2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 22:24:09 +08:00

dt-bindings: thermal: convert rockchip-thermal to json-schema

Convert Rockchip Thermal sensor dt-bindings to YAML.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506175514.168365-3-ezequiel@collabora.com
This commit is contained in:
Ezequiel Garcia 2021-05-06 14:55:12 -03:00 committed by Daniel Lezcano
parent 5e5c9f9a75
commit 7d70aa141e
2 changed files with 95 additions and 85 deletions

View File

@ -1,85 +0,0 @@
* Temperature Sensor ADC (TSADC) on rockchip SoCs
Required properties:
- compatible : should be "rockchip,<name>-tsadc"
"rockchip,px30-tsadc": found on PX30 SoCs
"rockchip,rv1108-tsadc": found on RV1108 SoCs
"rockchip,rk3228-tsadc": found on RK3228 SoCs
"rockchip,rk3288-tsadc": found on RK3288 SoCs
"rockchip,rk3328-tsadc": found on RK3328 SoCs
"rockchip,rk3368-tsadc": found on RK3368 SoCs
"rockchip,rk3399-tsadc": found on RK3399 SoCs
- reg : physical base address of the controller and length of memory mapped
region.
- interrupts : The interrupt number to the cpu. The interrupt specifier format
depends on the interrupt controller.
- clocks : Must contain an entry for each entry in clock-names.
- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
the peripheral clock.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the name "tsadc-apb".
- pinctrl-names : The pin control state names;
- pinctrl-0 : The "init" pinctrl state, it will be set before device probe.
- pinctrl-1 : The "default" pinctrl state, it will be set after reset the
TSADC controller.
- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
Optional properties:
- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
1:HIGH.
- rockchip,grf : The phandle of the syscon node for the general register file.
Exiample:
tsadc: tsadc@ff280000 {
compatible = "rockchip,rk3288-tsadc";
reg = <0xff280000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "init", "default", "sleep";
pinctrl-0 = <&otp_gpio>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
};
Example: referring to thermal sensors:
thermal-zones {
cpu_thermal: cpu_thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&tsadc 1>;
trips {
cpu_alert0: cpu_alert {
temperature = <70000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};

View File

@ -0,0 +1,95 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/rockchip-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
maintainers:
- Heiko Stuebner <heiko@sntech.de>
properties:
compatible:
enum:
- rockchip,px30-tsadc # PX30 SoCs
- rockchip,rv1108-tsadc # RV1108 SoCs
- rockchip,rk3228-tsadc # RK3228 SoCs
- rockchip,rk3288-tsadc # RK3288 SoCs
- rockchip,rk3328-tsadc # RK3328 SoCs
- rockchip,rk3368-tsadc # RK3368 SoCs
- rockchip,rk3399-tsadc # RK3399 SoCs
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: tsadc
- const: apb_pclk
resets:
maxItems: 1
reset-names:
items:
- const: tsadc-apb
"#thermal-sensor-cells":
const: 1
rockchip,grf:
description: The phandle of the syscon node for the general register file.
$ref: /schemas/types.yaml#/definitions/phandle
rockchip,hw-tshut-temp:
description: The hardware-controlled shutdown temperature value.
$ref: /schemas/types.yaml#/definitions/uint32
rockchip,hw-tshut-mode:
description: The hardware-controlled shutdown mode 0:CRU 1:GPIO.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
rockchip,hw-tshut-polarity:
description: The hardware-controlled active polarity 0:LOW 1:HIGH.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- reset-names
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rk3288-cru.h>
tsadc: tsadc@ff280000 {
compatible = "rockchip,rk3288-tsadc";
reg = <0xff280000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
};