From 978442532e57b84985f236761d557f1d99c67449 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 10 Dec 2019 12:08:52 -0800 Subject: [PATCH] phy: brcm-sata: Implement 7216 initialization sequence 7216 is a 16nm process chip with a slightly different version of the PHY SerdDeS/AFE that requires a specific tuning sequence. Key on the compatible string to perform that initialization. Signed-off-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/broadcom/phy-brcm-sata.c | 120 +++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 50ac75bbb0c9..4710cfcc3037 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -33,6 +33,7 @@ #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, @@ -104,10 +105,13 @@ enum sata_phy_regs { PLL1_ACTRL5 = 0x85, PLL1_ACTRL6 = 0x86, PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, TX_REG_BANK = 0x070, TX_ACTRL0 = 0x80, TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), AEQRX_REG_BANK_0 = 0xd0, AEQ_CONTROL1 = 0x81, @@ -116,6 +120,7 @@ enum sata_phy_regs { AEQ_FRC_EQ = 0x83, AEQ_FRC_EQ_FORCE = BIT(0), AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), AEQRX_REG_BANK_1 = 0xe0, AEQRX_SLCAL0_CTRL0 = 0x82, AEQRX_SLCAL1_CTRL0 = 0x86, @@ -152,7 +157,28 @@ enum sata_phy_regs { TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, }; enum sata_phy_ctrl_regs { @@ -166,6 +192,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) u32 size = 0; switch (priv->version) { + case BRCM_SATA_PHY_STB_16NM: case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_IPROC_NS2: case BRCM_SATA_PHY_DSL_28NM: @@ -287,6 +314,94 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port) return brcm_stb_sata_rxaeq_init(port); } +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_pcb_base(port); + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + /* NS2 SATA PLL1 defaults were characterized by H/W group */ #define NS2_PLL1_ACTRL2_MAGIC 0x1df8 #define NS2_PLL1_ACTRL3_MAGIC 0x2b00 @@ -544,6 +659,9 @@ static int brcm_sata_phy_init(struct phy *phy) struct brcm_sata_port *port = phy_get_drvdata(phy); switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: rc = brcm_stb_sata_init(port); @@ -601,6 +719,8 @@ static const struct phy_ops phy_ops = { }; static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy",