renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
Code

staging: olpc_dcon: fix space and coding issues

Browse Source 
Fix the whitespace and coding style issues in olpc_dcon metioned by
checkpatch.

Signed-off-by: Stefan Brähler <Stefan.Braehler@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Stefan Brähler 2011-04-12 19:53:31 +02:00 committed by Greg Kroah-Hartman
parent c09c9ae0a8
commit a3712f4987
2 changed files with 11 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
View File

@ -152,7 +152,7 @@ static void dcon_wiggle_xo_1(void)
* According to the cs5536 spec, to set GPIO14 to SMB_CLK we must
* simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and
* GPIO15.
*/
*/
cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL);
cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE);

16
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
View File

@ -24,9 +24,8 @@
#include "olpc_dcon.h"
/* Hardware setup on the XO 1.5:
* DCONLOAD connects to
* VX855_GPIO1 (not SMBCK2)
* DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver
* DCONLOAD connects to VX855_GPIO1 (not SMBCK2)
* DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver
* DCONSTAT0 connects to VX855_GPI10 (not SSPISDI)
* DCONSTAT1 connects to VX855_GPI11 (not nSSPISS)
* DCONIRQ connects to VX855_GPIO12
@ -34,9 +33,9 @@
* DCONSMBCLK connects to VX855 graphics CRTSPCLK
*/
#define VX855_GENL_PURPOSE_OUTPUT 0x44c // PMIO_Rx4c-4f
#define VX855_GPI_STATUS_CHG 0x450 // PMIO_Rx50
#define VX855_GPI_SCI_SMI 0x452 // PMIO_Rx52
#define VX855_GENL_PURPOSE_OUTPUT 0x44c /* PMIO_Rx4c-4f */
#define VX855_GPI_STATUS_CHG 0x450 /* PMIO_Rx50 */
#define VX855_GPI_SCI_SMI 0x452 /* PMIO_Rx52 */
#define BIT_GPIO12 0x40
#define PREFIX "OLPC DCON:"
@ -64,7 +63,6 @@ static int dcon_init_xo_1_5(struct dcon_priv *dcon)
u_int8_t tmp;
struct pci_dev *pdev;
pdev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VX855, NULL);
if (!pdev) {
@ -149,7 +147,7 @@ static void dcon_wiggle_xo_1_5(void)
* state machine to reset to a (sane) initial state. Mitch Bradley
* did some testing and discovered that holding for 16 SMB_CLK cycles
* worked a lot more reliably, so that's what we do here.
*/
*/
set_i2c_line(1, 1);
for (x = 0; x < 16; x++) {
@ -176,7 +174,7 @@ static u8 dcon_read_status_xo_1_5(void)
if (!dcon_was_irq())
return -1;
// i believe this is the same as "inb(0x44b) & 3"
/* i believe this is the same as "inb(0x44b) & 3" */
status = gpio_get_value(VX855_GPI(10));
status |= gpio_get_value(VX855_GPI(11)) << 1;