From 78f87df2b4f8760954d7d80603d0cfcbd4759683 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 17 Mar 2014 15:53:07 +0100 Subject: [PATCH] mmc: mmci: Use the common mmc DT parser Let mmci DT parser only handle the specific bindings related to mmci and extend the DT support by converting to the common mmc DT parser. While both DT and platform data exist, DT takes precedence. If there are supplied DT data, the card detect and write protect GPIOS are enforced to be provided through it. Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 92 +++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 59 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2ce9111c4627..c522308a7343 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1386,12 +1386,9 @@ static struct mmc_host_ops mmci_ops = { .start_signal_voltage_switch = mmci_sig_volt_switch, }; -#ifdef CONFIG_OF static void mmci_dt_populate_generic_pdata(struct device_node *np, struct mmci_platform_data *pdata) { - int bus_width = 0; - if (of_get_property(np, "st,sig-dir-dat0", NULL)) pdata->sigdir |= MCI_ST_DATA0DIREN; if (of_get_property(np, "st,sig-dir-dat2", NULL)) @@ -1404,46 +1401,22 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, pdata->sigdir |= MCI_ST_CMDDIREN; if (of_get_property(np, "st,sig-pin-fbclk", NULL)) pdata->sigdir |= MCI_ST_FBCLKEN; +} - pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); - pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); +static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) +{ + int ret = mmc_of_parse(mmc); - if (of_get_property(np, "cd-inverted", NULL)) - pdata->cd_invert = true; - else - pdata->cd_invert = false; - - of_property_read_u32(np, "max-frequency", &pdata->f_max); - if (!pdata->f_max) - pr_warn("%s has no 'max-frequency' property\n", np->full_name); + if (ret) + return ret; if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) - pdata->capabilities |= MMC_CAP_MMC_HIGHSPEED; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; if (of_get_property(np, "mmc-cap-sd-highspeed", NULL)) - pdata->capabilities |= MMC_CAP_SD_HIGHSPEED; + mmc->caps |= MMC_CAP_SD_HIGHSPEED; - of_property_read_u32(np, "bus-width", &bus_width); - switch (bus_width) { - case 0 : - /* No bus-width supplied. */ - break; - case 4 : - pdata->capabilities |= MMC_CAP_4_BIT_DATA; - break; - case 8 : - pdata->capabilities |= MMC_CAP_8_BIT_DATA; - break; - default : - pr_warn("%s: Unsupported bus width\n", np->full_name); - } + return 0; } -#else -static void mmci_dt_populate_generic_pdata(struct device_node *np, - struct mmci_platform_data *pdata) -{ - return; -} -#endif static int mmci_probe(struct amba_device *dev, const struct amba_id *id) @@ -1474,6 +1447,10 @@ static int mmci_probe(struct amba_device *dev, if (!mmc) return -ENOMEM; + ret = mmci_of_parse(np, mmc); + if (ret) + goto host_free; + host = mmc_priv(mmc); host->mmc = mmc; @@ -1526,14 +1503,15 @@ static int mmci_probe(struct amba_device *dev, else mmc->f_min = DIV_ROUND_UP(host->mclk, 512); /* - * If the platform data supplies a maximum operating - * frequency, this takes precedence. Else, we fall back - * to using the module parameter, which has a (low) - * default value in case it is not specified. Either - * value must not exceed the clock rate into the block, - * of course. + * If no maximum operating frequency is supplied, fall back to use + * the module parameter, which has a (low) default value in case it + * is not specified. Either value must not exceed the clock rate into + * the block, of course. Also note that DT takes precedence over + * platform data. */ - if (plat->f_max) + if (mmc->f_max) + mmc->f_max = min(host->mclk, mmc->f_max); + else if (plat->f_max) mmc->f_max = min(host->mclk, plat->f_max); else mmc->f_max = min(host->mclk, fmax); @@ -1546,11 +1524,14 @@ static int mmci_probe(struct amba_device *dev, else if (plat->ocr_mask) dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); - mmc->caps = plat->capabilities; - mmc->caps2 = plat->capabilities2; - if (!plat->cd_invert) - mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; - mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + /* DT takes precedence over platform data. */ + mmc->caps = np ? mmc->caps : plat->capabilities; + mmc->caps2 = np ? mmc->caps2 : plat->capabilities2; + if (!np) { + if (!plat->cd_invert) + mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } if (variant->busy_detect) { mmci_ops.card_busy = mmci_card_busy; @@ -1562,7 +1543,7 @@ static int mmci_probe(struct amba_device *dev, mmc->ops = &mmci_ops; /* We support these PM capabilities. */ - mmc->pm_caps = MMC_PM_KEEP_POWER; + mmc->pm_caps |= MMC_PM_KEEP_POWER; /* * We can do SGIO @@ -1599,20 +1580,13 @@ static int mmci_probe(struct amba_device *dev, writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); - if (plat->gpio_cd == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto clk_disable; - } - if (gpio_is_valid(plat->gpio_cd)) { + /* If DT, cd/wp gpios must be supplied through it. */ + if (!np && gpio_is_valid(plat->gpio_cd)) { ret = mmc_gpio_request_cd(mmc, plat->gpio_cd, 0); if (ret) goto clk_disable; } - if (plat->gpio_wp == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto clk_disable; - } - if (gpio_is_valid(plat->gpio_wp)) { + if (!np && gpio_is_valid(plat->gpio_wp)) { ret = mmc_gpio_request_ro(mmc, plat->gpio_wp); if (ret) goto clk_disable;