mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 09:13:55 +08:00
phy: rockchip: set pulldown for strobe line in dts
This patch add support to set the internal pulldown via dt property and allow simplify the board design for the trace from emmc-phy to the eMMC chipset. Default to not set the pull-down. This patch was inspired from the 4.4 tree of the Rockchip SDK, where it is enabled unconditional. The patch had been tested with our rk3399 customized board. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201129054416.3980-2-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
parent
51e339deab
commit
8b5c2b45b8
@ -67,6 +67,10 @@
|
||||
#define PHYCTRL_OTAPDLYENA_SHIFT 0xb
|
||||
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
|
||||
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
|
||||
#define PHYCTRL_REN_STRB_DISABLE 0x0
|
||||
#define PHYCTRL_REN_STRB_ENABLE 0x1
|
||||
#define PHYCTRL_REN_STRB_MASK 0x1
|
||||
#define PHYCTRL_REN_STRB_SHIFT 0x9
|
||||
|
||||
#define PHYCTRL_IS_CALDONE(x) \
|
||||
((((x) >> PHYCTRL_CALDONE_SHIFT) & \
|
||||
@ -80,6 +84,7 @@ struct rockchip_emmc_phy {
|
||||
struct regmap *reg_base;
|
||||
struct clk *emmcclk;
|
||||
unsigned int drive_impedance;
|
||||
unsigned int enable_strobe_pulldown;
|
||||
};
|
||||
|
||||
static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
|
||||
@ -295,6 +300,13 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
|
||||
PHYCTRL_OTAPDLYSEL_MASK,
|
||||
PHYCTRL_OTAPDLYSEL_SHIFT));
|
||||
|
||||
/* Internal pull-down for strobe line */
|
||||
regmap_write(rk_phy->reg_base,
|
||||
rk_phy->reg_offset + GRF_EMMCPHY_CON2,
|
||||
HIWORD_UPDATE(rk_phy->enable_strobe_pulldown,
|
||||
PHYCTRL_REN_STRB_MASK,
|
||||
PHYCTRL_REN_STRB_SHIFT));
|
||||
|
||||
/* Power up emmc phy analog blocks */
|
||||
return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
|
||||
}
|
||||
@ -359,10 +371,14 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
|
||||
rk_phy->reg_offset = reg_offset;
|
||||
rk_phy->reg_base = grf;
|
||||
rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
|
||||
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
|
||||
|
||||
if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
|
||||
rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
|
||||
|
||||
if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
|
||||
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
|
||||
|
||||
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
|
||||
if (IS_ERR(generic_phy)) {
|
||||
dev_err(dev, "failed to create PHY\n");
|
||||
|
Loading…
Reference in New Issue
Block a user