mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-11-14 13:45:42 +08:00
clk: imx: composite-8m: Add imx8m_divider_determine_rate
Currently, certain clocks are derrived as a divider from their
parent clock. For some clocks, even when CLK_SET_RATE_PARENT
is set, the parent clock is not properly set which can lead
to some relatively inaccurate clock values.
Unlike imx/clk-composite-93 and imx/clk-divider-gate, it
cannot rely on calling a standard determine_rate function,
because the 8m composite clocks have a pre-divider and
post-divider. Because of this, a custom determine_rate
function is necessary to determine the maximum clock
division which is equivalent to pre-divider * the
post-divider.
With this added, the system can attempt to adjust the parent rate
when the proper flags are set which can lead to a more precise clock
value.
On the imx8mplus, no clock changes are present.
On the Mini and Nano, this can help achieve more accurate
lcdif clocks. When trying to get a pixel clock of 31.500MHz
on an imx8m Nano, the clocks divided the 594MHz down, but
left the parent rate untouched which caused a calulation error.
Before:
video_pll 594000000
video_pll_bypass 594000000
video_pll_out 594000000
disp_pixel 31263158
disp_pixel_clk 31263158
Variance = -236842 Hz
After this patch:
video_pll 31500000
video_pll_bypass 31500000
video_pll_out 31500000
disp_pixel 31500000
disp_pixel_clk 31500000
Variance = 0 Hz
All other clocks rates and parent were the same.
Similar results on imx8mm were found.
Fixes: 690dccc4a0
("Revert "clk: imx: composite-8m: Add support to determine_rate"")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230506195325.876871-1-aford173@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
This commit is contained in:
parent
632c60ecd2
commit
8208181fe5
@ -119,10 +119,41 @@ static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int imx8m_divider_determine_rate(struct clk_hw *hw,
|
||||
struct clk_rate_request *req)
|
||||
{
|
||||
struct clk_divider *divider = to_clk_divider(hw);
|
||||
int prediv_value;
|
||||
int div_value;
|
||||
|
||||
/* if read only, just return current value */
|
||||
if (divider->flags & CLK_DIVIDER_READ_ONLY) {
|
||||
u32 val;
|
||||
|
||||
val = readl(divider->reg);
|
||||
prediv_value = val >> divider->shift;
|
||||
prediv_value &= clk_div_mask(divider->width);
|
||||
prediv_value++;
|
||||
|
||||
div_value = val >> PCG_DIV_SHIFT;
|
||||
div_value &= clk_div_mask(PCG_DIV_WIDTH);
|
||||
div_value++;
|
||||
|
||||
return divider_ro_determine_rate(hw, req, divider->table,
|
||||
PCG_PREDIV_WIDTH + PCG_DIV_WIDTH,
|
||||
divider->flags, prediv_value * div_value);
|
||||
}
|
||||
|
||||
return divider_determine_rate(hw, req, divider->table,
|
||||
PCG_PREDIV_WIDTH + PCG_DIV_WIDTH,
|
||||
divider->flags);
|
||||
}
|
||||
|
||||
static const struct clk_ops imx8m_clk_composite_divider_ops = {
|
||||
.recalc_rate = imx8m_clk_composite_divider_recalc_rate,
|
||||
.round_rate = imx8m_clk_composite_divider_round_rate,
|
||||
.set_rate = imx8m_clk_composite_divider_set_rate,
|
||||
.determine_rate = imx8m_divider_determine_rate,
|
||||
};
|
||||
|
||||
static u8 imx8m_clk_composite_mux_get_parent(struct clk_hw *hw)
|
||||
|
Loading…
Reference in New Issue
Block a user