renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code

arm: Xilinx Zynq dt changes for v3.11

Browse Source 
The branch contains:
 - DT uart handling cleanup
 - Support for zc706 and zed board
 - Removal of board compatible string
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlG+ysgACgkQykllyylKDCENewCgk3LUwpMxepV1JOaNBmUJ0A09
 jtMAnA395sve+FBxYjfM+nSAmbnl5RYl
 =KBrZ
 -----END PGP SIGNATURE-----

Merge tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx into next/dt

From Michal Simek:

arm: Xilinx Zynq dt changes for v3.11

The branch contains:
- DT uart handling cleanup
- Support for zc706 and zed board
- Removal of board compatible string

* tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx:
  arm: dt: zynq: Add support for the zed platform
  arm: dt: zynq: Add support for the zc706 platform
  arm: dt: zynq: Use 'status' property for UART nodes
  arm: zynq: Remove board specific compatibility string
  clk: zynq: Remove deprecated clock code
  arm: zynq: Migrate platform to clock controller
  clk: zynq: Add clock controller driver
  clk: zynq: Factor out PLL driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2013-06-20 01:43:19 +02:00
commit a44bde66be
16 changed files with 1052 additions and 498 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

127
Documentation/devicetree/bindings/clock/zynq-7000.txt
View File

@ -6,50 +6,99 @@ The purpose of this document is to document their usage.
See clock_bindings.txt for more information on the generic clock bindings.
See Chapter 25 of Zynq TRM for more information about Zynq clocks.
== PLLs ==
Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
== Clock Controller ==
The clock controller is a logical abstraction of Zynq's clock tree. It reads
required input clock frequencies from the devicetree and acts as clock provider
for all clock consumers of PS clocks.
Required properties:
- #clock-cells : shall be 0 (only one clock is output from this node)
- compatible : "xlnx,zynq-pll"
- reg : pair of u32 values, which are the address offsets within the SLCR
of the relevant PLL_CTRL register and PLL_CFG register respectively
- clocks : phandle for parent clock. should be the phandle for ps_clk
- #clock-cells : Must be 1
- compatible : "xlnx,ps7-clkc"
- ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
(usually 33 MHz oscillators are used for Zynq platforms)
- clock-output-names : List of strings used to name the clock outputs. Shall be
a list of the outputs given below.
Optional properties:
- clock-output-names : name of the output clock
- clocks : as described in the clock bindings
- clock-names : as described in the clock bindings
Clock inputs:
The following strings are optional parameters to the 'clock-names' property in
order to provide an optional (E)MIO clock source.
- swdt_ext_clk
- gem0_emio_clk
- gem1_emio_clk
- mio_clk_XX # with XX = 00..53
...
Clock outputs:
0: armpll
1: ddrpll
2: iopll
3: cpu_6or4x
4: cpu_3or2x
5: cpu_2x
6: cpu_1x
7: ddr2x
8: ddr3x
9: dci
10: lqspi
11: smc
12: pcap
13: gem0
14: gem1
15: fclk0
16: fclk1
17: fclk2
18: fclk3
19: can0
20: can1
21: sdio0
22: sdio1
23: uart0
24: uart1
25: spi0
26: spi1
27: dma
28: usb0_aper
29: usb1_aper
30: gem0_aper
31: gem1_aper
32: sdio0_aper
33: sdio1_aper
34: spi0_aper
35: spi1_aper
36: can0_aper
37: can1_aper
38: i2c0_aper
39: i2c1_aper
40: uart0_aper
41: uart1_aper
42: gpio_aper
43: lqspi_aper
44: smc_aper
45: swdt
46: dbg_trc
47: dbg_apb
Example:
armpll: armpll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x100 0x110>;
clock-output-names = "armpll";
};
== Peripheral clocks ==
Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
Required properties:
- #clock-cells : shall be 1
- compatible : "xlnx,zynq-periph-clock"
- reg : a single u32 value, describing the offset within the SLCR where
the CLK_CTRL register is found for this peripheral
- clocks : phandle for parent clocks. should hold phandles for
the IO_PLL, ARM_PLL, and DDR_PLL in order
- clock-output-names : names of the output clock(s). For peripherals that have
two output clocks (for example, the UART), two clocks
should be listed.
Example:
uart_clk: uart_clk {
clkc: clkc {
#clock-cells = <1>;
compatible = "xlnx,zynq-periph-clock";
clocks = <&iopll &armpll &ddrpll>;
reg = <0x154>;
clock-output-names = "uart0_ref_clk",
"uart1_ref_clk";
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
# optional props
clocks = <&clkc 16>, <&clk_foo>;
clock-names = "gem1_emio_clk", "can_mio_clk_23";
};

4
arch/arm/boot/dts/Makefile
View File

@ -216,7 +216,9 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8650-mid.dtb \
wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb
targets += dtbs
targets += $(dtb-y)

73
arch/arm/boot/dts/zynq-7000.dtsi
View File

@ -49,16 +49,20 @@
uart0: uart@e0000000 {
compatible = "xlnx,xuartps";
status = "disabled";
clocks = <&clkc 23>, <&clkc 40>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0000000 0x1000>;
interrupts = <0 27 4>;
clocks = <&uart_clk 0>;
};
uart1: uart@e0001000 {
compatible = "xlnx,xuartps";
status = "disabled";
clocks = <&clkc 24>, <&clkc 41>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0001000 0x1000>;
interrupts = <0 50 4>;
clocks = <&uart_clk 1>;
};
slcr: slcr@f8000000 {
@ -69,50 +73,21 @@
#address-cells = <1>;
#size-cells = <0>;
ps_clk: ps_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
/* clock-frequency set in board-specific file */
clock-output-names = "ps_clk";
};
armpll: armpll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x100 0x110>;
clock-output-names = "armpll";
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x104 0x114>;
clock-output-names = "ddrpll";
};
iopll: iopll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x108 0x118>;
clock-output-names = "iopll";
};
uart_clk: uart_clk {
clkc: clkc {
#clock-cells = <1>;
compatible = "xlnx,zynq-periph-clock";
clocks = <&iopll &armpll &ddrpll>;
reg = <0x154>;
clock-output-names = "uart0_ref_clk",
"uart1_ref_clk";
};
cpu_clk: cpu_clk {
#clock-cells = <1>;
compatible = "xlnx,zynq-cpu-clock";
clocks = <&iopll &armpll &ddrpll>;
reg = <0x120 0x1C4>;
clock-output-names = "cpu_6x4x",
"cpu_3x2x",
"cpu_2x",
"cpu_1x";
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
};
};
};
@ -121,9 +96,8 @@
interrupt-parent = <&intc>;
interrupts = < 0 10 4 0 11 4 0 12 4 >;
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8001000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
};
@ -131,9 +105,8 @@
interrupt-parent = <&intc>;
interrupts = < 0 37 4 0 38 4 0 39 4 >;
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8002000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
};
scutimer: scutimer@f8f00600 {
@ -141,7 +114,7 @@
interrupts = < 1 13 0x301 >;
compatible = "arm,cortex-a9-twd-timer";
reg = < 0xf8f00600 0x20 >;
clocks = <&cpu_clk 1>;
clocks = <&clkc 4>;
} ;
};
};

6
arch/arm/boot/dts/zynq-zc702.dts
View File

@ -24,11 +24,11 @@
};
chosen {
bootargs = "console=ttyPS1,115200 earlyprintk";
bootargs = "console=ttyPS0,115200 earlyprintk";
};
};
&ps_clk {
clock-frequency = <33333330>;
&uart1 {
status = "okay";
};

35
arch/arm/boot/dts/zynq-zc706.dts Normal file
View File

@ -0,0 +1,35 @@
/*
* Copyright (C) 2011 Xilinx
* Copyright (C) 2012 National Instruments Corp.
* Copyright (C) 2013 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq ZC706 Development Board";
compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
chosen {
bootargs = "console=ttyPS0,115200 earlyprintk";
};
};
&uart1 {
status = "okay";
};

35
arch/arm/boot/dts/zynq-zed.dts Normal file
View File

@ -0,0 +1,35 @@
/*
* Copyright (C) 2011 Xilinx
* Copyright (C) 2012 National Instruments Corp.
* Copyright (C) 2013 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq Zed Development Board";
compatible = "xlnx,zynq-7000";
memory {
device_type = "memory";
reg = <0 0x20000000>;
};
chosen {
bootargs = "console=ttyPS0,115200 earlyprintk";
};
};
&uart1 {
status = "okay";
};

1
arch/arm/mach-zynq/common.c
View File

@ -98,7 +98,6 @@ static void zynq_system_reset(char mode, const char *cmd)
}
static const char * const zynq_dt_match[] = {
"xlnx,zynq-zc702",
"xlnx,zynq-7000",
NULL
};

2
arch/arm/mach-zynq/slcr.c
View File

@ -117,7 +117,7 @@ int __init zynq_slcr_init(void)
pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
xilinx_zynq_clocks_init(zynq_slcr_base);
zynq_clock_init(zynq_slcr_base);
of_node_put(np);

2
drivers/clk/Makefile
View File

@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PLAT_SAMSUNG) += samsung/

378
drivers/clk/clk-zynq.c
View File

@ -1,378 +0,0 @@
/*
* Copyright (c) 2012 National Instruments
*
* Josh Cartwright <josh.cartwright@ni.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/clk-provider.h>
#include <linux/clk/zynq.h>
static void __iomem *slcr_base;
struct zynq_pll_clk {
struct clk_hw hw;
void __iomem *pll_ctrl;
void __iomem *pll_cfg;
};
#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw)
#define CTRL_PLL_FDIV(x) ((x) >> 12)
static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct zynq_pll_clk *pll = to_zynq_pll_clk(hw);
return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl));
}
static const struct clk_ops zynq_pll_clk_ops = {
.recalc_rate = zynq_pll_recalc_rate,
};
static void __init zynq_pll_clk_setup(struct device_node *np)
{
struct clk_init_data init;
struct zynq_pll_clk *pll;
const char *parent_name;
struct clk *clk;
u32 regs[2];
int ret;
ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs));
if (WARN_ON(ret))
return;
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (WARN_ON(!pll))
return;
pll->pll_ctrl = slcr_base + regs[0];
pll->pll_cfg = slcr_base + regs[1];
of_property_read_string(np, "clock-output-names", &init.name);
init.ops = &zynq_pll_clk_ops;
parent_name = of_clk_get_parent_name(np, 0);
init.parent_names = &parent_name;
init.num_parents = 1;
pll->hw.init = &init;
clk = clk_register(NULL, &pll->hw);
if (WARN_ON(IS_ERR(clk)))
return;
ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
if (WARN_ON(ret))
return;
}
CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup);
struct zynq_periph_clk {
struct clk_hw hw;
struct clk_onecell_data onecell_data;
struct clk *gates[2];
void __iomem *clk_ctrl;
spinlock_t clkact_lock;
};
#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw)
static const u8 periph_clk_parent_map[] = {
0, 0, 1, 2
};
#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])
#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl));
}
static u8 zynq_periph_get_parent(struct clk_hw *hw)
{
struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl));
}
static const struct clk_ops zynq_periph_clk_ops = {
.recalc_rate = zynq_periph_recalc_rate,
.get_parent = zynq_periph_get_parent,
};
static void __init zynq_periph_clk_setup(struct device_node *np)
{
struct zynq_periph_clk *periph;
const char *parent_names[3];
struct clk_init_data init;
int clk_num = 0, err;
const char *name;
struct clk *clk;
u32 reg;
int i;
err = of_property_read_u32(np, "reg", &reg);
if (WARN_ON(err))
return;
periph = kzalloc(sizeof(*periph), GFP_KERNEL);
if (WARN_ON(!periph))
return;
periph->clk_ctrl = slcr_base + reg;
spin_lock_init(&periph->clkact_lock);
init.name = np->name;
init.ops = &zynq_periph_clk_ops;
for (i = 0; i < ARRAY_SIZE(parent_names); i++)
parent_names[i] = of_clk_get_parent_name(np, i);
init.parent_names = parent_names;
init.num_parents = ARRAY_SIZE(parent_names);
periph->hw.init = &init;
clk = clk_register(NULL, &periph->hw);
if (WARN_ON(IS_ERR(clk)))
return;
err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
if (WARN_ON(err))
return;
err = of_property_read_string_index(np, "clock-output-names", 0,
&name);
if (WARN_ON(err))
return;
periph->gates[0] = clk_register_gate(NULL, name, np->name, 0,
periph->clk_ctrl, 0, 0,
&periph->clkact_lock);
if (WARN_ON(IS_ERR(periph->gates[0])))
return;
clk_num++;
/* some periph clks have 2 downstream gates */
err = of_property_read_string_index(np, "clock-output-names", 1,
&name);
if (err != -ENODATA) {
periph->gates[1] = clk_register_gate(NULL, name, np->name, 0,
periph->clk_ctrl, 1, 0,
&periph->clkact_lock);
if (WARN_ON(IS_ERR(periph->gates[1])))
return;
clk_num++;
}
periph->onecell_data.clks = periph->gates;
periph->onecell_data.clk_num = clk_num;
err = of_clk_add_provider(np, of_clk_src_onecell_get,
&periph->onecell_data);
if (WARN_ON(err))
return;
}
CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup);
/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
* derivative rates depend on CLK_621_TRUE
*/
struct zynq_cpu_clk {
struct clk_hw hw;
struct clk_onecell_data onecell_data;
struct clk *subclks[4];
void __iomem *clk_ctrl;
spinlock_t clkact_lock;
};
#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw)
static const u8 zynq_cpu_clk_parent_map[] = {
1, 1, 2, 0
};
#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw)
{
struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl));
}
static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl));
}
static const struct clk_ops zynq_cpu_clk_ops = {
.get_parent = zynq_cpu_clk_get_parent,
.recalc_rate = zynq_cpu_clk_recalc_rate,
};
struct zynq_cpu_subclk {
struct clk_hw hw;
void __iomem *clk_621;
enum {
CPU_SUBCLK_6X4X,
CPU_SUBCLK_3X2X,
CPU_SUBCLK_2X,
CPU_SUBCLK_1X,
} which;
};
#define CLK_621_TRUE(x) ((x) & 1)
#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw);
static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned long uninitialized_var(rate);
struct zynq_cpu_subclk *subclk;
bool is_621;
subclk = to_zynq_cpu_subclk(hw)
is_621 = CLK_621_TRUE(ioread32(subclk->clk_621));
switch (subclk->which) {
case CPU_SUBCLK_6X4X:
rate = parent_rate;
break;
case CPU_SUBCLK_3X2X:
rate = parent_rate / 2;
break;
case CPU_SUBCLK_2X:
rate = parent_rate / (is_621 ? 3 : 2);
break;
case CPU_SUBCLK_1X:
rate = parent_rate / (is_621 ? 6 : 4);
break;
};
return rate;
}
static const struct clk_ops zynq_cpu_subclk_ops = {
.recalc_rate = zynq_cpu_subclk_recalc_rate,
};
static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which,
void __iomem *clk_621)
{
struct zynq_cpu_subclk *subclk;
struct clk_init_data init;
struct clk *clk;
int err;
err = of_property_read_string_index(np, "clock-output-names",
which, &init.name);
if (WARN_ON(err))
goto err_read_output_name;
subclk = kzalloc(sizeof(*subclk), GFP_KERNEL);
if (!subclk)
goto err_subclk_alloc;
subclk->clk_621 = clk_621;
subclk->which = which;
init.ops = &zynq_cpu_subclk_ops;
init.parent_names = &np->name;
init.num_parents = 1;
subclk->hw.init = &init;
clk = clk_register(NULL, &subclk->hw);
if (WARN_ON(IS_ERR(clk)))
goto err_clk_register;
return clk;
err_clk_register:
kfree(subclk);
err_subclk_alloc:
err_read_output_name:
return ERR_PTR(-EINVAL);
}
static void __init zynq_cpu_clk_setup(struct device_node *np)
{
struct zynq_cpu_clk *cpuclk;
const char *parent_names[3];
struct clk_init_data init;
void __iomem *clk_621;
struct clk *clk;
u32 reg[2];
int err;
int i;
err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
if (WARN_ON(err))
return;
cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
if (WARN_ON(!cpuclk))
return;
cpuclk->clk_ctrl = slcr_base + reg[0];
clk_621 = slcr_base + reg[1];
spin_lock_init(&cpuclk->clkact_lock);
init.name = np->name;
init.ops = &zynq_cpu_clk_ops;
for (i = 0; i < ARRAY_SIZE(parent_names); i++)
parent_names[i] = of_clk_get_parent_name(np, i);
init.parent_names = parent_names;
init.num_parents = ARRAY_SIZE(parent_names);
cpuclk->hw.init = &init;
clk = clk_register(NULL, &cpuclk->hw);
if (WARN_ON(IS_ERR(clk)))
return;
err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
if (WARN_ON(err))
return;
for (i = 0; i < 4; i++) {
cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621);
if (WARN_ON(IS_ERR(cpuclk->subclks[i])))
return;
}
cpuclk->onecell_data.clks = cpuclk->subclks;
cpuclk->onecell_data.clk_num = i;
err = of_clk_add_provider(np, of_clk_src_onecell_get,
&cpuclk->onecell_data);
if (WARN_ON(err))
return;
}
CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup);
void __init xilinx_zynq_clocks_init(void __iomem *slcr)
{
slcr_base = slcr;
of_clk_init(NULL);
}

3
drivers/clk/zynq/Makefile Normal file
View File

@ -0,0 +1,3 @@
# Zynq clock specific Makefile
obj-$(CONFIG_ARCH_ZYNQ) += clkc.o pll.o

533
drivers/clk/zynq/clkc.c Normal file
View File

@ -0,0 +1,533 @@
/*
* Zynq clock controller
*
* Copyright (C) 2012 - 2013 Xilinx
*
* Sören Brinkmann <soren.brinkmann@xilinx.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk/zynq.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/io.h>
static void __iomem *zynq_slcr_base_priv;
#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100)
#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104)
#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108)
#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c)
#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120)
#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124)
#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128)
#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c)
#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140)
#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144)
#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148)
#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c)
#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150)
#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154)
#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158)
#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c)
#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160)
#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164)
#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168)
#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170)
#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4)
#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304)
#define NUM_MIO_PINS 54
enum zynq_clk {
armpll, ddrpll, iopll,
cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x,
ddr2x, ddr3x, dci,
lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1,
sdio0, sdio1, uart0, uart1, spi0, spi1, dma,
usb0_aper, usb1_aper, gem0_aper, gem1_aper,
sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper,
i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper,
smc_aper, swdt, dbg_trc, dbg_apb, clk_max};
static struct clk *ps_clk;
static struct clk *clks[clk_max];
static struct clk_onecell_data clk_data;
static DEFINE_SPINLOCK(armpll_lock);
static DEFINE_SPINLOCK(ddrpll_lock);
static DEFINE_SPINLOCK(iopll_lock);
static DEFINE_SPINLOCK(armclk_lock);
static DEFINE_SPINLOCK(ddrclk_lock);
static DEFINE_SPINLOCK(dciclk_lock);
static DEFINE_SPINLOCK(gem0clk_lock);
static DEFINE_SPINLOCK(gem1clk_lock);
static DEFINE_SPINLOCK(canclk_lock);
static DEFINE_SPINLOCK(canmioclk_lock);
static DEFINE_SPINLOCK(dbgclk_lock);
static DEFINE_SPINLOCK(aperclk_lock);
static const char dummy_nm[] __initconst = "dummy_name";
static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"};
static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"};
static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"};
static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm};
static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm};
static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate",
"can0_mio_mux"};
static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate",
"can1_mio_mux"};
static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div",
dummy_nm};
static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"};
static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"};
static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"};
static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"};
static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
const char *clk_name, void __iomem *fclk_ctrl_reg,
const char **parents)
{
struct clk *clk;
char *mux_name;
char *div0_name;
char *div1_name;
spinlock_t *fclk_lock;
spinlock_t *fclk_gate_lock;
void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8;
fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL);
if (!fclk_lock)
goto err;
fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL);
if (!fclk_gate_lock)
goto err;
spin_lock_init(fclk_lock);
spin_lock_init(fclk_gate_lock);
mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name);
div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name);
div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name);
clk = clk_register_mux(NULL, mux_name, parents, 4, 0,
fclk_ctrl_reg, 4, 2, 0, fclk_lock);
clk = clk_register_divider(NULL, div0_name, mux_name,
0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, fclk_lock);
clk = clk_register_divider(NULL, div1_name, div0_name,
CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
fclk_lock);
clks[fclk] = clk_register_gate(NULL, clk_name,
div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg,
0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock);
kfree(mux_name);
kfree(div0_name);
kfree(div1_name);
return;
err:
clks[fclk] = ERR_PTR(-ENOMEM);
}
static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0,
enum zynq_clk clk1, const char *clk_name0,
const char *clk_name1, void __iomem *clk_ctrl,
const char **parents, unsigned int two_gates)
{
struct clk *clk;
char *mux_name;
char *div_name;
spinlock_t *lock;
lock = kmalloc(sizeof(*lock), GFP_KERNEL);
if (!lock)
goto err;
spin_lock_init(lock);
mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0);
div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0);
clk = clk_register_mux(NULL, mux_name, parents, 4, 0,
clk_ctrl, 4, 2, 0, lock);
clk = clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock);
clks[clk0] = clk_register_gate(NULL, clk_name0, div_name,
CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock);
if (two_gates)
clks[clk1] = clk_register_gate(NULL, clk_name1, div_name,
CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock);
kfree(mux_name);
kfree(div_name);
return;
err:
clks[clk0] = ERR_PTR(-ENOMEM);
if (two_gates)
clks[clk1] = ERR_PTR(-ENOMEM);
}
static void __init zynq_clk_setup(struct device_node *np)
{
int i;
u32 tmp;
int ret;
struct clk *clk;
char *clk_name;
const char *clk_output_name[clk_max];
const char *cpu_parents[4];
const char *periph_parents[4];
const char *swdt_ext_clk_mux_parents[2];
const char *can_mio_mux_parents[NUM_MIO_PINS];
pr_info("Zynq clock init\n");
/* get clock output names from DT */
for (i = 0; i < clk_max; i++) {
if (of_property_read_string_index(np, "clock-output-names",
i, &clk_output_name[i])) {
pr_err("%s: clock output name not in DT\n", __func__);
BUG();
}
}
cpu_parents[0] = clk_output_name[armpll];
cpu_parents[1] = clk_output_name[armpll];
cpu_parents[2] = clk_output_name[ddrpll];
cpu_parents[3] = clk_output_name[iopll];
periph_parents[0] = clk_output_name[iopll];
periph_parents[1] = clk_output_name[iopll];
periph_parents[2] = clk_output_name[armpll];
periph_parents[3] = clk_output_name[ddrpll];
/* ps_clk */
ret = of_property_read_u32(np, "ps-clk-frequency", &tmp);
if (ret) {
pr_warn("ps_clk frequency not specified, using 33 MHz.\n");
tmp = 33333333;
}
ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, CLK_IS_ROOT,
tmp);
/* PLLs */
clk = clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL,
SLCR_PLL_STATUS, 0, &armpll_lock);
clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll],
armpll_parents, 2, 0, SLCR_ARMPLL_CTRL, 4, 1, 0,
&armpll_lock);
clk = clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL,
SLCR_PLL_STATUS, 1, &ddrpll_lock);
clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll],
ddrpll_parents, 2, 0, SLCR_DDRPLL_CTRL, 4, 1, 0,
&ddrpll_lock);
clk = clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL,
SLCR_PLL_STATUS, 2, &iopll_lock);
clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll],
iopll_parents, 2, 0, SLCR_IOPLL_CTRL, 4, 1, 0,
&iopll_lock);
/* CPU clocks */
tmp = readl(SLCR_621_TRUE) & 1;
clk = clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, 0,
SLCR_ARM_CLK_CTRL, 4, 2, 0, &armclk_lock);
clk = clk_register_divider(NULL, "cpu_div", "cpu_mux", 0,
SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &armclk_lock);
clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x],
"cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock);
clk = clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0,
1, 2);
clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x],
"cpu_3or2x_div", CLK_IGNORE_UNUSED,
SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock);
clk = clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1,
2 + tmp);
clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x],
"cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL,
26, 0, &armclk_lock);
clk = clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1,
4 + 2 * tmp);
clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x],
"cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27,
0, &armclk_lock);
/* Timers */
swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x];
for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) {
int idx = of_property_match_string(np, "clock-names",
swdt_ext_clk_input_names[i]);
if (idx >= 0)
swdt_ext_clk_mux_parents[i + 1] =
of_clk_get_parent_name(np, idx);
else
swdt_ext_clk_mux_parents[i + 1] = dummy_nm;
}
clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt],
swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT,
SLCR_SWDT_CLK_SEL, 0, 1, 0, &gem0clk_lock);
/* DDR clocks */
clk = clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0,
SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock);
clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x],
"ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock);
clk_prepare_enable(clks[ddr2x]);
clk = clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0,
SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock);
clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x],
"ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock);
clk_prepare_enable(clks[ddr3x]);
clk = clk_register_divider(NULL, "dci_div0", "ddrpll", 0,
SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock);
clk = clk_register_divider(NULL, "dci_div1", "dci_div0",
CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&dciclk_lock);
clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1",
CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0,
&dciclk_lock);
clk_prepare_enable(clks[dci]);
/* Peripheral clocks */
for (i = fclk0; i <= fclk3; i++)
zynq_clk_register_fclk(i, clk_output_name[i],
SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0),
periph_parents);
zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL,
SLCR_LQSPI_CLK_CTRL, periph_parents, 0);
zynq_clk_register_periph_clk(smc, 0, clk_output_name[smc], NULL,
SLCR_SMC_CLK_CTRL, periph_parents, 0);
zynq_clk_register_periph_clk(pcap, 0, clk_output_name[pcap], NULL,
SLCR_PCAP_CLK_CTRL, periph_parents, 0);
zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0],
clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL,
periph_parents, 1);
zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0],
clk_output_name[uart1], SLCR_UART_CLK_CTRL,
periph_parents, 1);
zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0],
clk_output_name[spi1], SLCR_SPI_CLK_CTRL,
periph_parents, 1);
for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) {
int idx = of_property_match_string(np, "clock-names",
gem0_emio_input_names[i]);
if (idx >= 0)
gem0_mux_parents[i + 1] = of_clk_get_parent_name(np,
idx);
}
clk = clk_register_mux(NULL, "gem0_mux", periph_parents, 4, 0,
SLCR_GEM0_CLK_CTRL, 4, 2, 0, &gem0clk_lock);
clk = clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0,
SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock);
clk = clk_register_divider(NULL, "gem0_div1", "gem0_div0",
CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem0clk_lock);
clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
"gem0_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) {
int idx = of_property_match_string(np, "clock-names",
gem1_emio_input_names[i]);
if (idx >= 0)
gem1_mux_parents[i + 1] = of_clk_get_parent_name(np,
idx);
}
clk = clk_register_mux(NULL, "gem1_mux", periph_parents, 4, 0,
SLCR_GEM1_CLK_CTRL, 4, 2, 0, &gem1clk_lock);
clk = clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0,
SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock);
clk = clk_register_divider(NULL, "gem1_div1", "gem1_div0",
CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&gem1clk_lock);
clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
"gem1_emio_mux", CLK_SET_RATE_PARENT,
SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
tmp = strlen("mio_clk_00x");
clk_name = kmalloc(tmp, GFP_KERNEL);
for (i = 0; i < NUM_MIO_PINS; i++) {
int idx;
snprintf(clk_name, tmp, "mio_clk_%2.2d", i);
idx = of_property_match_string(np, "clock-names", clk_name);
if (idx >= 0)
can_mio_mux_parents[i] = of_clk_get_parent_name(np,
idx);
else
can_mio_mux_parents[i] = dummy_nm;
}
kfree(clk_name);
clk = clk_register_mux(NULL, "can_mux", periph_parents, 4, 0,
SLCR_CAN_CLK_CTRL, 4, 2, 0, &canclk_lock);
clk = clk_register_divider(NULL, "can_div0", "can_mux", 0,
SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &canclk_lock);
clk = clk_register_divider(NULL, "can_div1", "can_div0",
CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6,
CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
&canclk_lock);
clk = clk_register_gate(NULL, "can0_gate", "can_div1",
CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0,
&canclk_lock);
clk = clk_register_gate(NULL, "can1_gate", "can_div1",
CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0,
&canclk_lock);
clk = clk_register_mux(NULL, "can0_mio_mux",
can_mio_mux_parents, 54, CLK_SET_RATE_PARENT,
SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, &canmioclk_lock);
clk = clk_register_mux(NULL, "can1_mio_mux",
can_mio_mux_parents, 54, CLK_SET_RATE_PARENT,
SLCR_CAN_MIOCLK_CTRL, 16, 6, 0, &canmioclk_lock);
clks[can0] = clk_register_mux(NULL, clk_output_name[can0],
can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT,
SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, &canmioclk_lock);
clks[can1] = clk_register_mux(NULL, clk_output_name[can1],
can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT,
SLCR_CAN_MIOCLK_CTRL, 22, 1, 0, &canmioclk_lock);
for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) {
int idx = of_property_match_string(np, "clock-names",
dbgtrc_emio_input_names[i]);
if (idx >= 0)
dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np,
idx);
}
clk = clk_register_mux(NULL, "dbg_mux", periph_parents, 4, 0,
SLCR_DBG_CLK_CTRL, 4, 2, 0, &dbgclk_lock);
clk = clk_register_divider(NULL, "dbg_div", "dbg_mux", 0,
SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock);
clk = clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, 0,
SLCR_DBG_CLK_CTRL, 6, 1, 0, &dbgclk_lock);
clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc],
"dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL,
0, 0, &dbgclk_lock);
clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb],
clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0,
&dbgclk_lock);
/* One gated clock for all APER clocks. */
clks[dma] = clk_register_gate(NULL, clk_output_name[dma],
clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0,
&aperclk_lock);
clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0,
&aperclk_lock);
clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0,
&aperclk_lock);
clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0,
&aperclk_lock);
clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0,
&aperclk_lock);
clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0,
&aperclk_lock);
clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0,
&aperclk_lock);
clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0,
&aperclk_lock);
clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0,
&aperclk_lock);
clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0,
&aperclk_lock);
clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0,
&aperclk_lock);
clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0,
&aperclk_lock);
clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0,
&aperclk_lock);
clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0,
&aperclk_lock);
clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0,
&aperclk_lock);
clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0,
&aperclk_lock);
clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0,
&aperclk_lock);
clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper],
clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0,
&aperclk_lock);
for (i = 0; i < ARRAY_SIZE(clks); i++) {
if (IS_ERR(clks[i])) {
pr_err("Zynq clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
BUG();
}
}
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup);
void __init zynq_clock_init(void __iomem *slcr_base)
{
zynq_slcr_base_priv = slcr_base;
of_clk_init(NULL);
}

235
drivers/clk/zynq/pll.c Normal file
View File

@ -0,0 +1,235 @@
/*
* Zynq PLL driver
*
* Copyright (C) 2013 Xilinx
*
* Sören Brinkmann <soren.brinkmann@xilinx.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <linux/clk/zynq.h>
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
/**
* struct zynq_pll
* @hw: Handle between common and hardware-specific interfaces
* @pll_ctrl: PLL control register
* @pll_status: PLL status register
* @lock: Register lock
* @lockbit: Indicates the associated PLL_LOCKED bit in the PLL status
* register.
*/
struct zynq_pll {
struct clk_hw hw;
void __iomem *pll_ctrl;
void __iomem *pll_status;
spinlock_t *lock;
u8 lockbit;
};
#define to_zynq_pll(_hw) container_of(_hw, struct zynq_pll, hw)
/* Register bitfield defines */
#define PLLCTRL_FBDIV_MASK 0x7f000
#define PLLCTRL_FBDIV_SHIFT 12
#define PLLCTRL_BPQUAL_MASK (1 << 3)
#define PLLCTRL_PWRDWN_MASK 2
#define PLLCTRL_PWRDWN_SHIFT 1
#define PLLCTRL_RESET_MASK 1
#define PLLCTRL_RESET_SHIFT 0
/**
* zynq_pll_round_rate() - Round a clock frequency
* @hw: Handle between common and hardware-specific interfaces
* @rate: Desired clock frequency
* @prate: Clock frequency of parent clock
* Returns frequency closest to @rate the hardware can generate.
*/
static long zynq_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
u32 fbdiv;
fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
if (fbdiv < 13)
fbdiv = 13;
else if (fbdiv > 66)
fbdiv = 66;
return *prate * fbdiv;
}
/**
* zynq_pll_recalc_rate() - Recalculate clock frequency
* @hw: Handle between common and hardware-specific interfaces
* @parent_rate: Clock frequency of parent clock
* Returns current clock frequency.
*/
static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct zynq_pll *clk = to_zynq_pll(hw);
u32 fbdiv;
/*
* makes probably sense to redundantly save fbdiv in the struct
* zynq_pll to save the IO access.
*/
fbdiv = (readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >>
PLLCTRL_FBDIV_SHIFT;
return parent_rate * fbdiv;
}
/**
* zynq_pll_is_enabled - Check if a clock is enabled
* @hw: Handle between common and hardware-specific interfaces
* Returns 1 if the clock is enabled, 0 otherwise.
*
* Not sure this is a good idea, but since disabled means bypassed for
* this clock implementation we say we are always enabled.
*/
static int zynq_pll_is_enabled(struct clk_hw *hw)
{
unsigned long flags = 0;
u32 reg;
struct zynq_pll *clk = to_zynq_pll(hw);
spin_lock_irqsave(clk->lock, flags);
reg = readl(clk->pll_ctrl);
spin_unlock_irqrestore(clk->lock, flags);
return !(reg & (PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK));
}
/**
* zynq_pll_enable - Enable clock
* @hw: Handle between common and hardware-specific interfaces
* Returns 0 on success
*/
static int zynq_pll_enable(struct clk_hw *hw)
{
unsigned long flags = 0;
u32 reg;
struct zynq_pll *clk = to_zynq_pll(hw);
if (zynq_pll_is_enabled(hw))
return 0;
pr_info("PLL: enable\n");
/* Power up PLL and wait for lock */
spin_lock_irqsave(clk->lock, flags);
reg = readl(clk->pll_ctrl);
reg &= ~(PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK);
writel(reg, clk->pll_ctrl);
while (!(readl(clk->pll_status) & (1 << clk->lockbit)))
;
spin_unlock_irqrestore(clk->lock, flags);
return 0;
}
/**
* zynq_pll_disable - Disable clock
* @hw: Handle between common and hardware-specific interfaces
* Returns 0 on success
*/
static void zynq_pll_disable(struct clk_hw *hw)
{
unsigned long flags = 0;
u32 reg;
struct zynq_pll *clk = to_zynq_pll(hw);
if (!zynq_pll_is_enabled(hw))
return;
pr_info("PLL: shutdown\n");
/* shut down PLL */
spin_lock_irqsave(clk->lock, flags);
reg = readl(clk->pll_ctrl);
reg |= PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK;
writel(reg, clk->pll_ctrl);
spin_unlock_irqrestore(clk->lock, flags);
}
static const struct clk_ops zynq_pll_ops = {
.enable = zynq_pll_enable,
.disable = zynq_pll_disable,
.is_enabled = zynq_pll_is_enabled,
.round_rate = zynq_pll_round_rate,
.recalc_rate = zynq_pll_recalc_rate
};
/**
* clk_register_zynq_pll() - Register PLL with the clock framework
* @np Pointer to the DT device node
*/
struct clk *clk_register_zynq_pll(const char *name, const char *parent,
void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,
spinlock_t *lock)
{
struct zynq_pll *pll;
struct clk *clk;
u32 reg;
const char *parent_arr[1] = {parent};
unsigned long flags = 0;
struct clk_init_data initd = {
.name = name,
.parent_names = parent_arr,
.ops = &zynq_pll_ops,
.num_parents = 1,
.flags = 0
};
pll = kmalloc(sizeof(*pll), GFP_KERNEL);
if (!pll) {
pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__);
return ERR_PTR(-ENOMEM);
}
/* Populate the struct */
pll->hw.init = &initd;
pll->pll_ctrl = pll_ctrl;
pll->pll_status = pll_status;
pll->lockbit = lock_index;
pll->lock = lock;
spin_lock_irqsave(pll->lock, flags);
reg = readl(pll->pll_ctrl);
reg &= ~PLLCTRL_BPQUAL_MASK;
writel(reg, pll->pll_ctrl);
spin_unlock_irqrestore(pll->lock, flags);
clk = clk_register(NULL, &pll->hw);
if (WARN_ON(IS_ERR(clk)))
goto free_pll;
return clk;
free_pll:
kfree(pll);
return clk;
}

23
drivers/clocksource/cadence_ttc_timer.c
View File

@ -51,6 +51,8 @@
#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */
/*
* Setup the timers to use pre-scaling, using a fixed value for now that will
* work across most input frequency, but it may need to be more dynamic
@ -396,8 +398,9 @@ static void __init ttc_timer_init(struct device_node *timer)
{
unsigned int irq;
void __iomem *timer_baseaddr;
struct clk *clk;
struct clk *clk_cs, *clk_ce;
static int initialized;
int clksel;
if (initialized)
return;
@ -421,14 +424,24 @@ static void __init ttc_timer_init(struct device_node *timer)
BUG();
}
clk = of_clk_get_by_name(timer, "cpu_1x");
if (IS_ERR(clk)) {
clksel = __raw_readl(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
clk_cs = of_clk_get(timer, clksel);
if (IS_ERR(clk_cs)) {
pr_err("ERROR: timer input clock not found\n");
BUG();
}
ttc_setup_clocksource(clk, timer_baseaddr);
ttc_setup_clockevent(clk, timer_baseaddr + 4, irq);
clksel = __raw_readl(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET);
clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
clk_ce = of_clk_get(timer, clksel);
if (IS_ERR(clk_ce)) {
pr_err("ERROR: timer input clock not found\n");
BUG();
}
ttc_setup_clocksource(clk_cs, timer_baseaddr);
ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);
pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
}

85
drivers/tty/serial/xilinx_uartps.c
View File

@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/console.h>
@ -138,6 +139,16 @@
#define XUARTPS_SR_TXFULL 0x00000010 /* TX FIFO full */
#define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */
/**
* struct xuartps - device data
* @refclk Reference clock
* @aperclk APB clock
*/
struct xuartps {
struct clk *refclk;
struct clk *aperclk;
};
/**
* xuartps_isr - Interrupt handler
* @irq: Irq number
@ -936,34 +947,55 @@ static int xuartps_probe(struct platform_device *pdev)
int rc;
struct uart_port *port;
struct resource *res, *res2;
struct clk *clk;
struct xuartps *xuartps_data;
clk = of_clk_get(pdev->dev.of_node, 0);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "no clock specified\n");
return PTR_ERR(clk);
xuartps_data = kzalloc(sizeof(*xuartps_data), GFP_KERNEL);
if (!xuartps_data)
return -ENOMEM;
xuartps_data->aperclk = clk_get(&pdev->dev, "aper_clk");
if (IS_ERR(xuartps_data->aperclk)) {
dev_err(&pdev->dev, "aper_clk clock not found.\n");
rc = PTR_ERR(xuartps_data->aperclk);
goto err_out_free;
}
xuartps_data->refclk = clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xuartps_data->refclk)) {
dev_err(&pdev->dev, "ref_clk clock not found.\n");
rc = PTR_ERR(xuartps_data->refclk);
goto err_out_clk_put_aper;
}
rc = clk_prepare_enable(clk);
rc = clk_prepare_enable(xuartps_data->aperclk);
if (rc) {
dev_err(&pdev->dev, "could not enable clock\n");
return -EBUSY;
dev_err(&pdev->dev, "Unable to enable APER clock.\n");
goto err_out_clk_put;
}
rc = clk_prepare_enable(xuartps_data->refclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable device clock.\n");
goto err_out_clk_dis_aper;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
if (!res) {
rc = -ENODEV;
goto err_out_clk_disable;
}
res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res2)
return -ENODEV;
if (!res2) {
rc = -ENODEV;
goto err_out_clk_disable;
}
/* Initialize the port structure */
port = xuartps_get_port();
if (!port) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
return -ENODEV;
rc = -ENODEV;
goto err_out_clk_disable;
} else {
/* Register the port.
* This function also registers this device with the tty layer
@ -972,18 +1004,31 @@ static int xuartps_probe(struct platform_device *pdev)
port->mapbase = res->start;
port->irq = res2->start;
port->dev = &pdev->dev;
port->uartclk = clk_get_rate(clk);
port->private_data = clk;
port->uartclk = clk_get_rate(xuartps_data->refclk);
port->private_data = xuartps_data;
dev_set_drvdata(&pdev->dev, port);
rc = uart_add_one_port(&xuartps_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
dev_set_drvdata(&pdev->dev, NULL);
return rc;
goto err_out_clk_disable;
}
return 0;
}
err_out_clk_disable:
clk_disable_unprepare(xuartps_data->refclk);
err_out_clk_dis_aper:
clk_disable_unprepare(xuartps_data->aperclk);
err_out_clk_put:
clk_put(xuartps_data->refclk);
err_out_clk_put_aper:
clk_put(xuartps_data->aperclk);
err_out_free:
kfree(xuartps_data);
return rc;
}
/**
@ -995,14 +1040,18 @@ static int xuartps_probe(struct platform_device *pdev)
static int xuartps_remove(struct platform_device *pdev)
{
struct uart_port *port = dev_get_drvdata(&pdev->dev);
struct clk *clk = port->private_data;
struct xuartps *xuartps_data = port->private_data;
int rc;
/* Remove the xuartps port from the serial core */
rc = uart_remove_one_port(&xuartps_uart_driver, port);
dev_set_drvdata(&pdev->dev, NULL);
port->mapbase = 0;
clk_disable_unprepare(clk);
clk_disable_unprepare(xuartps_data->refclk);
clk_disable_unprepare(xuartps_data->aperclk);
clk_put(xuartps_data->refclk);
clk_put(xuartps_data->aperclk);
kfree(xuartps_data);
return rc;
}

8
include/linux/clk/zynq.h
View File

@ -1,4 +1,5 @@
/*
* Copyright (C) 2013 Xilinx Inc.
* Copyright (C) 2012 National Instruments
*
* This program is free software; you can redistribute it and/or modify
@ -19,6 +20,11 @@
#ifndef __LINUX_CLK_ZYNQ_H_
#define __LINUX_CLK_ZYNQ_H_
void __init xilinx_zynq_clocks_init(void __iomem *slcr);
#include <linux/spinlock.h>
void zynq_clock_init(void __iomem *slcr);
struct clk *clk_register_zynq_pll(const char *name, const char *parent,
void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,
spinlock_t *lock);
#endif