renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-26 11:34:42 +08:00
Code

ARM: SoC board updates for 3.14

Browse Source 
This branch is reducing in size for every release since most board-related
 changes have started happening in devicetrees now. Still, we have some things
 going on here.
 
 * Renesas platforms are still adding a bit more legacy device support, something
   that should trail off shortly as they move to full DT.
 * We group most defconfig updates into this branch out of old habits
 * Removal of legacy OMAP2 platforms over to DT continues, and a handful of old
   code is being removed here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4VhpAAoJEIwa5zzehBx3dgMP/2qc+pY4Sx13x5gWMyj29kQd
 LF6JeGLbj3+F+brPh8nXg6feOcsqVN9lpQ7v4+u1tLv6XfYe5kzBTDwF9MFbZi4I
 lV9o4cehcZWjCEx+JIbg1MvuNUCU2k1H7HmDIiOQIuoL9j58f2ZywlH/HmLuo2iZ
 j5Aly006x0s1lUIDhw2w9PJZzzSRBfPr8hW8q+JdLZinlA5Nd4jSxDX0QoSZE+2t
 2GJMb//Ej1KbLO7fcM6BImNtB0kz4xRkPvINJwh1xGHYKY0BzMCYS3K2zBgoeyut
 /olOK2xpnSjzcp1ToVQSAa7Mr1zbiyxQTKkqRHMnKyD/BTMzgoSVHxCA7yGYsCjz
 mc6AW4v1ucfvXrz0qPXd9fHCIYMyvn6PPv3DmRFU/tR3zJaakI2RvYZFaeyK3RIn
 0NGwMQBe3gGIHFAK5Q9hrPyZtbtGicKHjd6eNrNIVeSyTi1njbviTFRHA5yMqWBL
 eHRM5KxCnp7+6ES61J0YCSF121/V3GT1rJyJnABl3B2UYj/qKXUBAJ2aPqCspWOG
 pcbI7fdeyV67YJvgrV5s8eO7HtPJs9KtOw7Fng4P4Kgjy2XLNfVhQRkaAwe4P914
 HCtZfKCVe4xOWLFHDWApaRpfeOFXZgd0hLOG5jiAEhBRZbRALS044Ta9mAFKqQxx
 v0mqo85bCHixiFWz1UVc
 =wLdE
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "This branch is reducing in size for every release since most
  board-related changes have started happening in devicetrees now.
  Still, we have some things going on here.

   * Renesas platforms are still adding a bit more legacy device
     support, something that should trail off shortly as they move to
     full DT
   * We group most defconfig updates into this branch out of old habits
   * Removal of legacy OMAP2 platforms over to DT continues, and a
     handful of old code is being removed here"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: dts: OMAP2: fix interrupt number for rng
  ARM: dts: Split omap3 pinmux core device
  ARM: dts: Add omap specific pinctrl defines to use padconf addresses
  ARM: bcm2835: bcm2835_defconfig updates
  ARM: msm_defconfig: Enable restart driver
  defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974
  ARM: msm: Add support for APQ8074 Dragonboard
  ARM: exynos_defconfig: Enable S2MPS11 voltage regulator
  ARM: tegra: Enable DRM panel support
  ARM: shmobile: mackerel: Fix USBHS pinconf entry
  ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB
  ARM: shmobile: Let Lager multiplatform boot with Lager DTB
  ARM: shmobile: Remove non-multiplatform Koelsch reference support
  ARM: shmobile: Remove non-multiplatform Lager reference support
  ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT
  ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT
  ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization
  ARM: shmobile: lager-reference: Enable multiplaform kernel support
  ARM: shmobile: armadillo: Set backlight enable GPIO
  ARM: shmobile: Koelsch: add Ether support
  ...

Conflicts:
	arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
This commit is contained in:
Linus Torvalds 2014-01-23 18:48:28 -08:00
commit 903a9f77d1
75 changed files with 1902 additions and 3871 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/Kconfig
View File

@ -669,7 +669,7 @@ config ARCH_MSM_NODT
(clock and power control, etc).
config ARCH_SHMOBILE_LEGACY
bool "Renesas SH-Mobile / R-Mobile (non-multiplatform)"
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select CLKDEV_LOOKUP
@ -685,8 +685,9 @@ config ARCH_SHMOBILE_LEGACY
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms using
a non-multiplatform kernel.
Support for Renesas ARM SoC platforms using a non-multiplatform
kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
and RZ families.
config ARCH_RPC
bool "RiscPC"

17
arch/arm/boot/dts/Makefile
View File

@ -119,7 +119,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
@ -188,12 +189,19 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap2430-sdp.dtb \
omap2420-n800.dtb \
omap2420-n810.dtb \
omap2420-n810-wimax.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-cm-t3730.dtb \
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-ldp.dtb \
omap3-n900.dtb \
omap3-n9.dtb \
omap3-n950.dtb \
@ -233,6 +241,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r7s72100-genmai-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
@ -241,13 +250,15 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
r8a7779-marzen-reference.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
r8a7790-lager-reference.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
r8a73a4-ape6evm-reference.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai-reference.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \

29
arch/arm/boot/dts/am3517-evm.dts
View File

@ -17,6 +17,21 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vmmc_fixed: vmmc {
compatible = "regulator-fixed";
regulator-name = "vmmc_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&davinci_emac {
status = "okay";
};
&davinci_mdio {
status = "okay";
};
&i2c1 {
@ -30,3 +45,17 @@
&i2c3 {
clock-frequency = <400000>;
};
&mmc1 {
vmmc-supply = <&vmmc_fixed>;
bus-width = <4>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};

2
arch/arm/boot/dts/omap2.dtsi
View File

@ -145,7 +145,7 @@
compatible = "ti,omap2-rng";
ti,hwmods = "rng";
reg = <0x480a0000 0x50>;
interrupts = <36>;
interrupts = <52>;
};
sham: sham@480a4000 {

8
arch/arm/boot/dts/omap2420-n800.dts Normal file
View File

@ -0,0 +1,8 @@
/dts-v1/;
#include "omap2420-n8x0-common.dtsi"
/ {
model = "Nokia N800";
compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
};

8
arch/arm/boot/dts/omap2420-n810-wimax.dts Normal file
View File

@ -0,0 +1,8 @@
/dts-v1/;
#include "omap2420-n8x0-common.dtsi"
/ {
model = "Nokia N810 WiMax";
compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
};

8
arch/arm/boot/dts/omap2420-n810.dts Normal file
View File

@ -0,0 +1,8 @@
/dts-v1/;
#include "omap2420-n8x0-common.dtsi"
/ {
model = "Nokia N810";
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
};

99
arch/arm/boot/dts/omap2420-n8x0-common.dtsi Normal file
View File

@ -0,0 +1,99 @@
#include "omap2420.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
ocp {
i2c@0 {
compatible = "i2c-cbus-gpio";
gpios = <&gpio3 2 0 /* gpio66 clk */
&gpio3 1 0 /* gpio65 dat */
&gpio3 0 0 /* gpio64 sel */
>;
#address-cells = <1>;
#size-cells = <0>;
retu_mfd: retu@1 {
compatible = "retu-mfd";
interrupt-parent = <&gpio4>;
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
reg = <0x1>;
};
};
};
};
&i2c1 {
clock-frequency = <400000>;
};
&i2c2 {
clock-frequency = <400000>;
};
&gpmc {
ranges = <0 0 0x04000000 0x10000000>;
/* gpio-irq for dma: 26 */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x10000000>;
gpmc,sync-read;
gpmc,burst-length = <16>;
gpmc,burst-read;
gpmc,burst-wrap;
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <127>;
gpmc,cs-wr-off-ns = <109>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <18>;
gpmc,oe-on-ns = <27>;
gpmc,oe-off-ns = <127>;
gpmc,we-on-ns = <27>;
gpmc,we-off-ns = <72>;
gpmc,rd-cycle-ns = <145>;
gpmc,wr-cycle-ns = <136>;
gpmc,access-ns = <118>;
gpmc,page-burst-access-ns = <27>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <9>;
gpmc,sync-clk-ps = <27000>;
/* MTD partition table corresponding to old board-n8x0 file. */
partition@0 {
label = "bootloader";
reg = <0x00000000 0x00020000>;
read-only;
};
partition@1 {
label = "config";
reg = <0x00020000 0x00060000>;
};
partition@2 {
label = "kernel";
reg = <0x00080000 0x00200000>;
};
partition@3 {
label = "initfs";
reg = <0x00280000 0x00400000>;
};
partition@4 {
label = "rootfs";
reg = <0x00680000 0x0f980000>;
};
partition@5 {
label = "omap2-onenand";
reg = <0x00000000 0x10000000>;
};
};
};

49
arch/arm/boot/dts/omap2430-sdp.dts Normal file
View File

@ -0,0 +1,49 @@
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap2430.dtsi"
/ {
model = "TI OMAP2430 SDP";
compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
};
&i2c2 {
clock-frequency = <100000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
};
};
#include "twl4030.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
};
&gpmc {
ranges = <5 0 0x08000000 0x01000000>;
ethernet@gpmc {
compatible = "smsc,lan91c94";
interrupt-parent = <&gpio5>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
gpmc,mux-add-data;
};
};

40
arch/arm/boot/dts/omap3-beagle-xm.dts
View File

@ -99,7 +99,7 @@
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb2_pins
&hsusb2_pins
>;
uart3_pins: pinmux_uart3_pins {
@ -109,20 +109,32 @@
>;
};
hsusbb2_pins: pinmux_hsusbb2_pins {
hsusb2_pins: pinmux_hsusb2_pins {
pinctrl-single,pins = <
0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
>;
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <
&hsusb2_2_pins
>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};

40
arch/arm/boot/dts/omap3-beagle.dts
View File

@ -93,23 +93,17 @@
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb2_pins
&hsusb2_pins
>;
hsusbb2_pins: pinmux_hsusbb2_pins {
hsusb2_pins: pinmux_hsusb2_pins {
pinctrl-single,pins = <
0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
>;
};
@ -121,6 +115,24 @@
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <
&hsusb2_2_pins
>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
&i2c1 {
clock-frequency = <2600000>;

104
arch/arm/boot/dts/omap3-cm-t3730.dts Normal file
View File

@ -0,0 +1,104 @@
/*
* Support for CompuLab CM-T3730
*/
/dts-v1/;
#include "omap36xx.dtsi"
#include "omap3-cm-t3x30.dtsi"
/ {
model = "CompuLab CM-T3730";
compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
wl12xx_vmmc2: wl12xx_vmmc2 {
compatible = "regulator-fixed";
regulator-name = "vw1271";
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
startup-delay-us = <20000>;
enable-active-high;
};
wl12xx_vaux2: wl12xx_vaux2 {
compatible = "regulator-fixed";
regulator-name = "vwl1271_vaux2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vaux2>;
};
};
&omap3_pmx_core {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
smsc1_pins: pinmux_smsc1_pins {
pinctrl-single,pins = <
0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0xb2 (PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
0x134 (PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
>;
};
};
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
vmmc_aux-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
};
&smsc1 {
pinctrl-names = "default";
pinctrl-0 = <&smsc1_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};

95
arch/arm/boot/dts/omap3-cm-t3x30.dtsi Normal file
View File

@ -0,0 +1,95 @@
/*
* Common support for CompuLab CM-T3530 and CM-T3730
*/
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
leds {
compatible = "gpio-leds";
ledb {
label = "cm-t35:green";
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
linux,default-trigger = "heartbeat";
};
};
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a: regulator-vdd33a {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet@5,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
gpmc,we-on-ns = <54>;
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
};
&i2c1 {
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&i2c3 {
clock-frequency = <400000>;
};
&twl_gpio {
ti,use-leds;
};

2
arch/arm/boot/dts/omap3-igep.dtsi
View File

@ -133,8 +133,6 @@
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins { };
};
&i2c1 {

52
arch/arm/boot/dts/omap3-igep0020.dts
View File

@ -66,28 +66,10 @@
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
&tfp410_pins
&dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
0x5aa (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
0x5a8 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
tfp410_pins: tfp410_dvi_pins {
pinctrl-single,pins = <
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
@ -128,12 +110,36 @@
};
};
&leds_pins {
pinctrl-single,pins = <
0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
>;
};
};
&i2c3 {

10
arch/arm/boot/dts/omap3-igep0030.dts
View File

@ -46,10 +46,12 @@
};
};
&leds_pins {
pinctrl-single,pins = <
0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
>;
&omap3_pmx_core2 {
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
>;
};
};
&gpmc {

231
arch/arm/boot/dts/omap3-ldp.dts Normal file
View File

@ -0,0 +1,231 @@
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap34xx.dtsi"
#include "omap-gpmc-smsc911x.dtsi"
/ {
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
compatible = "ti,omap3-ldp", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_key_pins>;
key_enter {
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
linux,code = <0x0107001c>; /* KEY_ENTER */
gpio-key,wakeup;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
linux,code = <0x0303003b>; /* KEY_F1 */
gpio-key,wakeup;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
linux,code = <0x0403003c>; /* KEY_F2 */
gpio-key,wakeup;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
linux,code = <0x0503003d>; /* KEY_F3 */
gpio-key,wakeup;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
linux,code = <0x0704003e>; /* KEY_F4 */
gpio-key,wakeup;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
linux,code = <0x04070069>; /* KEY_LEFT */
gpio-key,wakeup;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
linux,code = <0x0507006a>; /* KEY_RIGHT */
gpio-key,wakeup;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
linux,code = <0x06070067>; /* KEY_UP */
gpio-key,wakeup;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
linux,code = <0x0707006c>; /* KEY_DOWN */
gpio-key,wakeup;
};
};
};
&gpmc {
ranges = <0 0 0x00000000 0x01000000>,
<1 0 0x08000000 0x01000000>;
nand@0,0 {
linux,mtd-name= "micron,nand";
reg = <0 0 0>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
partition@80000 {
label = "U-Boot";
reg = <0x80000 0x140000>;
};
partition@1c0000 {
label = "Environment";
reg = <0x1c0000 0x40000>;
};
partition@200000 {
label = "Kernel";
reg = <0x200000 0x1e00000>;
};
partition@2000000 {
label = "Filesystem";
reg = <0x2000000 0xe000000>;
};
};
ethernet@gpmc {
interrupt-parent = <&gpio5>;
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
reg = <1 0 0xff>;
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
};
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
};
&omap3_pmx_core {
gpio_key_pins: pinmux_gpio_key_pins {
pinctrl-single,pins = <
0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
>;
};
musb_pins: pinmux_musb_pins {
pinctrl-single,pins = <
0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
>;
};
};
&usb_otg_hs {
pinctrl-names = "default";
pinctrl-0 = <&musb_pins>;
interface-type = <0>;
usb-phy = <&usb2_phy>;
mode = <3>;
power = <50>;
};
&vaux1 {
/* Needed for ads7846 */
regulator-name = "vcc";
};
&vpll2 {
/* Needed for DSS */
regulator-name = "vdds_dsi";
};

40
arch/arm/boot/dts/omap3-sb-t35.dtsi Normal file
View File

@ -0,0 +1,40 @@
/*
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>;
smsc2: ethernet@4,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
interrupt-parent = <&gpio3>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
gpmc,we-on-ns = <54>;
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
};

30
arch/arm/boot/dts/omap3-sbc-t3730.dts Normal file
View File

@ -0,0 +1,30 @@
/*
* Suppport for CompuLab SBC-T3730 with CM-T3730
*/
#include "omap3-cm-t3730.dts"
#include "omap3-sb-t35.dtsi"
/ {
model = "CompuLab SBC-T3730 with CM-T3730";
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
};
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
&smsc2 {
pinctrl-names = "default";
pinctrl-0 = <&smsc2_pins>;
};
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
0x86 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
0xa2 (PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
>;
};
};

23
arch/arm/boot/dts/omap3-zoom3.dts
View File

@ -80,13 +80,8 @@
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
0x168 (PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */
0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
>;
};
@ -125,6 +120,18 @@
};
};
&omap3_pmx_core2 {
mmc3_2_pins: pinmux_mmc3_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
>;
};
};
&omap3_pmx_wkup {
wlan_host_wkup: pinmux_wlan_host_wkup_pins {
pinctrl-single,pins = <
@ -187,7 +194,7 @@
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
};
&uart1 {

2
arch/arm/boot/dts/omap3.dtsi
View File

@ -117,7 +117,7 @@
omap3_pmx_core: pinmux@48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x48002030 0x05cc>;
reg = <0x48002030 0x0238>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;

13
arch/arm/boot/dts/omap34xx.dtsi
View File

@ -25,4 +25,17 @@
clock-latency = <300000>; /* From legacy driver */
};
};
ocp {
omap3_pmx_core2: pinmux@480025d8 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025d8 0x24>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
};
};

11
arch/arm/boot/dts/omap36xx.dtsi
View File

@ -38,5 +38,16 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
omap3_pmx_core2: pinmux@480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
};
};

6
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts Normal file
View File

@ -0,0 +1,6 @@
#include "qcom-msm8974.dtsi"
/ {
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
};

31
arch/arm/boot/dts/r7s72100-genmai-reference.dts Normal file
View File

@ -0,0 +1,31 @@
/*
* Device Tree Source for the Genmai board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r7s72100.dtsi"
/ {
model = "Genmai";
compatible = "renesas,genmai-reference", "renesas,r7s72100";
chosen {
bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
};
memory {
device_type = "memory";
reg = <0x08000000 0x08000000>;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
};

3
arch/arm/configs/armadillo800eva_defconfig
View File

@ -105,6 +105,7 @@ CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_HDMI=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
@ -130,6 +131,8 @@ CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_PWM=y
CONFIG_PWM_RENESAS_TPU=y
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y

37
arch/arm/configs/bcm2835_defconfig
View File

@ -44,17 +44,26 @@ CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_WIRELESS is not set
CONFIG_NETFILTER=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_ZD1211RW=y
CONFIG_INPUT_EVDEV=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
@ -71,15 +80,13 @@ CONFIG_FB=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_USB_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM2835=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@ -88,6 +95,8 @@ CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_STAGING=y
CONFIG_USB_DWC2=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
@ -109,20 +118,20 @@ CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SCHED_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_TEST_KSTRTOX=y
CONFIG_KGDB=y
CONFIG_KGDB_KDB=y
CONFIG_TEST_KSTRTOX=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y

10
arch/arm/configs/bockw_defconfig
View File

@ -27,12 +27,12 @@ CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp"
CONFIG_CMDLINE_FORCE=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
@ -44,8 +44,6 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
@ -82,6 +80,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_I2C=y
CONFIG_I2C_RCAR=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
@ -108,11 +107,12 @@ CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_DMADEVICES=y
CONFIG_RCAR_HPB_DMAE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y

3
arch/arm/configs/exynos_defconfig
View File

@ -13,7 +13,7 @@ CONFIG_S3C24XX_PWM=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_MACH_EXYNOS4_DT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_NR_CPUS=8
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
@ -79,6 +79,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_FB=y

116
arch/arm/configs/genmai_defconfig Normal file
View File

@ -0,0 +1,116 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R7S72100=y
CONFIG_MACH_GENMAI=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=10
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/arm/configs/kirkwood_defconfig
View File

@ -27,6 +27,7 @@ CONFIG_PCI_MVEBU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CPU_FREQ=y

25
arch/arm/configs/koelsch_defconfig
View File

@ -29,7 +29,29 @@ CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_LEGACY_PTYS is not set
@ -45,10 +67,11 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_ARM_UNWIND is not set

1
arch/arm/configs/kzm9d_defconfig
View File

@ -32,6 +32,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y

3
arch/arm/configs/lager_defconfig
View File

@ -80,7 +80,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_RCAR=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_RCAR=y
@ -89,6 +89,7 @@ CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
# CONFIG_USB_SUPPORT is not set

10
arch/arm/configs/marzen_defconfig
View File

@ -30,12 +30,12 @@ CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
CONFIG_CMDLINE_FORCE=y
CONFIG_VFP=y
CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
@ -43,8 +43,6 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
@ -61,7 +59,6 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
@ -106,11 +103,12 @@ CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_RCAR_HPB_DMAE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y

3
arch/arm/configs/msm_defconfig
View File

@ -20,6 +20,7 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MSM_DT=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@ -86,6 +87,8 @@ CONFIG_SPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y

3
arch/arm/configs/multi_v7_defconfig
View File

@ -72,6 +72,7 @@ CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_KS8851=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_ICPLUS_PHY=y
CONFIG_MDIO_SUN4I=y
CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
@ -95,6 +96,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y

3
arch/arm/configs/mvebu_defconfig
View File

@ -55,6 +55,8 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_PXA3xx=y
CONFIG_SERIAL_8250_DW=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@ -69,6 +71,7 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_MMC=y
CONFIG_MMC_MVSDIO=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y

22
arch/arm/configs/tegra_defconfig
View File

@ -36,8 +36,8 @@ CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_KEXEC=y
@ -63,7 +63,6 @@ CONFIG_INET_ESP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
@ -85,7 +84,6 @@ CONFIG_RFKILL_GPIO=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_CMA=y
CONFIG_DMA_CMA=y
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
@ -114,6 +112,7 @@ CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
@ -132,6 +131,7 @@ CONFIG_SPI=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
@ -143,6 +143,9 @@ CONFIG_CHARGER_TPS65090=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
@ -151,6 +154,7 @@ CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_PALMAS=y
@ -164,7 +168,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
@ -187,6 +192,7 @@ CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
@ -211,6 +217,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
@ -256,16 +263,15 @@ CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_VM=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y

9
arch/arm/mach-msm/board-dt.c
View File

@ -26,7 +26,16 @@ static const char * const msm_dt_match[] __initconst = {
NULL
};
static const char * const apq8074_dt_match[] __initconst = {
"qcom,apq8074-dragonboard",
NULL
};
DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
.smp = smp_ops(msm_smp_ops),
.dt_compat = msm_dt_match,
MACHINE_END
DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
.dt_compat = apq8074_dt_match,
MACHINE_END

13
arch/arm/mach-omap2/Kconfig
View File

@ -192,19 +192,6 @@ config MACH_OMAP2_TUSB6010
depends on ARCH_OMAP2 && SOC_OMAP2420
default y if MACH_NOKIA_N8X0
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on SOC_OMAP2420
default y
select OMAP_DEBUG_DEVICES
select OMAP_PACKAGE_ZAF
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on SOC_OMAP2430
default y
select OMAP_PACKAGE_ZAC
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3

4
arch/arm/mach-omap2/Makefile
View File

@ -66,8 +66,6 @@ obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o
obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o
# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
# SMS/SDRC
@ -237,8 +235,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o

273
arch/arm/mach-omap2/board-2430sdp.c
View File

@ -1,273 +0,0 @@
/*
* linux/arch/arm/mach-omap2/board-2430sdp.c
*
* Copyright (C) 2006 Texas Instruments
*
* Modified from mach-omap2/board-generic.c
*
* Initial Code : Based on a patch from Komal Shah and Richard Woodruff
* Updated the Code for 2430 SDP : Syed Mohammed Khasim
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/usb/phy.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include "gpmc.h"
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#define SDP2430_CS0_BASE 0x04000000
#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data sdp2430_flash_data = {
.width = 2,
.parts = sdp2430_partitions,
.nr_parts = ARRAY_SIZE(sdp2430_partitions),
};
static struct resource sdp2430_flash_resource = {
.start = SDP2430_CS0_BASE,
.end = SDP2430_CS0_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device sdp2430_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &sdp2430_flash_data,
},
.num_resources = 1,
.resource = &sdp2430_flash_resource,
};
/* LCD */
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
static const struct display_timing sdp2430_lcd_videomode = {
.pixelclock = { 0, 5400000, 0 },
.hactive = { 0, 240, 0 },
.hfront_porch = { 0, 3, 0 },
.hback_porch = { 0, 39, 0 },
.hsync_len = { 0, 3, 0 },
.vactive = { 0, 320, 0 },
.vfront_porch = { 0, 2, 0 },
.vback_porch = { 0, 7, 0 },
.vsync_len = { 0, 1, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.display_timing = &sdp2430_lcd_videomode,
.enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO,
.backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
};
static struct platform_device sdp2430_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &sdp2430_lcd_pdata,
};
static struct omap_dss_board_info sdp2430_dss_data = {
.default_display_name = "lcd",
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
&sdp2430_lcd_device,
};
#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 5,
.gpio_irq = 149,
.flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
IORESOURCE_IRQ_LOWLEVEL,
};
static void __init board_smc91x_init(void)
{
omap_mux_init_gpio(149, OMAP_PIN_INPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
#else
static inline void board_smc91x_init(void)
{
}
#endif
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data sdp2430_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies),
.consumer_supplies = &sdp2430_vmmc1_supplies[0],
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
};
static struct twl4030_platform_data sdp2430_twldata = {
/* platform_data for children goes here */
.gpio = &sdp2430_gpio_data,
.vmmc1 = &sdp2430_vmmc1,
};
static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
.flags = I2C_CLIENT_WAKE,
},
};
static int __init omap2430_i2c_init(void)
{
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
&sdp2430_twldata);
return 0;
}
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ext_clock = 1,
},
{} /* Terminator */
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static void __init omap_2430sdp_init(void)
{
omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_hsmmc_init(mmc);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
/* Turn off secondary LCD backlight */
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
"Secondary LCD backlight");
omap_display_init(&sdp2430_dss_data);
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.init_late = omap2430_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END

365
arch/arm/mach-omap2/board-h4.c
View File

@ -1,365 +0,0 @@
/*
* linux/arch/arm/mach-omap2/board-h4.c
*
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Modified from mach-omap/omap1/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/platform_data/at24.h>
#include <linux/input.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/menelaus.h>
#include <linux/omap-dma.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include "common.h"
#include "mux.h"
#include "control.h"
#include "gpmc.h"
#include "gpmc-smc91x.h"
#define H4_FLASH_CS 0
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t board_matrix_keys[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
KEY(3, 0, KEY_B),
KEY(4, 0, KEY_C),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(2, 1, KEY_E),
KEY(3, 1, KEY_F),
KEY(4, 1, KEY_G),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_I),
KEY(2, 2, KEY_J),
KEY(3, 2, KEY_K),
KEY(4, 2, KEY_3),
KEY(0, 3, KEY_M),
KEY(1, 3, KEY_N),
KEY(2, 3, KEY_O),
KEY(3, 3, KEY_P),
KEY(4, 3, KEY_Q),
KEY(0, 4, KEY_R),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_T),
KEY(3, 4, KEY_U),
KEY(4, 4, KEY_ENTER),
KEY(0, 5, KEY_V),
KEY(1, 5, KEY_W),
KEY(2, 5, KEY_L),
KEY(3, 5, KEY_S),
KEY(4, 5, KEY_ENTER),
};
static const struct matrix_keymap_data board_keymap_data = {
.keymap = board_matrix_keys,
.keymap_size = ARRAY_SIZE(board_matrix_keys),
};
static unsigned int board_keypad_row_gpios[] = {
88, 89, 124, 11, 6, 96
};
static unsigned int board_keypad_col_gpios[] = {
90, 91, 100, 36, 12, 97, 98
};
static struct matrix_keypad_platform_data board_keypad_platform_data = {
.keymap_data = &board_keymap_data,
.row_gpios = board_keypad_row_gpios,
.num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
.col_gpios = board_keypad_col_gpios,
.num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
.active_low = 1,
.debounce_ms = 20,
.col_scan_delay_us = 5,
};
static struct platform_device board_keyboard = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &board_keypad_platform_data,
},
};
static void __init board_mkp_init(void)
{
omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
if (omap_has_menelaus()) {
omap_mux_init_signal("sdrc_a14.gpio0",
OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
omap_mux_init_signal("gpio_98", 0);
board_keypad_row_gpios[5] = 0;
board_keypad_col_gpios[2] = 15;
board_keypad_col_gpios[6] = 18;
} else {
omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("gpio_100", 0);
omap_mux_init_signal("gpio_98", 0);
}
omap_mux_init_signal("gpio_90", 0);
omap_mux_init_signal("gpio_91", 0);
omap_mux_init_signal("gpio_36", 0);
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
omap_mux_init_signal("gpio_97", 0);
platform_device_register(&board_keyboard);
}
#else
static inline void board_mkp_init(void)
{
}
#endif
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct physmap_flash_data h4_flash_data = {
.width = 2,
.parts = h4_partitions,
.nr_parts = ARRAY_SIZE(h4_partitions),
};
static struct resource h4_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device h4_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &h4_flash_data,
},
.num_resources = 1,
.resource = &h4_flash_resource,
};
static const struct display_timing cm_t35_lcd_videomode = {
.pixelclock = { 0, 6250000, 0 },
.hactive = { 0, 240, 0 },
.hfront_porch = { 0, 15, 0 },
.hback_porch = { 0, 60, 0 },
.hsync_len = { 0, 15, 0 },
.vactive = { 0, 320, 0 },
.vfront_porch = { 0, 1, 0 },
.vback_porch = { 0, 1, 0 },
.vsync_len = { 0, 1, 0 },
.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.display_timing = &cm_t35_lcd_videomode,
.enable_gpio = -1,
.backlight_gpio = -1,
};
static struct platform_device cm_t35_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &cm_t35_lcd_pdata,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&cm_t35_lcd_device,
};
static struct omap_dss_board_info h4_dss_data = {
.default_display_name = "lcd",
};
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
}
/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
*
* Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
* correctly. The macro needs to look at production_id not just hawkeye.
*/
static u32 is_gpmc_muxed(void)
{
u32 mux;
mux = get_sysboot_value();
if ((mux & 0xF) == 0xd)
return 1; /* NAND config (could be either) */
if (mux & 0x2) /* if mux'ed */
return 1;
else
return 0;
}
#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 1,
.gpio_irq = 92,
.flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
};
static void __init board_smc91x_init(void)
{
if (is_gpmc_muxed())
board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
#else
static inline void board_smc91x_init(void)
{
}
#endif
static void __init h4_init_flash(void)
{
unsigned long base;
if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
printk("Can't request GPMC CS for flash\n");
return;
}
h4_flash_resource.start = base;
h4_flash_resource.end = base + SZ_64M - 1;
}
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
};
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
.platform_data = &m24c01,
},
{ /* EEPROM on cpu card */
I2C_BOARD_INFO("24c01", 0x57),
.platform_data = &m24c01,
},
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static void __init omap_h4_init(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
board_mkp_init();
h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
board_smc91x_init();
omap_display_init(&h4_dss_data);
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END

240
arch/arm/mach-omap2/board-n8x0.c
View File

@ -21,7 +21,6 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/i2c-cbus-gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
@ -32,8 +31,7 @@
#include "common.h"
#include "mmc.h"
#include "mux.h"
#include "soc.h"
#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
@ -42,44 +40,30 @@
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
static struct i2c_cbus_platform_data n8x0_cbus_data = {
.clk_gpio = 66,
.dat_gpio = 65,
.sel_gpio = 64,
};
#define NOKIA_N810_WIMAX (1 << 2)
#define NOKIA_N810 (1 << 1)
#define NOKIA_N800 (1 << 0)
static struct platform_device n8x0_cbus_device = {
.name = "i2c-cbus-gpio",
.id = 3,
.dev = {
.platform_data = &n8x0_cbus_data,
},
};
static u32 board_caps;
static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = {
{
I2C_BOARD_INFO("retu-mfd", 0x01),
},
};
#define board_is_n800() (board_caps & NOKIA_N800)
#define board_is_n810() (board_caps & NOKIA_N810)
#define board_is_n810_wimax() (board_caps & NOKIA_N810_WIMAX)
static void __init n8x0_cbus_init(void)
static void board_check_revision(void)
{
const int retu_irq_gpio = 108;
if (of_have_populated_dt()) {
if (of_machine_is_compatible("nokia,n800"))
board_caps = NOKIA_N800;
else if (of_machine_is_compatible("nokia,n810"))
board_caps = NOKIA_N810;
else if (of_machine_is_compatible("nokia,n810-wimax"))
board_caps = NOKIA_N810_WIMAX;
}
if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
return;
irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio);
i2c_register_board_info(3, n8x0_i2c_board_info_3,
ARRAY_SIZE(n8x0_i2c_board_info_3));
platform_device_register(&n8x0_cbus_device);
if (!board_caps)
pr_err("Unknown board\n");
}
#else /* CONFIG_I2C_CBUS_GPIO */
static void __init n8x0_cbus_init(void)
{
}
#endif /* CONFIG_I2C_CBUS_GPIO */
#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/*
@ -178,49 +162,6 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
},
};
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
static struct mtd_partition onenand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x20000,
.mask_flags = MTD_WRITEABLE, /* Force read-only */
},
{
.name = "config",
.offset = MTDPART_OFS_APPEND,
.size = 0x60000,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0x200000,
},
{
.name = "initfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x400000,
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_onenand_platform_data board_onenand_data[] = {
{
.cs = 0,
.gpio_irq = 26,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READ,
}
};
#endif
#if defined(CONFIG_MENELAUS) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
@ -342,7 +283,7 @@ static void n810_set_power_emmc(struct device *dev,
static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (machine_is_nokia_n800() || slot == 0)
if (board_is_n800() || slot == 0)
return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
n810_set_power_emmc(dev, power_on);
@ -388,7 +329,7 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
{
int bit, *openp, index;
if (machine_is_nokia_n800()) {
if (board_is_n800()) {
bit = 1 << 1;
openp = &slot2_cover_open;
index = 1;
@ -421,7 +362,7 @@ static int n8x0_mmc_late_init(struct device *dev)
if (r < 0)
return r;
if (machine_is_nokia_n800())
if (board_is_n800())
vs2sel = 0;
else
vs2sel = 2;
@ -444,7 +385,7 @@ static int n8x0_mmc_late_init(struct device *dev)
if (r < 0)
return r;
if (machine_is_nokia_n800()) {
if (board_is_n800()) {
bit = 1 << 1;
openp = &slot2_cover_open;
} else {
@ -471,7 +412,7 @@ static void n8x0_mmc_shutdown(struct device *dev)
{
int vs2sel;
if (machine_is_nokia_n800())
if (board_is_n800())
vs2sel = 0;
else
vs2sel = 2;
@ -486,7 +427,7 @@ static void n8x0_mmc_cleanup(struct device *dev)
gpio_free(N8X0_SLOT_SWITCH_GPIO);
if (machine_is_nokia_n810()) {
if (board_is_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
gpio_free(N810_EMMC_VIO_GPIO);
}
@ -497,7 +438,7 @@ static void n8x0_mmc_cleanup(struct device *dev)
* MMC controller2 is not in use.
*/
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 2,
.nr_slots = 0,
.switch_slot = n8x0_mmc_switch_slot,
.init = n8x0_mmc_late_init,
.cleanup = n8x0_mmc_cleanup,
@ -537,7 +478,7 @@ static void __init n8x0_mmc_init(void)
{
int err;
if (machine_is_nokia_n810()) {
if (board_is_n810()) {
mmc1_data.slots[0].name = "external";
/*
@ -555,7 +496,7 @@ static void __init n8x0_mmc_init(void)
if (err)
return;
if (machine_is_nokia_n810()) {
if (board_is_n810()) {
err = gpio_request_array(n810_emmc_gpios,
ARRAY_SIZE(n810_emmc_gpios));
if (err) {
@ -564,11 +505,11 @@ static void __init n8x0_mmc_init(void)
}
}
mmc1_data.nr_slots = 2;
mmc_data[0] = &mmc1_data;
omap242x_init_mmc(mmc_data);
}
#else
static struct omap_mmc_platform_data mmc1_data;
void __init n8x0_mmc_init(void)
{
}
@ -650,109 +591,32 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
},
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_MUX_MODE0,
.idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */
},
};
static inline void board_serial_init(void)
static int __init n8x0_late_initcall(void)
{
struct omap_board_data bdata;
if (!board_caps)
return -ENODEV;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
omap_serial_init_port(&bdata, NULL);
bdata.id = 1;
omap_serial_init_port(&bdata, NULL);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
omap_serial_init_port(&bdata, NULL);
}
#else
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
static void __init n8x0_init_machine(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
omap_register_i2c_bus(2, 400, NULL, 0);
if (machine_is_nokia_n810())
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
n8x0_cbus_init();
return 0;
}
omap_late_initcall(n8x0_late_initcall);
MACHINE_START(NOKIA_N800, "Nokia N800")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
/*
* Legacy init pdata init for n8x0. Note that we want to follow the
* I2C bus numbering starting at 0 for device tree like other omaps.
*/
void * __init n8x0_legacy_init(void)
{
board_check_revision();
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
i2c_register_board_info(0, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
if (board_is_n810())
i2c_register_board_info(1, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
MACHINE_START(NOKIA_N810, "Nokia N810")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
return &mmc1_data;
}

1
arch/arm/mach-omap2/common-board-devices.h
View File

@ -10,5 +10,6 @@ struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
void *n8x0_legacy_init(void);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */

1
arch/arm/mach-omap2/common.h
View File

@ -293,6 +293,7 @@ static inline void omap4_cpu_resume(void)
#endif
void pdata_quirks_init(struct of_device_id *);
void omap_auxdata_legacy_init(struct device *dev);
void omap_pcs_legacy_init(int irq, void (*rearm)(void));
struct omap_sdrc_params;

69
arch/arm/mach-omap2/msdi.c
View File

@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh)
return 0;
}
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
*mmc_controller)
{
if ((mmc_controller->slots[0].switch_pin > 0) && \
(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
if ((mmc_controller->slots[0].gpio_wp > 0) && \
(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc_cmd", 0);
omap_mux_init_signal("sdmmc_clki", 0);
omap_mux_init_signal("sdmmc_clko", 0);
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
omap_mux_init_signal("sdmmc_dat_dir1", 0);
omap_mux_init_signal("sdmmc_dat_dir2", 0);
omap_mux_init_signal("sdmmc_dat_dir3", 0);
}
/*
* Use internal loop-back in MMC/SDIO Module Input Clock
* selection
*/
if (mmc_controller->slots[0].internal_clock) {
u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
struct platform_device *pdev;
struct omap_hwmod *oh;
int id = 0;
char *oh_name = "msdi1";
char *dev_name = "mmci-omap";
if (!mmc_data[0]) {
pr_err("%s fails: Incomplete platform data\n", __func__);
return;
}
omap242x_mmc_mux(mmc_data[0]);
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
return;
}
pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
sizeof(struct omap_mmc_platform_data));
if (IS_ERR(pdev))
WARN(1, "Can'd build omap_device for %s:%s.\n",
dev_name, oh->name);
}
#endif

2
arch/arm/mach-omap2/mux.h
View File

@ -7,8 +7,6 @@
* published by the Free Software Foundation.
*/
#include "mux2420.h"
#include "mux2430.h"
#include "mux34xx.h"
#define OMAP_MUX_TERMINATOR 0xffff

690
arch/arm/mach-omap2/mux2420.c
View File

@ -1,690 +0,0 @@
/*
* Copyright (C) 2010 Nokia
* Copyright (C) 2010 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include "mux.h"
#ifdef CONFIG_OMAP_MUX
#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
.muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
}
#else
#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
}
#endif
#define _OMAP2420_BALLENTRY(M0, bb, bt) \
{ \
.reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
.balls = { bb, bt }, \
}
/*
* Superset of all mux modes for omap2420
*/
static struct omap_mux __initdata omap2420_muxmodes[] = {
_OMAP2420_MUXENTRY(CAM_D0, 54,
"cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
NULL, NULL, "etk_d2", NULL),
_OMAP2420_MUXENTRY(CAM_D1, 53,
"cam_d1", "hw_dbg3", "sti_din", "gpio_53",
NULL, NULL, "etk_d3", NULL),
_OMAP2420_MUXENTRY(CAM_D2, 52,
"cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
NULL, NULL, "etk_d4", NULL),
_OMAP2420_MUXENTRY(CAM_D3, 51,
"cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
NULL, NULL, "etk_d5", NULL),
_OMAP2420_MUXENTRY(CAM_D4, 50,
"cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
NULL, NULL, "etk_d6", NULL),
_OMAP2420_MUXENTRY(CAM_D5, 49,
"cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
NULL, NULL, "etk_d7", NULL),
_OMAP2420_MUXENTRY(CAM_D6, 0,
"cam_d6", "hw_dbg8", NULL, NULL,
NULL, NULL, "etk_d8", NULL),
_OMAP2420_MUXENTRY(CAM_D7, 0,
"cam_d7", "hw_dbg9", NULL, NULL,
NULL, NULL, "etk_d9", NULL),
_OMAP2420_MUXENTRY(CAM_D8, 54,
"cam_d8", "hw_dbg10", NULL, "gpio_54",
NULL, NULL, "etk_d10", NULL),
_OMAP2420_MUXENTRY(CAM_D9, 53,
"cam_d9", "hw_dbg11", NULL, "gpio_53",
NULL, NULL, "etk_d11", NULL),
_OMAP2420_MUXENTRY(CAM_HS, 55,
"cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
NULL, NULL, "etk_d1", NULL),
_OMAP2420_MUXENTRY(CAM_LCLK, 57,
"cam_lclk", NULL, "mcbsp_clks", "gpio_57",
NULL, NULL, "etk_c1", NULL),
_OMAP2420_MUXENTRY(CAM_VS, 56,
"cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
NULL, NULL, "etk_d0", NULL),
_OMAP2420_MUXENTRY(CAM_XCLK, 0,
"cam_xclk", NULL, "sti_clk", NULL,
NULL, NULL, "etk_c2", NULL),
_OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA10, 40,
"dss_data10", NULL, NULL, "gpio_40",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA11, 41,
"dss_data11", NULL, NULL, "gpio_41",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA12, 42,
"dss_data12", NULL, NULL, "gpio_42",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA13, 43,
"dss_data13", NULL, NULL, "gpio_43",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA14, 44,
"dss_data14", NULL, NULL, "gpio_44",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA15, 45,
"dss_data15", NULL, NULL, "gpio_45",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA16, 46,
"dss_data16", NULL, NULL, "gpio_46",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA17, 47,
"dss_data17", NULL, NULL, "gpio_47",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA8, 38,
"dss_data8", NULL, NULL, "gpio_38",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(DSS_DATA9, 39,
"dss_data9", NULL, NULL, "gpio_39",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
"eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
"eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_FS, 114,
"eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
"eac_ac_mclk", NULL, NULL, "gpio_117",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_RST, 118,
"eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
"eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
"eac_bt_din", NULL, NULL, "gpio_73",
NULL, NULL, "etk_d9", NULL),
_OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
"eac_bt_dout", NULL, "sti_clk", "gpio_74",
NULL, NULL, "etk_d8", NULL),
_OMAP2420_MUXENTRY(EAC_BT_FS, 72,
"eac_bt_fs", NULL, NULL, "gpio_72",
NULL, NULL, "etk_d10", NULL),
_OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
"eac_bt_sclk", NULL, NULL, "gpio_71",
NULL, NULL, "etk_d11", NULL),
_OMAP2420_MUXENTRY(GPIO_119, 119,
"gpio_119", NULL, "sti_din", "gpio_119",
NULL, "sys_boot0", "etk_d12", NULL),
_OMAP2420_MUXENTRY(GPIO_120, 120,
"gpio_120", NULL, "sti_dout", "gpio_120",
"cam_d9", "sys_boot1", "etk_d13", NULL),
_OMAP2420_MUXENTRY(GPIO_121, 121,
"gpio_121", NULL, NULL, "gpio_121",
"jtag_emu2", "sys_boot2", "etk_d14", NULL),
_OMAP2420_MUXENTRY(GPIO_122, 122,
"gpio_122", NULL, NULL, "gpio_122",
"jtag_emu3", "sys_boot3", "etk_d15", NULL),
_OMAP2420_MUXENTRY(GPIO_124, 124,
"gpio_124", NULL, NULL, "gpio_124",
NULL, "sys_boot5", NULL, NULL),
_OMAP2420_MUXENTRY(GPIO_125, 125,
"gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPIO_36, 36,
"gpio_36", NULL, NULL, "gpio_36",
NULL, "sys_boot4", NULL, NULL),
_OMAP2420_MUXENTRY(GPIO_62, 62,
"gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPIO_6, 6,
"gpio_6", "tv_detpulse", NULL, "gpio_6",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A10, 3,
"gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A1, 12,
"gpmc_a1", "dss_data18", NULL, "gpio_12",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A2, 11,
"gpmc_a2", "dss_data19", NULL, "gpio_11",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A3, 10,
"gpmc_a3", "dss_data20", NULL, "gpio_10",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A4, 9,
"gpmc_a4", "dss_data21", NULL, "gpio_9",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A5, 8,
"gpmc_a5", "dss_data22", NULL, "gpio_8",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A6, 7,
"gpmc_a6", "dss_data23", NULL, "gpio_7",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A7, 6,
"gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A8, 5,
"gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_A9, 4,
"gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_CLK, 21,
"gpmc_clk", NULL, NULL, "gpio_21",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D10, 18,
"gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D11, 17,
"gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D12, 16,
"gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D13, 15,
"gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D14, 14,
"gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D15, 13,
"gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D8, 20,
"gpmc_d8", NULL, NULL, "gpio_20",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_D9, 19,
"gpmc_d9", "ssi2_wake", NULL, "gpio_19",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NBE0, 29,
"gpmc_nbe0", NULL, NULL, "gpio_29",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NBE1, 30,
"gpmc_nbe1", NULL, NULL, "gpio_30",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS1, 22,
"gpmc_ncs1", NULL, NULL, "gpio_22",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS2, 23,
"gpmc_ncs2", NULL, NULL, "gpio_23",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS3, 24,
"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS4, 25,
"gpmc_ncs4", NULL, NULL, "gpio_25",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS5, 26,
"gpmc_ncs5", NULL, NULL, "gpio_26",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS6, 27,
"gpmc_ncs6", NULL, NULL, "gpio_27",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NCS7, 28,
"gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_NWP, 31,
"gpmc_nwp", NULL, NULL, "gpio_31",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
"gpmc_wait1", NULL, NULL, "gpio_33",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
"gpmc_wait2", NULL, NULL, "gpio_34",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
"gpmc_wait3", NULL, NULL, "gpio_35",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(HDQ_SIO, 101,
"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(I2C2_SCL, 99,
"i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(I2C2_SDA, 100,
"i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(JTAG_EMU0, 127,
"jtag_emu0", NULL, NULL, "gpio_127",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(JTAG_EMU1, 126,
"jtag_emu1", NULL, NULL, "gpio_126",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
"mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
"mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_DR, 95,
"mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_DX, 94,
"mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
"mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
"spi2_ncs1", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
"mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP2_DR, 11,
"mcbsp2_dr", NULL, "dss_data22", "gpio_11",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
"mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_CLKI, 59,
"sdmmc_clki", "ms_clki", NULL, "gpio_59",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_CLKO, 0,
"sdmmc_clko", "ms_clko", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
"sdmmc_cmd_dir", NULL, NULL, "gpio_8",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_CMD, 0,
"sdmmc_cmd", "ms_bs", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
"sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT0, 0,
"sdmmc_dat0", "ms_dat0", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
"sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT1, 75,
"sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
"sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT2, 76,
"sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
"sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(MMC_DAT3, 77,
"sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SDRC_A12, 2,
"sdrc_a12", NULL, NULL, "gpio_2",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SDRC_A13, 1,
"sdrc_a13", NULL, NULL, "gpio_1",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SDRC_A14, 0,
"sdrc_a14", NULL, NULL, "gpio_0",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SDRC_CKE1, 38,
"sdrc_cke1", NULL, NULL, "gpio_38",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SDRC_NCS1, 37,
"sdrc_ncs1", NULL, NULL, "gpio_37",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_CLK, 81,
"spi1_clk", NULL, NULL, "gpio_81",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_NCS0, 84,
"spi1_ncs0", NULL, NULL, "gpio_84",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_NCS1, 85,
"spi1_ncs1", NULL, NULL, "gpio_85",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_NCS2, 86,
"spi1_ncs2", NULL, NULL, "gpio_86",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_NCS3, 87,
"spi1_ncs3", NULL, NULL, "gpio_87",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_SIMO, 82,
"spi1_simo", NULL, NULL, "gpio_82",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI1_SOMI, 83,
"spi1_somi", NULL, NULL, "gpio_83",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI2_CLK, 88,
"spi2_clk", NULL, NULL, "gpio_88",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI2_NCS0, 91,
"spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI2_SIMO, 89,
"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SPI2_SOMI, 90,
"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
"ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
"ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
"ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SSI1_WAKE, 66,
"ssi1_wake", "eac_md_fs", NULL, "gpio_66",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
"sys_clkout", NULL, NULL, "gpio_123",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
"sys_clkreq", NULL, NULL, "gpio_52",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(SYS_NIRQ, 60,
"sys_nirq", NULL, NULL, "gpio_60",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART1_CTS, 32,
"uart1_cts", NULL, "dss_data18", "gpio_32",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART1_RTS, 8,
"uart1_rts", NULL, "dss_data19", "gpio_8",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART1_RX, 10,
"uart1_rx", NULL, "dss_data21", "gpio_10",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART1_TX, 9,
"uart1_tx", NULL, "dss_data20", "gpio_9",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART2_CTS, 67,
"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART2_RTS, 68,
"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART2_RX, 70,
"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART2_TX, 69,
"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
"uart3_rx_irrx", NULL, NULL, "gpio_105",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_DAT, 112,
"usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
"uart2_tx", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_PUEN, 106,
"usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_RCV, 109,
"usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
"uart2_cts", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_SE0, 111,
"usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
"uart2_rx", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_TXEN, 110,
"usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_VM, 108,
"usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
"uart2_rx", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(USB0_VP, 107,
"usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
"vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
"vlynq_nla", NULL, NULL, "gpio_58",
"cam_d6", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
"vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
"cam_d7", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
"vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
"cam_d8", NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
"vlynq_tx0", "usb2_txen", NULL, "gpio_17",
NULL, NULL, NULL, NULL),
_OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
"vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
NULL, NULL, NULL, NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
/*
* Balls for 447-pin POP package
*/
#ifdef CONFIG_DEBUG_FS
static struct omap_ball __initdata omap2420_pop_ball[] = {
_OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
_OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
_OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
_OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
_OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
_OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
_OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
_OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
_OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
_OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
_OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
_OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
_OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
_OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
_OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
_OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
_OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
_OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
_OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
_OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
_OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
_OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
_OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
_OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
_OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
_OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
_OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
_OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
_OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
_OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
_OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
_OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
_OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
_OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
_OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
_OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
_OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
_OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
_OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
_OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
_OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
_OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
_OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
_OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
_OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
_OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
_OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
_OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
_OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
_OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
_OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
_OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
_OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
_OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
_OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
_OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
_OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
_OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
_OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
_OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
_OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
_OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
_OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
_OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
_OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
_OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
_OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
_OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
_OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
_OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
_OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
_OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
_OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
_OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
_OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
_OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
_OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
_OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
_OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
_OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
_OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
_OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
_OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
_OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
_OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
_OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
_OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
_OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
_OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
_OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
_OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
_OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
_OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
_OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
_OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
_OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
_OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
_OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
_OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
_OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
_OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
_OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
_OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
_OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
_OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
_OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
_OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
_OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
_OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
_OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
_OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
_OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
_OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
_OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
_OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
_OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
_OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
_OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
_OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
_OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
_OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
_OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
_OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
_OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
_OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
_OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
_OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
_OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
_OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
_OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
_OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
_OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
_OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
_OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
_OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
_OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
_OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
_OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
_OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
_OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
_OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
_OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
_OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
_OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
_OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
_OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
_OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
_OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap2420_pop_ball NULL
#endif
int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
{
struct omap_ball *package_balls = NULL;
switch (flags & OMAP_PACKAGE_MASK) {
case OMAP_PACKAGE_ZAC:
package_balls = omap2420_pop_ball;
break;
case OMAP_PACKAGE_ZAF:
/* REVISIT: Please add data */
default:
pr_warning("%s: No ball data available for omap2420 package\n",
__func__);
}
return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
OMAP2420_CONTROL_PADCONF_MUX_PBASE,
OMAP2420_CONTROL_PADCONF_MUX_SIZE,
omap2420_muxmodes, NULL, board_subset,
package_balls);
}

282
arch/arm/mach-omap2/mux2420.h
View File

@ -1,282 +0,0 @@
/*
* Copyright (C) 2009 Nokia
* Copyright (C) 2009 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define OMAP2420_CONTROL_PADCONF_MUX_PBASE 0x48000030LU
#define OMAP2420_MUX(mode0, mux_value) \
{ \
.reg_offset = (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET), \
.value = (mux_value), \
}
/*
* OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
*
* Extracted from the TRM. Add 0x48000030 to these values to get the
* absolute addresses. The name in the macro is the mode-0 name of
* the pin. NOTE: These registers are 8-bits wide.
*/
#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET 0x000
#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET 0x001
#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET 0x002
#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x003
#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x004
#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET 0x005
#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET 0x006
#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET 0x007
#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET 0x008
#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET 0x009
#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET 0x00a
#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET 0x00b
#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET 0x00c
#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET 0x00d
#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET 0x00e
#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET 0x00f
#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET 0x010
#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET 0x021
#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET 0x022
#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET 0x023
#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET 0x024
#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET 0x025
#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET 0x026
#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET 0x027
#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET 0x028
#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET 0x029
#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02a
#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02b
#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET 0x02c
#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET 0x02d
#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET 0x02e
#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET 0x02f
#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET 0x030
#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET 0x031
#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET 0x032
#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET 0x033
#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET 0x034
#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET 0x035
#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET 0x036
#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET 0x037
#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET 0x038
#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET 0x039
#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET 0x03a
#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET 0x03b
#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET 0x03c
#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET 0x03d
#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET 0x03e
#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET 0x03f
#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET 0x040
#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET 0x041
#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET 0x042
#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET 0x043
#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET 0x044
#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET 0x045
#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET 0x046
#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET 0x047
#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET 0x048
#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET 0x049
#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a
#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET 0x04b
#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET 0x04c
#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET 0x04d
#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET 0x04e
#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET 0x04f
#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET 0x050
#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET 0x051
#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET 0x052
#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET 0x053
#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET 0x054
#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET 0x055
#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET 0x056
#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET 0x057
#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET 0x058
#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET 0x059
#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05a
#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x05b
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x05c
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x05d
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x05e
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x05f
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x060
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x061
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x062
#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x063
#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET 0x064
#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x065
#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x066
#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET 0x067
#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x068
#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x069
#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x06a
#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x06b
#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x06c
#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x06d
#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x06e
#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x06f
#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x070
#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x071
#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x072
#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x073
#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x074
#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x075
#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x076
#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x077
#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x078
#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x079
#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x07a
#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x07f
#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x080
#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x081
#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x082
#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x083
#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x084
#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x085
#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x086
#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x087
#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x088
#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x089
#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x08a
#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x08b
#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x08c
#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x08d
#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x08e
#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x08f
#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x090
#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x091
#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x092
#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x093
#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x094
#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET 0x095
#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET 0x096
#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET 0x097
#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET 0x098
#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x099
#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x09a
#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET 0x09b
#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x09c
#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x09d
#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x09e
#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET 0x09f
#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a0
#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a1
#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a2
#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a3
#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a4
#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET 0x0a5
#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET 0x0a6
#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET 0x0a7
#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET 0x0a8
#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET 0x0a9
#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET 0x0aa
#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0ab
#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0ac
#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0ad
#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0ae
#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0af
#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET 0x0b0
#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0b1
#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0b2
#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0b3
#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0b4
#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET 0x0b5
#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET 0x0b6
#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET 0x0b7
#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET 0x0b8
#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET 0x0b9
#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET 0x0ba
#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0bb
#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0bc
#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET 0x0bd
#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET 0x0be
#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET 0x0bf
#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET 0x0c0
#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET 0x0c1
#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET 0x0c2
#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET 0x0c3
#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET 0x0c4
#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET 0x0c5
#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET 0x0c6
#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET 0x0c7
#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET 0x0c8
#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET 0x0c9
#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET 0x0ca
#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET 0x0cb
#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET 0x0cc
#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET 0x0cd
#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET 0x0ce
#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0cf
#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0d0
#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0d1
#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET 0x0d2
#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET 0x0d3
#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET 0x0d4
#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET 0x0d5
#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0d6
#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0d7
#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0d8
#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET 0x0d9
#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0da
#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0db
#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0dc
#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0dd
#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0de
#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0df
#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0e0
#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0e1
#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0e2
#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0e3
#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0e4
#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0e5
#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0e6
#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0e7
#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0e8
#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0e9
#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET 0x0ea
#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET 0x0eb
#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET 0x0ec
#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET 0x0ed
#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET 0x0ee
#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET 0x0ef
#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET 0x0f0
#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET 0x0f1
#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET 0x0f2
#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET 0x0f3
#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET 0x0f4
#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET 0x0f5
#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET 0x0f6
#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET 0x0f7
#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET 0x0f8
#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET 0x0f9
#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x0fa
#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x0fb
#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x0fc
#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET 0x0fd
#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET 0x0fe
#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET 0x0ff
#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET 0x100
#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET 0x101
#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET 0x102
#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x103
#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x104
#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET 0x105
#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x106
#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x107
#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET 0x108
#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET 0x109
#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET 0x10a
#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x10b
#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x10c
#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x10d
#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x10e
#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x10f
#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x110
#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x111
#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x112
#define OMAP2420_CONTROL_PADCONF_MUX_SIZE \
(OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)

793
arch/arm/mach-omap2/mux2430.c
View File

@ -1,793 +0,0 @@
/*
* Copyright (C) 2010 Nokia
* Copyright (C) 2010 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include "mux.h"
#ifdef CONFIG_OMAP_MUX
#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
.muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
}
#else
#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
}
#endif
#define _OMAP2430_BALLENTRY(M0, bb, bt) \
{ \
.reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
.balls = { bb, bt }, \
}
/*
* Superset of all mux modes for omap2430
*/
static struct omap_mux __initdata omap2430_muxmodes[] = {
_OMAP2430_MUXENTRY(CAM_D0, 133,
"cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
NULL, NULL, "etk_d2", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D10, 146,
"cam_d10", NULL, NULL, "gpio_146",
NULL, NULL, "etk_d12", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D11, 145,
"cam_d11", NULL, NULL, "gpio_145",
NULL, NULL, "etk_d13", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D1, 132,
"cam_d1", "hw_dbg1", "sti_din", "gpio_132",
NULL, NULL, "etk_d3", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D2, 129,
"cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
NULL, NULL, "etk_d4", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D3, 128,
"cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
NULL, NULL, "etk_d5", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D4, 143,
"cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
NULL, NULL, "etk_d6", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D5, 112,
"cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
NULL, NULL, "etk_d7", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D6, 137,
"cam_d6", "hw_dbg6", NULL, "gpio_137",
NULL, NULL, "etk_d8", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D7, 136,
"cam_d7", "hw_dbg7", NULL, "gpio_136",
NULL, NULL, "etk_d9", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D8, 135,
"cam_d8", "hw_dbg8", NULL, "gpio_135",
NULL, NULL, "etk_d10", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_D9, 134,
"cam_d9", "hw_dbg9", NULL, "gpio_134",
NULL, NULL, "etk_d11", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_HS, 11,
"cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
NULL, NULL, "etk_d1", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_LCLK, 0,
"cam_lclk", NULL, "mcbsp_clks", NULL,
NULL, NULL, "etk_c1", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_VS, 12,
"cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
NULL, NULL, "etk_d0", "safe_mode"),
_OMAP2430_MUXENTRY(CAM_XCLK, 0,
"cam_xclk", NULL, "sti_clk", NULL,
NULL, NULL, "etk_c2", NULL),
_OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA0, 40,
"dss_data0", "uart1_cts", NULL, "gpio_40",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA10, 128,
"dss_data10", "sdi_data1n", NULL, "gpio_128",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA11, 129,
"dss_data11", "sdi_data1p", NULL, "gpio_129",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA12, 130,
"dss_data12", "sdi_data2n", NULL, "gpio_130",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA13, 131,
"dss_data13", "sdi_data2p", NULL, "gpio_131",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA14, 132,
"dss_data14", "sdi_data3n", NULL, "gpio_132",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA15, 133,
"dss_data15", "sdi_data3p", NULL, "gpio_133",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA16, 46,
"dss_data16", NULL, NULL, "gpio_46",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA17, 47,
"dss_data17", NULL, NULL, "gpio_47",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA1, 41,
"dss_data1", "uart1_rts", NULL, "gpio_41",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA2, 42,
"dss_data2", "uart1_tx", NULL, "gpio_42",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA3, 43,
"dss_data3", "uart1_rx", NULL, "gpio_43",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA4, 44,
"dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA5, 45,
"dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA6, 144,
"dss_data6", NULL, NULL, "gpio_144",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA7, 147,
"dss_data7", NULL, NULL, "gpio_147",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA8, 38,
"dss_data8", NULL, NULL, "gpio_38",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_DATA9, 39,
"dss_data9", NULL, NULL, "gpio_39",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(DSS_HSYNC, 110,
"dss_hsync", NULL, NULL, "gpio_110",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_113, 113,
"gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_114, 114,
"gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_115, 115,
"gpio_115", "mcbsp2_dr", NULL, "gpio_115",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_116, 116,
"gpio_116", "mcbsp2_dx", NULL, "gpio_116",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_128, 128,
"gpio_128", NULL, "sti_din", "gpio_128",
NULL, "sys_boot0", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_129, 129,
"gpio_129", NULL, "sti_dout", "gpio_129",
NULL, "sys_boot1", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_130, 130,
"gpio_130", NULL, NULL, "gpio_130",
"jtag_emu2", "sys_boot2", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_131, 131,
"gpio_131", NULL, NULL, "gpio_131",
"jtag_emu3", "sys_boot3", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_132, 132,
"gpio_132", NULL, NULL, "gpio_132",
NULL, "sys_boot4", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_133, 133,
"gpio_133", NULL, NULL, "gpio_133",
NULL, "sys_boot5", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_134, 134,
"gpio_134", "ccp_datn", NULL, "gpio_134",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_135, 135,
"gpio_135", "ccp_datp", NULL, "gpio_135",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_136, 136,
"gpio_136", "ccp_clkn", NULL, "gpio_136",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_137, 137,
"gpio_137", "ccp_clkp", NULL, "gpio_137",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_138, 138,
"gpio_138", "spi3_clk", NULL, "gpio_138",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_139, 139,
"gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_140, 140,
"gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
NULL, NULL, "etk_d14", "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_141, 141,
"gpio_141", "spi3_somi", NULL, "gpio_141",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_142, 142,
"gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
NULL, NULL, "etk_d15", "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_148, 148,
"gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_149, 149,
"gpio_149", "mcbsp5_dx", NULL, "gpio_149",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_150, 150,
"gpio_150", "mcbsp5_dr", NULL, "gpio_150",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_151, 151,
"gpio_151", "sys_pwrok", NULL, "gpio_151",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_152, 152,
"gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_153, 153,
"gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_154, 154,
"gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_63, 63,
"gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_78, 78,
"gpio_78", NULL, "uart2_rts", "gpio_78",
"uart3_rts_sd", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_79, 79,
"gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
"uart3_tx_irtx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_7, 7,
"gpio_7", NULL, "uart2_cts", "gpio_7",
"uart3_cts_rctx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPIO_80, 80,
"gpio_80", NULL, "uart2_rx", "gpio_80",
"uart3_rx_irrx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A10, 3,
"gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A1, 31,
"gpmc_a1", NULL, NULL, "gpio_31",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A2, 30,
"gpmc_a2", NULL, NULL, "gpio_30",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A3, 29,
"gpmc_a3", NULL, NULL, "gpio_29",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A4, 49,
"gpmc_a4", NULL, NULL, "gpio_49",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A5, 53,
"gpmc_a5", NULL, NULL, "gpio_53",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A6, 52,
"gpmc_a6", NULL, NULL, "gpio_52",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A7, 6,
"gpmc_a7", NULL, NULL, "gpio_6",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A8, 5,
"gpmc_a8", NULL, NULL, "gpio_5",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_A9, 4,
"gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_CLK, 21,
"gpmc_clk", NULL, NULL, "gpio_21",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D10, 18,
"gpmc_d10", NULL, NULL, "gpio_18",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D11, 57,
"gpmc_d11", NULL, NULL, "gpio_57",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D12, 77,
"gpmc_d12", NULL, NULL, "gpio_77",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D13, 76,
"gpmc_d13", NULL, NULL, "gpio_76",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D14, 55,
"gpmc_d14", NULL, NULL, "gpio_55",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D15, 54,
"gpmc_d15", NULL, NULL, "gpio_54",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D8, 20,
"gpmc_d8", NULL, NULL, "gpio_20",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_D9, 19,
"gpmc_d9", NULL, NULL, "gpio_19",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS1, 22,
"gpmc_ncs1", NULL, NULL, "gpio_22",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS2, 23,
"gpmc_ncs2", NULL, NULL, "gpio_23",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS3, 24,
"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS4, 25,
"gpmc_ncs4", NULL, NULL, "gpio_25",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS5, 26,
"gpmc_ncs5", NULL, NULL, "gpio_26",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS6, 27,
"gpmc_ncs6", NULL, NULL, "gpio_27",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_NCS7, 28,
"gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
"gpmc_wait1", NULL, NULL, "gpio_33",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
"gpmc_wait2", NULL, NULL, "gpio_34",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
"gpmc_wait3", NULL, NULL, "gpio_35",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(HDQ_SIO, 101,
"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
"uart3_rx_irrx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(I2C1_SCL, 50,
"i2c1_scl", NULL, NULL, "gpio_50",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(I2C1_SDA, 51,
"i2c1_sda", NULL, NULL, "gpio_51",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(I2C2_SCL, 99,
"i2c2_scl", NULL, NULL, "gpio_99",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(I2C2_SDA, 100,
"i2c2_sda", NULL, NULL, "gpio_100",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(JTAG_EMU0, 127,
"jtag_emu0", "secure_indicator", NULL, "gpio_127",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(JTAG_EMU1, 126,
"jtag_emu1", NULL, NULL, "gpio_126",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
"mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
"mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_DR, 95,
"mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_DX, 94,
"mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
"mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
"spi2_cs1", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
"mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP2_DR, 144,
"mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
"mcbsp3_clkx", NULL, NULL, "gpio_71",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP3_DR, 73,
"mcbsp3_dr", NULL, NULL, "gpio_73",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP3_DX, 74,
"mcbsp3_dx", NULL, "sti_clk", "gpio_74",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
"mcbsp3_fsx", NULL, NULL, "gpio_72",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
"mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
"sdmmc1_clko", "ms_clko", NULL, NULL,
NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
"sdmmc1_cmd", "ms_bs", NULL, NULL,
NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
"sdmmc1_dat0", "ms_dat0", NULL, NULL,
NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
"sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
"sdmmc1_dat2", "ms_dat2", NULL, NULL,
NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
"sdmmc1_dat3", "ms_dat3", NULL, NULL,
NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
"sdmmc2_clko", NULL, NULL, "gpio_13",
NULL, "spi3_clk", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
"sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
NULL, "spi3_simo", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
"sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
NULL, "spi3_somi", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
"sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
"sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
NULL, "spi3_cs1", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
"sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
NULL, "spi3_cs0", NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDRC_A12, 2,
"sdrc_a12", NULL, NULL, "gpio_2",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDRC_A13, 1,
"sdrc_a13", NULL, NULL, "gpio_1",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDRC_A14, 0,
"sdrc_a14", NULL, NULL, "gpio_0",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDRC_CKE1, 36,
"sdrc_cke1", NULL, NULL, "gpio_36",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SDRC_NCS1, 37,
"sdrc_ncs1", NULL, NULL, "gpio_37",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_CLK, 81,
"spi1_clk", NULL, NULL, "gpio_81",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_CS0, 84,
"spi1_cs0", NULL, NULL, "gpio_84",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_CS1, 85,
"spi1_cs1", NULL, NULL, "gpio_85",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_CS2, 86,
"spi1_cs2", NULL, NULL, "gpio_86",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_CS3, 87,
"spi1_cs3", "spi2_cs1", NULL, "gpio_87",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_SIMO, 82,
"spi1_simo", NULL, NULL, "gpio_82",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI1_SOMI, 83,
"spi1_somi", NULL, NULL, "gpio_83",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI2_CLK, 88,
"spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI2_CS0, 91,
"spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI2_SIMO, 89,
"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SPI2_SOMI, 90,
"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
"ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
"ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
"ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SSI1_WAKE, 66,
"ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
"sys_clkout", NULL, NULL, "gpio_111",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
"sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
"sys_nirq0", NULL, NULL, "gpio_56",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
"sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART1_CTS, 32,
"uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
"mcbsp5_clkx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART1_RTS, 8,
"uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
"mcbsp5_fsx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART1_RX, 10,
"uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
"mcbsp5_dr", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART1_TX, 9,
"uart1_tx", "sdi_den", "dss_data20", "gpio_9",
"mcbsp5_dx", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART2_CTS, 67,
"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART2_RTS, 68,
"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART2_RX, 70,
"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART2_TX, 69,
"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
"uart3_rx_irrx", NULL, NULL, "gpio_105",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_CLK, 120,
"usb0hs_clk", NULL, NULL, "gpio_120",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
"usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
"usb0_txen", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
"usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
"usb0_dat", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
"usb0hs_data2", "uart3_rts_sd", NULL, NULL,
"usb0_se0", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
"usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
"usb0_puen", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
"usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
"usb0_vp", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
"usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
"usb0_vm", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
"usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
"usb0_rcv", NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
"usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_DIR, 121,
"usb0hs_dir", NULL, NULL, "gpio_121",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_NXT, 123,
"usb0hs_nxt", NULL, NULL, "gpio_123",
NULL, NULL, NULL, "safe_mode"),
_OMAP2430_MUXENTRY(USB0HS_STP, 122,
"usb0hs_stp", NULL, NULL, "gpio_122",
NULL, NULL, NULL, "safe_mode"),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
/*
* Balls for POP package
* 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
*/
#ifdef CONFIG_DEBUG_FS
static struct omap_ball __initdata omap2430_pop_ball[] = {
_OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
_OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
_OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
_OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
_OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
_OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
_OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
_OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
_OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
_OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
_OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
_OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
_OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
_OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
_OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
_OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
_OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
_OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
_OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
_OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
_OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
_OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
_OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
_OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
_OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
_OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
_OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
_OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
_OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
_OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
_OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
_OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
_OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
_OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
_OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
_OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
_OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
_OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
_OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
_OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
_OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
_OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
_OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
_OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
_OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
_OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
_OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
_OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
_OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
_OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
_OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
_OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
_OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
_OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
_OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
_OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
_OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
_OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
_OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
_OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
_OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
_OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
_OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
_OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
_OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
_OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
_OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
_OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
_OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
_OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
_OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
_OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
_OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
_OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
_OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
_OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
_OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
_OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
_OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
_OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
_OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
_OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
_OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
_OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
_OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
_OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
_OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
_OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
_OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
_OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
_OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
_OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
_OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
_OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
_OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
_OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
_OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
_OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
_OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
_OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
_OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
_OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
_OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
_OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
_OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
_OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
_OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
_OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
_OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
_OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
_OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
_OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
_OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
_OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
_OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
_OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
_OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
_OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
_OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
_OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
_OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
_OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
_OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
_OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
_OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
_OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
_OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
_OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
_OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
_OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
_OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
_OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
_OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
_OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
_OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
_OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
_OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
_OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
_OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
_OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
_OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
_OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
_OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
_OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
_OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
_OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
_OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
_OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
_OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
_OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
_OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
_OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
_OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
_OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
_OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
_OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
_OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
_OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
_OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
_OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
_OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
_OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
_OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
_OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
_OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
_OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
_OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
_OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
_OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
_OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
_OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
_OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap2430_pop_ball NULL
#endif
int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
{
struct omap_ball *package_balls = NULL;
switch (flags & OMAP_PACKAGE_MASK) {
case OMAP_PACKAGE_ZAC:
package_balls = omap2430_pop_ball;
break;
default:
pr_warning("%s: No ball data available for omap2420 package\n",
__func__);
}
return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
OMAP2430_CONTROL_PADCONF_MUX_PBASE,
OMAP2430_CONTROL_PADCONF_MUX_SIZE,
omap2430_muxmodes, NULL, board_subset,
package_balls);
}

370
arch/arm/mach-omap2/mux2430.h
View File

@ -1,370 +0,0 @@
/*
* Copyright (C) 2009 Nokia
* Copyright (C) 2009 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define OMAP2430_CONTROL_PADCONF_MUX_PBASE 0x49002030LU
#define OMAP2430_MUX(mode0, mux_value) \
{ \
.reg_offset = (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET), \
.value = (mux_value), \
}
/*
* OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
*
* Extracted from the TRM. Add 0x49002030 to these values to get the
* absolute addresses. The name in the macro is the mode-0 name of
* the pin. NOTE: These registers are 8-bits wide.
*
* Note that these defines use SDMMC instead of MMC for compatibility
* with signal names used in 3630.
*/
#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x001
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x002
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x003
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x004
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x005
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x006
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x007
#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x008
#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x009
#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET 0x00a
#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x00b
#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x00c
#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x00d
#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x00e
#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x00f
#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x010
#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x011
#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x012
#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x013
#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x014
#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x015
#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x016
#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x017
#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x018
#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x019
#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x01a
#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x01b
#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x01c
#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x01d
#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x01e
#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x01f
#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x020
#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x021
#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x022
#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x023
#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET 0x024
#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET 0x025
#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET 0x026
#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x027
#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x028
#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET 0x029
#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET 0x02a
#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET 0x02b
#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET 0x02c
#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET 0x02d
#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET 0x02e
#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET 0x02f
#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET 0x030
#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET 0x031
#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET 0x032
#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET 0x033
#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET 0x034
#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET 0x035
#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET 0x036
#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET 0x037
#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038
#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET 0x039
#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET 0x03a
#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET 0x03b
#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET 0x03c
#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET 0x03d
#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET 0x03e
#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET 0x03f
#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET 0x040
#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET 0x041
#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET 0x042
#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET 0x043
#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET 0x044
#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET 0x045
#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET 0x046
#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET 0x047
#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET 0x048
#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET 0x049
#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET 0x04a
#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET 0x04b
#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET 0x04c
#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET 0x04d
#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET 0x04e
#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET 0x04f
#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET 0x050
#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET 0x051
#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET 0x052
#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET 0x053
#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET 0x054
#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET 0x055
#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET 0x056
#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET 0x057
#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET 0x058
#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET 0x059
#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET 0x05a
#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET 0x05b
#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET 0x05c
#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET 0x05d
#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET 0x05e
#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET 0x05f
#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET 0x060
#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET 0x061
#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET 0x062
#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET 0x063
#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET 0x064
#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET 0x065
#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET 0x066
#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET 0x067
#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET 0x068
#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET 0x069
#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET 0x06a
#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET 0x06b
#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET 0x06c
#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET 0x06d
#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET 0x06e
#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x06f
#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x070
#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x071
#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x072
#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x073
#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x074
#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x075
#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x076
#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x077
#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x078
#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x079
#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x07a
#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x07b
#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x07c
#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x07d
#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x07e
#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x07f
#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x080
#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET 0x081
#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET 0x082
#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET 0x083
#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET 0x084
#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x085
#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x086
#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x087
#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x088
#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x089
#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x08a
#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x08b
#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x08c
#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET 0x08d
#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET 0x08e
#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET 0x08f
#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET 0x090
#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET 0x091
#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET 0x092
#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET 0x093
#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET 0x094
#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x095
#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x096
#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET 0x097
#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x098
#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x099
#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET 0x09a
#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET 0x09b
#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x09c
#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x09d
#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x09e
#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x09f
#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x0a0
#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x0a1
#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x0a2
#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x0a3
#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET 0x0a4
#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a5
#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a6
#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a7
#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a8
#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a9
#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET 0x0aa
#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ab
#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET 0x0ac
#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET 0x0ad
#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET 0x0ae
#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET 0x0af
#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0b0
#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0b1
#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET 0x0b2
#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET 0x0b3
#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET 0x0b4
#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET 0x0b5
#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET 0x0b6
#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET 0x0b7
#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET 0x0b8
#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET 0x0b9
#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET 0x0ba
#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET 0x0bb
#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET 0x0bc
#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET 0x0bd
#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET 0x0be
#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET 0x0bf
#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET 0x0c0
#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET 0x0c1
#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET 0x0c2
#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET 0x0c3
#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x0c4
#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x0c5
#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x0c6
#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x0c7
#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x0c8
#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET 0x0c9
#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x0ca
#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x0cb
#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x0cc
#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x0cd
#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x0ce
#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0cf
#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0d0
#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET 0x0d1
#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET 0x0d2
#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x0d3
#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x0d4
#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x0d5
#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x0d6
#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0d7
#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0d8
#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0d9
#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0da
#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET 0x0db
#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0dc
#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0dd
#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0de
#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0df
#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0e0
#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0e1
#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET 0x0e2
#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET 0x0e3
#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET 0x0e4
#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET 0x0e5
#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0e6
#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0e7
#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0e8
#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET 0x0e9
#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0ea
#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0eb
#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0ec
#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0ed
#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0ee
#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0ef
#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0f0
#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0f1
#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0f2
#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0f3
#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0f4
#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0f5
#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0f6
#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0f7
#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0f8
#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0f9
#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET 0x0fa
#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET 0x0fb
#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET 0x0fc
#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET 0x0fd
#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET 0x0fe
#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET 0x0ff
#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET 0x100
#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET 0x101
#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET 0x102
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET 0x103
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET 0x104
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET 0x105
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET 0x106
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET 0x107
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET 0x108
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET 0x109
#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET 0x10a
#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET 0x10b
#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET 0x10c
#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET 0x10d
#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET 0x10e
#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET 0x10f
#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET 0x110
#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET 0x111
#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET 0x112
#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET 0x113
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET 0x114
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET 0x115
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET 0x116
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET 0x117
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET 0x118
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET 0x119
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET 0x11a
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET 0x11b
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET 0x11c
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET 0x11d
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET 0x11e
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET 0x11f
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET 0x120
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET 0x121
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET 0x122
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET 0x123
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET 0x124
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET 0x125
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET 0x126
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET 0x127
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET 0x128
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET 0x129
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET 0x12a
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET 0x12b
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET 0x12c
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET 0x12d
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET 0x12e
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET 0x12f
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET 0x130
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET 0x131
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET 0x132
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET 0x133
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET 0x134
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET 0x135
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET 0x136
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET 0x137
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET 0x138
#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET 0x139
#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET 0x13a
#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET 0x13b
#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET 0x13c
#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET 0x13d
#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET 0x13e
#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET 0x13f
#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET 0x140
#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET 0x141
#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET 0x142
#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET 0x143
#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET 0x144
#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET 0x145
#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET 0x146
#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET 0x147
#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET 0x148
#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET 0x149
#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET 0x14a
#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET 0x14b
#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET 0x14c
#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET 0x14d
#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET 0x14e
#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET 0x14f
#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET 0x150
#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET 0x151
#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET 0x152
#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET 0x153
#define OMAP2430_CONTROL_PADCONF_MUX_SIZE \
(OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)

2
arch/arm/mach-omap2/omap_device.c
View File

@ -36,6 +36,7 @@
#include <linux/of.h>
#include <linux/notifier.h>
#include "common.h"
#include "soc.h"
#include "omap_device.h"
#include "omap_hwmod.h"
@ -204,6 +205,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
omap_auxdata_legacy_init(dev);
/* fall through */
default:
od = to_omap_device(pdev);

137
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View File

@ -108,8 +108,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = {
/* I2C1 */
static struct omap_hwmod omap2420_i2c1_hwmod = {
.name = "i2c1",
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
@ -133,8 +131,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = {
/* I2C2 */
static struct omap_hwmod omap2420_i2c2_hwmod = {
.name = "i2c2",
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
@ -179,16 +175,9 @@ static struct omap_mbox_pdata omap2420_mailbox_attrs = {
.info = omap2420_mailbox_info,
};
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
.mpu_irqs = omap2420_mailbox_irqs,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
@ -217,17 +206,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
};
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap2420_mcbsp_hwmod_class,
.mpu_irqs = omap2420_mcbsp1_irqs,
.sdma_reqs = omap2_mcbsp1_sdma_reqs,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
@ -243,17 +224,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
};
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap2420_mcbsp_hwmod_class,
.mpu_irqs = omap2420_mcbsp2_irqs,
.sdma_reqs = omap2_mcbsp2_sdma_reqs,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
@ -283,22 +256,9 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
};
/* msdi1 */
static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
{ .irq = 83 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
{ .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */
{ .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */
{ .dma_req = -1 }
};
static struct omap_hwmod omap2420_msdi1_hwmod = {
.name = "msdi1",
.class = &omap2420_msdi_hwmod_class,
.mpu_irqs = omap2420_msdi1_irqs,
.sdma_reqs = omap2420_msdi1_sdma_reqs,
.main_clk = "mmc_fck",
.prcm = {
.omap2 = {
@ -315,7 +275,6 @@ static struct omap_hwmod omap2420_msdi1_hwmod = {
/* HDQ1W/1-wire */
static struct omap_hwmod omap2420_hdq1w_hwmod = {
.name = "hdq1w",
.mpu_irqs = omap2_hdq1w_mpu_irqs,
.main_clk = "hdq_fck",
.prcm = {
.omap2 = {
@ -338,7 +297,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap2_i2c1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -347,7 +305,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap2_i2c2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -367,111 +324,51 @@ static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
{
.pa_start = 0x48028000,
.pa_end = 0x48028000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_timer1_hwmod,
.clk = "gpt1_ick",
.addr = omap2420_timer1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
{
.pa_start = 0x48022000,
.pa_end = 0x4802207f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_wd_timer2_hwmod,
.clk = "mpu_wdt_ick",
.addr = omap2420_wd_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
{
.pa_start = 0x48018000,
.pa_end = 0x480181ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio1_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio2 */
static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
{
.pa_start = 0x4801a000,
.pa_end = 0x4801a1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio2_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio3 */
static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
{
.pa_start = 0x4801c000,
.pa_end = 0x4801c1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio3_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio4 */
static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
{
.pa_start = 0x4801e000,
.pa_end = 0x4801e1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio4_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -496,7 +393,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mailbox_hwmod,
.addr = omap2_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -505,7 +401,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
.addr = omap2_mcbsp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -514,25 +409,14 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.addr = omap2xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = {
{
.pa_start = 0x4809c000,
.pa_end = 0x4809c000 + SZ_128 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
/* l4_core -> msdi1 */
static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_msdi1_hwmod,
.clk = "mmc_ick",
.addr = omap2420_msdi1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -541,36 +425,16 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_hdq1w_hwmod,
.clk = "hdq_ick",
.addr = omap2_hdq1w_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
/* l4_wkup -> 32ksync_counter */
static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
{
.pa_start = 0x48004000,
.pa_end = 0x4800401f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = {
{
.pa_start = 0x6800a000,
.pa_end = 0x6800afff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_counter_32k_hwmod,
.clk = "sync_32k_ick",
.addr = omap2420_counter_32k_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -578,7 +442,6 @@ static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2xxx_gpmc_hwmod,
.clk = "core_l3_ck",
.addr = omap2420_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

266
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View File

@ -86,8 +86,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = {
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2chs1_fck",
.prcm = {
.omap2 = {
@ -114,8 +112,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
static struct omap_hwmod omap2430_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2chs2_fck",
.prcm = {
.omap2 = {
@ -131,15 +127,9 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
};
/* gpio5 */
static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
{ .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */
{ .irq = -1 },
};
static struct omap_hwmod omap2430_gpio5_hwmod = {
.name = "gpio5",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap243x_gpio5_irqs,
.main_clk = "gpio5_fck",
.prcm = {
.omap2 = {
@ -182,15 +172,9 @@ static struct omap_mbox_pdata omap2430_mailbox_attrs = {
.info = omap2430_mailbox_info,
};
static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2430_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
.mpu_irqs = omap2430_mailbox_irqs,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
@ -205,27 +189,12 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
};
/* mcspi3 */
static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
{ .irq = 91 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
{ .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */
{ .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */
{ .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */
{ .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */
{ .dma_req = -1 }
};
static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
.num_chipselect = 2,
};
static struct omap_hwmod omap2430_mcspi3_hwmod = {
.name = "mcspi3",
.mpu_irqs = omap2430_mcspi3_mpu_irqs,
.sdma_reqs = omap2430_mcspi3_sdma_reqs,
.main_clk = "mcspi3_fck",
.prcm = {
.omap2 = {
@ -259,16 +228,8 @@ static struct omap_hwmod_class usbotg_class = {
};
/* usb_otg_hs */
static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
{ .name = "mc", .irq = 92 + OMAP_INTC_START, },
{ .name = "dma", .irq = 93 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2430_usbhsotg_hwmod = {
.name = "usb_otg_hs",
.mpu_irqs = omap2430_usbhsotg_mpu_irqs,
.main_clk = "usbhs_ick",
.prcm = {
.omap2 = {
@ -313,19 +274,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
};
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
{ .name = "ovr", .irq = 61 + OMAP_INTC_START, },
{ .name = "common", .irq = 64 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap2430_mcbsp_hwmod_class,
.mpu_irqs = omap2430_mcbsp1_irqs,
.sdma_reqs = omap2_mcbsp1_sdma_reqs,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
@ -341,18 +292,9 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
};
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
{ .name = "common", .irq = 16 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap2430_mcbsp_hwmod_class,
.mpu_irqs = omap2430_mcbsp2_irqs,
.sdma_reqs = omap2_mcbsp2_sdma_reqs,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
@ -368,18 +310,9 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
};
/* mcbsp3 */
static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
{ .name = "tx", .irq = 89 + OMAP_INTC_START, },
{ .name = "rx", .irq = 90 + OMAP_INTC_START, },
{ .name = "common", .irq = 17 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp3_hwmod = {
.name = "mcbsp3",
.class = &omap2430_mcbsp_hwmod_class,
.mpu_irqs = omap2430_mcbsp3_irqs,
.sdma_reqs = omap2_mcbsp3_sdma_reqs,
.main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
@ -395,24 +328,9 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
};
/* mcbsp4 */
static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
{ .name = "tx", .irq = 54 + OMAP_INTC_START, },
{ .name = "rx", .irq = 55 + OMAP_INTC_START, },
{ .name = "common", .irq = 18 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
{ .name = "rx", .dma_req = 20 },
{ .name = "tx", .dma_req = 19 },
{ .dma_req = -1 }
};
static struct omap_hwmod omap2430_mcbsp4_hwmod = {
.name = "mcbsp4",
.class = &omap2430_mcbsp_hwmod_class,
.mpu_irqs = omap2430_mcbsp4_irqs,
.sdma_reqs = omap2430_mcbsp4_sdma_chs,
.main_clk = "mcbsp4_fck",
.prcm = {
.omap2 = {
@ -428,24 +346,9 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
};
/* mcbsp5 */
static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
{ .name = "tx", .irq = 81 + OMAP_INTC_START, },
{ .name = "rx", .irq = 82 + OMAP_INTC_START, },
{ .name = "common", .irq = 19 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
{ .name = "rx", .dma_req = 22 },
{ .name = "tx", .dma_req = 21 },
{ .dma_req = -1 }
};
static struct omap_hwmod omap2430_mcbsp5_hwmod = {
.name = "mcbsp5",
.class = &omap2430_mcbsp_hwmod_class,
.mpu_irqs = omap2430_mcbsp5_irqs,
.sdma_reqs = omap2430_mcbsp5_sdma_chs,
.main_clk = "mcbsp5_fck",
.prcm = {
.omap2 = {
@ -478,17 +381,6 @@ static struct omap_hwmod_class omap2430_mmc_class = {
};
/* MMC/SD/SDIO1 */
static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
{ .irq = 83 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
{ .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */
{ .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */
{ .dma_req = -1 }
};
static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
{ .role = "dbck", .clk = "mmchsdb1_fck" },
};
@ -500,8 +392,6 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = {
static struct omap_hwmod omap2430_mmc1_hwmod = {
.name = "mmc1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2430_mmc1_mpu_irqs,
.sdma_reqs = omap2430_mmc1_sdma_reqs,
.opt_clks = omap2430_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
@ -519,17 +409,6 @@ static struct omap_hwmod omap2430_mmc1_hwmod = {
};
/* MMC/SD/SDIO2 */
static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
{ .irq = 86 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
{ .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */
{ .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */
{ .dma_req = -1 }
};
static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
{ .role = "dbck", .clk = "mmchsdb2_fck" },
};
@ -537,8 +416,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
static struct omap_hwmod omap2430_mmc2_hwmod = {
.name = "mmc2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2430_mmc2_mpu_irqs,
.sdma_reqs = omap2430_mmc2_sdma_reqs,
.opt_clks = omap2430_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
@ -557,7 +434,6 @@ static struct omap_hwmod omap2430_mmc2_hwmod = {
/* HDQ1W/1-wire */
static struct omap_hwmod omap2430_hdq1w_hwmod = {
.name = "hdq1w",
.mpu_irqs = omap2_hdq1w_mpu_irqs,
.main_clk = "hdq_fck",
.prcm = {
.omap2 = {
@ -589,7 +465,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap2_i2c1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -598,25 +473,14 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap2_i2c2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
{
.pa_start = OMAP243X_HS_BASE,
.pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_core ->usbhsotg interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_usbhsotg_hwmod,
.clk = "usb_l4_ick",
.addr = omap2430_usbhsotg_addrs,
.user = OCP_USER_MPU,
};
@ -625,7 +489,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mmc1_hwmod,
.clk = "mmchs1_ick",
.addr = omap2430_mmc1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -634,7 +497,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mmc2_hwmod,
.clk = "mmchs2_ick",
.addr = omap2430_mmc2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -643,7 +505,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcspi3_hwmod,
.clk = "mcspi3_ick",
.addr = omap2430_mcspi3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -655,129 +516,59 @@ static struct omap_hwmod_ocp_if omap2430_l3__iva = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
{
.pa_start = 0x49018000,
.pa_end = 0x49018000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_timer1_hwmod,
.clk = "gpt1_ick",
.addr = omap2430_timer1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = {
{
.pa_start = 0x49016000,
.pa_end = 0x4901607f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_wd_timer2_hwmod,
.clk = "mpu_wdt_ick",
.addr = omap2430_wd_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
{
.pa_start = 0x4900C000,
.pa_end = 0x4900C1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio1_hwmod,
.clk = "gpios_ick",
.addr = omap2430_gpio1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio2 */
static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
{
.pa_start = 0x4900E000,
.pa_end = 0x4900E1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio2_hwmod,
.clk = "gpios_ick",
.addr = omap2430_gpio2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio3 */
static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
{
.pa_start = 0x49010000,
.pa_end = 0x490101ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio3_hwmod,
.clk = "gpios_ick",
.addr = omap2430_gpio3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio4 */
static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
{
.pa_start = 0x49012000,
.pa_end = 0x490121ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio4_hwmod,
.clk = "gpios_ick",
.addr = omap2430_gpio4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> gpio5 */
static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
{
.pa_start = 0x480B6000,
.pa_end = 0x480B61ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_gpio5_hwmod,
.clk = "gpio5_ick",
.addr = omap2430_gpio5_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -802,7 +593,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mailbox_hwmod,
.addr = omap2_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -811,7 +601,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
.addr = omap2_mcbsp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -820,64 +609,30 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.addr = omap2xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
{
.name = "mpu",
.pa_start = 0x4808C000,
.pa_end = 0x4808C0ff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_core -> mcbsp3 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp3_hwmod,
.clk = "mcbsp3_ick",
.addr = omap2430_mcbsp3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
{
.name = "mpu",
.pa_start = 0x4808E000,
.pa_end = 0x4808E0ff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_core -> mcbsp4 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp4_hwmod,
.clk = "mcbsp4_ick",
.addr = omap2430_mcbsp4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
{
.name = "mpu",
.pa_start = 0x48096000,
.pa_end = 0x480960ff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_core -> mcbsp5 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp5_hwmod,
.clk = "mcbsp5_ick",
.addr = omap2430_mcbsp5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -886,35 +641,15 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_hdq1w_hwmod,
.clk = "hdq_ick",
.addr = omap2_hdq1w_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
/* l4_wkup -> 32ksync_counter */
static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = {
{
.pa_start = 0x49020000,
.pa_end = 0x4902001f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2430_gpmc_addrs[] = {
{
.pa_start = 0x6e000000,
.pa_end = 0x6e000fff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_counter_32k_hwmod,
.clk = "sync_32k_ick",
.addr = omap2430_counter_32k_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -922,7 +657,6 @@ static struct omap_hwmod_ocp_if omap2430_l3__gpmc = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2xxx_gpmc_hwmod,
.clk = "core_l3_ck",
.addr = omap2430_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

165
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
View File

@ -20,142 +20,6 @@
#include "omap_hwmod_common_data.h"
static struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
{
.pa_start = OMAP2_UART1_BASE,
.pa_end = OMAP2_UART1_BASE + SZ_8K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
{
.pa_start = OMAP2_UART2_BASE,
.pa_end = OMAP2_UART2_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
{
.pa_start = OMAP2_UART3_BASE,
.pa_end = OMAP2_UART3_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
{
.pa_start = 0x4802a000,
.pa_end = 0x4802a000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
{
.pa_start = 0x48078000,
.pa_end = 0x48078000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
{
.pa_start = 0x4807a000,
.pa_end = 0x4807a000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
{
.pa_start = 0x4807c000,
.pa_end = 0x4807c000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
{
.pa_start = 0x4807e000,
.pa_end = 0x4807e000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
{
.pa_start = 0x48080000,
.pa_end = 0x48080000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
{
.pa_start = 0x48082000,
.pa_end = 0x48082000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
{
.pa_start = 0x48084000,
.pa_end = 0x48084000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
{
.name = "mpu",
.pa_start = 0x48076000,
.pa_end = 0x480760ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2_rng_addr_space[] = {
{
.pa_start = 0x480a0000,
.pa_end = 0x480a004f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_sham_addrs[] = {
{
.pa_start = 0x480a4000,
.pa_end = 0x480a4000 + 0x64 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2xxx_aes_addrs[] = {
{
.pa_start = 0x480a6000,
.pa_end = 0x480a6000 + 0x50 - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/*
* Common interconnect data
*/
@ -182,7 +46,7 @@ struct omap_hwmod_ocp_if omap2xxx_dss__l3 = {
.omap2 = {
.l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
.flags = OMAP_FIREWALL_L3,
}
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -199,7 +63,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_uart1_hwmod,
.clk = "uart1_ick",
.addr = omap2xxx_uart1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -208,7 +71,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_uart2_hwmod,
.clk = "uart2_ick",
.addr = omap2xxx_uart2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -217,7 +79,6 @@ struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_uart3_hwmod,
.clk = "uart3_ick",
.addr = omap2xxx_uart3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -226,7 +87,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_mcspi1_hwmod,
.clk = "mcspi1_ick",
.addr = omap2_mcspi1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -235,7 +95,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_mcspi2_hwmod,
.clk = "mcspi2_ick",
.addr = omap2_mcspi2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -244,7 +103,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer2_hwmod,
.clk = "gpt2_ick",
.addr = omap2xxx_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -253,7 +111,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer3_hwmod,
.clk = "gpt3_ick",
.addr = omap2xxx_timer3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -262,7 +119,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer4_hwmod,
.clk = "gpt4_ick",
.addr = omap2xxx_timer4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -271,7 +127,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer5_hwmod,
.clk = "gpt5_ick",
.addr = omap2xxx_timer5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -280,7 +135,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer6_hwmod,
.clk = "gpt6_ick",
.addr = omap2xxx_timer6_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -289,7 +143,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer7_hwmod,
.clk = "gpt7_ick",
.addr = omap2xxx_timer7_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -298,7 +151,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer8_hwmod,
.clk = "gpt8_ick",
.addr = omap2xxx_timer8_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -307,7 +159,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer9_hwmod,
.clk = "gpt9_ick",
.addr = omap2xxx_timer9_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -316,7 +167,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer10_hwmod,
.clk = "gpt10_ick",
.addr = omap2_timer10_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -325,7 +175,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer11_hwmod,
.clk = "gpt11_ick",
.addr = omap2_timer11_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -334,7 +183,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_timer12_hwmod,
.clk = "gpt12_ick",
.addr = omap2xxx_timer12_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -348,7 +196,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
.flags = OMAP_FIREWALL_L4,
}
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -363,7 +211,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
.flags = OMAP_FIREWALL_L4,
}
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -378,7 +226,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
.flags = OMAP_FIREWALL_L4,
}
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -393,7 +241,7 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
.omap2 = {
.l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
.flags = OMAP_FIREWALL_L4,
}
},
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
@ -404,7 +252,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__rng = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_rng_hwmod,
.clk = "rng_ick",
.addr = omap2_rng_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -413,7 +260,6 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_sham_hwmod,
.clk = "sha_ick",
.addr = omap2xxx_sham_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -422,6 +268,5 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__aes = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2xxx_aes_hwmod,
.clk = "aes_ick",
.addr = omap2xxx_aes_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

72
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
View File

@ -20,14 +20,9 @@
#include "prm-regbits-24xx.h"
#include "wd_timer.h"
struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
{ .irq = 48 + OMAP_INTC_START, },
{ .irq = -1 },
};
struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
{ .dma_req = -1, },
};
/*
@ -219,14 +214,8 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
};
/* MPU */
static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = {
{ .name = "pmu", .irq = 3 + OMAP_INTC_START },
{ .irq = -1 }
};
struct omap_hwmod omap2xxx_mpu_hwmod = {
.name = "mpu",
.mpu_irqs = omap2xxx_mpu_irqs,
.class = &mpu_hwmod_class,
.main_clk = "mpu_ck",
};
@ -256,7 +245,6 @@ static struct omap_timer_capability_dev_attr capability_dsp_dev_attr = {
struct omap_hwmod omap2xxx_timer1_hwmod = {
.name = "timer1",
.mpu_irqs = omap2_timer1_mpu_irqs,
.main_clk = "gpt1_fck",
.prcm = {
.omap2 = {
@ -276,7 +264,6 @@ struct omap_hwmod omap2xxx_timer1_hwmod = {
struct omap_hwmod omap2xxx_timer2_hwmod = {
.name = "timer2",
.mpu_irqs = omap2_timer2_mpu_irqs,
.main_clk = "gpt2_fck",
.prcm = {
.omap2 = {
@ -295,7 +282,6 @@ struct omap_hwmod omap2xxx_timer2_hwmod = {
struct omap_hwmod omap2xxx_timer3_hwmod = {
.name = "timer3",
.mpu_irqs = omap2_timer3_mpu_irqs,
.main_clk = "gpt3_fck",
.prcm = {
.omap2 = {
@ -314,7 +300,6 @@ struct omap_hwmod omap2xxx_timer3_hwmod = {
struct omap_hwmod omap2xxx_timer4_hwmod = {
.name = "timer4",
.mpu_irqs = omap2_timer4_mpu_irqs,
.main_clk = "gpt4_fck",
.prcm = {
.omap2 = {
@ -333,7 +318,6 @@ struct omap_hwmod omap2xxx_timer4_hwmod = {
struct omap_hwmod omap2xxx_timer5_hwmod = {
.name = "timer5",
.mpu_irqs = omap2_timer5_mpu_irqs,
.main_clk = "gpt5_fck",
.prcm = {
.omap2 = {
@ -353,7 +337,6 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
struct omap_hwmod omap2xxx_timer6_hwmod = {
.name = "timer6",
.mpu_irqs = omap2_timer6_mpu_irqs,
.main_clk = "gpt6_fck",
.prcm = {
.omap2 = {
@ -373,7 +356,6 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
struct omap_hwmod omap2xxx_timer7_hwmod = {
.name = "timer7",
.mpu_irqs = omap2_timer7_mpu_irqs,
.main_clk = "gpt7_fck",
.prcm = {
.omap2 = {
@ -393,7 +375,6 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
struct omap_hwmod omap2xxx_timer8_hwmod = {
.name = "timer8",
.mpu_irqs = omap2_timer8_mpu_irqs,
.main_clk = "gpt8_fck",
.prcm = {
.omap2 = {
@ -413,7 +394,6 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
struct omap_hwmod omap2xxx_timer9_hwmod = {
.name = "timer9",
.mpu_irqs = omap2_timer9_mpu_irqs,
.main_clk = "gpt9_fck",
.prcm = {
.omap2 = {
@ -433,7 +413,6 @@ struct omap_hwmod omap2xxx_timer9_hwmod = {
struct omap_hwmod omap2xxx_timer10_hwmod = {
.name = "timer10",
.mpu_irqs = omap2_timer10_mpu_irqs,
.main_clk = "gpt10_fck",
.prcm = {
.omap2 = {
@ -453,7 +432,6 @@ struct omap_hwmod omap2xxx_timer10_hwmod = {
struct omap_hwmod omap2xxx_timer11_hwmod = {
.name = "timer11",
.mpu_irqs = omap2_timer11_mpu_irqs,
.main_clk = "gpt11_fck",
.prcm = {
.omap2 = {
@ -473,7 +451,6 @@ struct omap_hwmod omap2xxx_timer11_hwmod = {
struct omap_hwmod omap2xxx_timer12_hwmod = {
.name = "timer12",
.mpu_irqs = omap2xxx_timer12_mpu_irqs,
.main_clk = "gpt12_fck",
.prcm = {
.omap2 = {
@ -509,8 +486,6 @@ struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
struct omap_hwmod omap2xxx_uart1_hwmod = {
.name = "uart1",
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
.flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
@ -529,8 +504,6 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
struct omap_hwmod omap2xxx_uart2_hwmod = {
.name = "uart2",
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
.flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
@ -549,8 +522,6 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
struct omap_hwmod omap2xxx_uart3_hwmod = {
.name = "uart3",
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
.flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
@ -610,7 +581,7 @@ struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
},
},
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
.dev_attr = &omap2_3_dss_dispc_dev_attr,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
@ -657,7 +628,6 @@ struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = {
struct omap_hwmod omap2xxx_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2_gpio1_irqs,
.main_clk = "gpios_fck",
.prcm = {
.omap2 = {
@ -676,7 +646,6 @@ struct omap_hwmod omap2xxx_gpio1_hwmod = {
struct omap_hwmod omap2xxx_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2_gpio2_irqs,
.main_clk = "gpios_fck",
.prcm = {
.omap2 = {
@ -695,7 +664,6 @@ struct omap_hwmod omap2xxx_gpio2_hwmod = {
struct omap_hwmod omap2xxx_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2_gpio3_irqs,
.main_clk = "gpios_fck",
.prcm = {
.omap2 = {
@ -714,7 +682,6 @@ struct omap_hwmod omap2xxx_gpio3_hwmod = {
struct omap_hwmod omap2xxx_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap2_gpio4_irqs,
.main_clk = "gpios_fck",
.prcm = {
.omap2 = {
@ -736,8 +703,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
struct omap_hwmod omap2xxx_mcspi1_hwmod = {
.name = "mcspi1",
.mpu_irqs = omap2_mcspi1_mpu_irqs,
.sdma_reqs = omap2_mcspi1_sdma_reqs,
.main_clk = "mcspi1_fck",
.prcm = {
.omap2 = {
@ -759,8 +724,6 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
struct omap_hwmod omap2xxx_mcspi2_hwmod = {
.name = "mcspi2",
.mpu_irqs = omap2_mcspi2_mpu_irqs,
.sdma_reqs = omap2_mcspi2_sdma_reqs,
.main_clk = "mcspi2_fck",
.prcm = {
.omap2 = {
@ -795,15 +758,9 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = {
};
/* gpmc */
static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = {
{ .irq = 20 + OMAP_INTC_START, },
{ .irq = -1 }
};
struct omap_hwmod omap2xxx_gpmc_hwmod = {
.name = "gpmc",
.class = &omap2xxx_gpmc_hwmod_class,
.mpu_irqs = omap2xxx_gpmc_irqs,
.main_clk = "gpmc_fck",
/*
* XXX HWMOD_INIT_NO_RESET should not be needed for this IP
@ -840,14 +797,8 @@ static struct omap_hwmod_class omap2_rng_hwmod_class = {
.sysc = &omap2_rng_sysc,
};
static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = {
{ .irq = 52 + OMAP_INTC_START, },
{ .irq = -1 }
};
struct omap_hwmod omap2xxx_rng_hwmod = {
.name = "rng",
.mpu_irqs = omap2_rng_mpu_irqs,
.main_clk = "l4_ck",
.prcm = {
.omap2 = {
@ -884,20 +835,8 @@ static struct omap_hwmod_class omap2xxx_sham_class = {
.sysc = &omap2_sham_sysc,
};
static struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = {
{ .irq = 51 + OMAP_INTC_START, },
{ .irq = -1 }
};
static struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = {
{ .name = "rx", .dma_req = 13 },
{ .dma_req = -1 }
};
struct omap_hwmod omap2xxx_sham_hwmod = {
.name = "sham",
.mpu_irqs = omap2_sham_mpu_irqs,
.sdma_reqs = omap2_sham_sdma_chs,
.main_clk = "l4_ck",
.prcm = {
.omap2 = {
@ -927,15 +866,8 @@ static struct omap_hwmod_class omap2xxx_aes_class = {
.sysc = &omap2_aes_sysc,
};
static struct omap_hwmod_dma_info omap2_aes_sdma_chs[] = {
{ .name = "tx", .dma_req = 9 },
{ .name = "rx", .dma_req = 10 },
{ .dma_req = -1 }
};
struct omap_hwmod omap2xxx_aes_hwmod = {
.name = "aes",
.sdma_reqs = omap2_aes_sdma_chs,
.main_clk = "l4_ck",
.prcm = {
.omap2 = {

5
arch/arm/mach-omap2/omap_hwmod_common_data.h
View File

@ -18,9 +18,6 @@
#include "common.h"
#include "display.h"
/* Common address space across OMAP2xxx */
extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[];
/* Common address space across OMAP2xxx/3xxx */
extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[];
extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[];
@ -41,8 +38,6 @@ extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
/* Common IP block data across OMAP2xxx */
extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[];
extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[];
extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
extern struct omap_hwmod omap2xxx_l3_main_hwmod;
extern struct omap_hwmod omap2xxx_l4_core_hwmod;

138
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
@ -16,6 +17,7 @@
#include <linux/platform_data/pinctrl-single.h>
#include "am35xx.h"
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
@ -26,6 +28,9 @@ struct pdata_init {
void (*fn)(void);
};
struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
/*
* Create alias for USB host PHY clock.
* Remove this when clock phandle can be provided via DT
@ -68,6 +73,15 @@ static inline void legacy_init_wl12xx(unsigned ref_clock,
}
#endif
#ifdef CONFIG_MACH_NOKIA_N8X0
static void __init omap2420_n8x0_legacy_init(void)
{
omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
}
#else
#define omap2420_n8x0_legacy_init NULL
#endif
#ifdef CONFIG_ARCH_OMAP3
static void __init hsmmc2_internal_input_clk(void)
{
@ -78,6 +92,33 @@ static void __init hsmmc2_internal_input_clk(void)
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
}
static int omap3_sbc_t3730_twl_callback(struct device *dev,
unsigned gpio,
unsigned ngpio)
{
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"wlan rst");
if (res)
return res;
gpio_export(gpio, 0);
return 0;
}
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
}
static void __init omap3_sbc_t3730_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_igep0020_legacy_init(void)
{
omap3_igep2_display_init_of();
@ -92,6 +133,42 @@ static void __init omap3_zoom_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
}
static void am35xx_enable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static void am35xx_disable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static struct emac_platform_data am35xx_emac_pdata = {
.interrupt_enable = am35xx_enable_emac_int,
.interrupt_disable = am35xx_disable_emac_int,
};
static void __init am3517_evm_legacy_init(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
v &= ~AM35XX_CPGMACSS_SW_RST;
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
@ -125,10 +202,48 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void))
pcs_pdata.rearm = rearm;
}
/*
* GPIOs for TWL are initialized by the I2C bus and need custom
* handing until DSS has device tree bindings.
*/
void omap_auxdata_legacy_init(struct device *dev)
{
if (dev->platform_data)
return;
if (strcmp("twl4030-gpio", dev_name(dev)))
return;
dev->platform_data = &twl_gpio_auxdata;
}
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
@ -137,14 +252,20 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
{ /* sentinel */ },
};
/*
* Few boards still need to initialize some legacy devices with
* platform data until the drivers support device tree.
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP4
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
@ -156,14 +277,8 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ /* sentinel */ },
};
void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
static void pdata_quirks_check(struct pdata_init *quirks)
{
struct pdata_init *quirks = pdata_quirks;
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
@ -173,3 +288,12 @@ void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
quirks++;
}
}
void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
{
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
pdata_quirks_check(pdata_quirks);
}

63
arch/arm/mach-shmobile/Kconfig
View File

@ -2,7 +2,7 @@ config ARCH_SHMOBILE
bool
config ARCH_SHMOBILE_MULTI
bool "SH-Mobile Series" if ARCH_MULTI_V7
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
select CPU_V7
@ -20,24 +20,47 @@ config ARCH_SHMOBILE_MULTI
if ARCH_SHMOBILE_MULTI
comment "SH-Mobile System Type"
comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
comment "SH-Mobile Board Type"
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select RENESAS_IRQC
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
comment "Renesas ARM SoCs Board Type"
config MACH_GENMAI
bool "Genmai board"
depends on ARCH_R7S72100
config MACH_KOELSCH
bool "Koelsch board"
depends on ARCH_R8A7791
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
comment "SH-Mobile System Configuration"
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
comment "Renesas ARM SoCs System Configuration"
endif
if ARCH_SHMOBILE_LEGACY
comment "SH-Mobile System Type"
comment "Renesas ARM SoCs System Type"
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
@ -126,7 +149,7 @@ config ARCH_R7S72100
select CPU_V7
select SH_CLK_CPG
comment "SH-Mobile Board Type"
comment "Renesas ARM SoCs Board Type"
config MACH_APE6EVM
bool "APE6EVM board"
@ -203,6 +226,17 @@ config MACH_GENMAI
depends on ARCH_R7S72100
select USE_OF
config MACH_GENMAI_REFERENCE
bool "Genmai board - Reference Device Tree Implementation"
depends on ARCH_R7S72100
select USE_OF
---help---
Use reference implementation of Genmai board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
@ -228,17 +262,6 @@ config MACH_LAGER
depends on ARCH_R8A7790
select USE_OF
config MACH_LAGER_REFERENCE
bool "Lager board - Reference Device Tree Implementation"
depends on ARCH_R8A7790
select USE_OF
---help---
Use reference implementation of Lager board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
config MACH_KOELSCH
bool "Koelsch board"
depends on ARCH_R8A7791
@ -269,7 +292,7 @@ config MACH_KZM9G_REFERENCE
This is intended to aid developers
comment "SH-Mobile System Configuration"
comment "Renesas ARM SoCs System Configuration"
config CPU_HAS_INTEVT
bool
@ -294,8 +317,8 @@ config SHMOBILE_TIMER_HZ
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
case of low timer frequencies other values may be more suitable.
SH-Mobile systems using a 32768 Hz RCLK for clock events may want
to select a HZ value such as 128 that can evenly divide RCLK.
Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
config SH_TIMER_CMT

5
arch/arm/mach-shmobile/Makefile
View File

@ -56,7 +56,10 @@ obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
@ -64,10 +67,10 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_GENMAI) += board-genmai.o
obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o

4
arch/arm/mach-shmobile/Makefile.boot
View File

@ -6,12 +6,12 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000

7
arch/arm/mach-shmobile/board-armadillo800eva.c
View File

@ -423,7 +423,7 @@ static struct platform_pwm_backlight_data pwm_backlight_data = {
.max_brightness = 255,
.dft_brightness = 255,
.pwm_period_ns = 33333, /* 30kHz */
.enable_gpio = -1,
.enable_gpio = 61,
};
static struct platform_device pwm_backlight_device = {
@ -963,7 +963,7 @@ static struct resource fsi_resources[] = {
[0] = {
.name = "FSI",
.start = 0xfe1f0000,
.end = 0xfe1f8400 - 1,
.end = 0xfe1f0400 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -1210,9 +1210,6 @@ static void __init eva_init(void)
r8a7740_pinmux_init();
r8a7740_meram_workaround();
/* LCDC0 */
gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* GETHER */
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */

19
arch/arm/mach-shmobile/board-bockw-reference.c
View File

@ -30,9 +30,13 @@
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
#define PFC 0xfffc0000
#define PUPR4 0x110
static void __init bockw_init(void)
{
static void __iomem *fpga;
void __iomem *fpga;
void __iomem *pfc;
r8a7778_clock_init();
r8a7778_init_irq_extpin_dt(1);
@ -50,6 +54,19 @@ static void __init bockw_init(void)
u16 val = ioread16(fpga + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
iounmap(fpga);
}
pfc = ioremap_nocache(PFC, 0x200);
if (pfc) {
/*
* FIXME
*
* SDHI CD/WP pin needs pull-up
*/
iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
iounmap(pfc);
}
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);

17
arch/arm/mach-shmobile/board-bockw.c
View File

@ -117,6 +117,11 @@ static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
};
static struct smsc911x_platform_config smsc911x_data __initdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
@ -272,7 +277,6 @@ static struct resource mmc_resources[] __initdata = {
static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
@ -329,11 +333,11 @@ static struct rsnd_ssi_platform_info rsnd_ssi[] = {
RSND_SSI_UNUSED, /* SSI 1 */
RSND_SSI_UNUSED, /* SSI 2 */
RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
};
static struct rsnd_scu_platform_info rsnd_scu[9] = {
@ -615,6 +619,10 @@ static void __init bockw_init(void)
&usb_phy_platform_data,
sizeof(struct rcar_phy_platform_data));
regulator_register_fixed(0, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* for SMSC */
fpga = ioremap_nocache(FPGA, SZ_1M);
@ -630,9 +638,6 @@ static void __init bockw_init(void)
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
regulator_register_fixed(0, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
platform_device_register_resndata(
&platform_bus, "smsc911x", -1,
smsc911x_resources, ARRAY_SIZE(smsc911x_resources),

49
arch/arm/mach-shmobile/board-genmai-reference.c Normal file
View File

@ -0,0 +1,49 @@
/*
* Genmai board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <mach/common.h>
#include <mach/r7s72100.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static void __init genmai_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
of_clk_init(NULL);
#else
r7s72100_clock_init();
#endif
r7s72100_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const genmai_boards_compat_dt[] __initconst = {
"renesas,genmai-reference",
NULL,
};
DT_MACHINE_START(GENMAI_DT, "genmai")
.init_early = r7s72100_init_early,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END

79
arch/arm/mach-shmobile/board-koelsch-reference.c Normal file
View File

@ -0,0 +1,79 @@
/*
* Koelsch board support - Reference DT implementation
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <mach/common.h>
#include <mach/rcar-gen2.h>
#include <mach/r8a7791.h>
#include <asm/mach/arch.h>
static void __init koelsch_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
/*
* This is a really crude hack to provide clkdev support to the SCIF
* and CMT devices until they get moved to DT.
*/
static const char * const scif_names[] = {
"scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
"scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
"scifa4", "scifa5",
};
struct clk *clk;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
clk = clk_get(NULL, scif_names[i]);
if (clk) {
clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
clk_put(clk);
}
}
clk = clk_get(NULL, "cmt0");
if (clk) {
clk_register_clkdev(clk, NULL, "sh_cmt.0");
clk_put(clk);
}
#else
r8a7791_clock_init();
#endif
r8a7791_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
"renesas,koelsch",
"renesas,koelsch-reference",
NULL,
};
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = koelsch_boards_compat_dt,
MACHINE_END

190
arch/arm/mach-shmobile/board-koelsch.c
View File

@ -19,18 +19,205 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/phy.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_device.h>
#include <linux/sh_eth.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7791.h>
#include <mach/rcar-gen2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
{
.type = RCAR_DU_ENCODER_NONE,
.output = RCAR_DU_OUTPUT_LVDS0,
.connector.lvds.panel = {
.width_mm = 210,
.height_mm = 158,
.mode = {
.clock = 65000,
.hdisplay = 1024,
.hsync_start = 1048,
.hsync_end = 1184,
.htotal = 1344,
.vdisplay = 768,
.vsync_start = 771,
.vsync_end = 777,
.vtotal = 806,
.flags = 0,
},
},
},
};
static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
.encoders = koelsch_du_encoders,
.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
};
static const struct resource du_resources[] __initconst = {
DEFINE_RES_MEM(0xfeb00000, 0x40000),
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
DEFINE_RES_IRQ(gic_spi(256)),
DEFINE_RES_IRQ(gic_spi(268)),
};
static void __init koelsch_add_du_device(void)
{
struct platform_device_info info = {
.name = "rcar-du-r8a7791",
.id = -1,
.res = du_resources,
.num_res = ARRAY_SIZE(du_resources),
.data = &koelsch_du_pdata,
.size_data = sizeof(koelsch_du_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&info);
}
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
/* LEDS */
static struct gpio_led koelsch_leds[] = {
{
.name = "led8",
.gpio = RCAR_GP_PIN(2, 21),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led7",
.gpio = RCAR_GP_PIN(2, 20),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led6",
.gpio = RCAR_GP_PIN(2, 19),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = {
.leds = koelsch_leds,
.num_leds = ARRAY_SIZE(koelsch_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(5, 3), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(5, 2), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(5, 1), "SW2-pin2"),
GPIO_KEY(KEY_1, RCAR_GP_PIN(5, 0), "SW2-pin1"),
GPIO_KEY(KEY_G, RCAR_GP_PIN(7, 6), "SW36"),
GPIO_KEY(KEY_F, RCAR_GP_PIN(7, 5), "SW35"),
GPIO_KEY(KEY_E, RCAR_GP_PIN(7, 4), "SW34"),
GPIO_KEY(KEY_D, RCAR_GP_PIN(7, 3), "SW33"),
GPIO_KEY(KEY_C, RCAR_GP_PIN(7, 2), "SW32"),
GPIO_KEY(KEY_B, RCAR_GP_PIN(7, 1), "SW31"),
GPIO_KEY(KEY_A, RCAR_GP_PIN(7, 0), "SW30"),
};
static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
static const struct pinctrl_map koelsch_pinctrl_map[] = {
/* DU */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_rgb666", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_sync", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
"du_clk_out_0", "du"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
"intc_irq0", "intc"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
"scif0_data_d", "scif0"),
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
"scif1_data_d", "scif1"),
};
static void __init koelsch_add_standard_devices(void)
{
r8a7791_clock_init();
pinctrl_register_mappings(koelsch_pinctrl_map,
ARRAY_SIZE(koelsch_pinctrl_map));
r8a7791_pinmux_init();
r8a7791_add_standard_devices();
platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
&ether_pdata, sizeof(ether_pdata));
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&koelsch_leds_pdata,
sizeof(koelsch_leds_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&koelsch_keys_pdata,
sizeof(koelsch_keys_pdata));
koelsch_add_du_device();
}
/*
* Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int koelsch_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init koelsch_init(void)
{
koelsch_add_standard_devices();
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7791-ether-ff:01",
koelsch_ksz8041_fixup);
}
static const char * const koelsch_boards_compat_dt[] __initconst = {
@ -41,7 +228,8 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
.init_early = r8a7791_init_early,
.init_machine = koelsch_add_standard_devices,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_init,
.init_late = shmobile_init_late,
.dt_compat = koelsch_boards_compat_dt,
MACHINE_END

34
arch/arm/mach-shmobile/board-lager-reference.c
View File

@ -18,20 +18,53 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <mach/common.h>
#include <mach/rcar-gen2.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
static void __init lager_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
/*
* This is a really crude hack to provide clkdev support to the SCIF
* and CMT devices until they get moved to DT.
*/
static const char * const scif_names[] = {
"scifa0", "scifa1", "scifb0", "scifb1",
"scifb2", "scifa2", "scif0", "scif1",
"hscif0", "hscif1",
};
struct clk *clk;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
clk = clk_get(NULL, scif_names[i]);
if (clk) {
clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
clk_put(clk);
}
}
clk = clk_get(NULL, "cmt0");
if (clk) {
clk_register_clkdev(clk, NULL, "sh_cmt.0");
clk_put(clk);
}
#else
r8a7790_clock_init();
#endif
r8a7790_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
"renesas,lager-reference",
NULL,
};
@ -41,5 +74,6 @@ DT_MACHINE_START(LAGER_DT, "lager")
.init_early = r8a7790_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

151
arch/arm/mach-shmobile/board-lager.c
View File

@ -31,7 +31,9 @@
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <mach/common.h>
@ -39,6 +41,11 @@
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
@ -120,7 +127,8 @@ static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
@ -140,6 +148,71 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};
/*
* SDHI regulator macro
*
** FIXME**
* Lager board vqmmc is provided via DA9063 PMIC chip,
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
* but, it doesn't have regulator support at this point.
* It uses gpio-regulator for vqmmc as quick-hack.
*/
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
.supply_name = "SDHI" #idx "Vcc", \
.microvolts = 3300000, \
.gpio = vdd_pin, \
.enable_high = 1, \
.init_data = &vcc_sdhi##idx##_init_data, \
}; \
\
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
.constraints = { \
.input_uV = 3300000, \
.min_uV = 1800000, \
.max_uV = 3300000, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static struct gpio vccq_sdhi##idx##_gpio = \
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
\
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
{ .value = 1800000, .gpios = 0 }, \
{ .value = 3300000, .gpios = 1 }, \
}; \
\
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
.supply_name = "vqmmc", \
.gpios = &vccq_sdhi##idx##_gpio, \
.nr_gpios = 1, \
.states = vccq_sdhi##idx##_states, \
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
.type = REGULATOR_VOLTAGE, \
.init_data = &vccq_sdhi##idx##_init_data, \
};
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
@ -165,6 +238,59 @@ static const struct resource ether_resources[] __initconst = {
DEFINE_RES_IRQ(gic_spi(162)),
};
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
static struct mtd_partition spi_flash_part[] = {
/* Reserved for user loader program, read-only */
{
.name = "loader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE,
},
/* Reserved for user program, read-only */
{
.name = "user",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = MTD_WRITEABLE,
},
/* All else is writable (e.g. JFFS2) */
{
.name = "flash",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.parts = spi_flash_part,
.nr_parts = ARRAY_SIZE(spi_flash_part),
.type = "s25fl512s",
};
static const struct rspi_plat_data qspi_pdata __initconst = {
.num_chipselect = 1,
};
static const struct spi_board_info spi_info[] __initconst = {
{
.modalias = "m25p80",
.platform_data = &spi_flash_data,
.mode = SPI_MODE_0,
.max_speed_hz = 30000000,
.bus_num = 0,
.chip_select = 0,
},
};
/* QSPI resource */
static const struct resource qspi_resources[] __initconst = {
DEFINE_RES_MEM(0xe6b10000, 0x1000),
DEFINE_RES_IRQ(gic_spi(184)),
};
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@ -197,6 +323,9 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
static void __init lager_add_standard_devices(void)
{
int fixed_regulator_idx = 0;
int gpio_regulator_idx = 0;
r8a7790_clock_init();
pinctrl_register_mappings(lager_pinctrl_map,
@ -210,7 +339,8 @@ static void __init lager_add_standard_devices(void)
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
regulator_register_always_on(fixed_regulator_idx++,
"fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
@ -222,6 +352,22 @@ static void __init lager_add_standard_devices(void)
&ether_pdata, sizeof(ether_pdata));
lager_add_du_device();
platform_device_register_resndata(&platform_bus, "qspi", 0,
qspi_resources,
ARRAY_SIZE(qspi_resources),
&qspi_pdata, sizeof(qspi_pdata));
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
}
/*
@ -260,5 +406,6 @@ DT_MACHINE_START(LAGER_DT, "lager")
.init_early = r8a7790_init_early,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

21
arch/arm/mach-shmobile/board-mackerel.c
View File

@ -41,6 +41,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/pm_clock.h>
#include <linux/regulator/fixed.h>
@ -548,9 +549,9 @@ static void __init hdmi_init_pm_clock(void)
clk_get_rate(&sh7372_pllc2_clk));
rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
if (rate < 0) {
if (rate <= 0) {
pr_err("Cannot get suitable rate: %ld\n", rate);
ret = rate;
ret = -EINVAL;
goto out;
}
@ -1311,6 +1312,10 @@ static struct i2c_board_info i2c1_devices[] = {
},
};
static unsigned long pin_pulldown_conf[] = {
PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0),
};
static const struct pinctrl_map mackerel_pinctrl_map[] = {
/* ADXL34X */
PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
@ -1396,17 +1401,19 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
/* USBHS0 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
"usb0_vbus", "usb0"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
"usb0_vbus", pin_pulldown_conf),
/* USBHS1 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_vbus", "usb1"),
PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_vbus", pin_pulldown_conf),
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
"usb1_otg_id_0", "usb1"),
};
#define GPIO_PORT9CR IOMEM(0xE6051009)
#define GPIO_PORT10CR IOMEM(0xE605100A)
#define GPIO_PORT167CR IOMEM(0xE60520A7)
#define GPIO_PORT168CR IOMEM(0xE60520A8)
#define SRCR4 IOMEM(0xe61580bc)
#define USCCR1 IOMEM(0xE6058144)
static void __init mackerel_init(void)
@ -1446,12 +1453,6 @@ static void __init mackerel_init(void)
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* USBHS0 */
gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
/* USBHS1 */
gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
/* FSI2 port A (ak4643) */
gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */

19
arch/arm/mach-shmobile/sh-gpio.h
View File

@ -26,23 +26,4 @@ static inline void __init gpio_direction_none(void __iomem * addr)
__raw_writeb(0x00, addr);
}
static inline void __init gpio_request_pullup(void __iomem * addr)
{
u8 data = __raw_readb(addr);
data &= 0x0F;
data |= 0xC0;
__raw_writeb(data, addr);
}
static inline void __init gpio_request_pulldown(void __iomem * addr)
{
u8 data = __raw_readb(addr);
data &= 0x0F;
data |= 0xA0;
__raw_writeb(data, addr);
}
#endif /* __ASM_ARCH_GPIO_H */

20
include/dt-bindings/pinctrl/omap.h
View File

@ -49,5 +49,25 @@
#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
/*
* Macros to allow using the absolute physical address instead of the
* padconf registers instead of the offset from padconf base.
*/
#define OMAP_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset))
#define OMAP2420_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0030) (val)
#define OMAP2430_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val)
#define OMAP3_CORE1_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val)
#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define OMAP4_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0040) (val)
#define OMAP4_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xe040) (val)
#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define OMAP5_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2840) (val)
#define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val)
#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
#endif

1
include/sound/rcar_snd.h
View File

@ -34,7 +34,6 @@
* B : SSI direction
*/
#define RSND_SSI_CLK_PIN_SHARE (1 << 31)
#define RSND_SSI_CLK_FROM_ADG (1 << 30) /* clock parent is master */
#define RSND_SSI_SYNC (1 << 29) /* SSI34_sync etc */
#define RSND_SSI_PLAY (1 << 24)