renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
Code

ath9k: remove cache of rate preference when using 11g protection

Browse Source 
No need to cache when we want to use 2Mbit/s for all protection
frames for 802.11g as we can determine that dynamically on
ath_buf_set_rate() itself.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Luis R. Rodriguez 2008-12-23 15:58:38 -08:00 committed by John W. Linville
parent 030bb495c0
commit 96742256ab
3 changed files with 13 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/net/wireless/ath9k/core.h
View File

@ -718,7 +718,6 @@ struct ath_softc {
u32 sc_keymax;
DECLARE_BITMAP(sc_keymap, ATH_KEYMAX);
u8 sc_splitmic;
u8 sc_protrix;
enum ath9k_int sc_imask;
enum PROT_MODE sc_protmode;
enum ath9k_ht_extprotspacing sc_ht_extprotspacing;

13
drivers/net/wireless/ath9k/main.c
View File

@ -61,12 +61,6 @@ static void bus_read_cachesize(struct ath_softc *sc, int *csz)
static void ath_setcurmode(struct ath_softc *sc, struct ieee80211_conf *conf)
{
/*
* All protection frames are transmited at 2Mb/s for
* 11g, otherwise at 1Mb/s.
* XXX select protection rate index from rate table.
*/
sc->sc_protrix = 0;
switch (conf->channel->band) {
case IEEE80211_BAND_2GHZ:
if (conf_is_ht20(conf))
@ -78,11 +72,9 @@ static void ath_setcurmode(struct ath_softc *sc, struct ieee80211_conf *conf)
else if (conf_is_ht40_plus(conf))
sc->cur_rate_table =
sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
else {
sc->sc_protrix = 1;
else
sc->cur_rate_table =
sc->hw_rate_table[ATH9K_MODE_11G];
}
break;
case IEEE80211_BAND_5GHZ:
if (conf_is_ht20(conf))
@ -95,7 +87,8 @@ static void ath_setcurmode(struct ath_softc *sc, struct ieee80211_conf *conf)
sc->cur_rate_table =
sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
else
sc->cur_rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
sc->cur_rate_table =
sc->hw_rate_table[ATH9K_MODE_11A];
break;
default:
break;

13
drivers/net/wireless/ath9k/xmit.c
View File

@ -546,7 +546,8 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
struct ieee80211_hdr *hdr;
int i, flags, rtsctsena = 0;
struct ieee80211_hw *hw = sc->hw;
int i, flags, rtsctsena = 0, enable_g_protection = 0;
u32 ctsduration = 0;
u8 rix = 0, cix, ctsrate = 0;
__le16 fc;
@ -578,6 +579,12 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA));
cix = rt->info[rix].ctrl_rate;
/* All protection frames are transmited at 2Mb/s for 802.11g,
* otherwise we transmit them at 1Mb/s */
if (hw->conf.channel->band == IEEE80211_BAND_2GHZ &&
!conf_is_ht(&hw->conf))
enable_g_protection = 1;
/*
* If 802.11g protection is enabled, determine whether to use RTS/CTS or
* just CTS. Note that this is only done for OFDM/HT unicast frames.
@ -590,7 +597,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
else if (sc->sc_protmode == PROT_M_CTSONLY)
flags = ATH9K_TXDESC_CTSENA;
cix = rt->info[sc->sc_protrix].ctrl_rate;
cix = rt->info[enable_g_protection].ctrl_rate;
rtsctsena = 1;
}
@ -608,7 +615,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
if (sc->sc_config.ath_aggr_prot &&
(!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) {
flags = ATH9K_TXDESC_RTSENA;
cix = rt->info[sc->sc_protrix].ctrl_rate;
cix = rt->info[enable_g_protection].ctrl_rate;
rtsctsena = 1;
}