mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-19 02:34:01 +08:00
powerpc: Add WSP platform
Add a platform for the Wire Speed Processor, based on the PPC A2. This includes code for the ICS & OPB interrupt controllers, as well as a SCOM backend, and SCOM based cpu bringup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jack Miller <jack@codezen.org> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This commit is contained in:
David Gibson
Benjamin Herrenschmidt
parent
82578e192b
commit
a1d0d98daf
14
arch/powerpc/include/asm/wsp.h
Normal file
14
arch/powerpc/include/asm/wsp.h
Normal file
@ -0,0 +1,14 @@
|
||||
/*
|
||||
* Copyright 2011 Michael Ellerman, IBM Corp.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
#ifndef __ASM_POWERPC_WSP_H
|
||||
#define __ASM_POWERPC_WSP_H
|
||||
|
||||
extern int wsp_get_chip_id(struct device_node *dn);
|
||||
|
||||
#endif /* __ASM_POWERPC_WSP_H */
|
||||
@ -864,6 +864,20 @@ have_hes:
|
||||
* that will have to be made dependent on whether we are running under
|
||||
* a hypervisor I suppose.
|
||||
*/
|
||||
|
||||
/* BEWARE, MAGIC
|
||||
* This code is called as an ordinary function on the boot CPU. But to
|
||||
* avoid duplication, this code is also used in SCOM bringup of
|
||||
* secondary CPUs. We read the code between the initial_tlb_code_start
|
||||
* and initial_tlb_code_end labels one instruction at a time and RAM it
|
||||
* into the new core via SCOM. That doesn't process branches, so there
|
||||
* must be none between those two labels. It also means if this code
|
||||
* ever takes any parameters, the SCOM code must also be updated to
|
||||
* provide them.
|
||||
*/
|
||||
.globl a2_tlbinit_code_start
|
||||
a2_tlbinit_code_start:
|
||||
|
||||
ori r11,r3,MAS0_WQ_ALLWAYS
|
||||
oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
|
||||
mtspr SPRN_MAS0,r11
|
||||
@ -880,6 +894,9 @@ have_hes:
|
||||
/* Write the TLB entry */
|
||||
tlbwe
|
||||
|
||||
.globl a2_tlbinit_after_linear_map
|
||||
a2_tlbinit_after_linear_map:
|
||||
|
||||
/* Now we branch the new virtual address mapped by this entry */
|
||||
LOAD_REG_IMMEDIATE(r3,1f)
|
||||
mtctr r3
|
||||
@ -931,10 +948,16 @@ have_hes:
|
||||
cmpw r3,r9
|
||||
blt 2b
|
||||
|
||||
.globl a2_tlbinit_after_iprot_flush
|
||||
a2_tlbinit_after_iprot_flush:
|
||||
|
||||
PPC_TLBILX(0,0,0)
|
||||
sync
|
||||
isync
|
||||
|
||||
.globl a2_tlbinit_code_end
|
||||
a2_tlbinit_code_end:
|
||||
|
||||
/* We translate LR and return */
|
||||
mflr r3
|
||||
tovirt(r3,r3)
|
||||
|
||||
@ -20,6 +20,7 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
|
||||
source "arch/powerpc/platforms/44x/Kconfig"
|
||||
source "arch/powerpc/platforms/40x/Kconfig"
|
||||
source "arch/powerpc/platforms/amigaone/Kconfig"
|
||||
source "arch/powerpc/platforms/wsp/Kconfig"
|
||||
|
||||
config KVM_GUEST
|
||||
bool "KVM Guest support"
|
||||
|
||||
@ -22,3 +22,4 @@ obj-$(CONFIG_PPC_CELL) += cell/
|
||||
obj-$(CONFIG_PPC_PS3) += ps3/
|
||||
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
|
||||
obj-$(CONFIG_AMIGAONE) += amigaone/
|
||||
obj-$(CONFIG_PPC_WSP) += wsp/
|
||||
|
||||
28
arch/powerpc/platforms/wsp/Kconfig
Normal file
28
arch/powerpc/platforms/wsp/Kconfig
Normal file
@ -0,0 +1,28 @@
|
||||
config PPC_WSP
|
||||
bool
|
||||
default n
|
||||
|
||||
menu "WSP platform selection"
|
||||
depends on PPC_BOOK3E_64
|
||||
|
||||
config PPC_PSR2
|
||||
bool "PSR-2 platform"
|
||||
select PPC_A2
|
||||
select GENERIC_TBSYNC
|
||||
select PPC_SCOM
|
||||
select EPAPR_BOOT
|
||||
select PPC_WSP
|
||||
select PPC_XICS
|
||||
select PPC_ICP_NATIVE
|
||||
default y
|
||||
|
||||
endmenu
|
||||
|
||||
config PPC_A2_DD2
|
||||
bool "Support for DD2 based A2/WSP systems"
|
||||
depends on PPC_A2
|
||||
|
||||
config WORKAROUND_ERRATUM_463
|
||||
depends on PPC_A2_DD2
|
||||
bool "Workaround erratum 463"
|
||||
default y
|
||||
6
arch/powerpc/platforms/wsp/Makefile
Normal file
6
arch/powerpc/platforms/wsp/Makefile
Normal file
@ -0,0 +1,6 @@
|
||||
ccflags-y += -mno-minimal-toc
|
||||
|
||||
obj-y += setup.o ics.o
|
||||
obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
|
||||
obj-$(CONFIG_PPC_WSP) += scom_wsp.o
|
||||
obj-$(CONFIG_SMP) += smp.o scom_smp.o
|
||||
712
arch/powerpc/platforms/wsp/ics.c
Normal file
712
arch/powerpc/platforms/wsp/ics.c
Normal file
@ -0,0 +1,712 @@
|
||||
/*
|
||||
* Copyright 2008-2011 IBM Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/cpu.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/msi.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/xics.h>
|
||||
|
||||
#include "wsp.h"
|
||||
#include "ics.h"
|
||||
|
||||
|
||||
/* WSP ICS */
|
||||
|
||||
struct wsp_ics {
|
||||
struct ics ics;
|
||||
struct device_node *dn;
|
||||
void __iomem *regs;
|
||||
spinlock_t lock;
|
||||
unsigned long *bitmap;
|
||||
u32 chip_id;
|
||||
u32 lsi_base;
|
||||
u32 lsi_count;
|
||||
u64 hwirq_start;
|
||||
u64 count;
|
||||
#ifdef CONFIG_SMP
|
||||
int *hwirq_cpu_map;
|
||||
#endif
|
||||
};
|
||||
|
||||
#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics)
|
||||
|
||||
#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00)
|
||||
#define IODA_TBL_ADDR_REG(base) ((base) + 0x18)
|
||||
#define IODA_TBL_DATA_REG(base) ((base) + 0x20)
|
||||
#define XIVE_UPDATE_REG(base) ((base) + 0x28)
|
||||
#define ICS_INT_CAPS_REG(base) ((base) + 0x30)
|
||||
|
||||
#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15))
|
||||
#define TBL_SELECT_XIST (1UL << 48)
|
||||
#define TBL_SELECT_XIVT (1UL << 49)
|
||||
|
||||
#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */
|
||||
|
||||
#define XIST_REQUIRED 0x8
|
||||
#define XIST_REJECTED 0x4
|
||||
#define XIST_PRESENTED 0x2
|
||||
#define XIST_PENDING 0x1
|
||||
|
||||
#define XIVE_SERVER_SHIFT 42
|
||||
#define XIVE_SERVER_MASK 0xFFFFULL
|
||||
#define XIVE_PRIORITY_MASK 0xFFULL
|
||||
#define XIVE_PRIORITY_SHIFT 32
|
||||
#define XIVE_WRITE_ENABLE (1ULL << 63)
|
||||
|
||||
/*
|
||||
* The docs refer to a 6 bit field called ChipID, which consists of a
|
||||
* 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
|
||||
* so we ignore it, and every where we use "chip id" in this code we
|
||||
* mean the NodeID.
|
||||
*/
|
||||
#define WSP_ICS_CHIP_SHIFT 17
|
||||
|
||||
|
||||
static struct wsp_ics *ics_list;
|
||||
static int num_ics;
|
||||
|
||||
/* ICS Source controller accessors */
|
||||
|
||||
static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
|
||||
{
|
||||
unsigned long flags;
|
||||
u64 xive;
|
||||
|
||||
spin_lock_irqsave(&ics->lock, flags);
|
||||
out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
|
||||
xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
|
||||
spin_unlock_irqrestore(&ics->lock, flags);
|
||||
|
||||
return xive;
|
||||
}
|
||||
|
||||
static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
|
||||
{
|
||||
xive &= ~XIVE_ADDR_MASK;
|
||||
xive |= (irq & XIVE_ADDR_MASK);
|
||||
xive |= XIVE_WRITE_ENABLE;
|
||||
|
||||
out_be64(XIVE_UPDATE_REG(ics->regs), xive);
|
||||
}
|
||||
|
||||
static u64 xive_set_server(u64 xive, unsigned int server)
|
||||
{
|
||||
u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
|
||||
|
||||
xive &= mask;
|
||||
xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
|
||||
|
||||
return xive;
|
||||
}
|
||||
|
||||
static u64 xive_set_priority(u64 xive, unsigned int priority)
|
||||
{
|
||||
u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
|
||||
|
||||
xive &= mask;
|
||||
xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
|
||||
|
||||
return xive;
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* Find logical CPUs within mask on a given chip and store result in ret */
|
||||
void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
|
||||
{
|
||||
int cpu, chip;
|
||||
struct device_node *cpu_dn, *dn;
|
||||
const u32 *prop;
|
||||
|
||||
cpumask_clear(ret);
|
||||
for_each_cpu(cpu, mask) {
|
||||
cpu_dn = of_get_cpu_node(cpu, NULL);
|
||||
if (!cpu_dn)
|
||||
continue;
|
||||
|
||||
prop = of_get_property(cpu_dn, "at-node", NULL);
|
||||
if (!prop) {
|
||||
of_node_put(cpu_dn);
|
||||
continue;
|
||||
}
|
||||
|
||||
dn = of_find_node_by_phandle(*prop);
|
||||
of_node_put(cpu_dn);
|
||||
|
||||
chip = wsp_get_chip_id(dn);
|
||||
if (chip == chip_id)
|
||||
cpumask_set_cpu(cpu, ret);
|
||||
|
||||
of_node_put(dn);
|
||||
}
|
||||
}
|
||||
|
||||
/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
|
||||
static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
|
||||
const cpumask_t *affinity)
|
||||
{
|
||||
cpumask_var_t avail, newmask;
|
||||
int ret = -ENOMEM, cpu, cpu_rover = 0, target;
|
||||
int index = hwirq - ics->hwirq_start;
|
||||
unsigned int nodeid;
|
||||
|
||||
BUG_ON(index < 0 || index >= ics->count);
|
||||
|
||||
if (!ics->hwirq_cpu_map)
|
||||
return -ENOMEM;
|
||||
|
||||
if (!distribute_irqs) {
|
||||
ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Allocate needed CPU masks */
|
||||
if (!alloc_cpumask_var(&avail, GFP_KERNEL))
|
||||
goto ret;
|
||||
if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
|
||||
goto freeavail;
|
||||
|
||||
/* Find PBus attached to the source of this IRQ */
|
||||
nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
|
||||
|
||||
/* Find CPUs that could handle this IRQ */
|
||||
if (affinity)
|
||||
cpumask_and(avail, cpu_online_mask, affinity);
|
||||
else
|
||||
cpumask_copy(avail, cpu_online_mask);
|
||||
|
||||
/* Narrow selection down to logical CPUs on the same chip */
|
||||
cpus_on_chip(nodeid, avail, newmask);
|
||||
|
||||
/* Ensure we haven't narrowed it down to 0 */
|
||||
if (unlikely(cpumask_empty(newmask))) {
|
||||
if (unlikely(cpumask_empty(avail))) {
|
||||
ret = -1;
|
||||
goto out;
|
||||
}
|
||||
cpumask_copy(newmask, avail);
|
||||
}
|
||||
|
||||
/* Choose a CPU out of those we narrowed it down to in round robin */
|
||||
target = hwirq % cpumask_weight(newmask);
|
||||
for_each_cpu(cpu, newmask) {
|
||||
if (cpu_rover++ >= target) {
|
||||
ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
|
||||
ret = 0;
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
|
||||
/* Shouldn't happen */
|
||||
WARN_ON(1);
|
||||
|
||||
out:
|
||||
free_cpumask_var(newmask);
|
||||
freeavail:
|
||||
free_cpumask_var(avail);
|
||||
ret:
|
||||
if (ret < 0) {
|
||||
ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
|
||||
pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
|
||||
hwirq, ics->hwirq_cpu_map[index]);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void alloc_irq_map(struct wsp_ics *ics)
|
||||
{
|
||||
int i;
|
||||
|
||||
ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
|
||||
if (!ics->hwirq_cpu_map) {
|
||||
pr_warning("Allocate hwirq_cpu_map failed, "
|
||||
"IRQ balancing disabled\n");
|
||||
return;
|
||||
}
|
||||
|
||||
for (i=0; i < ics->count; i++)
|
||||
ics->hwirq_cpu_map[i] = xics_default_server;
|
||||
}
|
||||
|
||||
static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
|
||||
{
|
||||
int index = hwirq - ics->hwirq_start;
|
||||
|
||||
BUG_ON(index < 0 || index >= ics->count);
|
||||
|
||||
if (!ics->hwirq_cpu_map)
|
||||
return xics_default_server;
|
||||
|
||||
return ics->hwirq_cpu_map[index];
|
||||
}
|
||||
#else /* !CONFIG_SMP */
|
||||
static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
|
||||
const cpumask_t *affinity)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
|
||||
{
|
||||
return xics_default_server;
|
||||
}
|
||||
|
||||
static void alloc_irq_map(struct wsp_ics *ics) { }
|
||||
#endif
|
||||
|
||||
static void wsp_chip_unmask_irq(struct irq_data *d)
|
||||
{
|
||||
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
||||
struct wsp_ics *ics;
|
||||
int server;
|
||||
u64 xive;
|
||||
|
||||
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
||||
return;
|
||||
|
||||
ics = d->chip_data;
|
||||
if (WARN_ON(!ics))
|
||||
return;
|
||||
|
||||
server = get_irq_server(ics, hw_irq);
|
||||
|
||||
xive = wsp_ics_get_xive(ics, hw_irq);
|
||||
xive = xive_set_server(xive, server);
|
||||
xive = xive_set_priority(xive, DEFAULT_PRIORITY);
|
||||
wsp_ics_set_xive(ics, hw_irq, xive);
|
||||
}
|
||||
|
||||
static unsigned int wsp_chip_startup(struct irq_data *d)
|
||||
{
|
||||
/* unmask it */
|
||||
wsp_chip_unmask_irq(d);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
|
||||
{
|
||||
u64 xive;
|
||||
|
||||
if (hw_irq == XICS_IPI)
|
||||
return;
|
||||
|
||||
if (WARN_ON(!ics))
|
||||
return;
|
||||
xive = wsp_ics_get_xive(ics, hw_irq);
|
||||
xive = xive_set_server(xive, xics_default_server);
|
||||
xive = xive_set_priority(xive, LOWEST_PRIORITY);
|
||||
wsp_ics_set_xive(ics, hw_irq, xive);
|
||||
}
|
||||
|
||||
static void wsp_chip_mask_irq(struct irq_data *d)
|
||||
{
|
||||
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
||||
struct wsp_ics *ics = d->chip_data;
|
||||
|
||||
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
||||
return;
|
||||
|
||||
wsp_mask_real_irq(hw_irq, ics);
|
||||
}
|
||||
|
||||
static int wsp_chip_set_affinity(struct irq_data *d,
|
||||
const struct cpumask *cpumask, bool force)
|
||||
{
|
||||
unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
|
||||
struct wsp_ics *ics;
|
||||
int ret;
|
||||
u64 xive;
|
||||
|
||||
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
|
||||
return -1;
|
||||
|
||||
ics = d->chip_data;
|
||||
if (WARN_ON(!ics))
|
||||
return -1;
|
||||
xive = wsp_ics_get_xive(ics, hw_irq);
|
||||
|
||||
/*
|
||||
* For the moment only implement delivery to all cpus or one cpu.
|
||||
* Get current irq_server for the given irq
|
||||
*/
|
||||
ret = cache_hwirq_map(ics, d->irq, cpumask);
|
||||
if (ret == -1) {
|
||||
char cpulist[128];
|
||||
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
|
||||
pr_warning("%s: No online cpus in the mask %s for irq %d\n",
|
||||
__func__, cpulist, d->irq);
|
||||
return -1;
|
||||
} else if (ret == -ENOMEM) {
|
||||
pr_warning("%s: Out of memory\n", __func__);
|
||||
return -1;
|
||||
}
|
||||
|
||||
xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
|
||||
wsp_ics_set_xive(ics, hw_irq, xive);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip wsp_irq_chip = {
|
||||
.name = "WSP ICS",
|
||||
.irq_startup = wsp_chip_startup,
|
||||
.irq_mask = wsp_chip_mask_irq,
|
||||
.irq_unmask = wsp_chip_unmask_irq,
|
||||
.irq_set_affinity = wsp_chip_set_affinity
|
||||
};
|
||||
|
||||
static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
|
||||
{
|
||||
/* All ICSs in the system implement a global irq number space,
|
||||
* so match against them all. */
|
||||
return of_device_is_compatible(dn, "ibm,ppc-xics");
|
||||
}
|
||||
|
||||
static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
|
||||
{
|
||||
if (hwirq >= wsp_ics->hwirq_start &&
|
||||
hwirq < wsp_ics->hwirq_start + wsp_ics->count)
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int wsp_ics_map(struct ics *ics, unsigned int virq)
|
||||
{
|
||||
struct wsp_ics *wsp_ics = to_wsp_ics(ics);
|
||||
unsigned int hw_irq = virq_to_hw(virq);
|
||||
unsigned long flags;
|
||||
|
||||
if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
|
||||
return -ENOENT;
|
||||
|
||||
irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
|
||||
|
||||
irq_set_chip_data(virq, wsp_ics);
|
||||
|
||||
spin_lock_irqsave(&wsp_ics->lock, flags);
|
||||
bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
|
||||
spin_unlock_irqrestore(&wsp_ics->lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
|
||||
{
|
||||
struct wsp_ics *wsp_ics = to_wsp_ics(ics);
|
||||
|
||||
if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
|
||||
return;
|
||||
|
||||
pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
|
||||
wsp_mask_real_irq(hw_irq, wsp_ics);
|
||||
}
|
||||
|
||||
static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
|
||||
{
|
||||
struct wsp_ics *wsp_ics = to_wsp_ics(ics);
|
||||
|
||||
if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
|
||||
return -ENOENT;
|
||||
|
||||
return get_irq_server(wsp_ics, hw_irq);
|
||||
}
|
||||
|
||||
/* HW Number allocation API */
|
||||
|
||||
static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
|
||||
{
|
||||
struct device_node *iparent;
|
||||
int i;
|
||||
|
||||
iparent = of_irq_find_parent(dn);
|
||||
if (!iparent) {
|
||||
pr_err("wsp_ics: Failed to find interrupt parent!\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
for(i = 0; i < num_ics; i++) {
|
||||
if(ics_list[i].dn == iparent)
|
||||
break;
|
||||
}
|
||||
|
||||
if (i >= num_ics) {
|
||||
pr_err("wsp_ics: Unable to find parent bitmap!\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
return &ics_list[i];
|
||||
}
|
||||
|
||||
int wsp_ics_alloc_irq(struct device_node *dn, int num)
|
||||
{
|
||||
struct wsp_ics *ics;
|
||||
int order, offset;
|
||||
|
||||
ics = wsp_ics_find_dn_ics(dn);
|
||||
if (!ics)
|
||||
return -ENODEV;
|
||||
|
||||
/* Fast, but overly strict if num isn't a power of two */
|
||||
order = get_count_order(num);
|
||||
|
||||
spin_lock_irq(&ics->lock);
|
||||
offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
|
||||
spin_unlock_irq(&ics->lock);
|
||||
|
||||
if (offset < 0)
|
||||
return offset;
|
||||
|
||||
return offset + ics->hwirq_start;
|
||||
}
|
||||
|
||||
void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
|
||||
{
|
||||
struct wsp_ics *ics;
|
||||
|
||||
ics = wsp_ics_find_dn_ics(dn);
|
||||
if (WARN_ON(!ics))
|
||||
return;
|
||||
|
||||
spin_lock_irq(&ics->lock);
|
||||
bitmap_release_region(ics->bitmap, irq, 0);
|
||||
spin_unlock_irq(&ics->lock);
|
||||
}
|
||||
|
||||
/* Initialisation */
|
||||
|
||||
static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
|
||||
struct device_node *dn)
|
||||
{
|
||||
int len, i, j, size;
|
||||
u32 start, count;
|
||||
const u32 *p;
|
||||
|
||||
size = BITS_TO_LONGS(ics->count) * sizeof(long);
|
||||
ics->bitmap = kzalloc(size, GFP_KERNEL);
|
||||
if (!ics->bitmap) {
|
||||
pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
spin_lock_init(&ics->lock);
|
||||
|
||||
p = of_get_property(dn, "available-ranges", &len);
|
||||
if (!p || !len) {
|
||||
/* FIXME this should be a WARN() once mambo is updated */
|
||||
pr_err("wsp_ics: No available-ranges defined for %s\n",
|
||||
dn->full_name);
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (len % (2 * sizeof(u32)) != 0) {
|
||||
/* FIXME this should be a WARN() once mambo is updated */
|
||||
pr_err("wsp_ics: Invalid available-ranges for %s\n",
|
||||
dn->full_name);
|
||||
return 0;
|
||||
}
|
||||
|
||||
bitmap_fill(ics->bitmap, ics->count);
|
||||
|
||||
for (i = 0; i < len / sizeof(u32); i += 2) {
|
||||
start = of_read_number(p + i, 1);
|
||||
count = of_read_number(p + i + 1, 1);
|
||||
|
||||
pr_devel("%s: start: %d count: %d\n", __func__, start, count);
|
||||
|
||||
if ((start + count) > (ics->hwirq_start + ics->count) ||
|
||||
start < ics->hwirq_start) {
|
||||
pr_err("wsp_ics: Invalid range! -> %d to %d\n",
|
||||
start, start + count);
|
||||
break;
|
||||
}
|
||||
|
||||
for (j = 0; j < count; j++)
|
||||
bitmap_release_region(ics->bitmap,
|
||||
(start + j) - ics->hwirq_start, 0);
|
||||
}
|
||||
|
||||
/* Ensure LSIs are not available for allocation */
|
||||
bitmap_allocate_region(ics->bitmap, ics->lsi_base,
|
||||
get_count_order(ics->lsi_count));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
|
||||
{
|
||||
u32 lsi_buid, msi_buid, msi_base, msi_count;
|
||||
void __iomem *regs;
|
||||
const u32 *p;
|
||||
int rc, len, i;
|
||||
u64 caps, buid;
|
||||
|
||||
p = of_get_property(dn, "interrupt-ranges", &len);
|
||||
if (!p || len < (2 * sizeof(u32))) {
|
||||
pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
|
||||
dn->full_name);
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
if (len > (2 * sizeof(u32))) {
|
||||
pr_err("wsp_ics: Multiple ics ranges not supported.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
regs = of_iomap(dn, 0);
|
||||
if (!regs) {
|
||||
pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
ics->hwirq_start = of_read_number(p, 1);
|
||||
ics->count = of_read_number(p + 1, 1);
|
||||
ics->regs = regs;
|
||||
|
||||
ics->chip_id = wsp_get_chip_id(dn);
|
||||
if (WARN_ON(ics->chip_id < 0))
|
||||
ics->chip_id = 0;
|
||||
|
||||
/* Get some informations about the critter */
|
||||
caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
|
||||
buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
|
||||
ics->lsi_count = caps >> 56;
|
||||
msi_count = (caps >> 44) & 0x7ff;
|
||||
|
||||
/* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
|
||||
* rest is mixed in the interrupt number. We store the whole
|
||||
* thing though
|
||||
*/
|
||||
lsi_buid = (buid >> 48) & 0x1ff;
|
||||
ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
|
||||
msi_buid = (buid >> 37) & 0x7;
|
||||
msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
|
||||
|
||||
pr_info("wsp_ics: Found %s\n", dn->full_name);
|
||||
pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n",
|
||||
ics->hwirq_start, ics->hwirq_start + ics->count - 1);
|
||||
pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n",
|
||||
ics->lsi_count, ics->lsi_base,
|
||||
ics->lsi_base + ics->lsi_count - 1);
|
||||
pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n",
|
||||
msi_count, msi_base,
|
||||
msi_base + msi_count - 1);
|
||||
|
||||
/* Let's check the HW config is sane */
|
||||
if (ics->lsi_base < ics->hwirq_start ||
|
||||
(ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
|
||||
pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
|
||||
if (msi_base < ics->hwirq_start ||
|
||||
(msi_base + msi_count) > (ics->hwirq_start + ics->count))
|
||||
pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
|
||||
|
||||
/* We don't check for overlap between LSI and MSI, which will happen
|
||||
* if we use the same BUID, I'm not sure yet how legit that is.
|
||||
*/
|
||||
|
||||
rc = wsp_ics_bitmap_setup(ics, dn);
|
||||
if (rc) {
|
||||
iounmap(regs);
|
||||
return rc;
|
||||
}
|
||||
|
||||
ics->dn = of_node_get(dn);
|
||||
alloc_irq_map(ics);
|
||||
|
||||
for(i = 0; i < ics->count; i++)
|
||||
wsp_mask_real_irq(ics->hwirq_start + i, ics);
|
||||
|
||||
ics->ics.map = wsp_ics_map;
|
||||
ics->ics.mask_unknown = wsp_ics_mask_unknown;
|
||||
ics->ics.get_server = wsp_ics_get_server;
|
||||
ics->ics.host_match = wsp_ics_host_match;
|
||||
|
||||
xics_register_ics(&ics->ics);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __init wsp_ics_set_default_server(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
u32 hwid;
|
||||
|
||||
/* Find the server number for the boot cpu. */
|
||||
np = of_get_cpu_node(boot_cpuid, NULL);
|
||||
BUG_ON(!np);
|
||||
|
||||
hwid = get_hard_smp_processor_id(boot_cpuid);
|
||||
|
||||
pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
|
||||
xics_default_server = hwid;
|
||||
|
||||
of_node_put(np);
|
||||
}
|
||||
|
||||
static int __init wsp_ics_init(void)
|
||||
{
|
||||
struct device_node *dn;
|
||||
struct wsp_ics *ics;
|
||||
int rc, found;
|
||||
|
||||
wsp_ics_set_default_server();
|
||||
|
||||
found = 0;
|
||||
for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
|
||||
found++;
|
||||
|
||||
if (found == 0) {
|
||||
pr_err("wsp_ics: No ICS's found!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
|
||||
if (!ics_list) {
|
||||
pr_err("wsp_ics: No memory for structs.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
num_ics = 0;
|
||||
ics = ics_list;
|
||||
for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
|
||||
rc = wsp_ics_setup(ics, dn);
|
||||
if (rc == 0) {
|
||||
ics++;
|
||||
num_ics++;
|
||||
}
|
||||
}
|
||||
|
||||
if (found != num_ics) {
|
||||
pr_err("wsp_ics: Failed setting up %d ICS's\n",
|
||||
found - num_ics);
|
||||
return -1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void __init wsp_init_irq(void)
|
||||
{
|
||||
wsp_ics_init();
|
||||
xics_init();
|
||||
|
||||
/* We need to patch our irq chip's EOI to point to the right ICP */
|
||||
wsp_irq_chip.irq_eoi = icp_ops->eoi;
|
||||
}
|
||||
20
arch/powerpc/platforms/wsp/ics.h
Normal file
20
arch/powerpc/platforms/wsp/ics.h
Normal file
@ -0,0 +1,20 @@
|
||||
/*
|
||||
* Copyright 2009 IBM Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __ICS_H
|
||||
#define __ICS_H
|
||||
|
||||
#define XIVE_ADDR_MASK 0x7FFULL
|
||||
|
||||
extern void wsp_init_irq(void);
|
||||
|
||||
extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
|
||||
extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
|
||||
|
||||
#endif /* __ICS_H */
|
||||
332
arch/powerpc/platforms/wsp/opb_pic.c
Normal file
332
arch/powerpc/platforms/wsp/opb_pic.c
Normal file
@ -0,0 +1,332 @@
|
||||
/*
|
||||
* IBM Onboard Peripheral Bus Interrupt Controller
|
||||
*
|
||||
* Copyright 2010 Jack Miller, IBM Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/time.h>
|
||||
|
||||
#include <asm/reg_a2.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#define OPB_NR_IRQS 32
|
||||
|
||||
#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */
|
||||
#define OPB_MLSIR 0x50 /* MLS Interrupt Register */
|
||||
#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */
|
||||
#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */
|
||||
#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */
|
||||
|
||||
static int opb_index = 0;
|
||||
|
||||
struct opb_pic {
|
||||
struct irq_host *host;
|
||||
void *regs;
|
||||
int index;
|
||||
spinlock_t lock;
|
||||
};
|
||||
|
||||
static u32 opb_in(struct opb_pic *opb, int offset)
|
||||
{
|
||||
return in_be32(opb->regs + offset);
|
||||
}
|
||||
|
||||
static void opb_out(struct opb_pic *opb, int offset, u32 val)
|
||||
{
|
||||
out_be32(opb->regs + offset, val);
|
||||
}
|
||||
|
||||
static void opb_unmask_irq(struct irq_data *d)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
unsigned long flags;
|
||||
u32 ier, bitset;
|
||||
|
||||
opb = d->chip_data;
|
||||
bitset = (1 << (31 - irqd_to_hwirq(d)));
|
||||
|
||||
spin_lock_irqsave(&opb->lock, flags);
|
||||
|
||||
ier = opb_in(opb, OPB_MLSIER);
|
||||
opb_out(opb, OPB_MLSIER, ier | bitset);
|
||||
ier = opb_in(opb, OPB_MLSIER);
|
||||
|
||||
spin_unlock_irqrestore(&opb->lock, flags);
|
||||
}
|
||||
|
||||
static void opb_mask_irq(struct irq_data *d)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
unsigned long flags;
|
||||
u32 ier, mask;
|
||||
|
||||
opb = d->chip_data;
|
||||
mask = ~(1 << (31 - irqd_to_hwirq(d)));
|
||||
|
||||
spin_lock_irqsave(&opb->lock, flags);
|
||||
|
||||
ier = opb_in(opb, OPB_MLSIER);
|
||||
opb_out(opb, OPB_MLSIER, ier & mask);
|
||||
ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
|
||||
|
||||
spin_unlock_irqrestore(&opb->lock, flags);
|
||||
}
|
||||
|
||||
static void opb_ack_irq(struct irq_data *d)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
unsigned long flags;
|
||||
u32 bitset;
|
||||
|
||||
opb = d->chip_data;
|
||||
bitset = (1 << (31 - irqd_to_hwirq(d)));
|
||||
|
||||
spin_lock_irqsave(&opb->lock, flags);
|
||||
|
||||
opb_out(opb, OPB_MLSIR, bitset);
|
||||
opb_in(opb, OPB_MLSIR); // Flush posted writes
|
||||
|
||||
spin_unlock_irqrestore(&opb->lock, flags);
|
||||
}
|
||||
|
||||
static void opb_mask_ack_irq(struct irq_data *d)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
unsigned long flags;
|
||||
u32 bitset;
|
||||
u32 ier, ir;
|
||||
|
||||
opb = d->chip_data;
|
||||
bitset = (1 << (31 - irqd_to_hwirq(d)));
|
||||
|
||||
spin_lock_irqsave(&opb->lock, flags);
|
||||
|
||||
ier = opb_in(opb, OPB_MLSIER);
|
||||
opb_out(opb, OPB_MLSIER, ier & ~bitset);
|
||||
ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
|
||||
|
||||
opb_out(opb, OPB_MLSIR, bitset);
|
||||
ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
|
||||
|
||||
spin_unlock_irqrestore(&opb->lock, flags);
|
||||
}
|
||||
|
||||
static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
unsigned long flags;
|
||||
int invert, ipr, mask, bit;
|
||||
|
||||
opb = d->chip_data;
|
||||
|
||||
/* The only information we're interested in in the type is whether it's
|
||||
* a high or low trigger. For high triggered interrupts, the polarity
|
||||
* set for it in the MLS Interrupt Polarity Register is 0, for low
|
||||
* interrupts it's 1 so that the proper input in the MLS Interrupt Input
|
||||
* Register is interrupted as asserting the interrupt. */
|
||||
|
||||
switch (flow) {
|
||||
case IRQ_TYPE_NONE:
|
||||
opb_mask_irq(d);
|
||||
return 0;
|
||||
|
||||
case IRQ_TYPE_LEVEL_HIGH:
|
||||
invert = 0;
|
||||
break;
|
||||
|
||||
case IRQ_TYPE_LEVEL_LOW:
|
||||
invert = 1;
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
bit = (1 << (31 - irqd_to_hwirq(d)));
|
||||
mask = ~bit;
|
||||
|
||||
spin_lock_irqsave(&opb->lock, flags);
|
||||
|
||||
ipr = opb_in(opb, OPB_MLSIPR);
|
||||
ipr = (ipr & mask) | (invert ? bit : 0);
|
||||
opb_out(opb, OPB_MLSIPR, ipr);
|
||||
ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes
|
||||
|
||||
spin_unlock_irqrestore(&opb->lock, flags);
|
||||
|
||||
/* Record the type in the interrupt descriptor */
|
||||
irqd_set_trigger_type(d, flow);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip opb_irq_chip = {
|
||||
.name = "OPB",
|
||||
.irq_mask = opb_mask_irq,
|
||||
.irq_unmask = opb_unmask_irq,
|
||||
.irq_mask_ack = opb_mask_ack_irq,
|
||||
.irq_ack = opb_ack_irq,
|
||||
.irq_set_type = opb_set_irq_type
|
||||
};
|
||||
|
||||
static int opb_host_map(struct irq_host *host, unsigned int virq,
|
||||
irq_hw_number_t hwirq)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
|
||||
opb = host->host_data;
|
||||
|
||||
/* Most of the important stuff is handled by the generic host code, like
|
||||
* the lookup, so just attach some info to the virtual irq */
|
||||
|
||||
irq_set_chip_data(virq, opb);
|
||||
irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
|
||||
irq_set_irq_type(virq, IRQ_TYPE_NONE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int opb_host_xlate(struct irq_host *host, struct device_node *dn,
|
||||
const u32 *intspec, unsigned int intsize,
|
||||
irq_hw_number_t *out_hwirq, unsigned int *out_type)
|
||||
{
|
||||
/* Interrupt size must == 2 */
|
||||
BUG_ON(intsize != 2);
|
||||
*out_hwirq = intspec[0];
|
||||
*out_type = intspec[1];
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_host_ops opb_host_ops = {
|
||||
.map = opb_host_map,
|
||||
.xlate = opb_host_xlate,
|
||||
};
|
||||
|
||||
irqreturn_t opb_irq_handler(int irq, void *private)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
u32 ir, src, subvirq;
|
||||
|
||||
opb = (struct opb_pic *) private;
|
||||
|
||||
/* Read the OPB MLS Interrupt Register for
|
||||
* asserted interrupts */
|
||||
ir = opb_in(opb, OPB_MLSIR);
|
||||
if (!ir)
|
||||
return IRQ_NONE;
|
||||
|
||||
do {
|
||||
/* Get 1 - 32 source, *NOT* bit */
|
||||
src = 32 - ffs(ir);
|
||||
|
||||
/* Translate from the OPB's conception of interrupt number to
|
||||
* Linux's virtual IRQ */
|
||||
|
||||
subvirq = irq_linear_revmap(opb->host, src);
|
||||
|
||||
generic_handle_irq(subvirq);
|
||||
} while ((ir = opb_in(opb, OPB_MLSIR)));
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
struct opb_pic *opb_pic_init_one(struct device_node *dn)
|
||||
{
|
||||
struct opb_pic *opb;
|
||||
struct resource res;
|
||||
|
||||
if (of_address_to_resource(dn, 0, &res)) {
|
||||
printk(KERN_ERR "opb: Couldn't translate resource\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
|
||||
if (!opb) {
|
||||
printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/* Get access to the OPB MMIO registers */
|
||||
opb->regs = ioremap(res.start + 0x10000, 0x1000);
|
||||
if (!opb->regs) {
|
||||
printk(KERN_ERR "opb: Failed to allocate register space!\n");
|
||||
goto free_opb;
|
||||
}
|
||||
|
||||
/* Allocate an irq host so that Linux knows that despite only
|
||||
* having one interrupt to issue, we're the controller for multiple
|
||||
* hardware IRQs, so later we can lookup their virtual IRQs. */
|
||||
|
||||
opb->host = irq_alloc_host(dn, IRQ_HOST_MAP_LINEAR,
|
||||
OPB_NR_IRQS, &opb_host_ops, -1);
|
||||
|
||||
if (!opb->host) {
|
||||
printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
|
||||
goto free_regs;
|
||||
}
|
||||
|
||||
opb->index = opb_index++;
|
||||
spin_lock_init(&opb->lock);
|
||||
opb->host->host_data = opb;
|
||||
|
||||
/* Disable all interrupts by default */
|
||||
opb_out(opb, OPB_MLSASIER, 0);
|
||||
opb_out(opb, OPB_MLSIER, 0);
|
||||
|
||||
/* ACK any interrupts left by FW */
|
||||
opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
|
||||
|
||||
return opb;
|
||||
|
||||
free_regs:
|
||||
iounmap(opb->regs);
|
||||
free_opb:
|
||||
kfree(opb);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
void __init opb_pic_init(void)
|
||||
{
|
||||
struct device_node *dn;
|
||||
struct opb_pic *opb;
|
||||
int virq;
|
||||
int rc;
|
||||
|
||||
/* Call init_one for each OPB device */
|
||||
for_each_compatible_node(dn, NULL, "ibm,opb") {
|
||||
|
||||
/* Fill in an OPB struct */
|
||||
opb = opb_pic_init_one(dn);
|
||||
if (!opb) {
|
||||
printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
|
||||
continue;
|
||||
}
|
||||
|
||||
/* Map / get opb's hardware virtual irq */
|
||||
virq = irq_of_parse_and_map(dn, 0);
|
||||
if (virq <= 0) {
|
||||
printk("opb: irq_op_parse_and_map failed!\n");
|
||||
continue;
|
||||
}
|
||||
|
||||
/* Attach opb interrupt handler to new virtual IRQ */
|
||||
rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
|
||||
if (rc) {
|
||||
printk("opb: request_irq failed: %d\n", rc);
|
||||
continue;
|
||||
}
|
||||
|
||||
printk("OPB%d init with %d IRQs at %p\n", opb->index,
|
||||
OPB_NR_IRQS, opb->regs);
|
||||
}
|
||||
}
|
||||
95
arch/powerpc/platforms/wsp/psr2.c
Normal file
95
arch/powerpc/platforms/wsp/psr2.c
Normal file
@ -0,0 +1,95 @@
|
||||
/*
|
||||
* Copyright 2008-2011, IBM Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/smp.h>
|
||||
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include "ics.h"
|
||||
#include "wsp.h"
|
||||
|
||||
|
||||
static void psr2_spin(void)
|
||||
{
|
||||
hard_irq_disable();
|
||||
for (;;) ;
|
||||
}
|
||||
|
||||
static void psr2_restart(char *cmd)
|
||||
{
|
||||
psr2_spin();
|
||||
}
|
||||
|
||||
static int psr2_probe_devices(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
/* Our RTC is a ds1500. It seems to be programatically compatible
|
||||
* with the ds1511 for which we have a driver so let's use that
|
||||
*/
|
||||
np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
|
||||
if (np != NULL) {
|
||||
struct resource res;
|
||||
if (of_address_to_resource(np, 0, &res) == 0)
|
||||
platform_device_register_simple("ds1511", 0, &res, 1);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
machine_arch_initcall(psr2_md, psr2_probe_devices);
|
||||
|
||||
static void __init psr2_setup_arch(void)
|
||||
{
|
||||
/* init to some ~sane value until calibrate_delay() runs */
|
||||
loops_per_jiffy = 50000000;
|
||||
|
||||
scom_init_wsp();
|
||||
|
||||
/* Setup SMP callback */
|
||||
#ifdef CONFIG_SMP
|
||||
a2_setup_smp();
|
||||
#endif
|
||||
}
|
||||
|
||||
static int __init psr2_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static void __init psr2_init_irq(void)
|
||||
{
|
||||
wsp_init_irq();
|
||||
opb_pic_init();
|
||||
}
|
||||
|
||||
define_machine(psr2_md) {
|
||||
.name = "PSR2 A2",
|
||||
.probe = psr2_probe,
|
||||
.setup_arch = psr2_setup_arch,
|
||||
.restart = psr2_restart,
|
||||
.power_off = psr2_spin,
|
||||
.halt = psr2_spin,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.init_IRQ = psr2_init_irq,
|
||||
.progress = udbg_progress,
|
||||
.power_save = book3e_idle,
|
||||
};
|
||||
427
arch/powerpc/platforms/wsp/scom_smp.c
Normal file
427
arch/powerpc/platforms/wsp/scom_smp.c
Normal file
@ -0,0 +1,427 @@
|
||||
/*
|
||||
* SCOM support for A2 platforms
|
||||
*
|
||||
* Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
|
||||
* Michael Ellerman, IBM Corp.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/cpumask.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/cputhreads.h>
|
||||
#include <asm/reg_a2.h>
|
||||
#include <asm/scom.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include "wsp.h"
|
||||
|
||||
#define SCOM_RAMC 0x2a /* Ram Command */
|
||||
#define SCOM_RAMC_TGT1_EXT 0x80000000
|
||||
#define SCOM_RAMC_SRC1_EXT 0x40000000
|
||||
#define SCOM_RAMC_SRC2_EXT 0x20000000
|
||||
#define SCOM_RAMC_SRC3_EXT 0x10000000
|
||||
#define SCOM_RAMC_ENABLE 0x00080000
|
||||
#define SCOM_RAMC_THREADSEL 0x00060000
|
||||
#define SCOM_RAMC_EXECUTE 0x00010000
|
||||
#define SCOM_RAMC_MSR_OVERRIDE 0x00008000
|
||||
#define SCOM_RAMC_MSR_PR 0x00004000
|
||||
#define SCOM_RAMC_MSR_GS 0x00002000
|
||||
#define SCOM_RAMC_FORCE 0x00001000
|
||||
#define SCOM_RAMC_FLUSH 0x00000800
|
||||
#define SCOM_RAMC_INTERRUPT 0x00000004
|
||||
#define SCOM_RAMC_ERROR 0x00000002
|
||||
#define SCOM_RAMC_DONE 0x00000001
|
||||
#define SCOM_RAMI 0x29 /* Ram Instruction */
|
||||
#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */
|
||||
#define SCOM_RAMIC_INSN 0xffffffff00000000
|
||||
#define SCOM_RAMD 0x2d /* Ram Data */
|
||||
#define SCOM_RAMDH 0x2e /* Ram Data High */
|
||||
#define SCOM_RAMDL 0x2f /* Ram Data Low */
|
||||
#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */
|
||||
#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000
|
||||
#define SCOM_PCCR0_ENABLE_RAM 0x40000000
|
||||
#define SCOM_THRCTL 0x30 /* Thread Control and Status */
|
||||
#define SCOM_THRCTL_T0_STOP 0x80000000
|
||||
#define SCOM_THRCTL_T1_STOP 0x40000000
|
||||
#define SCOM_THRCTL_T2_STOP 0x20000000
|
||||
#define SCOM_THRCTL_T3_STOP 0x10000000
|
||||
#define SCOM_THRCTL_T0_STEP 0x08000000
|
||||
#define SCOM_THRCTL_T1_STEP 0x04000000
|
||||
#define SCOM_THRCTL_T2_STEP 0x02000000
|
||||
#define SCOM_THRCTL_T3_STEP 0x01000000
|
||||
#define SCOM_THRCTL_T0_RUN 0x00800000
|
||||
#define SCOM_THRCTL_T1_RUN 0x00400000
|
||||
#define SCOM_THRCTL_T2_RUN 0x00200000
|
||||
#define SCOM_THRCTL_T3_RUN 0x00100000
|
||||
#define SCOM_THRCTL_T0_PM 0x00080000
|
||||
#define SCOM_THRCTL_T1_PM 0x00040000
|
||||
#define SCOM_THRCTL_T2_PM 0x00020000
|
||||
#define SCOM_THRCTL_T3_PM 0x00010000
|
||||
#define SCOM_THRCTL_T0_UDE 0x00008000
|
||||
#define SCOM_THRCTL_T1_UDE 0x00004000
|
||||
#define SCOM_THRCTL_T2_UDE 0x00002000
|
||||
#define SCOM_THRCTL_T3_UDE 0x00001000
|
||||
#define SCOM_THRCTL_ASYNC_DIS 0x00000800
|
||||
#define SCOM_THRCTL_TB_DIS 0x00000400
|
||||
#define SCOM_THRCTL_DEC_DIS 0x00000200
|
||||
#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */
|
||||
#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */
|
||||
|
||||
|
||||
static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
|
||||
|
||||
static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
|
||||
{
|
||||
scom_map_t scom = per_cpu(scom_ptrs, cpu);
|
||||
int tcpu;
|
||||
|
||||
if (scom_map_ok(scom)) {
|
||||
*first_thread = 0;
|
||||
return scom;
|
||||
}
|
||||
|
||||
*first_thread = 1;
|
||||
|
||||
scom = scom_map_device(np, 0);
|
||||
|
||||
for (tcpu = cpu_first_thread_sibling(cpu);
|
||||
tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
|
||||
per_cpu(scom_ptrs, tcpu) = scom;
|
||||
|
||||
/* Hack: for the boot core, this will actually get called on
|
||||
* the second thread up, not the first so our test above will
|
||||
* set first_thread incorrectly. */
|
||||
if (cpu_first_thread_sibling(cpu) == 0)
|
||||
*first_thread = 0;
|
||||
|
||||
return scom;
|
||||
}
|
||||
|
||||
static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
|
||||
{
|
||||
u64 cmd, mask, val;
|
||||
int n = 0;
|
||||
|
||||
cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
|
||||
| ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
|
||||
mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
|
||||
|
||||
scom_write(scom, SCOM_RAMIC, cmd);
|
||||
|
||||
while (!((val = scom_read(scom, SCOM_RAMC)) & mask)) {
|
||||
pr_devel("Waiting on RAMC = 0x%llx\n", val);
|
||||
if (++n == 3) {
|
||||
pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
|
||||
insn, thread);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
if (val & SCOM_RAMC_INTERRUPT) {
|
||||
pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
|
||||
insn, thread);
|
||||
return -SCOM_RAMC_INTERRUPT;
|
||||
}
|
||||
|
||||
if (val & SCOM_RAMC_ERROR) {
|
||||
pr_err("RAMC error on instruction 0x%08x, thread %d\n",
|
||||
insn, thread);
|
||||
return -SCOM_RAMC_ERROR;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
|
||||
u64 *out_gpr)
|
||||
{
|
||||
int rc;
|
||||
|
||||
/* or rN, rN, rN */
|
||||
u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
|
||||
rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
*out_gpr = scom_read(scom, SCOM_RAMD);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
|
||||
{
|
||||
int rc, sprhi, sprlo;
|
||||
u32 insn;
|
||||
|
||||
sprhi = spr >> 5;
|
||||
sprlo = spr & 0x1f;
|
||||
insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
|
||||
|
||||
if (spr == 0x0ff0)
|
||||
insn = 0x7c2000a6; /* mfmsr r1 */
|
||||
|
||||
rc = a2_scom_ram(scom, thread, insn, 0xf);
|
||||
if (rc)
|
||||
return rc;
|
||||
return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
|
||||
}
|
||||
|
||||
static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
|
||||
int alt, u64 val)
|
||||
{
|
||||
u32 lis = 0x3c000000 | (gpr << 21);
|
||||
u32 li = 0x38000000 | (gpr << 21);
|
||||
u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
|
||||
u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
|
||||
u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
|
||||
u32 highest = val >> 48;
|
||||
u32 higher = (val >> 32) & 0xffff;
|
||||
u32 high = (val >> 16) & 0xffff;
|
||||
u32 low = val & 0xffff;
|
||||
int lext = alt ? 0x8 : 0x0;
|
||||
int oext = alt ? 0xf : 0x0;
|
||||
int rc = 0;
|
||||
|
||||
if (highest)
|
||||
rc |= a2_scom_ram(scom, thread, lis | highest, lext);
|
||||
|
||||
if (higher) {
|
||||
if (highest)
|
||||
rc |= a2_scom_ram(scom, thread, oris | higher, oext);
|
||||
else
|
||||
rc |= a2_scom_ram(scom, thread, li | higher, lext);
|
||||
}
|
||||
|
||||
if (highest || higher)
|
||||
rc |= a2_scom_ram(scom, thread, rldicr32, oext);
|
||||
|
||||
if (high) {
|
||||
if (highest || higher)
|
||||
rc |= a2_scom_ram(scom, thread, oris | high, oext);
|
||||
else
|
||||
rc |= a2_scom_ram(scom, thread, lis | high, lext);
|
||||
}
|
||||
|
||||
if (highest || higher || high)
|
||||
rc |= a2_scom_ram(scom, thread, ori | low, oext);
|
||||
else
|
||||
rc |= a2_scom_ram(scom, thread, li | low, lext);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
|
||||
{
|
||||
int sprhi = spr >> 5;
|
||||
int sprlo = spr & 0x1f;
|
||||
/* mtspr spr, r1 */
|
||||
u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
|
||||
|
||||
if (spr == 0x0ff0)
|
||||
insn = 0x7c200124; /* mtmsr r1 */
|
||||
|
||||
if (a2_scom_setgpr(scom, thread, 1, 1, val))
|
||||
return -1;
|
||||
|
||||
return a2_scom_ram(scom, thread, insn, 0xf);
|
||||
}
|
||||
|
||||
static int a2_scom_initial_tlb(scom_map_t scom, int thread)
|
||||
{
|
||||
extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
|
||||
extern u32 a2_tlbinit_after_iprot_flush[];
|
||||
extern u32 a2_tlbinit_after_linear_map[];
|
||||
u32 assoc, entries, i;
|
||||
u64 epn, tlbcfg;
|
||||
u32 *p;
|
||||
int rc;
|
||||
|
||||
/* Invalidate all entries (including iprot) */
|
||||
|
||||
rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
|
||||
if (rc)
|
||||
goto scom_fail;
|
||||
entries = tlbcfg & TLBnCFG_N_ENTRY;
|
||||
assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
|
||||
epn = 0;
|
||||
|
||||
/* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
|
||||
a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
|
||||
/* Set MMUCR3 to write all thids bit to the TLB */
|
||||
a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
|
||||
|
||||
/* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
|
||||
a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
|
||||
a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
|
||||
for (i = 0; i < entries; i++) {
|
||||
|
||||
a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
|
||||
|
||||
/* tlbwe */
|
||||
rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
|
||||
if (rc)
|
||||
goto scom_fail;
|
||||
|
||||
/* Next entry is new address? */
|
||||
if((i + 1) % assoc == 0) {
|
||||
epn += (1 << 30);
|
||||
a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
|
||||
}
|
||||
}
|
||||
|
||||
/* Setup args for linear mapping */
|
||||
rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
|
||||
if (rc)
|
||||
goto scom_fail;
|
||||
|
||||
/* Linear mapping */
|
||||
for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
|
||||
rc = a2_scom_ram(scom, thread, *p, 0);
|
||||
if (rc)
|
||||
goto scom_fail;
|
||||
}
|
||||
|
||||
/*
|
||||
* For the boot thread, between the linear mapping and the debug
|
||||
* mappings there is a loop to flush iprot mappings. Ramming doesn't do
|
||||
* branches, but the secondary threads don't need to be nearly as smart
|
||||
* (i.e. we don't need to worry about invalidating the mapping we're
|
||||
* standing on).
|
||||
*/
|
||||
|
||||
/* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
|
||||
for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
|
||||
rc = a2_scom_ram(scom, thread, *p, 0);
|
||||
if (rc)
|
||||
goto scom_fail;
|
||||
}
|
||||
|
||||
scom_fail:
|
||||
if (rc)
|
||||
pr_err("Setting up initial TLB failed, err %d\n", rc);
|
||||
|
||||
if (rc == -SCOM_RAMC_INTERRUPT) {
|
||||
/* Interrupt, dump some status */
|
||||
int rc[10];
|
||||
u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
|
||||
rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
|
||||
rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
|
||||
rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
|
||||
rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
|
||||
rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
|
||||
rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
|
||||
rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
|
||||
rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
|
||||
rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
|
||||
rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
|
||||
pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
|
||||
pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
|
||||
pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
|
||||
pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
|
||||
pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
|
||||
pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
|
||||
pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
|
||||
pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
|
||||
pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
|
||||
pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
|
||||
}
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
int __devinit a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
|
||||
struct device_node *np)
|
||||
{
|
||||
u64 init_iar, init_msr, init_ccr2;
|
||||
unsigned long start_here;
|
||||
int rc, core_setup;
|
||||
scom_map_t scom;
|
||||
u64 pccr0;
|
||||
|
||||
scom = get_scom(lcpu, np, &core_setup);
|
||||
if (!scom) {
|
||||
printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
|
||||
return -1;
|
||||
}
|
||||
|
||||
pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
|
||||
|
||||
pccr0 = scom_read(scom, SCOM_PCCR0);
|
||||
scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
|
||||
SCOM_PCCR0_ENABLE_RAM);
|
||||
|
||||
/* Stop the thead with THRCTL. If we are setting up the TLB we stop all
|
||||
* threads. We also disable asynchronous interrupts while RAMing.
|
||||
*/
|
||||
if (core_setup)
|
||||
scom_write(scom, SCOM_THRCTL_OR,
|
||||
SCOM_THRCTL_T0_STOP |
|
||||
SCOM_THRCTL_T1_STOP |
|
||||
SCOM_THRCTL_T2_STOP |
|
||||
SCOM_THRCTL_T3_STOP |
|
||||
SCOM_THRCTL_ASYNC_DIS);
|
||||
else
|
||||
scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
|
||||
|
||||
/* Flush its pipeline just in case */
|
||||
scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
|
||||
SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
|
||||
|
||||
a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
|
||||
a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
|
||||
a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
|
||||
|
||||
/* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
|
||||
rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
|
||||
if (rc) {
|
||||
pr_err("Failed to set MSR ! err %d\n", rc);
|
||||
return rc;
|
||||
}
|
||||
|
||||
/* RAM in an sync/isync for the sake of it */
|
||||
a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
|
||||
a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
|
||||
|
||||
if (core_setup) {
|
||||
pr_devel("CPU%d is first thread in core, initializing TLB...\n",
|
||||
lcpu);
|
||||
rc = a2_scom_initial_tlb(scom, thr_idx);
|
||||
if (rc)
|
||||
goto fail;
|
||||
}
|
||||
|
||||
start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
|
||||
: generic_secondary_thread_init);
|
||||
pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
|
||||
|
||||
rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
|
||||
rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
|
||||
get_hard_smp_processor_id(lcpu));
|
||||
/*
|
||||
* Tell book3e_secondary_core_init not to set up the TLB, we've
|
||||
* already done that.
|
||||
*/
|
||||
rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
|
||||
|
||||
rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
|
||||
|
||||
scom_write(scom, SCOM_RAMC, 0);
|
||||
scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
|
||||
scom_write(scom, SCOM_PCCR0, pccr0);
|
||||
fail:
|
||||
pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded");
|
||||
if (rc) {
|
||||
pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
|
||||
init_iar, init_msr, init_ccr2);
|
||||
}
|
||||
|
||||
return rc;
|
||||
}
|
||||
77
arch/powerpc/platforms/wsp/scom_wsp.c
Normal file
77
arch/powerpc/platforms/wsp/scom_wsp.c
Normal file
@ -0,0 +1,77 @@
|
||||
/*
|
||||
* SCOM backend for WSP
|
||||
*
|
||||
* Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/cpumask.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/cputhreads.h>
|
||||
#include <asm/reg_a2.h>
|
||||
#include <asm/scom.h>
|
||||
#include <asm/udbg.h>
|
||||
|
||||
#include "wsp.h"
|
||||
|
||||
|
||||
static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
|
||||
{
|
||||
struct resource r;
|
||||
u64 xscom_addr;
|
||||
|
||||
if (!of_get_property(dev, "scom-controller", NULL)) {
|
||||
pr_err("%s: device %s is not a SCOM controller\n",
|
||||
__func__, dev->full_name);
|
||||
return SCOM_MAP_INVALID;
|
||||
}
|
||||
|
||||
if (of_address_to_resource(dev, 0, &r)) {
|
||||
pr_debug("Failed to find SCOM controller address\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Transform the SCOM address into an XSCOM offset */
|
||||
xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
|
||||
|
||||
return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
|
||||
}
|
||||
|
||||
static void wsp_scom_unmap(scom_map_t map)
|
||||
{
|
||||
iounmap((void *)map);
|
||||
}
|
||||
|
||||
static u64 wsp_scom_read(scom_map_t map, u32 reg)
|
||||
{
|
||||
u64 __iomem *addr = (u64 __iomem *)map;
|
||||
|
||||
return in_be64(addr + reg);
|
||||
}
|
||||
|
||||
static void wsp_scom_write(scom_map_t map, u32 reg, u64 value)
|
||||
{
|
||||
u64 __iomem *addr = (u64 __iomem *)map;
|
||||
|
||||
return out_be64(addr + reg, value);
|
||||
}
|
||||
|
||||
static const struct scom_controller wsp_scom_controller = {
|
||||
.map = wsp_scom_map,
|
||||
.unmap = wsp_scom_unmap,
|
||||
.read = wsp_scom_read,
|
||||
.write = wsp_scom_write
|
||||
};
|
||||
|
||||
void scom_init_wsp(void)
|
||||
{
|
||||
scom_init(&wsp_scom_controller);
|
||||
}
|
||||
36
arch/powerpc/platforms/wsp/setup.c
Normal file
36
arch/powerpc/platforms/wsp/setup.c
Normal file
@ -0,0 +1,36 @@
|
||||
/*
|
||||
* Copyright 2010 Michael Ellerman, IBM Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include "wsp.h"
|
||||
|
||||
/*
|
||||
* Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
|
||||
* Won't work for nodes that are not a descendant of a wsp node.
|
||||
*/
|
||||
int wsp_get_chip_id(struct device_node *dn)
|
||||
{
|
||||
const u32 *p;
|
||||
int rc;
|
||||
|
||||
/* Start looking at the specified node, not its parent */
|
||||
dn = of_node_get(dn);
|
||||
while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
|
||||
dn = of_get_next_parent(dn);
|
||||
|
||||
if (!dn)
|
||||
return -1;
|
||||
|
||||
rc = *p;
|
||||
of_node_put(dn);
|
||||
|
||||
return rc;
|
||||
}
|
||||
87
arch/powerpc/platforms/wsp/smp.c
Normal file
87
arch/powerpc/platforms/wsp/smp.c
Normal file
@ -0,0 +1,87 @@
|
||||
/*
|
||||
* SMP Support for A2 platforms
|
||||
*
|
||||
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/cpumask.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/smp.h>
|
||||
|
||||
#include <asm/dbell.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/xics.h>
|
||||
|
||||
#include "ics.h"
|
||||
#include "wsp.h"
|
||||
|
||||
static void __devinit smp_a2_setup_cpu(int cpu)
|
||||
{
|
||||
doorbell_setup_this_cpu();
|
||||
|
||||
if (cpu != boot_cpuid)
|
||||
xics_setup_cpu();
|
||||
}
|
||||
|
||||
int __devinit smp_a2_kick_cpu(int nr)
|
||||
{
|
||||
const char *enable_method;
|
||||
struct device_node *np;
|
||||
int thr_idx;
|
||||
|
||||
if (nr < 0 || nr >= NR_CPUS)
|
||||
return -ENOENT;
|
||||
|
||||
np = of_get_cpu_node(nr, &thr_idx);
|
||||
if (!np)
|
||||
return -ENODEV;
|
||||
|
||||
enable_method = of_get_property(np, "enable-method", NULL);
|
||||
pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
|
||||
|
||||
if (!enable_method) {
|
||||
printk(KERN_ERR "CPU%d has no enable-method\n", nr);
|
||||
return -ENOENT;
|
||||
} else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
|
||||
if (a2_scom_startup_cpu(nr, thr_idx, np))
|
||||
return -1;
|
||||
} else {
|
||||
printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
|
||||
nr, enable_method);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* The processor is currently spinning, waiting for the
|
||||
* cpu_start field to become non-zero After we set cpu_start,
|
||||
* the processor will continue on to secondary_start
|
||||
*/
|
||||
paca[nr].cpu_start = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init smp_a2_probe(void)
|
||||
{
|
||||
return cpus_weight(cpu_possible_map);
|
||||
}
|
||||
|
||||
static struct smp_ops_t a2_smp_ops = {
|
||||
.message_pass = doorbell_message_pass,
|
||||
.probe = smp_a2_probe,
|
||||
.kick_cpu = smp_a2_kick_cpu,
|
||||
.setup_cpu = smp_a2_setup_cpu,
|
||||
};
|
||||
|
||||
void __init a2_setup_smp(void)
|
||||
{
|
||||
smp_ops = &a2_smp_ops;
|
||||
}
|
||||
17
arch/powerpc/platforms/wsp/wsp.h
Normal file
17
arch/powerpc/platforms/wsp/wsp.h
Normal file
@ -0,0 +1,17 @@
|
||||
#ifndef __WSP_H
|
||||
#define __WSP_H
|
||||
|
||||
#include <asm/wsp.h>
|
||||
|
||||
extern void wsp_setup_pci(void);
|
||||
extern void scom_init_wsp(void);
|
||||
|
||||
extern void a2_setup_smp(void);
|
||||
extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
|
||||
struct device_node *np);
|
||||
int smp_a2_cpu_bootable(unsigned int nr);
|
||||
int __devinit smp_a2_kick_cpu(int nr);
|
||||
|
||||
void opb_pic_init(void);
|
||||
|
||||
#endif /* __WSP_H */
|
||||
@ -7,6 +7,7 @@
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
Loading…
Reference in New Issue
Block a user