mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-30 08:04:13 +08:00
batman-adv: mcast: add MRD + routable IPv4 multicast with bridges support
This adds support for routable IPv4 multicast addresses (224.0.0.0/4, excluding 224.0.0.0/24) in bridged setups. This utilizes the Multicast Router Discovery (MRD, RFC4286) support in the Linux bridge. batman-adv will now query the Linux bridge for IPv4 multicast routers, which the bridge has previously learned about via MRD. This allows us to then safely send routable IPv4 multicast packets in bridged setups to multicast listeners and multicast routers only. Before we had to flood such packets to avoid potential multicast packet loss to IPv4 multicast routers, which we were not able to detect before. With the bridge MRD integration, we are now also able to perform more fine-grained detection of IPv6 multicast routers in bridged setups: Before we were "guessing" IPv6 multicast routers by looking up multicast listeners for the link-local All Routers multicast address (ff02::2), which every IPv6 multicast router is listening to. However this would also include more nodes than necessary: For instance nodes which are just a router for unicast, but not multicast would be included, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This commit is contained in:
parent
4cbf055002
commit
7a68cc16b8
@ -193,53 +193,22 @@ static u8 batadv_mcast_mla_rtr_flags_softif_get(struct batadv_priv *bat_priv,
|
||||
* BATADV_MCAST_WANT_NO_RTR6: No IPv6 multicast router is present
|
||||
* The former two OR'd: no multicast router is present
|
||||
*/
|
||||
#if IS_ENABLED(CONFIG_IPV6)
|
||||
static u8 batadv_mcast_mla_rtr_flags_bridge_get(struct batadv_priv *bat_priv,
|
||||
struct net_device *bridge)
|
||||
{
|
||||
struct list_head bridge_mcast_list = LIST_HEAD_INIT(bridge_mcast_list);
|
||||
struct net_device *dev = bat_priv->soft_iface;
|
||||
struct br_ip_list *br_ip_entry, *tmp;
|
||||
u8 flags = BATADV_MCAST_WANT_NO_RTR6;
|
||||
int ret;
|
||||
u8 flags = BATADV_NO_FLAGS;
|
||||
|
||||
if (!bridge)
|
||||
return BATADV_MCAST_WANT_NO_RTR4 | BATADV_MCAST_WANT_NO_RTR6;
|
||||
|
||||
/* TODO: ask the bridge if a multicast router is present (the bridge
|
||||
* is capable of performing proper RFC4286 multicast router
|
||||
* discovery) instead of searching for a ff02::2 listener here
|
||||
*/
|
||||
ret = br_multicast_list_adjacent(dev, &bridge_mcast_list);
|
||||
if (ret < 0)
|
||||
return BATADV_NO_FLAGS;
|
||||
|
||||
list_for_each_entry_safe(br_ip_entry, tmp, &bridge_mcast_list, list) {
|
||||
/* the bridge snooping does not maintain IPv4 link-local
|
||||
* addresses - therefore we won't find any IPv4 multicast router
|
||||
* address here, only IPv6 ones
|
||||
*/
|
||||
if (br_ip_entry->addr.proto == htons(ETH_P_IPV6) &&
|
||||
ipv6_addr_is_ll_all_routers(&br_ip_entry->addr.dst.ip6))
|
||||
flags &= ~BATADV_MCAST_WANT_NO_RTR6;
|
||||
|
||||
list_del(&br_ip_entry->list);
|
||||
kfree(br_ip_entry);
|
||||
}
|
||||
if (!br_multicast_has_router_adjacent(dev, ETH_P_IP))
|
||||
flags |= BATADV_MCAST_WANT_NO_RTR4;
|
||||
if (!br_multicast_has_router_adjacent(dev, ETH_P_IPV6))
|
||||
flags |= BATADV_MCAST_WANT_NO_RTR6;
|
||||
|
||||
return flags;
|
||||
}
|
||||
#else
|
||||
static inline u8
|
||||
batadv_mcast_mla_rtr_flags_bridge_get(struct batadv_priv *bat_priv,
|
||||
struct net_device *bridge)
|
||||
{
|
||||
if (bridge)
|
||||
return BATADV_NO_FLAGS;
|
||||
else
|
||||
return BATADV_MCAST_WANT_NO_RTR4 | BATADV_MCAST_WANT_NO_RTR6;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* batadv_mcast_mla_rtr_flags_get() - get multicast router flags
|
||||
|
Loading…
Reference in New Issue
Block a user