mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 17:23:55 +08:00
spi: spi-ti-qspi: Support per-transfer and per-slave speed_hz settings
The spi-ti-qspi driver initializes its spi clock by the spi-max-frequency property from the controller node, and ignores per-transfer (and per-slave) speed_hz settings. Isolate clock settings out from ti_qspi_setup() and call it from ti_qspi_start_transfer_one() and ti_qspi_exec_mem_op(), using per-transfer speed_hz and per-slave max_speed_hz settings. Also drop spi_max_frequency from struct ti_qspi and use spi_master's max_speed_hz. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Link: https://lore.kernel.org/r/20220519.084604.966119051165023533.atsushi.nemoto@sord.co.jp Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
6598b91b5a
commit
8d0b512844
@ -57,7 +57,6 @@ struct ti_qspi {
|
|||||||
void *rx_bb_addr;
|
void *rx_bb_addr;
|
||||||
struct dma_chan *rx_chan;
|
struct dma_chan *rx_chan;
|
||||||
|
|
||||||
u32 spi_max_frequency;
|
|
||||||
u32 cmd;
|
u32 cmd;
|
||||||
u32 dc;
|
u32 dc;
|
||||||
|
|
||||||
@ -140,37 +139,19 @@ static inline void ti_qspi_write(struct ti_qspi *qspi,
|
|||||||
static int ti_qspi_setup(struct spi_device *spi)
|
static int ti_qspi_setup(struct spi_device *spi)
|
||||||
{
|
{
|
||||||
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
||||||
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
int ret;
|
||||||
int clk_div = 0, ret;
|
|
||||||
u32 clk_ctrl_reg, clk_rate, clk_mask;
|
|
||||||
|
|
||||||
if (spi->master->busy) {
|
if (spi->master->busy) {
|
||||||
dev_dbg(qspi->dev, "master busy doing other transfers\n");
|
dev_dbg(qspi->dev, "master busy doing other transfers\n");
|
||||||
return -EBUSY;
|
return -EBUSY;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (!qspi->spi_max_frequency) {
|
if (!qspi->master->max_speed_hz) {
|
||||||
dev_err(qspi->dev, "spi max frequency not defined\n");
|
dev_err(qspi->dev, "spi max frequency not defined\n");
|
||||||
return -EINVAL;
|
return -EINVAL;
|
||||||
}
|
}
|
||||||
|
|
||||||
clk_rate = clk_get_rate(qspi->fclk);
|
spi->max_speed_hz = min(spi->max_speed_hz, qspi->master->max_speed_hz);
|
||||||
|
|
||||||
clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1;
|
|
||||||
|
|
||||||
if (clk_div < 0) {
|
|
||||||
dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n");
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (clk_div > QSPI_CLK_DIV_MAX) {
|
|
||||||
dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n",
|
|
||||||
QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
dev_dbg(qspi->dev, "hz: %d, clock divider %d\n",
|
|
||||||
qspi->spi_max_frequency, clk_div);
|
|
||||||
|
|
||||||
ret = pm_runtime_resume_and_get(qspi->dev);
|
ret = pm_runtime_resume_and_get(qspi->dev);
|
||||||
if (ret < 0) {
|
if (ret < 0) {
|
||||||
@ -178,18 +159,6 @@ static int ti_qspi_setup(struct spi_device *spi)
|
|||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
||||||
|
|
||||||
clk_ctrl_reg &= ~QSPI_CLK_EN;
|
|
||||||
|
|
||||||
/* disable SCLK */
|
|
||||||
ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
||||||
|
|
||||||
/* enable SCLK */
|
|
||||||
clk_mask = QSPI_CLK_EN | clk_div;
|
|
||||||
ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
||||||
ctx_reg->clkctrl = clk_mask;
|
|
||||||
|
|
||||||
pm_runtime_mark_last_busy(qspi->dev);
|
pm_runtime_mark_last_busy(qspi->dev);
|
||||||
ret = pm_runtime_put_autosuspend(qspi->dev);
|
ret = pm_runtime_put_autosuspend(qspi->dev);
|
||||||
if (ret < 0) {
|
if (ret < 0) {
|
||||||
@ -200,6 +169,37 @@ static int ti_qspi_setup(struct spi_device *spi)
|
|||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void ti_qspi_setup_clk(struct ti_qspi *qspi, u32 speed_hz)
|
||||||
|
{
|
||||||
|
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
||||||
|
int clk_div;
|
||||||
|
u32 clk_ctrl_reg, clk_rate, clk_ctrl_new;
|
||||||
|
|
||||||
|
clk_rate = clk_get_rate(qspi->fclk);
|
||||||
|
clk_div = DIV_ROUND_UP(clk_rate, speed_hz) - 1;
|
||||||
|
clk_div = clamp(clk_div, 0, QSPI_CLK_DIV_MAX);
|
||||||
|
dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", speed_hz, clk_div);
|
||||||
|
|
||||||
|
pm_runtime_resume_and_get(qspi->dev);
|
||||||
|
|
||||||
|
clk_ctrl_new = QSPI_CLK_EN | clk_div;
|
||||||
|
if (ctx_reg->clkctrl != clk_ctrl_new) {
|
||||||
|
clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
|
||||||
|
|
||||||
|
clk_ctrl_reg &= ~QSPI_CLK_EN;
|
||||||
|
|
||||||
|
/* disable SCLK */
|
||||||
|
ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
|
||||||
|
|
||||||
|
/* enable SCLK */
|
||||||
|
ti_qspi_write(qspi, clk_ctrl_new, QSPI_SPI_CLOCK_CNTRL_REG);
|
||||||
|
ctx_reg->clkctrl = clk_ctrl_new;
|
||||||
|
}
|
||||||
|
|
||||||
|
pm_runtime_mark_last_busy(qspi->dev);
|
||||||
|
pm_runtime_put_autosuspend(qspi->dev);
|
||||||
|
}
|
||||||
|
|
||||||
static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
|
static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
|
||||||
{
|
{
|
||||||
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
||||||
@ -623,8 +623,10 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
|
|||||||
|
|
||||||
mutex_lock(&qspi->list_lock);
|
mutex_lock(&qspi->list_lock);
|
||||||
|
|
||||||
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
|
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select) {
|
||||||
|
ti_qspi_setup_clk(qspi, mem->spi->max_speed_hz);
|
||||||
ti_qspi_enable_memory_map(mem->spi);
|
ti_qspi_enable_memory_map(mem->spi);
|
||||||
|
}
|
||||||
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
|
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
|
||||||
op->addr.nbytes, op->dummy.nbytes);
|
op->addr.nbytes, op->dummy.nbytes);
|
||||||
|
|
||||||
@ -701,6 +703,7 @@ static int ti_qspi_start_transfer_one(struct spi_master *master,
|
|||||||
wlen = t->bits_per_word >> 3;
|
wlen = t->bits_per_word >> 3;
|
||||||
transfer_len_words = min(t->len / wlen, frame_len_words);
|
transfer_len_words = min(t->len / wlen, frame_len_words);
|
||||||
|
|
||||||
|
ti_qspi_setup_clk(qspi, t->speed_hz);
|
||||||
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
|
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
|
||||||
if (ret) {
|
if (ret) {
|
||||||
dev_dbg(qspi->dev, "transfer message failed\n");
|
dev_dbg(qspi->dev, "transfer message failed\n");
|
||||||
@ -851,7 +854,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
|
|||||||
pm_runtime_enable(&pdev->dev);
|
pm_runtime_enable(&pdev->dev);
|
||||||
|
|
||||||
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
|
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
|
||||||
qspi->spi_max_frequency = max_freq;
|
master->max_speed_hz = max_freq;
|
||||||
|
|
||||||
dma_cap_zero(mask);
|
dma_cap_zero(mask);
|
||||||
dma_cap_set(DMA_MEMCPY, mask);
|
dma_cap_set(DMA_MEMCPY, mask);
|
||||||
|
Loading…
Reference in New Issue
Block a user