mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-20 19:23:57 +08:00
ASoC: adau1701: add support for pin muxing
The ADAU1701 has 12 pins that can be configured depending on the system configuration. Allow settting the corresponding registers from DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
parent
45405d5892
commit
97d0a86845
@ -16,6 +16,10 @@ Optional properties:
|
||||
The state of the pins are set according to the
|
||||
configured clock divider on ASoC side before the
|
||||
firmware is loaded.
|
||||
- adi,pin-config: An array of 12 numerical values selecting one of the
|
||||
pin configurations as described in the datasheet,
|
||||
table 53. Note that the value of this property has
|
||||
to be prefixed with '/bits/ 8'.
|
||||
|
||||
Examples:
|
||||
|
||||
@ -25,5 +29,7 @@ Examples:
|
||||
reg = <0x34>;
|
||||
reset-gpio = <&gpio 23 0>;
|
||||
adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
|
||||
adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
|
||||
0x4 0x4 0x4 0x4 0x4 0x4>;
|
||||
};
|
||||
};
|
||||
|
@ -29,6 +29,9 @@
|
||||
#define ADAU1701_SEROCTL 0x081e
|
||||
#define ADAU1701_SERICTL 0x081f
|
||||
|
||||
#define ADAU1701_AUXNPOW 0x0822
|
||||
#define ADAU1701_PINCONF_0 0x0820
|
||||
#define ADAU1701_PINCONF_1 0x0821
|
||||
#define ADAU1701_AUXNPOW 0x0822
|
||||
|
||||
#define ADAU1701_OSCIPOW 0x0826
|
||||
@ -99,6 +102,7 @@ struct adau1701 {
|
||||
unsigned int pll_clkdiv;
|
||||
unsigned int sysclk;
|
||||
struct regmap *regmap;
|
||||
u8 pin_config[12];
|
||||
};
|
||||
|
||||
static const struct snd_kcontrol_new adau1701_controls[] = {
|
||||
@ -134,6 +138,9 @@ static unsigned int adau1701_register_size(struct device *dev,
|
||||
unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case ADAU1701_PINCONF_0:
|
||||
case ADAU1701_PINCONF_1:
|
||||
return 3;
|
||||
case ADAU1701_DSPCTRL:
|
||||
case ADAU1701_SEROCTL:
|
||||
case ADAU1701_AUXNPOW:
|
||||
@ -164,7 +171,7 @@ static int adau1701_reg_write(void *context, unsigned int reg,
|
||||
struct i2c_client *client = context;
|
||||
unsigned int i;
|
||||
unsigned int size;
|
||||
uint8_t buf[4];
|
||||
uint8_t buf[5];
|
||||
int ret;
|
||||
|
||||
size = adau1701_register_size(&client->dev, reg);
|
||||
@ -584,7 +591,8 @@ MODULE_DEVICE_TABLE(of, adau1701_dt_ids);
|
||||
|
||||
static int adau1701_probe(struct snd_soc_codec *codec)
|
||||
{
|
||||
int ret;
|
||||
int i, ret;
|
||||
unsigned int val;
|
||||
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
|
||||
|
||||
codec->control_data = to_i2c_client(codec->dev);
|
||||
@ -602,6 +610,19 @@ static int adau1701_probe(struct snd_soc_codec *codec)
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* set up pin config */
|
||||
val = 0;
|
||||
for (i = 0; i < 6; i++)
|
||||
val |= adau1701->pin_config[i] << (i * 4);
|
||||
|
||||
regmap_write(adau1701->regmap, ADAU1701_PINCONF_0, val);
|
||||
|
||||
val = 0;
|
||||
for (i = 0; i < 6; i++)
|
||||
val |= adau1701->pin_config[i + 6] << (i * 4);
|
||||
|
||||
regmap_write(adau1701->regmap, ADAU1701_PINCONF_1, val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -662,6 +683,13 @@ static int adau1701_i2c_probe(struct i2c_client *client,
|
||||
"adi,pll-mode-gpios", 1);
|
||||
if (gpio_pll_mode[1] < 0 && gpio_pll_mode[1] != -ENOENT)
|
||||
return gpio_pll_mode[1];
|
||||
|
||||
of_property_read_u32(dev->of_node, "adi,pll-clkdiv",
|
||||
&adau1701->pll_clkdiv);
|
||||
|
||||
of_property_read_u8_array(dev->of_node, "adi,pin-config",
|
||||
adau1701->pin_config,
|
||||
ARRAY_SIZE(adau1701->pin_config));
|
||||
}
|
||||
|
||||
if (gpio_is_valid(gpio_nreset)) {
|
||||
|
Loading…
Reference in New Issue
Block a user