mirror of
https://github.com/edk2-porting/linux-next.git
synced 2025-01-06 12:44:14 +08:00
net: phy: at803x: fix NULL pointer dereference on AR9331 PHY
Latest kernel will explode on the PHY interrupt config, since it depends
now on allocated priv. So, run probe to allocate priv to fix it.
ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
...
Call Trace:
[<8050e8a8>] at803x_config_intr+0x5c/0xd0
[<80504b34>] phy_request_interrupt+0xa8/0xd0
[<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
[<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
[<8074d8ec>] dsa_slave_create+0x270/0x420
[<80743b04>] dsa_port_setup+0x12c/0x148
[<8074580c>] dsa_register_switch+0xaf0/0xcc0
[<80511344>] ar9331_sw_probe+0x370/0x388
[<8050cb78>] mdio_probe+0x44/0x70
[<804df300>] really_probe+0x200/0x424
[<804df7b4>] __driver_probe_device+0x290/0x298
[<804df810>] driver_probe_device+0x54/0xe4
[<804dfd50>] __device_attach_driver+0xe4/0x130
[<804dcb00>] bus_for_each_drv+0xb4/0xd8
[<804dfac4>] __device_attach+0x104/0x1a4
[<804ddd24>] bus_probe_device+0x48/0xc4
[<804deb44>] deferred_probe_work_func+0xf0/0x10c
[<800a0ffc>] process_one_work+0x314/0x4d4
[<800a17fc>] worker_thread+0x2a4/0x354
[<800a9a54>] kthread+0x134/0x13c
[<8006306c>] ret_from_kernel_thread+0x14/0x1c
Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it
too.
Fixes: 3265f42188
("net: phy: at803x: add fiber support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
8fc74d1863
commit
9926de7315
@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = {
|
||||
/* ATHEROS AR9331 */
|
||||
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
|
||||
.name = "Qualcomm Atheros AR9331 built-in PHY",
|
||||
.probe = at803x_probe,
|
||||
.remove = at803x_remove,
|
||||
.suspend = at803x_suspend,
|
||||
.resume = at803x_resume,
|
||||
.flags = PHY_POLL_CABLE_TEST,
|
||||
@ -2087,6 +2089,8 @@ static struct phy_driver at803x_driver[] = {
|
||||
/* Qualcomm Atheros QCA9561 */
|
||||
PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
|
||||
.name = "Qualcomm Atheros QCA9561 built-in PHY",
|
||||
.probe = at803x_probe,
|
||||
.remove = at803x_remove,
|
||||
.suspend = at803x_suspend,
|
||||
.resume = at803x_resume,
|
||||
.flags = PHY_POLL_CABLE_TEST,
|
||||
@ -2151,6 +2155,8 @@ static struct phy_driver at803x_driver[] = {
|
||||
PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
|
||||
.name = "Qualcomm QCA8081",
|
||||
.flags = PHY_POLL_CABLE_TEST,
|
||||
.probe = at803x_probe,
|
||||
.remove = at803x_remove,
|
||||
.config_intr = at803x_config_intr,
|
||||
.handle_interrupt = at803x_handle_interrupt,
|
||||
.get_tunable = at803x_get_tunable,
|
||||
|
Loading…
Reference in New Issue
Block a user