mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
ARM: mvebu: Add Netgear ReadyNAS 2120 board
All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports, USB 2.0 front port, Gigabit controller and PHYs for the two rear ports, serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan controllers, G751 temperature sensor) except for: - the Intersil ISL12057 I2C RTC Chip, - the Armada NAND controller. Support for both of those is currently work in progress and does not prevent boot. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Arnaud Ebalard
Jason Cooper
parent
ece19e2b6b
commit
8aa0b019fe
@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
|
||||
armada-xp-axpwifiap.dtb \
|
||||
armada-xp-db.dtb \
|
||||
armada-xp-gp.dtb \
|
||||
armada-xp-netgear-rn2120.dtb \
|
||||
armada-xp-matrix.dtb \
|
||||
armada-xp-openblocks-ax3-4.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += \
|
||||
|
||||
286
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
Normal file
286
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
Normal file
@ -0,0 +1,286 @@
|
||||
/*
|
||||
* Device Tree file for NETGEAR ReadyNAS 2120
|
||||
*
|
||||
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "armada-xp-mv78230.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NETGEAR ReadyNAS 2120";
|
||||
compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x00000000 0 0x80000000>; /* 2GB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
/* Connected to first Marvell 88SE9170 SATA controller */
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Connected to second Marvell 88SE9170 SATA controller */
|
||||
pcie@2,0 {
|
||||
/* Port 0, Lane 1 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Connected to Fresco Logic FL1009 USB 3.0 controller */
|
||||
pcie@5,0 {
|
||||
/* Port 1, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
pinctrl {
|
||||
poweroff: poweroff {
|
||||
marvell,pins = "mpp42";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
power_button_pin: power-button-pin {
|
||||
marvell,pins = "mpp27";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
reset_button_pin: reset-button-pin {
|
||||
marvell,pins = "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata1_led_pin: sata1-led-pin {
|
||||
marvell,pins = "mpp31";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata2_led_pin: sata2-led-pin {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata3_led_pin: sata3-led-pin {
|
||||
marvell,pins = "mpp44";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata4_led_pin: sata4-led-pin {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata1_power_pin: sata1-power-pin {
|
||||
marvell,pins = "mpp24";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata2_power_pin: sata2-power-pin {
|
||||
marvell,pins = "mpp25";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata3_power_pin: sata3-power-pin {
|
||||
marvell,pins = "mpp26";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata4_power_pin: sata4-power-pin {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata1_pres_pin: sata1-pres-pin {
|
||||
marvell,pins = "mpp32";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata2_pres_pin: sata2-pres-pin {
|
||||
marvell,pins = "mpp33";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata3_pres_pin: sata3-pres-pin {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata4_pres_pin: sata4-pres-pin {
|
||||
marvell,pins = "mpp35";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
err_led_pin: err-led-pin {
|
||||
marvell,pins = "mpp45";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
clocks = <&coreclk 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
/* Front USB 2.0 port */
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
compatible = "marvell,mv64xxx-i2c";
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* Controller for rear fan #1 of 3 (Protechnic
|
||||
* MGT4012XB-O20, 8000RPM) near eSATA port */
|
||||
g762_fan1: g762@3e {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x3e>;
|
||||
clocks = <&g762_clk>; /* input clock */
|
||||
fan_gear_mode = <0>;
|
||||
fan_startv = <1>;
|
||||
pwm_polarity = <0>;
|
||||
};
|
||||
|
||||
/* Controller for rear (center) fan #2 of 3 */
|
||||
g762_fan2: g762@48 {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x48>;
|
||||
clocks = <&g762_clk>; /* input clock */
|
||||
fan_gear_mode = <0>;
|
||||
fan_startv = <1>;
|
||||
pwm_polarity = <0>;
|
||||
};
|
||||
|
||||
/* Controller for rear fan #3 of 3 */
|
||||
g762_fan3: g762@49 {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x49>;
|
||||
clocks = <&g762_clk>; /* input clock */
|
||||
fan_gear_mode = <0>;
|
||||
fan_startv = <1>;
|
||||
pwm_polarity = <0>;
|
||||
};
|
||||
|
||||
/* Temperature sensor */
|
||||
g751: g751@4c {
|
||||
compatible = "gmt,g751";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
clocks {
|
||||
g762_clk: g762-oscillator {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
|
||||
&sata3_led_pin &sata4_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
red-sata1-led {
|
||||
label = "rn2120:red:sata1";
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
red-sata2-led {
|
||||
label = "rn2120:red:sata2";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
red-sata3-led {
|
||||
label = "rn2120:red:sata3";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
red-sata4-led {
|
||||
label = "rn2120:red:sata4";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
red-err-led {
|
||||
label = "rn2120:red:err";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&power_button_pin &reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power-button {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reset-button {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
pinctrl-0 = <&poweroff>;
|
||||
pinctrl-names = "default";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user