mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 17:23:55 +08:00
Blackfin: rename some Blackfin drivers
Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
parent
a17c7f6f5b
commit
a261eec000
@ -166,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -253,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -518,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = {
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = {
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
.type = "pcf8574_lcd",
|
||||
|
@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = {
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -600,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -854,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = {
|
||||
#endif
|
||||
|
||||
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.ctl_reg = 0x1000,
|
||||
@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
|
||||
|
@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
#endif
|
||||
|
||||
/* SPI ADC chip */
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
.bits_per_word = 16,
|
||||
@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
.irq = 39,
|
||||
},
|
||||
#endif
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -695,8 +695,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
.mode = SPI_MODE_3,
|
||||
},
|
||||
#endif
|
||||
#if defined(CONFIG_SPI_ADC_BF533) \
|
||||
|| defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) \
|
||||
|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
@ -1280,7 +1280,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
|
||||
.irq = IRQ_PF5,
|
||||
},
|
||||
#endif
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
@ -786,7 +786,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
|
||||
|
||||
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
|
||||
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
|
||||
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
|
||||
},
|
||||
|
@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
|
Loading…
Reference in New Issue
Block a user