renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 01:04:08 +08:00
Code

spi: spi-ti-qspi: Support per-transfer and per-slave speed_hz settings

Browse Source 
The spi-ti-qspi driver initializes its spi clock by the
spi-max-frequency property from the controller node, and ignores
per-transfer (and per-slave) speed_hz settings.

Isolate clock settings out from ti_qspi_setup() and call it from
ti_qspi_start_transfer_one() and ti_qspi_exec_mem_op(), using
per-transfer speed_hz and per-slave max_speed_hz settings.

Also drop spi_max_frequency from struct ti_qspi and use spi_master's
max_speed_hz.

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Link: https://lore.kernel.org/r/20220519.084604.966119051165023533.atsushi.nemoto@sord.co.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Atsushi Nemoto 2022-05-19 08:46:04 +09:00 committed by Mark Brown
parent 6598b91b5a
commit 8d0b512844
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 39 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
drivers/spi/spi-ti-qspi.c
View File

@ -57,7 +57,6 @@ struct ti_qspi {
void *rx_bb_addr;
struct dma_chan *rx_chan;
u32 spi_max_frequency;
u32 cmd;
u32 dc;
@ -140,37 +139,19 @@ static inline void ti_qspi_write(struct ti_qspi *qspi,
static int ti_qspi_setup(struct spi_device *spi)
{
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
int clk_div = 0, ret;
u32 clk_ctrl_reg, clk_rate, clk_mask;
int ret;
if (spi->master->busy) {
dev_dbg(qspi->dev, "master busy doing other transfers\n");
return -EBUSY;
}
if (!qspi->spi_max_frequency) {
if (!qspi->master->max_speed_hz) {
dev_err(qspi->dev, "spi max frequency not defined\n");
return -EINVAL;
}
clk_rate = clk_get_rate(qspi->fclk);
clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1;
if (clk_div < 0) {
dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n");
return -EINVAL;
}
if (clk_div > QSPI_CLK_DIV_MAX) {
dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n",
QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
return -EINVAL;
}
dev_dbg(qspi->dev, "hz: %d, clock divider %d\n",
qspi->spi_max_frequency, clk_div);
spi->max_speed_hz = min(spi->max_speed_hz, qspi->master->max_speed_hz);
ret = pm_runtime_resume_and_get(qspi->dev);
if (ret < 0) {
@ -178,18 +159,6 @@ static int ti_qspi_setup(struct spi_device *spi)
return ret;
}
clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
clk_ctrl_reg &= ~QSPI_CLK_EN;
/* disable SCLK */
ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
/* enable SCLK */
clk_mask = QSPI_CLK_EN | clk_div;
ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
ctx_reg->clkctrl = clk_mask;
pm_runtime_mark_last_busy(qspi->dev);
ret = pm_runtime_put_autosuspend(qspi->dev);
if (ret < 0) {
@ -200,6 +169,37 @@ static int ti_qspi_setup(struct spi_device *spi)
return 0;
}
static void ti_qspi_setup_clk(struct ti_qspi *qspi, u32 speed_hz)
{
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
int clk_div;
u32 clk_ctrl_reg, clk_rate, clk_ctrl_new;
clk_rate = clk_get_rate(qspi->fclk);
clk_div = DIV_ROUND_UP(clk_rate, speed_hz) - 1;
clk_div = clamp(clk_div, 0, QSPI_CLK_DIV_MAX);
dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", speed_hz, clk_div);
pm_runtime_resume_and_get(qspi->dev);
clk_ctrl_new = QSPI_CLK_EN | clk_div;
if (ctx_reg->clkctrl != clk_ctrl_new) {
clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
clk_ctrl_reg &= ~QSPI_CLK_EN;
/* disable SCLK */
ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
/* enable SCLK */
ti_qspi_write(qspi, clk_ctrl_new, QSPI_SPI_CLOCK_CNTRL_REG);
ctx_reg->clkctrl = clk_ctrl_new;
}
pm_runtime_mark_last_busy(qspi->dev);
pm_runtime_put_autosuspend(qspi->dev);
}
static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
{
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
@ -623,8 +623,10 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
mutex_lock(&qspi->list_lock);
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select) {
ti_qspi_setup_clk(qspi, mem->spi->max_speed_hz);
ti_qspi_enable_memory_map(mem->spi);
}
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
op->addr.nbytes, op->dummy.nbytes);
@ -701,6 +703,7 @@ static int ti_qspi_start_transfer_one(struct spi_master *master,
wlen = t->bits_per_word >> 3;
transfer_len_words = min(t->len / wlen, frame_len_words);
ti_qspi_setup_clk(qspi, t->speed_hz);
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
if (ret) {
dev_dbg(qspi->dev, "transfer message failed\n");
@ -851,7 +854,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
qspi->spi_max_frequency = max_freq;
master->max_speed_hz = max_freq;
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);