renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 10:44:14 +08:00
Code

mmc: sdhci: Balance vmmc regulator_enable(), and always enable vqmmc

Browse Source 
The vmmc regulator enable in sdhci_add_host is NOT necessary since
it can be enabled during mmc_power_up by function mmc_regulator_set_ocr.
And this extra enable will make regulator_enable/regulator_disable
unbalanced. Consequently, vmmc can't be disabled during mmc_power_off.

Also, if the vqmmc regulator exists, it should be enabled regardless it
support 1.8v or not.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Kevin Liu 2012-11-17 17:55:51 -05:00 committed by Chris Ball
parent 91ab252ac5
commit 8363c37414
1 changed files with 8 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/mmc/host/sdhci.c
View File

@ -2858,12 +2858,14 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_hostname(mmc));
host->vqmmc = NULL;
}
}
else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
} else {
regulator_enable(host->vqmmc);
else
caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
if (!regulator_is_supported_voltage(host->vqmmc, 1800000,
1800000))
caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
}
/* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
@ -2919,8 +2921,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_hostname(mmc));
host->vmmc = NULL;
}
} else
regulator_enable(host->vmmc);
}
#ifdef CONFIG_REGULATOR
if (host->vmmc) {