mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-17 17:53:56 +08:00
powerpc/85xx: Rework P2020RDB device tree
Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Moved to specifying interrupt-parent for mpic at root * Moved to 4-cell mpic interrupt cells to support MPIC timers * Reworked PCIe nodes to allow supportin IRQs for controller (errors) and moved PCI device IRQs down to virtual bridge level * Updated spi node to new espi binding specification * Renamed 'sdhci' node to 'sdhc' * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum * Fixed wrong reg offsets for mdio nodes associated with etsec2 & * etsec3 * Dropping "fsl,p2020-IP..." from compatibles for standard blocks Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala
parent
7f9ce7143e
commit
941d71c736
@ -9,7 +9,7 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020si.dtsi"
|
||||
/include/ "fsl/p2020si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020RDB";
|
||||
@ -29,7 +29,8 @@
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
lbc: localbus@ffe05000 {
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
|
||||
/* NOR and NAND Flashes */
|
||||
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
|
||||
@ -140,7 +141,9 @@
|
||||
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
i2c@3000 {
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
@ -148,17 +151,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
||||
fsl_m25p80@0 {
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,espi-flash";
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
linux,modalias = "fsl_m25p80";
|
||||
modal = "s25sl128b";
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
@ -202,13 +201,11 @@
|
||||
|
||||
mdio@24520 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
@ -224,11 +221,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ptp_clock@24E00 {
|
||||
compatible = "fsl,etsec-ptp";
|
||||
reg = <0x24E00 0xB0>;
|
||||
interrupts = <68 2 69 2 70 2>;
|
||||
interrupt-parent = < &mpic >;
|
||||
ptp_clock@24e00 {
|
||||
fsl,tclk-period = <5>;
|
||||
fsl,tmr-prsc = <200>;
|
||||
fsl,tmr-add = <0xCCCCCCCD>;
|
||||
@ -252,29 +245,18 @@
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
reg = <0 0xffe08000 0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
@ -286,21 +268,10 @@
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
@ -311,3 +282,5 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p2020si-post.dtsi"
|
||||
|
||||
@ -14,28 +14,16 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020si.dtsi"
|
||||
/include/ "p2020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020RDB";
|
||||
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
aliases {
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
serial0 = &serial0;
|
||||
pci0 = &pci0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P2020@1 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
@ -43,115 +31,18 @@
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
i2c@3000 {
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
||||
fsl_m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,espi-flash";
|
||||
reg = <0>;
|
||||
linux,modalias = "fsl_m25p80";
|
||||
modal = "s25sl128b";
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
/* 512KB for u-boot Bootloader Image */
|
||||
reg = <0x0 0x00080000>;
|
||||
label = "SPI (RO) U-Boot Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
/* 512KB for DTB Image */
|
||||
reg = <0x00080000 0x00080000>;
|
||||
label = "SPI (RO) DTB Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
/* 4MB for Linux Kernel Image */
|
||||
reg = <0x00100000 0x00400000>;
|
||||
label = "SPI (RO) Linux Kernel Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
/* 4MB for Compressed RFS Image */
|
||||
reg = <0x00500000 0x00400000>;
|
||||
label = "SPI (RO) Compressed RFS Image";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
/* 7MB for JFFS2 based RFS */
|
||||
reg = <0x00900000 0x00700000>;
|
||||
label = "SPI (RW) JFFS2 RFS";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "sgmii";
|
||||
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
42 76 77 78 79 /* serial1 , dma2 */
|
||||
@ -164,40 +55,12 @@
|
||||
msi@41600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -15,28 +15,18 @@
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020si.dtsi"
|
||||
/include/ "p2020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020RDB";
|
||||
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
serial0 = &serial1;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P2020@0 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -70,55 +60,10 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0xc300 0x4>;
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <76 2>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <77 2>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <78 2>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <79 2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p2020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -139,12 +84,6 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
fixed-link = <1 1 1000 0 0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -170,22 +109,6 @@
|
||||
>;
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p2020-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0
|
||||
0xe1 0
|
||||
0xe2 0
|
||||
0xe3 0
|
||||
0xe4 0
|
||||
0xe5 0
|
||||
0xe6 0
|
||||
0xe7 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
status = "disabled";
|
||||
};
|
||||
@ -199,30 +122,4 @@
|
||||
pci1: pcie@ffe09000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1
|
||||
>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,355 +0,0 @@
|
||||
/*
|
||||
* P2020 Device Tree Source
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P2020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P2020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P2020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p2020-immr", "simple-bus";
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p2020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p2020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
cell-index = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2 0 0>;
|
||||
mode = "cpu";
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0xc300 0x4>;
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <76 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <77 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <78 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <79 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2 0 0>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p2020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <20 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <21 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <22 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <23 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
interrupts = <28 0x2 0 0>;
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x24520 0x20>;
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x26520 0x20>;
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x520 0x20>;
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
||||
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <2>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x26000 0x1000>;
|
||||
ranges = <0x0 0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
|
||||
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2 0 0>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
||||
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xbfe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,p2020-msi", "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
compatible = "fsl,p2020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe08000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <24 2 0 0>;
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user