2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-30 08:04:13 +08:00

netxen: remove netxen_nic_phan_reg.h

Consolidate register definitions in netxen_nic_hdr.h

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Dhananjay Phadke 2009-08-23 08:35:13 +00:00 committed by David S. Miller
parent 22b5794b5d
commit 7d6fd5e7e9
9 changed files with 102 additions and 215 deletions

View File

@ -53,6 +53,7 @@
#include <asm/io.h>
#include <asm/byteorder.h>
#include "netxen_nic_hdr.h"
#include "netxen_nic_hw.h"
#define _NETXEN_NIC_LINUX_MAJOR 4
@ -227,8 +228,6 @@
#define MPORT_SINGLE_FUNCTION_MODE 0x1111
#define MPORT_MULTI_FUNCTION_MODE 0x2222
#include "netxen_nic_phan_reg.h"
/*
* NetXen host-peg signal message structure
*
@ -503,17 +502,11 @@ struct netxen_skb_frag {
u64 length;
};
#define _netxen_set_bits(config_word, start, bits, val) {\
unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start));\
unsigned long long __tvalue = (val); \
(config_word) &= ~__tmask; \
(config_word) |= (((__tvalue) << (start)) & __tmask); \
}
#define _netxen_clear_bits(config_word, start, bits) {\
unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start)); \
(config_word) &= ~__tmask; \
}
struct netxen_recv_crb {
u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
u32 sw_int_mask[NUM_STS_DESC_RINGS];
};
/* Following defines are for the state of the buffers */
#define NETXEN_BUFFER_FREE 0
@ -1194,6 +1187,18 @@ struct netxen_adapter {
const struct firmware *fw;
};
/* Set promiscuous mode for a GbE interface */
int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, u32 mode);
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
u32 mode);
/* Generic enable for GbE ports. Will detect the speed of the link. */
int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port);
/* Disable a GbE interface */
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter);
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);

View File

@ -30,7 +30,6 @@
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
#include "netxen_nic_phan_reg.h"
#define NXHAL_VERSION 1

View File

@ -37,7 +37,6 @@
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include "netxen_nic_phan_reg.h"
struct netxen_nic_stats {
char stat_string[ETH_GSTRING_LEN];

View File

@ -723,9 +723,92 @@ enum {
#define NETXEN_FW_VERSION_MINOR (NETXEN_CAM_RAM(0x154))
#define NETXEN_FW_VERSION_SUB (NETXEN_CAM_RAM(0x158))
#define NETXEN_ROM_LOCK_ID (NETXEN_CAM_RAM(0x100))
#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
#define NETXEN_CRB_WIN_LOCK_ID (NETXEN_CAM_RAM(0x124))
#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
#define NIC_CRB_BASE (NETXEN_CAM_RAM(0x200))
#define NIC_CRB_BASE_2 (NETXEN_CAM_RAM(0x700))
#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
#define NX_CDRP_CRB_OFFSET (NETXEN_NIC_REG(0x18))
#define NX_ARG1_CRB_OFFSET (NETXEN_NIC_REG(0x1c))
#define NX_ARG2_CRB_OFFSET (NETXEN_NIC_REG(0x20))
#define NX_ARG3_CRB_OFFSET (NETXEN_NIC_REG(0x24))
#define NX_SIGN_CRB_OFFSET (NETXEN_NIC_REG(0x28))
#define CRB_HOST_DUMMY_BUF_ADDR_HI (NETXEN_NIC_REG(0x3c))
#define CRB_HOST_DUMMY_BUF_ADDR_LO (NETXEN_NIC_REG(0x40))
#define CRB_CMDPEG_STATE (NETXEN_NIC_REG(0x50))
#define CRB_RCVPEG_STATE (NETXEN_NIC_REG(0x13c))
#define CRB_XG_STATE (NETXEN_NIC_REG(0x94))
#define CRB_XG_STATE_P3 (NETXEN_NIC_REG(0x98))
#define CRB_PF_LINK_SPEED_1 (NETXEN_NIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (NETXEN_NIC_REG(0xec))
#define CRB_MPORT_MODE (NETXEN_NIC_REG(0xc4))
#define CRB_DMA_SHIFT (NETXEN_NIC_REG(0xcc))
#define CRB_INT_VECTOR (NETXEN_NIC_REG(0xd4))
#define CRB_CMD_PRODUCER_OFFSET (NETXEN_NIC_REG(0x08))
#define CRB_CMD_CONSUMER_OFFSET (NETXEN_NIC_REG(0x0c))
#define CRB_CMD_PRODUCER_OFFSET_1 (NETXEN_NIC_REG(0x1ac))
#define CRB_CMD_CONSUMER_OFFSET_1 (NETXEN_NIC_REG(0x1b0))
#define CRB_CMD_PRODUCER_OFFSET_2 (NETXEN_NIC_REG(0x1b8))
#define CRB_CMD_CONSUMER_OFFSET_2 (NETXEN_NIC_REG(0x1bc))
#define CRB_CMD_PRODUCER_OFFSET_3 (NETXEN_NIC_REG(0x1d0))
#define CRB_CMD_CONSUMER_OFFSET_3 (NETXEN_NIC_REG(0x1d4))
#define CRB_TEMP_STATE (NETXEN_NIC_REG(0x1b4))
#define CRB_V2P_0 (NETXEN_NIC_REG(0x290))
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION (NETXEN_NIC_REG(0x2a0))
#define CRB_SW_INT_MASK_0 (NETXEN_NIC_REG(0x1d8))
#define CRB_SW_INT_MASK_1 (NETXEN_NIC_REG(0x1e0))
#define CRB_SW_INT_MASK_2 (NETXEN_NIC_REG(0x1e4))
#define CRB_SW_INT_MASK_3 (NETXEN_NIC_REG(0x1e8))
#define CRB_FW_CAPABILITIES_1 (NETXEN_CAM_RAM(0x128))
#define CRB_MAC_BLOCK_START (NETXEN_CAM_RAM(0x1c0))
/*
* capabilities register, can be used to selectively enable/disable features
* for backward compability
*/
#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
#define INTR_SCHEME_PERPORT 0x1
#define MSI_MODE_MULTIFUNC 0x1
/* used for ethtool tests */
#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
/*
* CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
* which can be read by the Phantom host to get producer/consumer indexes from
* Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
* registers will be used for the addresses of the ring's shared memory
* on the Phantom.
*/
#define nx_get_temp_val(x) ((x) >> 16)
#define nx_get_temp_state(x) ((x) & 0xffff)
#define nx_encode_temp(val, state) (((val) << 16) | (state))
/*
* Temperature control.
*/
enum {
NX_TEMP_NORMAL = 0x1, /* Normal operating range */
NX_TEMP_WARN, /* Sound alert, temperature getting high */
NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
};
/* Lock IDs for PHY lock */
#define PHY_LOCK_DRIVER 0x44524956

View File

@ -30,7 +30,6 @@
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include "netxen_nic_phan_reg.h"
#include <net/ip.h>

View File

@ -31,8 +31,6 @@
#ifndef __NETXEN_NIC_HW_H_
#define __NETXEN_NIC_HW_H_
#include "netxen_nic_hdr.h"
/* Hardware memory size of 128 meg */
#define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
@ -387,22 +385,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
#define netxen_xg_soft_reset(config_word) \
((config_word) |= 1 << 4)
/* Set promiscuous mode for a GbE interface */
int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
u32 mode);
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
u32 mode);
/* Generic enable for GbE ports. Will detect the speed of the link. */
int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port);
/* Disable a GbE interface */
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter);
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
typedef struct {
unsigned valid;
unsigned start_128M;

View File

@ -32,7 +32,6 @@
#include <linux/delay.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include "netxen_nic_phan_reg.h"
struct crb_addr_pair {
u32 addr;

View File

@ -33,7 +33,6 @@
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
#include "netxen_nic_phan_reg.h"
#include <linux/dma-mapping.h>
#include <linux/if_vlan.h>

View File

@ -1,178 +0,0 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
* Contact Information:
* info@netxen.com
* NetXen Inc,
* 18922 Forge Drive
* Cupertino, CA 95014-0701
*
*/
#ifndef __NIC_PHAN_REG_H_
#define __NIC_PHAN_REG_H_
/*
* CRB Registers or queue message done only at initialization time.
*/
#define NIC_CRB_BASE NETXEN_CAM_RAM(0x200)
#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
#define NIC_CRB_BASE_2 NETXEN_CAM_RAM(0x700)
#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
#define CRB_PHAN_CNTRL_LO_OFFSET NETXEN_NIC_REG(0x00)
#define CRB_PHAN_CNTRL_HI_OFFSET NETXEN_NIC_REG(0x04)
#define CRB_CMD_PRODUCER_OFFSET NETXEN_NIC_REG(0x08)
#define CRB_CMD_CONSUMER_OFFSET NETXEN_NIC_REG(0x0c)
#define CRB_PAUSE_ADDR_LO NETXEN_NIC_REG(0x10)
#define CRB_PAUSE_ADDR_HI NETXEN_NIC_REG(0x14)
#define NX_CDRP_CRB_OFFSET NETXEN_NIC_REG(0x18)
#define NX_ARG1_CRB_OFFSET NETXEN_NIC_REG(0x1c)
#define NX_ARG2_CRB_OFFSET NETXEN_NIC_REG(0x20)
#define NX_ARG3_CRB_OFFSET NETXEN_NIC_REG(0x24)
#define NX_SIGN_CRB_OFFSET NETXEN_NIC_REG(0x28)
#define CRB_CMD_INTR_LOOP NETXEN_NIC_REG(0x20)
#define CRB_CMD_DMA_LOOP NETXEN_NIC_REG(0x24)
#define CRB_RCV_INTR_LOOP NETXEN_NIC_REG(0x28)
#define CRB_RCV_DMA_LOOP NETXEN_NIC_REG(0x2c)
#define CRB_ENABLE_TX_INTR NETXEN_NIC_REG(0x30)
#define CRB_MMAP_ADDR_3 NETXEN_NIC_REG(0x34)
#define CRB_CMDPEG_CMDRING NETXEN_NIC_REG(0x38)
#define CRB_HOST_DUMMY_BUF_ADDR_HI NETXEN_NIC_REG(0x3c)
#define CRB_HOST_DUMMY_BUF_ADDR_LO NETXEN_NIC_REG(0x40)
#define CRB_MMAP_ADDR_0 NETXEN_NIC_REG(0x44)
#define CRB_MMAP_ADDR_1 NETXEN_NIC_REG(0x48)
#define CRB_MMAP_ADDR_2 NETXEN_NIC_REG(0x4c)
#define CRB_CMDPEG_STATE NETXEN_NIC_REG(0x50)
#define CRB_MMAP_SIZE_0 NETXEN_NIC_REG(0x54)
#define CRB_MMAP_SIZE_1 NETXEN_NIC_REG(0x58)
#define CRB_MMAP_SIZE_2 NETXEN_NIC_REG(0x5c)
#define CRB_MMAP_SIZE_3 NETXEN_NIC_REG(0x60)
#define CRB_GLOBAL_INT_COAL NETXEN_NIC_REG(0x64)
#define CRB_INT_COAL_MODE NETXEN_NIC_REG(0x68)
#define CRB_MAX_RCV_BUFS NETXEN_NIC_REG(0x6c)
#define CRB_TX_INT_THRESHOLD NETXEN_NIC_REG(0x70)
#define CRB_RX_PKT_TIMER NETXEN_NIC_REG(0x74)
#define CRB_TX_PKT_TIMER NETXEN_NIC_REG(0x78)
#define CRB_RX_PKT_CNT NETXEN_NIC_REG(0x7c)
#define CRB_RX_TMR_CNT NETXEN_NIC_REG(0x80)
#define CRB_RX_LRO_TIMER NETXEN_NIC_REG(0x84)
#define CRB_RX_LRO_MID_TIMER NETXEN_NIC_REG(0x88)
#define CRB_DMA_MAX_RCV_BUFS NETXEN_NIC_REG(0x8c)
#define CRB_MAX_DMA_ENTRIES NETXEN_NIC_REG(0x90)
#define CRB_XG_STATE NETXEN_NIC_REG(0x94) /* XG Link status */
#define CRB_XG_STATE_P3 NETXEN_NIC_REG(0x98) /* XG PF Link status */
#define CRB_AGENT_TX_SIZE NETXEN_NIC_REG(0x9c)
#define CRB_AGENT_TX_TYPE NETXEN_NIC_REG(0xa0)
#define CRB_AGENT_TX_ADDR NETXEN_NIC_REG(0xa4)
#define CRB_AGENT_TX_MSS NETXEN_NIC_REG(0xa8)
#define CRB_TX_STATE NETXEN_NIC_REG(0xac)
#define CRB_TX_COUNT NETXEN_NIC_REG(0xb0)
#define CRB_RX_STATE NETXEN_NIC_REG(0xb4)
#define CRB_RX_PERF_DEBUG_1 NETXEN_NIC_REG(0xb8)
#define CRB_RX_LRO_CONTROL NETXEN_NIC_REG(0xbc)
#define CRB_RX_LRO_START_NUM NETXEN_NIC_REG(0xc0)
#define CRB_MPORT_MODE NETXEN_NIC_REG(0xc4)
#define CRB_CMD_RING_SIZE NETXEN_NIC_REG(0xc8)
#define CRB_DMA_SHIFT NETXEN_NIC_REG(0xcc)
#define CRB_INT_VECTOR NETXEN_NIC_REG(0xd4)
#define CRB_CTX_RESET NETXEN_NIC_REG(0xd8)
#define CRB_HOST_STS_PROD NETXEN_NIC_REG(0xdc)
#define CRB_HOST_STS_CONS NETXEN_NIC_REG(0xe0)
#define CRB_PEG_CMD_PROD NETXEN_NIC_REG(0xe4)
#define CRB_PF_LINK_SPEED_1 NETXEN_NIC_REG(0xe8)
#define CRB_PF_LINK_SPEED_2 NETXEN_NIC_REG(0xec)
#define CRB_HOST_BUFFER_CONS NETXEN_NIC_REG(0xf0)
#define CRB_JUMBO_BUFFER_PROD NETXEN_NIC_REG(0xf4)
#define CRB_JUMBO_BUFFER_CONS NETXEN_NIC_REG(0xf8)
#define CRB_HOST_DUMMY_BUF NETXEN_NIC_REG(0xfc)
#define CRB_RCVPEG_STATE NETXEN_NIC_REG(0x13c)
#define CRB_CMD_PRODUCER_OFFSET_1 NETXEN_NIC_REG(0x1ac)
#define CRB_CMD_CONSUMER_OFFSET_1 NETXEN_NIC_REG(0x1b0)
#define CRB_CMD_PRODUCER_OFFSET_2 NETXEN_NIC_REG(0x1b8)
#define CRB_CMD_CONSUMER_OFFSET_2 NETXEN_NIC_REG(0x1bc)
#define CRB_CMD_PRODUCER_OFFSET_3 NETXEN_NIC_REG(0x1d0)
#define CRB_CMD_CONSUMER_OFFSET_3 NETXEN_NIC_REG(0x1d4)
#define CRB_TEMP_STATE NETXEN_NIC_REG(0x1b4)
#define CRB_V2P_0 NETXEN_NIC_REG(0x290)
#define CRB_V2P_1 NETXEN_NIC_REG(0x294)
#define CRB_V2P_2 NETXEN_NIC_REG(0x298)
#define CRB_V2P_3 NETXEN_NIC_REG(0x29c)
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION NETXEN_NIC_REG(0x2a0)
#define CRB_SW_INT_MASK_0 NETXEN_NIC_REG(0x1d8)
#define CRB_SW_INT_MASK_1 NETXEN_NIC_REG(0x1e0)
#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4)
#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8)
#define CRB_FW_CAPABILITIES_1 NETXEN_CAM_RAM(0x128)
#define CRB_MAC_BLOCK_START NETXEN_CAM_RAM(0x1c0)
/*
* capabilities register, can be used to selectively enable/disable features
* for backward compability
*/
#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
#define INTR_SCHEME_PERPORT 0x1
#define MSI_MODE_MULTIFUNC 0x1
/* used for ethtool tests */
#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
/*
* CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
* which can be read by the Phantom host to get producer/consumer indexes from
* Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
* registers will be used for the addresses of the ring's shared memory
* on the Phantom.
*/
#define nx_get_temp_val(x) ((x) >> 16)
#define nx_get_temp_state(x) ((x) & 0xffff)
#define nx_encode_temp(val, state) (((val) << 16) | (state))
/*
* CRB registers used by the receive peg logic.
*/
struct netxen_recv_crb {
u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
u32 sw_int_mask[NUM_STS_DESC_RINGS];
};
/*
* Temperature control.
*/
enum {
NX_TEMP_NORMAL = 0x1, /* Normal operating range */
NX_TEMP_WARN, /* Sound alert, temperature getting high */
NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
};
#endif /* __NIC_PHAN_REG_H_ */