renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
Code

Staging: rtxx70: merge rt3070 with rt2870

Browse Source 
* remove RT30xx ifdefs
* add -DRT3070 to rt2870's EXTRA_CFLAGS
* because of changes in the way that hardware is initialized/accessed
  rt3070 driver's firmware should be now also used by rt2870 driver
  (this is also done by newer out-of-tree vendor driver versions, i.e.
  2.1.0.0, historically in-kernel driver was based on 1.4.0.0 version)
* change RT28xx_CHIP_NAME to RTxx70
* update rt2870's help entry text
* add MODULE_ALIAS("rt3070sta") to rt2870
* update rt3070's dependencies

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2009-08-23 15:32:06 +02:00 committed by Greg Kroah-Hartman
parent 606661ea04
commit 9eeb783ed4
12 changed files with 33 additions and 168 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/staging/rt2860/common/cmm_info.c
View File

@ -1419,17 +1419,6 @@ VOID RTMPSetHT(
pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
}
#ifndef RT30xx
#ifdef RT2870
/* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
{
pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0;
pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
}
#endif // RT2870 //
#endif
if(pHTPhyMode->SHORTGI == GI_400)
{
pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;

30
drivers/staging/rt2860/common/mlme.c
View File

@ -5565,8 +5565,7 @@ VOID AsicUpdateProtect(
}
}
#ifdef RT30xx
// add by johnli, RF power sequence setup
#ifdef RT2870
/*
==========================================================================
Description:
@ -5721,8 +5720,7 @@ VOID RT30xxReverseRFSleepModeSetup(
RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
}
}
// end johnli
#endif // RT30xx //
#endif
/*
==========================================================================
@ -5764,9 +5762,7 @@ VOID AsicSwitchChannel(
#ifdef RT2870
// The RF programming sequence is difference between 3xxx and 2xxx
if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && (
#ifdef RT30xx
(pAd->RfIcType == RFIC_3022) || (pAd->RfIcType == RFIC_3021) ||
#endif
(pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
{
/* modify by WY for Read RF Reg. error */
@ -5789,7 +5785,6 @@ VOID AsicSwitchChannel(
RFValue = (RFValue & 0xE0) | TxPwer;
RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
#ifdef RT30xx
// Set Tx1 Power
RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
RFValue = (RFValue & 0xE0) | TxPwer2;
@ -5809,7 +5804,6 @@ VOID AsicSwitchChannel(
else if (pAd->Antenna.field.RxPath == 2)
RFValue |= 0x40;
RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
#endif
// Set RF offset
RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
@ -5827,9 +5821,8 @@ VOID AsicSwitchChannel(
RFValue = pAd->Mlme.CaliBW20RfR24;
}
RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
#ifdef RT30xx
RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
#endif
// Enable RF tuning
RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
RFValue = RFValue | 0x1;
@ -5838,7 +5831,6 @@ VOID AsicSwitchChannel(
// latch channel for future usage.
pAd->LatchRfRegs.Channel = Channel;
#ifdef RT30xx
DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
Channel,
pAd->RfIcType,
@ -5848,8 +5840,6 @@ VOID AsicSwitchChannel(
FreqItems3020[index].N,
FreqItems3020[index].K,
FreqItems3020[index].R));
#endif
break;
}
}
@ -6828,13 +6818,13 @@ VOID AsicSetEdcaParm(
Ac2Cfg.field.AcTxop = 5;
}
#ifdef RT30xx
#ifdef RT2870
if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
{
// Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
Ac2Cfg.field.Aifsn = 5;
}
#endif // RT30xx //
#endif
}
Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
@ -6915,11 +6905,10 @@ VOID AsicSetEdcaParm(
}
AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
#ifdef RT30xx
#ifdef RT2870
if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
#endif // RT30xx //
#endif
RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@ -8493,12 +8482,7 @@ VOID AsicStaBbpTuning(
#ifdef RT2870
// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
// Otherwise, it will have some throughput side effect when low RSSI
#ifndef RT30xx
if (IS_RT3070(pAd))
#endif
#ifdef RT30xx
if (IS_RT30xx(pAd))
#endif
{
if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
{

81
drivers/staging/rt2860/common/rtmp_init.c
View File

@ -38,16 +38,12 @@
Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
*/
#include "../rt_config.h"
#ifndef RT30xx
#ifdef RT2860
#include "firmware.h"
#include <linux/bitrev.h>
#endif
#ifdef RT2870
#include "../../rt2870/common/firmware.h"
#endif
#endif
#ifdef RT30xx
/* New firmware handles both RT2870 and RT3070. */
#include "../../rt3070/firmware.h"
#endif
@ -147,12 +143,7 @@ REG_PAIR RT30xx_RFRegTable[] = {
{RF_R06, 0x02},
{RF_R07, 0x70},
{RF_R09, 0x0F},
#ifndef RT30xx
{RF_R10, 0x71},
#endif
#ifdef RT30xx
{RF_R10, 0x41},
#endif
{RF_R11, 0x21},
{RF_R12, 0x7B},
{RF_R14, 0x90},
@ -165,9 +156,6 @@ REG_PAIR RT30xx_RFRegTable[] = {
{RF_R21, 0xDB},
{RF_R24, 0x16},
{RF_R25, 0x01},
#ifndef RT30xx
{RF_R27, 0x03},
#endif
{RF_R29, 0x1F},
};
#define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
@ -1107,7 +1095,7 @@ VOID RTMPFilterCalibration(
UCHAR RF_R24_Value = 0;
// Give bbp filter initial value
#ifndef RT30xx
#ifndef RT2870
pAd->Mlme.CaliBW20RfR24 = 0x16;
pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40
#else
@ -1131,7 +1119,7 @@ VOID RTMPFilterCalibration(
BBPValue&= (~0x18);
BBPValue|= (0x10);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
#ifdef RT30xx
#ifdef RT2870
// set to BW40
RT30xxReadRFRegister(pAd, RF_R31, &value);
value |= 0x20;
@ -1147,7 +1135,7 @@ VOID RTMPFilterCalibration(
FilterTarget = 0x13;
else
FilterTarget = 0x16;
#ifdef RT30xx
#ifdef RT2870
// set to BW20
RT30xxReadRFRegister(pAd, RF_R31, &value);
value &= (~0x20);
@ -1263,20 +1251,13 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
INT i;
// Driver must read EEPROM to get RfIcType before initial RF registers
// Initialize RF register to default value
if (IS_RT3070(pAd)
#ifdef RT30xx
|| IS_RT3071(pAd)
#else
&& (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
#endif
)
if (IS_RT3070(pAd) || IS_RT3071(pAd))
{
// Init RF calibration
// Driver should toggle RF R30 bit7 before init RF registers
UINT32 RfReg = 0;
#ifdef RT30xx
UINT32 data;
#endif
RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
RfReg |= 0x80;
RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
@ -1290,7 +1271,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
}
#ifdef RT30xx
if (IS_RT3070(pAd))
{
// Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
@ -1328,10 +1308,10 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
data &= ~(0x20);
RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
}
#endif
//For RF filter Calibration
RTMPFilterCalibration(pAd);
#ifdef RT30xx
// Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
if ((pAd->MACVersion & 0xffff) < 0x0211)
RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
@ -1346,7 +1326,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
// add by johnli, RF power sequence setup, load RF normal operation-mode setup
RT30xxLoadRFNormalModeSetup(pAd);
}
#endif
}
}
#endif // RT2870 //
@ -1567,9 +1546,6 @@ VOID NICReadEEPROMParameters(
NicConfig2.word = pAd->EEPROMDefaultValue[1];
{
#ifndef RT30xx
NicConfig2.word = 0;
#endif
if ((NicConfig2.word & 0x00ff) == 0xff)
{
NicConfig2.word &= 0xff00;
@ -1806,10 +1782,9 @@ VOID NICInitAsicFromEEPROM(
}
}
#ifndef RT30xx
#ifndef RT2870
Antenna.word = pAd->Antenna.word;
#endif
#ifdef RT30xx
#else
Antenna.word = pAd->EEPROMDefaultValue[0];
if (Antenna.word == 0xFFFF)
{
@ -1820,7 +1795,7 @@ VOID NICInitAsicFromEEPROM(
pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
#ifdef RT30xx
#ifdef RT2870
DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
// Save the antenna for future use
@ -1828,7 +1803,7 @@ VOID NICInitAsicFromEEPROM(
#endif
NicConfig2.word = pAd->EEPROMDefaultValue[1];
#ifdef RT30xx
#ifdef RT2870
{
if ((NicConfig2.word & 0x00ff) == 0xff)
{
@ -1844,7 +1819,7 @@ VOID NICInitAsicFromEEPROM(
// Save the antenna for future use
pAd->NicConfig2.word = NicConfig2.word;
#ifdef RT30xx
#ifdef RT2870
// set default antenna as main
if (pAd->RfIcType == RFIC_3020)
AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
@ -2251,21 +2226,8 @@ NDIS_STATUS NICInitializeAsic(
#endif // RT3070 //
RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
}
#ifndef RT30xx
if(IS_RT3070(pAd))
{
// According to Frank Hsu (from Gary Tsao)
RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400);
// Initialize RT3070 serial MAC registers which is different from RT2870 serial
RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
}
#endif
#endif // RT2870 //
{
for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
{
@ -2300,7 +2262,7 @@ NDIS_STATUS NICInitializeAsic(
RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
}
}
#ifdef RT30xx
#ifdef RT2870
else if (IS_RT3070(pAd))
{
RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
@ -2347,22 +2309,11 @@ NDIS_STATUS NICInitializeAsic(
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
}
#ifndef RT30xx
#ifndef RT2870
// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
if ((pAd->MACVersion&0xffff) != 0x0101)
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
#ifdef RT2870
//write RT3070 BBP wchich different with 2870 after write RT2870 BBP
if (IS_RT3070(pAd))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
}
#endif // RT2870 //
#endif
#ifdef RT30xx
#else
// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
// RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))

2
drivers/staging/rt2860/rt_main_dev.c
View File

@ -522,7 +522,7 @@ static int rt28xx_init(IN struct net_device *net_dev)
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
#ifndef RT30xx
#ifndef RT2870
// 8051 firmware require the signal during booting time.
AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
#endif

4
drivers/staging/rt2860/rtmp.h
View File

@ -391,14 +391,14 @@ typedef struct _QUEUE_HEADER {
(_idx) = (_idx+1) % (_RingSize); \
}
#ifdef RT30xx
#ifdef RT2870
// We will have a cost down version which mac version is 0x3090xxxx
#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
#else
#define IS_RT3090(_pAd) 0
#endif
#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
#ifdef RT30xx
#ifdef RT2870
#define IS_RT3071(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
#define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
#endif

23
drivers/staging/rt2870/2870_main_dev.c
View File

@ -50,6 +50,7 @@ MODULE_LICENSE("GPL");
#ifdef MODULE_VERSION
MODULE_VERSION(STA_DRIVER_VERSION);
#endif
MODULE_ALIAS("rt3070sta");
/* Kernel thread and vars, which handles packets that are completed. Only
* packets that have a "complete" function are sent here. This way, the
@ -65,19 +66,15 @@ struct usb_device_id rtusb_usb_id[] = {
{ USB_DEVICE(0x1737, 0x0070) }, /* Linksys */
{ USB_DEVICE(0x148F, 0x2870) }, /* Ralink */
{ USB_DEVICE(0x148F, 0x3070) }, /* Ralink 3070 */
#ifdef RT30xx
{ USB_DEVICE(0x148F, 0x3071) }, /* Ralink 3071 */
{ USB_DEVICE(0x148F, 0x3072) }, /* Ralink 3072 */
#endif
{ USB_DEVICE(0x0B05, 0x1731) }, /* Asus */
{ USB_DEVICE(0x0B05, 0x1732) }, /* Asus */
{ USB_DEVICE(0x0B05, 0x1742) }, /* Asus */
{ USB_DEVICE(0x0DF6, 0x0017) }, /* Sitecom */
{ USB_DEVICE(0x0DF6, 0x002B) }, /* Sitecom */
{ USB_DEVICE(0x0DF6, 0x002C) }, /* Sitecom */
#ifdef RT30xx
{ USB_DEVICE(0x0DF6, 0x003E) }, /* Sitecom 3070 */
#endif
{ USB_DEVICE(0x0DF6, 0x002D) }, /* Sitecom */
{ USB_DEVICE(0x0DF6, 0x0039) }, /* Sitecom 2770 */
{ USB_DEVICE(0x0DF6, 0x003F) }, /* Sitecom WL-608 */
@ -88,10 +85,8 @@ struct usb_device_id rtusb_usb_id[] = {
{ USB_DEVICE(0x2019, 0xAB25) }, /* Planex Communications, Inc. RT3070 */
{ USB_DEVICE(0x07D1, 0x3C09) }, /* D-Link */
{ USB_DEVICE(0x07D1, 0x3C11) }, /* D-Link */
#ifdef RT30xx
{ USB_DEVICE(0x2001, 0x3C09) }, /* D-Link */
{ USB_DEVICE(0x2001, 0x3C0A) }, /* D-Link 3072*/
#endif
{ USB_DEVICE(0x14B2, 0x3C07) }, /* AL */
{ USB_DEVICE(0x14B2, 0x3C12) }, /* AL 3070 */
{ USB_DEVICE(0x050D, 0x8053) }, /* Belkin */
@ -104,34 +99,24 @@ struct usb_device_id rtusb_usb_id[] = {
{ USB_DEVICE(0x07AA, 0x003F) }, /* Corega */
{ USB_DEVICE(0x18C5, 0x0012) }, /* Corega 3070 */
{ USB_DEVICE(0x1044, 0x800B) }, /* Gigabyte */
#ifdef RT30xx
{ USB_DEVICE(0x1044, 0x800D) }, /* Gigabyte GN-WB32L 3070 */
#endif
{ USB_DEVICE(0x15A9, 0x0006) }, /* Sparklan */
{ USB_DEVICE(0x083A, 0xB522) }, /* SMC */
{ USB_DEVICE(0x083A, 0xA618) }, /* SMC */
#ifdef RT30xx
{ USB_DEVICE(0x083A, 0x8522) }, /* Arcadyan */
{ USB_DEVICE(0x083A, 0x7512) }, /* Arcadyan 2770 */
#endif
{ USB_DEVICE(0x083A, 0x7522) }, /* Arcadyan */
#ifdef RT30xx
{ USB_DEVICE(0x083A, 0x7511) }, /* Arcadyan 3070 */
#endif
{ USB_DEVICE(0x0CDE, 0x0022) }, /* ZCOM */
{ USB_DEVICE(0x0586, 0x3416) }, /* Zyxel */
{ USB_DEVICE(0x0CDE, 0x0025) }, /* Zyxel */
{ USB_DEVICE(0x1740, 0x9701) }, /* EnGenius */
{ USB_DEVICE(0x1740, 0x9702) }, /* EnGenius */
#ifdef RT30xx
{ USB_DEVICE(0x1740, 0x9703) }, /* EnGenius 3070 */
#endif
{ USB_DEVICE(0x0471, 0x200f) }, /* Philips */
{ USB_DEVICE(0x14B2, 0x3C25) }, /* Draytek */
{ USB_DEVICE(0x13D3, 0x3247) }, /* AzureWave */
#ifdef RT30xx
{ USB_DEVICE(0x13D3, 0x3273) }, /* AzureWave 3070*/
#endif
{ USB_DEVICE(0x083A, 0x6618) }, /* Accton */
{ USB_DEVICE(0x15c5, 0x0008) }, /* Amit */
{ USB_DEVICE(0x0E66, 0x0001) }, /* Hawking */
@ -146,23 +131,17 @@ struct usb_device_id rtusb_usb_id[] = {
{ USB_DEVICE(0x07B8, 0x3071) }, /* AboCom 3071 */
{ USB_DEVICE(0x07B8, 0x2870) }, /* AboCom */
{ USB_DEVICE(0x07B8, 0x2770) }, /* AboCom */
#ifdef RT30xx
{ USB_DEVICE(0x07B8, 0x3072) }, /* Abocom 3072 */
#endif
{ USB_DEVICE(0x7392, 0x7711) }, /* Edimax 3070 */
{ USB_DEVICE(0x5A57, 0x0280) }, /* Zinwell */
{ USB_DEVICE(0x5A57, 0x0282) }, /* Zinwell */
#ifdef RT30xx
{ USB_DEVICE(0x1A32, 0x0304) }, /* Quanta 3070 */
#endif
{ USB_DEVICE(0x0789, 0x0162) }, /* Logitec 2870 */
{ USB_DEVICE(0x0789, 0x0163) }, /* Logitec 2870 */
{ USB_DEVICE(0x0789, 0x0164) }, /* Logitec 2870 */
{ USB_DEVICE(0x7392, 0x7717) }, /* Edimax */
#ifdef RT30xx
{ USB_DEVICE(0x1EDA, 0x2310) }, /* AirTies 3070 */
{ USB_DEVICE(0x1737, 0x0077) }, /* Linksys WUSB54GC-EU v3 */
#endif
{ } /* Terminating entry */
};

5
drivers/staging/rt2870/Kconfig
View File

@ -1,6 +1,5 @@
config RT2870
tristate "Ralink 2870 wireless support"
tristate "Ralink 2870/3070 wireless support"
depends on USB && X86 && WLAN_80211
---help---
This is an experimental driver for the Ralink 2870 wireless chip.
This is an experimental driver for the Ralink xx70 wireless chips.

2
drivers/staging/rt2870/Makefile
View File

@ -2,7 +2,7 @@ obj-$(CONFIG_RT2870) += rt2870sta.o
# TODO: all of these should be removed
EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
EXTRA_CFLAGS += -DRT2870
EXTRA_CFLAGS += -DRT2870 -DRT3070
EXTRA_CFLAGS += -DDBG
rt2870sta-objs := \

30
drivers/staging/rt2870/common/cmm_data_2870.c
View File

@ -810,12 +810,7 @@ VOID RT28xxUsbStaAsicForceWakeup(
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
#ifndef RT30xx
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
#endif
#ifdef RT30xx
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
#endif
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
@ -852,12 +847,7 @@ VOID RT28xxUsbMlmeRadioOn(
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
return;
#ifndef RT30xx
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
#endif
#ifdef RT30xx
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
#endif
RTMPusecDelay(10000);
NICResetFromError(pAd);
@ -908,22 +898,6 @@ VOID RT28xxUsbMlmeRadioOFF(
BssTableInit(&pAd->ScanTab);
}
#ifndef RT30xx
// Disable MAC Tx/Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= (0xfffffff3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// MAC_SYS_CTRL => value = 0x0 => 40mA
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0);
// PWR_PIN_CFG => value = 0x0 => 40mA
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0);
// TX_PIN_CFG => value = 0x0 => 20mA
RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
#endif
if (pAd->CommonCfg.BBPCurrentBW == BW_40)
{
// Must using 40MHz.
@ -935,13 +909,11 @@ VOID RT28xxUsbMlmeRadioOFF(
AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
}
#ifdef RT30xx
// Disable Tx/Rx DMA
RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA
GloCfg.field.EnableTxDMA = 0;
GloCfg.field.EnableRxDMA = 0;
RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings
#endif
// Waiting for DMA idle
i = 0;
@ -954,12 +926,10 @@ VOID RT28xxUsbMlmeRadioOFF(
RTMPusecDelay(1000);
}while (i++ < 100);
#ifdef RT30xx
// Disable MAC Tx/Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= (0xfffffff3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
#endif
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
}

2
drivers/staging/rt2870/common/rtusb_io.c
View File

@ -110,11 +110,9 @@ NTSTATUS RTUSBFirmwareWrite(
Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
Status = RTUSBFirmwareRun(pAd);
#ifdef RT30xx
RTMPusecDelay(10000);
RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0);
AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware
#endif
return Status;
}

9
drivers/staging/rt2870/rt2870.h
View File

@ -349,11 +349,8 @@ extern UCHAR EpToQueue[6];
{ RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL); \
RTUSBKickBulkOut(pAd); }
#ifdef RT30xx
#define RT28xx_CHIP_NAME "RT3070"
#else
#define RT28xx_CHIP_NAME "RT2870"
#endif
#define RT28xx_CHIP_NAME "RTxx70"
#define USB_CYC_CFG 0x02a4
#define STATUS_SUCCESS 0x00
#define STATUS_UNSUCCESSFUL 0x01
@ -462,9 +459,7 @@ typedef struct _RT_SET_ASIC_WCID {
ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
ULONG SetTid; // time-based: seconds, packet-based: kilo-packets
ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets
#ifndef RT30xx
UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key
#endif
} RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID;
typedef struct _RT_SET_ASIC_WCID_ATTRI {

2
drivers/staging/rt3070/Kconfig
View File

@ -1,6 +1,6 @@
config RT3070
tristate "Ralink 3070 wireless support"
depends on USB && X86 && WLAN_80211
depends on USB && X86 && WLAN_80211 && !RT2870
---help---
This is an experimental driver for the Ralink 3070 wireless chip.