renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2025-01-21 03:54:03 +08:00
Code

Merge commit 'v2.6.29-rc7' into core/locking

Browse Source
This commit is contained in:
Ingo Molnar 2009-03-05 11:45:22 +01:00
commit a140feab42
867 changed files with 33260 additions and 15839 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
CREDITS
View File

@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
N: Pavel Machek
E: pavel@ucw.cz
E: pavel@suse.cz
D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
D: work on suspend-to-ram/disk, killing duplicates from ioctl32

43
Documentation/ABI/testing/sysfs-bus-pci
View File

@ -1,3 +1,46 @@
What: /sys/bus/pci/drivers/.../bind
Date: December 2003
Contact: linux-pci@vger.kernel.org
Description:
Writing a device location to this file will cause
the driver to attempt to bind to the device found at
this location. This is useful for overriding default
bindings. The format for the location is: DDDD:BB:DD.F.
That is Domain:Bus:Device.Function and is the same as
found in /sys/bus/pci/devices/. For example:
# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
(Note: kernels before 2.6.28 may require echo -n).
What: /sys/bus/pci/drivers/.../unbind
Date: December 2003
Contact: linux-pci@vger.kernel.org
Description:
Writing a device location to this file will cause the
driver to attempt to unbind from the device found at
this location. This may be useful when overriding default
bindings. The format for the location is: DDDD:BB:DD.F.
That is Domain:Bus:Device.Function and is the same as
found in /sys/bus/pci/devices/. For example:
# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
(Note: kernels before 2.6.28 may require echo -n).
What: /sys/bus/pci/drivers/.../new_id
Date: December 2003
Contact: linux-pci@vger.kernel.org
Description:
Writing a device ID to this file will attempt to
dynamically add a new device ID to a PCI device driver.
This may allow the driver to support more hardware than
was included in the driver's static device ID support
table at compile time. The format for the device ID is:
VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID,
Device ID, Subsystem Vendor ID, Subsystem Device ID,
Class, Class Mask, and Private Driver Data. The Vendor ID
and Device ID fields are required, the rest are optional.
Upon successfully adding an ID, the driver will probe
for the device and attempt to bind to it. For example:
# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
What: /sys/bus/pci/devices/.../vpd
Date: February 2008
Contact: Ben Hutchings <bhutchings@solarflare.com>

2
Documentation/ABI/testing/sysfs-firmware-memmap
View File

@ -1,6 +1,6 @@
What: /sys/firmware/memmap/
Date: June 2008
Contact: Bernhard Walle <bwalle@suse.de>
Contact: Bernhard Walle <bernhard.walle@gmx.de>
Description:
On all platforms, the firmware provides a memory map which the
kernel reads. The resources from that memory map are registered

2
Documentation/DocBook/Makefile
View File

@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
DOCBOOKS := z8530book.xml mcabook.xml \
DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \

418
Documentation/DocBook/device-drivers.tmpl Normal file
View File

@ -0,0 +1,418 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="LinuxDriversAPI">
<bookinfo>
<title>Linux Device Drivers</title>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="Basics">
<title>Driver Basics</title>
<sect1><title>Driver Entry and Exit points</title>
!Iinclude/linux/init.h
</sect1>
<sect1><title>Atomic and pointer manipulation</title>
!Iarch/x86/include/asm/atomic_32.h
!Iarch/x86/include/asm/unaligned.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>
!Iinclude/linux/sched.h
!Ekernel/sched.c
!Ekernel/timer.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
!Iinclude/linux/hrtimer.h
!Ekernel/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
!Ikernel/exit.c
!Ikernel/signal.c
!Iinclude/linux/kthread.h
!Ekernel/kthread.c
</sect1>
<sect1><title>Kernel objects manipulation</title>
<!--
X!Iinclude/linux/kobject.h
-->
!Elib/kobject.c
</sect1>
<sect1><title>Kernel utility functions</title>
!Iinclude/linux/kernel.h
!Ekernel/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcupdate.c
</sect1>
<sect1><title>Device Resource Management</title>
!Edrivers/base/devres.c
</sect1>
</chapter>
<chapter id="devdrivers">
<title>Device drivers infrastructure</title>
<sect1><title>Device Drivers Base</title>
<!--
X!Iinclude/linux/device.h
-->
!Edrivers/base/driver.c
!Edrivers/base/core.c
!Edrivers/base/class.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
<!-- Cannot be included, because
attribute_container_add_class_device_adapter
and attribute_container_classdev_to_container
exceed allowed 44 characters maximum
X!Edrivers/base/attribute_container.c
-->
!Edrivers/base/sys.c
<!--
X!Edrivers/base/interface.c
-->
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
<sect1><title>Device Drivers Power Management</title>
!Edrivers/base/power/main.c
</sect1>
<sect1><title>Device Drivers ACPI Support</title>
<!-- Internal functions only
X!Edrivers/acpi/sleep/main.c
X!Edrivers/acpi/sleep/wakeup.c
X!Edrivers/acpi/motherboard.c
X!Edrivers/acpi/bus.c
-->
!Edrivers/acpi/scan.c
!Idrivers/acpi/scan.c
<!-- No correct structured comments
X!Edrivers/acpi/pci_bind.c
-->
</sect1>
<sect1><title>Device drivers PnP support</title>
!Idrivers/pnp/core.c
<!-- No correct structured comments
X!Edrivers/pnp/system.c
-->
!Edrivers/pnp/card.c
!Idrivers/pnp/driver.c
!Edrivers/pnp/manager.c
!Edrivers/pnp/support.c
</sect1>
<sect1><title>Userspace IO devices</title>
!Edrivers/uio/uio.c
!Iinclude/linux/uio_driver.h
</sect1>
</chapter>
<chapter id="parportdev">
<title>Parallel Port Devices</title>
!Iinclude/linux/parport.h
!Edrivers/parport/ieee1284.c
!Edrivers/parport/share.c
!Idrivers/parport/daisy.c
</chapter>
<chapter id="message_devices">
<title>Message-based devices</title>
<sect1><title>Fusion message devices</title>
!Edrivers/message/fusion/mptbase.c
!Idrivers/message/fusion/mptbase.c
!Edrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptctl.c
!Idrivers/message/fusion/mptspi.c
!Idrivers/message/fusion/mptfc.c
!Idrivers/message/fusion/mptlan.c
</sect1>
<sect1><title>I2O message devices</title>
!Iinclude/linux/i2o.h
!Idrivers/message/i2o/core.h
!Edrivers/message/i2o/iop.c
!Idrivers/message/i2o/iop.c
!Idrivers/message/i2o/config-osm.c
!Edrivers/message/i2o/exec-osm.c
!Idrivers/message/i2o/exec-osm.c
!Idrivers/message/i2o/bus-osm.c
!Edrivers/message/i2o/device.c
!Idrivers/message/i2o/device.c
!Idrivers/message/i2o/driver.c
!Idrivers/message/i2o/pci.c
!Idrivers/message/i2o/i2o_block.c
!Idrivers/message/i2o/i2o_scsi.c
!Idrivers/message/i2o/i2o_proc.c
</sect1>
</chapter>
<chapter id="snddev">
<title>Sound Devices</title>
!Iinclude/sound/core.h
!Esound/sound_core.c
!Iinclude/sound/pcm.h
!Esound/core/pcm.c
!Esound/core/device.c
!Esound/core/info.c
!Esound/core/rawmidi.c
!Esound/core/sound.c
!Esound/core/memory.c
!Esound/core/pcm_memory.c
!Esound/core/init.c
!Esound/core/isadma.c
!Esound/core/control.c
!Esound/core/pcm_lib.c
!Esound/core/hwdep.c
!Esound/core/pcm_native.c
!Esound/core/memalloc.c
<!-- FIXME: Removed for now since no structured comments in source
X!Isound/sound_firmware.c
-->
</chapter>
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Iinclude/linux/serial_core.h
!Edrivers/serial/serial_core.c
!Edrivers/serial/8250.c
</chapter>
<chapter id="fbdev">
<title>Frame Buffer Library</title>
<para>
The frame buffer drivers depend heavily on four data structures.
These structures are declared in include/linux/fb.h. They are
fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
The last three can be made available to and from userland.
</para>
<para>
fb_info defines the current state of a particular video card.
Inside fb_info, there exists a fb_ops structure which is a
collection of needed functions to make fbdev and fbcon work.
fb_info is only visible to the kernel.
</para>
<para>
fb_var_screeninfo is used to describe the features of a video card
that are user defined. With fb_var_screeninfo, things such as
depth and the resolution may be defined.
</para>
<para>
The next structure is fb_fix_screeninfo. This defines the
properties of a card that are created when a mode is set and can't
be changed otherwise. A good example of this is the start of the
frame buffer memory. This "locks" the address of the frame buffer
memory, so that it cannot be changed or moved.
</para>
<para>
The last structure is fb_monospecs. In the old API, there was
little importance for fb_monospecs. This allowed for forbidden things
such as setting a mode of 800x600 on a fix frequency monitor. With
the new API, fb_monospecs prevents such things, and if used
correctly, can prevent a monitor from being cooked. fb_monospecs
will not be useful until kernels 2.5.x.
</para>
<sect1><title>Frame Buffer Memory</title>
!Edrivers/video/fbmem.c
</sect1>
<!--
<sect1><title>Frame Buffer Console</title>
X!Edrivers/video/console/fbcon.c
</sect1>
-->
<sect1><title>Frame Buffer Colormap</title>
!Edrivers/video/fbcmap.c
</sect1>
<!-- FIXME:
drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
out until somebody adds docs. KAO
<sect1><title>Frame Buffer Generic Functions</title>
X!Idrivers/video/fbgen.c
</sect1>
KAO -->
<sect1><title>Frame Buffer Video Mode Database</title>
!Idrivers/video/modedb.c
!Edrivers/video/modedb.c
</sect1>
<sect1><title>Frame Buffer Macintosh Video Mode Database</title>
!Edrivers/video/macmodes.c
</sect1>
<sect1><title>Frame Buffer Fonts</title>
<para>
Refer to the file drivers/video/console/fonts.c for more information.
</para>
<!-- FIXME: Removed for now since no structured comments in source
X!Idrivers/video/console/fonts.c
-->
</sect1>
</chapter>
<chapter id="input_subsystem">
<title>Input Subsystem</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
</chapter>
<chapter id="spi">
<title>Serial Peripheral Interface (SPI)</title>
<para>
SPI is the "Serial Peripheral Interface", widely used with
embedded systems because it is a simple and efficient
interface: basically a multiplexed shift register.
Its three signal wires hold a clock (SCK, often in the range
of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
a "Master In, Slave Out" (MISO) data line.
SPI is a full duplex protocol; for each bit shifted out the
MOSI line (one per clock) another is shifted in on the MISO line.
Those bits are assembled into words of various sizes on the
way to and from system memory.
An additional chipselect line is usually active-low (nCS);
four signals are normally used for each peripheral, plus
sometimes an interrupt.
</para>
<para>
The SPI bus facilities listed here provide a generalized
interface to declare SPI busses and devices, manage them
according to the standard Linux driver model, and perform
input/output operations.
At this time, only "master" side interfaces are supported,
where Linux talks to SPI peripherals and does not implement
such a peripheral itself.
(Interfaces to support implementing SPI slaves would
necessarily look different.)
</para>
<para>
The programming interface is structured around two kinds of driver,
and two kinds of device.
A "Controller Driver" abstracts the controller hardware, which may
be as simple as a set of GPIO pins or as complex as a pair of FIFOs
connected to dual DMA engines on the other side of the SPI shift
register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and
expose the SPI side of their device as a
<structname>struct spi_master</structname>.
SPI devices are children of that master, represented as a
<structname>struct spi_device</structname> and manufactured from
<structname>struct spi_board_info</structname> descriptors which
are usually provided by board-specific initialization code.
A <structname>struct spi_driver</structname> is called a
"Protocol Driver", and is bound to a spi_device using normal
driver model calls.
</para>
<para>
The I/O model is a set of queued messages. Protocol drivers
submit one or more <structname>struct spi_message</structname>
objects, which are processed and completed asynchronously.
(There are synchronous wrappers, however.) Messages are
built from one or more <structname>struct spi_transfer</structname>
objects, each of which wraps a full duplex SPI transfer.
A variety of protocol tweaking options are needed, because
different chips adopt very different policies for how they
use the bits transferred with SPI.
</para>
!Iinclude/linux/spi/spi.h
!Fdrivers/spi/spi.c spi_register_board_info
!Edrivers/spi/spi.c
</chapter>
<chapter id="i2c">
<title>I<superscript>2</superscript>C and SMBus Subsystem</title>
<para>
I<superscript>2</superscript>C (or without fancy typography, "I2C")
is an acronym for the "Inter-IC" bus, a simple bus protocol which is
widely used where low data rate communications suffice.
Since it's also a licensed trademark, some vendors use another
name (such as "Two-Wire Interface", TWI) for the same bus.
I2C only needs two signals (SCL for clock, SDA for data), conserving
board real estate and minimizing signal quality issues.
Most I2C devices use seven bit addresses, and bus speeds of up
to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
found wide use.
I2C is a multi-master bus; open drain signaling is used to
arbitrate between masters, as well as to handshake and to
synchronize clocks from slower clients.
</para>
<para>
The Linux I2C programming interfaces support only the master
side of bus interactions, not the slave side.
The programming interface is structured around two kinds of driver,
and two kinds of device.
An I2C "Adapter Driver" abstracts the controller hardware; it binds
to a physical device (perhaps a PCI device or platform_device) and
exposes a <structname>struct i2c_adapter</structname> representing
each I2C bus segment it manages.
On each I2C bus segment will be I2C devices represented by a
<structname>struct i2c_client</structname>. Those devices will
be bound to a <structname>struct i2c_driver</structname>,
which should follow the standard Linux driver model.
(At this writing, a legacy model is more widely used.)
There are functions to perform various I2C protocol operations; at
this writing all such functions are usable only from task context.
</para>
<para>
The System Management Bus (SMBus) is a sibling protocol. Most SMBus
systems are also I2C conformant. The electrical constraints are
tighter for SMBus, and it standardizes particular protocol messages
and idioms. Controllers that support I2C can also support most
SMBus operations, but SMBus controllers don't support all the protocol
options that an I2C controller will.
There are functions to perform various SMBus protocol operations,
either using I2C primitives or by issuing SMBus commands to
i2c_adapter devices which don't support those I2C operations.
</para>
!Iinclude/linux/i2c.h
!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
!Edrivers/i2c/i2c-core.c
</chapter>
</book>

377
Documentation/DocBook/kernel-api.tmpl
View File

@ -38,58 +38,6 @@
<toc></toc>
<chapter id="Basics">
<title>Driver Basics</title>
<sect1><title>Driver Entry and Exit points</title>
!Iinclude/linux/init.h
</sect1>
<sect1><title>Atomic and pointer manipulation</title>
!Iarch/x86/include/asm/atomic_32.h
!Iarch/x86/include/asm/unaligned.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>
!Iinclude/linux/sched.h
!Ekernel/sched.c
!Ekernel/timer.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
!Iinclude/linux/hrtimer.h
!Ekernel/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
!Ikernel/exit.c
!Ikernel/signal.c
!Iinclude/linux/kthread.h
!Ekernel/kthread.c
</sect1>
<sect1><title>Kernel objects manipulation</title>
<!--
X!Iinclude/linux/kobject.h
-->
!Elib/kobject.c
</sect1>
<sect1><title>Kernel utility functions</title>
!Iinclude/linux/kernel.h
!Ekernel/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcupdate.c
</sect1>
<sect1><title>Device Resource Management</title>
!Edrivers/base/devres.c
</sect1>
</chapter>
<chapter id="adt">
<title>Data Types</title>
<sect1><title>Doubly Linked Lists</title>
@ -298,62 +246,6 @@ X!Earch/x86/kernel/mca_32.c
!Ikernel/acct.c
</chapter>
<chapter id="devdrivers">
<title>Device drivers infrastructure</title>
<sect1><title>Device Drivers Base</title>
<!--
X!Iinclude/linux/device.h
-->
!Edrivers/base/driver.c
!Edrivers/base/core.c
!Edrivers/base/class.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
<!-- Cannot be included, because
attribute_container_add_class_device_adapter
and attribute_container_classdev_to_container
exceed allowed 44 characters maximum
X!Edrivers/base/attribute_container.c
-->
!Edrivers/base/sys.c
<!--
X!Edrivers/base/interface.c
-->
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
<sect1><title>Device Drivers Power Management</title>
!Edrivers/base/power/main.c
</sect1>
<sect1><title>Device Drivers ACPI Support</title>
<!-- Internal functions only
X!Edrivers/acpi/sleep/main.c
X!Edrivers/acpi/sleep/wakeup.c
X!Edrivers/acpi/motherboard.c
X!Edrivers/acpi/bus.c
-->
!Edrivers/acpi/scan.c
!Idrivers/acpi/scan.c
<!-- No correct structured comments
X!Edrivers/acpi/pci_bind.c
-->
</sect1>
<sect1><title>Device drivers PnP support</title>
!Idrivers/pnp/core.c
<!-- No correct structured comments
X!Edrivers/pnp/system.c
-->
!Edrivers/pnp/card.c
!Idrivers/pnp/driver.c
!Edrivers/pnp/manager.c
!Edrivers/pnp/support.c
</sect1>
<sect1><title>Userspace IO devices</title>
!Edrivers/uio/uio.c
!Iinclude/linux/uio_driver.h
</sect1>
</chapter>
<chapter id="blkdev">
<title>Block Devices</title>
!Eblock/blk-core.c
@ -381,275 +273,6 @@ X!Edrivers/pnp/system.c
!Edrivers/char/misc.c
</chapter>
<chapter id="parportdev">
<title>Parallel Port Devices</title>
!Iinclude/linux/parport.h
!Edrivers/parport/ieee1284.c
!Edrivers/parport/share.c
!Idrivers/parport/daisy.c
</chapter>
<chapter id="message_devices">
<title>Message-based devices</title>
<sect1><title>Fusion message devices</title>
!Edrivers/message/fusion/mptbase.c
!Idrivers/message/fusion/mptbase.c
!Edrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptctl.c
!Idrivers/message/fusion/mptspi.c
!Idrivers/message/fusion/mptfc.c
!Idrivers/message/fusion/mptlan.c
</sect1>
<sect1><title>I2O message devices</title>
!Iinclude/linux/i2o.h
!Idrivers/message/i2o/core.h
!Edrivers/message/i2o/iop.c
!Idrivers/message/i2o/iop.c
!Idrivers/message/i2o/config-osm.c
!Edrivers/message/i2o/exec-osm.c
!Idrivers/message/i2o/exec-osm.c
!Idrivers/message/i2o/bus-osm.c
!Edrivers/message/i2o/device.c
!Idrivers/message/i2o/device.c
!Idrivers/message/i2o/driver.c
!Idrivers/message/i2o/pci.c
!Idrivers/message/i2o/i2o_block.c
!Idrivers/message/i2o/i2o_scsi.c
!Idrivers/message/i2o/i2o_proc.c
</sect1>
</chapter>
<chapter id="snddev">
<title>Sound Devices</title>
!Iinclude/sound/core.h
!Esound/sound_core.c
!Iinclude/sound/pcm.h
!Esound/core/pcm.c
!Esound/core/device.c
!Esound/core/info.c
!Esound/core/rawmidi.c
!Esound/core/sound.c
!Esound/core/memory.c
!Esound/core/pcm_memory.c
!Esound/core/init.c
!Esound/core/isadma.c
!Esound/core/control.c
!Esound/core/pcm_lib.c
!Esound/core/hwdep.c
!Esound/core/pcm_native.c
!Esound/core/memalloc.c
<!-- FIXME: Removed for now since no structured comments in source
X!Isound/sound_firmware.c
-->
</chapter>
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Iinclude/linux/serial_core.h
!Edrivers/serial/serial_core.c
!Edrivers/serial/8250.c
</chapter>
<chapter id="fbdev">
<title>Frame Buffer Library</title>
<para>
The frame buffer drivers depend heavily on four data structures.
These structures are declared in include/linux/fb.h. They are
fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
The last three can be made available to and from userland.
</para>
<para>
fb_info defines the current state of a particular video card.
Inside fb_info, there exists a fb_ops structure which is a
collection of needed functions to make fbdev and fbcon work.
fb_info is only visible to the kernel.
</para>
<para>
fb_var_screeninfo is used to describe the features of a video card
that are user defined. With fb_var_screeninfo, things such as
depth and the resolution may be defined.
</para>
<para>
The next structure is fb_fix_screeninfo. This defines the
properties of a card that are created when a mode is set and can't
be changed otherwise. A good example of this is the start of the
frame buffer memory. This "locks" the address of the frame buffer
memory, so that it cannot be changed or moved.
</para>
<para>
The last structure is fb_monospecs. In the old API, there was
little importance for fb_monospecs. This allowed for forbidden things
such as setting a mode of 800x600 on a fix frequency monitor. With
the new API, fb_monospecs prevents such things, and if used
correctly, can prevent a monitor from being cooked. fb_monospecs
will not be useful until kernels 2.5.x.
</para>
<sect1><title>Frame Buffer Memory</title>
!Edrivers/video/fbmem.c
</sect1>
<!--
<sect1><title>Frame Buffer Console</title>
X!Edrivers/video/console/fbcon.c
</sect1>
-->
<sect1><title>Frame Buffer Colormap</title>
!Edrivers/video/fbcmap.c
</sect1>
<!-- FIXME:
drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
out until somebody adds docs. KAO
<sect1><title>Frame Buffer Generic Functions</title>
X!Idrivers/video/fbgen.c
</sect1>
KAO -->
<sect1><title>Frame Buffer Video Mode Database</title>
!Idrivers/video/modedb.c
!Edrivers/video/modedb.c
</sect1>
<sect1><title>Frame Buffer Macintosh Video Mode Database</title>
!Edrivers/video/macmodes.c
</sect1>
<sect1><title>Frame Buffer Fonts</title>
<para>
Refer to the file drivers/video/console/fonts.c for more information.
</para>
<!-- FIXME: Removed for now since no structured comments in source
X!Idrivers/video/console/fonts.c
-->
</sect1>
</chapter>
<chapter id="input_subsystem">
<title>Input Subsystem</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
</chapter>
<chapter id="spi">
<title>Serial Peripheral Interface (SPI)</title>
<para>
SPI is the "Serial Peripheral Interface", widely used with
embedded systems because it is a simple and efficient
interface: basically a multiplexed shift register.
Its three signal wires hold a clock (SCK, often in the range
of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
a "Master In, Slave Out" (MISO) data line.
SPI is a full duplex protocol; for each bit shifted out the
MOSI line (one per clock) another is shifted in on the MISO line.
Those bits are assembled into words of various sizes on the
way to and from system memory.
An additional chipselect line is usually active-low (nCS);
four signals are normally used for each peripheral, plus
sometimes an interrupt.
</para>
<para>
The SPI bus facilities listed here provide a generalized
interface to declare SPI busses and devices, manage them
according to the standard Linux driver model, and perform
input/output operations.
At this time, only "master" side interfaces are supported,
where Linux talks to SPI peripherals and does not implement
such a peripheral itself.
(Interfaces to support implementing SPI slaves would
necessarily look different.)
</para>
<para>
The programming interface is structured around two kinds of driver,
and two kinds of device.
A "Controller Driver" abstracts the controller hardware, which may
be as simple as a set of GPIO pins or as complex as a pair of FIFOs
connected to dual DMA engines on the other side of the SPI shift
register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and
expose the SPI side of their device as a
<structname>struct spi_master</structname>.
SPI devices are children of that master, represented as a
<structname>struct spi_device</structname> and manufactured from
<structname>struct spi_board_info</structname> descriptors which
are usually provided by board-specific initialization code.
A <structname>struct spi_driver</structname> is called a
"Protocol Driver", and is bound to a spi_device using normal
driver model calls.
</para>
<para>
The I/O model is a set of queued messages. Protocol drivers
submit one or more <structname>struct spi_message</structname>
objects, which are processed and completed asynchronously.
(There are synchronous wrappers, however.) Messages are
built from one or more <structname>struct spi_transfer</structname>
objects, each of which wraps a full duplex SPI transfer.
A variety of protocol tweaking options are needed, because
different chips adopt very different policies for how they
use the bits transferred with SPI.
</para>
!Iinclude/linux/spi/spi.h
!Fdrivers/spi/spi.c spi_register_board_info
!Edrivers/spi/spi.c
</chapter>
<chapter id="i2c">
<title>I<superscript>2</superscript>C and SMBus Subsystem</title>
<para>
I<superscript>2</superscript>C (or without fancy typography, "I2C")
is an acronym for the "Inter-IC" bus, a simple bus protocol which is
widely used where low data rate communications suffice.
Since it's also a licensed trademark, some vendors use another
name (such as "Two-Wire Interface", TWI) for the same bus.
I2C only needs two signals (SCL for clock, SDA for data), conserving
board real estate and minimizing signal quality issues.
Most I2C devices use seven bit addresses, and bus speeds of up
to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
found wide use.
I2C is a multi-master bus; open drain signaling is used to
arbitrate between masters, as well as to handshake and to
synchronize clocks from slower clients.
</para>
<para>
The Linux I2C programming interfaces support only the master
side of bus interactions, not the slave side.
The programming interface is structured around two kinds of driver,
and two kinds of device.
An I2C "Adapter Driver" abstracts the controller hardware; it binds
to a physical device (perhaps a PCI device or platform_device) and
exposes a <structname>struct i2c_adapter</structname> representing
each I2C bus segment it manages.
On each I2C bus segment will be I2C devices represented by a
<structname>struct i2c_client</structname>. Those devices will
be bound to a <structname>struct i2c_driver</structname>,
which should follow the standard Linux driver model.
(At this writing, a legacy model is more widely used.)
There are functions to perform various I2C protocol operations; at
this writing all such functions are usable only from task context.
</para>
<para>
The System Management Bus (SMBus) is a sibling protocol. Most SMBus
systems are also I2C conformant. The electrical constraints are
tighter for SMBus, and it standardizes particular protocol messages
and idioms. Controllers that support I2C can also support most
SMBus operations, but SMBus controllers don't support all the protocol
options that an I2C controller will.
There are functions to perform various SMBus protocol operations,
either using I2C primitives or by issuing SMBus commands to
i2c_adapter devices which don't support those I2C operations.
</para>
!Iinclude/linux/i2c.h
!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
!Edrivers/i2c/i2c-core.c
</chapter>
<chapter id="clk">
<title>Clock Framework</title>

2
Documentation/PCI/PCIEBUS-HOWTO.txt
View File

@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
int pcie_port_service_register(struct pcie_port_service_driver *new)
This API replaces the Linux Driver Model's pci_module_init API. A
This API replaces the Linux Driver Model's pci_register_driver API. A
service driver should always calls pcie_port_service_register at
module init. Note that after service driver being loaded, calls
such as pci_enable_device(dev) and pci_set_master(dev) are no longer

6
Documentation/cgroups/cgroups.txt
View File

@ -252,10 +252,8 @@ cgroup file system directories.
When a task is moved from one cgroup to another, it gets a new
css_set pointer - if there's an already existing css_set with the
desired collection of cgroups then that group is reused, else a new
css_set is allocated. Note that the current implementation uses a
linear search to locate an appropriate existing css_set, so isn't
very efficient. A future version will use a hash table for better
performance.
css_set is allocated. The appropriate existing css_set is located by
looking into a hash table.
To allow access from a cgroup to the css_sets (and hence tasks)
that comprise it, a set of cg_cgroup_link objects form a lattice;

63
Documentation/cgroups/cpusets.txt
View File

@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
- in fork and exit, to attach and detach a task from its cpuset.
- in sched_setaffinity, to mask the requested CPUs by what's
allowed in that tasks cpuset.
- in sched.c migrate_all_tasks(), to keep migrating tasks within
- in sched.c migrate_live_tasks(), to keep migrating tasks within
the CPUs allowed by their cpuset, if possible.
- in the mbind and set_mempolicy system calls, to mask the requested
Memory Nodes by what's allowed in that tasks cpuset.
@ -175,6 +175,10 @@ files describing that cpuset:
- mem_exclusive flag: is memory placement exclusive?
- mem_hardwall flag: is memory allocation hardwalled
- memory_pressure: measure of how much paging pressure in cpuset
- memory_spread_page flag: if set, spread page cache evenly on allowed nodes
- memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
- sched_load_balance flag: if set, load balance within CPUs on that cpuset
- sched_relax_domain_level: the searching range when migrating tasks
In addition, the root cpuset only has the following file:
- memory_pressure_enabled flag: compute memory_pressure?
@ -252,7 +256,7 @@ is causing.
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or re-prioritize jobs that
are trying to use more memory than allowed on the nodes assigned them,
are trying to use more memory than allowed on the nodes assigned to them,
and with tightly coupled, long running, massively parallel scientific
computing jobs that will dramatically fail to meet required performance
goals if they start to use more memory than allowed to them.
@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
The algorithmic cost of load balancing and its impact on key shared
kernel data structures such as the task list increases more than
linearly with the number of CPUs being balanced. So the scheduler
has support to partition the systems CPUs into a number of sched
has support to partition the systems CPUs into a number of sched
domains such that it only load balances within each sched domain.
Each sched domain covers some subset of the CPUs in the system;
no two sched domains overlap; some CPUs might not be in any sched
@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
The internal kernel cpuset to scheduler interface passes from the
cpuset code to the scheduler code a partition of the load balanced
CPUs in the system. This partition is a set of subsets (represented
as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
the CPUs that must be load balanced.
as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
all the CPUs that must be load balanced.
Whenever the 'sched_load_balance' flag changes, or CPUs come or go
from a cpuset with this flag enabled, or a cpuset with this flag
enabled is removed, the cpuset code builds a new such partition and
passes it to the scheduler sched domain setup code, to have the sched
domains rebuilt as necessary.
The cpuset code builds a new such partition and passes it to the
scheduler sched domain setup code, to have the sched domains rebuilt
as necessary, whenever:
- the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
- or CPUs come or go from a cpuset with this flag enabled,
- or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
and with this flag enabled changes,
- or a cpuset with non-empty CPUs and with this flag enabled is removed,
- or a cpu is offlined/onlined.
This partition exactly defines what sched domains the scheduler should
setup - one sched domain for each element (cpumask_t) in the partition.
setup - one sched domain for each element (struct cpumask) in the
partition.
The scheduler remembers the currently active sched domain partitions.
When the scheduler routine partition_sched_domains() is invoked from
@ -559,7 +568,7 @@ domain, the largest value among those is used. Be careful, if one
requests 0 and others are -1 then 0 is used.
Note that modifying this file will have both good and bad effects,
and whether it is acceptable or not will be depend on your situation.
and whether it is acceptable or not depends on your situation.
Don't modify this file if you are not sure.
If your situation is:
@ -600,19 +609,15 @@ to allocate a page of memory for that task.
If a cpuset has its 'cpus' modified, then each task in that cpuset
will have its allowed CPU placement changed immediately. Similarly,
if a tasks pid is written to a cpusets 'tasks' file, in either its
current cpuset or another cpuset, then its allowed CPU placement is
changed immediately. If such a task had been bound to some subset
of its cpuset using the sched_setaffinity() call, the task will be
allowed to run on any CPU allowed in its new cpuset, negating the
affect of the prior sched_setaffinity() call.
if a tasks pid is written to another cpusets 'tasks' file, then its
allowed CPU placement is changed immediately. If such a task had been
bound to some subset of its cpuset using the sched_setaffinity() call,
the task will be allowed to run on any CPU allowed in its new cpuset,
negating the effect of the prior sched_setaffinity() call.
In summary, the memory placement of a task whose cpuset is changed is
updated by the kernel, on the next allocation of a page for that task,
but the processor placement is not updated, until that tasks pid is
rewritten to the 'tasks' file of its cpuset. This is done to avoid
impacting the scheduler code in the kernel with a check for changes
in a tasks processor placement.
and the processor placement is updated immediately.
Normally, once a page is allocated (given a physical page
of main memory) then that page stays on whatever node it
@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
# The next line should display '/Charlie'
cat /proc/self/cpuset
In the future, a C library interface to cpusets will likely be
available. For now, the only way to query or modify cpusets is
via the cpuset file system, using the various cd, mkdir, echo, cat,
rmdir commands from the shell, or their equivalent from C.
There are ways to query or modify cpusets:
- via the cpuset file system directly, using the various cd, mkdir, echo,
cat, rmdir commands from the shell, or their equivalent from C.
- via the C library libcpuset.
- via the C library libcgroup.
(http://sourceforge.net/proects/libcg/)
- via the python application cset.
(http://developer.novell.com/wiki/index.php/Cpuset)
The sched_setaffinity calls can also be done at the shell prompt using
SGI's runon or Robert Love's taskset. The mbind and set_mempolicy
@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
is equivalent to
mount -t cgroup -ocpuset X /dev/cpuset
mount -t cgroup -ocpuset,noprefix X /dev/cpuset
echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
2.2 Adding/removing cpus

6
Documentation/connector/cn_test.c
View File

@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
memcpy(m + 1, data, m->len);
cn_netlink_send(m, 0, gfp_any());
cn_netlink_send(m, 0, GFP_ATOMIC);
kfree(m);
}
@ -160,10 +160,8 @@ static int cn_test_init(void)
goto err_out;
}
init_timer(&cn_test_timer);
cn_test_timer.function = cn_test_timer_func;
setup_timer(&cn_test_timer, cn_test_timer_func, 0);
cn_test_timer.expires = jiffies + HZ;
cn_test_timer.data = 0;
add_timer(&cn_test_timer);
return 0;

16
Documentation/cpu-freq/user-guide.txt
View File

@ -195,19 +195,3 @@ scaling_setspeed. By "echoing" a new frequency into this
you can change the speed of the CPU,
but only within the limits of
scaling_min_freq and scaling_max_freq.
3.2 Deprecated Interfaces
-------------------------
Depending on your kernel configuration, you might find the following
cpufreq-related files:
/proc/cpufreq
/proc/sys/cpu/*/speed
/proc/sys/cpu/*/speed-min
/proc/sys/cpu/*/speed-max
These are files for deprecated interfaces to cpufreq, which offer far
less functionality. Because of this, these interfaces aren't described
here.

8
Documentation/driver-model/device.txt
View File

@ -127,9 +127,11 @@ void unlock_device(struct device * dev);
Attributes
~~~~~~~~~~
struct device_attribute {
struct attribute attr;
ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
struct attribute attr;
ssize_t (*show)(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t (*store)(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
};
Attributes of devices can be exported via drivers using a simple

205
Documentation/dvb/README.flexcop
View File

@ -1,205 +0,0 @@
This README escorted the skystar2-driver rewriting procedure. It describes the
state of the new flexcop-driver set and some internals are written down here
too.
This document hopefully describes things about the flexcop and its
device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
drivers based on the skystar2.c and other information.
Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
touched and rewritten.
History & News
==============
2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
General coding processing
=========================
We should proceed as follows (as long as no one complains):
0) Think before start writing code!
1) rewriting the skystar2.c with the help of the flexcop register descriptions
and splitting up the files to a pci-bus-part and a flexcop-part.
The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
and other pci drivers)
3) make some beautification (see 'Improvements when rewriting (refactoring) is
done')
4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
a wider tester audience.
5) creating an usb-bus-part using the already written flexcop code for the pci
card.
Idea: create a kernel-object for the flexcop and export all important
functions. This option saves kernel-memory, but maybe a lot of functions have
to be exported to kernel namespace.
Current situation
=================
0) Done :)
1) Done (some minor issues left)
2) Done
3) Not ready yet, more information is necessary
4) next to be done (see the table below)
5) USB driver is working (yes, there are some minor issues)
What seems to be ready?
-----------------------
1) Rewriting
1a) i2c is cut off from the flexcop-pci.c and seems to work
1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
1e) eeprom (reading MAC address)
1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
1f) misc. register accesses for reading parameters (e.g. resetting, revision)
1g) pid/mac filter (flexcop-hw-filter.c)
1i) dvb-stuff initialization in flexcop.c (done)
1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
1j) remove flexcop initialization from flexcop-pci.c completely (done)
1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
non-static where possible, moved code to proper places)
2) Search for errors in the leftover of flexcop-pci.c (partially done)
5a) add MAC address reading
5c) feeding of ISOC data to the software demux (format of the isochronous data
and speed optimization, no real error) (thanks to Vadim Catana)
What to do in the near future?
--------------------------------------
(no special order here)
5) USB driver
5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
Testing changes
---------------
O = item is working
P = item is partially working
X = item is not working
N = item does not apply here
<empty field> = item need to be examined
| PCI | USB
item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
-------+-------+---------+---------+-------+-------+---------+---------+-------
1a) | O | | | | N | N | N | N
1b) | O | | | | | | O |
1c) | N | N | | | N | N | O |
1d) | O | O
1e) | O | O
1f) | P
1g) | O
1h) | P |
1i) | O | N
1j) | O | N
1l) | O | N
2) | O | N
5a) | N | O
5b)* | N |
5c) | N | O
* - not done yet
Known bugs and problems and TODO
--------------------------------
1g/h/l) when pid filtering is enabled on the pci card
DMA usage currently:
The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
address and triggers an IRQ when it's full and starts writing to the second
address. When the second address is full, the IRQ is triggered again, and
the flexcop writes to first address again, and so on.
The buffersize of each address is currently 640*188 bytes.
Problem is, when using hw-pid-filtering and doing some low-bandwidth
operation (like scanning) the buffers won't be filled enough to trigger
the IRQ. That's why:
When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
is triggered. Is the current write address of DMA1 different to the one
during the last IRQ, then the data is passed to the demuxer.
There is an additional DMA-IRQ-method: packet count IRQ. This isn't
implemented correctly yet.
The solution is to disable HW PID filtering, but I don't know how the DVB
API software demux behaves on slow systems with 45MBit/s TS.
Solved bugs :)
--------------
1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
working)
SOLUTION: also index 0 was affected, because net_translation is done for
these indexes by default
5b) isochronous transfer does only work in the first attempt (for the Sky2PC
USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
woke up again (don't know if this need fixes, see
flexcop-fe-tuner.c:flexcop_sleep)
NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
anything in the while the driver is loaded the first time), no transfers take
place anymore.
Improvements when rewriting (refactoring) is done
=================================================
- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
(enable sleeping for other demods than dvb-s)
- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
Debugging
---------
- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
with this flexcop, this is important, because i2c is now using the
flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
that, please tell us so).
Everything which is identical in the following table, can be put into a common
flexcop-module.
PCI USB
-------------------------------------------------------------------------------
Different:
Register access: accessing IO memory USB control message
I2C bus: I2C bus of the FC USB control message
Data transfer: DMA isochronous transfer
EEPROM transfer: through i2c bus not clear yet
Identical:
Streaming: accessing registers
PID Filtering: accessing registers
Sram destinations: accessing registers
Tuner/Demod: I2C bus
DVB-stuff: can be written for common use
Acknowledgements (just for the rewriting part)
================
Bjarne Steinsbo thought a lot in the first place of the pci part for this code
sharing idea.
Andreas Oberritter for providing a recent PCI initialization template
(pluto2.c).
Boleslaw Ciesielski for pointing out a problem with firmware loader.
Vadim Catana for correcting the USB transfer.
comments, critics and ideas to linux-dvb@linuxtv.org.

34
Documentation/dvb/technisat.txt
View File

@ -1,5 +1,5 @@
How to set up the Technisat devices
===================================
How to set up the Technisat/B2C2 Flexcop devices
================================================
1) Find out what device you have
================================
@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)...
If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
"Multimedia devices" => "Customise analog and hybrid tuner modules to build"
In this directory uncheck every driver which is activated there.
In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
Then please activate:
2a) Main module part:
a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
OR
c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
Notice: d.) is helpful for troubleshooting
2b) Frontend module part:
1.) Revision 2.3:
1.) SkyStar DVB-S Revision 2.3:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
2.) Revision 2.6:
2.) SkyStar DVB-S Revision 2.6:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
3.) Revision 2.7:
3.) SkyStar DVB-S Revision 2.7:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
4.) Revision 2.8:
4.) SkyStar DVB-S Revision 2.8:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
5.) DVB-T card:
5.) AirStar DVB-T card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
6.) DVB-C card:
6.) CableStar DVB-C card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
7.) ATSC card 1st generation:
7.) AirStar ATSC card 1st generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
8.) ATSC card 2nd generation:
8.) AirStar ATSC card 2nd generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
9.) AirStar ATSC card 3rd generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009

13
Documentation/filesystems/sysfs-pci.txt
View File

@ -9,6 +9,7 @@ that support it. For example, a given bus might look like this:
| |-- class
| |-- config
| |-- device
| |-- enable
| |-- irq
| |-- local_cpus
| |-- resource
@ -32,6 +33,7 @@ files, each with their own function.
class PCI class (ascii, ro)
config PCI config space (binary, rw)
device PCI device (ascii, ro)
enable Whether the device is enabled (ascii, rw)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
@ -57,10 +59,19 @@ used to do actual device programming from userspace. Note that some platforms
don't support mmapping of certain resources, so be sure to check the return
value from any attempted mmap.
The 'enable' file provides a counter that indicates how many times the device
has been enabled. If the 'enable' file currently returns '4', and a '1' is
echoed into it, it will then return '5'. Echoing a '0' into it will decrease
the count. Even when it returns to 0, though, some of the initialisation
may not be reversed.
The 'rom' file is special in that it provides read-only access to the device's
ROM file, if available. It's disabled by default, however, so applications
should write the string "1" to the file to enable it before attempting a read
call, and disable it following the access by writing "0" to the file.
call, and disable it following the access by writing "0" to the file. Note
that the device must be enabled for a rom read to return data succesfully.
In the event a driver is not bound to the device, it can be enabled using the
'enable' file, documented above.
Accessing legacy resources through sysfs
----------------------------------------

50
Documentation/filesystems/sysfs.txt
View File

@ -2,8 +2,10 @@
sysfs - _The_ filesystem for exporting kernel objects.
Patrick Mochel <mochel@osdl.org>
Mike Murphy <mamurph@cs.clemson.edu>
10 January 2003
Revised: 22 February 2009
Original: 10 January 2003
What it is:
@ -64,12 +66,13 @@ An attribute definition is simply:
struct attribute {
char * name;
struct module *owner;
mode_t mode;
};
int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
A bare attribute contains no means to read or write the value of the
@ -80,9 +83,11 @@ a specific object type.
For example, the driver model defines struct device_attribute like:
struct device_attribute {
struct attribute attr;
ssize_t (*show)(struct device * dev, char * buf);
ssize_t (*store)(struct device * dev, const char * buf);
struct attribute attr;
ssize_t (*show)(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t (*store)(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
};
int device_create_file(struct device *, struct device_attribute *);
@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *);
It also defines this helper for defining device attributes:
#define DEVICE_ATTR(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = { \
.attr = {.name = __stringify(_name) , .mode = _mode }, \
.show = _show, \
.store = _store, \
};
#define DEVICE_ATTR(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
For example, declaring
@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = {
.attr = {
.name = "foo",
.mode = S_IWUSR | S_IRUGO,
.show = show_foo,
.store = store_foo,
},
.show = show_foo,
.store = store_foo,
};
@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be
specified when declaring the attribute. The method types should be as
simple as those defined for device attributes:
ssize_t (*show)(struct device * dev, char * buf);
ssize_t (*store)(struct device * dev, const char * buf);
ssize_t (*show)(struct device * dev, struct device_attribute * attr,
char * buf);
ssize_t (*store)(struct device * dev, struct device_attribute * attr,
const char * buf);
IOW, they should take only an object and a buffer as parameters.
IOW, they should take only an object, an attribute, and a buffer as parameters.
sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs:
Structure:
struct device_attribute {
struct attribute attr;
ssize_t (*show)(struct device * dev, char * buf);
ssize_t (*store)(struct device * dev, const char * buf);
struct attribute attr;
ssize_t (*show)(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t (*store)(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
};
Declaring:
DEVICE_ATTR(_name, _str, _mode, _show, _store);
DEVICE_ATTR(_name, _mode, _show, _store);
Creation/Removal:
@ -342,7 +347,8 @@ Structure:
struct driver_attribute {
struct attribute attr;
ssize_t (*show)(struct device_driver *, char * buf);
ssize_t (*store)(struct device_driver *, const char * buf);
ssize_t (*store)(struct device_driver *, const char * buf,
size_t count);
};
Declaring:

101
Documentation/hwmon/hpfall.c Normal file
View File

@ -0,0 +1,101 @@
/* Disk protection for HP machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@suse.cz>
*
* GPLv2.
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <string.h>
#include <stdint.h>
#include <errno.h>
#include <signal.h>
void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
sprintf(buf, "%d", i);
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
close(fd);
}
void set_led(int on)
{
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
void protect(int seconds)
{
write_int("/sys/block/sda/device/unload_heads", seconds*1000);
}
int on_ac(void)
{
// /sys/class/power_supply/AC0/online
}
int lid_open(void)
{
// /proc/acpi/button/lid/LID/state
}
void ignore_me(void)
{
protect(0);
set_led(0);
}
int main(int argc, char* argv[])
{
int fd, ret;
fd = open("/dev/freefall", O_RDONLY);
if (fd < 0) {
perror("open");
return EXIT_FAILURE;
}
signal(SIGALRM, ignore_me);
for (;;) {
unsigned char count;
ret = read(fd, &count, sizeof(count));
alarm(0);
if ((ret == -1) && (errno == EINTR)) {
/* Alarm expired, time to unpark the heads */
continue;
}
if (ret != sizeof(count)) {
perror("read");
break;
}
protect(21);
set_led(1);
if (1 || on_ac() || lid_open()) {
alarm(2);
} else {
alarm(20);
}
}
close(fd);
return EXIT_SUCCESS;
}

8
Documentation/hwmon/lis3lv02d
View File

@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
Another feature of the driver is misc device called "freefall" that
acts similar to /dev/rtc and reacts on free-fall interrupts received
from the device. It supports blocking operations, poll/select and
fasync operation modes. You must read 1 bytes from the device. The
result is number of free-fall interrupts since the last successful
read (or 255 if number of interrupts would not fit).
Axes orientation
----------------

7
Documentation/kernel-doc-nano-HOWTO.txt
View File

@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
and any comment so marked must be in kernel-doc format. Do not use
"/**" to be begin a comment block unless the comment block contains
kernel-doc formatted comments. The closing comment marker for
kernel-doc comments can be either "*/" or "**/".
kernel-doc comments can be either "*/" or "**/", but "*/" is
preferred in the Linux kernel tree.
Kernel-doc comments should be placed just before the function
or data structure being described.
@ -63,7 +64,7 @@ Example kernel-doc function comment:
* comment lines.
*
* The longer description can have multiple paragraphs.
**/
*/
The first line, with the short description, must be on a single line.
@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
* perhaps with more lines and words.
*
* Longer description of this structure.
**/
*/
The kernel-doc function comments describe each parameter to the
function, in order, with the @name lines.

14
Documentation/kernel-parameters.txt
View File

@ -114,7 +114,7 @@ In addition, the following text indicates that the option:
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
need or coordination with <Documentation/x86/i386/boot.txt>.
need or coordination with <Documentation/x86/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
See for example <Documentation/x86/x86_64/boot-options.txt>.
@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
acpi= [HW,ACPI,X86-64,i386]
Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
Format: { force | off | ht | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler
ide-core.nodma= [HW] (E)IDE subsystem
Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
.chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
@ -937,6 +939,8 @@ and is between 256 and 4096 characters. It is defined in the file
intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option
on
Enable intel iommu driver.
off
Disable intel iommu driver.
igfx_off [Default Off]
@ -2447,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
See Documentation/x86/i386/boot.txt and
See Documentation/x86/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is

11
Documentation/scsi/cxgb3i.txt
View File

@ -4,7 +4,7 @@ Introduction
============
The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
series of products) support iSCSI acceleration and iSCSI Direct Data Placement
(DDP) where the hardware handles the expensive byte touching operations, such
as CRC computation and verification, and direct DMA to the final host memory
destination:
@ -31,9 +31,9 @@ destination:
the TCP segments onto the wire. It handles TCP retransmission if
needed.
On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
segments, separating the header and data, calculating and verifying
the digests, then forwards the header to the host. The payload data,
the digests, then forwarding the header to the host. The payload data,
if possible, will be directly placed into the pre-posted host DDP
buffer. Otherwise, the payload data will be sent to the host too.
@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator:
sure the ip address is unique in the network.
3. edit /etc/iscsi/iscsid.conf
The default setting for MaxRecvDataSegmentLength (131072) is too big,
replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
bigger than 15360 (for example 8192):
The default setting for MaxRecvDataSegmentLength (131072) is too big;
replace with a value no bigger than 15360 (for example 8192):
node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192

6
Documentation/tracers/mmiotrace.txt
View File

@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
$ cat /debug/tracing/trace_entries
$ cat /debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
$ echo 0 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/trace_entries
$ echo 1 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also

43
MAINTAINERS
View File

@ -692,6 +692,13 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/NUVOTON W90X900 ARM ARCHITECTURE
P: Wan ZongShun
M: mcuos.com@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.mcuos.com
S: Maintained
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
@ -1202,6 +1209,8 @@ S: Supported
CONTROL GROUPS (CGROUPS)
P: Paul Menage
M: menage@google.com
P: Li Zefan
M: lizf@cn.fujitsu.com
L: containers@lists.linux-foundation.org
S: Maintained
@ -1903,10 +1912,10 @@ W: http://gigaset307x.sourceforge.net/
S: Maintained
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Robert Love
M: rlove@rlove.org
M: linux-kernel@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
P: Frank Seidel
M: frank@f-seidel.de
L: lm-sensors@lm-sensors.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
GSPCA FINEPIX SUBDRIVER
@ -1999,7 +2008,7 @@ S: Maintained
HIBERNATION (aka Software Suspend, aka swsusp)
P: Pavel Machek
M: pavel@suse.cz
M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@ -2455,7 +2464,7 @@ S: Maintained
ISDN SUBSYSTEM
P: Karsten Keil
M: kkeil@suse.de
M: isdn@linux-pingi.de
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
@ -3325,8 +3334,8 @@ P: Jeremy Fitzhardinge
M: jeremy@xensource.com
P: Chris Wright
M: chrisw@sous-sol.org
P: Zachary Amsden
M: zach@vmware.com
P: Alok Kataria
M: akataria@vmware.com
P: Rusty Russell
M: rusty@rustcorp.com.au
L: virtualization@lists.osdl.org
@ -3537,6 +3546,12 @@ S: Maintained
PXA MMCI DRIVER
S: Orphan
PXA RTC DRIVER
P: Robert Jarzmik
M: robert.jarzmik@free.fr
L: rtc-linux@googlegroups.com
S: Maintained
QLOGIC QLA2XXX FC-SCSI DRIVER
P: Andrew Vasquez
M: linux-driver@qlogic.com
@ -4164,7 +4179,7 @@ SUSPEND TO RAM
P: Len Brown
M: len.brown@intel.com
P: Pavel Machek
M: pavel@suse.cz
M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@ -4285,8 +4300,8 @@ P: Rajiv Andrade
M: srajiv@linux.vnet.ibm.com
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
M: tpm@selhorst.net
W: http://www.prosec.rub.de/tpm/
M: m.selhorst@sirrix.com
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
@ -4916,11 +4931,11 @@ L: zd1211-devs@lists.sourceforge.net (subscribers-only)
S: Maintained
ZR36067 VIDEO FOR LINUX DRIVER
P: Ronald Bultje
M: rbultje@ronald.bitfreak.net
L: mjpeg-users@lists.sourceforge.net
L: linux-media@vger.kernel.org
W: http://mjpeg.sourceforge.net/driver-zoran/
S: Maintained
T: Mercurial http://linuxtv.org/hg/v4l-dvb
S: Odd Fixes
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki

4
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
EXTRAVERSION = -rc3
EXTRAVERSION = -rc7
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
@ -389,6 +389,7 @@ PHONY += outputmakefile
# output directory.
outputmakefile:
ifneq ($(KBUILD_SRC),)
$(Q)ln -fsn $(srctree) source
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),)
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
ln -fsn $(srctree) source
endif
# prepare2 creates a makefile if using a separate output directory

2
README
View File

@ -188,7 +188,7 @@ CONFIGURING the kernel:
values to random values.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/make-configs.txt.
in Documentation/kbuild/kconfig.txt.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can

8
arch/alpha/kernel/process.c
View File

@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
cpu_clear(cpuid, cpu_present_map);
cpu_clear(cpuid, cpu_possible_map);
set_cpu_present(cpuid, false);
set_cpu_possible(cpuid, false);
halt();
}
#endif
@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
cpu_clear(boot_cpuid, cpu_present_map);
cpu_clear(boot_cpuid, cpu_possible_map);
set_cpu_present(boot_cpuid, false);
set_cpu_possible(boot_cpuid, false);
while (cpus_weight(cpu_present_map))
barrier();
#endif

12
arch/alpha/kernel/smp.c
View File

@ -120,12 +120,12 @@ void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
cpumask_t mask = cpu_online_map;
if (cpu_test_and_set(cpuid, mask)) {
if (cpu_online(cpuid)) {
printk("??, cpu 0x%x already present??\n", cpuid);
BUG();
}
set_cpu_online(cpuid, true);
/* Turn on machine checks. */
wrmces(7);
@ -436,8 +436,8 @@ setup_smp(void)
((char *)cpubase + i*hwrpb->processor_size);
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
cpu_set(i, cpu_possible_map);
cpu_set(i, cpu_present_map);
set_cpu_possible(i, true);
set_cpu_present(i, true);
cpu->pal_revision = boot_cpu_palrev;
}
@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
cpu_possible_map = cpumask_of_cpu(boot_cpuid);
cpu_present_map = cpumask_of_cpu(boot_cpuid);
init_cpu_possible(cpumask_of(boot_cpuid));
init_cpu_present(cpumask_of(boot_cpuid));
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}

2
arch/arm/configs/at91sam9260ek_defconfig
View File

@ -608,7 +608,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards

2
arch/arm/configs/at91sam9261ek_defconfig
View File

@ -700,7 +700,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards

2
arch/arm/configs/at91sam9263ek_defconfig
View File

@ -710,7 +710,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards

2
arch/arm/configs/at91sam9rlek_defconfig
View File

@ -606,7 +606,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT91SAM9_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
#
# Sonics Silicon Backplane

2
arch/arm/configs/qil-a9260_defconfig
View File

@ -727,7 +727,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_AT91SAM9_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
#
# USB-based Watchdog Cards

4
arch/arm/kernel/elf.c
View File

@ -74,9 +74,9 @@ EXPORT_SYMBOL(elf_set_personality);
*/
int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
{
if (executable_stack != EXSTACK_ENABLE_X)
if (executable_stack != EXSTACK_DISABLE_X)
return 1;
if (cpu_architecture() <= CPU_ARCH_ARMv6)
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
return 0;
}

4
arch/arm/kernel/machine_kexec.c
View File

@ -13,8 +13,8 @@
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
const extern unsigned char relocate_new_kernel[];
const extern unsigned int relocate_new_kernel_size;
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
extern void setup_mm_for_reboot(char mode);

13
arch/arm/kernel/setup.c
View File

@ -233,12 +233,13 @@ static void __init cacheid_init(void)
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
if (arch >= CPU_ARCH_ARMv7) {
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (arch >= CPU_ARCH_ARMv6) {
if (cachetype & (1 << 23))
if (arch >= CPU_ARCH_ARMv6) {
if ((cachetype & (7 << 29)) == 4 << 29) {
/* ARMv7 register format */
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;

2
arch/arm/mach-at91/at91cap9_devices.c
View File

@ -697,7 +697,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91cap9_wdt_device = {
.name = "at91_wdt",
.id = -1,

2
arch/arm/mach-at91/at91sam9260_devices.c
View File

@ -643,7 +643,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9260_wdt_device = {
.name = "at91_wdt",
.id = -1,

2
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -621,7 +621,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9261_wdt_device = {
.name = "at91_wdt",
.id = -1,

2
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -854,7 +854,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9263_wdt_device = {
.name = "at91_wdt",
.id = -1,

2
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -609,7 +609,7 @@ static void __init at91_add_device_rtt(void)
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,

15
arch/arm/mach-at91/gpio.c
View File

@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init);
/*--------------------------------------------------------------------------*/
/* This lock class tells lockdep that GPIO irqs are in a different
/*
* This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
@ -509,9 +510,6 @@ void __init at91_gpio_irq_setup(void)
unsigned id = this->id;
unsigned i;
/* enable PIO controller's clock */
clk_enable(this->clock);
__raw_writel(~0, this->regbase + PIO_IDR);
for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
@ -556,7 +554,14 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
data->chipbase = PIN_BASE + i * 32;
data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
/* enable PIO controller's clock */
clk_enable(data->clock);
/*
* Some processors share peripheral ID between multiple GPIO banks.
* SAM9263 (PIOC, PIOD, PIOE)
* CAP9 (PIOA, PIOB, PIOC, PIOD)
*/
if (last && last->id == data->id)
last->next = data;
}

1
arch/arm/mach-at91/include/mach/board.h
View File

@ -93,6 +93,7 @@ struct atmel_nand_data {
u8 enable_pin; /* chip enable */
u8 det_pin; /* card detect */
u8 rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */

1
arch/arm/mach-at91/pm.c
View File

@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state)
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();

6
arch/arm/mach-davinci/board-evm.c
View File

@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
setup_usb(500, 8);
return 0;
}
@ -417,9 +420,6 @@ static __init void davinci_evm_init(void)
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
setup_usb(500, 8);
}
static __init void davinci_evm_irq_init(void)

5
arch/arm/mach-davinci/clock.c
View File

@ -230,6 +230,11 @@ static struct clk davinci_clks[] = {
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_GPIO,
},
{
.name = "usb",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_USB,
},
{
.name = "AEMIFCLK",
.rate = &commonrate,

1
arch/arm/mach-davinci/usb.c
View File

@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = {
#elif defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
#endif
.clock = "usb",
.config = &musb_config,
};

3
arch/arm/mach-ep93xx/include/mach/gesbc9312.h
View File

@ -1,3 +0,0 @@
/*
* arch/arm/mach-ep93xx/include/mach/gesbc9312.h
*/

1
arch/arm/mach-ep93xx/include/mach/hardware.h
View File

@ -10,7 +10,6 @@
#include "platform.h"
#include "gesbc9312.h"
#include "ts72xx.h"
#endif

2
arch/arm/mach-kirkwood/irq.c
View File

@ -42,7 +42,7 @@ void __init kirkwood_init_irq(void)
writel(0, GPIO_EDGE_CAUSE(32));
for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_level_chip);
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);

2
arch/arm/mach-mv78xx0/irq.c
View File

@ -40,7 +40,7 @@ void __init mv78xx0_init_irq(void)
writel(0, GPIO_EDGE_CAUSE(0));
for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_level_chip);
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);

16
arch/arm/mach-omap2/clock.c
View File

@ -565,7 +565,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
*
* Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
* find the corresponding register field value. The return register value is
* the value before left-shifting. Returns 0xffffffff on error
* the value before left-shifting. Returns ~0 on error
*/
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
{
@ -577,7 +577,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
clks = omap2_get_clksel_by_parent(clk, clk->parent);
if (clks == NULL)
return 0;
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
if ((clkr->flags & cpu_mask) && (clkr->div == div))
@ -588,7 +588,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
printk(KERN_ERR "clock: Could not find divisor %d for "
"clock %s parent %s\n", div, clk->name,
clk->parent->name);
return 0;
return ~0;
}
return clkr->val;
@ -708,7 +708,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
if (clkr->flags & (cpu_mask | DEFAULT_RATE))
if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
break; /* Found the default rate for this platform */
}
@ -746,7 +746,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
return -EINVAL;
if (clk->usecount > 0)
_omap2_clk_disable(clk);
omap2_clk_disable(clk);
/* Set new source value (previous dividers if any in effect) */
reg_val = __raw_readl(src_addr) & ~field_mask;
@ -759,11 +759,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
wmb();
}
if (clk->usecount > 0)
_omap2_clk_enable(clk);
clk->parent = new_parent;
if (clk->usecount > 0)
omap2_clk_enable(clk);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;

2
arch/arm/mach-orion5x/irq.c
View File

@ -44,7 +44,7 @@ void __init orion5x_init_irq(void)
* User can use set_type() if he wants to use edge types handlers.
*/
for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_level_chip);
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);

18
arch/arm/mach-pxa/dma.c
View File

@ -121,6 +121,16 @@ int __init pxa_init_dma(int num_ch)
if (dma_channels == NULL)
return -ENOMEM;
/* dma channel priorities on pxa2xx processors:
* ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
* ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
* ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
*/
for (i = 0; i < num_ch; i++) {
DCSR(i) = 0;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
}
ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
@ -128,14 +138,6 @@ int __init pxa_init_dma(int num_ch)
return ret;
}
/* dma channel priorities on pxa2xx processors:
* ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
* ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
* ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
*/
for (i = 0; i < num_ch; i++)
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
num_dma_channels = num_ch;
return 0;
}

2
arch/arm/mach-pxa/include/mach/regs-ac97.h
View File

@ -1,6 +1,8 @@
#ifndef __ASM_ARCH_REGS_AC97_H
#define __ASM_ARCH_REGS_AC97_H
#include <mach/hardware.h>
/*
* AC97 Controller registers
*/

3
arch/arm/mach-pxa/include/mach/regs-ssp.h
View File

@ -41,6 +41,9 @@
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
#endif
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_EDSS (1 << 20) /* Extended data size select */
#define SSCR0_NCS (1 << 21) /* Network clock select */
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */

4
arch/arm/mach-pxa/pxa300.c
View File

@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
static struct clk_lookup common_clkregs[] = {
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
};
static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
static struct clk_lookup pxa310_clkregs[] = {
INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
};
static int __init pxa300_init(void)

2
arch/arm/mach-pxa/pxa320.c
View File

@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
static struct clk_lookup pxa320_clkregs[] = {
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
};
static int __init pxa320_init(void)

6
arch/arm/mach-rpc/riscpc.c
View File

@ -19,6 +19,7 @@
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <asm/elf.h>
#include <asm/mach-types.h>
@ -201,8 +202,13 @@ static struct platform_device *devs[] __initdata = {
&pata_device,
};
static struct i2c_board_info i2c_rtc = {
I2C_BOARD_INFO("pcf8583", 0x50)
};
static int __init rpc_init(void)
{
i2c_register_board_info(0, &i2c_rtc, 1);
return platform_add_devices(devs, ARRAY_SIZE(devs));
}

3
arch/arm/mm/abort-ev6.S
View File

@ -23,7 +23,8 @@ ENTRY(v6_early_abort)
#ifdef CONFIG_CPU_32v6K
clrex
#else
strex r0, r1, [sp] @ Clear the exclusive monitor
sub r1, sp, #4 @ Get unused stack location
strex r0, r1, [r1] @ Clear the exclusive monitor
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR

3
arch/arm/mm/mmu.c
View File

@ -693,7 +693,8 @@ static void __init sanity_check_meminfo(void)
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
if (__va(bank->start) >= VMALLOC_MIN) {
if (__va(bank->start) >= VMALLOC_MIN ||
__va(bank->start) < PAGE_OFFSET) {
printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
"(vmalloc region overlap).\n",
bank->start, bank->start + bank->size - 1);

75
arch/arm/plat-orion/gpio.c
View File

@ -265,51 +265,36 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
* polarity LEVEL mask
*
****************************************************************************/
static void gpio_irq_edge_ack(u32 irq)
{
int pin = irq_to_gpio(irq);
writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
static void gpio_irq_ack(u32 irq)
{
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
int pin = irq_to_gpio(irq);
writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
}
}
static void gpio_irq_edge_mask(u32 irq)
static void gpio_irq_mask(u32 irq)
{
int pin = irq_to_gpio(irq);
u32 u;
u = readl(GPIO_EDGE_MASK(pin));
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
u32 u = readl(reg);
u &= ~(1 << (pin & 31));
writel(u, GPIO_EDGE_MASK(pin));
writel(u, reg);
}
static void gpio_irq_edge_unmask(u32 irq)
static void gpio_irq_unmask(u32 irq)
{
int pin = irq_to_gpio(irq);
u32 u;
u = readl(GPIO_EDGE_MASK(pin));
int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
u32 u = readl(reg);
u |= 1 << (pin & 31);
writel(u, GPIO_EDGE_MASK(pin));
}
static void gpio_irq_level_mask(u32 irq)
{
int pin = irq_to_gpio(irq);
u32 u;
u = readl(GPIO_LEVEL_MASK(pin));
u &= ~(1 << (pin & 31));
writel(u, GPIO_LEVEL_MASK(pin));
}
static void gpio_irq_level_unmask(u32 irq)
{
int pin = irq_to_gpio(irq);
u32 u;
u = readl(GPIO_LEVEL_MASK(pin));
u |= 1 << (pin & 31);
writel(u, GPIO_LEVEL_MASK(pin));
writel(u, reg);
}
static int gpio_irq_set_type(u32 irq, u32 type)
@ -331,9 +316,9 @@ static int gpio_irq_set_type(u32 irq, u32 type)
* Set edge/level type.
*/
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
desc->chip = &orion_gpio_irq_edge_chip;
desc->handle_irq = handle_edge_irq;
} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
desc->chip = &orion_gpio_irq_level_chip;
desc->handle_irq = handle_level_irq;
} else {
printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
return -EINVAL;
@ -371,19 +356,11 @@ static int gpio_irq_set_type(u32 irq, u32 type)
return 0;
}
struct irq_chip orion_gpio_irq_edge_chip = {
.name = "orion_gpio_irq_edge",
.ack = gpio_irq_edge_ack,
.mask = gpio_irq_edge_mask,
.unmask = gpio_irq_edge_unmask,
.set_type = gpio_irq_set_type,
};
struct irq_chip orion_gpio_irq_level_chip = {
.name = "orion_gpio_irq_level",
.mask = gpio_irq_level_mask,
.mask_ack = gpio_irq_level_mask,
.unmask = gpio_irq_level_unmask,
struct irq_chip orion_gpio_irq_chip = {
.name = "orion_gpio",
.ack = gpio_irq_ack,
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
.set_type = gpio_irq_set_type,
};

3
arch/arm/plat-orion/include/plat/gpio.h
View File

@ -31,8 +31,7 @@ void orion_gpio_set_blink(unsigned pin, int blink);
/*
* GPIO interrupt handling.
*/
extern struct irq_chip orion_gpio_irq_edge_chip;
extern struct irq_chip orion_gpio_irq_level_chip;
extern struct irq_chip orion_gpio_irq_chip;
void orion_gpio_irq_handler(int irqoff);

2
arch/arm/plat-s3c64xx/irq-eint.c
View File

@ -55,7 +55,7 @@ static void s3c_irq_eint_unmask(unsigned int irq)
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
mask |= eint_irq_to_bit(irq);
mask &= ~eint_irq_to_bit(irq);
__raw_writel(mask, S3C64XX_EINT0MASK);
}

1
arch/avr32/mach-at32ap/include/mach/board.h
View File

@ -116,6 +116,7 @@ struct atmel_nand_data {
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */

2
arch/frv/mm/dma-alloc.c
View File

@ -36,10 +36,10 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/hardirq.h>
#include <asm/pgalloc.h>
#include <asm/io.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>

18
arch/ia64/Kconfig
View File

@ -221,7 +221,11 @@ config IA64_HP_SIM
config IA64_XEN_GUEST
bool "Xen guest"
select SWIOTLB
depends on XEN
help
Build a kernel that runs on Xen guest domain. At this moment only
16KB page size in supported.
endchoice
@ -479,8 +483,7 @@ config HOLES_IN_ZONE
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool y
depends on NEED_MULTIPLE_NODES
def_bool NUMA && SPARSEMEM
config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
@ -635,6 +638,17 @@ config DMAR
and include PCI device scope covered by these DMA
remapping devices.
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel. It is
recommended you say N here while the DMAR code remains
experimental.
endmenu
endif

1601
arch/ia64/configs/xen_domu_defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

4
arch/ia64/include/asm/kvm.h
View File

@ -25,6 +25,10 @@
#include <linux/ioctl.h>
/* Select x86 specific features in <linux/kvm.h> */
#define __KVM_HAVE_IOAPIC
#define __KVM_HAVE_DEVICE_ASSIGNMENT
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256

4
arch/ia64/include/asm/mmzone.h
View File

@ -31,10 +31,6 @@ static inline int pfn_to_nid(unsigned long pfn)
#endif
}
#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
extern int early_pfn_to_nid(unsigned long pfn);
#endif
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)

2
arch/ia64/include/asm/sn/bte.h
View File

@ -39,7 +39,7 @@
/* BTE status register only supports 16 bits for length field */
#define BTE_LEN_BITS (16)
#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
/* Define hardware */

2
arch/ia64/kernel/iosapic.c
View File

@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol)
if (trigger == IOSAPIC_EDGE)
return -EINVAL;
for (i = 0; i <= NR_IRQS; i++) {
for (i = 0; i < NR_IRQS; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
(info->dmode == IOSAPIC_FIXED ||

5
arch/ia64/kernel/smpboot.c
View File

@ -736,14 +736,15 @@ int __cpu_disable(void)
return -EBUSY;
}
cpu_clear(cpu, cpu_online_map);
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
return -EBUSY;
}
remove_siblinginfo(cpu);
fixup_irqs();
cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;

2
arch/ia64/kernel/unwind.c
View File

@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle)
/* next, remove hash table entries for this table */
for (index = 0; index <= UNW_HASH_SIZE; ++index) {
for (index = 0; index < UNW_HASH_SIZE; ++index) {
tmp = unw.cache + unw.hash[index];
if (unw.hash[index] >= UNW_CACHE_SIZE
|| tmp->ip < table->start || tmp->ip >= table->end)

4
arch/ia64/kvm/kvm-ia64.c
View File

@ -1337,6 +1337,10 @@ static void kvm_release_vm_pages(struct kvm *kvm)
}
}
void kvm_arch_sync_events(struct kvm *kvm)
{
}
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_iommu_unmap_guest(kvm);

17
arch/ia64/kvm/process.c
View File

@ -455,13 +455,18 @@ fpswa_ret_t vmm_fp_emulate(int fp_fault, void *bundle, unsigned long *ipsr,
if (!vmm_fpswa_interface)
return (fpswa_ret_t) {-1, 0, 0, 0};
/*
* Just let fpswa driver to use hardware fp registers.
* No fp register is valid in memory.
*/
memset(&fp_state, 0, sizeof(fp_state_t));
/*
* compute fp_state. only FP registers f6 - f11 are used by the
* vmm, so set those bits in the mask and set the low volatile
* pointer to point to these registers.
*/
fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */
fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
/*
* unsigned long (*EFI_FPSWA) (
* unsigned long trap_type,
* void *Bundle,
@ -545,10 +550,6 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
status = vmm_handle_fpu_swa(0, regs, isr);
if (!status)
return ;
else if (-EAGAIN == status) {
vcpu_decrement_iip(vcpu);
return ;
}
break;
}

4
arch/ia64/mm/numa.c
View File

@ -58,7 +58,7 @@ paddr_to_nid(unsigned long paddr)
* SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
* the section resides.
*/
int early_pfn_to_nid(unsigned long pfn)
int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
@ -70,7 +70,7 @@ int early_pfn_to_nid(unsigned long pfn)
return node_memblk[i].nid;
}
return 0;
return -1;
}
#ifdef CONFIG_MEMORY_HOTPLUG

7
arch/ia64/sn/kernel/bte.c
View File

@ -97,9 +97,10 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
return BTE_SUCCESS;
}
BUG_ON((len & L1_CACHE_MASK) ||
(src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
BUG_ON(len & L1_CACHE_MASK);
BUG_ON(src & L1_CACHE_MASK);
BUG_ON(dest & L1_CACHE_MASK);
BUG_ON(len > BTE_MAX_XFER);
/*
* Start with interface corresponding to cpu number

2
arch/ia64/sn/kernel/io_acpi_init.c
View File

@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
size = pci_resource_len(dev, PCI_ROM_RESOURCE);
addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
size);
image_size = pci_get_rom_size(addr, size);
image_size = pci_get_rom_size(dev, addr, size);
dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
dev->resource[PCI_ROM_RESOURCE].end =
(unsigned long) addr + image_size - 1;

2
arch/ia64/sn/kernel/io_init.c
View File

@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev)
rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
size + 1);
image_size = pci_get_rom_size(rom, size + 1);
image_size = pci_get_rom_size(dev, rom, size + 1);
dev->resource[PCI_ROM_RESOURCE].end =
dev->resource[PCI_ROM_RESOURCE].start +
image_size - 1;

3
arch/ia64/xen/Kconfig
View File

@ -8,8 +8,7 @@ config XEN
depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
select XEN_XENCOMM
select NO_IDLE_HZ
# those are required to save/restore.
# followings are required to save/restore.
select ARCH_SUSPEND_POSSIBLE
select SUSPEND
select PM_SLEEP

4
arch/ia64/xen/xen_pv_ops.c
View File

@ -153,7 +153,7 @@ xen_post_smp_prepare_boot_cpu(void)
xen_setup_vcpu_info_placement();
}
static const struct pv_init_ops xen_init_ops __initdata = {
static const struct pv_init_ops xen_init_ops __initconst = {
.banner = xen_banner,
.reserve_memory = xen_reserve_memory,
@ -337,7 +337,7 @@ xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
}
static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
static const struct pv_iosapic_ops xen_iosapic_ops __initconst = {
.pcat_compat_init = xen_pcat_compat_init,
.__get_irq_chip = xen_iosapic_get_irq_chip,

16
arch/m68k/atari/ataints.c
View File

@ -187,8 +187,8 @@ __asm__ (__ALIGN_STR "\n" \
" jbra ret_from_interrupt\n" \
: : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \
"n" (PT_OFF_SR), "n" (n), \
"i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a) \
: (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)), \
"i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \
: (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
"m" (preempt_count()), "di" (HARDIRQ_OFFSET) \
); \
for (;;); /* fake noreturn */ \
@ -366,14 +366,14 @@ void __init atari_init_IRQ(void)
/* Initialize the MFP(s) */
#ifdef ATARI_USE_SOFTWARE_EOI
mfp.vec_adr = 0x48; /* Software EOI-Mode */
st_mfp.vec_adr = 0x48; /* Software EOI-Mode */
#else
mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
st_mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
#endif
mfp.int_en_a = 0x00; /* turn off MFP-Ints */
mfp.int_en_b = 0x00;
mfp.int_mk_a = 0xff; /* no Masking */
mfp.int_mk_b = 0xff;
st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
st_mfp.int_en_b = 0x00;
st_mfp.int_mk_a = 0xff; /* no Masking */
st_mfp.int_mk_b = 0xff;
if (ATARIHW_PRESENT(TT_MFP)) {
#ifdef ATARI_USE_SOFTWARE_EOI

4
arch/m68k/atari/atakeyb.c
View File

@ -609,10 +609,10 @@ int atari_keyb_init(void)
ACIA_RHTID : 0);
/* make sure the interrupt line is up */
} while ((mfp.par_dt_reg & 0x10) == 0);
} while ((st_mfp.par_dt_reg & 0x10) == 0);
/* enable ACIA Interrupts */
mfp.active_edge &= ~0x10;
st_mfp.active_edge &= ~0x10;
atari_turnon_irq(IRQ_MFP_ACIA);
ikbd_self_test = 1;

2
arch/m68k/atari/config.c
View File

@ -258,7 +258,7 @@ void __init config_atari(void)
printk("STND_SHIFTER ");
}
}
if (hwreg_present(&mfp.par_dt_reg)) {
if (hwreg_present(&st_mfp.par_dt_reg)) {
ATARIHW_SET(ST_MFP);
printk("ST_MFP ");
}

22
arch/m68k/atari/debug.c
View File

@ -34,9 +34,9 @@ static struct console atari_console_driver = {
static inline void ata_mfp_out(char c)
{
while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
while (!(st_mfp.trn_stat & 0x80)) /* wait for tx buf empty */
barrier();
mfp.usart_dta = c;
st_mfp.usart_dta = c;
}
static void atari_mfp_console_write(struct console *co, const char *str,
@ -91,7 +91,7 @@ static int ata_par_out(char c)
/* This a some-seconds timeout in case no printer is connected */
unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
;
if (!i)
return 0;
@ -131,9 +131,9 @@ static void atari_par_console_write(struct console *co, const char *str,
#if 0
int atari_mfp_console_wait_key(struct console *co)
{
while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
while (!(st_mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
barrier();
return mfp.usart_dta;
return st_mfp.usart_dta;
}
int atari_scc_console_wait_key(struct console *co)
@ -175,12 +175,12 @@ static void __init atari_init_mfp_port(int cflag)
baud = B9600; /* use default 9600bps for non-implemented rates */
baud -= B1200; /* baud_table[] starts at 1200bps */
mfp.trn_stat &= ~0x01; /* disable TX */
mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
mfp.tim_ct_cd &= 0x70; /* stop timer D */
mfp.tim_dt_d = baud_table[baud];
mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
mfp.trn_stat |= 0x01; /* enable TX */
st_mfp.trn_stat &= ~0x01; /* disable TX */
st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
st_mfp.tim_ct_cd &= 0x70; /* stop timer D */
st_mfp.tim_dt_d = baud_table[baud];
st_mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
st_mfp.trn_stat |= 0x01; /* enable TX */
}
#define SCC_WRITE(reg, val) \

8
arch/m68k/atari/time.c
View File

@ -27,9 +27,9 @@ void __init
atari_sched_init(irq_handler_t timer_routine)
{
/* set Timer C data Register */
mfp.tim_dt_c = INT_TICKS;
st_mfp.tim_dt_c = INT_TICKS;
/* start timer C, div = 1:100 */
mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
/* install interrupt service routine for MFP Timer C */
if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
"timer", timer_routine))
@ -46,11 +46,11 @@ unsigned long atari_gettimeoffset (void)
unsigned long ticks, offset = 0;
/* read MFP timer C current value */
ticks = mfp.tim_dt_c;
ticks = st_mfp.tim_dt_c;
/* The probability of underflow is less than 2% */
if (ticks > INT_TICKS - INT_TICKS / 50)
/* Check for pending timer interrupt */
if (mfp.int_pn_b & (1 << 5))
if (st_mfp.int_pn_b & (1 << 5))
offset = TICK_SIZE;
ticks = INT_TICKS - ticks;

4
arch/m68k/include/asm/atarihw.h
View File

@ -113,7 +113,7 @@ extern struct atari_hw_present atari_hw_present;
* of nops on various machines. Somebody claimed that the tstb takes 600 ns.
*/
#define MFPDELAY() \
__asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
__asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" );
/* Do cache push/invalidate for DMA read/write. This function obeys the
* snooping on some machines (Medusa) and processors: The Medusa itself can
@ -565,7 +565,7 @@ struct MFP
u_char char_dummy23;
u_char usart_dta;
};
# define mfp ((*(volatile struct MFP*)MFP_BAS))
# define st_mfp ((*(volatile struct MFP*)MFP_BAS))
/* TT's second MFP */

6
arch/m68k/include/asm/atariints.h
View File

@ -113,7 +113,7 @@ static inline int get_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
reg = (unsigned char *)&mfp.int_en_a + type*4 +
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
return( *reg & mask );
}
@ -123,7 +123,7 @@ static inline void set_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
reg = (unsigned char *)&mfp.int_en_a + type*4 +
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
__asm__ __volatile__ ( "orb %0,%1"
: : "di" (mask), "m" (*reg) : "memory" );
@ -134,7 +134,7 @@ static inline void clear_mfp_bit( unsigned irq, int type )
{ unsigned char mask, *reg;
mask = ~(1 << (irq & 7));
reg = (unsigned char *)&mfp.int_en_a + type*4 +
reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
if (type == MFP_PENDING || type == MFP_SERVICE)
__asm__ __volatile__ ( "moveb %0,%1"

9
arch/mips/Kconfig
View File

@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select CPU_CAVIUM_OCTEON
select SYS_HAS_CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
select CPU_CAVIUM_OCTEON
select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
help
This option supports all of the Octeon reference boards from Cavium
@ -1234,6 +1234,7 @@ config CPU_SB1
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
select IRQ_CPU
select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000
config SYS_HAS_CPU_SB1
bool
config SYS_HAS_CPU_CAVIUM_OCTEON
bool
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@ -1387,6 +1391,7 @@ config 32BIT
config 64BIT
bool "64-bit kernel"
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
select HAVE_SYSCALL_WRAPPERS
help
Select this option if you want to build a 64-bit kernel.

6
arch/mips/alchemy/common/time.c
View File

@ -118,7 +118,7 @@ void __init plat_time_init(void)
* setup counter 1 (RTC) to tick at full speed
*/
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
@ -127,7 +127,7 @@ void __init plat_time_init(void)
au_sync();
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
@ -135,7 +135,7 @@ void __init plat_time_init(void)
au_sync();
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;

1
arch/mips/include/asm/seccomp.h
View File

@ -1,6 +1,5 @@
#ifndef __ASM_SECCOMP_H
#include <linux/thread_info.h>
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read

1
arch/mips/include/asm/spinlock.h
View File

@ -51,6 +51,7 @@ static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
return (((counters >> 14) - counters) & 0x1fff) > 1;
}
#define __raw_spin_is_contended __raw_spin_is_contended
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{

1
arch/mips/kernel/irq.c
View File

@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v)
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
seq_printf(p, " %14s", irq_desc[i].chip->name);
seq_printf(p, "-%-8s", irq_desc[i].name);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)

69
arch/mips/kernel/linux32.c
View File

@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/binfmts.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ipc.h>
@ -63,9 +64,9 @@
#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
#endif
asmlinkage unsigned long
sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
unsigned long flags, unsigned long fd, unsigned long pgoff)
SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags, unsigned long, fd,
unsigned long, pgoff)
{
struct file * file = NULL;
unsigned long error;
@ -121,21 +122,21 @@ struct rlimit32 {
int rlim_max;
};
asmlinkage long sys32_truncate64(const char __user * path,
unsigned long __dummy, int a2, int a3)
SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
{
return sys_truncate(path, merge_64(a2, a3));
}
asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
int a2, int a3)
SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
unsigned long, a2, unsigned long, a3)
{
return sys_ftruncate(fd, merge_64(a2, a3));
}
asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
unsigned int offset_low, loff_t __user * result,
unsigned int origin)
SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
unsigned long, offset_low, loff_t __user *, result,
unsigned long, origin)
{
return sys_llseek(fd, offset_high, offset_low, result, origin);
}
@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
lseek back to original location. They fail just like lseek does on
non-seekable files. */
asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
size_t count, u32 unused, u64 a4, u64 a5)
SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
unsigned long, unused, unsigned long, a4, unsigned long, a5)
{
return sys_pread64(fd, buf, count, merge_64(a4, a5));
}
asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
size_t count, u32 unused, u64 a4, u64 a5)
SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
size_t, count, u32, unused, u64, a4, u64, a5)
{
return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
}
asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
struct compat_timespec __user *interval)
SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
struct compat_timespec __user *, interval)
{
struct timespec t;
int ret;
@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
#ifdef CONFIG_SYSVIPC
asmlinkage long
sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
unsigned long, ptr, unsigned long, fifth)
{
int version, err;
@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
#else
asmlinkage long
sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
u32, ptr, u32 fifth)
{
return -ENOSYS;
}
@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
#endif /* CONFIG_SYSVIPC */
#ifdef CONFIG_MIPS32_N32
asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
{
/* compat_sys_semctl expects a pointer to union semun */
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
return compat_sys_semctl(semid, semnum, cmd, uptr);
}
asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
int, msgflg)
{
return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
}
asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
int msgflg)
SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
int, msgtyp, int, msgflg)
{
return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
compat_ptr(msgp));
@ -277,7 +279,7 @@ struct sysctl_args32
#ifdef CONFIG_SYSCTL_SYSCALL
asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
{
struct sysctl_args32 tmp;
int error;
@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
return error;
}
#else
SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
{
return -ENOSYS;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
asmlinkage long sys32_newuname(struct new_utsname __user * name)
SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
{
int ret = 0;
@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name)
return ret;
}
asmlinkage int sys32_personality(unsigned long personality)
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
int ret;
personality &= 0xffffffff;
@ -357,7 +366,7 @@ struct ustat32 {
extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
{
int err;
struct ustat tmp;
@ -381,8 +390,8 @@ out:
return err;
}
asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
s32 count)
SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
compat_off_t __user *, offset, s32, count)
{
mm_segment_t old_fs = get_fs();
int ret;

4
arch/mips/kernel/scall32-o32.S
View File

@ -399,7 +399,7 @@ einval: li v0, -ENOSYS
sys sys_swapon 2
sys sys_reboot 3
sys sys_old_readdir 3
sys old_mmap 6 /* 4090 */
sys sys_mips_mmap 6 /* 4090 */
sys sys_munmap 2
sys sys_truncate 2
sys sys_ftruncate 2
@ -519,7 +519,7 @@ einval: li v0, -ENOSYS
sys sys_sendfile 4
sys sys_ni_syscall 0
sys sys_ni_syscall 0
sys sys_mmap2 6 /* 4210 */
sys sys_mips_mmap2 6 /* 4210 */
sys sys_truncate64 4
sys sys_ftruncate64 4
sys sys_stat64 2

2
arch/mips/kernel/scall64-64.S
View File

@ -207,7 +207,7 @@ sys_call_table:
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
PTR old_mmap
PTR sys_mips_mmap
PTR sys_mprotect /* 5010 */
PTR sys_munmap
PTR sys_brk

28
arch/mips/kernel/scall64-n32.S
View File

@ -129,12 +129,12 @@ EXPORT(sysn32_call_table)
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
PTR old_mmap
PTR sys_mips_mmap
PTR sys_mprotect /* 6010 */
PTR sys_munmap
PTR sys_brk
PTR sys32_rt_sigaction
PTR sys32_rt_sigprocmask
PTR sys_32_rt_sigaction
PTR sys_32_rt_sigprocmask
PTR compat_sys_ioctl /* 6015 */
PTR sys_pread64
PTR sys_pwrite64
@ -159,7 +159,7 @@ EXPORT(sysn32_call_table)
PTR compat_sys_setitimer
PTR sys_alarm
PTR sys_getpid
PTR sys32_sendfile
PTR sys_32_sendfile
PTR sys_socket /* 6040 */
PTR sys_connect
PTR sys_accept
@ -181,14 +181,14 @@ EXPORT(sysn32_call_table)
PTR sys_exit
PTR compat_sys_wait4
PTR sys_kill /* 6060 */
PTR sys32_newuname
PTR sys_32_newuname
PTR sys_semget
PTR sys_semop
PTR sysn32_semctl
PTR sys_n32_semctl
PTR sys_shmdt /* 6065 */
PTR sys_msgget
PTR sysn32_msgsnd
PTR sysn32_msgrcv
PTR sys_n32_msgsnd
PTR sys_n32_msgrcv
PTR compat_sys_msgctl
PTR compat_sys_fcntl /* 6070 */
PTR sys_flock
@ -245,15 +245,15 @@ EXPORT(sysn32_call_table)
PTR sys_getsid
PTR sys_capget
PTR sys_capset
PTR sys32_rt_sigpending /* 6125 */
PTR sys_32_rt_sigpending /* 6125 */
PTR compat_sys_rt_sigtimedwait
PTR sys32_rt_sigqueueinfo
PTR sys_32_rt_sigqueueinfo
PTR sysn32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
PTR sys32_personality
PTR sys32_ustat
PTR sys_32_personality
PTR sys_32_ustat
PTR compat_sys_statfs
PTR compat_sys_fstatfs /* 6135 */
PTR sys_sysfs
@ -265,14 +265,14 @@ EXPORT(sysn32_call_table)
PTR sys_sched_getscheduler
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
PTR sys32_sched_rr_get_interval /* 6145 */
PTR sys_32_sched_rr_get_interval /* 6145 */
PTR sys_mlock
PTR sys_munlock
PTR sys_mlockall
PTR sys_munlockall
PTR sys_vhangup /* 6150 */
PTR sys_pivot_root
PTR sys32_sysctl
PTR sys_32_sysctl
PTR sys_prctl
PTR compat_sys_adjtimex
PTR compat_sys_setrlimit /* 6155 */

40
arch/mips/kernel/scall64-o32.S
View File

@ -265,12 +265,12 @@ sys_call_table:
PTR sys_olduname
PTR sys_umask /* 4060 */
PTR sys_chroot
PTR sys32_ustat
PTR sys_32_ustat
PTR sys_dup2
PTR sys_getppid
PTR sys_getpgrp /* 4065 */
PTR sys_setsid
PTR sys32_sigaction
PTR sys_32_sigaction
PTR sys_sgetmask
PTR sys_ssetmask
PTR sys_setreuid /* 4070 */
@ -293,7 +293,7 @@ sys_call_table:
PTR sys_swapon
PTR sys_reboot
PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_mips_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_ftruncate
@ -320,12 +320,12 @@ sys_call_table:
PTR compat_sys_wait4
PTR sys_swapoff /* 4115 */
PTR compat_sys_sysinfo
PTR sys32_ipc
PTR sys_32_ipc
PTR sys_fsync
PTR sys32_sigreturn
PTR sys32_clone /* 4120 */
PTR sys_setdomainname
PTR sys32_newuname
PTR sys_32_newuname
PTR sys_ni_syscall /* sys_modify_ldt */
PTR compat_sys_adjtimex
PTR sys_mprotect /* 4125 */
@ -339,11 +339,11 @@ sys_call_table:
PTR sys_fchdir
PTR sys_bdflush
PTR sys_sysfs /* 4135 */
PTR sys32_personality
PTR sys_32_personality
PTR sys_ni_syscall /* for afs_syscall */
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
PTR sys_32_llseek /* 4140 */
PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
@ -356,7 +356,7 @@ sys_call_table:
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
PTR sys32_sysctl
PTR sys_32_sysctl
PTR sys_mlock
PTR sys_munlock /* 4155 */
PTR sys_mlockall
@ -368,7 +368,7 @@ sys_call_table:
PTR sys_sched_yield
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
PTR sys32_sched_rr_get_interval /* 4165 */
PTR sys_32_sched_rr_get_interval /* 4165 */
PTR compat_sys_nanosleep
PTR sys_mremap
PTR sys_accept
@ -397,25 +397,25 @@ sys_call_table:
PTR sys_getresgid
PTR sys_prctl
PTR sys32_rt_sigreturn
PTR sys32_rt_sigaction
PTR sys32_rt_sigprocmask /* 4195 */
PTR sys32_rt_sigpending
PTR sys_32_rt_sigaction
PTR sys_32_rt_sigprocmask /* 4195 */
PTR sys_32_rt_sigpending
PTR compat_sys_rt_sigtimedwait
PTR sys32_rt_sigqueueinfo
PTR sys_32_rt_sigqueueinfo
PTR sys32_rt_sigsuspend
PTR sys32_pread /* 4200 */
PTR sys32_pwrite
PTR sys_32_pread /* 4200 */
PTR sys_32_pwrite
PTR sys_chown
PTR sys_getcwd
PTR sys_capget
PTR sys_capset /* 4205 */
PTR sys32_sigaltstack
PTR sys32_sendfile
PTR sys_32_sendfile
PTR sys_ni_syscall
PTR sys_ni_syscall
PTR sys32_mmap2 /* 4210 */
PTR sys32_truncate64
PTR sys32_ftruncate64
PTR sys_mips_mmap2 /* 4210 */
PTR sys_32_truncate64
PTR sys_32_ftruncate64
PTR sys_newstat
PTR sys_newlstat
PTR sys_newfstat /* 4215 */
@ -481,7 +481,7 @@ sys_call_table:
PTR compat_sys_mq_notify /* 4275 */
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* sys_vserver */
PTR sys32_waitid
PTR sys_32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key /* 4280 */
PTR sys_request_key

5
arch/mips/kernel/signal.c
View File

@ -19,6 +19,7 @@
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compiler.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <asm/abi.h>
@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
}
#ifdef CONFIG_TRAD_SIGNALS
asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
struct sigaction __user *oact)
SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
struct sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;

28
arch/mips/kernel/signal32.c
View File

@ -349,8 +349,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
return -ERESTARTNOHAND;
}
asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
struct sigaction32 __user *oact)
SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
struct sigaction32 __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
@ -704,9 +704,9 @@ struct mips_abi mips_abi_32 = {
.restart = __NR_O32_restart_syscall
};
asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
struct sigaction32 __user *oact,
unsigned int sigsetsize)
SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
const struct sigaction32 __user *, act,
struct sigaction32 __user *, oact, unsigned int, sigsetsize)
{
struct k_sigaction new_sa, old_sa;
int ret = -EINVAL;
@ -748,8 +748,8 @@ out:
return ret;
}
asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
compat_sigset_t __user *oset, unsigned int sigsetsize)
SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
compat_sigset_t __user *, oset, unsigned int, sigsetsize)
{
sigset_t old_set, new_set;
int ret;
@ -770,8 +770,8 @@ asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
return ret;
}
asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
unsigned int sigsetsize)
SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
unsigned int, sigsetsize)
{
int ret;
sigset_t set;
@ -787,7 +787,8 @@ asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
return ret;
}
asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
compat_siginfo_t __user *, uinfo)
{
siginfo_t info;
int ret;
@ -802,10 +803,9 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *
return ret;
}
asmlinkage long
sys32_waitid(int which, compat_pid_t pid,
compat_siginfo_t __user *uinfo, int options,
struct compat_rusage __user *uru)
SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
compat_siginfo_t __user *, uinfo, int, options,
struct compat_rusage __user *, uru)
{
siginfo_t info;
struct rusage ru;

Some files were not shown because too many files have changed in this diff Show More