2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-19 16:14:13 +08:00

ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains

There is a possibility of a loop happening in the PLL output clock
chain on the S3C64XX series. clk_mpll's parent was set to be
clk_mout_mpll, but this is fed from clk_fout_epll (which is also
clk_mpll).

clk_mpll is meant to be the output from the MPLL, and clk_mout_mpll
is a seperate clock derived from the mux of clk_mpll and clk_fin_mpll
and thus should be considered a seperate clock.

Anything using clk_mpll directly really should not be relying on this
being the clock that is eventually routed to a peripheral, so remove the
loop and ensure that the clocks accurately represent the clock chain
in the device.

The clk_mpll is not being used outside of the s3c6400-clock.c code, so
this change should not break anything else.

Do the same for the EPLL.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Ben Dooks 2010-01-07 11:05:55 +09:00
parent c5974b835a
commit 87d26d2d11

View File

@ -46,6 +46,7 @@ static struct clk clk_ext_xtal_mux = {
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
#define clk_fout_epll clk_epll
struct clk_sources {
unsigned int nr_sources;
@ -88,11 +89,6 @@ static struct clksrc_clk clk_mout_apll = {
.sources = &clk_src_apll,
};
static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
};
static struct clk *clk_src_epll_list[] = {
[0] = &clk_fin_epll,
[1] = &clk_fout_epll,
@ -715,7 +711,6 @@ static struct clk *clks[] __initdata = {
&clk_iis_cd1,
&clk_pcm_cd,
&clk_mout_epll.clk,
&clk_fout_epll,
&clk_mout_mpll.clk,
&clk_dout_mpll,
&clk_mmc0.clk,
@ -760,7 +755,4 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
clkp->name, ret);
}
}
clk_mpll.parent = &clk_mout_mpll.clk;
clk_epll.parent = &clk_mout_epll.clk;
}