mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 13:13:57 +08:00
[media] cx23885: add basic DVB-S2 support for Hauppauge HVR-4400
Add basic DVB-S2 support for the Hauppauge HVR-4400 PCIe board. Thanks to Antti Palosaari and Devin Heitmueller for their suggestions and testing. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
parent
0176fd4d25
commit
7c62f5a11c
@ -26,6 +26,8 @@ config VIDEO_CX23885
|
||||
select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
|
||||
|
@ -572,7 +572,11 @@ struct cx23885_board cx23885_boards[] = {
|
||||
[CX23885_BOARD_PROF_8000] = {
|
||||
.name = "Prof Revolution DVB-S2 8000",
|
||||
.portb = CX23885_MPEG_DVB,
|
||||
}
|
||||
},
|
||||
[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
|
||||
.name = "Hauppauge WinTV-HVR4400",
|
||||
.portb = CX23885_MPEG_DVB,
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
|
||||
|
||||
@ -788,6 +792,22 @@ struct cx23885_subid cx23885_subids[] = {
|
||||
.subvendor = 0x8000,
|
||||
.subdevice = 0x3034,
|
||||
.card = CX23885_BOARD_PROF_8000,
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0xc108,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0xc138,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0xc12a,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
|
||||
}, {
|
||||
.subvendor = 0x0070,
|
||||
.subdevice = 0xc1f8,
|
||||
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
|
||||
@ -1301,6 +1321,16 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
|
||||
/* enable irq */
|
||||
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR4400:
|
||||
/* GPIO-8 tda10071 demod reset */
|
||||
|
||||
/* Put the parts into reset and back */
|
||||
cx23885_gpio_enable(dev, GPIO_8, 1);
|
||||
cx23885_gpio_clear(dev, GPIO_8);
|
||||
mdelay(100);
|
||||
cx23885_gpio_set(dev, GPIO_8);
|
||||
mdelay(100);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -1509,6 +1539,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1210:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1850:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1290:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR4400:
|
||||
if (dev->i2c_bus[0].i2c_rc == 0)
|
||||
hauppauge_eeprom(dev, eeprom+0xc0);
|
||||
break;
|
||||
@ -1581,6 +1612,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
||||
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR4400:
|
||||
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
|
||||
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1250:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
|
||||
|
@ -66,6 +66,8 @@
|
||||
#include "stv090x.h"
|
||||
#include "stb6100.h"
|
||||
#include "stb6100_cfg.h"
|
||||
#include "tda10071.h"
|
||||
#include "a8293.h"
|
||||
|
||||
static unsigned int debug;
|
||||
|
||||
@ -659,6 +661,20 @@ static struct mt2063_config terratec_mt2063_config[] = {
|
||||
},
|
||||
};
|
||||
|
||||
static const struct tda10071_config hauppauge_tda10071_config = {
|
||||
.i2c_address = 0x05,
|
||||
.tuner_i2c_addr = 0x54,
|
||||
.i2c_wr_max = 64,
|
||||
.ts_mode = TDA10071_TS_SERIAL,
|
||||
.spec_inv = 0,
|
||||
.xtal = 40444000, /* 40.444 MHz */
|
||||
.pll_multiplier = 20,
|
||||
};
|
||||
|
||||
static const struct a8293_config hauppauge_a8293_config = {
|
||||
.i2c_addr = 0x0b,
|
||||
};
|
||||
|
||||
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
|
||||
{
|
||||
struct cx23885_dev *dev = (struct cx23885_dev *)device;
|
||||
@ -1242,6 +1258,17 @@ static int dvb_register(struct cx23885_tsport *port)
|
||||
fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
|
||||
}
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR4400:
|
||||
i2c_bus = &dev->i2c_bus[0];
|
||||
fe0->dvb.frontend = dvb_attach(tda10071_attach,
|
||||
&hauppauge_tda10071_config,
|
||||
&i2c_bus->i2c_adap);
|
||||
if (fe0->dvb.frontend != NULL) {
|
||||
dvb_attach(a8293_attach, fe0->dvb.frontend,
|
||||
&i2c_bus->i2c_adap,
|
||||
&hauppauge_a8293_config);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
|
||||
" isn't supported yet\n",
|
||||
|
@ -91,6 +91,7 @@
|
||||
#define CX23885_BOARD_TEVII_S471 35
|
||||
#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
|
||||
#define CX23885_BOARD_PROF_8000 37
|
||||
#define CX23885_BOARD_HAUPPAUGE_HVR4400 38
|
||||
|
||||
#define GPIO_0 0x00000001
|
||||
#define GPIO_1 0x00000002
|
||||
|
Loading…
Reference in New Issue
Block a user