renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 11:13:58 +08:00
Code

mtd: nand: samsung: Retrieve ECC requirements from extended ID

Browse Source 
On some nand controllers with hw-ecc the controller code wants to know
the ecc strength and size and having these as 0, 0 is not accepted.

Specifying these in devicetree is possible but undesirable as the nand
may be different in different production runs of the same board, so it
is better to get this info from the nand id where possible.

This commit adds code to read the ecc strength and size from the nand
for Samsung extended-id nands. This code is based on the info for the 5th
id byte in the datasheets for the following Samsung nands: K9GAG08U0E,
K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits
in the exact same way.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This commit is contained in:
Hans de Goede 2016-06-08 10:45:28 +02:00 committed by Boris Brezillon
parent 3b5206f4be
commit 8fc82d456e
1 changed files with 20 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
drivers/mtd/nand/nand_samsung.c
View File

@ -66,6 +66,26 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
extid >>= 2;
mtd->erasesize = (128 * 1024) <<
(((extid >> 1) & 0x04) | (extid & 0x03));
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
chip->ecc_step_ds = 512;
chip->ecc_strength_ds = 1 << extid;
} else {
chip->ecc_step_ds = 1024;
switch (extid) {
case 5:
chip->ecc_strength_ds = 24;
break;
case 6:
chip->ecc_strength_ds = 40;
break;
case 7:
chip->ecc_strength_ds = 60;
break;
}
}
} else {
nand_decode_ext_id(chip);
}