_work_sync(&dwc->wakeup_work); #endif From 3c135e8900199e3b9375c1eff808cceba2ee37de Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 18 Oct 2018 10:36:47 +0300 Subject: [PATCH 505/726] usb: dwc2: pci: Fix an error code in probe We added some error handling to this function but forgot to set the error code on this path. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Acked-by: Minas Harutyunyan Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index d257c541e51b..7afc10872f1f 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -120,6 +120,7 @@ static int dwc2_pci_probe(struct pci_dev *pci, dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); if (!dwc2) { dev_err(dev, "couldn't allocate dwc2 device\n"); + ret = -ENOMEM; goto err; } From a9c859033f6ec772f8e3228c343bb1321584ae0e Mon Sep 17 00:00:00 2001 From: Shen Jing Date: Thu, 1 Nov 2018 15:35:17 +0530 Subject: [PATCH 506/726] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8 since it causes list corruption followed by kernel panic: Workqueue: adb ffs_aio_cancel_worker RIP: 0010:__list_add_valid+0x4d/0x70 Call Trace: insert_work+0x47/0xb0 __queue_work+0xf6/0x400 queue_work_on+0x65/0x70 dwc3_gadget_giveback+0x44/0x50 [dwc3] dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3] ? finish_wait+0x80/0x80 usb_ep_dequeue+0x1e/0x90 process_one_work+0x18c/0x3b0 worker_thread+0x3c/0x390 ? process_one_work+0x3b0/0x3b0 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This issue is seen with warm reboot stability testing. Signed-off-by: Shen Jing Signed-off-by: Saranya Gopal Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 3ada83d81bda..31e8bf3578c8 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -215,7 +215,6 @@ struct ffs_io_data { struct mm_struct *mm; struct work_struct work; - struct work_struct cancellation_work; struct usb_ep *ep; struct usb_request *req; @@ -1073,31 +1072,22 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } -static void ffs_aio_cancel_worker(struct work_struct *work) -{ - struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, - cancellation_work); - - ENTER(); - - usb_ep_dequeue(io_data->ep, io_data->req); -} - static int ffs_aio_cancel(struct kiocb *kiocb) { struct ffs_io_data *io_data = kiocb->private; - struct ffs_data *ffs = io_data->ffs; + struct ffs_epfile *epfile = kiocb->ki_filp->private_data; int value; ENTER(); - if (likely(io_data && io_data->ep && io_data->req)) { - INIT_WORK(&io_data->cancellation_work, ffs_aio_cancel_worker); - queue_work(ffs->io_completion_wq, &io_data->cancellation_work); - value = -EINPROGRESS; - } else { + spin_lock_irq(&epfile->ffs->eps_lock); + + if (likely(io_data && io_data->ep && io_data->req)) + value = usb_ep_dequeue(io_data->ep, io_data->req); + else value = -EINVAL; - } + + spin_unlock_irq(&epfile->ffs->eps_lock); return value; } From 2fc6d4be35fb1e262f209758e25bfe2b7a113a7f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 1 Aug 2018 09:37:34 +0300 Subject: [PATCH 507/726] usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers When chaining ISOC TRBs together, only the first ISOC TRB should be of type ISOC_FIRST, all others should be of type ISOC. This patch fixes that. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: # v4.11+ Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 06e22afdf3d1..9faad896b3a1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1081,7 +1081,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, - maxp - rem, false, 0, + maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); @@ -1125,7 +1125,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, - false, 0, req->request.stream_id, + false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); } else if (req->request.zero && req->request.length && @@ -1141,7 +1141,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, /* Now prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, - false, 0, req->request.stream_id, + false, 1, req->request.stream_id, req->request.short_not_ok, req->request.no_interrupt); } else { From 6a67a20366f894c172734f28c5646bdbe48a46e3 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Mon, 12 Nov 2018 12:39:31 +0000 Subject: [PATCH 508/726] drm/i915: fix broadwell EU computation subslice_mask is an array indexed by slice, not subslice. Signed-off-by: Lionel Landwerlin Fixes: 8cc7669355136f ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712 Reviewed-by: Chris Wilson Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com (cherry picked from commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_device_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c index 0ef0c6448d53..01fa98299bae 100644 --- a/drivers/gpu/drm/i915/intel_device_info.c +++ b/drivers/gpu/drm/i915/intel_device_info.c @@ -474,7 +474,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) u8 eu_disabled_mask; u32 n_disabled; - if (!(sseu->subslice_mask[ss] & BIT(ss))) + if (!(sseu->subslice_mask[s] & BIT(ss))) /* skip disabled subslice */ continue; From a22612301ae61d78a7c0c82dc556931a35db0e91 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Fri, 9 Nov 2018 16:09:23 +0200 Subject: [PATCH 509/726] drm/i915/icl: Drop spurious register read from icl_dbuf_slices_update Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar Cc: Rodrigo Vivi Signed-off-by: Mika Kuoppala Reviewed-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com (cherry picked from commit 8577c319b6511fbc391f3775225fecd8b979bc26) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 0a4990d8843c..44e4491a4918 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -3176,8 +3176,7 @@ static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv) void icl_dbuf_slices_update(struct drm_i915_private *dev_priv, u8 req_slices) { - u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices; - u32 val; + const u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices; bool ret; if (req_slices > intel_dbuf_max_slices(dev_priv)) { @@ -3188,7 +3187,6 @@ void icl_dbuf_slices_update(struct drm_i915_private *dev_priv, if (req_slices == hw_enabled_slices || req_slices == 0) return; - val = I915_READ(DBUF_CTL_S2); if (req_slices > hw_enabled_slices) ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true); else From 4800bf7bc8c725e955fcbc6191cc872f43f506d3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 14 Nov 2018 08:17:18 -0700 Subject: [PATCH 510/726] block: fix 32 bit overflow in __blkdev_issue_discard() A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard") Tested-by: Darrick J. Wong Reviewed-by: Darrick J. Wong Signed-off-by: Dave Chinner Killed pointless WARN_ON(). Signed-off-by: Jens Axboe --- block/blk-lib.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index e8b3bb9bf375..5f2c429d4378 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -55,9 +55,11 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector, return -EINVAL; while (nr_sects) { - unsigned int req_sects = min_t(unsigned int, nr_sects, + sector_t req_sects = min_t(sector_t, nr_sects, bio_allowed_max_sectors(q)); + WARN_ON_ONCE((req_sects << 9) > UINT_MAX); + bio = blk_next_bio(bio, 0, gfp_mask); bio->bi_iter.bi_sector = sector; bio_set_dev(bio, bdev); From 8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 14 Nov 2018 16:25:51 +0800 Subject: [PATCH 511/726] SCSI: fix queue cleanup race before queue initialization is done c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones Cc: Bart Van Assche Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: James E.J. Bottomley Cc: stable Cc: jianchao.wang Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-core.c | 5 ++--- drivers/scsi/scsi_lib.c | 8 ++++++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index ce12515f9b9b..deb56932f8c4 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -798,9 +798,8 @@ void blk_cleanup_queue(struct request_queue *q) * dispatch may still be in-progress since we dispatch requests * from more than one contexts. * - * No need to quiesce queue if it isn't initialized yet since - * blk_freeze_queue() should be enough for cases of passthrough - * request. + * We rely on driver to deal with the race in case that queue + * initialization isn't done. */ if (q->mq_ops && blk_queue_init_done(q)) blk_mq_quiesce_queue(q); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c7fccbb8f554..fa6e0c3b3aa6 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -697,6 +697,12 @@ static bool scsi_end_request(struct request *req, blk_status_t error, */ scsi_mq_uninit_cmd(cmd); + /* + * queue is still alive, so grab the ref for preventing it + * from being cleaned up during running queue. + */ + percpu_ref_get(&q->q_usage_counter); + __blk_mq_end_request(req, error); if (scsi_target(sdev)->single_lun || @@ -704,6 +710,8 @@ static bool scsi_end_request(struct request *req, blk_status_t error, kblockd_schedule_work(&sdev->requeue_work); else blk_mq_run_hw_queues(q, true); + + percpu_ref_put(&q->q_usage_counter); } else { unsigned long flags; From 56a6c7268312cba9436b84cac01b3e502c5c511d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 14 Nov 2018 09:33:57 +0100 Subject: [PATCH 512/726] gnss: serial: fix synchronous write timeout Passing a timeout of zero to the synchronous serdev_device_write() helper does currently not imply to wait forever (unlike passing zero to serdev_device_wait_until_sent()). Instead, if there's insufficient room in the write buffer, we'd end up with an incomplete write. Fixes: 37768b054f20 ("gnss: add generic serial driver") Cc: stable # 4.19 Signed-off-by: Johan Hovold --- drivers/gnss/serial.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c index b01ba4438501..31e891f00175 100644 --- a/drivers/gnss/serial.c +++ b/drivers/gnss/serial.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -63,7 +64,7 @@ static int gnss_serial_write_raw(struct gnss_device *gdev, int ret; /* write is only buffered synchronously */ - ret = serdev_device_write(serdev, buf, count, 0); + ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT); if (ret < 0) return ret; From 1decef370456870bf448a565be95db636428e106 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 14 Nov 2018 09:37:54 +0100 Subject: [PATCH 513/726] gnss: sirf: fix synchronous write timeout Passing a timeout of zero to the synchronous serdev_device_write() helper does currently not imply to wait forever (unlike passing zero to serdev_device_wait_until_sent()). Instead, if there's insufficient room in the write buffer, we'd end up with an incomplete write. Fixes: d2efbbd18b1e ("gnss: add driver for sirfstar-based receivers") Cc: stable # 4.19 Signed-off-by: Johan Hovold --- drivers/gnss/sirf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gnss/sirf.c b/drivers/gnss/sirf.c index 79cb98950013..71d014edd167 100644 --- a/drivers/gnss/sirf.c +++ b/drivers/gnss/sirf.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -83,7 +84,7 @@ static int sirf_write_raw(struct gnss_device *gdev, const unsigned char *buf, int ret; /* write is only buffered synchronously */ - ret = serdev_device_write(serdev, buf, count, 0); + ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT); if (ret < 0) return ret; From 007b656851ed7f94ba0fa358ac3e5d7705da6846 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 12 Nov 2018 17:06:12 +0100 Subject: [PATCH 514/726] s390/ism: clear dmbe_mask bit before SMC IRQ handling SMC-D stress workload showed connection stalls. Since the firmware decides to skip raising an interrupt if the SBA DMBE mask bit is still set, this SBA DMBE mask bit should be cleared before the IRQ handling in the SMC code runs. Otherwise there are small windows possible with missing interrupts for incoming data. SMC-D currently does not care about the old value of the SBA DMBE mask. Acked-by: Sebastian Ott Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/ism_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index f96ec68af2e5..dcbf5c857743 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -415,9 +415,9 @@ static irqreturn_t ism_handle_irq(int irq, void *data) break; clear_bit_inv(bit, bv); + ism->sba->dmbe_mask[bit + ISM_DMB_BIT_OFFSET] = 0; barrier(); smcd_handle_irq(ism->smcd, bit + ISM_DMB_BIT_OFFSET); - ism->sba->dmbe_mask[bit + ISM_DMB_BIT_OFFSET] = 0; } if (ism->sba->e) { From 22454b79e6de05fa61a2a72d00d2eed798abbb75 Mon Sep 17 00:00:00 2001 From: Dennis Wassenberg Date: Tue, 13 Nov 2018 14:40:34 +0100 Subject: [PATCH 515/726] usb: core: Fix hub port connection events lost This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg Acked-by: Mathias Nyman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d9bd7576786a..0f9381b69a3b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2850,7 +2850,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, USB_PORT_FEAT_C_BH_PORT_RESET); usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - usb_clear_port_feature(hub->hdev, port1, + + if (udev) + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); /* From 66f93c5a02d5ba6ef17fef459143961382593212 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Thu, 15 Nov 2018 12:34:27 +1000 Subject: [PATCH 516/726] powerpc/64: Fix kernel stack 16-byte alignment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8, which causes the interrupt frame allocation on kernel entry to put the kernel stack out of alignment. Quadword (16-byte) alignment for the stack is required by both the 64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1). Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this in future. Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ptrace.h | 1 + arch/powerpc/kernel/setup_64.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index f73886a1a7f5..0b8a735b6d85 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -54,6 +54,7 @@ struct pt_regs #ifdef CONFIG_PPC64 unsigned long ppr; + unsigned long __pad; /* Maintain 16 byte interrupt stack alignment */ #endif }; #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 2a51e4cc8246..236c1151a3a7 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -636,6 +636,8 @@ static void *__init alloc_stack(unsigned long limit, int cpu) { unsigned long pa; + BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16); + pa = memblock_alloc_base_nid(THREAD_SIZE, THREAD_SIZE, limit, early_cpu_to_node(cpu), MEMBLOCK_NONE); if (!pa) { From f8504f4ca0a0e9f84546ef86e00b24d2ea9a0bd2 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 13 Nov 2018 01:08:25 +0800 Subject: [PATCH 517/726] l2tp: fix a sock refcnt leak in l2tp_tunnel_register This issue happens when trying to add an existent tunnel. It doesn't call sock_put() before returning -EEXIST to release the sock refcnt that was held by calling sock_hold() before the existence check. This patch is to fix it by holding the sock after doing the existence check. Fixes: f6cd651b056f ("l2tp: fix race in duplicate tunnel detection") Reported-by: Jianlin Shi Signed-off-by: Xin Long Reviewed-by: Guillaume Nault Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 82cdf9020b53..26f1d435696a 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1490,12 +1490,7 @@ int l2tp_tunnel_register(struct l2tp_tunnel *tunnel, struct net *net, goto err_sock; } - sk = sock->sk; - - sock_hold(sk); - tunnel->sock = sk; tunnel->l2tp_net = net; - pn = l2tp_pernet(net); spin_lock_bh(&pn->l2tp_tunnel_list_lock); @@ -1510,6 +1505,10 @@ int l2tp_tunnel_register(struct l2tp_tunnel *tunnel, struct net *net, list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list); spin_unlock_bh(&pn->l2tp_tunnel_list_lock); + sk = sock->sk; + sock_hold(sk); + tunnel->sock = sk; + if (tunnel->encap == L2TP_ENCAPTYPE_UDP) { struct udp_tunnel_sock_cfg udp_cfg = { .sk_user_data = tunnel, From ef1491e791308317bb9851a0ad380c4a68b58d54 Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Wed, 14 Nov 2018 09:55:40 -0800 Subject: [PATCH 518/726] efi: Fix debugobjects warning on 'efi_rts_work' The following commit: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects: ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated. Change the macro to just INIT_WORK() to eliminate the warning. Signed-off-by: Waiman Long Signed-off-by: Ard Biesheuvel Acked-by: Sai Praneeth Prakhya Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/runtime-wrappers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index a19d845bdb06..8903b9ccfc2b 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -67,7 +67,7 @@ struct efi_runtime_work efi_rts_work; } \ \ init_completion(&efi_rts_work.efi_rts_comp); \ - INIT_WORK_ONSTACK(&efi_rts_work.work, efi_call_rts); \ + INIT_WORK(&efi_rts_work.work, efi_call_rts); \ efi_rts_work.arg1 = _arg1; \ efi_rts_work.arg2 = _arg2; \ efi_rts_work.arg3 = _arg3; \ From 33412b8673135b18ea42beb7f5117ed0091798b6 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 14 Nov 2018 09:55:41 -0800 Subject: [PATCH 519/726] efi/arm: Revert deferred unmap of early memmap mapping Commit: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/arm-init.c | 4 ++++ drivers/firmware/efi/arm-runtime.c | 2 +- drivers/firmware/efi/memmap.c | 3 +++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c index 388a929baf95..1a6a77df8a5e 100644 --- a/drivers/firmware/efi/arm-init.c +++ b/drivers/firmware/efi/arm-init.c @@ -265,6 +265,10 @@ void __init efi_init(void) (params.mmap & ~PAGE_MASK))); init_screen_info(); + + /* ARM does not permit early mappings to persist across paging_init() */ + if (IS_ENABLED(CONFIG_ARM)) + efi_memmap_unmap(); } static int __init register_gop_device(void) diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c index 922cfb813109..a00934d263c5 100644 --- a/drivers/firmware/efi/arm-runtime.c +++ b/drivers/firmware/efi/arm-runtime.c @@ -110,7 +110,7 @@ static int __init arm_enable_runtime_services(void) { u64 mapsize; - if (!efi_enabled(EFI_BOOT) || !efi_enabled(EFI_MEMMAP)) { + if (!efi_enabled(EFI_BOOT)) { pr_info("EFI services will not be available.\n"); return 0; } diff --git a/drivers/firmware/efi/memmap.c b/drivers/firmware/efi/memmap.c index fa2904fb841f..38b686c67b17 100644 --- a/drivers/firmware/efi/memmap.c +++ b/drivers/firmware/efi/memmap.c @@ -118,6 +118,9 @@ int __init efi_memmap_init_early(struct efi_memory_map_data *data) void __init efi_memmap_unmap(void) { + if (!efi_enabled(EFI_MEMMAP)) + return; + if (!efi.memmap.late) { unsigned long size; From 72a58a63a164b4e9d2d914e65caeb551846883f1 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 14 Nov 2018 09:55:42 -0800 Subject: [PATCH 520/726] efi/arm/libstub: Pack FDT after populating it Commit: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") increased the allocation size for the FDT image created by the stub to a fixed value of 2 MB, to simplify the former code that made several attempts with increasing values for the size. This is reasonable given that the allocation is of type EFI_LOADER_DATA, which is released to the kernel unless it is explicitly memblock_reserve()d by the early boot code. However, this allocation size leaked into the 'size' field of the FDT header metadata, and so the entire allocation remains occupied by the device tree binary, even if most of it is not used to store device tree information. So call fdt_pack() to shrink the FDT data structure to its minimum size after populating all the fields, so that the remaining memory is no longer wasted. Signed-off-by: Ard Biesheuvel Cc: # v4.12+ Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/libstub/fdt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index 8830fa601e45..0c0d2312f4a8 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -158,6 +158,10 @@ static efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, return efi_status; } } + + /* shrink the FDT back to its minimum size */ + fdt_pack(fdt); + return EFI_SUCCESS; fdt_set_fail: From eff896288872d687d9662000ec9ae11b6d61766f Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 14 Nov 2018 09:55:43 -0800 Subject: [PATCH 521/726] efi/arm: Defer persistent reservations until after paging_init() The new memory EFI reservation feature we introduced to allow memory reservations to persist across kexec may trigger an unbounded number of calls to memblock_reserve(). The memblock subsystem can deal with this fine, but not before memblock resizing is enabled, which we can only do after paging_init(), when the memory we reallocate the array into is actually mapped. So break out the memreserve table processing into a separate routine and call it after paging_init() on arm64. On ARM, because of limited reviewing bandwidth of the maintainer, we cannot currently fix this, so instead, disable the EFI persistent memreserve entirely on ARM so we can fix it later. Tested-by: Marc Zyngier Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- arch/arm64/kernel/setup.c | 1 + drivers/firmware/efi/efi.c | 4 ++++ drivers/firmware/efi/libstub/arm-stub.c | 3 +++ include/linux/efi.h | 7 +++++++ 4 files changed, 15 insertions(+) diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 953e316521fc..f4fc1e0544b7 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -313,6 +313,7 @@ void __init setup_arch(char **cmdline_p) arm64_memblock_init(); paging_init(); + efi_apply_persistent_mem_reservations(); acpi_table_upgrade(); diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 249eb70691b0..72a4da76d274 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -592,7 +592,11 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz, early_memunmap(tbl, sizeof(*tbl)); } + return 0; +} +int __init efi_apply_persistent_mem_reservations(void) +{ if (efi.mem_reserve != EFI_INVALID_TABLE_ADDR) { unsigned long prsv = efi.mem_reserve; diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c index 30ac0c975f8a..3d36142cf812 100644 --- a/drivers/firmware/efi/libstub/arm-stub.c +++ b/drivers/firmware/efi/libstub/arm-stub.c @@ -75,6 +75,9 @@ void install_memreserve_table(efi_system_table_t *sys_table_arg) efi_guid_t memreserve_table_guid = LINUX_EFI_MEMRESERVE_TABLE_GUID; efi_status_t status; + if (IS_ENABLED(CONFIG_ARM)) + return; + status = efi_call_early(allocate_pool, EFI_LOADER_DATA, sizeof(*rsv), (void **)&rsv); if (status != EFI_SUCCESS) { diff --git a/include/linux/efi.h b/include/linux/efi.h index 845174e113ce..100ce4a4aff6 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -1167,6 +1167,8 @@ static inline bool efi_enabled(int feature) extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused); extern bool efi_is_table_address(unsigned long phys_addr); + +extern int efi_apply_persistent_mem_reservations(void); #else static inline bool efi_enabled(int feature) { @@ -1185,6 +1187,11 @@ static inline bool efi_is_table_address(unsigned long phys_addr) { return false; } + +static inline int efi_apply_persistent_mem_reservations(void) +{ + return 0; +} #endif extern int efi_status_to_err(efi_status_t status); From 63eb322d89c8505af9b4a3d703e85e42281ebaa0 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 14 Nov 2018 09:55:44 -0800 Subject: [PATCH 522/726] efi: Permit calling efi_mem_reserve_persistent() from atomic context Currently, efi_mem_reserve_persistent() may not be called from atomic context, since both the kmalloc() call and the memremap() call may sleep. The kmalloc() call is easy enough to fix, but the memremap() call needs to be moved into an init hook since we cannot control the memory allocation behavior of memremap() at the call site. Signed-off-by: Ard Biesheuvel Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/efi.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 72a4da76d274..fad7c62cfc0e 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -967,37 +967,44 @@ bool efi_is_table_address(unsigned long phys_addr) } static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock); +static struct linux_efi_memreserve *efi_memreserve_root __ro_after_init; int efi_mem_reserve_persistent(phys_addr_t addr, u64 size) { - struct linux_efi_memreserve *rsv, *parent; + struct linux_efi_memreserve *rsv; - if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR) + if (!efi_memreserve_root) return -ENODEV; - rsv = kmalloc(sizeof(*rsv), GFP_KERNEL); + rsv = kmalloc(sizeof(*rsv), GFP_ATOMIC); if (!rsv) return -ENOMEM; - parent = memremap(efi.mem_reserve, sizeof(*rsv), MEMREMAP_WB); - if (!parent) { - kfree(rsv); - return -ENOMEM; - } - rsv->base = addr; rsv->size = size; spin_lock(&efi_mem_reserve_persistent_lock); - rsv->next = parent->next; - parent->next = __pa(rsv); + rsv->next = efi_memreserve_root->next; + efi_memreserve_root->next = __pa(rsv); spin_unlock(&efi_mem_reserve_persistent_lock); - memunmap(parent); - return 0; } +static int __init efi_memreserve_root_init(void) +{ + if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR) + return -ENODEV; + + efi_memreserve_root = memremap(efi.mem_reserve, + sizeof(*efi_memreserve_root), + MEMREMAP_WB); + if (!efi_memreserve_root) + return -ENOMEM; + return 0; +} +early_initcall(efi_memreserve_root_init); + #ifdef CONFIG_KEXEC static int update_efi_random_seed(struct notifier_block *nb, unsigned long code, void *unused) From 4cff280a5fccf6513ed9e895bb3a4e7ad8b0cedc Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 14 Nov 2018 16:35:10 -0800 Subject: [PATCH 523/726] nvme-fc: resolve io failures during connect If an io error occurs on an io issued while connecting, recovery of the io falls flat as the state checking ends up nooping the error handler. Create an err_work work item that is scheduled upon an io error while connecting. The work thread terminates all io on all queues and marks the queues as not connected. The termination of the io will return back to the callee, which will then back out of the connection attempt and will reschedule, if possible, the connection attempt. The changes: - in case there are several commands hitting the error handler, a state flag is kept so that the error work is only scheduled once, on the first error. The subsequent errors can be ignored. - The calling sequence to stop keep alive and terminate the queues and their io is lifted from the reset routine. Made a small service routine used by both reset and err_work. - During debugging, found that the teardown path can reference an uninitialized pointer, resulting in a NULL pointer oops. The aen_ops weren't initialized yet. Add validation on their initialization before calling the teardown routine. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 75 +++++++++++++++++++++++++++++++++++------- 1 file changed, 64 insertions(+), 11 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 0b70c8bab045..54032c466636 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -152,6 +152,7 @@ struct nvme_fc_ctrl { bool ioq_live; bool assoc_active; + atomic_t err_work_active; u64 association_id; struct list_head ctrl_list; /* rport->ctrl_list */ @@ -160,6 +161,7 @@ struct nvme_fc_ctrl { struct blk_mq_tag_set tag_set; struct delayed_work connect_work; + struct work_struct err_work; struct kref ref; u32 flags; @@ -1531,6 +1533,10 @@ nvme_fc_abort_aen_ops(struct nvme_fc_ctrl *ctrl) struct nvme_fc_fcp_op *aen_op = ctrl->aen_ops; int i; + /* ensure we've initialized the ops once */ + if (!(aen_op->flags & FCOP_FLAGS_AEN)) + return; + for (i = 0; i < NVME_NR_AEN_COMMANDS; i++, aen_op++) __nvme_fc_abort_op(ctrl, aen_op); } @@ -2049,7 +2055,25 @@ nvme_fc_nvme_ctrl_freed(struct nvme_ctrl *nctrl) static void nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg) { - /* only proceed if in LIVE state - e.g. on first error */ + int active; + + /* + * if an error (io timeout, etc) while (re)connecting, + * it's an error on creating the new association. + * Start the error recovery thread if it hasn't already + * been started. It is expected there could be multiple + * ios hitting this path before things are cleaned up. + */ + if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) { + active = atomic_xchg(&ctrl->err_work_active, 1); + if (!active && !schedule_work(&ctrl->err_work)) { + atomic_set(&ctrl->err_work_active, 0); + WARN_ON(1); + } + return; + } + + /* Otherwise, only proceed if in LIVE state - e.g. on first error */ if (ctrl->ctrl.state != NVME_CTRL_LIVE) return; @@ -2814,6 +2838,7 @@ nvme_fc_delete_ctrl(struct nvme_ctrl *nctrl) { struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl); + cancel_work_sync(&ctrl->err_work); cancel_delayed_work_sync(&ctrl->connect_work); /* * kill the association on the link side. this will block @@ -2865,6 +2890,21 @@ nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status) } } +static void +__nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl) +{ + nvme_stop_keep_alive(&ctrl->ctrl); + + /* will block will waiting for io to terminate */ + nvme_fc_delete_association(ctrl); + + if (ctrl->ctrl.state != NVME_CTRL_CONNECTING && + !nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) + dev_err(ctrl->ctrl.device, + "NVME-FC{%d}: error_recovery: Couldn't change state " + "to CONNECTING\n", ctrl->cnum); +} + static void nvme_fc_reset_ctrl_work(struct work_struct *work) { @@ -2872,18 +2912,10 @@ nvme_fc_reset_ctrl_work(struct work_struct *work) container_of(work, struct nvme_fc_ctrl, ctrl.reset_work); int ret; + __nvme_fc_terminate_io(ctrl); + nvme_stop_ctrl(&ctrl->ctrl); - /* will block will waiting for io to terminate */ - nvme_fc_delete_association(ctrl); - - if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) { - dev_err(ctrl->ctrl.device, - "NVME-FC{%d}: error_recovery: Couldn't change state " - "to CONNECTING\n", ctrl->cnum); - return; - } - if (ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE) ret = nvme_fc_create_association(ctrl); else @@ -2897,6 +2929,24 @@ nvme_fc_reset_ctrl_work(struct work_struct *work) ctrl->cnum); } +static void +nvme_fc_connect_err_work(struct work_struct *work) +{ + struct nvme_fc_ctrl *ctrl = + container_of(work, struct nvme_fc_ctrl, err_work); + + __nvme_fc_terminate_io(ctrl); + + atomic_set(&ctrl->err_work_active, 0); + + /* + * Rescheduling the connection after recovering + * from the io error is left to the reconnect work + * item, which is what should have stalled waiting on + * the io that had the error that scheduled this work. + */ +} + static const struct nvme_ctrl_ops nvme_fc_ctrl_ops = { .name = "fc", .module = THIS_MODULE, @@ -3007,6 +3057,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, ctrl->cnum = idx; ctrl->ioq_live = false; ctrl->assoc_active = false; + atomic_set(&ctrl->err_work_active, 0); init_waitqueue_head(&ctrl->ioabort_wait); get_device(ctrl->dev); @@ -3014,6 +3065,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, INIT_WORK(&ctrl->ctrl.reset_work, nvme_fc_reset_ctrl_work); INIT_DELAYED_WORK(&ctrl->connect_work, nvme_fc_connect_ctrl_work); + INIT_WORK(&ctrl->err_work, nvme_fc_connect_err_work); spin_lock_init(&ctrl->lock); /* io queue count */ @@ -3103,6 +3155,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, fail_ctrl: nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING); cancel_work_sync(&ctrl->ctrl.reset_work); + cancel_work_sync(&ctrl->err_work); cancel_delayed_work_sync(&ctrl->connect_work); ctrl->ctrl.opts = NULL; From 2a2777990a342b05f611e78822fc4fa2d9789ade Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 14 Nov 2018 13:49:23 +0200 Subject: [PATCH 524/726] drm/i915: Move programming plane scaler to its own function. This cleans the code up slightly, and will make other changes easier. Signed-off-by: Maarten Lankhorst Reviewed-by: Matt Roper Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com (cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_sprite.c | 90 +++++++++++++++++------------ 1 file changed, 52 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 5fd2f7bf3927..873adcc20109 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -302,13 +302,63 @@ skl_plane_max_stride(struct intel_plane *plane, return min(8192 * cpp, 32768); } +static void +skl_program_scaler(struct drm_i915_private *dev_priv, + struct intel_plane *plane, + const struct intel_crtc_state *crtc_state, + const struct intel_plane_state *plane_state) +{ + enum plane_id plane_id = plane->id; + enum pipe pipe = plane->pipe; + int scaler_id = plane_state->scaler_id; + const struct intel_scaler *scaler = + &crtc_state->scaler_state.scalers[scaler_id]; + int crtc_x = plane_state->base.dst.x1; + int crtc_y = plane_state->base.dst.y1; + uint32_t crtc_w = drm_rect_width(&plane_state->base.dst); + uint32_t crtc_h = drm_rect_height(&plane_state->base.dst); + u16 y_hphase, uv_rgb_hphase; + u16 y_vphase, uv_rgb_vphase; + + /* Sizes are 0 based */ + crtc_w--; + crtc_h--; + + /* TODO: handle sub-pixel coordinates */ + if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) { + y_hphase = skl_scaler_calc_phase(1, false); + y_vphase = skl_scaler_calc_phase(1, false); + + /* MPEG2 chroma siting convention */ + uv_rgb_hphase = skl_scaler_calc_phase(2, true); + uv_rgb_vphase = skl_scaler_calc_phase(2, false); + } else { + /* not used */ + y_hphase = 0; + y_vphase = 0; + + uv_rgb_hphase = skl_scaler_calc_phase(1, false); + uv_rgb_vphase = skl_scaler_calc_phase(1, false); + } + + I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id), + PS_SCALER_EN | PS_PLANE_SEL(plane_id) | scaler->mode); + I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0); + I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id), + PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase)); + I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id), + PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase)); + I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y); + I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), + ((crtc_w + 1) << 16)|(crtc_h + 1)); +} + void skl_update_plane(struct intel_plane *plane, const struct intel_crtc_state *crtc_state, const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane->base.dev); - const struct drm_framebuffer *fb = plane_state->base.fb; enum plane_id plane_id = plane->id; enum pipe pipe = plane->pipe; u32 plane_ctl = plane_state->ctl; @@ -318,8 +368,6 @@ skl_update_plane(struct intel_plane *plane, u32 aux_stride = skl_plane_stride(plane_state, 1); int crtc_x = plane_state->base.dst.x1; int crtc_y = plane_state->base.dst.y1; - uint32_t crtc_w = drm_rect_width(&plane_state->base.dst); - uint32_t crtc_h = drm_rect_height(&plane_state->base.dst); uint32_t x = plane_state->color_plane[0].x; uint32_t y = plane_state->color_plane[0].y; uint32_t src_w = drm_rect_width(&plane_state->base.src) >> 16; @@ -329,8 +377,6 @@ skl_update_plane(struct intel_plane *plane, /* Sizes are 0 based */ src_w--; src_h--; - crtc_w--; - crtc_h--; spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); @@ -355,39 +401,7 @@ skl_update_plane(struct intel_plane *plane, /* program plane scaler */ if (plane_state->scaler_id >= 0) { - int scaler_id = plane_state->scaler_id; - const struct intel_scaler *scaler = - &crtc_state->scaler_state.scalers[scaler_id]; - u16 y_hphase, uv_rgb_hphase; - u16 y_vphase, uv_rgb_vphase; - - /* TODO: handle sub-pixel coordinates */ - if (fb->format->format == DRM_FORMAT_NV12) { - y_hphase = skl_scaler_calc_phase(1, false); - y_vphase = skl_scaler_calc_phase(1, false); - - /* MPEG2 chroma siting convention */ - uv_rgb_hphase = skl_scaler_calc_phase(2, true); - uv_rgb_vphase = skl_scaler_calc_phase(2, false); - } else { - /* not used */ - y_hphase = 0; - y_vphase = 0; - - uv_rgb_hphase = skl_scaler_calc_phase(1, false); - uv_rgb_vphase = skl_scaler_calc_phase(1, false); - } - - I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id), - PS_SCALER_EN | PS_PLANE_SEL(plane_id) | scaler->mode); - I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0); - I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id), - PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase)); - I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id), - PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase)); - I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y); - I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), - ((crtc_w + 1) << 16)|(crtc_h + 1)); + skl_program_scaler(dev_priv, plane, crtc_state, plane_state); I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0); } else { From 27971d613fcb5b6ad96320bc4f2c90f4d4fde768 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 14 Nov 2018 13:49:24 +0200 Subject: [PATCH 525/726] drm/i915: Clean up skl_program_scaler() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi (cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_sprite.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 873adcc20109..fa7eaace5f92 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -303,12 +303,11 @@ skl_plane_max_stride(struct intel_plane *plane, } static void -skl_program_scaler(struct drm_i915_private *dev_priv, - struct intel_plane *plane, +skl_program_scaler(struct intel_plane *plane, const struct intel_crtc_state *crtc_state, const struct intel_plane_state *plane_state) { - enum plane_id plane_id = plane->id; + struct drm_i915_private *dev_priv = to_i915(plane->base.dev); enum pipe pipe = plane->pipe; int scaler_id = plane_state->scaler_id; const struct intel_scaler *scaler = @@ -320,10 +319,6 @@ skl_program_scaler(struct drm_i915_private *dev_priv, u16 y_hphase, uv_rgb_hphase; u16 y_vphase, uv_rgb_vphase; - /* Sizes are 0 based */ - crtc_w--; - crtc_h--; - /* TODO: handle sub-pixel coordinates */ if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) { y_hphase = skl_scaler_calc_phase(1, false); @@ -342,15 +337,14 @@ skl_program_scaler(struct drm_i915_private *dev_priv, } I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id), - PS_SCALER_EN | PS_PLANE_SEL(plane_id) | scaler->mode); + PS_SCALER_EN | PS_PLANE_SEL(plane->id) | scaler->mode); I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0); I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id), PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase)); I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id), PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase)); I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y); - I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), - ((crtc_w + 1) << 16)|(crtc_h + 1)); + I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), (crtc_w << 16) | crtc_h); } void @@ -399,9 +393,8 @@ skl_update_plane(struct intel_plane *plane, (plane_state->color_plane[1].y << 16) | plane_state->color_plane[1].x); - /* program plane scaler */ if (plane_state->scaler_id >= 0) { - skl_program_scaler(dev_priv, plane, crtc_state, plane_state); + skl_program_scaler(plane, crtc_state, plane_state); I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0); } else { From 6e8adf6f4a4fa57dd3bef6b70de96e2b7b311204 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 14 Nov 2018 15:32:55 +0200 Subject: [PATCH 526/726] drm/i915: Account for scale factor when calculating initial phase MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila Tested-by: Maarten Lankhorst #irc Reviewed-by: Maarten Lankhorst #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 45 ++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_sprite.c | 20 +++++++++---- 3 files changed, 57 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 23d8008a93bb..a54843fdeb2f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4850,8 +4850,31 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe) * chroma samples for both of the luma samples, and thus we don't * actually get the expected MPEG2 chroma siting convention :( * The same behaviour is observed on pre-SKL platforms as well. + * + * Theory behind the formula (note that we ignore sub-pixel + * source coordinates): + * s = source sample position + * d = destination sample position + * + * Downscaling 4:1: + * -0.5 + * | 0.0 + * | | 1.5 (initial phase) + * | | | + * v v v + * | s | s | s | s | + * | d | + * + * Upscaling 1:4: + * -0.5 + * | -0.375 (initial phase) + * | | 0.0 + * | | | + * v v v + * | s | + * | d | d | d | d | */ -u16 skl_scaler_calc_phase(int sub, bool chroma_cosited) +u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited) { int phase = -0x8000; u16 trip = 0; @@ -4859,6 +4882,15 @@ u16 skl_scaler_calc_phase(int sub, bool chroma_cosited) if (chroma_cosited) phase += (sub - 1) * 0x8000 / sub; + phase += scale / (2 * sub); + + /* + * Hardware initial phase limited to [-0.5:1.5]. + * Since the max hardware scale factor is 3.0, we + * should never actually excdeed 1.0 here. + */ + WARN_ON(phase < -0x8000 || phase > 0x18000); + if (phase < 0) phase = 0x10000 + phase; else @@ -5067,13 +5099,20 @@ static void skylake_pfit_enable(struct intel_crtc *crtc) if (crtc->config->pch_pfit.enabled) { u16 uv_rgb_hphase, uv_rgb_vphase; + int pfit_w, pfit_h, hscale, vscale; int id; if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) return; - uv_rgb_hphase = skl_scaler_calc_phase(1, false); - uv_rgb_vphase = skl_scaler_calc_phase(1, false); + pfit_w = (crtc->config->pch_pfit.size >> 16) & 0xFFFF; + pfit_h = crtc->config->pch_pfit.size & 0xFFFF; + + hscale = (crtc->config->pipe_src_w << 16) / pfit_w; + vscale = (crtc->config->pipe_src_h << 16) / pfit_h; + + uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false); + uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false); id = scaler_state->scaler_id; I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN | diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f8dc84b2d2d3..8b298e5f012d 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1646,7 +1646,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode, void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state); -u16 skl_scaler_calc_phase(int sub, bool chroma_center); +u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center); int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state); int skl_max_scale(const struct intel_crtc_state *crtc_state, u32 pixel_format); diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index fa7eaace5f92..d3090a7537bb 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -318,22 +318,30 @@ skl_program_scaler(struct intel_plane *plane, uint32_t crtc_h = drm_rect_height(&plane_state->base.dst); u16 y_hphase, uv_rgb_hphase; u16 y_vphase, uv_rgb_vphase; + int hscale, vscale; + + hscale = drm_rect_calc_hscale(&plane_state->base.src, + &plane_state->base.dst, + 0, INT_MAX); + vscale = drm_rect_calc_vscale(&plane_state->base.src, + &plane_state->base.dst, + 0, INT_MAX); /* TODO: handle sub-pixel coordinates */ if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) { - y_hphase = skl_scaler_calc_phase(1, false); - y_vphase = skl_scaler_calc_phase(1, false); + y_hphase = skl_scaler_calc_phase(1, hscale, false); + y_vphase = skl_scaler_calc_phase(1, vscale, false); /* MPEG2 chroma siting convention */ - uv_rgb_hphase = skl_scaler_calc_phase(2, true); - uv_rgb_vphase = skl_scaler_calc_phase(2, false); + uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true); + uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false); } else { /* not used */ y_hphase = 0; y_vphase = 0; - uv_rgb_hphase = skl_scaler_calc_phase(1, false); - uv_rgb_vphase = skl_scaler_calc_phase(1, false); + uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false); + uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false); } I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id), From b2fed34a628df6118b5d4e13f49a33e15f704fa9 Mon Sep 17 00:00:00 2001 From: Gustavo Romero Date: Wed, 14 Nov 2018 21:33:30 -0500 Subject: [PATCH 527/726] selftests/powerpc: Adjust wild_bctr to build with old binutils Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero [mpe: Wrap long line] Signed-off-by: Michael Ellerman --- tools/testing/selftests/powerpc/mm/wild_bctr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/powerpc/mm/wild_bctr.c b/tools/testing/selftests/powerpc/mm/wild_bctr.c index 90469a9e49d4..f2fa101c5a6a 100644 --- a/tools/testing/selftests/powerpc/mm/wild_bctr.c +++ b/tools/testing/selftests/powerpc/mm/wild_bctr.c @@ -47,8 +47,9 @@ static int ok(void) return 0; } -#define REG_POISON 0x5a5aUL -#define POISONED_REG(n) ((REG_POISON << 48) | ((n) << 32) | (REG_POISON << 16) | (n)) +#define REG_POISON 0x5a5a +#define POISONED_REG(n) ((((unsigned long)REG_POISON) << 48) | ((n) << 32) | \ + (((unsigned long)REG_POISON) << 16) | (n)) static inline void poison_regs(void) { From 5a43911fd256f1c9748f3f82aee1c3a3adad2719 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 15 Nov 2018 11:58:51 +0100 Subject: [PATCH 528/726] drm/vc4: Fix NULL pointer dereference in the async update path vc4_plane_atomic_async_update() calls vc4_plane_atomic_check() which in turn calls vc4_plane_setup_clipping_and_scaling(), and since commit 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic"), this function accesses plane_state->state which will be NULL when called from the async update path because we're passing the current plane state, and plane_state->state has been assigned to NULL in drm_atomic_helper_swap_state(). Pass the new state instead of the current one (the new state has ->state set to a non-NULL value). Fixes: 58a6a36fe8e0 ("drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic") Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-1-boris.brezillon@bootlin.com --- drivers/gpu/drm/vc4/vc4_plane.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 9dc3fcbd290b..c6635f23918a 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -807,7 +807,7 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb) static void vc4_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *state) { - struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state); + struct vc4_plane_state *vc4_state, *new_vc4_state; if (plane->state->fb != state->fb) { vc4_plane_async_set_fb(plane, state->fb); @@ -828,7 +828,18 @@ static void vc4_plane_atomic_async_update(struct drm_plane *plane, plane->state->src_y = state->src_y; /* Update the display list based on the new crtc_x/y. */ - vc4_plane_atomic_check(plane, plane->state); + vc4_plane_atomic_check(plane, state); + + new_vc4_state = to_vc4_plane_state(state); + vc4_state = to_vc4_plane_state(plane->state); + + /* Update the current vc4_state pos0, pos2 and ptr0 dlist entries. */ + vc4_state->dlist[vc4_state->pos0_offset] = + new_vc4_state->dlist[vc4_state->pos0_offset]; + vc4_state->dlist[vc4_state->pos2_offset] = + new_vc4_state->dlist[vc4_state->pos2_offset]; + vc4_state->dlist[vc4_state->ptr0_offset] = + new_vc4_state->dlist[vc4_state->ptr0_offset]; /* Note that we can't just call vc4_plane_write_dlist() * because that would smash the context data that the HVS is From fcc86cb45d38ca2f24bcea9c29c7f4742041caed Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 15 Nov 2018 11:58:52 +0100 Subject: [PATCH 529/726] drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates drm_atomic_helper_setup_commit() auto-completes commit->flip_done when state->legacy_cursor_update is true, but we know for sure that we want a sync update when we call drm_atomic_helper_setup_commit() from vc4_atomic_commit(). Explicitly set state->legacy_cursor_update to false to prevent this auto-completion. Fixes: 184d3cf4f738 ("drm/vc4: Use wait_for_flip_done() instead of wait_for_vblanks()") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20181115105852.9844-2-boris.brezillon@bootlin.com --- drivers/gpu/drm/vc4/vc4_kms.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c index 127468785f74..1f94b9affe4b 100644 --- a/drivers/gpu/drm/vc4/vc4_kms.c +++ b/drivers/gpu/drm/vc4/vc4_kms.c @@ -214,6 +214,12 @@ static int vc4_atomic_commit(struct drm_device *dev, return 0; } + /* We know for sure we don't want an async update here. Set + * state->legacy_cursor_update to false to prevent + * drm_atomic_helper_setup_commit() from auto-completing + * commit->flip_done. + */ + state->legacy_cursor_update = false; ret = drm_atomic_helper_setup_commit(state, nonblock); if (ret) return ret; From 2f31a67f01a8beb22cae754c53522cb61a005750 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 15 Nov 2018 11:38:41 +0200 Subject: [PATCH 530/726] usb: xhci: Prevent bus suspend if a port connect change or polling state is detected USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 60 ++++++++++++++++++++++++++++--------- 1 file changed, 46 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index da98a11244e2..94aca1b5ac8a 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1474,15 +1474,18 @@ int xhci_bus_suspend(struct usb_hcd *hcd) unsigned long flags; struct xhci_hub *rhub; struct xhci_port **ports; + u32 portsc_buf[USB_MAXCHILDREN]; + bool wake_enabled; rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; + wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (bus_state->resuming_ports || /* USB2 */ bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); @@ -1490,26 +1493,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return -EBUSY; } } - - port_index = max_ports; + /* + * Prepare ports for suspend, but don't write anything before all ports + * are checked and we know bus suspend can proceed + */ bus_state->bus_suspended = 0; + port_index = max_ports; while (port_index--) { - /* suspend the port if the port is not suspended */ u32 t1, t2; - int slot_id; t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); + portsc_buf[port_index] = 0; - if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port_index); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - port_index + 1); - if (slot_id) { + /* Bail out if a USB3 port has a new device in link training */ + if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); + return -EBUSY; + } + + /* suspend ports in U0, or bail out for new connect changes */ + if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { + if ((t1 & PORT_CSC) && wake_enabled) { + bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); - spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port connect change\n"); + return -EBUSY; } + xhci_dbg(xhci, "port %d not suspended\n", port_index); t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); @@ -1518,7 +1531,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; @@ -1538,7 +1551,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, ports[port_index]->addr); + portsc_buf[port_index] = t2; + } + + /* write port settings, stopping and suspending ports if needed */ + port_index = max_ports; + while (port_index--) { + if (!portsc_buf[port_index]) + continue; + if (test_bit(port_index, &bus_state->bus_suspended)) { + int slot_id; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + writel(portsc_buf[port_index], ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); From 6ba990384e924476b5eed1734f3bcca0df6fd77e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 15 Nov 2018 03:25:37 -0500 Subject: [PATCH 531/726] bnxt_en: Fix RSS context allocation. Recent commit has added the reservation of RSS context. This requires bnxt_hwrm_vnic_qcaps() to be called before allocating any RSS contexts. The bnxt_hwrm_vnic_qcaps() call sets up proper flags that will determine how many RSS contexts to allocate to support NTUPLE. This causes a regression that too many RSS contexts are being reserved and causing resource shortage when enabling many VFs. Fix it by calling bnxt_hwrm_vnic_qcaps() earlier. Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index dd85d790f638..4a45a2b809ea 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10087,6 +10087,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } bnxt_hwrm_func_qcfg(bp); + bnxt_hwrm_vnic_qcaps(bp); bnxt_hwrm_port_led_qcaps(bp); bnxt_ethtool_init(bp); bnxt_dcb_init(bp); @@ -10120,7 +10121,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) VNIC_RSS_CFG_REQ_HASH_TYPE_UDP_IPV6; } - bnxt_hwrm_vnic_qcaps(bp); if (bnxt_rfs_supported(bp)) { dev->hw_features |= NETIF_F_NTUPLE; if (bnxt_rfs_capable(bp)) { From d19819297d9284bd990e22116b8b43d0abcbf488 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 15 Nov 2018 03:25:38 -0500 Subject: [PATCH 532/726] bnxt_en: Fix rx_l4_csum_errors counter on 57500 devices. The software counter structure is defined in both the CP ring's structure and the NQ ring's structure on the new devices. The legacy code adds the counter to the CP ring's structure and the counter won't get displayed since the ethtool code is looking at the NQ ring's structure. Since all other counters are contained in the NQ ring's structure, it makes more sense to count rx_l4_csum_errors in the NQ. Fixes: 50e3ab7836b5 ("bnxt_en: Allocate completion ring structures for 57500 series chips.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 4a45a2b809ea..585609990eee 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1675,7 +1675,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, } else { if (rxcmp1->rx_cmp_cfa_code_errors_v2 & RX_CMP_L4_CS_ERR_BITS) { if (dev->features & NETIF_F_RXCSUM) - cpr->rx_l4_csum_errors++; + bnapi->cp_ring.rx_l4_csum_errors++; } } From addd4df6d763556e16d5316e4e8cd441050cc2af Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 15 Nov 2018 03:25:39 -0500 Subject: [PATCH 533/726] bnxt_en: Disable RDMA support on the 57500 chips. There is no RDMA support on 57500 chips yet, so prevent bnxt_re from registering on these chips. There is intermittent failure if bnxt_re is allowed to register and proceed with RDMA operations. Fixes: 1ab968d2f1d6 ("bnxt_en: Add PCI ID for BCM57508 device.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index beee61292d5e..b59b382d34f9 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -43,6 +43,9 @@ static int bnxt_register_dev(struct bnxt_en_dev *edev, int ulp_id, if (ulp_id == BNXT_ROCE_ULP) { unsigned int max_stat_ctxs; + if (bp->flags & BNXT_FLAG_CHIP_P5) + return -EOPNOTSUPP; + max_stat_ctxs = bnxt_get_max_func_stat_ctxs(bp); if (max_stat_ctxs <= BNXT_MIN_ROCE_STAT_CTXS || bp->num_stat_ctxs == max_stat_ctxs) From ffd77621700ec3adcf859681e24910c38e0931f5 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 15 Nov 2018 03:25:40 -0500 Subject: [PATCH 534/726] bnxt_en: Workaround occasional TX timeout on 57500 A0. Hardware can sometimes not generate NQ MSIX with a single pending CP ring entry. This seems to always happen at the last entry of the CP ring before it wraps. Add logic to check all the CP rings for pending entries without the CP ring consumer index advancing. Calling HWRM_DBG_RING_INFO_GET to read the context of the CP ring will flush out the NQ entry and MSIX. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 65 +++++++++++++++++++++++ drivers/net/ethernet/broadcom/bnxt/bnxt.h | 3 ++ 2 files changed, 68 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 585609990eee..5d4147a75cad 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8714,6 +8714,26 @@ static int bnxt_set_features(struct net_device *dev, netdev_features_t features) return rc; } +static int bnxt_dbg_hwrm_ring_info_get(struct bnxt *bp, u8 ring_type, + u32 ring_id, u32 *prod, u32 *cons) +{ + struct hwrm_dbg_ring_info_get_output *resp = bp->hwrm_cmd_resp_addr; + struct hwrm_dbg_ring_info_get_input req = {0}; + int rc; + + bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_DBG_RING_INFO_GET, -1, -1); + req.ring_type = ring_type; + req.fw_ring_id = cpu_to_le32(ring_id); + mutex_lock(&bp->hwrm_cmd_lock); + rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); + if (!rc) { + *prod = le32_to_cpu(resp->producer_index); + *cons = le32_to_cpu(resp->consumer_index); + } + mutex_unlock(&bp->hwrm_cmd_lock); + return rc; +} + static void bnxt_dump_tx_sw_state(struct bnxt_napi *bnapi) { struct bnxt_tx_ring_info *txr = bnapi->tx_ring; @@ -8821,6 +8841,11 @@ static void bnxt_timer(struct timer_list *t) bnxt_queue_sp_work(bp); } } + + if ((bp->flags & BNXT_FLAG_CHIP_P5) && netif_carrier_ok(dev)) { + set_bit(BNXT_RING_COAL_NOW_SP_EVENT, &bp->sp_event); + bnxt_queue_sp_work(bp); + } bnxt_restart_timer: mod_timer(&bp->timer, jiffies + bp->current_interval); } @@ -8851,6 +8876,43 @@ static void bnxt_reset(struct bnxt *bp, bool silent) bnxt_rtnl_unlock_sp(bp); } +static void bnxt_chk_missed_irq(struct bnxt *bp) +{ + int i; + + if (!(bp->flags & BNXT_FLAG_CHIP_P5)) + return; + + for (i = 0; i < bp->cp_nr_rings; i++) { + struct bnxt_napi *bnapi = bp->bnapi[i]; + struct bnxt_cp_ring_info *cpr; + u32 fw_ring_id; + int j; + + if (!bnapi) + continue; + + cpr = &bnapi->cp_ring; + for (j = 0; j < 2; j++) { + struct bnxt_cp_ring_info *cpr2 = cpr->cp_ring_arr[j]; + u32 val[2]; + + if (!cpr2 || cpr2->has_more_work || + !bnxt_has_work(bp, cpr2)) + continue; + + if (cpr2->cp_raw_cons != cpr2->last_cp_raw_cons) { + cpr2->last_cp_raw_cons = cpr2->cp_raw_cons; + continue; + } + fw_ring_id = cpr2->cp_ring_struct.fw_ring_id; + bnxt_dbg_hwrm_ring_info_get(bp, + DBG_RING_INFO_GET_REQ_RING_TYPE_L2_CMPL, + fw_ring_id, &val[0], &val[1]); + } + } +} + static void bnxt_cfg_ntp_filters(struct bnxt *); static void bnxt_sp_task(struct work_struct *work) @@ -8930,6 +8992,9 @@ static void bnxt_sp_task(struct work_struct *work) if (test_and_clear_bit(BNXT_FLOW_STATS_SP_EVENT, &bp->sp_event)) bnxt_tc_flow_stats_work(bp); + if (test_and_clear_bit(BNXT_RING_COAL_NOW_SP_EVENT, &bp->sp_event)) + bnxt_chk_missed_irq(bp); + /* These functions below will clear BNXT_STATE_IN_SP_TASK. They * must be the last functions to be called before exiting. */ diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 498b373c992d..00bd17e55e99 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -798,6 +798,8 @@ struct bnxt_cp_ring_info { u8 had_work_done:1; u8 has_more_work:1; + u32 last_cp_raw_cons; + struct bnxt_coal rx_ring_coal; u64 rx_packets; u64 rx_bytes; @@ -1527,6 +1529,7 @@ struct bnxt { #define BNXT_LINK_SPEED_CHNG_SP_EVENT 14 #define BNXT_FLOW_STATS_SP_EVENT 15 #define BNXT_UPDATE_PHY_SP_EVENT 16 +#define BNXT_RING_COAL_NOW_SP_EVENT 17 struct bnxt_hw_resc hw_resc; struct bnxt_pf_info pf; From 83eb5c5cff32681f3769f502cb5589c7d7509bfe Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 15 Nov 2018 03:25:41 -0500 Subject: [PATCH 535/726] bnxt_en: Add software "missed_irqs" counter. To keep track of the number of times the workaround code for 57500 A0 has been triggered. This is a per NQ counter. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 ++++- 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5d4147a75cad..d4c300117529 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8909,6 +8909,7 @@ static void bnxt_chk_missed_irq(struct bnxt *bp) bnxt_dbg_hwrm_ring_info_get(bp, DBG_RING_INFO_GET_REQ_RING_TYPE_L2_CMPL, fw_ring_id, &val[0], &val[1]); + cpr->missed_irqs++; } } } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 00bd17e55e99..9e99d4ab3e06 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -818,6 +818,7 @@ struct bnxt_cp_ring_info { dma_addr_t hw_stats_map; u32 hw_stats_ctx_id; u64 rx_l4_csum_errors; + u64 missed_irqs; struct bnxt_ring_struct cp_ring_struct; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 48078564f025..4b734cd81f8b 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -137,7 +137,7 @@ reset_coalesce: return rc; } -#define BNXT_NUM_STATS 21 +#define BNXT_NUM_STATS 22 #define BNXT_RX_STATS_ENTRY(counter) \ { BNXT_RX_STATS_OFFSET(counter), __stringify(counter) } @@ -384,6 +384,7 @@ static void bnxt_get_ethtool_stats(struct net_device *dev, for (k = 0; k < stat_fields; j++, k++) buf[j] = le64_to_cpu(hw_stats[k]); buf[j++] = cpr->rx_l4_csum_errors; + buf[j++] = cpr->missed_irqs; bnxt_sw_func_stats[RX_TOTAL_DISCARDS].counter += le64_to_cpu(cpr->hw_stats->rx_discard_pkts); @@ -468,6 +469,8 @@ static void bnxt_get_strings(struct net_device *dev, u32 stringset, u8 *buf) buf += ETH_GSTRING_LEN; sprintf(buf, "[%d]: rx_l4_csum_errors", i); buf += ETH_GSTRING_LEN; + sprintf(buf, "[%d]: missed_irqs", i); + buf += ETH_GSTRING_LEN; } for (i = 0; i < BNXT_NUM_SW_FUNC_STATS; i++) { strcpy(buf, bnxt_sw_func_stats[i].string); From 8dc5ae2d48976764cf3498e97963fa06befefb0e Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Thu, 15 Nov 2018 03:25:42 -0500 Subject: [PATCH 536/726] bnxt_en: Fix filling time in bnxt_fill_coredump_record() Fix the year and month offset while storing it in bnxt_fill_coredump_record(). Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 4b734cd81f8b..6cc69a58478a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2945,8 +2945,8 @@ bnxt_fill_coredump_record(struct bnxt *bp, struct bnxt_coredump_record *record, record->asic_state = 0; strlcpy(record->system_name, utsname()->nodename, sizeof(record->system_name)); - record->year = cpu_to_le16(tm.tm_year); - record->month = cpu_to_le16(tm.tm_mon); + record->year = cpu_to_le16(tm.tm_year + 1900); + record->month = cpu_to_le16(tm.tm_mon + 1); record->day = cpu_to_le16(tm.tm_mday); record->hour = cpu_to_le16(tm.tm_hour); record->minute = cpu_to_le16(tm.tm_min); From b8c3c10cf68d7556466bb7d99f249ed586ddfbe3 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Mon, 12 Nov 2018 11:50:56 -0600 Subject: [PATCH 537/726] MAINTAINERS: Replace Vince Bridgers as Altera TSE maintainer Vince has moved to a different role. Replace him as Altera TSE maintainer. Signed-off-by: Thor Thayer Acked-by: Vince Bridgers Acked-by: Alan Tull Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0abecc528dac..5a4bd37d9d02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -717,7 +717,7 @@ F: include/linux/mfd/altera-a10sr.h F: include/dt-bindings/reset/altr,rst-mgr-a10sr.h ALTERA TRIPLE SPEED ETHERNET DRIVER -M: Vince Bridgers +M: Thor Thayer L: netdev@vger.kernel.org L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers) S: Maintained From ebcd210e93b2a984b7a7b82d45f7f0d21b7ec2d2 Mon Sep 17 00:00:00 2001 From: Ganesh Goudar Date: Thu, 15 Nov 2018 15:36:21 +0530 Subject: [PATCH 538/726] cxgb4: fix thermal zone build error with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")' tries to fix it but when cxgb4i is made built-in build fails again, use IS_REACHABLE instead of IS_ENABLED to fix the issue. Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies) Reported-by: Randy Dunlap Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/Kconfig | 1 - drivers/net/ethernet/chelsio/cxgb4/Makefile | 4 +--- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 ++-- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 75c1c5ed2387..e2cdfa75673f 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -67,7 +67,6 @@ config CHELSIO_T3 config CHELSIO_T4 tristate "Chelsio Communications T4/T5/T6 Ethernet support" depends on PCI && (IPV6 || IPV6=n) - depends on THERMAL || !THERMAL select FW_LOADER select MDIO select ZLIB_DEFLATE diff --git a/drivers/net/ethernet/chelsio/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile index 78e5d17a1d5f..91d8a885deba 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/Makefile +++ b/drivers/net/ethernet/chelsio/cxgb4/Makefile @@ -12,6 +12,4 @@ cxgb4-objs := cxgb4_main.o l2t.o smt.o t4_hw.o sge.o clip_tbl.o cxgb4_ethtool.o cxgb4-$(CONFIG_CHELSIO_T4_DCB) += cxgb4_dcb.o cxgb4-$(CONFIG_CHELSIO_T4_FCOE) += cxgb4_fcoe.o cxgb4-$(CONFIG_DEBUG_FS) += cxgb4_debugfs.o -ifdef CONFIG_THERMAL -cxgb4-objs += cxgb4_thermal.o -endif +cxgb4-$(CONFIG_THERMAL) += cxgb4_thermal.o diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 05a46926016a..d49db46254cd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5863,7 +5863,7 @@ fw_attach_fail: if (!is_t4(adapter->params.chip)) cxgb4_ptp_init(adapter); - if (IS_ENABLED(CONFIG_THERMAL) && + if (IS_REACHABLE(CONFIG_THERMAL) && !is_t4(adapter->params.chip) && (adapter->flags & FW_OK)) cxgb4_thermal_init(adapter); @@ -5932,7 +5932,7 @@ static void remove_one(struct pci_dev *pdev) if (!is_t4(adapter->params.chip)) cxgb4_ptp_stop(adapter); - if (IS_ENABLED(CONFIG_THERMAL)) + if (IS_REACHABLE(CONFIG_THERMAL)) cxgb4_thermal_remove(adapter); /* If we allocated filters, free up state associated with any From 7150ceaacb27f7b3bf494e72cd4be4e11612dfff Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 12 Nov 2018 22:33:22 +0000 Subject: [PATCH 539/726] rxrpc: Fix life check The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells Signed-off-by: David S. Miller --- Documentation/networking/rxrpc.txt | 17 +++++++++++------ fs/afs/rxrpc.c | 11 ++++++++++- include/net/af_rxrpc.h | 3 ++- include/trace/events/rxrpc.h | 2 ++ net/rxrpc/af_rxrpc.c | 27 +++++++++++++++++++++++---- 5 files changed, 48 insertions(+), 12 deletions(-) diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 605e00cdd6be..89f1302d593a 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -1056,18 +1056,23 @@ The kernel interface functions are as follows: u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call); + void rxrpc_kernel_probe_life(struct socket *sock, + struct rxrpc_call *call); - This returns a number that is updated when ACKs are received from the peer - (notably including PING RESPONSE ACKs which we can elicit by sending PING - ACKs to see if the call still exists on the server). The caller should - compare the numbers of two calls to see if the call is still alive after - waiting for a suitable interval. + The first function returns a number that is updated when ACKs are received + from the peer (notably including PING RESPONSE ACKs which we can elicit by + sending PING ACKs to see if the call still exists on the server). The + caller should compare the numbers of two calls to see if the call is still + alive after waiting for a suitable interval. This allows the caller to work out if the server is still contactable and if the call is still alive on the server whilst waiting for the server to process a client operation. - This function may transmit a PING ACK. + The second function causes a ping ACK to be transmitted to try to provoke + the peer into responding, which would then cause the value returned by the + first function to change. Note that this must be called in TASK_RUNNING + state. (*) Get reply timestamp. diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index 59970886690f..a7b44863d502 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -576,6 +576,7 @@ static long afs_wait_for_call_to_complete(struct afs_call *call, { signed long rtt2, timeout; long ret; + bool stalled = false; u64 rtt; u32 life, last_life; @@ -609,12 +610,20 @@ static long afs_wait_for_call_to_complete(struct afs_call *call, life = rxrpc_kernel_check_life(call->net->socket, call->rxcall); if (timeout == 0 && - life == last_life && signal_pending(current)) + life == last_life && signal_pending(current)) { + if (stalled) break; + __set_current_state(TASK_RUNNING); + rxrpc_kernel_probe_life(call->net->socket, call->rxcall); + timeout = rtt2; + stalled = true; + continue; + } if (life != last_life) { timeout = rtt2; last_life = life; + stalled = false; } timeout = schedule_timeout(timeout); diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h index de587948042a..1adefe42c0a6 100644 --- a/include/net/af_rxrpc.h +++ b/include/net/af_rxrpc.h @@ -77,7 +77,8 @@ int rxrpc_kernel_retry_call(struct socket *, struct rxrpc_call *, struct sockaddr_rxrpc *, struct key *); int rxrpc_kernel_check_call(struct socket *, struct rxrpc_call *, enum rxrpc_call_completion *, u32 *); -u32 rxrpc_kernel_check_life(struct socket *, struct rxrpc_call *); +u32 rxrpc_kernel_check_life(const struct socket *, const struct rxrpc_call *); +void rxrpc_kernel_probe_life(struct socket *, struct rxrpc_call *); u32 rxrpc_kernel_get_epoch(struct socket *, struct rxrpc_call *); bool rxrpc_kernel_get_reply_time(struct socket *, struct rxrpc_call *, ktime_t *); diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index 573d5b901fb1..5b50fe4906d2 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -181,6 +181,7 @@ enum rxrpc_timer_trace { enum rxrpc_propose_ack_trace { rxrpc_propose_ack_client_tx_end, rxrpc_propose_ack_input_data, + rxrpc_propose_ack_ping_for_check_life, rxrpc_propose_ack_ping_for_keepalive, rxrpc_propose_ack_ping_for_lost_ack, rxrpc_propose_ack_ping_for_lost_reply, @@ -380,6 +381,7 @@ enum rxrpc_tx_point { #define rxrpc_propose_ack_traces \ EM(rxrpc_propose_ack_client_tx_end, "ClTxEnd") \ EM(rxrpc_propose_ack_input_data, "DataIn ") \ + EM(rxrpc_propose_ack_ping_for_check_life, "ChkLife") \ EM(rxrpc_propose_ack_ping_for_keepalive, "KeepAlv") \ EM(rxrpc_propose_ack_ping_for_lost_ack, "LostAck") \ EM(rxrpc_propose_ack_ping_for_lost_reply, "LostRpl") \ diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 64362d078da8..a2522f9d71e2 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -375,16 +375,35 @@ EXPORT_SYMBOL(rxrpc_kernel_end_call); * getting ACKs from the server. Returns a number representing the life state * which can be compared to that returned by a previous call. * - * If this is a client call, ping ACKs will be sent to the server to find out - * whether it's still responsive and whether the call is still alive on the - * server. + * If the life state stalls, rxrpc_kernel_probe_life() should be called and + * then 2RTT waited. */ -u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call) +u32 rxrpc_kernel_check_life(const struct socket *sock, + const struct rxrpc_call *call) { return call->acks_latest; } EXPORT_SYMBOL(rxrpc_kernel_check_life); +/** + * rxrpc_kernel_probe_life - Poke the peer to see if it's still alive + * @sock: The socket the call is on + * @call: The call to check + * + * In conjunction with rxrpc_kernel_check_life(), allow a kernel service to + * find out whether a call is still alive by pinging it. This should cause the + * life state to be bumped in about 2*RTT. + * + * The must be called in TASK_RUNNING state on pain of might_sleep() objecting. + */ +void rxrpc_kernel_probe_life(struct socket *sock, struct rxrpc_call *call) +{ + rxrpc_propose_ACK(call, RXRPC_ACK_PING, 0, 0, true, false, + rxrpc_propose_ack_ping_for_check_life); + rxrpc_send_ack_packet(call, true, NULL); +} +EXPORT_SYMBOL(rxrpc_kernel_probe_life); + /** * rxrpc_kernel_get_epoch - Retrieve the epoch value from a call. * @sock: The socket the call is on From 08e14fe429a07475ee9f29a283945d602e4a6d92 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 12 Nov 2018 16:17:16 -0800 Subject: [PATCH 540/726] net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows When EDT conversion happened, fq lost the ability to enfore a maxrate for all flows. It kept it for non EDT flows. This commit restores the functionality. Tested: tc qd replace dev eth0 root fq maxrate 500Mbit netperf -P0 -H host -- -O THROUGHPUT 489.75 Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_fq.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c index 4b1af706896c..25a7cf6d380f 100644 --- a/net/sched/sch_fq.c +++ b/net/sched/sch_fq.c @@ -469,22 +469,29 @@ begin: goto begin; } prefetch(&skb->end); - f->credit -= qdisc_pkt_len(skb); + plen = qdisc_pkt_len(skb); + f->credit -= plen; - if (ktime_to_ns(skb->tstamp) || !q->rate_enable) + if (!q->rate_enable) goto out; rate = q->flow_max_rate; - if (skb->sk) - rate = min(skb->sk->sk_pacing_rate, rate); - if (rate <= q->low_rate_threshold) { - f->credit = 0; - plen = qdisc_pkt_len(skb); - } else { - plen = max(qdisc_pkt_len(skb), q->quantum); - if (f->credit > 0) - goto out; + /* If EDT time was provided for this skb, we need to + * update f->time_next_packet only if this qdisc enforces + * a flow max rate. + */ + if (!skb->tstamp) { + if (skb->sk) + rate = min(skb->sk->sk_pacing_rate, rate); + + if (rate <= q->low_rate_threshold) { + f->credit = 0; + } else { + plen = max(plen, q->quantum); + if (f->credit > 0) + goto out; + } } if (rate != ~0UL) { u64 len = (u64)plen * NSEC_PER_SEC; From 66e839030fd698586734e017fd55c4f2a89dba0b Mon Sep 17 00:00:00 2001 From: Matt Chen Date: Fri, 3 Aug 2018 14:29:20 +0800 Subject: [PATCH 541/726] iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/acpi.h | 4 +++- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.h b/drivers/net/wireless/intel/iwlwifi/fw/acpi.h index 2439e98431ee..7492dfb6729b 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.h @@ -6,6 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2017 Intel Deutschland GmbH + * Copyright(c) 2018 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -26,6 +27,7 @@ * BSD LICENSE * * Copyright(c) 2017 Intel Deutschland GmbH + * Copyright(c) 2018 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -81,7 +83,7 @@ #define ACPI_WRDS_WIFI_DATA_SIZE (ACPI_SAR_TABLE_SIZE + 2) #define ACPI_EWRD_WIFI_DATA_SIZE ((ACPI_SAR_PROFILE_NUM - 1) * \ ACPI_SAR_TABLE_SIZE + 3) -#define ACPI_WGDS_WIFI_DATA_SIZE 18 +#define ACPI_WGDS_WIFI_DATA_SIZE 19 #define ACPI_WRDD_WIFI_DATA_SIZE 2 #define ACPI_SPLC_WIFI_DATA_SIZE 2 diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index dade206d5511..899f4a6432fb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -893,7 +893,7 @@ static int iwl_mvm_sar_geo_init(struct iwl_mvm *mvm) IWL_DEBUG_RADIO(mvm, "Sending GEO_TX_POWER_LIMIT\n"); BUILD_BUG_ON(ACPI_NUM_GEO_PROFILES * ACPI_WGDS_NUM_BANDS * - ACPI_WGDS_TABLE_SIZE != ACPI_WGDS_WIFI_DATA_SIZE); + ACPI_WGDS_TABLE_SIZE + 1 != ACPI_WGDS_WIFI_DATA_SIZE); BUILD_BUG_ON(ACPI_NUM_GEO_PROFILES > IWL_NUM_GEO_PROFILES); From ec484d03ef0df8d34086b95710e355a259cbe1f2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 16 Aug 2018 13:25:48 +0300 Subject: [PATCH 542/726] iwlwifi: mvm: support sta_statistics() even on older firmware The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 505b0385d800..7c09ce20e8b1 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4444,10 +4444,6 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw, sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL_AVG); } - if (!fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) - return; - /* if beacon filtering isn't on mac80211 does it anyway */ if (!(vif->driver_flags & IEEE80211_VIF_BEACON_FILTER)) return; From 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Oct 2018 11:16:54 +0300 Subject: [PATCH 543/726] iwlwifi: mvm: fix regulatory domain update when the firmware starts When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 ++++++-- drivers/net/wireless/intel/iwlwifi/mvm/nvm.c | 5 ++--- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 7c09ce20e8b1..00f831d88366 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -301,8 +301,12 @@ struct ieee80211_regdomain *iwl_mvm_get_regdomain(struct wiphy *wiphy, goto out; } - if (changed) - *changed = (resp->status == MCC_RESP_NEW_CHAN_PROFILE); + if (changed) { + u32 status = le32_to_cpu(resp->status); + + *changed = (status == MCC_RESP_NEW_CHAN_PROFILE || + status == MCC_RESP_ILLEGAL); + } regd = iwl_parse_nvm_mcc_info(mvm->trans->dev, mvm->cfg, __le32_to_cpu(resp->n_channels), diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c index 3633f27d048a..6fc5cc1f2b5b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c @@ -539,9 +539,8 @@ iwl_mvm_update_mcc(struct iwl_mvm *mvm, const char *alpha2, } IWL_DEBUG_LAR(mvm, - "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') change: %d n_chans: %d\n", - status, mcc, mcc >> 8, mcc & 0xff, - !!(status == MCC_RESP_NEW_CHAN_PROFILE), n_channels); + "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') n_chans: %d\n", + status, mcc, mcc >> 8, mcc & 0xff, n_channels); exit: iwl_free_resp(&cmd); From 54f3f994e9964466855e11068c0f7d952d58b260 Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Mon, 20 Aug 2018 17:16:21 +0300 Subject: [PATCH 544/726] iwlwifi: fix D3 debug data buffer memory leak If the driver is unloaded when D3 debug data pulling is enabled but not triggered, it doesn't release the data buffer. Fix this by adding iwl_fw_runtime_free and calling it from the relevant places. Fixes: 2d8c261511ab ("iwlwifi: add d3 debug data support") Signed-off-by: Shahar S Matityahu Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/runtime.h | 6 +++++- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/runtime.h b/drivers/net/wireless/intel/iwlwifi/fw/runtime.h index 6b95d0e75889..2b8b50a77990 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/runtime.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/runtime.h @@ -154,7 +154,11 @@ void iwl_fw_runtime_init(struct iwl_fw_runtime *fwrt, struct iwl_trans *trans, const struct iwl_fw_runtime_ops *ops, void *ops_ctx, struct dentry *dbgfs_dir); -void iwl_fw_runtime_exit(struct iwl_fw_runtime *fwrt); +static inline void iwl_fw_runtime_free(struct iwl_fw_runtime *fwrt) +{ + kfree(fwrt->dump.d3_debug_data); + fwrt->dump.d3_debug_data = NULL; +} void iwl_fw_runtime_suspend(struct iwl_fw_runtime *fwrt); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 0e2092526fae..af3fba10abc1 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -858,6 +858,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, iwl_mvm_thermal_exit(mvm); out_free: iwl_fw_flush_dump(&mvm->fwrt); + iwl_fw_runtime_free(&mvm->fwrt); if (iwlmvm_mod_params.init_dbg) return op_mode; @@ -910,6 +911,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode) iwl_mvm_tof_clean(mvm); + iwl_fw_runtime_free(&mvm->fwrt); mutex_destroy(&mvm->mutex); mutex_destroy(&mvm->d0i3_suspend_mutex); From 5d041c46ccb9b48acc110e214beff5e2789311df Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 17 Oct 2018 08:35:15 +0300 Subject: [PATCH 545/726] iwlwifi: mvm: don't use SAR Geo if basic SAR is not used We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 36 ++++++++++++++++----- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 899f4a6432fb..2ba890445c35 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -928,6 +928,11 @@ static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm) return -ENOENT; } +static int iwl_mvm_sar_get_wgds_table(struct iwl_mvm *mvm) +{ + return -ENOENT; +} + static int iwl_mvm_sar_geo_init(struct iwl_mvm *mvm) { return 0; @@ -954,8 +959,11 @@ static int iwl_mvm_sar_init(struct iwl_mvm *mvm) IWL_DEBUG_RADIO(mvm, "WRDS SAR BIOS table invalid or unavailable. (%d)\n", ret); - /* if not available, don't fail and don't bother with EWRD */ - return 0; + /* + * If not available, don't fail and don't bother with EWRD. + * Return 1 to tell that we can't use WGDS either. + */ + return 1; } ret = iwl_mvm_sar_get_ewrd_table(mvm); @@ -968,9 +976,13 @@ static int iwl_mvm_sar_init(struct iwl_mvm *mvm) /* choose profile 1 (WRDS) as default for both chains */ ret = iwl_mvm_sar_select_profile(mvm, 1, 1); - /* if we don't have profile 0 from BIOS, just skip it */ + /* + * If we don't have profile 0 from BIOS, just skip it. This + * means that SAR Geo will not be enabled either, even if we + * have other valid profiles. + */ if (ret == -ENOENT) - return 0; + return 1; return ret; } @@ -1168,11 +1180,19 @@ int iwl_mvm_up(struct iwl_mvm *mvm) iwl_mvm_unref(mvm, IWL_MVM_REF_UCODE_DOWN); ret = iwl_mvm_sar_init(mvm); - if (ret) - goto error; + if (ret == 0) { + ret = iwl_mvm_sar_geo_init(mvm); + } else if (ret > 0 && !iwl_mvm_sar_get_wgds_table(mvm)) { + /* + * If basic SAR is not available, we check for WGDS, + * which should *not* be available either. If it is + * available, issue an error, because we can't use SAR + * Geo without basic SAR. + */ + IWL_ERR(mvm, "BIOS contains WGDS but no WRDS\n"); + } - ret = iwl_mvm_sar_geo_init(mvm); - if (ret) + if (ret < 0) goto error; iwl_mvm_leds_sync(mvm); From 69756c6ff0de478c10100481f16c966dde3b5339 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Thu, 15 Nov 2018 17:19:12 -0500 Subject: [PATCH 546/726] drm/amdgpu: Add amdgpu "max bpc" connector property (v2) [Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas Acked-by: Alex Deucher Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 7 +++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 2 ++ 2 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 6748cd7fc129..686a26de50f9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -626,6 +626,13 @@ int amdgpu_display_modeset_create_props(struct amdgpu_device *adev) "dither", amdgpu_dither_enum_list, sz); + if (amdgpu_device_has_dc_support(adev)) { + adev->mode_info.max_bpc_property = + drm_property_create_range(adev->ddev, 0, "max bpc", 8, 16); + if (!adev->mode_info.max_bpc_property) + return -ENOMEM; + } + return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h index b9e9e8b02fb7..d1b4d9b6aae0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h @@ -339,6 +339,8 @@ struct amdgpu_mode_info { struct drm_property *audio_property; /* FMT dithering */ struct drm_property *dither_property; + /* maximum number of bits per channel for monitor color */ + struct drm_property *max_bpc_property; /* hardcoded DFP edid from BIOS */ struct edid *bios_hardcoded_edid; int bios_hardcoded_edid_size; From 07e3a1cfb0568b6d8d7862077029af96af6690ea Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Thu, 15 Nov 2018 17:21:34 -0500 Subject: [PATCH 547/726] drm/amd/display: Support amdgpu "max bpc" connector property (v2) [Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas Acked-by: Alex Deucher Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 16 ++++++++++++++++ .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + 2 files changed, 17 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index c1262f62cd9f..ca925200fe09 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2358,8 +2358,15 @@ static void update_stream_scaling_settings(const struct drm_display_mode *mode, static enum dc_color_depth convert_color_depth_from_display_info(const struct drm_connector *connector) { + struct dm_connector_state *dm_conn_state = + to_dm_connector_state(connector->state); uint32_t bpc = connector->display_info.bpc; + /* TODO: Remove this when there's support for max_bpc in drm */ + if (dm_conn_state && bpc > dm_conn_state->max_bpc) + /* Round down to nearest even number. */ + bpc = dm_conn_state->max_bpc - (dm_conn_state->max_bpc & 1); + switch (bpc) { case 0: /* @@ -2943,6 +2950,9 @@ int amdgpu_dm_connector_atomic_set_property(struct drm_connector *connector, } else if (property == adev->mode_info.underscan_property) { dm_new_state->underscan_enable = val; ret = 0; + } else if (property == adev->mode_info.max_bpc_property) { + dm_new_state->max_bpc = val; + ret = 0; } return ret; @@ -2985,6 +2995,9 @@ int amdgpu_dm_connector_atomic_get_property(struct drm_connector *connector, } else if (property == adev->mode_info.underscan_property) { *val = dm_state->underscan_enable; ret = 0; + } else if (property == adev->mode_info.max_bpc_property) { + *val = dm_state->max_bpc; + ret = 0; } return ret; } @@ -3795,6 +3808,9 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm, drm_object_attach_property(&aconnector->base.base, adev->mode_info.underscan_vborder_property, 0); + drm_object_attach_property(&aconnector->base.base, + adev->mode_info.max_bpc_property, + 0); } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 924a38a1fc44..6e069d777ab2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -204,6 +204,7 @@ struct dm_connector_state { enum amdgpu_rmx_type scaling; uint8_t underscan_vborder; uint8_t underscan_hborder; + uint8_t max_bpc; bool underscan_enable; bool freesync_enable; bool freesync_capable; From 1229ace4a4a2e2c982a32fb075dc1bf95423924f Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 12 Nov 2018 22:18:01 +0000 Subject: [PATCH 548/726] MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation Both the Loongson3 & SGI-IP27 platforms set max_low_pfn to the last available PFN describing memory. They both do it in paging_init() which is later than ideal since max_low_pfn is used before that function is called. Simplify both platforms to trivially initialize max_low_pfn using the end address of DRAM, and do it earlier in prom_meminit(). Signed-off-by: Paul Burton Suggested-by: Mike Rapoport Tested-by: Thomas Bogendoerfer Patchwork: https://patchwork.linux-mips.org/patch/21104/ References: https://patchwork.linux-mips.org/patch/21031/ Cc: Huacai Chen Cc: Mike Rapoport Cc: Thomas Bogendoerfer Cc: linux-mips@linux-mips.org --- arch/mips/loongson64/loongson-3/numa.c | 12 ++---------- arch/mips/sgi-ip27/ip27-memory.c | 11 +---------- 2 files changed, 3 insertions(+), 20 deletions(-) diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c index 622761878cd1..60bf0a1cb757 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/loongson-3/numa.c @@ -231,6 +231,8 @@ static __init void prom_meminit(void) cpumask_clear(&__node_data[(node)]->cpumask); } } + max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); + for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) { node = cpu / loongson_sysconf.cores_per_node; if (node >= num_online_nodes()) @@ -248,19 +250,9 @@ static __init void prom_meminit(void) void __init paging_init(void) { - unsigned node; unsigned long zones_size[MAX_NR_ZONES] = {0, }; pagetable_init(); - - for_each_online_node(node) { - unsigned long start_pfn, end_pfn; - - get_pfn_range_for_nid(node, &start_pfn, &end_pfn); - - if (end_pfn > max_low_pfn) - max_low_pfn = end_pfn; - } #ifdef CONFIG_ZONE_DMA32 zones_size[ZONE_DMA32] = MAX_DMA32_PFN; #endif diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index d8b8444d6795..813d13f92957 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -435,6 +435,7 @@ void __init prom_meminit(void) mlreset(); szmem(); + max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); for (node = 0; node < MAX_COMPACT_NODES; node++) { if (node_online(node)) { @@ -455,18 +456,8 @@ extern void setup_zero_pages(void); void __init paging_init(void) { unsigned long zones_size[MAX_NR_ZONES] = {0, }; - unsigned node; pagetable_init(); - - for_each_online_node(node) { - unsigned long start_pfn, end_pfn; - - get_pfn_range_for_nid(node, &start_pfn, &end_pfn); - - if (end_pfn > max_low_pfn) - max_low_pfn = end_pfn; - } zones_size[ZONE_NORMAL] = max_low_pfn; free_area_init_nodes(zones_size); } From bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 15 Nov 2018 18:05:13 +0200 Subject: [PATCH 549/726] net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 2e84f10f59ba..1a11bc0e1612 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -363,6 +363,7 @@ int mlx4_mr_hw_write_mpt(struct mlx4_dev *dev, struct mlx4_mr *mmr, container_of((void *)mpt_entry, struct mlx4_cmd_mailbox, buf); + (*mpt_entry)->lkey = 0; err = mlx4_SW2HW_MPT(dev, mailbox, key); } From 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 15 Nov 2018 18:05:14 +0200 Subject: [PATCH 550/726] net/mlx4_core: Fix uninitialized variable compilation warning Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c index deef5a998985..9af34e03892c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c @@ -337,7 +337,7 @@ void mlx4_zone_allocator_destroy(struct mlx4_zone_allocator *zone_alloc) static u32 __mlx4_alloc_from_zone(struct mlx4_zone_entry *zone, int count, int align, u32 skip_mask, u32 *puid) { - u32 uid; + u32 uid = 0; u32 res; struct mlx4_zone_allocator *zone_alloc = zone->allocator; struct mlx4_zone_entry *curr_node; From a463146e67c848cbab5ce706d6528281b7cded08 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Thu, 15 Nov 2018 18:05:15 +0200 Subject: [PATCH 551/726] net/mlx4: Fix UBSAN warning of signed integer overflow UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index ebcd2778eeb3..23f1b5b512c2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -540,8 +540,8 @@ struct slave_list { struct resource_allocator { spinlock_t alloc_lock; /* protect quotas */ union { - int res_reserved; - int res_port_rsvd[MLX4_MAX_PORTS]; + unsigned int res_reserved; + unsigned int res_port_rsvd[MLX4_MAX_PORTS]; }; union { int res_free; From a97b9565338350d70d8d971c4ee6f0d4fa967418 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 15 Nov 2018 16:15:20 -0800 Subject: [PATCH 552/726] drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo Add missing semicolon. Fixes: 291d57f67d244973 ("qed: Fix rdma_info structure allocation") Cc: Michal Kalderon Cc: Denis Bolotin Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_rdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.h b/drivers/net/ethernet/qlogic/qed/qed_rdma.h index 50d609c0e108..3689fe3e5935 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.h +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.h @@ -183,7 +183,7 @@ void qed_rdma_info_free(struct qed_hwfn *p_hwfn); static inline void qed_rdma_dpm_conf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) {} static inline void qed_rdma_dpm_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) {} -static inline int qed_rdma_info_alloc(struct qed_hwfn *p_hwfn) {return -EINVAL} +static inline int qed_rdma_info_alloc(struct qed_hwfn *p_hwfn) {return -EINVAL;} static inline void qed_rdma_info_free(struct qed_hwfn *p_hwfn) {} #endif From 5c074eeabbd332b11559f7fc1e89d456f94801fb Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Wed, 14 Nov 2018 13:20:29 +0100 Subject: [PATCH 553/726] udmabuf: set read/write flag when exporting Otherwise, mmap fails when done with PROT_WRITE. Suggested-by: Gurchetan Singh Signed-off-by: Gerd Hoffmann Reviewed-by: Gurchetan Singh Tested-by: Gurchetan Singh Link: http://patchwork.freedesktop.org/patch/msgid/20181114122029.16766-1-kraxel@redhat.com --- drivers/dma-buf/udmabuf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c index 5b44ef226904..fc359ca4503d 100644 --- a/drivers/dma-buf/udmabuf.c +++ b/drivers/dma-buf/udmabuf.c @@ -184,6 +184,7 @@ static long udmabuf_create(const struct udmabuf_create_list *head, exp_info.ops = &udmabuf_ops; exp_info.size = ubuf->pagecount << PAGE_SHIFT; exp_info.priv = ubuf; + exp_info.flags = O_RDWR; buf = dma_buf_export(&exp_info); if (IS_ERR(buf)) { From d987f783a4808ce0636f58e2412addd453cba88c Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 7 Nov 2018 16:40:35 -0800 Subject: [PATCH 554/726] ath10k: don't assume 'vif' is non-NULL in flush() mac80211 may call us with vif == NULL, if the station is not currently active (e.g., not associated). It is trivially easy to reproduce a crash by suspending the system when not connected to an AP: [ 65.533934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [ 65.574521] pc : ath10k_flush+0x30/0xd0 [ath10k_core] [ 65.574538] lr : __ieee80211_flush_queues+0x180/0x244 [mac80211] [ 65.599680] Process kworker/u12:1 (pid: 57, stack limit = 0x(____ptrval____)) [ 65.599682] Call trace: [ 65.599695] ath10k_flush+0x30/0xd0 [ath10k_core] [ 65.642064] __ieee80211_flush_queues+0x180/0x244 [mac80211] [ 65.642079] ieee80211_flush_queues+0x34/0x40 [mac80211] [ 65.642095] __ieee80211_suspend+0xfc/0x47c [mac80211] [ 65.658611] ieee80211_suspend+0x30/0x3c [mac80211] [ 65.658627] wiphy_suspend+0x15c/0x3a8 [cfg80211] [ 65.672810] dpm_run_callback+0xf0/0x1f0 [ 65.672814] __device_suspend+0x3ac/0x4f8 [ 65.672819] async_suspend+0x34/0xbc [ 65.684096] async_run_entry_fn+0x54/0x104 [ 65.684099] worker_thread+0x4cc/0x72c [ 65.684102] kthread+0x134/0x13c [ 65.684105] ret_from_fork+0x10/0x18 Fixes: 9de4162f0999 ("ath10k: add peer flush in ath10k_flush for STATION") Signed-off-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index a1c2801ded10..7e49342bae38 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6867,7 +6867,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 bitmap; if (drop) { - if (vif->type == NL80211_IFTYPE_STATION) { + if (vif && vif->type == NL80211_IFTYPE_STATION) { bitmap = ~(1 << WMI_MGMT_TID); list_for_each_entry(arvif, &ar->arvifs, list) { if (arvif->vdev_type == WMI_VDEV_TYPE_STA) From d1fe6ad6f6bd61c84788d3a7b11e459a439c6169 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 8 Nov 2018 16:08:29 +0100 Subject: [PATCH 555/726] brcmfmac: fix reporting support for 160 MHz channels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver can report IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ so it's important to provide valid & complete info about supported bands for each channel. By default no support for 160 MHz should be assumed unless firmware reports it for a given channel later. This fixes info passed to the userspace. Without that change userspace could try to use invalid channel and fail to start an interface. Signed-off-by: Rafał Miłecki Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 230a378c26fc..7f0a5bade70a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -6005,7 +6005,8 @@ static int brcmf_construct_chaninfo(struct brcmf_cfg80211_info *cfg, * for subsequent chanspecs. */ channel->flags = IEEE80211_CHAN_NO_HT40 | - IEEE80211_CHAN_NO_80MHZ; + IEEE80211_CHAN_NO_80MHZ | + IEEE80211_CHAN_NO_160MHZ; ch.bw = BRCMU_CHAN_BW_20; cfg->d11inf.encchspec(&ch); chaninfo = ch.chspec; From 1770f0fa978ed691a454fa9d3ba903d5a70630cc Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 10 Nov 2018 12:03:09 +0100 Subject: [PATCH 556/726] mt76: fix uninitialized mutex access setting rts threshold Fix following crash due to a leftover uninitialized mutex access in mt76x2_set_rts_threshold routine. [ 31.018059] Call Trace: [ 31.018341] register_lock_class+0x51f/0x530 [ 31.018828] __lock_acquire+0x6c/0x1580 [ 31.019247] lock_acquire+0x88/0x120 [ 31.021089] __mutex_lock+0x4a/0x4f0 [ 31.023343] mt76x2_set_rts_threshold+0x28/0x50 [ 31.023831] ieee80211_set_wiphy_params+0x16d/0x4e0 [ 31.024344] nl80211_set_wiphy+0x72b/0xbc0 [ 31.024781] genl_family_rcv_msg+0x192/0x3a0 [ 31.025233] genl_rcv_msg+0x42/0x89 [ 31.026079] netlink_rcv_skb+0x38/0x100 [ 31.026475] genl_rcv+0x1f/0x30 [ 31.026804] netlink_unicast+0x19c/0x250 [ 31.027212] netlink_sendmsg+0x1ed/0x390 [ 31.027615] sock_sendmsg+0x31/0x40 [ 31.027973] ___sys_sendmsg+0x23c/0x280 [ 31.030414] __sys_sendmsg+0x42/0x80 [ 31.030783] do_syscall_64+0x4a/0x170 [ 31.031160] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 31.031677] RIP: 0033:0x7f3498b39ba7 [ 31.033953] RSP: 002b:00007fffe19675b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 31.034883] RAX: ffffffffffffffda RBX: 00000000012d5350 RCX: 00007f3498b39ba7 [ 31.035756] RDX: 0000000000000000 RSI: 00007fffe19675f0 RDI: 0000000000000003 [ 31.036587] RBP: 00000000012da740 R08: 0000000000000002 R09: 0000000000000000 [ 31.037422] R10: 0000000000000006 R11: 0000000000000246 R12: 00000000012da880 [ 31.038252] R13: 00007fffe19675f0 R14: 00007fffe19678c0 R15: 00000000012da880 Fixes: 108a4861ef19 ("mt76: create new mt76x02-lib module for common mt76x{0,2} code") Reported-by: lorenzo.trisolini@fluidmesh.com Reported-by: luca.bisti@fluidmesh.com Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt76/mt76x02.h | 1 - drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02.h b/drivers/net/wireless/mediatek/mt76/mt76x02.h index 47c42c607964..7806963b1905 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h @@ -71,7 +71,6 @@ struct mt76x02_dev { struct mac_address macaddr_list[8]; struct mutex phy_mutex; - struct mutex mutex; u8 txdone_seq; DECLARE_KFIFO_PTR(txstatus_fifo, struct mt76x02_tx_status); diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c index 034a06295668..3f001bd6806c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c @@ -272,9 +272,9 @@ mt76x2_set_rts_threshold(struct ieee80211_hw *hw, u32 val) if (val != ~0 && val > 0xffff) return -EINVAL; - mutex_lock(&dev->mutex); + mutex_lock(&dev->mt76.mutex); mt76x2_mac_set_tx_protection(dev, val); - mutex_unlock(&dev->mutex); + mutex_unlock(&dev->mt76.mutex); return 0; } From c26b5aa8ef0d46035060fded475e6ab957b9f69f Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Sun, 11 Nov 2018 11:15:21 +0000 Subject: [PATCH 557/726] gfs2: Fix iomap buffer head reference counting bug GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb32 ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Andreas Gruenbacher Signed-off-by: Linus Torvalds --- fs/gfs2/bmap.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 38d88fcb6988..0d643306c255 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -826,7 +826,7 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length, ret = gfs2_meta_inode_buffer(ip, &dibh); if (ret) goto unlock; - iomap->private = dibh; + mp->mp_bh[0] = dibh; if (gfs2_is_stuffed(ip)) { if (flags & IOMAP_WRITE) { @@ -863,9 +863,6 @@ unstuff: len = lblock_stop - lblock + 1; iomap->length = len << inode->i_blkbits; - get_bh(dibh); - mp->mp_bh[0] = dibh; - height = ip->i_height; while ((lblock + 1) * sdp->sd_sb.sb_bsize > sdp->sd_heightsize[height]) height++; @@ -898,8 +895,6 @@ out: iomap->bdev = inode->i_sb->s_bdev; unlock: up_read(&ip->i_rw_mutex); - if (ret && dibh) - brelse(dibh); return ret; do_alloc: @@ -980,9 +975,9 @@ static void gfs2_iomap_journaled_page_done(struct inode *inode, loff_t pos, static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, loff_t length, unsigned flags, - struct iomap *iomap) + struct iomap *iomap, + struct metapath *mp) { - struct metapath mp = { .mp_aheight = 1, }; struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); unsigned int data_blocks = 0, ind_blocks = 0, rblocks; @@ -996,9 +991,9 @@ static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, unstuff = gfs2_is_stuffed(ip) && pos + length > gfs2_max_stuffed_size(ip); - ret = gfs2_iomap_get(inode, pos, length, flags, iomap, &mp); + ret = gfs2_iomap_get(inode, pos, length, flags, iomap, mp); if (ret) - goto out_release; + goto out_unlock; alloc_required = unstuff || iomap->type == IOMAP_HOLE; @@ -1013,7 +1008,7 @@ static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, ret = gfs2_quota_lock_check(ip, &ap); if (ret) - goto out_release; + goto out_unlock; ret = gfs2_inplace_reserve(ip, &ap); if (ret) @@ -1038,17 +1033,15 @@ static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, ret = gfs2_unstuff_dinode(ip, NULL); if (ret) goto out_trans_end; - release_metapath(&mp); - brelse(iomap->private); - iomap->private = NULL; + release_metapath(mp); ret = gfs2_iomap_get(inode, iomap->offset, iomap->length, - flags, iomap, &mp); + flags, iomap, mp); if (ret) goto out_trans_end; } if (iomap->type == IOMAP_HOLE) { - ret = gfs2_iomap_alloc(inode, iomap, flags, &mp); + ret = gfs2_iomap_alloc(inode, iomap, flags, mp); if (ret) { gfs2_trans_end(sdp); gfs2_inplace_release(ip); @@ -1056,7 +1049,6 @@ static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, goto out_qunlock; } } - release_metapath(&mp); if (gfs2_is_jdata(ip)) iomap->page_done = gfs2_iomap_journaled_page_done; return 0; @@ -1069,10 +1061,7 @@ out_trans_fail: out_qunlock: if (alloc_required) gfs2_quota_unlock(ip); -out_release: - if (iomap->private) - brelse(iomap->private); - release_metapath(&mp); +out_unlock: gfs2_write_unlock(inode); return ret; } @@ -1088,10 +1077,10 @@ static int gfs2_iomap_begin(struct inode *inode, loff_t pos, loff_t length, trace_gfs2_iomap_start(ip, pos, length, flags); if ((flags & IOMAP_WRITE) && !(flags & IOMAP_DIRECT)) { - ret = gfs2_iomap_begin_write(inode, pos, length, flags, iomap); + ret = gfs2_iomap_begin_write(inode, pos, length, flags, iomap, &mp); } else { ret = gfs2_iomap_get(inode, pos, length, flags, iomap, &mp); - release_metapath(&mp); + /* * Silently fall back to buffered I/O for stuffed files or if * we've hot a hole (see gfs2_file_direct_write). @@ -1100,6 +1089,11 @@ static int gfs2_iomap_begin(struct inode *inode, loff_t pos, loff_t length, iomap->type != IOMAP_MAPPED) ret = -ENOTBLK; } + if (!ret) { + get_bh(mp.mp_bh[0]); + iomap->private = mp.mp_bh[0]; + } + release_metapath(&mp); trace_gfs2_iomap_end(ip, iomap, ret); return ret; } From 44a4a66b619a0a83a52e707ebcd80182207bd50e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 10:53:09 -0500 Subject: [PATCH 558/726] XArray: Correct xa_store_range The explicit '64' should have been BITS_PER_LONG, but while looking at this code I realised I meant to use __ffs(), not ilog2(). Signed-off-by: Matthew Wilcox --- lib/xarray.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/lib/xarray.c b/lib/xarray.c index 7946380cd6c9..bbacca576593 100644 --- a/lib/xarray.c +++ b/lib/xarray.c @@ -1565,8 +1565,9 @@ void *xa_store_range(struct xarray *xa, unsigned long first, do { xas_lock(&xas); if (entry) { - unsigned int order = (last == ~0UL) ? 64 : - ilog2(last + 1); + unsigned int order = BITS_PER_LONG; + if (last + 1) + order = __ffs(last + 1); xas_set_order(&xas, last, order); xas_create(&xas); if (xas_error(&xas)) From 5404a7f1c21cfda061712bedf2d06cc0f6c755e9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 5 Nov 2018 09:34:04 -0500 Subject: [PATCH 559/726] XArray tests: Correct some 64-bit assumptions The test-suite caught these two mistakes when compiled for 32-bit. I had only been running the test-suite in 64-bit mode. Signed-off-by: Matthew Wilcox --- lib/test_xarray.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/test_xarray.c b/lib/test_xarray.c index e5294b20b52f..5f9c14e975a4 100644 --- a/lib/test_xarray.c +++ b/lib/test_xarray.c @@ -504,7 +504,7 @@ static noinline void check_multi_store(struct xarray *xa) rcu_read_unlock(); /* We can erase multiple values with a single store */ - xa_store_order(xa, 0, 63, NULL, GFP_KERNEL); + xa_store_order(xa, 0, BITS_PER_LONG - 1, NULL, GFP_KERNEL); XA_BUG_ON(xa, !xa_empty(xa)); /* Even when the first slot is empty but the others aren't */ @@ -1101,7 +1101,7 @@ static noinline void check_store_range(struct xarray *xa) __check_store_range(xa, 4095 + i, 4095 + j); __check_store_range(xa, 4096 + i, 4096 + j); __check_store_range(xa, 123456 + i, 123456 + j); - __check_store_range(xa, UINT_MAX + i, UINT_MAX + j); + __check_store_range(xa, (1 << 24) + i, (1 << 24) + j); } } } From 6d7cd8c1373746a93dc868ee9d38a82df78b38aa Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 6 Nov 2018 13:11:57 -0500 Subject: [PATCH 560/726] dax: Remove optimisation from dax_lock_mapping_entry Skipping some of the revalidation after we sleep can lead to returning a mapping which has already been freed. Just drop this optimisation. Reported-by: Dan Williams Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Signed-off-by: Matthew Wilcox --- fs/dax.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index 616e36ea6aaa..529ac9d7c10a 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -383,11 +383,8 @@ bool dax_lock_mapping_entry(struct page *page) entry = xas_load(&xas); if (dax_is_locked(entry)) { entry = get_unlocked_entry(&xas); - /* Did the page move while we slept? */ - if (dax_to_pfn(entry) != page_to_pfn(page)) { - xas_unlock_irq(&xas); - continue; - } + xas_unlock_irq(&xas); + continue; } dax_lock_entry(&xas, entry); xas_unlock_irq(&xas); From 7ae2ea7dc45e8250a74cfaaecdce578427669ae5 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 9 Nov 2018 20:09:37 -0500 Subject: [PATCH 561/726] dax: Make sure the unlocking entry isn't locked I wrote the semantics in the commit message, but didn't document it in the source code. Use a BUG_ON instead (if any code does do this, it's really buggy; we can't recover and it's worth taking the machine down). Signed-off-by: Matthew Wilcox --- fs/dax.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/dax.c b/fs/dax.c index 529ac9d7c10a..7944417f5a71 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -255,6 +255,7 @@ static void dax_unlock_entry(struct xa_state *xas, void *entry) { void *old; + BUG_ON(dax_is_locked(entry)); xas_reset(xas); xas_lock_irq(xas); old = xas_store(xas, entry); From c5bbd4515a05f8acb7e6ab6297044a529762cbf5 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Nov 2018 14:37:06 -0500 Subject: [PATCH 562/726] dax: Reinstate RCU protection of inode For the device-dax case, it is possible that the inode can go away underneath us. The rcu_read_lock() was there to prevent it from being freed, and not (as I thought) to protect the tree. Bring back the rcu_read_lock() protection. Also add a little kernel-doc; while this function is not exported to modules, it is used from outside dax.c Reported-by: Dan Williams Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Signed-off-by: Matthew Wilcox --- fs/dax.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index 7944417f5a71..ce87d21b3805 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -353,16 +353,27 @@ static struct page *dax_busy_page(void *entry) return NULL; } +/* + * dax_lock_mapping_entry - Lock the DAX entry corresponding to a page + * @page: The page whose entry we want to lock + * + * Context: Process context. + * Return: %true if the entry was locked or does not need to be locked. + */ bool dax_lock_mapping_entry(struct page *page) { XA_STATE(xas, NULL, 0); void *entry; + bool locked; + /* Ensure page->mapping isn't freed while we look at it */ + rcu_read_lock(); for (;;) { struct address_space *mapping = READ_ONCE(page->mapping); + locked = false; if (!dax_mapping(mapping)) - return false; + break; /* * In the device-dax case there's no need to lock, a @@ -371,8 +382,9 @@ bool dax_lock_mapping_entry(struct page *page) * otherwise we would not have a valid pfn_to_page() * translation. */ + locked = true; if (S_ISCHR(mapping->host->i_mode)) - return true; + break; xas.xa = &mapping->i_pages; xas_lock_irq(&xas); @@ -383,14 +395,18 @@ bool dax_lock_mapping_entry(struct page *page) xas_set(&xas, page->index); entry = xas_load(&xas); if (dax_is_locked(entry)) { + rcu_read_unlock(); entry = get_unlocked_entry(&xas); xas_unlock_irq(&xas); + rcu_read_lock(); continue; } dax_lock_entry(&xas, entry); xas_unlock_irq(&xas); - return true; + break; } + rcu_read_unlock(); + return locked; } void dax_unlock_mapping_entry(struct page *page) From 70cdb6ad6dc342d9643a00c9092e88f0075f2b9a Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 15 Nov 2018 18:16:38 +0100 Subject: [PATCH 563/726] gpio: pxa: fix legacy non pinctrl aware builds again As pointed out by Gregor, spitz keyboard matrix is broken, with or without CONFIG_PINCTRL set, quoting : "The gpio matrix keypard on the Zaurus C3x00 (see spitz.c) does not work properly. Noticeable are that rshift+c does nothing where as lshift+c creates C. Opposite it is for rshift+a vs lshift+a, here only rshift works. This affects a few other combinations using the rshift or lshift buttons." As a matter of fact, as for platform_data based builds CONFIG_PINCTRL=n is required for now (as opposed for devicetree builds where it should be set), this means gpio driver should change the direction, which is what was attempted by commit c4e5ffb6f224 ("gpio: pxa: fix legacy non pinctrl aware builds"). Unfortunately, the input case was inverted, and the direction change was never done. This wasn't seen up until now because the initial platform setup (MFP) was setting this direction. Yet in Gregory's case, the matrix-keypad driver changes back and forth the direction dynamically, and this is why he's the first to report it. Fixes: c4e5ffb6f224 ("gpio: pxa: fix legacy non pinctrl aware builds") Tested-by: Greg Signed-off-by: Robert Jarzmik Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pxa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index bfe4c5c9f41c..e9600b556f39 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -268,8 +268,8 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) if (pxa_gpio_has_pinctrl()) { ret = pinctrl_gpio_direction_input(chip->base + offset); - if (!ret) - return 0; + if (ret) + return ret; } spin_lock_irqsave(&gpio_lock, flags); From bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 8 Nov 2018 17:52:53 +0100 Subject: [PATCH 564/726] gpio: mockup: fix indicated direction Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") fixed an existing issue but broke libgpiod tests by changing the default direction of dummy lines to output. We don't break user-space so make gpio-mockup behave as before. Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mockup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 8269cffc2967..6a50f9f59c90 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -35,8 +35,8 @@ #define gpio_mockup_err(...) pr_err(GPIO_MOCKUP_NAME ": " __VA_ARGS__) enum { - GPIO_MOCKUP_DIR_OUT = 0, - GPIO_MOCKUP_DIR_IN = 1, + GPIO_MOCKUP_DIR_IN = 0, + GPIO_MOCKUP_DIR_OUT = 1, }; /* @@ -131,7 +131,7 @@ static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset) { struct gpio_mockup_chip *chip = gpiochip_get_data(gc); - return chip->lines[offset].dir; + return !chip->lines[offset].dir; } static int gpio_mockup_to_irq(struct gpio_chip *gc, unsigned int offset) From 10547d956d590fbb846a7bd053a1dfc30e8f9a68 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 9 Nov 2018 17:40:16 +0200 Subject: [PATCH 565/726] MAINTAINERS: Do maintain Intel GPIO drivers via separate tree We would like to consolidate Intel pure GPIO drivers, including PMICs and some old x86 platforms, in one tree which is maintained by Intel. Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij --- MAINTAINERS | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e1bacf0f8b08..1602421a5fd6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7430,6 +7430,20 @@ S: Maintained F: Documentation/fb/intelfb.txt F: drivers/video/fbdev/intelfb/ +INTEL GPIO DRIVERS +M: Andy Shevchenko +L: linux-gpio@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git +F: drivers/gpio/gpio-ich.c +F: drivers/gpio/gpio-intel-mid.c +F: drivers/gpio/gpio-lynxpoint.c +F: drivers/gpio/gpio-merrifield.c +F: drivers/gpio/gpio-ml-ioh.c +F: drivers/gpio/gpio-pch.c +F: drivers/gpio/gpio-sch.c +F: drivers/gpio/gpio-sodaville.c + INTEL GVT-g DRIVERS (Intel GPU Virtualization) M: Zhenyu Wang M: Zhi Wang @@ -7440,12 +7454,6 @@ T: git https://github.com/intel/gvt-linux.git S: Supported F: drivers/gpu/drm/i915/gvt/ -INTEL PMIC GPIO DRIVER -R: Andy Shevchenko -S: Maintained -F: drivers/gpio/gpio-*cove.c -F: drivers/gpio/gpio-msic.c - INTEL HID EVENT DRIVER M: Alex Hung L: platform-driver-x86@vger.kernel.org @@ -7533,12 +7541,6 @@ W: https://01.org/linux-acpi S: Supported F: drivers/platform/x86/intel_menlow.c -INTEL MERRIFIELD GPIO DRIVER -M: Andy Shevchenko -L: linux-gpio@vger.kernel.org -S: Maintained -F: drivers/gpio/gpio-merrifield.c - INTEL MIC DRIVERS (mic) M: Sudeep Dutt M: Ashutosh Dixit @@ -7571,6 +7573,13 @@ F: drivers/platform/x86/intel_punit_ipc.c F: arch/x86/include/asm/intel_pmc_ipc.h F: arch/x86/include/asm/intel_punit_ipc.h +INTEL PMIC GPIO DRIVERS +M: Andy Shevchenko +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git +F: drivers/gpio/gpio-*cove.c +F: drivers/gpio/gpio-msic.c + INTEL MULTIFUNCTION PMIC DEVICE DRIVERS R: Andy Shevchenko S: Maintained From 83e65df6dfece9eb588735459428f221eb930c0c Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Fri, 9 Nov 2018 09:17:33 +0100 Subject: [PATCH 566/726] net: mvneta: Don't advertise 2.5G modes Using 2.5G speed relies on the SerDes lanes being configured accordingly. The lanes have to be reconfigured to switch between 1G and 2.5G, and for now only the bootloader does this configuration. In the case we add a Comphy driver to handle switching the lanes dynamically, it's better for now to stick with supporting only 1G and add advertisement for 2.5G once we really are capable of handling both speeds without problem. Since the interface mode is initialy taken from the DT, we want to make sure that adding comphy support won't break boards that don't update their dtb. Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII") Reported-by: Andrew Lunn Reported-by: Russell King Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 3ba672e9e353..e5397c8197b9 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3343,7 +3343,6 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported, if (state->interface != PHY_INTERFACE_MODE_NA && state->interface != PHY_INTERFACE_MODE_QSGMII && state->interface != PHY_INTERFACE_MODE_SGMII && - state->interface != PHY_INTERFACE_MODE_2500BASEX && !phy_interface_mode_is_8023z(state->interface) && !phy_interface_mode_is_rgmii(state->interface)) { bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); @@ -3357,14 +3356,9 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported, /* Asymmetric pause is unsupported */ phylink_set(mask, Pause); - /* We cannot use 1Gbps when using the 2.5G interface. */ - if (state->interface == PHY_INTERFACE_MODE_2500BASEX) { - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - } else { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - } + /* Half-duplex at speeds higher than 100Mbit is unsupported */ + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseX_Full); if (!phy_interface_mode_is_8023z(state->interface)) { /* 10M and 100M are only supported in non-802.3z mode */ From 761f60261b4401aa368d71d431b4c218af0efcee Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 14 Nov 2018 00:48:28 +0800 Subject: [PATCH 567/726] ipv6: fix a dst leak when removing its exception These is no need to hold dst before calling rt6_remove_exception_rt(). The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(), which has been removed in Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"). Otherwise, it will cause a dst leak. This patch is to simply remove the dst_hold_safe() call before calling rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt(). It's safe, because the removal of the exception that holds its dst's refcnt is protected by rt6_exception_lock. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling") Reported-by: Li Shuang Signed-off-by: Xin Long Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 2a7423c39456..14b422f35504 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2232,8 +2232,7 @@ static void ip6_link_failure(struct sk_buff *skb) if (rt) { rcu_read_lock(); if (rt->rt6i_flags & RTF_CACHE) { - if (dst_hold_safe(&rt->dst)) - rt6_remove_exception_rt(rt); + rt6_remove_exception_rt(rt); } else { struct fib6_info *from; struct fib6_node *fn; @@ -3214,8 +3213,8 @@ static int ip6_del_cached_rt(struct rt6_info *rt, struct fib6_config *cfg) if (cfg->fc_flags & RTF_GATEWAY && !ipv6_addr_equal(&cfg->fc_gateway, &rt->rt6i_gateway)) goto out; - if (dst_hold_safe(&rt->dst)) - rc = rt6_remove_exception_rt(rt); + + rc = rt6_remove_exception_rt(rt); out: return rc; } From 06bc4d0079ab6a2de86f56703ce1bd13e90b9d9d Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 13 Nov 2018 18:42:24 +0100 Subject: [PATCH 568/726] net: lantiq: Fix returned value in case of error in 'xrx200_probe()' Return 'err' in the error handling path instead of 0. Return explicitly 0 in the normal path, instead of 'err', which is known to be 0 at this point. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/lantiq_xrx200.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c index 8c5ba4b81fb7..2d4d10a017e5 100644 --- a/drivers/net/ethernet/lantiq_xrx200.c +++ b/drivers/net/ethernet/lantiq_xrx200.c @@ -512,7 +512,8 @@ static int xrx200_probe(struct platform_device *pdev) err = register_netdev(net_dev); if (err) goto err_unprepare_clk; - return err; + + return 0; err_unprepare_clk: clk_disable_unprepare(priv->clk); @@ -520,7 +521,7 @@ err_unprepare_clk: err_uninit_dma: xrx200_hw_cleanup(priv); - return 0; + return err; } static int xrx200_remove(struct platform_device *pdev) From 19ab69107d3ecfb7cd3e38ad262a881be40c01a3 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Wed, 14 Nov 2018 12:17:25 +0100 Subject: [PATCH 569/726] net/sched: act_pedit: fix memory leak when IDR allocation fails tcf_idr_check_alloc() can return a negative value, on allocation failures (-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases. Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Signed-off-by: Davide Caratti Acked-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/act_pedit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index da3dd0f68cc2..2b372a06b432 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -201,7 +201,8 @@ static int tcf_pedit_init(struct net *net, struct nlattr *nla, goto out_release; } } else { - return err; + ret = err; + goto out_free; } p = to_pedit(*a); From dfa0d55ff6be64e7b6881212a291cb95f8da3b08 Mon Sep 17 00:00:00 2001 From: Martin Schiller Date: Wed, 14 Nov 2018 12:54:49 +0100 Subject: [PATCH 570/726] net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs This commit re-enables support for slow GPIO pins. It was initially introduced by commit 2d6c9091ab76 ("net: mdio-gpio: support access that may sleep") and got lost by commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible"). Also add a warning about slow GPIO pins like it is done in i2c-gpio. Signed-off-by: Martin Schiller Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 33265747bf39..3a5a24daf384 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -63,7 +63,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) * assume the pin serves as pull-up. If direction is * output, the default value is high. */ - gpiod_set_value(bitbang->mdo, 1); + gpiod_set_value_cansleep(bitbang->mdo, 1); return; } @@ -78,7 +78,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - return gpiod_get_value(bitbang->mdio); + return gpiod_get_value_cansleep(bitbang->mdio); } static void mdio_set(struct mdiobb_ctrl *ctrl, int what) @@ -87,9 +87,9 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) container_of(ctrl, struct mdio_gpio_info, ctrl); if (bitbang->mdo) - gpiod_set_value(bitbang->mdo, what); + gpiod_set_value_cansleep(bitbang->mdo, what); else - gpiod_set_value(bitbang->mdio, what); + gpiod_set_value_cansleep(bitbang->mdio, what); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -97,7 +97,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpiod_set_value(bitbang->mdc, what); + gpiod_set_value_cansleep(bitbang->mdc, what); } static const struct mdiobb_ops mdio_gpio_ops = { @@ -162,6 +162,10 @@ static int mdio_gpio_probe(struct platform_device *pdev) if (ret) return ret; + if (gpiod_cansleep(bitbang->mdc) || gpiod_cansleep(bitbang->mdio) || + gpiod_cansleep(bitbang->mdo)) + dev_warn(&pdev->dev, "Slow GPIO pins might wreak havoc into MDIO bus timing"); + if (pdev->dev.of_node) { bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); if (bus_id < 0) { From 160396a722e0c4dfd462f3eec779251bf944f438 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 16 Nov 2018 23:04:37 -0800 Subject: [PATCH 571/726] Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" This reverts commit dfa0d55ff6be64e7b6881212a291cb95f8da3b08. Discussion still ongoing, I shouldn't have applied this. Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 3a5a24daf384..33265747bf39 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -63,7 +63,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) * assume the pin serves as pull-up. If direction is * output, the default value is high. */ - gpiod_set_value_cansleep(bitbang->mdo, 1); + gpiod_set_value(bitbang->mdo, 1); return; } @@ -78,7 +78,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - return gpiod_get_value_cansleep(bitbang->mdio); + return gpiod_get_value(bitbang->mdio); } static void mdio_set(struct mdiobb_ctrl *ctrl, int what) @@ -87,9 +87,9 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) container_of(ctrl, struct mdio_gpio_info, ctrl); if (bitbang->mdo) - gpiod_set_value_cansleep(bitbang->mdo, what); + gpiod_set_value(bitbang->mdo, what); else - gpiod_set_value_cansleep(bitbang->mdio, what); + gpiod_set_value(bitbang->mdio, what); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -97,7 +97,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpiod_set_value_cansleep(bitbang->mdc, what); + gpiod_set_value(bitbang->mdc, what); } static const struct mdiobb_ops mdio_gpio_ops = { @@ -162,10 +162,6 @@ static int mdio_gpio_probe(struct platform_device *pdev) if (ret) return ret; - if (gpiod_cansleep(bitbang->mdc) || gpiod_cansleep(bitbang->mdio) || - gpiod_cansleep(bitbang->mdo)) - dev_warn(&pdev->dev, "Slow GPIO pins might wreak havoc into MDIO bus timing"); - if (pdev->dev.of_node) { bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); if (bus_id < 0) { From fda490d39fc0668d92e170d95c11e35a010019aa Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Nov 2018 15:07:31 -0500 Subject: [PATCH 572/726] dax: Fix dax_unlock_mapping_entry for PMD pages Device DAX PMD pages do not set the PageHead bit for compound pages. Fix for now by retrieving the PMD bit from the entry, but eventually we will be passed the page size by the caller. Reported-by: Dan Williams Fixes: 9f32d221301c ("dax: Convert dax_lock_mapping_entry to XArray") Signed-off-by: Matthew Wilcox --- fs/dax.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index ce87d21b3805..5426252375f6 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -98,12 +98,6 @@ static void *dax_make_entry(pfn_t pfn, unsigned long flags) return xa_mk_value(flags | (pfn_t_to_pfn(pfn) << DAX_SHIFT)); } -static void *dax_make_page_entry(struct page *page) -{ - pfn_t pfn = page_to_pfn_t(page); - return dax_make_entry(pfn, PageHead(page) ? DAX_PMD : 0); -} - static bool dax_is_locked(void *entry) { return xa_to_value(entry) & DAX_LOCKED; @@ -116,12 +110,12 @@ static unsigned int dax_entry_order(void *entry) return 0; } -static int dax_is_pmd_entry(void *entry) +static unsigned long dax_is_pmd_entry(void *entry) { return xa_to_value(entry) & DAX_PMD; } -static int dax_is_pte_entry(void *entry) +static bool dax_is_pte_entry(void *entry) { return !(xa_to_value(entry) & DAX_PMD); } @@ -413,11 +407,16 @@ void dax_unlock_mapping_entry(struct page *page) { struct address_space *mapping = page->mapping; XA_STATE(xas, &mapping->i_pages, page->index); + void *entry; if (S_ISCHR(mapping->host->i_mode)) return; - dax_unlock_entry(&xas, dax_make_page_entry(page)); + rcu_read_lock(); + entry = xas_load(&xas); + rcu_read_unlock(); + entry = dax_make_entry(page_to_pfn_t(page), dax_is_pmd_entry(entry)); + dax_unlock_entry(&xas, entry); } /* From 0e40de0338d005f73d46898a21544cd26f01b4ce Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Nov 2018 15:19:13 -0500 Subject: [PATCH 573/726] dax: Fix huge page faults Using xas_load() with a PMD-sized xa_state would work if either a PMD-sized entry was present or a PTE sized entry was present in the first 64 entries (of the 512 PTEs in a PMD on x86). If there was no PTE in the first 64 entries, grab_mapping_entry() would believe there were no entries present, allocate a PMD-sized entry and overwrite the PTE in the page cache. Use xas_find_conflict() instead which turns out to simplify both get_unlocked_entry() and grab_mapping_entry(). Also remove a WARN_ON_ONCE from grab_mapping_entry() as it will have already triggered in get_unlocked_entry(). Fixes: cfc93c6c6c96 ("dax: Convert dax_insert_pfn_mkwrite to XArray") Signed-off-by: Matthew Wilcox --- fs/dax.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index 5426252375f6..cf2394e2bf4b 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -216,9 +216,8 @@ static void *get_unlocked_entry(struct xa_state *xas) ewait.wait.func = wake_exceptional_entry_func; for (;;) { - entry = xas_load(xas); - if (!entry || xa_is_internal(entry) || - WARN_ON_ONCE(!xa_is_value(entry)) || + entry = xas_find_conflict(xas); + if (!entry || WARN_ON_ONCE(!xa_is_value(entry)) || !dax_is_locked(entry)) return entry; @@ -458,11 +457,9 @@ static void *grab_mapping_entry(struct xa_state *xas, retry: xas_lock_irq(xas); entry = get_unlocked_entry(xas); - if (xa_is_internal(entry)) - goto fallback; if (entry) { - if (WARN_ON_ONCE(!xa_is_value(entry))) { + if (!xa_is_value(entry)) { xas_set_err(xas, EIO); goto out_unlock; } @@ -1641,8 +1638,7 @@ dax_insert_pfn_mkwrite(struct vm_fault *vmf, pfn_t pfn, unsigned int order) /* Did we race with someone splitting entry or so? */ if (!entry || (order == 0 && !dax_is_pte_entry(entry)) || - (order == PMD_ORDER && (xa_is_internal(entry) || - !dax_is_pmd_entry(entry)))) { + (order == PMD_ORDER && !dax_is_pmd_entry(entry))) { put_unlocked_entry(&xas, entry); xas_unlock_irq(&xas); trace_dax_insert_pfn_mkwrite_no_entry(mapping->host, vmf, From df5a8ec64eed7fe45b556cfff503acd6429ab817 Mon Sep 17 00:00:00 2001 From: Martin Schiller Date: Fri, 16 Nov 2018 08:38:36 +0100 Subject: [PATCH 574/726] net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Up until commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible"), the _cansleep variants of the gpio_ API was used. After that commit and the change to gpiod_ API, the _cansleep() was dropped. This then results in WARN_ON() when used with GPIO devices which do sleep. Add back the _cansleep() to avoid this. Fixes: 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible") Signed-off-by: Martin Schiller Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 33265747bf39..0fbcedcdf6e2 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -63,7 +63,7 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) * assume the pin serves as pull-up. If direction is * output, the default value is high. */ - gpiod_set_value(bitbang->mdo, 1); + gpiod_set_value_cansleep(bitbang->mdo, 1); return; } @@ -78,7 +78,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - return gpiod_get_value(bitbang->mdio); + return gpiod_get_value_cansleep(bitbang->mdio); } static void mdio_set(struct mdiobb_ctrl *ctrl, int what) @@ -87,9 +87,9 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what) container_of(ctrl, struct mdio_gpio_info, ctrl); if (bitbang->mdo) - gpiod_set_value(bitbang->mdo, what); + gpiod_set_value_cansleep(bitbang->mdo, what); else - gpiod_set_value(bitbang->mdio, what); + gpiod_set_value_cansleep(bitbang->mdio, what); } static void mdc_set(struct mdiobb_ctrl *ctrl, int what) @@ -97,7 +97,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what) struct mdio_gpio_info *bitbang = container_of(ctrl, struct mdio_gpio_info, ctrl); - gpiod_set_value(bitbang->mdc, what); + gpiod_set_value_cansleep(bitbang->mdc, what); } static const struct mdiobb_ops mdio_gpio_ops = { From 95506588d2c1d72ca29adef8ae9bf771bcfb4ced Mon Sep 17 00:00:00 2001 From: Slavomir Kaslev Date: Fri, 16 Nov 2018 11:27:53 +0200 Subject: [PATCH 575/726] socket: do a generic_file_splice_read when proto_ops has no splice_read splice(2) fails with -EINVAL when called reading on a socket with no splice_read set in its proto_ops (such as vsock sockets). Switch this to fallbacks to a generic_file_splice_read instead. Signed-off-by: Slavomir Kaslev Signed-off-by: David S. Miller --- net/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/socket.c b/net/socket.c index 593826e11a53..334fcc617ef2 100644 --- a/net/socket.c +++ b/net/socket.c @@ -853,7 +853,7 @@ static ssize_t sock_splice_read(struct file *file, loff_t *ppos, struct socket *sock = file->private_data; if (unlikely(!sock->ops->splice_read)) - return -EINVAL; + return generic_file_splice_read(file, ppos, pipe, len, flags); return sock->ops->splice_read(sock, ppos, pipe, len, flags); } From 9d332e69c1dc74dcd748de7cbd2dac5c61bda265 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 16 Nov 2018 18:50:01 +0200 Subject: [PATCH 576/726] net: bridge: fix vlan stats use-after-free on destruction Syzbot reported a use-after-free of the global vlan context on port vlan destruction. When I added per-port vlan stats I missed the fact that the global vlan context can be freed before the per-port vlan rcu callback. There're a few different ways to deal with this, I've chosen to add a new private flag that is set only when per-port stats are allocated so we can directly check it on destruction without dereferencing the global context at all. The new field in net_bridge_vlan uses a hole. v2: cosmetic change, move the check to br_process_vlan_info where the other checks are done v3: add change log in the patch, add private (in-kernel only) flags in a hole in net_bridge_vlan struct and use that instead of mixing user-space flags with private flags Fixes: 9163a0fc1f0c ("net: bridge: add support for per-port vlan stats") Reported-by: syzbot+04681da557a0e49a52e5@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_private.h | 7 +++++++ net/bridge/br_vlan.c | 3 ++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 2920e06a5403..04c19a37e500 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -102,12 +102,18 @@ struct br_tunnel_info { struct metadata_dst *tunnel_dst; }; +/* private vlan flags */ +enum { + BR_VLFLAG_PER_PORT_STATS = BIT(0), +}; + /** * struct net_bridge_vlan - per-vlan entry * * @vnode: rhashtable member * @vid: VLAN id * @flags: bridge vlan flags + * @priv_flags: private (in-kernel) bridge vlan flags * @stats: per-cpu VLAN statistics * @br: if MASTER flag set, this points to a bridge struct * @port: if MASTER flag unset, this points to a port struct @@ -127,6 +133,7 @@ struct net_bridge_vlan { struct rhash_head tnode; u16 vid; u16 flags; + u16 priv_flags; struct br_vlan_stats __percpu *stats; union { struct net_bridge *br; diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 8c9297a01947..e84be08b8285 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -197,7 +197,7 @@ static void nbp_vlan_rcu_free(struct rcu_head *rcu) v = container_of(rcu, struct net_bridge_vlan, rcu); WARN_ON(br_vlan_is_master(v)); /* if we had per-port stats configured then free them here */ - if (v->brvlan->stats != v->stats) + if (v->priv_flags & BR_VLFLAG_PER_PORT_STATS) free_percpu(v->stats); v->stats = NULL; kfree(v); @@ -264,6 +264,7 @@ static int __vlan_add(struct net_bridge_vlan *v, u16 flags) err = -ENOMEM; goto out_filt; } + v->priv_flags |= BR_VLFLAG_PER_PORT_STATS; } else { v->stats = masterv->stats; } From 8840c3e2344a456267d7989b97d097e798b28b0b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= Date: Fri, 16 Nov 2018 12:13:59 -0800 Subject: [PATCH 577/726] MAINTAINERS: Add entry for CAKE qdisc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We would like the existing community to be kept in the loop for any new developments on CAKE; and I certainly plan to keep maintaining it. Reflect this in MAINTAINERS. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5a4bd37d9d02..99f2956be87b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3276,6 +3276,12 @@ F: include/uapi/linux/caif/ F: include/net/caif/ F: net/caif/ +CAKE QDISC +M: Toke Høiland-Jørgensen +L: cake@lists.bufferbloat.net (moderated for non-subscribers) +S: Maintained +F: net/sched/sch_cake.c + CALGARY x86-64 IOMMU M: Muli Ben-Yehuda M: Jon Mason From 16f7eb2b77b55da816c4e207f3f9440a8cafc00a Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 16 Nov 2018 16:58:19 +0100 Subject: [PATCH 578/726] ip_tunnel: don't force DF when MTU is locked The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index dde671e97829..c248e0dccbe1 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -80,7 +80,7 @@ void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, iph->version = 4; iph->ihl = sizeof(struct iphdr) >> 2; - iph->frag_off = df; + iph->frag_off = ip_mtu_locked(&rt->dst) ? 0 : df; iph->protocol = proto; iph->tos = tos; iph->daddr = dst; From 5aaf6428526bcad98d6f51f2f679c919bb75d7e9 Mon Sep 17 00:00:00 2001 From: Lucas Bates Date: Fri, 16 Nov 2018 17:37:55 -0500 Subject: [PATCH 579/726] tc-testing: tdc.py: ignore errors when decoding stdout/stderr Prevent exceptions from being raised while decoding output from an executed command. There is no impact on tdc's execution and the verify command phase would fail the pattern match. Signed-off-by: Lucas Bates Signed-off-by: David S. Miller --- tools/testing/selftests/tc-testing/tdc.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py index 87a04a8a5945..9b3f414ff1e9 100755 --- a/tools/testing/selftests/tc-testing/tdc.py +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -134,9 +134,9 @@ def exec_cmd(args, pm, stage, command): (rawout, serr) = proc.communicate() if proc.returncode != 0 and len(serr) > 0: - foutput = serr.decode("utf-8") + foutput = serr.decode("utf-8", errors="ignore") else: - foutput = rawout.decode("utf-8") + foutput = rawout.decode("utf-8", errors="ignore") proc.stdout.close() proc.stderr.close() From c6cecf4ae44e4ce9158ef8806358142c3512cd33 Mon Sep 17 00:00:00 2001 From: "Brenda J. Butler" Date: Fri, 16 Nov 2018 17:37:56 -0500 Subject: [PATCH 580/726] tc-testing: tdc.py: Guard against lack of returncode in executed command Add some defensive coding in case one of the subprocesses created by tdc returns nothing. If no object is returned from exec_cmd, then tdc will halt with an unhandled exception. Signed-off-by: Brenda J. Butler Signed-off-by: Lucas Bates Signed-off-by: David S. Miller --- tools/testing/selftests/tc-testing/tdc.py | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py index 9b3f414ff1e9..7607ba3e3cbe 100755 --- a/tools/testing/selftests/tc-testing/tdc.py +++ b/tools/testing/selftests/tc-testing/tdc.py @@ -169,6 +169,8 @@ def prepare_env(args, pm, stage, prefix, cmdlist, output = None): file=sys.stderr) print("\n{} *** Error message: \"{}\"".format(prefix, foutput), file=sys.stderr) + print("returncode {}; expected {}".format(proc.returncode, + exit_codes)) print("\n{} *** Aborting test run.".format(prefix), file=sys.stderr) print("\n\n{} *** stdout ***".format(proc.stdout), file=sys.stderr) print("\n\n{} *** stderr ***".format(proc.stderr), file=sys.stderr) @@ -195,12 +197,18 @@ def run_one_test(pm, args, index, tidx): print('-----> execute stage') pm.call_pre_execute() (p, procout) = exec_cmd(args, pm, 'execute', tidx["cmdUnderTest"]) - exit_code = p.returncode + if p: + exit_code = p.returncode + else: + exit_code = None + pm.call_post_execute() - if (exit_code != int(tidx["expExitCode"])): + if (exit_code is None or exit_code != int(tidx["expExitCode"])): result = False - print("exit:", exit_code, int(tidx["expExitCode"])) + print("exit: {!r}".format(exit_code)) + print("exit: {}".format(int(tidx["expExitCode"]))) + #print("exit: {!r} {}".format(exit_code, int(tidx["expExitCode"]))) print(procout) else: if args.verbose > 0: From 33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 17 Nov 2018 21:57:02 -0800 Subject: [PATCH 581/726] net-gro: reset skb->pkt_type in napi_reuse_skb() eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 0ffcbdd55fa9..066aa902d85c 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5655,6 +5655,10 @@ static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb) skb->vlan_tci = 0; skb->dev = napi->dev; skb->skb_iif = 0; + + /* eth_type_trans() assumes pkt_type is PACKET_HOST */ + skb->pkt_type = PACKET_HOST; + skb->encapsulation = 0; skb_shinfo(skb)->gso_type = 0; skb->truesize = SKB_TRUESIZE(skb_end_offset(skb)); From adba75be0d23cca92a028749d92c60c8909bbdb3 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 16 Nov 2018 16:55:04 -0500 Subject: [PATCH 582/726] tipc: fix lockdep warning when reinitilaizing sockets We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: Ying Xue Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/discover.c | 19 ++++++++++--------- net/tipc/net.c | 45 +++++++++++++++++++++++++++++++++++++-------- net/tipc/net.h | 2 +- 3 files changed, 48 insertions(+), 18 deletions(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 2830709957bd..c138d68e8a69 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -166,7 +166,8 @@ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, /* Apply trial address if we just left trial period */ if (!trial && !self) { - tipc_net_finalize(net, tn->trial_addr); + tipc_sched_net_finalize(net, tn->trial_addr); + msg_set_prevnode(buf_msg(d->skb), tn->trial_addr); msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); } @@ -300,14 +301,12 @@ static void tipc_disc_timeout(struct timer_list *t) goto exit; } - /* Trial period over ? */ - if (!time_before(jiffies, tn->addr_trial_end)) { - /* Did we just leave it ? */ - if (!tipc_own_addr(net)) - tipc_net_finalize(net, tn->trial_addr); - - msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); - msg_set_prevnode(buf_msg(d->skb), tipc_own_addr(net)); + /* Did we just leave trial period ? */ + if (!time_before(jiffies, tn->addr_trial_end) && !tipc_own_addr(net)) { + mod_timer(&d->timer, jiffies + TIPC_DISC_INIT); + spin_unlock_bh(&d->lock); + tipc_sched_net_finalize(net, tn->trial_addr); + return; } /* Adjust timeout interval according to discovery phase */ @@ -319,6 +318,8 @@ static void tipc_disc_timeout(struct timer_list *t) d->timer_intv = TIPC_DISC_SLOW; else if (!d->num_nodes && d->timer_intv > TIPC_DISC_FAST) d->timer_intv = TIPC_DISC_FAST; + msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); + msg_set_prevnode(buf_msg(d->skb), tn->trial_addr); } mod_timer(&d->timer, jiffies + d->timer_intv); diff --git a/net/tipc/net.c b/net/tipc/net.c index 62199cf5a56c..f076edb74338 100644 --- a/net/tipc/net.c +++ b/net/tipc/net.c @@ -104,6 +104,14 @@ * - A local spin_lock protecting the queue of subscriber events. */ +struct tipc_net_work { + struct work_struct work; + struct net *net; + u32 addr; +}; + +static void tipc_net_finalize(struct net *net, u32 addr); + int tipc_net_init(struct net *net, u8 *node_id, u32 addr) { if (tipc_own_id(net)) { @@ -119,17 +127,38 @@ int tipc_net_init(struct net *net, u8 *node_id, u32 addr) return 0; } -void tipc_net_finalize(struct net *net, u32 addr) +static void tipc_net_finalize(struct net *net, u32 addr) { struct tipc_net *tn = tipc_net(net); - if (!cmpxchg(&tn->node_addr, 0, addr)) { - tipc_set_node_addr(net, addr); - tipc_named_reinit(net); - tipc_sk_reinit(net); - tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, - TIPC_CLUSTER_SCOPE, 0, addr); - } + if (cmpxchg(&tn->node_addr, 0, addr)) + return; + tipc_set_node_addr(net, addr); + tipc_named_reinit(net); + tipc_sk_reinit(net); + tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, + TIPC_CLUSTER_SCOPE, 0, addr); +} + +static void tipc_net_finalize_work(struct work_struct *work) +{ + struct tipc_net_work *fwork; + + fwork = container_of(work, struct tipc_net_work, work); + tipc_net_finalize(fwork->net, fwork->addr); + kfree(fwork); +} + +void tipc_sched_net_finalize(struct net *net, u32 addr) +{ + struct tipc_net_work *fwork = kzalloc(sizeof(*fwork), GFP_ATOMIC); + + if (!fwork) + return; + INIT_WORK(&fwork->work, tipc_net_finalize_work); + fwork->net = net; + fwork->addr = addr; + schedule_work(&fwork->work); } void tipc_net_stop(struct net *net) diff --git a/net/tipc/net.h b/net/tipc/net.h index 09ad02b50bb1..b7f2e364eb99 100644 --- a/net/tipc/net.h +++ b/net/tipc/net.h @@ -42,7 +42,7 @@ extern const struct nla_policy tipc_nl_net_policy[]; int tipc_net_init(struct net *net, u8 *node_id, u32 addr); -void tipc_net_finalize(struct net *net, u32 addr); +void tipc_sched_net_finalize(struct net *net, u32 addr); void tipc_net_stop(struct net *net); int tipc_nl_net_dump(struct sk_buff *skb, struct netlink_callback *cb); int tipc_nl_net_set(struct sk_buff *skb, struct genl_info *info); From 1c1274a56999fbdf9cf84e332b28448bb2d55221 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Sat, 17 Nov 2018 12:17:06 -0500 Subject: [PATCH 583/726] tipc: don't assume linear buffer when reading ancillary data The code for reading ancillary data from a received buffer is assuming the buffer is linear. To make this assumption true we have to linearize the buffer before message data is read. Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/socket.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 636e6131769d..b57b1be7252b 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -1555,16 +1555,17 @@ static void tipc_sk_set_orig_addr(struct msghdr *m, struct sk_buff *skb) /** * tipc_sk_anc_data_recv - optionally capture ancillary data for received message * @m: descriptor for message info - * @msg: received message header + * @skb: received message buffer * @tsk: TIPC port associated with message * * Note: Ancillary data is not captured if not requested by receiver. * * Returns 0 if successful, otherwise errno */ -static int tipc_sk_anc_data_recv(struct msghdr *m, struct tipc_msg *msg, +static int tipc_sk_anc_data_recv(struct msghdr *m, struct sk_buff *skb, struct tipc_sock *tsk) { + struct tipc_msg *msg; u32 anc_data[3]; u32 err; u32 dest_type; @@ -1573,6 +1574,7 @@ static int tipc_sk_anc_data_recv(struct msghdr *m, struct tipc_msg *msg, if (likely(m->msg_controllen == 0)) return 0; + msg = buf_msg(skb); /* Optionally capture errored message object(s) */ err = msg ? msg_errcode(msg) : 0; @@ -1583,6 +1585,9 @@ static int tipc_sk_anc_data_recv(struct msghdr *m, struct tipc_msg *msg, if (res) return res; if (anc_data[1]) { + if (skb_linearize(skb)) + return -ENOMEM; + msg = buf_msg(skb); res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1], msg_data(msg)); if (res) @@ -1744,9 +1749,10 @@ static int tipc_recvmsg(struct socket *sock, struct msghdr *m, /* Collect msg meta data, including error code and rejected data */ tipc_sk_set_orig_addr(m, skb); - rc = tipc_sk_anc_data_recv(m, hdr, tsk); + rc = tipc_sk_anc_data_recv(m, skb, tsk); if (unlikely(rc)) goto exit; + hdr = buf_msg(skb); /* Capture data if non-error msg, otherwise just set return value */ if (likely(!err)) { @@ -1856,9 +1862,10 @@ static int tipc_recvstream(struct socket *sock, struct msghdr *m, /* Collect msg meta data, incl. error code and rejected data */ if (!copied) { tipc_sk_set_orig_addr(m, skb); - rc = tipc_sk_anc_data_recv(m, hdr, tsk); + rc = tipc_sk_anc_data_recv(m, skb, tsk); if (rc) break; + hdr = buf_msg(skb); } /* Copy data if msg ok, otherwise return error/partial data */ From 5d1e9c2212ea6b4dd735e4fc3dd6279a365d5d10 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 Aug 2018 10:21:49 +0200 Subject: [PATCH 584/726] mtd: rawnand: atmel: fix OF child-node lookup Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). While at it, also fix a related nfc-node reference leak. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: stable # 4.11 Cc: Nicolas Ferre Cc: Josh Wu Cc: Boris Brezillon Signed-off-by: Johan Hovold Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/atmel/nand-controller.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index fb33f6be7c4f..ad720494e8f7 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -2032,8 +2032,7 @@ atmel_hsmc_nand_controller_legacy_init(struct atmel_hsmc_nand_controller *nc) int ret; nand_np = dev->of_node; - nfc_np = of_find_compatible_node(dev->of_node, NULL, - "atmel,sama5d3-nfc"); + nfc_np = of_get_compatible_child(dev->of_node, "atmel,sama5d3-nfc"); if (!nfc_np) { dev_err(dev, "Could not find device node for sama5d3-nfc\n"); return -ENODEV; @@ -2447,15 +2446,19 @@ static int atmel_nand_controller_probe(struct platform_device *pdev) } if (caps->legacy_of_bindings) { + struct device_node *nfc_node; u32 ale_offs = 21; /* * If we are parsing legacy DT props and the DT contains a * valid NFC node, forward the request to the sama5 logic. */ - if (of_find_compatible_node(pdev->dev.of_node, NULL, - "atmel,sama5d3-nfc")) + nfc_node = of_get_compatible_child(pdev->dev.of_node, + "atmel,sama5d3-nfc"); + if (nfc_node) { caps = &atmel_sama5_nand_caps; + of_node_put(nfc_node); + } /* * Even if the compatible says we are dealing with an From 33bf5519ae5dd356b182a94e3622f42860274a38 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 16 Nov 2018 19:43:27 -0800 Subject: [PATCH 585/726] mtd: rawnand: qcom: Namespace prefix some commands PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/qcom_nandc.c | 32 +++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index ef75dfa62a4f..699d3cf49c6d 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -150,15 +150,15 @@ #define NAND_VERSION_MINOR_SHIFT 16 /* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd /* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -692,11 +692,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; } if (host->use_ecc) { @@ -1170,7 +1170,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -1224,7 +1224,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -1255,7 +1255,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0; - nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, @@ -1276,7 +1276,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); From ca0246bb97c23da9d267c2107c07fb77e38205c9 Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Fri, 16 Nov 2018 15:07:56 -0800 Subject: [PATCH 586/726] z3fold: fix possible reclaim races Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com Signed-off-by: Vitaly Wool Signed-off-by: Jongseok Kim Reported-by-by: Jongseok Kim Reviewed-by: Snild Dolkow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/z3fold.c | 103 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 63 insertions(+), 40 deletions(-) diff --git a/mm/z3fold.c b/mm/z3fold.c index 4b366d181f35..aee9b0b8d907 100644 --- a/mm/z3fold.c +++ b/mm/z3fold.c @@ -99,6 +99,7 @@ struct z3fold_header { #define NCHUNKS ((PAGE_SIZE - ZHDR_SIZE_ALIGNED) >> CHUNK_SHIFT) #define BUDDY_MASK (0x3) +#define BUDDY_SHIFT 2 /** * struct z3fold_pool - stores metadata for each z3fold pool @@ -145,7 +146,7 @@ enum z3fold_page_flags { MIDDLE_CHUNK_MAPPED, NEEDS_COMPACTING, PAGE_STALE, - UNDER_RECLAIM + PAGE_CLAIMED, /* by either reclaim or free */ }; /***************** @@ -174,7 +175,7 @@ static struct z3fold_header *init_z3fold_page(struct page *page, clear_bit(MIDDLE_CHUNK_MAPPED, &page->private); clear_bit(NEEDS_COMPACTING, &page->private); clear_bit(PAGE_STALE, &page->private); - clear_bit(UNDER_RECLAIM, &page->private); + clear_bit(PAGE_CLAIMED, &page->private); spin_lock_init(&zhdr->page_lock); kref_init(&zhdr->refcount); @@ -223,8 +224,11 @@ static unsigned long encode_handle(struct z3fold_header *zhdr, enum buddy bud) unsigned long handle; handle = (unsigned long)zhdr; - if (bud != HEADLESS) - handle += (bud + zhdr->first_num) & BUDDY_MASK; + if (bud != HEADLESS) { + handle |= (bud + zhdr->first_num) & BUDDY_MASK; + if (bud == LAST) + handle |= (zhdr->last_chunks << BUDDY_SHIFT); + } return handle; } @@ -234,6 +238,12 @@ static struct z3fold_header *handle_to_z3fold_header(unsigned long handle) return (struct z3fold_header *)(handle & PAGE_MASK); } +/* only for LAST bud, returns zero otherwise */ +static unsigned short handle_to_chunks(unsigned long handle) +{ + return (handle & ~PAGE_MASK) >> BUDDY_SHIFT; +} + /* * (handle & BUDDY_MASK) < zhdr->first_num is possible in encode_handle * but that doesn't matter. because the masking will result in the @@ -720,37 +730,39 @@ static void z3fold_free(struct z3fold_pool *pool, unsigned long handle) page = virt_to_page(zhdr); if (test_bit(PAGE_HEADLESS, &page->private)) { - /* HEADLESS page stored */ - bud = HEADLESS; - } else { - z3fold_page_lock(zhdr); - bud = handle_to_buddy(handle); - - switch (bud) { - case FIRST: - zhdr->first_chunks = 0; - break; - case MIDDLE: - zhdr->middle_chunks = 0; - zhdr->start_middle = 0; - break; - case LAST: - zhdr->last_chunks = 0; - break; - default: - pr_err("%s: unknown bud %d\n", __func__, bud); - WARN_ON(1); - z3fold_page_unlock(zhdr); - return; + /* if a headless page is under reclaim, just leave. + * NB: we use test_and_set_bit for a reason: if the bit + * has not been set before, we release this page + * immediately so we don't care about its value any more. + */ + if (!test_and_set_bit(PAGE_CLAIMED, &page->private)) { + spin_lock(&pool->lock); + list_del(&page->lru); + spin_unlock(&pool->lock); + free_z3fold_page(page); + atomic64_dec(&pool->pages_nr); } + return; } - if (bud == HEADLESS) { - spin_lock(&pool->lock); - list_del(&page->lru); - spin_unlock(&pool->lock); - free_z3fold_page(page); - atomic64_dec(&pool->pages_nr); + /* Non-headless case */ + z3fold_page_lock(zhdr); + bud = handle_to_buddy(handle); + + switch (bud) { + case FIRST: + zhdr->first_chunks = 0; + break; + case MIDDLE: + zhdr->middle_chunks = 0; + break; + case LAST: + zhdr->last_chunks = 0; + break; + default: + pr_err("%s: unknown bud %d\n", __func__, bud); + WARN_ON(1); + z3fold_page_unlock(zhdr); return; } @@ -758,7 +770,7 @@ static void z3fold_free(struct z3fold_pool *pool, unsigned long handle) atomic64_dec(&pool->pages_nr); return; } - if (test_bit(UNDER_RECLAIM, &page->private)) { + if (test_bit(PAGE_CLAIMED, &page->private)) { z3fold_page_unlock(zhdr); return; } @@ -836,20 +848,30 @@ static int z3fold_reclaim_page(struct z3fold_pool *pool, unsigned int retries) } list_for_each_prev(pos, &pool->lru) { page = list_entry(pos, struct page, lru); - if (test_bit(PAGE_HEADLESS, &page->private)) - /* candidate found */ - break; + + /* this bit could have been set by free, in which case + * we pass over to the next page in the pool. + */ + if (test_and_set_bit(PAGE_CLAIMED, &page->private)) + continue; zhdr = page_address(page); - if (!z3fold_page_trylock(zhdr)) + if (test_bit(PAGE_HEADLESS, &page->private)) + break; + + if (!z3fold_page_trylock(zhdr)) { + zhdr = NULL; continue; /* can't evict at this point */ + } kref_get(&zhdr->refcount); list_del_init(&zhdr->buddy); zhdr->cpu = -1; - set_bit(UNDER_RECLAIM, &page->private); break; } + if (!zhdr) + break; + list_del_init(&page->lru); spin_unlock(&pool->lock); @@ -898,6 +920,7 @@ next: if (test_bit(PAGE_HEADLESS, &page->private)) { if (ret == 0) { free_z3fold_page(page); + atomic64_dec(&pool->pages_nr); return 0; } spin_lock(&pool->lock); @@ -905,7 +928,7 @@ next: spin_unlock(&pool->lock); } else { z3fold_page_lock(zhdr); - clear_bit(UNDER_RECLAIM, &page->private); + clear_bit(PAGE_CLAIMED, &page->private); if (kref_put(&zhdr->refcount, release_z3fold_page_locked)) { atomic64_dec(&pool->pages_nr); @@ -964,7 +987,7 @@ static void *z3fold_map(struct z3fold_pool *pool, unsigned long handle) set_bit(MIDDLE_CHUNK_MAPPED, &page->private); break; case LAST: - addr += PAGE_SIZE - (zhdr->last_chunks << CHUNK_SHIFT); + addr += PAGE_SIZE - (handle_to_chunks(handle) << CHUNK_SHIFT); break; default: pr_err("unknown buddy id %d\n", buddy); From 8fcb2312d1e3300e81aa871aad00d4c038cfc184 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 16 Nov 2018 15:08:00 -0800 Subject: [PATCH 587/726] kernel/sched/psi.c: simplify cgroup_move_task() The existing code triggered an invalid warning about 'rq' possibly being used uninitialized. Instead of doing the silly warning suppression by initializa it to NULL, refactor the code to bail out early instead. Warning was: kernel/sched/psi.c: In function `cgroup_move_task': kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized] Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net Fixes: 2ce7135adc9ad ("psi: cgroup support") Signed-off-by: Olof Johansson Reviewed-by: Andrew Morton Acked-by: Johannes Weiner Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sched/psi.c | 47 +++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c index 7cdecfc010af..3d7355d7c3e3 100644 --- a/kernel/sched/psi.c +++ b/kernel/sched/psi.c @@ -633,38 +633,39 @@ void psi_cgroup_free(struct cgroup *cgroup) */ void cgroup_move_task(struct task_struct *task, struct css_set *to) { - bool move_psi = !psi_disabled; unsigned int task_flags = 0; struct rq_flags rf; struct rq *rq; - if (move_psi) { - rq = task_rq_lock(task, &rf); - - if (task_on_rq_queued(task)) - task_flags = TSK_RUNNING; - else if (task->in_iowait) - task_flags = TSK_IOWAIT; - - if (task->flags & PF_MEMSTALL) - task_flags |= TSK_MEMSTALL; - - if (task_flags) - psi_task_change(task, task_flags, 0); + if (psi_disabled) { + /* + * Lame to do this here, but the scheduler cannot be locked + * from the outside, so we move cgroups from inside sched/. + */ + rcu_assign_pointer(task->cgroups, to); + return; } - /* - * Lame to do this here, but the scheduler cannot be locked - * from the outside, so we move cgroups from inside sched/. - */ + rq = task_rq_lock(task, &rf); + + if (task_on_rq_queued(task)) + task_flags = TSK_RUNNING; + else if (task->in_iowait) + task_flags = TSK_IOWAIT; + + if (task->flags & PF_MEMSTALL) + task_flags |= TSK_MEMSTALL; + + if (task_flags) + psi_task_change(task, task_flags, 0); + + /* See comment above */ rcu_assign_pointer(task->cgroups, to); - if (move_psi) { - if (task_flags) - psi_task_change(task, 0, task_flags); + if (task_flags) + psi_task_change(task, 0, task_flags); - task_rq_unlock(rq, task, &rf); - } + task_rq_unlock(rq, task, &rf); } #endif /* CONFIG_CGROUPS */ From 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 16 Nov 2018 15:08:04 -0800 Subject: [PATCH 588/726] hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444! This bug has been experienced several times by the Oracle DB team. The BUG is in remove_inode_hugepages() as follows: /* * If page is mapped, it was faulted in after being * unmapped in caller. Unmap (again) now after taking * the fault mutex. The mutex will prevent faults * until we finish removing the page. * * This race can only happen in the hole punch case. * Getting here in a truncate operation is a bug. */ if (unlikely(page_mapped(page))) { BUG_ON(truncate_op); In this case, the elevated map count is not the result of a race. Rather it was incorrectly incremented as the result of a bug in the huge pmd sharing code. Consider the following: - Process A maps a hugetlbfs file of sufficient size and alignment (PUD_SIZE) that a pmd page could be shared. - Process B maps the same hugetlbfs file with the same size and alignment such that a pmd page is shared. - Process B then calls mprotect() to change protections for the mapping with the shared pmd. As a result, the pmd is 'unshared'. - Process B then calls mprotect() again to chage protections for the mapping back to their original value. pmd remains unshared. - Process B then forks and process C is created. During the fork process, we do dup_mm -> dup_mmap -> copy_page_range to copy page tables. Copying page tables for hugetlb mappings is done in the routine copy_hugetlb_page_range. In copy_hugetlb_page_range(), the destination pte is obtained by: dst_pte = huge_pte_alloc(dst, addr, sz); If pmd sharing is possible, the returned pointer will be to a pte in an existing page table. In the situation above, process C could share with either process A or process B. Since process A is first in the list, the returned pte is a pointer to a pte in process A's page table. However, the check for pmd sharing in copy_hugetlb_page_range is: /* If the pagetables are shared don't copy or take references */ if (dst_pte == src_pte) continue; Since process C is sharing with process A instead of process B, the above test fails. The code in copy_hugetlb_page_range which follows assumes dst_pte points to a huge_pte_none pte. It copies the pte entry from src_pte to dst_pte and increments this map count of the associated page. This is how we end up with an elevated map count. To solve, check the dst_pte entry for huge_pte_none. If !none, this implies PMD sharing so do not copy. Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing") Signed-off-by: Mike Kravetz Reviewed-by: Naoya Horiguchi Cc: Michal Hocko Cc: Hugh Dickins Cc: Andrea Arcangeli Cc: "Kirill A . Shutemov" Cc: Davidlohr Bueso Cc: Prakash Sangappa Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index c007fb5fb8d5..7f2a28ab46d5 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3233,7 +3233,7 @@ static int is_hugetlb_entry_hwpoisoned(pte_t pte) int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, struct vm_area_struct *vma) { - pte_t *src_pte, *dst_pte, entry; + pte_t *src_pte, *dst_pte, entry, dst_entry; struct page *ptepage; unsigned long addr; int cow; @@ -3261,15 +3261,30 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, break; } - /* If the pagetables are shared don't copy or take references */ - if (dst_pte == src_pte) + /* + * If the pagetables are shared don't copy or take references. + * dst_pte == src_pte is the common case of src/dest sharing. + * + * However, src could have 'unshared' and dst shares with + * another vma. If dst_pte !none, this implies sharing. + * Check here before taking page table lock, and once again + * after taking the lock below. + */ + dst_entry = huge_ptep_get(dst_pte); + if ((dst_pte == src_pte) || !huge_pte_none(dst_entry)) continue; dst_ptl = huge_pte_lock(h, dst, dst_pte); src_ptl = huge_pte_lockptr(h, src, src_pte); spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING); entry = huge_ptep_get(src_pte); - if (huge_pte_none(entry)) { /* skip none entry */ + dst_entry = huge_ptep_get(dst_pte); + if (huge_pte_none(entry) || !huge_pte_none(dst_entry)) { + /* + * Skip if src entry none. Also, skip in the + * unlikely case dst entry !none as this implies + * sharing with another vma. + */ ; } else if (unlikely(is_hugetlb_entry_migration(entry) || is_hugetlb_entry_hwpoisoned(entry))) { From f341e16fb67ddc199582d187b0d39120a9dfd2bf Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 16 Nov 2018 15:08:08 -0800 Subject: [PATCH 589/726] MAINTAINERS: update OMAP MMC entry Jarkko's e-mail address hasn't worked for a long time. We still want to keep this driver working as it is critical for some of the OMAP boards. I use and test this driver frequently, so change myself as a maintainer with "Odd Fixes" status. Link: http://lkml.kernel.org/r/20181106222750.12939-1-aaro.koskinen@iki.fi Signed-off-by: Aaro Koskinen Acked-by: Tony Lindgren Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 4 ++++ MAINTAINERS | 4 ++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/CREDITS b/CREDITS index 5befd2d714d0..84cbec4c6211 100644 --- a/CREDITS +++ b/CREDITS @@ -2138,6 +2138,10 @@ E: paul@laufernet.com D: Soundblaster driver fixes, ISAPnP quirk S: California, USA +N: Jarkko Lavinen +E: jarkko.lavinen@nokia.com +D: OMAP MMC support + N: Jonathan Layes D: ARPD support diff --git a/MAINTAINERS b/MAINTAINERS index 6c3fbbb361f8..b755a89fa325 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10808,9 +10808,9 @@ F: drivers/media/platform/omap3isp/ F: drivers/staging/media/omap4iss/ OMAP MMC SUPPORT -M: Jarkko Lavinen +M: Aaro Koskinen L: linux-omap@vger.kernel.org -S: Maintained +S: Odd Fixes F: drivers/mmc/host/omap.c OMAP POWER MANAGEMENT SUPPORT From 873d7bcfd066663e3e50113dc4a0de19289b6354 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Fri, 16 Nov 2018 15:08:11 -0800 Subject: [PATCH 590/726] mm/swapfile.c: use kvzalloc for swap_info_struct allocation Commit a2468cc9bfdf ("swap: choose swap device according to numa node") changed 'avail_lists' field of 'struct swap_info_struct' to an array. In popular linux distros it increased size of swap_info_struct up to 40 Kbytes and now swap_info_struct allocation requires order-4 page. Switch to kvzmalloc allows to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node") Signed-off-by: Vasily Averin Acked-by: Aaron Lu Acked-by: Michal Hocko Reviewed-by: Andrew Morton Cc: Huang Ying Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index 644f746e167a..8688ae65ef58 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2813,7 +2813,7 @@ static struct swap_info_struct *alloc_swap_info(void) unsigned int type; int i; - p = kzalloc(sizeof(*p), GFP_KERNEL); + p = kvzalloc(sizeof(*p), GFP_KERNEL); if (!p) return ERR_PTR(-ENOMEM); @@ -2824,7 +2824,7 @@ static struct swap_info_struct *alloc_swap_info(void) } if (type >= MAX_SWAPFILES) { spin_unlock(&swap_lock); - kfree(p); + kvfree(p); return ERR_PTR(-EPERM); } if (type >= nr_swapfiles) { @@ -2838,7 +2838,7 @@ static struct swap_info_struct *alloc_swap_info(void) smp_wmb(); nr_swapfiles++; } else { - kfree(p); + kvfree(p); p = swap_info[type]; /* * Do not memset this entry: a racing procfs swap_next() From 9d7899999c62c1a81129b76d2a6ecbc4655e1597 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 16 Nov 2018 15:08:15 -0800 Subject: [PATCH 591/726] mm, memory_hotplug: check zone_movable in has_unmovable_pages Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") has told us that this is not strictly true though. Bootmem pages should be marked reserved though so we can move the original check after the PageReserved check. Pages from other zones are still prone to races but we even do not pretend that memory hotremove works for those so pre-mature failure doesn't hurt that much. Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org Fixes: 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") Signed-off-by: Michal Hocko Reported-by: Baoquan He Tested-by: Baoquan He Acked-by: Baoquan He Reviewed-by: Oscar Salvador Acked-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a919ba5cb3c8..a0e5ec0addd2 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -7788,6 +7788,14 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count, if (PageReserved(page)) goto unmovable; + /* + * If the zone is movable and we have ruled out all reserved + * pages then it should be reasonably safe to assume the rest + * is movable. + */ + if (zone_idx(zone) == ZONE_MOVABLE) + continue; + /* * Hugepages are not in LRU lists, but they're movable. * We need not scan over tail pages bacause we don't From a76cf1a474d7dbcd9336b5f5afb0162baa142cf0 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 16 Nov 2018 15:08:18 -0800 Subject: [PATCH 592/726] mm: don't reclaim inodes with many attached pages Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects") leads to a regression on his setup: periodically the majority of the pagecache is evicted without an obvious reason, while before the change the amount of free memory was balancing around the watermark. The reason behind is that the mentioned above change created some minimal background pressure on the inode cache. The problem is that if an inode is considered to be reclaimed, all belonging pagecache page are stripped, no matter how many of them are there. So, if a huge multi-gigabyte file is cached in the memory, and the goal is to reclaim only few slab objects (unused inodes), we still can eventually evict all gigabytes of the pagecache at once. The workload described by Spock has few large non-mapped files in the pagecache, so it's especially noticeable. To solve the problem let's postpone the reclaim of inodes, which have more than 1 attached page. Let's wait until the pagecache pages will be evicted naturally by scanning the corresponding LRU lists, and only then reclaim the inode structure. Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com Signed-off-by: Roman Gushchin Reported-by: Spock Tested-by: Spock Reviewed-by: Andrew Morton Cc: Michal Hocko Cc: Rik van Riel Cc: Randy Dunlap Cc: [4.19.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 9e198f00b64c..35d2108d567c 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -730,8 +730,11 @@ static enum lru_status inode_lru_isolate(struct list_head *item, return LRU_REMOVED; } - /* recently referenced inodes get one more pass */ - if (inode->i_state & I_REFERENCED) { + /* + * Recently referenced inodes and inodes with many attached pages + * get one more pass. + */ + if (inode->i_state & I_REFERENCED || inode->i_data.nrpages > 1) { inode->i_state &= ~I_REFERENCED; spin_unlock(&inode->i_lock); return LRU_ROTATE; From f5f67cc0e0d3d17ee046ba83f831f267767b8554 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 16 Nov 2018 15:08:22 -0800 Subject: [PATCH 593/726] scripts/faddr2line: fix location of start_kernel in comment Fix a source file reference location to the correct path name. Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.org Signed-off-by: Randy Dunlap Acked-by: Josh Poimboeuf Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/faddr2line | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/faddr2line b/scripts/faddr2line index a0149db00be7..6c6439f69a72 100755 --- a/scripts/faddr2line +++ b/scripts/faddr2line @@ -71,7 +71,7 @@ die() { # Try to figure out the source directory prefix so we can remove it from the # addr2line output. HACK ALERT: This assumes that start_kernel() is in -# kernel/init.c! This only works for vmlinux. Otherwise it falls back to +# init/main.c! This only works for vmlinux. Otherwise it falls back to # printing the absolute path. find_dir_prefix() { local objfile=$1 From 5040f8df56fb90c7919f1c9b0b6e54c843437456 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Fri, 16 Nov 2018 15:08:25 -0800 Subject: [PATCH 594/726] ocfs2: free up write context when direct IO failed The write context should also be freed even when direct IO failed. Otherwise a memory leak is introduced and entries remain in oi->ip_unwritten_list causing the following BUG later in unlink path: ERROR: bug expression: !list_empty(&oi->ip_unwritten_list) ERROR: Clear inode of 215043, inode has unwritten extents ... Call Trace: ? __set_current_blocked+0x42/0x68 ocfs2_evict_inode+0x91/0x6a0 [ocfs2] ? bit_waitqueue+0x40/0x33 evict+0xdb/0x1af iput+0x1a2/0x1f7 do_unlinkat+0x194/0x28f SyS_unlinkat+0x1b/0x2f do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x151/0x0 This patch also logs, with frequency limit, direct IO failures. Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang Reviewed-by: Junxiao Bi Reviewed-by: Changwei Ge Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/aops.c | 12 ++++++++++-- fs/ocfs2/cluster/masklog.h | 9 +++++++++ 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index da578ad4c08f..eb1ce30412dc 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -2411,8 +2411,16 @@ static int ocfs2_dio_end_io(struct kiocb *iocb, /* this io's submitter should not have unlocked this before we could */ BUG_ON(!ocfs2_iocb_is_rw_locked(iocb)); - if (bytes > 0 && private) - ret = ocfs2_dio_end_io_write(inode, private, offset, bytes); + if (bytes <= 0) + mlog_ratelimited(ML_ERROR, "Direct IO failed, bytes = %lld", + (long long)bytes); + if (private) { + if (bytes > 0) + ret = ocfs2_dio_end_io_write(inode, private, offset, + bytes); + else + ocfs2_dio_free_write_ctx(inode, private); + } ocfs2_iocb_clear_rw_locked(iocb); diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h index 308ea0eb35fd..a396096a5099 100644 --- a/fs/ocfs2/cluster/masklog.h +++ b/fs/ocfs2/cluster/masklog.h @@ -178,6 +178,15 @@ do { \ ##__VA_ARGS__); \ } while (0) +#define mlog_ratelimited(mask, fmt, ...) \ +do { \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + if (__ratelimit(&_rs)) \ + mlog(mask, fmt, ##__VA_ARGS__); \ +} while (0) + #define mlog_errno(st) ({ \ int _st = (st); \ if (_st != -ERESTARTSYS && _st != -EINTR && \ From 78179556e7605ba07fd3ddba6ab8891fa457b93e Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 16 Nov 2018 15:08:29 -0800 Subject: [PATCH 595/726] mm/gup.c: fix follow_page_mask() kerneldoc comment Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") modified the signature of follow_page_mask() but left the parameter description behind. Update the description to make the code and comments agree again. While at it, update formatting of the return value description to match Documentation/doc-guide/kernel-doc.rst guidelines. Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/gup.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/gup.c b/mm/gup.c index f76e77a2d34b..aa43620a3270 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -385,11 +385,17 @@ static struct page *follow_p4d_mask(struct vm_area_struct *vma, * @vma: vm_area_struct mapping @address * @address: virtual address to look up * @flags: flags modifying lookup behaviour - * @page_mask: on output, *page_mask is set according to the size of the page + * @ctx: contains dev_pagemap for %ZONE_DEVICE memory pinning and a + * pointer to output page_mask * * @flags can have FOLL_ flags set, defined in * - * Returns the mapped (struct page *), %NULL if no mapping exists, or + * When getting pages from ZONE_DEVICE memory, the @ctx->pgmap caches + * the device's dev_pagemap metadata to avoid repeating expensive lookups. + * + * On output, the @ctx->page_mask is set according to the size of the page. + * + * Return: the mapped (struct page *), %NULL if no mapping exists, or * an error pointer if there is a mapping to something not represented * by a page descriptor (see also vm_normal_page()). */ From 13c9aaf7fa01cc7600c61981609feadeef3354ec Mon Sep 17 00:00:00 2001 From: Janne Huttunen Date: Fri, 16 Nov 2018 15:08:32 -0800 Subject: [PATCH 596/726] mm/vmstat.c: fix NUMA statistics updates Scan through the whole array to see if an update is needed. While we're at it, use sizeof() to be safe against any possible type changes in the future. The bug here is that we wouldn't sync per-cpu counters into global ones if there was an update of numa_stats for higher cpus. Highly theoretical one though because it is much more probable that zone_stats are updated so we would refresh anyway. So I wouldn't bother to mark this for stable, yet something nice to fix. [mhocko@suse.com: changelog enhancement] Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com Fixes: 1d90ca897cb0 ("mm: update NUMA counter threshold size") Signed-off-by: Janne Huttunen Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmstat.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/mm/vmstat.c b/mm/vmstat.c index 6038ce593ce3..9c624595e904 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -1827,12 +1827,13 @@ static bool need_update(int cpu) /* * The fast way of checking if there are any vmstat diffs. - * This works because the diffs are byte sized items. */ - if (memchr_inv(p->vm_stat_diff, 0, NR_VM_ZONE_STAT_ITEMS)) + if (memchr_inv(p->vm_stat_diff, 0, NR_VM_ZONE_STAT_ITEMS * + sizeof(p->vm_stat_diff[0]))) return true; #ifdef CONFIG_NUMA - if (memchr_inv(p->vm_numa_stat_diff, 0, NR_VM_NUMA_STAT_ITEMS)) + if (memchr_inv(p->vm_numa_stat_diff, 0, NR_VM_NUMA_STAT_ITEMS * + sizeof(p->vm_numa_stat_diff[0]))) return true; #endif } From 1c23b4108d716cc848b38532063a8aca4f86add8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 16 Nov 2018 15:08:35 -0800 Subject: [PATCH 597/726] lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com Signed-off-by: Arnd Bergmann Signed-off-by: Andrey Ryabinin Acked-by: Olof Johansson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/ubsan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/lib/ubsan.c b/lib/ubsan.c index 59fee96c29a0..e4162f59a81c 100644 --- a/lib/ubsan.c +++ b/lib/ubsan.c @@ -427,8 +427,7 @@ void __ubsan_handle_shift_out_of_bounds(struct shift_out_of_bounds_data *data, EXPORT_SYMBOL(__ubsan_handle_shift_out_of_bounds); -void __noreturn -__ubsan_handle_builtin_unreachable(struct unreachable_data *data) +void __ubsan_handle_builtin_unreachable(struct unreachable_data *data) { unsigned long flags; From 1a413646931cb14442065cfc17561e50f5b5bb44 Mon Sep 17 00:00:00 2001 From: Yufen Yu Date: Fri, 16 Nov 2018 15:08:39 -0800 Subject: [PATCH 598/726] tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com Signed-off-by: Yufen Yu Reviewed-by: Andrew Morton Cc: Al Viro Cc: Hugh Dickins Cc: William Kucharski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/shmem.c b/mm/shmem.c index ea26d7a0342d..d44991ea5ed4 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2563,9 +2563,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence) inode_lock(inode); /* We're holding i_mutex so we can access i_size directly */ - if (offset < 0) - offset = -EINVAL; - else if (offset >= inode->i_size) + if (offset < 0 || offset >= inode->i_size) offset = -ENXIO; else { start = offset >> PAGE_SHIFT; From 6f4d29df66acd49303a99025046b85cabe7aa17a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 16 Nov 2018 15:08:43 -0800 Subject: [PATCH 599/726] scripts/spdxcheck.py: make python3 compliant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this change the following happens when using Python3 (3.6.6): $ echo "GPL-2.0" | python3 scripts/spdxcheck.py - FAIL: 'str' object has no attribute 'decode' Traceback (most recent call last): File "scripts/spdxcheck.py", line 253, in parser.parse_lines(sys.stdin, args.maxlines, '-') File "scripts/spdxcheck.py", line 171, in parse_lines line = line.decode(locale.getpreferredencoding(False), errors='ignore') AttributeError: 'str' object has no attribute 'decode' So as the line is already a string, there is no need to decode it and the line can be dropped. /usr/bin/python on Arch is Python 3. So this would indeed be worth going into 4.19. Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Cc: Thomas Gleixner Cc: Joe Perches Cc: Greg Kroah-Hartman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/spdxcheck.py | 1 - 1 file changed, 1 deletion(-) diff --git a/scripts/spdxcheck.py b/scripts/spdxcheck.py index 839e190bbd7a..5056fb3b897d 100755 --- a/scripts/spdxcheck.py +++ b/scripts/spdxcheck.py @@ -168,7 +168,6 @@ class id_parser(object): self.curline = 0 try: for line in fd: - line = line.decode(locale.getpreferredencoding(False), errors='ignore') self.curline += 1 if self.curline > maxlines: break From c63ae43ba53bc432b414fd73dd5f4b01fcb1ab43 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 16 Nov 2018 15:08:53 -0800 Subject: [PATCH 600/726] mm, page_alloc: check for max order in hot path Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz Signed-off-by: Michal Hocko Reported-by: Konstantin Khlebnikov Reported-by: Kyungtae Kim Acked-by: Vlastimil Babka Cc: Balbir Singh Cc: Mel Gorman Cc: Pavel Tatashin Cc: Oscar Salvador Cc: Mike Rapoport Cc: Aaron Lu Cc: Joonsoo Kim Cc: Byoungyoung Lee Cc: "Dae R. Jeong" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a0e5ec0addd2..6847177dc4a1 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4060,17 +4060,6 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, unsigned int cpuset_mems_cookie; int reserve_flags; - /* - * In the slowpath, we sanity check order to avoid ever trying to - * reclaim >= MAX_ORDER areas which will never succeed. Callers may - * be using allocators in order of preference for an area that is - * too large. - */ - if (order >= MAX_ORDER) { - WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN)); - return NULL; - } - /* * We also sanity check to catch abuse of atomic reserves being used by * callers that are not in atomic context. @@ -4364,6 +4353,15 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, int preferred_nid, gfp_t alloc_mask; /* The gfp_t that was actually used for allocation */ struct alloc_context ac = { }; + /* + * There are several places where we assume that the order value is sane + * so bail out early if the request is out of bound. + */ + if (unlikely(order >= MAX_ORDER)) { + WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN)); + return NULL; + } + gfp_mask &= gfp_allowed_mask; alloc_mask = gfp_mask; if (!prepare_alloc_pages(gfp_mask, order, preferred_nid, nodemask, &ac, &alloc_mask, &alloc_flags)) From 45e79815b89149dc6698e71b587c86ffaf4062aa Mon Sep 17 00:00:00 2001 From: Chen Chang Date: Fri, 16 Nov 2018 15:08:57 -0800 Subject: [PATCH 601/726] mm/memblock.c: fix a typo in __next_mem_pfn_range() comments Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com Signed-off-by: Chen Chang Acked-by: Michal Hocko Acked-by: Mike Rapoport Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memblock.c b/mm/memblock.c index 7df468c8ebc8..9a2d5ae81ae1 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -1179,7 +1179,7 @@ void __init_memblock __next_mem_range_rev(u64 *idx, int nid, #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP /* - * Common iterator interface used to define for_each_mem_range(). + * Common iterator interface used to define for_each_mem_pfn_range(). */ void __init_memblock __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, From 9ff01193a20d391e8dbce4403dd5ef87c7eaaca6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 18 Nov 2018 13:33:44 -0800 Subject: [PATCH 602/726] Linux 4.20-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2f36db897895..ddbf627cad8f 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 20 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = "People's Front" # *DOCUMENTATION* From 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Thu, 15 Nov 2018 11:42:16 +0100 Subject: [PATCH 603/726] drm/ast: Remove existing framebuffers before loading driver If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 Signed-off-by: Thomas Zimmermann Cc: Tested-by: Y.C. Chen Reviewed-by: Jean Delvare Tested-by: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/ast/ast_drv.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index 69dab82a3771..bf589c53b908 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = { MODULE_DEVICE_TABLE(pci, pciidlist); +static void ast_kick_out_firmware_fb(struct pci_dev *pdev) +{ + struct apertures_struct *ap; + bool primary = false; + + ap = alloc_apertures(1); + if (!ap) + return; + + ap->ranges[0].base = pci_resource_start(pdev, 0); + ap->ranges[0].size = pci_resource_len(pdev, 0); + +#ifdef CONFIG_X86 + primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW; +#endif + drm_fb_helper_remove_conflicting_framebuffers(ap, "astdrmfb", primary); + kfree(ap); +} + static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + ast_kick_out_firmware_fb(pdev); + return drm_get_pci_dev(pdev, ent, &driver); } From 7ddacfa564870cdd97275fd87decb6174abc6380 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 18 Nov 2018 10:45:30 -0800 Subject: [PATCH 604/726] ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Preethi Ramachandra Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 14b422f35504..059f0531f7c1 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2359,10 +2359,13 @@ EXPORT_SYMBOL_GPL(ip6_update_pmtu); void ip6_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, __be32 mtu) { + int oif = sk->sk_bound_dev_if; struct dst_entry *dst; - ip6_update_pmtu(skb, sock_net(sk), mtu, - sk->sk_bound_dev_if, sk->sk_mark, sk->sk_uid); + if (!oif && skb->dev) + oif = l3mdev_master_ifindex(skb->dev); + + ip6_update_pmtu(skb, sock_net(sk), mtu, oif, sk->sk_mark, sk->sk_uid); dst = __sk_dst_get(sk); if (!dst || !dst->obsolete || From 8ebebcba559a1bfbaec7bbda64feb9870b9c58da Mon Sep 17 00:00:00 2001 From: Matthew Cover Date: Sun, 18 Nov 2018 00:46:00 -0700 Subject: [PATCH 605/726] tuntap: fix multiqueue rx When writing packets to a descriptor associated with a combined queue, the packets should end up on that queue. Before this change all packets written to any descriptor associated with a tap interface end up on rx-0, even when the descriptor is associated with a different queue. The rx traffic can be generated by either of the following. 1. a simple tap program which spins up multiple queues and writes packets to each of the file descriptors 2. tx from a qemu vm with a tap multiqueue netdev The queue for rx traffic can be observed by either of the following (done on the hypervisor in the qemu case). 1. a simple netmap program which opens and reads from per-queue descriptors 2. configuring RPS and doing per-cpu captures with rxtxcpu Alternatively, if you printk() the return value of skb_get_rx_queue() just before each instance of netif_receive_skb() in tun.c, you will get 65535 for every skb. Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes the association between descriptor and rx queue. Signed-off-by: Matthew Cover Signed-off-by: David S. Miller --- drivers/net/tun.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 060135ceaf0e..e244f5d7512a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1536,6 +1536,7 @@ static void tun_rx_batched(struct tun_struct *tun, struct tun_file *tfile, if (!rx_batched || (!more && skb_queue_empty(queue))) { local_bh_disable(); + skb_record_rx_queue(skb, tfile->queue_index); netif_receive_skb(skb); local_bh_enable(); return; @@ -1555,8 +1556,11 @@ static void tun_rx_batched(struct tun_struct *tun, struct tun_file *tfile, struct sk_buff *nskb; local_bh_disable(); - while ((nskb = __skb_dequeue(&process_queue))) + while ((nskb = __skb_dequeue(&process_queue))) { + skb_record_rx_queue(nskb, tfile->queue_index); netif_receive_skb(nskb); + } + skb_record_rx_queue(skb, tfile->queue_index); netif_receive_skb(skb); local_bh_enable(); } @@ -2451,6 +2455,7 @@ build: if (!rcu_dereference(tun->steering_prog)) rxhash = __skb_get_hash_symmetric(skb); + skb_record_rx_queue(skb, tfile->queue_index); netif_receive_skb(skb); stats = get_cpu_ptr(tun->pcpu_stats); From d98ccfc3948ab63152494bb6b9c17e15295c0310 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Tue, 13 Nov 2018 13:30:40 -0600 Subject: [PATCH 606/726] cpufreq: ti-cpufreq: Only register platform_device when supported Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force the driver to probe on any platforms where the driver is built in. However, this should only happen on platforms that actually can make use of the driver. There is already functionality in place to match the SoC compatible so let's factor this out into a separate call and make sure we find a match before creating the ti-cpufreq platform device. Reviewed-by: Johan Hovold Signed-off-by: Dave Gerlach Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/ti-cpufreq.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c index 3f0e2a14895a..22b53bf26817 100644 --- a/drivers/cpufreq/ti-cpufreq.c +++ b/drivers/cpufreq/ti-cpufreq.c @@ -201,19 +201,28 @@ static const struct of_device_id ti_cpufreq_of_match[] = { {}, }; +static const struct of_device_id *ti_cpufreq_match_node(void) +{ + struct device_node *np; + const struct of_device_id *match; + + np = of_find_node_by_path("/"); + match = of_match_node(ti_cpufreq_of_match, np); + of_node_put(np); + + return match; +} + static int ti_cpufreq_probe(struct platform_device *pdev) { u32 version[VERSION_COUNT]; - struct device_node *np; const struct of_device_id *match; struct opp_table *ti_opp_table; struct ti_cpufreq_data *opp_data; const char * const reg_names[] = {"vdd", "vbb"}; int ret; - np = of_find_node_by_path("/"); - match = of_match_node(ti_cpufreq_of_match, np); - of_node_put(np); + match = dev_get_platdata(&pdev->dev); if (!match) return -ENODEV; @@ -290,7 +299,14 @@ fail_put_node: static int ti_cpufreq_init(void) { - platform_device_register_simple("ti-cpufreq", -1, NULL, 0); + const struct of_device_id *match; + + /* Check to ensure we are on a compatible platform */ + match = ti_cpufreq_match_node(); + if (match) + platform_device_register_data(NULL, "ti-cpufreq", -1, match, + sizeof(*match)); + return 0; } module_init(ti_cpufreq_init); From c22397888f1eed98cd59f0a88f2a5f6925f80e15 Mon Sep 17 00:00:00 2001 From: Chanho Min Date: Mon, 12 Nov 2018 12:54:45 +0900 Subject: [PATCH 607/726] exec: make de_thread() freezable Suspend fails due to the exec family of functions blocking the freezer. The casue is that de_thread() sleeps in TASK_UNINTERRUPTIBLE waiting for all sub-threads to die, and we have the deadlock if one of them is frozen. This also can occur with the schedule() waiting for the group thread leader to exit if it is frozen. In our machine, it causes freeze timeout as bellows. Freezing of tasks failed after 20.010 seconds (1 tasks refusing to freeze, wq_busy=0): setcpushares-ls D ffffffc00008ed70 0 5817 1483 0x0040000d Call trace: [] __switch_to+0x88/0xa0 [] __schedule+0x1bc/0x720 [] schedule+0x40/0xa8 [] flush_old_exec+0xdc/0x640 [] load_elf_binary+0x2a8/0x1090 [] search_binary_handler+0x9c/0x240 [] load_script+0x20c/0x228 [] search_binary_handler+0x9c/0x240 [] do_execveat_common.isra.14+0x4f8/0x6e8 [] compat_SyS_execve+0x38/0x48 [] el0_svc_naked+0x24/0x28 To fix this, make de_thread() freezable. It looks safe and works fine. Suggested-by: Oleg Nesterov Signed-off-by: Chanho Min Acked-by: Oleg Nesterov Acked-by: Pavel Machek Acked-by: Michal Hocko Signed-off-by: Rafael J. Wysocki --- fs/exec.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index fc281b738a98..acc3a5536384 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -62,6 +62,7 @@ #include #include #include +#include #include #include @@ -1083,7 +1084,7 @@ static int de_thread(struct task_struct *tsk) while (sig->notify_count) { __set_current_state(TASK_KILLABLE); spin_unlock_irq(lock); - schedule(); + freezable_schedule(); if (unlikely(__fatal_signal_pending(tsk))) goto killed; spin_lock_irq(lock); @@ -1111,7 +1112,7 @@ static int de_thread(struct task_struct *tsk) __set_current_state(TASK_KILLABLE); write_unlock_irq(&tasklist_lock); cgroup_threadgroup_change_end(tsk); - schedule(); + freezable_schedule(); if (unlikely(__fatal_signal_pending(tsk))) goto killed; } From cdcefe6bd9df754f528ffc339d3cc143cea4ddf6 Mon Sep 17 00:00:00 2001 From: Rajat Jain Date: Mon, 29 Oct 2018 15:17:01 -0700 Subject: [PATCH 608/726] mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL Problem: The card detect IRQ does not work with modern BIOS (that want to use _DSD to provide the card detect GPIO to the driver). Details: The mmc core provides the mmc_gpiod_request_cd() API to let host drivers request the gpio descriptor for the "card detect" pin. This pin is specified in the ACPI for the SDHC device: * Either as a resource using _CRS. This is a method used by legacy BIOS. (The driver needs to tell which resource index). * Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally points to an entry in _CRS). This way, the driver can lookup using a string. This is what modern BIOS prefer to use. This API finally results in a call to the following code: struct gpio_desc *acpi_find_gpio(..., const char *con_id,...) { ... /* Lookup gpio (using "-gpio") in the _DSD */ ... if (!acpi_can_fallback_to_crs(adev, con_id)) return ERR_PTR(-ENOENT); ... /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */ ... } Note that this means that if the ACPI has _DSD properties, the kernel will never use _CRS for the lookup (Because acpi_can_fallback_to_crs() will always be false for any device hat has _DSD entries). The SDHCI driver is thus currently broken on a modern BIOS, even if BIOS provides both _CRS (for index based lookup) and _DSD entries (for string based lookup). Ironically, none of these will be used for the lookup currently because: * Since the con_id is NULL, acpi_find_gpio() does not find a matching entry in DSDT. (The _DSDT entry has the property name = "cd-gpios") * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs() returns false (because device properties have been populated from _DSD), thus the _CRS is never used for the lookup. Fix: Try "cd" for lookup in the _DSD before falling back to using NULL so as to try looking up in the _CRS. I've tested this patch successfully with both Legacy BIOS (that provide only _CRS method) as well as modern BIOS (that provide both _CRS and _DSD). Also the use of "cd" appears to be fairly consistent across other users of this API (other MMC host controller drivers). Link: https://lkml.org/lkml/2018/9/25/1113 Signed-off-by: Rajat Jain Acked-by: Adrian Hunter Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pci-core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 7bfd366d970d..e53333c695b3 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1762,8 +1762,13 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot( device_init_wakeup(&pdev->dev, true); if (slot->cd_idx >= 0) { - ret = mmc_gpiod_request_cd(host->mmc, NULL, slot->cd_idx, + ret = mmc_gpiod_request_cd(host->mmc, "cd", slot->cd_idx, slot->cd_override_level, 0, NULL); + if (ret && ret != -EPROBE_DEFER) + ret = mmc_gpiod_request_cd(host->mmc, NULL, + slot->cd_idx, + slot->cd_override_level, + 0, NULL); if (ret == -EPROBE_DEFER) goto remove; From cce997292a5264c5342c968bbd226d7c365f03d6 Mon Sep 17 00:00:00 2001 From: Connor McAdams Date: Fri, 16 Nov 2018 14:24:55 -0500 Subject: [PATCH 609/726] ALSA: hda/ca0132 - Add new ZxR quirk This patch adds a new PCI subsys ID for the ZxR, as found and tested by other users. Without a way to know if any Z's use it as well, it keeps the quirk of QUIRK_SBZ and goes through the HDA subsys test function. Signed-off-by: Connor McAdams Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index bdbbc51e8d18..f2e620719285 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1177,6 +1177,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ), SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), + SND_PCI_QUIRK(0x1102, 0x0033, "Sound Blaster ZxR", QUIRK_SBZ), SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), From a6b0961b39896a9f9f1350d26d202f078a7d9dbc Mon Sep 17 00:00:00 2001 From: Connor McAdams Date: Fri, 16 Nov 2018 14:24:56 -0500 Subject: [PATCH 610/726] ALSA: hda/ca0132 - fix AE-5 pincfg This patch fixes the pincfg assignment for the AE-5, which was previously using the Recon3D pincfg's by mistake. Fixes: d06feaf02fe6 ("ALSA: hda/ca0132 - Add pincfg for AE-5") Signed-off-by: Connor McAdams Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index f2e620719285..0a567634e5fa 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -8489,7 +8489,7 @@ static void ca0132_config(struct hda_codec *codec) break; case QUIRK_AE5: codec_dbg(codec, "%s: QUIRK_AE5 applied.\n", __func__); - snd_hda_apply_pincfgs(codec, r3di_pincfgs); + snd_hda_apply_pincfgs(codec, ae5_pincfgs); break; } From 21556350ade3cb5d7afecc8b3544e56431d21695 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 14 Nov 2018 19:34:40 +0200 Subject: [PATCH 611/726] drm/i915: Disable LP3 watermarks on all SNB machines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson Acked-by: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com (cherry picked from commit 03981c6ebec4fc7056b9b45f847393aeac90d060) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 245f0022bcfd..3fe358db1276 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2493,6 +2493,9 @@ static uint32_t ilk_compute_pri_wm(const struct intel_crtc_state *cstate, uint32_t method1, method2; int cpp; + if (mem_value == 0) + return U32_MAX; + if (!intel_wm_plane_visible(cstate, pstate)) return 0; @@ -2522,6 +2525,9 @@ static uint32_t ilk_compute_spr_wm(const struct intel_crtc_state *cstate, uint32_t method1, method2; int cpp; + if (mem_value == 0) + return U32_MAX; + if (!intel_wm_plane_visible(cstate, pstate)) return 0; @@ -2545,6 +2551,9 @@ static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate, { int cpp; + if (mem_value == 0) + return U32_MAX; + if (!intel_wm_plane_visible(cstate, pstate)) return 0; @@ -3008,6 +3017,34 @@ static void snb_wm_latency_quirk(struct drm_i915_private *dev_priv) intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency); } +static void snb_wm_lp3_irq_quirk(struct drm_i915_private *dev_priv) +{ + /* + * On some SNB machines (Thinkpad X220 Tablet at least) + * LP3 usage can cause vblank interrupts to be lost. + * The DEIIR bit will go high but it looks like the CPU + * never gets interrupted. + * + * It's not clear whether other interrupt source could + * be affected or if this is somehow limited to vblank + * interrupts only. To play it safe we disable LP3 + * watermarks entirely. + */ + if (dev_priv->wm.pri_latency[3] == 0 && + dev_priv->wm.spr_latency[3] == 0 && + dev_priv->wm.cur_latency[3] == 0) + return; + + dev_priv->wm.pri_latency[3] = 0; + dev_priv->wm.spr_latency[3] = 0; + dev_priv->wm.cur_latency[3] = 0; + + DRM_DEBUG_KMS("LP3 watermarks disabled due to potential for lost interrupts\n"); + intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency); + intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency); + intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency); +} + static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv) { intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency); @@ -3024,8 +3061,10 @@ static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv) intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency); intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency); - if (IS_GEN6(dev_priv)) + if (IS_GEN6(dev_priv)) { snb_wm_latency_quirk(dev_priv); + snb_wm_lp3_irq_quirk(dev_priv); + } } static void skl_setup_wm_latency(struct drm_i915_private *dev_priv) From 5305ec6a27b2dc7398a689e661a4a2e951026f09 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 19 Nov 2018 14:53:07 +0200 Subject: [PATCH 612/726] mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value GLK firmware can indicate that the tuning value will be restored after runtime suspend, but not actually do that. Add a workaround that detects such cases, and lets the driver do re-tuning instead. Reported-by: Anisse Astier Tested-by: Anisse Astier Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pci-core.c | 79 ++++++++++++++++++++++++++++++- 1 file changed, 77 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index e53333c695b3..c4115bae5db1 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -12,6 +12,7 @@ * - JMicron (hardware and technical support) */ +#include #include #include #include @@ -462,6 +463,9 @@ struct intel_host { u32 dsm_fns; int drv_strength; bool d3_retune; + bool rpm_retune_ok; + u32 glk_rx_ctrl1; + u32 glk_tun_val; }; static const guid_t intel_dsm_guid = @@ -791,6 +795,77 @@ cleanup: return ret; } +#ifdef CONFIG_PM +#define GLK_RX_CTRL1 0x834 +#define GLK_TUN_VAL 0x840 +#define GLK_PATH_PLL GENMASK(13, 8) +#define GLK_DLY GENMASK(6, 0) +/* Workaround firmware failing to restore the tuning value */ +static void glk_rpm_retune_wa(struct sdhci_pci_chip *chip, bool susp) +{ + struct sdhci_pci_slot *slot = chip->slots[0]; + struct intel_host *intel_host = sdhci_pci_priv(slot); + struct sdhci_host *host = slot->host; + u32 glk_rx_ctrl1; + u32 glk_tun_val; + u32 dly; + + if (intel_host->rpm_retune_ok || !mmc_can_retune(host->mmc)) + return; + + glk_rx_ctrl1 = sdhci_readl(host, GLK_RX_CTRL1); + glk_tun_val = sdhci_readl(host, GLK_TUN_VAL); + + if (susp) { + intel_host->glk_rx_ctrl1 = glk_rx_ctrl1; + intel_host->glk_tun_val = glk_tun_val; + return; + } + + if (!intel_host->glk_tun_val) + return; + + if (glk_rx_ctrl1 != intel_host->glk_rx_ctrl1) { + intel_host->rpm_retune_ok = true; + return; + } + + dly = FIELD_PREP(GLK_DLY, FIELD_GET(GLK_PATH_PLL, glk_rx_ctrl1) + + (intel_host->glk_tun_val << 1)); + if (dly == FIELD_GET(GLK_DLY, glk_rx_ctrl1)) + return; + + glk_rx_ctrl1 = (glk_rx_ctrl1 & ~GLK_DLY) | dly; + sdhci_writel(host, glk_rx_ctrl1, GLK_RX_CTRL1); + + intel_host->rpm_retune_ok = true; + chip->rpm_retune = true; + mmc_retune_needed(host->mmc); + pr_info("%s: Requiring re-tune after rpm resume", mmc_hostname(host->mmc)); +} + +static void glk_rpm_retune_chk(struct sdhci_pci_chip *chip, bool susp) +{ + if (chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC && + !chip->rpm_retune) + glk_rpm_retune_wa(chip, susp); +} + +static int glk_runtime_suspend(struct sdhci_pci_chip *chip) +{ + glk_rpm_retune_chk(chip, true); + + return sdhci_cqhci_runtime_suspend(chip); +} + +static int glk_runtime_resume(struct sdhci_pci_chip *chip) +{ + glk_rpm_retune_chk(chip, false); + + return sdhci_cqhci_runtime_resume(chip); +} +#endif + #ifdef CONFIG_ACPI static int ni_set_max_freq(struct sdhci_pci_slot *slot) { @@ -879,8 +954,8 @@ static const struct sdhci_pci_fixes sdhci_intel_glk_emmc = { .resume = sdhci_cqhci_resume, #endif #ifdef CONFIG_PM - .runtime_suspend = sdhci_cqhci_runtime_suspend, - .runtime_resume = sdhci_cqhci_runtime_resume, + .runtime_suspend = glk_runtime_suspend, + .runtime_resume = glk_runtime_resume, #endif .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | From 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 14 Nov 2018 13:55:09 -0800 Subject: [PATCH 613/726] HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: # v3.6+ Cc: Jann Horn Cc: Andy Lutomirski Signed-off-by: Eric Biggers Reviewed-by: Jann Horn Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 3c5507313606..051639c09f72 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -722,6 +723,17 @@ static ssize_t uhid_char_write(struct file *file, const char __user *buffer, switch (uhid->input_buf.type) { case UHID_CREATE: + /* + * 'struct uhid_create_req' contains a __user pointer which is + * copied from, so it's unsafe to allow this with elevated + * privileges (e.g. from a setuid binary) or via kernel_write(). + */ + if (file->f_cred != current_cred() || uaccess_kernel()) { + pr_err_once("UHID_CREATE from different security context by process %d (%s), this is not allowed.\n", + task_tgid_vnr(current), current->comm); + ret = -EACCES; + goto unlock; + } ret = uhid_dev_create(uhid, &uhid->input_buf); break; case UHID_CREATE2: From 4d26d1d1e8065bb3326a7c06d5d4698e581443a9 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 14 Nov 2018 14:16:42 +0100 Subject: [PATCH 614/726] Revert "HID: uhid: use strlcpy() instead of strncpy()" This reverts commit 336fd4f5f25157e9e8bd50e898a1bbcd99eaea46. Please note that `strlcpy()` does *NOT* do what you think it does. strlcpy() *ALWAYS* reads the full input string, regardless of the 'length' parameter. That is, if the input is not zero-terminated, strlcpy() will *READ* beyond input boundaries. It does this, because it always returns the size it *would* copy if the target was big enough, not the truncated size it actually copied. The original code was perfectly fine. The hid device is zero-initialized and the strncpy() functions copied up to n-1 characters. The result is always zero-terminated this way. This is the third time someone tried to replace strncpy with strlcpy in this function, and gets it wrong. I now added a comment that should at least make people reconsider. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 051639c09f72..840634e0f1e3 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -497,12 +497,13 @@ static int uhid_dev_create2(struct uhid_device *uhid, goto err_free; } - len = min(sizeof(hid->name), sizeof(ev->u.create2.name)); - strlcpy(hid->name, ev->u.create2.name, len); - len = min(sizeof(hid->phys), sizeof(ev->u.create2.phys)); - strlcpy(hid->phys, ev->u.create2.phys, len); - len = min(sizeof(hid->uniq), sizeof(ev->u.create2.uniq)); - strlcpy(hid->uniq, ev->u.create2.uniq, len); + /* @hid is zero-initialized, strncpy() is correct, strlcpy() not */ + len = min(sizeof(hid->name), sizeof(ev->u.create2.name)) - 1; + strncpy(hid->name, ev->u.create2.name, len); + len = min(sizeof(hid->phys), sizeof(ev->u.create2.phys)) - 1; + strncpy(hid->phys, ev->u.create2.phys, len); + len = min(sizeof(hid->uniq), sizeof(ev->u.create2.uniq)) - 1; + strncpy(hid->uniq, ev->u.create2.uniq, len); hid->ll_driver = &uhid_hid_driver; hid->bus = ev->u.create2.bus; From 25bbe21bf427a81b8e3ccd480ea0e1d940256156 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Nov 2018 15:50:02 -0500 Subject: [PATCH 615/726] dax: Avoid losing wakeup in dax_lock_mapping_entry After calling get_unlocked_entry(), you have to call put_unlocked_entry() to avoid subsequent waiters losing wakeups. Fixes: c2a7d2a11552 ("filesystem-dax: Introduce dax_lock_mapping_entry()") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox --- fs/dax.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/dax.c b/fs/dax.c index cf2394e2bf4b..9bcce89ea18e 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -391,6 +391,7 @@ bool dax_lock_mapping_entry(struct page *page) rcu_read_unlock(); entry = get_unlocked_entry(&xas); xas_unlock_irq(&xas); + put_unlocked_entry(&xas, entry); rcu_read_lock(); continue; } From fffc9a260e38acec3187515738122a3ecb24ac90 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 19 Nov 2018 09:36:29 -0500 Subject: [PATCH 616/726] XArray tests: Add missing locking Lockdep caught me being sloppy in the test suite and failing to lock the XArray appropriately. Reported-by: kernel test robot Signed-off-by: Matthew Wilcox --- lib/test_xarray.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/lib/test_xarray.c b/lib/test_xarray.c index 5f9c14e975a4..0598e86af8fc 100644 --- a/lib/test_xarray.c +++ b/lib/test_xarray.c @@ -208,15 +208,19 @@ static noinline void check_xa_mark_1(struct xarray *xa, unsigned long index) XA_BUG_ON(xa, xa_get_mark(xa, i, XA_MARK_2)); /* We should see two elements in the array */ + rcu_read_lock(); xas_for_each(&xas, entry, ULONG_MAX) seen++; + rcu_read_unlock(); XA_BUG_ON(xa, seen != 2); /* One of which is marked */ xas_set(&xas, 0); seen = 0; + rcu_read_lock(); xas_for_each_marked(&xas, entry, ULONG_MAX, XA_MARK_0) seen++; + rcu_read_unlock(); XA_BUG_ON(xa, seen != 1); } XA_BUG_ON(xa, xa_get_mark(xa, next, XA_MARK_0)); @@ -442,7 +446,9 @@ static noinline void check_multi_store_1(struct xarray *xa, unsigned long index, XA_BUG_ON(xa, xa_load(xa, max) != NULL); XA_BUG_ON(xa, xa_load(xa, min - 1) != NULL); + xas_lock(&xas); XA_BUG_ON(xa, xas_store(&xas, xa_mk_value(min)) != xa_mk_value(index)); + xas_unlock(&xas); XA_BUG_ON(xa, xa_load(xa, min) != xa_mk_value(min)); XA_BUG_ON(xa, xa_load(xa, max - 1) != xa_mk_value(min)); XA_BUG_ON(xa, xa_load(xa, max) != NULL); @@ -458,9 +464,11 @@ static noinline void check_multi_store_2(struct xarray *xa, unsigned long index, XA_STATE(xas, xa, index); xa_store_order(xa, index, order, xa_mk_value(0), GFP_KERNEL); + xas_lock(&xas); XA_BUG_ON(xa, xas_store(&xas, xa_mk_value(1)) != xa_mk_value(0)); XA_BUG_ON(xa, xas.xa_index != index); XA_BUG_ON(xa, xas_store(&xas, NULL) != xa_mk_value(1)); + xas_unlock(&xas); XA_BUG_ON(xa, !xa_empty(xa)); } #endif @@ -1180,10 +1188,12 @@ static noinline void check_account(struct xarray *xa) XA_STATE(xas, xa, 1 << order); xa_store_order(xa, 0, order, xa, GFP_KERNEL); + rcu_read_lock(); xas_load(&xas); XA_BUG_ON(xa, xas.xa_node->count == 0); XA_BUG_ON(xa, xas.xa_node->count > (1 << order)); XA_BUG_ON(xa, xas.xa_node->nr_values != 0); + rcu_read_unlock(); xa_store_order(xa, 1 << order, order, xa_mk_value(1 << order), GFP_KERNEL); From 385a4886778f6d6e61eff1d4d295af332d7130e1 Mon Sep 17 00:00:00 2001 From: Rodrigo Rivas Costa Date: Sun, 14 Oct 2018 19:36:43 +0200 Subject: [PATCH 617/726] HID: steam: remove input device when a hid client is running. Previously, when a HID client such as the Steam Client was running, this driver disabled its input device to avoid doubling the input events. While it worked mostly fine, some games got confused by the idle gamepad, and switched to two player mode, or asked the user to choose which gamepad to use. Other games just crashed, probably a bug in Unity [1]. With this commit, when a HID client starts, the input device is removed; when the HID client ends the input device is recreated. [1]: https://github.com/ValveSoftware/steam-for-linux/issues/5645 Signed-off-by: Rodrigo Rivas Costa Signed-off-by: Jiri Kosina --- drivers/hid/hid-steam.c | 154 +++++++++++++++++++++++----------------- 1 file changed, 90 insertions(+), 64 deletions(-) diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index 0422ec2b13d2..dc4128bfe2ca 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -23,8 +23,9 @@ * In order to avoid breaking them this driver creates a layered hidraw device, * so it can detect when the client is running and then: * - it will not send any command to the controller. - * - this input device will be disabled, to avoid double input of the same + * - this input device will be removed, to avoid double input of the same * user action. + * When the client is closed, this input device will be created again. * * For additional functions, such as changing the right-pad margin or switching * the led, you can use the user-space tool at: @@ -113,7 +114,7 @@ struct steam_device { spinlock_t lock; struct hid_device *hdev, *client_hdev; struct mutex mutex; - bool client_opened, input_opened; + bool client_opened; struct input_dev __rcu *input; unsigned long quirks; struct work_struct work_connect; @@ -279,18 +280,6 @@ static void steam_set_lizard_mode(struct steam_device *steam, bool enable) } } -static void steam_update_lizard_mode(struct steam_device *steam) -{ - mutex_lock(&steam->mutex); - if (!steam->client_opened) { - if (steam->input_opened) - steam_set_lizard_mode(steam, false); - else - steam_set_lizard_mode(steam, lizard_mode); - } - mutex_unlock(&steam->mutex); -} - static int steam_input_open(struct input_dev *dev) { struct steam_device *steam = input_get_drvdata(dev); @@ -301,7 +290,6 @@ static int steam_input_open(struct input_dev *dev) return ret; mutex_lock(&steam->mutex); - steam->input_opened = true; if (!steam->client_opened && lizard_mode) steam_set_lizard_mode(steam, false); mutex_unlock(&steam->mutex); @@ -313,7 +301,6 @@ static void steam_input_close(struct input_dev *dev) struct steam_device *steam = input_get_drvdata(dev); mutex_lock(&steam->mutex); - steam->input_opened = false; if (!steam->client_opened && lizard_mode) steam_set_lizard_mode(steam, true); mutex_unlock(&steam->mutex); @@ -400,7 +387,7 @@ static int steam_battery_register(struct steam_device *steam) return 0; } -static int steam_register(struct steam_device *steam) +static int steam_input_register(struct steam_device *steam) { struct hid_device *hdev = steam->hdev; struct input_dev *input; @@ -414,17 +401,6 @@ static int steam_register(struct steam_device *steam) return 0; } - /* - * Unlikely, but getting the serial could fail, and it is not so - * important, so make up a serial number and go on. - */ - if (steam_get_serial(steam) < 0) - strlcpy(steam->serial_no, "XXXXXXXXXX", - sizeof(steam->serial_no)); - - hid_info(hdev, "Steam Controller '%s' connected", - steam->serial_no); - input = input_allocate_device(); if (!input) return -ENOMEM; @@ -492,11 +468,6 @@ static int steam_register(struct steam_device *steam) goto input_register_fail; rcu_assign_pointer(steam->input, input); - - /* ignore battery errors, we can live without it */ - if (steam->quirks & STEAM_QUIRK_WIRELESS) - steam_battery_register(steam); - return 0; input_register_fail: @@ -504,27 +475,88 @@ input_register_fail: return ret; } -static void steam_unregister(struct steam_device *steam) +static void steam_input_unregister(struct steam_device *steam) { struct input_dev *input; + rcu_read_lock(); + input = rcu_dereference(steam->input); + rcu_read_unlock(); + if (!input) + return; + RCU_INIT_POINTER(steam->input, NULL); + synchronize_rcu(); + input_unregister_device(input); +} + +static void steam_battery_unregister(struct steam_device *steam) +{ struct power_supply *battery; rcu_read_lock(); - input = rcu_dereference(steam->input); battery = rcu_dereference(steam->battery); rcu_read_unlock(); - if (battery) { - RCU_INIT_POINTER(steam->battery, NULL); - synchronize_rcu(); - power_supply_unregister(battery); + if (!battery) + return; + RCU_INIT_POINTER(steam->battery, NULL); + synchronize_rcu(); + power_supply_unregister(battery); +} + +static int steam_register(struct steam_device *steam) +{ + int ret; + + /* + * This function can be called several times in a row with the + * wireless adaptor, without steam_unregister() between them, because + * another client send a get_connection_status command, for example. + * The battery and serial number are set just once per device. + */ + if (!steam->serial_no[0]) { + /* + * Unlikely, but getting the serial could fail, and it is not so + * important, so make up a serial number and go on. + */ + if (steam_get_serial(steam) < 0) + strlcpy(steam->serial_no, "XXXXXXXXXX", + sizeof(steam->serial_no)); + + hid_info(steam->hdev, "Steam Controller '%s' connected", + steam->serial_no); + + /* ignore battery errors, we can live without it */ + if (steam->quirks & STEAM_QUIRK_WIRELESS) + steam_battery_register(steam); + + mutex_lock(&steam_devices_lock); + list_add(&steam->list, &steam_devices); + mutex_unlock(&steam_devices_lock); } - if (input) { - RCU_INIT_POINTER(steam->input, NULL); - synchronize_rcu(); + + mutex_lock(&steam->mutex); + if (!steam->client_opened) { + steam_set_lizard_mode(steam, lizard_mode); + ret = steam_input_register(steam); + } else { + ret = 0; + } + mutex_unlock(&steam->mutex); + + return ret; +} + +static void steam_unregister(struct steam_device *steam) +{ + steam_battery_unregister(steam); + steam_input_unregister(steam); + if (steam->serial_no[0]) { hid_info(steam->hdev, "Steam Controller '%s' disconnected", steam->serial_no); - input_unregister_device(input); + mutex_lock(&steam_devices_lock); + list_del(&steam->list); + mutex_unlock(&steam_devices_lock); + steam->serial_no[0] = 0; } } @@ -600,6 +632,9 @@ static int steam_client_ll_open(struct hid_device *hdev) mutex_lock(&steam->mutex); steam->client_opened = true; mutex_unlock(&steam->mutex); + + steam_input_unregister(steam); + return ret; } @@ -609,13 +644,13 @@ static void steam_client_ll_close(struct hid_device *hdev) mutex_lock(&steam->mutex); steam->client_opened = false; - if (steam->input_opened) - steam_set_lizard_mode(steam, false); - else - steam_set_lizard_mode(steam, lizard_mode); mutex_unlock(&steam->mutex); hid_hw_close(steam->hdev); + if (steam->connected) { + steam_set_lizard_mode(steam, lizard_mode); + steam_input_register(steam); + } } static int steam_client_ll_raw_request(struct hid_device *hdev, @@ -744,11 +779,6 @@ static int steam_probe(struct hid_device *hdev, } } - mutex_lock(&steam_devices_lock); - steam_update_lizard_mode(steam); - list_add(&steam->list, &steam_devices); - mutex_unlock(&steam_devices_lock); - return 0; hid_hw_open_fail: @@ -774,10 +804,6 @@ static void steam_remove(struct hid_device *hdev) return; } - mutex_lock(&steam_devices_lock); - list_del(&steam->list); - mutex_unlock(&steam_devices_lock); - hid_destroy_device(steam->client_hdev); steam->client_opened = false; cancel_work_sync(&steam->work_connect); @@ -792,12 +818,14 @@ static void steam_remove(struct hid_device *hdev) static void steam_do_connect_event(struct steam_device *steam, bool connected) { unsigned long flags; + bool changed; spin_lock_irqsave(&steam->lock, flags); + changed = steam->connected != connected; steam->connected = connected; spin_unlock_irqrestore(&steam->lock, flags); - if (schedule_work(&steam->work_connect) == 0) + if (changed && schedule_work(&steam->work_connect) == 0) dbg_hid("%s: connected=%d event already queued\n", __func__, connected); } @@ -1019,13 +1047,8 @@ static int steam_raw_event(struct hid_device *hdev, return 0; rcu_read_lock(); input = rcu_dereference(steam->input); - if (likely(input)) { + if (likely(input)) steam_do_input_event(steam, input, data); - } else { - dbg_hid("%s: input data without connect event\n", - __func__); - steam_do_connect_event(steam, true); - } rcu_read_unlock(); break; case STEAM_EV_CONNECT: @@ -1074,7 +1097,10 @@ static int steam_param_set_lizard_mode(const char *val, mutex_lock(&steam_devices_lock); list_for_each_entry(steam, &steam_devices, list) { - steam_update_lizard_mode(steam); + mutex_lock(&steam->mutex); + if (!steam->client_opened) + steam_set_lizard_mode(steam, lizard_mode); + mutex_unlock(&steam->mutex); } mutex_unlock(&steam_devices_lock); return 0; From 12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 14 Nov 2018 05:35:20 +0000 Subject: [PATCH 618/726] HID: multitouch: Add pointstick support for Cirque Touchpad Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse. Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-multitouch.c | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3004322eb8e4..3917fc4cf96a 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -275,6 +275,9 @@ #define USB_VENDOR_ID_CIDC 0x1677 +#define I2C_VENDOR_ID_CIRQUE 0x0488 +#define I2C_PRODUCT_ID_CIRQUE_121F 0x121F + #define USB_VENDOR_ID_CJTOUCH 0x24b8 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0020 0x0020 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0040 0x0040 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index f7c6de2b6730..dca0a3a90fb8 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1814,6 +1814,12 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, + /* Cirque devices */ + { .driver_data = MT_CLS_WIN_8_DUAL, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + I2C_VENDOR_ID_CIRQUE, + I2C_PRODUCT_ID_CIRQUE_121F) }, + /* CJTouch panels */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_CJTOUCH, From 86c31524b27c7e686841dd4a79eda95cfd989f16 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 14 Nov 2018 07:24:57 +0000 Subject: [PATCH 619/726] HID: i2c-hid: Disable runtime PM for LG touchscreen LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/i2c-hid/i2c-hid-core.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3917fc4cf96a..2114ac647bef 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -710,6 +710,7 @@ #define USB_VENDOR_ID_LG 0x1fd2 #define USB_DEVICE_ID_LG_MULTITOUCH 0x0064 #define USB_DEVICE_ID_LG_MELFAS_MT 0x6007 +#define I2C_DEVICE_ID_LG_8001 0x8001 #define USB_VENDOR_ID_LOGITECH 0x046d #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 3cde7c1b9c33..8555ce7e737b 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -177,6 +177,8 @@ static const struct i2c_hid_quirks { I2C_HID_QUIRK_NO_RUNTIME_PM }, { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33, I2C_HID_QUIRK_DELAY_AFTER_SLEEP }, + { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001, + I2C_HID_QUIRK_NO_RUNTIME_PM }, { 0, 0 } }; From 7e241f647dc7087a0401418a187f3f5b527cc690 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Thu, 8 Nov 2018 15:55:37 +0100 Subject: [PATCH 620/726] libceph: fall back to sendmsg for slab pages skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Ilya Dryomov --- net/ceph/messenger.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 57fcc6b4bf6e..2f126eff275d 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -580,9 +580,15 @@ static int ceph_tcp_sendpage(struct socket *sock, struct page *page, struct bio_vec bvec; int ret; - /* sendpage cannot properly handle pages with page_count == 0, - * we need to fallback to sendmsg if that's the case */ - if (page_count(page) >= 1) + /* + * sendpage cannot properly handle pages with page_count == 0, + * we need to fall back to sendmsg if that's the case. + * + * Same goes for slab pages: skb_can_coalesce() allows + * coalescing neighboring slab objects into a single frag which + * triggers one of hardened usercopy checks. + */ + if (page_count(page) >= 1 && !PageSlab(page)) return __ceph_tcp_sendpage(sock, page, offset, size, more); bvec.bv_page = page; From a36b5444b1ec79ed5fedd12295626c05b4f788eb Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 19 Nov 2018 08:01:03 +0100 Subject: [PATCH 621/726] MAINTAINERS: Add myself as third phylib maintainer Add myself as third phylib maintainer. Signed-off-by: Heiner Kallweit Acked-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 77b11742785d..d258515ac117 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5534,6 +5534,7 @@ F: net/bridge/ ETHERNET PHY LIBRARY M: Andrew Lunn M: Florian Fainelli +M: Heiner Kallweit L: netdev@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-bus-mdio From 02968ccf0125d39b08ecef5946300a8a873c0942 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 18 Nov 2018 15:07:38 +0800 Subject: [PATCH 622/726] sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit Now sctp increases sk_wmem_alloc by 1 when doing set_owner_w for the skb allocked in sctp_packet_transmit and decreases by 1 when freeing this skb. But when this skb goes through networking stack, some subcomponents might change skb->truesize and add the same amount on sk_wmem_alloc. However sctp doesn't know the amount to decrease by, it would cause a leak on sk->sk_wmem_alloc and the sock can never be freed. Xiumei found this issue when it hit esp_output_head() by using sctp over ipsec, where skb->truesize is added and so is sk->sk_wmem_alloc. Since sctp has used sk_wmem_queued to count for writable space since Commit cd305c74b0f8 ("sctp: use sk_wmem_queued to check for writable space"), it's ok to fix it by counting sk_wmem_alloc by skb truesize in sctp_packet_transmit. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: Xiumei Mu Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/output.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/net/sctp/output.c b/net/sctp/output.c index 67939ad99c01..88dfa6ae1fb4 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -396,25 +396,6 @@ finish: return retval; } -static void sctp_packet_release_owner(struct sk_buff *skb) -{ - sk_free(skb->sk); -} - -static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk) -{ - skb_orphan(skb); - skb->sk = sk; - skb->destructor = sctp_packet_release_owner; - - /* - * The data chunks have already been accounted for in sctp_sendmsg(), - * therefore only reserve a single byte to keep socket around until - * the packet has been transmitted. - */ - refcount_inc(&sk->sk_wmem_alloc); -} - static void sctp_packet_gso_append(struct sk_buff *head, struct sk_buff *skb) { if (SCTP_OUTPUT_CB(head)->last == head) @@ -601,7 +582,7 @@ int sctp_packet_transmit(struct sctp_packet *packet, gfp_t gfp) if (!head) goto out; skb_reserve(head, packet->overhead + MAX_HEADER); - sctp_packet_set_owner_w(head, sk); + skb_set_owner_w(head, sk); /* set sctp header */ sh = skb_push(head, sizeof(struct sctphdr)); From cc3ccf26f0649089b3a34a2781977755ea36e72c Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 18 Nov 2018 15:21:53 +0800 Subject: [PATCH 623/726] sctp: not allow to set asoc prsctp_enable by sockopt As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26fce2 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by: Ying Xu Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/socket.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 739f3e50120d..bf618d1b41fd 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3940,32 +3940,16 @@ static int sctp_setsockopt_pr_supported(struct sock *sk, unsigned int optlen) { struct sctp_assoc_value params; - struct sctp_association *asoc; - int retval = -EINVAL; if (optlen != sizeof(params)) - goto out; + return -EINVAL; - if (copy_from_user(¶ms, optval, optlen)) { - retval = -EFAULT; - goto out; - } + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; - asoc = sctp_id2assoc(sk, params.assoc_id); - if (asoc) { - asoc->prsctp_enable = !!params.assoc_value; - } else if (!params.assoc_id) { - struct sctp_sock *sp = sctp_sk(sk); + sctp_sk(sk)->ep->prsctp_enable = !!params.assoc_value; - sp->ep->prsctp_enable = !!params.assoc_value; - } else { - goto out; - } - - retval = 0; - -out: - return retval; + return 0; } static int sctp_setsockopt_default_prinfo(struct sock *sk, From 69fec325a64383667b8a35df5d48d6ce52fb2782 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 18 Nov 2018 16:14:47 +0800 Subject: [PATCH 624/726] Revert "sctp: remove sctp_transport_pmtu_check" This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a. The dst's mtu in transport can be updated by a non sctp place like in xfrm where the MTU information didn't get synced between asoc, transport and dst, so it is still needed to do the pmtu check in sctp_packet_config. Acked-by: Neil Horman Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 12 ++++++++++++ net/sctp/output.c | 3 +++ 2 files changed, 15 insertions(+) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 8c2caa370e0f..ab9242e51d9e 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -608,4 +608,16 @@ static inline __u32 sctp_dst_mtu(const struct dst_entry *dst) SCTP_DEFAULT_MINSEGMENT)); } +static inline bool sctp_transport_pmtu_check(struct sctp_transport *t) +{ + __u32 pmtu = sctp_dst_mtu(t->dst); + + if (t->pathmtu == pmtu) + return true; + + t->pathmtu = pmtu; + + return false; +} + #endif /* __net_sctp_h__ */ diff --git a/net/sctp/output.c b/net/sctp/output.c index 88dfa6ae1fb4..b0e74a3e77ec 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -118,6 +118,9 @@ void sctp_packet_config(struct sctp_packet *packet, __u32 vtag, sctp_transport_route(tp, NULL, sp); if (asoc->param_flags & SPP_PMTUD_ENABLE) sctp_assoc_sync_pmtu(asoc); + } else if (!sctp_transport_pmtu_check(tp)) { + if (asoc->param_flags & SPP_PMTUD_ENABLE) + sctp_assoc_sync_pmtu(asoc); } if (asoc->pmtu_pending) { From 919a52fc4ca137c871f295224507fa3401e08472 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 20 Jul 2018 11:37:25 -0400 Subject: [PATCH 625/726] drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset On Vega20 and other pre-production GPUs, powerplay is not enabled yet. Check for NULL pointers before calling pp_funcs function pointers. Also affects Kaveri. CC: Joerg Roedel Signed-off-by: Felix Kuehling Reviewed-by: Alex Deucher Tested-by: Joerg Roedel Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c index c31a8849e9f8..1580ec60b89f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c @@ -501,8 +501,11 @@ void amdgpu_amdkfd_set_compute_idle(struct kgd_dev *kgd, bool idle) { struct amdgpu_device *adev = (struct amdgpu_device *)kgd; - amdgpu_dpm_switch_power_profile(adev, - PP_SMC_POWER_PROFILE_COMPUTE, !idle); + if (adev->powerplay.pp_funcs && + adev->powerplay.pp_funcs->switch_power_profile) + amdgpu_dpm_switch_power_profile(adev, + PP_SMC_POWER_PROFILE_COMPUTE, + !idle); } bool amdgpu_amdkfd_is_kfd_vmid(struct amdgpu_device *adev, u32 vmid) From 009dd011762925e5e03a59282b1785214f8470e0 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 19 Nov 2018 12:03:24 +0800 Subject: [PATCH 626/726] drm/amd/powerplay: disable Vega20 DS related features Disable these features on Vega20 for now. Signed-off-by: Evan Quan Acked-by: Feifei Xu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 99861f32b1f9..397ee88fec03 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -75,7 +75,17 @@ static void vega20_set_default_registry_data(struct pp_hwmgr *hwmgr) data->phy_clk_quad_eqn_b = PPREGKEY_VEGA20QUADRATICEQUATION_DFLT; data->phy_clk_quad_eqn_c = PPREGKEY_VEGA20QUADRATICEQUATION_DFLT; - data->registry_data.disallowed_features = 0x0; + /* + * Disable the following features for now: + * GFXCLK DS + * SOCLK DS + * LCLK DS + * DCEFCLK DS + * FCLK DS + * MP1CLK DS + * MP0CLK DS + */ + data->registry_data.disallowed_features = 0xE0041C00; data->registry_data.od_state_in_dc_support = 0; data->registry_data.thermal_support = 1; data->registry_data.skip_baco_hardware = 0; From 8d4d7c58994759bbd9f4fec32d88bf0e0b89302e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 19 Nov 2018 12:55:12 +0100 Subject: [PATCH 627/726] drm/amdgpu: Add missing firmware entry for HAINAN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to lack of MODULE_FIRMWARE() with hainan_mc.bin, the driver doesn't work properly in initrd. Let's add it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1116239 Fixes: 8eaf2b1faaf4 ("drm/amdgpu: switch firmware path for SI parts") Cc: Reviewed-by: Christian König Signed-off-by: Takashi Iwai Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c index e1c2b4e9c7b2..73ad02aea2b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c @@ -46,6 +46,7 @@ MODULE_FIRMWARE("amdgpu/tahiti_mc.bin"); MODULE_FIRMWARE("amdgpu/pitcairn_mc.bin"); MODULE_FIRMWARE("amdgpu/verde_mc.bin"); MODULE_FIRMWARE("amdgpu/oland_mc.bin"); +MODULE_FIRMWARE("amdgpu/hainan_mc.bin"); MODULE_FIRMWARE("amdgpu/si58_mc.bin"); #define MC_SEQ_MISC0__MT__MASK 0xf0000000 From a4233cc944d1b7125d906f1fa276bda3df48df0c Mon Sep 17 00:00:00 2001 From: "Greathouse, Joseph" Date: Mon, 19 Nov 2018 16:59:28 +0000 Subject: [PATCH 628/726] drm/amd/pp: handle negative values when reading OD Reading the sysfs files pp_sclk_od and pp_mclk_od return the percentage difference between the VBIOS-provided default frequency and the current (possibly user-set) frequency in the highest SCLK and MCLK DPM states, respectively. Writing to these files provides an easy mechanism for setting a higher-than-default maximum frequency. We normally only allow values >= 0 to be written here. However, with the addition of pp_od_clk_voltage, we now allow users to set custom DPM tables. If they then set the maximum DPM state to something less than the default, later reads of pp_*_od should return a negative value. The highest DPM state is now less than the VBIOS-provided default, so the percentage is negative. The math to calculate this was originally performed with unsigned values, meaning reads that should return negative values returned meaningless data. This patch corrects that issue and normalizes how all of the calculations are done across the various hwmgr types. Acked-by: Alex Deucher Signed-off-by: Joseph Greathouse Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 20 +++++++-------- .../drm/amd/powerplay/hwmgr/vega10_hwmgr.c | 25 ++++++++----------- .../drm/amd/powerplay/hwmgr/vega12_hwmgr.c | 23 ++++++++--------- .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 18 +++++++------ 4 files changed, 40 insertions(+), 46 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index ed35ec0341e6..88f6b35ea6fe 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4525,12 +4525,12 @@ static int smu7_get_sclk_od(struct pp_hwmgr *hwmgr) struct smu7_single_dpm_table *sclk_table = &(data->dpm_table.sclk_table); struct smu7_single_dpm_table *golden_sclk_table = &(data->golden_dpm_table.sclk_table); - int value; + int value = sclk_table->dpm_levels[sclk_table->count - 1].value; + int golden_value = golden_sclk_table->dpm_levels + [golden_sclk_table->count - 1].value; - value = (sclk_table->dpm_levels[sclk_table->count - 1].value - - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value) * - 100 / - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); return value; } @@ -4567,12 +4567,12 @@ static int smu7_get_mclk_od(struct pp_hwmgr *hwmgr) struct smu7_single_dpm_table *mclk_table = &(data->dpm_table.mclk_table); struct smu7_single_dpm_table *golden_mclk_table = &(data->golden_dpm_table.mclk_table); - int value; + int value = mclk_table->dpm_levels[mclk_table->count - 1].value; + int golden_value = golden_mclk_table->dpm_levels + [golden_mclk_table->count - 1].value; - value = (mclk_table->dpm_levels[mclk_table->count - 1].value - - golden_mclk_table->dpm_levels[golden_mclk_table->count - 1].value) * - 100 / - golden_mclk_table->dpm_levels[golden_mclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); return value; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c index 8c4db86bb4b7..e2bc6e0c229f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c @@ -4522,15 +4522,13 @@ static int vega10_get_sclk_od(struct pp_hwmgr *hwmgr) struct vega10_single_dpm_table *sclk_table = &(data->dpm_table.gfx_table); struct vega10_single_dpm_table *golden_sclk_table = &(data->golden_dpm_table.gfx_table); - int value; - - value = (sclk_table->dpm_levels[sclk_table->count - 1].value - - golden_sclk_table->dpm_levels - [golden_sclk_table->count - 1].value) * - 100 / - golden_sclk_table->dpm_levels + int value = sclk_table->dpm_levels[sclk_table->count - 1].value; + int golden_value = golden_sclk_table->dpm_levels [golden_sclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); + return value; } @@ -4575,16 +4573,13 @@ static int vega10_get_mclk_od(struct pp_hwmgr *hwmgr) struct vega10_single_dpm_table *mclk_table = &(data->dpm_table.mem_table); struct vega10_single_dpm_table *golden_mclk_table = &(data->golden_dpm_table.mem_table); - int value; - - value = (mclk_table->dpm_levels - [mclk_table->count - 1].value - - golden_mclk_table->dpm_levels - [golden_mclk_table->count - 1].value) * - 100 / - golden_mclk_table->dpm_levels + int value = mclk_table->dpm_levels[mclk_table->count - 1].value; + int golden_value = golden_mclk_table->dpm_levels [golden_mclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); + return value; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c index 74bc37308dc0..54364444ecd1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c @@ -2243,12 +2243,12 @@ static int vega12_get_sclk_od(struct pp_hwmgr *hwmgr) struct vega12_single_dpm_table *sclk_table = &(data->dpm_table.gfx_table); struct vega12_single_dpm_table *golden_sclk_table = &(data->golden_dpm_table.gfx_table); - int value; + int value = sclk_table->dpm_levels[sclk_table->count - 1].value; + int golden_value = golden_sclk_table->dpm_levels + [golden_sclk_table->count - 1].value; - value = (sclk_table->dpm_levels[sclk_table->count - 1].value - - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value) * - 100 / - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); return value; } @@ -2264,16 +2264,13 @@ static int vega12_get_mclk_od(struct pp_hwmgr *hwmgr) struct vega12_single_dpm_table *mclk_table = &(data->dpm_table.mem_table); struct vega12_single_dpm_table *golden_mclk_table = &(data->golden_dpm_table.mem_table); - int value; - - value = (mclk_table->dpm_levels - [mclk_table->count - 1].value - - golden_mclk_table->dpm_levels - [golden_mclk_table->count - 1].value) * - 100 / - golden_mclk_table->dpm_levels + int value = mclk_table->dpm_levels[mclk_table->count - 1].value; + int golden_value = golden_mclk_table->dpm_levels [golden_mclk_table->count - 1].value; + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); + return value; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 397ee88fec03..b4eadd47f3a4 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -1323,12 +1323,13 @@ static int vega20_get_sclk_od( &(data->dpm_table.gfx_table); struct vega20_single_dpm_table *golden_sclk_table = &(data->golden_dpm_table.gfx_table); - int value; + int value = sclk_table->dpm_levels[sclk_table->count - 1].value; + int golden_value = golden_sclk_table->dpm_levels + [golden_sclk_table->count - 1].value; /* od percentage */ - value = DIV_ROUND_UP((sclk_table->dpm_levels[sclk_table->count - 1].value - - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value) * 100, - golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value); + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); return value; } @@ -1368,12 +1369,13 @@ static int vega20_get_mclk_od( &(data->dpm_table.mem_table); struct vega20_single_dpm_table *golden_mclk_table = &(data->golden_dpm_table.mem_table); - int value; + int value = mclk_table->dpm_levels[mclk_table->count - 1].value; + int golden_value = golden_mclk_table->dpm_levels + [golden_mclk_table->count - 1].value; /* od percentage */ - value = DIV_ROUND_UP((mclk_table->dpm_levels[mclk_table->count - 1].value - - golden_mclk_table->dpm_levels[golden_mclk_table->count - 1].value) * 100, - golden_mclk_table->dpm_levels[golden_mclk_table->count - 1].value); + value -= golden_value; + value = DIV_ROUND_UP(value * 100, golden_value); return value; } From a6a66f80c85e8e20573ca03fabf32445954a88d5 Mon Sep 17 00:00:00 2001 From: Thor Thayer Date: Fri, 16 Nov 2018 08:25:49 -0600 Subject: [PATCH 629/726] mtd: spi-nor: Fix Cadence QSPI page fault kernel panic The current Cadence QSPI driver caused a kernel panic sporadically when writing to QSPI. The problem was caused by writing more bytes than needed because the QSPI operated on 4 bytes at a time. [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 [ 11.209254] pgd = e463054d [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM [ 11.222797] Modules linked in: [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f [ 11.235796] Hardware name: Altera SOCFPGA Arria10 [ 11.240487] PC is at __raw_writesl+0x70/0xd4 [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc On a page boundary limit the number of bytes copied from the tx buffer to remain within the page. This patch uses a temporary buffer to hold the 4 bytes to write and then copies only the bytes required from the tx buffer. Reported-by: Adrian Amborzewicz Signed-off-by: Thor Thayer Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/cadence-quadspi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index d846428ef038..04cedd3a2bf6 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -644,9 +644,23 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, ndelay(cqspi->wr_delay); while (remaining > 0) { + size_t write_words, mod_bytes; + write_bytes = remaining > page_size ? page_size : remaining; - iowrite32_rep(cqspi->ahb_base, txbuf, - DIV_ROUND_UP(write_bytes, 4)); + write_words = write_bytes / 4; + mod_bytes = write_bytes % 4; + /* Write 4 bytes at a time then single bytes. */ + if (write_words) { + iowrite32_rep(cqspi->ahb_base, txbuf, write_words); + txbuf += (write_words * 4); + } + if (mod_bytes) { + unsigned int temp = 0xFFFFFFFF; + + memcpy(&temp, txbuf, mod_bytes); + iowrite32(temp, cqspi->ahb_base); + txbuf += mod_bytes; + } if (!wait_for_completion_timeout(&cqspi->transfer_complete, msecs_to_jiffies(CQSPI_TIMEOUT_MS))) { @@ -655,7 +669,6 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, goto failwr; } - txbuf += write_bytes; remaining -= write_bytes; if (remaining > 0) From 59e4293149106fb92530f8e56fa3992d8548c5e6 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Wed, 14 Nov 2018 07:46:40 -0800 Subject: [PATCH 630/726] xfs: fix shared extent data corruption due to missing cow reservation Page writeback indirectly handles shared extents via the existence of overlapping COW fork blocks. If COW fork blocks exist, writeback always performs the associated copy-on-write regardless if the underlying blocks are actually shared. If the blocks are shared, then overlapping COW fork blocks must always exist. fstests shared/010 reproduces a case where a buffered write occurs over a shared block without performing the requisite COW fork reservation. This ultimately causes writeback to the shared extent and data corruption that is detected across md5 checks of the filesystem across a mount cycle. The problem occurs when a buffered write lands over a shared extent that crosses an extent size hint boundary and that also happens to have a partial COW reservation that doesn't cover the start and end blocks of the data fork extent. For example, a buffered write occurs across the file offset (in FSB units) range of [29, 57]. A shared extent exists at blocks [29, 35] and COW reservation already exists at blocks [32, 34]. After accommodating a COW extent size hint of 32 blocks and the existing reservation at offset 32, xfs_reflink_reserve_cow() allocates 32 blocks of reservation at offset 0 and returns with COW reservation across the range of [0, 34]. The associated data fork extent is still [29, 35], however, which isn't fully covered by the COW reservation. This leads to a buffered write at file offset 35 over a shared extent without associated COW reservation. Writeback eventually kicks in, performs an overwrite of the underlying shared block and causes the associated data corruption. Update xfs_reflink_reserve_cow() to accommodate the fact that a delalloc allocation request may not fully cover the extent in the data fork. Trim the data fork extent appropriately, just as is done for shared extent boundaries and/or existing COW reservations that happen to overlap the start of the data fork extent. This prevents shared/010 failures due to data corruption on reflink enabled filesystems. Signed-off-by: Brian Foster Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_reflink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c index ecdb086bc23e..c56bdbfcf7ae 100644 --- a/fs/xfs/xfs_reflink.c +++ b/fs/xfs/xfs_reflink.c @@ -296,6 +296,7 @@ xfs_reflink_reserve_cow( if (error) return error; + xfs_trim_extent(imap, got.br_startoff, got.br_blockcount); trace_xfs_reflink_cow_alloc(ip, &got); return 0; } From da034bcc6aaaf2a6ba6c5b5e63565c5ef4816a0e Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 14 Nov 2018 21:48:18 -0800 Subject: [PATCH 631/726] xfs: make xfs_file_remap_range() static xfs_file_remap_range() is only used in fs/xfs/xfs_file.c, so make it static. This addresses a gcc warning when -Wmissing-prototypes is enabled. Signed-off-by: Eric Biggers Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index 53c9ab8fb777..e47425071e65 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -920,7 +920,7 @@ out_unlock: } -loff_t +STATIC loff_t xfs_file_remap_range( struct file *file_in, loff_t pos_in, From f2b18732ee9863ac036759baf616ffa03c252ed5 Mon Sep 17 00:00:00 2001 From: Raed Salem Date: Thu, 18 Oct 2018 08:55:21 +0300 Subject: [PATCH 632/726] net/mlx5: IPSec, Fix the SA context hash key The commit "net/mlx5: Refactor accel IPSec code" introduced a bug where asynchronous short time change in hash key value by create/release SA context might happen during an asynchronous hash resize operation this could cause a subsequent remove SA context operation to fail as the key value used during resize is not the same key value used when remove SA context operation is invoked. This commit fixes the bug by defining the SA context hash key such that it includes only fields that never change during the lifetime of the SA context object. Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code") Signed-off-by: Raed Salem Reviewed-by: Aviad Yehezkel Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c index 515e3d6de051..5a22c5874f3b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c @@ -83,8 +83,14 @@ struct mlx5_fpga_ipsec_rule { }; static const struct rhashtable_params rhash_sa = { - .key_len = FIELD_SIZEOF(struct mlx5_fpga_ipsec_sa_ctx, hw_sa), - .key_offset = offsetof(struct mlx5_fpga_ipsec_sa_ctx, hw_sa), + /* Keep out "cmd" field from the key as it's + * value is not constant during the lifetime + * of the key object. + */ + .key_len = FIELD_SIZEOF(struct mlx5_fpga_ipsec_sa_ctx, hw_sa) - + FIELD_SIZEOF(struct mlx5_ifc_fpga_ipsec_sa_v1, cmd), + .key_offset = offsetof(struct mlx5_fpga_ipsec_sa_ctx, hw_sa) + + FIELD_SIZEOF(struct mlx5_ifc_fpga_ipsec_sa_v1, cmd), .head_offset = offsetof(struct mlx5_fpga_ipsec_sa_ctx, hash), .automatic_shrinking = true, .min_size = 1, From acf3766b36d8e59ecbc307894c6d05703ee48014 Mon Sep 17 00:00:00 2001 From: Denis Drozdov Date: Thu, 27 Sep 2018 14:17:54 +0300 Subject: [PATCH 633/726] net/mlx5e: IPoIB, Reset QP after channels are closed The mlx5e channels should be closed before mlx5i_uninit_underlay_qp puts the QP into RST (reset) state during mlx5i_close. Currently QP state incorrectly set to RST before channels got deactivated and closed, since mlx5_post_send request expects QP in RTS (Ready To Send) state. The fix is to keep QP in RTS state until mlx5e channels get closed and to reset QP afterwards. Also this fix is simply correct in order to keep the open/close flow symmetric, i.e mlx5i_init_underlay_qp() is called first thing at open, the correct thing to do is to call mlx5i_uninit_underlay_qp() last thing at close, which is exactly what this patch is doing. Fixes: dae37456c8ac ("net/mlx5: Support for attaching multiple underlay QPs to root flow table") Signed-off-by: Denis Drozdov Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index b59953daf8b4..11dabd62e2c7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -560,9 +560,9 @@ static int mlx5i_close(struct net_device *netdev) netif_carrier_off(epriv->netdev); mlx5_fs_remove_rx_underlay_qpn(mdev, ipriv->qp.qpn); - mlx5i_uninit_underlay_qp(epriv); mlx5e_deactivate_priv_channels(epriv); mlx5e_close_channels(&epriv->channels); + mlx5i_uninit_underlay_qp(epriv); unlock: mutex_unlock(&epriv->state_lock); return 0; From d3a80bb5a3eac311ddf28387402593977574460d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 25 Oct 2018 15:41:58 +0000 Subject: [PATCH 634/726] net/mlx5e: Don't match on vlan non-existence if ethertype is wildcarded For the "all" ethertype we should not care whether the packet has vlans. Besides being wrong, the way we did it caused FW error for rules such as: tc filter add dev eth0 protocol all parent ffff: \ prio 1 flower skip_sw action drop b/c the matching meta-data (outer headers bit in struct mlx5_flow_spec) wasn't set. Fix that by matching on vlan non-existence only if we were also told to match on the ethertype. Fixes: cee26487620b ('net/mlx5e: Set vlan masks for all offloaded TC rules') Signed-off-by: Or Gerlitz Reported-by: Slava Ovsiienko Reviewed-by: Jianbo Liu Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en_tc.c | 63 ++++++++++--------- 1 file changed, 32 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 608025ca5c04..84eb6939e69a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1447,31 +1447,21 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, inner_headers); } - if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { - struct flow_dissector_key_eth_addrs *key = + if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_BASIC)) { + struct flow_dissector_key_basic *key = skb_flow_dissector_target(f->dissector, - FLOW_DISSECTOR_KEY_ETH_ADDRS, + FLOW_DISSECTOR_KEY_BASIC, f->key); - struct flow_dissector_key_eth_addrs *mask = + struct flow_dissector_key_basic *mask = skb_flow_dissector_target(f->dissector, - FLOW_DISSECTOR_KEY_ETH_ADDRS, + FLOW_DISSECTOR_KEY_BASIC, f->mask); + MLX5_SET(fte_match_set_lyr_2_4, headers_c, ethertype, + ntohs(mask->n_proto)); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, + ntohs(key->n_proto)); - ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, - dmac_47_16), - mask->dst); - ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, - dmac_47_16), - key->dst); - - ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, - smac_47_16), - mask->src); - ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, - smac_47_16), - key->src); - - if (!is_zero_ether_addr(mask->src) || !is_zero_ether_addr(mask->dst)) + if (mask->n_proto) *match_level = MLX5_MATCH_L2; } @@ -1505,9 +1495,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, *match_level = MLX5_MATCH_L2; } - } else { + } else if (*match_level != MLX5_MATCH_NONE) { MLX5_SET(fte_match_set_lyr_2_4, headers_c, svlan_tag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_c, cvlan_tag, 1); + *match_level = MLX5_MATCH_L2; } if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_CVLAN)) { @@ -1545,21 +1536,31 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, } } - if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_BASIC)) { - struct flow_dissector_key_basic *key = + if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { + struct flow_dissector_key_eth_addrs *key = skb_flow_dissector_target(f->dissector, - FLOW_DISSECTOR_KEY_BASIC, + FLOW_DISSECTOR_KEY_ETH_ADDRS, f->key); - struct flow_dissector_key_basic *mask = + struct flow_dissector_key_eth_addrs *mask = skb_flow_dissector_target(f->dissector, - FLOW_DISSECTOR_KEY_BASIC, + FLOW_DISSECTOR_KEY_ETH_ADDRS, f->mask); - MLX5_SET(fte_match_set_lyr_2_4, headers_c, ethertype, - ntohs(mask->n_proto)); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, - ntohs(key->n_proto)); - if (mask->n_proto) + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, + dmac_47_16), + mask->dst); + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, + dmac_47_16), + key->dst); + + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, + smac_47_16), + mask->src); + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, + smac_47_16), + key->src); + + if (!is_zero_ether_addr(mask->src) || !is_zero_ether_addr(mask->dst)) *match_level = MLX5_MATCH_L2; } From 077ecd785d90c6cbba08d719faa4be8561aa0a1e Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 18 Oct 2018 12:31:27 +0200 Subject: [PATCH 635/726] net/mlx5e: Claim TC hw offloads support only under a proper build config Currently, we are only supporting tc hw offloads when the eswitch support is compiled in, but we are not gating the adevertizment of the NETIF_F_HW_TC feature on this config being set. Fix it, and while doing that, also avoid dealing with the feature on ethtool when the config is not set. Fixes: e8f887ac6a45 ('net/mlx5e: Introduce tc offload support') Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 1243edbedc9e..fb3b2d9c352b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3574,6 +3574,7 @@ static int set_feature_cvlan_filter(struct net_device *netdev, bool enable) return 0; } +#ifdef CONFIG_MLX5_ESWITCH static int set_feature_tc_num_filters(struct net_device *netdev, bool enable) { struct mlx5e_priv *priv = netdev_priv(netdev); @@ -3586,6 +3587,7 @@ static int set_feature_tc_num_filters(struct net_device *netdev, bool enable) return 0; } +#endif static int set_feature_rx_all(struct net_device *netdev, bool enable) { @@ -3684,7 +3686,9 @@ static int mlx5e_set_features(struct net_device *netdev, err |= MLX5E_HANDLE_FEATURE(NETIF_F_LRO, set_feature_lro); err |= MLX5E_HANDLE_FEATURE(NETIF_F_HW_VLAN_CTAG_FILTER, set_feature_cvlan_filter); +#ifdef CONFIG_MLX5_ESWITCH err |= MLX5E_HANDLE_FEATURE(NETIF_F_HW_TC, set_feature_tc_num_filters); +#endif err |= MLX5E_HANDLE_FEATURE(NETIF_F_RXALL, set_feature_rx_all); err |= MLX5E_HANDLE_FEATURE(NETIF_F_RXFCS, set_feature_rx_fcs); err |= MLX5E_HANDLE_FEATURE(NETIF_F_HW_VLAN_CTAG_RX, set_feature_rx_vlan); @@ -4678,7 +4682,9 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) FT_CAP(modify_root) && FT_CAP(identified_miss_table_mode) && FT_CAP(flow_table_modify)) { +#ifdef CONFIG_MLX5_ESWITCH netdev->hw_features |= NETIF_F_HW_TC; +#endif #ifdef CONFIG_MLX5_EN_ARFS netdev->hw_features |= NETIF_F_NTUPLE; #endif From 83621b7df6a646e550fd3d36db2e301cf9a5096b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 28 Oct 2018 12:27:29 +0200 Subject: [PATCH 636/726] net/mlx5e: Always use the match level enum when parsing TC rule match We get the match level (none, l2, l3, l4) while going over the match dissectors of an offloaded tc rule. When doing this, the match level enum and the not min inline enum values should be used, fix that. This worked accidentally b/c both enums have the same numerical values. Fixes: d708f902989b ('net/mlx5e: Get the required HW match level while parsing TC flow matches') Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 84eb6939e69a..0409767237a7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1587,10 +1587,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, /* the HW doesn't need L3 inline to match on frag=no */ if (!(key->flags & FLOW_DIS_IS_FRAGMENT)) - *match_level = MLX5_INLINE_MODE_L2; + *match_level = MLX5_MATCH_L2; /* *** L2 attributes parsing up to here *** */ else - *match_level = MLX5_INLINE_MODE_IP; + *match_level = MLX5_MATCH_L3; } } From a1f240f1801721f76bee734c50df2d9529da86e0 Mon Sep 17 00:00:00 2001 From: Yuval Avnery Date: Tue, 16 Oct 2018 15:20:20 -0500 Subject: [PATCH 637/726] net/mlx5e: Adjust to max number of channles when re-attaching When core driver enters deattach/attach flow after pci reset, Number of logical CPUs may have changed. As a result we need to update the cpu affiliated resource tables. 1. indirect rqt list 2. eq table Reproduction (PowerPC): echo 1000 > /sys/kernel/debug/powerpc/eeh_max_freezes ppc64_cpu --smt=on # Restart driver modprobe -r ... ; modprobe ... # Link up ifconfig ... # Only physical CPUs ppc64_cpu --smt=off # Inject PCI errors so PCI will reset - calling the pci error handler echo 0x8000000000000000 > /sys/kernel/debug/powerpc//err_injct_inboundA Call trace when trying to add non-existing rqs to an indirect rqt: mlx5e_redirect_rqt+0x84/0x260 [mlx5_core] (unreliable) mlx5e_redirect_rqts+0x188/0x190 [mlx5_core] mlx5e_activate_priv_channels+0x488/0x570 [mlx5_core] mlx5e_open_locked+0xbc/0x140 [mlx5_core] mlx5e_open+0x50/0x130 [mlx5_core] mlx5e_nic_enable+0x174/0x1b0 [mlx5_core] mlx5e_attach_netdev+0x154/0x290 [mlx5_core] mlx5e_attach+0x88/0xd0 [mlx5_core] mlx5_attach_device+0x168/0x1e0 [mlx5_core] mlx5_load_one+0x1140/0x1210 [mlx5_core] mlx5_pci_resume+0x6c/0xf0 [mlx5_core] Create cq will fail when trying to use non-existing EQ. Fixes: 89d44f0a6c73 ("net/mlx5_core: Add pci error handlers to mlx5_core driver") Signed-off-by: Yuval Avnery Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en_main.c | 27 +++++++++++++++---- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index fb3b2d9c352b..25b09bb68e8b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1623,13 +1623,15 @@ static int mlx5e_alloc_cq_common(struct mlx5_core_dev *mdev, int err; u32 i; + err = mlx5_vector2eqn(mdev, param->eq_ix, &eqn_not_used, &irqn); + if (err) + return err; + err = mlx5_cqwq_create(mdev, ¶m->wq, param->cqc, &cq->wq, &cq->wq_ctrl); if (err) return err; - mlx5_vector2eqn(mdev, param->eq_ix, &eqn_not_used, &irqn); - mcq->cqe_sz = 64; mcq->set_ci_db = cq->wq_ctrl.db.db; mcq->arm_db = cq->wq_ctrl.db.db + 1; @@ -1687,6 +1689,10 @@ static int mlx5e_create_cq(struct mlx5e_cq *cq, struct mlx5e_cq_param *param) int eqn; int err; + err = mlx5_vector2eqn(mdev, param->eq_ix, &eqn, &irqn_not_used); + if (err) + return err; + inlen = MLX5_ST_SZ_BYTES(create_cq_in) + sizeof(u64) * cq->wq_ctrl.buf.npages; in = kvzalloc(inlen, GFP_KERNEL); @@ -1700,8 +1706,6 @@ static int mlx5e_create_cq(struct mlx5e_cq *cq, struct mlx5e_cq_param *param) mlx5_fill_page_frag_array(&cq->wq_ctrl.buf, (__be64 *)MLX5_ADDR_OF(create_cq_in, in, pas)); - mlx5_vector2eqn(mdev, param->eq_ix, &eqn, &irqn_not_used); - MLX5_SET(cqc, cqc, cq_period_mode, param->cq_period_mode); MLX5_SET(cqc, cqc, c_eqn, eqn); MLX5_SET(cqc, cqc, uar_page, mdev->priv.uar->index); @@ -1921,6 +1925,10 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, int err; int eqn; + err = mlx5_vector2eqn(priv->mdev, ix, &eqn, &irq); + if (err) + return err; + c = kvzalloc_node(sizeof(*c), GFP_KERNEL, cpu_to_node(cpu)); if (!c) return -ENOMEM; @@ -1937,7 +1945,6 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->xdp = !!params->xdp_prog; c->stats = &priv->channel_stats[ix].ch; - mlx5_vector2eqn(priv->mdev, ix, &eqn, &irq); c->irq_desc = irq_to_desc(irq); netif_napi_add(netdev, &c->napi, mlx5e_napi_poll, 64); @@ -5010,11 +5017,21 @@ err_free_netdev: int mlx5e_attach_netdev(struct mlx5e_priv *priv) { const struct mlx5e_profile *profile; + int max_nch; int err; profile = priv->profile; clear_bit(MLX5E_STATE_DESTROYING, &priv->state); + /* max number of channels may have changed */ + max_nch = mlx5e_get_max_num_channels(priv->mdev); + if (priv->channels.params.num_channels > max_nch) { + mlx5_core_warn(priv->mdev, "MLX5E: Reducing number of channels to %d\n", max_nch); + priv->channels.params.num_channels = max_nch; + mlx5e_build_default_indir_rqt(priv->channels.params.indirection_rqt, + MLX5E_INDIR_RQT_SIZE, max_nch); + } + err = profile->init_tx(priv); if (err) goto out; From 1392f44bba22533b8dfdc6b0e73610b27c3f76cf Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Tue, 23 Oct 2018 17:30:04 +0300 Subject: [PATCH 638/726] net/mlx5e: Apply the correct check for supporting TC esw rules split The mirror and not the output count is the one denoting a split. Fix to condition the offload attempt on the mirror count being > 0 along the firmware to have the related capability. Fixes: 592d36515969 ("net/mlx5e: Parse mirroring action for offloaded TC eswitch flows") Signed-off-by: Roi Dayan Reviewed-by: Yossi Kuperman Reviewed-by: Chris Mi Acked-by: Or Gerlitz Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 0409767237a7..fca6f4132c91 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2980,7 +2980,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts, if (!actions_match_supported(priv, exts, parse_attr, flow, extack)) return -EOPNOTSUPP; - if (attr->out_count > 1 && !mlx5_esw_has_fwd_fdb(priv->mdev)) { + if (attr->mirror_count > 0 && !mlx5_esw_has_fwd_fdb(priv->mdev)) { NL_SET_ERR_MSG_MOD(extack, "current firmware doesn't support split rule for port mirroring"); netdev_warn_once(priv->netdev, "current firmware doesn't support split rule for port mirroring\n"); From 0073c8f72736b423aade8a817587a5f3e4df4ad8 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Thu, 11 Oct 2018 07:31:10 +0300 Subject: [PATCH 639/726] net/mlx5e: RX, verify received packet size in Linear Striding RQ In case of striding RQ, we use MPWRQ (Multi Packet WQE RQ), which means that WQE (RX descriptor) can be used for many packets and so the WQE is much bigger than MTU. In virtualization setups where the port mtu can be larger than the vf mtu, if received packet is bigger than MTU, it won't be dropped by HW on too small receive WQE. If we use linear SKB in striding RQ, since each stride has room for mtu size payload and skb info, an oversized packet can lead to crash for crossing allocated page boundary upon the call to build_skb. So driver needs to check packet size and drop it. Introduce new SW rx counter, rx_oversize_pkts_sw_drop, which counts the number of packets dropped by the driver for being too large. As a new field is added to the RQ struct, re-open the channels whenever this field is being used in datapath (i.e., in the case of linear Striding RQ). Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ") Signed-off-by: Moshe Shemesh Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 +++- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 ++++++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 3 +++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 2 ++ 5 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index d7fbd5b6ac95..118324802926 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -569,6 +569,7 @@ struct mlx5e_rq { unsigned long state; int ix; + unsigned int hw_mtu; struct net_dim dim; /* Dynamic Interrupt Moderation */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 25b09bb68e8b..871313d6b34d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -502,6 +502,7 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c, rq->channel = c; rq->ix = c->ix; rq->mdev = mdev; + rq->hw_mtu = MLX5E_SW2HW_MTU(params, params->sw_mtu); rq->stats = &c->priv->channel_stats[c->ix].rq; rq->xdp_prog = params->xdp_prog ? bpf_prog_inc(params->xdp_prog) : NULL; @@ -3766,10 +3767,11 @@ int mlx5e_change_mtu(struct net_device *netdev, int new_mtu, } if (params->rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ) { + bool is_linear = mlx5e_rx_mpwqe_is_linear_skb(priv->mdev, &new_channels.params); u8 ppw_old = mlx5e_mpwqe_log_pkts_per_wqe(params); u8 ppw_new = mlx5e_mpwqe_log_pkts_per_wqe(&new_channels.params); - reset = reset && (ppw_old != ppw_new); + reset = reset && (is_linear || (ppw_old != ppw_new)); } if (!reset) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 79638dcbae78..16985ca3248d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -1104,6 +1104,12 @@ mlx5e_skb_from_cqe_mpwrq_linear(struct mlx5e_rq *rq, struct mlx5e_mpw_info *wi, u32 frag_size; bool consumed; + /* Check packet size. Note LRO doesn't use linear SKB */ + if (unlikely(cqe_bcnt > rq->hw_mtu)) { + rq->stats->oversize_pkts_sw_drop++; + return NULL; + } + va = page_address(di->page) + head_offset; data = va + rx_headroom; frag_size = MLX5_SKB_FRAG_SZ(rx_headroom + cqe_bcnt32); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 1e55b9c27ffc..3e99d0728b2f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -83,6 +83,7 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_wqe_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_mpwqe_filler_cqes) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_mpwqe_filler_strides) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_oversize_pkts_sw_drop) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_buff_alloc_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_blks) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_cqe_compress_pkts) }, @@ -161,6 +162,7 @@ void mlx5e_grp_sw_update_stats(struct mlx5e_priv *priv) s->rx_wqe_err += rq_stats->wqe_err; s->rx_mpwqe_filler_cqes += rq_stats->mpwqe_filler_cqes; s->rx_mpwqe_filler_strides += rq_stats->mpwqe_filler_strides; + s->rx_oversize_pkts_sw_drop += rq_stats->oversize_pkts_sw_drop; s->rx_buff_alloc_err += rq_stats->buff_alloc_err; s->rx_cqe_compress_blks += rq_stats->cqe_compress_blks; s->rx_cqe_compress_pkts += rq_stats->cqe_compress_pkts; @@ -1189,6 +1191,7 @@ static const struct counter_desc rq_stats_desc[] = { { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, wqe_err) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler_cqes) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler_strides) }, + { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, oversize_pkts_sw_drop) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, buff_alloc_err) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_blks) }, { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, cqe_compress_pkts) }, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 77f74ce11280..3f8e870ef4c9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -96,6 +96,7 @@ struct mlx5e_sw_stats { u64 rx_wqe_err; u64 rx_mpwqe_filler_cqes; u64 rx_mpwqe_filler_strides; + u64 rx_oversize_pkts_sw_drop; u64 rx_buff_alloc_err; u64 rx_cqe_compress_blks; u64 rx_cqe_compress_pkts; @@ -193,6 +194,7 @@ struct mlx5e_rq_stats { u64 wqe_err; u64 mpwqe_filler_cqes; u64 mpwqe_filler_strides; + u64 oversize_pkts_sw_drop; u64 buff_alloc_err; u64 cqe_compress_blks; u64 cqe_compress_pkts; From 228c4cd04dfd0667eda182c91504b83c17d97584 Mon Sep 17 00:00:00 2001 From: Valentine Fatiev Date: Wed, 17 Oct 2018 11:45:07 +0300 Subject: [PATCH 640/726] net/mlx5e: Fix selftest for small MTUs Loopback test had fixed packet size, which can be bigger than configured MTU. Shorten the loopback packet size to be bigger than minimal MTU allowed by the device. Text field removed from struct 'mlx5ehdr' as redundant to allow send small packets as minimal allowed MTU. Fixes: d605d66 ("net/mlx5e: Add support for ethtool self diagnostics test") Signed-off-by: Valentine Fatiev Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- .../ethernet/mellanox/mlx5/core/en_selftest.c | 26 +++++++------------ 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c index 35ded91203f5..4382ef85488c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c @@ -98,18 +98,17 @@ static int mlx5e_test_link_speed(struct mlx5e_priv *priv) return 1; } -#ifdef CONFIG_INET -/* loopback test */ -#define MLX5E_TEST_PKT_SIZE (MLX5E_RX_MAX_HEAD - NET_IP_ALIGN) -static const char mlx5e_test_text[ETH_GSTRING_LEN] = "MLX5E SELF TEST"; -#define MLX5E_TEST_MAGIC 0x5AEED15C001ULL - struct mlx5ehdr { __be32 version; __be64 magic; - char text[ETH_GSTRING_LEN]; }; +#ifdef CONFIG_INET +/* loopback test */ +#define MLX5E_TEST_PKT_SIZE (sizeof(struct ethhdr) + sizeof(struct iphdr) +\ + sizeof(struct udphdr) + sizeof(struct mlx5ehdr)) +#define MLX5E_TEST_MAGIC 0x5AEED15C001ULL + static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv) { struct sk_buff *skb = NULL; @@ -117,10 +116,7 @@ static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv) struct ethhdr *ethh; struct udphdr *udph; struct iphdr *iph; - int datalen, iplen; - - datalen = MLX5E_TEST_PKT_SIZE - - (sizeof(*ethh) + sizeof(*iph) + sizeof(*udph)); + int iplen; skb = netdev_alloc_skb(priv->netdev, MLX5E_TEST_PKT_SIZE); if (!skb) { @@ -149,7 +145,7 @@ static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv) /* Fill UDP header */ udph->source = htons(9); udph->dest = htons(9); /* Discard Protocol */ - udph->len = htons(datalen + sizeof(struct udphdr)); + udph->len = htons(sizeof(struct mlx5ehdr) + sizeof(struct udphdr)); udph->check = 0; /* Fill IP header */ @@ -157,7 +153,8 @@ static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv) iph->ttl = 32; iph->version = 4; iph->protocol = IPPROTO_UDP; - iplen = sizeof(struct iphdr) + sizeof(struct udphdr) + datalen; + iplen = sizeof(struct iphdr) + sizeof(struct udphdr) + + sizeof(struct mlx5ehdr); iph->tot_len = htons(iplen); iph->frag_off = 0; iph->saddr = 0; @@ -170,9 +167,6 @@ static struct sk_buff *mlx5e_test_get_udp_skb(struct mlx5e_priv *priv) mlxh = skb_put(skb, sizeof(*mlxh)); mlxh->version = 0; mlxh->magic = cpu_to_be64(MLX5E_TEST_MAGIC); - strlcpy(mlxh->text, mlx5e_test_text, sizeof(mlxh->text)); - datalen -= sizeof(*mlxh); - skb_put_zero(skb, datalen); skb->csum = 0; skb->ip_summed = CHECKSUM_PARTIAL; From e1e46479847e66f78f79d8c24d5169a5954b3fc2 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 18 Nov 2018 21:59:49 +0800 Subject: [PATCH 641/726] sctp: not increase stream's incnt before sending addstrm_in request Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d519d7 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by: Jianwen Ji Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/stream.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/sctp/stream.c b/net/sctp/stream.c index ffb940d3b57c..3892e7630f3a 100644 --- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -535,7 +535,6 @@ int sctp_send_add_streams(struct sctp_association *asoc, goto out; } - stream->incnt = incnt; stream->outcnt = outcnt; asoc->strreset_outstanding = !!out + !!in; From e76ad21d070f79e566ac46ce0b0584c3c93e1b43 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Mon, 19 Nov 2018 12:05:20 +0200 Subject: [PATCH 642/726] net: ena: fix crash during failed resume from hibernation During resume from hibernation if ena_restore_device fails, ena_com_dev_reset() is called, and uses the readless read mechanism, which was already destroyed by the call to ena_com_mmio_reg_read_request_destroy(). This causes a NULL pointer reference. In this commit we switch the call order of the above two functions to avoid this crash. Fixes: d7703ddbd7c9 ("net: ena: fix rare bug when failed restart/resume is followed by driver removal") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 18956e7604a3..1d3cead0977e 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2694,8 +2694,8 @@ err_device_destroy: ena_com_abort_admin_commands(ena_dev); ena_com_wait_for_abort_completion(ena_dev); ena_com_admin_destroy(ena_dev); - ena_com_mmio_reg_read_request_destroy(ena_dev); ena_com_dev_reset(ena_dev, ENA_REGS_RESET_DRIVER_INVALID_STATE); + ena_com_mmio_reg_read_request_destroy(ena_dev); err: clear_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags); clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags); From 58a54b9c62e206b8d5f6e59020bcb178fc271d8e Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Mon, 19 Nov 2018 12:05:21 +0200 Subject: [PATCH 643/726] net: ena: fix crash during ena_remove() In ena_remove() we have the following stack call: ena_remove() unregister_netdev() ena_destroy_device() netif_carrier_off() Calling netif_carrier_off() causes linkwatch to try to handle the link change event on the already unregistered netdev, which leads to a read from an unreadable memory address. This patch switches the order of the two functions, so that netif_carrier_off() is called on a regiestered netdev. To accomplish this fix we also had to: 1. Remove the set bit ENA_FLAG_TRIGGER_RESET 2. Add a sanitiy check in ena_close() both to prevent double device reset (when calling unregister_netdev() ena_close is called, but the device was already deleted in ena_destroy_device()). 3. Set the admin_queue running state to false to avoid using it after device was reset (for example when calling ena_destroy_all_io_queues() right after ena_com_dev_reset() in ena_down) Fixes: 944b28aa2982 ("net: ena: fix missing lock during device destruction") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 21 ++++++++++---------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 1d3cead0977e..a70bb1bb90e7 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1848,6 +1848,8 @@ static void ena_down(struct ena_adapter *adapter) rc = ena_com_dev_reset(adapter->ena_dev, adapter->reset_reason); if (rc) dev_err(&adapter->pdev->dev, "Device reset failed\n"); + /* stop submitting admin commands on a device that was reset */ + ena_com_set_admin_running_state(adapter->ena_dev, false); } ena_destroy_all_io_queues(adapter); @@ -1914,6 +1916,9 @@ static int ena_close(struct net_device *netdev) netif_dbg(adapter, ifdown, netdev, "%s\n", __func__); + if (!test_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags)) + return 0; + if (test_bit(ENA_FLAG_DEV_UP, &adapter->flags)) ena_down(adapter); @@ -2613,9 +2618,7 @@ static void ena_destroy_device(struct ena_adapter *adapter, bool graceful) ena_down(adapter); /* Stop the device from sending AENQ events (in case reset flag is set - * and device is up, ena_close already reset the device - * In case the reset flag is set and the device is up, ena_down() - * already perform the reset, so it can be skipped. + * and device is up, ena_down() already reset the device. */ if (!(test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags) && dev_up)) ena_com_dev_reset(adapter->ena_dev, adapter->reset_reason); @@ -3452,6 +3455,8 @@ err_rss: ena_com_rss_destroy(ena_dev); err_free_msix: ena_com_dev_reset(ena_dev, ENA_REGS_RESET_INIT_ERR); + /* stop submitting admin commands on a device that was reset */ + ena_com_set_admin_running_state(ena_dev, false); ena_free_mgmnt_irq(adapter); ena_disable_msix(adapter); err_worker_destroy: @@ -3498,18 +3503,12 @@ static void ena_remove(struct pci_dev *pdev) cancel_work_sync(&adapter->reset_task); - unregister_netdev(netdev); - - /* If the device is running then we want to make sure the device will be - * reset to make sure no more events will be issued by the device. - */ - if (test_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags)) - set_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags); - rtnl_lock(); ena_destroy_device(adapter, true); rtnl_unlock(); + unregister_netdev(netdev); + free_netdev(netdev); ena_com_rss_destroy(ena_dev); From 4c23738a3f9f203a9b41c89e030eaa8ee241f90f Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Mon, 19 Nov 2018 12:05:22 +0200 Subject: [PATCH 644/726] net: ena: update driver version from 2.0.1 to 2.0.2 Update driver version due to critical bug fixes. Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h index 521873642339..dc8b6173d8d8 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.h +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h @@ -45,7 +45,7 @@ #define DRV_MODULE_VER_MAJOR 2 #define DRV_MODULE_VER_MINOR 0 -#define DRV_MODULE_VER_SUBMINOR 1 +#define DRV_MODULE_VER_SUBMINOR 2 #define DRV_MODULE_NAME "ena" #ifndef DRV_MODULE_VERSION From 9cdeaab3b7e72fe60f582e7658511f30c19f1e29 Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Sun, 28 Oct 2018 16:13:46 +0200 Subject: [PATCH 645/726] net/mlx5e: Fix a bug in turning off FEC policy in unsupported speeds Some speeds don't support turning FEC policy off. In case a requested FEC policy is not supported for a speed (including current speed), its new FEC policy would be: no FEC - if disabling FEC is supported for that speed unchanged - else Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/en/port.c | 28 ++++++++----------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index 023dc4bccd28..c16351eb9e54 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -394,12 +394,12 @@ int mlx5e_get_fec_mode(struct mlx5_core_dev *dev, u32 *fec_mode_active, int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy) { + u8 fec_policy_nofec = BIT(MLX5E_FEC_NOFEC); bool fec_mode_not_supp_in_speed = false; - u8 no_fec_policy = BIT(MLX5E_FEC_NOFEC); u32 out[MLX5_ST_SZ_DW(pplm_reg)] = {}; u32 in[MLX5_ST_SZ_DW(pplm_reg)] = {}; int sz = MLX5_ST_SZ_BYTES(pplm_reg); - u32 current_fec_speed; + u8 fec_policy_auto = 0; u8 fec_caps = 0; int err; int i; @@ -415,23 +415,19 @@ int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy) if (err) return err; - err = mlx5e_port_linkspeed(dev, ¤t_fec_speed); - if (err) - return err; + MLX5_SET(pplm_reg, out, local_port, 1); - memset(in, 0, sz); - MLX5_SET(pplm_reg, in, local_port, 1); - for (i = 0; i < MLX5E_FEC_SUPPORTED_SPEEDS && !!fec_policy; i++) { + for (i = 0; i < MLX5E_FEC_SUPPORTED_SPEEDS; i++) { mlx5e_get_fec_cap_field(out, &fec_caps, fec_supported_speeds[i]); - /* policy supported for link speed */ - if (!!(fec_caps & fec_policy)) { - mlx5e_fec_admin_field(in, &fec_policy, 1, + /* policy supported for link speed, or policy is auto */ + if (fec_caps & fec_policy || fec_policy == fec_policy_auto) { + mlx5e_fec_admin_field(out, &fec_policy, 1, fec_supported_speeds[i]); } else { - if (fec_supported_speeds[i] == current_fec_speed) - return -EOPNOTSUPP; - mlx5e_fec_admin_field(in, &no_fec_policy, 1, - fec_supported_speeds[i]); + /* turn off FEC if supported. Else, leave it the same */ + if (fec_caps & fec_policy_nofec) + mlx5e_fec_admin_field(out, &fec_policy_nofec, 1, + fec_supported_speeds[i]); fec_mode_not_supp_in_speed = true; } } @@ -441,5 +437,5 @@ int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy) "FEC policy 0x%x is not supported for some speeds", fec_policy); - return mlx5_core_access_reg(dev, in, sz, out, sz, MLX5_REG_PPLM, 0, 1); + return mlx5_core_access_reg(dev, out, sz, out, sz, MLX5_REG_PPLM, 0, 1); } From febd72f27c02713823cdd011e0087c0e80eb8f62 Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Sun, 28 Oct 2018 09:17:29 +0200 Subject: [PATCH 646/726] net/mlx5e: Fix wrong field name in FEC related functions This bug would result in reading wrong FEC capabilities for 10G/40G. Fixes: 2095b2641477 ("net/mlx5e: Add port FEC get/set functions") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index c16351eb9e54..83ba9ea201d8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -258,7 +258,7 @@ static int mlx5e_fec_admin_field(u32 *pplm, case 40000: if (!write) *fec_policy = MLX5_GET(pplm_reg, pplm, - fec_override_cap_10g_40g); + fec_override_admin_10g_40g); else MLX5_SET(pplm_reg, pplm, fec_override_admin_10g_40g, *fec_policy); @@ -310,7 +310,7 @@ static int mlx5e_get_fec_cap_field(u32 *pplm, case 10000: case 40000: *fec_cap = MLX5_GET(pplm_reg, pplm, - fec_override_admin_10g_40g); + fec_override_cap_10g_40g); break; case 25000: *fec_cap = MLX5_GET(pplm_reg, pplm, From 64e283348458e2fd2fe41b60dfb6c30e88ee695f Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Sun, 28 Oct 2018 09:06:11 +0200 Subject: [PATCH 647/726] net/mlx5e: Removed unnecessary warnings in FEC caps query Querying interface FEC caps with 'ethtool [int]' after link reset throws warning regading link speed. This warning is not needed as there is already an indication in user space that the link is not up. Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 4 +--- drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 4 +++- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index 83ba9ea201d8..4a37713023be 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -88,10 +88,8 @@ int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) eth_proto_oper = MLX5_GET(ptys_reg, out, eth_proto_oper); *speed = mlx5e_port_ptys2speed(eth_proto_oper); - if (!(*speed)) { - mlx5_core_warn(mdev, "cannot get port speed\n"); + if (!(*speed)) err = -EINVAL; - } return err; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c index c047da8752da..eac245a93f91 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c @@ -130,8 +130,10 @@ static u32 calculate_xoff(struct mlx5e_priv *priv, unsigned int mtu) int err; err = mlx5e_port_linkspeed(priv->mdev, &speed); - if (err) + if (err) { + mlx5_core_warn(priv->mdev, "cannot get port speed\n"); return 0; + } xoff = (301 + 216 * priv->dcbx.cable_len / 100) * speed / 1000 + 272 * mtu / 100; From 9184e51b5b3ef4509ea869f43e34a60f78f0d32a Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Thu, 8 Nov 2018 14:23:36 +0200 Subject: [PATCH 648/726] net/mlx5e: Fix failing ethtool query on FEC query error If FEC caps query fails when executing 'ethtool ' the whole callback fails unnecessarily, fixed that by replacing the error return code with debug logging only. Fixes: 6cfa94605091 ("net/mlx5e: Ethtool driver callback for query/set FEC policy") Signed-off-by: Shay Agroskin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 3e770abfd802..25c1c4f96841 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -843,8 +843,7 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev, ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Autoneg); - err = get_fec_supported_advertised(mdev, link_ksettings); - if (err) + if (get_fec_supported_advertised(mdev, link_ksettings)) netdev_dbg(netdev, "%s: FEC caps query failed: %d\n", __func__, err); From aeabb3c96186a0f944fc2b1f25c84d5eb3a93fa9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 19 Nov 2018 20:11:45 -0500 Subject: [PATCH 649/726] NFSv4: Fix a NFSv4 state manager deadlock Fix a deadlock whereby the NFSv4 state manager can get stuck in the delegation return code, waiting for a layout return to complete in another thread. If the server reboots before that other thread completes, then we need to be able to start a second state manager thread in order to perform recovery. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 2 ++ fs/nfs/nfs4state.c | 16 +++++++++++----- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 8d59c9655ec4..1b994b527518 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -41,6 +41,8 @@ enum nfs4_client_state { NFS4CLNT_MOVED, NFS4CLNT_LEASE_MOVED, NFS4CLNT_DELEGATION_EXPIRED, + NFS4CLNT_RUN_MANAGER, + NFS4CLNT_DELEGRETURN_RUNNING, }; #define NFS4_RENEW_TIMEOUT 0x01 diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index ffea57885394..d8decf2ec48f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1210,6 +1210,7 @@ void nfs4_schedule_state_manager(struct nfs_client *clp) struct task_struct *task; char buf[INET6_ADDRSTRLEN + sizeof("-manager") + 1]; + set_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state); if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0) return; __module_get(THIS_MODULE); @@ -2503,6 +2504,7 @@ static void nfs4_state_manager(struct nfs_client *clp) /* Ensure exclusive access to NFSv4 state */ do { + clear_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state); if (test_bit(NFS4CLNT_PURGE_STATE, &clp->cl_state)) { section = "purge state"; status = nfs4_purge_lease(clp); @@ -2593,14 +2595,18 @@ static void nfs4_state_manager(struct nfs_client *clp) } nfs4_end_drain_session(clp); - if (test_and_clear_bit(NFS4CLNT_DELEGRETURN, &clp->cl_state)) { - nfs_client_return_marked_delegations(clp); - continue; + nfs4_clear_state_manager_bit(clp); + + if (!test_and_set_bit(NFS4CLNT_DELEGRETURN_RUNNING, &clp->cl_state)) { + if (test_and_clear_bit(NFS4CLNT_DELEGRETURN, &clp->cl_state)) { + nfs_client_return_marked_delegations(clp); + set_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state); + } + clear_bit(NFS4CLNT_DELEGRETURN_RUNNING, &clp->cl_state); } - nfs4_clear_state_manager_bit(clp); /* Did we race with an attempt to give us more work? */ - if (clp->cl_state == 0) + if (!test_bit(NFS4CLNT_RUN_MANAGER, &clp->cl_state)) return; if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0) return; From 276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Mon, 19 Nov 2018 16:28:30 +0200 Subject: [PATCH 650/726] qed: Fix bitmap_weight() check Fix the condition which verifies that only one flag is set. The API bitmap_weight() should receive size in bits instead of bytes. Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration") Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index cff141077558..9b41e4ba53e5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -485,8 +485,11 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, struct qed_qm_info *qm_info = &p_hwfn->qm_info; /* Can't have multiple flags set here */ - if (bitmap_weight((unsigned long *)&pq_flags, sizeof(pq_flags)) > 1) + if (bitmap_weight((unsigned long *)&pq_flags, + sizeof(pq_flags) * BITS_PER_BYTE) > 1) { + DP_ERR(p_hwfn, "requested multiple pq flags 0x%x\n", pq_flags); goto err; + } switch (pq_flags) { case PQ_FLAGS_RLS: From eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Mon, 19 Nov 2018 16:28:31 +0200 Subject: [PATCH 651/726] qed: Fix QM getters to always return a valid pq The getter callers doesn't know the valid Physical Queues (PQ) values. This patch makes sure that a valid PQ will always be returned. The patch consists of 3 fixes: - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it returned PQ 0, which can potentially be another function's pq. Verify that flag is enabled, otherwise return default start_pq. - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it returned NULL and could lead to a segmentation fault. Return default start_pq instead. - A modulo operation was added to MCOS/VFS PQ getters to make sure the PQ returned is in range of the required flag. Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration") Signed-off-by: Denis Bolotin Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 24 +++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 9b41e4ba53e5..88a8576ca9ce 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -491,6 +491,11 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, goto err; } + if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) { + DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags); + goto err; + } + switch (pq_flags) { case PQ_FLAGS_RLS: return &qm_info->first_rl_pq; @@ -513,8 +518,7 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn, } err: - DP_ERR(p_hwfn, "BAD pq flags %d\n", pq_flags); - return NULL; + return &qm_info->start_pq; } /* save pq index in qm info */ @@ -538,20 +542,32 @@ u16 qed_get_cm_pq_idx_mcos(struct qed_hwfn *p_hwfn, u8 tc) { u8 max_tc = qed_init_qm_get_num_tcs(p_hwfn); + if (max_tc == 0) { + DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n", + PQ_FLAGS_MCOS); + return p_hwfn->qm_info.start_pq; + } + if (tc > max_tc) DP_ERR(p_hwfn, "tc %d must be smaller than %d\n", tc, max_tc); - return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + tc; + return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + (tc % max_tc); } u16 qed_get_cm_pq_idx_vf(struct qed_hwfn *p_hwfn, u16 vf) { u16 max_vf = qed_init_qm_get_num_vfs(p_hwfn); + if (max_vf == 0) { + DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n", + PQ_FLAGS_VFS); + return p_hwfn->qm_info.start_pq; + } + if (vf > max_vf) DP_ERR(p_hwfn, "vf %d must be smaller than %d\n", vf, max_vf); - return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + vf; + return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + (vf % max_vf); } u16 qed_get_cm_pq_idx_ofld_mtc(struct qed_hwfn *p_hwfn, u8 tc) From a5681e20b541a507c7d4fd48ae4a4040d32ee1ef Mon Sep 17 00:00:00 2001 From: Juliet Kim Date: Mon, 19 Nov 2018 15:59:22 -0600 Subject: [PATCH 652/726] net/ibmnvic: Fix deadlock problem in reset This patch changes to use rtnl_lock only during a reset to avoid deadlock that could occur when a thread operating close is holding rtnl_lock and waiting for reset_lock acquired by another thread, which is waiting for rtnl_lock in order to set the number of tx/rx queues during a reset. Also, we now setting the number of tx/rx queues during a soft reset for failover or LPM events. Signed-off-by: Juliet Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 59 +++++++++++------------------- drivers/net/ethernet/ibm/ibmvnic.h | 2 +- 2 files changed, 22 insertions(+), 39 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c9d5d0a7fbf1..27a6df30eafd 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1103,20 +1103,15 @@ static int ibmvnic_open(struct net_device *netdev) return 0; } - mutex_lock(&adapter->reset_lock); - if (adapter->state != VNIC_CLOSED) { rc = ibmvnic_login(netdev); - if (rc) { - mutex_unlock(&adapter->reset_lock); + if (rc) return rc; - } rc = init_resources(adapter); if (rc) { netdev_err(netdev, "failed to initialize resources\n"); release_resources(adapter); - mutex_unlock(&adapter->reset_lock); return rc; } } @@ -1124,8 +1119,6 @@ static int ibmvnic_open(struct net_device *netdev) rc = __ibmvnic_open(netdev); netif_carrier_on(netdev); - mutex_unlock(&adapter->reset_lock); - return rc; } @@ -1269,10 +1262,8 @@ static int ibmvnic_close(struct net_device *netdev) return 0; } - mutex_lock(&adapter->reset_lock); rc = __ibmvnic_close(netdev); ibmvnic_cleanup(netdev); - mutex_unlock(&adapter->reset_lock); return rc; } @@ -1820,20 +1811,15 @@ static int do_reset(struct ibmvnic_adapter *adapter, return rc; } else if (adapter->req_rx_queues != old_num_rx_queues || adapter->req_tx_queues != old_num_tx_queues) { - adapter->map_id = 1; release_rx_pools(adapter); release_tx_pools(adapter); - rc = init_rx_pools(netdev); - if (rc) - return rc; - rc = init_tx_pools(netdev); + release_napi(adapter); + release_vpd_data(adapter); + + rc = init_resources(adapter); if (rc) return rc; - release_napi(adapter); - rc = init_napi(adapter); - if (rc) - return rc; } else { rc = reset_tx_pools(adapter); if (rc) @@ -1917,17 +1903,8 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter, adapter->state = VNIC_PROBED; return 0; } - /* netif_set_real_num_xx_queues needs to take rtnl lock here - * unless wait_for_reset is set, in which case the rtnl lock - * has already been taken before initializing the reset - */ - if (!adapter->wait_for_reset) { - rtnl_lock(); - rc = init_resources(adapter); - rtnl_unlock(); - } else { - rc = init_resources(adapter); - } + + rc = init_resources(adapter); if (rc) return rc; @@ -1986,13 +1963,21 @@ static void __ibmvnic_reset(struct work_struct *work) struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; struct net_device *netdev; + bool we_lock_rtnl = false; u32 reset_state; int rc = 0; adapter = container_of(work, struct ibmvnic_adapter, ibmvnic_reset); netdev = adapter->netdev; - mutex_lock(&adapter->reset_lock); + /* netif_set_real_num_xx_queues needs to take rtnl lock here + * unless wait_for_reset is set, in which case the rtnl lock + * has already been taken before initializing the reset + */ + if (!adapter->wait_for_reset) { + rtnl_lock(); + we_lock_rtnl = true; + } reset_state = adapter->state; rwi = get_next_rwi(adapter); @@ -2020,12 +2005,11 @@ static void __ibmvnic_reset(struct work_struct *work) if (rc) { netdev_dbg(adapter->netdev, "Reset failed\n"); free_all_rwi(adapter); - mutex_unlock(&adapter->reset_lock); - return; } adapter->resetting = false; - mutex_unlock(&adapter->reset_lock); + if (we_lock_rtnl) + rtnl_unlock(); } static int ibmvnic_reset(struct ibmvnic_adapter *adapter, @@ -4768,7 +4752,6 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) INIT_WORK(&adapter->ibmvnic_reset, __ibmvnic_reset); INIT_LIST_HEAD(&adapter->rwi_list); - mutex_init(&adapter->reset_lock); mutex_init(&adapter->rwi_lock); adapter->resetting = false; @@ -4840,8 +4823,8 @@ static int ibmvnic_remove(struct vio_dev *dev) struct ibmvnic_adapter *adapter = netdev_priv(netdev); adapter->state = VNIC_REMOVING; - unregister_netdev(netdev); - mutex_lock(&adapter->reset_lock); + rtnl_lock(); + unregister_netdevice(netdev); release_resources(adapter); release_sub_crqs(adapter, 1); @@ -4852,7 +4835,7 @@ static int ibmvnic_remove(struct vio_dev *dev) adapter->state = VNIC_REMOVED; - mutex_unlock(&adapter->reset_lock); + rtnl_unlock(); device_remove_file(&dev->dev, &dev_attr_failover); free_netdev(netdev); dev_set_drvdata(&dev->dev, NULL); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 18103b811d4d..99c4f8d331ce 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -1075,7 +1075,7 @@ struct ibmvnic_adapter { struct tasklet_struct tasklet; enum vnic_state state; enum ibmvnic_reset_reason reset_reason; - struct mutex reset_lock, rwi_lock; + struct mutex rwi_lock; struct list_head rwi_list; struct work_struct ibmvnic_reset; bool resetting; From 8830f26bcd3cf1ff07d9078cd310a534c03b6a10 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 2 Nov 2018 16:12:12 +0000 Subject: [PATCH 653/726] drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture Since capturing the error state requires fiddling around with the GGTT to read arbitrary buffers and is itself run under stop_machine(), it deadlocks the machine (effectively a hard hang) when run in conjunction with Broxton's VTd workaround to serialize GGTT access. v2: Store the ERR_PTR in first_error so that the error can be reported to the user via sysfs. v3: Mention the quirk in dmesg (using info as per usual) Fixes: 0ef34ad6222a ("drm/i915: Serialize GTT/Aperture accesses on BXT") Signed-off-by: Chris Wilson Cc: Jon Bloomfield Cc: John Harrison Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: Daniel Vetter Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-5-chris@chris-wilson.co.uk (cherry picked from commit fb6f0b64e455b207a636346588e65bf9598d30eb) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_gtt.c | 5 +++++ drivers/gpu/drm/i915/i915_gpu_error.c | 15 ++++++++++++++- drivers/gpu/drm/i915/i915_gpu_error.h | 8 +++++++- 3 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 47c302543799..07999fe09ad2 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -3413,6 +3413,11 @@ static int gen8_gmch_probe(struct i915_ggtt *ggtt) ggtt->vm.insert_page = bxt_vtd_ggtt_insert_page__BKL; if (ggtt->vm.clear_range != nop_clear_range) ggtt->vm.clear_range = bxt_vtd_ggtt_clear_range__BKL; + + /* Prevent recursively calling stop_machine() and deadlocks. */ + dev_info(dev_priv->drm.dev, + "Disabling error capture for VT-d workaround\n"); + i915_disable_error_state(dev_priv, -ENODEV); } ggtt->invalidate = gen6_ggtt_invalidate; diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index 8762d17b6659..3eb33e000d6f 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -648,6 +648,9 @@ int i915_error_state_to_str(struct drm_i915_error_state_buf *m, return 0; } + if (IS_ERR(error)) + return PTR_ERR(error); + if (*error->error_msg) err_printf(m, "%s\n", error->error_msg); err_printf(m, "Kernel: " UTS_RELEASE "\n"); @@ -1859,6 +1862,7 @@ void i915_capture_error_state(struct drm_i915_private *i915, error = i915_capture_gpu_state(i915); if (!error) { DRM_DEBUG_DRIVER("out of memory, not capturing error state\n"); + i915_disable_error_state(i915, -ENOMEM); return; } @@ -1914,5 +1918,14 @@ void i915_reset_error_state(struct drm_i915_private *i915) i915->gpu_error.first_error = NULL; spin_unlock_irq(&i915->gpu_error.lock); - i915_gpu_state_put(error); + if (!IS_ERR(error)) + i915_gpu_state_put(error); +} + +void i915_disable_error_state(struct drm_i915_private *i915, int err) +{ + spin_lock_irq(&i915->gpu_error.lock); + if (!i915->gpu_error.first_error) + i915->gpu_error.first_error = ERR_PTR(err); + spin_unlock_irq(&i915->gpu_error.lock); } diff --git a/drivers/gpu/drm/i915/i915_gpu_error.h b/drivers/gpu/drm/i915/i915_gpu_error.h index 8710fb18ed74..3ec89a504de5 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.h +++ b/drivers/gpu/drm/i915/i915_gpu_error.h @@ -343,6 +343,7 @@ static inline void i915_gpu_state_put(struct i915_gpu_state *gpu) struct i915_gpu_state *i915_first_error_state(struct drm_i915_private *i915); void i915_reset_error_state(struct drm_i915_private *i915); +void i915_disable_error_state(struct drm_i915_private *i915, int err); #else @@ -355,13 +356,18 @@ static inline void i915_capture_error_state(struct drm_i915_private *dev_priv, static inline struct i915_gpu_state * i915_first_error_state(struct drm_i915_private *i915) { - return NULL; + return ERR_PTR(-ENODEV); } static inline void i915_reset_error_state(struct drm_i915_private *i915) { } +static inline void i915_disable_error_state(struct drm_i915_private *i915, + int err) +{ +} + #endif /* IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR) */ #endif /* _I915_GPU_ERROR_H_ */ From 63529eaa6164ef7ab4b907b25ac3648177e5e78f Mon Sep 17 00:00:00 2001 From: Maarten Jacobs Date: Mon, 19 Nov 2018 23:18:49 +0000 Subject: [PATCH 654/726] usb: cdc-acm: add entry for Hiro (Conexant) modem The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 47d75c20c211..1b68fed464cb 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1696,6 +1696,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1349), /* Hiro (Conexant) USB MODEM H50228 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ From fb862c3b199d28bee238d52e8270eae8650d6cb0 Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Tue, 20 Nov 2018 07:25:08 +0100 Subject: [PATCH 655/726] HID: Add quirk for Primax PIXART OEM mice The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for two Primax mice as well. 0x4e22 is the Dell MS111-P and 0x4d0f is the unbranded HP Portia mouse HP 697738-001. Both were built until approx. 2014. Those were the standard mice from those vendors and are still around - even as new old stock. Reference: https://github.com/sriemer/fix-linux-mouse/issues/11 Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-quirks.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 2114ac647bef..ed35c9a9a110 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1210,6 +1210,8 @@ #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22 0x4d22 #define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05 #define USB_DEVICE_ID_PRIMAX_REZEL 0x4e72 +#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F 0x4d0f +#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22 0x4e22 #define USB_VENDOR_ID_RISO_KAGAKU 0x1294 /* Riso Kagaku Corp. */ diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index d82e5ab48837..c85a79986b6a 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -130,6 +130,8 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003), HID_QUIRK_NOGET }, From 21f70d4abf9e17c2e3d7e64b7bfa3424e017f176 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 14 Nov 2018 16:27:55 -0800 Subject: [PATCH 656/726] RISC-V: Fix raw_copy_{to,from}_user() Sparse highlighted it, and appears to be a pure bug (from vs to). ./arch/riscv/include/asm/uaccess.h:403:35: warning: incorrect type in argument 1 (different address spaces) ./arch/riscv/include/asm/uaccess.h:403:39: warning: incorrect type in argument 2 (different address spaces) ./arch/riscv/include/asm/uaccess.h:409:37: warning: incorrect type in argument 1 (different address spaces) ./arch/riscv/include/asm/uaccess.h:409:41: warning: incorrect type in argument 2 (different address spaces) Signed-off-by: Olof Johansson Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h index 473cfc84e412..8c3e3e3c8be1 100644 --- a/arch/riscv/include/asm/uaccess.h +++ b/arch/riscv/include/asm/uaccess.h @@ -400,13 +400,13 @@ extern unsigned long __must_check __asm_copy_from_user(void *to, static inline unsigned long raw_copy_from_user(void *to, const void __user *from, unsigned long n) { - return __asm_copy_to_user(to, from, n); + return __asm_copy_from_user(to, from, n); } static inline unsigned long raw_copy_to_user(void __user *to, const void *from, unsigned long n) { - return __asm_copy_from_user(to, from, n); + return __asm_copy_to_user(to, from, n); } extern long strncpy_from_user(char *dest, const char __user *src, long count); From c0fbcd9918607e85c9598bfa3dd0a84ed77ea210 Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Mon, 12 Nov 2018 11:25:15 +0530 Subject: [PATCH 657/726] RISC-V: Build flat and compressed kernel images This patch extends Linux RISC-V build system to build and install: Image - Flat uncompressed kernel image Image.gz - Flat and GZip compressed kernel image Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of booting flat and compressed kernel images. In case of Uboot, booting Image or Image.gz is achieved using bootm command. The flat and uncompressed kernel image (i.e. Image) is very useful in pre-silicon developent and testing because we can create back-door HEX files for RAM on FPGAs from Image. Signed-off-by: Anup Patel Signed-off-by: Palmer Dabbelt --- arch/riscv/Makefile | 15 ++++++++- arch/riscv/boot/.gitignore | 2 ++ arch/riscv/boot/Makefile | 33 ++++++++++++++++++ arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++ arch/riscv/kernel/head.S | 10 ++++++ arch/riscv/kernel/vmlinux.lds.S | 2 +- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/.gitignore create mode 100644 arch/riscv/boot/Makefile create mode 100644 arch/riscv/boot/install.sh diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 4af153a182b0..4b594f2e4f7e 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -71,6 +71,10 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align) # arch specific predefines for sparse CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) +# Default target when executing plain make +boot := arch/riscv/boot +KBUILD_IMAGE := $(boot)/Image.gz + head-y := arch/riscv/kernel/head.o core-y += arch/riscv/kernel/ arch/riscv/mm/ @@ -81,4 +85,13 @@ PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ -all: vmlinux +all: Image.gz + +Image: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +Image.%: Image + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +zinstall install: + $(Q)$(MAKE) $(build)=$(boot) $@ diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore new file mode 100644 index 000000000000..8dab0bb6ae66 --- /dev/null +++ b/arch/riscv/boot/.gitignore @@ -0,0 +1,2 @@ +Image +Image.gz diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile new file mode 100644 index 000000000000..0990a9fdbe5d --- /dev/null +++ b/arch/riscv/boot/Makefile @@ -0,0 +1,33 @@ +# +# arch/riscv/boot/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2018, Anup Patel. +# Author: Anup Patel +# +# Based on the ia64 and arm64 boot/Makefile. +# + +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S + +targets := Image + +$(obj)/Image: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/Image.gz: $(obj)/Image FORCE + $(call if_changed,gzip) + +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image System.map "$(INSTALL_PATH)" + +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(obj)/Image.gz System.map "$(INSTALL_PATH)" diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh new file mode 100644 index 000000000000..18c39159c0ff --- /dev/null +++ b/arch/riscv/boot/install.sh @@ -0,0 +1,60 @@ +#!/bin/sh +# +# arch/riscv/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# Adapted from code in arch/i386/boot/install.sh by Russell King +# +# "make install" script for the RISC-V Linux port +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + +# User may have a custom install script +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi + +if [ "$(basename $2)" = "Image.gz" ]; then +# Compressed install + echo "Installing compressed kernel" + base=vmlinuz +else +# Normal install + echo "Installing normal kernel" + base=vmlinux +fi + +if [ -f $4/$base-$1 ]; then + mv $4/$base-$1 $4/$base-$1.old +fi +cat $2 > $4/$base-$1 + +# Install system map file +if [ -f $4/System.map-$1 ]; then + mv $4/System.map-$1 $4/System.map-$1.old +fi +cp $3 $4/System.map-$1 diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S index 711190d473d4..fe884cd69abd 100644 --- a/arch/riscv/kernel/head.S +++ b/arch/riscv/kernel/head.S @@ -44,6 +44,16 @@ ENTRY(_start) amoadd.w a3, a2, (a3) bnez a3, .Lsecondary_start + /* Clear BSS for flat non-ELF images */ + la a3, __bss_start + la a4, __bss_stop + ble a4, a3, clear_bss_done +clear_bss: + REG_S zero, (a3) + add a3, a3, RISCV_SZPTR + blt a3, a4, clear_bss +clear_bss_done: + /* Save hart ID and DTB physical address */ mv s0, a0 mv s1, a1 diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S index ece84991609c..65df1dfdc303 100644 --- a/arch/riscv/kernel/vmlinux.lds.S +++ b/arch/riscv/kernel/vmlinux.lds.S @@ -74,7 +74,7 @@ SECTIONS *(.sbss*) } - BSS_SECTION(0, 0, 0) + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0) EXCEPTION_TABLE(0x10) NOTES From 0138ebb90c633f76bc71617f8f23635ce41c84fd Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Thu, 8 Nov 2018 20:07:00 +0100 Subject: [PATCH 658/726] riscv: fix warning in arch/riscv/include/asm/module.h Fixes warning: 'struct module' declared inside parameter list will not be visible outside of this definition or declaration Signed-off-by: David Abdurachmanov Acked-by: Olof Johansson Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/module.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/include/asm/module.h b/arch/riscv/include/asm/module.h index 349df33808c4..cd2af4b013e3 100644 --- a/arch/riscv/include/asm/module.h +++ b/arch/riscv/include/asm/module.h @@ -8,6 +8,7 @@ #define MODULE_ARCH_VERMAGIC "riscv" +struct module; u64 module_emit_got_entry(struct module *mod, u64 val); u64 module_emit_plt_entry(struct module *mod, u64 val); From 27f8899d6002e11a6e2d995e29b8deab5aa9cc25 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Thu, 8 Nov 2018 20:02:39 +0100 Subject: [PATCH 659/726] riscv: add asm/unistd.h UAPI header Marcin Juszkiewicz reported issues while generating syscall table for riscv using 4.20-rc1. The patch refactors our unistd.h files to match some other architectures. - Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit - Remove asm/syscalls.h UAPI header and merge to asm/unistd.h - Adjust kernel asm/unistd.h So now asm/unistd.h UAPI header should show all syscalls for riscv. Before this, Makefile simply put `#include ` into generated asm/unistd.h UAPI header thus user didn't see: - __NR_riscv_flush_icache - __NR_newfstatat - __NR_fstat which are supported by riscv kernel. Signed-off-by: David Abdurachmanov Cc: Arnd Bergmann Cc: Marcin Juszkiewicz Cc: Guenter Roeck Fixes: 67314ec7b025 ("RISC-V: Request newstat syscalls") Signed-off-by: David Abdurachmanov Acked-by: Olof Johansson Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/unistd.h | 5 ++-- .../include/uapi/asm/{syscalls.h => unistd.h} | 26 ++++++++++++++----- 2 files changed, 21 insertions(+), 10 deletions(-) rename arch/riscv/include/uapi/asm/{syscalls.h => unistd.h} (53%) diff --git a/arch/riscv/include/asm/unistd.h b/arch/riscv/include/asm/unistd.h index eff7aa9aa163..fef96f117b4d 100644 --- a/arch/riscv/include/asm/unistd.h +++ b/arch/riscv/include/asm/unistd.h @@ -13,10 +13,9 @@ /* * There is explicitly no include guard here because this file is expected to - * be included multiple times. See uapi/asm/syscalls.h for more info. + * be included multiple times. */ -#define __ARCH_WANT_NEW_STAT #define __ARCH_WANT_SYS_CLONE + #include -#include diff --git a/arch/riscv/include/uapi/asm/syscalls.h b/arch/riscv/include/uapi/asm/unistd.h similarity index 53% rename from arch/riscv/include/uapi/asm/syscalls.h rename to arch/riscv/include/uapi/asm/unistd.h index 206dc4b0f6ea..1f3bd3ebbb0d 100644 --- a/arch/riscv/include/uapi/asm/syscalls.h +++ b/arch/riscv/include/uapi/asm/unistd.h @@ -1,13 +1,25 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* - * Copyright (C) 2017-2018 SiFive + * Copyright (C) 2018 David Abdurachmanov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -/* - * There is explicitly no include guard here because this file is expected to - * be included multiple times in order to define the syscall macros via - * __SYSCALL. - */ +#ifdef __LP64__ +#define __ARCH_WANT_NEW_STAT +#endif /* __LP64__ */ + +#include /* * Allows the instruction cache to be flushed from userspace. Despite RISC-V From 5d8f81ba1da55210123b9595e87b913c79579d02 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Patrick=20St=C3=A4hlin?= Date: Fri, 9 Nov 2018 22:42:16 +0100 Subject: [PATCH 660/726] RISC-V: recognize S/U mode bits in print_isa MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Removes the warning about an unsupported ISA when reading /proc/cpuinfo on QEMU. The "S" extension is not being returned as it is not accessible from userspace. Signed-off-by: Patrick Stählin Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/cpu.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c index 3a5a2ee31547..b4a7d4427fbb 100644 --- a/arch/riscv/kernel/cpu.c +++ b/arch/riscv/kernel/cpu.c @@ -64,7 +64,7 @@ int riscv_of_processor_hartid(struct device_node *node) static void print_isa(struct seq_file *f, const char *orig_isa) { - static const char *ext = "mafdc"; + static const char *ext = "mafdcsu"; const char *isa = orig_isa; const char *e; @@ -88,11 +88,14 @@ static void print_isa(struct seq_file *f, const char *orig_isa) /* * Check the rest of the ISA string for valid extensions, printing those * we find. RISC-V ISA strings define an order, so we only print the - * extension bits when they're in order. + * extension bits when they're in order. Hide the supervisor (S) + * extension from userspace as it's not accessible from there. */ for (e = ext; *e != '\0'; ++e) { if (isa[0] == e[0]) { - seq_write(f, isa, 1); + if (isa[0] != 's') + seq_write(f, isa, 1); + isa++; } } From e8828ec1c003727fc001eab06aa19bd2ca9b677e Mon Sep 17 00:00:00 2001 From: "Tudor.Ambarus@microchip.com" Date: Fri, 16 Nov 2018 17:46:37 +0000 Subject: [PATCH 661/726] mtd: spi-nor: fix selection of uniform erase type in flexible conf There are uniform, non-uniform and flexible erase flash configurations. The non-uniform erase types, are the erase types that can _not_ erase the entire flash by their own. As the code was, in case flashes had flexible erase capabilities (support both uniform and non-uniform erase types in the same flash configuration) and supported multiple uniform erase type sizes, the code did not sort the uniform erase types, and could select a wrong erase type size. Sort the uniform erase mask in case of flexible erase flash configurations, in order to select the best uniform erase type size. Uniform, non-uniform, and flexible configurations with just a valid uniform erase type, are not affected by this change. Uniform erase tested on mx25l3273fm2i-08g and sst26vf064B-104i/sn. Non uniform erase tested on sst26vf064B-104i/sn. Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories") Signed-off-by: Tudor Ambarus Signed-off-by: Boris Brezillon --- drivers/mtd/spi-nor/spi-nor.c | 47 +++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index eb7bb596416b..93c9bc8931fc 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2521,6 +2521,34 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r) return left->size - right->size; } +/** + * spi_nor_sort_erase_mask() - sort erase mask + * @map: the erase map of the SPI NOR + * @erase_mask: the erase type mask to be sorted + * + * Replicate the sort done for the map's erase types in BFPT: sort the erase + * mask in ascending order with the smallest erase type size starting from + * BIT(0) in the sorted erase mask. + * + * Return: sorted erase mask. + */ +static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask) +{ + struct spi_nor_erase_type *erase_type = map->erase_type; + int i; + u8 sorted_erase_mask = 0; + + if (!erase_mask) + return 0; + + /* Replicate the sort done for the map's erase types. */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx)) + sorted_erase_mask |= BIT(i); + + return sorted_erase_mask; +} + /** * spi_nor_regions_sort_erase_types() - sort erase types in each region * @map: the erase map of the SPI NOR @@ -2536,19 +2564,13 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r) static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map) { struct spi_nor_erase_region *region = map->regions; - struct spi_nor_erase_type *erase_type = map->erase_type; - int i; u8 region_erase_mask, sorted_erase_mask; while (region) { region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK; - /* Replicate the sort done for the map's erase types. */ - sorted_erase_mask = 0; - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) - if (erase_type[i].size && - region_erase_mask & BIT(erase_type[i].idx)) - sorted_erase_mask |= BIT(i); + sorted_erase_mask = spi_nor_sort_erase_mask(map, + region_erase_mask); /* Overwrite erase mask. */ region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) | @@ -2978,7 +3000,7 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, u64 offset; u32 region_count; int i, j; - u8 erase_type; + u8 erase_type, uniform_erase_type; region_count = SMPT_MAP_REGION_COUNT(*smpt); /* @@ -2991,7 +3013,7 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, return -ENOMEM; map->regions = region; - map->uniform_erase_type = 0xff; + uniform_erase_type = 0xff; offset = 0; /* Populate regions. */ for (i = 0; i < region_count; i++) { @@ -3006,12 +3028,15 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * Save the erase types that are supported in all regions and * can erase the entire flash memory. */ - map->uniform_erase_type &= erase_type; + uniform_erase_type &= erase_type; offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) + region[i].size; } + map->uniform_erase_type = spi_nor_sort_erase_mask(map, + uniform_erase_type); + spi_nor_region_mark_end(®ion[i - 1]); return 0; From cb5d21946d2a2f4687c482ab4604af1d29dac35a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 15 Nov 2018 15:03:24 -0800 Subject: [PATCH 662/726] MAINTAINERS: Add Sasha as a stable branch maintainer Sasha has somehow been convinced into helping me with the stable kernel maintenance. Codify this slip in good judgement before he realizes what he really signed up for :) Signed-off-by: Greg Kroah-Hartman Acked-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 0abecc528dac..a46c1aa82398 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14078,6 +14078,7 @@ F: Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt STABLE BRANCH M: Greg Kroah-Hartman +M: Sasha Levin L: stable@vger.kernel.org S: Supported F: Documentation/process/stable-kernel-rules.rst From 544b03da39e2d7b4961d3163976ed4bfb1fac509 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 19 Nov 2018 11:07:18 +0000 Subject: [PATCH 663/726] Documentation/security-bugs: Postpone fix publication in exceptional cases At the request of the reporter, the Linux kernel security team offers to postpone the publishing of a fix for up to 5 business days from the date of a report. While it is generally undesirable to keep a fix private after it has been developed, this short window is intended to allow distributions to package the fix into their kernel builds and permits early inclusion of the security team in the case of a co-ordinated disclosure with other parties. Unfortunately, discussions with major Linux distributions and cloud providers has revealed that 5 business days is not sufficient to achieve either of these two goals. As an example, cloud providers need to roll out KVM security fixes to a global fleet of hosts with sufficient early ramp-up and monitoring. An end-to-end timeline of less than two weeks dramatically cuts into the amount of early validation and increases the chance of guest-visible regressions. The consequence of this timeline mismatch is that security issues are commonly fixed without the involvement of the Linux kernel security team and are instead analysed and addressed by an ad-hoc group of developers across companies contributing to Linux. In some cases, mainline (and therefore the official stable kernels) can be left to languish for extended periods of time. This undermines the Linux kernel security process and puts upstream developers in a difficult position should they find themselves involved with an undisclosed security problem that they are unable to report due to restrictions from their employer. To accommodate the needs of these users of the Linux kernel and encourage them to engage with the Linux security team when security issues are first uncovered, extend the maximum period for which fixes may be delayed to 7 calendar days, or 14 calendar days in exceptional cases, where the logistics of QA and large scale rollouts specifically need to be accommodated. This brings parity with the linux-distros@ maximum embargo period of 14 calendar days. Cc: Paolo Bonzini Cc: David Woodhouse Cc: Amit Shah Cc: Laura Abbott Acked-by: Kees Cook Co-developed-by: Thomas Gleixner Co-developed-by: David Woodhouse Signed-off-by: Thomas Gleixner Signed-off-by: David Woodhouse Signed-off-by: Will Deacon Reviewed-by: Tyler Hicks Acked-by: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman --- Documentation/admin-guide/security-bugs.rst | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/Documentation/admin-guide/security-bugs.rst b/Documentation/admin-guide/security-bugs.rst index 164bf71149fd..30187d49dc2c 100644 --- a/Documentation/admin-guide/security-bugs.rst +++ b/Documentation/admin-guide/security-bugs.rst @@ -32,16 +32,17 @@ Disclosure and embargoed information The security list is not a disclosure channel. For that, see Coordination below. -Once a robust fix has been developed, our preference is to release the -fix in a timely fashion, treating it no differently than any of the other -thousands of changes and fixes the Linux kernel project releases every -month. +Once a robust fix has been developed, the release process starts. Fixes +for publicly known bugs are released immediately. -However, at the request of the reporter, we will postpone releasing the -fix for up to 5 business days after the date of the report or after the -embargo has lifted; whichever comes first. The only exception to that -rule is if the bug is publicly known, in which case the preference is to -release the fix as soon as it's available. +Although our preference is to release fixes for publicly undisclosed bugs +as soon as they become available, this may be postponed at the request of +the reporter or an affected party for up to 7 calendar days from the start +of the release process, with an exceptional extension to 14 calendar days +if it is agreed that the criticality of the bug requires more time. The +only valid reason for deferring the publication of a fix is to accommodate +the logistics of QA and large scale rollouts which require release +coordination. Whilst embargoed information may be shared with trusted individuals in order to develop a fix, such information will not be published alongside From 59663e42199c93d1d7314d1446f6782fc4b1eb81 Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Tue, 20 Nov 2018 10:04:04 +0530 Subject: [PATCH 664/726] tg3: Add PHY reset for 5717/5719/5720 in change ring and flow control paths This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by: Siva Reddy Kallam Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 89295306f161..432c3b867084 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -12422,6 +12422,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e { struct tg3 *tp = netdev_priv(dev); int i, irq_sync = 0, err = 0; + bool reset_phy = false; if ((ering->rx_pending > tp->rx_std_ring_mask) || (ering->rx_jumbo_pending > tp->rx_jmb_ring_mask) || @@ -12453,7 +12454,13 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e if (netif_running(dev)) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - err = tg3_restart_hw(tp, false); + /* Reset PHY to avoid PHY lock up */ + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) + reset_phy = true; + + err = tg3_restart_hw(tp, reset_phy); if (!err) tg3_netif_start(tp); } @@ -12487,6 +12494,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam { struct tg3 *tp = netdev_priv(dev); int err = 0; + bool reset_phy = false; if (tp->link_config.autoneg == AUTONEG_ENABLE) tg3_warn_mgmt_link_flap(tp); @@ -12556,7 +12564,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam if (netif_running(dev)) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - err = tg3_restart_hw(tp, false); + /* Reset PHY to avoid PHY lock up */ + if (tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) + reset_phy = true; + + err = tg3_restart_hw(tp, reset_phy); if (!err) tg3_netif_start(tp); } From cadf9df27e7cf40e390e060a1c71bb86ecde798b Mon Sep 17 00:00:00 2001 From: Stephen Mallon Date: Tue, 20 Nov 2018 19:15:02 +1100 Subject: [PATCH 665/726] tcp: Fix SOF_TIMESTAMPING_RX_HARDWARE to use the latest timestamp during TCP coalescing During tcp coalescing ensure that the skb hardware timestamp refers to the highest sequence number data. Previously only the software timestamp was updated during coalescing. Signed-off-by: Stephen Mallon Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2868ef28ce52..e695584bb33f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4363,6 +4363,7 @@ static bool tcp_try_coalesce(struct sock *sk, if (TCP_SKB_CB(from)->has_rxtstamp) { TCP_SKB_CB(to)->has_rxtstamp = true; to->tstamp = from->tstamp; + skb_hwtstamps(to)->hwtstamp = skb_hwtstamps(from)->hwtstamp; } return true; From d61fa8cbf3da85ffca6620f261354941c126ee23 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:07 -0800 Subject: [PATCH 666/726] xfs: uncached buffer tracing needs to print bno Useless: xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_submit: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_hold: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_iowait: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_iodone: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_iowait_done: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_rele: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... Useful: xfs_buf_get_uncached: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_unlock: dev 253:32 bno 0xffffffffffffffff nblks 0x1 ... xfs_buf_submit: dev 253:32 bno 0x200b5 nblks 0x1 ... xfs_buf_hold: dev 253:32 bno 0x200b5 nblks 0x1 ... xfs_buf_iowait: dev 253:32 bno 0x200b5 nblks 0x1 ... xfs_buf_iodone: dev 253:32 bno 0x200b5 nblks 0x1 ... xfs_buf_iowait_done: dev 253:32 bno 0x200b5 nblks 0x1 ... xfs_buf_rele: dev 253:32 bno 0x200b5 nblks 0x1 ... Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_trace.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index 3043e5ed6495..8a6532aae779 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -280,7 +280,10 @@ DECLARE_EVENT_CLASS(xfs_buf_class, ), TP_fast_assign( __entry->dev = bp->b_target->bt_dev; - __entry->bno = bp->b_bn; + if (bp->b_bn == XFS_BUF_DADDR_NULL) + __entry->bno = bp->b_maps[0].bm_bn; + else + __entry->bno = bp->b_bn; __entry->nblks = bp->b_length; __entry->hold = atomic_read(&bp->b_hold); __entry->pincount = atomic_read(&bp->b_pin_count); From d43aaf1685aa471f0593685c9f54d53e3af3cf3f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:08 -0800 Subject: [PATCH 667/726] xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers When retrying a failed inode or dquot buffer, xfs_buf_resubmit_failed_buffers() clears all the failed flags from the inde/dquot log items. In doing so, it also drops all the reference counts on the buffer that the failed log items hold. This means it can drop all the active references on the buffer and hence free the buffer before it queues it for write again. Putting the buffer on the delwri queue takes a reference to the buffer (so that it hangs around until it has been written and completed), but this goes bang if the buffer has already been freed. Hence we need to add the buffer to the delwri queue before we remove the failed flags from the log items attached to the buffer to ensure it always remains referenced during the resubmit process. Reported-by: Josef Bacik Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_buf_item.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 12d8455bfbb2..010db5f8fb00 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -1233,9 +1233,23 @@ xfs_buf_iodone( } /* - * Requeue a failed buffer for writeback + * Requeue a failed buffer for writeback. * - * Return true if the buffer has been re-queued properly, false otherwise + * We clear the log item failed state here as well, but we have to be careful + * about reference counts because the only active reference counts on the buffer + * may be the failed log items. Hence if we clear the log item failed state + * before queuing the buffer for IO we can release all active references to + * the buffer and free it, leading to use after free problems in + * xfs_buf_delwri_queue. It makes no difference to the buffer or log items which + * order we process them in - the buffer is locked, and we own the buffer list + * so nothing on them is going to change while we are performing this action. + * + * Hence we can safely queue the buffer for IO before we clear the failed log + * item state, therefore always having an active reference to the buffer and + * avoiding the transient zero-reference state that leads to use-after-free. + * + * Return true if the buffer was added to the buffer list, false if it was + * already on the buffer list. */ bool xfs_buf_resubmit_failed_buffers( @@ -1243,16 +1257,16 @@ xfs_buf_resubmit_failed_buffers( struct list_head *buffer_list) { struct xfs_log_item *lip; + bool ret; + + ret = xfs_buf_delwri_queue(bp, buffer_list); /* - * Clear XFS_LI_FAILED flag from all items before resubmit - * - * XFS_LI_FAILED set/clear is protected by ail_lock, caller this + * XFS_LI_FAILED set/clear is protected by ail_lock, caller of this * function already have it acquired */ list_for_each_entry(lip, &bp->b_li_list, li_bio_list) xfs_clear_li_failed(lip); - /* Add this buffer back to the delayed write list */ - return xfs_buf_delwri_queue(bp, buffer_list); + return ret; } From c08768977b9a65cab9bcfd1ba30ffb686b2b7c69 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:08 -0800 Subject: [PATCH 668/726] xfs: finobt AG reserves don't consider last AG can be a runt The last AG may be very small comapred to all other AGs, and hence AG reservations based on the superblock AG size may actually consume more space than the AG actually has. This results on assert failures like: XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319 [ 48.932891] xfs_ag_resv_init+0x1bd/0x1d0 [ 48.933853] xfs_fs_reserve_ag_blocks+0x37/0xb0 [ 48.934939] xfs_mountfs+0x5b3/0x920 [ 48.935804] xfs_fs_fill_super+0x462/0x640 [ 48.936784] ? xfs_test_remount_options+0x60/0x60 [ 48.937908] mount_bdev+0x178/0x1b0 [ 48.938751] mount_fs+0x36/0x170 [ 48.939533] vfs_kern_mount.part.43+0x54/0x130 [ 48.940596] do_mount+0x20e/0xcb0 [ 48.941396] ? memdup_user+0x3e/0x70 [ 48.942249] ksys_mount+0xba/0xd0 [ 48.943046] __x64_sys_mount+0x21/0x30 [ 48.943953] do_syscall_64+0x54/0x170 [ 48.944835] entry_SYSCALL_64_after_hwframe+0x49/0xbe Hence we need to ensure the finobt per-ag space reservations take into account the size of the last AG rather than treat it like all the other full size AGs. Note that both refcountbt and rmapbt already take the size of the AG into account via reading the AGF length directly. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_ialloc_btree.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ialloc_btree.c b/fs/xfs/libxfs/xfs_ialloc_btree.c index 86c50208a143..7fbf8af0b159 100644 --- a/fs/xfs/libxfs/xfs_ialloc_btree.c +++ b/fs/xfs/libxfs/xfs_ialloc_btree.c @@ -538,15 +538,18 @@ xfs_inobt_rec_check_count( static xfs_extlen_t xfs_inobt_max_size( - struct xfs_mount *mp) + struct xfs_mount *mp, + xfs_agnumber_t agno) { + xfs_agblock_t agblocks = xfs_ag_block_count(mp, agno); + /* Bail out if we're uninitialized, which can happen in mkfs. */ if (mp->m_inobt_mxr[0] == 0) return 0; return xfs_btree_calc_size(mp->m_inobt_mnr, - (uint64_t)mp->m_sb.sb_agblocks * mp->m_sb.sb_inopblock / - XFS_INODES_PER_CHUNK); + (uint64_t)agblocks * mp->m_sb.sb_inopblock / + XFS_INODES_PER_CHUNK); } static int @@ -594,7 +597,7 @@ xfs_finobt_calc_reserves( if (error) return error; - *ask += xfs_inobt_max_size(mp); + *ask += xfs_inobt_max_size(mp, agno); *used += tree_len; return 0; } From 7f9f71be84bcab368e58020a42f6d0dd97adf0ce Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:09 -0800 Subject: [PATCH 669/726] xfs: extent shifting doesn't fully invalidate page cache The extent shifting code uses a flush and invalidate mechainsm prior to shifting extents around. This is similar to what xfs_free_file_space() does, but it doesn't take into account things like page cache vs block size differences, and it will fail if there is a page that it currently busy. xfs_flush_unmap_range() handles all of these cases, so just convert xfs_prepare_shift() to us that mechanism rather than having it's own special sauce. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_bmap_util.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 5d263dfdb3bc..167ff4297e5c 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1195,13 +1195,7 @@ xfs_prepare_shift( * Writeback and invalidate cache for the remainder of the file as we're * about to shift down every extent from offset to EOF. */ - error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, offset, -1); - if (error) - return error; - error = invalidate_inode_pages2_range(VFS_I(ip)->i_mapping, - offset >> PAGE_SHIFT, -1); - if (error) - return error; + error = xfs_flush_unmap_range(ip, offset, XFS_ISIZE(ip)); /* * Clean out anything hanging around in the cow fork now that From a5d0f4565996e5595a10cb57b3d1e3d74379c502 Mon Sep 17 00:00:00 2001 From: Kenneth Feng Date: Mon, 19 Nov 2018 14:49:16 +0800 Subject: [PATCH 670/726] drm/amdgpu: Enable HDP memory light sleep Due to the register name and setting change of HDP memory light sleep on Vega20,change accordingly in the driver. Signed-off-by: Kenneth Feng Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/soc15.c | 39 ++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index bf5e6a413dee..4cc0dcb1a187 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -65,6 +65,13 @@ #define mmMP0_MISC_LIGHT_SLEEP_CTRL 0x01ba #define mmMP0_MISC_LIGHT_SLEEP_CTRL_BASE_IDX 0 +/* for Vega20 register name change */ +#define mmHDP_MEM_POWER_CTRL 0x00d4 +#define HDP_MEM_POWER_CTRL__IPH_MEM_POWER_CTRL_EN_MASK 0x00000001L +#define HDP_MEM_POWER_CTRL__IPH_MEM_POWER_LS_EN_MASK 0x00000002L +#define HDP_MEM_POWER_CTRL__RC_MEM_POWER_CTRL_EN_MASK 0x00010000L +#define HDP_MEM_POWER_CTRL__RC_MEM_POWER_LS_EN_MASK 0x00020000L +#define mmHDP_MEM_POWER_CTRL_BASE_IDX 0 /* * Indirect registers accessor */ @@ -870,15 +877,33 @@ static void soc15_update_hdp_light_sleep(struct amdgpu_device *adev, bool enable { uint32_t def, data; - def = data = RREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_LS)); + if (adev->asic_type == CHIP_VEGA20) { + def = data = RREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_CTRL)); - if (enable && (adev->cg_flags & AMD_CG_SUPPORT_HDP_LS)) - data |= HDP_MEM_POWER_LS__LS_ENABLE_MASK; - else - data &= ~HDP_MEM_POWER_LS__LS_ENABLE_MASK; + if (enable && (adev->cg_flags & AMD_CG_SUPPORT_HDP_LS)) + data |= HDP_MEM_POWER_CTRL__IPH_MEM_POWER_CTRL_EN_MASK | + HDP_MEM_POWER_CTRL__IPH_MEM_POWER_LS_EN_MASK | + HDP_MEM_POWER_CTRL__RC_MEM_POWER_CTRL_EN_MASK | + HDP_MEM_POWER_CTRL__RC_MEM_POWER_LS_EN_MASK; + else + data &= ~(HDP_MEM_POWER_CTRL__IPH_MEM_POWER_CTRL_EN_MASK | + HDP_MEM_POWER_CTRL__IPH_MEM_POWER_LS_EN_MASK | + HDP_MEM_POWER_CTRL__RC_MEM_POWER_CTRL_EN_MASK | + HDP_MEM_POWER_CTRL__RC_MEM_POWER_LS_EN_MASK); - if (def != data) - WREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_LS), data); + if (def != data) + WREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_CTRL), data); + } else { + def = data = RREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_LS)); + + if (enable && (adev->cg_flags & AMD_CG_SUPPORT_HDP_LS)) + data |= HDP_MEM_POWER_LS__LS_ENABLE_MASK; + else + data &= ~HDP_MEM_POWER_LS__LS_ENABLE_MASK; + + if (def != data) + WREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_LS), data); + } } static void soc15_update_drm_clock_gating(struct amdgpu_device *adev, bool enable) From b1d982330134bbba371821bc850da6fa4bfa3271 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 20 Nov 2018 21:22:50 +0100 Subject: [PATCH 671/726] MAINTAINERS: add myself as co-maintainer for r8169 Meanwhile I know the driver quite well and I refactored bigger parts of it. As a result people contact me already with r8169 questions. Therefore I'd volunteer to become co-maintainer of the driver also officially. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index d258515ac117..9aa47eeb469d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -180,6 +180,7 @@ F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER M: Realtek linux nic maintainers +M: Heiner Kallweit L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/realtek/r8169.c From f2cbd485282014132851bf37cb2ca624a456275d Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Tue, 20 Nov 2018 22:18:44 +0100 Subject: [PATCH 672/726] net/sched: act_police: fix race condition on state variables after 'police' configuration parameters were converted to use RCU instead of spinlock, the state variables used to compute the traffic rate (namely 'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in the traffic path without any protection. Use a dedicated spinlock to avoid race conditions on these variables, and ensure proper cache-line alignment. In this way, 'police' is still faster than what we observed when 'tcf_lock' was used in the traffic path _ i.e. reverting commit 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path"). Moreover, we preserve the throughput improvement that was obtained after 'police' started using per-cpu counters, when 'avrate' is used instead of 'rate'. Changes since v1 (thanks to Eric Dumazet): - call ktime_get_ns() before acquiring the lock in the traffic path - use a dedicated spinlock instead of tcf_lock - improve cache-line usage Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path") Reported-and-suggested-by: Eric Dumazet Signed-off-by: Davide Caratti Reviewed-by: Eric Dumazet --- net/sched/act_police.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 052855d47354..ee4665a5a022 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -27,10 +27,7 @@ struct tcf_police_params { u32 tcfp_ewma_rate; s64 tcfp_burst; u32 tcfp_mtu; - s64 tcfp_toks; - s64 tcfp_ptoks; s64 tcfp_mtu_ptoks; - s64 tcfp_t_c; struct psched_ratecfg rate; bool rate_present; struct psched_ratecfg peak; @@ -41,6 +38,11 @@ struct tcf_police_params { struct tcf_police { struct tc_action common; struct tcf_police_params __rcu *params; + + spinlock_t tcfp_lock ____cacheline_aligned_in_smp; + s64 tcfp_toks; + s64 tcfp_ptoks; + s64 tcfp_t_c; }; #define to_police(pc) ((struct tcf_police *)pc) @@ -186,12 +188,9 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, } new->tcfp_burst = PSCHED_TICKS2NS(parm->burst); - new->tcfp_toks = new->tcfp_burst; - if (new->peak_present) { + if (new->peak_present) new->tcfp_mtu_ptoks = (s64)psched_l2t_ns(&new->peak, new->tcfp_mtu); - new->tcfp_ptoks = new->tcfp_mtu_ptoks; - } if (tb[TCA_POLICE_AVRATE]) new->tcfp_ewma_rate = nla_get_u32(tb[TCA_POLICE_AVRATE]); @@ -207,7 +206,12 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, } spin_lock_bh(&police->tcf_lock); - new->tcfp_t_c = ktime_get_ns(); + spin_lock_bh(&police->tcfp_lock); + police->tcfp_t_c = ktime_get_ns(); + police->tcfp_toks = new->tcfp_burst; + if (new->peak_present) + police->tcfp_ptoks = new->tcfp_mtu_ptoks; + spin_unlock_bh(&police->tcfp_lock); police->tcf_action = parm->action; rcu_swap_protected(police->params, new, @@ -257,25 +261,28 @@ static int tcf_police_act(struct sk_buff *skb, const struct tc_action *a, } now = ktime_get_ns(); - toks = min_t(s64, now - p->tcfp_t_c, p->tcfp_burst); + spin_lock_bh(&police->tcfp_lock); + toks = min_t(s64, now - police->tcfp_t_c, p->tcfp_burst); if (p->peak_present) { - ptoks = toks + p->tcfp_ptoks; + ptoks = toks + police->tcfp_ptoks; if (ptoks > p->tcfp_mtu_ptoks) ptoks = p->tcfp_mtu_ptoks; ptoks -= (s64)psched_l2t_ns(&p->peak, qdisc_pkt_len(skb)); } - toks += p->tcfp_toks; + toks += police->tcfp_toks; if (toks > p->tcfp_burst) toks = p->tcfp_burst; toks -= (s64)psched_l2t_ns(&p->rate, qdisc_pkt_len(skb)); if ((toks|ptoks) >= 0) { - p->tcfp_t_c = now; - p->tcfp_toks = toks; - p->tcfp_ptoks = ptoks; + police->tcfp_t_c = now; + police->tcfp_toks = toks; + police->tcfp_ptoks = ptoks; + spin_unlock_bh(&police->tcfp_lock); ret = p->tcfp_result; goto inc_drops; } + spin_unlock_bh(&police->tcfp_lock); } inc_overlimits: From f8577fb3c273bcae821a5254c8fbcf82016d9a8d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 19 Nov 2018 15:41:53 +0000 Subject: [PATCH 673/726] drm/i915: Write GPU relocs harder with gen3 Under moderate amounts of GPU stress, we can observe on Bearlake and Pineview (later gen3 models) that we execute the following batch buffer before the write into the batch is coherent. Adding extra (tested with upto 32x) MI_FLUSH to either the invalidation, flush or both phases does not solve the incoherency issue with the relocations, but emitting the MI_STORE_DWORD_IMM twice does. So be it. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk (cherry picked from commit 7fa28e146994da1e8a4124623d7da97b798ea520) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 1aaccbe7e1de..d4fac09095f8 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1268,7 +1268,7 @@ relocate_entry(struct i915_vma *vma, else if (gen >= 4) len = 4; else - len = 3; + len = 6; batch = reloc_gpu(eb, vma, len); if (IS_ERR(batch)) @@ -1309,6 +1309,11 @@ relocate_entry(struct i915_vma *vma, *batch++ = MI_STORE_DWORD_IMM | MI_MEM_VIRTUAL; *batch++ = addr; *batch++ = target_offset; + + /* And again for good measure (blb/pnv) */ + *batch++ = MI_STORE_DWORD_IMM | MI_MEM_VIRTUAL; + *batch++ = addr; + *batch++ = target_offset; } goto out; From 8fd3b90300bec541806dac271de2fd44e2e4e2d2 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Thu, 15 Nov 2018 17:32:48 +0100 Subject: [PATCH 674/726] drm/fb-helper: Blacklist writeback when adding connectors to fbdev Writeback connectors do not produce any on-screen output and require special care for use. Such connectors are hidden from enumeration in DRM resources by default, but they are still picked-up by fbdev. This makes rather little sense since fbdev is not really adapted for dealing with writeback. Moreover, this is also a source of issues when userspace disables the CRTC (and associated plane) without detaching the CRTC from the connector (which is hidden by default). In this case, the connector is still using the CRTC, leading to am "enabled/connectors mismatch" and eventually the failure of the associated atomic commit. This situation happens with VC4 testing under IGT GPU Tools. Filter out writeback connectors in the fbdev helper to solve this. Signed-off-by: Paul Kocialkowski Reviewed-by: Boris Brezillon Reviewed-by: Maxime Ripard Tested-by: Maxime Ripard Fixes: 935774cd71fe ("drm: Add writeback connector type") Cc: # v4.19+ Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com --- drivers/gpu/drm/drm_fb_helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index a502f3e519fd..dd852a25d375 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -219,6 +219,9 @@ int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper) mutex_lock(&fb_helper->lock); drm_connector_list_iter_begin(dev, &conn_iter); drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) + continue; + ret = __drm_fb_helper_add_one_connector(fb_helper, connector); if (ret) goto fail; From 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 19 Nov 2018 19:06:01 +0100 Subject: [PATCH 675/726] ACPI / platform: Add SMB0001 HID to forbidden_id_list Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523 Reported-by: Lukas Kahnert Tested-by: Marc Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index eaa60c94205a..1f32caa87686 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -30,6 +30,7 @@ static const struct acpi_device_id forbidden_id_list[] = { {"PNP0200", 0}, /* AT DMA Controller */ {"ACPI0009", 0}, /* IOxAPIC */ {"ACPI000A", 0}, /* IOAPIC */ + {"SMB0001", 0}, /* ACPI SMBUS virtual device */ {"", 0}, }; From c773058dde9a4f919a8069f3828d9f4adb1fce1e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 20 Nov 2018 15:54:49 +0200 Subject: [PATCH 676/726] drm/i915: Force a LUT update in intel_initial_commit() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we force a plane update to fix up our half populated plane state we'll also force on the pipe gamma for the plane (since we always enable pipe gamma currently). If the BIOS hasn't programmed a sensible LUT into the hardware this will cause the image to become corrupted. Typical symptoms are a purple/yellow/etc. flash when the driver loads. To avoid this let's program something sensible into the LUT when we do the plane update. In the future I plan to add proper plane gamma enable readout so this is just a temporary measure. Cc: Hans de Goede Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede Reviewed-by: Rodrigo Vivi (cherry picked from commit fa6af5145b4e87a30a530be0d80734a9dd40da77) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a54843fdeb2f..fa6c1bad5ef7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -15267,6 +15267,14 @@ retry: ret = drm_atomic_add_affected_planes(state, crtc); if (ret) goto out; + + /* + * FIXME hack to force a LUT update to avoid the + * plane update forcing the pipe gamma on without + * having a proper LUT loaded. Remove once we + * have readout for pipe gamma enable. + */ + crtc_state->color_mgmt_changed = true; } } From f559156c399cfb11d53a128d210118fbea36816e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 20 Nov 2018 15:54:50 +0200 Subject: [PATCH 677/726] drm/i915: Add rotation readout for plane initial config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we need to force a full plane update before userspace/fbdev have given us a proper plane state we should try to maintain the current plane state as much as possible (apart from the parts of the state we're trying to fix up with the plane update). To that end add basic readout for the plane rotation and maintain it during the initial fb takeover. Cc: Hans de Goede Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com Tested-by: Hans de Goede Reviewed-by: Rodrigo Vivi Reviewed-by: Maarten Lankhorst (cherry picked from commit f43348a3db89305bb1935da9fe4499fdcdde9796) Signed-off-by: Joonas Lahtinen --- drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 2 files changed, 32 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fa6c1bad5ef7..c9878dd1f7cd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2890,6 +2890,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, return; valid_fb: + intel_state->base.rotation = plane_config->rotation; intel_fill_fb_ggtt_view(&intel_state->view, fb, intel_state->base.rotation); intel_state->color_plane[0].stride = @@ -7882,8 +7883,15 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc, plane_config->tiling = I915_TILING_X; fb->modifier = I915_FORMAT_MOD_X_TILED; } + + if (val & DISPPLANE_ROTATE_180) + plane_config->rotation = DRM_MODE_ROTATE_180; } + if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B && + val & DISPPLANE_MIRROR) + plane_config->rotation |= DRM_MODE_REFLECT_X; + pixel_format = val & DISPPLANE_PIXFORMAT_MASK; fourcc = i9xx_format_to_fourcc(pixel_format); fb->format = drm_format_info(fourcc); @@ -8952,6 +8960,29 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, goto error; } + /* + * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr + * while i915 HW rotation is clockwise, thats why this swapping. + */ + switch (val & PLANE_CTL_ROTATE_MASK) { + case PLANE_CTL_ROTATE_0: + plane_config->rotation = DRM_MODE_ROTATE_0; + break; + case PLANE_CTL_ROTATE_90: + plane_config->rotation = DRM_MODE_ROTATE_270; + break; + case PLANE_CTL_ROTATE_180: + plane_config->rotation = DRM_MODE_ROTATE_180; + break; + case PLANE_CTL_ROTATE_270: + plane_config->rotation = DRM_MODE_ROTATE_90; + break; + } + + if (INTEL_GEN(dev_priv) >= 10 && + val & PLANE_CTL_FLIP_HORIZONTAL) + plane_config->rotation |= DRM_MODE_REFLECT_X; + base = I915_READ(PLANE_SURF(pipe, plane_id)) & 0xfffff000; plane_config->base = base; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 8b298e5f012d..db6fa1d0cbda 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -547,6 +547,7 @@ struct intel_initial_plane_config { unsigned int tiling; int size; u32 base; + u8 rotation; }; #define SKL_MIN_SRC_W 8 From b34087157dd76e8d96e5e52808134a791ac61e57 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 21 Nov 2018 16:00:50 +0000 Subject: [PATCH 678/726] dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB With the overflow buffer removed, we no longer have a unique address which is guaranteed not to be a valid DMA target to use as an error token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent an unlikely DMA target, but unfortunately there are already SWIOTLB users with DMA-able memory at physical address 0 which now gets falsely treated as a mapping failure and leads to all manner of misbehaviour. The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the other commonly-used error value of all-bits-set, since the last single byte of memory is by far the least-likely-valid DMA target. Fixes: dff8d6c1ed58 ("swiotlb: remove the overflow buffer") Reported-by: John Stultz Tested-by: John Stultz Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Robin Murphy Signed-off-by: Christoph Hellwig --- include/linux/dma-direct.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h index bd73e7a91410..9e66bfe369aa 100644 --- a/include/linux/dma-direct.h +++ b/include/linux/dma-direct.h @@ -5,7 +5,7 @@ #include #include -#define DIRECT_MAPPING_ERROR 0 +#define DIRECT_MAPPING_ERROR (~(dma_addr_t)0) #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA #include From cb216b84d6ea24fa10f1e7aac35de77246841041 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 21 Nov 2018 16:00:51 +0000 Subject: [PATCH 679/726] swiotlb: Skip cache maintenance on map error If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may lead to such delights as performing cache maintenance on whatever address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically outside the kernel memory map and goes about as well as expected. Don't do that. Fixes: a4a4330db46a ("swiotlb: add support for non-coherent DMA") Tested-by: John Stultz Signed-off-by: Robin Murphy Signed-off-by: Christoph Hellwig --- kernel/dma/swiotlb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 5731daa09a32..045930e32c0e 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -679,7 +679,8 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page, } if (!dev_is_dma_coherent(dev) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) + (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0 && + dev_addr != DIRECT_MAPPING_ERROR) arch_sync_dma_for_device(dev, phys, size, dir); return dev_addr; From 2c307174ab77e34645e75e12827646e044d273c3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:10 -0800 Subject: [PATCH 680/726] xfs: flush removing page cache in xfs_reflink_remap_prep On a sub-page block size filesystem, fsx is failing with a data corruption after a series of operations involving copying a file with the destination offset beyond EOF of the destination of the file: 8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW 8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes) 8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400 8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE 8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00 The second copy here is beyond EOF, and it is to sub-page (4k) but block aligned (1k) offset. The clone runs the EOF zeroing, landing in a pre-existing post-eof delalloc extent. This zeroes the post-eof extents in the page cache just fine, dirtying the pages correctly. The problem is that xfs_reflink_remap_prep() now truncates the page cache over the range that it is copying it to, and rounds that down to cover the entire start page. This removes the dirty page over the delalloc extent from the page cache without having written it back. Hence later, when the page cache is flushed, the page at offset 0x6f000 has not been written back and hence exposes stale data, which fsx trips over less than 10 operations later. Fix this by changing xfs_reflink_remap_prep() to use xfs_flush_unmap_range(). Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_bmap_util.c | 2 +- fs/xfs/xfs_bmap_util.h | 3 +++ fs/xfs/xfs_reflink.c | 17 +++++++++++++---- 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 167ff4297e5c..404e581f1ea1 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1042,7 +1042,7 @@ out_trans_cancel: goto out_unlock; } -static int +int xfs_flush_unmap_range( struct xfs_inode *ip, xfs_off_t offset, diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h index 87363d136bb6..7a78229cf1a7 100644 --- a/fs/xfs/xfs_bmap_util.h +++ b/fs/xfs/xfs_bmap_util.h @@ -80,4 +80,7 @@ int xfs_bmap_count_blocks(struct xfs_trans *tp, struct xfs_inode *ip, int whichfork, xfs_extnum_t *nextents, xfs_filblks_t *count); +int xfs_flush_unmap_range(struct xfs_inode *ip, xfs_off_t offset, + xfs_off_t len); + #endif /* __XFS_BMAP_UTIL_H__ */ diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c index c56bdbfcf7ae..322a852ce284 100644 --- a/fs/xfs/xfs_reflink.c +++ b/fs/xfs/xfs_reflink.c @@ -1352,10 +1352,19 @@ xfs_reflink_remap_prep( if (ret) goto out_unlock; - /* Zap any page cache for the destination file's range. */ - truncate_inode_pages_range(&inode_out->i_data, - round_down(pos_out, PAGE_SIZE), - round_up(pos_out + *len, PAGE_SIZE) - 1); + /* + * If pos_out > EOF, we may have dirtied blocks between EOF and + * pos_out. In that case, we need to extend the flush and unmap to cover + * from EOF to the end of the copy length. + */ + if (pos_out > XFS_ISIZE(dest)) { + loff_t flen = *len + (pos_out - XFS_ISIZE(dest)); + ret = xfs_flush_unmap_range(dest, XFS_ISIZE(dest), flen); + } else { + ret = xfs_flush_unmap_range(dest, pos_out, *len); + } + if (ret) + goto out_unlock; return 1; out_unlock: From 9230a0b65b47fe6856c4468ec0175c4987e5bede Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 22:50:08 -0800 Subject: [PATCH 681/726] xfs: delalloc -> unwritten COW fork allocation can go wrong Long saga. There have been days spent following this through dead end after dead end in multi-GB event traces. This morning, after writing a trace-cmd wrapper that enabled me to be more selective about XFS trace points, I discovered that I could get just enough essential tracepoints enabled that there was a 50:50 chance the fsx config would fail at ~115k ops. If it didn't fail at op 115547, I stopped fsx at op 115548 anyway. That gave me two traces - one where the problem manifested, and one where it didn't. After refining the traces to have the necessary information, I found that in the failing case there was a real extent in the COW fork compared to an unwritten extent in the working case. Walking back through the two traces to the point where the CWO fork extents actually diverged, I found that the bad case had an extra unwritten extent in it. This is likely because the bug it led me to had triggered multiple times in those 115k ops, leaving stray COW extents around. What I saw was a COW delalloc conversion to an unwritten extent (as they should always be through xfs_iomap_write_allocate()) resulted in a /written extent/: xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0 xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex Basically, Cow fork before: 0 1 32 52 +H+DDDDDDDDDDDD+UUUUUUUUUUU+ PREV RIGHT COW delalloc conversion allocates: 1 32 +uuuuuuuuuuuu+ NEW And the result according to the xfs_bmap_post_update trace was: 0 1 32 52 +H+wwwwwwwwwwwwwwwwwwwwwwww+ PREV Which is clearly wrong - it should be a merged unwritten extent, not an unwritten extent. That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG case in xfs_bmap_add_extent_delay_real(), and sure enough, there's the bug. It takes the old delalloc extent (PREV) and adds the length of the RIGHT extent to it, takes the start block from NEW, removes the RIGHT extent and then updates PREV with the new extent. What it fails to do is update PREV.br_state. For delalloc, this is always XFS_EXT_NORM, while in this case we are converting the delayed allocation to unwritten, so it needs to be updated to XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so the resultant extent is always written. And that's the bug I've been chasing for a week - a bmap btree bug, not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced with the recent in core extent tree scalability enhancements. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_bmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index 74d7228e755b..19e921d1586f 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -1694,10 +1694,13 @@ xfs_bmap_add_extent_delay_real( case BMAP_LEFT_FILLING | BMAP_RIGHT_FILLING | BMAP_RIGHT_CONTIG: /* * Filling in all of a previously delayed allocation extent. - * The right neighbor is contiguous, the left is not. + * The right neighbor is contiguous, the left is not. Take care + * with delay -> unwritten extent allocation here because the + * delalloc record we are overwriting is always written. */ PREV.br_startblock = new->br_startblock; PREV.br_blockcount += RIGHT.br_blockcount; + PREV.br_state = new->br_state; xfs_iext_next(ifp, &bma->icur); xfs_iext_remove(bma->ip, &bma->icur, state); From 0929d8580071c6a1cec1a7916a8f674c243ceee1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:10 -0800 Subject: [PATCH 682/726] iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents When we write into an unwritten extent via direct IO, we dirty metadata on IO completion to convert the unwritten extent to written. However, when we do the FUA optimisation checks, the inode may be clean and so we issue a FUA write into the unwritten extent. This means we then bypass the generic_write_sync() call after unwritten extent conversion has ben done and we don't force the modified metadata to stable storage. This violates O_DSYNC semantics. The window of exposure is a single IO, as the next DIO write will see the inode has dirty metadata and hence will not use the FUA optimisation. Calling generic_write_sync() after completion of the second IO will also sync the first write and it's metadata. Fix this by avoiding the FUA optimisation when writing to unwritten extents. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/iomap.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/iomap.c b/fs/iomap.c index 64ce240217a1..72f3864a2e6b 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -1596,12 +1596,13 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, if (iomap->flags & IOMAP_F_NEW) { need_zeroout = true; - } else { + } else if (iomap->type == IOMAP_MAPPED) { /* - * Use a FUA write if we need datasync semantics, this - * is a pure data IO that doesn't require any metadata - * updates and the underlying device supports FUA. This - * allows us to avoid cache flushes on IO completion. + * Use a FUA write if we need datasync semantics, this is a pure + * data IO that doesn't require any metadata updates (including + * after IO completion such as unwritten extent conversion) and + * the underlying device supports FUA. This allows us to avoid + * cache flushes on IO completion. */ if (!(iomap->flags & (IOMAP_F_SHARED|IOMAP_F_DIRTY)) && (dio->flags & IOMAP_DIO_WRITE_FUA) && From b450672fb66b4a991a5b55ee24209ac7ae7690ce Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:10 -0800 Subject: [PATCH 683/726] iomap: sub-block dio needs to zeroout beyond EOF If we are doing sub-block dio that extends EOF, we need to zero the unused tail of the block to initialise the data in it it. If we do not zero the tail of the block, then an immediate mmap read of the EOF block will expose stale data beyond EOF to userspace. Found with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations. Fix this by detecting if the end of the DIO write is beyond EOF and zeroing the tail if necessary. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/iomap.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/iomap.c b/fs/iomap.c index 72f3864a2e6b..77c214194edf 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -1677,7 +1677,14 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, dio->submit.cookie = submit_bio(bio); } while (nr_pages); - if (need_zeroout) { + /* + * We need to zeroout the tail of a sub-block write if the extent type + * requires zeroing or the write extends beyond EOF. If we don't zero + * the block tail in the latter case, we can expose stale data via mmap + * reads of the EOF block. + */ + if (need_zeroout || + ((dio->flags & IOMAP_DIO_WRITE) && pos >= i_size_read(inode))) { /* zero out from the end of the write to the end of the block */ pad = pos & (fs_block_size - 1); if (pad) From 4721a6010990971440b4ffefbdf014976b8eda2f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:11 -0800 Subject: [PATCH 684/726] iomap: dio data corruption and spurious errors when pipes fill When doing direct IO to a pipe for do_splice_direct(), then pipe is trivial to fill up and overflow as it can only hold 16 pages. At this point bio_iov_iter_get_pages() then returns -EFAULT, and we abort the IO submission process. Unfortunately, iomap_dio_rw() propagates the error back up the stack. The error is converted from the EFAULT to EAGAIN in generic_file_splice_read() to tell the splice layers that the pipe is full. do_splice_direct() completely fails to handle EAGAIN errors (it aborts on error) and returns EAGAIN to the caller. copy_file_write() then completely fails to handle EAGAIN as well, and so returns EAGAIN to userspace, having failed to copy the data it was asked to. Avoid this whole steaming pile of fail by having iomap_dio_rw() silently swallow EFAULT errors and so do short reads. To make matters worse, iomap_dio_actor() has a stale data exposure bug bio_iov_iter_get_pages() fails - it does not zero the tail block that it may have been left uncovered by partial IO. Fix the error handling case to drop to the sub-block zeroing rather than immmediately returning the -EFAULT error. Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Darrick J. Wong --- fs/iomap.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/fs/iomap.c b/fs/iomap.c index 77c214194edf..d51e7a2ae641 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -1580,7 +1580,7 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, struct bio *bio; bool need_zeroout = false; bool use_fua = false; - int nr_pages, ret; + int nr_pages, ret = 0; size_t copied = 0; if ((pos | length | align) & ((1 << blkbits) - 1)) @@ -1645,8 +1645,14 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, ret = bio_iov_iter_get_pages(bio, &iter); if (unlikely(ret)) { + /* + * We have to stop part way through an IO. We must fall + * through to the sub-block tail zeroing here, otherwise + * this short IO may expose stale data in the tail of + * the block we haven't written data to. + */ bio_put(bio); - return copied ? copied : ret; + goto zero_tail; } n = bio->bi_iter.bi_size; @@ -1683,6 +1689,7 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, * the block tail in the latter case, we can expose stale data via mmap * reads of the EOF block. */ +zero_tail: if (need_zeroout || ((dio->flags & IOMAP_DIO_WRITE) && pos >= i_size_read(inode))) { /* zero out from the end of the write to the end of the block */ @@ -1690,7 +1697,7 @@ iomap_dio_bio_actor(struct inode *inode, loff_t pos, loff_t length, if (pad) iomap_dio_zero(dio, iomap, pos, fs_block_size - pad); } - return copied; + return copied ? copied : ret; } static loff_t @@ -1865,6 +1872,15 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, dio->wait_for_completion = true; ret = 0; } + + /* + * Splicing to pipes can fail on a full pipe. We have to + * swallow this to make it look like a short IO + * otherwise the higher splice layers will completely + * mishandle the error and stop moving data. + */ + if (ret == -EFAULT) + ret = 0; break; } pos += ret; From 494633fac7896afc2bce6f83fe7319946270540b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 19 Nov 2018 13:31:12 -0800 Subject: [PATCH 685/726] vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP It returns EINVAL when the operation is not supported by the filesystem. Fix it to return EOPNOTSUPP to be consistent with the man page and clone_file_range(). Clean up the inconsistent error return handling while I'm there. (I know, lipstick on a pig, but every little bit helps...) Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/read_write.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/read_write.c b/fs/read_write.c index bfcb4ced5664..4dae0399c75a 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -2094,17 +2094,18 @@ int vfs_dedupe_file_range(struct file *file, struct file_dedupe_range *same) off = same->src_offset; len = same->src_length; - ret = -EISDIR; if (S_ISDIR(src->i_mode)) - goto out; + return -EISDIR; - ret = -EINVAL; if (!S_ISREG(src->i_mode)) - goto out; + return -EINVAL; + + if (!file->f_op->remap_file_range) + return -EOPNOTSUPP; ret = remap_verify_area(file, off, len, false); if (ret < 0) - goto out; + return ret; ret = 0; if (off + len > i_size_read(src)) @@ -2147,10 +2148,8 @@ next_fdput: fdput(dst_fd); next_loop: if (fatal_signal_pending(current)) - goto out; + break; } - -out: return ret; } EXPORT_SYMBOL(vfs_dedupe_file_range); From 8c110d43c6bca4b24dd13272a9d4e0ba6f2ec957 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 21 Nov 2018 08:06:37 -0800 Subject: [PATCH 686/726] iomap: readpages doesn't zero page tail beyond EOF When we read the EOF page of the file via readpages, we need to zero the region beyond EOF that we either do not read or should not contain data so that mmap does not expose stale data to user applications. However, iomap_adjust_read_range() fails to detect EOF correctly, and so fsx on 1k block size filesystems fails very quickly with mapreads exposing data beyond EOF. There are two problems here. Firstly, when calculating the end block of the EOF byte, we have to round the size by one to avoid a block aligned EOF from reporting a block too large. i.e. a size of 1024 bytes is 1 block, which in index terms is block 0. Therefore we have to calculate the end block from (isize - 1), not isize. The second bug is determining if the current page spans EOF, and so whether we need split it into two half, one for the IO, and the other for zeroing. Unfortunately, the code that checks whether we should split the block doesn't actually check if we span EOF, it just checks if the read spans the /offset in the page/ that EOF sits on. So it splits every read into two if EOF is not page aligned, regardless of whether we are reading the EOF block or not. Hence we need to restrict the "does the read span EOF" check to just the page that spans EOF, not every page we read. This patch results in correct EOF detection through readpages: xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24 xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4 iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864 xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864 iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864 iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864 As you can see, it now does full page reads until the last one which is split correctly at the block aligned EOF, reading 3072 bytes and zeroing the last 1024 bytes. The original version of the patch got this right, but it got another case wrong. The EOF detection crossing really needs to the the original length as plen, while it starts at the end of the block, will be shortened as up-to-date blocks are found on the page. This means "orig_pos + plen" no longer points to the end of the page, and so will not correctly detect EOF crossing. Hence we have to use the length passed in to detect this partial page case: xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0 xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1 xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4 iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296 xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1 iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296 Heere we see a trace where the first block on the EOF page is up to date, hence poff = 1024 bytes. The offset into the page of EOF is 3072, so the range we want to read is 1024 - 3071, and the range we want to zero is 3072 - 4095. You can see this is split correctly now. This fixes the stale data beyond EOF problem that fsx quickly uncovers on 1k block size filesystems. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/iomap.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/iomap.c b/fs/iomap.c index d51e7a2ae641..3ffb776fbebe 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -142,13 +142,14 @@ static void iomap_adjust_read_range(struct inode *inode, struct iomap_page *iop, loff_t *pos, loff_t length, unsigned *offp, unsigned *lenp) { + loff_t orig_pos = *pos; + loff_t isize = i_size_read(inode); unsigned block_bits = inode->i_blkbits; unsigned block_size = (1 << block_bits); unsigned poff = offset_in_page(*pos); unsigned plen = min_t(loff_t, PAGE_SIZE - poff, length); unsigned first = poff >> block_bits; unsigned last = (poff + plen - 1) >> block_bits; - unsigned end = offset_in_page(i_size_read(inode)) >> block_bits; /* * If the block size is smaller than the page size we need to check the @@ -183,8 +184,12 @@ iomap_adjust_read_range(struct inode *inode, struct iomap_page *iop, * handle both halves separately so that we properly zero data in the * page cache for blocks that are entirely outside of i_size. */ - if (first <= end && last > end) - plen -= (last - end) * block_size; + if (orig_pos <= isize && orig_pos + length > isize) { + unsigned end = offset_in_page(isize - 1) >> block_bits; + + if (first <= end && last > end) + plen -= (last - end) * block_size; + } *offp = poff; *lenp = plen; From b5dd186d10ba59e6b5ba60e42b3b083df56df6f3 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Tue, 20 Nov 2018 11:39:56 +0000 Subject: [PATCH 687/726] net: skb_scrub_packet(): Scrub offload_fwd_mark When a packet is trapped and the corresponding SKB marked as already-forwarded, it retains this marking even after it is forwarded across veth links into another bridge. There, since it ingresses the bridge over veth, which doesn't have offload_fwd_mark, it triggers a warning in nbp_switchdev_frame_mark(). Then nbp_switchdev_allowed_egress() decides not to allow egress from this bridge through another veth, because the SKB is already marked, and the mark (of 0) of course matches. Thus the packet is incorrectly blocked. Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That function is called from tunnels and also from veth, and thus catches the cases where traffic is forwarded between bridges and transformed in a way that invalidates the marking. Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field") Signed-off-by: Petr Machata Suggested-by: Ido Schimmel Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- net/core/skbuff.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index b4ee5c8b928f..a8217e221e19 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4854,6 +4854,11 @@ void skb_scrub_packet(struct sk_buff *skb, bool xnet) nf_reset(skb); nf_reset_trace(skb); +#ifdef CONFIG_NET_SWITCHDEV + skb->offload_fwd_mark = 0; + skb->offload_mr_fwd_mark = 0; +#endif + if (!xnet) return; From 86de5921a3d5dd246df661e09bdd0a6131b39ae3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 20 Nov 2018 05:53:59 -0800 Subject: [PATCH 688/726] tcp: defer SACK compression after DupThresh Jean-Louis reported a TCP regression and bisected to recent SACK compression. After a loss episode (receiver not able to keep up and dropping packets because its backlog is full), linux TCP stack is sending a single SACK (DUPACK). Sender waits a full RTO timer before recovering losses. While RFC 6675 says in section 5, "Algorithm Details", (2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true -- indicating at least three segments have arrived above the current cumulative acknowledgment point, which is taken to indicate loss -- go to step (4). ... (4) Invoke fast retransmit and enter loss recovery as follows: there are old TCP stacks not implementing this strategy, and still counting the dupacks before starting fast retransmit. While these stacks probably perform poorly when receivers implement LRO/GRO, we should be a little more gentle to them. This patch makes sure we do not enable SACK compression unless 3 dupacks have been sent since last rcv_nxt update. Ideally we should even rearm the timer to send one or two more DUPACK if no more packets are coming, but that will be work aiming for linux-4.21. Many thanks to Jean-Louis for bisecting the issue, providing packet captures and testing this patch. Fixes: 5d9f4262b7ea ("tcp: add SACK compression") Reported-by: Jean-Louis Dupond Tested-by: Jean-Louis Dupond Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- include/linux/tcp.h | 1 + net/ipv4/tcp_input.c | 14 ++++++++++++-- net/ipv4/tcp_output.c | 6 +++--- net/ipv4/tcp_timer.c | 2 +- 4 files changed, 17 insertions(+), 6 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8ed77bb4ed86..a9b0280687d5 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -196,6 +196,7 @@ struct tcp_sock { u32 rcv_tstamp; /* timestamp of last received ACK (for keepalives) */ u32 lsndtime; /* timestamp of last sent data packet (for restart window) */ u32 last_oow_ack_time; /* timestamp of last out-of-window ACK */ + u32 compressed_ack_rcv_nxt; u32 tsoffset; /* timestamp offset */ diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index e695584bb33f..1e37c1388189 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4268,7 +4268,7 @@ static void tcp_sack_new_ofo_skb(struct sock *sk, u32 seq, u32 end_seq) * If the sack array is full, forget about the last one. */ if (this_sack >= TCP_NUM_SACKS) { - if (tp->compressed_ack) + if (tp->compressed_ack > TCP_FASTRETRANS_THRESH) tcp_send_ack(sk); this_sack--; tp->rx_opt.num_sacks--; @@ -5189,7 +5189,17 @@ send_now: if (!tcp_is_sack(tp) || tp->compressed_ack >= sock_net(sk)->ipv4.sysctl_tcp_comp_sack_nr) goto send_now; - tp->compressed_ack++; + + if (tp->compressed_ack_rcv_nxt != tp->rcv_nxt) { + tp->compressed_ack_rcv_nxt = tp->rcv_nxt; + if (tp->compressed_ack > TCP_FASTRETRANS_THRESH) + NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPACKCOMPRESSED, + tp->compressed_ack - TCP_FASTRETRANS_THRESH); + tp->compressed_ack = 0; + } + + if (++tp->compressed_ack <= TCP_FASTRETRANS_THRESH) + goto send_now; if (hrtimer_is_queued(&tp->compressed_ack_timer)) return; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 9c34b97d365d..3f510cad0b3e 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -180,10 +180,10 @@ static inline void tcp_event_ack_sent(struct sock *sk, unsigned int pkts, { struct tcp_sock *tp = tcp_sk(sk); - if (unlikely(tp->compressed_ack)) { + if (unlikely(tp->compressed_ack > TCP_FASTRETRANS_THRESH)) { NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPACKCOMPRESSED, - tp->compressed_ack); - tp->compressed_ack = 0; + tp->compressed_ack - TCP_FASTRETRANS_THRESH); + tp->compressed_ack = TCP_FASTRETRANS_THRESH; if (hrtimer_try_to_cancel(&tp->compressed_ack_timer) == 1) __sock_put(sk); } diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 676020663ce8..5f8b6d3cd855 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -740,7 +740,7 @@ static enum hrtimer_restart tcp_compressed_ack_kick(struct hrtimer *timer) bh_lock_sock(sk); if (!sock_owned_by_user(sk)) { - if (tp->compressed_ack) + if (tp->compressed_ack > TCP_FASTRETRANS_THRESH) tcp_send_ack(sk); } else { if (!test_and_set_bit(TCP_DELACK_TIMER_DEFERRED, From f07920ad9c6f5781c90ac4915f8254d999d8c1cc Mon Sep 17 00:00:00 2001 From: Hans Wippel Date: Tue, 20 Nov 2018 16:46:39 +0100 Subject: [PATCH 689/726] net/smc: abort CLC connection in smc_release In case of a non-blocking SMC socket, the initial CLC handshake is performed over a blocking TCP connection in a worker. If the SMC socket is released, smc_release has to wait for the blocking CLC socket operations (e.g., kernel_connect) inside the worker. This patch aborts a CLC connection when the respective non-blocking SMC socket is released to avoid waiting on socket operations or timeouts. Signed-off-by: Hans Wippel Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 80e2119f1c70..84f67f601838 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -127,6 +127,8 @@ static int smc_release(struct socket *sock) smc = smc_sk(sk); /* cleanup for a dangling non-blocking connect */ + if (smc->connect_info && sk->sk_state == SMC_INIT) + tcp_abort(smc->clcsock->sk, ECONNABORTED); flush_work(&smc->connect_work); kfree(smc->connect_info); smc->connect_info = NULL; From ee05ff7af26509f39360534a5225ee714416cdfd Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Tue, 20 Nov 2018 16:46:40 +0100 Subject: [PATCH 690/726] net/smc: use queue pair number when matching link group When searching for an existing link group the queue pair number is also to be taken into consideration. When the SMC server sends a new number in a CLC packet (keeping all other values equal) then a new link group is to be created on the SMC client side. Signed-off-by: Karsten Graul Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 9 +++++---- net/smc/smc_core.c | 10 ++++++---- net/smc/smc_core.h | 2 +- 3 files changed, 12 insertions(+), 9 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 84f67f601838..5fbaf1901571 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -549,7 +549,8 @@ static int smc_connect_rdma(struct smc_sock *smc, mutex_lock(&smc_create_lgr_pending); local_contact = smc_conn_create(smc, false, aclc->hdr.flag, ibdev, - ibport, &aclc->lcl, NULL, 0); + ibport, ntoh24(aclc->qpn), &aclc->lcl, + NULL, 0); if (local_contact < 0) { if (local_contact == -ENOMEM) reason_code = SMC_CLC_DECL_MEM;/* insufficient memory*/ @@ -620,7 +621,7 @@ static int smc_connect_ism(struct smc_sock *smc, int rc = 0; mutex_lock(&smc_create_lgr_pending); - local_contact = smc_conn_create(smc, true, aclc->hdr.flag, NULL, 0, + local_contact = smc_conn_create(smc, true, aclc->hdr.flag, NULL, 0, 0, NULL, ismdev, aclc->gid); if (local_contact < 0) return smc_connect_abort(smc, SMC_CLC_DECL_MEM, 0); @@ -1085,7 +1086,7 @@ static int smc_listen_rdma_init(struct smc_sock *new_smc, int *local_contact) { /* allocate connection / link group */ - *local_contact = smc_conn_create(new_smc, false, 0, ibdev, ibport, + *local_contact = smc_conn_create(new_smc, false, 0, ibdev, ibport, 0, &pclc->lcl, NULL, 0); if (*local_contact < 0) { if (*local_contact == -ENOMEM) @@ -1109,7 +1110,7 @@ static int smc_listen_ism_init(struct smc_sock *new_smc, struct smc_clc_msg_smcd *pclc_smcd; pclc_smcd = smc_get_clc_msg_smcd(pclc); - *local_contact = smc_conn_create(new_smc, true, 0, NULL, 0, NULL, + *local_contact = smc_conn_create(new_smc, true, 0, NULL, 0, 0, NULL, ismdev, pclc_smcd->gid); if (*local_contact < 0) { if (*local_contact == -ENOMEM) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 18daebcef181..3c023de58afd 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -559,7 +559,7 @@ out: static bool smcr_lgr_match(struct smc_link_group *lgr, struct smc_clc_msg_local *lcl, - enum smc_lgr_role role) + enum smc_lgr_role role, u32 clcqpn) { return !memcmp(lgr->peer_systemid, lcl->id_for_peer, SMC_SYSTEMID_LEN) && @@ -567,7 +567,9 @@ static bool smcr_lgr_match(struct smc_link_group *lgr, SMC_GID_SIZE) && !memcmp(lgr->lnk[SMC_SINGLE_LINK].peer_mac, lcl->mac, sizeof(lcl->mac)) && - lgr->role == role; + lgr->role == role && + (lgr->role == SMC_SERV || + lgr->lnk[SMC_SINGLE_LINK].peer_qpn == clcqpn); } static bool smcd_lgr_match(struct smc_link_group *lgr, @@ -578,7 +580,7 @@ static bool smcd_lgr_match(struct smc_link_group *lgr, /* create a new SMC connection (and a new link group if necessary) */ int smc_conn_create(struct smc_sock *smc, bool is_smcd, int srv_first_contact, - struct smc_ib_device *smcibdev, u8 ibport, + struct smc_ib_device *smcibdev, u8 ibport, u32 clcqpn, struct smc_clc_msg_local *lcl, struct smcd_dev *smcd, u64 peer_gid) { @@ -603,7 +605,7 @@ int smc_conn_create(struct smc_sock *smc, bool is_smcd, int srv_first_contact, list_for_each_entry(lgr, &smc_lgr_list.list, list) { write_lock_bh(&lgr->conns_lock); if ((is_smcd ? smcd_lgr_match(lgr, smcd, peer_gid) : - smcr_lgr_match(lgr, lcl, role)) && + smcr_lgr_match(lgr, lcl, role, clcqpn)) && !lgr->sync_err && lgr->vlan_id == vlan_id && (role == SMC_CLNT || diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h index c156674733c9..5bc6cbaf0ed5 100644 --- a/net/smc/smc_core.h +++ b/net/smc/smc_core.h @@ -262,7 +262,7 @@ int smc_vlan_by_tcpsk(struct socket *clcsock, unsigned short *vlan_id); void smc_conn_free(struct smc_connection *conn); int smc_conn_create(struct smc_sock *smc, bool is_smcd, int srv_first_contact, - struct smc_ib_device *smcibdev, u8 ibport, + struct smc_ib_device *smcibdev, u8 ibport, u32 clcqpn, struct smc_clc_msg_local *lcl, struct smcd_dev *smcd, u64 peer_gid); void smcd_conn_free(struct smc_connection *conn); From 0512f69e388c963dbe955d4bd9ae0f7d88d2dc54 Mon Sep 17 00:00:00 2001 From: Hans Wippel Date: Tue, 20 Nov 2018 16:46:41 +0100 Subject: [PATCH 691/726] net/smc: add SMC-D shutdown signal When a SMC-D link group is freed, a shutdown signal should be sent to the peer to indicate that the link group is invalid. This patch adds the shutdown signal to the SMC code. Signed-off-by: Hans Wippel Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_core.c | 10 ++++++++-- net/smc/smc_core.h | 3 ++- net/smc/smc_ism.c | 43 ++++++++++++++++++++++++++++++++----------- net/smc/smc_ism.h | 1 + 4 files changed, 43 insertions(+), 14 deletions(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index 3c023de58afd..1c9fa7f0261a 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -184,6 +184,8 @@ free: if (!lgr->is_smcd && lnk->state != SMC_LNK_INACTIVE) smc_llc_link_inactive(lnk); + if (lgr->is_smcd) + smc_ism_signal_shutdown(lgr); smc_lgr_free(lgr); } } @@ -485,7 +487,7 @@ void smc_port_terminate(struct smc_ib_device *smcibdev, u8 ibport) } /* Called when SMC-D device is terminated or peer is lost */ -void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid) +void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid, unsigned short vlan) { struct smc_link_group *lgr, *l; LIST_HEAD(lgr_free_list); @@ -495,7 +497,7 @@ void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid) list_for_each_entry_safe(lgr, l, &smc_lgr_list.list, list) { if (lgr->is_smcd && lgr->smcd == dev && (!peer_gid || lgr->peer_gid == peer_gid) && - !list_empty(&lgr->list)) { + (vlan == VLAN_VID_MASK || lgr->vlan_id == vlan)) { __smc_lgr_terminate(lgr); list_move(&lgr->list, &lgr_free_list); } @@ -506,6 +508,8 @@ void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid) list_for_each_entry_safe(lgr, l, &lgr_free_list, list) { list_del_init(&lgr->list); cancel_delayed_work_sync(&lgr->free_work); + if (!peer_gid && vlan == VLAN_VID_MASK) /* dev terminated? */ + smc_ism_signal_shutdown(lgr); smc_lgr_free(lgr); } } @@ -1026,6 +1030,8 @@ void smc_core_exit(void) smc_llc_link_inactive(lnk); } cancel_delayed_work_sync(&lgr->free_work); + if (lgr->is_smcd) + smc_ism_signal_shutdown(lgr); smc_lgr_free(lgr); /* free link group */ } } diff --git a/net/smc/smc_core.h b/net/smc/smc_core.h index 5bc6cbaf0ed5..cf98f4d6093e 100644 --- a/net/smc/smc_core.h +++ b/net/smc/smc_core.h @@ -247,7 +247,8 @@ void smc_lgr_free(struct smc_link_group *lgr); void smc_lgr_forget(struct smc_link_group *lgr); void smc_lgr_terminate(struct smc_link_group *lgr); void smc_port_terminate(struct smc_ib_device *smcibdev, u8 ibport); -void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid); +void smc_smcd_terminate(struct smcd_dev *dev, u64 peer_gid, + unsigned short vlan); int smc_buf_create(struct smc_sock *smc, bool is_smcd); int smc_uncompress_bufsize(u8 compressed); int smc_rmb_rtoken_handling(struct smc_connection *conn, diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c index e36f21ce7252..2fff79db1a59 100644 --- a/net/smc/smc_ism.c +++ b/net/smc/smc_ism.c @@ -187,22 +187,28 @@ struct smc_ism_event_work { #define ISM_EVENT_REQUEST 0x0001 #define ISM_EVENT_RESPONSE 0x0002 #define ISM_EVENT_REQUEST_IR 0x00000001 +#define ISM_EVENT_CODE_SHUTDOWN 0x80 #define ISM_EVENT_CODE_TESTLINK 0x83 +union smcd_sw_event_info { + u64 info; + struct { + u8 uid[SMC_LGR_ID_SIZE]; + unsigned short vlan_id; + u16 code; + }; +}; + static void smcd_handle_sw_event(struct smc_ism_event_work *wrk) { - union { - u64 info; - struct { - u32 uid; - unsigned short vlanid; - u16 code; - }; - } ev_info; + union smcd_sw_event_info ev_info; + ev_info.info = wrk->event.info; switch (wrk->event.code) { + case ISM_EVENT_CODE_SHUTDOWN: /* Peer shut down DMBs */ + smc_smcd_terminate(wrk->smcd, wrk->event.tok, ev_info.vlan_id); + break; case ISM_EVENT_CODE_TESTLINK: /* Activity timer */ - ev_info.info = wrk->event.info; if (ev_info.code == ISM_EVENT_REQUEST) { ev_info.code = ISM_EVENT_RESPONSE; wrk->smcd->ops->signal_event(wrk->smcd, @@ -215,6 +221,21 @@ static void smcd_handle_sw_event(struct smc_ism_event_work *wrk) } } +int smc_ism_signal_shutdown(struct smc_link_group *lgr) +{ + int rc; + union smcd_sw_event_info ev_info; + + memcpy(ev_info.uid, lgr->id, SMC_LGR_ID_SIZE); + ev_info.vlan_id = lgr->vlan_id; + ev_info.code = ISM_EVENT_REQUEST; + rc = lgr->smcd->ops->signal_event(lgr->smcd, lgr->peer_gid, + ISM_EVENT_REQUEST_IR, + ISM_EVENT_CODE_SHUTDOWN, + ev_info.info); + return rc; +} + /* worker for SMC-D events */ static void smc_ism_event_work(struct work_struct *work) { @@ -223,7 +244,7 @@ static void smc_ism_event_work(struct work_struct *work) switch (wrk->event.type) { case ISM_EVENT_GID: /* GID event, token is peer GID */ - smc_smcd_terminate(wrk->smcd, wrk->event.tok); + smc_smcd_terminate(wrk->smcd, wrk->event.tok, VLAN_VID_MASK); break; case ISM_EVENT_DMB: break; @@ -289,7 +310,7 @@ void smcd_unregister_dev(struct smcd_dev *smcd) spin_unlock(&smcd_dev_list.lock); flush_workqueue(smcd->event_wq); destroy_workqueue(smcd->event_wq); - smc_smcd_terminate(smcd, 0); + smc_smcd_terminate(smcd, 0, VLAN_VID_MASK); device_del(&smcd->dev); } diff --git a/net/smc/smc_ism.h b/net/smc/smc_ism.h index aee45b860b79..4da946cbfa29 100644 --- a/net/smc/smc_ism.h +++ b/net/smc/smc_ism.h @@ -45,4 +45,5 @@ int smc_ism_register_dmb(struct smc_link_group *lgr, int buf_size, int smc_ism_unregister_dmb(struct smcd_dev *dev, struct smc_buf_desc *dmb_desc); int smc_ism_write(struct smcd_dev *dev, const struct smc_ism_position *pos, void *data, size_t len); +int smc_ism_signal_shutdown(struct smc_link_group *lgr); #endif From b9a22dd9811dbcddb5623c499e5b736400059df6 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 20 Nov 2018 16:46:42 +0100 Subject: [PATCH 692/726] net/smc: atomic SMCD cursor handling Running uperf tests with SMCD on LPARs results in corrupted cursors. SMCD cursors should be treated atomically to fix cursor corruption. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_cdc.c | 26 +++++++++++--------- net/smc/smc_cdc.h | 60 +++++++++++++++++++++++++++++++++++------------ 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c index ed5dcf03fe0b..db83332ac1c8 100644 --- a/net/smc/smc_cdc.c +++ b/net/smc/smc_cdc.c @@ -81,7 +81,7 @@ static inline void smc_cdc_add_pending_send(struct smc_connection *conn, sizeof(struct smc_cdc_msg) > SMC_WR_BUF_SIZE, "must increase SMC_WR_BUF_SIZE to at least sizeof(struct smc_cdc_msg)"); BUILD_BUG_ON_MSG( - sizeof(struct smc_cdc_msg) != SMC_WR_TX_SIZE, + offsetofend(struct smc_cdc_msg, reserved) > SMC_WR_TX_SIZE, "must adapt SMC_WR_TX_SIZE to sizeof(struct smc_cdc_msg); if not all smc_wr upper layer protocols use the same message size any more, must start to set link->wr_tx_sges[i].length on each individual smc_wr_tx_send()"); BUILD_BUG_ON_MSG( sizeof(struct smc_cdc_tx_pend) > SMC_WR_TX_PEND_PRIV_SIZE, @@ -177,23 +177,24 @@ void smc_cdc_tx_dismiss_slots(struct smc_connection *conn) int smcd_cdc_msg_send(struct smc_connection *conn) { struct smc_sock *smc = container_of(conn, struct smc_sock, conn); + union smc_host_cursor curs; struct smcd_cdc_msg cdc; int rc, diff; memset(&cdc, 0, sizeof(cdc)); cdc.common.type = SMC_CDC_MSG_TYPE; - cdc.prod_wrap = conn->local_tx_ctrl.prod.wrap; - cdc.prod_count = conn->local_tx_ctrl.prod.count; - - cdc.cons_wrap = conn->local_tx_ctrl.cons.wrap; - cdc.cons_count = conn->local_tx_ctrl.cons.count; - cdc.prod_flags = conn->local_tx_ctrl.prod_flags; - cdc.conn_state_flags = conn->local_tx_ctrl.conn_state_flags; + curs.acurs.counter = atomic64_read(&conn->local_tx_ctrl.prod.acurs); + cdc.prod.wrap = curs.wrap; + cdc.prod.count = curs.count; + curs.acurs.counter = atomic64_read(&conn->local_tx_ctrl.cons.acurs); + cdc.cons.wrap = curs.wrap; + cdc.cons.count = curs.count; + cdc.cons.prod_flags = conn->local_tx_ctrl.prod_flags; + cdc.cons.conn_state_flags = conn->local_tx_ctrl.conn_state_flags; rc = smcd_tx_ism_write(conn, &cdc, sizeof(cdc), 0, 1); if (rc) return rc; - smc_curs_copy(&conn->rx_curs_confirmed, &conn->local_tx_ctrl.cons, - conn); + smc_curs_copy(&conn->rx_curs_confirmed, &curs, conn); /* Calculate transmitted data and increment free send buffer space */ diff = smc_curs_diff(conn->sndbuf_desc->len, &conn->tx_curs_fin, &conn->tx_curs_sent); @@ -331,13 +332,16 @@ static void smc_cdc_msg_recv(struct smc_sock *smc, struct smc_cdc_msg *cdc) static void smcd_cdc_rx_tsklet(unsigned long data) { struct smc_connection *conn = (struct smc_connection *)data; + struct smcd_cdc_msg *data_cdc; struct smcd_cdc_msg cdc; struct smc_sock *smc; if (!conn) return; - memcpy(&cdc, conn->rmb_desc->cpu_addr, sizeof(cdc)); + data_cdc = (struct smcd_cdc_msg *)conn->rmb_desc->cpu_addr; + smcd_curs_copy(&cdc.prod, &data_cdc->prod, conn); + smcd_curs_copy(&cdc.cons, &data_cdc->cons, conn); smc = container_of(conn, struct smc_sock, conn); smc_cdc_msg_recv(smc, (struct smc_cdc_msg *)&cdc); } diff --git a/net/smc/smc_cdc.h b/net/smc/smc_cdc.h index 934df4473a7c..b5bfe38c7f9b 100644 --- a/net/smc/smc_cdc.h +++ b/net/smc/smc_cdc.h @@ -48,21 +48,31 @@ struct smc_cdc_msg { struct smc_cdc_producer_flags prod_flags; struct smc_cdc_conn_state_flags conn_state_flags; u8 reserved[18]; -} __packed; /* format defined in RFC7609 */ +}; + +/* SMC-D cursor format */ +union smcd_cdc_cursor { + struct { + u16 wrap; + u32 count; + struct smc_cdc_producer_flags prod_flags; + struct smc_cdc_conn_state_flags conn_state_flags; + } __packed; +#ifdef KERNEL_HAS_ATOMIC64 + atomic64_t acurs; /* for atomic processing */ +#else + u64 acurs; /* for atomic processing */ +#endif +} __aligned(8); /* CDC message for SMC-D */ struct smcd_cdc_msg { struct smc_wr_rx_hdr common; /* Type = 0xFE */ u8 res1[7]; - u16 prod_wrap; - u32 prod_count; - u8 res2[2]; - u16 cons_wrap; - u32 cons_count; - struct smc_cdc_producer_flags prod_flags; - struct smc_cdc_conn_state_flags conn_state_flags; + union smcd_cdc_cursor prod; + union smcd_cdc_cursor cons; u8 res3[8]; -} __packed; +} __aligned(8); static inline bool smc_cdc_rxed_any_close(struct smc_connection *conn) { @@ -135,6 +145,21 @@ static inline void smc_curs_copy_net(union smc_cdc_cursor *tgt, #endif } +static inline void smcd_curs_copy(union smcd_cdc_cursor *tgt, + union smcd_cdc_cursor *src, + struct smc_connection *conn) +{ +#ifndef KERNEL_HAS_ATOMIC64 + unsigned long flags; + + spin_lock_irqsave(&conn->acurs_lock, flags); + tgt->acurs = src->acurs; + spin_unlock_irqrestore(&conn->acurs_lock, flags); +#else + atomic64_set(&tgt->acurs, atomic64_read(&src->acurs)); +#endif +} + /* calculate cursor difference between old and new, where old <= new */ static inline int smc_curs_diff(unsigned int size, union smc_host_cursor *old, @@ -222,12 +247,17 @@ static inline void smcr_cdc_msg_to_host(struct smc_host_cdc_msg *local, static inline void smcd_cdc_msg_to_host(struct smc_host_cdc_msg *local, struct smcd_cdc_msg *peer) { - local->prod.wrap = peer->prod_wrap; - local->prod.count = peer->prod_count; - local->cons.wrap = peer->cons_wrap; - local->cons.count = peer->cons_count; - local->prod_flags = peer->prod_flags; - local->conn_state_flags = peer->conn_state_flags; + union smc_host_cursor temp; + + temp.wrap = peer->prod.wrap; + temp.count = peer->prod.count; + atomic64_set(&local->prod.acurs, atomic64_read(&temp.acurs)); + + temp.wrap = peer->cons.wrap; + temp.count = peer->cons.count; + atomic64_set(&local->cons.acurs, atomic64_read(&temp.acurs)); + local->prod_flags = peer->cons.prod_flags; + local->conn_state_flags = peer->cons.conn_state_flags; } static inline void smc_cdc_msg_to_host(struct smc_host_cdc_msg *local, From e438bae43c1e08e688c09c410407b59fc1c173b4 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 20 Nov 2018 16:46:43 +0100 Subject: [PATCH 693/726] net/smc: use after free fix in smc_wr_tx_put_slot() In smc_wr_tx_put_slot() field pend->idx is used after being cleared. That means always idx 0 is cleared in the wr_tx_mask. This results in a broken administration of available WR send payload buffers. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_wr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_wr.c b/net/smc/smc_wr.c index 3c458d279855..c2694750a6a8 100644 --- a/net/smc/smc_wr.c +++ b/net/smc/smc_wr.c @@ -215,12 +215,14 @@ int smc_wr_tx_put_slot(struct smc_link *link, pend = container_of(wr_pend_priv, struct smc_wr_tx_pend, priv); if (pend->idx < link->wr_tx_cnt) { + u32 idx = pend->idx; + /* clear the full struct smc_wr_tx_pend including .priv */ memset(&link->wr_tx_pends[pend->idx], 0, sizeof(link->wr_tx_pends[pend->idx])); memset(&link->wr_tx_bufs[pend->idx], 0, sizeof(link->wr_tx_bufs[pend->idx])); - test_and_clear_bit(pend->idx, link->wr_tx_mask); + test_and_clear_bit(idx, link->wr_tx_mask); return 1; } From 1a37bd823891568f8721989aed0615835632d81a Mon Sep 17 00:00:00 2001 From: "Y.C. Chen" Date: Wed, 3 Oct 2018 14:57:47 +0800 Subject: [PATCH 694/726] drm/ast: change resolution may cause screen blurred The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by: Y.C. Chen Cc: Tested-by: Jean Delvare Reviewed-by: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/ast/ast_mode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 5e77d456d9bb..f06aae7701ed 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -568,6 +568,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc, } ast_bo_unreserve(bo); + ast_set_offset_reg(crtc); ast_set_start_address_crt1(crtc, (u32)gpu_addr); return 0; From 426a593e641ebf0d9288f0a2fcab644a86820220 Mon Sep 17 00:00:00 2001 From: Vincent Chen Date: Wed, 21 Nov 2018 09:38:11 +0800 Subject: [PATCH 695/726] net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by: Vincent Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/faraday/ftmac100.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c index 570caeb8ee9e..084f24daf2b5 100644 --- a/drivers/net/ethernet/faraday/ftmac100.c +++ b/drivers/net/ethernet/faraday/ftmac100.c @@ -872,11 +872,10 @@ static irqreturn_t ftmac100_interrupt(int irq, void *dev_id) struct net_device *netdev = dev_id; struct ftmac100 *priv = netdev_priv(netdev); - if (likely(netif_running(netdev))) { - /* Disable interrupts for polling */ - ftmac100_disable_all_int(priv); + /* Disable interrupts for polling */ + ftmac100_disable_all_int(priv); + if (likely(netif_running(netdev))) napi_schedule(&priv->napi); - } return IRQ_HANDLED; } From 7989b9ee8bafe5cc625381dd0c3c4586de27ca26 Mon Sep 17 00:00:00 2001 From: "Y.C. Chen" Date: Tue, 30 Oct 2018 11:34:46 +0800 Subject: [PATCH 696/726] drm/ast: fixed cursor may disappear sometimes Signed-off-by: Y.C. Chen Cc: Reviewed-by: Dave Airlie Signed-off-by: Dave Airlie --- drivers/gpu/drm/ast/ast_mode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index f06aae7701ed..7c6ac3cadb6b 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1255,7 +1255,7 @@ static int ast_cursor_move(struct drm_crtc *crtc, ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07)); /* dummy write to fire HWC */ - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00); + ast_show_cursor(crtc); return 0; } From e2b95b27196cc90f37016d79432fb2af3f9c9291 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:06 +0100 Subject: [PATCH 697/726] Revert "HID: input: simplify/fix high-res scroll event handling" This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-input.c | 43 +++++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 44ea8e7c71a9..28ee2ed88a1a 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1858,30 +1858,31 @@ EXPORT_SYMBOL_GPL(hidinput_disconnect); void hid_scroll_counter_handle_scroll(struct hid_scroll_counter *counter, int hi_res_value) { - int low_res_value, remainder, multiplier; + int low_res_scroll_amount; + /* Some wheels will rest 7/8ths of a notch from the previous notch + * after slow movement, so we want the threshold for low-res events to + * be in the middle of the notches (e.g. after 4/8ths) as opposed to on + * the notches themselves (8/8ths). + */ + int threshold = counter->resolution_multiplier / 2; input_report_rel(counter->dev, REL_WHEEL_HI_RES, hi_res_value * counter->microns_per_hi_res_unit); - /* - * Update the low-res remainder with the high-res value, - * but reset if the direction has changed. - */ - remainder = counter->remainder; - if ((remainder ^ hi_res_value) < 0) - remainder = 0; - remainder += hi_res_value; - - /* - * Then just use the resolution multiplier to see if - * we should send a low-res (aka regular wheel) event. - */ - multiplier = counter->resolution_multiplier; - low_res_value = remainder / multiplier; - remainder -= low_res_value * multiplier; - counter->remainder = remainder; - - if (low_res_value) - input_report_rel(counter->dev, REL_WHEEL, low_res_value); + counter->remainder += hi_res_value; + if (abs(counter->remainder) >= threshold) { + /* Add (or subtract) 1 because we want to trigger when the wheel + * is half-way to the next notch (i.e. scroll 1 notch after a + * 1/2 notch movement, 2 notches after a 1 1/2 notch movement, + * etc.). + */ + low_res_scroll_amount = + counter->remainder / counter->resolution_multiplier + + (hi_res_value > 0 ? 1 : -1); + input_report_rel(counter->dev, REL_WHEEL, + low_res_scroll_amount); + counter->remainder -= + low_res_scroll_amount * counter->resolution_multiplier; + } } EXPORT_SYMBOL_GPL(hid_scroll_counter_handle_scroll); From d0341efe7449860e1bbfdd282b3b7f0c34309222 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:07 +0100 Subject: [PATCH 698/726] Revert "HID: logitech: fix a used uninitialized GCC warning" This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index f01280898b24..5f0c080059c6 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -1231,6 +1231,7 @@ static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp, *multiplier = response.fap.params[0]; return 0; return_default: + *multiplier = 8; hid_warn(hidpp->hid_dev, "Couldn't get wheel multiplier (error %d), assuming %d.\n", ret, *multiplier); @@ -2695,7 +2696,7 @@ static int hi_res_scroll_look_up_microns(__u32 product_id) static int hi_res_scroll_enable(struct hidpp_device *hidpp) { int ret; - u8 multiplier = 8; + u8 multiplier; if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) { ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false); @@ -2703,9 +2704,10 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp) } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) { ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true, &multiplier); - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ + } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ { ret = hidpp10_enable_scrolling_acceleration(hidpp); - + multiplier = 8; + } if (ret) return ret; From a69616d5b3e13f18cdec1c759818aec87866ac0c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:08 +0100 Subject: [PATCH 699/726] Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 5f0c080059c6..fd6a8c325fa0 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -3314,11 +3314,13 @@ static void hidpp_remove(struct hid_device *hdev) static const struct hid_device_id hidpp_devices[] = { { /* wireless touchpad */ - LDJ_DEVICE(0x4011), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4011), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS }, { /* wireless touchpad T650 */ - LDJ_DEVICE(0x4101), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4101), .driver_data = HIDPP_QUIRK_CLASS_WTP | HIDPP_QUIRK_DELAYED_INIT }, { /* wireless touchpad T651 */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, @@ -3358,13 +3360,16 @@ static const struct hid_device_id hidpp_devices[] = { { /* Mouse Logitech Performance MX */ LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, { /* Keyboard logitech K400 */ - LDJ_DEVICE(0x4024), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4024), .driver_data = HIDPP_QUIRK_CLASS_K400 }, { /* Solar Keyboard Logitech K750 */ - LDJ_DEVICE(0x4002), + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x4002), .driver_data = HIDPP_QUIRK_CLASS_K750 }, - { LDJ_DEVICE(HID_ANY_ID) }, + { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, HID_ANY_ID)}, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL), .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS}, From 5372fc3797691065b8318f0cc9ab8695cebb17e1 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:09 +0100 Subject: [PATCH 700/726] Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 249 +------------------------------ 1 file changed, 4 insertions(+), 245 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index fd6a8c325fa0..7f8218f6ff56 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -64,14 +64,6 @@ MODULE_PARM_DESC(disable_tap_to_click, #define HIDPP_QUIRK_NO_HIDINPUT BIT(23) #define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS BIT(24) #define HIDPP_QUIRK_UNIFYING BIT(25) -#define HIDPP_QUIRK_HI_RES_SCROLL_1P0 BIT(26) -#define HIDPP_QUIRK_HI_RES_SCROLL_X2120 BIT(27) -#define HIDPP_QUIRK_HI_RES_SCROLL_X2121 BIT(28) - -/* Convenience constant to check for any high-res support. */ -#define HIDPP_QUIRK_HI_RES_SCROLL (HIDPP_QUIRK_HI_RES_SCROLL_1P0 | \ - HIDPP_QUIRK_HI_RES_SCROLL_X2120 | \ - HIDPP_QUIRK_HI_RES_SCROLL_X2121) #define HIDPP_QUIRK_DELAYED_INIT HIDPP_QUIRK_NO_HIDINPUT @@ -157,7 +149,6 @@ struct hidpp_device { unsigned long capabilities; struct hidpp_battery battery; - struct hid_scroll_counter vertical_wheel_counter; }; /* HID++ 1.0 error codes */ @@ -1166,101 +1157,6 @@ static int hidpp_battery_get_property(struct power_supply *psy, return ret; } -/* -------------------------------------------------------------------------- */ -/* 0x2120: Hi-resolution scrolling */ -/* -------------------------------------------------------------------------- */ - -#define HIDPP_PAGE_HI_RESOLUTION_SCROLLING 0x2120 - -#define CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE 0x10 - -static int hidpp_hrs_set_highres_scrolling_mode(struct hidpp_device *hidpp, - bool enabled, u8 *multiplier) -{ - u8 feature_index; - u8 feature_type; - int ret; - u8 params[1]; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, - HIDPP_PAGE_HI_RESOLUTION_SCROLLING, - &feature_index, - &feature_type); - if (ret) - return ret; - - params[0] = enabled ? BIT(0) : 0; - ret = hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HI_RESOLUTION_SCROLLING_SET_HIGHRES_SCROLLING_MODE, - params, sizeof(params), &response); - if (ret) - return ret; - *multiplier = response.fap.params[1]; - return 0; -} - -/* -------------------------------------------------------------------------- */ -/* 0x2121: HiRes Wheel */ -/* -------------------------------------------------------------------------- */ - -#define HIDPP_PAGE_HIRES_WHEEL 0x2121 - -#define CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY 0x00 -#define CMD_HIRES_WHEEL_SET_WHEEL_MODE 0x20 - -static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp, - u8 *multiplier) -{ - u8 feature_index; - u8 feature_type; - int ret; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, - &feature_index, &feature_type); - if (ret) - goto return_default; - - ret = hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HIRES_WHEEL_GET_WHEEL_CAPABILITY, - NULL, 0, &response); - if (ret) - goto return_default; - - *multiplier = response.fap.params[0]; - return 0; -return_default: - *multiplier = 8; - hid_warn(hidpp->hid_dev, - "Couldn't get wheel multiplier (error %d), assuming %d.\n", - ret, *multiplier); - return ret; -} - -static int hidpp_hrw_set_wheel_mode(struct hidpp_device *hidpp, bool invert, - bool high_resolution, bool use_hidpp) -{ - u8 feature_index; - u8 feature_type; - int ret; - u8 params[1]; - struct hidpp_report response; - - ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_HIRES_WHEEL, - &feature_index, &feature_type); - if (ret) - return ret; - - params[0] = (invert ? BIT(2) : 0) | - (high_resolution ? BIT(1) : 0) | - (use_hidpp ? BIT(0) : 0); - - return hidpp_send_fap_command_sync(hidpp, feature_index, - CMD_HIRES_WHEEL_SET_WHEEL_MODE, - params, sizeof(params), &response); -} - /* -------------------------------------------------------------------------- */ /* 0x4301: Solar Keyboard */ /* -------------------------------------------------------------------------- */ @@ -2524,8 +2420,7 @@ static int m560_raw_event(struct hid_device *hdev, u8 *data, int size) input_report_rel(mydata->input, REL_Y, v); v = hid_snto32(data[6], 8); - hid_scroll_counter_handle_scroll( - &hidpp->vertical_wheel_counter, v); + input_report_rel(mydata->input, REL_WHEEL, v); input_sync(mydata->input); } @@ -2653,73 +2548,6 @@ static int g920_get_config(struct hidpp_device *hidpp) return 0; } -/* -------------------------------------------------------------------------- */ -/* High-resolution scroll wheels */ -/* -------------------------------------------------------------------------- */ - -/** - * struct hi_res_scroll_info - Stores info on a device's high-res scroll wheel. - * @product_id: the HID product ID of the device being described. - * @microns_per_hi_res_unit: the distance moved by the user's finger for each - * high-resolution unit reported by the device, in - * 256ths of a millimetre. - */ -struct hi_res_scroll_info { - __u32 product_id; - int microns_per_hi_res_unit; -}; - -static struct hi_res_scroll_info hi_res_scroll_devices[] = { - { /* Anywhere MX */ - .product_id = 0x1017, .microns_per_hi_res_unit = 445 }, - { /* Performance MX */ - .product_id = 0x101a, .microns_per_hi_res_unit = 406 }, - { /* M560 */ - .product_id = 0x402d, .microns_per_hi_res_unit = 435 }, - { /* MX Master 2S */ - .product_id = 0x4069, .microns_per_hi_res_unit = 406 }, -}; - -static int hi_res_scroll_look_up_microns(__u32 product_id) -{ - int i; - int num_devices = sizeof(hi_res_scroll_devices) - / sizeof(hi_res_scroll_devices[0]); - for (i = 0; i < num_devices; i++) { - if (hi_res_scroll_devices[i].product_id == product_id) - return hi_res_scroll_devices[i].microns_per_hi_res_unit; - } - /* We don't have a value for this device, so use a sensible default. */ - return 406; -} - -static int hi_res_scroll_enable(struct hidpp_device *hidpp) -{ - int ret; - u8 multiplier; - - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) { - ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false); - hidpp_hrw_get_wheel_capability(hidpp, &multiplier); - } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) { - ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true, - &multiplier); - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ { - ret = hidpp10_enable_scrolling_acceleration(hidpp); - multiplier = 8; - } - if (ret) - return ret; - - hidpp->vertical_wheel_counter.resolution_multiplier = multiplier; - hidpp->vertical_wheel_counter.microns_per_hi_res_unit = - hi_res_scroll_look_up_microns(hidpp->hid_dev->product); - hid_info(hidpp->hid_dev, "multiplier = %d, microns = %d\n", - multiplier, - hidpp->vertical_wheel_counter.microns_per_hi_res_unit); - return 0; -} - /* -------------------------------------------------------------------------- */ /* Generic HID++ devices */ /* -------------------------------------------------------------------------- */ @@ -2765,11 +2593,6 @@ static void hidpp_populate_input(struct hidpp_device *hidpp, wtp_populate_input(hidpp, input, origin_is_hid_core); else if (hidpp->quirks & HIDPP_QUIRK_CLASS_M560) m560_populate_input(hidpp, input, origin_is_hid_core); - - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) { - input_set_capability(input, EV_REL, REL_WHEEL_HI_RES); - hidpp->vertical_wheel_counter.dev = input; - } } static int hidpp_input_configured(struct hid_device *hdev, @@ -2888,27 +2711,6 @@ static int hidpp_raw_event(struct hid_device *hdev, struct hid_report *report, return 0; } -static int hidpp_event(struct hid_device *hdev, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - /* This function will only be called for scroll events, due to the - * restriction imposed in hidpp_usages. - */ - struct hidpp_device *hidpp = hid_get_drvdata(hdev); - struct hid_scroll_counter *counter = &hidpp->vertical_wheel_counter; - /* A scroll event may occur before the multiplier has been retrieved or - * the input device set, or high-res scroll enabling may fail. In such - * cases we must return early (falling back to default behaviour) to - * avoid a crash in hid_scroll_counter_handle_scroll. - */ - if (!(hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) || value == 0 - || counter->dev == NULL || counter->resolution_multiplier == 0) - return 0; - - hid_scroll_counter_handle_scroll(counter, value); - return 1; -} - static int hidpp_initialize_battery(struct hidpp_device *hidpp) { static atomic_t battery_no = ATOMIC_INIT(0); @@ -3120,9 +2922,6 @@ static void hidpp_connect_event(struct hidpp_device *hidpp) if (hidpp->battery.ps) power_supply_changed(hidpp->battery.ps); - if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL) - hi_res_scroll_enable(hidpp); - if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT) || hidpp->delayed_input) /* if the input nodes are already created, we can stop now */ return; @@ -3308,10 +3107,6 @@ static void hidpp_remove(struct hid_device *hdev) mutex_destroy(&hidpp->send_mutex); } -#define LDJ_DEVICE(product) \ - HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, \ - USB_VENDOR_ID_LOGITECH, (product)) - static const struct hid_device_id hidpp_devices[] = { { /* wireless touchpad */ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, @@ -3326,39 +3121,10 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_T651), .driver_data = HIDPP_QUIRK_CLASS_WTP }, - { /* Mouse Logitech Anywhere MX */ - LDJ_DEVICE(0x1017), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, - { /* Mouse Logitech Cube */ - LDJ_DEVICE(0x4010), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, - { /* Mouse Logitech M335 */ - LDJ_DEVICE(0x4050), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech M515 */ - LDJ_DEVICE(0x4007), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, { /* Mouse logitech M560 */ - LDJ_DEVICE(0x402d), - .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 - | HIDPP_QUIRK_HI_RES_SCROLL_X2120 }, - { /* Mouse Logitech M705 (firmware RQM17) */ - LDJ_DEVICE(0x101b), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, - { /* Mouse Logitech M705 (firmware RQM67) */ - LDJ_DEVICE(0x406d), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech M720 */ - LDJ_DEVICE(0x405e), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Anywhere 2 */ - LDJ_DEVICE(0x404a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb013), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb018), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0xb01f), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Anywhere 2S */ - LDJ_DEVICE(0x406a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Master */ - LDJ_DEVICE(0x4041), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0x4060), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { LDJ_DEVICE(0x4071), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech MX Master 2S */ - LDJ_DEVICE(0x4069), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_X2121 }, - { /* Mouse Logitech Performance MX */ - LDJ_DEVICE(0x101a), .driver_data = HIDPP_QUIRK_HI_RES_SCROLL_1P0 }, + HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, + USB_VENDOR_ID_LOGITECH, 0x402d), + .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 }, { /* Keyboard logitech K400 */ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE, USB_VENDOR_ID_LOGITECH, 0x4024), @@ -3378,19 +3144,12 @@ static const struct hid_device_id hidpp_devices[] = { MODULE_DEVICE_TABLE(hid, hidpp_devices); -static const struct hid_usage_id hidpp_usages[] = { - { HID_GD_WHEEL, EV_REL, REL_WHEEL }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - static struct hid_driver hidpp_driver = { .name = "logitech-hidpp-device", .id_table = hidpp_devices, .probe = hidpp_probe, .remove = hidpp_remove, .raw_event = hidpp_raw_event, - .usage_table = hidpp_usages, - .event = hidpp_event, .input_configured = hidpp_input_configured, .input_mapping = hidpp_input_mapping, .input_mapped = hidpp_input_mapped, From 00acc9e2c4a55045d73f2615429742369996d801 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:10 +0100 Subject: [PATCH 701/726] Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 47 +++++++++----------------------- 1 file changed, 13 insertions(+), 34 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 7f8218f6ff56..19cc980eebce 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -400,53 +400,32 @@ static void hidpp_prefix_name(char **name, int name_length) #define HIDPP_SET_LONG_REGISTER 0x82 #define HIDPP_GET_LONG_REGISTER 0x83 -/** - * hidpp10_set_register_bit() - Sets a single bit in a HID++ 1.0 register. - * @hidpp_dev: the device to set the register on. - * @register_address: the address of the register to modify. - * @byte: the byte of the register to modify. Should be less than 3. - * Return: 0 if successful, otherwise a negative error code. - */ -static int hidpp10_set_register_bit(struct hidpp_device *hidpp_dev, - u8 register_address, u8 byte, u8 bit) +#define HIDPP_REG_GENERAL 0x00 + +static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) { struct hidpp_report response; int ret; u8 params[3] = { 0 }; ret = hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_GET_REGISTER, - register_address, - NULL, 0, &response); + REPORT_ID_HIDPP_SHORT, + HIDPP_GET_REGISTER, + HIDPP_REG_GENERAL, + NULL, 0, &response); if (ret) return ret; memcpy(params, response.rap.params, 3); - params[byte] |= BIT(bit); + /* Set the battery bit */ + params[0] |= BIT(4); return hidpp_send_rap_command_sync(hidpp_dev, - REPORT_ID_HIDPP_SHORT, - HIDPP_SET_REGISTER, - register_address, - params, 3, &response); -} - - -#define HIDPP_REG_GENERAL 0x00 - -static int hidpp10_enable_battery_reporting(struct hidpp_device *hidpp_dev) -{ - return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_GENERAL, 0, 4); -} - -#define HIDPP_REG_FEATURES 0x01 - -/* On HID++ 1.0 devices, high-res scroll was called "scrolling acceleration". */ -static int hidpp10_enable_scrolling_acceleration(struct hidpp_device *hidpp_dev) -{ - return hidpp10_set_register_bit(hidpp_dev, HIDPP_REG_FEATURES, 0, 6); + REPORT_ID_HIDPP_SHORT, + HIDPP_SET_REGISTER, + HIDPP_REG_GENERAL, + params, 3, &response); } #define HIDPP_REG_BATTERY_STATUS 0x07 From f1539a0c2545d7bd82e451bd1464f2a820f55de4 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:11 +0100 Subject: [PATCH 702/726] Revert "HID: input: Create a utility class for counting scroll events" This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- drivers/hid/hid-input.c | 45 ----------------------------------------- include/linux/hid.h | 28 ------------------------- 2 files changed, 73 deletions(-) diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 28ee2ed88a1a..d6fab5798487 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -1841,48 +1841,3 @@ void hidinput_disconnect(struct hid_device *hid) } EXPORT_SYMBOL_GPL(hidinput_disconnect); -/** - * hid_scroll_counter_handle_scroll() - Send high- and low-resolution scroll - * events given a high-resolution wheel - * movement. - * @counter: a hid_scroll_counter struct describing the wheel. - * @hi_res_value: the movement of the wheel, in the mouse's high-resolution - * units. - * - * Given a high-resolution movement, this function converts the movement into - * microns and emits high-resolution scroll events for the input device. It also - * uses the multiplier from &struct hid_scroll_counter to emit low-resolution - * scroll events when appropriate for backwards-compatibility with userspace - * input libraries. - */ -void hid_scroll_counter_handle_scroll(struct hid_scroll_counter *counter, - int hi_res_value) -{ - int low_res_scroll_amount; - /* Some wheels will rest 7/8ths of a notch from the previous notch - * after slow movement, so we want the threshold for low-res events to - * be in the middle of the notches (e.g. after 4/8ths) as opposed to on - * the notches themselves (8/8ths). - */ - int threshold = counter->resolution_multiplier / 2; - - input_report_rel(counter->dev, REL_WHEEL_HI_RES, - hi_res_value * counter->microns_per_hi_res_unit); - - counter->remainder += hi_res_value; - if (abs(counter->remainder) >= threshold) { - /* Add (or subtract) 1 because we want to trigger when the wheel - * is half-way to the next notch (i.e. scroll 1 notch after a - * 1/2 notch movement, 2 notches after a 1 1/2 notch movement, - * etc.). - */ - low_res_scroll_amount = - counter->remainder / counter->resolution_multiplier - + (hi_res_value > 0 ? 1 : -1); - input_report_rel(counter->dev, REL_WHEEL, - low_res_scroll_amount); - counter->remainder -= - low_res_scroll_amount * counter->resolution_multiplier; - } -} -EXPORT_SYMBOL_GPL(hid_scroll_counter_handle_scroll); diff --git a/include/linux/hid.h b/include/linux/hid.h index 387c70df6f29..a355d61940f2 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1139,34 +1139,6 @@ static inline u32 hid_report_len(struct hid_report *report) int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size, int interrupt); - -/** - * struct hid_scroll_counter - Utility class for processing high-resolution - * scroll events. - * @dev: the input device for which events should be reported. - * @microns_per_hi_res_unit: the amount moved by the user's finger for each - * high-resolution unit reported by the mouse, in - * microns. - * @resolution_multiplier: the wheel's resolution in high-resolution mode as a - * multiple of its lower resolution. For example, if - * moving the wheel by one "notch" would result in a - * value of 1 in low-resolution mode but 8 in - * high-resolution, the multiplier is 8. - * @remainder: counts the number of high-resolution units moved since the last - * low-resolution event (REL_WHEEL or REL_HWHEEL) was sent. Should - * only be used by class methods. - */ -struct hid_scroll_counter { - struct input_dev *dev; - int microns_per_hi_res_unit; - int resolution_multiplier; - - int remainder; -}; - -void hid_scroll_counter_handle_scroll(struct hid_scroll_counter *counter, - int hi_res_value); - /* HID quirks API */ unsigned long hid_lookup_quirk(const struct hid_device *hdev); int hid_quirks_init(char **quirks_param, __u16 bus, int count); From ffe0e7cf290f5c9d1392134b4ef8da2a3761a4cd Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 21 Nov 2018 16:27:12 +0100 Subject: [PATCH 703/726] Revert "Input: Add the `REL_WHEEL_HI_RES` event code" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85. Quoting Peter: There is a HID feature report called "Resolution Multiplier" Described in the "Enhanced Wheel Support in Windows" doc and the "USB HID Usage Tables" page 30. http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf This was new for Windows Vista, so we're only a decade behind here. I only accidentally found this a few days ago while debugging a stuck button on a Microsoft mouse. The docs above describe it like this: a wheel control by default sends value 1 per notch. If the resolution multiplier is active, the wheel is expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or just send events more often, i.e. for less physical motion (e.g. MS Comfort mouse). For the latter, you need the right HW of course. The Sculpt mouse has tactile wheel clicks, so nothing really changes. The Comfort mouse has continuous motion with no tactile clicks. Similar to the free-wheeling Logitech mice but without any inertia. Note that the doc also says that Vista and onwards *always* enable this feature where available. An example HID definition looks like this: Usage Page Generic Desktop (0x01) Usage Resolution Multiplier (0x48) Logical Minimum 0 Logical Maximum 1 Physical Minimum 1 Physical Maximum 16 Report Size 2 # in bits Report Count 1 Feature (Data, Var, Abs) So the actual bits have values 0 or 1 and that reflects real values 1 or 16. We've only seen single-bits so far, so there's low-res and hi-res, but nothing in between. The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel). Microsoft suggests that > Vendors should ship their devices with smooth scrolling disabled and allow > Windows to enable it. This ensures that the device works like a regular HID > device on legacy operating systems that do not support smooth scrolling. (see the wheel doc linked above) The mice that we tested so far do reset on unplug. Device Support looks to be all (?) Microsoft mice but nothing else Not supported: - Logitech G500s, G303 - Roccat Kone XTD - all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a workstation that I could find don't have it. - Etekcity something something - Razer Imperator Supported: - Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4 - Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12 - Microsoft Surface mouse - yes, physical: 1:4 So again, I think this is really just available on Microsoft mice, but probably all decent MS mice released over the last decade. Looking at the hardware itself: - no noticeable notches in the weel - low-res: 18 events per 360deg rotation (click angle 20 deg) - high-res: 72 events per 360deg → matches multiplier of 4 - I can feel the notches during wheel turns - low-res: 24 events per 360 deg rotation (click angle 15 deg) - horiz wheel is tilt-based, continuous output value 1 - high-res: 24 events per 360deg with value 12 → matches multiplier of 12 - horiz wheel output rate doubles/triples?, values is 3 - It's a touch strip, not a wheel so no notches - high-res: events have value 4 instead of 1 a bit strange given that it doesn't actually have notches. Ok, why is this an issue for the current API? First, because the logitech multiplier used in Harry's patches looks suspiciously like the Resolution Multiplier so I think we should assume it's the same thing. Nestor, can you shed some light on that? - `REL_WHEEL` is defined as the number of notches, emulated where needed. - `REL_WHEEL_HI_RES` is the movement of the user's finger in microns. - `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold for action to be taken and one such action" https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel If the multiplier is set to M, this means we need an accumulated value of M until we can claim there was a wheel click. So after enabling the multiplier and setting it to the maximum (like Windows): - M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is the `REL_WHEEL_HI_RES` value. - wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm / (360deg/15deg)) - For every M units accumulated, send one `REL_WHEEL` event The problem here is that we've now hardcoded 20mm/15 deg into the kernel and we have no way of getting the size of the wheel or the click angle into the kernel. In userspace we now have to undo the kernel's calculation. If our click angle is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and calculate the correct angle instead. This also means the 15 is a hardcoded option forever and cannot be changed. In hid-logitech-hidpp.c, the microns per unit is hardcoded per device. Harry, did you measure those by hand? We'd need to update the kernel for every device and there are 10 years worth of devices from MS alone. The multiplier default is 8 which is in the right ballpark, so I'm pretty sure this is the same as the Resolution Multiplier, just in HID++ lingo. And given that the 120 magic factor is what Windows uses in the end, I can't imagine Logitech rolling their own thing here. Nestor? And we're already fairly inaccurate with the microns anyway. The MX Anywhere 2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch) would be 334 micron. That's only 80% of the fallback value of 406 in the kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7 doesn't exist because it's not a factor of 120. Summary: Best option may be to simply do what Windows is doing, all the HW manufacturers have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in fractions of 120, with 120 being one notch and divide that by the multiplier for the actual events. So e.g. the Logitech multiplier 8 would send value 15 for each event in hi-res mode. This can be converted in userspace to whatever userspace needs (combined with a hwdb there that tells you wheel size/click angle/...). Conflicts: include/uapi/linux/input-event-codes.h -> I kept the new reserved event in the code, so I had to adapt the revert slightly Signed-off-by: Benjamin Tissoires Acked-by: Harry Cutts Acked-by: Dmitry Torokhov Acked-by: Jiri Kosina --- Documentation/input/event-codes.rst | 11 +---------- include/uapi/linux/input-event-codes.h | 10 ---------- 2 files changed, 1 insertion(+), 20 deletions(-) diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index cef220c176a4..a8c0873beb95 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -190,16 +190,7 @@ A few EV_REL codes have special meanings: * REL_WHEEL, REL_HWHEEL: - These codes are used for vertical and horizontal scroll wheels, - respectively. The value is the number of "notches" moved on the wheel, the - physical size of which varies by device. For high-resolution wheels (which - report multiple events for each notch of movement, or do not have notches) - this may be an approximation based on the high-resolution scroll events. - -* REL_WHEEL_HI_RES: - - - If a vertical scroll wheel supports high-resolution scrolling, this code - will be emitted in addition to REL_WHEEL. The value is the (approximate) - distance travelled by the user's finger, in microns. + respectively. EV_ABS ------ diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 6d180cc60a5d..3eb5a4c3d60a 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -716,7 +716,6 @@ * the situation described above. */ #define REL_RESERVED 0x0a -#define REL_WHEEL_HI_RES 0x0b #define REL_MAX 0x0f #define REL_CNT (REL_MAX+1) @@ -753,15 +752,6 @@ #define ABS_MISC 0x28 -/* - * 0x2e is reserved and should not be used in input drivers. - * It was used by HID as ABS_MISC+6 and userspace needs to detect if - * the next ABS_* event is correct or is just ABS_MISC + n. - * We define here ABS_RESERVED so userspace can rely on it and detect - * the situation described above. - */ -#define ABS_RESERVED 0x2e - #define ABS_MT_SLOT 0x2f /* MT slot being modified */ #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ From 829383e183728dec7ed9150b949cd6de64127809 Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Wed, 21 Nov 2018 17:53:47 +0800 Subject: [PATCH 704/726] iommu/vt-d: Use memunmap to free memremap memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index f3ccf025108b..41a4b8808802 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3075,7 +3075,7 @@ static int copy_context_table(struct intel_iommu *iommu, } if (old_ce) - iounmap(old_ce); + memunmap(old_ce); ret = 0; if (devfn < 0x80) From 99f2c55591fb5c1b536263970d98c2ebc2089906 Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Wed, 21 Nov 2018 11:24:22 -0500 Subject: [PATCH 705/726] NFSv4.2 copy do not allocate memory under the lock Bruce pointed out that we shouldn't allocate memory while holding a lock in the nfs4_callback_offload() and handle_async_copy() that deal with a racing CB_OFFLOAD and reply to COPY case. Signed-off-by: Olga Kornievskaia Signed-off-by: Trond Myklebust --- fs/nfs/callback_proc.c | 22 +++++++++++----------- fs/nfs/nfs42proc.c | 19 ++++++++++--------- 2 files changed, 21 insertions(+), 20 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index 7b861bbc0b43..315967354954 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -686,20 +686,24 @@ __be32 nfs4_callback_offload(void *data, void *dummy, { struct cb_offloadargs *args = data; struct nfs_server *server; - struct nfs4_copy_state *copy; + struct nfs4_copy_state *copy, *tmp_copy; bool found = false; + copy = kzalloc(sizeof(struct nfs4_copy_state), GFP_NOFS); + if (!copy) + return htonl(NFS4ERR_SERVERFAULT); + spin_lock(&cps->clp->cl_lock); rcu_read_lock(); list_for_each_entry_rcu(server, &cps->clp->cl_superblocks, client_link) { - list_for_each_entry(copy, &server->ss_copies, copies) { + list_for_each_entry(tmp_copy, &server->ss_copies, copies) { if (memcmp(args->coa_stateid.other, - copy->stateid.other, + tmp_copy->stateid.other, sizeof(args->coa_stateid.other))) continue; - nfs4_copy_cb_args(copy, args); - complete(©->completion); + nfs4_copy_cb_args(tmp_copy, args); + complete(&tmp_copy->completion); found = true; goto out; } @@ -707,15 +711,11 @@ __be32 nfs4_callback_offload(void *data, void *dummy, out: rcu_read_unlock(); if (!found) { - copy = kzalloc(sizeof(struct nfs4_copy_state), GFP_NOFS); - if (!copy) { - spin_unlock(&cps->clp->cl_lock); - return htonl(NFS4ERR_SERVERFAULT); - } memcpy(©->stateid, &args->coa_stateid, NFS4_STATEID_SIZE); nfs4_copy_cb_args(copy, args); list_add_tail(©->copies, &cps->clp->pending_cb_stateids); - } + } else + kfree(copy); spin_unlock(&cps->clp->cl_lock); return 0; diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c index ac5b784a1de0..fed06fd9998d 100644 --- a/fs/nfs/nfs42proc.c +++ b/fs/nfs/nfs42proc.c @@ -137,31 +137,32 @@ static int handle_async_copy(struct nfs42_copy_res *res, struct file *dst, nfs4_stateid *src_stateid) { - struct nfs4_copy_state *copy; + struct nfs4_copy_state *copy, *tmp_copy; int status = NFS4_OK; bool found_pending = false; struct nfs_open_context *ctx = nfs_file_open_context(dst); + copy = kzalloc(sizeof(struct nfs4_copy_state), GFP_NOFS); + if (!copy) + return -ENOMEM; + spin_lock(&server->nfs_client->cl_lock); - list_for_each_entry(copy, &server->nfs_client->pending_cb_stateids, + list_for_each_entry(tmp_copy, &server->nfs_client->pending_cb_stateids, copies) { - if (memcmp(&res->write_res.stateid, ©->stateid, + if (memcmp(&res->write_res.stateid, &tmp_copy->stateid, NFS4_STATEID_SIZE)) continue; found_pending = true; - list_del(©->copies); + list_del(&tmp_copy->copies); break; } if (found_pending) { spin_unlock(&server->nfs_client->cl_lock); + kfree(copy); + copy = tmp_copy; goto out; } - copy = kzalloc(sizeof(struct nfs4_copy_state), GFP_NOFS); - if (!copy) { - spin_unlock(&server->nfs_client->cl_lock); - return -ENOMEM; - } memcpy(©->stateid, &res->write_res.stateid, NFS4_STATEID_SIZE); init_completion(©->completion); copy->parent_state = ctx->state; From bb21ce0ad227b69ec0f83279297ee44232105d96 Mon Sep 17 00:00:00 2001 From: Tigran Mkrtchyan Date: Wed, 21 Nov 2018 12:25:41 +0100 Subject: [PATCH 706/726] flexfiles: use per-mirror specified stateid for IO rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by: Tigran Mkrtchyan Signed-off-by: Rick Macklem Signed-off-by: Trond Myklebust --- fs/nfs/flexfilelayout/flexfilelayout.c | 21 +++++++++------------ fs/nfs/flexfilelayout/flexfilelayout.h | 4 ++++ fs/nfs/flexfilelayout/flexfilelayoutdev.c | 19 +++++++++++++++++++ 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c index 86bcba40ca61..74b36ed883ca 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -1361,12 +1361,7 @@ static void ff_layout_read_prepare_v4(struct rpc_task *task, void *data) task)) return; - if (ff_layout_read_prepare_common(task, hdr)) - return; - - if (nfs4_set_rw_stateid(&hdr->args.stateid, hdr->args.context, - hdr->args.lock_context, FMODE_READ) == -EIO) - rpc_exit(task, -EIO); /* lost lock, terminate I/O */ + ff_layout_read_prepare_common(task, hdr); } static void ff_layout_read_call_done(struct rpc_task *task, void *data) @@ -1542,12 +1537,7 @@ static void ff_layout_write_prepare_v4(struct rpc_task *task, void *data) task)) return; - if (ff_layout_write_prepare_common(task, hdr)) - return; - - if (nfs4_set_rw_stateid(&hdr->args.stateid, hdr->args.context, - hdr->args.lock_context, FMODE_WRITE) == -EIO) - rpc_exit(task, -EIO); /* lost lock, terminate I/O */ + ff_layout_write_prepare_common(task, hdr); } static void ff_layout_write_call_done(struct rpc_task *task, void *data) @@ -1742,6 +1732,10 @@ ff_layout_read_pagelist(struct nfs_pgio_header *hdr) fh = nfs4_ff_layout_select_ds_fh(lseg, idx); if (fh) hdr->args.fh = fh; + + if (!nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid)) + goto out_failed; + /* * Note that if we ever decide to split across DSes, * then we may need to handle dense-like offsets. @@ -1804,6 +1798,9 @@ ff_layout_write_pagelist(struct nfs_pgio_header *hdr, int sync) if (fh) hdr->args.fh = fh; + if (!nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid)) + goto out_failed; + /* * Note that if we ever decide to split across DSes, * then we may need to handle dense-like offsets. diff --git a/fs/nfs/flexfilelayout/flexfilelayout.h b/fs/nfs/flexfilelayout/flexfilelayout.h index 411798346e48..de50a342d5a5 100644 --- a/fs/nfs/flexfilelayout/flexfilelayout.h +++ b/fs/nfs/flexfilelayout/flexfilelayout.h @@ -215,6 +215,10 @@ unsigned int ff_layout_fetch_ds_ioerr(struct pnfs_layout_hdr *lo, unsigned int maxnum); struct nfs_fh * nfs4_ff_layout_select_ds_fh(struct pnfs_layout_segment *lseg, u32 mirror_idx); +int +nfs4_ff_layout_select_ds_stateid(struct pnfs_layout_segment *lseg, + u32 mirror_idx, + nfs4_stateid *stateid); struct nfs4_pnfs_ds * nfs4_ff_layout_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx, diff --git a/fs/nfs/flexfilelayout/flexfilelayoutdev.c b/fs/nfs/flexfilelayout/flexfilelayoutdev.c index 74d8d5352438..d23347389626 100644 --- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c +++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c @@ -370,6 +370,25 @@ out: return fh; } +int +nfs4_ff_layout_select_ds_stateid(struct pnfs_layout_segment *lseg, + u32 mirror_idx, + nfs4_stateid *stateid) +{ + struct nfs4_ff_layout_mirror *mirror = FF_LAYOUT_COMP(lseg, mirror_idx); + + if (!ff_layout_mirror_valid(lseg, mirror, false)) { + pr_err_ratelimited("NFS: %s: No data server for mirror offset index %d\n", + __func__, mirror_idx); + goto out; + } + + nfs4_stateid_copy(stateid, &mirror->stateid); + return 1; +out: + return 0; +} + /** * nfs4_ff_layout_prepare_ds - prepare a DS connection for an RPC call * @lseg: the layout segment we're operating on From 0211dda68a4f6531923a2f72d8e8959207f59fba Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Wed, 21 Nov 2018 16:28:23 +0200 Subject: [PATCH 707/726] net/dim: Update DIM start sample after each DIM iteration On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- include/linux/net_dim.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/net_dim.h b/include/linux/net_dim.h index c79e859408e6..fd458389f7d1 100644 --- a/include/linux/net_dim.h +++ b/include/linux/net_dim.h @@ -406,6 +406,8 @@ static inline void net_dim(struct net_dim *dim, } /* fall through */ case NET_DIM_START_MEASURE: + net_dim_sample(end_sample.event_ctr, end_sample.pkt_ctr, end_sample.byte_ctr, + &dim->start_sample); dim->state = NET_DIM_MEASURE_IN_PROGRESS; break; case NET_DIM_APPLY_NEW_PROFILE: From 6d0f60b0f8588fd4380ea5df9601e12fddd55ce2 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 21 Nov 2018 16:32:10 +0100 Subject: [PATCH 708/726] net: thunderx: set xdp_prog to NULL if bpf_prog_add fails Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nicvf_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index 768f584f8392..88f8a8fa93cd 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -1784,6 +1784,7 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog) bool if_up = netif_running(nic->netdev); struct bpf_prog *old_prog; bool bpf_attached = false; + int ret = 0; /* For now just support only the usual MTU sized frames */ if (prog && (dev->mtu > 1500)) { @@ -1817,8 +1818,12 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog) if (nic->xdp_prog) { /* Attach BPF program */ nic->xdp_prog = bpf_prog_add(nic->xdp_prog, nic->rx_queues - 1); - if (!IS_ERR(nic->xdp_prog)) + if (!IS_ERR(nic->xdp_prog)) { bpf_attached = true; + } else { + ret = PTR_ERR(nic->xdp_prog); + nic->xdp_prog = NULL; + } } /* Calculate Tx queues needed for XDP and network stack */ @@ -1830,7 +1835,7 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog) netif_trans_update(nic->netdev); } - return 0; + return ret; } static int nicvf_xdp(struct net_device *netdev, struct netdev_bpf *xdp) From b7cdec3d699db2e5985ad39de0f25d3b6111928e Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 21 Nov 2018 11:17:58 -0600 Subject: [PATCH 709/726] ibmvnic: Fix RX queue buffer cleanup The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 27a6df30eafd..066897a350a5 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -485,8 +485,8 @@ static void release_rx_pools(struct ibmvnic_adapter *adapter) for (j = 0; j < rx_pool->size; j++) { if (rx_pool->rx_buff[j].skb) { - dev_kfree_skb_any(rx_pool->rx_buff[i].skb); - rx_pool->rx_buff[i].skb = NULL; + dev_kfree_skb_any(rx_pool->rx_buff[j].skb); + rx_pool->rx_buff[j].skb = NULL; } } From 5bf032ef08e6a110edc1e3bfb3c66a208fb55125 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Wed, 21 Nov 2018 11:17:59 -0600 Subject: [PATCH 710/726] ibmvnic: Update driver queues after change in ring size support During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 066897a350a5..c0203a0d5e3b 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1737,6 +1737,7 @@ static int do_reset(struct ibmvnic_adapter *adapter, struct ibmvnic_rwi *rwi, u32 reset_state) { u64 old_num_rx_queues, old_num_tx_queues; + u64 old_num_rx_slots, old_num_tx_slots; struct net_device *netdev = adapter->netdev; int i, rc; @@ -1748,6 +1749,8 @@ static int do_reset(struct ibmvnic_adapter *adapter, old_num_rx_queues = adapter->req_rx_queues; old_num_tx_queues = adapter->req_tx_queues; + old_num_rx_slots = adapter->req_rx_add_entries_per_subcrq; + old_num_tx_slots = adapter->req_tx_entries_per_subcrq; ibmvnic_cleanup(netdev); @@ -1810,7 +1813,11 @@ static int do_reset(struct ibmvnic_adapter *adapter, if (rc) return rc; } else if (adapter->req_rx_queues != old_num_rx_queues || - adapter->req_tx_queues != old_num_tx_queues) { + adapter->req_tx_queues != old_num_tx_queues || + adapter->req_rx_add_entries_per_subcrq != + old_num_rx_slots || + adapter->req_tx_entries_per_subcrq != + old_num_tx_slots) { release_rx_pools(adapter); release_tx_pools(adapter); release_napi(adapter); From b5d9a07ef7736b2456b9d3c90568de25e43d8ec3 Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Fri, 16 Nov 2018 21:21:30 +0300 Subject: [PATCH 711/726] arm64: sysreg: fix sparse warnings Specify correct type for the constants to avoid the following sparse complaints: ./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long ./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long Acked-by: Will Deacon Acked-by: Olof Johansson Acked-by: Luc Van Oostenryck Signed-off-by: Sergey Matyukevich Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/sysreg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 0c909c4a932f..842fb9572661 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -468,7 +468,7 @@ SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) -#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff +#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL #error "Inconsistent SCTLR_EL2 set/clear bits" #endif @@ -509,7 +509,7 @@ SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI | SCTLR_EL1_RES0) -#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff +#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffffUL #error "Inconsistent SCTLR_EL1 set/clear bits" #endif From 4f9f49646a5733c0c2bd49940673dde89a9c5add Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 21 Nov 2018 15:07:00 +0000 Subject: [PATCH 712/726] arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block When merging support for SSBD and the CRC32 instructions, the conflict resolution for the new capability entries in arm64_features[] inadvertedly predicated the availability of the CRC32 instructions on CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated. Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD capability. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/cpufeature.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index af50064dea51..aec5ecb85737 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1333,7 +1333,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .cpu_enable = cpu_enable_hw_dbm, }, #endif -#ifdef CONFIG_ARM64_SSBD { .desc = "CRC32 instructions", .capability = ARM64_HAS_CRC32, @@ -1343,6 +1342,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .field_pos = ID_AA64ISAR0_CRC32_SHIFT, .min_field_value = 1, }, +#ifdef CONFIG_ARM64_SSBD { .desc = "Speculative Store Bypassing Safe (SSBS)", .capability = ARM64_SSBS, From 5cd8d46ea1562be80063f53c7c6a5f40224de623 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 20 Nov 2018 13:00:18 -0500 Subject: [PATCH 713/726] packet: copy user buffers before orphan or clone tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 18 +++++++++++++++++- net/packet/af_packet.c | 4 ++-- 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0ba687454267..0d1b2c3f127b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1326,6 +1326,22 @@ static inline void skb_zcopy_set(struct sk_buff *skb, struct ubuf_info *uarg) } } +static inline void skb_zcopy_set_nouarg(struct sk_buff *skb, void *val) +{ + skb_shinfo(skb)->destructor_arg = (void *)((uintptr_t) val | 0x1UL); + skb_shinfo(skb)->tx_flags |= SKBTX_ZEROCOPY_FRAG; +} + +static inline bool skb_zcopy_is_nouarg(struct sk_buff *skb) +{ + return (uintptr_t) skb_shinfo(skb)->destructor_arg & 0x1UL; +} + +static inline void *skb_zcopy_get_nouarg(struct sk_buff *skb) +{ + return (void *)((uintptr_t) skb_shinfo(skb)->destructor_arg & ~0x1UL); +} + /* Release a reference on a zerocopy structure */ static inline void skb_zcopy_clear(struct sk_buff *skb, bool zerocopy) { @@ -1335,7 +1351,7 @@ static inline void skb_zcopy_clear(struct sk_buff *skb, bool zerocopy) if (uarg->callback == sock_zerocopy_callback) { uarg->zerocopy = uarg->zerocopy && zerocopy; sock_zerocopy_put(uarg); - } else { + } else if (!skb_zcopy_is_nouarg(skb)) { uarg->callback(uarg, zerocopy); } diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ec3095f13aae..a74650e98f42 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2394,7 +2394,7 @@ static void tpacket_destruct_skb(struct sk_buff *skb) void *ph; __u32 ts; - ph = skb_shinfo(skb)->destructor_arg; + ph = skb_zcopy_get_nouarg(skb); packet_dec_pending(&po->tx_ring); ts = __packet_set_timestamp(po, ph, skb); @@ -2461,7 +2461,7 @@ static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb, skb->mark = po->sk.sk_mark; skb->tstamp = sockc->transmit_time; sock_tx_timestamp(&po->sk, sockc->tsflags, &skb_shinfo(skb)->tx_flags); - skb_shinfo(skb)->destructor_arg = ph.raw; + skb_zcopy_set_nouarg(skb, ph.raw); skb_reserve(skb, hlen); skb_reset_network_header(skb); From 896585d48e8e9ba44cd1754fbce8537feffcc1a5 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Wed, 21 Nov 2018 21:52:33 +0800 Subject: [PATCH 714/726] net/ipv6: re-do dad when interface has IFF_NOARP flag change When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi Reviewed-by: Stefano Brivio Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 63a808d5af15..045597b9a7c0 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -179,7 +179,7 @@ static void addrconf_dad_start(struct inet6_ifaddr *ifp); static void addrconf_dad_work(struct work_struct *w); static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id, bool send_na); -static void addrconf_dad_run(struct inet6_dev *idev); +static void addrconf_dad_run(struct inet6_dev *idev, bool restart); static void addrconf_rs_timer(struct timer_list *t); static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa); static void ipv6_ifa_notify(int event, struct inet6_ifaddr *ifa); @@ -3439,6 +3439,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct netdev_notifier_change_info *change_info; struct netdev_notifier_changeupper_info *info; struct inet6_dev *idev = __in6_dev_get(dev); struct net *net = dev_net(dev); @@ -3513,7 +3514,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, break; } - if (idev) { + if (!IS_ERR_OR_NULL(idev)) { if (idev->if_flags & IF_READY) { /* device is already configured - * but resend MLD reports, we might @@ -3521,6 +3522,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, * multicast snooping switches */ ipv6_mc_up(idev); + change_info = ptr; + if (change_info->flags_changed & IFF_NOARP) + addrconf_dad_run(idev, true); rt6_sync_up(dev, RTNH_F_LINKDOWN); break; } @@ -3555,7 +3559,7 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event, if (!IS_ERR_OR_NULL(idev)) { if (run_pending) - addrconf_dad_run(idev); + addrconf_dad_run(idev, false); /* Device has an address by now */ rt6_sync_up(dev, RTNH_F_DEAD); @@ -4173,16 +4177,19 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id, addrconf_verify_rtnl(); } -static void addrconf_dad_run(struct inet6_dev *idev) +static void addrconf_dad_run(struct inet6_dev *idev, bool restart) { struct inet6_ifaddr *ifp; read_lock_bh(&idev->lock); list_for_each_entry(ifp, &idev->addr_list, if_list) { spin_lock(&ifp->lock); - if (ifp->flags & IFA_F_TENTATIVE && - ifp->state == INET6_IFADDR_STATE_DAD) + if ((ifp->flags & IFA_F_TENTATIVE && + ifp->state == INET6_IFADDR_STATE_DAD) || restart) { + if (restart) + ifp->state = INET6_IFADDR_STATE_PREDAD; addrconf_dad_kick(ifp); + } spin_unlock(&ifp->lock); } read_unlock_bh(&idev->lock); From 605108acfe6233b72e2f803aa1cb59a2af3001ca Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 21 Nov 2018 18:21:35 +0100 Subject: [PATCH 715/726] net: don't keep lonely packets forever in the gro hash Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by: Eric Dumazet Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni Acked-by: Willem de Bruijn Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 066aa902d85c..ddc551f24ba2 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5970,11 +5970,14 @@ bool napi_complete_done(struct napi_struct *n, int work_done) if (work_done) timeout = n->dev->gro_flush_timeout; + /* When the NAPI instance uses a timeout and keeps postponing + * it, we need to bound somehow the time packets are kept in + * the GRO layer + */ + napi_gro_flush(n, !!timeout); if (timeout) hrtimer_start(&n->timer, ns_to_ktime(timeout), HRTIMER_MODE_REL_PINNED); - else - napi_gro_flush(n, false); } if (unlikely(!list_empty(&n->poll_list))) { /* If n->poll_list is not empty, we need to mask irqs */ From 484afd1bd3fc6f9f5347289fc8b285aa65f67054 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Wed, 21 Nov 2018 18:23:53 +0100 Subject: [PATCH 716/726] net/sched: act_police: add missing spinlock initialization commit f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang Signed-off-by: Davide Caratti Acked-by: Cong Wang Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- net/sched/act_police.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/act_police.c b/net/sched/act_police.c index ee4665a5a022..37c9b8f0e10f 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -124,6 +124,7 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, return ret; } ret = ACT_P_CREATED; + spin_lock_init(&(to_police(*a)->tcfp_lock)); } else if (!ovr) { tcf_idr_release(*a, bind); return -EEXIST; From e59ff2c49ae16e1d179de679aca81405829aee6c Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 22 Nov 2018 14:36:30 +0800 Subject: [PATCH 717/726] virtio-net: disable guest csum during XDP set We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer Cc: Jesper Dangaard Brouer Cc: Pavel Popa Cc: David Ahern Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 3e2c041d76ac..9b5ace538824 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -70,7 +70,8 @@ static const unsigned long guest_offloads[] = { VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, VIRTIO_NET_F_GUEST_ECN, - VIRTIO_NET_F_GUEST_UFO + VIRTIO_NET_F_GUEST_UFO, + VIRTIO_NET_F_GUEST_CSUM }; struct virtnet_stat_desc { @@ -2334,9 +2335,6 @@ static int virtnet_clear_guest_offloads(struct virtnet_info *vi) if (!vi->guest_offloads) return 0; - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM)) - offloads = 1ULL << VIRTIO_NET_F_GUEST_CSUM; - return virtnet_set_guest_offloads(vi, offloads); } @@ -2346,8 +2344,6 @@ static int virtnet_restore_guest_offloads(struct virtnet_info *vi) if (!vi->guest_offloads) return 0; - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM)) - offloads |= 1ULL << VIRTIO_NET_F_GUEST_CSUM; return virtnet_set_guest_offloads(vi, offloads); } From 18ba58e1c234ea1a2d9835ac8c1735d965ce4640 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 22 Nov 2018 14:36:31 +0800 Subject: [PATCH 718/726] virtio-net: fail XDP set if guest csum is negotiated We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer Cc: Jesper Dangaard Brouer Cc: Pavel Popa Cc: David Ahern Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9b5ace538824..cecfd77c9f3c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2361,8 +2361,9 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog, && (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) || virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) || virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) || - virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO))) { - NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO, disable LRO first"); + virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO) || + virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))) { + NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO/CSUM, disable LRO/CSUM first"); return -EOPNOTSUPP; } From 5ed9dc99107144f83b6c1bb52a69b58875baf540 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 22 Nov 2018 16:15:28 +0800 Subject: [PATCH 719/726] team: no need to do team_notify_peers or team_mcast_rejoin when disabling port team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index db633ae9f784..364f514d56d8 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -985,8 +985,6 @@ static void team_port_disable(struct team *team, team->en_port_count--; team_queue_override_port_del(team, port); team_adjust_ops(team); - team_notify_peers(team); - team_mcast_rejoin(team); team_lower_state_changed(port); } From c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Thu, 22 Nov 2018 07:34:41 -0500 Subject: [PATCH 720/726] net: amd: add missing of_node_put() of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/sunlance.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c index b4fc0ed5bce8..9d4899826823 100644 --- a/drivers/net/ethernet/amd/sunlance.c +++ b/drivers/net/ethernet/amd/sunlance.c @@ -1419,7 +1419,7 @@ static int sparc_lance_probe_one(struct platform_device *op, prop = of_get_property(nd, "tpe-link-test?", NULL); if (!prop) - goto no_link_test; + goto node_put; if (strcmp(prop, "true")) { printk(KERN_NOTICE "SunLance: warning: overriding option " @@ -1428,6 +1428,8 @@ static int sparc_lance_probe_one(struct platform_device *op, "to ecd@skynet.be\n"); auxio_set_lte(AUXIO_LTE_ON); } +node_put: + of_node_put(nd); no_link_test: lp->auto_select = 1; lp->tpe = 0; From ef2a7cf1d8831535b8991459567b385661eb4a36 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 23 Nov 2018 18:28:01 +0100 Subject: [PATCH 721/726] net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index 187a249ff2d1..fcaf18fa3904 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -585,10 +585,12 @@ static void nicvf_free_snd_queue(struct nicvf *nic, struct snd_queue *sq) if (!sq->dmem.base) return; - if (sq->tso_hdrs) + if (sq->tso_hdrs) { dma_free_coherent(&nic->pdev->dev, sq->dmem.q_len * TSO_HEADER_SIZE, sq->tso_hdrs, sq->tso_hdrs_phys); + sq->tso_hdrs = NULL; + } /* Free pending skbs in the queue */ smp_rmb(); From e7b9fb4f545b1f7885e7c642643828f93d3d79c9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 23 Nov 2018 15:46:50 -0200 Subject: [PATCH 722/726] dt-bindings: dsa: Fix typo in "probed" The correct form is "can be probed", so fix the typo. Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/dsa.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 3ceeb8de1196..35694c0c376b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -7,7 +7,7 @@ limitations. Current Binding --------------- -Switches are true Linux devices and can be probes by any means. Once +Switches are true Linux devices and can be probed by any means. Once probed, they register to the DSA framework, passing a node pointer. This node is expected to fulfil the following binding, and may contain additional properties as required by the device it is From 3fa528b7682e73e906266bcd43728b8f923bf9b2 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 23 Nov 2018 19:01:51 +0100 Subject: [PATCH 723/726] net: phy: mscc: fix deadlock in vsc85xx_default_config The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mscc.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index a2e59f4f6f01..7cae17517744 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -810,17 +810,13 @@ static int vsc85xx_default_config(struct phy_device *phydev) phydev->mdix_ctrl = ETH_TP_MDI_AUTO; mutex_lock(&phydev->lock); - rc = phy_select_page(phydev, MSCC_PHY_PAGE_EXTENDED_2); - if (rc < 0) - goto out_unlock; - reg_val = phy_read(phydev, MSCC_PHY_RGMII_CNTL); - reg_val &= ~(RGMII_RX_CLK_DELAY_MASK); - reg_val |= (RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS); - phy_write(phydev, MSCC_PHY_RGMII_CNTL, reg_val); + reg_val = RGMII_RX_CLK_DELAY_1_1_NS << RGMII_RX_CLK_DELAY_POS; + + rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2, + MSCC_PHY_RGMII_CNTL, RGMII_RX_CLK_DELAY_MASK, + reg_val); -out_unlock: - rc = phy_restore_page(phydev, rc, rc > 0 ? 0 : rc); mutex_unlock(&phydev->lock); return rc; From 07093b76476903f820d83d56c3040e656fb4d9e3 Mon Sep 17 00:00:00 2001 From: Andreas Fiedler Date: Sat, 24 Nov 2018 00:16:34 +0100 Subject: [PATCH 724/726] net: gemini: Fix copy/paste error The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/ethernet/cortina/gemini.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index ceec467f590d..949103db8a8a 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -660,7 +660,7 @@ static void gmac_clean_txq(struct net_device *netdev, struct gmac_txq *txq, u64_stats_update_begin(&port->tx_stats_syncp); port->tx_frag_stats[nfrags]++; - u64_stats_update_end(&port->ir_stats_syncp); + u64_stats_update_end(&port->tx_stats_syncp); } } From 4e962ff6e34f44c400c548da0c1e2393053a691e Mon Sep 17 00:00:00 2001 From: Luc Van Oostenryck Date: Sun, 25 Nov 2018 17:34:05 +0100 Subject: [PATCH 725/726] MAINTAINERS: change Sparse's maintainer I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by: Luc Van Oostenryck Signed-off-by: Linus Torvalds --- CREDITS | 4 ++++ MAINTAINERS | 3 +-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/CREDITS b/CREDITS index 84cbec4c6211..c9273393fe14 100644 --- a/CREDITS +++ b/CREDITS @@ -2204,6 +2204,10 @@ S: Post Office Box 371 S: North Little Rock, Arkansas 72115 S: USA +N: Christopher Li +E: sparse@chrisli.org +D: Sparse maintainer 2009 - 2018 + N: Stephan Linz E: linz@mazet.de E: Stephan.Linz@gmx.de diff --git a/MAINTAINERS b/MAINTAINERS index 03c46f483143..380e43f585d3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13996,11 +13996,10 @@ F: drivers/tty/serial/sunzilog.h F: drivers/tty/vcc.c SPARSE CHECKER -M: "Christopher Li" +M: "Luc Van Oostenryck" L: linux-sparse@vger.kernel.org W: https://sparse.wiki.kernel.org/ T: git git://git.kernel.org/pub/scm/devel/sparse/sparse.git -T: git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git S: Maintained F: include/linux/compiler.h From 2e6e902d185027f8e3cb8b7305238f7e35d6a436 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 25 Nov 2018 14:19:31 -0800 Subject: [PATCH 726/726] Linux 4.20-rc4 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index ddbf627cad8f..0ce4e29ee342 100644 --- a/Makefile +++ b/Makefile @@ -2,8 +2,8 @@ VERSION = 4 PATCHLEVEL = 20 SUBLEVEL = 0 -EXTRAVERSION = -rc3 -NAME = "People's Front" +EXTRAVERSION = -rc4 +NAME = Shy Crocodile # *DOCUMENTATION* # To see a list of typical targets execute "make help"