From d2dcd9083f101584e029cbd4f0e1a4e573170d43 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Fri, 9 Mar 2012 06:27:12 +0530 Subject: [PATCH 0001/1098] logfs: destroy the reserved inodes while unmounting We were assuming that the evict_inode() would never be called on reserved inodes. However, (after the commit 8e22c1a4e logfs: get rid of magical inodes) while unmounting the file system, in put_super, we call iput() on all of the reserved inodes. The following simple test used to cause a kernel panic on LogFS: 1. Mount a LogFS file system on /mnt 2. Create a file $ touch /mnt/a 3. Try to unmount the FS $ umount /mnt The simple fix would be to drop the assumption and properly destroy the reserved inodes. Signed-off-by: Prasad Joshi --- fs/logfs/inode.c | 16 ++++++++++++++++ fs/logfs/readwrite.c | 1 - fs/logfs/segment.c | 2 +- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index a422f42238b2..df093d9e4da1 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -156,10 +156,26 @@ static void __logfs_destroy_inode(struct inode *inode) call_rcu(&inode->i_rcu, logfs_i_callback); } +static void __logfs_destroy_meta_inode(struct inode *inode) +{ + struct logfs_inode *li = logfs_inode(inode); + BUG_ON(li->li_block); + call_rcu(&inode->i_rcu, logfs_i_callback); +} + static void logfs_destroy_inode(struct inode *inode) { struct logfs_inode *li = logfs_inode(inode); + if (inode->i_ino < LOGFS_RESERVED_INOS) { + /* + * The reserved inodes are never destroyed unless we are in + * unmont path. + */ + __logfs_destroy_meta_inode(inode); + return; + } + BUG_ON(list_empty(&li->li_freeing_list)); spin_lock(&logfs_inode_lock); li->li_refcount--; diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c index e3ab5e5a904c..c8ea8664699c 100644 --- a/fs/logfs/readwrite.c +++ b/fs/logfs/readwrite.c @@ -2189,7 +2189,6 @@ void logfs_evict_inode(struct inode *inode) return; } - BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS); page = inode_to_page(inode); BUG_ON(!page); /* FIXME: Use emergency page */ logfs_put_write_page(page); diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c index e28d090c98d6..038da0991794 100644 --- a/fs/logfs/segment.c +++ b/fs/logfs/segment.c @@ -886,7 +886,7 @@ static struct logfs_area *alloc_area(struct super_block *sb) static void map_invalidatepage(struct page *page, unsigned long l) { - BUG(); + return; } static int map_releasepage(struct page *page, gfp_t g) From cd8bfa9c8a13cf3facc5731da17e10188b3795d1 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 2 Apr 2012 09:23:04 +0530 Subject: [PATCH 0002/1098] logfs: initialize the number of iovecs in bio This fixes the following crash when a LogFS file system, created on a encrypted LVM volume, was mounted [ 526.548034] BUG: unable to handle kernel NULL pointer dereference at [ 526.550106] IP: [] memcpy+0xb/0x120 [ 526.551008] PGD bd60067 PUD 1778d067 PMD 0 [ 526.551783] Oops: 0000 [#1] SMP Pid: 2043, comm: mount RIP: 0010:[] [] memcpy+0xb/0x120 Call Trace: kcryptd_io_read+0xdb/0x100 crypt_map+0xfd/0x190 __map_bio+0x48/0x150 __split_and_process_bio+0x51b/0x630 dm_request+0x138/0x230 generic_make_request+0xca/0x100 submit_bio+0x87/0x110 sync_request+0xdd/0x120 [logfs] bdev_readpage+0x2e/0x70 [logfs] do_read_cache_page+0x82/0x180 logfs_mount+0x2ad/0x770 [logfs] mount_fs+0x47/0x1c0 vfs_kern_mount+0x72/0x110 do_kern_mount+0x54/0x110 do_mount+0x520/0x7f0 sys_mount+0x90/0xe0 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42292 Reported-by: Witold Baryluk Signed-off-by: Prasad Joshi --- fs/logfs/dev_bdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index df0de27c2733..ea29df36893d 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -26,6 +26,7 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) struct completion complete; bio_init(&bio); + bio.bi_max_vecs = 1; bio.bi_io_vec = &bio_vec; bio_vec.bv_page = page; bio_vec.bv_len = PAGE_SIZE; From 2bbc89a8e9c652ee71c6c3b2e0679b7ecedb1a09 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 30 May 2012 15:49:59 +0200 Subject: [PATCH 0003/1098] m68k: Use Kbuild logic to import asm-generic headers Replace all headers files that just include their asm-generic version by Kbuild logic Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 23 +++++++++++++++++++++++ arch/m68k/include/asm/bitsperlong.h | 1 - arch/m68k/include/asm/cputime.h | 6 ------ arch/m68k/include/asm/device.h | 7 ------- arch/m68k/include/asm/emergency-restart.h | 6 ------ arch/m68k/include/asm/errno.h | 6 ------ arch/m68k/include/asm/futex.h | 6 ------ arch/m68k/include/asm/ioctl.h | 1 - arch/m68k/include/asm/ipcbuf.h | 1 - arch/m68k/include/asm/irq_regs.h | 1 - arch/m68k/include/asm/kdebug.h | 1 - arch/m68k/include/asm/kmap_types.h | 6 ------ arch/m68k/include/asm/kvm_para.h | 1 - arch/m68k/include/asm/local.h | 6 ------ arch/m68k/include/asm/local64.h | 1 - arch/m68k/include/asm/mman.h | 1 - arch/m68k/include/asm/mutex.h | 9 --------- arch/m68k/include/asm/percpu.h | 6 ------ arch/m68k/include/asm/resource.h | 6 ------ arch/m68k/include/asm/scatterlist.h | 6 ------ arch/m68k/include/asm/siginfo.h | 6 ------ arch/m68k/include/asm/statfs.h | 6 ------ arch/m68k/include/asm/topology.h | 6 ------ arch/m68k/include/asm/xor.h | 1 - 24 files changed, 23 insertions(+), 97 deletions(-) delete mode 100644 arch/m68k/include/asm/bitsperlong.h delete mode 100644 arch/m68k/include/asm/cputime.h delete mode 100644 arch/m68k/include/asm/device.h delete mode 100644 arch/m68k/include/asm/emergency-restart.h delete mode 100644 arch/m68k/include/asm/errno.h delete mode 100644 arch/m68k/include/asm/futex.h delete mode 100644 arch/m68k/include/asm/ioctl.h delete mode 100644 arch/m68k/include/asm/ipcbuf.h delete mode 100644 arch/m68k/include/asm/irq_regs.h delete mode 100644 arch/m68k/include/asm/kdebug.h delete mode 100644 arch/m68k/include/asm/kmap_types.h delete mode 100644 arch/m68k/include/asm/kvm_para.h delete mode 100644 arch/m68k/include/asm/local.h delete mode 100644 arch/m68k/include/asm/local64.h delete mode 100644 arch/m68k/include/asm/mman.h delete mode 100644 arch/m68k/include/asm/mutex.h delete mode 100644 arch/m68k/include/asm/percpu.h delete mode 100644 arch/m68k/include/asm/resource.h delete mode 100644 arch/m68k/include/asm/scatterlist.h delete mode 100644 arch/m68k/include/asm/siginfo.h delete mode 100644 arch/m68k/include/asm/statfs.h delete mode 100644 arch/m68k/include/asm/topology.h delete mode 100644 arch/m68k/include/asm/xor.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index eafa2539a8ee..4d1f8fa33091 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,4 +1,27 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += device.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += futex.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local64.h +generic-y += local.h +generic-y += mman.h +generic-y += mutex.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += topology.h generic-y += word-at-a-time.h +generic-y += xor.h diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b2..000000000000 --- a/arch/m68k/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h deleted file mode 100644 index c79c5e892305..000000000000 --- a/arch/m68k/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include - -#endif /* __M68K_CPUTIME_H */ diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/arch/m68k/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/m68k/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h deleted file mode 100644 index 0d4e188d6ef6..000000000000 --- a/arch/m68k/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include - -#endif /* _M68K_ERRNO_H */ diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/arch/m68k/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/arch/m68k/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0..000000000000 --- a/arch/m68k/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/m68k/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/arch/m68k/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h deleted file mode 100644 index 3413cc1390ec..000000000000 --- a/arch/m68k/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -#include - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b957..000000000000 --- a/arch/m68k/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h deleted file mode 100644 index 6c259263e1f0..000000000000 --- a/arch/m68k/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/m68k/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h deleted file mode 100644 index 8eebf89f5ab1..000000000000 --- a/arch/m68k/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/arch/m68k/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h deleted file mode 100644 index 0859d048faf5..000000000000 --- a/arch/m68k/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h deleted file mode 100644 index e7d35019f337..000000000000 --- a/arch/m68k/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include - -#endif /* _M68K_RESOURCE_H */ diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h deleted file mode 100644 index 312505452a1e..000000000000 --- a/arch/m68k/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h deleted file mode 100644 index 851d3d784b53..000000000000 --- a/arch/m68k/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SIGINFO_H -#define _M68K_SIGINFO_H - -#include - -#endif diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h deleted file mode 100644 index 08d93f14e061..000000000000 --- a/arch/m68k/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include - -#endif /* _M68K_STATFS_H */ diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h deleted file mode 100644 index ca173e9f26ff..000000000000 --- a/arch/m68k/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/arch/m68k/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include From 2ef0d3e64f0ba9aed72c2ddd410aea83cd3261ab Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 30 May 2012 19:50:04 +0200 Subject: [PATCH 0004/1098] m68k: Use asm-generic version of The extra definition for BITS_PER_LONG we had is also indirectly provided by , via and Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/types.h | 22 ---------------------- 2 files changed, 1 insertion(+), 22 deletions(-) delete mode 100644 arch/m68k/include/asm/types.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 4d1f8fa33091..064f86743b34 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -23,5 +23,6 @@ generic-y += scatterlist.h generic-y += siginfo.h generic-y += statfs.h generic-y += topology.h +generic-y += types.h generic-y += word-at-a-time.h generic-y += xor.h diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h deleted file mode 100644 index 89705adcbd52..000000000000 --- a/arch/m68k/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ From 54503b1da74afdb38c730ad6413dbe54ce119134 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:39:13 +0200 Subject: [PATCH 0005/1098] m68knommu: Clean up printing of sections - Remove casts and unneeded address-of ('&') operators, - Use %p to format pointers, %lx to format unsigned longs. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/kernel/setup_no.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 7dc186b7a85f..8a624ecf86b8 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); #endif - pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end); + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", + _stext, _etext, _sdata, _edata, _sbss, _ebss); + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", + _ebss, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; From f2378ed90572aeeecded30fd3754575c2ff1e55f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 17:24:47 +0200 Subject: [PATCH 0006/1098] m68k: Remove duplicate FPU config option It's also defined in arch/m68k/Kconfig.cpu Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 147120128260..bc8cc504dee1 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -62,9 +62,6 @@ config CPU_HAS_NO_MULDIV64 config CPU_HAS_ADDRESS_SPACES bool -config FPU - bool - config HZ int default 1000 if CLEOPATRA From 022613e0b0753f1261454dea9b07c2e959363af7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 17:26:35 +0200 Subject: [PATCH 0007/1098] m68k: Move CPU_HAS_* config options They belong together with the CPU selection Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig | 9 --------- arch/m68k/Kconfig.cpu | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index bc8cc504dee1..87b504cfe001 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -53,15 +53,6 @@ config ZONE_DMA bool default y -config CPU_HAS_NO_BITFIELDS - bool - -config CPU_HAS_NO_MULDIV64 - bool - -config CPU_HAS_ADDRESS_SPACES - bool - config HZ int default 1000 if CLEOPATRA diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 2b53254ad994..6cd8c1a32893 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -360,6 +360,15 @@ config NODES_SHIFT default "3" depends on !SINGLE_MEMORY_CHUNK +config CPU_HAS_NO_BITFIELDS + bool + +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_ADDRESS_SPACES + bool + config FPU bool From 5df58f3aac58bb0f08fa205a006c6b7840cd7ac4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 18:35:13 +0200 Subject: [PATCH 0008/1098] m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/delay.h | 2 +- arch/m68k/lib/muldi3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h index 9c09becfd4c9..12d8fe4f1d30 100644 --- a/arch/m68k/include/asm/delay.h +++ b/arch/m68k/include/asm/delay.h @@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops) extern void __bad_udelay(void); -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 /* * The simpler m68k and ColdFire processors do not have a 32*32->64 * multiply instruction. So we need to handle them a little differently. diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 79e928a525d0..ee5f0b1b5c5d 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 #define SI_TYPE_SIZE 32 #define __BITS4 (SI_TYPE_SIZE / 4) From 9f1f118035b2d28bb741844537b9ee87705b4c6e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 19:37:52 +0200 Subject: [PATCH 0009/1098] m68k: Introduce config option CPU_HAS_NO_UNALIGNED Use CONFIG_CPU_HAS_NO_UNALIGNED instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 5 +++++ arch/m68k/include/asm/unaligned.h | 4 ++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 6cd8c1a32893..c4ed65081475 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -27,6 +27,7 @@ config COLDFIRE select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM endchoice @@ -37,6 +38,7 @@ config M68000 bool select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM help The Freescale (was Motorola) 68000 CPU is the first generation of @@ -366,6 +368,9 @@ config CPU_HAS_NO_BITFIELDS config CPU_HAS_NO_MULDIV64 bool +config CPU_HAS_NO_UNALIGNED + bool + config CPU_HAS_ADDRESS_SPACES bool diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h index f4043ae63db1..2b3ca0bf7a0d 100644 --- a/arch/m68k/include/asm/unaligned.h +++ b/arch/m68k/include/asm/unaligned.h @@ -2,7 +2,7 @@ #define _ASM_M68K_UNALIGNED_H -#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000) +#ifdef CONFIG_CPU_HAS_NO_UNALIGNED #include #include #include @@ -12,7 +12,7 @@ #else /* - * The m68k can do unaligned accesses itself. + * The m68k can do unaligned accesses itself. */ #include #include From 7df0d27f3d78282e9ab97da060e85f53a5f556b5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 19:39:39 +0200 Subject: [PATCH 0010/1098] m68k: CPU32 does not support unaligned accesses Hence select CPU_HAS_NO_UNALIGNED Reported-by: Philippe De Muyter Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index c4ed65081475..d4f3a9839cff 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -50,6 +50,7 @@ config M68000 config MCPU32 bool select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_UNALIGNED help The Freescale (was then Motorola) CPU32 is a CPU core that is based on the 68020 processor. For the most part it is used in From dffc5837d80451e7fa3505ddc2e6c2fd4546641f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 7 Jun 2012 10:57:07 +0200 Subject: [PATCH 0011/1098] m68k: Remove five unused headers There are five entirely unused headers in arch/m68k/include/asm. Nothing includes these headers. And a few tests found no hits for the things they provide (which makes sense). MC68332.h, mac_mouse.h, and mcfmbus.h are all unused since at least v2.6.12-rc2 (I didn't bother looking further back than that). apollodma.h is unused since v2.6.19: commit 2ed0ce5b57950a620155433c62a5a02a067f1376 ("m68k/Apollo: Remove obsolete arch/m68k/apollo/dma.c") removed the last file interested in that header. And everything interested in was removed in the v2.6.28 release cycle. The last occurrence of "sbus.h" was deleted with commit 0c0db98b50ed1217c0dbf4051722034ba314d06e ("sparc: Remove Documentation/sparc/sbus_drivers.txt"). I'm not sure whether anything relevant for m68k was included in v2.6.27, but it doesn't really matter. Signed-off-by: Paul Bolle Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/MC68332.h | 152 ------------------ arch/m68k/include/asm/apollodma.h | 248 ------------------------------ arch/m68k/include/asm/mac_mouse.h | 23 --- arch/m68k/include/asm/mcfmbus.h | 77 ---------- arch/m68k/include/asm/sbus.h | 45 ------ 5 files changed, 545 deletions(-) delete mode 100644 arch/m68k/include/asm/MC68332.h delete mode 100644 arch/m68k/include/asm/apollodma.h delete mode 100644 arch/m68k/include/asm/mac_mouse.h delete mode 100644 arch/m68k/include/asm/mcfmbus.h delete mode 100644 arch/m68k/include/asm/sbus.h diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a2..000000000000 --- a/arch/m68k/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h deleted file mode 100644 index 954adc851adb..000000000000 --- a/arch/m68k/include/asm/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h deleted file mode 100644 index 39a5c292eaee..000000000000 --- a/arch/m68k/include/asm/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2c..000000000000 --- a/arch/m68k/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h deleted file mode 100644 index bfe3ba147f2e..000000000000 --- a/arch/m68k/include/asm/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif From dfe1d26d4a90287ede6b5376967375e1f8af3434 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 8 Jun 2012 15:43:00 +1000 Subject: [PATCH 0012/1098] m68knommu: Allow ColdFire CPUs to use unaligned accesses All of the current Linux supported ColdFire CPUs handle unaligned memory accesses. So remove the CONFIG_CPU_HAS_NO_UNALIGNED option selection for ColdFire. If we ever support a specific ColdFire CPU that does not support unaligned accesses then we can insert the CONFIG_CPU_HAS_NO_UNALIGNED for that specific CPU type. Signed-off-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig.cpu | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index d4f3a9839cff..06fa0c37ab6e 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -27,7 +27,6 @@ config COLDFIRE select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 - select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM endchoice From 363737d66427c18edb321a06933ac999d9ce5d7f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 22:39:21 +0200 Subject: [PATCH 0013/1098] mtd/uclinux: Use generic __bss_stop instead of _ebss The standard (see BSS_SECTION() in and ) symbol for the end of BSS is __bss_stop. This allows to remove all local declarations that have been added to several architectures just to please CONFIG_MTD_UCLINUX. Signed-off-by: Geert Uytterhoeven Acked-by: Paul Mundt Acked-by: Mike Frysinger Acked-by: Michal Simek Acked-by: Greg Ungerer --- arch/blackfin/kernel/setup.c | 1 - arch/microblaze/include/asm/sections.h | 4 ---- arch/microblaze/kernel/microblaze_ksyms.c | 3 --- arch/microblaze/kernel/setup.c | 4 ++-- arch/microblaze/kernel/vmlinux.lds.S | 1 - arch/sh/include/asm/sections.h | 1 - arch/sh/kernel/setup.c | 2 +- arch/sh/kernel/sh_ksyms_32.c | 1 - arch/sh/kernel/vmlinux.lds.S | 1 - arch/sh/lib/mcount.S | 8 +++----- drivers/mtd/maps/uclinux.c | 5 ++--- 11 files changed, 8 insertions(+), 23 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index ada8f0fc71e4..fb96e607adcf 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; -unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h index 4487e150b455..c07ed5d2a820 100644 --- a/arch/microblaze/include/asm/sections.h +++ b/arch/microblaze/include/asm/sections.h @@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[]; extern unsigned long __ivt_start[], __ivt_end[]; extern char _etext[], _stext[]; -# ifdef CONFIG_MTD_UCLINUX -extern char *_ebss; -# endif - extern u32 _fdt_start[], _fdt_end[]; # endif /* !__ASSEMBLY__ */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bb4907c828dc..2b25bcf05c00 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -21,9 +21,6 @@ #include #include -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 16d8dfd9094b..4da971d4392f 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, BUG_ON(romfs_size < 0); /* What else can we do? */ printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + romfs_size, romfs_base, (unsigned)&__bss_stop); printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 109e9d86ade4..936d01a689d7 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -131,7 +131,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 4a5350037c8f..1b6199740e98 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -6,7 +6,6 @@ extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; -extern char _ebss[]; extern char __start_eh_frame[], __stop_eh_frame[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7b57bf1dc855..ebe7a7d97215 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; bss_resource.start = virt_to_phys(__bss_start); - bss_resource.end = virt_to_phys(_ebss)-1; + bss_resource.end = virt_to_phys(__bss_stop)-1; #ifdef CONFIG_CMDLINE_OVERWRITE strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 3896f26efa4a..2a0a596ebf67 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c98905f71e28..db88cbf9eafd 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -78,7 +78,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; BSS_SECTION(0, PAGE_SIZE, 4) - _ebss = .; /* uClinux MTD sucks */ _end = . ; STABS_DEBUG diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 84a57761f17e..60164e65d665 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -39,7 +39,7 @@ * * Make sure the stack pointer contains a valid address. Valid * addresses for kernel stacks are anywhere after the bss - * (after _ebss) and anywhere in init_thread_union (init_stack). + * (after __bss_stop) and anywhere in init_thread_union (init_stack). */ #define STACK_CHECK() \ mov #(THREAD_SIZE >> 10), r0; \ @@ -60,7 +60,7 @@ cmp/hi r2, r1; \ bf stack_panic; \ \ - /* If sp > _ebss then we're OK. */ \ + /* If sp > __bss_stop then we're OK. */ \ mov.l .L_ebss, r1; \ cmp/hi r1, r15; \ bt 1f; \ @@ -70,7 +70,7 @@ cmp/hs r1, r15; \ bf stack_panic; \ \ - /* If sp > init_stack && sp < _ebss, not OK. */ \ + /* If sp > init_stack && sp < __bss_stop, not OK. */ \ add r0, r1; \ cmp/hs r1, r15; \ bt stack_panic; \ @@ -292,8 +292,6 @@ stack_panic: nop .align 2 -.L_ebss: - .long _ebss .L_init_thread_union: .long init_thread_union .Lpanic: diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index cfff454f628b..c3bb304eca07 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -19,14 +19,13 @@ #include #include #include +#include /****************************************************************************/ -extern char _ebss; - struct map_info uclinux_ram_map = { .name = "RAM", - .phys = (unsigned long)&_ebss, + .phys = (unsigned long)__bss_stop, .size = 0, }; From dc0610518f9f01814783f14ba476b41c6ffb27cb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:46:03 +0200 Subject: [PATCH 0014/1098] m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/sections.h | 2 -- arch/m68k/kernel/setup_no.c | 4 ++-- arch/m68k/kernel/vmlinux-nommu.lds | 2 -- arch/m68k/kernel/vmlinux-std.lds | 2 -- arch/m68k/kernel/vmlinux-sun3.lds | 2 -- arch/m68k/mm/init_mm.c | 2 +- arch/m68k/mm/init_no.c | 2 +- arch/m68k/platform/68328/head-de2.S | 8 ++++---- arch/m68k/platform/68328/head-pilot.S | 10 +++++----- arch/m68k/platform/68328/head-ram.S | 4 ++-- arch/m68k/platform/68328/head-rom.S | 6 +++--- arch/m68k/platform/68360/head-ram.S | 6 +++--- arch/m68k/platform/68360/head-rom.S | 8 ++++---- arch/m68k/platform/coldfire/head.S | 10 +++++----- 14 files changed, 30 insertions(+), 38 deletions(-) diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h index 5277e52715ec..d64967ecfec6 100644 --- a/arch/m68k/include/asm/sections.h +++ b/arch/m68k/include/asm/sections.h @@ -3,6 +3,4 @@ #include -extern char _sbss[], _ebss[]; - #endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 8a624ecf86b8..71fb29938dba 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -219,9 +219,9 @@ void __init setup_arch(char **cmdline_p) #endif pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", - _stext, _etext, _sdata, _edata, _sbss, _ebss); + _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", - _ebss, memory_start, memory_start, memory_end); + __bss_stop, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds index 40e02d9c38b4..06a763f49fd3 100644 --- a/arch/m68k/kernel/vmlinux-nommu.lds +++ b/arch/m68k/kernel/vmlinux-nommu.lds @@ -78,9 +78,7 @@ SECTIONS { __init_end = .; } - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = .; diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 63407c836826..d0993594f558 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -31,9 +31,7 @@ SECTIONS RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _edata = .; /* End of data section */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index ad0f46d64c0b..8080469ee6c1 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -44,9 +44,7 @@ __init_begin = .; . = ALIGN(PAGE_SIZE); __init_end = .; - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = . ; diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index f77f258dce3a..282f9de68966 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -104,7 +104,7 @@ void __init print_memmap(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_stext, _etext), MLK_ROUNDUP(_sdata, _edata), - MLK_ROUNDUP(_sbss, _ebss)); + MLK_ROUNDUP(__bss_start, __bss_stop)); } void __init mem_init(void) diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 345ec0d83e3d..688e3664aea0 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -91,7 +91,7 @@ void __init mem_init(void) totalram_pages = free_all_bootmem(); codek = (_etext - _stext) >> 10; - datak = (_ebss - _sdata) >> 10; + datak = (__bss_stop - _sdata) >> 10; initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S index f632fdcb93e9..537d3245b539 100644 --- a/arch/m68k/platform/68328/head-de2.S +++ b/arch/m68k/platform/68328/head-de2.S @@ -60,8 +60,8 @@ _start: * Move ROM filesystem above bss :-) */ - moveal #_sbss, %a0 /* romfs at the start of bss */ - moveal #_ebss, %a1 /* Set up destination */ + moveal #__bss_start, %a0 /* romfs at the start of bss */ + moveal #__bss_stop, %a1 /* Set up destination */ movel %a0, %a2 /* Copy of bss start */ movel 8(%a0), %d1 /* Get size of ROMFS */ @@ -84,8 +84,8 @@ _start: * Initialize BSS segment to 0 */ - lea _sbss, %a0 - lea _ebss, %a1 + lea __bss_start, %a0 + lea __bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 2: cmpal %a0, %a1 diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S index 2ebfd6420818..45a9dad29e3d 100644 --- a/arch/m68k/platform/68328/head-pilot.S +++ b/arch/m68k/platform/68328/head-pilot.S @@ -110,7 +110,7 @@ L0: movel #CONFIG_VECTORBASE, %d7 addl #16, %d7 moveal %d7, %a0 - moveal #_ebss, %a1 + moveal #__bss_stop, %a1 lea %a1@(512), %a2 DBG_PUTC('C') @@ -138,8 +138,8 @@ LD1: DBG_PUTC('E') - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -150,7 +150,7 @@ L1: DBG_PUTC('F') /* Copy command line from end of bss to command line */ - moveal #_ebss, %a0 + moveal #__bss_stop, %a0 moveal #command_line, %a1 lea %a1@(512), %a2 @@ -165,7 +165,7 @@ L3: movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel %a4, %d0 diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S index 7f1aeeacb219..5189ef926098 100644 --- a/arch/m68k/platform/68328/head-ram.S +++ b/arch/m68k/platform/68328/head-ram.S @@ -76,8 +76,8 @@ pclp3: beq pclp3 #endif /* DEBUG */ moveal #0x007ffff0, %ssp - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 >= %a1 */ L1: diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S index a5ff96d0295f..3dff98ba2e97 100644 --- a/arch/m68k/platform/68328/head-rom.S +++ b/arch/m68k/platform/68328/head-rom.S @@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr cmpal %a1, %a2 bhi 1b - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 1: @@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0 movel %d0, _ramend diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S index 8eb94fb6b971..acd213170d80 100644 --- a/arch/m68k/platform/68360/head-ram.S +++ b/arch/m68k/platform/68360/head-ram.S @@ -219,8 +219,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -234,7 +234,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S index 97510e55b802..dfc756d99886 100644 --- a/arch/m68k/platform/68360/head-rom.S +++ b/arch/m68k/platform/68360/head-rom.S @@ -13,7 +13,7 @@ */ .global _stext -.global _sbss +.global __bss_start .global _start .global _rambase @@ -229,8 +229,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -244,7 +244,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index c3db70ed33b3..7e16562ec1f4 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -230,8 +230,8 @@ _vstart: /* * Move ROM filesystem above bss :-) */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* set up destination */ movel %a0,%a2 /* copy of bss start */ movel 8(%a0),%d0 /* get size of ROMFS */ @@ -249,7 +249,7 @@ _copy_romfs: bne _copy_romfs #else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 + lea __bss_stop,%a1 movel %a1,_ramstart #endif /* CONFIG_ROMFS_FS */ @@ -257,8 +257,8 @@ _copy_romfs: /* * Zero out the bss region. */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* get end of bss */ clrl %d0 /* set value */ _clear_bss: movel %d0,(%a0)+ /* clear each word */ From e653614b28d77caa7e4405d2f259aac668f81b80 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:49:48 +0200 Subject: [PATCH 0015/1098] m68k: Use asm-generic version of Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/sections.h | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) delete mode 100644 arch/m68k/include/asm/sections.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 064f86743b34..a74e5d95c384 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -20,6 +20,7 @@ generic-y += mutex.h generic-y += percpu.h generic-y += resource.h generic-y += scatterlist.h +generic-y += sections.h generic-y += siginfo.h generic-y += statfs.h generic-y += topology.h diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h deleted file mode 100644 index d64967ecfec6..000000000000 --- a/arch/m68k/include/asm/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include - -#endif /* _ASM_M68K_SECTIONS_H */ From d670b479586e457c7c36604cea08ae236fb933ac Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Jun 2012 15:55:10 +0200 Subject: [PATCH 0016/1098] m68k/sun3: Remove unselectable code in prom_init() This was copied from SPARC, but isn't relevant for the supported Sun-3 models. [Geert] Also remove the related extern declarations, and update the comment about prom_init(). Reported-by: Sarah Nadi Signed-off-by: Geert Uytterhoeven --- arch/m68k/sun3/prom/init.c | 48 ++------------------------------------ 1 file changed, 2 insertions(+), 46 deletions(-) diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c index d8e6349336b4..eeba067d565f 100644 --- a/arch/m68k/sun3/prom/init.c +++ b/arch/m68k/sun3/prom/init.c @@ -22,57 +22,13 @@ int prom_root_node; struct linux_nodeops *prom_nodeops; /* You must call prom_init() before you attempt to use any of the - * routines in the prom library. It returns 0 on success, 1 on - * failure. It gets passed the pointer to the PROM vector. + * routines in the prom library. + * It gets passed the pointer to the PROM vector. */ -extern void prom_meminit(void); -extern void prom_ranges_init(void); - void __init prom_init(struct linux_romvec *rp) { romvec = rp; -#ifndef CONFIG_SUN3 - switch(romvec->pv_romvers) { - case 0: - prom_vers = PROM_V0; - break; - case 2: - prom_vers = PROM_V2; - break; - case 3: - prom_vers = PROM_V3; - break; - case 4: - prom_vers = PROM_P1275; - prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n"); - prom_halt(); - break; - default: - prom_printf("PROMLIB: Bad PROM version %d\n", - romvec->pv_romvers); - prom_halt(); - break; - }; - - prom_rev = romvec->pv_plugin_revision; - prom_prev = romvec->pv_printrev; - prom_nodeops = romvec->pv_nodeops; - - prom_root_node = prom_getsibling(0); - if((prom_root_node == 0) || (prom_root_node == -1)) - prom_halt(); - - if((((unsigned long) prom_nodeops) == 0) || - (((unsigned long) prom_nodeops) == -1)) - prom_halt(); - - prom_meminit(); - - prom_ranges_init(); -#endif -// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", -// romvec->pv_romvers, prom_rev); /* Initialization successful. */ return; From a8ab98484a1b3e072e2b4ac720dcb0690ec4edfa Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 22 Jun 2012 12:33:41 +0200 Subject: [PATCH 0017/1098] m68k: Remove never used asm/shm.h m68k's asm/shm.h header has been part of the tree ever since m68k support got added in v1.3.94. (It started as /include/asm-m68k/shm.h and moved to its current location a few years ago.) It seems it was never used: no file ever included it and nothing used the macros it defines. (Actually, from v2.5.46 until v2.6.29-rc3 it was included by m68knommu's asm/shm.h. But that header was just a very thin wrapper for this header and was itself unused too.) This header can safely be removed. Signed-off-by: Paul Bolle Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/shm.h | 31 ------------------------------- 1 file changed, 31 deletions(-) delete mode 100644 arch/m68k/include/asm/shm.h diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h deleted file mode 100644 index fa56ec84a126..000000000000 --- a/arch/m68k/include/asm/shm.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_SHM_H -#define _M68K_SHM_H - - -/* format of page table entries that correspond to shared memory pages - currently out in swap space (see also mm/swap.c): - bits 0-1 (PAGE_PRESENT) is = 0 - bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE - bits 31..9 are used like this: - bits 15..9 (SHM_ID) the id of the shared memory segment - bits 30..16 (SHM_IDX) the index of the page within the shared memory segment - (actually only bits 25..16 get used since SHMMAX is so low) - bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach -*/ -/* on the m68k both bits 0 and 1 must be zero */ -/* format on the sun3 is similar, but bits 30, 31 are set to zero and all - others are reduced by 2. --m */ - -#ifndef CONFIG_SUN3 -#define SHM_ID_SHIFT 9 -#else -#define SHM_ID_SHIFT 7 -#endif -#define _SHM_ID_BITS 7 -#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) - -#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) -#define _SHM_IDX_BITS 15 -#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) - -#endif /* _M68K_SHM_H */ From 2a8ac745e3171889d364235b8203342e28526d2c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 6 Jul 2012 16:08:25 +0200 Subject: [PATCH 0018/1098] x86: CONFIG_CC_STACKPROTECTOR=y is no longer experimental This feature has been around for over 5 years now, and has no CONFIG_EXPERIMENTAL dependency anymore, so remove the '(EXPERIMENTAL)' tag from the help text as well. Signed-off-by: Jean Delvare Acked-by: Arjan van de Ven Link: http://lkml.kernel.org/r/1341583705.4655.18.camel@amber.site Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c70684f859e1..b03fe17042e4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1525,7 +1525,7 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + bool "Enable -fstack-protector buffer overflow detection" ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on From 897f3325a17e17dcdf8f3950a2b83542645902e5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 27 Jun 2012 10:57:38 +0200 Subject: [PATCH 0019/1098] zorro: Remove unused zorro_bus.devices Signed-off-by: Geert Uytterhoeven --- drivers/zorro/zorro.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c index 181fa8158a8b..858c9714b2f3 100644 --- a/drivers/zorro/zorro.c +++ b/drivers/zorro/zorro.c @@ -37,7 +37,6 @@ struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO]; */ struct zorro_bus { - struct list_head devices; /* list of devices on this bus */ struct device dev; }; @@ -136,7 +135,6 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) if (!bus) return -ENOMEM; - INIT_LIST_HEAD(&bus->devices); bus->dev.parent = &pdev->dev; dev_set_name(&bus->dev, "zorro"); error = device_register(&bus->dev); From 72d0d248ca8232dbd30d35b42d0d86e39b3e322b Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Mon, 16 Jul 2012 15:23:48 -0400 Subject: [PATCH 0020/1098] fuse: add FUSE_AUTO_INVAL_DATA init flag FUSE_AUTO_INVAL_DATA is provided to enable updated/auto cache invalidation logic. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/fuse_i.h | 3 +++ fs/fuse/inode.c | 4 +++- include/linux/fuse.h | 7 ++++++- 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 771fb6322c07..e24dd74e3068 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -484,6 +484,9 @@ struct fuse_conn { /** Is fallocate not implemented by fs? */ unsigned no_fallocate:1; + /** Use enhanced/automatic page cache invalidation. */ + unsigned auto_inval_data:1; + /** The number of requests waiting for completion */ atomic_t num_waiting; diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 1cd61652018c..dd37ee291b8b 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -834,6 +834,8 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->big_writes = 1; if (arg->flags & FUSE_DONT_MASK) fc->dont_mask = 1; + if (arg->flags & FUSE_AUTO_INVAL_DATA) + fc->auto_inval_data = 1; } else { ra_pages = fc->max_read / PAGE_CACHE_SIZE; fc->no_lock = 1; @@ -859,7 +861,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE; arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC | FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK | - FUSE_FLOCK_LOCKS; + FUSE_FLOCK_LOCKS | FUSE_AUTO_INVAL_DATA; req->in.h.opcode = FUSE_INIT; req->in.numargs = 1; req->in.args[0].size = sizeof(*arg); diff --git a/include/linux/fuse.h b/include/linux/fuse.h index 9303348965fb..e4a9d2af9aaa 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -57,6 +57,9 @@ * * 7.19 * - add FUSE_FALLOCATE + * + * 7.20 + * - add FUSE_AUTO_INVAL_DATA */ #ifndef _LINUX_FUSE_H @@ -88,7 +91,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 19 +#define FUSE_KERNEL_MINOR_VERSION 20 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -167,6 +170,7 @@ struct fuse_file_lock { * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." * FUSE_DONT_MASK: don't apply umask to file mode on create operations * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks + * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -176,6 +180,7 @@ struct fuse_file_lock { #define FUSE_BIG_WRITES (1 << 5) #define FUSE_DONT_MASK (1 << 6) #define FUSE_FLOCK_LOCKS (1 << 10) +#define FUSE_AUTO_INVAL_DATA (1 << 12) /** * CUSE INIT request/reply flags From eed2179efe1aac145bf6d54b925b750976380fa6 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Mon, 16 Jul 2012 15:23:49 -0400 Subject: [PATCH 0021/1098] fuse: invalidate inode mapping if mtime changes We currently invalidate the inode address space mapping if the file size changes unexpectedly. In the case of a fuse network filesystem, a portion of a file could be overwritten remotely without changing the file size. Compare the old mtime as well to detect this condition and invalidate the mapping if the file has been updated. The original logic (to ignore changes in mtime) is preserved unless the client specifies FUSE_AUTO_INVAL_DATA on init. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index dd37ee291b8b..dd4401650b47 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -197,6 +197,7 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr, struct fuse_conn *fc = get_fuse_conn(inode); struct fuse_inode *fi = get_fuse_inode(inode); loff_t oldsize; + struct timespec old_mtime; spin_lock(&fc->lock); if (attr_version != 0 && fi->attr_version > attr_version) { @@ -204,15 +205,35 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr, return; } + old_mtime = inode->i_mtime; fuse_change_attributes_common(inode, attr, attr_valid); oldsize = inode->i_size; i_size_write(inode, attr->size); spin_unlock(&fc->lock); - if (S_ISREG(inode->i_mode) && oldsize != attr->size) { - truncate_pagecache(inode, oldsize, attr->size); - invalidate_inode_pages2(inode->i_mapping); + if (S_ISREG(inode->i_mode)) { + bool inval = false; + + if (oldsize != attr->size) { + truncate_pagecache(inode, oldsize, attr->size); + inval = true; + } else if (fc->auto_inval_data) { + struct timespec new_mtime = { + .tv_sec = attr->mtime, + .tv_nsec = attr->mtimensec, + }; + + /* + * Auto inval mode also checks and invalidates if mtime + * has changed. + */ + if (!timespec_equal(&old_mtime, &new_mtime)) + inval = true; + } + + if (inval) + invalidate_inode_pages2(inode->i_mapping); } } From a8894274a3581125fb311eabfc97cd0123740c5e Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Mon, 16 Jul 2012 15:23:50 -0400 Subject: [PATCH 0022/1098] fuse: update attributes on aio_read A fuse-based network filesystem might allow for the inode and/or file data to change unexpectedly. A local client that opens and repeatedly reads a file might never pick up on such changes and indefinitely return stale data. Always invoke fuse_update_attributes() in the read path to cause an attr revalidation when the attributes expire. This leads to a page cache invalidation if necessary and ensures fuse issues new read requests to the fuse client. The original logic (reval only on reads beyond EOF) is preserved unless the client specifies FUSE_AUTO_INVAL_DATA on init. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index b321a688cde7..5800101e5ce1 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -703,13 +703,16 @@ static ssize_t fuse_file_aio_read(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { struct inode *inode = iocb->ki_filp->f_mapping->host; + struct fuse_conn *fc = get_fuse_conn(inode); - if (pos + iov_length(iov, nr_segs) > i_size_read(inode)) { + /* + * In auto invalidate mode, always update attributes on read. + * Otherwise, only update if we attempt to read past EOF (to ensure + * i_size is up to date). + */ + if (fc->auto_inval_data || + (pos + iov_length(iov, nr_segs) > i_size_read(inode))) { int err; - /* - * If trying to read past EOF, make sure the i_size - * attribute is up-to-date. - */ err = fuse_update_attributes(inode, NULL, iocb->ki_filp, NULL); if (err) return err; From 69fe05c90ed58aac956dccb9e6d3a325fb3b8767 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 18 Jul 2012 16:09:40 +0200 Subject: [PATCH 0023/1098] fuse: add missing INIT flags Add missing flags that userspace derived from the protocol version number. This makes the protocol more flexible. Signed-off-by: Miklos Szeredi --- fs/fuse/inode.c | 3 ++- include/linux/fuse.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index dd4401650b47..ce0a2838ccd0 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -882,7 +882,8 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE; arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC | FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK | - FUSE_FLOCK_LOCKS | FUSE_AUTO_INVAL_DATA; + FUSE_SPLICE_WRITE | FUSE_SPLICE_MOVE | FUSE_SPLICE_READ | + FUSE_FLOCK_LOCKS | FUSE_IOCTL_DIR | FUSE_AUTO_INVAL_DATA; req->in.h.opcode = FUSE_INIT; req->in.numargs = 1; req->in.args[0].size = sizeof(*arg); diff --git a/include/linux/fuse.h b/include/linux/fuse.h index e4a9d2af9aaa..6455c5b64c2e 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -169,7 +169,11 @@ struct fuse_file_lock { * FUSE_POSIX_LOCKS: remote locking for POSIX file locks * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." * FUSE_DONT_MASK: don't apply umask to file mode on create operations + * FUSE_SPLICE_WRITE: kernel supports splice write on the device + * FUSE_SPLICE_MOVE: kernel supports splice move on the device + * FUSE_SPLICE_READ: kernel supports splice read on the device * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks + * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages */ #define FUSE_ASYNC_READ (1 << 0) @@ -179,7 +183,11 @@ struct fuse_file_lock { #define FUSE_EXPORT_SUPPORT (1 << 4) #define FUSE_BIG_WRITES (1 << 5) #define FUSE_DONT_MASK (1 << 6) +#define FUSE_SPLICE_WRITE (1 << 7) +#define FUSE_SPLICE_MOVE (1 << 8) +#define FUSE_SPLICE_READ (1 << 9) #define FUSE_FLOCK_LOCKS (1 << 10) +#define FUSE_HAS_IOCTL_DIR (1 << 11) #define FUSE_AUTO_INVAL_DATA (1 << 12) /** From f3840dc0fb57aef120c5ee8241cdc9aaf3cec8d4 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 18 Jul 2012 16:09:40 +0200 Subject: [PATCH 0024/1098] fuse: add missing INIT flag descriptions Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/fuse.h b/include/linux/fuse.h index 6455c5b64c2e..d8c713e148e3 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -166,8 +166,12 @@ struct fuse_file_lock { /** * INIT request/reply flags * + * FUSE_ASYNC_READ: asynchronous read requests * FUSE_POSIX_LOCKS: remote locking for POSIX file locks + * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported) + * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." + * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB * FUSE_DONT_MASK: don't apply umask to file mode on create operations * FUSE_SPLICE_WRITE: kernel supports splice write on the device * FUSE_SPLICE_MOVE: kernel supports splice move on the device From 1525e06e4414dbe053ea10cbd8cc03bb150e8e27 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Jul 2012 21:54:29 +0200 Subject: [PATCH 0025/1098] m68k/apollo: Rename "timer" to "apollo_timer" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In file included from include/linux/kgdb.h:17, from include/linux/fb.h:8, from drivers/video/dnfb.c:15: include/linux/serial_8250.h:71: error: expected identifier or ‘(’ before numeric constant include/linux/serial_8250.h:72: error: expected ‘;’ before ‘struct’ make[1]: *** [drivers/video/dnfb.o] Error 1 This is caused by #define timer (IO_BASE + timer_physaddr) in , which conflicts with the new "timer" struct member in . Rename "timer" to "apollo_timer", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven -- http://kisskb.ellerman.id.au/kisskb/buildresult/6739606/ --- arch/m68k/apollo/config.c | 16 ++++++++-------- arch/m68k/include/asm/apollohw.h | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index 0a30406b9442..f5565d6eeb8e 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) timer_handler(irq, dev_id); - x=*(volatile unsigned char *)(timer+3); - x=*(volatile unsigned char *)(timer+5); + x = *(volatile unsigned char *)(apollo_timer + 3); + x = *(volatile unsigned char *)(apollo_timer + 5); return IRQ_HANDLED; } @@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) void dn_sched_init(irq_handler_t timer_routine) { /* program timer 1 */ - *(volatile unsigned char *)(timer+3)=0x01; - *(volatile unsigned char *)(timer+1)=0x40; - *(volatile unsigned char *)(timer+5)=0x09; - *(volatile unsigned char *)(timer+7)=0xc4; + *(volatile unsigned char *)(apollo_timer + 3) = 0x01; + *(volatile unsigned char *)(apollo_timer + 1) = 0x40; + *(volatile unsigned char *)(apollo_timer + 5) = 0x09; + *(volatile unsigned char *)(apollo_timer + 7) = 0xc4; /* enable IRQ of PIC B */ *(volatile unsigned char *)(pica+1)&=(~8); #if 0 - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); #endif if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h index a1373b9aa281..635ef4f89010 100644 --- a/arch/m68k/include/asm/apollohw.h +++ b/arch/m68k/include/asm/apollohw.h @@ -98,7 +98,7 @@ extern u_long timer_physaddr; #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) #define pica (IO_BASE + pica_physaddr) #define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) +#define apollo_timer (IO_BASE + timer_physaddr) #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) #define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) From ddb24bbac3681b87ae0638aacb702d9273e3c025 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 09:18:14 +0530 Subject: [PATCH 0026/1098] logfs: create a pagecache page if it is not present While writing the partial journal entries we assumed that the page associated with the journal would always in locatable. This incorrect assumption resulted in the following BUG kernel BUG at /home/benixon/WD_SMR/kernels/linux-3.3.7-logfs/fs/logfs/journal.c:569! EIP is at logfs_write_area+0xb6/0x109 [logfs] EAX: 00000000 EBX: 00000000 ECX: ef6efea4 EDX: 00000000 ESI: 001b9000 EDI: f009e000 EBP: c3c13f14 ESP: c3c13ef0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process sync (pid: 1799, ti=c3c12000 task=f07825b0 task.ti=c3c12000) Stack: 01001000 c3c13f26 781b9000 00000000 f009e000 f7286000 f1f83400 f8445071 f1f83400 c3c13f30 f8445ae9 c3c13f20 0000100a 000ee000 f009e000 00000001 c3c13f5c f8445d17 c05eb0ee 00000000 f1f83400 ef718000 f009e25c ea9c3d80 Call Trace: [] ? account_shadow+0x16d/0x16d [logfs] [] logfs_write_je+0x2a/0x44 [logfs] [] logfs_write_anchor+0x114/0x228 [logfs] [] ? empty+0x5/0x5 [] logfs_sync_fs+0x1e/0x31 [logfs] [] __sync_filesystem+0x5d/0x6f [] sync_one_sb+0x15/0x17 [] iterate_supers+0x59/0x9a [] ? __sync_filesystem+0x6f/0x6f [] sys_sync+0x29/0x4f [] sysenter_do_call+0x12/0x28 EIP: [] logfs_write_area+0xb6/0x109 [logfs] SS:ESP 0068:c3c13ef0 ---[ end trace ef6e9ef52601a945 ]--- The fix is to create the pagecache page if it is not locatable. Reported-and-tested-by: Benixon Dhas Signed-off-by: Prasad Joshi --- fs/logfs/journal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c index 1e1c369df22b..2a09b8d73989 100644 --- a/fs/logfs/journal.c +++ b/fs/logfs/journal.c @@ -565,7 +565,7 @@ static void write_wbuf(struct super_block *sb, struct logfs_area *area, index = ofs >> PAGE_SHIFT; page_ofs = ofs & (PAGE_SIZE - 1); - page = find_lock_page(mapping, index); + page = find_or_create_page(mapping, index, GFP_NOFS); BUG_ON(!page); memcpy(wbuf, page_address(page) + page_ofs, super->s_writesize); unlock_page(page); From 41b93bc1ee7e7276db698dd66afa7b740cda517a Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 09:35:52 +0530 Subject: [PATCH 0027/1098] logfs: maintain the ordering of meta-inode destruction LogFS does not use a specialized area to maintain the inodes. The inodes information is kept in a specialized file called inode file. Similarly, the segment information is kept in a segment file. Since the segment file also has an inode which is kept in the inode file, the inode for segment file must be evicted before the inode for inode file. The change fixes the following BUG during unmount Pid: 2057, comm: umount Not tainted 3.5.0-rc6+ #25 Bochs Bochs RIP: 0010:[] [] move_page_to_btree+0x32/0x1f0 [logfs] Process umount (pid: 2057, threadinfo ...) Call Trace: [] ? find_get_pages+0x2a/0x180 [] logfs_invalidatepage+0x85/0x90 [logfs] [] truncate_inode_page+0xb1/0xd0 [] truncate_inode_pages_range+0x15f/0x490 [] ? printk+0x78/0x7a [] truncate_inode_pages+0x15/0x20 [] logfs_evict_inode+0x6c/0x190 [logfs] [] ? _raw_spin_unlock+0x2b/0x40 [] evict+0xa7/0x1b0 [] dispose_list+0x3e/0x60 [] evict_inodes+0xf4/0x110 [] generic_shutdown_super+0x53/0xf0 [] logfs_kill_sb+0x52/0xf0 [logfs] [] deactivate_locked_super+0x45/0x80 [] deactivate_super+0x4a/0x70 [] mntput_no_expire+0xde/0x140 [] sys_umount+0x6f/0x3a0 [] system_call_fastpath+0x16/0x1b ---[ end trace 45f7752082cefafd ]--- Signed-off-by: Prasad Joshi --- fs/logfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index df093d9e4da1..6984562738d3 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -389,8 +389,8 @@ static void logfs_put_super(struct super_block *sb) { struct logfs_super *super = logfs_super(sb); /* kill the meta-inodes */ - iput(super->s_master_inode); iput(super->s_segfile_inode); + iput(super->s_master_inode); iput(super->s_mapping_inode); } From 9f0bbd8ca7905fcc0602c038013b095322fec939 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Mon, 23 Jul 2012 10:32:11 +0530 Subject: [PATCH 0028/1098] logfs: query block device for number of pages to send with bio The block device driver puts a limit on maximum number of pages that can be sent with the bio. Not all block devices can handle BIO_MAX_PAGES number of pages in bio. Specifically the virtio-blk diriver limits it to 126. When the LogFS file system was excersized in KVM, the following bug from do_virtblk_request() was observed static void do_virtblk_request(struct request_queue *q) { .... .... while ((req = blk_peek_request(q)) != NULL) { BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems); .... .... } .... } The patch fixes the problem by querring the maximum number of pages in bio allowed from block device driver and then using those many pages during submit_bio. Signed-off-by: Prasad Joshi --- fs/logfs/dev_bdev.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index ea29df36893d..e784a217b500 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -96,12 +96,11 @@ static int __bdev_writeseg(struct super_block *sb, u64 ofs, pgoff_t index, struct address_space *mapping = super->s_mapping_inode->i_mapping; struct bio *bio; struct page *page; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); @@ -191,12 +190,11 @@ static int do_erase(struct super_block *sb, u64 ofs, pgoff_t index, { struct logfs_super *super = logfs_super(sb); struct bio *bio; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); From b8edf3e5522735c8ce78b81845f7a1a2d4a08626 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 22 Jun 2012 17:21:17 +0100 Subject: [PATCH 0029/1098] ASoC: wm8994: Ensure there are enough BCLKs for four channels Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index bb62f4b3d563..235577a3d0e7 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2649,7 +2649,7 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - bclk_rate = params_rate(params) * 2; + bclk_rate = params_rate(params) * 4; switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: bclk_rate *= 16; From b6070a8d9853eda010a549fa9a09eb8d7269b929 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 20 Jul 2012 11:53:29 -0700 Subject: [PATCH 0030/1098] futex: Test for pi_mutex on fault in futex_wait_requeue_pi() If fixup_pi_state_owner() faults, pi_mutex may be NULL. Test for pi_mutex != NULL before testing the owner against current and possibly unlocking it. Signed-off-by: Darren Hart Cc: Dave Jones Cc: Dan Carpenter Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/dc59890338fc413606f04e5c5b131530734dae3d.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner --- kernel/futex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index e2b0fb9a0b3b..05018bfe21a7 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2370,7 +2370,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags, * fault, unlock the rt_mutex and return the fault to userspace. */ if (ret == -EFAULT) { - if (rt_mutex_owner(pi_mutex) == current) + if (pi_mutex && rt_mutex_owner(pi_mutex) == current) rt_mutex_unlock(pi_mutex); } else if (ret == -EINTR) { /* From f27071cb7fe3e1d37a9dbe6c0dfc5395cd40fa43 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 20 Jul 2012 11:53:30 -0700 Subject: [PATCH 0031/1098] futex: Fix bug in WARN_ON for NULL q.pi_state The WARN_ON in futex_wait_requeue_pi() for a NULL q.pi_state was testing the address (&q.pi_state) of the pointer instead of the value (q.pi_state) of the pointer. Correct it accordingly. Signed-off-by: Darren Hart Cc: Dave Jones Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1c85d97f6e5f79ec389a4ead3e367363c74bd09a.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner --- kernel/futex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index 05018bfe21a7..5551adaf7cdf 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2343,7 +2343,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags, * signal. futex_unlock_pi() will not destroy the lock_ptr nor * the pi_state. */ - WARN_ON(!&q.pi_state); + WARN_ON(!q.pi_state); pi_mutex = &q.pi_state->pi_mutex; ret = rt_mutex_finish_proxy_lock(pi_mutex, to, &rt_waiter, 1); debug_rt_mutex_free_waiter(&rt_waiter); From 6f7b0a2a5c0fb03be7c25bd1745baa50582348ef Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 20 Jul 2012 11:53:31 -0700 Subject: [PATCH 0032/1098] futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi() If uaddr == uaddr2, then we have broken the rule of only requeueing from a non-pi futex to a pi futex with this call. If we attempt this, as the trinity test suite manages to do, we miss early wakeups as q.key is equal to key2 (because they are the same uaddr). We will then attempt to dereference the pi_mutex (which would exist had the futex_q been properly requeued to a pi futex) and trigger a NULL pointer dereference. Signed-off-by: Darren Hart Cc: Dave Jones Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/ad82bfe7f7d130247fbe2b5b4275654807774227.1342809673.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner --- kernel/futex.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 5551adaf7cdf..3717e7b306e0 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2231,11 +2231,11 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, * @uaddr2: the pi futex we will take prior to returning to user-space * * The caller will wait on uaddr and will be requeued by futex_requeue() to - * uaddr2 which must be PI aware. Normal wakeup will wake on uaddr2 and - * complete the acquisition of the rt_mutex prior to returning to userspace. - * This ensures the rt_mutex maintains an owner when it has waiters; without - * one, the pi logic wouldn't know which task to boost/deboost, if there was a - * need to. + * uaddr2 which must be PI aware and unique from uaddr. Normal wakeup will wake + * on uaddr2 and complete the acquisition of the rt_mutex prior to returning to + * userspace. This ensures the rt_mutex maintains an owner when it has waiters; + * without one, the pi logic would not know which task to boost/deboost, if + * there was a need to. * * We call schedule in futex_wait_queue_me() when we enqueue and return there * via the following: @@ -2272,6 +2272,9 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags, struct futex_q q = futex_q_init; int res, ret; + if (uaddr == uaddr2) + return -EINVAL; + if (!bitset) return -EINVAL; From b44d50dcacea0d485ca2ff9140f8cc28ee22f28d Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 23 Jul 2012 16:22:37 -0400 Subject: [PATCH 0033/1098] time: Fix casting issue in tk_set_xtime and tk_xtime_add commit 1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) introduced helper functions which apply a timespec to the core internal timekeeper data. The internal storage type is u64. The timespec tv_nsec value must be shifted before set or added to the internal value. tv_nsec is a long, which is 32bit on a 32bit system, so without casting tv_nsec to u64 we lose the bits which are shifted over the 32bit boundary. Add the proper typecasts. Reported-by: Konrad Rzeszutek Wilk Tested-by: Konrad Rzeszutek Wilk Signed-off-by: John Stultz Acked-by: Prarit Bhargava Link: http://lkml.kernel.org/r/1343074957-16541-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 5980e902978c..8f2aba1246f2 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -108,13 +108,13 @@ static struct timespec tk_xtime(struct timekeeper *tk) static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts) { tk->xtime_sec = ts->tv_sec; - tk->xtime_nsec = ts->tv_nsec << tk->shift; + tk->xtime_nsec = (u64)ts->tv_nsec << tk->shift; } static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts) { tk->xtime_sec += ts->tv_sec; - tk->xtime_nsec += ts->tv_nsec << tk->shift; + tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift; } /** From 3aa569c3fedbd0d16041d08bf6e89b8c43aee650 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 12:42:58 +0200 Subject: [PATCH 0034/1098] mac80211: fix scan_sdata assignment We need to use RCU to assign scan_sdata. Signed-off-by: Johannes Berg --- net/mac80211/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 169da0742c81..7644181cb6b4 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -304,7 +304,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted, if (local->scan_req != local->int_scan_req) cfg80211_scan_done(local->scan_req, aborted); local->scan_req = NULL; - local->scan_sdata = NULL; + rcu_assign_pointer(local->scan_sdata, NULL); local->scanning = 0; local->scan_channel = NULL; From c2e1d9073fc98f471067c0257a31b4818306ebe1 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 20 Jul 2012 17:20:24 +0800 Subject: [PATCH 0035/1098] ASoC: mxs-saif: fix clock prepare and enable unbalance issue Currently we directly call a clock_enable in trigger function without a clk_prepare as pair first. This will cause system hang immediately when run capture because the clock was not prepared(playback does not hang because the clock was prepared already by get_mclk before), a warning message in clock framework may cause a deadlock to reclaim clock lock (see: pl011_console_write). Here we prepare clock first in hw_param, then enable it in trigger function to guarantee the balance. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index aba71bfa33b1..fdbb36aa9cf5 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -394,9 +394,14 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai) { struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); + struct mxs_saif *master_saif; u32 scr, stat; int ret; + master_saif = mxs_saif_get_master(saif); + if (!master_saif) + return -EINVAL; + /* mclk should already be set */ if (!saif->mclk && saif->mclk_in_use) { dev_err(cpu_dai->dev, "set mclk first\n"); @@ -420,6 +425,11 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream, return ret; } + /* prepare clk in hw_param, enable in trigger */ + clk_prepare(saif->clk); + if (saif != master_saif) + clk_prepare(master_saif->clk); + scr = __raw_readl(saif->base + SAIF_CTRL); scr &= ~BM_SAIF_CTRL_WORD_LENGTH; From d0ba4c014934cb56f1eabb481ff8026b6d49d33c Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 20 Jul 2012 17:20:25 +0800 Subject: [PATCH 0036/1098] ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work Set an initial clock rate for the saif internal logic to work properly. This is important when working in EXTMASTER mode that uses the other saif's BITCLK&LRCLK but it still needs a basic clock which should be fast enough for the internal logic. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index fdbb36aa9cf5..b3030718c228 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -427,8 +427,22 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream, /* prepare clk in hw_param, enable in trigger */ clk_prepare(saif->clk); - if (saif != master_saif) + if (saif != master_saif) { + /* + * Set an initial clock rate for the saif internal logic to work + * properly. This is important when working in EXTMASTER mode + * that uses the other saif's BITCLK&LRCLK but it still needs a + * basic clock which should be fast enough for the internal + * logic. + */ + clk_enable(saif->clk); + ret = clk_set_rate(saif->clk, 24000000); + clk_disable(saif->clk); + if (ret) + return ret; + clk_prepare(master_saif->clk); + } scr = __raw_readl(saif->base + SAIF_CTRL); From a07e8d49e8b48d3dc458e234a15e36f379a36dff Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 20 Jul 2012 17:20:26 +0800 Subject: [PATCH 0037/1098] ASoC: sgtl5000: remove unneeded snd_soc_dapm_new_widgets in probe There's a driver bug that sgtl5000 dapm widget kcontrols do not work. e.g. can not select capture mux with amixer tool(no error info prompted). The root cause is that we still call snd_soc_dapm_new_widgets in codec driver probe function afer converting to table based widgets. This will cause the card dapm widgets are instantiated before the dapm_routes are registered. Then, no available dapm widget pathes can be found during instantiation which finally will cause soc_dapm_mux_update_power to fail(can not find correct path with kcontrol) in snd_soc_dapm_put_enum_double function. Here we remove the unneeded snd_soc_dapm_new_widgets in codec probe and let the soc core to handle the register sequence properly. Then we can fix above issue. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 8af6a5245b18..5c54b6f4623a 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1357,8 +1357,6 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) if (ret) goto err; - snd_soc_dapm_new_widgets(&codec->dapm); - return 0; err: From b8176627b84adfea3a729265a5a0f02c850e9275 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 Jul 2012 15:48:57 +0100 Subject: [PATCH 0038/1098] ASoC: wm8994: Hold runtime PM reference while handling mic and jack IRQs Ensures that we don't interact badly with the power management framework, especially in the cases where we're doing deferred work or we're using a direct GPIO for these signals. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 235577a3d0e7..04ef03175c51 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3253,10 +3253,13 @@ static void wm8994_mic_work(struct work_struct *work) int ret; int report; + pm_runtime_get_sync(dev); + ret = regmap_read(regmap, WM8994_INTERRUPT_RAW_STATUS_2, ®); if (ret < 0) { dev_err(dev, "Failed to read microphone status: %d\n", ret); + pm_runtime_put(dev); return; } @@ -3299,6 +3302,8 @@ static void wm8994_mic_work(struct work_struct *work) snd_soc_jack_report(priv->micdet[1].jack, report, SND_JACK_HEADSET | SND_JACK_BTN_0); + + pm_runtime_put(dev); } static irqreturn_t wm8994_mic_irq(int irq, void *data) @@ -3421,12 +3426,15 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data) int reg; bool present; + pm_runtime_get_sync(codec->dev); + mutex_lock(&wm8994->accdet_lock); reg = snd_soc_read(codec, WM1811_JACKDET_CTRL); if (reg < 0) { dev_err(codec->dev, "Failed to read jack status: %d\n", reg); mutex_unlock(&wm8994->accdet_lock); + pm_runtime_put(codec->dev); return IRQ_NONE; } @@ -3491,6 +3499,7 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data) SND_JACK_MECHANICAL | SND_JACK_HEADSET | wm8994->btn_mask); + pm_runtime_put(codec->dev); return IRQ_HANDLED; } @@ -3602,6 +3611,8 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) if (!(snd_soc_read(codec, WM8958_MIC_DETECT_1) & WM8958_MICD_ENA)) return IRQ_HANDLED; + pm_runtime_get_sync(codec->dev); + /* We may occasionally read a detection without an impedence * range being provided - if that happens loop again. */ @@ -3612,6 +3623,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_err(codec->dev, "Failed to read mic detect status: %d\n", reg); + pm_runtime_put(codec->dev); return IRQ_NONE; } @@ -3639,6 +3651,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_warn(codec->dev, "Accessory detection with no callback\n"); out: + pm_runtime_put(codec->dev); return IRQ_HANDLED; } From bba3d8c3b3c0f2123be5bc687d1cddc13437c923 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 23 Jul 2012 12:16:19 +0100 Subject: [PATCH 0039/1098] [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occured during a parisc build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Reported-by: Fengguang Wu Signed-off-by: Mel Gorman Cc: Signed-off-by: James Bottomley --- arch/parisc/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 6c6defc24619..af9cf30ed474 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC_INIT(i) { (i) } #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() @@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) +#define ATOMIC64_INIT(i) { (i) } static __inline__ s64 __atomic64_add_return(s64 i, atomic64_t *v) From dc9b229a58dc0dfed34272ff26c6d5fd17c674e0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 13 Jul 2012 19:29:45 +0200 Subject: [PATCH 0040/1098] genirq: Allow irq chips to mark themself oneshot safe Some interrupt chips like MSI are oneshot safe by implementation. For those interrupts we can avoid the mask/unmask sequence for threaded interrupt handlers. Signed-off-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1207132056540.32033@ionos Cc: Linus Torvalds Cc: Avi Kivity Cc: Marcelo Tosatti Cc: Jan Kiszka --- include/linux/irq.h | 1 + kernel/irq/manage.c | 15 ++++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/include/linux/irq.h b/include/linux/irq.h index 553fb66da130..216b0ba109d7 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -349,6 +349,7 @@ enum { IRQCHIP_MASK_ON_SUSPEND = (1 << 2), IRQCHIP_ONOFFLINE_ENABLED = (1 << 3), IRQCHIP_SKIP_SET_WAKE = (1 << 4), + IRQCHIP_ONESHOT_SAFE = (1 << 5), }; /* This include will go away once we isolated irq_desc usage to core code */ diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 8c548232ba39..2e326d1ebec1 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -959,6 +959,18 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) goto out_thread; } + /* + * Drivers are often written to work w/o knowledge about the + * underlying irq chip implementation, so a request for a + * threaded irq without a primary hard irq context handler + * requires the ONESHOT flag to be set. Some irq chips like + * MSI based interrupts are per se one shot safe. Check the + * chip flags, so we can avoid the unmask dance at the end of + * the threaded handler for those. + */ + if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE) + new->flags &= ~IRQF_ONESHOT; + /* * The following block of code has to be executed atomically */ @@ -1033,7 +1045,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) */ new->thread_mask = 1 << ffz(thread_mask); - } else if (new->handler == irq_default_primary_handler) { + } else if (new->handler == irq_default_primary_handler && + !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) { /* * The interrupt was requested with handler = NULL, so * we use the default primary handler for it. But it From 5e31fc0815a4e2c72b1b495fe7a0d8f9bfb9e4b4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 24 Jul 2012 08:35:39 +0200 Subject: [PATCH 0041/1098] wireless: reg: restore previous behaviour of chan->max_power calculations commit eccc068e8e84c8fe997115629925e0422a98e4de Author: Hong Wu Date: Wed Jan 11 20:33:39 2012 +0200 wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit pow changed the way we calculate chan->max_power as min(chan->max_power, chan->max_reg_power). That broke rt2x00 (and perhaps some other drivers) that do not set chan->max_power. It is not so easy to fix this problem correctly in rt2x00. According to commit eccc068e8 changelog, change claim only to save maximum regulatory power - changing setting of chan->max_power was side effect. This patch restore previous calculations of chan->max_power and do not touch chan->max_reg_power. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Stanislaw Gruszka Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index baf5704740ee..460af03d8149 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -891,7 +891,21 @@ static void handle_channel(struct wiphy *wiphy, chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); - chan->max_power = min(chan->max_power, chan->max_reg_power); + if (chan->orig_mpwr) { + /* + * Devices that have their own custom regulatory domain + * but also use WIPHY_FLAG_STRICT_REGULATORY will follow the + * passed country IE power settings. + */ + if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY && + wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) + chan->max_power = chan->max_reg_power; + else + chan->max_power = min(chan->orig_mpwr, + chan->max_reg_power); + } else + chan->max_power = chan->max_reg_power; } static void handle_band(struct wiphy *wiphy, From d6250a3f12edb3a86db9598ffeca3de8b4a219e9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 25 Jul 2012 16:28:19 +0100 Subject: [PATCH 0042/1098] x86, nops: Missing break resulting in incorrect selection on Intel The Intel case falls through into the generic case which then changes the values. For cases like the P6 it doesn't do the right thing so this seems to be a screwup. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.org Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 1f84794f0759..73ef56c5a8b3 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -219,7 +219,7 @@ void __init arch_init_ideal_nops(void) ideal_nops = intel_nops; #endif } - + break; default: #ifdef CONFIG_X86_64 ideal_nops = k8_nops; From af447bd358acd92a8e96b61a3bf7a55c61a642f4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 25 Jul 2012 13:49:18 +0100 Subject: [PATCH 0043/1098] vlv: it might be wise if we initialised the flag value... Otherwise our initial behaviour is "randomly save a bogus PLL choice" as far as I can see. Signed-off-by: Alan Cox Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e9e476eca89f..3d969ab2ae3f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -869,6 +869,7 @@ intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, unsigned long bestppm, ppm, absppm; int dotclk, flag; + flag = 0; dotclk = target * 1000; bestppm = 1000000; ppm = absppm = 0; From 0274df3e43be962eee0499ee97c514fdb1c8f3ae Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 25 Jul 2012 13:51:04 +0100 Subject: [PATCH 0044/1098] i915: fix error path leak in intel_sdvo_write_cmd Signed-off-by: Alan Cox Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 26a6a4d0d078..d172e9873131 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -444,13 +444,16 @@ static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, struct i2c_msg *msgs; int i, ret = true; + /* Would be simpler to allocate both in one go ? */ buf = (u8 *)kzalloc(args_len * 2 + 2, GFP_KERNEL); if (!buf) return false; msgs = kcalloc(args_len + 3, sizeof(*msgs), GFP_KERNEL); - if (!msgs) + if (!msgs) { + kfree(buf); return false; + } intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); From 9978cf50426bc8d386a0753f74ab895e4d6da554 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 25 Jul 2012 13:51:20 +0100 Subject: [PATCH 0045/1098] i915: Remove silly test drv_priv->gmbus is an array. Comparing it with NULL is somewhat less useful than a chocolate teapot. Possibly we should be testing bus != NULL each iteration of the loop instead ? gcc could help by warning too! Signed-off-by: Alan Cox Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 1991a4408cf9..d79500bc1ce5 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -540,9 +540,6 @@ void intel_teardown_gmbus(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; int i; - if (dev_priv->gmbus == NULL) - return; - for (i = 0; i < GMBUS_NUM_PORTS; i++) { struct intel_gmbus *bus = &dev_priv->gmbus[i]; i2c_del_adapter(&bus->adapter); From aea218f3cbbcaac249b6b2c98930a00d6d931f1e Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 26 Jul 2012 10:00:45 +0300 Subject: [PATCH 0046/1098] KVM: PIC: call ack notifiers for irqs that are dropped form irr After commit 242ec97c358256 PIT interrupts are no longer delivered after PIC reset. It happens because PIT injects interrupt only if previous one was acked, but since on PIC reset it is dropped from irr it will never be delivered and hence acknowledged. Fix that by calling ack notifier on PIC reset. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/i8259.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index 1df8fb9e1d5d..e498b18f010c 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -316,6 +316,11 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) addr &= 1; if (addr == 0) { if (val & 0x10) { + u8 edge_irr = s->irr & ~s->elcr; + int i; + bool found; + struct kvm_vcpu *vcpu; + s->init4 = val & 1; s->last_irr = 0; s->irr &= s->elcr; @@ -333,6 +338,18 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x08) pr_pic_unimpl( "level sensitive irq not supported"); + + kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm) + if (kvm_apic_accept_pic_intr(vcpu)) { + found = true; + break; + } + + + if (found) + for (irq = 0; irq < PIC_NUM_PINS/2; irq++) + if (edge_irr & (1 << irq)) + pic_clear_isr(s, irq); } else if (val & 0x08) { if (val & 0x04) s->poll = 1; From 6956dc568f34107f1d02b24f87efe7250803fc87 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Fri, 20 Jul 2012 14:19:50 +0800 Subject: [PATCH 0047/1098] sched/numa: Add SD_PERFER_SIBLING to CPU domain Commit 8e7fbcbc22c ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs") removed SD_PERFER_SIBLING from the CPU domain. On NUMA machines this causes that load_balance() doesn't perfer LCPU in same physical CPU package. It causes some actual performance regressions on our NUMA machines from Core2 to NHM and SNB. Adding this domain flag again recovers the performance drop. This change doesn't have any bad impact on any of my benchmarks: specjbb, kbuild, fio, hackbench .. etc, on all my machines. Signed-off-by: Alex Shi Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1342765190-21540-1-git-send-email-alex.shi@intel.com Signed-off-by: Ingo Molnar --- include/linux/topology.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/topology.h b/include/linux/topology.h index e91cd43394df..fec12d667211 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -164,6 +164,7 @@ int arch_update_cpu_topology(void); | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ + | 1*SD_PREFER_SIBLING \ , \ .last_balance = jiffies, \ .balance_interval = 1, \ From 45afb1734fa6323a8ba08bd6c392ee227df67dde Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 7 Jul 2012 16:49:02 +0900 Subject: [PATCH 0048/1098] sched: Use task_rq_unlock() in __sched_setscheduler() It seems there's no specific reason to open-code it. I guess commit 0122ec5b02f76 ("sched: Add p->pi_lock to task_rq_lock()") simply missed it. Let's be consistent with others. Signed-off-by: Namhyung Kim Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1341647342-6742-1-git-send-email-namhyung@kernel.org Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5d011ef4c0df..2cb4e7777998 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -4340,9 +4340,7 @@ recheck: */ if (unlikely(policy == p->policy && (!rt_policy(policy) || param->sched_priority == p->rt_priority))) { - - __task_rq_unlock(rq); - raw_spin_unlock_irqrestore(&p->pi_lock, flags); + task_rq_unlock(rq, p, &flags); return 0; } From 014acbf0d5c8445e0ff88ae60edd676dd9cc461c Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Thu, 12 Jul 2012 15:03:42 +0800 Subject: [PATCH 0049/1098] sched: Fix minor code style issues Delete redudant spaces between type name and data name or operators. Signed-off-by: Ying Xue Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1342076622-6606-1-git-send-email-ying.xue0@gmail.com Signed-off-by: Ingo Molnar --- kernel/sched/cpupri.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/sched/cpupri.c b/kernel/sched/cpupri.c index d72586fdf660..23aa789c53ee 100644 --- a/kernel/sched/cpupri.c +++ b/kernel/sched/cpupri.c @@ -65,8 +65,8 @@ static int convert_prio(int prio) int cpupri_find(struct cpupri *cp, struct task_struct *p, struct cpumask *lowest_mask) { - int idx = 0; - int task_pri = convert_prio(p->prio); + int idx = 0; + int task_pri = convert_prio(p->prio); if (task_pri >= MAX_RT_PRIO) return 0; @@ -137,9 +137,9 @@ int cpupri_find(struct cpupri *cp, struct task_struct *p, */ void cpupri_set(struct cpupri *cp, int cpu, int newpri) { - int *currpri = &cp->cpu_to_pri[cpu]; - int oldpri = *currpri; - int do_mb = 0; + int *currpri = &cp->cpu_to_pri[cpu]; + int oldpri = *currpri; + int do_mb = 0; newpri = convert_prio(newpri); From a7e4786b937a3ae918a7520cfdba557a80915fa7 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Sat, 21 Jul 2012 00:54:59 +0530 Subject: [PATCH 0050/1098] sched: Fix comment about PREEMPT_ACTIVE bit location PREEMPT_ACTIVE flag is bit 27, not 28. Fix the comment. Signed-off-by: Srivatsa S. Bhat Cc: paulmck@linux.vnet.ibm.com Cc: josh@joshtriplett.org Cc: rostedt@goodmis.org Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120720192459.6149.14821.stgit@srivatsabhat.in.ibm.com Signed-off-by: Ingo Molnar --- include/linux/hardirq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index bb7f30971858..305f23cd7cff 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -22,7 +22,7 @@ * * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024) * - bit 26 is the NMI_MASK - * - bit 28 is the PREEMPT_ACTIVE flag + * - bit 27 is the PREEMPT_ACTIVE flag * * PREEMPT_MASK: 0x000000ff * SOFTIRQ_MASK: 0x0000ff00 From aa50fe55ace7451e6ad6812915db367c8cfd3bb3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 26 Jul 2012 11:28:38 +0100 Subject: [PATCH 0051/1098] ASoC: ux500: Include the correct header files Thought to be another merge error, board-mop500-msp.h has never existed in the upstream kernel, only msp.h. This patch changes the include files to match the existing file name. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- sound/soc/ux500/ux500_msp_dai.c | 2 +- sound/soc/ux500/ux500_msp_i2s.c | 2 +- sound/soc/ux500/ux500_msp_i2s.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index 62ac0285bfaf..057e28ef770e 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index ee14d2dac2f5..5c472f335a64 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h index 7f71b4a0d4bc..2d9136da9865 100644 --- a/sound/soc/ux500/ux500_msp_i2s.h +++ b/sound/soc/ux500/ux500_msp_i2s.h @@ -17,7 +17,7 @@ #include -#include +#include #define MSP_INPUT_FREQ_APB 48000000 From 1d44b30f35a9873a65b320dd5300088fa995fd94 Mon Sep 17 00:00:00 2001 From: Tomoki Sekiyama Date: Thu, 26 Jul 2012 19:47:32 +0900 Subject: [PATCH 0052/1098] x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs In the current kernel, percpu variable `vector_irq' is not always cleared when a CPU is offlined. If the CPU that has the disabled irqs in vector_irq is hotplugged again, __setup_vector_irq() hits invalid irq vector and may crash. This bug can be reproduced as following; # echo 0 > /sys/devices/system/cpu/cpu7/online # modprobe -r some_driver_using_interrupts # vector_irq@cpu7 uncleared # echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash To fix this problem, this patch clears vector_irq in __fixup_irqs() when the CPU is offlined. This also reverts commit f6175f5bfb4c, which partially fixes this bug by clearing vector in __clear_irq_vector(). But in environments with IOMMU IRQ remapper, it could fail because cfg->domain doesn't contain offlined CPUs. With this patch, the fix in __clear_irq_vector() can be reverted because every vector_irq is already cleared in __fixup_irqs() on offlined CPUs. Signed-off-by: Tomoki Sekiyama Acked-by: Suresh Siddha Cc: yrl.pp-manager.tt@hitachi.com Cc: Yinghai Lu Cc: Alexander Gordeev Link: http://lkml.kernel.org/r/20120726104732.2889.19144.stgit@kvmdev Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 4 ++-- arch/x86/kernel/irq.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 406eee784684..a6c64aaddf9a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1204,7 +1204,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) BUG_ON(!cfg->vector); vector = cfg->vector; - for_each_cpu(cpu, cfg->domain) + for_each_cpu_and(cpu, cfg->domain, cpu_online_mask) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; @@ -1212,7 +1212,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) if (likely(!cfg->move_in_progress)) return; - for_each_cpu(cpu, cfg->old_domain) { + for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) { for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { if (per_cpu(vector_irq, cpu)[vector] != irq) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1f5f1d5d2a02..7ad683d78645 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -328,6 +328,7 @@ void fixup_irqs(void) chip->irq_retrigger(data); raw_spin_unlock(&desc->lock); } + __this_cpu_write(vector_irq[vector], -1); } } #endif From 736edce5f395b8309a61aa62c36c4356abc83219 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 19 Jul 2012 11:21:53 -0700 Subject: [PATCH 0053/1098] x86/mce: Move MCACOD defines from mce-severity.c to We will need some of these values in mce.c. Move them to the appropriate header file so they are available. Acked-by: Borislav Petkov Signed-off-by: Tony Luck Cc: Chen Gong Cc: Huang Ying Cc: Hidetoshi Seto Link: http://lkml.kernel.org/r/0ccfb1af5fe35e537b7cd8e4d448bf7d851dbfb9.1343078495.git.tony.luck@intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mce.h | 8 ++++++++ arch/x86/kernel/cpu/mcheck/mce-severity.c | 7 ------- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 441520e4174f..a3ac52b29cbf 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -33,6 +33,14 @@ #define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */ #define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */ #define MCI_STATUS_AR (1ULL<<55) /* Action required */ +#define MCACOD 0xffff /* MCA Error Code */ + +/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ +#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ +#define MCACOD_SCRUBMSK 0xfff0 +#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ +#define MCACOD_DATA 0x0134 /* Data Load */ +#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ /* MCi_MISC register defines */ #define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f) diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c index 413c2ced887c..13017626f9a8 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-severity.c +++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c @@ -55,13 +55,6 @@ static struct severity { #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S) #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR) #define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV) -#define MCACOD 0xffff -/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ -#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ -#define MCACOD_SCRUBMSK 0xfff0 -#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ -#define MCACOD_DATA 0x0134 /* Data Load */ -#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ MCESEV( NO, "Invalid", From 61b0fccd7f114573f973dfe25d864608822dc09e Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 19 Jul 2012 11:28:46 -0700 Subject: [PATCH 0054/1098] x86/mce: Add quirk for instruction recovery on Sandy Bridge processors Sandy Bridge processors follow the SDM (Vol 3B, Table 15-20) and set both the RIPV and EIPV bits in the MCG_STATUS register to zero for machine checks during instruction fetch. This is more than a little counter-intuitive and means that Linux cannot recover from these errors. Rather than insert special case code at several places in mce.c and mce-severity.c, we pretend the EIPV bit was set for just this case early in processing the machine check. Acked-by: Borislav Petkov Signed-off-by: Tony Luck Cc: Chen Gong Cc: Huang Ying Cc: Hidetoshi Seto Link: http://lkml.kernel.org/r/180a06f3f357cf9f78259ae443a082b14a29535b.1343078495.git.tony.luck@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 43 +++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5a5a5dc1ff15..8cf60e29790a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -105,6 +105,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { static DEFINE_PER_CPU(struct work_struct, mce_work); +static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs); + /* * CPU/chipset specific EDAC code can register a notifier call here to print * MCE errors in a human-readable form. @@ -652,14 +654,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll); * Do a quick check if any of the events requires a panic. * This decides if we keep the events around or clear them. */ -static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp) +static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, + struct pt_regs *regs) { int i, ret = 0; for (i = 0; i < banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); - if (m->status & MCI_STATUS_VAL) + if (m->status & MCI_STATUS_VAL) { __set_bit(i, validp); + if (quirk_no_way_out) + quirk_no_way_out(i, m, regs); + } if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY) ret = 1; } @@ -1042,7 +1048,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) *final = m; memset(valid_banks, 0, sizeof(valid_banks)); - no_way_out = mce_no_way_out(&m, &msg, valid_banks); + no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs); barrier(); @@ -1418,6 +1424,34 @@ static void __mcheck_cpu_init_generic(void) } } +/* + * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and + * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM + * Vol 3B Table 15-20). But this confuses both the code that determines + * whether the machine check occurred in kernel or user mode, and also + * the severity assessment code. Pretend that EIPV was set, and take the + * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. + */ +static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) +{ + if (bank != 0) + return; + if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) + return; + if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| + MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| + MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| + MCACOD)) != + (MCI_STATUS_UC|MCI_STATUS_EN| + MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| + MCI_STATUS_AR|MCACOD_INSTR)) + return; + + m->mcgstatus |= MCG_STATUS_EIPV; + m->ip = regs->ip; + m->cs = regs->cs; +} + /* Add per CPU specific workarounds here */ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) { @@ -1515,6 +1549,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) */ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; + + if (c->x86 == 6 && c->x86_model == 45) + quirk_no_way_out = quirk_sandybridge_ifu; } if (monarch_timeout < 0) monarch_timeout = 0; From 41fb433b63cc4745f4918fdaf295763da5ca826c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 14 Jul 2012 18:43:08 +0200 Subject: [PATCH 0055/1098] arch/x86/kernel/kdebugfs.c: Ensure a consistent return value in error case Typically, the return value desired for the failure of a function with an integer return value is a negative integer. In these cases, the return value is sometimes a negative integer and sometimes 0, due to a subsequent initialization of the return variable within the loop. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @r exists@ identifier ret; position p; constant C; expression e1,e3,e4; statement S; @@ ret = -C ... when != ret = e3 when any if@p (...) S ... when any if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; } ... when != ret = e3 when any *if@p (...) { ... when != ret = e4 return ret; } // Signed-off-by: Julia Lawall Link: http://lkml.kernel.org/r/1342284188-19176-7-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Ingo Molnar --- arch/x86/kernel/kdebugfs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index 1d5d31ea686b..dc1404bf8e4b 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -107,7 +107,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) { struct setup_data_node *node; struct setup_data *data; - int error = -ENOMEM; + int error; struct dentry *d; struct page *pg; u64 pa_data; @@ -121,8 +121,10 @@ static int __init create_setup_data_nodes(struct dentry *parent) while (pa_data) { node = kmalloc(sizeof(*node), GFP_KERNEL); - if (!node) + if (!node) { + error = -ENOMEM; goto err_dir; + } pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT); if (PageHighMem(pg)) { From e13ab2aac7a273a890d18bb482849610be178bc5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 26 Jul 2012 15:29:03 -0300 Subject: [PATCH 0056/1098] ASoC: mc13783: Provide codec->control_data If codec->control_data is not provided, the following crash happens: Unable to handle kernel NULL pointer dereference at virtual address 00000078 pgd = 80004000 [00000078] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.5.0-next-20120725+ #1263) PC is at regmap_read+0x18/0x64 LR is at hw_read+0x50/0x98 pc : [<802bcd90>] lr : [<803cad18>] psr: 60000013 ... Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/mc13783.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c index 6276e352125f..8f726c063f42 100644 --- a/sound/soc/codecs/mc13783.c +++ b/sound/soc/codecs/mc13783.c @@ -581,6 +581,8 @@ static int mc13783_probe(struct snd_soc_codec *codec) { struct mc13783_priv *priv = snd_soc_codec_get_drvdata(codec); + codec->control_data = priv->mc13xxx; + mc13xxx_lock(priv->mc13xxx); /* these are the reset values */ From 0a88f1f01c5f03f7a21a83aa52454aa930742418 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 18 Jun 2012 18:42:21 +0200 Subject: [PATCH 0057/1098] sound: tegra_wm8903: Adjust to of_get_named_gpio() change of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_wm8903 to this. Signed-off-by: Roland Stigge Acked-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_wm8903.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c index 0c5bb33d258e..d4f14e492341 100644 --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -284,27 +284,27 @@ static __devinit int tegra_wm8903_driver_probe(struct platform_device *pdev) } else if (np) { pdata->gpio_spkr_en = of_get_named_gpio(np, "nvidia,spkr-en-gpios", 0); - if (pdata->gpio_spkr_en == -ENODEV) + if (pdata->gpio_spkr_en == -EPROBE_DEFER) return -EPROBE_DEFER; pdata->gpio_hp_mute = of_get_named_gpio(np, "nvidia,hp-mute-gpios", 0); - if (pdata->gpio_hp_mute == -ENODEV) + if (pdata->gpio_hp_mute == -EPROBE_DEFER) return -EPROBE_DEFER; pdata->gpio_hp_det = of_get_named_gpio(np, "nvidia,hp-det-gpios", 0); - if (pdata->gpio_hp_det == -ENODEV) + if (pdata->gpio_hp_det == -EPROBE_DEFER) return -EPROBE_DEFER; pdata->gpio_int_mic_en = of_get_named_gpio(np, "nvidia,int-mic-en-gpios", 0); - if (pdata->gpio_int_mic_en == -ENODEV) + if (pdata->gpio_int_mic_en == -EPROBE_DEFER) return -EPROBE_DEFER; pdata->gpio_ext_mic_en = of_get_named_gpio(np, "nvidia,ext-mic-en-gpios", 0); - if (pdata->gpio_ext_mic_en == -ENODEV) + if (pdata->gpio_ext_mic_en == -EPROBE_DEFER) return -EPROBE_DEFER; } From bbfc3280ad6701352383e305112b3b27e5b3106f Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 18 Jun 2012 18:42:22 +0200 Subject: [PATCH 0058/1098] sound: tegra_alc5632: Adjust to of_get_named_gpio() change of_get_named_gpio() was changed to return -EPROBE_DEFER in case of gpios not probed yet. This patch adjusts tegra_alc5632 to this. Signed-off-by: Roland Stigge Acked-by: Stephen Warren Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_alc5632.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c index d684df294c0c..e463529b38bb 100644 --- a/sound/soc/tegra/tegra_alc5632.c +++ b/sound/soc/tegra/tegra_alc5632.c @@ -177,7 +177,7 @@ static __devinit int tegra_alc5632_probe(struct platform_device *pdev) } alc5632->gpio_hp_det = of_get_named_gpio(np, "nvidia,hp-det-gpios", 0); - if (alc5632->gpio_hp_det == -ENODEV) + if (alc5632->gpio_hp_det == -EPROBE_DEFER) return -EPROBE_DEFER; ret = snd_soc_of_parse_card_name(card, "nvidia,model"); From 5e70b7fc38a4659540ea5f56f7a1a7da20f4554d Mon Sep 17 00:00:00 2001 From: Guillaume Gardet Date: Thu, 12 Jul 2012 15:08:16 +0200 Subject: [PATCH 0059/1098] ASoC: omap: Add missing modules aliases to get sound working on omap devices This patch add missing modules aliases to get sound working on omap devices. Tested on Beagleboard xM rev. B. This patch is against 3.5-rc6 vanilla. Signed-off-by: Guillaume GARDET Signed-off-by: Mans Rullgard From 18b1ba8becc3dd256bdaad2d825f46b551debda3 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET Date: Tue, 10 Jul 2012 13:47:16 +0200 Subject: [PATCH] Add missing modules aliases to fix audio on omap devices Signed-off-by: Mark Brown --- sound/soc/omap/omap-mcbsp.c | 1 + sound/soc/omap/omap-pcm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 1046083e90a0..acdd3ef14e08 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -820,3 +820,4 @@ module_platform_driver(asoc_mcbsp_driver); MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP I2S SoC Interface"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap-mcbsp"); diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5a649da9122a..f0feb06615f8 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -441,3 +441,4 @@ module_platform_driver(omap_pcm_driver); MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP PCM DMA module"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap-pcm-audio"); From a5ca7345c1e67cd12cf75a9ec034c7d34786ae79 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 23 Jul 2012 21:01:02 +0200 Subject: [PATCH 0060/1098] ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unset If CONFIG_ACPI_SLEEP is unset, the compiler complains that pwr_btn_event_pending is defined but not used. To silence the warning, move the definition of pwr_btn_event_pending under an appropriate #ifdef. Reported-by: Paul E. McKenney Signed-off-by: Rafael J. Wysocki Tested-by: Paul E. McKenney Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 88561029cca8..dca8074b6704 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -57,7 +57,6 @@ MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); static u8 sleep_states[ACPI_S_STATE_COUNT]; -static bool pwr_btn_event_pending; static void acpi_sleep_tts_switch(u32 acpi_state) { @@ -110,6 +109,7 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +static bool pwr_btn_event_pending; /* * The ACPI specification wants us to save NVS memory regions during hibernation From 869639f9e7ff5ca337b27469c298dd11c29cf0fa Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 26 Jul 2012 21:32:01 -0400 Subject: [PATCH 0061/1098] ACPI: replace strlen("string") with sizeof("string") -1 ...both give the number of chars in the string without the '\0', as strncmp() wants, but sizeof() is compile-time. Reported-by: Alan Stern Cc: Pavel Vasilyev Signed-off-by: Len Brown --- drivers/acpi/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 240a24400976..7c3f98ba4afe 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -173,7 +173,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) { int result = 0; - if (!strncmp(val, "enable", strlen("enable"))) { + if (!strncmp(val, "enable", sizeof("enable") - 1)) { result = acpi_debug_trace(trace_method_name, trace_debug_level, trace_debug_layer, 0); if (result) @@ -181,7 +181,7 @@ static int param_set_trace_state(const char *val, struct kernel_param *kp) goto exit; } - if (!strncmp(val, "disable", strlen("disable"))) { + if (!strncmp(val, "disable", sizeof("disable") - 1)) { int name = 0; result = acpi_debug_trace((char *)&name, trace_debug_level, trace_debug_layer, 0); From a2367db2ec5e7fc6fe93e221e0fcdee81b053daf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 3 Jul 2012 15:33:29 -0300 Subject: [PATCH 0062/1098] dma: imx-dma: Fix kernel crash due to missing clock conversion With the new i.MX clock infrastructure we need to request the dma clocks seperately: ahb and ipg clocks. This fixes the following kernel crash and make audio to be functional again: root@freescale /home$ aplay audio48k16S.wav Playing WAVE 'audio48k16S.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c7b74000 [00000000] *pgd=a7bb5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.5.0-rc5-next-20120702-00007-g3028b64 #1128) PC is at snd_dmaengine_pcm_get_chan+0x8/0x10 LR is at snd_imx_pcm_hw_params+0x18/0xdc pc : [] lr : [] psr: a0000013 sp : c7b45e30 ip : ffffffff fp : c7ae58e0 r10: 00000000 r9 : c7ae981c r8 : c7b88800 r7 : c7ae5a60 r6 : c7ae5b20 r5 : c7ae9810 r4 : c7afa060 r3 : 00000000 r2 : 00000001 r1 : c7b88800 r0 : c7afa060 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a7b74000 DAC: 00000015 Process aplay (pid: 701, stack limit = 0xc7b44270) Stack: (0xc7b45e30 to 0xc7b46000) 5e20: 00100000 00000029 c7b88800 c02db870 5e40: c7ae5a60 c02d4594 00000010 01ae5a60 c7ae5a60 c7ae9810 c7ae9810 c7afa060 5e60: c7ae5b20 c7ae5a60 c7b88800 c02e3ef0 c02e3e08 c7b1e400 c7afa060 c7b88800 5e80: 00000000 c0014da8 c7b44000 00000000 bec566ac c02cd400 c7afa060 c7afa060 5ea0: bec56800 c7b88800 c0014da8 c02cdd7c c04ee710 c04ee7b8 00000003 c005fc74 5ec0: 00000000 7fffffff c7b45f00 c7afa060 c7b67420 c7ba3070 00000004 c0014da8 5ee0: c7b44000 00000000 bec566ac c02ced88 c04e95f8 b6f5ab04 c7b45fb0 0145a468 5f00: 0145a600 bec566bc bec56800 c7b67420 c7ba3070 c00d499c c7b45f18 c7b45f18 5f20: 0000001a 00000004 00000001 c7b44000 c0527f40 00000009 00000008 00000000 5f40: c7b44000 c002c9ec 00000001 c04f0ab0 c04ebec0 00000101 00000000 0000000a 5f60: 60000093 c7b67420 bec56800 c25c4111 00000004 c0014da8 c7b44000 00000000 5f80: bec566ac c00d4f38 b6ffb658 00000000 c0522d80 0145a468 b6fd5000 0145a418 5fa0: 00000036 c0014c00 0145a468 b6fd5000 00000004 c25c4111 bec56800 00020001 5fc0: 0145a468 b6fd5000 0145a418 00000036 0145a468 0145a600 bec566bc bec566ac 5fe0: 0145a468 bec56388 b6f65ce4 b6dcebec 20000010 00000004 00000000 00000000 [] (snd_dmaengine_pcm_get_chan+0x8/0x10) from [] (snd_imx_pcm_hw_params+0x18/0xdc) [] (snd_imx_pcm_hw_params+0x18/0xdc) from [] (soc_pcm_hw_params+0xe8/0x1f0) [] (soc_pcm_hw_params+0xe8/0x1f0) from [] (snd_pcm_hw_params+0x124/0x474) [] (snd_pcm_hw_params+0x124/0x474) from [] (snd_pcm_common_ioctl1+0x4b4/0xf74) [] (snd_pcm_common_ioctl1+0x4b4/0xf74) from [] (snd_pcm_playback_ioctl1+0x30/0x510) [] (snd_pcm_playback_ioctl1+0x30/0x510) from [] (do_vfs_ioctl+0x80/0x5e4) [] (do_vfs_ioctl+0x80/0x5e4) from [] (sys_ioctl+0x38/0x60) [] (sys_ioctl+0x38/0x60) from [] (ret_fast_syscall+0x0/0x2c) Code: e593000c e12fff1e e59030a0 e59330bc (e5930000) ---[ end trace fa518c8ba3a74e97 ]-- Reported-by: Javier Martin Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Vinod Koul Cc: stable@vger.kernel.org --- drivers/dma/imx-dma.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index fcfeb3cd8d31..5084975d793c 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -172,7 +172,8 @@ struct imxdma_engine { struct device_dma_parameters dma_parms; struct dma_device dma_device; void __iomem *base; - struct clk *dma_clk; + struct clk *dma_ahb; + struct clk *dma_ipg; spinlock_t lock; struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS]; struct imxdma_channel channel[IMX_DMA_CHANNELS]; @@ -976,10 +977,20 @@ static int __init imxdma_probe(struct platform_device *pdev) return 0; } - imxdma->dma_clk = clk_get(NULL, "dma"); - if (IS_ERR(imxdma->dma_clk)) - return PTR_ERR(imxdma->dma_clk); - clk_enable(imxdma->dma_clk); + imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(imxdma->dma_ipg)) { + ret = PTR_ERR(imxdma->dma_ipg); + goto err_clk; + } + + imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(imxdma->dma_ahb)) { + ret = PTR_ERR(imxdma->dma_ahb); + goto err_clk; + } + + clk_prepare_enable(imxdma->dma_ipg); + clk_prepare_enable(imxdma->dma_ahb); /* reset DMA module */ imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR); @@ -988,16 +999,14 @@ static int __init imxdma_probe(struct platform_device *pdev) ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register IRQ for DMA\n"); - kfree(imxdma); - return ret; + goto err_enable; } ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n"); free_irq(MX1_DMA_INT, NULL); - kfree(imxdma); - return ret; + goto err_enable; } } @@ -1094,7 +1103,10 @@ err_init: free_irq(MX1_DMA_INT, NULL); free_irq(MX1_DMA_ERR, NULL); } - +err_enable: + clk_disable_unprepare(imxdma->dma_ipg); + clk_disable_unprepare(imxdma->dma_ahb); +err_clk: kfree(imxdma); return ret; } @@ -1114,7 +1126,9 @@ static int __exit imxdma_remove(struct platform_device *pdev) free_irq(MX1_DMA_ERR, NULL); } - kfree(imxdma); + clk_disable_unprepare(imxdma->dma_ipg); + clk_disable_unprepare(imxdma->dma_ahb); + kfree(imxdma); return 0; } From 6af2d180f82151cf3d58952e35a4f96e45bc453a Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 26 Jul 2012 16:24:50 +0200 Subject: [PATCH 0063/1098] drm/i915: fix forcewake related hangs on snb ... by adding seemingly redudant posting reads. This little dragon lair exploded the first time around when we've refactored the code a bit to use the common wait_for_atomic_us in "drm/i915: Group the GT routines together in both code and vtable", which caused QA to file fdo bug #51738. Chris Wilson entertained a few approaches to fixing #51738: Replacing the udelay(1) with the previously-used udelay(10) (or any other "sufficiently larger" delay), adding a posting read, or ditching the delay completely and using cpu_relax. We went with the cpu_relax and "915: Workaround hang with BSD and forcewake on SandyBridge". Which blew up in fdo bug #52424, but adding the posting read while still using cpu_relax seems to also fix that, it looks like the posting read is the important ingriedient to fix these rc6 related hangs on snb. Popular theories as to why this is like it is include: - A herd of pink elephants got royally angered somehow. - The gpu has internally different functional units and judging by the register offsets, the forcewake request register and the forcewake ack registers are _not_ in the same functional unit (or at least aren't reached through the same routes). Hence the posting read syncs up with the wrong block and gets the entire gpu confused. - ... As a minimal ducttape fix for 3.6, let's just put these posting reads into place again. We can try fancier approaches (like adding back the cpu_relax instead of the udelay) in -next. This (re-)fixes a regression introduced in commit 990bbdadabaa51828e475eda86ee5720a4910cc3 Author: Chris Wilson Date: Mon Jul 2 11:51:02 2012 -0300 drm/i915: Group the GT routines together in both code and vtable Cc: Chris Wilson Tested-by: Chris Wilson Tested-by: Du Yan Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52424 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738u Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 94aabcaa3a67..58c07cdafb7e 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3963,6 +3963,7 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) DRM_ERROR("Force wake wait timed out\n"); I915_WRITE_NOTRACE(FORCEWAKE, 1); + POSTING_READ(FORCEWAKE); if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) DRM_ERROR("Force wake wait timed out\n"); @@ -3983,6 +3984,7 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) DRM_ERROR("Force wake wait timed out\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1)); + POSTING_READ(FORCEWAKE_MT); if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) DRM_ERROR("Force wake wait timed out\n"); @@ -4018,14 +4020,14 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - /* The below doubles as a POSTING_READ */ + POSTING_READ(FORCEWAKE); gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1)); - /* The below doubles as a POSTING_READ */ + POSTING_READ(FORCEWAKE_MT); gen6_gt_check_fifodbg(dev_priv); } From 057cbf49a1f08297877e46c82f707b1bfea806a8 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 18 Jul 2012 14:31:32 -0700 Subject: [PATCH 0064/1098] tcm_vhost: Initial merge for vhost level target fabric driver This patch adds the initial code for tcm_vhost, a Vhost level TCM fabric driver for virtio SCSI initiators into KVM guest. This code is currently up and running on v3.5-rc2 host+guest from target-pending/for-next-merge. Using tcm_vhost requires Zhi's -> Stefan -> nab's qemu vhost-scsi tree here: http://git.kernel.org/?p=virt/kvm/nab/qemu-kvm.git;a=shortlog;h=refs/heads/vhost-scsi -- Changelog v4 -> v5: Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as starting point for v3.6-rc code (Stefan + ALiguori + nab) Convert vhost_scsi_handle_vq() to vq_err() (nab + MST) Minor style fixes from checkpatch (nab) Changelog v3 -> v4: Rename vhost_vring_target -> vhost_scsi_target (mst + nab) Use TRANSPORT_IQN_LEN in vhost_scsi_target->vhost_wwpn[] def (nab) Move back to drivers/vhost/, and just use drivers/vhost/Kconfig.tcm (mst) Move TCM_VHOST related ioctl defines from include/linux/vhost.h -> drivers/vhost/tcm_vhost.h as requested by MST (nab) Move Kbuild.tcm include from drivers/staging -> drivers/vhost/, and just use 'if STAGING' around 'source drivers/vhost/Kbuild.tcm' Changelog v2 -> v3: Unlock on error in tcm_vhost_drop_nexus() (DanC) Fix strlen() doesn't count the terminator (DanC) Call kfree() on an error path (DanC) Convert tcm_vhost_write_pending to use target_execute_cmd (hch + nab) Fix another strlen() off by one in tcm_vhost_make_tport (DanC) Add option under drivers/staging/Kconfig, and move to drivers/vhost/tcm/ as requested by MST (nab) Changelog v1 -> v2: Fix tv_cmd completion -> release SGL memory leak (nab) Fix sparse warnings for static variable usage ((Fengguang Wu) Fix sparse warnings for min() typing + printk format specs (Fengguang Wu) Convert to cmwq submission for I/O dispatch (nab + hch) Changelog v0 -> v1: Merge into single source + header file, and move to drivers/vhost/ Acked-by: Michael S. Tsirkin Cc: Stefan Hajnoczi Cc: Anthony Liguori Cc: Zhi Yong Wu Cc: Paolo Bonzini Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Jens Axboe Signed-off-by: Nicholas Bellinger --- drivers/vhost/Kconfig | 3 + drivers/vhost/Kconfig.tcm | 6 + drivers/vhost/Makefile | 2 + drivers/vhost/tcm_vhost.c | 1628 +++++++++++++++++++++++++++++++++++++ drivers/vhost/tcm_vhost.h | 101 +++ 5 files changed, 1740 insertions(+) create mode 100644 drivers/vhost/Kconfig.tcm create mode 100644 drivers/vhost/tcm_vhost.c create mode 100644 drivers/vhost/tcm_vhost.h diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig index e4e2fd1b5107..202bba6c997c 100644 --- a/drivers/vhost/Kconfig +++ b/drivers/vhost/Kconfig @@ -9,3 +9,6 @@ config VHOST_NET To compile this driver as a module, choose M here: the module will be called vhost_net. +if STAGING +source "drivers/vhost/Kconfig.tcm" +endif diff --git a/drivers/vhost/Kconfig.tcm b/drivers/vhost/Kconfig.tcm new file mode 100644 index 000000000000..a9c6f76e3208 --- /dev/null +++ b/drivers/vhost/Kconfig.tcm @@ -0,0 +1,6 @@ +config TCM_VHOST + tristate "TCM_VHOST fabric module (EXPERIMENTAL)" + depends on TARGET_CORE && EVENTFD && EXPERIMENTAL && m + default n + ---help--- + Say M here to enable the TCM_VHOST fabric module for use with virtio-scsi guests diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile index 72dd02050bb9..a27b053bc9ab 100644 --- a/drivers/vhost/Makefile +++ b/drivers/vhost/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_VHOST_NET) += vhost_net.o vhost_net-y := vhost.o net.o + +obj-$(CONFIG_TCM_VHOST) += tcm_vhost.o diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c new file mode 100644 index 000000000000..fb366540ed54 --- /dev/null +++ b/drivers/vhost/tcm_vhost.c @@ -0,0 +1,1628 @@ +/******************************************************************************* + * Vhost kernel TCM fabric driver for virtio SCSI initiators + * + * (C) Copyright 2010-2012 RisingTide Systems LLC. + * (C) Copyright 2010-2012 IBM Corp. + * + * Licensed to the Linux Foundation under the General Public License (GPL) version 2. + * + * Authors: Nicholas A. Bellinger + * Stefan Hajnoczi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + ****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* TODO vhost.h currently depends on this */ +#include + +#include "vhost.c" +#include "vhost.h" +#include "tcm_vhost.h" + +struct vhost_scsi { + atomic_t vhost_ref_cnt; + struct tcm_vhost_tpg *vs_tpg; + struct vhost_dev dev; + struct vhost_virtqueue vqs[3]; + + struct vhost_work vs_completion_work; /* cmd completion work item */ + struct list_head vs_completion_list; /* cmd completion queue */ + spinlock_t vs_completion_lock; /* protects s_completion_list */ +}; + +/* Local pointer to allocated TCM configfs fabric module */ +static struct target_fabric_configfs *tcm_vhost_fabric_configfs; + +static struct workqueue_struct *tcm_vhost_workqueue; + +/* Global spinlock to protect tcm_vhost TPG list for vhost IOCTL access */ +static DEFINE_MUTEX(tcm_vhost_mutex); +static LIST_HEAD(tcm_vhost_list); + +static int tcm_vhost_check_true(struct se_portal_group *se_tpg) +{ + return 1; +} + +static int tcm_vhost_check_false(struct se_portal_group *se_tpg) +{ + return 0; +} + +static char *tcm_vhost_get_fabric_name(void) +{ + return "vhost"; +} + +static u8 tcm_vhost_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_fabric_proto_ident(se_tpg); + case SCSI_PROTOCOL_FCP: + return fc_get_fabric_proto_ident(se_tpg); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_fabric_proto_ident(se_tpg); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_fabric_proto_ident(se_tpg); +} + +static char *tcm_vhost_get_fabric_wwn(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + return &tport->tport_name[0]; +} + +static u16 tcm_vhost_get_tag(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + return tpg->tport_tpgt; +} + +static u32 tcm_vhost_get_default_depth(struct se_portal_group *se_tpg) +{ + return 1; +} + +static u32 tcm_vhost_get_pr_transport_id( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_pr_transport_id(se_tpg, se_nacl, pr_reg, + format_code, buf); +} + +static u32 tcm_vhost_get_pr_transport_id_len( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_get_pr_transport_id_len(se_tpg, se_nacl, pr_reg, + format_code); +} + +static char *tcm_vhost_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport = tpg->tport; + + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + case SCSI_PROTOCOL_FCP: + return fc_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + case SCSI_PROTOCOL_ISCSI: + return iscsi_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); + default: + pr_err("Unknown tport_proto_id: 0x%02x, using" + " SAS emulation\n", tport->tport_proto_id); + break; + } + + return sas_parse_pr_out_transport_id(se_tpg, buf, out_tid_len, + port_nexus_ptr); +} + +static struct se_node_acl *tcm_vhost_alloc_fabric_acl( + struct se_portal_group *se_tpg) +{ + struct tcm_vhost_nacl *nacl; + + nacl = kzalloc(sizeof(struct tcm_vhost_nacl), GFP_KERNEL); + if (!nacl) { + pr_err("Unable to alocate struct tcm_vhost_nacl\n"); + return NULL; + } + + return &nacl->se_node_acl; +} + +static void tcm_vhost_release_fabric_acl( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl) +{ + struct tcm_vhost_nacl *nacl = container_of(se_nacl, + struct tcm_vhost_nacl, se_node_acl); + kfree(nacl); +} + +static u32 tcm_vhost_tpg_get_inst_index(struct se_portal_group *se_tpg) +{ + return 1; +} + +static void tcm_vhost_release_cmd(struct se_cmd *se_cmd) +{ + return; +} + +static int tcm_vhost_shutdown_session(struct se_session *se_sess) +{ + return 0; +} + +static void tcm_vhost_close_session(struct se_session *se_sess) +{ + return; +} + +static u32 tcm_vhost_sess_get_index(struct se_session *se_sess) +{ + return 0; +} + +static int tcm_vhost_write_pending(struct se_cmd *se_cmd) +{ + /* Go ahead and process the write immediately */ + target_execute_cmd(se_cmd); + return 0; +} + +static int tcm_vhost_write_pending_status(struct se_cmd *se_cmd) +{ + return 0; +} + +static void tcm_vhost_set_default_node_attrs(struct se_node_acl *nacl) +{ + return; +} + +static u32 tcm_vhost_get_task_tag(struct se_cmd *se_cmd) +{ + return 0; +} + +static int tcm_vhost_get_cmd_state(struct se_cmd *se_cmd) +{ + return 0; +} + +static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *); + +static int tcm_vhost_queue_data_in(struct se_cmd *se_cmd) +{ + struct tcm_vhost_cmd *tv_cmd = container_of(se_cmd, + struct tcm_vhost_cmd, tvc_se_cmd); + vhost_scsi_complete_cmd(tv_cmd); + return 0; +} + +static int tcm_vhost_queue_status(struct se_cmd *se_cmd) +{ + struct tcm_vhost_cmd *tv_cmd = container_of(se_cmd, + struct tcm_vhost_cmd, tvc_se_cmd); + vhost_scsi_complete_cmd(tv_cmd); + return 0; +} + +static int tcm_vhost_queue_tm_rsp(struct se_cmd *se_cmd) +{ + return 0; +} + +static u16 tcm_vhost_set_fabric_sense_len(struct se_cmd *se_cmd, + u32 sense_length) +{ + return 0; +} + +static u16 tcm_vhost_get_fabric_sense_len(void) +{ + return 0; +} + +static void vhost_scsi_free_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + + /* TODO locking against target/backend threads? */ + transport_generic_free_cmd(se_cmd, 1); + + if (tv_cmd->tvc_sgl_count) { + u32 i; + for (i = 0; i < tv_cmd->tvc_sgl_count; i++) + put_page(sg_page(&tv_cmd->tvc_sgl[i])); + + kfree(tv_cmd->tvc_sgl); + } + + kfree(tv_cmd); +} + +/* Dequeue a command from the completion list */ +static struct tcm_vhost_cmd *vhost_scsi_get_cmd_from_completion( + struct vhost_scsi *vs) +{ + struct tcm_vhost_cmd *tv_cmd = NULL; + + spin_lock_bh(&vs->vs_completion_lock); + if (list_empty(&vs->vs_completion_list)) { + spin_unlock_bh(&vs->vs_completion_lock); + return NULL; + } + + list_for_each_entry(tv_cmd, &vs->vs_completion_list, + tvc_completion_list) { + list_del(&tv_cmd->tvc_completion_list); + break; + } + spin_unlock_bh(&vs->vs_completion_lock); + return tv_cmd; +} + +/* Fill in status and signal that we are done processing this command + * + * This is scheduled in the vhost work queue so we are called with the owner + * process mm and can access the vring. + */ +static void vhost_scsi_complete_cmd_work(struct vhost_work *work) +{ + struct vhost_scsi *vs = container_of(work, struct vhost_scsi, + vs_completion_work); + struct tcm_vhost_cmd *tv_cmd; + + while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs)) != NULL) { + struct virtio_scsi_cmd_resp v_rsp; + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + int ret; + + pr_debug("%s tv_cmd %p resid %u status %#02x\n", __func__, + tv_cmd, se_cmd->residual_count, se_cmd->scsi_status); + + memset(&v_rsp, 0, sizeof(v_rsp)); + v_rsp.resid = se_cmd->residual_count; + /* TODO is status_qualifier field needed? */ + v_rsp.status = se_cmd->scsi_status; + v_rsp.sense_len = se_cmd->scsi_sense_length; + memcpy(v_rsp.sense, tv_cmd->tvc_sense_buf, + v_rsp.sense_len); + ret = copy_to_user(tv_cmd->tvc_resp, &v_rsp, sizeof(v_rsp)); + if (likely(ret == 0)) + vhost_add_used(&vs->vqs[2], tv_cmd->tvc_vq_desc, 0); + else + pr_err("Faulted on virtio_scsi_cmd_resp\n"); + + vhost_scsi_free_cmd(tv_cmd); + } + + vhost_signal(&vs->dev, &vs->vqs[2]); +} + +static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct vhost_scsi *vs = tv_cmd->tvc_vhost; + + pr_debug("%s tv_cmd %p\n", __func__, tv_cmd); + + spin_lock_bh(&vs->vs_completion_lock); + list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); + spin_unlock_bh(&vs->vs_completion_lock); + + vhost_work_queue(&vs->dev, &vs->vs_completion_work); +} + +static struct tcm_vhost_cmd *vhost_scsi_allocate_cmd( + struct tcm_vhost_tpg *tv_tpg, + struct virtio_scsi_cmd_req *v_req, + u32 exp_data_len, + int data_direction) +{ + struct tcm_vhost_cmd *tv_cmd; + struct tcm_vhost_nexus *tv_nexus; + struct se_portal_group *se_tpg = &tv_tpg->se_tpg; + struct se_session *se_sess; + struct se_cmd *se_cmd; + int sam_task_attr; + + tv_nexus = tv_tpg->tpg_nexus; + if (!tv_nexus) { + pr_err("Unable to locate active struct tcm_vhost_nexus\n"); + return ERR_PTR(-EIO); + } + se_sess = tv_nexus->tvn_se_sess; + + tv_cmd = kzalloc(sizeof(struct tcm_vhost_cmd), GFP_ATOMIC); + if (!tv_cmd) { + pr_err("Unable to allocate struct tcm_vhost_cmd\n"); + return ERR_PTR(-ENOMEM); + } + INIT_LIST_HEAD(&tv_cmd->tvc_completion_list); + tv_cmd->tvc_tag = v_req->tag; + + se_cmd = &tv_cmd->tvc_se_cmd; + /* + * Locate the SAM Task Attr from virtio_scsi_cmd_req + */ + sam_task_attr = v_req->task_attr; + /* + * Initialize struct se_cmd descriptor from TCM infrastructure + */ + transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, exp_data_len, + data_direction, sam_task_attr, + &tv_cmd->tvc_sense_buf[0]); + +#if 0 /* FIXME: vhost_scsi_allocate_cmd() BIDI operation */ + if (bidi) + se_cmd->se_cmd_flags |= SCF_BIDI; +#endif + return tv_cmd; +} + +/* + * Map a user memory range into a scatterlist + * + * Returns the number of scatterlist entries used or -errno on error. + */ +static int vhost_scsi_map_to_sgl(struct scatterlist *sgl, + unsigned int sgl_count, void __user *ptr, size_t len, int write) +{ + struct scatterlist *sg = sgl; + unsigned int npages = 0; + int ret; + + while (len > 0) { + struct page *page; + unsigned int offset = (uintptr_t)ptr & ~PAGE_MASK; + unsigned int nbytes = min_t(unsigned int, + PAGE_SIZE - offset, len); + + if (npages == sgl_count) { + ret = -ENOBUFS; + goto err; + } + + ret = get_user_pages_fast((unsigned long)ptr, 1, write, &page); + BUG_ON(ret == 0); /* we should either get our page or fail */ + if (ret < 0) + goto err; + + sg_set_page(sg, page, nbytes, offset); + ptr += nbytes; + len -= nbytes; + sg++; + npages++; + } + return npages; + +err: + /* Put pages that we hold */ + for (sg = sgl; sg != &sgl[npages]; sg++) + put_page(sg_page(sg)); + return ret; +} + +static int vhost_scsi_map_iov_to_sgl(struct tcm_vhost_cmd *tv_cmd, + struct iovec *iov, unsigned int niov, int write) +{ + int ret; + unsigned int i; + u32 sgl_count; + struct scatterlist *sg; + + /* + * Find out how long sglist needs to be + */ + sgl_count = 0; + for (i = 0; i < niov; i++) { + sgl_count += (((uintptr_t)iov[i].iov_base + iov[i].iov_len + + PAGE_SIZE - 1) >> PAGE_SHIFT) - + ((uintptr_t)iov[i].iov_base >> PAGE_SHIFT); + } + /* TODO overflow checking */ + + sg = kmalloc(sizeof(tv_cmd->tvc_sgl[0]) * sgl_count, GFP_ATOMIC); + if (!sg) + return -ENOMEM; + pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__, + sg, sgl_count, IS_ERR(sg)); + sg_init_table(sg, sgl_count); + + tv_cmd->tvc_sgl = sg; + tv_cmd->tvc_sgl_count = sgl_count; + + pr_debug("Mapping %u iovecs for %u pages\n", niov, sgl_count); + for (i = 0; i < niov; i++) { + ret = vhost_scsi_map_to_sgl(sg, sgl_count, iov[i].iov_base, + iov[i].iov_len, write); + if (ret < 0) { + for (i = 0; i < tv_cmd->tvc_sgl_count; i++) + put_page(sg_page(&tv_cmd->tvc_sgl[i])); + kfree(tv_cmd->tvc_sgl); + tv_cmd->tvc_sgl = NULL; + tv_cmd->tvc_sgl_count = 0; + return ret; + } + + sg += ret; + sgl_count -= ret; + } + return 0; +} + +static void tcm_vhost_submission_work(struct work_struct *work) +{ + struct tcm_vhost_cmd *tv_cmd = + container_of(work, struct tcm_vhost_cmd, work); + struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; + struct scatterlist *sg_ptr, *sg_bidi_ptr = NULL; + int rc, sg_no_bidi = 0; + /* + * Locate the struct se_lun pointer based on v_req->lun, and + * attach it to struct se_cmd + */ + rc = transport_lookup_cmd_lun(&tv_cmd->tvc_se_cmd, tv_cmd->tvc_lun); + if (rc < 0) { + pr_err("Failed to look up lun: %d\n", tv_cmd->tvc_lun); + transport_send_check_condition_and_sense(&tv_cmd->tvc_se_cmd, + tv_cmd->tvc_se_cmd.scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + + rc = target_setup_cmd_from_cdb(se_cmd, tv_cmd->tvc_cdb); + if (rc == -ENOMEM) { + transport_send_check_condition_and_sense(se_cmd, + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } else if (rc < 0) { + if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT) + tcm_vhost_queue_status(se_cmd); + else + transport_send_check_condition_and_sense(se_cmd, + se_cmd->scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + + if (tv_cmd->tvc_sgl_count) { + sg_ptr = tv_cmd->tvc_sgl; + /* + * For BIDI commands, pass in the extra READ buffer + * to transport_generic_map_mem_to_cmd() below.. + */ +/* FIXME: Fix BIDI operation in tcm_vhost_submission_work() */ +#if 0 + if (se_cmd->se_cmd_flags & SCF_BIDI) { + sg_bidi_ptr = NULL; + sg_no_bidi = 0; + } +#endif + } else { + sg_ptr = NULL; + } + + rc = transport_generic_map_mem_to_cmd(se_cmd, sg_ptr, + tv_cmd->tvc_sgl_count, sg_bidi_ptr, + sg_no_bidi); + if (rc < 0) { + transport_send_check_condition_and_sense(se_cmd, + se_cmd->scsi_sense_reason, 0); + transport_generic_free_cmd(se_cmd, 0); + return; + } + transport_handle_cdb_direct(se_cmd); +} + +static void vhost_scsi_handle_vq(struct vhost_scsi *vs) +{ + struct vhost_virtqueue *vq = &vs->vqs[2]; + struct virtio_scsi_cmd_req v_req; + struct tcm_vhost_tpg *tv_tpg; + struct tcm_vhost_cmd *tv_cmd; + u32 exp_data_len, data_first, data_num, data_direction; + unsigned out, in, i; + int head, ret; + + /* Must use ioctl VHOST_SCSI_SET_ENDPOINT */ + tv_tpg = vs->vs_tpg; + if (unlikely(!tv_tpg)) { + pr_err("%s endpoint not set\n", __func__); + return; + } + + mutex_lock(&vq->mutex); + vhost_disable_notify(&vs->dev, vq); + + for (;;) { + head = vhost_get_vq_desc(&vs->dev, vq, vq->iov, + ARRAY_SIZE(vq->iov), &out, &in, + NULL, NULL); + pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n", + head, out, in); + /* On error, stop handling until the next kick. */ + if (unlikely(head < 0)) + break; + /* Nothing new? Wait for eventfd to tell us they refilled. */ + if (head == vq->num) { + if (unlikely(vhost_enable_notify(&vs->dev, vq))) { + vhost_disable_notify(&vs->dev, vq); + continue; + } + break; + } + +/* FIXME: BIDI operation */ + if (out == 1 && in == 1) { + data_direction = DMA_NONE; + data_first = 0; + data_num = 0; + } else if (out == 1 && in > 1) { + data_direction = DMA_FROM_DEVICE; + data_first = out + 1; + data_num = in - 1; + } else if (out > 1 && in == 1) { + data_direction = DMA_TO_DEVICE; + data_first = 1; + data_num = out - 1; + } else { + vq_err(vq, "Invalid buffer layout out: %u in: %u\n", + out, in); + break; + } + + /* + * Check for a sane resp buffer so we can report errors to + * the guest. + */ + if (unlikely(vq->iov[out].iov_len != + sizeof(struct virtio_scsi_cmd_resp))) { + vq_err(vq, "Expecting virtio_scsi_cmd_resp, got %zu" + " bytes\n", vq->iov[out].iov_len); + break; + } + + if (unlikely(vq->iov[0].iov_len != sizeof(v_req))) { + vq_err(vq, "Expecting virtio_scsi_cmd_req, got %zu" + " bytes\n", vq->iov[0].iov_len); + break; + } + pr_debug("Calling __copy_from_user: vq->iov[0].iov_base: %p," + " len: %zu\n", vq->iov[0].iov_base, sizeof(v_req)); + ret = __copy_from_user(&v_req, vq->iov[0].iov_base, + sizeof(v_req)); + if (unlikely(ret)) { + vq_err(vq, "Faulted on virtio_scsi_cmd_req\n"); + break; + } + + exp_data_len = 0; + for (i = 0; i < data_num; i++) + exp_data_len += vq->iov[data_first + i].iov_len; + + tv_cmd = vhost_scsi_allocate_cmd(tv_tpg, &v_req, + exp_data_len, data_direction); + if (IS_ERR(tv_cmd)) { + vq_err(vq, "vhost_scsi_allocate_cmd failed %ld\n", + PTR_ERR(tv_cmd)); + break; + } + pr_debug("Allocated tv_cmd: %p exp_data_len: %d, data_direction" + ": %d\n", tv_cmd, exp_data_len, data_direction); + + tv_cmd->tvc_vhost = vs; + + if (unlikely(vq->iov[out].iov_len != + sizeof(struct virtio_scsi_cmd_resp))) { + vq_err(vq, "Expecting virtio_scsi_cmd_resp, got %zu" + " bytes, out: %d, in: %d\n", + vq->iov[out].iov_len, out, in); + break; + } + + tv_cmd->tvc_resp = vq->iov[out].iov_base; + + /* + * Copy in the recieved CDB descriptor into tv_cmd->tvc_cdb + * that will be used by tcm_vhost_new_cmd_map() and down into + * target_setup_cmd_from_cdb() + */ + memcpy(tv_cmd->tvc_cdb, v_req.cdb, TCM_VHOST_MAX_CDB_SIZE); + /* + * Check that the recieved CDB size does not exceeded our + * hardcoded max for tcm_vhost + */ + /* TODO what if cdb was too small for varlen cdb header? */ + if (unlikely(scsi_command_size(tv_cmd->tvc_cdb) > + TCM_VHOST_MAX_CDB_SIZE)) { + vq_err(vq, "Received SCSI CDB with command_size: %d that" + " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", + scsi_command_size(tv_cmd->tvc_cdb), + TCM_VHOST_MAX_CDB_SIZE); + break; /* TODO */ + } + tv_cmd->tvc_lun = ((v_req.lun[2] << 8) | v_req.lun[3]) & 0x3FFF; + + pr_debug("vhost_scsi got command opcode: %#02x, lun: %d\n", + tv_cmd->tvc_cdb[0], tv_cmd->tvc_lun); + + if (data_direction != DMA_NONE) { + ret = vhost_scsi_map_iov_to_sgl(tv_cmd, + &vq->iov[data_first], data_num, + data_direction == DMA_TO_DEVICE); + if (unlikely(ret)) { + vq_err(vq, "Failed to map iov to sgl\n"); + break; /* TODO */ + } + } + + /* + * Save the descriptor from vhost_get_vq_desc() to be used to + * complete the virtio-scsi request in TCM callback context via + * tcm_vhost_queue_data_in() and tcm_vhost_queue_status() + */ + tv_cmd->tvc_vq_desc = head; + /* + * Dispatch tv_cmd descriptor for cmwq execution in process + * context provided by tcm_vhost_workqueue. This also ensures + * tv_cmd is executed on the same kworker CPU as this vhost + * thread to gain positive L2 cache locality effects.. + */ + INIT_WORK(&tv_cmd->work, tcm_vhost_submission_work); + queue_work(tcm_vhost_workqueue, &tv_cmd->work); + } + + mutex_unlock(&vq->mutex); +} + +static void vhost_scsi_ctl_handle_kick(struct vhost_work *work) +{ + pr_err("%s: The handling func for control queue.\n", __func__); +} + +static void vhost_scsi_evt_handle_kick(struct vhost_work *work) +{ + pr_err("%s: The handling func for event queue.\n", __func__); +} + +static void vhost_scsi_handle_kick(struct vhost_work *work) +{ + struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue, + poll.work); + struct vhost_scsi *vs = container_of(vq->dev, struct vhost_scsi, dev); + + vhost_scsi_handle_vq(vs); +} + +/* + * Called from vhost_scsi_ioctl() context to walk the list of available + * tcm_vhost_tpg with an active struct tcm_vhost_nexus + */ +static int vhost_scsi_set_endpoint( + struct vhost_scsi *vs, + struct vhost_scsi_target *t) +{ + struct tcm_vhost_tport *tv_tport; + struct tcm_vhost_tpg *tv_tpg; + int index; + + mutex_lock(&vs->dev.mutex); + /* Verify that ring has been setup correctly. */ + for (index = 0; index < vs->dev.nvqs; ++index) { + /* Verify that ring has been setup correctly. */ + if (!vhost_vq_access_ok(&vs->vqs[index])) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + } + + if (vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + return -EEXIST; + } + mutex_unlock(&vs->dev.mutex); + + mutex_lock(&tcm_vhost_mutex); + list_for_each_entry(tv_tpg, &tcm_vhost_list, tv_tpg_list) { + mutex_lock(&tv_tpg->tv_tpg_mutex); + if (!tv_tpg->tpg_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + continue; + } + if (atomic_read(&tv_tpg->tv_tpg_vhost_count)) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + continue; + } + tv_tport = tv_tpg->tport; + + if (!strcmp(tv_tport->tport_name, t->vhost_wwpn) && + (tv_tpg->tport_tpgt == t->vhost_tpgt)) { + atomic_inc(&tv_tpg->tv_tpg_vhost_count); + smp_mb__after_atomic_inc(); + mutex_unlock(&tv_tpg->tv_tpg_mutex); + mutex_unlock(&tcm_vhost_mutex); + + mutex_lock(&vs->dev.mutex); + vs->vs_tpg = tv_tpg; + atomic_inc(&vs->vhost_ref_cnt); + smp_mb__after_atomic_inc(); + mutex_unlock(&vs->dev.mutex); + return 0; + } + mutex_unlock(&tv_tpg->tv_tpg_mutex); + } + mutex_unlock(&tcm_vhost_mutex); + return -EINVAL; +} + +static int vhost_scsi_clear_endpoint( + struct vhost_scsi *vs, + struct vhost_scsi_target *t) +{ + struct tcm_vhost_tport *tv_tport; + struct tcm_vhost_tpg *tv_tpg; + int index; + + mutex_lock(&vs->dev.mutex); + /* Verify that ring has been setup correctly. */ + for (index = 0; index < vs->dev.nvqs; ++index) { + if (!vhost_vq_access_ok(&vs->vqs[index])) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + } + + if (!vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + return -ENODEV; + } + tv_tpg = vs->vs_tpg; + tv_tport = tv_tpg->tport; + + if (strcmp(tv_tport->tport_name, t->vhost_wwpn) || + (tv_tpg->tport_tpgt != t->vhost_tpgt)) { + mutex_unlock(&vs->dev.mutex); + pr_warn("tv_tport->tport_name: %s, tv_tpg->tport_tpgt: %hu" + " does not match t->vhost_wwpn: %s, t->vhost_tpgt: %hu\n", + tv_tport->tport_name, tv_tpg->tport_tpgt, + t->vhost_wwpn, t->vhost_tpgt); + return -EINVAL; + } + atomic_dec(&tv_tpg->tv_tpg_vhost_count); + vs->vs_tpg = NULL; + mutex_unlock(&vs->dev.mutex); + + return 0; +} + +static int vhost_scsi_open(struct inode *inode, struct file *f) +{ + struct vhost_scsi *s; + int r; + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + vhost_work_init(&s->vs_completion_work, vhost_scsi_complete_cmd_work); + INIT_LIST_HEAD(&s->vs_completion_list); + spin_lock_init(&s->vs_completion_lock); + + s->vqs[0].handle_kick = vhost_scsi_ctl_handle_kick; + s->vqs[1].handle_kick = vhost_scsi_evt_handle_kick; + s->vqs[2].handle_kick = vhost_scsi_handle_kick; + r = vhost_dev_init(&s->dev, s->vqs, 3); + if (r < 0) { + kfree(s); + return r; + } + + f->private_data = s; + return 0; +} + +static int vhost_scsi_release(struct inode *inode, struct file *f) +{ + struct vhost_scsi *s = f->private_data; + + if (s->vs_tpg && s->vs_tpg->tport) { + struct vhost_scsi_target backend; + + memcpy(backend.vhost_wwpn, s->vs_tpg->tport->tport_name, + sizeof(backend.vhost_wwpn)); + backend.vhost_tpgt = s->vs_tpg->tport_tpgt; + vhost_scsi_clear_endpoint(s, &backend); + } + + vhost_dev_cleanup(&s->dev, false); + kfree(s); + return 0; +} + +static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) +{ + if (features & ~VHOST_FEATURES) + return -EOPNOTSUPP; + + mutex_lock(&vs->dev.mutex); + if ((features & (1 << VHOST_F_LOG_ALL)) && + !vhost_log_access_ok(&vs->dev)) { + mutex_unlock(&vs->dev.mutex); + return -EFAULT; + } + vs->dev.acked_features = features; + /* TODO possibly smp_wmb() and flush vqs */ + mutex_unlock(&vs->dev.mutex); + return 0; +} + +static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, + unsigned long arg) +{ + struct vhost_scsi *vs = f->private_data; + struct vhost_scsi_target backend; + void __user *argp = (void __user *)arg; + u64 __user *featurep = argp; + u64 features; + int r; + + switch (ioctl) { + case VHOST_SCSI_SET_ENDPOINT: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + + return vhost_scsi_set_endpoint(vs, &backend); + case VHOST_SCSI_CLEAR_ENDPOINT: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + + return vhost_scsi_clear_endpoint(vs, &backend); + case VHOST_SCSI_GET_ABI_VERSION: + if (copy_from_user(&backend, argp, sizeof backend)) + return -EFAULT; + + backend.abi_version = VHOST_SCSI_ABI_VERSION; + + if (copy_to_user(argp, &backend, sizeof backend)) + return -EFAULT; + return 0; + case VHOST_GET_FEATURES: + features = VHOST_FEATURES; + if (copy_to_user(featurep, &features, sizeof features)) + return -EFAULT; + return 0; + case VHOST_SET_FEATURES: + if (copy_from_user(&features, featurep, sizeof features)) + return -EFAULT; + return vhost_scsi_set_features(vs, features); + default: + mutex_lock(&vs->dev.mutex); + r = vhost_dev_ioctl(&vs->dev, ioctl, arg); + mutex_unlock(&vs->dev.mutex); + return r; + } +} + +static const struct file_operations vhost_scsi_fops = { + .owner = THIS_MODULE, + .release = vhost_scsi_release, + .unlocked_ioctl = vhost_scsi_ioctl, + /* TODO compat ioctl? */ + .open = vhost_scsi_open, + .llseek = noop_llseek, +}; + +static struct miscdevice vhost_scsi_misc = { + MISC_DYNAMIC_MINOR, + "vhost-scsi", + &vhost_scsi_fops, +}; + +static int __init vhost_scsi_register(void) +{ + return misc_register(&vhost_scsi_misc); +} + +static int vhost_scsi_deregister(void) +{ + return misc_deregister(&vhost_scsi_misc); +} + +static char *tcm_vhost_dump_proto_id(struct tcm_vhost_tport *tport) +{ + switch (tport->tport_proto_id) { + case SCSI_PROTOCOL_SAS: + return "SAS"; + case SCSI_PROTOCOL_FCP: + return "FCP"; + case SCSI_PROTOCOL_ISCSI: + return "iSCSI"; + default: + break; + } + + return "Unknown"; +} + +static int tcm_vhost_port_link( + struct se_portal_group *se_tpg, + struct se_lun *lun) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + atomic_inc(&tv_tpg->tv_tpg_port_count); + smp_mb__after_atomic_inc(); + + return 0; +} + +static void tcm_vhost_port_unlink( + struct se_portal_group *se_tpg, + struct se_lun *se_lun) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + atomic_dec(&tv_tpg->tv_tpg_port_count); + smp_mb__after_atomic_dec(); +} + +static struct se_node_acl *tcm_vhost_make_nodeacl( + struct se_portal_group *se_tpg, + struct config_group *group, + const char *name) +{ + struct se_node_acl *se_nacl, *se_nacl_new; + struct tcm_vhost_nacl *nacl; + u64 wwpn = 0; + u32 nexus_depth; + + /* tcm_vhost_parse_wwn(name, &wwpn, 1) < 0) + return ERR_PTR(-EINVAL); */ + se_nacl_new = tcm_vhost_alloc_fabric_acl(se_tpg); + if (!se_nacl_new) + return ERR_PTR(-ENOMEM); + + nexus_depth = 1; + /* + * se_nacl_new may be released by core_tpg_add_initiator_node_acl() + * when converting a NodeACL from demo mode -> explict + */ + se_nacl = core_tpg_add_initiator_node_acl(se_tpg, se_nacl_new, + name, nexus_depth); + if (IS_ERR(se_nacl)) { + tcm_vhost_release_fabric_acl(se_tpg, se_nacl_new); + return se_nacl; + } + /* + * Locate our struct tcm_vhost_nacl and set the FC Nport WWPN + */ + nacl = container_of(se_nacl, struct tcm_vhost_nacl, se_node_acl); + nacl->iport_wwpn = wwpn; + + return se_nacl; +} + +static void tcm_vhost_drop_nodeacl(struct se_node_acl *se_acl) +{ + struct tcm_vhost_nacl *nacl = container_of(se_acl, + struct tcm_vhost_nacl, se_node_acl); + core_tpg_del_initiator_node_acl(se_acl->se_tpg, se_acl, 1); + kfree(nacl); +} + +static int tcm_vhost_make_nexus( + struct tcm_vhost_tpg *tv_tpg, + const char *name) +{ + struct se_portal_group *se_tpg; + struct tcm_vhost_nexus *tv_nexus; + + mutex_lock(&tv_tpg->tv_tpg_mutex); + if (tv_tpg->tpg_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_debug("tv_tpg->tpg_nexus already exists\n"); + return -EEXIST; + } + se_tpg = &tv_tpg->se_tpg; + + tv_nexus = kzalloc(sizeof(struct tcm_vhost_nexus), GFP_KERNEL); + if (!tv_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_err("Unable to allocate struct tcm_vhost_nexus\n"); + return -ENOMEM; + } + /* + * Initialize the struct se_session pointer + */ + tv_nexus->tvn_se_sess = transport_init_session(); + if (IS_ERR(tv_nexus->tvn_se_sess)) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + kfree(tv_nexus); + return -ENOMEM; + } + /* + * Since we are running in 'demo mode' this call with generate a + * struct se_node_acl for the tcm_vhost struct se_portal_group with + * the SCSI Initiator port name of the passed configfs group 'name'. + */ + tv_nexus->tvn_se_sess->se_node_acl = core_tpg_check_initiator_node_acl( + se_tpg, (unsigned char *)name); + if (!tv_nexus->tvn_se_sess->se_node_acl) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + pr_debug("core_tpg_check_initiator_node_acl() failed" + " for %s\n", name); + transport_free_session(tv_nexus->tvn_se_sess); + kfree(tv_nexus); + return -ENOMEM; + } + /* + * Now register the TCM vHost virtual I_T Nexus as active with the + * call to __transport_register_session() + */ + __transport_register_session(se_tpg, tv_nexus->tvn_se_sess->se_node_acl, + tv_nexus->tvn_se_sess, tv_nexus); + tv_tpg->tpg_nexus = tv_nexus; + + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return 0; +} + +static int tcm_vhost_drop_nexus( + struct tcm_vhost_tpg *tpg) +{ + struct se_session *se_sess; + struct tcm_vhost_nexus *tv_nexus; + + mutex_lock(&tpg->tv_tpg_mutex); + tv_nexus = tpg->tpg_nexus; + if (!tv_nexus) { + mutex_unlock(&tpg->tv_tpg_mutex); + return -ENODEV; + } + + se_sess = tv_nexus->tvn_se_sess; + if (!se_sess) { + mutex_unlock(&tpg->tv_tpg_mutex); + return -ENODEV; + } + + if (atomic_read(&tpg->tv_tpg_port_count)) { + mutex_unlock(&tpg->tv_tpg_mutex); + pr_err("Unable to remove TCM_vHost I_T Nexus with" + " active TPG port count: %d\n", + atomic_read(&tpg->tv_tpg_port_count)); + return -EPERM; + } + + if (atomic_read(&tpg->tv_tpg_vhost_count)) { + mutex_unlock(&tpg->tv_tpg_mutex); + pr_err("Unable to remove TCM_vHost I_T Nexus with" + " active TPG vhost count: %d\n", + atomic_read(&tpg->tv_tpg_vhost_count)); + return -EPERM; + } + + pr_debug("TCM_vHost_ConfigFS: Removing I_T Nexus to emulated" + " %s Initiator Port: %s\n", tcm_vhost_dump_proto_id(tpg->tport), + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); + /* + * Release the SCSI I_T Nexus to the emulated vHost Target Port + */ + transport_deregister_session(tv_nexus->tvn_se_sess); + tpg->tpg_nexus = NULL; + mutex_unlock(&tpg->tv_tpg_mutex); + + kfree(tv_nexus); + return 0; +} + +static ssize_t tcm_vhost_tpg_show_nexus( + struct se_portal_group *se_tpg, + char *page) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_nexus *tv_nexus; + ssize_t ret; + + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_nexus = tv_tpg->tpg_nexus; + if (!tv_nexus) { + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return -ENODEV; + } + ret = snprintf(page, PAGE_SIZE, "%s\n", + tv_nexus->tvn_se_sess->se_node_acl->initiatorname); + mutex_unlock(&tv_tpg->tv_tpg_mutex); + + return ret; +} + +static ssize_t tcm_vhost_tpg_store_nexus( + struct se_portal_group *se_tpg, + const char *page, + size_t count) +{ + struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + struct tcm_vhost_tport *tport_wwn = tv_tpg->tport; + unsigned char i_port[TCM_VHOST_NAMELEN], *ptr, *port_ptr; + int ret; + /* + * Shutdown the active I_T nexus if 'NULL' is passed.. + */ + if (!strncmp(page, "NULL", 4)) { + ret = tcm_vhost_drop_nexus(tv_tpg); + return (!ret) ? count : ret; + } + /* + * Otherwise make sure the passed virtual Initiator port WWN matches + * the fabric protocol_id set in tcm_vhost_make_tport(), and call + * tcm_vhost_make_nexus(). + */ + if (strlen(page) >= TCM_VHOST_NAMELEN) { + pr_err("Emulated NAA Sas Address: %s, exceeds" + " max: %d\n", page, TCM_VHOST_NAMELEN); + return -EINVAL; + } + snprintf(&i_port[0], TCM_VHOST_NAMELEN, "%s", page); + + ptr = strstr(i_port, "naa."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_SAS) { + pr_err("Passed SAS Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[0]; + goto check_newline; + } + ptr = strstr(i_port, "fc."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_FCP) { + pr_err("Passed FCP Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[3]; /* Skip over "fc." */ + goto check_newline; + } + ptr = strstr(i_port, "iqn."); + if (ptr) { + if (tport_wwn->tport_proto_id != SCSI_PROTOCOL_ISCSI) { + pr_err("Passed iSCSI Initiator Port %s does not" + " match target port protoid: %s\n", i_port, + tcm_vhost_dump_proto_id(tport_wwn)); + return -EINVAL; + } + port_ptr = &i_port[0]; + goto check_newline; + } + pr_err("Unable to locate prefix for emulated Initiator Port:" + " %s\n", i_port); + return -EINVAL; + /* + * Clear any trailing newline for the NAA WWN + */ +check_newline: + if (i_port[strlen(i_port)-1] == '\n') + i_port[strlen(i_port)-1] = '\0'; + + ret = tcm_vhost_make_nexus(tv_tpg, port_ptr); + if (ret < 0) + return ret; + + return count; +} + +TF_TPG_BASE_ATTR(tcm_vhost, nexus, S_IRUGO | S_IWUSR); + +static struct configfs_attribute *tcm_vhost_tpg_attrs[] = { + &tcm_vhost_tpg_nexus.attr, + NULL, +}; + +static struct se_portal_group *tcm_vhost_make_tpg( + struct se_wwn *wwn, + struct config_group *group, + const char *name) +{ + struct tcm_vhost_tport *tport = container_of(wwn, + struct tcm_vhost_tport, tport_wwn); + + struct tcm_vhost_tpg *tpg; + unsigned long tpgt; + int ret; + + if (strstr(name, "tpgt_") != name) + return ERR_PTR(-EINVAL); + if (kstrtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX) + return ERR_PTR(-EINVAL); + + tpg = kzalloc(sizeof(struct tcm_vhost_tpg), GFP_KERNEL); + if (!tpg) { + pr_err("Unable to allocate struct tcm_vhost_tpg"); + return ERR_PTR(-ENOMEM); + } + mutex_init(&tpg->tv_tpg_mutex); + INIT_LIST_HEAD(&tpg->tv_tpg_list); + tpg->tport = tport; + tpg->tport_tpgt = tpgt; + + ret = core_tpg_register(&tcm_vhost_fabric_configfs->tf_ops, wwn, + &tpg->se_tpg, tpg, TRANSPORT_TPG_TYPE_NORMAL); + if (ret < 0) { + kfree(tpg); + return NULL; + } + mutex_lock(&tcm_vhost_mutex); + list_add_tail(&tpg->tv_tpg_list, &tcm_vhost_list); + mutex_unlock(&tcm_vhost_mutex); + + return &tpg->se_tpg; +} + +static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) +{ + struct tcm_vhost_tpg *tpg = container_of(se_tpg, + struct tcm_vhost_tpg, se_tpg); + + mutex_lock(&tcm_vhost_mutex); + list_del(&tpg->tv_tpg_list); + mutex_unlock(&tcm_vhost_mutex); + /* + * Release the virtual I_T Nexus for this vHost TPG + */ + tcm_vhost_drop_nexus(tpg); + /* + * Deregister the se_tpg from TCM.. + */ + core_tpg_deregister(se_tpg); + kfree(tpg); +} + +static struct se_wwn *tcm_vhost_make_tport( + struct target_fabric_configfs *tf, + struct config_group *group, + const char *name) +{ + struct tcm_vhost_tport *tport; + char *ptr; + u64 wwpn = 0; + int off = 0; + + /* if (tcm_vhost_parse_wwn(name, &wwpn, 1) < 0) + return ERR_PTR(-EINVAL); */ + + tport = kzalloc(sizeof(struct tcm_vhost_tport), GFP_KERNEL); + if (!tport) { + pr_err("Unable to allocate struct tcm_vhost_tport"); + return ERR_PTR(-ENOMEM); + } + tport->tport_wwpn = wwpn; + /* + * Determine the emulated Protocol Identifier and Target Port Name + * based on the incoming configfs directory name. + */ + ptr = strstr(name, "naa."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_SAS; + goto check_len; + } + ptr = strstr(name, "fc."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_FCP; + off = 3; /* Skip over "fc." */ + goto check_len; + } + ptr = strstr(name, "iqn."); + if (ptr) { + tport->tport_proto_id = SCSI_PROTOCOL_ISCSI; + goto check_len; + } + + pr_err("Unable to locate prefix for emulated Target Port:" + " %s\n", name); + kfree(tport); + return ERR_PTR(-EINVAL); + +check_len: + if (strlen(name) >= TCM_VHOST_NAMELEN) { + pr_err("Emulated %s Address: %s, exceeds" + " max: %d\n", name, tcm_vhost_dump_proto_id(tport), + TCM_VHOST_NAMELEN); + kfree(tport); + return ERR_PTR(-EINVAL); + } + snprintf(&tport->tport_name[0], TCM_VHOST_NAMELEN, "%s", &name[off]); + + pr_debug("TCM_VHost_ConfigFS: Allocated emulated Target" + " %s Address: %s\n", tcm_vhost_dump_proto_id(tport), name); + + return &tport->tport_wwn; +} + +static void tcm_vhost_drop_tport(struct se_wwn *wwn) +{ + struct tcm_vhost_tport *tport = container_of(wwn, + struct tcm_vhost_tport, tport_wwn); + + pr_debug("TCM_VHost_ConfigFS: Deallocating emulated Target" + " %s Address: %s\n", tcm_vhost_dump_proto_id(tport), + tport->tport_name); + + kfree(tport); +} + +static ssize_t tcm_vhost_wwn_show_attr_version( + struct target_fabric_configfs *tf, + char *page) +{ + return sprintf(page, "TCM_VHOST fabric module %s on %s/%s" + "on "UTS_RELEASE"\n", TCM_VHOST_VERSION, utsname()->sysname, + utsname()->machine); +} + +TF_WWN_ATTR_RO(tcm_vhost, version); + +static struct configfs_attribute *tcm_vhost_wwn_attrs[] = { + &tcm_vhost_wwn_version.attr, + NULL, +}; + +static struct target_core_fabric_ops tcm_vhost_ops = { + .get_fabric_name = tcm_vhost_get_fabric_name, + .get_fabric_proto_ident = tcm_vhost_get_fabric_proto_ident, + .tpg_get_wwn = tcm_vhost_get_fabric_wwn, + .tpg_get_tag = tcm_vhost_get_tag, + .tpg_get_default_depth = tcm_vhost_get_default_depth, + .tpg_get_pr_transport_id = tcm_vhost_get_pr_transport_id, + .tpg_get_pr_transport_id_len = tcm_vhost_get_pr_transport_id_len, + .tpg_parse_pr_out_transport_id = tcm_vhost_parse_pr_out_transport_id, + .tpg_check_demo_mode = tcm_vhost_check_true, + .tpg_check_demo_mode_cache = tcm_vhost_check_true, + .tpg_check_demo_mode_write_protect = tcm_vhost_check_false, + .tpg_check_prod_mode_write_protect = tcm_vhost_check_false, + .tpg_alloc_fabric_acl = tcm_vhost_alloc_fabric_acl, + .tpg_release_fabric_acl = tcm_vhost_release_fabric_acl, + .tpg_get_inst_index = tcm_vhost_tpg_get_inst_index, + .release_cmd = tcm_vhost_release_cmd, + .shutdown_session = tcm_vhost_shutdown_session, + .close_session = tcm_vhost_close_session, + .sess_get_index = tcm_vhost_sess_get_index, + .sess_get_initiator_sid = NULL, + .write_pending = tcm_vhost_write_pending, + .write_pending_status = tcm_vhost_write_pending_status, + .set_default_node_attributes = tcm_vhost_set_default_node_attrs, + .get_task_tag = tcm_vhost_get_task_tag, + .get_cmd_state = tcm_vhost_get_cmd_state, + .queue_data_in = tcm_vhost_queue_data_in, + .queue_status = tcm_vhost_queue_status, + .queue_tm_rsp = tcm_vhost_queue_tm_rsp, + .get_fabric_sense_len = tcm_vhost_get_fabric_sense_len, + .set_fabric_sense_len = tcm_vhost_set_fabric_sense_len, + /* + * Setup callers for generic logic in target_core_fabric_configfs.c + */ + .fabric_make_wwn = tcm_vhost_make_tport, + .fabric_drop_wwn = tcm_vhost_drop_tport, + .fabric_make_tpg = tcm_vhost_make_tpg, + .fabric_drop_tpg = tcm_vhost_drop_tpg, + .fabric_post_link = tcm_vhost_port_link, + .fabric_pre_unlink = tcm_vhost_port_unlink, + .fabric_make_np = NULL, + .fabric_drop_np = NULL, + .fabric_make_nodeacl = tcm_vhost_make_nodeacl, + .fabric_drop_nodeacl = tcm_vhost_drop_nodeacl, +}; + +static int tcm_vhost_register_configfs(void) +{ + struct target_fabric_configfs *fabric; + int ret; + + pr_debug("TCM_VHOST fabric module %s on %s/%s" + " on "UTS_RELEASE"\n", TCM_VHOST_VERSION, utsname()->sysname, + utsname()->machine); + /* + * Register the top level struct config_item_type with TCM core + */ + fabric = target_fabric_configfs_init(THIS_MODULE, "vhost"); + if (IS_ERR(fabric)) { + pr_err("target_fabric_configfs_init() failed\n"); + return PTR_ERR(fabric); + } + /* + * Setup fabric->tf_ops from our local tcm_vhost_ops + */ + fabric->tf_ops = tcm_vhost_ops; + /* + * Setup default attribute lists for various fabric->tf_cit_tmpl + */ + TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = tcm_vhost_wwn_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = tcm_vhost_tpg_attrs; + TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL; + TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL; + /* + * Register the fabric for use within TCM + */ + ret = target_fabric_configfs_register(fabric); + if (ret < 0) { + pr_err("target_fabric_configfs_register() failed" + " for TCM_VHOST\n"); + return ret; + } + /* + * Setup our local pointer to *fabric + */ + tcm_vhost_fabric_configfs = fabric; + pr_debug("TCM_VHOST[0] - Set fabric -> tcm_vhost_fabric_configfs\n"); + return 0; +}; + +static void tcm_vhost_deregister_configfs(void) +{ + if (!tcm_vhost_fabric_configfs) + return; + + target_fabric_configfs_deregister(tcm_vhost_fabric_configfs); + tcm_vhost_fabric_configfs = NULL; + pr_debug("TCM_VHOST[0] - Cleared tcm_vhost_fabric_configfs\n"); +}; + +static int __init tcm_vhost_init(void) +{ + int ret = -ENOMEM; + + tcm_vhost_workqueue = alloc_workqueue("tcm_vhost", 0, 0); + if (!tcm_vhost_workqueue) + goto out; + + ret = vhost_scsi_register(); + if (ret < 0) + goto out_destroy_workqueue; + + ret = tcm_vhost_register_configfs(); + if (ret < 0) + goto out_vhost_scsi_deregister; + + return 0; + +out_vhost_scsi_deregister: + vhost_scsi_deregister(); +out_destroy_workqueue: + destroy_workqueue(tcm_vhost_workqueue); +out: + return ret; +}; + +static void tcm_vhost_exit(void) +{ + tcm_vhost_deregister_configfs(); + vhost_scsi_deregister(); + destroy_workqueue(tcm_vhost_workqueue); +}; + +MODULE_DESCRIPTION("TCM_VHOST series fabric driver"); +MODULE_LICENSE("GPL"); +module_init(tcm_vhost_init); +module_exit(tcm_vhost_exit); diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h new file mode 100644 index 000000000000..c983ed21e413 --- /dev/null +++ b/drivers/vhost/tcm_vhost.h @@ -0,0 +1,101 @@ +#define TCM_VHOST_VERSION "v0.1" +#define TCM_VHOST_NAMELEN 256 +#define TCM_VHOST_MAX_CDB_SIZE 32 + +struct tcm_vhost_cmd { + /* Descriptor from vhost_get_vq_desc() for virt_queue segment */ + int tvc_vq_desc; + /* The Tag from include/linux/virtio_scsi.h:struct virtio_scsi_cmd_req */ + u64 tvc_tag; + /* The number of scatterlists associated with this cmd */ + u32 tvc_sgl_count; + /* Saved unpacked SCSI LUN for tcm_vhost_submission_work() */ + u32 tvc_lun; + /* Pointer to the SGL formatted memory from virtio-scsi */ + struct scatterlist *tvc_sgl; + /* Pointer to response */ + struct virtio_scsi_cmd_resp __user *tvc_resp; + /* Pointer to vhost_scsi for our device */ + struct vhost_scsi *tvc_vhost; + /* The TCM I/O descriptor that is accessed via container_of() */ + struct se_cmd tvc_se_cmd; + /* work item used for cmwq dispatch to tcm_vhost_submission_work() */ + struct work_struct work; + /* Copy of the incoming SCSI command descriptor block (CDB) */ + unsigned char tvc_cdb[TCM_VHOST_MAX_CDB_SIZE]; + /* Sense buffer that will be mapped into outgoing status */ + unsigned char tvc_sense_buf[TRANSPORT_SENSE_BUFFER]; + /* Completed commands list, serviced from vhost worker thread */ + struct list_head tvc_completion_list; +}; + +struct tcm_vhost_nexus { + /* Pointer to TCM session for I_T Nexus */ + struct se_session *tvn_se_sess; +}; + +struct tcm_vhost_nacl { + /* Binary World Wide unique Port Name for Vhost Initiator port */ + u64 iport_wwpn; + /* ASCII formatted WWPN for Sas Initiator port */ + char iport_name[TCM_VHOST_NAMELEN]; + /* Returned by tcm_vhost_make_nodeacl() */ + struct se_node_acl se_node_acl; +}; + +struct tcm_vhost_tpg { + /* Vhost port target portal group tag for TCM */ + u16 tport_tpgt; + /* Used to track number of TPG Port/Lun Links wrt to explict I_T Nexus shutdown */ + atomic_t tv_tpg_port_count; + /* Used for vhost_scsi device reference to tpg_nexus */ + atomic_t tv_tpg_vhost_count; + /* list for tcm_vhost_list */ + struct list_head tv_tpg_list; + /* Used to protect access for tpg_nexus */ + struct mutex tv_tpg_mutex; + /* Pointer to the TCM VHost I_T Nexus for this TPG endpoint */ + struct tcm_vhost_nexus *tpg_nexus; + /* Pointer back to tcm_vhost_tport */ + struct tcm_vhost_tport *tport; + /* Returned by tcm_vhost_make_tpg() */ + struct se_portal_group se_tpg; +}; + +struct tcm_vhost_tport { + /* SCSI protocol the tport is providing */ + u8 tport_proto_id; + /* Binary World Wide unique Port Name for Vhost Target port */ + u64 tport_wwpn; + /* ASCII formatted WWPN for Vhost Target port */ + char tport_name[TCM_VHOST_NAMELEN]; + /* Returned by tcm_vhost_make_tport() */ + struct se_wwn tport_wwn; +}; + +/* + * As per request from MST, keep TCM_VHOST related ioctl defines out of + * linux/vhost.h (user-space) for now.. + */ + +#include + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + */ + +#define VHOST_SCSI_ABI_VERSION 0 + +struct vhost_scsi_target { + int abi_version; + unsigned char vhost_wwpn[TRANSPORT_IQN_LEN]; + unsigned short vhost_tpgt; +}; + +/* VHOST_SCSI specific defines */ +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, struct vhost_scsi_target) From ba846a502c6b3c0ff047861c891fd1afeed6e435 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 29 Jul 2012 16:25:10 +0300 Subject: [PATCH 0065/1098] mac80211: don't clear sched_scan_sdata on sched scan stop request ieee80211_request_sched_scan_stop() cleared local->sched_scan_sdata. However, sched_scan_sdata should be cleared only after the driver calls ieee80211_sched_scan_stopped() (like with normal hw scan). Clearing sched_scan_sdata too early caused ieee80211_sched_scan_stopped_work to exit prematurely without properly cleaning all the sched scan resources and without calling cfg80211_sched_scan_stopped (so userspace wasn't notified about sched scan completion). Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/mac80211/scan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index df36280ed78f..839dd9737989 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -984,7 +984,6 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata) kfree(local->sched_scan_ies.ie[i]); drv_sched_scan_stop(local, sdata); - rcu_assign_pointer(local->sched_scan_sdata, NULL); } out: mutex_unlock(&local->mtx); From 76f16f83ee520d6c10356b0f6ff592441a6f08bd Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 30 Jul 2012 15:42:36 +0800 Subject: [PATCH 0066/1098] crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs Commit feb7b7ab928afa97a79a9c424e4e0691f49d63be changed NSEC_PER_SEC to 64-bit constant, which causes "DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq)" to generate __divdi3 call on 32-bit archs. Fix this by changing DIV_ROUND_UP to DIV_ROUND_UP_ULL. Signed-off-by: Jussi Kivilinna Acked-by: Randy Dunlap Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index c9c4befb5a8d..df14358d7fa1 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -821,8 +821,8 @@ static int hifn_register_rng(struct hifn_device *dev) /* * We must wait at least 256 Pk_clk cycles between two reads of the rng. */ - dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) * - 256; + dev->rng_wait_time = DIV_ROUND_UP_ULL(NSEC_PER_SEC, + dev->pk_clk_freq) * 256; dev->rng.name = dev->name; dev->rng.data_present = hifn_rng_data_present, From 3b6961ba8c682cc71e51079017743c1b282fd259 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 26 Jul 2012 19:40:08 -0400 Subject: [PATCH 0067/1098] ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler' cd74257b974d6d26442c97891c4d05772748b177 patched up GTS/BFS -- a feature we want to remove. So revert it (by hand, due to conflict in sleep.h) to prepare for GTS/BFS removal. Signed-off-by: Len Brown Acked-by: Ingo Molnar Acked-by: Konrad Rzeszutek Wilk --- arch/x86/kernel/acpi/sleep.c | 4 ---- arch/x86/kernel/acpi/sleep.h | 2 -- arch/x86/kernel/acpi/wakeup_32.S | 4 +++- arch/x86/kernel/acpi/wakeup_64.S | 4 +++- 4 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 95bf99de9058..1b8e5a03d942 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -25,10 +25,6 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif -asmlinkage void acpi_enter_s3(void) -{ - acpi_enter_sleep_state(3, wake_sleep_flags); -} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 5653a5791ec9..67f59f8c6956 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,7 +2,6 @@ * Variables and functions used by the code in sleep.c */ -#include #include extern unsigned long saved_video_mode; @@ -11,7 +10,6 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; -extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 72610839f03b..13ab720573e3 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,7 +74,9 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - call acpi_enter_s3 + pushl $3 + call acpi_enter_sleep_state + addl $4, %esp # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 014d1d28c397..8ea5164cbd04 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,7 +71,9 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - call acpi_enter_s3 + movl $3, %edi + xorl %eax, %eax + call acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point From 3f6f49c7854c9294119437a82c5b35be78f9cea6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 26 Jul 2012 20:08:54 -0400 Subject: [PATCH 0068/1098] ACPI: delete _GTS/_BFS support _GTS and _BFS were added to the suspend/resume flow in the ACPI 2.0 specification. Linux dutifully implemented _GTS and _BFS. We discovered that it was rarely seen in systems in the field. Further, some of those systems had AML so bogus that it could never work -- proof that no other operating system supports _GTS and _BFS. So we made _GTS and _BFS optional via modparam, and disabled them by default. But we've had to complicate some code to keep this support in the kernel, as these methods are defined to be evaluated very close to sleep entry and exit. Indeed, no other AML is ever evaluated with interrupts off. We have submitted a proposal for _GTS and _BFS to be officially removed from the ACPI specification on the next revision. Here we remove it from Linux. Signed-off-by: Len Brown Acked-by: Ingo Molnar Acked-by: Konrad Rzeszutek Wilk --- drivers/acpi/acpica/achware.h | 12 +++--- drivers/acpi/acpica/hwesleep.c | 19 ++------- drivers/acpi/acpica/hwsleep.c | 20 ++------- drivers/acpi/acpica/hwxfsleep.c | 22 +++++----- drivers/acpi/sleep.c | 73 ++++----------------------------- include/acpi/acpixf.h | 4 +- include/acpi/actypes.h | 2 +- 7 files changed, 34 insertions(+), 118 deletions(-) diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5ccb99ae3a6f..5de4ec72766d 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -83,22 +83,22 @@ acpi_status acpi_hw_clear_acpi_status(void); /* * hwsleep - sleep/wake support (Legacy sleep registers) */ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_sleep(u8 sleep_state); -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state); -acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags); +acpi_status acpi_hw_legacy_wake(u8 sleep_state); /* * hwesleep - sleep/wake support (Extended FADT-V5 sleep registers) */ void acpi_hw_execute_sleep_method(char *method_name, u32 integer_argument); -acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_sleep(u8 sleep_state); -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state); -acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags); +acpi_status acpi_hw_extended_wake(u8 sleep_state); /* * hwvalid - Port I/O with validation diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c index 48518dac5342..94996f9ae3ad 100644 --- a/drivers/acpi/acpica/hwesleep.c +++ b/drivers/acpi/acpica/hwesleep.c @@ -90,7 +90,6 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * FUNCTION: acpi_hw_extended_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -100,7 +99,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument) * ******************************************************************************/ -acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_sleep(u8 sleep_state) { acpi_status status; u8 sleep_type_value; @@ -125,12 +124,6 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) acpi_gbl_system_awake_and_running = FALSE; - /* Optionally execute _GTS (Going To Sleep) */ - - if (flags & ACPI_EXECUTE_GTS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); - } - /* Flush caches, as per ACPI specification */ ACPI_FLUSH_CPU_CACHE(); @@ -172,7 +165,6 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_extended_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -181,7 +173,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_wake_prep(u8 sleep_state) { acpi_status status; u8 sleep_type_value; @@ -200,11 +192,6 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) &acpi_gbl_FADT.sleep_control); } - /* Optionally execute _BFS (Back From Sleep) */ - - if (flags & ACPI_EXECUTE_BFS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); - } return_ACPI_STATUS(AE_OK); } @@ -222,7 +209,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_extended_wake(u8 sleep_state, u8 flags) +acpi_status acpi_hw_extended_wake(u8 sleep_state) { ACPI_FUNCTION_TRACE(hw_extended_wake); diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 9960fe9ef533..3fddde056a5e 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -56,7 +56,6 @@ ACPI_MODULE_NAME("hwsleep") * FUNCTION: acpi_hw_legacy_sleep * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -64,7 +63,7 @@ ACPI_MODULE_NAME("hwsleep") * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_sleep(u8 sleep_state) { struct acpi_bit_register_info *sleep_type_reg_info; struct acpi_bit_register_info *sleep_enable_reg_info; @@ -110,12 +109,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) return_ACPI_STATUS(status); } - /* Optionally execute _GTS (Going To Sleep) */ - - if (flags & ACPI_EXECUTE_GTS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__GTS, sleep_state); - } - /* Get current value of PM1A control */ status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, @@ -214,7 +207,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake_prep * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - ACPI_EXECUTE_BFS to run optional method * * RETURN: Status * @@ -224,7 +216,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state) { acpi_status status; struct acpi_bit_register_info *sleep_type_reg_info; @@ -275,11 +267,6 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) } } - /* Optionally execute _BFS (Back From Sleep) */ - - if (flags & ACPI_EXECUTE_BFS) { - acpi_hw_execute_sleep_method(METHOD_PATHNAME__BFS, sleep_state); - } return_ACPI_STATUS(status); } @@ -288,7 +275,6 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) * FUNCTION: acpi_hw_legacy_wake * * PARAMETERS: sleep_state - Which sleep state we just exited - * flags - Reserved, set to zero * * RETURN: Status * @@ -297,7 +283,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags) * ******************************************************************************/ -acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags) +acpi_status acpi_hw_legacy_wake(u8 sleep_state) { acpi_status status; diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c index f8684bfe7907..1f165a750ae2 100644 --- a/drivers/acpi/acpica/hwxfsleep.c +++ b/drivers/acpi/acpica/hwxfsleep.c @@ -50,7 +50,7 @@ ACPI_MODULE_NAME("hwxfsleep") /* Local prototypes */ static acpi_status -acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id); +acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id); /* * Dispatch table used to efficiently branch to the various sleep @@ -235,7 +235,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) * ******************************************************************************/ static acpi_status -acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) +acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id) { acpi_status status; struct acpi_sleep_functions *sleep_functions = @@ -248,11 +248,11 @@ acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) * use the extended sleep registers */ if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) { - status = sleep_functions->extended_function(sleep_state, flags); + status = sleep_functions->extended_function(sleep_state); } else { /* Legacy sleep */ - status = sleep_functions->legacy_function(sleep_state, flags); + status = sleep_functions->legacy_function(sleep_state); } return (status); @@ -262,7 +262,7 @@ acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id) * For the case where reduced-hardware-only code is being generated, * we know that only the extended sleep registers are available */ - status = sleep_functions->extended_function(sleep_state, flags); + status = sleep_functions->extended_function(sleep_state); return (status); #endif /* !ACPI_REDUCED_HARDWARE */ @@ -349,7 +349,6 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * FUNCTION: acpi_enter_sleep_state * * PARAMETERS: sleep_state - Which sleep state to enter - * flags - ACPI_EXECUTE_GTS to run optional method * * RETURN: Status * @@ -357,7 +356,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED * ******************************************************************************/ -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) { acpi_status status; @@ -371,7 +370,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags) } status = - acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID); + acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -391,14 +390,14 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) * Called with interrupts DISABLED. * ******************************************************************************/ -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags) +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) { acpi_status status; ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); status = - acpi_hw_sleep_dispatch(sleep_state, flags, + acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID); return_ACPI_STATUS(status); } @@ -423,8 +422,7 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state) ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); - - status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID); + status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 23a53c013f1e..bd35e3c5e530 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,34 +28,6 @@ #include "internal.h" #include "sleep.h" -u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; -static unsigned int gts, bfs; -static int set_param_wake_flag(const char *val, struct kernel_param *kp) -{ - int ret = param_set_int(val, kp); - - if (ret) - return ret; - - if (kp->arg == (const char *)>s) { - if (gts) - wake_sleep_flags |= ACPI_EXECUTE_GTS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_GTS; - } - if (kp->arg == (const char *)&bfs) { - if (bfs) - wake_sleep_flags |= ACPI_EXECUTE_BFS; - else - wake_sleep_flags &= ~ACPI_EXECUTE_BFS; - } - return ret; -} -module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); -module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - static u8 sleep_states[ACPI_S_STATE_COUNT]; static bool pwr_btn_event_pending; @@ -305,7 +277,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); + status = acpi_enter_sleep_state(acpi_state); break; case ACPI_STATE_S3: @@ -319,8 +291,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state) /* This violates the spec but is required for bug compatibility. */ acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(acpi_state); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -603,9 +575,9 @@ static int acpi_hibernation_enter(void) ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } @@ -617,8 +589,8 @@ static void acpi_hibernation_leave(void) * enable it here. */ acpi_enable(); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); + /* Reprogram control registers */ + acpi_leave_sleep_state_prep(ACPI_STATE_S4); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -876,33 +848,7 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); -} - -/* - * ACPI 2.0 created the optional _GTS and _BFS, - * but industry adoption has been neither rapid nor broad. - * - * Linux gets into trouble when it executes poorly validated - * paths through the BIOS, so disable _GTS and _BFS by default, - * but do speak up and offer the option to enable them. - */ -static void __init acpi_gts_bfs_check(void) -{ - acpi_handle dummy; - - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " - "please notify linux-acpi@vger.kernel.org\n"); - } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " - "please notify linux-acpi@vger.kernel.org\n"); - } + acpi_enter_sleep_state(ACPI_STATE_S5); } int __init acpi_sleep_init(void) @@ -963,6 +909,5 @@ int __init acpi_sleep_init(void) * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); - acpi_gts_bfs_check(); return 0; } diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 2c744c7a5b3d..26a92fc28a59 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -491,11 +491,11 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b); acpi_status acpi_enter_sleep_state_prep(u8 sleep_state); -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags); +acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state); ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)) -acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags); +acpi_status acpi_leave_sleep_state_prep(u8 sleep_state); acpi_status acpi_leave_sleep_state(u8 sleep_state); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 3af87de6a68c..3d00bd5bd7e3 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -803,7 +803,7 @@ typedef u8 acpi_adr_space_type; /* Sleep function dispatch */ -typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags); +typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state); struct acpi_sleep_functions { ACPI_SLEEP_FUNCTION legacy_function; From 2d9c86774756193edff2a2a9077264f666c626de Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 30 Jul 2012 22:40:32 +0200 Subject: [PATCH 0069/1098] ACPI / PCI: Do not try to acquire _OSC control if that is hopeless If acpi_pci_osc_support() fails for the given flags, it doesn't make sense to call acpi_pci_osc_control_set() down the road for the same flags, because it will certainly fail too. Moreover, problem diagnostics is then harder, because it is not too easy to identify the reason of the _OSC failure in those cases. For this reason, check the status returned by acpi_pci_osc_support() for PCIe support flags and do not attempt to execute acpi_pci_osc_control_set() for those flags and print a message if it's "failure". For compatibility with the existing code, disable ASPM in that case too. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/pci_root.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 7aff6312ce7c..c86b39217400 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -571,8 +571,15 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) OSC_CLOCK_PWR_CAPABILITY_SUPPORT; if (pci_msi_enabled()) flags |= OSC_MSI_SUPPORT; - if (flags != base_flags) - acpi_pci_osc_support(root, flags); + if (flags != base_flags) { + status = acpi_pci_osc_support(root, flags); + if (ACPI_FAILURE(status)) { + dev_info(root->bus->bridge, "ACPI _OSC support " + "notification failed, disabling PCIe ASPM\n"); + pcie_no_aspm(); + flags = base_flags; + } + } if (!pcie_ports_disabled && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { From 0f26d0e0a715556270d85b7946b99546a2f92888 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 30 Jul 2012 22:44:41 -0500 Subject: [PATCH 0070/1098] kdb: Remove unused KDB_FLAG_ONLY_DO_DUMP This code cleanup was missed in the original kdb merge, and this code is simply not used at all. The code that was previously used to set the KDB_FLAG_ONLY_DO_DUMP was removed prior to the initial kdb merge. Signed-off-by: Jason Wessel --- include/linux/kdb.h | 2 -- kernel/debug/kdb/kdb_main.c | 15 +-------------- 2 files changed, 1 insertion(+), 16 deletions(-) diff --git a/include/linux/kdb.h b/include/linux/kdb.h index 064725854db8..42d9e863a313 100644 --- a/include/linux/kdb.h +++ b/include/linux/kdb.h @@ -75,8 +75,6 @@ extern const char *kdb_diemsg; #define KDB_FLAG_CATASTROPHIC (1 << 1) /* A catastrophic event has occurred */ #define KDB_FLAG_CMD_INTERRUPT (1 << 2) /* Previous command was interrupted */ #define KDB_FLAG_NOIPI (1 << 3) /* Do not send IPIs */ -#define KDB_FLAG_ONLY_DO_DUMP (1 << 4) /* Only do a dump, used when - * kdb is off */ #define KDB_FLAG_NO_CONSOLE (1 << 5) /* No console is available, * kdb is disabled */ #define KDB_FLAG_NO_VT_CONSOLE (1 << 6) /* No VT console is available, do diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 1f91413edb87..31df1706b9a9 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -139,11 +139,10 @@ static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t); static char *__env[] = { #if defined(CONFIG_SMP) "PROMPT=[%d]kdb> ", - "MOREPROMPT=[%d]more> ", #else "PROMPT=kdb> ", - "MOREPROMPT=more> ", #endif + "MOREPROMPT=more> ", "RADIX=16", "MDCOUNT=8", /* lines of md output */ KDB_PLATFORM_ENV, @@ -1236,18 +1235,6 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, *cmdbuf = '\0'; *(cmd_hist[cmd_head]) = '\0'; - if (KDB_FLAG(ONLY_DO_DUMP)) { - /* kdb is off but a catastrophic error requires a dump. - * Take the dump and reboot. - * Turn on logging so the kdb output appears in the log - * buffer in the dump. - */ - const char *setargs[] = { "set", "LOGGING", "1" }; - kdb_set(2, setargs); - kdb_reboot(0, NULL); - /*NOTREACHED*/ - } - do_full_getstr: #if defined(CONFIG_SMP) snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), From 07cd27bbd4d07af6c3e24ae479316a69e7935e1e Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 30 Jul 2012 22:44:41 -0500 Subject: [PATCH 0071/1098] kdb: Remove cpu from the more prompt Having the CPU in the more prompt is completely redundent vs the standard kdb prompt, and it also wastes 32 bytes on the stack. Signed-off-by: Jason Wessel --- kernel/debug/kdb/kdb_io.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index bb9520f0f6ff..0a69d2adc4f3 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -715,9 +715,6 @@ kdb_printit: /* check for having reached the LINES number of printed lines */ if (kdb_nextline == linecount) { char buf1[16] = ""; -#if defined(CONFIG_SMP) - char buf2[32]; -#endif /* Watch out for recursion here. Any routine that calls * kdb_printf will come back through here. And kdb_read @@ -732,14 +729,6 @@ kdb_printit: if (moreprompt == NULL) moreprompt = "more> "; -#if defined(CONFIG_SMP) - if (strchr(moreprompt, '%')) { - sprintf(buf2, moreprompt, get_cpu()); - put_cpu(); - moreprompt = buf2; - } -#endif - kdb_input_flush(); c = console_drivers; From b10d22d6e8f76b9e94871aebe0fc62aab2748200 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 30 Jul 2012 04:58:10 -0700 Subject: [PATCH 0072/1098] kernel/debug: Make use of KGDB_REASON_NMI Currently kernel never set KGDB_REASON_NMI. We do now, when we enter KGDB/KDB from an NMI. This is not to be confused with kgdb_nmicallback(), NMI callback is an entry for the slave CPUs during CPUs roundup, but REASON_NMI is the entry for the master CPU. Signed-off-by: Anton Vorontsov Signed-off-by: Jason Wessel --- kernel/debug/kdb/kdb_debugger.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c index 8b68ce78ff17..be7b33b73d30 100644 --- a/kernel/debug/kdb/kdb_debugger.c +++ b/kernel/debug/kdb/kdb_debugger.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "kdb_private.h" #include "../debug_core.h" @@ -52,6 +53,9 @@ int kdb_stub(struct kgdb_state *ks) if (atomic_read(&kgdb_setting_breakpoint)) reason = KDB_REASON_KEYBOARD; + if (in_nmi()) + reason = KDB_REASON_NMI; + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { if ((bp->bp_enabled) && (bp->bp_addr == addr)) { reason = KDB_REASON_BREAK; From f96a4216e85050c0a9d41a41ecb0ae9d8e39b509 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 30 Jul 2012 16:06:42 +0100 Subject: [PATCH 0073/1098] USB: echi-dbgp: increase the controller wait time to come out of halt. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Cc: Signed-off-by: Colin Ian King Signed-off-by: Jason Wessel --- drivers/usb/early/ehci-dbgp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 1fc8f1249806..347bb058e1ee 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -450,7 +450,7 @@ static int dbgp_ehci_startup(void) writel(FLAG_CF, &ehci_regs->configured_flag); /* Wait until the controller is no longer halted */ - loop = 10; + loop = 1000; do { status = readl(&ehci_regs->status); if (!(status & STS_HALT)) From b9403130a5350fca59a50ed11c198cb8c7e54119 Mon Sep 17 00:00:00 2001 From: Michael Wang Date: Thu, 12 Jul 2012 16:10:13 +0800 Subject: [PATCH 0074/1098] sched/cleanups: Add load balance cpumask pointer to 'struct lb_env' With this patch struct ld_env will have a pointer of the load balancing cpumask and we don't need to pass a cpumask around anymore. Signed-off-by: Michael Wang Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/4FFE8665.3080705@linux.vnet.ibm.com Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 22321db64952..d0cc03b3e70b 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3069,6 +3069,9 @@ struct lb_env { int new_dst_cpu; enum cpu_idle_type idle; long imbalance; + /* The set of CPUs under consideration for load-balancing */ + struct cpumask *cpus; + unsigned int flags; unsigned int loop; @@ -3653,8 +3656,7 @@ fix_small_capacity(struct sched_domain *sd, struct sched_group *group) */ static inline void update_sg_lb_stats(struct lb_env *env, struct sched_group *group, int load_idx, - int local_group, const struct cpumask *cpus, - int *balance, struct sg_lb_stats *sgs) + int local_group, int *balance, struct sg_lb_stats *sgs) { unsigned long nr_running, max_nr_running, min_nr_running; unsigned long load, max_cpu_load, min_cpu_load; @@ -3671,7 +3673,7 @@ static inline void update_sg_lb_stats(struct lb_env *env, max_nr_running = 0; min_nr_running = ~0UL; - for_each_cpu_and(i, sched_group_cpus(group), cpus) { + for_each_cpu_and(i, sched_group_cpus(group), env->cpus) { struct rq *rq = cpu_rq(i); nr_running = rq->nr_running; @@ -3800,8 +3802,7 @@ static bool update_sd_pick_busiest(struct lb_env *env, * @sds: variable to hold the statistics for this sched_domain. */ static inline void update_sd_lb_stats(struct lb_env *env, - const struct cpumask *cpus, - int *balance, struct sd_lb_stats *sds) + int *balance, struct sd_lb_stats *sds) { struct sched_domain *child = env->sd->child; struct sched_group *sg = env->sd->groups; @@ -3818,8 +3819,7 @@ static inline void update_sd_lb_stats(struct lb_env *env, local_group = cpumask_test_cpu(env->dst_cpu, sched_group_cpus(sg)); memset(&sgs, 0, sizeof(sgs)); - update_sg_lb_stats(env, sg, load_idx, local_group, - cpus, balance, &sgs); + update_sg_lb_stats(env, sg, load_idx, local_group, balance, &sgs); if (local_group && !(*balance)) return; @@ -4055,7 +4055,6 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s * to restore balance. * * @env: The load balancing environment. - * @cpus: The set of CPUs under consideration for load-balancing. * @balance: Pointer to a variable indicating if this_cpu * is the appropriate cpu to perform load balancing at this_level. * @@ -4065,7 +4064,7 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s * put to idle by rebalancing its tasks onto our group. */ static struct sched_group * -find_busiest_group(struct lb_env *env, const struct cpumask *cpus, int *balance) +find_busiest_group(struct lb_env *env, int *balance) { struct sd_lb_stats sds; @@ -4075,7 +4074,7 @@ find_busiest_group(struct lb_env *env, const struct cpumask *cpus, int *balance) * Compute the various statistics relavent for load balancing at * this level. */ - update_sd_lb_stats(env, cpus, balance, &sds); + update_sd_lb_stats(env, balance, &sds); /* * this_cpu is not the appropriate cpu to perform load balancing at @@ -4155,8 +4154,7 @@ ret: * find_busiest_queue - find the busiest runqueue among the cpus in group. */ static struct rq *find_busiest_queue(struct lb_env *env, - struct sched_group *group, - const struct cpumask *cpus) + struct sched_group *group) { struct rq *busiest = NULL, *rq; unsigned long max_load = 0; @@ -4171,7 +4169,7 @@ static struct rq *find_busiest_queue(struct lb_env *env, if (!capacity) capacity = fix_small_capacity(env->sd, group); - if (!cpumask_test_cpu(i, cpus)) + if (!cpumask_test_cpu(i, env->cpus)) continue; rq = cpu_rq(i); @@ -4252,6 +4250,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, .dst_grpmask = sched_group_cpus(sd->groups), .idle = idle, .loop_break = sched_nr_migrate_break, + .cpus = cpus, }; cpumask_copy(cpus, cpu_active_mask); @@ -4260,7 +4259,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, schedstat_inc(sd, lb_count[idle]); redo: - group = find_busiest_group(&env, cpus, balance); + group = find_busiest_group(&env, balance); if (*balance == 0) goto out_balanced; @@ -4270,7 +4269,7 @@ redo: goto out_balanced; } - busiest = find_busiest_queue(&env, group, cpus); + busiest = find_busiest_queue(&env, group); if (!busiest) { schedstat_inc(sd, lb_nobusyq[idle]); goto out_balanced; From 7740dfc0363a70546ef25c0383aca252f95a91d2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 21 Jul 2012 10:53:46 +1000 Subject: [PATCH 0075/1098] perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit i386 allmodconfig: arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:728: warning: integer overflow in expression arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_start_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:735: warning: integer overflow in expression Signed-off-by: Andrew Morton Cc: Zheng Yan Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-h84qlqj02zrojmxxybzmy9hi@git.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index f3851892e077..c9e5dc56630a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -5,7 +5,7 @@ #include "perf_event.h" #define UNCORE_PMU_NAME_LEN 32 -#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC) +#define UNCORE_PMU_HRTIMER_INTERVAL (60LL * NSEC_PER_SEC) #define UNCORE_FIXED_EVENT 0xff #define UNCORE_PMC_IDX_MAX_GENERIC 8 From d07bdfd322d307789f15b427dbcc39257665356f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 10 Jul 2012 09:42:15 +0200 Subject: [PATCH 0076/1098] perf/x86: Fix USER/KERNEL tagging of samples properly Some PMUs don't provide a full register set for their sample, specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide 'better' than regular interrupt accuracy. In this case we use the interrupt regs as basis and over-write some fields (typically IP) with different information. The perf core however uses user_mode() to distinguish user/kernel samples, user_mode() relies on regs->cs. If the interrupt skid pushed us over a boundary the new IP might not be in the same domain as the interrupt. Commit ce5c1fe9a9e ("perf/x86: Fix USER/KERNEL tagging of samples") tried to fix this by making the perf core use kernel_ip(). This however is wrong (TM), as pointed out by Linus, since it doesn't allow for VM86 and non-zero based segments in IA32 mode. Therefore, provide a new helper to set the regs->ip field, set_linear_ip(), which massages the regs into a suitable state assuming the provided IP is in fact a linear address. Also modify perf_instruction_pointer() and perf_callchain_user() to deal with segments base offsets. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twins Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event.h | 11 ++- arch/x86/kernel/cpu/perf_event.c | 89 ++++++++++++++++++++--- arch/x86/kernel/cpu/perf_event.h | 20 +++++ arch/x86/kernel/cpu/perf_event_amd_ibs.c | 4 +- arch/x86/kernel/cpu/perf_event_intel_ds.c | 7 +- 5 files changed, 114 insertions(+), 17 deletions(-) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index dab39350e51e..cb4e43bce98a 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -196,11 +196,16 @@ static inline u32 get_ibs_caps(void) { return 0; } extern void perf_events_lapic_init(void); /* - * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups. - * This flag is otherwise unused and ABI specified to be 0, so nobody should - * care what we do with it. + * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise + * unused and ABI specified to be 0, so nobody should care what we do with + * them. + * + * EXACT - the IP points to the exact instruction that triggered the + * event (HW bugs exempt). + * VM - original X86_VM_MASK; see set_linear_ip(). */ #define PERF_EFLAGS_EXACT (1UL << 3) +#define PERF_EFLAGS_VM (1UL << 5) struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 29557aa06dda..915b876edd1e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include "perf_event.h" @@ -1738,6 +1740,29 @@ valid_user_frame(const void __user *fp, unsigned long size) return (__range_not_ok(fp, size, TASK_SIZE) == 0); } +static unsigned long get_segment_base(unsigned int segment) +{ + struct desc_struct *desc; + int idx = segment >> 3; + + if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) { + if (idx > LDT_ENTRIES) + return 0; + + if (idx > current->active_mm->context.size) + return 0; + + desc = current->active_mm->context.ldt; + } else { + if (idx > GDT_ENTRIES) + return 0; + + desc = __this_cpu_ptr(&gdt_page.gdt[0]); + } + + return get_desc_base(desc + idx); +} + #ifdef CONFIG_COMPAT #include @@ -1746,13 +1771,17 @@ static inline int perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) { /* 32-bit process in 64-bit kernel. */ + unsigned long ss_base, cs_base; struct stack_frame_ia32 frame; const void __user *fp; if (!test_thread_flag(TIF_IA32)) return 0; - fp = compat_ptr(regs->bp); + cs_base = get_segment_base(regs->cs); + ss_base = get_segment_base(regs->ss); + + fp = compat_ptr(ss_base + regs->bp); while (entry->nr < PERF_MAX_STACK_DEPTH) { unsigned long bytes; frame.next_frame = 0; @@ -1765,8 +1794,8 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!valid_user_frame(fp, sizeof(frame))) break; - perf_callchain_store(entry, frame.return_address); - fp = compat_ptr(frame.next_frame); + perf_callchain_store(entry, cs_base + frame.return_address); + fp = compat_ptr(ss_base + frame.next_frame); } return 1; } @@ -1789,6 +1818,12 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } + /* + * We don't know what to do with VM86 stacks.. ignore them for now. + */ + if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM)) + return; + fp = (void __user *)regs->bp; perf_callchain_store(entry, regs->ip); @@ -1816,16 +1851,50 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } } +/* + * Deal with code segment offsets for the various execution modes: + * + * VM86 - the good olde 16 bit days, where the linear address is + * 20 bits and we use regs->ip + 0x10 * regs->cs. + * + * IA32 - Where we need to look at GDT/LDT segment descriptor tables + * to figure out what the 32bit base address is. + * + * X32 - has TIF_X32 set, but is running in x86_64 + * + * X86_64 - CS,DS,SS,ES are all zero based. + */ +static unsigned long code_segment_base(struct pt_regs *regs) +{ + /* + * If we are in VM86 mode, add the segment offset to convert to a + * linear address. + */ + if (regs->flags & X86_VM_MASK) + return 0x10 * regs->cs; + + /* + * For IA32 we look at the GDT/LDT segment base to convert the + * effective IP to a linear address. + */ +#ifdef CONFIG_X86_32 + if (user_mode(regs) && regs->cs != __USER_CS) + return get_segment_base(regs->cs); +#else + if (test_thread_flag(TIF_IA32)) { + if (user_mode(regs) && regs->cs != __USER32_CS) + return get_segment_base(regs->cs); + } +#endif + return 0; +} + unsigned long perf_instruction_pointer(struct pt_regs *regs) { - unsigned long ip; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) - ip = perf_guest_cbs->get_guest_ip(); - else - ip = instruction_pointer(regs); + return perf_guest_cbs->get_guest_ip(); - return ip; + return regs->ip + code_segment_base(regs); } unsigned long perf_misc_flags(struct pt_regs *regs) @@ -1838,7 +1907,7 @@ unsigned long perf_misc_flags(struct pt_regs *regs) else misc |= PERF_RECORD_MISC_GUEST_KERNEL; } else { - if (!kernel_ip(regs->ip)) + if (user_mode(regs)) misc |= PERF_RECORD_MISC_USER; else misc |= PERF_RECORD_MISC_KERNEL; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 821d53b696d1..6605a81ba339 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -516,6 +516,26 @@ static inline bool kernel_ip(unsigned long ip) #endif } +/* + * Not all PMUs provide the right context information to place the reported IP + * into full context. Specifically segment registers are typically not + * supplied. + * + * Assuming the address is a linear address (it is for IBS), we fake the CS and + * vm86 mode using the known zero-based code segment and 'fix up' the registers + * to reflect this. + * + * Intel PEBS/LBR appear to typically provide the effective address, nothing + * much we can do about that but pray and treat it like a linear address. + */ +static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip) +{ + regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS; + if (regs->flags & X86_VM_MASK) + regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK); + regs->ip = ip; +} + #ifdef CONFIG_CPU_SUP_AMD int amd_pmu_init(void); diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index da9bcdcd9856..7bfb5bec8630 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -13,6 +13,8 @@ #include +#include "perf_event.h" + static u32 ibs_caps; #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) @@ -536,7 +538,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) { regs.flags &= ~PERF_EFLAGS_EXACT; } else { - instruction_pointer_set(®s, ibs_data.regs[1]); + set_linear_ip(®s, ibs_data.regs[1]); regs.flags |= PERF_EFLAGS_EXACT; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 629ae0b7ad90..e38d97bf4259 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -499,7 +499,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) * We sampled a branch insn, rewind using the LBR stack */ if (ip == to) { - regs->ip = from; + set_linear_ip(regs, from); return 1; } @@ -529,7 +529,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } while (to < ip); if (to == ip) { - regs->ip = old_to; + set_linear_ip(regs, old_to); return 1; } @@ -569,7 +569,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event, * A possible PERF_SAMPLE_REGS will have to transfer all regs. */ regs = *iregs; - regs.ip = pebs->ip; + regs.flags = pebs->flags; + set_linear_ip(®s, pebs->ip); regs.bp = pebs->bp; regs.sp = pebs->sp; From e6dab5ffab59e910ec0e3355f4a6f29f7a7be474 Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Wed, 11 Jul 2012 18:14:58 +0400 Subject: [PATCH 0077/1098] perf/trace: Add ability to set a target task for events A few events are interesting not only for a current task. For example, sched_stat_* events are interesting for a task which wakes up. For this reason, it will be good if such events will be delivered to a target task too. Now a target task can be set by using __perf_task(). The original idea and a draft patch belongs to Peter Zijlstra. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Inspired-by: Peter Zijlstra Cc: Steven Rostedt Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Steven Rostedt Cc: Arun Sharma Signed-off-by: Andrew Vagin Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar --- include/linux/ftrace_event.h | 5 +++-- include/linux/perf_event.h | 3 ++- include/trace/events/sched.h | 4 ++++ include/trace/ftrace.h | 6 +++++- kernel/events/callchain.c | 9 ++++++++- kernel/events/core.c | 30 ++++++++++++++++++++++++++++-- kernel/events/internal.h | 3 ++- kernel/trace/trace_event_perf.c | 2 +- kernel/trace/trace_kprobe.c | 6 ++++-- kernel/trace/trace_syscalls.c | 4 ++-- kernel/trace/trace_uprobe.c | 2 +- 11 files changed, 60 insertions(+), 14 deletions(-) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index af961d6f7ab1..642928cf57b4 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -306,9 +306,10 @@ extern void *perf_trace_buf_prepare(int size, unsigned short type, static inline void perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr, - u64 count, struct pt_regs *regs, void *head) + u64 count, struct pt_regs *regs, void *head, + struct task_struct *task) { - perf_tp_event(addr, count, raw_data, size, regs, head, rctx); + perf_tp_event(addr, count, raw_data, size, regs, head, rctx, task); } #endif diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 76c5c8b724a7..7602ccb3f40e 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1272,7 +1272,8 @@ static inline bool perf_paranoid_kernel(void) extern void perf_event_init(void); extern void perf_tp_event(u64 addr, u64 count, void *record, int entry_size, struct pt_regs *regs, - struct hlist_head *head, int rctx); + struct hlist_head *head, int rctx, + struct task_struct *task); extern void perf_bp_event(struct perf_event *event, void *data); #ifndef perf_misc_flags diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h index ea7a2035456d..5a8671e8a67f 100644 --- a/include/trace/events/sched.h +++ b/include/trace/events/sched.h @@ -73,6 +73,9 @@ DECLARE_EVENT_CLASS(sched_wakeup_template, __entry->prio = p->prio; __entry->success = success; __entry->target_cpu = task_cpu(p); + ) + TP_perf_assign( + __perf_task(p); ), TP_printk("comm=%s pid=%d prio=%d success=%d target_cpu=%03d", @@ -325,6 +328,7 @@ DECLARE_EVENT_CLASS(sched_stat_template, ) TP_perf_assign( __perf_count(delay); + __perf_task(tsk); ), TP_printk("comm=%s pid=%d delay=%Lu [ns]", diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index c6bc2faaf261..a763888a36f9 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -712,6 +712,9 @@ __attribute__((section("_ftrace_events"))) *__event_##call = &event_##call #undef __perf_count #define __perf_count(c) __count = (c) +#undef __perf_task +#define __perf_task(t) __task = (t) + #undef TP_perf_assign #define TP_perf_assign(args...) args @@ -725,6 +728,7 @@ perf_trace_##call(void *__data, proto) \ struct ftrace_raw_##call *entry; \ struct pt_regs __regs; \ u64 __addr = 0, __count = 1; \ + struct task_struct *__task = NULL; \ struct hlist_head *head; \ int __entry_size; \ int __data_size; \ @@ -752,7 +756,7 @@ perf_trace_##call(void *__data, proto) \ \ head = this_cpu_ptr(event_call->perf_events); \ perf_trace_buf_submit(entry, __entry_size, rctx, __addr, \ - __count, &__regs, head); \ + __count, &__regs, head, __task); \ } /* diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c index 6581a040f399..98d4597f43d6 100644 --- a/kernel/events/callchain.c +++ b/kernel/events/callchain.c @@ -153,7 +153,8 @@ put_callchain_entry(int rctx) put_recursion_context(__get_cpu_var(callchain_recursion), rctx); } -struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) +struct perf_callchain_entry * +perf_callchain(struct perf_event *event, struct pt_regs *regs) { int rctx; struct perf_callchain_entry *entry; @@ -178,6 +179,12 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) } if (regs) { + /* + * Disallow cross-task user callchains. + */ + if (event->ctx->task && event->ctx->task != current) + goto exit_put; + perf_callchain_store(entry, PERF_CONTEXT_USER); perf_callchain_user(entry, regs); } diff --git a/kernel/events/core.c b/kernel/events/core.c index f1cf0edeb39a..b7935fcec7d9 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4039,7 +4039,7 @@ void perf_prepare_sample(struct perf_event_header *header, if (sample_type & PERF_SAMPLE_CALLCHAIN) { int size = 1; - data->callchain = perf_callchain(regs); + data->callchain = perf_callchain(event, regs); if (data->callchain) size += data->callchain->nr; @@ -5209,7 +5209,8 @@ static int perf_tp_event_match(struct perf_event *event, } void perf_tp_event(u64 addr, u64 count, void *record, int entry_size, - struct pt_regs *regs, struct hlist_head *head, int rctx) + struct pt_regs *regs, struct hlist_head *head, int rctx, + struct task_struct *task) { struct perf_sample_data data; struct perf_event *event; @@ -5228,6 +5229,31 @@ void perf_tp_event(u64 addr, u64 count, void *record, int entry_size, perf_swevent_event(event, count, &data, regs); } + /* + * If we got specified a target task, also iterate its context and + * deliver this event there too. + */ + if (task && task != current) { + struct perf_event_context *ctx; + struct trace_entry *entry = record; + + rcu_read_lock(); + ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]); + if (!ctx) + goto unlock; + + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { + if (event->attr.type != PERF_TYPE_TRACEPOINT) + continue; + if (event->attr.config != entry->type) + continue; + if (perf_tp_event_match(event, &data, regs)) + perf_swevent_event(event, count, &data, regs); + } +unlock: + rcu_read_unlock(); + } + perf_swevent_put_recursion_context(rctx); } EXPORT_SYMBOL_GPL(perf_tp_event); diff --git a/kernel/events/internal.h b/kernel/events/internal.h index b0b107f90afc..a096c19f2c2a 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -101,7 +101,8 @@ __output_copy(struct perf_output_handle *handle, } /* Callchain handling */ -extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs); +extern struct perf_callchain_entry * +perf_callchain(struct perf_event *event, struct pt_regs *regs); extern int get_callchain_buffers(void); extern void put_callchain_buffers(void); diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c index fee3752ae8f6..8a6d2ee2086c 100644 --- a/kernel/trace/trace_event_perf.c +++ b/kernel/trace/trace_event_perf.c @@ -281,7 +281,7 @@ perf_ftrace_function_call(unsigned long ip, unsigned long parent_ip) head = this_cpu_ptr(event_function.perf_events); perf_trace_buf_submit(entry, ENTRY_SIZE, rctx, 0, - 1, ®s, head); + 1, ®s, head, NULL); #undef ENTRY_SIZE } diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index b31d3d5699fe..1a2117043bb1 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1002,7 +1002,8 @@ static __kprobes void kprobe_perf_func(struct kprobe *kp, store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize); head = this_cpu_ptr(call->perf_events); - perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head); + perf_trace_buf_submit(entry, size, rctx, + entry->ip, 1, regs, head, NULL); } /* Kretprobe profile handler */ @@ -1033,7 +1034,8 @@ static __kprobes void kretprobe_perf_func(struct kretprobe_instance *ri, store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize); head = this_cpu_ptr(call->perf_events); - perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1, regs, head); + perf_trace_buf_submit(entry, size, rctx, + entry->ret_ip, 1, regs, head, NULL); } #endif /* CONFIG_PERF_EVENTS */ diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index 96fc73369099..60e4d7875672 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -532,7 +532,7 @@ static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id) (unsigned long *)&rec->args); head = this_cpu_ptr(sys_data->enter_event->perf_events); - perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head); + perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head, NULL); } int perf_sysenter_enable(struct ftrace_event_call *call) @@ -608,7 +608,7 @@ static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret) rec->ret = syscall_get_return_value(current, regs); head = this_cpu_ptr(sys_data->exit_event->perf_events); - perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head); + perf_trace_buf_submit(rec, size, rctx, 0, 1, regs, head, NULL); } int perf_sysexit_enable(struct ftrace_event_call *call) diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c index 2b36ac68549e..03003cd7dd96 100644 --- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -670,7 +670,7 @@ static void uprobe_perf_func(struct trace_uprobe *tu, struct pt_regs *regs) call_fetch(&tu->args[i].fetch, regs, data + tu->args[i].offset); head = this_cpu_ptr(call->perf_events); - perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head); + perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head, NULL); out: preempt_enable(); From a7ea3bbf5d58f4df2265d312f91d5769eabc8144 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 27 Jul 2012 14:48:09 -0400 Subject: [PATCH 0078/1098] time/jiffies: Allow CLOCK_TICK_RATE to be undefined CLOCK_TICK_RATE is a legacy constant that defines the timer device's granularity. On hardware with particularly coarse granularity, this constant is used to reduce accumulated time error when using jiffies as a clocksource, by calculating the hardware's actual tick length rather then just assuming it is 1sec/HZ. However, for the most part this is unnecessary, as most modern systems don't use jiffies for their clocksource, and their tick device is sufficiently fine grained to avoid major error. Thus, this patch allows an architecture to not define CLOCK_TICK_RATE, in which case ACTHZ defaults to (HZ << 8). Signed-off-by: Catalin Marinas Acked-by: Arnd Bergmann Cc: Richard Cochran Cc: Prarit Bhargava Cc: Andrew Morton [ Commit log & intention tweaks ] Signed-off-by: John Stultz Link: http://lkml.kernel.org/r/1343414893-45779-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar --- include/linux/jiffies.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 265e2c3cbd1c..7d24466fb80b 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -39,9 +39,6 @@ # error Invalid value of HZ. #endif -/* LATCH is used in the interval timer and ftape setup. */ -#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ - /* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can * improve accuracy by shifting LSH bits, hence calculating: * (NOM << LSH) / DEN @@ -54,8 +51,15 @@ #define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \ + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN)) +#ifdef CLOCK_TICK_RATE +/* LATCH is used in the interval timer and ftape setup. */ +# define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ + /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */ -#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8)) +# define ACTHZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8)) +#else +# define ACTHZ (HZ << 8) +#endif /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */ #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8)) From 02ab20ae38337b99b5c29c81090f594b8fd61283 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 27 Jul 2012 14:48:10 -0400 Subject: [PATCH 0079/1098] time/jiffies: Rename ACTHZ to SHIFTED_HZ Ingo noted that ACTHZ is a confusing name, and requested it be renamed, so this patch renames ACTHZ to SHIFTED_HZ to better describe it. Signed-off-by: John Stultz Cc: Prarit Bhargava Link: http://lkml.kernel.org/r/1343414893-45779-3-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar --- include/linux/jiffies.h | 21 +++++++++++++-------- include/linux/timex.h | 2 +- kernel/time/jiffies.c | 2 +- kernel/time/ntp.c | 2 +- 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 7d24466fb80b..82680541576d 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -55,21 +55,26 @@ /* LATCH is used in the interval timer and ftape setup. */ # define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ -/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */ -# define ACTHZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8)) +/* + * HZ is the requested value. However the CLOCK_TICK_RATE may not allow + * for exactly HZ. So SHIFTED_HZ is high res HZ ("<< 8" is for accuracy) + */ +# define SHIFTED_HZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8)) #else -# define ACTHZ (HZ << 8) +# define SHIFTED_HZ (HZ << 8) #endif -/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */ -#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8)) +/* TICK_NSEC is the time between ticks in nsec assuming SHIFTED_HZ */ +#define TICK_NSEC (SH_DIV(1000000UL * 1000, SHIFTED_HZ, 8)) /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */ #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ) -/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and */ -/* a value TUSEC for TICK_USEC (can be set bij adjtimex) */ -#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8)) +/* + * TICK_USEC_TO_NSEC is the time between ticks in nsec assuming SHIFTED_HZ and + * a value TUSEC for TICK_USEC (can be set bij adjtimex) + */ +#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV(TUSEC * USER_HZ * 1000, SHIFTED_HZ, 8)) /* some arch's have a small-data section that can be accessed register-relative * but that can only take up to, say, 4-byte variables. jiffies being part of diff --git a/include/linux/timex.h b/include/linux/timex.h index 99bc88b1fc02..7c5ceb20e03a 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -232,7 +232,7 @@ struct timex { * estimated error = NTP dispersion. */ extern unsigned long tick_usec; /* USER_HZ period (usec) */ -extern unsigned long tick_nsec; /* ACTHZ period (nsec) */ +extern unsigned long tick_nsec; /* SHIFTED_HZ period (nsec) */ extern void ntp_init(void); extern void ntp_clear(void); diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c index a470154e0408..46da0537c10b 100644 --- a/kernel/time/jiffies.c +++ b/kernel/time/jiffies.c @@ -37,7 +37,7 @@ * requested HZ value. It is also not recommended * for "tick-less" systems. */ -#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/ACTHZ)) +#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/SHIFTED_HZ)) /* Since jiffies uses a simple NSEC_PER_JIFFY multiplier * conversion, the .shift value could be zero. However diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index b7fbadc5c973..24174b4d669b 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -28,7 +28,7 @@ DEFINE_SPINLOCK(ntp_lock); /* USER_HZ period (usecs): */ unsigned long tick_usec = TICK_USEC; -/* ACTHZ period (nsecs): */ +/* SHIFTED_HZ period (nsecs): */ unsigned long tick_nsec; static u64 tick_length; From d4e3ab384b2343c7074f713ac330f839c38c52ee Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 27 Jul 2012 14:48:11 -0400 Subject: [PATCH 0080/1098] time: Clean up stray newlines Ingo noted inconsistent newline usage between functions. This patch cleans those up. Signed-off-by: John Stultz Cc: Prarit Bhargava Link: http://lkml.kernel.org/r/1343414893-45779-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index cf364db5589f..05b37a5ec7fb 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -239,7 +239,6 @@ static void timekeeping_update(struct timekeeper *tk, bool clearntp) update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult); } - /** * timekeeping_forward_now - update clock to the current time * @@ -436,7 +435,6 @@ int do_settimeofday(const struct timespec *tv) } EXPORT_SYMBOL(do_settimeofday); - /** * timekeeping_inject_offset - Adds or subtracts from the current time. * @tv: pointer to the timespec variable containing the offset @@ -550,7 +548,6 @@ void getrawmonotonic(struct timespec *ts) } EXPORT_SYMBOL(getrawmonotonic); - /** * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres */ @@ -683,7 +680,6 @@ static void __timekeeping_inject_sleeptime(struct timekeeper *tk, update_sleep_time(timespec_add(tk->total_sleep_time, *delta)); } - /** * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values * @delta: pointer to a timespec delta value @@ -718,7 +714,6 @@ void timekeeping_inject_sleeptime(struct timespec *delta) clock_was_set(); } - /** * timekeeping_resume - Resumes the generic timekeeping subsystem. * @@ -1003,7 +998,6 @@ static void timekeeping_adjust(struct timekeeper *tk, s64 offset) } - /** * accumulate_nsecs_to_secs - Accumulates nsecs into secs * @@ -1032,7 +1026,6 @@ static inline void accumulate_nsecs_to_secs(struct timekeeper *tk) } } - /** * logarithmic_accumulation - shifted accumulation of cycles * @@ -1076,7 +1069,6 @@ static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset, return offset; } - /** * update_wall_time - Uses the current clocksource to increment the wall time * @@ -1177,7 +1169,6 @@ void getboottime(struct timespec *ts) } EXPORT_SYMBOL_GPL(getboottime); - /** * get_monotonic_boottime - Returns monotonic time since boot * @ts: pointer to the timespec to be set @@ -1358,7 +1349,6 @@ ktime_t ktime_get_monotonic_offset(void) } EXPORT_SYMBOL_GPL(ktime_get_monotonic_offset); - /** * xtime_update() - advances the timekeeping infrastructure * @ticks: number of ticks, that have elapsed since the last call. From 6d0ef903e2bda70da124c10d8ad89f2382c87991 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 27 Jul 2012 14:48:12 -0400 Subject: [PATCH 0081/1098] time: Clean up offs_real/wall_to_mono and offs_boot/total_sleep_time updates For performance reasons, we maintain ktime_t based duplicates of wall_to_monotonic (offs_real) and total_sleep_time (offs_boot). Since large problems could occur (such as the resume regression on 3.5-rc7, or the leapsecond hrtimer issue) if these value pairs were to be inconsistently updated, this patch this cleans up how we modify these value pairs to ensure we are always consistent. As a side-effect this is also more efficient as we only caulculate the duplicate values when they are changed, rather then every update_wall_time call. This also provides WARN_ONs to detect if future changes break the invariants. Signed-off-by: John Stultz Cc: Peter Zijlstra Cc: Richard Cochran Cc: Prarit Bhargava Link: http://lkml.kernel.org/r/1343414893-45779-5-git-send-email-john.stultz@linaro.org [ Cleaned up minor style issues. ] Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 90 +++++++++++++++++++++++---------------- 1 file changed, 54 insertions(+), 36 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 05b37a5ec7fb..4da65592b4d9 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -65,14 +65,14 @@ struct timekeeper { * used instead. */ struct timespec wall_to_monotonic; - /* time spent in suspend */ - struct timespec total_sleep_time; - /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */ - struct timespec raw_time; /* Offset clock monotonic -> clock realtime */ ktime_t offs_real; + /* time spent in suspend */ + struct timespec total_sleep_time; /* Offset clock monotonic -> clock boottime */ ktime_t offs_boot; + /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */ + struct timespec raw_time; /* Seqlock for all timekeeper values */ seqlock_t lock; }; @@ -117,6 +117,31 @@ static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts) tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift; } +static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm) +{ + struct timespec tmp; + + /* + * Verify consistency of: offset_real = -wall_to_monotonic + * before modifying anything + */ + set_normalized_timespec(&tmp, -tk->wall_to_monotonic.tv_sec, + -tk->wall_to_monotonic.tv_nsec); + WARN_ON_ONCE(tk->offs_real.tv64 != timespec_to_ktime(tmp).tv64); + tk->wall_to_monotonic = wtm; + set_normalized_timespec(&tmp, -wtm.tv_sec, -wtm.tv_nsec); + tk->offs_real = timespec_to_ktime(tmp); +} + +static void tk_set_sleep_time(struct timekeeper *tk, struct timespec t) +{ + /* Verify consistency before modifying */ + WARN_ON_ONCE(tk->offs_boot.tv64 != timespec_to_ktime(tk->total_sleep_time).tv64); + + tk->total_sleep_time = t; + tk->offs_boot = timespec_to_ktime(t); +} + /** * timekeeper_setup_internals - Set up internals to use clocksource clock. * @@ -217,14 +242,6 @@ static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk) return nsec + arch_gettimeoffset(); } -static void update_rt_offset(struct timekeeper *tk) -{ - struct timespec tmp, *wtm = &tk->wall_to_monotonic; - - set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec); - tk->offs_real = timespec_to_ktime(tmp); -} - /* must hold write on timekeeper.lock */ static void timekeeping_update(struct timekeeper *tk, bool clearntp) { @@ -234,7 +251,6 @@ static void timekeeping_update(struct timekeeper *tk, bool clearntp) tk->ntp_error = 0; ntp_clear(); } - update_rt_offset(tk); xt = tk_xtime(tk); update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult); } @@ -419,8 +435,8 @@ int do_settimeofday(const struct timespec *tv) ts_delta.tv_sec = tv->tv_sec - xt.tv_sec; ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec; - timekeeper.wall_to_monotonic = - timespec_sub(timekeeper.wall_to_monotonic, ts_delta); + tk_set_wall_to_mono(&timekeeper, + timespec_sub(timekeeper.wall_to_monotonic, ts_delta)); tk_set_xtime(&timekeeper, tv); @@ -454,8 +470,8 @@ int timekeeping_inject_offset(struct timespec *ts) tk_xtime_add(&timekeeper, ts); - timekeeper.wall_to_monotonic = - timespec_sub(timekeeper.wall_to_monotonic, *ts); + tk_set_wall_to_mono(&timekeeper, + timespec_sub(timekeeper.wall_to_monotonic, *ts)); timekeeping_update(&timekeeper, true); @@ -621,7 +637,7 @@ void __init timekeeping_init(void) { struct clocksource *clock; unsigned long flags; - struct timespec now, boot; + struct timespec now, boot, tmp; read_persistent_clock(&now); read_boot_clock(&boot); @@ -642,23 +658,19 @@ void __init timekeeping_init(void) if (boot.tv_sec == 0 && boot.tv_nsec == 0) boot = tk_xtime(&timekeeper); - set_normalized_timespec(&timekeeper.wall_to_monotonic, - -boot.tv_sec, -boot.tv_nsec); - update_rt_offset(&timekeeper); - timekeeper.total_sleep_time.tv_sec = 0; - timekeeper.total_sleep_time.tv_nsec = 0; + set_normalized_timespec(&tmp, -boot.tv_sec, -boot.tv_nsec); + tk_set_wall_to_mono(&timekeeper, tmp); + + tmp.tv_sec = 0; + tmp.tv_nsec = 0; + tk_set_sleep_time(&timekeeper, tmp); + write_sequnlock_irqrestore(&timekeeper.lock, flags); } /* time in seconds when suspend began */ static struct timespec timekeeping_suspend_time; -static void update_sleep_time(struct timespec t) -{ - timekeeper.total_sleep_time = t; - timekeeper.offs_boot = timespec_to_ktime(t); -} - /** * __timekeeping_inject_sleeptime - Internal function to add sleep interval * @delta: pointer to a timespec delta value @@ -674,10 +686,9 @@ static void __timekeeping_inject_sleeptime(struct timekeeper *tk, "sleep delta value!\n"); return; } - tk_xtime_add(tk, delta); - tk->wall_to_monotonic = timespec_sub(tk->wall_to_monotonic, *delta); - update_sleep_time(timespec_add(tk->total_sleep_time, *delta)); + tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *delta)); + tk_set_sleep_time(tk, timespec_add(tk->total_sleep_time, *delta)); } /** @@ -1018,11 +1029,18 @@ static inline void accumulate_nsecs_to_secs(struct timekeeper *tk) /* Figure out if its a leap sec and apply if needed */ leap = second_overflow(tk->xtime_sec); - tk->xtime_sec += leap; - tk->wall_to_monotonic.tv_sec -= leap; - if (leap) - clock_was_set_delayed(); + if (unlikely(leap)) { + struct timespec ts; + tk->xtime_sec += leap; + + ts.tv_sec = leap; + ts.tv_nsec = 0; + tk_set_wall_to_mono(tk, + timespec_sub(tk->wall_to_monotonic, ts)); + + clock_was_set_delayed(); + } } } From 4e250fdde9be50581c7dd5fed88c9b9960615314 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 27 Jul 2012 14:48:13 -0400 Subject: [PATCH 0082/1098] time: Remove all direct references to timekeeper Ingo noted that the numerous timekeeper.value references made the timekeeping code ugly and caused many long lines that had to be broken up. He recommended replacing timekeeper.value references with tk->value. This patch provides a local tk value for all top level time functions and sets it to &timekeeper. Then all timekeeper access is done via a tk pointer. Signed-off-by: John Stultz Cc: Prarit Bhargava Link: http://lkml.kernel.org/r/1343414893-45779-6-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 282 +++++++++++++++++++++----------------- 1 file changed, 154 insertions(+), 128 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 4da65592b4d9..2988bc819187 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -292,18 +292,19 @@ static void timekeeping_forward_now(struct timekeeper *tk) */ void getnstimeofday(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; unsigned long seq; s64 nsecs = 0; WARN_ON(timekeeping_suspended); do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - ts->tv_sec = timekeeper.xtime_sec; - ts->tv_nsec = timekeeping_get_ns(&timekeeper); + ts->tv_sec = tk->xtime_sec; + ts->tv_nsec = timekeeping_get_ns(tk); - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); timespec_add_ns(ts, nsecs); } @@ -311,19 +312,18 @@ EXPORT_SYMBOL(getnstimeofday); ktime_t ktime_get(void) { + struct timekeeper *tk = &timekeeper; unsigned int seq; s64 secs, nsecs; WARN_ON(timekeeping_suspended); do { - seq = read_seqbegin(&timekeeper.lock); - secs = timekeeper.xtime_sec + - timekeeper.wall_to_monotonic.tv_sec; - nsecs = timekeeping_get_ns(&timekeeper) + - timekeeper.wall_to_monotonic.tv_nsec; + seq = read_seqbegin(&tk->lock); + secs = tk->xtime_sec + tk->wall_to_monotonic.tv_sec; + nsecs = timekeeping_get_ns(tk) + tk->wall_to_monotonic.tv_nsec; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); /* * Use ktime_set/ktime_add_ns to create a proper ktime on * 32-bit architectures without CONFIG_KTIME_SCALAR. @@ -342,18 +342,19 @@ EXPORT_SYMBOL_GPL(ktime_get); */ void ktime_get_ts(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; struct timespec tomono; unsigned int seq; WARN_ON(timekeeping_suspended); do { - seq = read_seqbegin(&timekeeper.lock); - ts->tv_sec = timekeeper.xtime_sec; - ts->tv_nsec = timekeeping_get_ns(&timekeeper); - tomono = timekeeper.wall_to_monotonic; + seq = read_seqbegin(&tk->lock); + ts->tv_sec = tk->xtime_sec; + ts->tv_nsec = timekeeping_get_ns(tk); + tomono = tk->wall_to_monotonic; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec, ts->tv_nsec + tomono.tv_nsec); @@ -373,22 +374,23 @@ EXPORT_SYMBOL_GPL(ktime_get_ts); */ void getnstime_raw_and_real(struct timespec *ts_raw, struct timespec *ts_real) { + struct timekeeper *tk = &timekeeper; unsigned long seq; s64 nsecs_raw, nsecs_real; WARN_ON_ONCE(timekeeping_suspended); do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - *ts_raw = timekeeper.raw_time; - ts_real->tv_sec = timekeeper.xtime_sec; + *ts_raw = tk->raw_time; + ts_real->tv_sec = tk->xtime_sec; ts_real->tv_nsec = 0; - nsecs_raw = timekeeping_get_ns_raw(&timekeeper); - nsecs_real = timekeeping_get_ns(&timekeeper); + nsecs_raw = timekeeping_get_ns_raw(tk); + nsecs_real = timekeeping_get_ns(tk); - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); timespec_add_ns(ts_raw, nsecs_raw); timespec_add_ns(ts_real, nsecs_real); @@ -421,28 +423,28 @@ EXPORT_SYMBOL(do_gettimeofday); */ int do_settimeofday(const struct timespec *tv) { + struct timekeeper *tk = &timekeeper; struct timespec ts_delta, xt; unsigned long flags; if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); - timekeeping_forward_now(&timekeeper); + timekeeping_forward_now(tk); - xt = tk_xtime(&timekeeper); + xt = tk_xtime(tk); ts_delta.tv_sec = tv->tv_sec - xt.tv_sec; ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec; - tk_set_wall_to_mono(&timekeeper, - timespec_sub(timekeeper.wall_to_monotonic, ts_delta)); + tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, ts_delta)); - tk_set_xtime(&timekeeper, tv); + tk_set_xtime(tk, tv); - timekeeping_update(&timekeeper, true); + timekeeping_update(tk, true); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); /* signal hrtimers about time change */ clock_was_set(); @@ -459,23 +461,23 @@ EXPORT_SYMBOL(do_settimeofday); */ int timekeeping_inject_offset(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; unsigned long flags; if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return -EINVAL; - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); - timekeeping_forward_now(&timekeeper); + timekeeping_forward_now(tk); - tk_xtime_add(&timekeeper, ts); - tk_set_wall_to_mono(&timekeeper, - timespec_sub(timekeeper.wall_to_monotonic, *ts)); + tk_xtime_add(tk, ts); + tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts)); - timekeeping_update(&timekeeper, true); + timekeeping_update(tk, true); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); /* signal hrtimers about time change */ clock_was_set(); @@ -491,23 +493,24 @@ EXPORT_SYMBOL(timekeeping_inject_offset); */ static int change_clocksource(void *data) { + struct timekeeper *tk = &timekeeper; struct clocksource *new, *old; unsigned long flags; new = (struct clocksource *) data; - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); - timekeeping_forward_now(&timekeeper); + timekeeping_forward_now(tk); if (!new->enable || new->enable(new) == 0) { - old = timekeeper.clock; - tk_setup_internals(&timekeeper, new); + old = tk->clock; + tk_setup_internals(tk, new); if (old->disable) old->disable(old); } - timekeeping_update(&timekeeper, true); + timekeeping_update(tk, true); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); return 0; } @@ -521,7 +524,9 @@ static int change_clocksource(void *data) */ void timekeeping_notify(struct clocksource *clock) { - if (timekeeper.clock == clock) + struct timekeeper *tk = &timekeeper; + + if (tk->clock == clock) return; stop_machine(change_clocksource, clock, NULL); tick_clock_notify(); @@ -550,15 +555,16 @@ EXPORT_SYMBOL_GPL(ktime_get_real); */ void getrawmonotonic(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; unsigned long seq; s64 nsecs; do { - seq = read_seqbegin(&timekeeper.lock); - nsecs = timekeeping_get_ns_raw(&timekeeper); - *ts = timekeeper.raw_time; + seq = read_seqbegin(&tk->lock); + nsecs = timekeeping_get_ns_raw(tk); + *ts = tk->raw_time; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); timespec_add_ns(ts, nsecs); } @@ -569,15 +575,16 @@ EXPORT_SYMBOL(getrawmonotonic); */ int timekeeping_valid_for_hres(void) { + struct timekeeper *tk = &timekeeper; unsigned long seq; int ret; do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - ret = timekeeper.clock->flags & CLOCK_SOURCE_VALID_FOR_HRES; + ret = tk->clock->flags & CLOCK_SOURCE_VALID_FOR_HRES; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); return ret; } @@ -587,15 +594,16 @@ int timekeeping_valid_for_hres(void) */ u64 timekeeping_max_deferment(void) { + struct timekeeper *tk = &timekeeper; unsigned long seq; u64 ret; do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - ret = timekeeper.clock->max_idle_ns; + ret = tk->clock->max_idle_ns; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); return ret; } @@ -635,6 +643,7 @@ void __attribute__((weak)) read_boot_clock(struct timespec *ts) */ void __init timekeeping_init(void) { + struct timekeeper *tk = &timekeeper; struct clocksource *clock; unsigned long flags; struct timespec now, boot, tmp; @@ -642,30 +651,30 @@ void __init timekeeping_init(void) read_persistent_clock(&now); read_boot_clock(&boot); - seqlock_init(&timekeeper.lock); + seqlock_init(&tk->lock); ntp_init(); - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); clock = clocksource_default_clock(); if (clock->enable) clock->enable(clock); - tk_setup_internals(&timekeeper, clock); + tk_setup_internals(tk, clock); - tk_set_xtime(&timekeeper, &now); - timekeeper.raw_time.tv_sec = 0; - timekeeper.raw_time.tv_nsec = 0; + tk_set_xtime(tk, &now); + tk->raw_time.tv_sec = 0; + tk->raw_time.tv_nsec = 0; if (boot.tv_sec == 0 && boot.tv_nsec == 0) - boot = tk_xtime(&timekeeper); + boot = tk_xtime(tk); set_normalized_timespec(&tmp, -boot.tv_sec, -boot.tv_nsec); - tk_set_wall_to_mono(&timekeeper, tmp); + tk_set_wall_to_mono(tk, tmp); tmp.tv_sec = 0; tmp.tv_nsec = 0; - tk_set_sleep_time(&timekeeper, tmp); + tk_set_sleep_time(tk, tmp); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); } /* time in seconds when suspend began */ @@ -703,6 +712,7 @@ static void __timekeeping_inject_sleeptime(struct timekeeper *tk, */ void timekeeping_inject_sleeptime(struct timespec *delta) { + struct timekeeper *tk = &timekeeper; unsigned long flags; struct timespec ts; @@ -711,15 +721,15 @@ void timekeeping_inject_sleeptime(struct timespec *delta) if (!(ts.tv_sec == 0 && ts.tv_nsec == 0)) return; - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); - timekeeping_forward_now(&timekeeper); + timekeeping_forward_now(tk); - __timekeeping_inject_sleeptime(&timekeeper, delta); + __timekeeping_inject_sleeptime(tk, delta); - timekeeping_update(&timekeeper, true); + timekeeping_update(tk, true); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); /* signal hrtimers about time change */ clock_was_set(); @@ -734,6 +744,7 @@ void timekeeping_inject_sleeptime(struct timespec *delta) */ static void timekeeping_resume(void) { + struct timekeeper *tk = &timekeeper; unsigned long flags; struct timespec ts; @@ -741,18 +752,18 @@ static void timekeeping_resume(void) clocksource_resume(); - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) { ts = timespec_sub(ts, timekeeping_suspend_time); - __timekeeping_inject_sleeptime(&timekeeper, &ts); + __timekeeping_inject_sleeptime(tk, &ts); } /* re-base the last cycle value */ - timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock); - timekeeper.ntp_error = 0; + tk->clock->cycle_last = tk->clock->read(tk->clock); + tk->ntp_error = 0; timekeeping_suspended = 0; - timekeeping_update(&timekeeper, false); - write_sequnlock_irqrestore(&timekeeper.lock, flags); + timekeeping_update(tk, false); + write_sequnlock_irqrestore(&tk->lock, flags); touch_softlockup_watchdog(); @@ -764,14 +775,15 @@ static void timekeeping_resume(void) static int timekeeping_suspend(void) { + struct timekeeper *tk = &timekeeper; unsigned long flags; struct timespec delta, delta_delta; static struct timespec old_delta; read_persistent_clock(&timekeeping_suspend_time); - write_seqlock_irqsave(&timekeeper.lock, flags); - timekeeping_forward_now(&timekeeper); + write_seqlock_irqsave(&tk->lock, flags); + timekeeping_forward_now(tk); timekeeping_suspended = 1; /* @@ -780,7 +792,7 @@ static int timekeeping_suspend(void) * try to compensate so the difference in system time * and persistent_clock time stays close to constant. */ - delta = timespec_sub(tk_xtime(&timekeeper), timekeeping_suspend_time); + delta = timespec_sub(tk_xtime(tk), timekeeping_suspend_time); delta_delta = timespec_sub(delta, old_delta); if (abs(delta_delta.tv_sec) >= 2) { /* @@ -793,7 +805,7 @@ static int timekeeping_suspend(void) timekeeping_suspend_time = timespec_add(timekeeping_suspend_time, delta_delta); } - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL); clocksource_suspend(); @@ -904,7 +916,7 @@ static void timekeeping_adjust(struct timekeeper *tk, s64 offset) * the error. This causes the likely below to be unlikely. * * The proper fix is to avoid rounding up by using - * the high precision timekeeper.xtime_nsec instead of + * the high precision tk->xtime_nsec instead of * xtime.tv_nsec everywhere. Fixing this will take some * time. */ @@ -1094,21 +1106,22 @@ static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset, static void update_wall_time(void) { struct clocksource *clock; + struct timekeeper *tk = &timekeeper; cycle_t offset; int shift = 0, maxshift; unsigned long flags; s64 remainder; - write_seqlock_irqsave(&timekeeper.lock, flags); + write_seqlock_irqsave(&tk->lock, flags); /* Make sure we're fully resumed: */ if (unlikely(timekeeping_suspended)) goto out; - clock = timekeeper.clock; + clock = tk->clock; #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET - offset = timekeeper.cycle_interval; + offset = tk->cycle_interval; #else offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #endif @@ -1121,19 +1134,19 @@ static void update_wall_time(void) * chunk in one go, and then try to consume the next smaller * doubled multiple. */ - shift = ilog2(offset) - ilog2(timekeeper.cycle_interval); + shift = ilog2(offset) - ilog2(tk->cycle_interval); shift = max(0, shift); /* Bound shift to one less than what overflows tick_length */ maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1; shift = min(shift, maxshift); - while (offset >= timekeeper.cycle_interval) { - offset = logarithmic_accumulation(&timekeeper, offset, shift); - if(offset < timekeeper.cycle_interval<= tk->cycle_interval) { + offset = logarithmic_accumulation(tk, offset, shift); + if (offset < tk->cycle_interval<xtime_nsec & ((1 << tk->shift) - 1); + tk->xtime_nsec -= remainder; + tk->xtime_nsec += 1 << tk->shift; + tk->ntp_error += remainder << tk->ntp_error_shift; /* * Finally, make sure that after the rounding * xtime_nsec isn't larger than NSEC_PER_SEC */ - accumulate_nsecs_to_secs(&timekeeper); + accumulate_nsecs_to_secs(tk); - timekeeping_update(&timekeeper, false); + timekeeping_update(tk, false); out: - write_sequnlock_irqrestore(&timekeeper.lock, flags); + write_sequnlock_irqrestore(&tk->lock, flags); } @@ -1176,11 +1189,12 @@ out: */ void getboottime(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; struct timespec boottime = { - .tv_sec = timekeeper.wall_to_monotonic.tv_sec + - timekeeper.total_sleep_time.tv_sec, - .tv_nsec = timekeeper.wall_to_monotonic.tv_nsec + - timekeeper.total_sleep_time.tv_nsec + .tv_sec = tk->wall_to_monotonic.tv_sec + + tk->total_sleep_time.tv_sec, + .tv_nsec = tk->wall_to_monotonic.tv_nsec + + tk->total_sleep_time.tv_nsec }; set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec); @@ -1198,19 +1212,20 @@ EXPORT_SYMBOL_GPL(getboottime); */ void get_monotonic_boottime(struct timespec *ts) { + struct timekeeper *tk = &timekeeper; struct timespec tomono, sleep; unsigned int seq; WARN_ON(timekeeping_suspended); do { - seq = read_seqbegin(&timekeeper.lock); - ts->tv_sec = timekeeper.xtime_sec; - ts->tv_nsec = timekeeping_get_ns(&timekeeper); - tomono = timekeeper.wall_to_monotonic; - sleep = timekeeper.total_sleep_time; + seq = read_seqbegin(&tk->lock); + ts->tv_sec = tk->xtime_sec; + ts->tv_nsec = timekeeping_get_ns(tk); + tomono = tk->wall_to_monotonic; + sleep = tk->total_sleep_time; - } while (read_seqretry(&timekeeper.lock, seq)); + } while (read_seqretry(&tk->lock, seq)); set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec, ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec); @@ -1240,31 +1255,38 @@ EXPORT_SYMBOL_GPL(ktime_get_boottime); */ void monotonic_to_bootbased(struct timespec *ts) { - *ts = timespec_add(*ts, timekeeper.total_sleep_time); + struct timekeeper *tk = &timekeeper; + + *ts = timespec_add(*ts, tk->total_sleep_time); } EXPORT_SYMBOL_GPL(monotonic_to_bootbased); unsigned long get_seconds(void) { - return timekeeper.xtime_sec; + struct timekeeper *tk = &timekeeper; + + return tk->xtime_sec; } EXPORT_SYMBOL(get_seconds); struct timespec __current_kernel_time(void) { - return tk_xtime(&timekeeper); + struct timekeeper *tk = &timekeeper; + + return tk_xtime(tk); } struct timespec current_kernel_time(void) { + struct timekeeper *tk = &timekeeper; struct timespec now; unsigned long seq; do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - now = tk_xtime(&timekeeper); - } while (read_seqretry(&timekeeper.lock, seq)); + now = tk_xtime(tk); + } while (read_seqretry(&tk->lock, seq)); return now; } @@ -1272,15 +1294,16 @@ EXPORT_SYMBOL(current_kernel_time); struct timespec get_monotonic_coarse(void) { + struct timekeeper *tk = &timekeeper; struct timespec now, mono; unsigned long seq; do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - now = tk_xtime(&timekeeper); - mono = timekeeper.wall_to_monotonic; - } while (read_seqretry(&timekeeper.lock, seq)); + now = tk_xtime(tk); + mono = tk->wall_to_monotonic; + } while (read_seqretry(&tk->lock, seq)); set_normalized_timespec(&now, now.tv_sec + mono.tv_sec, now.tv_nsec + mono.tv_nsec); @@ -1309,14 +1332,15 @@ void do_timer(unsigned long ticks) void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim, struct timespec *wtom, struct timespec *sleep) { + struct timekeeper *tk = &timekeeper; unsigned long seq; do { - seq = read_seqbegin(&timekeeper.lock); - *xtim = tk_xtime(&timekeeper); - *wtom = timekeeper.wall_to_monotonic; - *sleep = timekeeper.total_sleep_time; - } while (read_seqretry(&timekeeper.lock, seq)); + seq = read_seqbegin(&tk->lock); + *xtim = tk_xtime(tk); + *wtom = tk->wall_to_monotonic; + *sleep = tk->total_sleep_time; + } while (read_seqretry(&tk->lock, seq)); } #ifdef CONFIG_HIGH_RES_TIMERS @@ -1330,19 +1354,20 @@ void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim, */ ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot) { + struct timekeeper *tk = &timekeeper; ktime_t now; unsigned int seq; u64 secs, nsecs; do { - seq = read_seqbegin(&timekeeper.lock); + seq = read_seqbegin(&tk->lock); - secs = timekeeper.xtime_sec; - nsecs = timekeeping_get_ns(&timekeeper); + secs = tk->xtime_sec; + nsecs = timekeeping_get_ns(tk); - *offs_real = timekeeper.offs_real; - *offs_boot = timekeeper.offs_boot; - } while (read_seqretry(&timekeeper.lock, seq)); + *offs_real = tk->offs_real; + *offs_boot = tk->offs_boot; + } while (read_seqretry(&tk->lock, seq)); now = ktime_add_ns(ktime_set(secs, 0), nsecs); now = ktime_sub(now, *offs_real); @@ -1355,13 +1380,14 @@ ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot) */ ktime_t ktime_get_monotonic_offset(void) { + struct timekeeper *tk = &timekeeper; unsigned long seq; struct timespec wtom; do { - seq = read_seqbegin(&timekeeper.lock); - wtom = timekeeper.wall_to_monotonic; - } while (read_seqretry(&timekeeper.lock, seq)); + seq = read_seqbegin(&tk->lock); + wtom = tk->wall_to_monotonic; + } while (read_seqretry(&tk->lock, seq)); return timespec_to_ktime(wtom); } From 58f598ff0bb0c030e026a0738450c6a46248f6a8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 15:45:41 +0100 Subject: [PATCH 0083/1098] ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements If codec->control_data is not populated SoC Core assumes we want to use regmap, which fails catastrophically, as we don't have one: Unable to handle kernel NULL pointer dereference at virtual address 00000080 pgd = c0004000 [00000080] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 Not tainted (3.5.0-rc6-00884-g0b2419e-dirty #130) PC is at regmap_read+0x10/0x5c LR is at hw_read+0x80/0x90 pc : [] lr : [] psr: 60000013 Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- sound/soc/codecs/ab8500-codec.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c index 3c795921c5f6..23b40186f9b8 100644 --- a/sound/soc/codecs/ab8500-codec.c +++ b/sound/soc/codecs/ab8500-codec.c @@ -2406,6 +2406,10 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec) /* Setup AB8500 according to board-settings */ pdata = (struct ab8500_platform_data *)dev_get_platdata(dev->parent); + + /* Inform SoC Core that we have our own I/O arrangements. */ + codec->control_data = (void *)true; + status = ab8500_audio_setup_mics(codec, &pdata->codec->amics); if (status < 0) { pr_err("%s: Failed to setup mics (%d)!\n", __func__, status); From eef69ac7c9672049069a0bb88dae756fdec4de07 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 27 Jul 2012 19:18:42 +0800 Subject: [PATCH 0084/1098] ASoC: sgtl5000: enable VAG_POWER for LINE_IN LINE_IN also needs VAG_POWER on or we may hear noise when directly route LINE_IN to Headphone Mux. Tested on imx28evk. Signed-off-by: Dong Aisheng Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 5c54b6f4623a..df2f99d1d428 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -239,6 +239,7 @@ static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ {"LO", NULL, "DAC"}, /* dac --> line_out */ + {"LINE_IN", NULL, "VAG_POWER"}, {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ From d0e3cce9144eb8bff0852531aadbe221addaa2d5 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Jul 2012 14:42:27 +0200 Subject: [PATCH 0085/1098] ASoC: AC97 doesn't use regmap by default Since commit 38cbf9598feba97de9f9b43efa9153fd7c1a2ec9 ("ASoC: core: Try to use regmap if the driver doesn't set up any I/O") any ASoC codec which doesn't set codec::control_data is assumed to use regmap. That doesn't work with AC97 so this workaround sets the codec::control_data member to a random value to restore proper behaviour. Tested with WM9712. Signed-off-by: Manuel Lauss Signed-off-by: Mark Brown --- sound/soc/codecs/ad1980.c | 1 + sound/soc/codecs/stac9766.c | 1 + sound/soc/codecs/wm9712.c | 1 + sound/soc/codecs/wm9713.c | 1 + 4 files changed, 4 insertions(+) diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index 8c39dddd7d00..11b1b714b8b5 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -186,6 +186,7 @@ static int ad1980_soc_probe(struct snd_soc_codec *codec) printk(KERN_INFO "AD1980 SoC Audio Codec\n"); + codec->control_data = codec; /* we don't use regmap! */ ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); if (ret < 0) { printk(KERN_ERR "ad1980: failed to register AC97 codec\n"); diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c index 982e437799a8..33c0f3d39c87 100644 --- a/sound/soc/codecs/stac9766.c +++ b/sound/soc/codecs/stac9766.c @@ -340,6 +340,7 @@ static int stac9766_codec_probe(struct snd_soc_codec *codec) printk(KERN_INFO "STAC9766 SoC Audio Codec %s\n", STAC9766_VERSION); + codec->control_data = codec; /* we don't use regmap! */ ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); if (ret < 0) goto codec_err; diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 099e6ec32125..f16fb361a4eb 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -619,6 +619,7 @@ static int wm9712_soc_probe(struct snd_soc_codec *codec) { int ret = 0; + codec->control_data = codec; /* we don't use regmap! */ ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); if (ret < 0) { printk(KERN_ERR "wm9712: failed to register AC97 codec\n"); diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 3eb19fb71d17..d0b8a3287a85 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -1196,6 +1196,7 @@ static int wm9713_soc_probe(struct snd_soc_codec *codec) if (wm9713 == NULL) return -ENOMEM; snd_soc_codec_set_drvdata(codec, wm9713); + codec->control_data = wm9713; /* we don't use regmap! */ ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); if (ret < 0) From 9d40e5582c9c4cfb6977ba2a0ca9c2ed82c56f21 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Jul 2012 18:24:19 +0100 Subject: [PATCH 0086/1098] ASoC: wm8962: Allow VMID time to fully ramp Required for reliable power up from cold. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8962.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index eaf65863ec21..aa9ce9dd7d8a 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2501,6 +2501,9 @@ static int wm8962_set_bias_level(struct snd_soc_codec *codec, /* VMID 2*250k */ snd_soc_update_bits(codec, WM8962_PWR_MGMT_1, WM8962_VMID_SEL_MASK, 0x100); + + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) + msleep(100); break; case SND_SOC_BIAS_OFF: From 2d9957cce674308f744f37f68b6bc3261bfdbbf4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 20:54:52 +0200 Subject: [PATCH 0087/1098] mac80211: clear timer bits when disconnecting There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 2 ++ net/mac80211/mlme.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 6fac18c0423f..d60b3d362e00 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -634,6 +634,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) local->fif_other_bss--; atomic_dec(&local->iff_allmultis); ieee80211_configure_filter(local); + + sdata->u.mesh.timers_running = 0; } static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index cef0c9e79aba..a4a5acdbaa4d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1430,6 +1430,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, del_timer_sync(&sdata->u.mgd.bcn_mon_timer); del_timer_sync(&sdata->u.mgd.timer); del_timer_sync(&sdata->u.mgd.chswitch_timer); + + sdata->u.mgd.timers_running = 0; } void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, From dd4c9260e7f23f2e951cbfb2726e468c6d30306c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 21:03:21 +0200 Subject: [PATCH 0088/1098] mac80211: cancel mesh path timer The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index d60b3d362e00..85572353a7e3 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -622,6 +622,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); + del_timer_sync(&sdata->u.mesh.mesh_path_timer); /* * If the timer fired while we waited for it, it will have * requeued the work. Now the work will be running again From 4b6486659a7defef82ea51b276024b3aa357fefc Mon Sep 17 00:00:00 2001 From: Bruce Rogers Date: Fri, 20 Jul 2012 10:44:24 -0600 Subject: [PATCH 0089/1098] KVM: x86: apply kvmclock offset to guest wall clock time When a guest migrates to a new host, the system time difference from the previous host is used in the updates to the kvmclock system time visible to the guest, resulting in a continuation of correct kvmclock based guest timekeeping. The wall clock component of the kvmclock provided time is currently not updated with this same time offset. Since the Linux guest caches the wall clock based time, this discrepency is not noticed until the guest is rebooted. After reboot the guest's time calculations are off. This patch adjusts the wall clock by the kvmclock_offset, resulting in correct guest time after a reboot. Cc: Zachary Amsden Signed-off-by: Bruce Rogers Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 59b59508ff07..42bce48f6928 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -925,6 +925,10 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) */ getboottime(&boot); + if (kvm->arch.kvmclock_offset) { + struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset); + boot = timespec_sub(boot, ts); + } wc.sec = boot.tv_sec; wc.nsec = boot.tv_nsec; wc.version = version; From 30f31c0a492d0c1cd64af631476697f38d6a79d4 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 1 Aug 2012 14:48:58 +0200 Subject: [PATCH 0090/1098] perf test: Fix parse events automated tests Parse events tests got broken after following commit: perf tools: Fix trace events storms due to weight demux commit 0983cc0dbca45250cbb5984bec7c303ac265b8e5 Author: Frederic Weisbecker that added PERF_SAMPLE_PERIOD sample type for tracepoints. Updating related tests. Signed-off-by: Jiri Olsa Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343825338-10618-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/parse-events-test.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c index 1b997d2b89ce..127d648cc548 100644 --- a/tools/perf/util/parse-events-test.c +++ b/tools/perf/util/parse-events-test.c @@ -13,6 +13,9 @@ do { \ } \ } while (0) +#define PERF_TP_SAMPLE_TYPE (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | \ + PERF_SAMPLE_CPU | PERF_SAMPLE_PERIOD) + static int test__checkevent_tracepoint(struct perf_evlist *evlist) { struct perf_evsel *evsel = list_entry(evlist->entries.next, @@ -21,8 +24,7 @@ static int test__checkevent_tracepoint(struct perf_evlist *evlist) TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries); TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type); TEST_ASSERT_VAL("wrong sample_type", - (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) == - evsel->attr.sample_type); + PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type); TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period); return 0; } @@ -37,8 +39,7 @@ static int test__checkevent_tracepoint_multi(struct perf_evlist *evlist) TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type); TEST_ASSERT_VAL("wrong sample_type", - (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) - == evsel->attr.sample_type); + PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type); TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period); } @@ -428,8 +429,7 @@ static int test__checkevent_list(struct perf_evlist *evlist) evsel = list_entry(evsel->node.next, struct perf_evsel, node); TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type); TEST_ASSERT_VAL("wrong sample_type", - (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) == - evsel->attr.sample_type); + PERF_TP_SAMPLE_TYPE == evsel->attr.sample_type); TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period); TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user); TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel); From 028df76726c5637c6f70a064d94452808ec74f9e Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 1 Aug 2012 14:47:57 +0200 Subject: [PATCH 0091/1098] perf symbols: Fix array sizes for binary types arrays Following commit introduced wrong array boundaries, that could lead to SIGSEGV. perf symbols: Factor DSO symtab types to generic binary types commit 44f24cb3156a1e7d2b6bb501b7f6153aed08994c Author: Jiri Olsa Fixing to use proper array size. Reported-by: Markus Trippelsdorf Signed-off-by: Jiri Olsa Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Markus Trippelsdorf Link: http://lkml.kernel.org/r/1343825277-10517-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index fdad4eeeb429..fe86612afadc 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -64,7 +64,7 @@ static enum dso_binary_type binary_type_symtab[] = { DSO_BINARY_TYPE__NOT_FOUND, }; -#define DSO_BINARY_TYPE__SYMTAB_CNT sizeof(binary_type_symtab) +#define DSO_BINARY_TYPE__SYMTAB_CNT ARRAY_SIZE(binary_type_symtab) static enum dso_binary_type binary_type_data[] = { DSO_BINARY_TYPE__BUILD_ID_CACHE, @@ -72,7 +72,7 @@ static enum dso_binary_type binary_type_data[] = { DSO_BINARY_TYPE__NOT_FOUND, }; -#define DSO_BINARY_TYPE__DATA_CNT sizeof(binary_type_data) +#define DSO_BINARY_TYPE__DATA_CNT ARRAY_SIZE(binary_type_data) int dso__name_len(const struct dso *dso) { From 0ecf4f0c02b7802de5d1251e03e6eab360f158e1 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 Jul 2012 10:50:10 +0900 Subject: [PATCH 0092/1098] perf target: Fix check on buffer size It was a mistake just replace assert to BUG_ON since its condition should be negated. Fix it. Signed-off-by: Namhyung Kim Cc: "Kirill A. Shutemov" Cc: Ingo Molnar Cc: Kirill A. Shutemov Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Ulrich Drepper Link: http://lkml.kernel.org/r/1343267410-7758-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/target.c b/tools/perf/util/target.c index 3f59c496e64c..051eaa68095e 100644 --- a/tools/perf/util/target.c +++ b/tools/perf/util/target.c @@ -110,7 +110,7 @@ int perf_target__strerror(struct perf_target *target, int errnum, int idx; const char *msg; - BUG_ON(buflen > 0); + BUG_ON(buflen == 0); if (errnum >= 0) { const char *err = strerror_r(errnum, buf, buflen); From bde09467b56c5a3cfe2a29d58edc5f7172c15184 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 1 Aug 2012 18:53:11 -0300 Subject: [PATCH 0093/1098] perf evsel: Precalculate the sample size So that we don't have to store it in the perf_session instance, because in the future perf_session instances may have multiple evlists, each with different sample_type/sizes. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-ptod86fxkpgq3h62m9refkv4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-test.c | 9 ++++----- tools/perf/util/evsel.c | 3 ++- tools/perf/util/evsel.h | 8 +------- tools/perf/util/python.c | 2 +- tools/perf/util/session.c | 14 +++++++++++++- tools/perf/util/session.h | 13 +++---------- 6 files changed, 24 insertions(+), 25 deletions(-) diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index d909eb74a0eb..2ea5fe4cc940 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -478,7 +478,6 @@ static int test__basic_mmap(void) unsigned int nr_events[nsyscalls], expected_nr_events[nsyscalls], i, j; struct perf_evsel *evsels[nsyscalls], *evsel; - int sample_size = __perf_evsel__sample_size(attr.sample_type); for (i = 0; i < nsyscalls; ++i) { char name[64]; @@ -563,7 +562,8 @@ static int test__basic_mmap(void) goto out_munmap; } - err = perf_event__parse_sample(event, attr.sample_type, sample_size, + err = perf_event__parse_sample(event, attr.sample_type, + evsels[0]->sample_size, false, &sample, false); if (err) { pr_err("Can't parse sample, err = %d\n", err); @@ -666,7 +666,7 @@ static int test__PERF_RECORD(void) found_libc_mmap = false, found_vdso_mmap = false, found_ld_mmap = false; - int err = -1, errs = 0, i, wakeups = 0, sample_size; + int err = -1, errs = 0, i, wakeups = 0; u32 cpu; int total_events = 0, nr_events[PERF_RECORD_MAX] = { 0, }; @@ -761,7 +761,6 @@ static int test__PERF_RECORD(void) * event. */ sample_type = perf_evlist__sample_type(evlist); - sample_size = __perf_evsel__sample_size(sample_type); /* * Now that all is properly set up, enable the events, they will @@ -789,7 +788,7 @@ static int test__PERF_RECORD(void) nr_events[type]++; err = perf_event__parse_sample(event, sample_type, - sample_size, true, + evsel->sample_size, true, &sample, false); if (err < 0) { if (verbose) diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index e81771364867..8feec4011356 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -20,7 +20,7 @@ #define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y)) #define GROUP_FD(group_fd, cpu) (*(int *)xyarray__entry(group_fd, cpu, 0)) -int __perf_evsel__sample_size(u64 sample_type) +static int __perf_evsel__sample_size(u64 sample_type) { u64 mask = sample_type & PERF_SAMPLE_MASK; int size = 0; @@ -53,6 +53,7 @@ void perf_evsel__init(struct perf_evsel *evsel, evsel->attr = *attr; INIT_LIST_HEAD(&evsel->node); hists__init(&evsel->hists); + evsel->sample_size = __perf_evsel__sample_size(attr->sample_type); } struct perf_evsel *perf_evsel__new(struct perf_event_attr *attr, int idx) diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 67cc5033d192..894bd77d90cc 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -65,6 +65,7 @@ struct perf_evsel { void *func; void *data; } handler; + unsigned int sample_size; bool supported; }; @@ -177,13 +178,6 @@ static inline int perf_evsel__read_scaled(struct perf_evsel *evsel, return __perf_evsel__read(evsel, ncpus, nthreads, true); } -int __perf_evsel__sample_size(u64 sample_type); - -static inline int perf_evsel__sample_size(struct perf_evsel *evsel) -{ - return __perf_evsel__sample_size(evsel->attr.sample_type); -} - void hists__init(struct hists *hists); #endif /* __PERF_EVSEL_H */ diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index e03b58a48424..b0d6f85e30f1 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -806,7 +806,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist, first = list_entry(evlist->entries.next, struct perf_evsel, node); err = perf_event__parse_sample(event, first->attr.sample_type, - perf_evsel__sample_size(first), + first->sample_size, sample_id_all, &pevent->sample, false); if (err) return PyErr_Format(PyExc_OSError, diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 8e4f0755d2aa..b8da60d1ecb5 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -16,6 +16,19 @@ #include "cpumap.h" #include "event-parse.h" +int perf_session__parse_sample(struct perf_session *session, + const union perf_event *event, + struct perf_sample *sample) +{ + struct perf_evsel *first; + first = list_entry(session->evlist->entries.next, struct perf_evsel, node); + + return perf_event__parse_sample(event, session->sample_type, + first->sample_size, + session->sample_id_all, sample, + session->header.needs_swap); +} + static int perf_session__open(struct perf_session *self, bool force) { struct stat input_stat; @@ -83,7 +96,6 @@ out_close: void perf_session__update_sample_type(struct perf_session *self) { self->sample_type = perf_evlist__sample_type(self->evlist); - self->sample_size = __perf_evsel__sample_size(self->sample_type); self->sample_id_all = perf_evlist__sample_id_all(self->evlist); self->id_hdr_size = perf_evlist__id_hdr_size(self->evlist); self->host_machine.id_hdr_size = self->id_hdr_size; diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 7c435bde6eb0..4d549e28248f 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -42,7 +42,6 @@ struct perf_session { */ struct hists hists; u64 sample_type; - int sample_size; int fd; bool fd_pipe; bool repipe; @@ -130,15 +129,9 @@ size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp); -static inline int perf_session__parse_sample(struct perf_session *session, - const union perf_event *event, - struct perf_sample *sample) -{ - return perf_event__parse_sample(event, session->sample_type, - session->sample_size, - session->sample_id_all, sample, - session->header.needs_swap); -} +int perf_session__parse_sample(struct perf_session *session, + const union perf_event *event, + struct perf_sample *sample); static inline int perf_session__synthesize_sample(struct perf_session *session, union perf_event *event, From 7f3be652c1a8866251bfba9ea8b02067328f5db9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 1 Aug 2012 19:15:52 -0300 Subject: [PATCH 0094/1098] perf session: Use perf_evlist__sample_type more extensively Removing perf_session->sample_type, as it can be obtained from the evsel/evlist. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-mnt1zwlik7sp7z6ljc9kyefg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-report.c | 5 +++-- tools/perf/builtin-test.c | 10 ++-------- tools/perf/util/session.c | 31 ++++++++++++++++++++++--------- tools/perf/util/session.h | 11 +++-------- 4 files changed, 30 insertions(+), 27 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 69b1c1185159..7c88a243b5db 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -249,8 +249,9 @@ static int process_read_event(struct perf_tool *tool, static int perf_report__setup_sample_type(struct perf_report *rep) { struct perf_session *self = rep->session; + u64 sample_type = perf_evlist__sample_type(self->evlist); - if (!self->fd_pipe && !(self->sample_type & PERF_SAMPLE_CALLCHAIN)) { + if (!self->fd_pipe && !(sample_type & PERF_SAMPLE_CALLCHAIN)) { if (sort__has_parent) { ui__error("Selected --sort parent, but no " "callchain data. Did you call " @@ -274,7 +275,7 @@ static int perf_report__setup_sample_type(struct perf_report *rep) if (sort__branch_mode == 1) { if (!self->fd_pipe && - !(self->sample_type & PERF_SAMPLE_BRANCH_STACK)) { + !(sample_type & PERF_SAMPLE_BRANCH_STACK)) { ui__error("Selected -b but no branch data. " "Did you call perf record without -b?\n"); return -1; diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 2ea5fe4cc940..e5032ed2f259 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -661,7 +661,7 @@ static int test__PERF_RECORD(void) const char *cmd = "sleep"; const char *argv[] = { cmd, "1", NULL, }; char *bname; - u64 sample_type, prev_time = 0; + u64 prev_time = 0; bool found_cmd_mmap = false, found_libc_mmap = false, found_vdso_mmap = false, @@ -756,12 +756,6 @@ static int test__PERF_RECORD(void) goto out_delete_evlist; } - /* - * We'll need these two to parse the PERF_SAMPLE_* fields in each - * event. - */ - sample_type = perf_evlist__sample_type(evlist); - /* * Now that all is properly set up, enable the events, they will * count just on workload.pid, which will start... @@ -787,7 +781,7 @@ static int test__PERF_RECORD(void) if (type < PERF_RECORD_MAX) nr_events[type]++; - err = perf_event__parse_sample(event, sample_type, + err = perf_event__parse_sample(event, evsel->attr.sample_type, evsel->sample_size, true, &sample, false); if (err < 0) { diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index b8da60d1ecb5..00e180e116e7 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -23,12 +23,20 @@ int perf_session__parse_sample(struct perf_session *session, struct perf_evsel *first; first = list_entry(session->evlist->entries.next, struct perf_evsel, node); - return perf_event__parse_sample(event, session->sample_type, + return perf_event__parse_sample(event, first->attr.sample_type, first->sample_size, session->sample_id_all, sample, session->header.needs_swap); } +int perf_session__synthesize_sample(struct perf_session *session, + union perf_event *event, + const struct perf_sample *sample) +{ + return perf_event__synthesize_sample(event, perf_evlist__sample_type(session->evlist), + sample, session->header.needs_swap); +} + static int perf_session__open(struct perf_session *self, bool force) { struct stat input_stat; @@ -95,7 +103,6 @@ out_close: void perf_session__update_sample_type(struct perf_session *self) { - self->sample_type = perf_evlist__sample_type(self->evlist); self->sample_id_all = perf_evlist__sample_id_all(self->evlist); self->id_hdr_size = perf_evlist__id_hdr_size(self->evlist); self->host_machine.id_hdr_size = self->id_hdr_size; @@ -877,16 +884,18 @@ static void perf_session__print_tstamp(struct perf_session *session, union perf_event *event, struct perf_sample *sample) { + u64 sample_type = perf_evlist__sample_type(session->evlist); + if (event->header.type != PERF_RECORD_SAMPLE && !session->sample_id_all) { fputs("-1 -1 ", stdout); return; } - if ((session->sample_type & PERF_SAMPLE_CPU)) + if ((sample_type & PERF_SAMPLE_CPU)) printf("%u ", sample->cpu); - if (session->sample_type & PERF_SAMPLE_TIME) + if (sample_type & PERF_SAMPLE_TIME) printf("%" PRIu64 " ", sample->time); } @@ -911,6 +920,8 @@ static void dump_event(struct perf_session *session, union perf_event *event, static void dump_sample(struct perf_session *session, union perf_event *event, struct perf_sample *sample) { + u64 sample_type; + if (!dump_trace) return; @@ -918,10 +929,12 @@ static void dump_sample(struct perf_session *session, union perf_event *event, event->header.misc, sample->pid, sample->tid, sample->ip, sample->period, sample->addr); - if (session->sample_type & PERF_SAMPLE_CALLCHAIN) + sample_type = perf_evlist__sample_type(session->evlist); + + if (sample_type & PERF_SAMPLE_CALLCHAIN) callchain__printf(sample); - if (session->sample_type & PERF_SAMPLE_BRANCH_STACK) + if (sample_type & PERF_SAMPLE_BRANCH_STACK) branch_stack__printf(sample); } @@ -1018,7 +1031,7 @@ static int perf_session__preprocess_sample(struct perf_session *session, union perf_event *event, struct perf_sample *sample) { if (event->header.type != PERF_RECORD_SAMPLE || - !(session->sample_type & PERF_SAMPLE_CALLCHAIN)) + !(perf_evlist__sample_type(session->evlist) & PERF_SAMPLE_CALLCHAIN)) return 0; if (!ip_callchain__valid(sample->callchain, event)) { @@ -1401,9 +1414,9 @@ int perf_session__process_events(struct perf_session *self, return err; } -bool perf_session__has_traces(struct perf_session *self, const char *msg) +bool perf_session__has_traces(struct perf_session *session, const char *msg) { - if (!(self->sample_type & PERF_SAMPLE_RAW)) { + if (!(perf_evlist__sample_type(session->evlist) & PERF_SAMPLE_RAW)) { pr_err("No trace sample to read. Did you call 'perf %s'?\n", msg); return false; } diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 4d549e28248f..c45ce4348b83 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -41,7 +41,6 @@ struct perf_session { * perf.data file. */ struct hists hists; - u64 sample_type; int fd; bool fd_pipe; bool repipe; @@ -133,13 +132,9 @@ int perf_session__parse_sample(struct perf_session *session, const union perf_event *event, struct perf_sample *sample); -static inline int perf_session__synthesize_sample(struct perf_session *session, - union perf_event *event, - const struct perf_sample *sample) -{ - return perf_event__synthesize_sample(event, session->sample_type, - sample, session->header.needs_swap); -} +int perf_session__synthesize_sample(struct perf_session *session, + union perf_event *event, + const struct perf_sample *sample); struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, unsigned int type); From 5e5624745d7e4a2c956c072ef2542872955b59c4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 1 Aug 2012 19:25:26 -0300 Subject: [PATCH 0095/1098] perf session: Use perf_evlist__sample_id_all more extensively Removing perf_session->sample_id_all, as it can be obtained from the evsel/evlist. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-ok58u1mlc5ci9b6p36r52uh1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 9 ++++----- tools/perf/util/session.h | 1 - 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 00e180e116e7..348cc11385b7 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -25,7 +25,7 @@ int perf_session__parse_sample(struct perf_session *session, return perf_event__parse_sample(event, first->attr.sample_type, first->sample_size, - session->sample_id_all, sample, + first->attr.sample_id_all, sample, session->header.needs_swap); } @@ -103,7 +103,6 @@ out_close: void perf_session__update_sample_type(struct perf_session *self) { - self->sample_id_all = perf_evlist__sample_id_all(self->evlist); self->id_hdr_size = perf_evlist__id_hdr_size(self->evlist); self->host_machine.id_hdr_size = self->id_hdr_size; machines__set_id_hdr_size(&self->machines, self->id_hdr_size); @@ -177,7 +176,7 @@ struct perf_session *perf_session__new(const char *filename, int mode, } if (tool && tool->ordering_requires_timestamps && - tool->ordered_samples && !self->sample_id_all) { + tool->ordered_samples && !perf_evlist__sample_id_all(self->evlist)) { dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n"); tool->ordered_samples = false; } @@ -887,7 +886,7 @@ static void perf_session__print_tstamp(struct perf_session *session, u64 sample_type = perf_evlist__sample_type(session->evlist); if (event->header.type != PERF_RECORD_SAMPLE && - !session->sample_id_all) { + !perf_evlist__sample_id_all(session->evlist)) { fputs("-1 -1 ", stdout); return; } @@ -1090,7 +1089,7 @@ static int perf_session__process_event(struct perf_session *session, int ret; if (session->header.needs_swap) - event_swap(event, session->sample_id_all); + event_swap(event, perf_evlist__sample_id_all(session->evlist)); if (event->header.type >= PERF_RECORD_HEADER_MAX) return -EINVAL; diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index c45ce4348b83..a2c3ce9e716d 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -44,7 +44,6 @@ struct perf_session { int fd; bool fd_pipe; bool repipe; - bool sample_id_all; u16 id_hdr_size; int cwdlen; char *cwd; From 7b56cce27123ccbf2cb82febbbc88443d719f1f8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 1 Aug 2012 19:31:00 -0300 Subject: [PATCH 0096/1098] perf session: Use perf_evlist__id_hdr_size more extensively Removing perf_session->id_hdr_size, as it can be obtained from the evsel/evlist. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-1nwc2kslu7gsfblu98xbqbll@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 2 +- tools/perf/builtin-top.c | 2 +- tools/perf/util/session.c | 13 +++++++------ tools/perf/util/session.h | 3 +-- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index f5a6452931e6..dc2b62565aa1 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -313,7 +313,7 @@ try_again: } } - perf_session__update_sample_type(session); + perf_session__set_id_hdr_size(session); } static int process_buildids(struct perf_record *rec) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 35e86c6df713..520e4256fc66 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1032,7 +1032,7 @@ static int __cmd_top(struct perf_top *top) &top->session->host_machine); perf_top__start_counters(top); top->session->evlist = top->evlist; - perf_session__update_sample_type(top->session); + perf_session__set_id_hdr_size(top->session); /* Wait for a minimal set of events before starting the snapshot */ poll(top->evlist->pollfd, top->evlist->nr_fds, 100); diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 348cc11385b7..5b8601df2392 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -101,11 +101,12 @@ out_close: return -1; } -void perf_session__update_sample_type(struct perf_session *self) +void perf_session__set_id_hdr_size(struct perf_session *session) { - self->id_hdr_size = perf_evlist__id_hdr_size(self->evlist); - self->host_machine.id_hdr_size = self->id_hdr_size; - machines__set_id_hdr_size(&self->machines, self->id_hdr_size); + u16 id_hdr_size = perf_evlist__id_hdr_size(session->evlist); + + session->host_machine.id_hdr_size = id_hdr_size; + machines__set_id_hdr_size(&session->machines, id_hdr_size); } int perf_session__create_kernel_maps(struct perf_session *self) @@ -165,7 +166,7 @@ struct perf_session *perf_session__new(const char *filename, int mode, if (mode == O_RDONLY) { if (perf_session__open(self, force) < 0) goto out_delete; - perf_session__update_sample_type(self); + perf_session__set_id_hdr_size(self); } else if (mode == O_WRONLY) { /* * In O_RDONLY mode this will be performed when reading the @@ -1054,7 +1055,7 @@ static int perf_session__process_user_event(struct perf_session *session, union case PERF_RECORD_HEADER_ATTR: err = tool->attr(event, &session->evlist); if (err == 0) - perf_session__update_sample_type(session); + perf_session__set_id_hdr_size(session); return err; case PERF_RECORD_HEADER_EVENT_TYPE: return tool->event_type(tool, event); diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index a2c3ce9e716d..e2a1a4b7b236 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -44,7 +44,6 @@ struct perf_session { int fd; bool fd_pipe; bool repipe; - u16 id_hdr_size; int cwdlen; char *cwd; struct ordered_samples ordered_samples; @@ -83,7 +82,7 @@ void perf_event__attr_swap(struct perf_event_attr *attr); int perf_session__create_kernel_maps(struct perf_session *self); -void perf_session__update_sample_type(struct perf_session *self); +void perf_session__set_id_hdr_size(struct perf_session *session); void perf_session__remove_thread(struct perf_session *self, struct thread *th); static inline From eaf4ce6c5fed6b4c55f7efcd5fc3477435cab5e9 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 1 Aug 2012 15:59:58 -0700 Subject: [PATCH 0097/1098] x86-64, kcmp: The kcmp system call can be common We already use the same system call handler for i386 and x86-64, there is absolutely no reason x32 can't use the same system call, too. Signed-off-by: H. Peter Anvin Cc: H.J. Lu Cc: Cyrill Gorcunov Cc: v3.5 Link: http://lkml.kernel.org/n/tip-vwzk3qbcr3yjyxjg2j38vgy9@git.kernel.org --- arch/x86/syscalls/syscall_64.tbl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 51171aeff0dc..29aed7ac2c02 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -318,7 +318,7 @@ 309 common getcpu sys_getcpu 310 64 process_vm_readv sys_process_vm_readv 311 64 process_vm_writev sys_process_vm_writev -312 64 kcmp sys_kcmp +312 common kcmp sys_kcmp # # x32-specific system call numbers start at 512 to avoid cache impact From aa67f6096c19bcdb1951ef88be3cf3d2118809dc Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 1 Aug 2012 16:48:03 +0300 Subject: [PATCH 0098/1098] KVM: VMX: Fix ds/es corruption on i386 with preemption Commit b2da15ac26a0c ("KVM: VMX: Optimize %ds, %es reload") broke i386 in the following scenario: vcpu_load ... vmx_save_host_state vmx_vcpu_run (ds.rpl, es.rpl cleared by hardware) interrupt push ds, es # pushes bad ds, es schedule vmx_vcpu_put vmx_load_host_state reload ds, es (with __USER_DS) pop ds, es # of other thread's stack iret # other thread runs interrupt push ds, es schedule # back in vcpu thread pop ds, es # now with rpl=0 iret ... vcpu_put resume_userspace iret # clears ds, es due to mismatched rpl (instead of resume_userspace, we might return with SYSEXIT and then take an exception; when the exception IRETs we end up with cleared ds, es) Fix by avoiding the optimization on i386 and reloading ds, es on the lightweight exit path. Reported-by: Chris Clayron Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/vmx.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c39b60707e02..c00f03de1b79 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1488,13 +1488,6 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) loadsegment(ds, vmx->host_state.ds_sel); loadsegment(es, vmx->host_state.es_sel); } -#else - /* - * The sysexit path does not restore ds/es, so we must set them to - * a reasonable value ourselves. - */ - loadsegment(ds, __USER_DS); - loadsegment(es, __USER_DS); #endif reload_tss(); #ifdef CONFIG_X86_64 @@ -6370,6 +6363,19 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) #endif ); +#ifndef CONFIG_X86_64 + /* + * The sysexit path does not restore ds/es, so we must set them to + * a reasonable value ourselves. + * + * We can't defer this to vmx_load_host_state() since that function + * may be executed in interrupt context, which saves and restore segments + * around it, nullifying its effect. + */ + loadsegment(ds, __USER_DS); + loadsegment(es, __USER_DS); +#endif + vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) | (1 << VCPU_EXREG_RFLAGS) | (1 << VCPU_EXREG_CPL) From 707fba3fa76a4c8855552f5d4c1a12430c09bce8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 2 Aug 2012 09:04:39 +0200 Subject: [PATCH 0099/1098] ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS doesn't set up the pins properly. Enable the pins as well as on Thinkpad X230 Tablet. Reported-and-tested-by: Mario Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 344b221d2102..b9a5c4503336 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6206,6 +6206,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), + SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K), From 30b678d844af3305cda5953467005cebb5d7b687 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 30 Jul 2012 15:57:00 +0000 Subject: [PATCH 0100/1098] net: Allow driver to limit number of GSO segments per skb A peer (or local user) may cause TCP to use a nominal MSS of as little as 88 (actual MSS of 76 with timestamps). Given that we have a sufficiently prodigious local sender and the peer ACKs quickly enough, it is nevertheless possible to grow the window for such a connection to the point that we will try to send just under 64K at once. This results in a single skb that expands to 861 segments. In some drivers with TSO support, such an skb will require hundreds of DMA descriptors; a substantial fraction of a TX ring or even more than a full ring. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This particularly affects sfc, for which the issue is designated as CVE-2012-3412. Therefore: 1. Add the field net_device::gso_max_segs holding the device-specific limit. 2. In netif_skb_features(), if the number of segments is too high then mask out GSO features to force fall back to software GSO. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ net/core/dev.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index eb06e58bed0b..a9db4f33407f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1300,6 +1300,8 @@ struct net_device { /* for setting kernel sock attribute on TCP connection setup */ #define GSO_MAX_SIZE 65536 unsigned int gso_max_size; +#define GSO_MAX_SEGS 65535 + u16 gso_max_segs; #ifdef CONFIG_DCB /* Data Center Bridging netlink ops */ diff --git a/net/core/dev.c b/net/core/dev.c index 0cb3fe8d8e72..f91abf800161 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2134,6 +2134,9 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) __be16 protocol = skb->protocol; netdev_features_t features = skb->dev->features; + if (skb_shinfo(skb)->gso_segs > skb->dev->gso_max_segs) + features &= ~NETIF_F_GSO_MASK; + if (protocol == htons(ETH_P_8021Q)) { struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; protocol = veh->h_vlan_encapsulated_proto; @@ -5986,6 +5989,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name, dev_net_set(dev, &init_net); dev->gso_max_size = GSO_MAX_SIZE; + dev->gso_max_segs = GSO_MAX_SEGS; INIT_LIST_HEAD(&dev->napi_list); INIT_LIST_HEAD(&dev->unreg_list); From 7e6d06f0de3f74ca929441add094518ae332257c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 30 Jul 2012 15:57:44 +0000 Subject: [PATCH 0101/1098] sfc: Fix maximum number of TSO segments and minimum TX queue size Currently an skb requiring TSO may not fit within a minimum-size TX queue. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This issue is designated as CVE-2012-3412. Set the maximum number of TSO segments for our devices to 100. This should make no difference to behaviour unless the actual MSS is less than about 700. Increase the minimum TX queue size accordingly to allow for 2 worst-case skbs, so that there will definitely be space to add an skb after we wake a queue. To avoid invalidating existing configurations, change efx_ethtool_set_ringparam() to fix up values that are too small rather than returning -EINVAL. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 6 ++++++ drivers/net/ethernet/sfc/efx.h | 14 ++++++++++---- drivers/net/ethernet/sfc/ethtool.c | 16 +++++++++++----- drivers/net/ethernet/sfc/tx.c | 19 +++++++++++++++++++ 4 files changed, 46 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 70554a1b2b02..65a8d49106a4 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1503,6 +1503,11 @@ static int efx_probe_all(struct efx_nic *efx) goto fail2; } + BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT); + if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) { + rc = -EINVAL; + goto fail3; + } efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE; rc = efx_probe_filters(efx); @@ -2070,6 +2075,7 @@ static int efx_register_netdev(struct efx_nic *efx) net_dev->irq = efx->pci_dev->irq; net_dev->netdev_ops = &efx_netdev_ops; SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops); + net_dev->gso_max_segs = EFX_TSO_MAX_SEGS; rtnl_lock(); diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h index be8f9158a714..70755c97251a 100644 --- a/drivers/net/ethernet/sfc/efx.h +++ b/drivers/net/ethernet/sfc/efx.h @@ -30,6 +30,7 @@ extern netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb); extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc); +extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx); /* RX */ extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue); @@ -52,10 +53,15 @@ extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue); #define EFX_MAX_EVQ_SIZE 16384UL #define EFX_MIN_EVQ_SIZE 512UL -/* The smallest [rt]xq_entries that the driver supports. Callers of - * efx_wake_queue() assume that they can subsequently send at least one - * skb. Falcon/A1 may require up to three descriptors per skb_frag. */ -#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS)) +/* Maximum number of TCP segments we support for soft-TSO */ +#define EFX_TSO_MAX_SEGS 100 + +/* The smallest [rt]xq_entries that the driver supports. RX minimum + * is a bit arbitrary. For TX, we must have space for at least 2 + * TSO skbs. + */ +#define EFX_RXQ_MIN_ENT 128U +#define EFX_TXQ_MIN_ENT(efx) (2 * efx_tx_max_skb_descs(efx)) /* Filters */ extern int efx_probe_filters(struct efx_nic *efx); diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 10536f93b561..8cba2df82b18 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -680,21 +680,27 @@ static int efx_ethtool_set_ringparam(struct net_device *net_dev, struct ethtool_ringparam *ring) { struct efx_nic *efx = netdev_priv(net_dev); + u32 txq_entries; if (ring->rx_mini_pending || ring->rx_jumbo_pending || ring->rx_pending > EFX_MAX_DMAQ_SIZE || ring->tx_pending > EFX_MAX_DMAQ_SIZE) return -EINVAL; - if (ring->rx_pending < EFX_MIN_RING_SIZE || - ring->tx_pending < EFX_MIN_RING_SIZE) { + if (ring->rx_pending < EFX_RXQ_MIN_ENT) { netif_err(efx, drv, efx->net_dev, - "TX and RX queues cannot be smaller than %ld\n", - EFX_MIN_RING_SIZE); + "RX queues cannot be smaller than %u\n", + EFX_RXQ_MIN_ENT); return -EINVAL; } - return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending); + txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx)); + if (txq_entries != ring->tx_pending) + netif_warn(efx, drv, efx->net_dev, + "increasing TX queue size to minimum of %u\n", + txq_entries); + + return efx_realloc_channels(efx, ring->rx_pending, txq_entries); } static int efx_ethtool_set_pauseparam(struct net_device *net_dev, diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index 9b225a7769f7..18713436b443 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -119,6 +119,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr) return len; } +unsigned int efx_tx_max_skb_descs(struct efx_nic *efx) +{ + /* Header and payload descriptor for each output segment, plus + * one for every input fragment boundary within a segment + */ + unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS; + + /* Possibly one more per segment for the alignment workaround */ + if (EFX_WORKAROUND_5391(efx)) + max_descs += EFX_TSO_MAX_SEGS; + + /* Possibly more for PCIe page boundaries within input fragments */ + if (PAGE_SIZE > EFX_PAGE_SIZE) + max_descs += max_t(unsigned int, MAX_SKB_FRAGS, + DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE)); + + return max_descs; +} + /* * Add a socket buffer to a TX queue * From 1485348d2424e1131ea42efc033cbd9366462b01 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 30 Jul 2012 16:11:42 +0000 Subject: [PATCH 0102/1098] tcp: Apply device TSO segment limit earlier Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/net/sock.h | 2 ++ net/core/sock.c | 1 + net/ipv4/tcp.c | 4 +++- net/ipv4/tcp_cong.c | 3 ++- net/ipv4/tcp_output.c | 21 ++++++++++++--------- 5 files changed, 20 insertions(+), 11 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index b3730239bf18..72132aef53fc 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -218,6 +218,7 @@ struct cg_proto; * @sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK) * @sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4) * @sk_gso_max_size: Maximum GSO segment size to build + * @sk_gso_max_segs: Maximum number of GSO segments * @sk_lingertime: %SO_LINGER l_linger setting * @sk_backlog: always used with the per-socket spinlock held * @sk_callback_lock: used with the callbacks in the end of this struct @@ -338,6 +339,7 @@ struct sock { netdev_features_t sk_route_nocaps; int sk_gso_type; unsigned int sk_gso_max_size; + u16 sk_gso_max_segs; int sk_rcvlowat; unsigned long sk_lingertime; struct sk_buff_head sk_error_queue; diff --git a/net/core/sock.c b/net/core/sock.c index 6b654b3ddfda..8f67ced8d6a8 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1458,6 +1458,7 @@ void sk_setup_caps(struct sock *sk, struct dst_entry *dst) } else { sk->sk_route_caps |= NETIF_F_SG | NETIF_F_HW_CSUM; sk->sk_gso_max_size = dst->dev->gso_max_size; + sk->sk_gso_max_segs = dst->dev->gso_max_segs; } } } diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index e7e6eeae49c0..2109ff4a1daf 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -811,7 +811,9 @@ static unsigned int tcp_xmit_size_goal(struct sock *sk, u32 mss_now, old_size_goal + mss_now > xmit_size_goal)) { xmit_size_goal = old_size_goal; } else { - tp->xmit_size_goal_segs = xmit_size_goal / mss_now; + tp->xmit_size_goal_segs = + min_t(u16, xmit_size_goal / mss_now, + sk->sk_gso_max_segs); xmit_size_goal = tp->xmit_size_goal_segs * mss_now; } } diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index 4d4db16e336e..1432cdb0644c 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -291,7 +291,8 @@ bool tcp_is_cwnd_limited(const struct sock *sk, u32 in_flight) left = tp->snd_cwnd - in_flight; if (sk_can_gso(sk) && left * sysctl_tcp_tso_win_divisor < tp->snd_cwnd && - left * tp->mss_cache < sk->sk_gso_max_size) + left * tp->mss_cache < sk->sk_gso_max_size && + left < sk->sk_gso_max_segs) return true; return left <= tcp_max_tso_deferred_mss(tp); } diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 3f1bcff0b10b..a7b3ec9b6c3e 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1522,21 +1522,21 @@ static void tcp_cwnd_validate(struct sock *sk) * when we would be allowed to send the split-due-to-Nagle skb fully. */ static unsigned int tcp_mss_split_point(const struct sock *sk, const struct sk_buff *skb, - unsigned int mss_now, unsigned int cwnd) + unsigned int mss_now, unsigned int max_segs) { const struct tcp_sock *tp = tcp_sk(sk); - u32 needed, window, cwnd_len; + u32 needed, window, max_len; window = tcp_wnd_end(tp) - TCP_SKB_CB(skb)->seq; - cwnd_len = mss_now * cwnd; + max_len = mss_now * max_segs; - if (likely(cwnd_len <= window && skb != tcp_write_queue_tail(sk))) - return cwnd_len; + if (likely(max_len <= window && skb != tcp_write_queue_tail(sk))) + return max_len; needed = min(skb->len, window); - if (cwnd_len <= needed) - return cwnd_len; + if (max_len <= needed) + return max_len; return needed - needed % mss_now; } @@ -1765,7 +1765,8 @@ static bool tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb) limit = min(send_win, cong_win); /* If a full-sized TSO skb can be sent, do it. */ - if (limit >= sk->sk_gso_max_size) + if (limit >= min_t(unsigned int, sk->sk_gso_max_size, + sk->sk_gso_max_segs * tp->mss_cache)) goto send_now; /* Middle in queue won't get any more data, full sendable already? */ @@ -1999,7 +2000,9 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle, limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(sk, skb, mss_now, - cwnd_quota); + min_t(unsigned int, + cwnd_quota, + sk->sk_gso_max_segs)); if (skb->len > limit && unlikely(tso_fragment(sk, skb, limit, mss_now, gfp))) From e3c0d04750751389d5116267f8cf4687444d9a50 Mon Sep 17 00:00:00 2001 From: Fan Du Date: Mon, 30 Jul 2012 21:43:54 +0000 Subject: [PATCH 0103/1098] Fix unexpected SA hard expiration after changing date After SA is setup, one timer is armed to detect soft/hard expiration, however the timer handler uses xtime to do the math. This makes hard expiration occurs first before soft expiration after setting new date with big interval. As a result new child SA is deleted before rekeying the new one. Signed-off-by: Fan Du Signed-off-by: David S. Miller --- include/net/xfrm.h | 4 ++++ net/xfrm/xfrm_state.c | 21 +++++++++++++++++---- 2 files changed, 21 insertions(+), 4 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index d9509eb29b80..62b619e82a90 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -213,6 +213,9 @@ struct xfrm_state { struct xfrm_lifetime_cur curlft; struct tasklet_hrtimer mtimer; + /* used to fix curlft->add_time when changing date */ + long saved_tmo; + /* Last used time */ unsigned long lastused; @@ -238,6 +241,7 @@ static inline struct net *xs_net(struct xfrm_state *x) /* xflags - make enum if more show up */ #define XFRM_TIME_DEFER 1 +#define XFRM_SOFT_EXPIRE 2 enum { XFRM_STATE_VOID, diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 5b228f97d4b3..87cd0e4d4282 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -415,8 +415,17 @@ static enum hrtimer_restart xfrm_timer_handler(struct hrtimer * me) if (x->lft.hard_add_expires_seconds) { long tmo = x->lft.hard_add_expires_seconds + x->curlft.add_time - now; - if (tmo <= 0) - goto expired; + if (tmo <= 0) { + if (x->xflags & XFRM_SOFT_EXPIRE) { + /* enter hard expire without soft expire first?! + * setting a new date could trigger this. + * workarbound: fix x->curflt.add_time by below: + */ + x->curlft.add_time = now - x->saved_tmo - 1; + tmo = x->lft.hard_add_expires_seconds - x->saved_tmo; + } else + goto expired; + } if (tmo < next) next = tmo; } @@ -433,10 +442,14 @@ static enum hrtimer_restart xfrm_timer_handler(struct hrtimer * me) if (x->lft.soft_add_expires_seconds) { long tmo = x->lft.soft_add_expires_seconds + x->curlft.add_time - now; - if (tmo <= 0) + if (tmo <= 0) { warn = 1; - else if (tmo < next) + x->xflags &= ~XFRM_SOFT_EXPIRE; + } else if (tmo < next) { next = tmo; + x->xflags |= XFRM_SOFT_EXPIRE; + x->saved_tmo = tmo; + } } if (x->lft.soft_use_expires_seconds) { long tmo = x->lft.soft_use_expires_seconds + From 8b6d5c09bc0c49aea041486d77c2f67e98ae0bc3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 31 Jul 2012 11:39:37 +0000 Subject: [PATCH 0104/1098] bnx2x: fix mem leak when command is unknown In bnx2x_mcast_enqueue_cmd() we'll leak the memory allocated to 'new_cmd' if we hit the deafault case of the 'switch (cmd)'. Add a 'kfree(new_cmd)' to that case to avoid the leak. Signed-off-by: Jesper Juhl Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 734fd87cd990..62f754bd0dfe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -2485,6 +2485,7 @@ static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, break; default: + kfree(new_cmd); BNX2X_ERR("Unknown command: %d\n", cmd); return -EINVAL; } From a27032eee8cb6e16516f13c8a9752e9d5d4cc430 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 1 Aug 2012 21:10:51 +0200 Subject: [PATCH 0105/1098] sparc64: do not clobber personality flags in sys_sparc64_personality() There are multiple errors in how sys_sparc64_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: David S. Miller --- arch/sparc/kernel/sys_sparc_64.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 0dc1f5786081..11c6c9603e71 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -502,12 +502,12 @@ SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; - if (current->personality == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } From f6ff53d3611b564661896be23369b54d84941a0e Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Aug 2012 09:48:49 +0200 Subject: [PATCH 0106/1098] block: reorganize rounding of max_discard_sectors Mostly a preparation for the next patch. In principle this fixes an infinite loop if max_discard_sectors < granularity, but that really shouldn't happen. Signed-off-by: Paolo Bonzini Acked-by: Vivek Goyal Tested-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-lib.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 2b461b496a78..16b06f62e68c 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,6 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; + unsigned int granularity; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -54,18 +55,18 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (!blk_queue_discard(q)) return -EOPNOTSUPP; + /* Zero-sector (unknown) and one-sector granularities are the same. */ + granularity = max(q->limits.discard_granularity >> 9, 1U); + /* * Ensure that max_discard_sectors is of the proper * granularity */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); + max_discard_sectors = round_down(max_discard_sectors, granularity); if (unlikely(!max_discard_sectors)) { /* Avoid infinite loop below. Being cautious never hurts. */ return -EOPNOTSUPP; - } else if (q->limits.discard_granularity) { - unsigned int disc_sects = q->limits.discard_granularity >> 9; - - max_discard_sectors &= ~(disc_sects - 1); } if (flags & BLKDEV_DISCARD_SECURE) { From c6e666345e1b79c62ba82339cc7d55a89cb73f88 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 2 Aug 2012 09:48:50 +0200 Subject: [PATCH 0107/1098] block: split discard into aligned requests When a disk has large discard_granularity and small max_discard_sectors, discards are not split with optimal alignment. In the limit case of discard_granularity == max_discard_sectors, no request could be aligned correctly, so in fact you might end up with no discarded logical blocks at all. Another example that helps showing the condition in the patch is with discard_granularity == 64, max_discard_sectors == 128. A request that is submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257. However, only 2 aligned blocks out of 3 are included in the request; 128..191 may be left intact and not discarded. With this patch, the first request will be truncated to ensure good alignment of what's left, and the split will be 2..127, 128..255, 256..257. The patch will also take into account the discard_alignment. At most one extra request will be introduced, because the first request will be reduced by at most granularity-1 sectors, and granularity must be less than max_discard_sectors. Subsequent requests will run on round_down(max_discard_sectors, granularity) sectors, as in the current code. Signed-off-by: Paolo Bonzini Acked-by: Vivek Goyal Tested-by: Mike Snitzer Signed-off-by: Jens Axboe --- block/blk-lib.c | 34 ++++++++++++++++++++++++---------- include/linux/blkdev.h | 10 ++++++++++ 2 files changed, 34 insertions(+), 10 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index 16b06f62e68c..19cc761cacb2 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,7 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; - unsigned int granularity; + unsigned int granularity, alignment, mask; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -57,10 +57,12 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, /* Zero-sector (unknown) and one-sector granularities are the same. */ granularity = max(q->limits.discard_granularity >> 9, 1U); + mask = granularity - 1; + alignment = (bdev_discard_alignment(bdev) >> 9) & mask; /* * Ensure that max_discard_sectors is of the proper - * granularity + * granularity, so that requests stay aligned after a split. */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); max_discard_sectors = round_down(max_discard_sectors, granularity); @@ -80,25 +82,37 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bb.wait = &wait; while (nr_sects) { + unsigned int req_sects; + sector_t end_sect; + bio = bio_alloc(gfp_mask, 1); if (!bio) { ret = -ENOMEM; break; } + req_sects = min_t(sector_t, nr_sects, max_discard_sectors); + + /* + * If splitting a request, and the next starting sector would be + * misaligned, stop the discard at the previous aligned sector. + */ + end_sect = sector + req_sects; + if (req_sects < nr_sects && (end_sect & mask) != alignment) { + end_sect = + round_down(end_sect - alignment, granularity) + + alignment; + req_sects = end_sect - sector; + } + bio->bi_sector = sector; bio->bi_end_io = bio_batch_end_io; bio->bi_bdev = bdev; bio->bi_private = &bb; - if (nr_sects > max_discard_sectors) { - bio->bi_size = max_discard_sectors << 9; - nr_sects -= max_discard_sectors; - sector += max_discard_sectors; - } else { - bio->bi_size = nr_sects << 9; - nr_sects = 0; - } + bio->bi_size = req_sects << 9; + nr_sects -= req_sects; + sector = end_sect; atomic_inc(&bb.done); submit_bio(type, bio); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 4e72a9d48232..281516ae8b4e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1139,6 +1139,16 @@ static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector & (lim->discard_granularity - 1); } +static inline int bdev_discard_alignment(struct block_device *bdev) +{ + struct request_queue *q = bdev_get_queue(bdev); + + if (bdev != bdev->bd_contains) + return bdev->bd_part->discard_alignment; + + return q->limits.discard_alignment; +} + static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) { if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1) From 53362a05ae683e12a20d9ffdf58a88094a0bed9d Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Thu, 2 Aug 2012 09:50:39 +0200 Subject: [PATCH 0108/1098] fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices For regular file, write operaion used blk_plug function.But for block file,write operation did not use blk_plug. This patch is also for write-cache mode for block-device. Signed-off-by: Jianpeng Ma Reviewed-by: NeilBrown Signed-off-by: Jens Axboe --- fs/block_dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/block_dev.c b/fs/block_dev.c index 1e519195d45b..38e721b35d45 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1578,10 +1578,12 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { struct file *file = iocb->ki_filp; + struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); + blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); if (ret > 0 || ret == -EIOCBQUEUED) { ssize_t err; @@ -1590,6 +1592,7 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } + blk_finish_plug(&plug); return ret; } EXPORT_SYMBOL_GPL(blkdev_aio_write); From 2d4e6dc628b43fbbbc9219e233ec3ee0afb707e3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 11:23:16 -0300 Subject: [PATCH 0109/1098] ARM: dts: imx27-3ds.dts: Fix serial console node Fix serial console node and allow the board to boot again. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/boot/dts/imx27-3ds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e0..0a8978a40ece 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; From e33cdac014d50dd9753e1399ae8b0b5cd98d7aa0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 1 Aug 2012 23:23:40 +0000 Subject: [PATCH 0110/1098] ipv4: route.c cleanup Remove unused includes after IP cache removal Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index c035251beb07..e4ba974f143c 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -70,7 +70,6 @@ #include #include #include -#include #include #include #include @@ -80,7 +79,6 @@ #include #include #include -#include #include #include #include @@ -88,11 +86,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include From 98d3088e534a2a61f6690b5426909b0c3b57a785 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Aug 2012 20:05:47 +0100 Subject: [PATCH 0111/1098] ASoC: core: Fix check before defaulting to regmap Check if the chip has provided a write operation (which is mandatory for I/O) rather than looking for control data as some of the MFDs use a global for this. Also skip the attempt if there's no regmap available by device in case things get confused by the attempt to default. Signed-off-by: Mark Brown Tested-by: Peter Ujfalusi --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f219b2f7ee68..f81c5976b961 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1096,7 +1096,7 @@ static int soc_probe_codec(struct snd_soc_card *card, } /* If the driver didn't set I/O up try regmap */ - if (!codec->control_data) + if (!codec->write && dev_get_regmap(codec->dev, NULL)) snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP); if (driver->controls) From 0e8d96dd2c99405c707f540b5922ec869b848979 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Mon, 20 Feb 2012 03:46:12 -0500 Subject: [PATCH 0112/1098] exofs: readpage_strip: Add a BUG_ON to check for PageLocked(page) readpage_strip can be called from several code paths all of which require that the page be locked before any operations are carried out. Since we export the exofs_readpage callback to the VFS, add a BUG_ON to check for PageLocked(page) to make sure that this understanding is never compromised. Signed-off-by: Kautuk Consul Signed-off-by: Boaz Harrosh --- fs/exofs/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 5badb0c039de..9a5ed30b8a35 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -389,6 +389,8 @@ static int readpage_strip(void *data, struct page *page) size_t len; int ret; + BUG_ON(!PageLocked(page)); + /* FIXME: Just for debugging, will be removed */ if (PageUptodate(page)) EXOFS_ERR("PageUptodate(0x%lx, 0x%lx)\n", pcol->inode->i_ino, From 66153f6e0f89c75d18e490739b0149dfd2e53b69 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 4 Jun 2012 14:48:27 +0300 Subject: [PATCH 0113/1098] exofs: stop using s_dirt Exofs has the '->write_super()' handler and makes some use of the '->s_dirt' superblock flag, but it really needs neither of them because it never sets 's_dirt' to one which means the VFS never calls its '->write_super()' handler. Thus, remove both. Note, I am trying to remove both 's_dirt' and 'write_super()' from VFS altogether once all users are gone. Signed-off-by: Artem Bityutskiy Signed-off-by: Boaz Harrosh --- fs/exofs/super.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/fs/exofs/super.c b/fs/exofs/super.c index 433783624d10..dde41a75c7c8 100644 --- a/fs/exofs/super.c +++ b/fs/exofs/super.c @@ -400,8 +400,6 @@ static int exofs_sync_fs(struct super_block *sb, int wait) ret = ore_write(ios); if (unlikely(ret)) EXOFS_ERR("%s: ore_write failed.\n", __func__); - else - sb->s_dirt = 0; unlock_super(sb); @@ -412,14 +410,6 @@ out: return ret; } -static void exofs_write_super(struct super_block *sb) -{ - if (!(sb->s_flags & MS_RDONLY)) - exofs_sync_fs(sb, 1); - else - sb->s_dirt = 0; -} - static void _exofs_print_device(const char *msg, const char *dev_path, struct osd_dev *od, u64 pid) { @@ -952,7 +942,6 @@ static const struct super_operations exofs_sops = { .write_inode = exofs_write_inode, .evict_inode = exofs_evict_inode, .put_super = exofs_put_super, - .write_super = exofs_write_super, .sync_fs = exofs_sync_fs, .statfs = exofs_statfs, }; From 4b74f6ea8417e48bb1fc65880a0574134a8b4745 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Fri, 20 Jul 2012 15:50:27 +0300 Subject: [PATCH 0114/1098] exofs: Fix __r4w_get_page when offset is beyond i_size It is very common for the end of the file to be unaligned on stripe size. But since we know it's beyond file's end then the XOR should be preformed with all zeros. Old code used to just read zeros out of the OSD devices, which is a great waist. But what scares me more about this situation is that, we now have pages attached to the file's mapping that are beyond i_size. I don't like the kind of bugs this calls for. Fix both birds, by returning a global ZERO_PAGE, if offset is beyond i_size. Signed-off-by: Boaz Harrosh --- fs/exofs/inode.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 9a5ed30b8a35..3b2ee72aecbe 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -574,8 +574,16 @@ static struct page *__r4w_get_page(void *priv, u64 offset, bool *uptodate) if (!pcol->that_locked_page || (pcol->that_locked_page->index != index)) { - struct page *page = find_get_page(pcol->inode->i_mapping, index); + struct page *page; + loff_t i_size = i_size_read(pcol->inode); + if (offset >= i_size) { + *uptodate = true; + EXOFS_DBGMSG("offset >= i_size index=0x%lx\n", index); + return ZERO_PAGE(0); + } + + page = find_get_page(pcol->inode->i_mapping, index); if (!page) { page = find_or_create_page(pcol->inode->i_mapping, index, GFP_NOFS); @@ -604,12 +612,13 @@ static void __r4w_put_page(void *priv, struct page *page) { struct page_collect *pcol = priv; - if (pcol->that_locked_page != page) { + if ((pcol->that_locked_page != page) && (ZERO_PAGE(0) != page)) { EXOFS_DBGMSG("index=0x%lx\n", page->index); page_cache_release(page); return; } - EXOFS_DBGMSG("that_locked_page index=0x%lx\n", page->index); + EXOFS_DBGMSG("that_locked_page index=0x%lx\n", + ZERO_PAGE(0) == page ? -1 : page->index); } static const struct _ore_r4w_op _r4w_op = { From 03f6b0843ad6512f27bc2e48f04c21065311e03e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 1 Aug 2012 15:58:42 -0500 Subject: [PATCH 0115/1098] cfg80211: add channel flag to prohibit OFDM operation Currently the only way for wireless drivers to tell whether or not OFDM is allowed on the current channel is to check the regulatory information. However, this requires hodling cfg80211_mutex, which is not visible to the drivers. Other regulatory restrictions are provided as flags in the channel definition, so let's do similarly with OFDM. This patch adds a new flag, IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not allowed. This flag is set on any channels for which regulatory indicates that OFDM is prohibited. Signed-off-by: Seth Forshee Tested-by: Arend van Spriel Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ net/wireless/reg.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 493fa0c79005..3d254e10ff30 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -96,6 +96,7 @@ enum ieee80211_band { * is not permitted. * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. + * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -104,6 +105,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_RADAR = 1<<3, IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, + IEEE80211_CHAN_NO_OFDM = 1<<6, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/net/wireless/reg.c b/net/wireless/reg.c index a9175fedeb59..cbf30de79c69 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -680,6 +680,8 @@ static u32 map_regdom_flags(u32 rd_flags) channel_flags |= IEEE80211_CHAN_NO_IBSS; if (rd_flags & NL80211_RRF_DFS) channel_flags |= IEEE80211_CHAN_RADAR; + if (rd_flags & NL80211_RRF_NO_OFDM) + channel_flags |= IEEE80211_CHAN_NO_OFDM; return channel_flags; } From 899852af60c212bfe9a2fb71d4d9082d2622df5c Mon Sep 17 00:00:00 2001 From: Paul Stewart Date: Wed, 1 Aug 2012 16:54:42 -0700 Subject: [PATCH 0116/1098] cfg80211: Clear "beacon_found" on regulatory restore Restore the default state to the "beacon_found" flag when the channel flags are restored. Otherwise, we can end up with a channel that we can no longer transmit on even when we can see beacons on that channel. Signed-off-by: Paul Stewart Signed-off-by: Johannes Berg --- net/wireless/reg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cbf30de79c69..2ded3c7fad06 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1901,6 +1901,7 @@ static void restore_custom_reg_settings(struct wiphy *wiphy) chan->flags = chan->orig_flags; chan->max_antenna_gain = chan->orig_mag; chan->max_power = chan->orig_mpwr; + chan->beacon_found = false; } } } From be388f3d9af4155db0dc9e7e59dd49db90271c1c Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 2 Aug 2012 14:59:57 +0300 Subject: [PATCH 0117/1098] exofs: Use proper max_IO calculations from ore exofs_max_io_pages should just use the ORE's calculated layout->max_io_length, And avoid unnecessary BUGs, calculations made here were also a layering violation. Signed-off-by: Boaz Harrosh --- fs/exofs/inode.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 3b2ee72aecbe..1562c27a2fab 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -37,15 +37,12 @@ #define EXOFS_DBGMSG2(M...) do {} while (0) -enum {MAX_PAGES_KMALLOC = PAGE_SIZE / sizeof(struct page *), }; - unsigned exofs_max_io_pages(struct ore_layout *layout, unsigned expected_pages) { - unsigned pages = min_t(unsigned, expected_pages, MAX_PAGES_KMALLOC); + unsigned pages = min_t(unsigned, expected_pages, + layout->max_io_length / PAGE_SIZE); - /* TODO: easily support bio chaining */ - pages = min_t(unsigned, pages, layout->max_io_length / PAGE_SIZE); return pages; } @@ -101,7 +98,8 @@ static void _pcol_reset(struct page_collect *pcol) * it might not end here. don't be left with nothing */ if (!pcol->expected_pages) - pcol->expected_pages = MAX_PAGES_KMALLOC; + pcol->expected_pages = + exofs_max_io_pages(&pcol->sbi->layout, ~0); } static int pcol_try_alloc(struct page_collect *pcol) From 9e62bb4458ad2cf28bd701aa5fab380b846db326 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 1 Aug 2012 17:48:36 +0300 Subject: [PATCH 0118/1098] ore: Fix out-of-bounds access in _ios_obj() _ios_obj() is accessed by group_index not device_table index. The oc->comps array is only a group_full of devices at a time it is not like ore_comp_dev() which is indexed by a global device_table index. This did not BUG until now because exofs only uses a single COMP for all devices. But with other FSs like PanFS this is not true. This bug was only in the write_path, all other users were using it correctly [This is a bug since 3.2 Kernel] CC: Stable Tree Signed-off-by: Boaz Harrosh --- fs/exofs/ore.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c index 24a49d47e935..1585db1aa365 100644 --- a/fs/exofs/ore.c +++ b/fs/exofs/ore.c @@ -837,11 +837,11 @@ static int _write_mirror(struct ore_io_state *ios, int cur_comp) bio->bi_rw |= REQ_WRITE; } - osd_req_write(or, _ios_obj(ios, dev), per_dev->offset, - bio, per_dev->length); + osd_req_write(or, _ios_obj(ios, cur_comp), + per_dev->offset, bio, per_dev->length); ORE_DBGMSG("write(0x%llx) offset=0x%llx " "length=0x%llx dev=%d\n", - _LLU(_ios_obj(ios, dev)->id), + _LLU(_ios_obj(ios, cur_comp)->id), _LLU(per_dev->offset), _LLU(per_dev->length), dev); } else if (ios->kern_buff) { @@ -853,20 +853,20 @@ static int _write_mirror(struct ore_io_state *ios, int cur_comp) (ios->si.unit_off + ios->length > ios->layout->stripe_unit)); - ret = osd_req_write_kern(or, _ios_obj(ios, per_dev->dev), + ret = osd_req_write_kern(or, _ios_obj(ios, cur_comp), per_dev->offset, ios->kern_buff, ios->length); if (unlikely(ret)) goto out; ORE_DBGMSG2("write_kern(0x%llx) offset=0x%llx " "length=0x%llx dev=%d\n", - _LLU(_ios_obj(ios, dev)->id), + _LLU(_ios_obj(ios, cur_comp)->id), _LLU(per_dev->offset), _LLU(ios->length), per_dev->dev); } else { - osd_req_set_attributes(or, _ios_obj(ios, dev)); + osd_req_set_attributes(or, _ios_obj(ios, cur_comp)); ORE_DBGMSG2("obj(0x%llx) set_attributes=%d dev=%d\n", - _LLU(_ios_obj(ios, dev)->id), + _LLU(_ios_obj(ios, cur_comp)->id), ios->out_attr_len, dev); } From 5bc6f9888db5739abfa0cae279b4b442e4db8049 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 30 Jul 2012 10:18:05 -0400 Subject: [PATCH 0119/1098] xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back. When we release pages back during bootup: Freeing 9d-100 pfn range: 99 pages freed Freeing 9cf36-9d0d2 pfn range: 412 pages freed Freeing 9f6bd-9f6bf pfn range: 2 pages freed Freeing 9f714-9f7bf pfn range: 171 pages freed Freeing 9f7e0-9f7ff pfn range: 31 pages freed Freeing 9f800-100000 pfn range: 395264 pages freed Released 395979 pages of unused memory We then try to populate those pages back. In the P2M tree however the space for those leafs must be reserved - as such we use extend_brk. We reserve 8MB of _brk space, which means we can fit over 1048576 PFNs - which is more than we should ever need. Without this, on certain compilation of the kernel we would hit: (XEN) domain_crash_sync called from entry.S (XEN) CPU: 0 (XEN) RIP: e033:[] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81a7c000 rbx: 000000000000003d rcx: 0000000000001000 (XEN) rdx: ffffffff81a7b000 rsi: 0000000000001000 rdi: 0000000000001000 (XEN) rbp: ffffffff81801cd8 rsp: ffffffff81801c98 r8: 0000000000100000 (XEN) r9: ffffffff81a7a000 r10: 0000000000000001 r11: 0000000000000003 (XEN) r12: 0000000000000004 r13: 0000000000000004 r14: 000000000000003d (XEN) r15: 00000000000001e8 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000125803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801c98: .. which is extend_brk hitting a BUG_ON. Interestingly enough, most of the time we are not going to hit this b/c the _brk space is quite large (v3.5): ffffffff81a25000 B __brk_base ffffffff81e43000 B __brk_limit = ~4MB. vs earlier kernels (with this back-ported), the space is smaller: ffffffff81a25000 B __brk_base ffffffff81a7b000 B __brk_limit = 344 kBytes. where we would certainly hit this and hit extend_brk. Note that git commit c3d93f880197953f86ab90d9da4744e926b38e33 (xen: populate correct number of pages when across mem boundary (v2)) exposed this bug). [v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion] CC: stable@vger.kernel.org #only for 3.5 Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 64effdc6da94..b2e91d40a4cb 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -194,6 +194,11 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID * boundary violation will require three middle nodes. */ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); +/* When we populate back during bootup, the amount of pages can vary. The + * max we have is seen is 395979, but that does not mean it can't be more. + * But some machines can have 3GB I/O holes even. So lets reserve enough + * for 4GB of I/O and E820 holes. */ +RESERVE_BRK(p2m_populated, PMD_SIZE * 4); static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); From cb0b29e0861659c9eef9664772cd7e845ba1104a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 2 Aug 2012 11:42:57 -0300 Subject: [PATCH 0120/1098] perf evlist: Introduce perf_evlist__parse_sample That is a more compact form of perf_session__parse_sample and to support multiple evlists per perf_session is the way to go anyway. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-vkxx3j5qktoj11bvcwmfjj13@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-test.c | 8 ++------ tools/perf/builtin-top.c | 2 +- tools/perf/util/evlist.c | 9 +++++++++ tools/perf/util/evlist.h | 4 ++++ tools/perf/util/python.c | 6 +----- tools/perf/util/session.c | 19 ++++--------------- tools/perf/util/session.h | 4 ---- 7 files changed, 21 insertions(+), 31 deletions(-) diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index e5032ed2f259..1d592f5cbea9 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -562,9 +562,7 @@ static int test__basic_mmap(void) goto out_munmap; } - err = perf_event__parse_sample(event, attr.sample_type, - evsels[0]->sample_size, - false, &sample, false); + err = perf_evlist__parse_sample(evlist, event, &sample, false); if (err) { pr_err("Can't parse sample, err = %d\n", err); goto out_munmap; @@ -781,9 +779,7 @@ static int test__PERF_RECORD(void) if (type < PERF_RECORD_MAX) nr_events[type]++; - err = perf_event__parse_sample(event, evsel->attr.sample_type, - evsel->sample_size, true, - &sample, false); + err = perf_evlist__parse_sample(evlist, event, &sample, false); if (err < 0) { if (verbose) perf_event__fprintf(event, stderr); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 520e4256fc66..40264eaa9f0f 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -811,7 +811,7 @@ static void perf_top__mmap_read_idx(struct perf_top *top, int idx) int ret; while ((event = perf_evlist__mmap_read(top->evlist, idx)) != NULL) { - ret = perf_session__parse_sample(session, event, &sample); + ret = perf_evlist__parse_sample(top->evlist, event, &sample, false); if (ret) { pr_err("Can't parse sample, err = %d\n", ret); continue; diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 3edfd3483816..1a560e0904a5 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -881,3 +881,12 @@ int perf_evlist__start_workload(struct perf_evlist *evlist) return 0; } + +int perf_evlist__parse_sample(struct perf_evlist *evlist, + const union perf_event *event, + struct perf_sample *sample, bool swapped) +{ + struct perf_evsel *e = list_entry(evlist->entries.next, struct perf_evsel, node); + return perf_event__parse_sample(event, e->attr.sample_type, e->sample_size, + e->attr.sample_id_all, sample, swapped); +} diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index 40d4d3cdced0..a5a49118a91a 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -122,6 +122,10 @@ u64 perf_evlist__sample_type(const struct perf_evlist *evlist); bool perf_evlist__sample_id_all(const const struct perf_evlist *evlist); u16 perf_evlist__id_hdr_size(const struct perf_evlist *evlist); +int perf_evlist__parse_sample(struct perf_evlist *evlist, + const union perf_event *event, + struct perf_sample *sample, bool swapped); + bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist); bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist); diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index b0d6f85e30f1..0688bfb6d280 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -797,17 +797,13 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist, event = perf_evlist__mmap_read(evlist, cpu); if (event != NULL) { - struct perf_evsel *first; PyObject *pyevent = pyrf_event__new(event); struct pyrf_event *pevent = (struct pyrf_event *)pyevent; if (pyevent == NULL) return PyErr_NoMemory(); - first = list_entry(evlist->entries.next, struct perf_evsel, node); - err = perf_event__parse_sample(event, first->attr.sample_type, - first->sample_size, - sample_id_all, &pevent->sample, false); + err = perf_evlist__parse_sample(evlist, event, &pevent->sample, false); if (err) return PyErr_Format(PyExc_OSError, "perf: can't parse sample, err=%d", err); diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 5b8601df2392..7d07324db41c 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -16,19 +16,6 @@ #include "cpumap.h" #include "event-parse.h" -int perf_session__parse_sample(struct perf_session *session, - const union perf_event *event, - struct perf_sample *sample) -{ - struct perf_evsel *first; - first = list_entry(session->evlist->entries.next, struct perf_evsel, node); - - return perf_event__parse_sample(event, first->attr.sample_type, - first->sample_size, - first->attr.sample_id_all, sample, - session->header.needs_swap); -} - int perf_session__synthesize_sample(struct perf_session *session, union perf_event *event, const struct perf_sample *sample) @@ -692,7 +679,8 @@ static void flush_sample_queue(struct perf_session *s, if (iter->timestamp > limit) break; - ret = perf_session__parse_sample(s, iter->event, &sample); + ret = perf_evlist__parse_sample(s->evlist, iter->event, &sample, + s->header.needs_swap); if (ret) pr_err("Can't parse sample, err = %d\n", ret); else @@ -1103,7 +1091,8 @@ static int perf_session__process_event(struct perf_session *session, /* * For all kernel events we get the sample data */ - ret = perf_session__parse_sample(session, event, &sample); + ret = perf_evlist__parse_sample(session->evlist, event, &sample, + session->header.needs_swap); if (ret) return ret; diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index e2a1a4b7b236..7389fb1f010a 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -126,10 +126,6 @@ size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp); -int perf_session__parse_sample(struct perf_session *session, - const union perf_event *event, - struct perf_sample *sample); - int perf_session__synthesize_sample(struct perf_session *session, union perf_event *event, const struct perf_sample *sample); From a3f698fe3082ff80a7f3b27c9b64b4b748c81f9d Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 2 Aug 2012 12:23:46 -0300 Subject: [PATCH 0121/1098] perf evsel: Adopt parse_sample method from perf_event Since we need evsel->{attr.{sample_{id_all,type}},sample_size}, reducing the number of parameters tools have to pass. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/event.h | 3 --- tools/perf/util/evlist.c | 6 ++---- tools/perf/util/evlist.h | 3 +-- tools/perf/util/evsel.c | 12 ++++++------ tools/perf/util/evsel.h | 2 ++ 5 files changed, 11 insertions(+), 15 deletions(-) diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h index 1b197280c621..d84870b06426 100644 --- a/tools/perf/util/event.h +++ b/tools/perf/util/event.h @@ -197,9 +197,6 @@ int perf_event__preprocess_sample(const union perf_event *self, const char *perf_event__name(unsigned int id); -int perf_event__parse_sample(const union perf_event *event, u64 type, - int sample_size, bool sample_id_all, - struct perf_sample *sample, bool swapped); int perf_event__synthesize_sample(union perf_event *event, u64 type, const struct perf_sample *sample, bool swapped); diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 1a560e0904a5..9b38681add9e 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -882,11 +882,9 @@ int perf_evlist__start_workload(struct perf_evlist *evlist) return 0; } -int perf_evlist__parse_sample(struct perf_evlist *evlist, - const union perf_event *event, +int perf_evlist__parse_sample(struct perf_evlist *evlist, union perf_event *event, struct perf_sample *sample, bool swapped) { struct perf_evsel *e = list_entry(evlist->entries.next, struct perf_evsel, node); - return perf_event__parse_sample(event, e->attr.sample_type, e->sample_size, - e->attr.sample_id_all, sample, swapped); + return perf_evsel__parse_sample(e, event, sample, swapped); } diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index a5a49118a91a..528c1acd9298 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -122,8 +122,7 @@ u64 perf_evlist__sample_type(const struct perf_evlist *evlist); bool perf_evlist__sample_id_all(const const struct perf_evlist *evlist); u16 perf_evlist__id_hdr_size(const struct perf_evlist *evlist); -int perf_evlist__parse_sample(struct perf_evlist *evlist, - const union perf_event *event, +int perf_evlist__parse_sample(struct perf_evlist *evlist, union perf_event *event, struct perf_sample *sample, bool swapped); bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist); diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 8feec4011356..2eaae140def2 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -729,10 +729,10 @@ static bool sample_overlap(const union perf_event *event, return false; } -int perf_event__parse_sample(const union perf_event *event, u64 type, - int sample_size, bool sample_id_all, +int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, struct perf_sample *data, bool swapped) { + u64 type = evsel->attr.sample_type; const u64 *array; /* @@ -747,14 +747,14 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, data->period = 1; if (event->header.type != PERF_RECORD_SAMPLE) { - if (!sample_id_all) + if (!evsel->attr.sample_id_all) return 0; return perf_event__parse_id_sample(event, type, data, swapped); } array = event->sample.array; - if (sample_size + sizeof(event->header) > event->header.size) + if (evsel->sample_size + sizeof(event->header) > event->header.size) return -EFAULT; if (type & PERF_SAMPLE_IP) { @@ -896,7 +896,7 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, u.val32[1] = sample->tid; if (swapped) { /* - * Inverse of what is done in perf_event__parse_sample + * Inverse of what is done in perf_evsel__parse_sample */ u.val32[0] = bswap_32(u.val32[0]); u.val32[1] = bswap_32(u.val32[1]); @@ -931,7 +931,7 @@ int perf_event__synthesize_sample(union perf_event *event, u64 type, u.val32[0] = sample->cpu; if (swapped) { /* - * Inverse of what is done in perf_event__parse_sample + * Inverse of what is done in perf_evsel__parse_sample */ u.val32[0] = bswap_32(u.val32[0]); u.val64 = bswap_64(u.val64); diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 894bd77d90cc..b559929983bb 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -180,4 +180,6 @@ static inline int perf_evsel__read_scaled(struct perf_evsel *evsel, void hists__init(struct hists *hists); +int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event, + struct perf_sample *sample, bool swapped); #endif /* __PERF_EVSEL_H */ From c263c2c1ad615e935d563cd7be11d417f94895d9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 23 Jul 2012 18:20:12 +0200 Subject: [PATCH 0122/1098] bcma: BCM43228 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/host_pci.c | 1 + drivers/bcma/sprom.c | 4 +++- include/linux/bcma/bcma_driver_chipcommon.h | 6 ++++++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index 11b32d2642df..a6e5672c67e7 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index 26823d97fd9f..9ea4627dc0c2 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus) /* for these chips OTP is always available */ present = true; break; - + case BCMA_CHIP_ID_BCM43228: + present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; + break; default: present = false; break; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 3c80885fa829..d323a4b4143c 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -89,6 +89,12 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001 +#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002 +#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004 +#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008 +#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010 +#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020 #define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ #define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ From 828afd26fe78f87d0bd1dfce64c561f78c1a8969 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 23 Jul 2012 22:57:01 +0200 Subject: [PATCH 0123/1098] b43: fix logic in GPIO init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add some comments by the way Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b80352b308d5..a140165dfee0 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev) if (dev->dev->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ } - if (dev->dev->chip_id == 0x5354) - set &= 0xff02; + if (0 /* FIXME: conditional unknown */ ) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0100); - mask |= 0x0180; - set |= 0x0180; + /* BT Coexistance Input */ + mask |= 0x0080; + set |= 0x0080; + /* BT Coexistance Out */ + mask |= 0x0100; + set |= 0x0100; } if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) { + /* PA is controlled by gpio 9, let ucode handle it */ b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } - if (dev->dev->core_rev >= 2) - mask |= 0x0010; /* FIXME: This is redundant. */ switch (dev->dev->bus_type) { #ifdef CONFIG_B43_BCMA case B43_BUS_BCMA: bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL, (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc, - BCMA_CC_GPIOCTL) & mask) | set); + BCMA_CC_GPIOCTL) & ~mask) | set); break; #endif #ifdef CONFIG_B43_SSB @@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev) if (gpiodev) ssb_write32(gpiodev, B43_GPIO_CONTROL, (ssb_read32(gpiodev, B43_GPIO_CONTROL) - & mask) | set); + & ~mask) | set); break; #endif } From 9d5d496c3464b7ad0ba942b4ada5f27c07e07079 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 30 Jul 2012 22:58:04 +0100 Subject: [PATCH 0124/1098] libertas: don't reset card on error when it is being removed On an OLPC XO-1.5 we have seen the following situation: - the system starts going into suspend - no wake params are set, so the mmc layer removes the card - during remove, we send a command to the card - that command fails, causing if_sdio's reset method to try and remove the mmc card in attempt to reset it - the mmc layer is not happy about being asked to remove a card that it is already removing, and the kernel crashes While the MMC layer could possibly be taught to behave better here, it also seems sensible for libertas not to try and reset a card if we're in the process of removing it anyway. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 58048189bd24..fe1ea43c5149 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -571,7 +571,10 @@ static int lbs_thread(void *data) netdev_info(dev, "Timeout submitting command 0x%04x\n", le16_to_cpu(cmdnode->cmdbuf->command)); lbs_complete_command(priv, cmdnode, -ETIMEDOUT); - if (priv->reset_card) + + /* Reset card, but only when it isn't in the process + * of being shutdown anyway. */ + if (!dev->dismantle && priv->reset_card) priv->reset_card(priv); } priv->cmd_timed_out = 0; From 16ebd60856bc5d980722cb85b259a4d5b301e94a Mon Sep 17 00:00:00 2001 From: Woody Hung Date: Tue, 31 Jul 2012 21:53:33 +0800 Subject: [PATCH 0125/1098] rt2x00 : fix rt3290 resuming failed. This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by: Woody Hung Cc: Kevin Chou Signed-off-by: Chen, Chien-Chia Reviewed-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 68 +++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800pci.c | 71 ------------------------- 2 files changed, 68 insertions(+), 71 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 88455b1b9fe0..cb8c2aca54e4 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } +static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + if (rt2x00_get_field32(reg, WLAN_EN)) + return 0; + + rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(®, WLAN_CLK_EN, 0); + rt2x00_set_field32(®, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, CMB_CTRL, ®); + if (rt2x00_get_field32(reg, PLL_LD) && + rt2x00_get_field32(reg, XTAL_RDY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + if (i >= REGISTER_BUSY_COUNT) { + + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(®, WLAN_CLK_EN, 1); + rt2x00_set_field32(®, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(®, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} + void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, { unsigned int i; u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } /* * If driver doesn't wake up firmware here, diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 235376e9cb04..98aa426a3564 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(®, WLAN_CLK_EN, 0); - rt2x00_set_field32(®, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(®, WLAN_CLK_EN, 1); - rt2x00_set_field32(®, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(®, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; @@ -1062,17 +1002,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - /* - * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan - * clk for rt3290. That avoid the MCU fail in start phase. - */ - if (rt2x00_rt(rt2x00dev, RT3290)) { - retval = rt2800_enable_wlan_rt3290(rt2x00dev); - - if (retval) - return retval; - } - /* * This device has multiple filters for control frames * and has a separate filter for PS Poll frames. From 8c1057e43c99e393fe2e14cca879affcb516d36b Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 1 Aug 2012 21:35:36 +0100 Subject: [PATCH 0126/1098] libertas: fix two memory leaks The if_sdio_card structure was never being freed, and neither was the command structure used for association. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 1 + drivers/net/wireless/libertas/if_sdio.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index eb5de800ed90..1c10b542ab23 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv, netif_tx_wake_all_queues(priv->dev); } + kfree(cmd); done: lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 76caebaa4397..e970897f6ab5 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func) kfree(packet); } + kfree(card); lbs_deb_leave(LBS_DEB_SDIO); } From 7f38e5bc93203bc76b215dcd2df2067b5b0e004c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 1 Aug 2012 15:58:43 -0500 Subject: [PATCH 0127/1098] brcmsmac: use channel flags to restrict OFDM brcmsmac cannot call freq_reg_info() during channel changes as it does not hold cfg80211_lock, and as a result it generates a lockdep warning. freq_reg_info() is being used to determine whether OFDM is allowed on the current channel, so we can avoid the errant call by using the new IEEE80211_CHAN_NO_OFDM for this purpose instead. Reported-by: Josh Boyer Signed-off-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 5 +---- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 3 ++- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 9a4c63f927cb..7ed7d7577024 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, { struct brcms_c_info *wlc = wlc_cm->wlc; struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; - const struct ieee80211_reg_rule *reg_rule; struct txpwr_limits txpwr; - int ret; brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr); @@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, ); /* set or restore gmode as required by regulatory */ - ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, ®_rule); - if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM)) + if (ch->flags & IEEE80211_CHAN_NO_OFDM) brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false); else brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 9e79d47e077f..192ad5c1fcc8 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = { IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(14, 2484, IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | + IEEE80211_CHAN_NO_OFDM) }; static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { From 3dd4765fce04c0b4af1e0bc4c0b10f906f95fabc Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 2 Aug 2012 14:30:56 -0400 Subject: [PATCH 0128/1098] nfs: tear down caches in nfs_init_writepagecache when allocation fails ...and ensure that we tear down the nfs_commit_data cache too when unloading the module. Cc: Bryan Schumaker Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 5829d0ce7cfb..e3b55372726c 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1814,19 +1814,19 @@ int __init nfs_init_writepagecache(void) nfs_wdata_mempool = mempool_create_slab_pool(MIN_POOL_WRITE, nfs_wdata_cachep); if (nfs_wdata_mempool == NULL) - return -ENOMEM; + goto out_destroy_write_cache; nfs_cdata_cachep = kmem_cache_create("nfs_commit_data", sizeof(struct nfs_commit_data), 0, SLAB_HWCACHE_ALIGN, NULL); if (nfs_cdata_cachep == NULL) - return -ENOMEM; + goto out_destroy_write_mempool; nfs_commit_mempool = mempool_create_slab_pool(MIN_POOL_COMMIT, nfs_wdata_cachep); if (nfs_commit_mempool == NULL) - return -ENOMEM; + goto out_destroy_commit_cache; /* * NFS congestion size, scale with available memory. @@ -1849,11 +1849,20 @@ int __init nfs_init_writepagecache(void) nfs_congestion_kb = 256*1024; return 0; + +out_destroy_commit_cache: + kmem_cache_destroy(nfs_cdata_cachep); +out_destroy_write_mempool: + mempool_destroy(nfs_wdata_mempool); +out_destroy_write_cache: + kmem_cache_destroy(nfs_wdata_cachep); + return -ENOMEM; } void nfs_destroy_writepagecache(void) { mempool_destroy(nfs_commit_mempool); + kmem_cache_destroy(nfs_cdata_cachep); mempool_destroy(nfs_wdata_mempool); kmem_cache_destroy(nfs_wdata_cachep); } From 8554116e17eef055d9dd58a94b3427cb2ad1c317 Mon Sep 17 00:00:00 2001 From: Idan Kedar Date: Thu, 2 Aug 2012 11:47:10 +0300 Subject: [PATCH 0129/1098] pnfs: defer release of pages in layoutget we have encountered a bug whereby reading a lot of files (copying fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused a general protection fault in xdr_shrink_bufhead. this function is called when decoding the response from LAYOUTGET. the decoding is done by a worker thread, and the caller of LAYOUTGET waits for the worker thread to complete. hitting Ctrl+C caused the synchronous wait to end and the next thing the caller does is to free the pages, so when the worker thread calls xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these pages has been moved to nfs4_layoutget_release. Signed-off-by: Idan Kedar Signed-off-by: Benny Halevy Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++- fs/nfs/pnfs.c | 39 +------------------------------- fs/nfs/pnfs.h | 2 +- 3 files changed, 58 insertions(+), 40 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index a99a8d948721..6a78d49da5c1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6223,11 +6223,58 @@ static void nfs4_layoutget_done(struct rpc_task *task, void *calldata) dprintk("<-- %s\n", __func__); } +static size_t max_response_pages(struct nfs_server *server) +{ + u32 max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; + return nfs_page_array_len(0, max_resp_sz); +} + +static void nfs4_free_pages(struct page **pages, size_t size) +{ + int i; + + if (!pages) + return; + + for (i = 0; i < size; i++) { + if (!pages[i]) + break; + __free_page(pages[i]); + } + kfree(pages); +} + +static struct page **nfs4_alloc_pages(size_t size, gfp_t gfp_flags) +{ + struct page **pages; + int i; + + pages = kcalloc(size, sizeof(struct page *), gfp_flags); + if (!pages) { + dprintk("%s: can't alloc array of %zu pages\n", __func__, size); + return NULL; + } + + for (i = 0; i < size; i++) { + pages[i] = alloc_page(gfp_flags); + if (!pages[i]) { + dprintk("%s: failed to allocate page\n", __func__); + nfs4_free_pages(pages, size); + return NULL; + } + } + + return pages; +} + static void nfs4_layoutget_release(void *calldata) { struct nfs4_layoutget *lgp = calldata; + struct nfs_server *server = NFS_SERVER(lgp->args.inode); + size_t max_pages = max_response_pages(server); dprintk("--> %s\n", __func__); + nfs4_free_pages(lgp->args.layout.pages, max_pages); put_nfs_open_context(lgp->args.ctx); kfree(calldata); dprintk("<-- %s\n", __func__); @@ -6239,9 +6286,10 @@ static const struct rpc_call_ops nfs4_layoutget_call_ops = { .rpc_release = nfs4_layoutget_release, }; -int nfs4_proc_layoutget(struct nfs4_layoutget *lgp) +int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) { struct nfs_server *server = NFS_SERVER(lgp->args.inode); + size_t max_pages = max_response_pages(server); struct rpc_task *task; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LAYOUTGET], @@ -6259,6 +6307,13 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp) dprintk("--> %s\n", __func__); + lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags); + if (!lgp->args.layout.pages) { + nfs4_layoutget_release(lgp); + return -ENOMEM; + } + lgp->args.layout.pglen = max_pages * PAGE_SIZE; + lgp->res.layoutp = &lgp->args.layout; lgp->res.seq_res.sr_slot = NULL; nfs41_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 76875bfcf19c..2e00feacd4be 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -583,9 +583,6 @@ send_layoutget(struct pnfs_layout_hdr *lo, struct nfs_server *server = NFS_SERVER(ino); struct nfs4_layoutget *lgp; struct pnfs_layout_segment *lseg = NULL; - struct page **pages = NULL; - int i; - u32 max_resp_sz, max_pages; dprintk("--> %s\n", __func__); @@ -594,20 +591,6 @@ send_layoutget(struct pnfs_layout_hdr *lo, if (lgp == NULL) return NULL; - /* allocate pages for xdr post processing */ - max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = nfs_page_array_len(0, max_resp_sz); - - pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags); - if (!pages) - goto out_err_free; - - for (i = 0; i < max_pages; i++) { - pages[i] = alloc_page(gfp_flags); - if (!pages[i]) - goto out_err_free; - } - lgp->args.minlength = PAGE_CACHE_SIZE; if (lgp->args.minlength > range->length) lgp->args.minlength = range->length; @@ -616,39 +599,19 @@ send_layoutget(struct pnfs_layout_hdr *lo, lgp->args.type = server->pnfs_curr_ld->id; lgp->args.inode = ino; lgp->args.ctx = get_nfs_open_context(ctx); - lgp->args.layout.pages = pages; - lgp->args.layout.pglen = max_pages * PAGE_SIZE; lgp->lsegpp = &lseg; lgp->gfp_flags = gfp_flags; /* Synchronously retrieve layout information from server and * store in lseg. */ - nfs4_proc_layoutget(lgp); + nfs4_proc_layoutget(lgp, gfp_flags); if (!lseg) { /* remember that LAYOUTGET failed and suspend trying */ set_bit(lo_fail_bit(range->iomode), &lo->plh_flags); } - /* free xdr pages */ - for (i = 0; i < max_pages; i++) - __free_page(pages[i]); - kfree(pages); - return lseg; - -out_err_free: - /* free any allocated xdr pages, lgp as it's not used */ - if (pages) { - for (i = 0; i < max_pages; i++) { - if (!pages[i]) - break; - __free_page(pages[i]); - } - kfree(pages); - } - kfree(lgp); - return NULL; } /* diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 2c6c80503ba4..5ea019e80b4c 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -172,7 +172,7 @@ extern int nfs4_proc_getdevicelist(struct nfs_server *server, struct pnfs_devicelist *devlist); extern int nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *dev); -extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp); +extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp); /* pnfs.c */ From 21d1f58aedc5f7ac4bb0c4e3d78c74ea31ac050f Mon Sep 17 00:00:00 2001 From: Idan Kedar Date: Thu, 2 Aug 2012 11:47:11 +0300 Subject: [PATCH 0130/1098] pnfs: nfs4_proc_layoutget returns void since the only user of nfs4_proc_layoutget is send_layoutget, which ignores its return value, there is no reason to return any value. Signed-off-by: Idan Kedar Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 8 ++++---- fs/nfs/pnfs.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6a78d49da5c1..f94f6b3928fc 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6286,7 +6286,7 @@ static const struct rpc_call_ops nfs4_layoutget_call_ops = { .rpc_release = nfs4_layoutget_release, }; -int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) +void nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) { struct nfs_server *server = NFS_SERVER(lgp->args.inode); size_t max_pages = max_response_pages(server); @@ -6310,7 +6310,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags); if (!lgp->args.layout.pages) { nfs4_layoutget_release(lgp); - return -ENOMEM; + return; } lgp->args.layout.pglen = max_pages * PAGE_SIZE; @@ -6319,7 +6319,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) nfs41_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0); task = rpc_run_task(&task_setup_data); if (IS_ERR(task)) - return PTR_ERR(task); + return; status = nfs4_wait_for_completion_rpc_task(task); if (status == 0) status = task->tk_status; @@ -6327,7 +6327,7 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags) status = pnfs_layout_process(lgp); rpc_put_task(task); dprintk("<-- %s status=%d\n", __func__, status); - return status; + return; } static void diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 5ea019e80b4c..745aa1b39e7c 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -172,7 +172,7 @@ extern int nfs4_proc_getdevicelist(struct nfs_server *server, struct pnfs_devicelist *devlist); extern int nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *dev); -extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); +extern void nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags); extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp); /* pnfs.c */ From f6166384095b7ecf77752b5e9096e6d03d75f7ae Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Thu, 2 Aug 2012 15:36:09 +0300 Subject: [PATCH 0131/1098] NFS41: add pg_layout_private to nfs_pageio_descriptor To allow layout driver to pass private information around pg_init/pg_doio. Signed-off-by: Peng Tao Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust --- fs/nfs/pagelist.c | 2 ++ include/linux/nfs_page.h | 1 + include/linux/nfs_xdr.h | 1 + 3 files changed, 4 insertions(+) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 1a6732ed04a4..311a79681e2b 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -49,6 +49,7 @@ void nfs_pgheader_init(struct nfs_pageio_descriptor *desc, hdr->io_start = req_offset(hdr->req); hdr->good_bytes = desc->pg_count; hdr->dreq = desc->pg_dreq; + hdr->layout_private = desc->pg_layout_private; hdr->release = release; hdr->completion_ops = desc->pg_completion_ops; if (hdr->completion_ops->init_hdr) @@ -268,6 +269,7 @@ void nfs_pageio_init(struct nfs_pageio_descriptor *desc, desc->pg_error = 0; desc->pg_lseg = NULL; desc->pg_dreq = NULL; + desc->pg_layout_private = NULL; } EXPORT_SYMBOL_GPL(nfs_pageio_init); diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 880805774f9f..92ce5783b707 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -69,6 +69,7 @@ struct nfs_pageio_descriptor { const struct nfs_pgio_completion_ops *pg_completion_ops; struct pnfs_layout_segment *pg_lseg; struct nfs_direct_req *pg_dreq; + void *pg_layout_private; }; #define NFS_WBACK_BUSY(req) (test_bit(PG_BUSY,&(req)->wb_flags)) diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 00485e084394..ac7c8ae254f2 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1248,6 +1248,7 @@ struct nfs_pgio_header { void (*release) (struct nfs_pgio_header *hdr); const struct nfs_pgio_completion_ops *completion_ops; struct nfs_direct_req *dreq; + void *layout_private; spinlock_t lock; /* fields protected by lock */ int pnfs_error; From 963ab9e5da95c654bb3ab937cc478de4f7088a96 Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 2 Aug 2012 23:42:03 +0200 Subject: [PATCH 0132/1098] block: Introduce __blk_segment_map_sg() helper Split the mapping code in blk_rq_map_sg() to a helper __blk_segment_map_sg(), so that other mapping function, e.g. blk_bio_map_sg(), can share the code. Cc: Rusty Russell Cc: Christoph Hellwig Cc: Tejun Heo Cc: Shaohua Li Cc: "Michael S. Tsirkin" Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Suggested-by: Jens Axboe Suggested-by: Tejun Heo Signed-off-by: Asias He Signed-off-by: Jens Axboe --- block/blk-merge.c | 80 ++++++++++++++++++++++++++--------------------- 1 file changed, 45 insertions(+), 35 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index 160035f54882..576b68e79248 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -110,6 +110,49 @@ static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio, return 0; } +static void +__blk_segment_map_sg(struct request_queue *q, struct bio_vec *bvec, + struct scatterlist *sglist, struct bio_vec **bvprv, + struct scatterlist **sg, int *nsegs, int *cluster) +{ + + int nbytes = bvec->bv_len; + + if (*bvprv && *cluster) { + if ((*sg)->length + nbytes > queue_max_segment_size(q)) + goto new_segment; + + if (!BIOVEC_PHYS_MERGEABLE(*bvprv, bvec)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, *bvprv, bvec)) + goto new_segment; + + (*sg)->length += nbytes; + } else { +new_segment: + if (!*sg) + *sg = sglist; + else { + /* + * If the driver previously mapped a shorter + * list, we could see a termination bit + * prematurely unless it fully inits the sg + * table on each mapping. We KNOW that there + * must be more entries here or the driver + * would be buggy, so force clear the + * termination bit to avoid doing a full + * sg_init_table() in drivers for each command. + */ + (*sg)->page_link &= ~0x02; + *sg = sg_next(*sg); + } + + sg_set_page(*sg, bvec->bv_page, nbytes, bvec->bv_offset); + (*nsegs)++; + } + *bvprv = bvec; +} + /* * map a request to scatterlist, return number of sg entries setup. Caller * must make sure sg can hold rq->nr_phys_segments entries @@ -131,41 +174,8 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, bvprv = NULL; sg = NULL; rq_for_each_segment(bvec, rq, iter) { - int nbytes = bvec->bv_len; - - if (bvprv && cluster) { - if (sg->length + nbytes > queue_max_segment_size(q)) - goto new_segment; - - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bvec)) - goto new_segment; - - sg->length += nbytes; - } else { -new_segment: - if (!sg) - sg = sglist; - else { - /* - * If the driver previously mapped a shorter - * list, we could see a termination bit - * prematurely unless it fully inits the sg - * table on each mapping. We KNOW that there - * must be more entries here or the driver - * would be buggy, so force clear the - * termination bit to avoid doing a full - * sg_init_table() in drivers for each command. - */ - sg->page_link &= ~0x02; - sg = sg_next(sg); - } - - sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset); - nsegs++; - } - bvprv = bvec; + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); } /* segments in rq */ From 85b9f66a41eb8ee3f1dfc95707412705463cdd97 Mon Sep 17 00:00:00 2001 From: Asias He Date: Thu, 2 Aug 2012 23:42:04 +0200 Subject: [PATCH 0133/1098] block: Add blk_bio_map_sg() helper Add a helper to map a bio to a scatterlist, modelled after blk_rq_map_sg. This helper is useful for any driver that wants to create a scatterlist from its ->make_request_fn method. Changes in v2: - Use __blk_segment_map_sg to avoid duplicated code - Add cocbook style function comment Cc: Rusty Russell Cc: Christoph Hellwig Cc: Tejun Heo Cc: Shaohua Li Cc: "Michael S. Tsirkin" Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Christoph Hellwig Signed-off-by: Minchan Kim Signed-off-by: Asias He Signed-off-by: Jens Axboe --- block/blk-merge.c | 37 +++++++++++++++++++++++++++++++++++++ include/linux/blkdev.h | 2 ++ 2 files changed, 39 insertions(+) diff --git a/block/blk-merge.c b/block/blk-merge.c index 576b68e79248..e76279e41162 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -209,6 +209,43 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, } EXPORT_SYMBOL(blk_rq_map_sg); +/** + * blk_bio_map_sg - map a bio to a scatterlist + * @q: request_queue in question + * @bio: bio being mapped + * @sglist: scatterlist being mapped + * + * Note: + * Caller must make sure sg can hold bio->bi_phys_segments entries + * + * Will return the number of sg entries setup + */ +int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist) +{ + struct bio_vec *bvec, *bvprv; + struct scatterlist *sg; + int nsegs, cluster; + unsigned long i; + + nsegs = 0; + cluster = blk_queue_cluster(q); + + bvprv = NULL; + sg = NULL; + bio_for_each_segment(bvec, bio, i) { + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); + } /* segments in bio */ + + if (sg) + sg_mark_end(sg); + + BUG_ON(bio->bi_phys_segments && nsegs > bio->bi_phys_segments); + return nsegs; +} +EXPORT_SYMBOL(blk_bio_map_sg); + static inline int ll_new_hw_segment(struct request_queue *q, struct request *req, struct bio *bio) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 281516ae8b4e..dc632975d54f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -894,6 +894,8 @@ extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); +extern int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist); extern void blk_dump_rq_flags(struct request *, char *); extern long nr_blockdev_pages(void); From 7de6e28417c65919cf2c1621841a650c4a3afbbd Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 2 Aug 2012 15:38:23 +0300 Subject: [PATCH 0134/1098] pnfs-obj: Better IO pattern in case of unaligned offset Depending on layout and ARCH, ORE has some limits on max IO sizes which is communicated on (what else) ore_layout->max_io_length, which is always stripe aligned. This was considered as the pg_test boundary for splitting and starting a new IO. But in the case of a long IO where the start offset is not aligned what would happen is that both end of IO[N] and start of IO[N+1] would be unaligned, causing each IO boundary parity unit to be calculated and written twice. So what we do in this patch is split the very start of an unaligned IO, up to a stripe boundary, and then next IO's can continue fully aligned til the end. We might be sacrificing the case where the full unaligned IO would fit within a single max_io_length, but the sacrifice is well worth the elimination of double calculation and parity units IO. Actually the sacrificing is marginal and is almost unmeasurable. TODO: If we know the total expected linear segment that will be received, at pg_init, we could use that information in many places: 1. blocks-layout get_layout write segment size 2. Better mds-threshold 3. In above situation for a better clean split I will do this in future submission. Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust --- fs/nfs/objlayout/objio_osd.c | 55 ++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 3 deletions(-) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index f50d3e8d6f22..ea6d111b03e9 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -570,17 +570,66 @@ static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, return false; return pgio->pg_count + req->wb_bytes <= - OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; + (unsigned long)pgio->pg_layout_private; +} + +void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +{ + pnfs_generic_pg_init_read(pgio, req); + if (unlikely(pgio->pg_lseg == NULL)) + return; /* Not pNFS */ + + pgio->pg_layout_private = (void *) + OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; +} + +static bool aligned_on_raid_stripe(u64 offset, struct ore_layout *layout, + unsigned long *stripe_end) +{ + u32 stripe_off; + unsigned stripe_size; + + if (layout->raid_algorithm == PNFS_OSD_RAID_0) + return true; + + stripe_size = layout->stripe_unit * + (layout->group_width - layout->parity); + + div_u64_rem(offset, stripe_size, &stripe_off); + if (!stripe_off) + return true; + + *stripe_end = stripe_size - stripe_off; + return false; +} + +void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req) +{ + unsigned long stripe_end = 0; + + pnfs_generic_pg_init_write(pgio, req); + if (unlikely(pgio->pg_lseg == NULL)) + return; /* Not pNFS */ + + if (req->wb_offset || + !aligned_on_raid_stripe(req->wb_index * PAGE_SIZE, + &OBJIO_LSEG(pgio->pg_lseg)->layout, + &stripe_end)) { + pgio->pg_layout_private = (void *)stripe_end; + } else { + pgio->pg_layout_private = (void *) + OBJIO_LSEG(pgio->pg_lseg)->layout.max_io_length; + } } static const struct nfs_pageio_ops objio_pg_read_ops = { - .pg_init = pnfs_generic_pg_init_read, + .pg_init = objio_init_read, .pg_test = objio_pg_test, .pg_doio = pnfs_generic_pg_readpages, }; static const struct nfs_pageio_ops objio_pg_write_ops = { - .pg_init = pnfs_generic_pg_init_write, + .pg_init = objio_init_write, .pg_test = objio_pg_test, .pg_doio = pnfs_generic_pg_writepages, }; From 9e2760d18b3cf179534bbc27692c84879c61b97c Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sat, 28 Jul 2012 00:20:34 +0200 Subject: [PATCH 0135/1098] m68k: Make sys_atomic_cmpxchg_32 work on classic m68k User space access must always go through uaccess accessors, since on classic m68k user space and kernel space are completely separate. Signed-off-by: Andreas Schwab Tested-by: Thorsten Glaser Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org --- arch/m68k/kernel/sys_m68k.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 8623f8dc16f8..9a5932ec3689 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, goto bad_access; } - mem_value = *mem; + /* + * No need to check for EFAULT; we know that the page is + * present and writable. + */ + __get_user(mem_value, mem); if (mem_value == oldval) - *mem = newval; + __put_user(newval, mem); pte_unmap_unlock(pte, ptl); up_read(&mm->mmap_sem); From 7405ed10f6adcdd556d59c360b5b216fccada3d9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 2 Aug 2012 21:01:17 -0300 Subject: [PATCH 0136/1098] perf session: Remove no longer used synthesize_sample method Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-jd8tqbx8o8bs4t4g50vyhoc2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 8 -------- tools/perf/util/session.h | 4 ---- 2 files changed, 12 deletions(-) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 7d07324db41c..2437fb0b463a 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -16,14 +16,6 @@ #include "cpumap.h" #include "event-parse.h" -int perf_session__synthesize_sample(struct perf_session *session, - union perf_event *event, - const struct perf_sample *sample) -{ - return perf_event__synthesize_sample(event, perf_evlist__sample_type(session->evlist), - sample, session->header.needs_swap); -} - static int perf_session__open(struct perf_session *self, bool force) { struct stat input_stat; diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 7389fb1f010a..1f7ec87db7d7 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -126,10 +126,6 @@ size_t perf_session__fprintf_dsos_buildid(struct perf_session *self, size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp); -int perf_session__synthesize_sample(struct perf_session *session, - union perf_event *event, - const struct perf_sample *sample); - struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, unsigned int type); From f3946fb6e50b750d34f445188fa6746d14596afa Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 31 Jul 2012 17:41:08 +0200 Subject: [PATCH 0137/1098] ACPI: Untangle a return statement for better readability No functional change. Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/numa.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index e56f3be7b07d..2a6399345c85 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -304,8 +304,10 @@ int __init acpi_numa_init(void) acpi_numa_arch_fixup(); - if (cnt <= 0) - return cnt ?: -ENOENT; + if (cnt < 0) + return cnt; + else if (cnt == 0) + return -ENOENT; return 0; } From 095adbb6441172985f5ddc3b9e88cb3191bdeac4 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 31 Jul 2012 17:41:09 +0200 Subject: [PATCH 0138/1098] ACPI: Only count valid srat memory structures Otherwise you could run into: WARN_ON in numa_register_memblks(), because node_possible_map is zero References: https://bugzilla.novell.com/show_bug.cgi?id=757888 On this machine (ProLiant ML570 G3) the SRAT table contains: - No processor affinities - One memory affinity structure (which is set disabled) CC: Per Jessen CC: Andi Kleen Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 5 +++-- arch/x86/mm/srat.c | 15 ++++++++------- drivers/acpi/numa.c | 8 +++++--- include/linux/acpi.h | 2 +- 4 files changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 6f38b6120d96..440578850ae5 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -497,7 +497,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) srat_num_cpus++; } -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { unsigned long paddr, size; @@ -512,7 +512,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) /* Ignore disabled entries */ if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) - return; + return -1; /* record this node in proximity bitmap */ pxm_bit_set(pxm); @@ -531,6 +531,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) p->size = size; p->nid = pxm; num_node_memblks++; + return 0; } void __init acpi_numa_arch_fixup(void) diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 4599c3e8bcb6..4ddf497ca65b 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -142,23 +142,23 @@ static inline int save_add_info(void) {return 0;} #endif /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { u64 start, end; int node, pxm; if (srat_disabled()) - return; + return -1; if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { bad_srat(); - return; + return -1; } if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; + return -1; if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) - return; + return -1; start = ma->base_address; end = start + ma->length; pxm = ma->proximity_domain; @@ -168,12 +168,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains.\n"); bad_srat(); - return; + return -1; } if (numa_add_memblk(node, start, end) < 0) { bad_srat(); - return; + return -1; } node_set(node, numa_nodes_parsed); @@ -181,6 +181,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n", node, pxm, (unsigned long long) start, (unsigned long long) end - 1); + return 0; } void __init acpi_numa_arch_fixup(void) {} diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 2a6399345c85..cb31298ca684 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -237,6 +237,8 @@ acpi_parse_processor_affinity(struct acpi_subtable_header *header, return 0; } +static int __initdata parsed_numa_memblks; + static int __init acpi_parse_memory_affinity(struct acpi_subtable_header * header, const unsigned long end) @@ -250,8 +252,8 @@ acpi_parse_memory_affinity(struct acpi_subtable_header * header, acpi_table_print_srat_entry(header); /* let architecture-dependent part to do it */ - acpi_numa_memory_affinity_init(memory_affinity); - + if (!acpi_numa_memory_affinity_init(memory_affinity)) + parsed_numa_memblks++; return 0; } @@ -306,7 +308,7 @@ int __init acpi_numa_init(void) if (cnt < 0) return cnt; - else if (cnt == 0) + else if (!parsed_numa_memblks) return -ENOENT; return 0; } diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3ad510b25283..4f2a76224509 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -96,7 +96,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); void acpi_numa_slit_init (struct acpi_table_slit *slit); void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); -void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); +int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); void acpi_numa_arch_fixup(void); #ifdef CONFIG_ACPI_HOTPLUG_CPU From b7db60f45d74497c723dc7ae1370cf0b37dfb0d8 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 31 Jul 2012 12:44:43 +0800 Subject: [PATCH 0139/1098] ACPI processor: Fix tick_broadcast_mask online/offline regression In commit 99b725084 "ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores", acpi_processor_hotplug(pr) was wrongly replaced by acpi_processor_cst_has_changed() inside the acpi_cpu_soft_notify(). This patch will restore it back, fixing the tick_broadcast_mask regression: https://lkml.org/lkml/2012/7/30/169 Signed-off-by: Feng Tang Cc: Thomas Renninger Cc: # 3.3+ Reviewed-by: Rafael J. Wysocki Reviewed-by: Deepthi Dharwar Signed-off-by: Len Brown --- drivers/acpi/processor_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 0734086537b8..bbac51e79d1f 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -442,7 +442,7 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb, /* Normal CPU soft online event */ } else { acpi_processor_ppc_has_changed(pr, 0); - acpi_processor_cst_has_changed(pr); + acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } From e2b34fa0466500de7814fc4e492689cee5ac120b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 27 Jul 2012 07:53:02 +1000 Subject: [PATCH 0140/1098] drm/nve0/fifo: add support for the flip completion swmthd Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nve0_fifo.c | 37 +++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nve0_fifo.c b/drivers/gpu/drm/nouveau/nve0_fifo.c index 1855ecbd843b..e98d144e6eb9 100644 --- a/drivers/gpu/drm/nouveau/nve0_fifo.c +++ b/drivers/gpu/drm/nouveau/nve0_fifo.c @@ -294,6 +294,25 @@ nve0_fifo_isr_vm_fault(struct drm_device *dev, int unit) printk(" on channel 0x%010llx\n", (u64)inst << 12); } +static int +nve0_fifo_page_flip(struct drm_device *dev, u32 chid) +{ + struct nve0_fifo_priv *priv = nv_engine(dev, NVOBJ_ENGINE_FIFO); + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_channel *chan = NULL; + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&dev_priv->channels.lock, flags); + if (likely(chid >= 0 && chid < priv->base.channels)) { + chan = dev_priv->channels.ptr[chid]; + if (likely(chan)) + ret = nouveau_finish_page_flip(chan, NULL); + } + spin_unlock_irqrestore(&dev_priv->channels.lock, flags); + return ret; +} + static void nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) { @@ -303,11 +322,21 @@ nve0_fifo_isr_subfifo_intr(struct drm_device *dev, int unit) u32 chid = nv_rd32(dev, 0x040120 + (unit * 0x2000)) & 0x7f; u32 subc = (addr & 0x00070000); u32 mthd = (addr & 0x00003ffc); + u32 show = stat; - NV_INFO(dev, "PSUBFIFO %d:", unit); - nouveau_bitfield_print(nve0_fifo_subfifo_intr, stat); - NV_INFO(dev, "PSUBFIFO %d: ch %d subc %d mthd 0x%04x data 0x%08x\n", - unit, chid, subc, mthd, data); + if (stat & 0x00200000) { + if (mthd == 0x0054) { + if (!nve0_fifo_page_flip(dev, chid)) + show &= ~0x00200000; + } + } + + if (show) { + NV_INFO(dev, "PFIFO%d:", unit); + nouveau_bitfield_print(nve0_fifo_subfifo_intr, show); + NV_INFO(dev, "PFIFO%d: ch %d subc %d mthd 0x%04x data 0x%08x\n", + unit, chid, subc, mthd, data); + } nv_wr32(dev, 0x0400c0 + (unit * 0x2000), 0x80600008); nv_wr32(dev, 0x040108 + (unit * 0x2000), stat); From 1f3f7eceff47f9e320ca67b3e9f16fb295106514 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 25 Jun 2012 13:36:14 +0530 Subject: [PATCH 0141/1098] usb: musb: Fix wrong config for am33xx and ti81xx Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX and TI81XX as shown below CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX So updating the same at musb driver for AM33XX and TI81XX platforms. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index ef0c3f9f0947..6259f0d99324 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -8,7 +8,7 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) + select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS @@ -57,7 +57,7 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX + depends on SOC_TI81XX || SOC_AM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" From 3bb5534853dbb1e445a9b26ecab8ad331ff14a7e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 3 Jul 2012 17:37:10 +0530 Subject: [PATCH 0142/1098] usb: musb: am335x: fix pdev resource bug We are overwriting the resource->name to "mc" so that musb_core.c can understand it but this is also changing the platform device's resource->name as the "name" address remains same. Fixing the same by changing the resource->name field of local structure only. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 217808d9fbe1..dabe7b63654f 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -479,9 +479,9 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) ret = -ENODEV; goto err0; } - strcpy((u8 *)res->name, "mc"); res->parent = NULL; resources[1] = *res; + resources[1].name = "mc"; /* allocate the child platform device */ musb = platform_device_alloc("musb-hdrc", -1); From 0e38c4ed83027e7e7d16568e43fb34a32c14f800 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 3 Jul 2012 17:37:11 +0530 Subject: [PATCH 0143/1098] usb: musb: reorder runtime pm call The clock need to be enabled before the musb_core platform device is created and registered. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index dabe7b63654f..494772fc9e23 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -566,27 +566,28 @@ static int __devinit dsps_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, glue); - /* create the child platform device for first instances of musb */ - ret = dsps_create_musb_pdev(glue, 0); - if (ret != 0) { - dev_err(&pdev->dev, "failed to create child pdev\n"); - goto err2; - } - /* enable the usbss clocks */ pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); + goto err2; + } + + /* create the child platform device for first instances of musb */ + ret = dsps_create_musb_pdev(glue, 0); + if (ret != 0) { + dev_err(&pdev->dev, "failed to create child pdev\n"); goto err3; } return 0; err3: - pm_runtime_disable(&pdev->dev); + pm_runtime_put(&pdev->dev); err2: + pm_runtime_disable(&pdev->dev); kfree(glue->wrp); err1: kfree(glue); From 0676806707281e27b13d44323bed580a8160b7a4 Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Fri, 3 Aug 2012 10:42:00 +0200 Subject: [PATCH 0144/1098] block: Don't use static to define "void *p" in show_partition_start() I met a odd prblem:read /proc/partitions may return zero. I wrote a file test.c: int main() { char buff[4096]; int ret; int fd; printf("pid=%d\n",getpid()); while (1) { fd = open("/proc/partitions", O_RDONLY); if (fd < 0) { printf("open error %s\n", strerror(errno)); return 0; } ret = read(fd, buff, 4096); if (ret <= 0) printf("ret=%d, %s, %ld\n", ret, strerror(errno), lseek(fd,0,SEEK_CUR)); close(fd); } exit(0); } You can reproduce by: 1:while true;do cat /proc/partitions > /dev/null ;done 2:./test I reviewed the code and found: >> static void *show_partition_start(struct seq_file *seqf, loff_t *pos) >> { >> static void *p; >> >> p = disk_seqf_start(seqf, pos); >> if (!IS_ERR_OR_NULL(p) && !*pos) >> seq_puts(seqf, "major minor #blocks name\n\n"); >> return p; >> } test cat /proc/partitions p = disk_seqf_start()(Not NULL) p = disk_seqf_start()(NULL because pos) if (!IS_ERR_OR_NULL(p) && !*pos) Signed-off-by: Jianpeng Ma Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/genhd.c b/block/genhd.c index cac7366957c3..d839723303c8 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -835,7 +835,7 @@ static void disk_seqf_stop(struct seq_file *seqf, void *v) static void *show_partition_start(struct seq_file *seqf, loff_t *pos) { - static void *p; + void *p; p = disk_seqf_start(seqf, pos); if (!IS_ERR_OR_NULL(p) && !*pos) From 5b24c421621792fcc588af6f644d6acf2dd798cc Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 2 Aug 2012 15:33:59 +0200 Subject: [PATCH 0145/1098] [PARISC] fix personality flag check in copy_thread() Directly comparing task_struct->personality against PER_* is not fully correct, as it doesn't take flags potentially stored in top three bytes into account. Analogically, directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes. Signed-off-by: Jiri Kosina Signed-off-by: James Bottomley --- arch/parisc/kernel/process.c | 2 +- arch/parisc/kernel/sys_parisc.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index d4b94b395c16..2c05a9292a81 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, cregs->ksp = (unsigned long)stack + (pregs->gr[21] & (THREAD_SIZE - 1)); cregs->gr[30] = usp; - if (p->personality == PER_HPUX) { + if (personality(p->personality) == PER_HPUX) { #ifdef CONFIG_HPUX cregs->kpc = (unsigned long) &hpux_child_return; #else diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index c9b932260f47..7426e40699bd 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality) long err; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; err = sys_personality(personality); - if (err == PER_LINUX32) - err = PER_LINUX; + if (personality(err) == PER_LINUX32) + err = (err & ~PER_MASK) | PER_LINUX; return err; } From c810f9039f040681ec9d9f2983b748c193037297 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 3 Aug 2012 12:48:32 +0200 Subject: [PATCH 0146/1098] ALSA: PCM: Fix possible memory leaks in the error path When the first page allocation failed for sgbuf, it leaks the records that have been formerly allocated. Signed-off-by: Takashi Iwai --- sound/core/sgbuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/sgbuf.c b/sound/core/sgbuf.c index 4e7ec2b49873..d0f00356fc11 100644 --- a/sound/core/sgbuf.c +++ b/sound/core/sgbuf.c @@ -101,7 +101,7 @@ void *snd_malloc_sgbuf_pages(struct device *device, if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, device, chunk, &tmpb) < 0) { if (!sgbuf->pages) - return NULL; + goto _failed; if (!res_size) goto _failed; size = sgbuf->pages * PAGE_SIZE; From fcfb7866af9a5d0280b7e51dd772990c636b7dec Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 3 Aug 2012 12:51:21 +0200 Subject: [PATCH 0147/1098] ALSA: emu10k1: Avoid access to invalid pages when period=1 When period=1, the driver tries to allocate a bit bigger buffer than requested by the user due to the irq latency tolerance. This may lead to accesses over the actually allocated pages. This patch adds a check of the page index and assigns the silent page when it's over the given buffer size. Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/memory.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/emu10k1/memory.c b/sound/pci/emu10k1/memory.c index 4f502a2bdc3c..0a436626182b 100644 --- a/sound/pci/emu10k1/memory.c +++ b/sound/pci/emu10k1/memory.c @@ -326,7 +326,10 @@ snd_emu10k1_alloc_pages(struct snd_emu10k1 *emu, struct snd_pcm_substream *subst for (page = blk->first_page; page <= blk->last_page; page++, idx++) { unsigned long ofs = idx << PAGE_SHIFT; dma_addr_t addr; - addr = snd_pcm_sgbuf_get_addr(substream, ofs); + if (ofs >= runtime->dma_bytes) + addr = emu->silent_page.addr; + else + addr = snd_pcm_sgbuf_get_addr(substream, ofs); if (! is_valid_page(emu, addr)) { printk(KERN_ERR "emu: failure page = %d\n", idx); mutex_unlock(&hdr->block_mutex); From 97a7dab42355d1332deef27c18b26cbeb3a2262b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 1 Aug 2012 22:11:08 -0300 Subject: [PATCH 0148/1098] ARM: imx6q-sabrelite: Setup CLKO IOMUX In order to have audio functional on mx6qsabrelite, it is necessary to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides the audio clock. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb97..72f30f3e6171 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; From 640bf0607c110b0be4da04b9d480bf0aad9de772 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 21:29:18 -0300 Subject: [PATCH 0149/1098] ARM: mx23: Fix registers range Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23.dtsi | 52 ++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae6..e6138310e5ce 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; From 0f06cde7347bff81a92395693ef977dc92756028 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 21:29:19 -0300 Subject: [PATCH 0150/1098] ARM: mx28: Fix registers range Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 74 ++++++++++++++++++------------------ 1 file changed, 37 insertions(+), 37 deletions(-) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da8..3fa6d190fab4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; From c9f11c30374329a0d2a88cf05281ca49d8eca9ab Mon Sep 17 00:00:00 2001 From: Jia Hongtao Date: Fri, 3 Aug 2012 18:14:09 +0800 Subject: [PATCH 0151/1098] powerpc/fsl-pci: Only scan PCI bus if configured as a host We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a4..c37f46136321 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } From 1a31fc904f1c897e4aaf7c3176e6aafa49f5d395 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 29 Jul 2012 20:53:03 -0600 Subject: [PATCH 0152/1098] perf top: Error handling for counter creation should parallel perf-record 5a7ed29 fixed up perf-record but not perf-top. Similar argument holds for it -- fallback to PMU only if it does not exist and handle invalid attributes separately. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Robert Richter Link: http://lkml.kernel.org/r/1343616783-6360-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 40264eaa9f0f..34096275a7b5 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -943,8 +943,10 @@ try_again: * based cpu-clock-tick sw counter, which * is always available even if no PMU support: */ - if (attr->type == PERF_TYPE_HARDWARE && - attr->config == PERF_COUNT_HW_CPU_CYCLES) { + if ((err == ENOENT || err == ENXIO) && + (attr->type == PERF_TYPE_HARDWARE) && + (attr->config == PERF_COUNT_HW_CPU_CYCLES)) { + if (verbose) ui__warning("Cycles event not supported,\n" "trying to fall back to cpu-clock-ticks\n"); From 56e6f602aa4432f7fe90a0d9ba379b2735b07b6b Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 29 Jul 2012 20:53:51 -0600 Subject: [PATCH 0153/1098] perf tool: Save cmdline from user in file header vs what is passed to record A number of builtin commands process some user args and then pass the rest to cmd_record. cmd_record then saves argc/argv that it receives into the header of the perf data file. But this loses the arguments handled by the first command -- ie., the real command line from the user. This patch saves the command line as typed by the user rather than what was passed to cmd_record. As an example consider the command: $ perf kvm --guest --host --guestmount=/tmp/guest-mount record -fo /tmp/perf.data -ag -- sleep 10 Currently the command saved to the header is: cmdline : /tmp/p3.5/perf record -o perf.data.kvm -fo /tmp/perf.data -ag -- sleep 1 (ignore the duplicated -o -- the first would be yet another bug with perf-kvm). With this patch the command line saved to the header is: cmdline : /tmp/p3.5/perf kvm --guest --host --guestmount=/tmp/guest-mount record -fo /tmp/perf.data -ag -- sleep 1 v2: simplified to saving the command in parse_options per Stephane's suggestion Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1343616831-6408-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 2 -- tools/perf/util/header.c | 9 +++++++++ tools/perf/util/parse-options.c | 3 +++ 3 files changed, 12 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index dc2b62565aa1..4db6e1ba54e3 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -844,8 +844,6 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) struct perf_record *rec = &record; char errbuf[BUFSIZ]; - perf_header__set_cmdline(argc, argv); - evsel_list = perf_evlist__new(NULL, NULL); if (evsel_list == NULL) return -ENOMEM; diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 3a6d20443330..74ea3c2f8138 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -174,6 +174,15 @@ perf_header__set_cmdline(int argc, const char **argv) { int i; + /* + * If header_argv has already been set, do not override it. + * This allows a command to set the cmdline, parse args and + * then call another builtin function that implements a + * command -- e.g, cmd_kvm calling cmd_record. + */ + if (header_argv) + return 0; + header_argc = (u32)argc; /* do not include NULL termination */ diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c index 99d02aa57dbf..594f8fad5ecd 100644 --- a/tools/perf/util/parse-options.c +++ b/tools/perf/util/parse-options.c @@ -1,6 +1,7 @@ #include "util.h" #include "parse-options.h" #include "cache.h" +#include "header.h" #define OPT_SHORT 1 #define OPT_UNSET 2 @@ -413,6 +414,8 @@ int parse_options(int argc, const char **argv, const struct option *options, { struct parse_opt_ctx_t ctx; + perf_header__set_cmdline(argc, argv); + parse_options_start(&ctx, argc, argv, flags); switch (parse_options_step(&ctx, options, usagestr)) { case PARSE_OPT_HELP: From 347ed9903a10179d1cf733d5d77072b283d89da3 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 29 Jul 2012 20:54:35 -0600 Subject: [PATCH 0154/1098] perf kvm: Use strtol for walking guestmount directory Only want to process directories under the guestmnount directory that have a pid as a name (ie, all digits). Other entries in the guestmount directory should be ignored. There is already a check that requires the first character of each entry to be a digit, but atoi is used to convert the directory name to a pid. For example if guestmount contains a directory with the name 1foo, atoi converts it to a pid of 1 and a machine is created with a pid of 1. This is wrong; this directory really should be ignored. Use strtol to do that. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343616875-6455-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index fe86612afadc..8b63b678e127 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -2875,6 +2875,7 @@ int machines__create_guest_kernel_maps(struct rb_root *machines) int i, items = 0; char path[PATH_MAX]; pid_t pid; + char *endp; if (symbol_conf.default_guest_vmlinux_name || symbol_conf.default_guest_modules || @@ -2891,7 +2892,14 @@ int machines__create_guest_kernel_maps(struct rb_root *machines) /* Filter out . and .. */ continue; } - pid = atoi(namelist[i]->d_name); + pid = (pid_t)strtol(namelist[i]->d_name, &endp, 10); + if ((*endp != '\0') || + (endp == namelist[i]->d_name) || + (errno == ERANGE)) { + pr_debug("invalid directory (%s). Skipping.\n", + namelist[i]->d_name); + continue; + } sprintf(path, "%s/%s/proc/kallsyms", symbol_conf.guestmount, namelist[i]->d_name); From 37bbd3fff1480a1f5d57abb9e9e56f468954c1b1 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 30 Jul 2012 22:31:32 -0600 Subject: [PATCH 0155/1098] perf tools: Introducing rblist rblist is the rbtree based code from strlist. It will be the common code for strlist and the to-be-introduced intlist. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343709095-7089-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 2 + tools/perf/util/rblist.c | 107 +++++++++++++++++++++++++++++++++++++++ tools/perf/util/rblist.h | 47 +++++++++++++++++ 3 files changed, 156 insertions(+) create mode 100644 tools/perf/util/rblist.c create mode 100644 tools/perf/util/rblist.h diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 77f124fe57ad..285f700a7836 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -319,6 +319,7 @@ LIB_H += $(ARCH_INCLUDE) LIB_H += util/cgroup.h LIB_H += $(TRACE_EVENT_DIR)event-parse.h LIB_H += util/target.h +LIB_H += util/rblist.h LIB_OBJS += $(OUTPUT)util/abspath.o LIB_OBJS += $(OUTPUT)util/alias.o @@ -383,6 +384,7 @@ LIB_OBJS += $(OUTPUT)util/xyarray.o LIB_OBJS += $(OUTPUT)util/cpumap.o LIB_OBJS += $(OUTPUT)util/cgroup.o LIB_OBJS += $(OUTPUT)util/target.o +LIB_OBJS += $(OUTPUT)util/rblist.o BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o diff --git a/tools/perf/util/rblist.c b/tools/perf/util/rblist.c new file mode 100644 index 000000000000..0171fb611004 --- /dev/null +++ b/tools/perf/util/rblist.c @@ -0,0 +1,107 @@ +/* + * Based on strlist.c by: + * (c) 2009 Arnaldo Carvalho de Melo + * + * Licensed under the GPLv2. + */ + +#include +#include +#include + +#include "rblist.h" + +int rblist__add_node(struct rblist *rblist, const void *new_entry) +{ + struct rb_node **p = &rblist->entries.rb_node; + struct rb_node *parent = NULL, *new_node; + + while (*p != NULL) { + int rc; + + parent = *p; + + rc = rblist->node_cmp(parent, new_entry); + if (rc > 0) + p = &(*p)->rb_left; + else if (rc < 0) + p = &(*p)->rb_right; + else + return -EEXIST; + } + + new_node = rblist->node_new(rblist, new_entry); + if (new_node == NULL) + return -ENOMEM; + + rb_link_node(new_node, parent, p); + rb_insert_color(new_node, &rblist->entries); + ++rblist->nr_entries; + + return 0; +} + +void rblist__remove_node(struct rblist *rblist, struct rb_node *rb_node) +{ + rb_erase(rb_node, &rblist->entries); + rblist->node_delete(rblist, rb_node); +} + +struct rb_node *rblist__find(struct rblist *rblist, const void *entry) +{ + struct rb_node **p = &rblist->entries.rb_node; + struct rb_node *parent = NULL; + + while (*p != NULL) { + int rc; + + parent = *p; + + rc = rblist->node_cmp(parent, entry); + if (rc > 0) + p = &(*p)->rb_left; + else if (rc < 0) + p = &(*p)->rb_right; + else + return parent; + } + + return NULL; +} + +void rblist__init(struct rblist *rblist) +{ + if (rblist != NULL) { + rblist->entries = RB_ROOT; + rblist->nr_entries = 0; + } + + return; +} + +void rblist__delete(struct rblist *rblist) +{ + if (rblist != NULL) { + struct rb_node *pos, *next = rb_first(&rblist->entries); + + while (next) { + pos = next; + next = rb_next(pos); + rb_erase(pos, &rblist->entries); + rblist->node_delete(rblist, pos); + } + free(rblist); + } +} + +struct rb_node *rblist__entry(const struct rblist *rblist, unsigned int idx) +{ + struct rb_node *node; + + for (node = rb_first(&rblist->entries); node; node = rb_next(node)) { + if (!idx--) + return node; + } + + return NULL; +} diff --git a/tools/perf/util/rblist.h b/tools/perf/util/rblist.h new file mode 100644 index 000000000000..6d0cae5ae83d --- /dev/null +++ b/tools/perf/util/rblist.h @@ -0,0 +1,47 @@ +#ifndef __PERF_RBLIST_H +#define __PERF_RBLIST_H + +#include +#include + +/* + * create node structs of the form: + * struct my_node { + * struct rb_node rb_node; + * ... my data ... + * }; + * + * create list structs of the form: + * struct mylist { + * struct rblist rblist; + * ... my data ... + * }; + */ + +struct rblist { + struct rb_root entries; + unsigned int nr_entries; + + int (*node_cmp)(struct rb_node *rbn, const void *entry); + struct rb_node *(*node_new)(struct rblist *rlist, const void *new_entry); + void (*node_delete)(struct rblist *rblist, struct rb_node *rb_node); +}; + +void rblist__init(struct rblist *rblist); +void rblist__delete(struct rblist *rblist); +int rblist__add_node(struct rblist *rblist, const void *new_entry); +void rblist__remove_node(struct rblist *rblist, struct rb_node *rb_node); +struct rb_node *rblist__find(struct rblist *rblist, const void *entry); +struct rb_node *rblist__entry(const struct rblist *rblist, unsigned int idx); + +static inline bool rblist__empty(const struct rblist *rblist) +{ + return rblist->nr_entries == 0; +} + +static inline unsigned int rblist__nr_entries(const struct rblist *rblist) +{ + return rblist->nr_entries; +} + +#endif /* __PERF_RBLIST_H */ From ee8dd3ca43f151d9fbe1edeef68fb8a77eb9f047 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 30 Jul 2012 22:31:33 -0600 Subject: [PATCH 0156/1098] perf tools: Change strlist to use the new rblist Replaces the direct use of rbtree code with the rblist API. In the end the patch is a no-op on strlist functionality; the API for strlist is not changed, only its implementaton. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343709095-7089-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/strlist.c | 132 +++++++++++++++----------------------- tools/perf/util/strlist.h | 11 ++-- 2 files changed, 58 insertions(+), 85 deletions(-) diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c index 6783a2043555..95856ff3dda4 100644 --- a/tools/perf/util/strlist.c +++ b/tools/perf/util/strlist.c @@ -10,23 +10,28 @@ #include #include -static struct str_node *str_node__new(const char *s, bool dupstr) +static +struct rb_node *strlist__node_new(struct rblist *rblist, const void *entry) { - struct str_node *self = malloc(sizeof(*self)); + const char *s = entry; + struct rb_node *rc = NULL; + struct strlist *strlist = container_of(rblist, struct strlist, rblist); + struct str_node *snode = malloc(sizeof(*snode)); - if (self != NULL) { - if (dupstr) { + if (snode != NULL) { + if (strlist->dupstr) { s = strdup(s); if (s == NULL) goto out_delete; } - self->s = s; + snode->s = s; + rc = &snode->rb_node; } - return self; + return rc; out_delete: - free(self); + free(snode); return NULL; } @@ -37,36 +42,26 @@ static void str_node__delete(struct str_node *self, bool dupstr) free(self); } +static +void strlist__node_delete(struct rblist *rblist, struct rb_node *rb_node) +{ + struct strlist *slist = container_of(rblist, struct strlist, rblist); + struct str_node *snode = container_of(rb_node, struct str_node, rb_node); + + str_node__delete(snode, slist->dupstr); +} + +static int strlist__node_cmp(struct rb_node *rb_node, const void *entry) +{ + const char *str = entry; + struct str_node *snode = container_of(rb_node, struct str_node, rb_node); + + return strcmp(snode->s, str); +} + int strlist__add(struct strlist *self, const char *new_entry) { - struct rb_node **p = &self->entries.rb_node; - struct rb_node *parent = NULL; - struct str_node *sn; - - while (*p != NULL) { - int rc; - - parent = *p; - sn = rb_entry(parent, struct str_node, rb_node); - rc = strcmp(sn->s, new_entry); - - if (rc > 0) - p = &(*p)->rb_left; - else if (rc < 0) - p = &(*p)->rb_right; - else - return -EEXIST; - } - - sn = str_node__new(new_entry, self->dupstr); - if (sn == NULL) - return -ENOMEM; - - rb_link_node(&sn->rb_node, parent, p); - rb_insert_color(&sn->rb_node, &self->entries); - ++self->nr_entries; - - return 0; + return rblist__add_node(&self->rblist, new_entry); } int strlist__load(struct strlist *self, const char *filename) @@ -96,34 +91,20 @@ out: return err; } -void strlist__remove(struct strlist *self, struct str_node *sn) +void strlist__remove(struct strlist *slist, struct str_node *snode) { - rb_erase(&sn->rb_node, &self->entries); - str_node__delete(sn, self->dupstr); + str_node__delete(snode, slist->dupstr); } -struct str_node *strlist__find(struct strlist *self, const char *entry) +struct str_node *strlist__find(struct strlist *slist, const char *entry) { - struct rb_node **p = &self->entries.rb_node; - struct rb_node *parent = NULL; + struct str_node *snode = NULL; + struct rb_node *rb_node = rblist__find(&slist->rblist, entry); - while (*p != NULL) { - struct str_node *sn; - int rc; + if (rb_node) + snode = container_of(rb_node, struct str_node, rb_node); - parent = *p; - sn = rb_entry(parent, struct str_node, rb_node); - rc = strcmp(sn->s, entry); - - if (rc > 0) - p = &(*p)->rb_left; - else if (rc < 0) - p = &(*p)->rb_right; - else - return sn; - } - - return NULL; + return snode; } static int strlist__parse_list_entry(struct strlist *self, const char *s) @@ -156,9 +137,12 @@ struct strlist *strlist__new(bool dupstr, const char *slist) struct strlist *self = malloc(sizeof(*self)); if (self != NULL) { - self->entries = RB_ROOT; + rblist__init(&self->rblist); + self->rblist.node_cmp = strlist__node_cmp; + self->rblist.node_new = strlist__node_new; + self->rblist.node_delete = strlist__node_delete; + self->dupstr = dupstr; - self->nr_entries = 0; if (slist && strlist__parse_list(self, slist) != 0) goto out_error; } @@ -171,30 +155,18 @@ out_error: void strlist__delete(struct strlist *self) { - if (self != NULL) { - struct str_node *pos; - struct rb_node *next = rb_first(&self->entries); - - while (next) { - pos = rb_entry(next, struct str_node, rb_node); - next = rb_next(&pos->rb_node); - strlist__remove(self, pos); - } - self->entries = RB_ROOT; - free(self); - } + if (self != NULL) + rblist__delete(&self->rblist); } -struct str_node *strlist__entry(const struct strlist *self, unsigned int idx) +struct str_node *strlist__entry(const struct strlist *slist, unsigned int idx) { - struct rb_node *nd; + struct str_node *snode = NULL; + struct rb_node *rb_node; - for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) { - struct str_node *pos = rb_entry(nd, struct str_node, rb_node); + rb_node = rblist__entry(&slist->rblist, idx); + if (rb_node) + snode = container_of(rb_node, struct str_node, rb_node); - if (!idx--) - return pos; - } - - return NULL; + return snode; } diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h index 3ba839007d2c..dd9f922ec67c 100644 --- a/tools/perf/util/strlist.h +++ b/tools/perf/util/strlist.h @@ -4,14 +4,15 @@ #include #include +#include "rblist.h" + struct str_node { struct rb_node rb_node; const char *s; }; struct strlist { - struct rb_root entries; - unsigned int nr_entries; + struct rblist rblist; bool dupstr; }; @@ -32,18 +33,18 @@ static inline bool strlist__has_entry(struct strlist *self, const char *entry) static inline bool strlist__empty(const struct strlist *self) { - return self->nr_entries == 0; + return rblist__empty(&self->rblist); } static inline unsigned int strlist__nr_entries(const struct strlist *self) { - return self->nr_entries; + return rblist__nr_entries(&self->rblist); } /* For strlist iteration */ static inline struct str_node *strlist__first(struct strlist *self) { - struct rb_node *rn = rb_first(&self->entries); + struct rb_node *rn = rb_first(&self->rblist.entries); return rn ? rb_entry(rn, struct str_node, rb_node) : NULL; } static inline struct str_node *strlist__next(struct str_node *sn) From 70b40c4a43ddfcf7a06dad4be32ff1dd2b62be09 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 30 Jul 2012 22:31:34 -0600 Subject: [PATCH 0157/1098] perf tools: Introduce intlist Built on rblist - like strlist. Used in the next patch. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343709095-7089-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 2 + tools/perf/util/intlist.c | 101 ++++++++++++++++++++++++++++++++++++++ tools/perf/util/intlist.h | 75 ++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 tools/perf/util/intlist.c create mode 100644 tools/perf/util/intlist.h diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 285f700a7836..32912af430f0 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -320,6 +320,7 @@ LIB_H += util/cgroup.h LIB_H += $(TRACE_EVENT_DIR)event-parse.h LIB_H += util/target.h LIB_H += util/rblist.h +LIB_H += util/intlist.h LIB_OBJS += $(OUTPUT)util/abspath.o LIB_OBJS += $(OUTPUT)util/alias.o @@ -385,6 +386,7 @@ LIB_OBJS += $(OUTPUT)util/cpumap.o LIB_OBJS += $(OUTPUT)util/cgroup.o LIB_OBJS += $(OUTPUT)util/target.o LIB_OBJS += $(OUTPUT)util/rblist.o +LIB_OBJS += $(OUTPUT)util/intlist.o BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o diff --git a/tools/perf/util/intlist.c b/tools/perf/util/intlist.c new file mode 100644 index 000000000000..fd530dced9cb --- /dev/null +++ b/tools/perf/util/intlist.c @@ -0,0 +1,101 @@ +/* + * Based on intlist.c by: + * (c) 2009 Arnaldo Carvalho de Melo + * + * Licensed under the GPLv2. + */ + +#include +#include +#include + +#include "intlist.h" + +static struct rb_node *intlist__node_new(struct rblist *rblist __used, + const void *entry) +{ + int i = (int)((long)entry); + struct rb_node *rc = NULL; + struct int_node *node = malloc(sizeof(*node)); + + if (node != NULL) { + node->i = i; + rc = &node->rb_node; + } + + return rc; +} + +static void int_node__delete(struct int_node *ilist) +{ + free(ilist); +} + +static void intlist__node_delete(struct rblist *rblist __used, + struct rb_node *rb_node) +{ + struct int_node *node = container_of(rb_node, struct int_node, rb_node); + + int_node__delete(node); +} + +static int intlist__node_cmp(struct rb_node *rb_node, const void *entry) +{ + int i = (int)((long)entry); + struct int_node *node = container_of(rb_node, struct int_node, rb_node); + + return node->i - i; +} + +int intlist__add(struct intlist *ilist, int i) +{ + return rblist__add_node(&ilist->rblist, (void *)((long)i)); +} + +void intlist__remove(struct intlist *ilist __used, struct int_node *node) +{ + int_node__delete(node); +} + +struct int_node *intlist__find(struct intlist *ilist, int i) +{ + struct int_node *node = NULL; + struct rb_node *rb_node = rblist__find(&ilist->rblist, (void *)((long)i)); + + if (rb_node) + node = container_of(rb_node, struct int_node, rb_node); + + return node; +} + +struct intlist *intlist__new(void) +{ + struct intlist *ilist = malloc(sizeof(*ilist)); + + if (ilist != NULL) { + rblist__init(&ilist->rblist); + ilist->rblist.node_cmp = intlist__node_cmp; + ilist->rblist.node_new = intlist__node_new; + ilist->rblist.node_delete = intlist__node_delete; + } + + return ilist; +} + +void intlist__delete(struct intlist *ilist) +{ + if (ilist != NULL) + rblist__delete(&ilist->rblist); +} + +struct int_node *intlist__entry(const struct intlist *ilist, unsigned int idx) +{ + struct int_node *node = NULL; + struct rb_node *rb_node; + + rb_node = rblist__entry(&ilist->rblist, idx); + if (rb_node) + node = container_of(rb_node, struct int_node, rb_node); + + return node; +} diff --git a/tools/perf/util/intlist.h b/tools/perf/util/intlist.h new file mode 100644 index 000000000000..6d63ab90db50 --- /dev/null +++ b/tools/perf/util/intlist.h @@ -0,0 +1,75 @@ +#ifndef __PERF_INTLIST_H +#define __PERF_INTLIST_H + +#include +#include + +#include "rblist.h" + +struct int_node { + struct rb_node rb_node; + int i; +}; + +struct intlist { + struct rblist rblist; +}; + +struct intlist *intlist__new(void); +void intlist__delete(struct intlist *ilist); + +void intlist__remove(struct intlist *ilist, struct int_node *in); +int intlist__add(struct intlist *ilist, int i); + +struct int_node *intlist__entry(const struct intlist *ilist, unsigned int idx); +struct int_node *intlist__find(struct intlist *ilist, int i); + +static inline bool intlist__has_entry(struct intlist *ilist, int i) +{ + return intlist__find(ilist, i) != NULL; +} + +static inline bool intlist__empty(const struct intlist *ilist) +{ + return rblist__empty(&ilist->rblist); +} + +static inline unsigned int intlist__nr_entries(const struct intlist *ilist) +{ + return rblist__nr_entries(&ilist->rblist); +} + +/* For intlist iteration */ +static inline struct int_node *intlist__first(struct intlist *ilist) +{ + struct rb_node *rn = rb_first(&ilist->rblist.entries); + return rn ? rb_entry(rn, struct int_node, rb_node) : NULL; +} +static inline struct int_node *intlist__next(struct int_node *in) +{ + struct rb_node *rn; + if (!in) + return NULL; + rn = rb_next(&in->rb_node); + return rn ? rb_entry(rn, struct int_node, rb_node) : NULL; +} + +/** + * intlist_for_each - iterate over a intlist + * @pos: the &struct int_node to use as a loop cursor. + * @ilist: the &struct intlist for loop. + */ +#define intlist__for_each(pos, ilist) \ + for (pos = intlist__first(ilist); pos; pos = intlist__next(pos)) + +/** + * intlist_for_each_safe - iterate over a intlist safe against removal of + * int_node + * @pos: the &struct int_node to use as a loop cursor. + * @n: another &struct int_node to use as temporary storage. + * @ilist: the &struct intlist for loop. + */ +#define intlist__for_each_safe(pos, n, ilist) \ + for (pos = intlist__first(ilist), n = intlist__next(pos); pos;\ + pos = n, n = intlist__next(n)) +#endif /* __PERF_INTLIST_H */ From 6b118e92cc78ccef7b54a296158d4738fd377bcc Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 30 Jul 2012 22:31:35 -0600 Subject: [PATCH 0158/1098] perf kvm top: Limit guest kernel info message to once 'perf kvm top' shows a continual flurry of: Can't find guest [5201]'s kernel information if it can't find the guest info and with a lot of VMs running a user has no chance of reading them all. Limit message to once per guest. Signed-off-by: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343709095-7089-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 34096275a7b5..68cd61ef6ac5 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -38,6 +38,7 @@ #include "util/cpumap.h" #include "util/xyarray.h" #include "util/sort.h" +#include "util/intlist.h" #include "util/debug.h" @@ -706,8 +707,16 @@ static void perf_event__process_sample(struct perf_tool *tool, int err; if (!machine && perf_guest) { - pr_err("Can't find guest [%d]'s kernel information\n", - event->ip.pid); + static struct intlist *seen; + + if (!seen) + seen = intlist__new(); + + if (!intlist__has_entry(seen, event->ip.pid)) { + pr_err("Can't find guest [%d]'s kernel information\n", + event->ip.pid); + intlist__add(seen, event->ip.pid); + } return; } From 7f309ed6453926a81e2a97d274f67f1e48f0d74c Mon Sep 17 00:00:00 2001 From: Palmer Cox Date: Sun, 29 Jul 2012 17:54:43 -0400 Subject: [PATCH 0159/1098] perf tools: Remove brace expansion from clean target The clean target uses brace expansion to remove some generated files. However, the default shells on many systems do not support this feature resulting in some generated files not being removed by clean. Signed-off-by: Palmer Cox Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1343598883-17907-1-git-send-email-p@lmercox.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 32912af430f0..35655c3a7b7a 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -987,7 +987,8 @@ clean: $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(MAKE) -C Documentation/ clean $(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS - $(RM) $(OUTPUT)util/*-{bison,flex}* + $(RM) $(OUTPUT)util/*-bison* + $(RM) $(OUTPUT)util/*-flex* $(python-clean) .PHONY: all install clean strip $(LIBTRACEEVENT) From 9579a974d1018c7f1d42455c29aa3f0d512c99fe Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 8 Jul 2012 13:37:42 +0200 Subject: [PATCH 0160/1098] iommu/tegra: remove invalid reference to list iterator variable If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. Replace c->dev by dev, which is the value that c->dev has been compared to. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall Acked-by: Stephen Warren Acked-by: Hiroshi DOYU Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 4ba325ab6262..a9bf4c30cd84 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -799,7 +799,7 @@ static void smmu_iommu_detach_dev(struct iommu_domain *domain, goto out; } } - dev_err(smmu->dev, "Couldn't find %s\n", dev_name(c->dev)); + dev_err(smmu->dev, "Couldn't find %s\n", dev_name(dev)); out: spin_unlock(&as->client_lock); } From d2900bd63f65bf1f40bf17f3c51457ae29fae6a8 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 24 Jul 2012 16:18:14 +0200 Subject: [PATCH 0161/1098] iommu/intel: add missing free_domain_mem Add missing free_domain_mem on failure path after alloc_domain. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @km exists@ local idexpression e; expression e1,e2,e3; type T,T1; identifier f; @@ * e = alloc_domain(...) ... when any when != e = e1 when != e1 = (T)e when != e1(...,(T)e,...) when != &e->f if(...) { ... when != e2(...,(T1)e,...) when != e3 = e when forall ( return <+...e...+>; | * return ...; ) } // Signed-off-by: Julia Lawall Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 7469b5346643..0204b62480b0 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -2008,6 +2008,7 @@ static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw) if (!drhd) { printk(KERN_ERR "IOMMU: can't find DMAR for device %s\n", pci_name(pdev)); + free_domain_mem(domain); return NULL; } iommu = drhd->iommu; From 76582d0a68ab6c46987dd678165c26ad81c44cdb Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 25 Jul 2012 16:24:49 +0200 Subject: [PATCH 0162/1098] iommu: Include linux/types.h The linux/iommu.h header uses types defined in linux/types.h but doesn't include it. Signed-off-by: Thierry Reding Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 54d6d690073c..0a85199191b9 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -20,6 +20,7 @@ #define __LINUX_IOMMU_H #include +#include #define IOMMU_READ (1) #define IOMMU_WRITE (2) From ba1eabfade3272596000bf3c62b68ca375e48b08 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 3 Aug 2012 15:55:41 +0200 Subject: [PATCH 0163/1098] iommu: Add missing forward declaration in include file The 'struct notifier_block' is not used in linux/iommu.h but not declared anywhere. Add a forward declaration for it. Reported-by: Thierry Reding Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 0a85199191b9..7e83370e6fd2 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -31,6 +31,7 @@ struct iommu_group; struct bus_type; struct device; struct iommu_domain; +struct notifier_block; /* iommu fault flags */ #define IOMMU_FAULT_READ 0x0 From d2453b2c7875dac9b323bff5d21981c41de177b1 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Mon, 30 Jul 2012 08:39:18 +0300 Subject: [PATCH 0164/1098] iommu/tegra: smmu: Cleanup with lesser nest Small clean up with lesser nest for readability. Signed-off-by: Hiroshi Doyu Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-smmu.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index a9bf4c30cd84..37669cc483b1 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -814,11 +814,14 @@ static int smmu_iommu_domain_init(struct iommu_domain *domain) /* Look for a free AS with lock held */ for (i = 0; i < smmu->num_as; i++) { as = &smmu->as[i]; - if (!as->pdir_page) { - err = alloc_pdir(as); - if (!err) - goto found; - } + + if (as->pdir_page) + continue; + + err = alloc_pdir(as); + if (!err) + goto found; + if (err != -EAGAIN) break; } From d1d076f16376066d0a51aa7d465f43059da71562 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Mon, 30 Jul 2012 08:39:19 +0300 Subject: [PATCH 0165/1098] iommu/tegra: smmu: Fix error initial value at domain_init err initial value should be -EAGAIN. Otherwise 2nd iteration always fails in the case as[0] is occupied. Signed-off-by: Hiroshi Doyu Signed-off-by: Joerg Roedel --- drivers/iommu/tegra-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index 37669cc483b1..2a4bb36bc688 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -806,7 +806,7 @@ out: static int smmu_iommu_domain_init(struct iommu_domain *domain) { - int i, err = -ENODEV; + int i, err = -EAGAIN; unsigned long flags; struct smmu_as *as; struct smmu_device *smmu = smmu_handle; From eb51637b6ec73ff5f8eaca57658a9945aa7bd45f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 1 Aug 2012 14:35:17 +0530 Subject: [PATCH 0166/1098] iommu/exynos: Fix build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following build error introduced by commit 3177bb76a8 ("iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute"): drivers/iommu/exynos-iommu.c: In function ‘exynos_iommu_domain_init’: drivers/iommu/exynos-iommu.c:735:2: error: ‘dom’ undeclared (first use in this function) Signed-off-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Joerg Roedel --- drivers/iommu/exynos-iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c index 45350ff5e93c..80bad32aa463 100644 --- a/drivers/iommu/exynos-iommu.c +++ b/drivers/iommu/exynos-iommu.c @@ -732,9 +732,9 @@ static int exynos_iommu_domain_init(struct iommu_domain *domain) spin_lock_init(&priv->pgtablelock); INIT_LIST_HEAD(&priv->clients); - dom->geometry.aperture_start = 0; - dom->geometry.aperture_end = ~0UL; - dom->geometry.force_aperture = true; + domain->geometry.aperture_start = 0; + domain->geometry.aperture_end = ~0UL; + domain->geometry.force_aperture = true; domain->priv = priv; return 0; From d4e5979c0da95791aa717c18e162540c7a596360 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Thu, 2 Aug 2012 11:58:50 +0530 Subject: [PATCH 0167/1098] ath9k: Add PID/VID support for AR1111 AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli Reported-by: Tim Bentley Signed-off-by: Mohammed Shafi Shajakhan Tested-by: Tim Bentley Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 1 + drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/pci.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cfa91ab7acf8..60b6a9daff7e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah) case AR9300_DEVID_QCA955X: case AR9300_DEVID_AR9580: case AR9300_DEVID_AR9462: + case AR9485_DEVID_AR1111: break; default: if (common->bus_ops->ath_bus_type == ATH_USB) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index dd0c146d81dc..ce7332c64efb 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -49,6 +49,7 @@ #define AR9300_DEVID_AR9462 0x0034 #define AR9300_DEVID_AR9330 0x0035 #define AR9300_DEVID_QCA955X 0x0038 +#define AR9485_DEVID_AR1111 0x0037 #define AR5416_AR9100_DEVID 0x000b diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 87b89d55e637..d455de9162ec 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */ { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */ { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */ + { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */ { 0 } }; From 8cc7a2b9f75355f60922db4adf27742ba7f2f6bc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 26 Jul 2012 16:08:53 -0300 Subject: [PATCH 0168/1098] ARM: clk-imx31: Fix the keypad clock name Fix the keypad clock name, in order to fix the following error: imx-keypad imx-keypad: failed to get keypad clock imx-keypad: probe of imx-keypad failed with error -2 Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/clk-imx31.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f9..1253af2d9971 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); From 68b0562df90a76ba964423986b2472c7e791729a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:28:49 +0800 Subject: [PATCH 0169/1098] ARM: imx: enable emi_slow_gate clock for imx5 The imx5 common clock migration causes a regression with smsc911x driver on imx53-ard board, where a smsc lan9220 controller gets connected on imx53 with EIM interface. EIM needs clock emi_slow_gate to be functional. In the new imx5 clock driver, there is no use count incremented for the clock by enabling it, so the framework closes the clock at late init time and makes EIM stop working then. Enable emi_slow_gate in clock driver initialization to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Sascha Hauer --- arch/arm/mach-imx/clk-imx51-imx53.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd2..4bdcaa97bd98 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ From 1eec0c569523782392b5e6245effddb626213b8c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:48:39 +0800 Subject: [PATCH 0170/1098] ARM: dts: imx53-ard: add regulators for lan9220 Since commit c7e963f (net/smsc911x: Add regulator support), the lan9220 device tree probe fails on imx53-ard board, because the commit makes VDD33A and VDDVARIO supplies mandatory for the driver. Add a fixed dummy 3V3 supplying lan9220 to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-ard.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbeec..fa95f4aa8ce6 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -66,10 +66,30 @@ interrupt-parent = <&gpio2>; interrupts = <31>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; From 65dee07c9927d4af17b1832e4b7a1bb704607f91 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:08:26 +0800 Subject: [PATCH 0171/1098] ARM: dts: imx: fix gpio interrupts property Commit 88cde8b (ARM: dts: imx: update #interrupt-cells for gpio nodes) changes gpio #interrupt-cells from 1 to 2 without updating the users. It causes the gpio irq requesting call failing in client driver's probe function. Add the irq type cell for those gpio interrupt users to fix their driver probe failure. Reported-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 2 +- arch/arm/boot/dts/imx53-ard.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e6..cd86177a3ea2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index fa95f4aa8ce6..da895e93a999 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,7 +64,7 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; /* * VDD33A and VDDVARIO of LAN9220 are supplied by From f0cd2dbb6cf387c11f87265462e370bb5469299e Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:11:59 +0300 Subject: [PATCH 0172/1098] vfs: kill write_super and sync_supers Finally we can kill the 'sync_supers' kernel thread along with the '->write_super()' superblock operation because all the users are gone. Now every file-system is supposed to self-manage own superblock and its dirty state. The nice thing about killing this thread is that it improves power management. Indeed, 'sync_supers' is a source of monotonic system wake-ups - it woke up every 5 seconds no matter what - even if there were no dirty superblocks and even if there were no file-systems using this service (e.g., btrfs and journalled ext4 do not need it). So it was wasting power most of the time. And because the thread was in the core of the kernel, all systems had to have it. So I am quite happy to make it go away. Interestingly, this thread is a left-over from the pdflush kernel thread which was a self-forking kernel thread responsible for all the write-back in old Linux kernels. It was turned into per-block device BDI threads, and 'sync_supers' was a left-over. Thus, R.I.P, pdflush as well. Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/super.c | 40 ---------------------------- include/linux/backing-dev.h | 1 - include/linux/fs.h | 3 --- mm/backing-dev.c | 52 ------------------------------------- mm/page-writeback.c | 1 - 5 files changed, 97 deletions(-) diff --git a/fs/super.c b/fs/super.c index b05cf47463d0..0902cfa6a12e 100644 --- a/fs/super.c +++ b/fs/super.c @@ -536,46 +536,6 @@ void drop_super(struct super_block *sb) EXPORT_SYMBOL(drop_super); -/** - * sync_supers - helper for periodic superblock writeback - * - * Call the write_super method if present on all dirty superblocks in - * the system. This is for the periodic writeback used by most older - * filesystems. For data integrity superblock writeback use - * sync_filesystems() instead. - * - * Note: check the dirty flag before waiting, so we don't - * hold up the sync while mounting a device. (The newly - * mounted device won't need syncing.) - */ -void sync_supers(void) -{ - struct super_block *sb, *p = NULL; - - spin_lock(&sb_lock); - list_for_each_entry(sb, &super_blocks, s_list) { - if (hlist_unhashed(&sb->s_instances)) - continue; - if (sb->s_op->write_super && sb->s_dirt) { - sb->s_count++; - spin_unlock(&sb_lock); - - down_read(&sb->s_umount); - if (sb->s_root && sb->s_dirt && (sb->s_flags & MS_BORN)) - sb->s_op->write_super(sb); - up_read(&sb->s_umount); - - spin_lock(&sb_lock); - if (p) - __put_super(p); - p = sb; - } - } - if (p) - __put_super(p); - spin_unlock(&sb_lock); -} - /** * iterate_supers - call function for all active superblocks * @f: function to call diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index c97c6b9cd38e..2a9a9abc9126 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -124,7 +124,6 @@ void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages, void bdi_start_background_writeback(struct backing_dev_info *bdi); int bdi_writeback_thread(void *data); int bdi_has_dirty_io(struct backing_dev_info *bdi); -void bdi_arm_supers_timer(void); void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi); void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2); diff --git a/include/linux/fs.h b/include/linux/fs.h index 38dba16c4176..aa110476a95b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1491,7 +1491,6 @@ struct sb_writers { struct super_block { struct list_head s_list; /* Keep this first */ dev_t s_dev; /* search index; _not_ kdev_t */ - unsigned char s_dirt; unsigned char s_blocksize_bits; unsigned long s_blocksize; loff_t s_maxbytes; /* Max file size */ @@ -1861,7 +1860,6 @@ struct super_operations { int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); int (*freeze_fs) (struct super_block *); int (*unfreeze_fs) (struct super_block *); @@ -2397,7 +2395,6 @@ extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync); extern int vfs_fsync(struct file *file, int datasync); extern int generic_write_sync(struct file *file, loff_t pos, loff_t count); -extern void sync_supers(void); extern void emergency_sync(void); extern void emergency_remount(void); #ifdef CONFIG_BLOCK diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 6b4718e2ee34..b41823cc05e6 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -39,12 +39,6 @@ DEFINE_SPINLOCK(bdi_lock); LIST_HEAD(bdi_list); LIST_HEAD(bdi_pending_list); -static struct task_struct *sync_supers_tsk; -static struct timer_list sync_supers_timer; - -static int bdi_sync_supers(void *); -static void sync_supers_timer_fn(unsigned long); - void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2) { if (wb1 < wb2) { @@ -250,12 +244,6 @@ static int __init default_bdi_init(void) { int err; - sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers"); - BUG_ON(IS_ERR(sync_supers_tsk)); - - setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0); - bdi_arm_supers_timer(); - err = bdi_init(&default_backing_dev_info); if (!err) bdi_register(&default_backing_dev_info, NULL, "default"); @@ -270,46 +258,6 @@ int bdi_has_dirty_io(struct backing_dev_info *bdi) return wb_has_dirty_io(&bdi->wb); } -/* - * kupdated() used to do this. We cannot do it from the bdi_forker_thread() - * or we risk deadlocking on ->s_umount. The longer term solution would be - * to implement sync_supers_bdi() or similar and simply do it from the - * bdi writeback thread individually. - */ -static int bdi_sync_supers(void *unused) -{ - set_user_nice(current, 0); - - while (!kthread_should_stop()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule(); - - /* - * Do this periodically, like kupdated() did before. - */ - sync_supers(); - } - - return 0; -} - -void bdi_arm_supers_timer(void) -{ - unsigned long next; - - if (!dirty_writeback_interval) - return; - - next = msecs_to_jiffies(dirty_writeback_interval * 10) + jiffies; - mod_timer(&sync_supers_timer, round_jiffies_up(next)); -} - -static void sync_supers_timer_fn(unsigned long unused) -{ - wake_up_process(sync_supers_tsk); - bdi_arm_supers_timer(); -} - static void wakeup_timer_fn(unsigned long data) { struct backing_dev_info *bdi = (struct backing_dev_info *)data; diff --git a/mm/page-writeback.c b/mm/page-writeback.c index e5363f34e025..5ad5ce23c1e0 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1532,7 +1532,6 @@ int dirty_writeback_centisecs_handler(ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos) { proc_dointvec(table, write, buffer, length, ppos); - bdi_arm_supers_timer(); return 0; } From 34e5053fbe88800f5c2c6cbc849abb5a9f390974 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:00 +0300 Subject: [PATCH 0173/1098] Documentation: get rid of write_super The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from various pieces of the kernel documentation. Cc: Randy Dunlap Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- Documentation/DocBook/filesystems.tmpl | 4 ++-- Documentation/filesystems/Locking | 2 -- Documentation/filesystems/porting | 5 ++--- Documentation/filesystems/vfs.txt | 4 ---- 4 files changed, 4 insertions(+), 11 deletions(-) diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl index 3fca32c41927..25b58efd955d 100644 --- a/Documentation/DocBook/filesystems.tmpl +++ b/Documentation/DocBook/filesystems.tmpl @@ -224,8 +224,8 @@ all your transactions. -Then at umount time , in your put_super() (2.4) or write_super() (2.5) -you can then call journal_destroy() to clean up your in-core journal object. +Then at umount time , in your put_super() you can then call journal_destroy() +to clean up your in-core journal object. diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 0f103e39b4f6..e540a24e5d06 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -114,7 +114,6 @@ prototypes: int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); int (*freeze_fs) (struct super_block *); int (*unfreeze_fs) (struct super_block *); @@ -136,7 +135,6 @@ write_inode: drop_inode: !!!inode->i_lock!!! evict_inode: put_super: write -write_super: read sync_fs: read freeze_fs: write unfreeze_fs: write diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 2bef2b3843d1..0742feebc6e2 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -94,9 +94,8 @@ protected. --- [mandatory] -BKL is also moved from around sb operations. ->write_super() Is now called -without BKL held. BKL should have been shifted into individual fs sb_op -functions. If you don't need it, remove it. +BKL is also moved from around sb operations. BKL should have been shifted into +individual fs sb_op functions. If you don't need it, remove it. --- [informational] diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 065aa2dc0835..2ee133e030c3 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -216,7 +216,6 @@ struct super_operations { void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); void (*put_super) (struct super_block *); - void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); int (*freeze_fs) (struct super_block *); int (*unfreeze_fs) (struct super_block *); @@ -273,9 +272,6 @@ or bottom half). put_super: called when the VFS wishes to free the superblock (i.e. unmount). This is called with the superblock lock held - write_super: called when the VFS superblock needs to be written to - disc. This method is optional - sync_fs: called when VFS is writing out all dirty data associated with a superblock. The second parameter indicates whether the method should wait until the write out has been completed. Optional. From f3f9f332e231abaf28e14344733b7d000b830f7c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 3 Aug 2012 02:36:51 +0000 Subject: [PATCH 0174/1098] emulex: benet: Add a missing CR in the end of message Missing a CR in printk causes 2 messages printed in one line. Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index c60de89b6669..90a903d83d87 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1948,7 +1948,7 @@ static int be_rx_cqs_create(struct be_adapter *adapter) if (adapter->num_rx_qs != MAX_RX_QS) dev_info(&adapter->pdev->dev, - "Created only %d receive queues", adapter->num_rx_qs); + "Created only %d receive queues\n", adapter->num_rx_qs); return 0; } From 696ecdc10622d86541f2e35cc16e15b6b3b1b67e Mon Sep 17 00:00:00 2001 From: Hiroaki SHIMODA Date: Fri, 3 Aug 2012 19:57:52 +0900 Subject: [PATCH 0175/1098] net_sched: gact: Fix potential panic in tcf_gact(). gact_rand array is accessed by gact->tcfg_ptype whose value is assumed to less than MAX_RAND, but any range checks are not performed. So add a check in tcf_gact_init(). And in tcf_gact(), we can reduce a branch. Signed-off-by: Hiroaki SHIMODA Signed-off-by: David S. Miller --- net/sched/act_gact.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c index f10fb8256442..05d60859d8e3 100644 --- a/net/sched/act_gact.c +++ b/net/sched/act_gact.c @@ -67,6 +67,9 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est, struct tcf_common *pc; int ret = 0; int err; +#ifdef CONFIG_GACT_PROB + struct tc_gact_p *p_parm = NULL; +#endif if (nla == NULL) return -EINVAL; @@ -82,6 +85,12 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est, #ifndef CONFIG_GACT_PROB if (tb[TCA_GACT_PROB] != NULL) return -EOPNOTSUPP; +#else + if (tb[TCA_GACT_PROB]) { + p_parm = nla_data(tb[TCA_GACT_PROB]); + if (p_parm->ptype >= MAX_RAND) + return -EINVAL; + } #endif pc = tcf_hash_check(parm->index, a, bind, &gact_hash_info); @@ -103,8 +112,7 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est, spin_lock_bh(&gact->tcf_lock); gact->tcf_action = parm->action; #ifdef CONFIG_GACT_PROB - if (tb[TCA_GACT_PROB] != NULL) { - struct tc_gact_p *p_parm = nla_data(tb[TCA_GACT_PROB]); + if (p_parm) { gact->tcfg_paction = p_parm->paction; gact->tcfg_pval = p_parm->pval; gact->tcfg_ptype = p_parm->ptype; @@ -133,7 +141,7 @@ static int tcf_gact(struct sk_buff *skb, const struct tc_action *a, spin_lock(&gact->tcf_lock); #ifdef CONFIG_GACT_PROB - if (gact->tcfg_ptype && gact_rand[gact->tcfg_ptype] != NULL) + if (gact->tcfg_ptype) action = gact_rand[gact->tcfg_ptype](gact); else action = gact->tcf_action; From c8c40b7f32abe0878ee693480fb2f7453d80add5 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Fri, 3 Aug 2012 00:38:36 +0000 Subject: [PATCH 0176/1098] net/mlx4_en: loopbacked packets are dropped when SMAC=DMAC Should NOT check SMAC=DMAC when: 1. loopback is turned on 2. validate_loopback is true. Fixed it accordingly. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index f32e70300770..5aba5ecdf1e2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -614,8 +614,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* If source MAC is equal to our own MAC and not performing * the selftest or flb disabled - drop the packet */ if (s_mac == priv->mac && - (!(dev->features & NETIF_F_LOOPBACK) || - !priv->validate_loopback)) + !((dev->features & NETIF_F_LOOPBACK) || + priv->validate_loopback)) goto next; /* From c18520bd1b244fe8e3ac5358137321780a70d6e7 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Fri, 3 Aug 2012 00:38:37 +0000 Subject: [PATCH 0177/1098] net/mlx4_en: Fixing TX queue stop/wake flow Removing the ring->blocked flag, it is redundant and leads to a race: We close the TX queue and then set the "blocked" flag. Between those 2 operations the completion function can check the "blocked" flag, sees that it is 0, and wouldn't open the TX queue. Using netif_tx_queue_stopped to check the state of the queue to avoid this race. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 17 +++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 019d856b1334..10bba09c44ea 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -164,7 +164,6 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, ring->cons = 0xffffffff; ring->last_nr_txbb = 1; ring->poll_cnt = 0; - ring->blocked = 0; memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info)); memset(ring->buf, 0, ring->buf_size); @@ -365,14 +364,13 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq) ring->cons += txbbs_skipped; netdev_tx_completed_queue(ring->tx_queue, packets, bytes); - /* Wakeup Tx queue if this ring stopped it */ - if (unlikely(ring->blocked)) { - if ((u32) (ring->prod - ring->cons) <= - ring->size - HEADROOM - MAX_DESC_TXBBS) { - ring->blocked = 0; - netif_tx_wake_queue(ring->tx_queue); - priv->port_stats.wake_queue++; - } + /* + * Wakeup Tx queue if this stopped, and at least 1 packet + * was completed + */ + if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) { + netif_tx_wake_queue(ring->tx_queue); + priv->port_stats.wake_queue++; } } @@ -592,7 +590,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->size - HEADROOM - MAX_DESC_TXBBS)) { /* every full Tx ring stops queue */ netif_tx_stop_queue(ring->tx_queue); - ring->blocked = 1; priv->port_stats.queue_stopped++; return NETDEV_TX_BUSY; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5f1ab105debc..9d27e42264e2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -248,7 +248,6 @@ struct mlx4_en_tx_ring { u32 doorbell_qpn; void *buf; u16 poll_cnt; - int blocked; struct mlx4_en_tx_info *tx_info; u8 *bounce_buf; u32 last_nr_txbb; From 2207b60ffb6545040e2e2620fced13deba7643c2 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Fri, 3 Aug 2012 00:38:38 +0000 Subject: [PATCH 0178/1098] net/mlx4_core: Remove port type restrictions Port1=Eth, Port2=IB restriction is no longer required. Having RoCE, there will always rdma port initialized over ConnectX physical port, no matter whether the link layer is IB or Ethernet. So we always have dual port IB device. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 --- drivers/net/ethernet/mellanox/mlx4/sense.c | 14 -------------- 2 files changed, 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 48d0e90194cb..827b72dfce99 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -157,9 +157,6 @@ int mlx4_check_port_params(struct mlx4_dev *dev, "on this HCA, aborting.\n"); return -EINVAL; } - if (port_type[i] == MLX4_PORT_TYPE_ETH && - port_type[i + 1] == MLX4_PORT_TYPE_IB) - return -EINVAL; } } diff --git a/drivers/net/ethernet/mellanox/mlx4/sense.c b/drivers/net/ethernet/mellanox/mlx4/sense.c index 802498293528..34ee09bae36e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/sense.c +++ b/drivers/net/ethernet/mellanox/mlx4/sense.c @@ -80,20 +80,6 @@ void mlx4_do_sense_ports(struct mlx4_dev *dev, stype[i - 1] = defaults[i - 1]; } - /* - * Adjust port configuration: - * If port 1 sensed nothing and port 2 is IB, set both as IB - * If port 2 sensed nothing and port 1 is Eth, set both as Eth - */ - if (stype[0] == MLX4_PORT_TYPE_ETH) { - for (i = 1; i < dev->caps.num_ports; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_ETH; - } - if (stype[dev->caps.num_ports - 1] == MLX4_PORT_TYPE_IB) { - for (i = 0; i < dev->caps.num_ports - 1; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_IB; - } - /* * If sensed nothing, remain in current configuration. */ From ae9e63bb2c0cf5437d9d13d822b27149336c6e0e Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 3 Aug 2012 09:32:18 +0000 Subject: [PATCH 0179/1098] hyperv: Move wait completion msg code into rndis_filter_halt_device() We need to wait for send_completion msg before put_rndis_request() at the end of rndis_filter_halt_device(). Otherwise, netvsc_send_completion() may reference freed memory which is overwritten, and cause panic. Reported-by: Long Li Reported-by: Jason Wang Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 7 ------- drivers/net/hyperv/rndis_filter.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 6cee2917eb02..4a1a5f58fa73 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -383,13 +383,6 @@ int netvsc_device_remove(struct hv_device *device) unsigned long flags; net_device = hv_get_drvdata(device); - spin_lock_irqsave(&device->channel->inbound_lock, flags); - net_device->destroy = true; - spin_unlock_irqrestore(&device->channel->inbound_lock, flags); - - /* Wait for all send completions */ - wait_event(net_device->wait_drain, - atomic_read(&net_device->num_outstanding_sends) == 0); netvsc_disconnect_vsp(net_device); diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index e5d6146937fa..1e88a1095934 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -718,6 +718,9 @@ static void rndis_filter_halt_device(struct rndis_device *dev) { struct rndis_request *request; struct rndis_halt_request *halt; + struct netvsc_device *nvdev = dev->net_dev; + struct hv_device *hdev = nvdev->dev; + ulong flags; /* Attempt to do a rndis device halt */ request = get_rndis_request(dev, RNDIS_MSG_HALT, @@ -735,6 +738,14 @@ static void rndis_filter_halt_device(struct rndis_device *dev) dev->state = RNDIS_DEV_UNINITIALIZED; cleanup: + spin_lock_irqsave(&hdev->channel->inbound_lock, flags); + nvdev->destroy = true; + spin_unlock_irqrestore(&hdev->channel->inbound_lock, flags); + + /* Wait for all send completions */ + wait_event(nvdev->wait_drain, + atomic_read(&nvdev->num_outstanding_sends) == 0); + if (request) put_rndis_request(dev, request); return; From 77f00f6324cb97cf1df6f9c4aaeea6ada23abdb2 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 2 Aug 2012 23:10:01 +0000 Subject: [PATCH 0180/1098] isdnloop: fix and simplify isdnloop_init() Fix a buffer overflow bug by removing the revision and printk. [ 22.016214] isdnloop-ISDN-driver Rev 1.11.6.7 [ 22.097508] isdnloop: (loop0) virtual card added [ 22.174400] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff83244972 [ 22.174400] [ 22.436157] Pid: 1, comm: swapper Not tainted 3.5.0-bisect-00018-gfa8bbb1-dirty #129 [ 22.624071] Call Trace: [ 22.720558] [] ? CallcNew+0x56/0x56 [ 22.815248] [] panic+0x110/0x329 [ 22.914330] [] ? isdnloop_init+0xaf/0xb1 [ 23.014800] [] ? CallcNew+0x56/0x56 [ 23.090763] [] __stack_chk_fail+0x2b/0x30 [ 23.185748] [] isdnloop_init+0xaf/0xb1 Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller --- drivers/isdn/isdnloop/isdnloop.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index 5405ec644db3..baf2686aa8eb 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -16,7 +16,6 @@ #include #include "isdnloop.h" -static char *revision = "$Revision: 1.11.6.7 $"; static char *isdnloop_id = "loop0"; MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card"); @@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1) static int __init isdnloop_init(void) { - char *p; - char rev[10]; - - if ((p = strchr(revision, ':'))) { - strcpy(rev, p + 1); - p = strchr(rev, '$'); - *p = 0; - } else - strcpy(rev, " ??? "); - printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev); - if (isdnloop_id) return (isdnloop_addcard(isdnloop_id)); From f3a1ef9cee4812e2d08c855eb373f0d83433e34c Mon Sep 17 00:00:00 2001 From: Peter Meiser Date: Thu, 2 Aug 2012 02:30:20 +0000 Subject: [PATCH 0181/1098] cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN Hello, looking at http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#Supported_devices, there are branded Ericsson devices from Dell and Toshiba. The to-be-added vendor IDs are 0x413c for Dell and 0x0930 for Toshiba. Please find attached a patch to add these vendor IDs. Signed-off-by: Peter Meiser Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f4ce5957df32..4cd582a4f625 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1225,6 +1225,26 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Dell branded MBM devices like DW5550 */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x413c, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Toshiba branded MBM devices */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x0930, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), From ff6e1225957cce9e93b8d84dc240e5a44094d0ec Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 3 Aug 2012 14:38:07 +0000 Subject: [PATCH 0182/1098] cris: fix eth_v10.c build error Fix build error on cris (not tested, no toolchain here): drivers/net/cris/eth_v10.c: error: too many arguments to function 'e100rxtx_interrupt' Reported-by: Geert Uytterhoeven Signed-off-by: Randy Dunlap Cc: Mikael Starvik Cc: Jesper Nilsson Cc: linux-cris-kernel@axis.com Signed-off-by: David S. Miller --- drivers/net/cris/eth_v10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index f0c8bd54ce29..021d69c5d9bc 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1712,7 +1712,7 @@ e100_set_network_leds(int active) static void e100_netpoll(struct net_device* netdev) { - e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); + e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev); } #endif From 6601fac822778aa6003aed37d8ba7acdc9a4f369 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:01 +0300 Subject: [PATCH 0183/1098] Documentation: fix the VM knobs descritpion WRT pdflush The pdflush thread is long gone, however we still mention it incorrectly in the kernel documentation. This patch fixes the situation. Cc: Randy Dunlap Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- Documentation/laptops/laptop-mode.txt | 12 ++++++------ Documentation/sysctl/vm.txt | 14 +++++++------- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt index 0bf25eebce94..4ebbfc3f1c6e 100644 --- a/Documentation/laptops/laptop-mode.txt +++ b/Documentation/laptops/laptop-mode.txt @@ -262,9 +262,9 @@ MINIMUM_BATTERY_MINUTES=10 # # Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. +# exceeded, the kernel will wake flusher threads which will then reduce the +# amount of dirty memory to dirty_background_ratio. Set this nice and low, +# so once some writeout has commenced, we do a lot of it. # #DIRTY_BACKGROUND_RATIO=5 @@ -384,9 +384,9 @@ CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'} # # Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. +# exceeded, the kernel will wake flusher threads which will then reduce the +# amount of dirty memory to dirty_background_ratio. Set this nice and low, +# so once some writeout has commenced, we do a lot of it. # DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'} diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index dcc2a94ae34e..078701fdbd4d 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -76,8 +76,8 @@ huge pages although processes will also directly compact memory as required. dirty_background_bytes -Contains the amount of dirty memory at which the pdflush background writeback -daemon will start writeback. +Contains the amount of dirty memory at which the background kernel +flusher threads will start writeback. Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only one of them may be specified at a time. When one sysctl is written it is @@ -89,7 +89,7 @@ other appears as 0 when read. dirty_background_ratio Contains, as a percentage of total system memory, the number of pages at which -the pdflush background writeback daemon will start writing out dirty data. +the background kernel flusher threads will start writing out dirty data. ============================================================== @@ -112,9 +112,9 @@ retained. dirty_expire_centisecs This tunable is used to define when dirty data is old enough to be eligible -for writeout by the pdflush daemons. It is expressed in 100'ths of a second. -Data which has been dirty in-memory for longer than this interval will be -written out next time a pdflush daemon wakes up. +for writeout by the kernel flusher threads. It is expressed in 100'ths +of a second. Data which has been dirty in-memory for longer than this +interval will be written out next time a flusher thread wakes up. ============================================================== @@ -128,7 +128,7 @@ data. dirty_writeback_centisecs -The pdflush writeback daemons will periodically wake up and write `old' data +The kernel flusher threads will periodically wake up and write `old' data out to disk. This tunable expresses the interval between those wakeups, in 100'ths of a second. From d3009c6cffd37e9bc8435a002fe862548c440d97 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:02 +0300 Subject: [PATCH 0184/1098] ext3: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from ext3. Cc: Jan Kara Cc: Andrew Morton Cc: Andreas Dilger Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/ext3/inode.c | 8 -------- fs/ext3/super.c | 11 ----------- 2 files changed, 19 deletions(-) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 9a4a5c48b1c9..a07597307fd1 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -3459,14 +3459,6 @@ ext3_reserve_inode_write(handle_t *handle, struct inode *inode, * inode out, but prune_icache isn't a user-visible syncing function. * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) * we start and wait on commits. - * - * Is this efficient/effective? Well, we're being nice to the system - * by cleaning up our inodes proactively so they can be reaped - * without I/O. But we are potentially leaving up to five seconds' - * worth of inodes floating about which prune_icache wants us to - * write out. One way to fix that would be to get prune_icache() - * to do a write_super() to free up some memory. It has the desired - * effect. */ int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode) { diff --git a/fs/ext3/super.c b/fs/ext3/super.c index ff9bcdc5b0d5..8c892e93d8e7 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -64,11 +64,6 @@ static int ext3_freeze(struct super_block *sb); /* * Wrappers for journal_start/end. - * - * The only special thing we need to do here is to make sure that all - * journal_end calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. */ handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) { @@ -90,12 +85,6 @@ handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) return journal_start(journal, nblocks); } -/* - * The only special thing we need to do here is to make sure that all - * journal_stop calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. - */ int __ext3_journal_stop(const char *where, handle_t *handle) { struct super_block *sb; From 7652bdfcb5888a389a7850ed19a4630e3a09cb9c Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:03 +0300 Subject: [PATCH 0185/1098] ext4: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from ext3. Cc: "Theodore Ts'o" Cc: Andreas Dilger Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/ext4/inode.c | 8 -------- fs/ext4/super.c | 11 ----------- 2 files changed, 19 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 6324f74e0342..bcb60d08a964 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4589,14 +4589,6 @@ static int ext4_expand_extra_isize(struct inode *inode, * inode out, but prune_icache isn't a user-visible syncing function. * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) * we start and wait on commits. - * - * Is this efficient/effective? Well, we're being nice to the system - * by cleaning up our inodes proactively so they can be reaped - * without I/O. But we are potentially leaving up to five seconds' - * worth of inodes floating about which prune_icache wants us to - * write out. One way to fix that would be to get prune_icache() - * to do a write_super() to free up some memory. It has the desired - * effect. */ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) { diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d76ec8277d3f..3e0851e4f468 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -326,11 +326,6 @@ static void ext4_put_nojournal(handle_t *handle) /* * Wrappers for jbd2_journal_start/end. - * - * The only special thing we need to do here is to make sure that all - * journal_end calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. */ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks) { @@ -356,12 +351,6 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks) return jbd2_journal_start(journal, nblocks); } -/* - * The only special thing we need to do here is to make sure that all - * jbd2_journal_stop calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. - */ int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle) { struct super_block *sb; From f6463b0da6937e288b115d641ccd46c70fb3a4a8 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:04 +0300 Subject: [PATCH 0186/1098] ext4: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from ext4 comments. Cc: "Theodore Ts'o" Cc: Andreas Dilger Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index bcb60d08a964..dff171c3a123 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1970,7 +1970,7 @@ static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate); * This function can get called via... * - ext4_da_writepages after taking page lock (have journal handle) * - journal_submit_inode_data_buffers (no journal handle) - * - shrink_page_list via pdflush (no journal handle) + * - shrink_page_list via the kswapd/direct reclaim (no journal handle) * - grab_page_cache when doing write_begin (have journal handle) * * We don't do any block allocation in this function. If we have page with From 34eaadaf22b0dd453288c6b115e0c823a0fb74d5 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:05 +0300 Subject: [PATCH 0187/1098] btrfs: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from btrfs. Cc: Chris Mason Cc: linux-btrfs@vger.kernel.org Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/btrfs/super.c | 4 ---- fs/btrfs/volumes.c | 4 ---- 2 files changed, 8 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 8c6e61d6eed5..f2eb24c477a3 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -100,10 +100,6 @@ static void __save_error_info(struct btrfs_fs_info *fs_info) fs_info->fs_state = BTRFS_SUPER_FLAG_ERROR; } -/* NOTE: - * We move write_super stuff at umount in order to avoid deadlock - * for umount hold all lock. - */ static void save_error_info(struct btrfs_fs_info *fs_info) { __save_error_info(fs_info); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b8708f994e67..e86ae04abe6a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1744,10 +1744,6 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) device->fs_devices = root->fs_info->fs_devices; - /* - * we don't want write_supers to jump in here with our device - * half setup - */ mutex_lock(&root->fs_info->fs_devices->device_list_mutex); list_add_rcu(&device->dev_list, &root->fs_info->fs_devices->devices); list_add(&device->dev_alloc_list, From b257031408945eb89980e14cb79d5fd854d8f25f Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:06 +0300 Subject: [PATCH 0188/1098] btrfs: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from btrfs comments. Cc: Chris Mason Cc: linux-btrfs@vger.kernel.org Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/btrfs/inode.c | 3 ++- fs/btrfs/ordered-data.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 83baec24946d..6e8f416773d4 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -324,7 +324,8 @@ static noinline int add_async_extent(struct async_cow *cow, * If this code finds it can't get good compression, it puts an * entry onto the work queue to write the uncompressed bytes. This * makes sure that both compressed inodes and uncompressed inodes - * are written in the same order that pdflush sent them down. + * are written in the same order that the flusher thread sent them + * down. */ static noinline int compress_file_range(struct inode *inode, struct page *locked_page, diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 643335a4fe3c..051c7fe551dd 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -596,7 +596,7 @@ void btrfs_start_ordered_extent(struct inode *inode, /* * pages in the range can be dirty, clean or writeback. We * start IO on any dirty ones so the wait doesn't stall waiting - * for pdflush to find them + * for the flusher thread to find them */ if (!test_bit(BTRFS_ORDERED_DIRECT, &entry->flags)) filemap_fdatawrite_range(inode->i_mapping, start, end); From 12810ad70858af10f5e00b3c178085c03baa457b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:07 +0300 Subject: [PATCH 0189/1098] jbd/jbd2: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from various jbd and jbd2. Cc: Andrew Morton Cc: Jan Kara Cc: "Theodore Ts'o" Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/jbd/journal.c | 4 ++-- fs/jbd2/journal.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 425c2f2cf170..09357508ec9a 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -534,8 +534,8 @@ int journal_start_commit(journal_t *journal, tid_t *ptid) ret = 1; } else if (journal->j_committing_transaction) { /* - * If ext3_write_super() recently started a commit, then we - * have to wait for completion of that transaction + * If commit has been started, then we have to wait for + * completion of that transaction. */ if (ptid) *ptid = journal->j_committing_transaction->t_tid; diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index e9a3c4c85594..8625da27eccf 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -612,8 +612,8 @@ int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid) ret = 1; } else if (journal->j_committing_transaction) { /* - * If ext3_write_super() recently started a commit, then we - * have to wait for completion of that transaction + * If commit has been started, then we have to wait for + * completion of that transaction. */ if (ptid) *ptid = journal->j_committing_transaction->t_tid; From 0d5c3eba2e1e5aa74e097f49bc90b58f607e101c Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:08 +0300 Subject: [PATCH 0190/1098] vfs: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from vfs comments. Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/bio.c | 2 +- include/linux/writeback.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 73922abba832..5eaa70c9d96e 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -1312,7 +1312,7 @@ EXPORT_SYMBOL(bio_copy_kern); * Note that this code is very hard to test under normal circumstances because * direct-io pins the pages with get_user_pages(). This makes * is_page_cache_freeable return false, and the VM will not clean the pages. - * But other code (eg, pdflush) could clean the pages if they are mapped + * But other code (eg, flusher threads) could clean the pages if they are mapped * pagecache. * * Simply disabling the call to bio_set_pages_dirty() is a good way to test the diff --git a/include/linux/writeback.h b/include/linux/writeback.h index c66fe3332d83..50c3e8fa06a8 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -104,7 +104,6 @@ static inline void wait_on_inode(struct inode *inode) wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE); } - /* * mm/page-writeback.c */ From 50640bcc0a0e5a66587fa051b327654c739c9c19 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:09 +0300 Subject: [PATCH 0191/1098] hfs: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from hfs. Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/hfs/mdb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/hfs/mdb.c b/fs/hfs/mdb.c index 5fd51a5833ff..b7ec224910c5 100644 --- a/fs/hfs/mdb.c +++ b/fs/hfs/mdb.c @@ -236,10 +236,10 @@ out: * hfs_mdb_commit() * * Description: - * This updates the MDB on disk (look also at hfs_write_super()). + * This updates the MDB on disk. * It does not check, if the superblock has been modified, or * if the filesystem has been mounted read-only. It is mainly - * called by hfs_write_super() and hfs_btree_extend(). + * called by hfs_sync_fs() and flush_mdb(). * Input Variable(s): * struct hfs_mdb *mdb: Pointer to the hfs MDB * int backup; From 166ac34b74faa757ca936fde790d2121a3f40f65 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:11 +0300 Subject: [PATCH 0192/1098] nilfs2: nuke write_super from comments The '->write_super' superblock method is gone, and this patch removes all the references to 'write_super' from ntfs. Cc: KONISHI Ryusuke Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/nilfs2/super.c | 4 ---- fs/nilfs2/the_nilfs.h | 2 -- 2 files changed, 6 deletions(-) diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 6522cac6057c..6a10812711c1 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -676,17 +676,13 @@ static const struct super_operations nilfs_sops = { .alloc_inode = nilfs_alloc_inode, .destroy_inode = nilfs_destroy_inode, .dirty_inode = nilfs_dirty_inode, - /* .write_inode = nilfs_write_inode, */ - /* .drop_inode = nilfs_drop_inode, */ .evict_inode = nilfs_evict_inode, .put_super = nilfs_put_super, - /* .write_super = nilfs_write_super, */ .sync_fs = nilfs_sync_fs, .freeze_fs = nilfs_freeze, .unfreeze_fs = nilfs_unfreeze, .statfs = nilfs_statfs, .remount_fs = nilfs_remount, - /* .umount_begin */ .show_options = nilfs_show_options }; diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h index 6eee4177807b..be1267a34cea 100644 --- a/fs/nilfs2/the_nilfs.h +++ b/fs/nilfs2/the_nilfs.h @@ -107,8 +107,6 @@ struct the_nilfs { * used for * - loading the latest checkpoint exclusively. * - allocating a new full segment. - * - protecting s_dirt in the super_block struct - * (see nilfs_write_super) and the following fields. */ struct buffer_head *ns_sbh[2]; struct nilfs_super_block *ns_sbp[2]; From d97482ede202f424670a53673c362e5189107875 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:12 +0300 Subject: [PATCH 0193/1098] drbd: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from drbd comments. Cc: drbd-dev@lists.linbit.com Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- drivers/block/drbd/drbd_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 2e0e7fc1dbba..dbe6135a2abe 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -3537,9 +3537,9 @@ static void drbd_cleanup(void) } /** - * drbd_congested() - Callback for pdflush + * drbd_congested() - Callback for the flusher thread * @congested_data: User data - * @bdi_bits: Bits pdflush is currently interested in + * @bdi_bits: Bits the BDI flusher thread is currently interested in * * Returns 1< Date: Wed, 25 Jul 2012 18:12:13 +0300 Subject: [PATCH 0194/1098] gfs2: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from gfs comments. Cc: Steven Whitehouse Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/gfs2/meta_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index 3a56c8d94de0..22255d96b27e 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -52,7 +52,7 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb /* * If it's a fully non-blocking write attempt and we cannot * lock the buffer then redirty the page. Note that this can - * potentially cause a busy-wait loop from pdflush and kswapd + * potentially cause a busy-wait loop from flusher thread and kswapd * activity, but those code paths have their own higher-level * throttling. */ From 5c57f20b824a163bd7dfa42abc76582ad24a745a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2012 18:12:14 +0300 Subject: [PATCH 0195/1098] UBIFS: nuke pdflush from comments The pdflush thread is long gone, so this patch removes references to pdflush from UBIFS comments. Signed-off-by: Artem Bityutskiy Signed-off-by: Al Viro --- fs/ubifs/file.c | 10 +++++----- fs/ubifs/super.c | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 35389ca2d267..7bd6e72afd11 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -37,11 +37,11 @@ * * A thing to keep in mind: inode @i_mutex is locked in most VFS operations we * implement. However, this is not true for 'ubifs_writepage()', which may be - * called with @i_mutex unlocked. For example, when pdflush is doing background - * write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex. At "normal" - * work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g. in the - * "sys_write -> alloc_pages -> direct reclaim path". So, in 'ubifs_writepage()' - * we are only guaranteed that the page is locked. + * called with @i_mutex unlocked. For example, when flusher thread is doing + * background write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex. + * At "normal" work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g. + * in the "sys_write -> alloc_pages -> direct reclaim path". So, in + * 'ubifs_writepage()' we are only guaranteed that the page is locked. * * Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the * read-ahead path does not lock it ("sys_read -> generic_file_aio_read -> diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 1c766c39c038..c3fa6c5327a3 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -303,7 +303,7 @@ static int ubifs_write_inode(struct inode *inode, struct writeback_control *wbc) mutex_lock(&ui->ui_mutex); /* * Due to races between write-back forced by budgeting - * (see 'sync_some_inodes()') and pdflush write-back, the inode may + * (see 'sync_some_inodes()') and background write-back, the inode may * have already been synchronized, do not do this again. This might * also happen if it was synchronized in an VFS operation, e.g. * 'ubifs_link()'. From fe7c80518e34d1786f4a940ce673a0bfcbe53298 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 4 Aug 2012 08:39:23 +0400 Subject: [PATCH 0196/1098] missed mnt_drop_write() in do_dentry_open() This one ought to be __mnt_drop_write(), to match __mnt_want_write() in the beginning... Signed-off-by: Al Viro --- fs/open.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/open.c b/fs/open.c index f3d96e7e7b19..bc132e167d2d 100644 --- a/fs/open.c +++ b/fs/open.c @@ -717,7 +717,7 @@ cleanup_all: * here, so just reset the state. */ file_reset_write(f); - mnt_drop_write(f->f_path.mnt); + __mnt_drop_write(f->f_path.mnt); } } cleanup_file: From 925b11f706642732ce2ae53b0f0d3fd54adc5075 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Tue, 31 Jul 2012 01:01:23 +0000 Subject: [PATCH 0197/1098] igb: Fix for failure to init on some 82576 devices. Move nvm invalid size check to before size assigned by mac_type for 82575 and later parts in get_invariants function. This fixes a problem found on some 82576 devices where the part will not initialize because the nvm_read function pointer ends up getting assigned to the incorrect function. Reported By: Stefan Assmann Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/e1000_82575.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 5e84eaac48c1..ba994fb4cec6 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -254,6 +254,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) */ size += NVM_WORD_SIZE_BASE_SHIFT; + /* + * Check for invalid size + */ + if ((hw->mac.type == e1000_82576) && (size > 15)) { + pr_notice("The NVM size is not valid, defaulting to 32K\n"); + size = 15; + } + nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { nvm->opcode_bits = 8; @@ -281,14 +289,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } else nvm->type = e1000_nvm_flash_hw; - /* - * Check for invalid size - */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); - size = 15; - } - /* NVM Function Pointers */ switch (hw->mac.type) { case e1000_82580: From 89d351c046c287f293b4b2fda1d76c4df44b95ce Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 1 Aug 2012 05:41:25 +0000 Subject: [PATCH 0198/1098] igb: correct hardware type (i210/i211) check in igb_loopback_test() In the original code ... if ((adapter->hw.mac.type == e1000_i210) || (adapter->hw.mac.type == e1000_i210)) { ... the second check of 'adapter->hw.mac.type' is pointless since it tests for the exact same value as the first. Signed-off-by: Jesper Juhl Acked-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index a19c84cad0e9..ad489b76980f 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1783,7 +1783,7 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) goto out; } if ((adapter->hw.mac.type == e1000_i210) - || (adapter->hw.mac.type == e1000_i210)) { + || (adapter->hw.mac.type == e1000_i211)) { dev_err(&adapter->pdev->dev, "Loopback test not supported " "on this part at this time.\n"); From d836200a1c239a488cd2ed9867f4792f25f721d5 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 1 Aug 2012 05:41:30 +0000 Subject: [PATCH 0199/1098] igb: don't break user visible strings over multiple lines in igb_ethtool.c Even when they go beyond 80 characters, user visible strings should be on one line to make them easy to grep for. Signed-off-by: Jesper Juhl Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 23 ++++++++++---------- 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index ad489b76980f..90550f5e3dd9 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -209,8 +209,8 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ if (igb_check_reset_block(hw)) { - dev_err(&adapter->pdev->dev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + dev_err(&adapter->pdev->dev, + "Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } @@ -1089,8 +1089,8 @@ static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, wr32(reg, (_test[pat] & write)); val = rd32(reg) & mask; if (val != (_test[pat] & write & mask)) { - dev_err(&adapter->pdev->dev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", + dev_err(&adapter->pdev->dev, + "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", reg, val, (_test[pat] & write & mask)); *data = reg; return 1; @@ -1108,8 +1108,8 @@ static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, wr32(reg, write & mask); val = rd32(reg); if ((write & mask) != (val & mask)) { - dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:" - " got 0x%08X expected 0x%08X\n", reg, + dev_err(&adapter->pdev->dev, + "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -1171,8 +1171,9 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_STATUS, toggle); after = rd32(E1000_STATUS) & toggle; if (value != after) { - dev_err(&adapter->pdev->dev, "failed STATUS register test " - "got: 0x%08X expected: 0x%08X\n", after, value); + dev_err(&adapter->pdev->dev, + "failed STATUS register test got: 0x%08X expected: 0x%08X\n", + after, value); *data = 1; return 1; } @@ -1777,16 +1778,14 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) * sessions are active */ if (igb_check_reset_block(&adapter->hw)) { dev_err(&adapter->pdev->dev, - "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + "Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } if ((adapter->hw.mac.type == e1000_i210) || (adapter->hw.mac.type == e1000_i211)) { dev_err(&adapter->pdev->dev, - "Loopback test not supported " - "on this part at this time.\n"); + "Loopback test not supported on this part at this time.\n"); *data = 0; goto out; } From 10ce0473e0de3ff8c091735f85c20fceace061cd Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 3 Aug 2012 10:08:12 +0530 Subject: [PATCH 0200/1098] spi/s3c64xx: Add missing static storage class specifiers Silences the following sparse warnings: drivers/spi/spi-s3c64xx.c:1482:32: warning: symbol 's3c2443_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1489:32: warning: symbol 's3c6410_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1495:32: warning: symbol 's5p64x0_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1501:32: warning: symbol 's5pc100_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1508:32: warning: symbol 's5pv210_spi_port_config' was not declared. Should it be static? drivers/spi/spi-s3c64xx.c:1515:32: warning: symbol 'exynos4_spi_port_config' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/spi/spi-s3c64xx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 646a7657fe62..5ed1a76636c6 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1479,40 +1479,40 @@ static const struct dev_pm_ops s3c64xx_spi_pm = { s3c64xx_spi_runtime_resume, NULL) }; -struct s3c64xx_spi_port_config s3c2443_spi_port_config = { +static struct s3c64xx_spi_port_config s3c2443_spi_port_config = { .fifo_lvl_mask = { 0x7f }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s3c6410_spi_port_config = { +static struct s3c64xx_spi_port_config s3c6410_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, }; -struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { +static struct s3c64xx_spi_port_config s5p64x0_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, }; -struct s3c64xx_spi_port_config s5pc100_spi_port_config = { +static struct s3c64xx_spi_port_config s5pc100_spi_port_config = { .fifo_lvl_mask = { 0x7f, 0x7F }, .rx_lvl_offset = 13, .tx_st_done = 21, .high_speed = true, }; -struct s3c64xx_spi_port_config s5pv210_spi_port_config = { +static struct s3c64xx_spi_port_config s5pv210_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, .high_speed = true, }; -struct s3c64xx_spi_port_config exynos4_spi_port_config = { +static struct s3c64xx_spi_port_config exynos4_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, .rx_lvl_offset = 15, .tx_st_done = 25, From 37a2d84a38df16e614bbfbb18a5155ebd8256938 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Thu, 2 Aug 2012 16:41:25 +0530 Subject: [PATCH 0201/1098] spi: omap2-mcspi: Fix the error handling in probe The kfree() is taken care of by the spi core (spi_master_release() function) that is called once the last reference to the underlying struct device has been released. So the driver need not call kfree. Also the put was missed in some of the error handling fix the same. There by fixing the missing device_put in some of the error paths. Acked-by: Guenter Roeck Reported-by: Guenter Roeck Signed-off-by: Shubhrajyoti D Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index bc4778175e34..b2fb141da375 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1228,18 +1228,16 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) status = spi_register_master(master); if (status < 0) - goto err_spi_register; + goto disable_pm; return status; -err_spi_register: - spi_master_put(master); disable_pm: pm_runtime_disable(&pdev->dev); dma_chnl_free: kfree(mcspi->dma_channels); free_master: - kfree(master); + spi_master_put(master); platform_set_drvdata(pdev, NULL); return status; } From 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 3 Aug 2012 20:54:48 +0200 Subject: [PATCH 0202/1098] ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41 (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2 Signed-off-by: Marek Vasut Cc: stable@vger.kernel.org Cc: Russell King Cc: Wolfgang Denk Signed-off-by: Shawn Guo --- arch/arm/configs/mxs_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74..4edcfb4e4dee 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y From 6eec0152c4aa43636e180b21d5c71743f25d1220 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 30 Jul 2012 15:06:14 +0200 Subject: [PATCH 0203/1098] ARM: mxs: always build ocotp With this patch ocotp support will always be build into the kernel on mxs. Otherwise a DT-only kernel fails to link with: arch/arm/mach-mxs/mach-mxs.c:169: undefined reference to `mxs_get_ocotp' Signed-off-by: Marc Kleine-Budde Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/Kconfig | 6 ------ arch/arm/mach-mxs/Makefile | 3 +-- 2 files changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf1..9a8bbda195b2 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb437..fed3695a1339 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o From c43ba8008252d26e023f3943bb83a48641b3dec4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 19 Jul 2012 16:41:10 +0800 Subject: [PATCH 0204/1098] pinctrl: mxs: register driver at postcore_initcall time It's not so usual, but there are still some cases which require pinctrl driver function at arch_initcall time. So register imx23 and imx28 pinctrl driver at postcore_initcall time. Signed-off-by: Shawn Guo Reviewed-by: Richard Zhao Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-imx23.c | 2 +- drivers/pinctrl/pinctrl-imx28.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c index 75d3eff94296..3674d877ed7c 100644 --- a/drivers/pinctrl/pinctrl-imx23.c +++ b/drivers/pinctrl/pinctrl-imx23.c @@ -292,7 +292,7 @@ static int __init imx23_pinctrl_init(void) { return platform_driver_register(&imx23_pinctrl_driver); } -arch_initcall(imx23_pinctrl_init); +postcore_initcall(imx23_pinctrl_init); static void __exit imx23_pinctrl_exit(void) { diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c index b973026811a2..0f5b2122b1ba 100644 --- a/drivers/pinctrl/pinctrl-imx28.c +++ b/drivers/pinctrl/pinctrl-imx28.c @@ -408,7 +408,7 @@ static int __init imx28_pinctrl_init(void) { return platform_driver_register(&imx28_pinctrl_driver); } -arch_initcall(imx28_pinctrl_init); +postcore_initcall(imx28_pinctrl_init); static void __exit imx28_pinctrl_exit(void) { From 0e3ac20d9f9872cbf2d00d6a63f92759cb8dd082 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Sat, 21 Jul 2012 14:22:58 +0545 Subject: [PATCH 0205/1098] pinctrl/pinctrl-u300: remove unneeded devm_kfree call the allocated memory will be destroyed at the driver unload time, automatically if driver uses the devm_ functions, so no need of doing devm_kfree at the error path Signed-off-by: Devendra Naga Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-u300.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index a7ad8c112d91..309f5b9a70ec 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1121,10 +1121,8 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev) upmx->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out_no_resource; - } + if (!res) + return -ENOENT; upmx->phybase = res->start; upmx->physize = resource_size(res); @@ -1165,8 +1163,6 @@ out_no_remap: platform_set_drvdata(pdev, NULL); out_no_memregion: release_mem_region(upmx->phybase, upmx->physize); -out_no_resource: - devm_kfree(&pdev->dev, upmx); return ret; } From 8abdd2d2d873ece35a201c2e05af7b6998cf0dca Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 Jul 2012 13:55:10 +0100 Subject: [PATCH 0206/1098] gpio-sch: Fix leak of resource Signed-off-by: Alan Cox Signed-off-by: Linus Walleij --- drivers/gpio/gpio-sch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 424dce8e3f30..8707d4572a06 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -241,7 +241,8 @@ static int __devinit sch_gpio_probe(struct platform_device *pdev) break; default: - return -ENODEV; + err = -ENODEV; + goto err_sch_gpio_core; } sch_gpio_core.dev = &pdev->dev; From f7da0bdbf585c0404fc89901ee4bdb806e70530f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 24 Jul 2012 18:35:16 +0800 Subject: [PATCH 0207/1098] gpio: msic: Fix calculating register address in msic_gpio_to_oreg() In the case offset is 20 ... 23, the equation to get the register should be: INTEL_MSIC_GPIO1HV0CTLO - offset + 20 With above equation, we can get below mapping between offset and the register: offset is 20: INTEL_MSIC_GPIO1HV0CTLO offset is 21: INTEL_MSIC_GPIO1HV1CTLO offset is 22: INTEL_MSIC_GPIO1HV2CTLO offset is 23: INTEL_MSIC_GPIO1HV3CTLO Signed-off-by: Axel Lin Acked-by: Mathias Nyman Signed-off-by: Linus Walleij --- drivers/gpio/gpio-msic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c index 71a838f44501..b38986285868 100644 --- a/drivers/gpio/gpio-msic.c +++ b/drivers/gpio/gpio-msic.c @@ -99,7 +99,7 @@ static int msic_gpio_to_oreg(unsigned offset) if (offset < 20) return INTEL_MSIC_GPIO0HV0CTLO - offset + 16; - return INTEL_MSIC_GPIO1HV0CTLO + offset + 20; + return INTEL_MSIC_GPIO1HV0CTLO - offset + 20; } static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) From 72121572670973bec6fb1b9fdb454b106b253235 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Jul 2012 17:35:39 +0200 Subject: [PATCH 0208/1098] GPIO: gpio-pxa: fix devicetree functions Provide an of_xlate function for the PXA GPIO chips and make it work for devicetree environments. Successfully tested on a PXA3xx board. Signed-off-by: Daniel Mack Acked-by: Haojian Zhuang Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pxa.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 58a6a63a6ece..793767b0962a 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -62,6 +62,7 @@ int pxa_last_gpio; #ifdef CONFIG_OF static struct irq_domain *domain; +static struct device_node *pxa_gpio_of_node; #endif struct pxa_gpio_chip { @@ -277,6 +278,24 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) (value ? GPSR_OFFSET : GPCR_OFFSET)); } +#ifdef CONFIG_OF_GPIO +static int pxa_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (gpiospec->args[0] > pxa_last_gpio) + return -EINVAL; + + if (gc != &pxa_gpio_chips[gpiospec->args[0] / 32].chip) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0] % 32; +} +#endif + static int __devinit pxa_init_gpio_chip(int gpio_end, int (*set_wake)(unsigned int, unsigned int)) { @@ -304,6 +323,11 @@ static int __devinit pxa_init_gpio_chip(int gpio_end, c->get = pxa_gpio_get; c->set = pxa_gpio_set; c->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + c->of_node = pxa_gpio_of_node; + c->of_xlate = pxa_gpio_of_xlate; + c->of_gpio_n_cells = 2; +#endif /* number of GPIOs on last bank may be less than 32 */ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; @@ -505,6 +529,7 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq, const struct irq_domain_ops pxa_irq_domain_ops = { .map = pxa_irq_domain_map, + .xlate = irq_domain_xlate_twocell, }; #ifdef CONFIG_OF @@ -545,6 +570,7 @@ static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev) } domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0, &pxa_irq_domain_ops, NULL); + pxa_gpio_of_node = np; return 0; err: iounmap(gpio_reg_base); From 1d17d17484d40f2d5b35c79518597a2b25296996 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 4 Aug 2012 21:21:14 +0200 Subject: [PATCH 0209/1098] time: Fix adjustment cleanup bug in timekeeping_adjust() Tetsuo Handa reported that sporadically the system clock starts counting up too quickly which is enough to confuse the hangcheck timer to print a bogus stall warning. Commit 2a8c0883 "time: Move xtime_nsec adjustment underflow handling timekeeping_adjust" overlooked this exit path: } else return; which should really be a proper exit sequence, fixing the bug as a side effect. Also make the flow more readable by properly balancing curly braces. Reported-by: Tetsuo Handa wrote: Tested-by: Tetsuo Handa wrote: Signed-off-by: Ingo Molnar Cc: john.stultz@linaro.org Cc: a.p.zijlstra@chello.nl Cc: richardcochran@gmail.com Cc: prarit@redhat.com Link: http://lkml.kernel.org/r/20120804192114.GA28347@gmail.com Signed-off-by: Ingo Molnar --- kernel/time/timekeeping.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2988bc819187..e16af197a2bc 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -923,20 +923,22 @@ static void timekeeping_adjust(struct timekeeper *tk, s64 offset) if (likely(error <= interval)) adj = 1; else - adj = timekeeping_bigadjust(tk, error, &interval, - &offset); - } else if (error < -interval) { - /* See comment above, this is just switched for the negative */ - error >>= 2; - if (likely(error >= -interval)) { - adj = -1; - interval = -interval; - offset = -offset; - } else - adj = timekeeping_bigadjust(tk, error, &interval, - &offset); - } else - return; + adj = timekeeping_bigadjust(tk, error, &interval, &offset); + } else { + if (error < -interval) { + /* See comment above, this is just switched for the negative */ + error >>= 2; + if (likely(error >= -interval)) { + adj = -1; + interval = -interval; + offset = -offset; + } else { + adj = timekeeping_bigadjust(tk, error, &interval, &offset); + } + } else { + goto out_adjust; + } + } if (unlikely(tk->clock->maxadj && (tk->mult + adj > tk->clock->mult + tk->clock->maxadj))) { @@ -999,6 +1001,7 @@ static void timekeeping_adjust(struct timekeeper *tk, s64 offset) tk->xtime_nsec -= offset; tk->ntp_error -= (interval - offset) << tk->ntp_error_shift; +out_adjust: /* * It may be possible that when we entered this function, xtime_nsec * was very small. Further, if we're slightly speeding the clocksource From 439793d4b3c99e550daebd868bbd58967c93d0b3 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 1 Aug 2012 17:01:42 +0300 Subject: [PATCH 0210/1098] KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value When MSR_KVM_PV_EOI_EN was added to msrs_to_save array KVM_SAVE_MSRS_BEGIN was not updated accordingly. Signed-off-by: Gleb Natapov Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42bce48f6928..dce75b760312 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, From e844b990b1df9242bb91b7d490552f3198946838 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 31 Jul 2012 15:35:01 -0700 Subject: [PATCH 0211/1098] drm/i915: Don't forget to apply SNB PIPE_CONTROL GTT workaround. If a buffer that was the target of a PIPE_CONTROL from userland was a reused one that hadn't been evicted which had not previously had this workaround applied, then the early return for a correct presumed_offset in this function meant we would not bind it into the GTT and the write would land somewhere else. Fixes reproducible failures with GL_EXT_timer_query usage in apitrace, and I also expect it to fix the intermittent OQ issues on snb that danvet's been working on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48019 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52932 Signed-off-by: Eric Anholt Reviewed-by: Chris Wilson Reviewed-by: Carl Worth Tested-by: Carl Worth Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 5af631e788c8..ff2819ea0813 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -291,6 +291,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, target_i915_obj = to_intel_bo(target_obj); target_offset = target_i915_obj->gtt_offset; + /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and + * pipe_control writes because the gpu doesn't properly redirect them + * through the ppgtt for non_secure batchbuffers. */ + if (unlikely(IS_GEN6(dev) && + reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION && + !target_i915_obj->has_global_gtt_mapping)) { + i915_gem_gtt_bind_object(target_i915_obj, + target_i915_obj->cache_level); + } + /* The target buffer should have appeared before us in the * exec_object list, so it should have a GTT space bound by now. */ @@ -399,16 +409,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, io_mapping_unmap_atomic(reloc_page); } - /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and - * pipe_control writes because the gpu doesn't properly redirect them - * through the ppgtt for non_secure batchbuffers. */ - if (unlikely(IS_GEN6(dev) && - reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION && - !target_i915_obj->has_global_gtt_mapping)) { - i915_gem_gtt_bind_object(target_i915_obj, - target_i915_obj->cache_level); - } - /* and update the user's relocation entry */ reloc->presumed_offset = target_offset; From e47e9ad9186ff265ddf316d25cd4942bab019d57 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Sat, 28 Jul 2012 18:46:35 +0545 Subject: [PATCH 0212/1098] drm/i915: remove unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the following warning was produced, drivers/gpu/drm/i915/i915_gem_context.c: In function ‘i915_switch_context’: drivers/gpu/drm/i915/i915_gem_context.c:454:6: warning: unused variable ‘ret’ [-Wunused-variable] fix up by removing it Signed-off-by: Devendra Naga Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_context.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index da8b01fb1bf8..a9d58d72bb4d 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -451,7 +451,6 @@ int i915_switch_context(struct intel_ring_buffer *ring, struct drm_i915_file_private *file_priv = NULL; struct i915_hw_context *to; struct drm_i915_gem_object *from_obj = ring->last_context_obj; - int ret; if (dev_priv->hw_contexts_disabled) return 0; From f00f979145756e39b5512d7d4e4050534d1c3d7f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 31 Jul 2012 15:58:13 +1000 Subject: [PATCH 0213/1098] i915: don't map imported dma-bufs for dmar. The exporter should have given us pages in the correct place, avoid the prepare object mapping phase on dmar systems. This fixes an oops on a GM45/R600 machine, when running the intel/radeon tests. Signed-off-by: Dave Airlie Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 9fd25a435536..ee9b68f6bc36 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -361,7 +361,8 @@ int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj) struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - if (dev_priv->mm.gtt->needs_dmar) + /* don't map imported dma buf objects */ + if (dev_priv->mm.gtt->needs_dmar && !obj->sg_table) return intel_gtt_map_memory(obj->pages, obj->base.size >> PAGE_SHIFT, &obj->sg_list, From d796c52ef0b71a988364f6109aeb63d79c5b116b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 5 Aug 2012 19:04:57 -0400 Subject: [PATCH 0214/1098] ext4: make sure the journal sb is written in ext4_clear_journal_err() After we transfer set the EXT4_ERROR_FS bit in the file system superblock, it's not enough to call jbd2_journal_clear_err() to clear the error indication from journal superblock --- we need to call jbd2_journal_update_sb_errno() as well. Otherwise, when the root file system is mounted read-only, the journal is replayed, and the error indicator is transferred to the superblock --- but the s_errno field in the jbd2 superblock is left set (since although we cleared it in memory, we never flushed it out to disk). This can end up confusing e2fsck. We should make e2fsck more robust in this case, but the kernel shouldn't be leaving things in this confused state, either. Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/super.c | 1 + fs/jbd2/journal.c | 3 ++- include/linux/jbd2.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d76ec8277d3f..ccc4bcad5616 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4430,6 +4430,7 @@ static void ext4_clear_journal_err(struct super_block *sb, ext4_commit_super(sb, 1); jbd2_journal_clear_err(journal); + jbd2_journal_update_sb_errno(journal); } } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index e9a3c4c85594..bd23f2ebaa67 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1377,7 +1377,7 @@ static void jbd2_mark_journal_empty(journal_t *journal) * Update a journal's errno. Write updated superblock to disk waiting for IO * to complete. */ -static void jbd2_journal_update_sb_errno(journal_t *journal) +void jbd2_journal_update_sb_errno(journal_t *journal) { journal_superblock_t *sb = journal->j_superblock; @@ -1390,6 +1390,7 @@ static void jbd2_journal_update_sb_errno(journal_t *journal) jbd2_write_superblock(journal, WRITE_SYNC); } +EXPORT_SYMBOL(jbd2_journal_update_sb_errno); /* * Read the superblock for a given journal, performing initial diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index f334c7fab967..3efc43f3f162 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1125,6 +1125,7 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); +extern void jbd2_journal_update_sb_errno(journal_t *); extern void jbd2_journal_update_sb_log_tail (journal_t *, tid_t, unsigned long, int); extern void __jbd2_journal_abort_hard (journal_t *); From 7e731bc9a12339f344cddf82166b82633d99dd86 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 5 Aug 2012 23:28:16 -0400 Subject: [PATCH 0215/1098] ext4: avoid kmemcheck complaint from reading uninitialized memory Commit 03179fe923 introduced a kmemcheck complaint in ext4_da_get_block_prep() because we save and restore ei->i_da_metadata_calc_last_lblock even though it is left uninitialized in the case where i_da_metadata_calc_len is zero. This doesn't hurt anything, but silencing the kmemcheck complaint makes it easier for people to find real bugs. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45631 (which is marked as a regression). Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index ccc4bcad5616..56bcaec9149c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -959,6 +959,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb) ei->i_reserved_meta_blocks = 0; ei->i_allocated_meta_blocks = 0; ei->i_da_metadata_calc_len = 0; + ei->i_da_metadata_calc_last_lblock = 0; spin_lock_init(&(ei->i_block_reservation_lock)); #ifdef CONFIG_QUOTA ei->i_reserved_quota = 0; From faea35dd8a9d3605c411c8ecd7f97f0f9ecbaf58 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?St=C3=A9phane=20Marchesin?= Date: Mon, 30 Jul 2012 13:51:38 -0700 Subject: [PATCH 0216/1098] drm/i915: Make intel_panel_get_backlight static. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This function isn't used outside of intel_panel.c, so make it static. Signed-off-by: Stéphane Marchesin Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_drv.h | 1 - drivers/gpu/drm/i915/intel_panel.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 84353559441c..3afe3550e4ae 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -380,7 +380,6 @@ extern void intel_pch_panel_fitting(struct drm_device *dev, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); extern u32 intel_panel_get_max_backlight(struct drm_device *dev); -extern u32 intel_panel_get_backlight(struct drm_device *dev); extern void intel_panel_set_backlight(struct drm_device *dev, u32 level); extern int intel_panel_setup_backlight(struct drm_device *dev); extern void intel_panel_enable_backlight(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 10c7d39034e1..9474488db948 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -213,7 +213,7 @@ static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val) return val; } -u32 intel_panel_get_backlight(struct drm_device *dev) +static u32 intel_panel_get_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 val; From bcf9dcc1e6269fac674e41f25d007ff75f76e840 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 15 Jul 2012 09:42:38 +0100 Subject: [PATCH 0217/1098] drm/i915: Workaround hang with BSD and forcewake on SandyBridge For reasons that are not apparent to anybody, 990bbdadaba (drm/i915: Group the GT routines together in both code and vtable) breaks the use of the BitStream Decoder ring on SandyBridge. The active ingredient of that patch is the conversion from a udelay(10) to a udelay(1) in the busy-wait loop of waiting for the forcewake acknowledge. If we restore that udelay(10) or insert another udelay(1) afterwards (or any wait longer than 250ns) everything works again. An alternative is also to remove any delay from the busy-wait loop. Given that in the atomic sections we want to complete the wait as quick as possible to avoid blocking the CPU for too long, it makes sense to remove the delay altogether and simply spin on the exit condition until it completes. So we replace the udelay(1) with cpu_relax(). Papers over regression from commit 990bbdadabaa51828e475eda86ee5720a4910cc3 Author: Chris Wilson Date: Mon Jul 2 11:51:02 2012 -0300 drm/i915: Group the GT routines together in both code and vtable Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51738 Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_drv.h | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 3afe3550e4ae..132ab511b90c 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -46,15 +46,16 @@ }) #define wait_for_atomic_us(COND, US) ({ \ - int i, ret__ = -ETIMEDOUT; \ - for (i = 0; i < (US); i++) { \ - if ((COND)) { \ - ret__ = 0; \ - break; \ - } \ - udelay(1); \ - } \ - ret__; \ + unsigned long timeout__ = jiffies + usecs_to_jiffies(US); \ + int ret__ = 0; \ + while (!(COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + cpu_relax(); \ + } \ + ret__; \ }) #define wait_for(COND, MS) _wait_for(COND, MS, 1) From 4407be6ba217514b1bc01488f8b56467d309e416 Mon Sep 17 00:00:00 2001 From: "Philipp A. Mohrenweiser" Date: Mon, 6 Aug 2012 13:14:18 +0200 Subject: [PATCH 0218/1098] ALSA: hda - add dock support for Thinkpad T430s Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow sound in docking station. Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3 Cc: stable@kernel.org Signed-off-by: Philipp A. Mohrenweiser Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b9a5c4503336..bb93f927f7be 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6207,6 +6207,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K), From 8dfaa573918afa34c8eaf8b2120b2e38cc4f651f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 6 Aug 2012 14:49:36 +0200 Subject: [PATCH 0219/1098] ALSA: hda - Fix regression of HDMI codec probing The commit c4bfe94a causes a regression on some codecs at probing. Since this was just a workaround to shut up a kernel warning, it'd be better to revert and fix properly. So we ended up with re-adding the cleanup callback. Tested-and-reported-by: Matt Horan Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 69b928449789..8f23374fa642 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -877,8 +877,6 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, struct hdmi_eld *eld; struct hdmi_spec_per_cvt *per_cvt = NULL; - hinfo->nid = 0; /* clear the leftover value */ - /* Validate hinfo */ pin_idx = hinfo_to_pin_index(spec, hinfo); if (snd_BUG_ON(pin_idx < 0)) @@ -1163,6 +1161,14 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, return hdmi_setup_stream(codec, cvt_nid, pin_nid, stream_tag, format); } +static int generic_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + snd_hda_codec_cleanup_stream(codec, hinfo->nid); + return 0; +} + static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, struct hda_codec *codec, struct snd_pcm_substream *substream) @@ -1202,6 +1208,7 @@ static const struct hda_pcm_ops generic_ops = { .open = hdmi_pcm_open, .close = hdmi_pcm_close, .prepare = generic_hdmi_playback_pcm_prepare, + .cleanup = generic_hdmi_playback_pcm_cleanup, }; static int generic_hdmi_build_pcms(struct hda_codec *codec) @@ -1220,7 +1227,6 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec) pstr = &info->stream[SNDRV_PCM_STREAM_PLAYBACK]; pstr->substreams = 1; pstr->ops = generic_ops; - pstr->nid = 1; /* FIXME: just for avoiding a debug WARNING */ /* other pstr fields are set in open */ } From e4651a9ff469935687778219f8ab43a8e715dd05 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Aug 2012 09:52:52 +0200 Subject: [PATCH 0220/1098] MAINTAINERS: update entry for Linus Walleij I prefer to use the Linaro mail address for the MAINTAINERS entry due to heavy mail traffic. Take this opportunity to update the wildcards, including removing the stmpe* drivers from the ux500 entry since these are not specific to that machine. Cc: Srinidhi Kasagar Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- MAINTAINERS | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e94..b694a9d4e3ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -925,14 +925,14 @@ S: Maintained ARM/NOMADIK ARCHITECTURE M: Alessandro Rubini -M: Linus Walleij +M: Linus Walleij M: STEricsson L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ F: arch/arm/plat-nomadik/ F: drivers/i2c/busses/i2c-nomadik.c -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT M: Nelson Castillo @@ -1146,7 +1146,7 @@ F: drivers/usb/host/ehci-w90x900.c F: drivers/video/nuc900fb.c ARM/U300 MACHINE SUPPORT -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: arch/arm/mach-u300/ @@ -1161,15 +1161,20 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/Ux500 ARM ARCHITECTURE M: Srinidhi Kasagar -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ux500/ +F: drivers/clocksource/clksrc-dbx500-prcmu.c F: drivers/dma/ste_dma40* +F: drivers/hwspinlock/u8500_hsem.c F: drivers/mfd/abx500* F: drivers/mfd/ab8500* -F: drivers/mfd/stmpe* +F: drivers/mfd/dbx500* +F: drivers/mfd/db8500* +F: drivers/pinctrl/pinctrl-nomadik* F: drivers/rtc/rtc-ab8500.c +F: drivers/rtc/rtc-pl031.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/VFP SUPPORT @@ -3094,7 +3099,7 @@ F: include/linux/gigaset_dev.h GPIO SUBSYSTEM M: Grant Likely -M: Linus Walleij +M: Linus Walleij S: Maintained T: git git://git.secretlab.ca/git/linux-2.6.git F: Documentation/gpio.txt From 1adb7d31b051cd97fbb75c46772b00c13ec29c9e Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 6 Aug 2012 14:18:42 +0200 Subject: [PATCH 0221/1098] iommu/amd: Fix pci_request_acs() call-place The pci_request_acs() function needs to be called before PCI probing to be effective. So move it to another call-place to ensure that. Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 500e7f15f5c2..0a2ea317120a 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1131,9 +1131,6 @@ static int __init amd_iommu_init_pci(void) break; } - /* Make sure ACS will be enabled */ - pci_request_acs(); - ret = amd_iommu_init_devices(); print_iommu_info(); @@ -1652,6 +1649,9 @@ static bool detect_ivrs(void) early_acpi_os_unmap_memory((char __iomem *)ivrs_base, ivrs_size); + /* Make sure ACS will be enabled during PCI probe */ + pci_request_acs(); + return true; } From a4ff1fc2ccbd81e83ac51ea44570caa361c666af Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Sat, 4 Aug 2012 12:08:55 -0600 Subject: [PATCH 0222/1098] iommu/intel: Fix ACS path checking SR-IOV can create buses without a bridge. There may be other cases where this happens as well. In these cases skip to the parent bus and continue testing devices there. Signed-off-by: Alex Williamson Tested-by: David Ahern Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 0204b62480b0..2297ec193eb4 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4125,8 +4125,13 @@ static int intel_iommu_add_device(struct device *dev) } else dma_pdev = pci_dev_get(pdev); + /* Account for quirked devices */ swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev)); + /* + * If it's a multifunction device that does not support our + * required ACS flags, add to the same group as function 0. + */ if (dma_pdev->multifunction && !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)) swap_pci_ref(&dma_pdev, @@ -4134,14 +4139,28 @@ static int intel_iommu_add_device(struct device *dev) PCI_DEVFN(PCI_SLOT(dma_pdev->devfn), 0))); + /* + * Devices on the root bus go through the iommu. If that's not us, + * find the next upstream device and test ACS up to the root bus. + * Finding the next device may require skipping virtual buses. + */ while (!pci_is_root_bus(dma_pdev->bus)) { - if (pci_acs_path_enabled(dma_pdev->bus->self, - NULL, REQ_ACS_FLAGS)) + struct pci_bus *bus = dma_pdev->bus; + + while (!bus->self) { + if (!pci_is_root_bus(bus)) + bus = bus->parent; + else + goto root_bus; + } + + if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS)) break; - swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self)); + swap_pci_ref(&dma_pdev, pci_dev_get(bus->self)); } +root_bus: group = iommu_group_get(&dma_pdev->dev); pci_dev_put(dma_pdev); if (!group) { From 31fe943599b7e5870edb9decb7fbb9538b218f26 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Sat, 4 Aug 2012 12:09:03 -0600 Subject: [PATCH 0223/1098] iommu/amd: Fix ACS path checking SR-IOV can create buses without a bridge. There may be other cases where this happens as well. In these cases skip to the parent bus and continue testing devices there. Signed-off-by: Alex Williamson Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 6d1cbdfc9b2a..b64502dfa9f4 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -296,8 +296,13 @@ static int iommu_init_device(struct device *dev) } else dma_pdev = pci_dev_get(pdev); + /* Account for quirked devices */ swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev)); + /* + * If it's a multifunction device that does not support our + * required ACS flags, add to the same group as function 0. + */ if (dma_pdev->multifunction && !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)) swap_pci_ref(&dma_pdev, @@ -305,14 +310,28 @@ static int iommu_init_device(struct device *dev) PCI_DEVFN(PCI_SLOT(dma_pdev->devfn), 0))); + /* + * Devices on the root bus go through the iommu. If that's not us, + * find the next upstream device and test ACS up to the root bus. + * Finding the next device may require skipping virtual buses. + */ while (!pci_is_root_bus(dma_pdev->bus)) { - if (pci_acs_path_enabled(dma_pdev->bus->self, - NULL, REQ_ACS_FLAGS)) + struct pci_bus *bus = dma_pdev->bus; + + while (!bus->self) { + if (!pci_is_root_bus(bus)) + bus = bus->parent; + else + goto root_bus; + } + + if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS)) break; - swap_pci_ref(&dma_pdev, pci_dev_get(dma_pdev->bus->self)); + swap_pci_ref(&dma_pdev, pci_dev_get(bus->self)); } +root_bus: group = iommu_group_get(&dma_pdev->dev); pci_dev_put(dma_pdev); if (!group) { From fb6ccff667712c46b4501b920ea73a326e49626a Mon Sep 17 00:00:00 2001 From: Zach Brown Date: Tue, 24 Jul 2012 12:10:11 -0700 Subject: [PATCH 0224/1098] fuse: verify all ioctl retry iov elements Commit 7572777eef78ebdee1ecb7c258c0ef94d35bad16 attempted to verify that the total iovec from the client doesn't overflow iov_length() but it only checked the first element. The iovec could still overflow by starting with a small element. The obvious fix is to check all the elements. The overflow case doesn't look dangerous to the kernel as the copy is limited by the length after the overflow. This fix restores the intention of returning an error instead of successfully copying less than the iovec represented. I found this by code inspection. I built it but don't have a test case. I'm cc:ing stable because the initial commit did as well. Signed-off-by: Zach Brown Signed-off-by: Miklos Szeredi CC: [2.6.37+] --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 5800101e5ce1..2eed3acfb6a6 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1703,7 +1703,7 @@ static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count) size_t n; u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT; - for (n = 0; n < count; n++) { + for (n = 0; n < count; n++, iov++) { if (iov->iov_len > (size_t) max) return -ENOMEM; max -= iov->iov_len; From 5ab3633d6907018b0b830a720e877c3884d679c3 Mon Sep 17 00:00:00 2001 From: Hunt Xu Date: Sun, 1 Jul 2012 03:45:07 +0000 Subject: [PATCH 0225/1098] drm/i915: make rc6 in sysfs functions conditional Commit 0136db586c028f71e7cc21cc183064ff0d5919c8 merges rc6 information into the power group. However, when compiled with CONFIG_PM not set, modprobing i915 would taint since power_group_name is defined as NULL. This patch makes these rc6 in sysfs functions conditional upon the definition of the CONFIG_PM macro to avoid the above-mentioned problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45181 Cc: stable@vger.kernel.org Tested-by: Kris Karas Signed-off-by: Hunt Xu Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_sysfs.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c index 2f5388af8df9..7631807a2788 100644 --- a/drivers/gpu/drm/i915/i915_sysfs.c +++ b/drivers/gpu/drm/i915/i915_sysfs.c @@ -32,6 +32,7 @@ #include "intel_drv.h" #include "i915_drv.h" +#ifdef CONFIG_PM static u32 calc_residency(struct drm_device *dev, const u32 reg) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -224,3 +225,14 @@ void i915_teardown_sysfs(struct drm_device *dev) device_remove_bin_file(&dev->primary->kdev, &dpf_attrs); sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group); } +#else +void i915_setup_sysfs(struct drm_device *dev) +{ + return; +} + +void i915_teardown_sysfs(struct drm_device *dev) +{ + return; +} +#endif /* CONFIG_PM */ From 8bb8148c78317e9360a21a0e69a58be6862adb07 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 5 Aug 2012 22:37:55 +0200 Subject: [PATCH 0226/1098] ARM: integrator: use clk_prepare_enable() for timer The Integrator timer is using the clock framework to get the timer frequency, but missed to prepare the clock before enabling. Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-integrator/integrator_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b9..3b2267529f5e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); From 61c964ba1748e984cb232b431582815899bf10fe Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Tue, 10 Jul 2012 14:07:38 -0500 Subject: [PATCH 0227/1098] Bluetooth: btusb: Add vendor specific ID (0a5c:21f4) BCM20702A0 Patch adds support for BCM20702A0 device id (0a5c:21f4). usb-devices after patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) usb-devices before patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Manoj Iyer Tested-by: Chris Gagnon Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e27221411036..da6aa390d950 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -98,6 +98,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, { USB_DEVICE(0x0a5c, 0x21f3) }, + { USB_DEVICE(0x0a5c, 0x21f4) }, { USB_DEVICE(0x413c, 0x8197) }, /* Foxconn - Hon Hai */ From 269c4845d5b3627b95b1934107251bacbe99bb68 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Fri, 15 Jun 2012 02:30:20 -0300 Subject: [PATCH 0228/1098] Bluetooth: Fix possible deadlock in SCO code sco_chan_del() only has conn != NULL when called from sco_conn_del() so just move the code from it that deal with conn to sco_conn_del(). [ 120.765529] [ 120.765529] ====================================================== [ 120.766529] [ INFO: possible circular locking dependency detected ] [ 120.766529] 3.5.0-rc1-10292-g3701f94-dirty #70 Tainted: G W [ 120.766529] ------------------------------------------------------- [ 120.766529] kworker/u:3/1497 is trying to acquire lock: [ 120.766529] (&(&conn->lock)->rlock#2){+.+...}, at: [] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [ 120.766529] but task is already holding lock: [ 120.766529] (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [] sco_conn_del+0x61/0xe0 [bluetooth] [ 120.766529] [ 120.766529] which lock already depends on the new lock. [ 120.766529] [ 120.766529] [ 120.766529] the existing dependency chain (in reverse order) is: [ 120.766529] [ 120.766529] -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [ 120.766529] [] lock_acquire+0x8e/0xb0 [ 120.766529] [] _raw_spin_lock+0x40/0x80 [ 120.766529] [] sco_connect_cfm+0x79/0x300 [bluetooth] [ 120.766529] [] hci_sync_conn_complete_evt.isra.90+0x343/0x400 [bluetooth] [ 120.766529] [] hci_event_packet+0x317/0xfb0 [bluetooth] [ 120.766529] [] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [] process_one_work+0x197/0x460 [ 120.766529] [] worker_thread+0x126/0x2d0 [ 120.766529] [] kthread+0x9d/0xb0 [ 120.766529] [] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] -> #0 (&(&conn->lock)->rlock#2){+.+...}: [ 120.766529] [] __lock_acquire+0x154a/0x1d30 [ 120.766529] [] lock_acquire+0x8e/0xb0 [ 120.766529] [] _raw_spin_lock+0x40/0x80 [ 120.766529] [] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [] sco_conn_del+0x74/0xe0 [bluetooth] [ 120.766529] [] sco_disconn_cfm+0x32/0x60 [bluetooth] [ 120.766529] [] hci_disconn_complete_evt.isra.53+0x242/0x390 [bluetooth] [ 120.766529] [] hci_event_packet+0x617/0xfb0 [bluetooth] [ 120.766529] [] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [] process_one_work+0x197/0x460 [ 120.766529] [] worker_thread+0x126/0x2d0 [ 120.766529] [] kthread+0x9d/0xb0 [ 120.766529] [] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] other info that might help us debug this: [ 120.766529] [ 120.766529] Possible unsafe locking scenario: [ 120.766529] [ 120.766529] CPU0 CPU1 [ 120.766529] ---- ---- [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] [ 120.766529] *** DEADLOCK *** Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 40bbe25dcff7..3589e21edb09 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -131,6 +131,15 @@ static int sco_conn_del(struct hci_conn *hcon, int err) sco_sock_clear_timer(sk); sco_chan_del(sk, err); bh_unlock_sock(sk); + + sco_conn_lock(conn); + conn->sk = NULL; + sco_pi(sk)->conn = NULL; + sco_conn_unlock(conn); + + if (conn->hcon) + hci_conn_put(conn->hcon); + sco_sock_kill(sk); } @@ -821,16 +830,6 @@ static void sco_chan_del(struct sock *sk, int err) BT_DBG("sk %p, conn %p, err %d", sk, conn, err); - if (conn) { - sco_conn_lock(conn); - conn->sk = NULL; - sco_pi(sk)->conn = NULL; - sco_conn_unlock(conn); - - if (conn->hcon) - hci_conn_put(conn->hcon); - } - sk->sk_state = BT_CLOSED; sk->sk_err = err; sk->sk_state_change(sk); From a9ea3ed9b71cc3271dd59e76f65748adcaa76422 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 19 Jul 2012 14:46:08 +0200 Subject: [PATCH 0229/1098] Bluetooth: Fix legacy pairing with some devices Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by: Szymon Janc Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 7 ++++++- net/bluetooth/l2cap_core.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 41ff978a33f9..248632cec11d 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1762,7 +1762,12 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (conn->type == ACL_LINK) { conn->state = BT_CONFIG; hci_conn_hold(conn); - conn->disc_timeout = HCI_DISCONN_TIMEOUT; + + if (!conn->out && !hci_conn_ssp_enabled(conn) && + !hci_find_link_key(hdev, &ev->bdaddr)) + conn->disc_timeout = HCI_PAIRING_TIMEOUT; + else + conn->disc_timeout = HCI_DISCONN_TIMEOUT; } else conn->state = BT_CONNECTED; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index a8964db04bfb..daa149b7003c 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1181,6 +1181,7 @@ static void l2cap_le_conn_ready(struct l2cap_conn *conn) sk = chan->sk; hci_conn_hold(conn->hcon); + conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT; bacpy(&bt_sk(sk)->src, conn->src); bacpy(&bt_sk(sk)->dst, conn->dst); From c810089c27e48b816181b454fcc493d19fdbc2ba Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:09 +0300 Subject: [PATCH 0230/1098] Bluetooth: Fix using NULL inquiry entry If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 248632cec11d..b64cfa213bd6 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1365,6 +1365,9 @@ static bool hci_resolve_next_name(struct hci_dev *hdev) return false; e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED); + if (!e) + return false; + if (hci_resolve_name(hdev, e) == 0) { e->name_state = NAME_PENDING; return true; From 7cc8380eb10347016d95bf6f9d842c2ae6d12932 Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:10 +0300 Subject: [PATCH 0231/1098] Bluetooth: Fix using a NULL inquiry cache entry If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index b64cfa213bd6..fe9a3d6d30b0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1396,12 +1396,18 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn, return; e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING); - if (e) { + /* If the device was not found in a list of found devices names of which + * are pending. there is no need to continue resolving a next name as it + * will be done upon receiving another Remote Name Request Complete + * Event */ + if (!e) + return; + + list_del(&e->list); + if (name) { e->name_state = NAME_KNOWN; - list_del(&e->list); - if (name) - mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, - e->data.rssi, name, name_len); + mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, + e->data.rssi, name, name_len); } if (hci_resolve_next_name(hdev)) From c3e7c0d90b14a3e7ac091d24cef09efb516d587b Mon Sep 17 00:00:00 2001 From: Ram Malovany Date: Thu, 19 Jul 2012 10:26:11 +0300 Subject: [PATCH 0232/1098] Bluetooth: Set name_state to unknown when entry name is empty When the name of the given entry is empty , the state needs to be updated accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index fe9a3d6d30b0..715d7e33fba0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1408,6 +1408,8 @@ static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn, e->name_state = NAME_KNOWN; mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00, e->data.rssi, name, name_len); + } else { + e->name_state = NAME_NOT_KNOWN; } if (hci_resolve_next_name(hdev)) From d08fd0e712a834d4abb869c0215a702e290bc51e Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 19 Jul 2012 17:03:43 +0300 Subject: [PATCH 0233/1098] Bluetooth: smp: Fix possible NULL dereference smp_chan_create might return NULL so we need to check before dereferencing smp. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- net/bluetooth/smp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 16ef0dc85a0a..901a616c8083 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -579,8 +579,11 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) if (!test_and_set_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) smp = smp_chan_create(conn); + else + smp = conn->smp_chan; - smp = conn->smp_chan; + if (!smp) + return SMP_UNSPECIFIED; smp->preq[0] = SMP_CMD_PAIRING_REQ; memcpy(&smp->preq[1], req, sizeof(*req)); From 49dfbb9129c4edb318578de35cc45c555df37884 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 19 Jul 2012 12:54:04 +0530 Subject: [PATCH 0234/1098] Bluetooth: Fix socket not getting freed if l2cap channel create fails If l2cap_chan_create() fails then it will return from l2cap_sock_kill since zapped flag of sk is reset. Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/l2cap_sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index a4bb27e8427e..b94abd30e6f9 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -1174,7 +1174,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p chan = l2cap_chan_create(); if (!chan) { - l2cap_sock_kill(sk); + sk_free(sk); return NULL; } From 1f6fc43e621167492ed4b7f3b4269c584c3d6ccc Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 2 Aug 2012 18:41:48 +0100 Subject: [PATCH 0235/1098] cfg80211: process pending events when unregistering net device libertas currently calls cfg80211_disconnected() when it is being brought down. This causes an event to be allocated, but since the wdev is already removed from the rdev by the time that the event processing work executes, the event is never processed or freed. http://article.gmane.org/gmane.linux.kernel.wireless.general/95666 Fix this leak, and other possible situations, by processing the event queue when a device is being unregistered. Thanks to Johannes Berg for the suggestion. Signed-off-by: Daniel Drake Cc: stable@vger.kernel.org Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.c | 5 +++++ net/wireless/core.h | 1 + net/wireless/util.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 31b40cc4a9c3..dcd64d5b07aa 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -952,6 +952,11 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, */ synchronize_rcu(); INIT_LIST_HEAD(&wdev->list); + /* + * Ensure that all events have been processed and + * freed. + */ + cfg80211_process_wdev_events(wdev); break; case NETDEV_PRE_UP: if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype))) diff --git a/net/wireless/core.h b/net/wireless/core.h index 5206c6844fd7..bc7430b54771 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -426,6 +426,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev, struct net_device *dev, enum nl80211_iftype ntype, u32 *flags, struct vif_params *params); void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev); +void cfg80211_process_wdev_events(struct wireless_dev *wdev); int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, diff --git a/net/wireless/util.c b/net/wireless/util.c index 26f8cd30f712..994e2f0cc7a8 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -735,7 +735,7 @@ void cfg80211_upload_connect_keys(struct wireless_dev *wdev) wdev->connect_keys = NULL; } -static void cfg80211_process_wdev_events(struct wireless_dev *wdev) +void cfg80211_process_wdev_events(struct wireless_dev *wdev) { struct cfg80211_event *ev; unsigned long flags; From deee0214def5d8a32b8112f11d9c2b1696e9c0cb Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 3 Aug 2012 12:49:14 +0200 Subject: [PATCH 0236/1098] rt61pci: fix NULL pointer dereference in config_lna_gain We can not pass NULL libconf->conf->channel to rt61pci_config() as it is dereferenced unconditionally in rt61pci_config_lna_gain() subroutine. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=44361 Cc: stable@vger.kernel.org Reported-and-tested-by: Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt61pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f32259686b45..3f7bc5cadf9a 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2243,8 +2243,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev) { - struct ieee80211_conf conf = { .flags = 0 }; - struct rt2x00lib_conf libconf = { .conf = &conf }; + struct rt2x00lib_conf libconf = { .conf = &rt2x00dev->hw->conf }; rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); } From 50e2a30cf6fcaeb2d27360ba614dd169a10041c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 5 Aug 2012 18:31:46 +0200 Subject: [PATCH 0237/1098] iwlwifi: disable greenfield transmissions as a workaround There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Tested-by: Cesar Eduardo Barros Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/dvm/rs.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 6fddd2785e6e..a82f46c10f5e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -707,11 +707,14 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, */ static bool rs_use_green(struct ieee80211_sta *sta) { - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && - !(ctx->ht.non_gf_sta_present); + /* + * There's a bug somewhere in this code that causes the + * scaling to get stuck because GF+SGI can't be combined + * in SISO rates. Until we find that bug, disable GF, it + * has only limited benefit and we still interoperate with + * GF APs since we can always receive GF transmissions. + */ + return false; } /** From 2096ae6ca647302d50a68aa36cb66a00e7dfac70 Mon Sep 17 00:00:00 2001 From: Peng Chen Date: Wed, 1 Aug 2012 10:11:59 +0800 Subject: [PATCH 0238/1098] Bluetooth: add support for atheros 0489:e057 Add support for the AR3012 chip found on Fioxconn. usb-devices shows: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e057 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peng Chen Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 10308cd8a7ed..11f36e502136 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -79,6 +79,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, + { USB_DEVICE(0x0489, 0xe057) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -104,6 +105,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index da6aa390d950..cef3bac1a543 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, From 25099335944a23db75d4916644122c746684e093 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 4 Aug 2012 00:14:25 +0000 Subject: [PATCH 0239/1098] mISDN: Bugfix for layer2 fixed TEI mode If a fixed TEI is used, the initial state of the layer 2 statmachine need to be 4 (TEI assigned). This was true only for Point to Point connections, but not for the other fixed TEIs. It was not found before, because usually only the TEI 0 is used as fixed TEI for PtP mode, but if you try X31 packet mode connections with SAPI 16, TEI 1, it did fail. Signed-off-by: Karsten Keil Cc: # 3.5.x Signed-off-by: David S. Miller --- drivers/isdn/mISDN/layer2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c index 0dc8abca1407..949cabb88f1c 100644 --- a/drivers/isdn/mISDN/layer2.c +++ b/drivers/isdn/mISDN/layer2.c @@ -2222,7 +2222,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, int tei, InitWin(l2); l2->l2m.fsm = &l2fsm; if (test_bit(FLG_LAPB, &l2->flag) || - test_bit(FLG_PTP, &l2->flag) || + test_bit(FLG_FIXED_TEI, &l2->flag) || test_bit(FLG_LAPD_NET, &l2->flag)) l2->l2m.state = ST_L2_4; else From caa0bf648cd20a2efbb6558531711e9ce2c6e948 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Sat, 4 Aug 2012 04:13:26 +0000 Subject: [PATCH 0240/1098] batman-adv: select an internet gateway if none was chosen MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a regression introduced by: 2265c141086474bbae55a5bb3afa1ebb78ccaa7c ("batman-adv: gateway election code refactoring") Reported-by: Nicolás Echániz Signed-off-by: Marek Lindner Acked-by: Antonio Quartulli Signed-off-by: Antonio Quartulli Signed-off-by: David S. Miller --- net/batman-adv/gateway_client.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index b421cc49d2cd..fc866f2e4528 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -200,11 +200,11 @@ void batadv_gw_election(struct batadv_priv *bat_priv) if (atomic_read(&bat_priv->gw_mode) != BATADV_GW_MODE_CLIENT) goto out; - if (!batadv_atomic_dec_not_zero(&bat_priv->gw_reselect)) - goto out; - curr_gw = batadv_gw_get_selected_gw_node(bat_priv); + if (!batadv_atomic_dec_not_zero(&bat_priv->gw_reselect) && curr_gw) + goto out; + next_gw = batadv_gw_get_best_gw_node(bat_priv); if (curr_gw == next_gw) From 7cefdd1f55ec075f1f2da0a321495d5a8262ffaa Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 06:50:49 +0000 Subject: [PATCH 0241/1098] drivers/net/phy/mdio-mux-gpio.c: drop devm_kfree of devm_kzalloc'd data devm_kfree should not have to be explicitly used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,d; @@ x = devm_kzalloc(...) ... ?-devm_kfree(d,x); // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux-gpio.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index e0cc4ef33dee..eefe49e8713c 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -101,7 +101,6 @@ err: n--; gpio_free(s->gpio[n]); } - devm_kfree(&pdev->dev, s); return r; } From 8e7dfbc8d1ea9ca9058aa641a8fe795ebca320e2 Mon Sep 17 00:00:00 2001 From: Silviu-Mihai Popescu Date: Sat, 4 Aug 2012 09:31:29 +0000 Subject: [PATCH 0242/1098] tcp_output: fix sparse warning for tcp_wfree Fix sparse warning: * symbol 'tcp_wfree' was not declared. Should it be static? Signed-off-by: Silviu-Mihai Popescu Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index a7b3ec9b6c3e..20dfd892c86f 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -940,7 +940,7 @@ void __init tcp_tasklet_init(void) * We cant xmit new skbs from this context, as we might already * hold qdisc lock. */ -void tcp_wfree(struct sk_buff *skb) +static void tcp_wfree(struct sk_buff *skb) { struct sock *sk = skb->sk; struct tcp_sock *tp = tcp_sk(sk); From f716168b8aee528cf685246f0e7247aa0d08b79c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 23:52:36 +0000 Subject: [PATCH 0243/1098] drivers/atm/iphase.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index d4386019af5d..96cce6d53195 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2362,7 +2362,7 @@ static int __devinit ia_init(struct atm_dev *dev) { printk(DEV_LABEL " (itf %d): can't set up page mapping\n", dev->number); - return error; + return -ENOMEM; } IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", dev->number, iadev->pci->revision, base, iadev->irq);) From 8b82f7c3c90fa67fd6d5be1deb3cec0e17cc32d9 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 10:30:11 +0000 Subject: [PATCH 0244/1098] ixp4xx_eth: fix ptp_ixp46x build failure When building with ixp4xx_eth and ptp_ixp46x as module, one is getting the following error: ERROR: "ixp46x_phc_index" [drivers/ptp/ptp_ixp46x.ko] undefined! This has been introduced by commit 509a7c25729feab353502e1b544c614772a1d49a. Signed-off-by: Arnaud Patard Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ixp4xx_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 482648fcf0b6..98934bdf6acf 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1003,6 +1003,7 @@ static int ixp4xx_nway_reset(struct net_device *dev) } int ixp46x_phc_index = -1; +EXPORT_SYMBOL_GPL(ixp46x_phc_index); static int ixp4xx_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) From 91d27a8650d5359a7a320daeb35b88cdea15e3a8 Mon Sep 17 00:00:00 2001 From: Sorin Dumitru Date: Mon, 6 Aug 2012 02:35:58 +0000 Subject: [PATCH 0245/1098] llc: free the right skb We are freeing skb instead of nskb, resulting in a double free on skb and a leak from nskb. Signed-off-by: Sorin Dumitru Signed-off-by: David S. Miller --- net/llc/llc_station.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 39a8d8924b9c..6828e39ec2ec 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -268,7 +268,7 @@ static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb) out: return rc; free: - kfree_skb(skb); + kfree_skb(nskb); goto out; } @@ -293,7 +293,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb) out: return rc; free: - kfree_skb(skb); + kfree_skb(nskb); goto out; } @@ -322,7 +322,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb) out: return rc; free: - kfree_skb(skb); + kfree_skb(nskb); goto out; } From 9871f1ad677d95ffeca80e2c21b70af9bfc9cc91 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Mon, 6 Aug 2012 03:55:29 +0000 Subject: [PATCH 0246/1098] ip: fix error handling in ip_finish_output2() __neigh_create() returns either a pointer to struct neighbour or PTR_ERR(). But the caller expects it to return either a pointer or NULL. Replace the NULL check with IS_ERR() check. The bug was introduced in a263b3093641fb1ec377582c90986a7fd0625184 ("ipv4: Make neigh lookups directly in output packet path."). Signed-off-by: Vasily Kulikov Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index ba39a52d18c1..76dde25fb9a0 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -197,7 +197,7 @@ static inline int ip_finish_output2(struct sk_buff *skb) neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); - if (neigh) { + if (!IS_ERR(neigh)) { int res = dst_neigh_output(dst, neigh, skb); rcu_read_unlock_bh(); From 47fd92f5a76eb3f5b407773766e7d7fa1a179419 Mon Sep 17 00:00:00 2001 From: Hiroaki SHIMODA Date: Mon, 6 Aug 2012 05:45:48 +0000 Subject: [PATCH 0247/1098] net_sched: act: Delete estimator in error path. Some action modules free struct tcf_common in their error path while estimator is still active. This results in est_timer() dereference freed memory. Add gen_kill_estimator() in ipt, pedit and simple action. Signed-off-by: Hiroaki SHIMODA Signed-off-by: David S. Miller --- net/sched/act_ipt.c | 7 ++++++- net/sched/act_pedit.c | 5 ++++- net/sched/act_simple.c | 5 ++++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c index 60e281ad0f07..58fb3c7aab9e 100644 --- a/net/sched/act_ipt.c +++ b/net/sched/act_ipt.c @@ -185,7 +185,12 @@ err3: err2: kfree(tname); err1: - kfree(pc); + if (ret == ACT_P_CREATED) { + if (est) + gen_kill_estimator(&pc->tcfc_bstats, + &pc->tcfc_rate_est); + kfree_rcu(pc, tcfc_rcu); + } return err; } diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 26aa2f6ce257..45c53ab067a6 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -74,7 +74,10 @@ static int tcf_pedit_init(struct nlattr *nla, struct nlattr *est, p = to_pedit(pc); keys = kmalloc(ksize, GFP_KERNEL); if (keys == NULL) { - kfree(pc); + if (est) + gen_kill_estimator(&pc->tcfc_bstats, + &pc->tcfc_rate_est); + kfree_rcu(pc, tcfc_rcu); return -ENOMEM; } ret = ACT_P_CREATED; diff --git a/net/sched/act_simple.c b/net/sched/act_simple.c index 3922f2a2821b..3714f60f0b3c 100644 --- a/net/sched/act_simple.c +++ b/net/sched/act_simple.c @@ -131,7 +131,10 @@ static int tcf_simp_init(struct nlattr *nla, struct nlattr *est, d = to_defact(pc); ret = alloc_defdata(d, defdata); if (ret < 0) { - kfree(pc); + if (est) + gen_kill_estimator(&pc->tcfc_bstats, + &pc->tcfc_rate_est); + kfree_rcu(pc, tcfc_rcu); return ret; } d->tcf_action = parm->action; From b5497eeb37d7d4a5a61b91f64efedc90d1ad6fa3 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Mon, 6 Aug 2012 07:51:16 +0000 Subject: [PATCH 0248/1098] net: Use PTR_RET rather than if(IS_ERR(.. [1] The semantic patch that makes this change is available in scripts/coccinelle/api/ptr_ret.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: David S. Miller --- drivers/net/appletalk/cops.c | 4 +--- drivers/net/appletalk/ltpc.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 545c09ed9079..cff6f023c03a 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -996,9 +996,7 @@ static int __init cops_module_init(void) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", cardname); cops_dev = cops_probe(-1); - if (IS_ERR(cops_dev)) - return PTR_ERR(cops_dev); - return 0; + return PTR_RET(cops_dev); } static void __exit cops_module_exit(void) diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 0910dce3996d..b5782cdf0bca 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1243,9 +1243,7 @@ static int __init ltpc_module_init(void) "ltpc: Autoprobing is not recommended for modules\n"); dev_ltpc = ltpc_probe(); - if (IS_ERR(dev_ltpc)) - return PTR_ERR(dev_ltpc); - return 0; + return PTR_RET(dev_ltpc); } module_init(ltpc_module_init); #endif From 5d299f3d3c8a2fbc732b1bf03af36333ccec3130 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 6 Aug 2012 05:09:33 +0000 Subject: [PATCH 0249/1098] net: ipv6: fix TCP early demux IPv6 needs a cookie in dst_check() call. We need to add rx_dst_cookie and provide a family independent sk_rx_dst_set(sk, skb) method to properly support IPv6 TCP early demux. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/ipv6.h | 1 + include/net/inet_connection_sock.h | 1 + include/net/inet_sock.h | 9 --------- net/ipv4/tcp_input.c | 4 +++- net/ipv4/tcp_ipv4.c | 13 ++++++++++--- net/ipv4/tcp_minisocks.c | 2 +- net/ipv6/tcp_ipv6.c | 27 +++++++++++++++++++++++++-- 7 files changed, 41 insertions(+), 16 deletions(-) diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 379e433e15e0..879db26ec401 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -369,6 +369,7 @@ struct ipv6_pinfo { __u8 rcv_tclass; __u32 dst_cookie; + __u32 rx_dst_cookie; struct ipv6_mc_socklist __rcu *ipv6_mc_list; struct ipv6_ac_socklist *ipv6_ac_list; diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 5ee66f517b4f..ba1d3615acbb 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -39,6 +39,7 @@ struct inet_connection_sock_af_ops { int (*queue_xmit)(struct sk_buff *skb, struct flowi *fl); void (*send_check)(struct sock *sk, struct sk_buff *skb); int (*rebuild_header)(struct sock *sk); + void (*sk_rx_dst_set)(struct sock *sk, const struct sk_buff *skb); int (*conn_request)(struct sock *sk, struct sk_buff *skb); struct sock *(*syn_recv_sock)(struct sock *sk, struct sk_buff *skb, struct request_sock *req, diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index 83b567fe1941..613cfa401672 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -249,13 +249,4 @@ static inline __u8 inet_sk_flowi_flags(const struct sock *sk) return flags; } -static inline void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - - dst_hold(dst); - sk->sk_rx_dst = dst; - inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; -} - #endif /* _INET_SOCK_H */ diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2fd2bc9e3c64..85308b90df80 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5392,6 +5392,8 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb, { struct tcp_sock *tp = tcp_sk(sk); + if (unlikely(sk->sk_rx_dst == NULL)) + inet_csk(sk)->icsk_af_ops->sk_rx_dst_set(sk, skb); /* * Header prediction. * The code loosely follows the one in the famous @@ -5605,7 +5607,7 @@ void tcp_finish_connect(struct sock *sk, struct sk_buff *skb) tcp_set_state(sk, TCP_ESTABLISHED); if (skb != NULL) { - inet_sk_rx_dst_set(sk, skb); + icsk->icsk_af_ops->sk_rx_dst_set(sk, skb); security_inet_conn_established(sk, skb); } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 42b2a6a73092..272241f16fcb 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1627,9 +1627,6 @@ int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb) sk->sk_rx_dst = NULL; } } - if (unlikely(sk->sk_rx_dst == NULL)) - inet_sk_rx_dst_set(sk, skb); - if (tcp_rcv_established(sk, skb, tcp_hdr(skb), skb->len)) { rsk = sk; goto reset; @@ -1872,10 +1869,20 @@ static struct timewait_sock_ops tcp_timewait_sock_ops = { .twsk_destructor= tcp_twsk_destructor, }; +static void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + + dst_hold(dst); + sk->sk_rx_dst = dst; + inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; +} + const struct inet_connection_sock_af_ops ipv4_specific = { .queue_xmit = ip_queue_xmit, .send_check = tcp_v4_send_check, .rebuild_header = inet_sk_rebuild_header, + .sk_rx_dst_set = inet_sk_rx_dst_set, .conn_request = tcp_v4_conn_request, .syn_recv_sock = tcp_v4_syn_recv_sock, .net_header_len = sizeof(struct iphdr), diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 232a90c3ec86..d9c9dcef2de3 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -387,7 +387,7 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, struct tcp_sock *oldtp = tcp_sk(sk); struct tcp_cookie_values *oldcvp = oldtp->cookie_values; - inet_sk_rx_dst_set(newsk, skb); + newicsk->icsk_af_ops->sk_rx_dst_set(newsk, skb); /* TCP Cookie Transactions require space for the cookie pair, * as it differs for each connection. There is no need to diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index c66b90f71c9b..5a439e9a4c01 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1447,7 +1447,17 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb) opt_skb = skb_clone(skb, sk_gfp_atomic(sk, GFP_ATOMIC)); if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */ + struct dst_entry *dst = sk->sk_rx_dst; + sock_rps_save_rxhash(sk, skb); + if (dst) { + if (inet_sk(sk)->rx_dst_ifindex != skb->skb_iif || + dst->ops->check(dst, np->rx_dst_cookie) == NULL) { + dst_release(dst); + sk->sk_rx_dst = NULL; + } + } + if (tcp_rcv_established(sk, skb, tcp_hdr(skb), skb->len)) goto reset; if (opt_skb) @@ -1705,9 +1715,9 @@ static void tcp_v6_early_demux(struct sk_buff *skb) struct dst_entry *dst = sk->sk_rx_dst; struct inet_sock *icsk = inet_sk(sk); if (dst) - dst = dst_check(dst, 0); + dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie); if (dst && - icsk->rx_dst_ifindex == inet6_iif(skb)) + icsk->rx_dst_ifindex == skb->skb_iif) skb_dst_set_noref(skb, dst); } } @@ -1719,10 +1729,23 @@ static struct timewait_sock_ops tcp6_timewait_sock_ops = { .twsk_destructor= tcp_twsk_destructor, }; +static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + const struct rt6_info *rt = (const struct rt6_info *)dst; + + dst_hold(dst); + sk->sk_rx_dst = dst; + inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; + if (rt->rt6i_node) + inet6_sk(sk)->rx_dst_cookie = rt->rt6i_node->fn_sernum; +} + static const struct inet_connection_sock_af_ops ipv6_specific = { .queue_xmit = inet6_csk_xmit, .send_check = tcp_v6_send_check, .rebuild_header = inet6_sk_rebuild_header, + .sk_rx_dst_set = inet6_sk_rx_dst_set, .conn_request = tcp_v6_conn_request, .syn_recv_sock = tcp_v6_syn_recv_sock, .net_header_len = sizeof(struct ipv6hdr), From c31cc1b764b6efb713601d351c1a879c042eab34 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Mon, 6 Aug 2012 23:22:15 +0300 Subject: [PATCH 0250/1098] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846" 1) The above commit introduced a common ->get_pendown_state() function into the generic code, but that function was board-specific for the OMAP3EVM and thus broke most other boards using this code. 2) The above commit was mis-merged introducing another bug which prevents the ads7846 driver probe function to succeed. The omap_ads7846_init() function frees the pendown GPIO in case there is no ->get_pendown_state() function set by the caller (board specific code), so it can be requested later by the ads7846 driver. The above commit add a common ->get_pendown_state() function without removing the gpio_free() call and thus once the ads7846 driver tries to use the pendown GPIO, it crashes as the pendown GPIO has not been requested. 3) The above commit introduces NO new functionality as get_pendown_state() function is already implemented in a suitable way by the ads7846 driver and the debounce time handling has already been fixed by commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code). This reverts commit 16aced80f6739beb2a6ff7b6f96c83ba80d331e8. Conflicts: arch/arm/mach-omap2/common-board-devices.c Solved by taking the working version prior to the above commit. Cc: Zumeng Chen Cc: Arnd Bergmann Signed-off-by: Igor Grinberg Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/common-board-devices.c | 11 ----------- arch/arm/mach-omap2/common-board-devices.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5eb..0d362e9f9cb9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457c..c1875862679f 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166b..a0b4a42836ab 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; From c8415a48fcb7a29889f4405d38c57db351e4b50a Mon Sep 17 00:00:00 2001 From: Felix Kaechele Date: Mon, 6 Aug 2012 23:02:01 +0200 Subject: [PATCH 0251/1098] ALSA: hda - add dock support for Thinkpad X230 As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to correctly set up the pins for the dock port. Signed-off-by: Felix Kaechele Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bb93f927f7be..daa5103eb936 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6207,6 +6207,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE), From f6b0ca25ee402f714487b31c35f8e11f2bf4310b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 5 Aug 2012 14:01:25 +0800 Subject: [PATCH 0252/1098] gpio/mxc: remove redundant shadow variables initialization With commit 3e11f7b (gpio/generic: initialize basic_mmio_gpio shadow variables properly) in place, the shadow variables initialization is being done in generic driver bgpio_init call. Remove the redundant shadow variables initialization from gpio-mxc driver. Signed-off-by: Shawn Guo Tested-by: Dirk Behme Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mxc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 4db460b6ecf7..76e8cda9c06f 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -466,8 +466,6 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) port->bgc.gc.to_irq = mxc_gpio_to_irq; port->bgc.gc.base = pdev->id * 32; - port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir); - port->bgc.data = port->bgc.read_reg(port->bgc.reg_set); err = gpiochip_add(&port->bgc.gc); if (err) From 7e6086d9e54a159a6257c02bb7fc5805c614aad2 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 5 Aug 2012 14:01:26 +0800 Subject: [PATCH 0253/1098] gpio/mxc: specify gpio base for device tree probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, unlike the non-DT probe where the gpio base is specified with pdev->id, the DT probe uses the base dynamically allocated by gpio core, which uses a completely different numbering scheme. This causes two issues to user space applications which access sysfs entry /sys/class/gpio/gpioN. * It breaks the compatibility with user space applications between non-DT and DT kernels. * It's not intuitive and sometimes hard for users to map the Linux gpio number to the actual hardware pin. Use alias to identify the gpio port/bank, and then the gpio base can be specified with port id to solve above issues. If alias is not defined in device tree, the base number dynamically allocated by gpio core will be used. Signed-off-by: Shawn Guo Tested-by: Uwe Kleine-König Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mxc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 76e8cda9c06f..80f44bb64a87 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -465,7 +465,8 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) goto out_iounmap; port->bgc.gc.to_irq = mxc_gpio_to_irq; - port->bgc.gc.base = pdev->id * 32; + port->bgc.gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 : + pdev->id * 32; err = gpiochip_add(&port->bgc.gc); if (err) From 5230f8fe9ad870ac24f23bca496347b87185c7c5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 5 Aug 2012 14:01:28 +0800 Subject: [PATCH 0254/1098] ARM: dts: imx: add alias for gpio Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo Signed-off-by: Linus Walleij --- arch/arm/boot/dts/imx27.dtsi | 6 ++++++ arch/arm/boot/dts/imx51.dtsi | 4 ++++ arch/arm/boot/dts/imx53.dtsi | 7 +++++++ arch/arm/boot/dts/imx6q.dtsi | 7 +++++++ 4 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5ab..5303ab680a34 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f90..aba28dc87fc8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e6..cd37165edce5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e6..fd57079f71a9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { From f7093f3e7a50bfeeceb8950f9130cbf8af74bf92 Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Fri, 20 Jul 2012 13:58:59 -0700 Subject: [PATCH 0255/1098] gpio: samsung: Fix off-by-one bug in gpio addresses Move gpc4 to the end of the automatically processed gpio controllers so we don't taint the automatic offset calculation. This bug caused all controllers coming after gpc4 to map to the incorrect address. The result is <&gpd1 0 0 0 0> would actually map to GPIO 0 in gpd0. Signed-off-by: Sean Paul Reviewed-by: Thomas Abraham Acked-by: Doug Anderson Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/gpio/gpio-samsung.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 92f7b2bb79d4..ba126cc04073 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2452,12 +2452,6 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { .ngpio = EXYNOS5_GPIO_C3_NR, .label = "GPC3", }, - }, { - .chip = { - .base = EXYNOS5_GPC4(0), - .ngpio = EXYNOS5_GPIO_C4_NR, - .label = "GPC4", - }, }, { .chip = { .base = EXYNOS5_GPD0(0), @@ -2512,6 +2506,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { .ngpio = EXYNOS5_GPIO_Y6_NR, .label = "GPY6", }, + }, { + .chip = { + .base = EXYNOS5_GPC4(0), + .ngpio = EXYNOS5_GPIO_C4_NR, + .label = "GPC4", + }, }, { .config = &samsung_gpio_cfgs[9], .irq_base = IRQ_EINT(0), @@ -2836,7 +2836,7 @@ static __init void exynos5_gpiolib_init(void) } /* need to set base address for gpc4 */ - exynos5_gpios_1[11].base = gpio_base1 + 0x2E0; + exynos5_gpios_1[20].base = gpio_base1 + 0x2E0; /* need to set base address for gpx */ chip = &exynos5_gpios_1[21]; From d6a2b7ba67334a7e72cd153c142c449831557cb9 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 5 Aug 2012 11:52:34 +0200 Subject: [PATCH 0256/1098] drivers/gpio/gpio-langwell.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Linus Walleij --- drivers/gpio/gpio-langwell.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c index a1c8754f52cf..202a99207b7d 100644 --- a/drivers/gpio/gpio-langwell.c +++ b/drivers/gpio/gpio-langwell.c @@ -339,7 +339,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, resource_size_t start, len; struct lnw_gpio *lnw; u32 gpio_base; - int retval = 0; + int retval; int ngpio = id->driver_data; retval = pci_enable_device(pdev); @@ -357,6 +357,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, base = ioremap_nocache(start, len); if (!base) { dev_err(&pdev->dev, "error mapping bar1\n"); + retval = -EFAULT; goto err3; } gpio_base = *((u32 *)base + 1); @@ -381,8 +382,10 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio, &lnw_gpio_irq_ops, lnw); - if (!lnw->domain) + if (!lnw->domain) { + retval = -ENOMEM; goto err3; + } lnw->reg_base = base; lnw->chip.label = dev_name(&pdev->dev); From a71eb61c9d077ec5019b35da6c883d67fc43d002 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 10 Jul 2012 03:57:32 +0200 Subject: [PATCH 0257/1098] ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts as an IRQ line, it has to be configured as an input GPIO. IGEPv2 platform code sets the smsc911x_cfg->gpio_irq to GPIO 176 but since the mux pin default mode is MODE7 (safe_mode) the driver fails when trying to register the IRQ with the following error message: [ 1.994598] smsc911x: Driver version 2008-10-21 [ 3.704162] irq 272: nobody cared (try booting with the "irqpoll" option) [ 3.711364] [] (unwind_backtrace+0x0/0xf0) from [] (__report_bad_irq+0x20/0xbc) [ 3.720916] [] (__report_bad_irq+0x20/0xbc) from [] (note_interrupt+0x1d8/0x238) [ 3.730560] [] (note_interrupt+0x1d8/0x238) from [] (handle_irq_event_percpu+0xc0/0x260) [ 3.740936] [] (handle_irq_event_percpu+0xc0/0x260) from [] (handle_irq_event+0x3c/0x5c) [ 3.751312] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xac/0x10c) [ 3.761047] [] (handle_level_irq+0xac/0x10c) from [] (generic_handle_irq+0x30/0x48) [ 3.770935] [] (generic_handle_irq+0x30/0x48) from [] (gpio_irq_handler+0x180/0x1d4) [ 3.780944] [] (gpio_irq_handler+0x180/0x1d4) from [] (generic_handle_irq+0x30/0x48) [ 3.790954] [] (generic_handle_irq+0x30/0x48) from [] (handle_IRQ+0x4c/0xac) [ 3.800231] [] (handle_IRQ+0x4c/0xac) from [] (omap3_intc_handle_irq+0x60/0x74) [ 3.809783] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x60) [ 3.819213] Exception stack(0xee42fde0 to 0xee42fe28) [ 3.824554] fde0: 00000001 00000001 00000000 00000000 60000013 c06cce14 c06cce14 00000110 [ 3.833190] fe00: 00000000 c06ccdf4 60000013 ee41d000 fb058064 ee42fe28 c0089e08 c04976b4 [ 3.841796] fe20: 20000013 ffffffff [ 3.845489] [] (__irq_svc+0x44/0x60) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.855499] [] (_raw_spin_unlock_irqrestore+0x34/0x44) from [] (__setup_irq+0x1b8/0x3f0) [ 3.865875] [] (__setup_irq+0x1b8/0x3f0) from [] (request_threaded_irq+0xb8/0x140) [ 3.875701] [] (request_threaded_irq+0xb8/0x140) from [] (smsc911x_drv_probe+0x75c/0x11a4) [ 3.886260] [] (smsc911x_drv_probe+0x75c/0x11a4) from [] (platform_drv_probe+0x18/0x1c) [ 3.906707] [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [ 3.916625] [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [ 3.926177] [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x248) [ 3.935821] [] (bus_add_driver+0x184/0x248) from [] (driver_register+0x78/0x12c) [ 3.945465] [] (driver_register+0x78/0x12c) from [] (do_one_initcall+0x34/0x178) [ 3.955108] [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xfc/0x1c0) [ 3.964385] [] (kernel_init+0xfc/0x1c0) from [] (kernel_thread_exit+0x0/0x8) [ 3.973632] handlers: [ 3.976043] [] smsc911x_irqhandler [ 3.980560] Disabling IRQ #272 Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra Tested-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482e..28214483aaba 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif From 5f789ebcbc06ff02a53d54f1602e36c9da30dd4c Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Wed, 4 Jul 2012 18:00:37 +0530 Subject: [PATCH 0258/1098] arm/dts: Fix am33xx wdt node Add am33xx wdt node. Signed-off-by: Afzal Mohammed [tony@atomide.com: I messed up and produced an empty commit db27ac80 with stg apply] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5..bd0cff3f808c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; From 9de76b6df70003b657d907571b17ac3c17cd9082 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Thu, 26 Jul 2012 13:20:34 +0200 Subject: [PATCH 0259/1098] i.MX27: Fix emma-prp and csi clocks. Naming of emma-prp related clocks for the i.MX27 is not correct. Signed-off-by: Javier Martin Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/clk-imx27.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb167..f69ca4680049 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); From acb11fe80a27f4b30fd38be6e6e35a0abc395401 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 13 Jul 2012 16:15:07 +0530 Subject: [PATCH 0260/1098] OMAP2+: Fix random config build break with !ARM_CPU_SUSPEND The random config builds with PM and !ARM_CPU_SUSPEND breaks with below error on omap2plus_defconfig. arch/arm/mach-omap2/sleep44xx.S:323: undefined reference to `cpu_resume' arch/arm/mach-omap2/omap-mpuss-lowpower.c:278: undefined reference to `cpu_suspend' This is because recently merged OMAP5 platform shares the common files with OMAP4 but doesn't select ARM_CPU_SUSPEND. Without the ARM_CPU_SUSPEND the sleep code is meaningless. Fix the same by adding ARM_CPU_SUSPEND for OMAP5. The suggestion came from Russell King in an off-list discussion. Cc: Russell King Cc: Kevin Hilman Reported-by: Tony Lindgren Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..4a4d058ed146 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -69,6 +69,7 @@ config SOC_OMAP5 select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 From b7ec70be01a87f2c85df3ae11046e74f9b67e323 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Tue, 31 Jul 2012 02:02:43 +0000 Subject: [PATCH 0261/1098] e1000e: NIC goes up and immediately goes down Found that commit d478eb44 was a bad commit. If the link partner is transmitting codeword (even if NULL codeword), then the RXCW.C bit will be set so check for RXCW.CW is unnecessary. Ref: RH BZ 840642 Reported-by: Fabio Futigami Signed-off-by: Tushar Dave CC: Marcelo Ricardo Leitner CC: stable [2.6.38+] Tested-by: Aaron Brown Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/e1000e/82571.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 0b3bade957fd..2a4ded2fd6e5 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1601,10 +1601,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) * auto-negotiation in the TXCW register and disable * forced link in the Device Control register in an * attempt to auto-negotiate with our link partner. - * If the partner code word is null, stop forcing - * and restart auto negotiation. */ - if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) { + if (rxcw & E1000_RXCW_C) { /* Enable autoneg, and unforce link up */ ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); From eca90f550494171f54f8a700caee65ec16455a5b Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Wed, 1 Aug 2012 02:11:15 +0000 Subject: [PATCH 0262/1098] e1000e: 82571 Tx Data Corruption during Tx hang recovery A bus trace shows that while executing e1000e_down, TCTL is cleared except for the PSP bit. This occurs while in the middle of fetching a TSO packet since the Tx packet buffer is full at that point. Before the device is reset, the e1000_watchdog_task starts to run from the middle (it was apparently pre-empted earlier, although that is not in the trace) and sets TCTL.EN. At that point, 82571 transmits the corrupted packet, apparently because TCTL.MULR was cleared in the middle of fetching a packet, which is forbidden. Driver should just clear TCTL.EN in e1000_reset_hw_82571 instead of clearing the entire register, so as not to change any settings in the middle of fetching a packet. Signed-off-by: Tushar Dave Tested-by: Aaron Brown Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/e1000e/82571.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 2a4ded2fd6e5..080c89093feb 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -999,7 +999,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) **/ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) { - u32 ctrl, ctrl_ext, eecd; + u32 ctrl, ctrl_ext, eecd, tctl; s32 ret_val; /* @@ -1014,7 +1014,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ew32(IMC, 0xffffffff); ew32(RCTL, 0); - ew32(TCTL, E1000_TCTL_PSP); + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_EN; + ew32(TCTL, tctl); e1e_flush(); usleep_range(10000, 20000); From 119b0e0351bcdb7833f368781e6241ff283b49e5 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Tue, 7 Aug 2012 00:45:57 -0700 Subject: [PATCH 0263/1098] igb: add delay to allow igb loopback test to succeed on 8086:10c9 Some 8086:10c9 NICs have a problem completing the ethtool loopback test. The result looks like this: ethtool -t eth1 The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 13 Link test (on/offline) 0 A bisect clearly points to commit a95a07445ee97a2fef65befafbadcc30ca1bd145. However that seems to only trigger the bug. While adding some printk the problem disappeared, so this might be a timing issue. After some trial and error I discovered that adding a small delay just before igb_write_phy_reg() in igb_integrated_phy_loopback() allows the loopback test to succeed. I was unable to figure out the root cause so far but I expect it to be somewhere in the following executing path igb_integrated_phy_loopback ->igb_write_phy_reg_igp ->igb_write_phy_reg_mdic ->igb_acquire_phy_82575 ->igb_acquire_swfw_sync_82575 The problem could only be observed on 8086:10c9 NICs so far and not all of them show the behaviour. I did not restrict the workaround to this type of NIC as it should do no harm to other igb NICs. With the patch below the loopback test succeeded 500 times in a row using a NIC that would otherwise fail. Signed-off-by: Stefan Assmann Tested-by: Aaron Brown Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 90550f5e3dd9..70591117051b 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1498,6 +1498,9 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter) break; } + /* add small delay to avoid loopback test failure */ + msleep(50); + /* force 1000, set loopback */ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140); From 035534ed3377d9def2c17717899fd64a111a785b Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Mon, 6 Aug 2012 18:02:29 +0200 Subject: [PATCH 0264/1098] canfd: remove redundant CAN FD flag The first idea of the CAN FD implementation started with a new struct canfd_frame to be used for both CAN FD frames and legacy CAN frames. The now mainlined implementation supports both CAN frame types simultaneously and distinguishes them only by their required sizes: CAN_MTU and CANFD_MTU. Only the struct canfd_frame contains a flags element which is needed for the additional CAN FD information. As CAN FD implicitly means that the 'Extened Data Length' mode is enabled the formerly defined CANFD_EDL bit became redundant and also confusing as an unset bit would be an error and would always need to be tested. This patch removes the obsolete CANFD_EDL bit and clarifies the documentation for the use of struct canfd_frame and the CAN FD relevant flags. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can.h | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/include/linux/can.h b/include/linux/can.h index 018055efc034..e52958d7c2d1 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -74,20 +74,21 @@ struct can_frame { /* * defined bits for canfd_frame.flags * - * As the default for CAN FD should be to support the high data rate in the - * payload section of the frame (HDR) and to support up to 64 byte in the - * data section (EDL) the bits are only set in the non-default case. - * Btw. as long as there's no real implementation for CAN FD network driver - * these bits are only preliminary. + * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to + * be set in the CAN frame bitstream on the wire. The EDL bit switch turns + * the CAN controllers bitstream processor into the CAN FD mode which creates + * two new options within the CAN FD frame specification: * - * RX: NOHDR/NOEDL - info about received CAN FD frame - * ESI - bit from originating CAN controller - * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller - * ESI - bit is set by local CAN controller + * Bit Rate Switch - to indicate a second bitrate is/was used for the payload + * Error State Indicator - represents the error state of the transmitting node + * + * As the CANFD_ESI bit is internally generated by the transmitting CAN + * controller only the CANFD_BRS bit is relevant for real CAN controllers when + * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make + * sense for virtual CAN interfaces to test applications with echoed frames. */ -#define CANFD_NOHDR 0x01 /* frame without high data rate */ -#define CANFD_NOEDL 0x02 /* frame without extended data length */ -#define CANFD_ESI 0x04 /* error state indicator */ +#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */ +#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */ /** * struct canfd_frame - CAN flexible data rate frame structure From 3b6c9440873d97728998854feb3bc5ffb827dd99 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sun, 5 Aug 2012 16:45:32 +0200 Subject: [PATCH 0265/1098] ARM: kirkwood: fix typo in Makefile.boot Just a small typo fix to make lsxl dtbs compile Signed-off-by: Sebastian Hesselbarth Cc: Jason Cooper Cc: Andrew Lunn Cc: Russell King Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/mach-kirkwood/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409b..a5717558ee89 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb From ae377aaf98630de03e58fffdf3f35dec3d0ca5e0 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 30 Jul 2012 18:42:19 +0530 Subject: [PATCH 0266/1098] arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi for twl6030 to reflect this. commit '86f5fc' regulator: core: Mark all DT based boards as having full constraints) caused these to be disabled at late boot causing OMAP4 boards (using twl6030) to lockup. Reported-by: Kishon Vijay Abraham I Reported-by: J Keerthy Signed-off-by: Rajendra nayak Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl6030.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7eb..d351b27d7213 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { From 128aa925ee7e9aa84943ce64df48192b92a81767 Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Sat, 14 Jul 2012 22:49:54 +0200 Subject: [PATCH 0267/1098] OMAP: remove unused parameter arch_id from uncompress.h There is not point in having arch_id as parameter of __arch_decomp_setup(), nothing in it uses arch_id. The machine id is already exported (and used) with symbol __machine_arch_type as per mach-types.h. Removing the pointless macro as well. Signed-off-by: Domenico Andreoli Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/uncompress.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a136781..7f7b112acccb 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ From 36b547aa20d1cf0d62bace7b8a9928aa33de36cd Mon Sep 17 00:00:00 2001 From: Michael Jones Date: Thu, 26 Jul 2012 17:44:44 +0200 Subject: [PATCH 0268/1098] omap2: mux: remove comment for nonexistent member remove comment for nonexistent member Signed-off-by: Michael Jones Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a16..76f9b3c2f586 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; From da612d880fbc598ac0efcef579355fb90d4bca4e Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Mon, 6 Aug 2012 18:45:01 -0300 Subject: [PATCH 0269/1098] drm/i915: add more Haswell PCI IDs Also properly indent the HB IDs. Reviewed-by: Rodrigo Vivi Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/char/agp/intel-agp.h | 39 ++++++++++++++++++--- drivers/char/agp/intel-gtt.c | 60 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_drv.c | 31 ++++++++++++++++- 3 files changed, 123 insertions(+), 7 deletions(-) diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 57226424690c..6f007b6c240d 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -239,16 +239,45 @@ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG 0x016A #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB 0x0F00 /* VLV1 */ #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG 0x0F30 -#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */ +#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */ #define PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG 0x0402 #define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG 0x0412 -#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */ +#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG 0x0422 +#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */ #define PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG 0x0406 #define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG 0x0416 -#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */ +#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG 0x0426 +#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */ #define PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG 0x040a #define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG 0x041a -#define PCI_DEVICE_ID_INTEL_HASWELL_SDV 0x0c16 /* SDV */ -#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04 +#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG 0x042a +#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG 0x0C02 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG 0x0C12 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG 0x0C22 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG 0x0C06 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG 0x0C16 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG 0x0C26 +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG 0x0C0A +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG 0x0C1A +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG 0x0C2A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG 0x0A02 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG 0x0A12 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG 0x0A22 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG 0x0A06 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG 0x0A16 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG 0x0A26 +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG 0x0A0A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG 0x0A1A +#define PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG 0x0A2A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG 0x0D12 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG 0x0D22 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG 0x0D32 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG 0x0D16 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG 0x0D26 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG 0x0D36 +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG 0x0D1A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG 0x0D2A +#define PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG 0x0D3A #endif diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9ed92ef5829b..08fc5cbb13cd 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1502,15 +1502,73 @@ static const struct intel_gtt_driver_description { "Haswell", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG, "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG, "Haswell", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG, "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG, "Haswell", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG, "Haswell", &sandybridge_gtt_driver }, - { PCI_DEVICE_ID_INTEL_HASWELL_SDV, + { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG, "Haswell", &sandybridge_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index ed22612bc847..a24ffbe97c01 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -346,11 +346,40 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ - INTEL_VGA_DEVICE(0x0c16, &intel_haswell_d_info), /* SDV */ + INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ + INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ + INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ + INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ + INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ + INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ + INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT1 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D32, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT1 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D3A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT1 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D36, &intel_haswell_m_info), /* CRW GT2 mobile */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0157, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0155, &intel_valleyview_d_info), From 606b64ea666dc45675c5ecce6f73022355172d78 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 31 Jul 2012 14:57:38 +0200 Subject: [PATCH 0270/1098] pinctrl/nomadik: fix hsi function group list Tidy up a small typo in the HSI function group list. Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik-db8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c index 6f99769c6733..5f3e9d0221e1 100644 --- a/drivers/pinctrl/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -766,7 +766,7 @@ DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1", DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1"); DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1"); DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1"); -DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1", "hsit_a_2"); +DB8500_FUNC_GROUPS(hsi, "hsir_a_1", "hsit_a_1", "hsit_a_2"); DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1"); DB8500_FUNC_GROUPS(usb, "usb_a_1"); DB8500_FUNC_GROUPS(trig, "trig_b_1"); From e9fc83cb2e5877801a255a37ddbc5be996ea8046 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 7 Aug 2012 14:03:29 +0200 Subject: [PATCH 0271/1098] ALSA: hda - remove quirk for Dell Vostro 1015 This computer is confirmed working with model=auto on kernel 3.2. Also, parsing fails with hda-emu with the current model. Cc: stable@kernel.org (3.2+) Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 14361184ae1e..6f538eb3871e 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2972,7 +2972,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x0401, "Dell Vostro 1014", CXT5066_DELL_VOSTRO), - SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x050f, "Dell Inspiron", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x0510, "Dell Vostro", CXT5066_IDEAPAD), From bb10b09a8ea10228ef3e56365fae40f1e24e5589 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 7 Aug 2012 14:03:30 +0200 Subject: [PATCH 0272/1098] ALSA: hda - remove redundant auto quirks for conexant 506x Now that the auto model is the default, these quirks are redundant and can be removed. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6f538eb3871e..5e22a8f43d2e 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2967,7 +2967,6 @@ static const char * const cxt5066_models[CXT5066_MODELS] = { }; static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { - SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT5066_AUTO), SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD), @@ -2987,14 +2986,10 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS), - SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T510", CXT5066_AUTO), - SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520 & W520", CXT5066_AUTO), SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS), - SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO), - SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO), {} }; From f4b49dee1ac0ae0660ef697fdab789dc92f59c6f Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Sun, 29 Jul 2012 13:56:38 +0545 Subject: [PATCH 0273/1098] pinctrl-sirf: remove devm_kfree at error path the pointers that are allocated with devm_kzalloc will be automatically freed, at unload time. Signed-off-by: Devendra Naga Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-sirf.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 2aae8a8978e9..7fca6ce5952b 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1217,7 +1217,6 @@ out_no_rsc_remap: iounmap(spmx->gpio_virtbase); out_no_gpio_remap: platform_set_drvdata(pdev, NULL); - devm_kfree(&pdev->dev, spmx); return ret; } From 8e406fe4aebee50b18176947a68aab6f519843de Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 30 Jul 2012 18:38:34 +0200 Subject: [PATCH 0274/1098] MAINTAINERS: fix a few pinctrl related entries MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Walleij --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e94..63ce3a38b332 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5329,14 +5329,15 @@ PIN CONTROL SUBSYSTEM M: Linus Walleij S: Maintained F: drivers/pinctrl/ +F: include/linux/pinctrl/ PIN CONTROLLER - ST SPEAR -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained -F: driver/pinctrl/spear/ +F: drivers/pinctrl/spear/ PKTCDVD DRIVER M: Peter Osterlund From 75c353ecacf54dbcca5e2e4388088893aac0fc34 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 18:50:47 +0200 Subject: [PATCH 0275/1098] drivers/pinctrl/pinctrl-nomadik.c: drop devm_kfree of devm_kzalloc'd data devm_kfree should not have to be explicitly used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,d; @@ x = devm_kzalloc(...) ... ?-devm_kfree(d,x); // Signed-off-by: Julia Lawall Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 53b0d49a7a1c..ec6ac501b23a 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1731,7 +1731,6 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev) for (i = 0; i < npct->soc->gpio_num_ranges; i++) { if (!nmk_gpio_chips[i]) { dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i); - devm_kfree(&pdev->dev, npct); return -EPROBE_DEFER; } npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip; From d0db84e713eaaccea2a435e1625fb3150b335f4a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 7 Aug 2012 15:37:47 +0300 Subject: [PATCH 0276/1098] ASoC: omap-mcbsp: Fix 6pin mux configuration The check for the mux_signal callback was wrong which prevents us to configure the 6pin port's FSR/CLKR signal mux. Reported-by: CF Adad Signed-off-by: Peter Ujfalusi Acked-by: Jarkko Nikula Signed-off-by: Mark Brown Cc: stable@vger.kernel.org (3.4+) --- sound/soc/omap/mcbsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index 34835e8a9160..d33c48baaf71 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -745,7 +745,7 @@ int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux) { const char *signal, *src; - if (mcbsp->pdata->mux_signal) + if (!mcbsp->pdata->mux_signal) return -EINVAL; switch (mux) { From 709aea6b05f8f6c852c293fb5d47a6461373b4dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 7 Aug 2012 18:09:23 +0200 Subject: [PATCH 0277/1098] ALSA: hda - Fix ugly debug prints with CONFIG_SND_VERBOSE_PRINTK=y When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in hda_auto_parser.c looks really ugly like: ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0 ALSA sound/pci/hda/hda_auto_parser.c:334 dig-out=0x12/0x0 ALSA sound/pci/hda/hda_auto_parser.c:335 inputs: ALSA sound/pci/hda/hda_auto_parser.c:339 Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339 Line=0x10 ALSA sound/pci/hda/hda_auto_parser.c:341 ALSA sound/pci/hda/hda_auto_parser.c:343 dig-in=0x13 Better to put one item at each line. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_auto_parser.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c index 647218d69f68..4f7d2dfcef7b 100644 --- a/sound/pci/hda/hda_auto_parser.c +++ b/sound/pci/hda/hda_auto_parser.c @@ -332,13 +332,12 @@ int snd_hda_parse_pin_defcfg(struct hda_codec *codec, if (cfg->dig_outs) snd_printd(" dig-out=0x%x/0x%x\n", cfg->dig_out_pins[0], cfg->dig_out_pins[1]); - snd_printd(" inputs:"); + snd_printd(" inputs:\n"); for (i = 0; i < cfg->num_inputs; i++) { - snd_printd(" %s=0x%x", + snd_printd(" %s=0x%x\n", hda_get_autocfg_input_label(codec, cfg, i), cfg->inputs[i].pin); } - snd_printd("\n"); if (cfg->dig_in_pin) snd_printd(" dig-in=0x%x\n", cfg->dig_in_pin); From a5f8ae2154eeb7ed18c6e3dbf6ac095ea4c3d5cf Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:30:11 +0800 Subject: [PATCH 0278/1098] regulator: palmas: Fix calculating selector in palmas_map_voltage_ldo This patch fixes below issues when choosing selector: 1. Current code returns negative selector if min_uV < 900000 which is wrong. For example, it is possible to satisfy the request with selector = 1 if the requested min_uV is 850000. 2. Current code may select a voltage lower than requested min_uV. For example, if the requested min_uV is 945000, current code chooses selector = 1 which is lower than requested min_uV. DIV_ROUND_UP to avoid this case. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 17d19fbbc490..0fcf3550f65d 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -486,9 +486,12 @@ static int palmas_map_voltage_ldo(struct regulator_dev *rdev, { int ret, voltage; - ret = ((min_uV - 900000) / 50000) + 1; - if (ret < 0) - return ret; + if (min_uV == 0) + return 0; + + if (min_uV < 900000) + min_uV = 900000; + ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1; /* Map back into a voltage to verify we're still in bounds */ voltage = palmas_list_voltage_ldo(rdev, ret); From 12565b166dab7966c2991c1561f3c22e9dad5535 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:31:03 +0800 Subject: [PATCH 0279/1098] regulator: palmas: Fix regmap offsets for PALMAS_REG_SMPS10 vsel_reg Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 0fcf3550f65d..9e3e7f3c4086 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -679,7 +679,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) case PALMAS_REG_SMPS10: pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES; pmic->desc[id].ops = &palmas_ops_smps10; - pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL; + pmic->desc[id].vsel_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_CTRL); pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, From 2735daeb161d3eb1ba041158c21ac2a0e42da6a2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:31:59 +0800 Subject: [PATCH 0280/1098] regulator: palmas: Call palmas_ldo_[read|write] in palmas_ldo_init Current code uses wrong calls palmas_smps_[read|write] in palmas_ldo_init(), should be palmas_ldo_[read|write] instead. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 9e3e7f3c4086..de68347cbc69 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -589,7 +589,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, addr = palmas_regs_info[id].ctrl_addr; - ret = palmas_smps_read(palmas, addr, ®); + ret = palmas_ldo_read(palmas, addr, ®); if (ret) return ret; @@ -599,7 +599,7 @@ static int palmas_ldo_init(struct palmas *palmas, int id, if (reg_init->mode_sleep) reg |= PALMAS_LDO1_CTRL_MODE_SLEEP; - ret = palmas_smps_write(palmas, addr, reg); + ret = palmas_ldo_write(palmas, addr, reg); if (ret) return ret; From 1c9d2d71a3cb0fcbfe91307b3c18d22f7d93f0cd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 Jul 2012 12:33:20 +0800 Subject: [PATCH 0281/1098] regulator: palmas: Fix palmas_probe error handling Fix below error handling cases: 1. If reading PALMAS_SMPS_CTRL fails, simply returns ret rather than goto err_unregister_regulator because we have not call regulator_register(). 2. If palmas_ldo_init() fails, we need to call regulator_unregister() for the regulator we just successfully registered in this for loop iteration. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index de68347cbc69..46c7e88f8381 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -633,7 +633,7 @@ static __devinit int palmas_probe(struct platform_device *pdev) ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®); if (ret) - goto err_unregister_regulator; + return ret; if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) pmic->smps123 = 1; @@ -783,8 +783,10 @@ static __devinit int palmas_probe(struct platform_device *pdev) reg_init = pdata->reg_init[id]; if (reg_init) { ret = palmas_ldo_init(palmas, id, reg_init); - if (ret) + if (ret) { + regulator_unregister(pmic->rdev[id]); goto err_unregister_regulator; + } } } } From 7f852e0584f67654060f7814149744a1b7250480 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 24 Jul 2012 13:48:00 +0530 Subject: [PATCH 0282/1098] regulator: tps6586x: correct vin pin for sm0/sm1/sm2 As per datasheet, the vin pin for the regulator is named as vin_sm0, vin_sm1, vin_sm2 for sm0, sm1 and sm2 respectively. Correcting the names in driver and documentation to match with datasheet. Signed-off-by: Laxman Dewangan Reported-by: Stephen Warren Acked-by: Stephen Warren Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/tps6586x.txt | 12 ++++++------ drivers/regulator/tps6586x-regulator.c | 8 +++++--- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db12..da80c2ae0915 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -9,9 +9,9 @@ Required properties: - regulators: list of regulators provided by this controller, must have property "regulator-compatible" to match their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc -- sm0-supply: The input supply for the SM0. -- sm1-supply: The input supply for the SM1. -- sm2-supply: The input supply for the SM2. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. - vinldo01-supply: The input supply for the LDO1 and LDO2 - vinldo23-supply: The input supply for the LDO2 and LDO3 - vinldo4-supply: The input supply for the LDO4 @@ -30,9 +30,9 @@ Example: #gpio-cells = <2>; gpio-controller; - sm0-supply = <&some_reg>; - sm1-supply = <&some_reg>; - sm2-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; vinldo01-supply = <...>; vinldo23-supply = <...>; vinldo4-supply = <...>; diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index e6da90ab5153..19241fc30050 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -240,14 +240,16 @@ static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), + TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), - TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), - TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), + TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1, + ENB, 1, VCC1, 2), + TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0, + ENB, 0, VCC1, 0), }; /* From 3e2a928472daa839e7be0d71c1d8320334ea76e1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 17 Jul 2012 00:10:42 +0800 Subject: [PATCH 0283/1098] regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel The mask used in anatop_get_voltage_sel does not match the mask used in anatop_set_voltage_sel. We need to do left shift anatop_reg->vol_bit_shift bits for the correct mask. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index e9c2085f9dfb..ce0fe72a428e 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -64,14 +64,15 @@ static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector) static int anatop_get_voltage_sel(struct regulator_dev *reg) { struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); - u32 val; + u32 val, mask; if (!anatop_reg->control_reg) return -ENOTSUPP; val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg); - val = (val & ((1 << anatop_reg->vol_bit_width) - 1)) >> + mask = ((1 << anatop_reg->vol_bit_width) - 1) << anatop_reg->vol_bit_shift; + val = (val & mask) >> anatop_reg->vol_bit_shift; return val - anatop_reg->min_bit_val; } From cfa9cfbc083c7fc882286dcfba59c7e5a1a15545 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Aug 2012 17:11:40 +0200 Subject: [PATCH 0284/1098] regulator: ab3100: add missing voltage table The conversion to voltage tables in commit a3beb74261f26142019847128b2441b0301797ac "regulator: ab3100: Use regulator_list_voltage_table()" missed to add the voltage table to the buck. Fix this and it works like a charm. Signed-off-by: Linus Walleij Acked-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/ab3100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 182b553059c9..c151fd5d8c97 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -486,6 +486,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { .id = AB3100_BUCK, .ops = ®ulator_ops_variable_sleepable, .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), + .volt_table = ldo_e_buck_typ_voltages, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_time = 1000, From 817fea2df3c24b22f6123dc0106eb063b7132883 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 7 Aug 2012 11:48:33 -0600 Subject: [PATCH 0285/1098] vfio: Include vfio.h in installed headers Signed-off-by: Alex Williamson --- include/linux/Kbuild | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index d9a754474878..fa217607c582 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -391,6 +391,7 @@ header-y += v4l2-dv-timings.h header-y += v4l2-mediabus.h header-y += v4l2-subdev.h header-y += veth.h +header-y += vfio.h header-y += vhost.h header-y += videodev2.h header-y += virtio_9p.h From 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 23 Jul 2012 16:06:08 -0700 Subject: [PATCH 0286/1098] xhci: Increase reset timeout for Renesas 720201 host. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Sarah Sharp Reported-by: Edwin Klein Mentink Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7648b2d4b268..5c3a3f75e4d5 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -166,7 +166,7 @@ int xhci_reset(struct xhci_hcd *xhci) xhci_writel(xhci, command, &xhci->op_regs->command); ret = handshake(xhci, &xhci->op_regs->command, - CMD_RESET, 0, 250 * 1000); + CMD_RESET, 0, 10 * 1000 * 1000); if (ret) return ret; @@ -175,7 +175,8 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, + STS_CNR, 0, 10 * 1000 * 1000); for (i = 0; i < 2; ++i) { xhci->bus_state[i].port_c_suspend = 0; From 5cb7df2b2d3afee7638b3ef23a5bcb89c6f07bd9 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 2 Jul 2012 13:36:23 -0700 Subject: [PATCH 0287/1098] xhci: Add Etron XHCI_TRUST_TX_LENGTH quirk. Gary reports that with recent kernels, he notices more xHCI driver warnings: xhci_hcd 0000:03:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? We think his Etron xHCI host controller may have the same buggy behavior as the Fresco Logic xHCI host. When a short transfer is received, the host will mark the transfer as successfully completed when it should be marking it with a short completion. Fix this by turning on the XHCI_TRUST_TX_LENGTH quirk when the Etron host is discovered. Note that Gary has revision 1, but if Etron fixes this bug in future revisions, the quirk will have no effect. This patch should be backported to kernels as old as 2.6.36, that contain a backported version of commit 1530bbc6272d9da1e39ef8e06190d42c13a02733 "xhci: Add new short TX quirk for Fresco Logic host." Signed-off-by: Sarah Sharp Reported-by: Gary E. Miller Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18b231b0c5d3..92eaff6097c0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -99,6 +99,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; From 8202ce2e2921941098aa72894ac5d7b486a9d273 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 25 Jul 2012 10:52:45 -0700 Subject: [PATCH 0288/1098] xhci: Rate-limit XHCI_TRUST_TX_LENGTH quirk warning. When we encounter an xHCI host that needs the XHCI_TRUST_TX_LENGTH quirk, the xHCI driver ends up spewing messages about the quirk into dmesg every time a short packet occurs. Change the xHCI driver to rate-limit such warnings. Signed-off-by: Sarah Sharp Reported-by: Matthew Hall Reported-by: Gary E. Miller --- drivers/usb/host/xhci-ring.c | 4 ++-- drivers/usb/host/xhci.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8275645889da..0c93f5dcea6f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2073,8 +2073,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (xhci->quirks & XHCI_TRUST_TX_LENGTH) trb_comp_code = COMP_SHORT_TX; else - xhci_warn(xhci, "WARN Successful completion on short TX: " - "needs XHCI_TRUST_TX_LENGTH quirk?\n"); + xhci_warn_ratelimited(xhci, + "WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 55c0785810c9..96f49dbb50ac 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1537,6 +1537,8 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) #define xhci_warn(xhci, fmt, args...) \ dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +#define xhci_warn_ratelimited(xhci, fmt, args...) \ + dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) /* TODO: copied from ehci.h - can be refactored? */ /* xHCI spec says all registers are little endian */ From 265a2bc84247c9b9e3bb4fe275f16ba99551a7e7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 16 Jul 2012 16:56:15 -0700 Subject: [PATCH 0289/1098] ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on 3430/n900, OMAP3530/Overo Fire, 3730/Overo FireSTORM, 3730/Beagle-xM. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/twl-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50..db5ff6642375 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; From e0e29fd74c3c8bd2ef83bbaa73d528d58a944610 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 7 Aug 2012 11:28:06 -0700 Subject: [PATCH 0290/1098] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain" This reverts commit 58f0829b7186150318c79515f0e0850c5e7a9c89. Converstion to per-pwrdm per/post transition calls was a bit premature. Only tracking MPU, PER & CORE in the idle path means we lose the accounting for all the other powerdomains which may also transition in idle. On OMAP3, due to autodeps, several powerdomains transition along with MPU (e.g. DSS, USBHOST), and the accounting for these was lost with this patch. Since the accounting includes the context loss counters, drivers for devices in those power domains would never notice context lost, so would likely hang after any off-mode transitions. This patch should be revisited when the upcoming clkdm/pwrmdm/voltdm use-counting seires is merged since then we can properly do accounting without relying on a call in the idle path. In addition, the original patch had another bug because the PER powerdomain accounting was not updated until after the GPIO resume hook is called. Since gpio_resume_after_idle() checks the context loss count (which is not yet updated) it would not properly restore context, leaving the GPIO banks in an undefined state. Cc: Jean Pihet Cc: Tero Kristo Cc: Rajendra Nayak Reported-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65dbd..05bd8f02723f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); - /* PER */ - if (per_next_state < PWRDM_POWER_ON) { - omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } + pwrdm_post_transition(NULL); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } + /* PER */ + if (per_next_state < PWRDM_POWER_ON) + omap2_gpio_resume_after_idle(); } static void omap3_pm_idle(void) From e1267371eacf2cbcf580e41f9e64a986cdaf5c1d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:11:33 +0900 Subject: [PATCH 0291/1098] ARM: S3C24XX: Add missing DMACH_DT_PROP Commit 2b90807549 (spi: s3c64xx: add device tree support) requires the DMACH_DT_PROP element in the dma_ch enum. It's not used on non-DT platforms but has to be present nevertheless. So mimic the dummy-add of DMACH_DT_PROP on s3c64xx for s3c24xx machines, to correct the build breakage for the s3c24xx variants using the s3c64xx-spi-driver. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/include/mach/dma.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b66037..ee99fd56c043 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, From b01858c7806e7e6f6121da2e51c9222fc4d21dc6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:12:05 +0900 Subject: [PATCH 0292/1098] ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the prototype of the s3c2410_dma_* functions to use the enum dma_ch instead of an generic unsigned int. In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten, the other functions there were changed correctly. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f75380..db98e7021f0d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); From c0401241c01705205ed6f2b88460df1133591f58 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 19:17:14 +0900 Subject: [PATCH 0293/1098] ARM: Samsung: Make uart_save static in pm.c file Fixes the following sparse warning: arch/arm/plat-samsung/pm.c:77:21: warning: symbol 'uart_save' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdbc..15070284343e 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { From 8258d3923c7d8f9a28c43612c3f91c7b9d61191b Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:31:43 -0700 Subject: [PATCH 0294/1098] staging: comedi: remove pci_is_enabled() tests As mentioned by Ian Abbott, the comedi pci drivers that try to locate an unused pci device with the pci_is_enabled() test might actually skip over a perfectly good unused device. This test is also not consistent with the other comedi pci drivers. Remove the test from all the comedi pci drivers. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/adv_pci1710.c | 3 --- drivers/staging/comedi/drivers/adv_pci1723.c | 2 -- drivers/staging/comedi/drivers/adv_pci_dio.c | 2 -- 3 files changed, 7 deletions(-) diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index 31986608eaf1..6b4d0d68e637 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -1349,9 +1349,6 @@ static struct pci_dev *pci1710_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; - if (strcmp(this_board->name, DRV_NAME) == 0) { for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (pcidev->device == boardtypes[i].device_id) { diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c index da5ee69d2c9d..dfde0f6328dd 100644 --- a/drivers/staging/comedi/drivers/adv_pci1723.c +++ b/drivers/staging/comedi/drivers/adv_pci1723.c @@ -301,8 +301,6 @@ static struct pci_dev *pci1723_find_pci_dev(struct comedi_device *dev, } if (pcidev->vendor != PCI_VENDOR_ID_ADVANTECH) continue; - if (pci_is_enabled(pcidev)) - continue; return pcidev; } dev_err(dev->class_dev, diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c index 97f06dc8e48d..2d4cb7f638b2 100644 --- a/drivers/staging/comedi/drivers/adv_pci_dio.c +++ b/drivers/staging/comedi/drivers/adv_pci_dio.c @@ -1064,8 +1064,6 @@ static struct pci_dev *pci_dio_find_pci_dev(struct comedi_device *dev, slot != PCI_SLOT(pcidev->devfn)) continue; } - if (pci_is_enabled(pcidev)) - continue; for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) { if (boardtypes[i].vendor_id != pcidev->vendor) continue; From 7e8401b23e7fd4f585b0fcb62d0895487d5f11d6 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:10 -0700 Subject: [PATCH 0295/1098] staging: comedi: daqboard2000: add back subsystem_device check As mentioned by Ian Abbott, this driver originally checked the pci_dev subsystem_device in order to make sure that the pci_dev was compatible with this driver. The cleanup of the "find pci device" code removed this check. Add it back. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/daqboard2000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index ef28385c1482..7236cbe87e2b 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -718,7 +718,8 @@ static struct pci_dev *daqboard2000_find_pci_dev(struct comedi_device *dev, continue; } if (pcidev->vendor != PCI_VENDOR_ID_IOTECH || - pcidev->device != 0x0409) + pcidev->device != 0x0409 || + pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) continue; for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { From 325a01f38d8e443b9a10a84606740cf570efddd1 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:29 -0700 Subject: [PATCH 0296/1098] staging: comedi: daqboard2000: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/daqboard2000.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index 7236cbe87e2b..cad559a1a730 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -740,6 +740,7 @@ static int daqboard2000_attach(struct comedi_device *dev, { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; void *aux_data; unsigned int aux_len; int result; @@ -759,11 +760,12 @@ static int daqboard2000_attach(struct comedi_device *dev, "failed to enable PCI device and request regions\n"); return -EIO; } - dev->iobase = pci_resource_start(pcidev, 2); + dev->iobase = 1; /* the "detach" needs this */ - devpriv->plx = - ioremap(pci_resource_start(pcidev, 0), DAQBOARD2000_PLX_SIZE); - devpriv->daq = ioremap(dev->iobase, DAQBOARD2000_DAQ_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->plx = ioremap(pci_base, DAQBOARD2000_PLX_SIZE); + pci_base = pci_resource_start(pcidev, 2); + devpriv->daq = ioremap(pci_base, DAQBOARD2000_DAQ_SIZE); if (!devpriv->plx || !devpriv->daq) return -ENOMEM; @@ -800,8 +802,6 @@ static int daqboard2000_attach(struct comedi_device *dev, printk("Interrupt after is: %x\n", interrupt); */ - dev->iobase = (unsigned long)devpriv->daq; - dev->board_name = this_board->name; s = dev->subdevices + 0; @@ -825,7 +825,7 @@ static int daqboard2000_attach(struct comedi_device *dev, s = dev->subdevices + 2; result = subdev_8255_init(dev, s, daqboard2000_8255_cb, - (unsigned long)(dev->iobase + 0x40)); + (unsigned long)(devpriv->daq + 0x40)); out: return result; From 2724f01856fafbe9f76d8e74a564b576b6f02d72 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:32:47 -0700 Subject: [PATCH 0297/1098] staging: comedi: dt3000: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt3000.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c index a6fe6c9be87e..3476cda0fff0 100644 --- a/drivers/staging/comedi/drivers/dt3000.c +++ b/drivers/staging/comedi/drivers/dt3000.c @@ -804,6 +804,7 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) { struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret = 0; dev_dbg(dev->class_dev, "dt3000:\n"); @@ -820,9 +821,10 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it) ret = comedi_pci_enable(pcidev, "dt3000"); if (ret < 0) return ret; + dev->iobase = 1; /* the "detach" needs this */ - dev->iobase = pci_resource_start(pcidev, 0); - devpriv->io_addr = ioremap(dev->iobase, DT3000_SIZE); + pci_base = pci_resource_start(pcidev, 0); + devpriv->io_addr = ioremap(pci_base, DT3000_SIZE); if (!devpriv->io_addr) return -ENOMEM; From a26f4dd0ebd18f061366ca0231fdb74210e16140 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 20 Jul 2012 10:33:08 -0700 Subject: [PATCH 0298/1098] staging: comedi: rtd520: ioremap'ed addresses are resource_size_t As mentioned by Ian Abbott, the pci address passed to ioremap should be a resource_size_t not an unsigned long. Use a local variable of that type to hold the pci_resource_start() that is passed to ioremp(). Set the dev->iobase to a dummy non-zero value so that the "detach" can use it as a flag to know that comedi_pci_disable() needs to be called. Reported-by: Ian Abbott Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/rtd520.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 112fdc3e9c69..5aa8be1e7b92 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1619,9 +1619,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) struct rtdPrivate *devpriv; struct pci_dev *pcidev; struct comedi_subdevice *s; + resource_size_t pci_base; int ret; - resource_size_t physLas1; /* data area */ - resource_size_t physLcfg; /* PLX9080 */ #ifdef USE_DMA int index; #endif @@ -1655,20 +1654,15 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) printk(KERN_INFO "Failed to enable PCI device and request regions.\n"); return ret; } + dev->iobase = 1; /* the "detach" needs this */ - /* - * Initialize base addresses - */ - /* Get the physical address from PCI config */ - dev->iobase = pci_resource_start(pcidev, LAS0_PCIINDEX); - physLas1 = pci_resource_start(pcidev, LAS1_PCIINDEX); - physLcfg = pci_resource_start(pcidev, LCFG_PCIINDEX); - /* Now have the kernel map this into memory */ - /* ASSUME page aligned */ - devpriv->las0 = ioremap_nocache(dev->iobase, LAS0_PCISIZE); - devpriv->las1 = ioremap_nocache(physLas1, LAS1_PCISIZE); - devpriv->lcfg = ioremap_nocache(physLcfg, LCFG_PCISIZE); - + /* Initialize the base addresses */ + pci_base = pci_resource_start(pcidev, LAS0_PCIINDEX); + devpriv->las0 = ioremap_nocache(pci_base, LAS0_PCISIZE); + pci_base = pci_resource_start(pcidev, LAS1_PCIINDEX); + devpriv->las1 = ioremap_nocache(pci_base, LAS1_PCISIZE); + pci_base = pci_resource_start(pcidev, LCFG_PCIINDEX); + devpriv->lcfg = ioremap_nocache(pci_base, LCFG_PCISIZE); if (!devpriv->las0 || !devpriv->las1 || !devpriv->lcfg) return -ENOMEM; From 4df7309af6f7988da15fc9a0175fc60b997cc0d7 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 1 Aug 2012 20:40:34 +0800 Subject: [PATCH 0299/1098] leds: lp8788: Fix updating scale configuration bits We need to do left shift (cfg->num + LP8788_ISINK_SCALE_OFFSET) bits for updating scale configuration. Signed-off-by: Axel Lin Acked-by: Milo(Woogyom) Kim Tested-by: Milo(Woogyom) Kim Signed-off-by: Bryan Wu --- drivers/leds/leds-lp8788.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c index 53bd136f1ef0..0ade6ebfc914 100644 --- a/drivers/leds/leds-lp8788.c +++ b/drivers/leds/leds-lp8788.c @@ -63,7 +63,7 @@ static int lp8788_led_init_device(struct lp8788_led *led, /* scale configuration */ addr = LP8788_ISINK_CTRL; mask = 1 << (cfg->num + LP8788_ISINK_SCALE_OFFSET); - val = cfg->scale << cfg->num; + val = cfg->scale << (cfg->num + LP8788_ISINK_SCALE_OFFSET); ret = lp8788_update_bits(led->lp, addr, mask, val); if (ret) return ret; From 54f32a35f4d3a653a18a2c8c239f19ae060bd803 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 13 Jul 2012 15:12:03 -0500 Subject: [PATCH 0300/1098] ARM: OMAP2+: Fix dmtimer set source clock failure Calling the dmtimer function omap_dm_timer_set_source() fails if following a call to pm_runtime_put() to disable the timer. For example the following sequence would fail to set the parent clock ... omap_dm_timer_stop(gptimer); omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); The following error message would be seen ... omap_dm_timer_set_source: failed to set timer_32k_ck as parent The problem is that, by design, pm_runtime_put() simply decrements the usage count and returns before the timer has actually been disabled. Therefore, setting the parent clock failed because the timer was still active when the trying to set the parent clock. Setting a parent clock will fail if the clock you are setting the parent of has a non-zero usage count. To ensure that this does not fail use pm_runtime_put_sync() when disabling the timer. Note that this will not be seen on OMAP1 devices, because these devices do not use the clock framework for dmtimers. Signed-off-by: Jon Hunter Acked-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a9..7b6689af0cce 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); From 70d291b215721ce60bde5761e3eaf6a15f7d7671 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: [PATCH 0301/1098] ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs Adds support for setting HDMI platform data for Exynos4X12 SoCs. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce35538..3f3c941d9081 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -748,7 +748,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; From ee21ae6809e22676cd014ce02ec3b3387b436aa5 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: [PATCH 0302/1098] ARM: SAMSUNG: Add API to set platform data for s5p-tv driver Commit 350f2f4dad64 ("[media] v4l: s5p-tv: hdmi: add support for platform data") makes the presence of platform data mandatory for s5p-tv driver. Adding an API to plat-samsung for this purpose. Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 26 +++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/hdmi.h | 16 ++++++++++++++ 2 files changed, 42 insertions(+) create mode 100644 arch/arm/plat-samsung/include/plat/hdmi.h diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 3f3c941d9081..fc49f3dabd76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -760,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 000000000000..331d046ac2c5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ From cceb840904d1c1f7ee453bfa9886117c6931bdbf Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: [PATCH 0303/1098] ARM: EXYNOS: Set HDMI platform data in SMDKV310 Sets HDMI platform data in SMDKV310 board. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-smdkv310.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a..73f2bce097e1 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); From ccc61fd460fc1b20480dbb7e10b2ea82433bfd58 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: [PATCH 0304/1098] ARM: EXYNOS: Set HDMI platform data in Origen board Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-origen.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7..4e574c24581c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; From 012e7eb1e501d0120e0383b81477f63091f5e365 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 8 Aug 2012 08:43:37 +0200 Subject: [PATCH 0305/1098] ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad The same ID is twice in the quirk table, so the second one is not used. Signed-off-by: David Henningsson Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index daa5103eb936..4f81dd44c837 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6099,6 +6099,8 @@ static const struct alc_fixup alc269_fixups[] = { [ALC269_FIXUP_PCM_44K] = { .type = ALC_FIXUP_FUNC, .v.func = alc269_fixup_pcm_44k, + .chained = true, + .chain_id = ALC269_FIXUP_QUANTA_MUTE }, [ALC269_FIXUP_STEREO_DMIC] = { .type = ALC_FIXUP_FUNC, @@ -6210,8 +6212,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), - SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_QUANTA_MUTE), - SND_PCI_QUIRK(0x17aa, 0x3bf8, "Lenovo Ideapd", ALC269_FIXUP_PCM_44K), + SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), #if 0 From 0d8957c8a90bbb5d34fab9a304459448a5131e06 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 7 Aug 2012 09:54:14 +0200 Subject: [PATCH 0306/1098] drm/i915: correctly order the ring init sequence We may only start to set up the new register values after having confirmed that the ring is truely off. Otherwise the hw might lose the newly written register values. This is caught later on in the init sequence, when we check whether the register writes have stuck. Cc: stable@vger.kernel.org Reviewed-by: Jani Nikula Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522 Tested-by: Yang Guang Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index bf0195a96d53..414af1e2973b 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -289,8 +289,6 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_WRITE_HEAD(ring, 0); ring->write_tail(ring, 0); - /* Initialize the ring. */ - I915_WRITE_START(ring, obj->gtt_offset); head = I915_READ_HEAD(ring) & HEAD_ADDR; /* G45 ring initialization fails to reset head to zero */ @@ -316,6 +314,11 @@ static int init_ring_common(struct intel_ring_buffer *ring) } } + /* Initialize the ring. This must happen _after_ we've cleared the ring + * registers with the above sequence (the readback of the HEAD registers + * also enforces ordering), otherwise the hw might lose the new ring + * register values. */ + I915_WRITE_START(ring, obj->gtt_offset); I915_WRITE_CTL(ring, ((ring->size - PAGE_SIZE) & RING_NR_PAGES) | RING_VALID); From 48a08bab3066a9452216f8c52e0d6f35566de04d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 8 Aug 2012 00:47:21 -0300 Subject: [PATCH 0307/1098] ASoC: mxs: Fix the name of the SoC family SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/mxs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/mxs/Kconfig b/sound/soc/mxs/Kconfig index 99a997f19bb9..b6fa77678d97 100644 --- a/sound/soc/mxs/Kconfig +++ b/sound/soc/mxs/Kconfig @@ -10,7 +10,7 @@ menuconfig SND_MXS_SOC if SND_MXS_SOC config SND_SOC_MXS_SGTL5000 - tristate "SoC Audio support for i.MX boards with sgtl5000" + tristate "SoC Audio support for MXS boards with sgtl5000" depends on I2C select SND_SOC_SGTL5000 help From eb0c5686b3c6332892b3eb5d8bb9eb04f943cb25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 8 Aug 2012 00:50:19 +0200 Subject: [PATCH 0308/1098] regulator: gpio-regulator: Split setting of voltages and currents Originally gpio-regulator used the first item of its state list that matched the given voltage or current range. Commit 4dbd8f63f0 (regulator: gpio-regulator: Set the smallest voltage/current in the specified range) changed this, to make the selection independent of the ordering of the state list. But selecting the minimal value is only true for voltage regulators. For current regulators the maximum in the given range should be selected instead. Therefore split the previous common selection function into specific functions for voltage and current regulators. Signed-off-by: Heiko Stuebner Signed-off-by: Mark Brown --- drivers/regulator/gpio-regulator.c | 38 ++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 34b67bee9323..8b5944f2d7d1 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -57,16 +57,17 @@ static int gpio_regulator_get_value(struct regulator_dev *dev) return -EINVAL; } -static int gpio_regulator_set_value(struct regulator_dev *dev, - int min, int max, unsigned *selector) +static int gpio_regulator_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV, + unsigned *selector) { struct gpio_regulator_data *data = rdev_get_drvdata(dev); int ptr, target = 0, state, best_val = INT_MAX; for (ptr = 0; ptr < data->nr_states; ptr++) if (data->states[ptr].value < best_val && - data->states[ptr].value >= min && - data->states[ptr].value <= max) { + data->states[ptr].value >= min_uV && + data->states[ptr].value <= max_uV) { target = data->states[ptr].gpios; best_val = data->states[ptr].value; if (selector) @@ -85,13 +86,6 @@ static int gpio_regulator_set_value(struct regulator_dev *dev, return 0; } -static int gpio_regulator_set_voltage(struct regulator_dev *dev, - int min_uV, int max_uV, - unsigned *selector) -{ - return gpio_regulator_set_value(dev, min_uV, max_uV, selector); -} - static int gpio_regulator_list_voltage(struct regulator_dev *dev, unsigned selector) { @@ -106,7 +100,27 @@ static int gpio_regulator_list_voltage(struct regulator_dev *dev, static int gpio_regulator_set_current_limit(struct regulator_dev *dev, int min_uA, int max_uA) { - return gpio_regulator_set_value(dev, min_uA, max_uA, NULL); + struct gpio_regulator_data *data = rdev_get_drvdata(dev); + int ptr, target = 0, state, best_val = 0; + + for (ptr = 0; ptr < data->nr_states; ptr++) + if (data->states[ptr].value > best_val && + data->states[ptr].value >= min_uA && + data->states[ptr].value <= max_uA) { + target = data->states[ptr].gpios; + best_val = data->states[ptr].value; + } + + if (best_val == 0) + return -EINVAL; + + for (ptr = 0; ptr < data->nr_gpios; ptr++) { + state = (target & (1 << ptr)) >> ptr; + gpio_set_value(data->gpios[ptr].gpio, state); + } + data->state = target; + + return 0; } static struct regulator_ops gpio_regulator_voltage_ops = { From 0865a75d4166bddc533fd50831829ceefb94f9b0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 7 Aug 2012 16:51:34 -0300 Subject: [PATCH 0309/1098] ASoC: imx-ssi: Remove mono support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Playing a mono track results in incorrect playback rate, ie, the audio is played at a faster rate. Remove mono support in the driver by setting 'channes_min' to dual-channel and this allows mono tracks to be played correctly. Reported-by: Gaëtan Carlier Tested-by: Gaëtan Carlier Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/imx-ssi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 28dd76c7cb1c..81d7728cf67f 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -380,13 +380,14 @@ static int imx_ssi_dai_probe(struct snd_soc_dai *dai) static struct snd_soc_dai_driver imx_ssi_dai = { .probe = imx_ssi_dai_probe, .playback = { - .channels_min = 1, + /* The SSI does not support monaural audio. */ + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = SNDRV_PCM_FMTBIT_S16_LE, }, .capture = { - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = SNDRV_PCM_FMTBIT_S16_LE, From 6c691b5df1fcd93f2e9f65e1a8a3dd0e6fd158ea Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Tue, 7 Aug 2012 18:29:45 +0200 Subject: [PATCH 0310/1098] omap: Fix multi.h when only ARCH_OMAP3 and SOC_AM33XX are selected When only ARCH_OMAP3 (or -2,-4,...) and SOC_AM33XX are selected, multi.h doesn't set MULTI_OMAP2. In this case, cpu.h will simply define cpu_is_omap24xx() as 1. This causes problems for example for omap_hwmod.c:omap_hwmod_init which checks for cpu_is_omap24xx() first, using the wrong soc_ops for AM33xx. Fix this by defining MULTI_OMAP2 when using SOC_AM33XX together with something else. Signed-off-by: Jan Luebbe Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/multi.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f1067..324d31b14852 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ From 90f7f9acecc6dde87cf25db1ad7599926d6773f7 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 7 Aug 2012 19:44:01 +0530 Subject: [PATCH 0311/1098] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2 AM33XX device falls under omap2 class, so make cpu_class_is_omap2() macro true by adding soc_is_am33xx() to existing list of cpu/soc check. This is required to unblock the basic boot support on AM335x platform. Having done that, we still need to sort out properly from common zImage point of view without having to maintain this cpu/soc_is_xxx list. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcfff..bb5d08a70dbc 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 From d0503513817bc6175cededcbe146e06b0ea20f68 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 30 Jul 2012 10:04:39 +0200 Subject: [PATCH 0312/1098] s390/mm: remove MAX_PHYSADDR_BITS define It's unused, so remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/sparsemem.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h index 0fb34027d3f6..a60d085ddb4d 100644 --- a/arch/s390/include/asm/sparsemem.h +++ b/arch/s390/include/asm/sparsemem.h @@ -4,13 +4,11 @@ #ifdef CONFIG_64BIT #define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 46 #define MAX_PHYSMEM_BITS 46 #else #define SECTION_SIZE_BITS 25 -#define MAX_PHYSADDR_BITS 31 #define MAX_PHYSMEM_BITS 31 #endif /* CONFIG_64BIT */ From e206d3da58803de5cd38dc728f6da5221ec18ab0 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 31 Jul 2012 11:01:30 +0200 Subject: [PATCH 0313/1098] s390/sclp_sdias: Add missing break and "fall through" If the last block of the HSA is read, EVSTATE_ALL_STORED is returned by SCLP. Because of a missing break in the switch statement two trace entries are written in this case: "all stored" and "part stored". This patch adds the missing break and also adds a "fall through" comment to improve the readability. Signed-off-by: Michael Holzheu Reported-by: David A Gilbert Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_sdias.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/char/sclp_sdias.c b/drivers/s390/char/sclp_sdias.c index 6a6f76bf6e3d..b1032931a1c4 100644 --- a/drivers/s390/char/sclp_sdias.c +++ b/drivers/s390/char/sclp_sdias.c @@ -242,11 +242,13 @@ int sclp_sdias_copy(void *dest, int start_blk, int nr_blks) switch (sdias_evbuf.event_status) { case EVSTATE_ALL_STORED: TRACE("all stored\n"); + break; case EVSTATE_PART_STORED: TRACE("part stored: %i\n", sdias_evbuf.blk_cnt); break; case EVSTATE_NO_DATA: TRACE("no data\n"); + /* fall through */ default: pr_err("Error from SCLP while copying hsa. " "Event status = %x\n", From c63cb468f373f479ff52b4a1b75f8ecdeaaf4f16 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 31 Jul 2012 15:37:13 +0200 Subject: [PATCH 0314/1098] s390/seccomp: add support for system call filtering using BPF Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 + arch/s390/include/asm/syscall.h | 10 ++++++++++ arch/s390/kernel/ptrace.c | 7 ++++++- 3 files changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 76de6b68487c..107610e01a29 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -124,6 +124,7 @@ config S390 select GENERIC_TIME_VSYSCALL select GENERIC_CLOCKEVENTS select KTIME_SCALAR if 32BIT + select HAVE_ARCH_SECCOMP_FILTER config SCHED_OMIT_FRAME_POINTER def_bool y diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index fb214dd9b7e0..fe7b99759e12 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSCALL_H #define _ASM_SYSCALL_H 1 +#include #include #include #include @@ -87,4 +88,13 @@ static inline void syscall_set_arguments(struct task_struct *task, regs->orig_gpr2 = args[0]; } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_31BIT)) + return AUDIT_ARCH_S390; +#endif + return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390; +} #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f4eb37680b91..e4be113fbac6 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -719,7 +719,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) long ret = 0; /* Do the secure computing check first. */ - secure_computing_strict(regs->gprs[2]); + if (secure_computing(regs->gprs[2])) { + /* seccomp failures shouldn't expose any additional code. */ + ret = -1; + goto out; + } /* * The sysc_tracesys code in entry.S stored the system @@ -745,6 +749,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) regs->gprs[2], regs->orig_gpr2, regs->gprs[3], regs->gprs[4], regs->gprs[5]); +out: return ret ?: regs->gprs[2]; } From 5ab37e1b226b7b40a44eea7d8d1fe19e67ff65a9 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 2 Aug 2012 09:11:23 +0200 Subject: [PATCH 0315/1098] s390: do not clobber personality flags in sys_32_personality() There are multiple errors in how sys_32_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/sys_s390.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index b4a29eee41b8..d0964d22adb5 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -81,11 +81,12 @@ SYSCALL_DEFINE1(s390_personality, unsigned int, personality) { unsigned int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } From 82aabdb6f1eb61e0034ec23901480f5dd23db7c4 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 7 Aug 2012 09:48:13 +0200 Subject: [PATCH 0316/1098] s390/compat: fix compat wrappers for process_vm system calls The compat wrappers incorrectly called the non compat versions of the system process_vm system calls. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_wrapper.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index e835d6d5b7fd..2d82cfcbce5b 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1635,7 +1635,7 @@ ENTRY(compat_sys_process_vm_readv_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_readv + jg compat_sys_process_vm_readv ENTRY(compat_sys_process_vm_writev_wrapper) lgfr %r2,%r2 # compat_pid_t @@ -1645,4 +1645,4 @@ ENTRY(compat_sys_process_vm_writev_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_writev + jg compat_sys_process_vm_writev From e85871218513c54f7dfdb6009043cb638f2fecbe Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 8 Aug 2012 09:32:20 +0200 Subject: [PATCH 0317/1098] s390/compat: fix mmap compat system calls The native 31 bit and the compat behaviour for the mmap system calls differ: In native 31 bit mode the passed in address for the mmap system call will be unmodified passed to sys_mmap_pgoff(). In compat mode however the passed in address will be modified with compat_ptr() which masks out the most significant bit. The result is that in native 31 bit mode each mmap request (with MAP_FIXED) will fail where the most significat bit is set, while in compat mode it may succeed. This odd behaviour was introduced with d3815898 "[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls". To restore a consistent behaviour accross native and compat mode this patch functionally reverts the above mentioned commit. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_linux.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index d1225089a4bb..f606d935f495 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -620,7 +620,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) return -EFAULT; if (a.offset & ~PAGE_MASK) return -EINVAL; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); } @@ -631,7 +630,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); } From ed36081350d2ca4f692f04c6a2d24d1e3a339da1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:12:52 +0200 Subject: [PATCH 0318/1098] ALSA: hda - Add codec->pcm_format_first flag Introduced a new flag to set up the PCM stream format at first before the stream_id and channel tag. Some codecs (e.g. CA0132) seem preferring this over stream_id -> format order. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 69 +++++++++++++++++++++++++-------------- sound/pci/hda/hda_codec.h | 1 + 2 files changed, 46 insertions(+), 24 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 88a9c20eb7a2..598b9e2d85e6 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1386,6 +1386,44 @@ int snd_hda_codec_configure(struct hda_codec *codec) } EXPORT_SYMBOL_HDA(snd_hda_codec_configure); +/* update the stream-id if changed */ +static void update_pcm_stream_id(struct hda_codec *codec, + struct hda_cvt_setup *p, hda_nid_t nid, + u32 stream_tag, int channel_id) +{ + unsigned int oldval, newval; + + if (p->stream_tag != stream_tag || p->channel_id != channel_id) { + oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); + newval = (stream_tag << 4) | channel_id; + if (oldval != newval) + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_CHANNEL_STREAMID, + newval); + p->stream_tag = stream_tag; + p->channel_id = channel_id; + } +} + +/* update the format-id if changed */ +static void update_pcm_format(struct hda_codec *codec, struct hda_cvt_setup *p, + hda_nid_t nid, int format) +{ + unsigned int oldval; + + if (p->format_id != format) { + oldval = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_STREAM_FORMAT, 0); + if (oldval != format) { + msleep(1); + snd_hda_codec_write(codec, nid, 0, + AC_VERB_SET_STREAM_FORMAT, + format); + } + p->format_id = format; + } +} + /** * snd_hda_codec_setup_stream - set up the codec for streaming * @codec: the CODEC to set up @@ -1400,7 +1438,6 @@ void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid, { struct hda_codec *c; struct hda_cvt_setup *p; - unsigned int oldval, newval; int type; int i; @@ -1413,29 +1450,13 @@ void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid, p = get_hda_cvt_setup(codec, nid); if (!p) return; - /* update the stream-id if changed */ - if (p->stream_tag != stream_tag || p->channel_id != channel_id) { - oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); - newval = (stream_tag << 4) | channel_id; - if (oldval != newval) - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CHANNEL_STREAMID, - newval); - p->stream_tag = stream_tag; - p->channel_id = channel_id; - } - /* update the format-id if changed */ - if (p->format_id != format) { - oldval = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_STREAM_FORMAT, 0); - if (oldval != format) { - msleep(1); - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_STREAM_FORMAT, - format); - } - p->format_id = format; - } + + if (codec->pcm_format_first) + update_pcm_format(codec, p, nid, format); + update_pcm_stream_id(codec, p, nid, stream_tag, channel_id); + if (!codec->pcm_format_first) + update_pcm_format(codec, p, nid, format); + p->active = 1; p->dirty = 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index c422d330ca54..7fbc1bcaf1a9 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -861,6 +861,7 @@ struct hda_codec { unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */ unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */ unsigned int no_jack_detect:1; /* Machine has no jack-detection */ + unsigned int pcm_format_first:1; /* PCM format must be set first */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ int power_transition; /* power-state in transition */ From 55cf87fe0e9783e25f442be1e48b8319d86131ea Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:15:55 +0200 Subject: [PATCH 0319/1098] ALSA: hda - Fix superfluous "-in" suffix from CA0132 capture items Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index d0d3540e39e7..2685590925ff 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -988,12 +988,12 @@ static void ca0132_config(struct hda_codec *codec) /* Mic-in */ spec->input_pins[0] = 0x12; - spec->input_labels[0] = "Mic-In"; + spec->input_labels[0] = "Mic"; spec->adcs[0] = 0x07; /* Line-In */ spec->input_pins[1] = 0x11; - spec->input_labels[1] = "Line-In"; + spec->input_labels[1] = "Line"; spec->adcs[1] = 0x08; spec->num_inputs = 2; } From 27ebeb0b1b5bb26908e485a7e8bd2ec30366ffef Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:20:18 +0200 Subject: [PATCH 0320/1098] ALSA: hda - Use the standard PCM ops for CA0132 Now with the workaround using codec->pcm_format_first flag, we can clean up the home-baked codes in patch_ca0132.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 150 ++++++++--------------------------- 1 file changed, 33 insertions(+), 117 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 2685590925ff..31512a0f1d07 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -463,51 +463,18 @@ exit: return err; } -/* - * PCM stuffs - */ -static void ca0132_setup_stream(struct hda_codec *codec, hda_nid_t nid, - u32 stream_tag, - int channel_id, int format) -{ - unsigned int oldval, newval; - - if (!nid) - return; - - snd_printdd("ca0132_setup_stream: " - "NID=0x%x, stream=0x%x, channel=%d, format=0x%x\n", - nid, stream_tag, channel_id, format); - - /* update the format-id if changed */ - oldval = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_STREAM_FORMAT, - 0); - if (oldval != format) { - msleep(20); - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_STREAM_FORMAT, - format); - } - - oldval = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0); - newval = (stream_tag << 4) | channel_id; - if (oldval != newval) { - snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_CHANNEL_STREAMID, - newval); - } -} - -static void ca0132_cleanup_stream(struct hda_codec *codec, hda_nid_t nid) -{ - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0); - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID, 0); -} - /* * PCM callbacks */ +static int ca0132_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0132_spec *spec = codec->spec; + return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream, + hinfo); +} + static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, @@ -515,10 +482,8 @@ static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dacs[0], stream_tag, 0, format); - - return 0; + return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, + stream_tag, format, substream); } static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, @@ -526,15 +491,20 @@ static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dacs[0]); - - return 0; + return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); } /* * Digital out */ +static int ca0132_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) +{ + struct ca0132_spec *spec = codec->spec; + return snd_hda_multi_out_dig_open(codec, &spec->multiout); +} + static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct hda_codec *codec, unsigned int stream_tag, @@ -542,10 +512,8 @@ static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dig_out, stream_tag, 0, format); - - return 0; + return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, + stream_tag, format, substream); } static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, @@ -553,65 +521,15 @@ static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dig_out); - - return 0; + return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); } -/* - * Analog capture - */ -static int ca0132_capture_pcm_prepare(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - unsigned int stream_tag, - unsigned int format, - struct snd_pcm_substream *substream) +static int ca0132_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream) { struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->adcs[substream->number], - stream_tag, 0, format); - - return 0; -} - -static int ca0132_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) -{ - struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->adcs[substream->number]); - - return 0; -} - -/* - * Digital capture - */ -static int ca0132_dig_capture_pcm_prepare(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - unsigned int stream_tag, - unsigned int format, - struct snd_pcm_substream *substream) -{ - struct ca0132_spec *spec = codec->spec; - - ca0132_setup_stream(codec, spec->dig_in, stream_tag, 0, format); - - return 0; -} - -static int ca0132_dig_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, - struct hda_codec *codec, - struct snd_pcm_substream *substream) -{ - struct ca0132_spec *spec = codec->spec; - - ca0132_cleanup_stream(codec, spec->dig_in); - - return 0; + return snd_hda_multi_out_dig_close(codec, &spec->multiout); } /* @@ -621,6 +539,7 @@ static struct hda_pcm_stream ca0132_pcm_analog_playback = { .channels_min = 2, .channels_max = 2, .ops = { + .open = ca0132_playback_pcm_open, .prepare = ca0132_playback_pcm_prepare, .cleanup = ca0132_playback_pcm_cleanup }, @@ -630,10 +549,6 @@ static struct hda_pcm_stream ca0132_pcm_analog_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .ops = { - .prepare = ca0132_capture_pcm_prepare, - .cleanup = ca0132_capture_pcm_cleanup - }, }; static struct hda_pcm_stream ca0132_pcm_digital_playback = { @@ -641,6 +556,8 @@ static struct hda_pcm_stream ca0132_pcm_digital_playback = { .channels_min = 2, .channels_max = 2, .ops = { + .open = ca0132_dig_playback_pcm_open, + .close = ca0132_dig_playback_pcm_close, .prepare = ca0132_dig_playback_pcm_prepare, .cleanup = ca0132_dig_playback_pcm_cleanup }, @@ -650,10 +567,6 @@ static struct hda_pcm_stream ca0132_pcm_digital_capture = { .substreams = 1, .channels_min = 2, .channels_max = 2, - .ops = { - .prepare = ca0132_dig_capture_pcm_prepare, - .cleanup = ca0132_dig_capture_pcm_cleanup - }, }; static int ca0132_build_pcms(struct hda_codec *codec) @@ -961,6 +874,9 @@ static void ca0132_config(struct hda_codec *codec) struct ca0132_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; + codec->pcm_format_first = 1; + codec->no_sticky_stream = 1; + /* line-outs */ cfg->line_outs = 1; cfg->line_out_pins[0] = 0x0b; /* front */ From 8e13fc1c5f694a6ae4032c7f94103c137136733f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 8 Aug 2012 17:26:54 +0200 Subject: [PATCH 0321/1098] ALSA: hda - Add missing SPDIF I/O setup for CA0132 CA0132 driver had some codes to handle the S/PDIF I/O, but the actual setups of pins and converters were missing. Now the pins are added. Also, fixed a few points triggering invalid codec verbs and mixer elements since the digital I/O audio widgets on CA0132 have no amp. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 31512a0f1d07..9c0ec0a55bef 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -246,7 +246,7 @@ static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); } - if (dac) + if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP)) snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); } @@ -261,7 +261,7 @@ static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } - if (adc) + if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } @@ -841,18 +841,16 @@ static int ca0132_build_controls(struct hda_codec *codec) spec->dig_out); if (err < 0) return err; - err = add_out_volume(codec, spec->dig_out, "IEC958"); + err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); if (err < 0) return err; + /* spec->multiout.share_spdif = 1; */ } if (spec->dig_in) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); if (err < 0) return err; - err = add_in_volume(codec, spec->dig_in, "IEC958"); - if (err < 0) - return err; } return 0; } @@ -912,6 +910,16 @@ static void ca0132_config(struct hda_codec *codec) spec->input_labels[1] = "Line"; spec->adcs[1] = 0x08; spec->num_inputs = 2; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + spec->dig_in = 0x09; + cfg->dig_in_pin = 0x0e; + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; } static void ca0132_init_chip(struct hda_codec *codec) From 7523ceed42d84c1afaa1dc498bffed53c2aa444e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sun, 5 Aug 2012 22:56:20 +0200 Subject: [PATCH 0322/1098] RTC: Avoid races between RTC alarm wakeup and suspend. If an RTC alarm fires just as suspend is happening, it is possible for suspend to complete and the alarm to be missed. To avoid the race, we must register the event with the PM core. As the event is made visible to userspace through a thread which is only scheduled by the interrupt, we need a pm_stay_awake/pm_relax pair preventing suspend from the interrupt until the thread completes its work. This makes the pm_wakeup_event() call in cmos_interrupt unnecessary as it provides suspend protection for all RTCs that use rtc_update_irq. Signed-off-by: NeilBrown Signed-off-by: Rafael J. Wysocki --- drivers/rtc/interface.c | 2 ++ drivers/rtc/rtc-cmos.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index eb415bd76494..9592b936b71b 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -582,6 +582,7 @@ enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer) void rtc_update_irq(struct rtc_device *rtc, unsigned long num, unsigned long events) { + pm_stay_awake(rtc->dev.parent); schedule_work(&rtc->irqwork); } EXPORT_SYMBOL_GPL(rtc_update_irq); @@ -844,6 +845,7 @@ void rtc_timer_do_work(struct work_struct *work) mutex_lock(&rtc->ops_lock); again: + pm_relax(rtc->dev.parent); __rtc_read_time(rtc, &tm); now = rtc_tm_to_ktime(tm); while ((next = timerqueue_getnext(&rtc->timerqueue))) { diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 132333d75408..4267789ca995 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -568,7 +568,6 @@ static irqreturn_t cmos_interrupt(int irq, void *p) hpet_mask_rtc_irq_bit(RTC_AIE); CMOS_READ(RTC_INTR_FLAGS); - pm_wakeup_event(cmos_rtc.dev, 0); } spin_unlock(&rtc_lock); From d06a8a4fe7d81e8d1fa3d753be9b14c785b4b2e7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 5 Aug 2012 22:56:43 +0200 Subject: [PATCH 0323/1098] drivers/cpufreq/pcc-cpufreq.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/pcc-cpufreq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index cdc02ac8f41a..503996a94a6a 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -454,6 +454,7 @@ static int __init pcc_cpufreq_probe(void) mem_resource->address_length); if (pcch_virt_addr == NULL) { pr_debug("probe: could not map shared mem region\n"); + ret = -ENOMEM; goto out_free; } pcch_hdr = pcch_virt_addr; From 77254950bb174d637cd88d1a74e137ecf3185a65 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 7 Aug 2012 13:50:14 +0200 Subject: [PATCH 0324/1098] PM: Make dev_pm_get_subsys_data() always return 0 on success MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commits 1d5fcfec22 (PM / Domains: Add device domain data reference counter) and 62d4490294 (PM / Domains: Allow device callbacks to be added at any time) added checks for the return value of dev_pm_get_subsys_data(), but those checks were incorrect, because that function returned 1 on success in some cases. Since all of the existing users of dev_pm_get_subsys_data() don't use the positive value returned by it on success, change its definition so that it always returns 0 when successful. Reported-by: Heiko Stübner Reported-by: Tushar Behera Signed-off-by: Rafael J. Wysocki --- drivers/base/power/clock_ops.c | 3 +-- drivers/base/power/common.c | 4 +--- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 869d7ff2227f..eb78e9640c4a 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -169,8 +169,7 @@ void pm_clk_init(struct device *dev) */ int pm_clk_create(struct device *dev) { - int ret = dev_pm_get_subsys_data(dev); - return ret < 0 ? ret : 0; + return dev_pm_get_subsys_data(dev); } /** diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c index a14085cc613f..39c32529b833 100644 --- a/drivers/base/power/common.c +++ b/drivers/base/power/common.c @@ -24,7 +24,6 @@ int dev_pm_get_subsys_data(struct device *dev) { struct pm_subsys_data *psd; - int ret = 0; psd = kzalloc(sizeof(*psd), GFP_KERNEL); if (!psd) @@ -40,7 +39,6 @@ int dev_pm_get_subsys_data(struct device *dev) dev->power.subsys_data = psd; pm_clk_init(dev); psd = NULL; - ret = 1; } spin_unlock_irq(&dev->power.lock); @@ -48,7 +46,7 @@ int dev_pm_get_subsys_data(struct device *dev) /* kfree() verifies that its argument is nonzero. */ kfree(psd); - return ret; + return 0; } EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data); From 300d3739e873d50d4c6e3656f89007a217fb1d29 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 7 Aug 2012 13:50:22 +0200 Subject: [PATCH 0325/1098] Revert "NMI watchdog: fix for lockup detector breakage on resume" Revert commit 45226e9 (NMI watchdog: fix for lockup detector breakage on resume) which breaks resume from system suspend on my SH7372 Mackerel board (by causing a NULL pointer dereference to happen) and is generally wrong, because it abuses the CPU hotplug functionality in a shamelessly blatant way. The original issue should be addressed through appropriate syscore resume callback instead. Signed-off-by: Rafael J. Wysocki --- include/linux/sched.h | 8 -------- kernel/power/suspend.c | 3 --- kernel/watchdog.c | 21 ++------------------- 3 files changed, 2 insertions(+), 30 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index c147e7024f11..b8c86648a2f9 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -334,14 +334,6 @@ static inline void lockup_detector_init(void) } #endif -#if defined(CONFIG_LOCKUP_DETECTOR) && defined(CONFIG_SUSPEND) -void lockup_detector_bootcpu_resume(void); -#else -static inline void lockup_detector_bootcpu_resume(void) -{ -} -#endif - #ifdef CONFIG_DETECT_HUNG_TASK extern unsigned int sysctl_hung_task_panic; extern unsigned long sysctl_hung_task_check_count; diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 1da39ea248fd..c8b7446b27df 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -178,9 +178,6 @@ static int suspend_enter(suspend_state_t state, bool *wakeup) arch_suspend_enable_irqs(); BUG_ON(irqs_disabled()); - /* Kick the lockup detector */ - lockup_detector_bootcpu_resume(); - Enable_cpus: enable_nonboot_cpus(); diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 69add8a9da68..4b1dfba70f7c 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -575,7 +575,7 @@ out: /* * Create/destroy watchdog threads as CPUs come and go: */ -static int +static int __cpuinit cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { int hotcpu = (unsigned long)hcpu; @@ -610,27 +610,10 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) return NOTIFY_OK; } -static struct notifier_block cpu_nfb = { +static struct notifier_block __cpuinitdata cpu_nfb = { .notifier_call = cpu_callback }; -#ifdef CONFIG_SUSPEND -/* - * On exit from suspend we force an offline->online transition on the boot CPU - * so that the PMU state that was lost while in suspended state gets set up - * properly for the boot CPU. This information is required for restarting the - * NMI watchdog. - */ -void lockup_detector_bootcpu_resume(void) -{ - void *cpu = (void *)(long)smp_processor_id(); - - cpu_callback(&cpu_nfb, CPU_DEAD_FROZEN, cpu); - cpu_callback(&cpu_nfb, CPU_UP_PREPARE_FROZEN, cpu); - cpu_callback(&cpu_nfb, CPU_ONLINE_FROZEN, cpu); -} -#endif - void __init lockup_detector_init(void) { void *cpu = (void *)(long)smp_processor_id(); From b2f0fa828ee7265028f1bca87928b0dc69663b53 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 06:20:49 +0000 Subject: [PATCH 0326/1098] mfd/asic3: fix asic3_mfd_probe return value In commit 4f304245b "mfd: Set asic3 DS1WM clock_rate", a possible path through asic3_mfd_probe was introduced that would lead to an unpredictable return value, if everything succeeds but there are pdata->leds is NULL. This was reported correctly by gcc. Without this patch, building magician_defconfig results in: drivers/mfd/asic3.c: In function 'asic3_mfd_probe': drivers/mfd/asic3.c:940:2: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Cc: Paul Parsons Cc: Philipp Zabel Cc: Samuel Ortiz --- drivers/mfd/asic3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 383421bf5760..683e18a23329 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -925,6 +925,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, goto out; } + ret = 0; if (pdata->leds) { int i; From bb1a5805edf1d1e5da02b23dfca76ed99dfa18b1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 07:12:00 +0000 Subject: [PATCH 0327/1098] usb/ohci-omap: remove unused variable Commit c2e935a7d "USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy" removed the last use of the "ohci" variable in the usb_hcd_omap_remove function, but left the variable in place unused. Without this patch, building omap1_defconfig results in: In file included from drivers/usb/host/ohci-hcd.c:1013:0: drivers/usb/host/ohci-omap.c: In function 'usb_hcd_omap_remove': drivers/usb/host/ohci-omap.c:406:19: warning: unused variable 'ohci' [-Wunused-variable] Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Acked-by: Greg Kroah-Hartman Cc: Richard Zhao --- drivers/usb/host/ohci-omap.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e7d75d295988..f8b2d91851f7 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -403,8 +403,6 @@ err0: static inline void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - usb_remove_hcd(hcd); if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); From 50d0206fcaea3e736f912fd5b00ec6233fb4ce44 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 26 Jul 2012 12:03:59 -0700 Subject: [PATCH 0328/1098] xhci: Fix bug after deq ptr set to link TRB. This patch fixes a particularly nasty bug that was revealed by the ring expansion patches. The bug has been present since the very beginning of the xHCI driver history, and could have caused general protection faults from bad memory accesses. The first thing to note is that a Set TR Dequeue Pointer command can move the dequeue pointer to a link TRB, if the canceled or stalled transfer TD ended just before a link TRB. The function to increment the dequeue pointer, inc_deq, was written before cancellation and stall support was added. It assumed that the dequeue pointer could never point to a link TRB. It would unconditionally increment the dequeue pointer at the start of the function, check if the pointer was now on a link TRB, and move it to the top of the next segment if so. This means that if a Set TR Dequeue Point command moved the dequeue pointer to a link TRB, a subsequent call to inc_deq() would move the pointer off the segment and into la-la-land. It would then read from that memory to determine if it was a link TRB. Other functions would often call inc_deq() until the dequeue pointer matched some other pointer, which means this function would quite happily read all of system memory before wrapping around to the right pointer value. Often, there would be another endpoint segment from a different ring allocated from the same DMA pool, which would be contiguous to the segment inc_deq just stepped off of. inc_deq would eventually find the link TRB in that segment, and blindly move the dequeue pointer back to the top of the correct ring segment. The only reason the original code worked at all is because there was only one ring segment. With the ring expansion patches, the dequeue pointer would eventually wrap into place, but the dequeue segment would be out-of-sync. On the second TD after the dequeue pointer was moved to a link TRB, trb_in_td() would fail (because the dequeue pointer and dequeue segment were out-of-sync), and this message would appear: ERROR Transfer event TRB DMA ptr not part of current TD This fixes bugzilla entry 4333 (option-based modem unhappy on USB 3.0 port: "Transfer event TRB DMA ptr not part of current TD", "rejecting I/O to offline device"), https://bugzilla.kernel.org/show_bug.cgi?id=43333 and possibly other general protection fault bugs as well. This patch should be backported to kernels as old as 2.6.31. A separate patch will be created for kernels older than 3.4, since inc_deq was modified in 3.4 and this patch will not apply. Signed-off-by: Sarah Sharp Tested-by: James Ettle Tested-by: Matthew Hall Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 36 ++++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0c93f5dcea6f..643c2f3f3e73 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -145,29 +145,37 @@ static void next_trb(struct xhci_hcd *xhci, */ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) { - union xhci_trb *next; unsigned long long addr; ring->deq_updates++; - /* If this is not event ring, there is one more usable TRB */ + /* + * If this is not event ring, and the dequeue pointer + * is not on a link TRB, there is one more usable TRB + */ if (ring->type != TYPE_EVENT && !last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) ring->num_trbs_free++; - next = ++(ring->dequeue); - /* Update the dequeue pointer further if that was a link TRB or we're at - * the end of an event ring segment (which doesn't have link TRBS) - */ - while (last_trb(xhci, ring, ring->deq_seg, next)) { - if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, - ring, ring->deq_seg, next)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + do { + /* + * Update the dequeue pointer further if that was a link TRB or + * we're at the end of an event ring segment (which doesn't have + * link TRBS) + */ + if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) { + if (ring->type == TYPE_EVENT && + last_trb_on_last_seg(xhci, ring, + ring->deq_seg, ring->dequeue)) { + ring->cycle_state = (ring->cycle_state ? 0 : 1); + } + ring->deq_seg = ring->deq_seg->next; + ring->dequeue = ring->deq_seg->trbs; + } else { + ring->dequeue++; } - ring->deq_seg = ring->deq_seg->next; - ring->dequeue = ring->deq_seg->trbs; - next = ring->dequeue; - } + } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)); + addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); } From 47fbf7976e0b7d9dcdd799e2a1baba19064d9631 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 8 Aug 2012 16:03:13 -0400 Subject: [PATCH 0329/1098] NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done Ever since commit 0a57cdac3f (NFSv4.1 send layoutreturn to fence disconnected data server) we've been sending layoutreturn calls while there is potentially still outstanding I/O to the data servers. The reason we do this is to avoid races between replayed writes to the MDS and the original writes to the DS. When this happens, the BUG_ON() in nfs4_layoutreturn_done can be triggered because it assumes that we would never call layoutreturn without knowing that all I/O to the DS is finished. The fix is to remove the BUG_ON() now that the assumptions behind the test are obsolete. Reported-by: Boaz Harrosh Reported-by: Tigran Mkrtchyan Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>=3.5] --- fs/nfs/nfs4proc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f94f6b3928fc..c77d296bdaa6 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6359,12 +6359,8 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) return; } spin_lock(&lo->plh_inode->i_lock); - if (task->tk_status == 0) { - if (lrp->res.lrs_present) { - pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); - } else - BUG_ON(!list_empty(&lo->plh_segs)); - } + if (task->tk_status == 0 && lrp->res.lrs_present) + pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); lo->plh_block_lgets--; spin_unlock(&lo->plh_inode->i_lock); dprintk("<-- %s\n", __func__); From c6fd893da927c6cefb2ece22402765379921a834 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 31 Jul 2012 10:29:14 -0700 Subject: [PATCH 0330/1098] x86, avx: don't use avx instructions with "noxsave" boot param Clear AVX, AVX2 features along with clearing XSAVE feature bits, as part of the parsing "noxsave" parameter. Fixes the kernel boot panic with "noxsave" boot parameter. We could have checked cpu_has_osxsave along with cpu_has_avx etc, but Peter mentioned clearing the feature bits will be better for uses like static_cpu_has() etc. Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1343755754.2041.2.camel@sbsiddha-desk.sc.intel.com Cc: # v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786d655e..a5fbc3c5fccc 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); From 920d087e44c228be6270e07fdb59043380a4bb00 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 6 Aug 2012 16:08:36 +0000 Subject: [PATCH 0331/1098] drivers: net: irda: bfin_sir: fix compile error Bit IREN is replaced by UMOD_IRDA and UMOD_MASK since blackfin 60x added, but this driver didn't update which will cause bfin_sir build error: drivers/net/irda/bfin_sir.c:161:9: error: 'IREN' undeclared (first use in this function) drivers/net/irda/bfin_sir.c:435:18: error: 'IREN' undeclared (first use in this function) drivers/net/irda/bfin_sir.c:521:11: error: 'IREN' undeclared (first use in this function) This patch fix it. Signed-off-by: Sonic Zhang Signed-off-by: Bob Liu Acked-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/bfin_sir.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c index a561ae44a9ac..c6a0299aa9f9 100644 --- a/drivers/net/irda/bfin_sir.c +++ b/drivers/net/irda/bfin_sir.c @@ -158,7 +158,7 @@ static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed) /* If not add the 'RPOLC', we can't catch the receive interrupt. * It's related with the HW layout and the IR transiver. */ - val |= IREN | RPOLC; + val |= UMOD_IRDA | RPOLC; UART_PUT_GCTL(port, val); return ret; } @@ -432,7 +432,7 @@ static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev bfin_sir_stop_rx(port); val = UART_GET_GCTL(port); - val &= ~(UCEN | IREN | RPOLC); + val &= ~(UCEN | UMOD_MASK | RPOLC); UART_PUT_GCTL(port, val); #ifdef CONFIG_SIR_BFIN_DMA @@ -518,10 +518,10 @@ static void bfin_sir_send_work(struct work_struct *work) * reset all the UART. */ val = UART_GET_GCTL(port); - val &= ~(IREN | RPOLC); + val &= ~(UMOD_MASK | RPOLC); UART_PUT_GCTL(port, val); SSYNC(); - val |= IREN | RPOLC; + val |= UMOD_IRDA | RPOLC; UART_PUT_GCTL(port, val); SSYNC(); /* bfin_sir_set_speed(port, self->speed); */ From 99aa3473e672ca610905838997fa018b95cd643f Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Mon, 6 Aug 2012 16:27:10 +0000 Subject: [PATCH 0332/1098] af_packet: Quiet sparse noise about using plain integer as NULL pointer Quiets the sparse warning: warning: Using plain integer as NULL pointer Signed-off-by: Ying Xue Signed-off-by: David S. Miller --- net/packet/af_packet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index ceaca7c134a0..f016f6634a79 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1079,7 +1079,7 @@ static void *packet_current_rx_frame(struct packet_sock *po, default: WARN(1, "TPACKET version not supported\n"); BUG(); - return 0; + return NULL; } } From 08252b32311c3fa84219ad794d640af7399b5485 Mon Sep 17 00:00:00 2001 From: Gao feng Date: Tue, 7 Aug 2012 00:23:11 +0000 Subject: [PATCH 0333/1098] pptp: lookup route with the proper net namespace pptp always use init_net as the net namespace to lookup route, this will cause route lookup failed in container. because we already set the correct net namespace to struct sock in pptp_create,so fix this by using sock_net(sk) to replace &init_net. Signed-off-by: Gao feng Signed-off-by: David S. Miller --- drivers/net/ppp/pptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 1c98321b56cc..162464fe86bf 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -189,7 +189,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb) if (sk_pppox(po)->sk_state & PPPOX_DEAD) goto tx_error; - rt = ip_route_output_ports(&init_net, &fl4, NULL, + rt = ip_route_output_ports(sock_net(sk), &fl4, NULL, opt->dst_addr.sin_addr.s_addr, opt->src_addr.sin_addr.s_addr, 0, 0, IPPROTO_GRE, @@ -468,7 +468,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.private = sk; po->chan.ops = &pptp_chan_ops; - rt = ip_route_output_ports(&init_net, &fl4, sk, + rt = ip_route_output_ports(sock_net(sk), &fl4, sk, opt->dst_addr.sin_addr.s_addr, opt->src_addr.sin_addr.s_addr, 0, 0, From 0c03eca3d995e73d691edea8c787e25929ec156d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 7 Aug 2012 00:47:11 +0000 Subject: [PATCH 0334/1098] net: fib: fix incorrect call_rcu_bh() After IP route cache removal, I believe rcu_bh() has very little use and we should remove this RCU variant, since it adds some cycles in fast path. Anyway, the call_rcu_bh() use in fib_true is obviously wrong, since some users only assert rcu_read_lock(). Signed-off-by: Eric Dumazet Cc: "Paul E. McKenney" Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index f0cdb30921c0..57bd978483e1 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -367,7 +367,7 @@ static void __leaf_free_rcu(struct rcu_head *head) static inline void free_leaf(struct leaf *l) { - call_rcu_bh(&l->rcu, __leaf_free_rcu); + call_rcu(&l->rcu, __leaf_free_rcu); } static inline void free_leaf_info(struct leaf_info *leaf) From a37e6e344910a43b9ebc2bbf29a029f5ea942598 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 7 Aug 2012 10:55:45 +0000 Subject: [PATCH 0335/1098] net: force dst_default_metrics to const section While investigating on network performance problems, I found this little gem : $ nm -v vmlinux | grep -1 dst_default_metrics ffffffff82736540 b busy.46605 ffffffff82736560 B dst_default_metrics ffffffff82736598 b dst_busy_list Apparently, declaring a const array without initializer put it in (writeable) bss section, in middle of possibly often dirtied cache lines. Since we really want dst_default_metrics be const to avoid any possible false sharing and catch any buggy writes, I force a null initializer. ffffffff818a4c20 R dst_default_metrics Signed-off-by: Eric Dumazet Cc: Ben Hutchings Signed-off-by: David S. Miller --- include/net/dst.h | 2 +- net/core/dst.c | 10 +++++++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index baf597890064..621e3513ef5e 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -110,7 +110,7 @@ struct dst_entry { }; extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old); -extern const u32 dst_default_metrics[RTAX_MAX]; +extern const u32 dst_default_metrics[]; #define DST_METRICS_READ_ONLY 0x1UL #define __DST_METRICS_PTR(Y) \ diff --git a/net/core/dst.c b/net/core/dst.c index 069d51d29414..56d63612e1e4 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -149,7 +149,15 @@ int dst_discard(struct sk_buff *skb) } EXPORT_SYMBOL(dst_discard); -const u32 dst_default_metrics[RTAX_MAX]; +const u32 dst_default_metrics[RTAX_MAX + 1] = { + /* This initializer is needed to force linker to place this variable + * into const section. Otherwise it might end into bss section. + * We really want to avoid false sharing on this variable, and catch + * any writes on it. + */ + [RTAX_MAX] = 0xdeadbeef, +}; + void *dst_alloc(struct dst_ops *ops, struct net_device *dev, int initial_ref, int initial_obsolete, unsigned short flags) From be72f63b4cd5d6778cf7eb0d0a86f18f96b51c0c Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Tue, 7 Aug 2012 07:27:25 +0000 Subject: [PATCH 0336/1098] sched: add missing group change to qfq_change_class [Resending again, as the text was corrupted by the email client] To speed up operations, QFQ internally divides classes into groups. Which group a class belongs to depends on the ratio between the maximum packet length and the weight of the class. Unfortunately the function qfq_change_class lacks the steps for changing the group of a class when the ratio max_pkt_len/weight of the class changes. For example, when the last of the following three commands is executed, the group of class 1:1 is not correctly changed: tc disc add dev XXX root handle 1: qfq tc class add dev XXX parent 1: qfq classid 1:1 weight 1 tc class change dev XXX parent 1: classid 1:1 qfq weight 4 Not changing the group of a class does not affect the long-term bandwidth guaranteed to the class, as the latter is independent of the maximum packet length, and correctly changes (only) if the weight of the class changes. In contrast, if the group of the class is not updated, the class is still guaranteed the short-term bandwidth and packet delay related to its old group, instead of the guarantees that it should receive according to its new weight and/or maximum packet length. This may also break service guarantees for other classes. This patch adds the missing operations. Signed-off-by: Paolo Valente Signed-off-by: David S. Miller --- net/sched/sch_qfq.c | 95 ++++++++++++++++++++++++++++++++------------- 1 file changed, 69 insertions(+), 26 deletions(-) diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index 9af01f3df18c..e4723d31fdd5 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -203,6 +203,34 @@ out: return index; } +/* Length of the next packet (0 if the queue is empty). */ +static unsigned int qdisc_peek_len(struct Qdisc *sch) +{ + struct sk_buff *skb; + + skb = sch->ops->peek(sch); + return skb ? qdisc_pkt_len(skb) : 0; +} + +static void qfq_deactivate_class(struct qfq_sched *, struct qfq_class *); +static void qfq_activate_class(struct qfq_sched *q, struct qfq_class *cl, + unsigned int len); + +static void qfq_update_class_params(struct qfq_sched *q, struct qfq_class *cl, + u32 lmax, u32 inv_w, int delta_w) +{ + int i; + + /* update qfq-specific data */ + cl->lmax = lmax; + cl->inv_w = inv_w; + i = qfq_calc_index(cl->inv_w, cl->lmax); + + cl->grp = &q->groups[i]; + + q->wsum += delta_w; +} + static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **tca, unsigned long *arg) { @@ -250,6 +278,8 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, lmax = 1UL << QFQ_MTU_SHIFT; if (cl != NULL) { + bool need_reactivation = false; + if (tca[TCA_RATE]) { err = gen_replace_estimator(&cl->bstats, &cl->rate_est, qdisc_root_sleeping_lock(sch), @@ -258,12 +288,29 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, return err; } - if (inv_w != cl->inv_w) { - sch_tree_lock(sch); - q->wsum += delta_w; - cl->inv_w = inv_w; - sch_tree_unlock(sch); + if (lmax == cl->lmax && inv_w == cl->inv_w) + return 0; /* nothing to update */ + + i = qfq_calc_index(inv_w, lmax); + sch_tree_lock(sch); + if (&q->groups[i] != cl->grp && cl->qdisc->q.qlen > 0) { + /* + * shift cl->F back, to not charge the + * class for the not-yet-served head + * packet + */ + cl->F = cl->S; + /* remove class from its slot in the old group */ + qfq_deactivate_class(q, cl); + need_reactivation = true; } + + qfq_update_class_params(q, cl, lmax, inv_w, delta_w); + + if (need_reactivation) /* activate in new group */ + qfq_activate_class(q, cl, qdisc_peek_len(cl->qdisc)); + sch_tree_unlock(sch); + return 0; } @@ -273,11 +320,8 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, cl->refcnt = 1; cl->common.classid = classid; - cl->lmax = lmax; - cl->inv_w = inv_w; - i = qfq_calc_index(cl->inv_w, cl->lmax); - cl->grp = &q->groups[i]; + qfq_update_class_params(q, cl, lmax, inv_w, delta_w); cl->qdisc = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, classid); @@ -294,7 +338,6 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, return err; } } - q->wsum += weight; sch_tree_lock(sch); qdisc_class_hash_insert(&q->clhash, &cl->common); @@ -711,15 +754,6 @@ static void qfq_update_eligible(struct qfq_sched *q, u64 old_V) } } -/* What is length of next packet in queue (0 if queue is empty) */ -static unsigned int qdisc_peek_len(struct Qdisc *sch) -{ - struct sk_buff *skb; - - skb = sch->ops->peek(sch); - return skb ? qdisc_pkt_len(skb) : 0; -} - /* * Updates the class, returns true if also the group needs to be updated. */ @@ -843,11 +877,8 @@ static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl) static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) { struct qfq_sched *q = qdisc_priv(sch); - struct qfq_group *grp; struct qfq_class *cl; int err; - u64 roundedS; - int s; cl = qfq_classify(skb, sch, &err); if (cl == NULL) { @@ -876,11 +907,25 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) return err; /* If reach this point, queue q was idle */ - grp = cl->grp; + qfq_activate_class(q, cl, qdisc_pkt_len(skb)); + + return err; +} + +/* + * Handle class switch from idle to backlogged. + */ +static void qfq_activate_class(struct qfq_sched *q, struct qfq_class *cl, + unsigned int pkt_len) +{ + struct qfq_group *grp = cl->grp; + u64 roundedS; + int s; + qfq_update_start(q, cl); /* compute new finish time and rounded start. */ - cl->F = cl->S + (u64)qdisc_pkt_len(skb) * cl->inv_w; + cl->F = cl->S + (u64)pkt_len * cl->inv_w; roundedS = qfq_round_down(cl->S, grp->slot_shift); /* @@ -917,8 +962,6 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) skip_update: qfq_slot_insert(grp, cl, roundedS); - - return err; } From 155e4e12b9f49c2dc817bb4c44e9416c46833c3d Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 7 Aug 2012 08:32:34 +0000 Subject: [PATCH 0337/1098] batman-adv: Fix mem leak in the batadv_tt_local_event() function Memory is allocated for 'tt_change_node' with kmalloc(). 'tt_change_node' may go out of scope really being used for anything (except have a few members initialized) if we hit the 'del:' label. This patch makes sure we free the memory in that case. Signed-off-by: Jesper Juhl Acked-by: Antonio Quartulli Signed-off-by: David S. Miller --- net/batman-adv/translation-table.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index a438f4b582fc..99dd8f75b3ff 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -197,6 +197,7 @@ static void batadv_tt_local_event(struct batadv_priv *bat_priv, del: list_del(&entry->list); kfree(entry); + kfree(tt_change_node); event_removed = true; goto unlock; } From 47dffc7547ed3b105dabd570ed864347687beac2 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 7 Aug 2012 11:56:26 +0000 Subject: [PATCH 0338/1098] cdc-phonet: Don't leak in usbpn_open MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We allocate memory for 'req' with usb_alloc_urb() and then test 'if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD))'. If we enter that branch due to '!req' then there is no problem. But if we enter the branch due to 'req' being != 0 and the 'rx_submit()' call being false, then we'll leak the memory we allocated. Deal with the leak by always calling 'usb_free_urb(req)' when entering the branch. If 'req' happens to be 0 then the call is harmless, if it is not 0 then we free the memory we allocated but don't need. Signed-off-by: Jesper Juhl Acked-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- drivers/net/usb/cdc-phonet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 64610048ce87..7d78669000d7 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -232,6 +232,7 @@ static int usbpn_open(struct net_device *dev) struct urb *req = usb_alloc_urb(0, GFP_KERNEL); if (!req || rx_submit(pnd, req, GFP_KERNEL | __GFP_COLD)) { + usb_free_urb(req); usbpn_close(dev); return -ENOMEM; } From 7364e445f62825758fa61195d237a5b8ecdd06ec Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 00:33:25 +0000 Subject: [PATCH 0339/1098] net/core: Fix potential memory leak in dev_set_alias() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- net/core/dev.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index f91abf800161..a39354ee1432 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1055,6 +1055,8 @@ rollback: */ int dev_set_alias(struct net_device *dev, const char *alias, size_t len) { + char *new_ifalias; + ASSERT_RTNL(); if (len >= IFALIASZ) @@ -1068,9 +1070,10 @@ int dev_set_alias(struct net_device *dev, const char *alias, size_t len) return 0; } - dev->ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL); - if (!dev->ifalias) + new_ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL); + if (!new_ifalias) return -ENOMEM; + dev->ifalias = new_ifalias; strlcpy(dev->ifalias, alias, len+1); return len; From 3a32aea6e01b10a462763e0b0e00805f387ca010 Mon Sep 17 00:00:00 2001 From: "stigge@antcom.de" Date: Wed, 8 Aug 2012 03:18:54 +0000 Subject: [PATCH 0340/1098] lpc_eth: remove obsolete ifdefs The #ifdefs regarding CONFIG_ARCH_LPC32XX_MII_SUPPORT and CONFIG_ARCH_LPC32XX_IRAM_FOR_NET are obsolete since the symbols have been removed from Kconfig and replaced by devicetree based configuration. Signed-off-by: Roland Stigge Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 4069edab229e..53743f7a2ca9 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -346,28 +346,15 @@ static phy_interface_t lpc_phy_interface_mode(struct device *dev) "phy-mode", NULL); if (mode && !strcmp(mode, "mii")) return PHY_INTERFACE_MODE_MII; - return PHY_INTERFACE_MODE_RMII; } - - /* non-DT */ -#ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT - return PHY_INTERFACE_MODE_MII; -#else return PHY_INTERFACE_MODE_RMII; -#endif } static bool use_iram_for_net(struct device *dev) { if (dev && dev->of_node) return of_property_read_bool(dev->of_node, "use-iram"); - - /* non-DT */ -#ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET - return true; -#else return false; -#endif } /* Receive Status information word */ From f5addb91d14e63beb6224a62fb81b6e610cee3bc Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 8 Aug 2012 04:47:24 +0000 Subject: [PATCH 0341/1098] net/stmmac: mark probe function as __devinit Driver probe functions are generally __devinit so they will be discarded after initialization for non-hotplug kernels. This was found by a new warning after patch 6a228452d "stmmac: Add device-tree support" adds a new __devinit function that is called from stmmac_pltfr_probe. Without this patch, building socfpga_defconfig results in: WARNING: drivers/net/ethernet/stmicro/stmmac/stmmac.o(.text+0x5d4c): Section mismatch in reference from the function stmmac_pltfr_probe() to the function .devinit.text:stmmac_probe_config_dt() The function stmmac_pltfr_probe() references the function __devinit stmmac_probe_config_dt(). This is often because stmmac_pltfr_probe lacks a __devinit annotation or the annotation of stmmac_probe_config_dt is wrong. Signed-off-by: Arnd Bergmann Cc: Stefan Roese Cc: Giuseppe Cavallaro Cc: David S. Miller Cc: netdev@vger.kernel.org Acked-by: Stefan Roese Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index cd01ee7ecef1..b93245c11995 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -74,7 +74,7 @@ static int __devinit stmmac_probe_config_dt(struct platform_device *pdev, * the necessary resources and invokes the main to init * the net device, register the mdio bus etc. */ -static int stmmac_pltfr_probe(struct platform_device *pdev) +static int __devinit stmmac_pltfr_probe(struct platform_device *pdev) { int ret = 0; struct resource *res; From 0f457e488c79922dfd646f94ed058764f7ba758c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sun, 29 Jul 2012 16:24:57 +0200 Subject: [PATCH 0342/1098] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marek Olšák Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_cs.c | 6 ++++-- drivers/gpu/drm/radeon/evergreend.h | 2 ++ drivers/gpu/drm/radeon/r600_cs.c | 6 ++++-- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index c16554122ccd..f2e5c545c973 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -961,13 +961,15 @@ static int evergreen_cs_track_check(struct radeon_cs_parser *p) if (track->db_dirty) { /* Check stencil buffer */ - if (G_028800_STENCIL_ENABLE(track->db_depth_control)) { + if (G_028044_FORMAT(track->db_s_info) != V_028044_STENCIL_INVALID && + G_028800_STENCIL_ENABLE(track->db_depth_control)) { r = evergreen_cs_track_validate_stencil(p); if (r) return r; } /* Check depth buffer */ - if (G_028800_Z_ENABLE(track->db_depth_control)) { + if (G_028040_FORMAT(track->db_z_info) != V_028040_Z_INVALID && + G_028800_Z_ENABLE(track->db_depth_control)) { r = evergreen_cs_track_validate_depth(p); if (r) return r; diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index d3bd098e4e19..79347855d9bf 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1277,6 +1277,8 @@ #define S_028044_FORMAT(x) (((x) & 0x1) << 0) #define G_028044_FORMAT(x) (((x) >> 0) & 0x1) #define C_028044_FORMAT 0xFFFFFFFE +#define V_028044_STENCIL_INVALID 0 +#define V_028044_STENCIL_8 1 #define G_028044_TILE_SPLIT(x) (((x) >> 8) & 0x7) #define DB_Z_READ_BASE 0x28048 #define DB_STENCIL_READ_BASE 0x2804c diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index ca87f7afaf23..1119e31e5c2f 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -764,8 +764,10 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) } /* Check depth buffer */ - if (track->db_dirty && (G_028800_STENCIL_ENABLE(track->db_depth_control) || - G_028800_Z_ENABLE(track->db_depth_control))) { + if (track->db_dirty && + G_028010_FORMAT(track->db_depth_info) != V_028010_DEPTH_INVALID && + (G_028800_STENCIL_ENABLE(track->db_depth_control) || + G_028800_Z_ENABLE(track->db_depth_control))) { r = r600_cs_track_validate_db(p); if (r) return r; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dcea6f01ae4e..4b736ecb0aa5 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -59,9 +59,10 @@ * 2.15.0 - add max_pipes query * 2.16.0 - fix evergreen 2D tiled surface calculation * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx + * 2.18.0 - r600-eg: allow "invalid" DB formats */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 17 +#define KMS_DRIVER_MINOR 18 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); From 959f724728b6a1cb5185230972119dd7bc8b610e Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 7 Aug 2012 06:57:25 +0000 Subject: [PATCH 0343/1098] drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c index 7bd65bdd15a8..291ecc145585 100644 --- a/drivers/gpu/drm/udl/udl_gem.c +++ b/drivers/gpu/drm/udl/udl_gem.c @@ -308,7 +308,7 @@ struct drm_gem_object *udl_gem_prime_import(struct drm_device *dev, /* need to attach */ attach = dma_buf_attach(dma_buf, dev->dev); if (IS_ERR(attach)) - return ERR_PTR(PTR_ERR(attach)); + return ERR_CAST(attach); sg = dma_buf_map_attachment(attach, DMA_BIDIRECTIONAL); if (IS_ERR(sg)) { From 800fb3ddee2c50918d651fbd70515f1e38857305 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 4 Aug 2012 21:54:05 -0400 Subject: [PATCH 0344/1098] sh: dma: fix request_irq usage When calling request_irq with IRQF_SHARED, the dev cookie must be set (i.e. non-NULL), otherwise the code rejects it immediately with -EINVAL. So restore the logic here where we'd pass a pointer to the name as a dummy unique val. Otherwise, booting up on my LANDISK system would fail with: DMAC Address Error0 request_irq fail This was introduced in commit 7f47c7189b3e8f19a589f77a3ad169d7b691b582. Signed-off-by: Mike Frysinger Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 4c171f13b0e8..b22565623142 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -335,7 +335,7 @@ static int dmae_irq_init(void) for (n = 0; n < NR_DMAE; n++) { int i = request_irq(get_dma_error_irq(n), dma_err, - IRQF_SHARED, dmae_name[n], NULL); + IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]); if (unlikely(i < 0)) { printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); return i; From d0b464d67001d202e59f7e60a30074c4d74021aa Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 7 Aug 2012 08:10:40 +0100 Subject: [PATCH 0345/1098] sh: sh7269: Fix LCD pinmux There are two ports that can output the LCD data, therefore they have to use separate pimux identifiers so we can select the one we want to use. Signed-off-by: Phil Edworthy Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2a/cpu/sh7269.h | 36 +++-- arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 195 ++++++++++++++---------- 2 files changed, 141 insertions(+), 90 deletions(-) diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 48d14498e774..2a0ca8780f0d 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -183,18 +183,30 @@ enum { GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0, GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK, GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE, - GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22, - GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20, - GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18, - GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16, - GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14, - GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12, - GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10, - GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8, - GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6, - GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4, - GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2, - GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0, + GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22, + GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20, + GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18, + GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16, + GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14, + GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12, + GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10, + GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8, + GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6, + GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4, + GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2, + GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0, + GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22, + GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20, + GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18, + GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16, + GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14, + GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12, + GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10, + GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8, + GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6, + GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4, + GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2, + GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0, GPIO_FN_LCD_M_DISP, }; diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c index f25127c46eca..039e4587dd9b 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c @@ -758,12 +758,22 @@ enum { DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK, LCD_CLK_MARK, LCD_EXTCLK_MARK, LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK, - LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK, - LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK, - LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK, - LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK, - LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK, - LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK, + LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK, + LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK, + LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK, + LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK, + LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK, + LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK, + LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK, + LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK, + LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK, + LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK, + LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK, + LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK, + LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK, + LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK, + LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK, + LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK, LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK, LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK, LCD_M_DISP_MARK, @@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PF1_DATA, PF1MD_000), PINMUX_DATA(BACK_MARK, PF1MD_001), + PINMUX_DATA(SSL10_MARK, PF1MD_011), PINMUX_DATA(TIOC4B_MARK, PF1MD_100), PINMUX_DATA(DACK0_MARK, PF1MD_101), @@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PG27_DATA, PG27MD_00), PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10), PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11), + PINMUX_DATA(LCD_DE_MARK, PG27MD_11), PINMUX_DATA(PG26_DATA, PG26MD_00), PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10), + PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10), PINMUX_DATA(PG25_DATA, PG25MD_00), PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10), + PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10), PINMUX_DATA(PG24_DATA, PG24MD_00), PINMUX_DATA(LCD_CLK_MARK, PG24MD_10), PINMUX_DATA(PG23_DATA, PG23MD_000), - PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010), + PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011), PINMUX_DATA(TXD5_MARK, PG23MD_100), PINMUX_DATA(PG22_DATA, PG22MD_000), - PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010), + PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011), PINMUX_DATA(RXD5_MARK, PG22MD_100), PINMUX_DATA(PG21_DATA, PG21MD_000), PINMUX_DATA(DV_DATA7_MARK, PG21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011), PINMUX_DATA(TXD4_MARK, PG21MD_100), PINMUX_DATA(PG20_DATA, PG20MD_000), PINMUX_DATA(DV_DATA6_MARK, PG20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011), PINMUX_DATA(RXD4_MARK, PG20MD_100), PINMUX_DATA(PG19_DATA, PG19MD_000), PINMUX_DATA(DV_DATA5_MARK, PG19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010), + PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010), PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011), PINMUX_DATA(SCK5_MARK, PG19MD_100), PINMUX_DATA(PG18_DATA, PG18MD_000), PINMUX_DATA(DV_DATA4_MARK, PG18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010), + PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010), PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011), PINMUX_DATA(SCK4_MARK, PG18MD_100), @@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = { // we're going with 2 bits PINMUX_DATA(PG17_DATA, PG17MD_00), PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01), - PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10), + PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10), // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description // we're going with 2 bits PINMUX_DATA(PG16_DATA, PG16MD_00), PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01), - PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10), + PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10), PINMUX_DATA(PG15_DATA, PG15MD_00), PINMUX_DATA(D31_MARK, PG15MD_01), - PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10), + PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10), PINMUX_DATA(PINT7_PG_MARK, PG15MD_11), PINMUX_DATA(PG14_DATA, PG14MD_00), PINMUX_DATA(D30_MARK, PG14MD_01), - PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10), + PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10), PINMUX_DATA(PINT6_PG_MARK, PG14MD_11), PINMUX_DATA(PG13_DATA, PG13MD_00), PINMUX_DATA(D29_MARK, PG13MD_01), - PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10), + PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10), PINMUX_DATA(PINT5_PG_MARK, PG13MD_11), PINMUX_DATA(PG12_DATA, PG12MD_00), PINMUX_DATA(D28_MARK, PG12MD_01), - PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10), + PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10), PINMUX_DATA(PINT4_PG_MARK, PG12MD_11), PINMUX_DATA(PG11_DATA, PG11MD_000), PINMUX_DATA(D27_MARK, PG11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010), + PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010), PINMUX_DATA(PINT3_PG_MARK, PG11MD_011), PINMUX_DATA(TIOC3D_MARK, PG11MD_100), PINMUX_DATA(PG10_DATA, PG10MD_000), PINMUX_DATA(D26_MARK, PG10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010), + PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010), PINMUX_DATA(PINT2_PG_MARK, PG10MD_011), PINMUX_DATA(TIOC3C_MARK, PG10MD_100), PINMUX_DATA(PG9_DATA, PG9MD_000), PINMUX_DATA(D25_MARK, PG9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010), + PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010), PINMUX_DATA(PINT1_PG_MARK, PG9MD_011), PINMUX_DATA(TIOC3B_MARK, PG9MD_100), PINMUX_DATA(PG8_DATA, PG8MD_000), PINMUX_DATA(D24_MARK, PG8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010), + PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010), PINMUX_DATA(PINT0_PG_MARK, PG8MD_011), PINMUX_DATA(TIOC3A_MARK, PG8MD_100), PINMUX_DATA(PG7_DATA, PG7MD_000), PINMUX_DATA(D23_MARK, PG7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010), + PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010), PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011), PINMUX_DATA(TIOC2B_MARK, PG7MD_100), PINMUX_DATA(PG6_DATA, PG6MD_000), PINMUX_DATA(D22_MARK, PG6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010), + PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010), PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011), PINMUX_DATA(TIOC2A_MARK, PG6MD_100), PINMUX_DATA(PG5_DATA, PG5MD_000), PINMUX_DATA(D21_MARK, PG5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010), + PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010), PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011), PINMUX_DATA(TIOC1B_MARK, PG5MD_100), PINMUX_DATA(PG4_DATA, PG4MD_000), PINMUX_DATA(D20_MARK, PG4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010), + PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010), PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011), PINMUX_DATA(TIOC1A_MARK, PG4MD_100), PINMUX_DATA(PG3_DATA, PG3MD_000), PINMUX_DATA(D19_MARK, PG3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010), + PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010), PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011), PINMUX_DATA(TIOC0D_MARK, PG3MD_100), PINMUX_DATA(PG2_DATA, PG2MD_000), PINMUX_DATA(D18_MARK, PG2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010), + PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010), PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011), PINMUX_DATA(TIOC0C_MARK, PG2MD_100), PINMUX_DATA(PG1_DATA, PG1MD_000), PINMUX_DATA(D17_MARK, PG1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010), + PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010), PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011), PINMUX_DATA(TIOC0B_MARK, PG1MD_100), PINMUX_DATA(PG0_DATA, PG0MD_000), PINMUX_DATA(D16_MARK, PG0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010), + PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010), PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011), PINMUX_DATA(TIOC0A_MARK, PG0MD_100), @@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ23_DATA, PJ23MD_000), PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001), - PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010), + PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), PINMUX_DATA(CTX1_MARK, PJ23MD_101), PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), - PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010), + PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), PINMUX_DATA(CRX1_MARK, PJ22MD_101), @@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010), + PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), PINMUX_DATA(CTX2_MARK, PJ21MD_101), PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010), + PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), PINMUX_DATA(CRX2_MARK, PJ20MD_101), @@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010), + PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010), PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011), PINMUX_DATA(TIOC0D_MARK, PJ19MD_100), PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101), @@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ18_DATA, PJ18MD_000), PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010), + PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010), PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011), PINMUX_DATA(TIOC0C_MARK, PJ18MD_100), PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101), PINMUX_DATA(PJ17_DATA, PJ17MD_000), PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001), - PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010), + PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010), PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011), PINMUX_DATA(TIOC0B_MARK, PJ17MD_100), PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101), PINMUX_DATA(PJ16_DATA, PJ16MD_000), PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001), - PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010), + PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010), PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011), PINMUX_DATA(TIOC0A_MARK, PJ16MD_100), PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101), PINMUX_DATA(PJ15_DATA, PJ15MD_000), PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001), - PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010), + PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010), PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011), PINMUX_DATA(PWM2H_MARK, PJ15MD_100), PINMUX_DATA(TXD7_MARK, PJ15MD_101), PINMUX_DATA(PJ14_DATA, PJ14MD_000), PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001), - PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010), + PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010), PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011), PINMUX_DATA(PWM2G_MARK, PJ14MD_100), PINMUX_DATA(TXD6_MARK, PJ14MD_101), PINMUX_DATA(PJ13_DATA, PJ13MD_000), PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001), - PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010), + PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010), PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011), PINMUX_DATA(PWM2F_MARK, PJ13MD_100), PINMUX_DATA(TXD5_MARK, PJ13MD_101), PINMUX_DATA(PJ12_DATA, PJ12MD_000), PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001), - PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010), + PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010), PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011), PINMUX_DATA(PWM2E_MARK, PJ12MD_100), PINMUX_DATA(SCK7_MARK, PJ12MD_101), PINMUX_DATA(PJ11_DATA, PJ11MD_000), PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010), + PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010), PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011), PINMUX_DATA(PWM2D_MARK, PJ11MD_100), PINMUX_DATA(SCK6_MARK, PJ11MD_101), PINMUX_DATA(PJ10_DATA, PJ10MD_000), PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010), + PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010), PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011), PINMUX_DATA(PWM2C_MARK, PJ10MD_100), PINMUX_DATA(SCK5_MARK, PJ10MD_101), PINMUX_DATA(PJ9_DATA, PJ9MD_000), PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010), + PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010), PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011), PINMUX_DATA(PWM2B_MARK, PJ9MD_100), PINMUX_DATA(RTS5_MARK, PJ9MD_101), PINMUX_DATA(PJ8_DATA, PJ8MD_000), PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010), + PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010), PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011), PINMUX_DATA(PWM2A_MARK, PJ8MD_100), PINMUX_DATA(CTS5_MARK, PJ8MD_101), PINMUX_DATA(PJ7_DATA, PJ7MD_000), PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010), + PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010), PINMUX_DATA(SD_D2_MARK, PJ7MD_011), PINMUX_DATA(PWM1H_MARK, PJ7MD_100), PINMUX_DATA(PJ6_DATA, PJ6MD_000), PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010), + PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010), PINMUX_DATA(SD_D3_MARK, PJ6MD_011), PINMUX_DATA(PWM1G_MARK, PJ6MD_100), PINMUX_DATA(PJ5_DATA, PJ5MD_000), PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010), + PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010), PINMUX_DATA(SD_CMD_MARK, PJ5MD_011), PINMUX_DATA(PWM1F_MARK, PJ5MD_100), PINMUX_DATA(PJ4_DATA, PJ4MD_000), PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010), + PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010), PINMUX_DATA(SD_CLK_MARK, PJ4MD_011), PINMUX_DATA(PWM1E_MARK, PJ4MD_100), PINMUX_DATA(PJ3_DATA, PJ3MD_000), PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010), + PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010), PINMUX_DATA(SD_D0_MARK, PJ3MD_011), PINMUX_DATA(PWM1D_MARK, PJ3MD_100), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010), + PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010), PINMUX_DATA(SD_D1_MARK, PJ2MD_011), PINMUX_DATA(PWM1C_MARK, PJ2MD_100), PINMUX_DATA(PJ1_DATA, PJ1MD_000), PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010), + PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010), PINMUX_DATA(SD_WP_MARK, PJ1MD_011), PINMUX_DATA(PWM1B_MARK, PJ1MD_100), PINMUX_DATA(PJ0_DATA, PJ0MD_000), PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010), + PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010), PINMUX_DATA(SD_CD_MARK, PJ0MD_011), PINMUX_DATA(PWM1A_MARK, PJ0MD_100), }; @@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK), PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK), + + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK), PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK), }; From 1026023705b0baa2b37df2a0d1da0022fc7b985e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 9 Aug 2012 12:59:40 +0900 Subject: [PATCH 0346/1098] sh: intc: Handle domain association for sparseirq pre-allocated vectors. Presently it's assumed that the irqdomain code handles the irq_desc allocation for us, but this isn't necessarily the case when we've pre-allocated IRQs via sparseirq. Previously we had a -EEXIST check in the code that attempted to trap these cases and simply update them in-place, but this behaviour was inadvertently lost in the transition to irqdomains. This simply restores the previous behaviour, first attempting to let the irqdomain core fetch the allocation for us, and falling back to an in-place domain association in the extant IRQ case. Fixes up regressions on platforms that pre-allocate legacy IRQs (specifically ARM-based SH-Mobile platforms, as SH stopped pre-allocating vectors some time ago). Reported-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/intc/core.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index 2374468615ed..32c26d795ed0 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -324,8 +324,16 @@ int __init register_intc_controller(struct intc_desc *desc) res = irq_create_identity_mapping(d->domain, irq); if (unlikely(res)) { - pr_err("can't get irq_desc for %d\n", irq); - continue; + if (res == -EEXIST) { + res = irq_domain_associate(d->domain, irq, irq); + if (unlikely(res)) { + pr_err("domain association failure\n"); + continue; + } + } else { + pr_err("can't identity map IRQ %d\n", irq); + continue; + } } intc_irq_xlate_set(irq, vect->enum_id, d); @@ -345,8 +353,19 @@ int __init register_intc_controller(struct intc_desc *desc) */ res = irq_create_identity_mapping(d->domain, irq2); if (unlikely(res)) { - pr_err("can't get irq_desc for %d\n", irq2); - continue; + if (res == -EEXIST) { + res = irq_domain_associate(d->domain, + irq, irq); + if (unlikely(res)) { + pr_err("domain association " + "failure\n"); + continue; + } + } else { + pr_err("can't identity map IRQ %d\n", + irq); + continue; + } } vect2->enum_id = 0; From 39f78e70567a07a6fc0d7a4ca9e3331e44dd400d Mon Sep 17 00:00:00 2001 From: Chris Brand Date: Tue, 7 Aug 2012 14:01:14 +0200 Subject: [PATCH 0347/1098] ARM: mm: fix MMU mapping of CMA regions Fix dma_contiguous_remap() so that it continues through all the regions, even after encountering one that is outside lowmem. Without this change, if you have two CMA regions, the first outside lowmem and the seocnd inside lowmem, only the second one will get set up in the MMU. Data written to that region then doesn't get automatically flushed from the cache into memory. Signed-off-by: Chris Brand [extended patch subject with 'fix' word] Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f75..334dd79ad5e6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); From e4ea6918c93b9f59d34e8ca2124b2b64b1afe73b Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 7 Aug 2012 14:39:25 +0200 Subject: [PATCH 0348/1098] ARM: dma-mapping: fix atomic allocation alignment The alignment mask is calculated incorrectly. Fixing the calculation makes strange hangs/lockups disappear during the boot with Amstrad E3 and 3.6-rc1 kernel. Signed-off-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 334dd79ad5e6..4bdeccd24d93 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; From d9e0d149b5dcc2ef4688afc572b9906bcda941ef Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 7 Aug 2012 14:44:05 +0200 Subject: [PATCH 0349/1098] ARM: dma-mapping: fix incorrect freeing of atomic allocations Commit e9da6e9905e639b0f842a244bc770b48ad0523e9 (ARM: dma-mapping: remove custom consistent dma region) changed the way atomic allocations are handled. However, arm_dma_free() was not modified accordingly, and as a result freeing of atomic allocations does not work correctly when CMA is disabled. Memory is leaked and following WARNINGs are seen: [ 57.698911] ------------[ cut here ]------------ [ 57.753518] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4() [ 57.811473] trying to free invalid coherent area: e0848000 [ 57.867398] Modules linked in: sata_mv(-) [ 57.921373] [] (unwind_backtrace+0x0/0xf0) from [] (warn_slowpath_common+0x50/0x68) [ 58.033924] [] (warn_slowpath_common+0x50/0x68) from [] (warn_slowpath_fmt+0x30/0x40) [ 58.152024] [] (warn_slowpath_fmt+0x30/0x40) from [] (arm_dma_free+0x88/0xe4) [ 58.219592] [] (arm_dma_free+0x88/0xe4) from [] (dma_pool_destroy+0x100/0x148) [ 58.345526] [] (dma_pool_destroy+0x100/0x148) from [] (release_nodes+0x144/0x218) [ 58.475782] [] (release_nodes+0x144/0x218) from [] (__device_release_driver+0x60/0xb8) [ 58.614260] [] (__device_release_driver+0x60/0xb8) from [] (driver_detach+0xd8/0xec) [ 58.756527] [] (driver_detach+0xd8/0xec) from [] (bus_remove_driver+0x7c/0xc4) [ 58.901648] [] (bus_remove_driver+0x7c/0xc4) from [] (sys_delete_module+0x19c/0x220) [ 59.051447] [] (sys_delete_module+0x19c/0x220) from [] (ret_fast_syscall+0x0/0x2c) [ 59.207996] ---[ end trace 0745420412c0325a ]--- [ 59.287110] ------------[ cut here ]------------ [ 59.366324] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4() [ 59.450511] trying to free invalid coherent area: e0847000 [ 59.534357] Modules linked in: sata_mv(-) [ 59.616785] [] (unwind_backtrace+0x0/0xf0) from [] (warn_slowpath_common+0x50/0x68) [ 59.790030] [] (warn_slowpath_common+0x50/0x68) from [] (warn_slowpath_fmt+0x30/0x40) [ 59.972322] [] (warn_slowpath_fmt+0x30/0x40) from [] (arm_dma_free+0x88/0xe4) [ 60.070701] [] (arm_dma_free+0x88/0xe4) from [] (dma_pool_destroy+0x100/0x148) [ 60.256817] [] (dma_pool_destroy+0x100/0x148) from [] (release_nodes+0x144/0x218) [ 60.445201] [] (release_nodes+0x144/0x218) from [] (__device_release_driver+0x60/0xb8) [ 60.634148] [] (__device_release_driver+0x60/0xb8) from [] (driver_detach+0xd8/0xec) [ 60.823623] [] (driver_detach+0xd8/0xec) from [] (bus_remove_driver+0x7c/0xc4) [ 61.013268] [] (bus_remove_driver+0x7c/0xc4) from [] (sys_delete_module+0x19c/0x220) [ 61.203472] [] (sys_delete_module+0x19c/0x220) from [] (ret_fast_syscall+0x0/0x2c) [ 61.393390] ---[ end trace 0745420412c0325b ]--- The patch fixes this. Signed-off-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4bdeccd24d93..4e7d1182e8a3 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ From 94c142a160d63edac0e1fca7848960dcf75dd2a9 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 9 Aug 2012 10:56:12 +0200 Subject: [PATCH 0350/1098] ALSA: hda - Fix pop noise in headphones on S3 for Asus X55A, X55V To turn off pin control for the pin was tested, and helped against this issue. BugLink: https://bugs.launchpad.net/bugs/1034779 Tested-by: Chih-Hsyuan Ho Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 80d90cb42853..430771776915 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -1752,6 +1752,14 @@ static int via_suspend(struct hda_codec *codec) { struct via_spec *spec = codec->spec; vt1708_stop_hp_work(spec); + + if (spec->codec_type == VT1802) { + /* Fix pop noise on headphones */ + int i; + for (i = 0; i < spec->autocfg.hp_outs; i++) + snd_hda_set_pin_ctl(codec, spec->autocfg.hp_pins[i], 0); + } + return 0; } #endif From 36471012e2ae28ca3178f84d4687a2d88a36593e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Aug 2012 11:19:13 +0200 Subject: [PATCH 0351/1098] tcp: must free metrics at net dismantle We currently leak all tcp metrics at struct net dismantle time. tcp_net_metrics_exit() frees the hash table, we must first iterate it to free all metrics. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_metrics.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c index 2288a6399e1e..0abe67bb4d3a 100644 --- a/net/ipv4/tcp_metrics.c +++ b/net/ipv4/tcp_metrics.c @@ -731,6 +731,18 @@ static int __net_init tcp_net_metrics_init(struct net *net) static void __net_exit tcp_net_metrics_exit(struct net *net) { + unsigned int i; + + for (i = 0; i < (1U << net->ipv4.tcp_metrics_hash_log) ; i++) { + struct tcp_metrics_block *tm, *next; + + tm = rcu_dereference_protected(net->ipv4.tcp_metrics_hash[i].chain, 1); + while (tm) { + next = rcu_dereference_protected(tm->tcpm_next, 1); + kfree(tm); + tm = next; + } + } kfree(net->ipv4.tcp_metrics_hash); } From b669588abaceb5c6d70699b6c009e5cedc42449b Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Sat, 28 Jul 2012 05:07:48 +0000 Subject: [PATCH 0352/1098] igb: fix panic while dumping packets on Tx hang with IOMMU This patch resolves a "BUG: unable to handle kernel paging request at ..." oops while dumping packet data. The issue occurs with IOMMU enabled due to the address provided by phys_to_virt(). This patch avoids phys_to_virt() by making using skb->data and the address of the pages allocated for Rx. Signed-off-by: Emil Tantilov Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_main.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index b7c2d5050572..48cc4fb1a307 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -462,10 +462,10 @@ static void igb_dump(struct igb_adapter *adapter) (u64)buffer_info->time_stamp, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), + 16, 1, buffer_info->skb->data, buffer_info->length, true); } } @@ -547,18 +547,17 @@ rx_ring_summary: (u64)buffer_info->dma, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter)) { + if (netif_msg_pktdata(adapter) && + buffer_info->dma && buffer_info->skb) { print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, - 16, 1, - phys_to_virt(buffer_info->dma), - IGB_RX_HDR_LEN, true); + DUMP_PREFIX_ADDRESS, + 16, 1, buffer_info->skb->data, + IGB_RX_HDR_LEN, true); print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt( - buffer_info->page_dma + - buffer_info->page_offset), + page_address(buffer_info->page) + + buffer_info->page_offset, PAGE_SIZE/2, true); } } From f0c5dadff3fbda77a65b8577fee437c3d771233d Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Wed, 1 Aug 2012 08:12:21 +0000 Subject: [PATCH 0353/1098] e1000e: fix panic while dumping packets on Tx hang with IOMMU This patch resolves a "BUG: unable to handle kernel paging request at ..." oops while dumping packet data. The issue occurs with IOMMU enabled due to the address provided by phys_to_virt(). This patch avoids phys_to_virt() by using skb->data and the address of the pages allocated for Rx. Signed-off-by: Emil Tantilov Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/e1000e/netdev.c | 36 ++++++++++++++++------ 1 file changed, 26 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 95b245310f17..46c3b1f9ff89 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -178,6 +178,24 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]); } +static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, + struct e1000_buffer *bi) +{ + int i; + struct e1000_ps_page *ps_page; + + for (i = 0; i < adapter->rx_ps_pages; i++) { + ps_page = &bi->ps_pages[i]; + + if (ps_page->page) { + pr_info("packet dump for ps_page %d:\n", i); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, + 16, 1, page_address(ps_page->page), + PAGE_SIZE, true); + } + } +} + /* * e1000e_dump - Print registers, Tx-ring and Rx-ring */ @@ -299,10 +317,10 @@ static void e1000e_dump(struct e1000_adapter *adapter) (unsigned long long)buffer_info->time_stamp, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) + if (netif_msg_pktdata(adapter) && buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - buffer_info->length, true); + 16, 1, buffer_info->skb->data, + buffer_info->skb->len, true); } /* Print Rx Ring Summary */ @@ -381,10 +399,8 @@ rx_ring_summary: buffer_info->skb, next_desc); if (netif_msg_pktdata(adapter)) - print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt(buffer_info->dma), - adapter->rx_ps_bsize0, true); + e1000e_dump_ps_pages(adapter, + buffer_info); } } break; @@ -444,12 +460,12 @@ rx_ring_summary: (unsigned long long)buffer_info->dma, buffer_info->skb, next_desc); - if (netif_msg_pktdata(adapter)) + if (netif_msg_pktdata(adapter) && + buffer_info->skb) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 1, - phys_to_virt - (buffer_info->dma), + buffer_info->skb->data, adapter->rx_buffer_len, true); } From a2d6a1d5a435b051d3660961d5dee5b33b15f754 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 8 Aug 2012 05:18:04 +0000 Subject: [PATCH 0354/1098] igb: Fix register defines for all non-82575 hardware It looks like the register defines for DCA were never updated after going from 82575 to 82576. This change addresses that by updating the defines. Signed-off-by: Alexander Duyck Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/e1000_regs.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 10efcd88dca0..28394bea5253 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -156,8 +156,12 @@ : (0x0E018 + ((_n) * 0x40))) #define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \ : (0x0E028 + ((_n) * 0x40))) -#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8)) -#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8)) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) #define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \ : (0x0E038 + ((_n) * 0x40))) #define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \ From e76ab829cc2d8b6350a3f01fffb208df4d7d8c1b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 8 Aug 2012 15:51:44 +0100 Subject: [PATCH 0355/1098] regulator: twl: Remove references to the twl4030 regulator It's not referenced anywhere any more and the compiler notices. Signed-off-by: Mark Brown --- drivers/regulator/twl-regulator.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 242fe90dc565..30cb62289b74 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1048,7 +1048,6 @@ TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 0); TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 0); TWL6030_FIXED_LDO(V1V8, 0x16, 1800, 0); TWL6030_FIXED_LDO(V2V1, 0x1c, 2100, 0); -TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 0); TWL6025_ADJUSTABLE_SMPS(SMPS3, 0x34); TWL6025_ADJUSTABLE_SMPS(SMPS4, 0x10); TWL6025_ADJUSTABLE_SMPS(VIO, 0x16); From 0d624275720a4b01217693eb80d967a0d5f1f3a3 Mon Sep 17 00:00:00 2001 From: Vaibhav Bedia Date: Wed, 8 Aug 2012 20:40:31 +0530 Subject: [PATCH 0356/1098] ASoC: Davinci: McASP: Flush the FIFO before enabling FIFO should be flushed before it is enabled for the first time. This fixes the I/O errors reported by the ASoC core on a fresh boot Signed-off-by: Vaibhav Bedia Signed-off-by: Hebbar, Gururaja Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-mcasp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 95441bfc8190..ce5e5cd254dd 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -380,14 +380,20 @@ static void mcasp_start_tx(struct davinci_audio_dev *dev) static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream) { if (stream == SNDRV_PCM_STREAM_PLAYBACK) { - if (dev->txnumevt) /* enable FIFO */ + if (dev->txnumevt) { /* enable FIFO */ + mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, + FIFO_ENABLE); mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); + } mcasp_start_tx(dev); } else { - if (dev->rxnumevt) /* enable FIFO */ + if (dev->rxnumevt) { /* enable FIFO */ + mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, + FIFO_ENABLE); mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); + } mcasp_start_rx(dev); } } From 8b5eae137b91cb2db15fe2c5a913cafde4629339 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Thu, 9 Aug 2012 18:08:40 -0400 Subject: [PATCH 0357/1098] ASoC: bfin: fix memory leak in sport3 controller driver Signed-off-by: Scott Jiang Signed-off-by: Mark Brown --- sound/soc/blackfin/bf6xx-sport.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/blackfin/bf6xx-sport.c b/sound/soc/blackfin/bf6xx-sport.c index 318c5ba5360f..dfb744381c42 100644 --- a/sound/soc/blackfin/bf6xx-sport.c +++ b/sound/soc/blackfin/bf6xx-sport.c @@ -413,7 +413,14 @@ EXPORT_SYMBOL(sport_create); void sport_delete(struct sport_device *sport) { + if (sport->tx_desc) + dma_free_coherent(NULL, sport->tx_desc_size, + sport->tx_desc, 0); + if (sport->rx_desc) + dma_free_coherent(NULL, sport->rx_desc_size, + sport->rx_desc, 0); sport_free_resource(sport); + kfree(sport); } EXPORT_SYMBOL(sport_delete); From 52c0eee3329b08dfd912a59e0246e21026308301 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Jul 2012 18:23:35 +0100 Subject: [PATCH 0358/1098] ASoC: wm8962: Don't duplicate bias level management in resume The core will bring the bias level up for us since we use idle_bias_off, duplicating this may be harmful. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index aa9ce9dd7d8a..ce6720073798 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3733,21 +3733,6 @@ static int wm8962_runtime_resume(struct device *dev) regcache_sync(wm8962->regmap); - regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP, - WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA, - WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA); - - /* Bias enable at 2*50k for ramp */ - regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1, - WM8962_VMID_SEL_MASK | WM8962_BIAS_ENA, - WM8962_BIAS_ENA | 0x180); - - msleep(5); - - /* VMID back to 2x250k for standby */ - regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1, - WM8962_VMID_SEL_MASK, 0x100); - return 0; } From 798bd59ce94c8218332996e650ded48ded039fe1 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 3 Aug 2012 17:45:21 -0600 Subject: [PATCH 0359/1098] ARM: tegra: more regulator fixes for Harmony Commit 3d55c29 "ARM: tegra: harmony: add regulator supply name and its input supply" was supposed to fix all the problems with regulators on Harmony. However, it appears that I only tested it when booting using board files, not when booting using device tree. This change fixes two problems with regulators when booting using device tree: 1) That patch only created the vdd_sys regulator when booting using a board file. Since this is the root of the whole regulator tree, this caused no regulators to successfully initialize when booting using device tree. The registration of vdd_sys is moved to fix this. 2) When booting use DT, the regulator core sets has_full_constraints, which in turn causes the core to turn off any regulators not marked as always on. Some of the affected regulators are required for basic system operation. To solve this, add always on constraints to all relevant regulators. This doesn't affect booting using a board file since nothing sets has_full_constraints in that case. Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- arch/arm/mach-tegra/board-harmony-power.c | 32 ++++++++++++----------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f0..b7344beec102 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; From 59ee93a528b94ef4e81a08db252b0326feff171f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 5 Aug 2012 14:58:37 +0000 Subject: [PATCH 0360/1098] ARM: pxa: remove irq_to_gpio from ezx-pcap driver The irq_to_gpio function was removed from the pxa platform in linux-3.2, and this driver has been broken since. There is actually no in-tree user of this driver that adds this platform device, but the driver can and does get enabled on some platforms. Without this patch, building ezx_defconfig results in: drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work': drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Arnd Bergmann Acked-by: Haojian Zhuang Cc: stable@vger.kernel.org (v3.2+) Cc: Samuel Ortiz Cc: Daniel Ribeiro --- drivers/mfd/ezx-pcap.c | 2 +- include/linux/mfd/ezx-pcap.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 43a76c41cfcc..db662e2dcfa5 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -202,7 +202,7 @@ static void pcap_isr_work(struct work_struct *work) } local_irq_enable(); ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); - } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); + } while (gpio_get_value(pdata->gpio)); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index 40c372165f3e..32a1b5cfeba1 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -16,6 +16,7 @@ struct pcap_subdev { struct pcap_platform_data { unsigned int irq_base; unsigned int config; + int gpio; void (*init) (void *); /* board specific init */ int num_subdevs; struct pcap_subdev *subdevs; From 4eef6cbfcc03b294d9d334368a851b35b496ce53 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 16:21:37 +0000 Subject: [PATCH 0361/1098] Input: eeti_ts: pass gpio value instead of IRQ The EETI touchscreen asserts its IRQ line as soon as it has data in its internal buffers. The line is automatically deasserted once all data has been read via I2C. Hence, the driver has to monitor the GPIO line and cannot simply rely on the interrupt handler reception. In the current implementation of the driver, irq_to_gpio() is used to determine the GPIO number from the i2c_client's IRQ value. As irq_to_gpio() is not available on all platforms, this patch changes this and makes the driver ignore the passed in IRQ. Instead, a GPIO is added to the platform_data struct and gpio_to_irq is used to derive the IRQ from that GPIO. If this fails, bail out. The driver is only able to work in environments where the touchscreen GPIO can be mapped to an IRQ. Without this patch, building raumfeld_defconfig results in: drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active': drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Daniel Mack Signed-off-by: Arnd Bergmann Cc: stable@vger.kernel.org (v3.2+) Cc: Dmitry Torokhov Cc: Sven Neumann Cc: linux-input@vger.kernel.org Cc: Haojian Zhuang --- arch/arm/mach-pxa/raumfeld.c | 2 +- drivers/input/touchscreen/eeti_ts.c | 21 +++++++++++++-------- include/linux/input/eeti_ts.h | 1 + 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e94..d89d87ae144c 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 503c7096ed36..908407efc672 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -48,7 +48,7 @@ struct eeti_ts_priv { struct input_dev *input; struct work_struct work; struct mutex mutex; - int irq, irq_active_high; + int irq_gpio, irq, irq_active_high; }; #define EETI_TS_BITDEPTH (11) @@ -62,7 +62,7 @@ struct eeti_ts_priv { static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) { - return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; + return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; } static void eeti_ts_read(struct work_struct *work) @@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev) static int __devinit eeti_ts_probe(struct i2c_client *client, const struct i2c_device_id *idp) { - struct eeti_ts_platform_data *pdata; + struct eeti_ts_platform_data *pdata = client->dev.platform_data; struct eeti_ts_priv *priv; struct input_dev *input; unsigned int irq_flags; @@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, priv->client = client; priv->input = input; - priv->irq = client->irq; + priv->irq_gpio = pdata->irq_gpio; + priv->irq = gpio_to_irq(pdata->irq_gpio); - pdata = client->dev.platform_data; + err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); + if (err < 0) + goto err1; if (pdata) priv->irq_active_high = pdata->irq_active_high; @@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, err = input_register_device(input); if (err) - goto err1; + goto err2; err = request_irq(priv->irq, eeti_ts_isr, irq_flags, client->name, priv); if (err) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err2; + goto err3; } /* @@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 0); return 0; -err2: +err3: input_unregister_device(input); input = NULL; /* so we dont try to free it below */ +err2: + gpio_free(pdata->irq_gpio); err1: input_free_device(input); kfree(priv); diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h index f875b316249d..16625d799b6f 100644 --- a/include/linux/input/eeti_ts.h +++ b/include/linux/input/eeti_ts.h @@ -2,6 +2,7 @@ #define LINUX_INPUT_EETI_TS_H struct eeti_ts_platform_data { + int irq_gpio; unsigned int irq_active_high; }; From 9c97738c5d3378e8ee525ff7f9fc160be3c8ed92 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 04:59:34 +0000 Subject: [PATCH 0362/1098] ARM: sa1100: include linux/io.h in hackkit leds code The sa1100 definition of the io_p2v macro has changed in v3.6, and this one file stopped working because of that. Without this patch, building hackkit_defconfig results in: arch/arm/mach-sa1100/leds-hackkit.c: In function 'hackkit_leds_event': arch/arm/mach-sa1100/leds-hackkit.c:39:4: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration] Signed-off-by: Arnd Bergmann Cc: Russell King --- arch/arm/mach-sa1100/leds-hackkit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e62..f8e47235babe 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include +#include #include #include From 35e7906145d6d487002b738271890a7e7936067e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 07:52:19 +0000 Subject: [PATCH 0363/1098] ARM: s3c24xx: use new PWM driver The samsung PWM driver has moved to the new PWM subsystem, which changed the Kconfig symbol for that driver, but the rx1950 and gta02 boards still uses the old one. Without this patch, building s3c2410_defconfig results in: arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power': arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable' arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit': arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init': arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request' Signed-off-by: Arnd Bergmann Reported-by: Tushar Behera Cc: Kukjin Kim --- arch/arm/mach-s3c24xx/Kconfig | 4 ++-- arch/arm/plat-samsung/Kconfig | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b70..d56b0f7f2b20 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1f..9c3b90c3538e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system From b434f5c95d2d9318482fda3af615ebcda7e2c0da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:31:24 +0000 Subject: [PATCH 0364/1098] ARM: integrator: include Without this patch, building integrator_defconfig results in: arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default] arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij Cc: Russell King --- arch/arm/mach-integrator/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf2..3fa6c51390da 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include From a33493775dd141a99bcd2aac9a5b6b7e8385b5a4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:48:12 +0000 Subject: [PATCH 0365/1098] ARM: imx: gpmi-nand depends on mxs-dma It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann Acked-by: Dirk Behme Cc: Shawn Guo Cc: Sascha Hauer --- arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/mtd/nand/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b33..3c9f32f9b6b4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 31bb7e5b504a..8ca417614c57 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) + depends on MTD_NAND && MXS_DMA help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH From 389d7b26d9e4f78b17366c23a3aa16b3c5cb3bde Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 9 Aug 2012 15:19:25 +0200 Subject: [PATCH 0366/1098] bio: Fix potential memory leak in bio_find_or_create_slab() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- fs/bio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 73922abba832..fed1f799cb56 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -73,7 +73,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) { unsigned int sz = sizeof(struct bio) + extra_size; struct kmem_cache *slab = NULL; - struct bio_slab *bslab; + struct bio_slab *bslab, *new_bio_slabs; unsigned int i, entry = -1; mutex_lock(&bio_slab_lock); @@ -97,11 +97,12 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) if (bio_slab_nr == bio_slab_max && entry == -1) { bio_slab_max <<= 1; - bio_slabs = krealloc(bio_slabs, - bio_slab_max * sizeof(struct bio_slab), - GFP_KERNEL); - if (!bio_slabs) + new_bio_slabs = krealloc(bio_slabs, + bio_slab_max * sizeof(struct bio_slab), + GFP_KERNEL); + if (!new_bio_slabs) goto out_unlock; + bio_slabs = new_bio_slabs; } if (entry == -1) entry = bio_slab_nr++; From 276f0f5d157bb4a816053f4f3a941dbcd4f76556 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 9 Aug 2012 15:20:23 +0200 Subject: [PATCH 0367/1098] block: disable discard request merge temporarily The SCSI discard request merge never worked, and looks no solution for in future, let's disable it temporarily. Signed-off-by: Shaohua Li Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index dc632975d54f..4a2ab7c85393 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -601,7 +601,7 @@ static inline void blk_clear_rl_full(struct request_list *rl, bool sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_DISCARD) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ From 15676937e6a7e98d37f4c1eaa0e7b3c111627fce Mon Sep 17 00:00:00 2001 From: Chris Rattray Date: Thu, 9 Aug 2012 10:10:54 +0100 Subject: [PATCH 0368/1098] ASoC: wm8994: Add missing dapm routes for WM8958 rev A Signed-off-by: Chris Rattray Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 04ef03175c51..6c9eeca85b95 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -4038,6 +4038,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) break; case WM8958: if (wm8994->revision < 1) { + snd_soc_dapm_add_routes(dapm, wm8994_intercon, + ARRAY_SIZE(wm8994_intercon)); snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon, ARRAY_SIZE(wm8994_revd_intercon)); snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon, From 8430f9772f9ac305211f177b0fa56a312175da11 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Thu, 9 Aug 2012 15:23:07 +0200 Subject: [PATCH 0369/1098] block: remove plugging at buffered write time Buffered write(2) is not directly tied to IO, so it's not suitable to handle plug in generic_file_aio_write(). Note that plugging for O_SYNC writes is also removed. The user may pass arbitrary @size arguments, which may be much larger than the preferable I/O size, or may cross extent/device boundaries. Let the lower layers handle the plugging. The plugging code here actually turns them into no-ops. CC: Li Shaohua Signed-off-by: Wu Fengguang Signed-off-by: Jens Axboe --- mm/filemap.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index fa5ca304148e..2b0952974cb9 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2527,14 +2527,12 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); sb_start_write(inode->i_sb); mutex_lock(&inode->i_mutex); - blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); mutex_unlock(&inode->i_mutex); @@ -2545,7 +2543,6 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } - blk_finish_plug(&plug); sb_end_write(inode->i_sb); return ret; } From 647d1e4c5235763b83fbfe74a09d148edc6ca152 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Thu, 9 Aug 2012 15:23:09 +0200 Subject: [PATCH 0370/1098] block: move down direct IO plugging Move unplugging for direct I/O from around ->direct_IO() down to do_blockdev_direct_IO(). This implicitly adds plugging for direct writes. CC: Li Shaohua Acked-by: Jeff Moyer Signed-off-by: Wu Fengguang Signed-off-by: Jens Axboe --- fs/direct-io.c | 5 +++++ mm/filemap.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/direct-io.c b/fs/direct-io.c index 1faf4cb56f39..f86c720dba0e 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -1062,6 +1062,7 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, unsigned long user_addr; size_t bytes; struct buffer_head map_bh = { 0, }; + struct blk_plug plug; if (rw & WRITE) rw = WRITE_ODIRECT; @@ -1177,6 +1178,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, PAGE_SIZE - user_addr / PAGE_SIZE); } + blk_start_plug(&plug); + for (seg = 0; seg < nr_segs; seg++) { user_addr = (unsigned long)iov[seg].iov_base; sdio.size += bytes = iov[seg].iov_len; @@ -1235,6 +1238,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, if (sdio.bio) dio_bio_submit(dio, &sdio); + blk_finish_plug(&plug); + /* * It is possible that, we return short IO due to end of file. * In that case, we need to release all the pages we got hold on. diff --git a/mm/filemap.c b/mm/filemap.c index 2b0952974cb9..384344575c37 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1412,12 +1412,8 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov, retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); if (!retval) { - struct blk_plug plug; - - blk_start_plug(&plug); retval = mapping->a_ops->direct_IO(READ, iocb, iov, pos, nr_segs); - blk_finish_plug(&plug); } if (retval > 0) { *ppos = pos + retval; From 865826644e23c329297459b62ef9cc9904abf61a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:27:28 +0200 Subject: [PATCH 0371/1098] Documentation: update missing index files in block/00-INDEX Update missing index files in block/00-INDEX. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/00-INDEX | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d111e3b23db0..d18ecd827c40 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -3,15 +3,21 @@ biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt - - Generic Block Device Capability (/sys/block//capability) + - Generic Block Device Capability (/sys/block//capability) +cfq-iosched.txt + - CFQ IO scheduler tunables +data-integrity.txt + - Block data integrity deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +queue-sysfs.txt + - Queue's sysfs entries request.txt - The members of struct request (in include/linux/blkdev.h) stat.txt - - Block layer statistics in /sys/block//stat + - Block layer statistics in /sys/block//stat switching-sched.txt - Switching I/O schedulers at runtime writeback_cache_control.txt From 2792d8719393a518a847769d36a080ade4273e6b Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:27:29 +0200 Subject: [PATCH 0372/1098] Documentation: update tunable options in block/cfq-iosched.txt Update tunable options in block/cfq-iosched.txt. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/cfq-iosched.txt | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 6d670f570451..d89b4fe724d7 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -1,3 +1,14 @@ +CFQ (Complete Fairness Queueing) +=============================== + +The main aim of CFQ scheduler is to provide a fair allocation of the disk +I/O bandwidth for all the processes which requests an I/O operation. + +CFQ maintains the per process queue for the processes which request I/O +operation(syncronous requests). In case of asynchronous requests, all the +requests from all the processes are batched together according to their +process's I/O priority. + CFQ ioscheduler tunables ======================== @@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID controller or for storage arrays), setting slice_idle=0 might end up in better throughput and acceptable latencies. +back_seek_max +------------- +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +slice_async +----------- +This parameter is same as of slice_sync but for asynchronous queue. The +default value is 40ms. + +slice_async_rq +-------------- +This parameter is used to limit the dispatching of asynchronous request to +device request queue in queue's slice time. The maximum number of request that +are allowed to be dispatched also depends upon the io priority. Default value +for this is 2. + +slice_sync +---------- +When a queue is selected for execution, the queues IO requests are only +executed for a certain amount of time(time_slice) before switching to another +queue. This parameter is used to calculate the time slice of synchronous +queue. + +time_slice is computed using the below equation:- +time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the +time_slice of synchronous queue, increase the value of slice_sync. Default +value is 100ms. + +quantum +------- +This specifies the number of request dispatched to the device queue. In a +queue's time slice, a request will not be dispatched if the number of request +in the device exceeds this parameter. This parameter is used for synchronous +request. + +In case of storage with several disk, this setting can limit the parallel +processing of request. Therefore, increasing the value can imporve the +performace although this can cause the latency of some I/O to increase due +to more number of requests. + CFQ IOPS Mode for group scheduling =================================== Basic CFQ design is to provide priority based time slices. Higher priority From 4004e90cfa4488cf99798b1138183158b64f4a42 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 9 Aug 2012 15:28:05 +0200 Subject: [PATCH 0373/1098] Documentation: update tunable options in block/cfq-iosched.txt Update tunable options in block/cfq-iosched.txt. Signed-off-by: Namjae Jeon Signed-off-by: Jens Axboe --- Documentation/block/queue-sysfs.txt | 64 +++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 6518a55273e7..e54ac1d53403 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory. Files denoted with a RO postfix are readonly and the RW postfix means read-write. +add_random (RW) +---------------- +This file allows to trun off the disk entropy contribution. Default +value of this file is '1'(on). + +discard_granularity (RO) +----------------------- +This shows the size of internal allocation of the device in bytes, if +reported by the device. A value of '0' means device does not support +the discard functionality. + +discard_max_bytes (RO) +---------------------- +Devices that support discard functionality may have internal limits on +the number of bytes that can be trimmed or unmapped in a single operation. +The discard_max_bytes parameter is set by the device driver to the maximum +number of bytes that can be discarded in a single operation. Discard +requests issued to the device must not exceed this limit. A discard_max_bytes +value of 0 means that the device does not support discard functionality. + +discard_zeroes_data (RO) +------------------------ +When read, this file will show if the discarded block are zeroed by the +device or not. If its value is '1' the blocks are zeroed otherwise not. + hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. +iostats (RW) +------------- +This file is used to control (on/off) the iostats accounting of the +disk. + +logical_block_size (RO) +----------------------- +This is the logcal block size of the device, in bytes. + max_hw_sectors_kb (RO) ---------------------- This is the maximum number of kilobytes supported in a single data transfer. +max_integrity_segments (RO) +--------------------------- +When read, this file shows the max limit of integrity segments as +set by block layer which a hardware controller can handle. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. +max_segments (RO) +----------------- +Maximum number of segments of the device. + +max_segment_size (RO) +--------------------- +Maximum segment size of the device. + +minimum_io_size (RO) +-------------------- +This is the smallest preferred io size reported by the device. + nomerges (RW) ------------- This enables the user to disable the lookup logic involved with IO @@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups, each request queue may have upto N request pools, each independently regulated by nr_requests. +optimal_io_size (RO) +-------------------- +This is the optimal io size reported by the device. + +physical_block_size (RO) +------------------------ +This is the physical block size of device, in bytes. + read_ahead_kb (RW) ------------------ Maximum number of kilobytes to read-ahead for filesystems on this block device. +rotational (RW) +--------------- +This file is used to stat if the device is of rotational type or +non-rotational type. + rq_affinity (RW) ---------------- If this option is '1', the block layer will migrate request completions to the From d34e4e00adbbc91ff9fc96ed9a4e4b65161868da Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 9 Aug 2012 15:47:15 +0200 Subject: [PATCH 0374/1098] ALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PM When CONFIG_PM is set but CONFIG_PM_SLEEP is unset, SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to compile warnings. For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM. Reported-by: Arnd Bergmann Signed-off-by: Takashi Iwai --- sound/arm/pxa2xx-ac97.c | 4 ++-- sound/atmel/abdac.c | 2 +- sound/atmel/ac97c.c | 2 +- sound/drivers/aloop.c | 2 +- sound/drivers/dummy.c | 2 +- sound/drivers/pcsp/pcsp.c | 4 ++-- sound/ppc/powermac.c | 2 +- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 0d7b25e81643..4e1fda75c1c9 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -106,7 +106,7 @@ static struct pxa2xx_pcm_client pxa2xx_ac97_pcm_client = { .prepare = pxa2xx_ac97_pcm_prepare, }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int pxa2xx_ac97_do_suspend(struct snd_card *card) { @@ -243,7 +243,7 @@ static struct platform_driver pxa2xx_ac97_driver = { .driver = { .name = "pxa2xx-ac97", .owner = THIS_MODULE, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .pm = &pxa2xx_ac97_pm_ops, #endif }, diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index eb4ceb71123e..98554f4882b7 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -534,7 +534,7 @@ out_put_pclk: return retval; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int atmel_abdac_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index bf47025bdf45..3c8d3ba7ddfc 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -1134,7 +1134,7 @@ err_snd_card_new: return retval; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int atmel_ac97c_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 1128b35b2b05..5a34355e78e8 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -1176,7 +1176,7 @@ static int __devexit loopback_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int loopback_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index f7d3bfc6bca8..54bb6644a598 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -1064,7 +1064,7 @@ static int __devexit snd_dummy_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int snd_dummy_suspend(struct device *pdev) { struct snd_card *card = dev_get_drvdata(pdev); diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c index 6ca59fc6dcb9..ef171295f6d4 100644 --- a/sound/drivers/pcsp/pcsp.c +++ b/sound/drivers/pcsp/pcsp.c @@ -199,7 +199,7 @@ static void pcsp_stop_beep(struct snd_pcsp *chip) pcspkr_stop_sound(); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int pcsp_suspend(struct device *dev) { struct snd_pcsp *chip = dev_get_drvdata(dev); @@ -212,7 +212,7 @@ static SIMPLE_DEV_PM_OPS(pcsp_pm, pcsp_suspend, NULL); #define PCSP_PM_OPS &pcsp_pm #else #define PCSP_PM_OPS NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static void pcsp_shutdown(struct platform_device *dev) { diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c index f5ceb6f282de..210cafe04890 100644 --- a/sound/ppc/powermac.c +++ b/sound/ppc/powermac.c @@ -143,7 +143,7 @@ static int __devexit snd_pmac_remove(struct platform_device *devptr) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int snd_pmac_driver_suspend(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); From e00da2067b78a9246f767012a3803224c40b1f9f Mon Sep 17 00:00:00 2001 From: Alexander Block Date: Thu, 2 Aug 2012 17:16:20 -0600 Subject: [PATCH 0375/1098] Btrfs: remove mnt_want_write call in btrfs_mksubvol We got a recursive lock in mksubvol because the caller already held a lock. I think we got into this due to a merge error. Commit a874a63 removed the mnt_want_write call from btrfs_mksubvol and added a replacement call to mnt_want_write_file in btrfs_ioctl_snap_create_transid. Commit e7848683 however tried to move all calls to mnt_want_write above i_mutex. So somewhere while merging this, it got mixed up. The solution is to remove the mnt_want_write call completely from mksubvol. Reported-by: David Sterba Signed-off-by: Alexander Block Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index bc2f6ffff3cf..7bb755677a22 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -664,10 +664,6 @@ static noinline int btrfs_mksubvol(struct path *parent, struct dentry *dentry; int error; - error = mnt_want_write(parent->mnt); - if (error) - return error; - mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT); dentry = lookup_one_len(name, parent->dentry, namelen); @@ -703,7 +699,6 @@ out_dput: dput(dentry); out_unlock: mutex_unlock(&dir->i_mutex); - mnt_drop_write(parent->mnt); return error; } From 5b6e3eb576e8ad03264d46982afed77bdc6323a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 9 Aug 2012 12:35:48 +0530 Subject: [PATCH 0376/1098] ARM: OMAP4: sleep: Save the complete used register stack frame OMAP4 sleep entry code even though itself don't use many CPU registers makes call to the v7_flush_dcache_all() which uses them. Since v7_flush_dcache_all() doesn't make use of stack, the caller must take care of the stack frame. Otherwise it will lead to corrupted stack frame. Fix it by saving used registers. Reported-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar Cc: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep44xx.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b193..91e71d8f46f0 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* From 1b8652142334a8c0729c5c4536a22cfc6fc49297 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:21 +0530 Subject: [PATCH 0377/1098] cpufreq: OMAP: Handle missing frequency table on SMP systems On OMAP4, if the first CPU fails to get a valid frequency table (this could happen if the platform does not register any OPP table), the subsequent CPU instances end up dealing with a NULL freq_table and crash. Check for an already existing freq_table, before trying to create one, and increment the freq_table_users only if the table is sucessfully created. Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Cc: Signed-off-by: Kevin Hilman --- drivers/cpufreq/omap-cpufreq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d08be9..b47034e650a5 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; From 196449de0c886e64b48d01bd7ee153656db92884 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:22 +0530 Subject: [PATCH 0378/1098] ARM: OMAP4: Register the OPP table only for 4430 device The 4430 OPP table was being registered for all other OMAP4 variants too, like 4460 and 4470 causing issues with cpufreq driver enabled. 4460 and 4470 devices have different OPPs as compared to 4430, and they should be populated seperately. As long as that happens, let the OPP table registeration happen only on 4430 device. Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/opp4xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101b..c95415da23c2 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, From 144dad99ef6ad10c8c8ebe787d08157c4a94201f Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:38:59 -0700 Subject: [PATCH 0379/1098] ALSA: hda_intel: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the Intel HD Audio Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c8aced182fd1..60882c62f180 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -151,6 +151,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{Intel, CPT}," "{Intel, PPT}," "{Intel, LPT}," + "{Intel, LPT_LP}," "{Intel, HPT}," "{Intel, PBG}," "{Intel, SCH}," @@ -3270,6 +3271,14 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(0x8086, 0x8c20), .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, + /* Lynx Point-LP */ + { PCI_DEVICE(0x8086, 0x9c20), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, + /* Lynx Point-LP */ + { PCI_DEVICE(0x8086, 0x9c21), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_COMBO }, /* Haswell */ { PCI_DEVICE(0x8086, 0x0c0c), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | From fb099cb712e878b9eb4e78dd6b268312a0b2b50f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Aug 2012 18:44:37 +0100 Subject: [PATCH 0380/1098] ASoC: core: Upgrade the severity of probe deferral errors to dev_err() In the past when ASoC had a custom probe deferral mechanism people complained about the logspam it generated and didn't want to know about the fact that we were doing probe deferral so all the error messages for it were at dev_dbg(), making diagnostics hard. Now that we have probe deferral as an accepted thing and it's generating log messages anyway there's no need to worry about this so upgrade the severity of all the probe deferral sources to dev_err() so that they are displayed by default. Also add one for missing aux_devs since there wasn't one. Reported-by: Russell King Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f81c5976b961..c501af6d8dbe 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -826,7 +826,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) } if (!rtd->cpu_dai) { - dev_dbg(card->dev, "CPU DAI %s not registered\n", + dev_err(card->dev, "CPU DAI %s not registered\n", dai_link->cpu_dai_name); return -EPROBE_DEFER; } @@ -857,14 +857,14 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) } if (!rtd->codec_dai) { - dev_dbg(card->dev, "CODEC DAI %s not registered\n", + dev_err(card->dev, "CODEC DAI %s not registered\n", dai_link->codec_dai_name); return -EPROBE_DEFER; } } if (!rtd->codec) { - dev_dbg(card->dev, "CODEC %s not registered\n", + dev_err(card->dev, "CODEC %s not registered\n", dai_link->codec_name); return -EPROBE_DEFER; } @@ -888,7 +888,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) rtd->platform = platform; } if (!rtd->platform) { - dev_dbg(card->dev, "platform %s not registered\n", + dev_err(card->dev, "platform %s not registered\n", dai_link->platform_name); return -EPROBE_DEFER; } @@ -1481,6 +1481,8 @@ static int soc_check_aux_dev(struct snd_soc_card *card, int num) return 0; } + dev_err(card->dev, "%s not registered\n", aux_dev->codec_name); + return -EPROBE_DEFER; } From b2a1ef473b031b630a26685c91a46b9ae668d35c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 9 Aug 2012 16:33:00 +0200 Subject: [PATCH 0381/1098] regulator: core: request only valid gpio pins for regulator enable Commit 65f735082de3 ("regulator: core: Add core support for GPIO controlled enable lines") introduced enable gpio entry in regulator configuration structure. Some drivers use '-1' as a placeholder for marking that such gpio line is not available, because '0' is considered as a valid gpio number. This patch fixes initialization of such drivers (like MAX8952 on UniversalC210 board), when '-1' is provided as enable gpio pin in the regulator's platform data. Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f092588a078c..48385318175a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3217,7 +3217,7 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); - if (config->ena_gpio) { + if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { ret = gpio_request_one(config->ena_gpio, GPIOF_DIR_OUT | config->ena_gpio_flags, rdev_get_name(rdev)); From e95829f474f0db3a4d940cae1423783edd966027 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 23 Jul 2012 18:59:30 +0300 Subject: [PATCH 0382/1098] xhci: Switch PPT ports to EHCI on shutdown. The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp Reported-by: Denis Turischev Tested-by: Denis Turischev Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 7 +++++++ drivers/usb/host/pci-quirks.h | 1 + drivers/usb/host/xhci-pci.c | 9 +++++++++ drivers/usb/host/xhci.c | 3 +++ drivers/usb/host/xhci.h | 1 + 5 files changed, 21 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index df0828cb2aa3..c5e9e4a76f14 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -800,6 +800,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) } EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) +{ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0); + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0); +} +EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); + /** * PCI Quirks for xHCI. * diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index b1002a8ef96f..ef004a5de20f 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 92eaff6097c0..9bfd4ca1153c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -94,6 +94,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5c3a3f75e4d5..c59d5b5b6c7d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -659,6 +659,9 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (xhci->quirks && XHCI_SPURIOUS_REBOOT) + usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); spin_unlock_irq(&xhci->lock); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 96f49dbb50ac..c713256297ac 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1494,6 +1494,7 @@ struct xhci_hcd { #define XHCI_TRUST_TX_LENGTH (1 << 10) #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) +#define XHCI_SPURIOUS_REBOOT (1 << 13) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ From 66d1b9263a371abd15806c53f486f0645ef31a8f Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Thu, 9 Aug 2012 02:50:40 +0000 Subject: [PATCH 0383/1098] tun: don't zeroize sock->file on detach This is a fix for bug, introduced in 3.4 kernel by commit 1ab5ecb90cb6a3df1476e052f76a6e8f6511cb3d ("tun: don't hold network namespace by tun sockets"), which, among other things, replaced simple sock_put() by sk_release_kernel(). Below is sequence, which leads to oops for non-persistent devices: tun_chr_close() tun_detach() <== tun->socket.file = NULL tun_free_netdev() sk_release_sock() sock_release(sock->file == NULL) iput(SOCK_INODE(sock)) <== dereference on NULL pointer This patch just removes zeroing of socket's file from __tun_detach(). sock_release() will do this. Cc: stable@vger.kernel.org Reported-by: Ruan Zhijie Tested-by: Ruan Zhijie Acked-by: Al Viro Acked-by: Eric Dumazet Acked-by: Yuchung Cheng Signed-off-by: Stanislav Kinsbursky Signed-off-by: David S. Miller --- drivers/net/tun.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 926d4db5cb38..3a16d4fdaa05 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -187,7 +187,6 @@ static void __tun_detach(struct tun_struct *tun) netif_tx_lock_bh(tun->dev); netif_carrier_off(tun->dev); tun->tfile = NULL; - tun->socket.file = NULL; netif_tx_unlock_bh(tun->dev); /* Drop read queue */ From 8eee694c3e667e6f0856d9c8525208058f9d42bf Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 9 Aug 2012 04:37:25 +0000 Subject: [PATCH 0384/1098] bnx2x: fix unload previous driver flow when flr-capable The existing previous driver unload flow is flawed, causing the probe of functions reaching the 'uncommon fork' in flr-capable devices to fail. This patch resolves this, as well as fixing the flow for hypervisors which disable flr capabilities from functions as they pass them as PDA to VMs, as we cannot base the flow on the pci configuration space. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 55 ++++++++++--------- 1 file changed, 28 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index dd451c3dd83d..5384a6dd155f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9384,32 +9384,24 @@ static int __devinit bnx2x_prev_mark_path(struct bnx2x *bp) return rc; } -static bool __devinit bnx2x_can_flr(struct bnx2x *bp) -{ - int pos; - u32 cap; - struct pci_dev *dev = bp->pdev; - - pos = pci_pcie_cap(dev); - if (!pos) - return false; - - pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); - if (!(cap & PCI_EXP_DEVCAP_FLR)) - return false; - - return true; -} - static int __devinit bnx2x_do_flr(struct bnx2x *bp) { int i, pos; u16 status; struct pci_dev *dev = bp->pdev; - /* probe the capability first */ - if (bnx2x_can_flr(bp)) - return -ENOTTY; + + if (CHIP_IS_E1x(bp)) { + BNX2X_DEV_INFO("FLR not supported in E1/E1H\n"); + return -EINVAL; + } + + /* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */ + if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { + BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", + bp->common.bc_ver); + return -EINVAL; + } pos = pci_pcie_cap(dev); if (!pos) @@ -9429,12 +9421,8 @@ static int __devinit bnx2x_do_flr(struct bnx2x *bp) "transaction is not cleared; proceeding with reset anyway\n"); clear: - if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) { - BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n", - bp->common.bc_ver); - return -EINVAL; - } + BNX2X_DEV_INFO("Initiating FLR\n"); bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0); return 0; @@ -9454,8 +9442,21 @@ static int __devinit bnx2x_prev_unload_uncommon(struct bnx2x *bp) * the one required, then FLR will be sufficient to clean any residue * left by previous driver */ - if (bnx2x_test_firmware_version(bp, false) && bnx2x_can_flr(bp)) - return bnx2x_do_flr(bp); + rc = bnx2x_test_firmware_version(bp, false); + + if (!rc) { + /* fw version is good */ + BNX2X_DEV_INFO("FW version matches our own. Attempting FLR\n"); + rc = bnx2x_do_flr(bp); + } + + if (!rc) { + /* FLR was performed */ + BNX2X_DEV_INFO("FLR successful\n"); + return 0; + } + + BNX2X_DEV_INFO("Could not FLR\n"); /* Close the MCP request, return failure*/ rc = bnx2x_prev_mcp_done(bp); From 2070ffa2c8d4dc17cd8fc4b30d2710bcde27b051 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Thu, 9 Aug 2012 04:37:26 +0000 Subject: [PATCH 0385/1098] bnx2x: Fix recovery flow cleanup during probe During probe, every function probed clears the recovery registers from all functions on its path - thus signaling that given a future recovery event, there will be no need to wait for those functions. This is a flawed behaviour - each function should only be responsible for its own bit. Since this registers are handled during the load/unload routines, this cleanup is removed altogether. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5384a6dd155f..02b5a343b195 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4041,20 +4041,6 @@ static bool bnx2x_get_load_status(struct bnx2x *bp, int engine) return val != 0; } -/* - * Reset the load status for the current engine. - */ -static void bnx2x_clear_load_status(struct bnx2x *bp) -{ - u32 val; - u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : - BNX2X_PATH0_LOAD_CNT_MASK); - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); - val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); - REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask)); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); -} - static void _print_next_block(int idx, const char *blk) { pr_cont("%s%s", idx ? ", " : "", blk); @@ -11428,9 +11414,6 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, if (!chip_is_e1x) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); - /* Reset the load counter */ - bnx2x_clear_load_status(bp); - dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &bnx2x_netdev_ops; From 3a7c384ffd57ef5fbd95f48edaa2ca4eb3d9f2ee Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Aug 2012 13:56:06 +0000 Subject: [PATCH 0386/1098] ipv4: tcp: unicast_sock should not land outside of TCP stack commit be9f4a44e7d41cee (ipv4: tcp: remove per net tcp_sock) added a selinux regression, reported and bisected by John Stultz selinux_ip_postroute_compat() expect to find a valid sk->sk_security pointer, but this field is NULL for unicast_sock It turns out that unicast_sock are really temporary stuff to be able to reuse part of IP stack (ip_append_data()/ip_push_pending_frames()) Fact is that frames sent by ip_send_unicast_reply() should be orphaned to not fool LSM. Note IPv6 never had this problem, as tcp_v6_send_response() doesnt use a fake socket at all. I'll probably implement tcp_v4_send_response() to remove these unicast_sock in linux-3.7 Reported-by: John Stultz Bisected-by: John Stultz Signed-off-by: Eric Dumazet Cc: Paul Moore Cc: Eric Paris Cc: "Serge E. Hallyn" Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 76dde25fb9a0..ec410e08b4b9 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1536,6 +1536,7 @@ void ip_send_unicast_reply(struct net *net, struct sk_buff *skb, __be32 daddr, arg->csumoffset) = csum_fold(csum_add(nskb->csum, arg->csum)); nskb->ip_summed = CHECKSUM_NONE; + skb_orphan(nskb); skb_set_queue_mapping(nskb, skb_get_queue_mapping(skb)); ip_push_pending_frames(sk, &fl4); } From 63d02d157ec4124990258d66517b6c11fd6df0cf Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Aug 2012 14:11:00 +0000 Subject: [PATCH 0387/1098] net: tcp: ipv6_mapped needs sk_rx_dst_set method commit 5d299f3d3c8a2fb (net: ipv6: fix TCP early demux) added a regression for ipv6_mapped case. [ 67.422369] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 67.449678] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 92.631060] BUG: unable to handle kernel NULL pointer dereference at (null) [ 92.631435] IP: [< (null)>] (null) [ 92.631645] PGD 0 [ 92.631846] Oops: 0010 [#1] SMP [ 92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd uhci_hcd [ 92.634294] CPU 0 [ 92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3 [ 92.634294] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 92.634294] RSP: 0018:ffff880245fc7cb0 EFLAGS: 00010282 [ 92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX: 0000000000000000 [ 92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI: ffff88024827ad00 [ 92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09: 0000000000000000 [ 92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12: ffff880254735380 [ 92.634294] R13: ffff880254735380 R14: 0000000000000000 R15: 7fffffffffff0218 [ 92.634294] FS: 00007f4516ccd6f0(0000) GS:ffff880256600000(0000) knlGS:0000000000000000 [ 92.634294] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4: 00000000000007f0 [ 92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000, task ffff880254b8cac0) [ 92.634294] Stack: [ 92.634294] ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8 ffff880245fc7d68 [ 92.634294] ffffffff81385083 00000000001d2680 ffff8802547353a8 ffff880245fc7d18 [ 92.634294] ffffffff8105903a ffff88024827ad60 0000000000000002 00000000000000ff [ 92.634294] Call Trace: [ 92.634294] [] ? tcp_finish_connect+0x2c/0xfa [ 92.634294] [] tcp_rcv_state_process+0x2b6/0x9c6 [ 92.634294] [] ? sched_clock_cpu+0xc3/0xd1 [ 92.634294] [] ? local_clock+0x2b/0x3c [ 92.634294] [] tcp_v4_do_rcv+0x63a/0x670 [ 92.634294] [] release_sock+0x128/0x1bd [ 92.634294] [] __inet_stream_connect+0x1b1/0x352 [ 92.634294] [] ? lock_sock_nested+0x74/0x7f [ 92.634294] [] ? wake_up_bit+0x25/0x25 [ 92.634294] [] ? lock_sock_nested+0x74/0x7f [ 92.634294] [] ? inet_stream_connect+0x22/0x4b [ 92.634294] [] inet_stream_connect+0x33/0x4b [ 92.634294] [] sys_connect+0x78/0x9e [ 92.634294] [] ? sysret_check+0x1b/0x56 [ 92.634294] [] ? __audit_syscall_entry+0x195/0x1c8 [ 92.634294] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 92.634294] [] system_call_fastpath+0x16/0x1b [ 92.634294] Code: Bad RIP value. [ 92.634294] RIP [< (null)>] (null) [ 92.634294] RSP [ 92.634294] CR2: 0000000000000000 [ 92.648982] ---[ end trace 24e2bed94314c8d9 ]--- [ 92.649146] Kernel panic - not syncing: Fatal exception in interrupt Fix this using inet_sk_rx_dst_set(), and export this function in case IPv6 is modular. Reported-by: Andrew Morton Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/tcp.h | 1 + net/ipv4/tcp_ipv4.c | 3 ++- net/ipv6/tcp_ipv6.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index e19124b84cd2..1f000ffe7075 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -464,6 +464,7 @@ extern int tcp_disconnect(struct sock *sk, int flags); void tcp_connect_init(struct sock *sk); void tcp_finish_connect(struct sock *sk, struct sk_buff *skb); int tcp_send_rcvq(struct sock *sk, struct msghdr *msg, size_t size); +void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb); /* From syncookies.c */ extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS]; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 272241f16fcb..767823764016 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1869,7 +1869,7 @@ static struct timewait_sock_ops tcp_timewait_sock_ops = { .twsk_destructor= tcp_twsk_destructor, }; -static void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) { struct dst_entry *dst = skb_dst(skb); @@ -1877,6 +1877,7 @@ static void inet_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) sk->sk_rx_dst = dst; inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; } +EXPORT_SYMBOL(inet_sk_rx_dst_set); const struct inet_connection_sock_af_ops ipv4_specific = { .queue_xmit = ip_queue_xmit, diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 5a439e9a4c01..bb9ce2b2f377 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1777,6 +1777,7 @@ static const struct inet_connection_sock_af_ops ipv6_mapped = { .queue_xmit = ip_queue_xmit, .send_check = tcp_v4_send_check, .rebuild_header = inet_sk_rebuild_header, + .sk_rx_dst_set = inet_sk_rx_dst_set, .conn_request = tcp_v6_conn_request, .syn_recv_sock = tcp_v6_syn_recv_sock, .net_header_len = sizeof(struct iphdr), From 32ab31e01e2def6f48294d872d9bb42573aae00f Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 8 Aug 2012 08:27:03 -0500 Subject: [PATCH 0388/1098] irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2, but the only remapping unit described in the DMAR table matches id 0. Interrupt remapping fails as a result, and the kernel panics with the message "timer doesn't work through Interrupt-remapped IO-APIC." To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is not found, do not allow IRQ remapping to be enabled. v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR, and add FW_BUG to the log message v3: Skip check if IOMMU doesn't support interrupt remapping and remove existing check that the IOMMU count equals the IOAPIC count Acked-by: Suresh Siddha Signed-off-by: Seth Forshee Acked-by: Yinghai Lu Signed-off-by: Joerg Roedel --- drivers/iommu/intel_irq_remapping.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index e0b18f3ae9a8..af8904de1d44 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -736,6 +736,7 @@ int __init parse_ioapics_under_ir(void) { struct dmar_drhd_unit *drhd; int ir_supported = 0; + int ioapic_idx; for_each_drhd_unit(drhd) { struct intel_iommu *iommu = drhd->iommu; @@ -748,13 +749,20 @@ int __init parse_ioapics_under_ir(void) } } - if (ir_supported && ir_ioapic_num != nr_ioapics) { - printk(KERN_WARNING - "Not all IO-APIC's listed under remapping hardware\n"); - return -1; + if (!ir_supported) + return 0; + + for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { + int ioapic_id = mpc_ioapic_id(ioapic_idx); + if (!map_ioapic_to_ir(ioapic_id)) { + pr_err(FW_BUG "ioapic %d has no mapping iommu, " + "interrupt remapping will be disabled\n", + ioapic_id); + return -1; + } } - return ir_supported; + return 1; } int __init ir_dev_scope_init(void) From 2bd5ed002c0c493ac328f13a9e2a504261a7d48e Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 10 Aug 2012 11:34:08 +0200 Subject: [PATCH 0389/1098] iommu/amd: Fix wrong check for ARRAY_SIZE() The check in the for-loop is broken. Fix it and the boot-crash it causes in AMD IOMMUv2 systems. Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c index 0a2ea317120a..18a89b760aaa 100644 --- a/drivers/iommu/amd_iommu_init.c +++ b/drivers/iommu/amd_iommu_init.c @@ -1111,7 +1111,7 @@ static void print_iommu_info(void) if (iommu->cap & (1 << IOMMU_CAP_EFR)) { pr_info("AMD-Vi: Extended features: "); - for (i = 0; ARRAY_SIZE(feat_str); ++i) { + for (i = 0; i < ARRAY_SIZE(feat_str); ++i) { if (iommu_feature(iommu, (1ULL << i))) pr_cont(" %s", feat_str[i]); } From e9324b2ce656e1910d2385b9b47a2f926456dbe3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:45 +0000 Subject: [PATCH 0390/1098] netfilter: nf_ct_sip: fix helper name Commit 3a8fc53a (netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names) introduced a bug in the SIP helper, the helper name is sprinted to the sip_names array instead of instead of into the helper structure. This breaks the helper match and the /proc/net/nf_conntrack_expect output. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_sip.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 758a1bacc126..2fb666920cc9 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1515,7 +1515,6 @@ static int sip_help_udp(struct sk_buff *skb, unsigned int protoff, } static struct nf_conntrack_helper sip[MAX_PORTS][4] __read_mostly; -static char sip_names[MAX_PORTS][4][sizeof("sip-65535")] __read_mostly; static const struct nf_conntrack_expect_policy sip_exp_policy[SIP_EXPECT_MAX + 1] = { [SIP_EXPECT_SIGNALLING] = { @@ -1585,9 +1584,9 @@ static int __init nf_conntrack_sip_init(void) sip[i][j].me = THIS_MODULE; if (ports[i] == SIP_PORT) - sprintf(sip_names[i][j], "sip"); + sprintf(sip[i][j].name, "sip"); else - sprintf(sip_names[i][j], "sip-%u", i); + sprintf(sip[i][j].name, "sip-%u", i); pr_debug("port #%u: %u\n", i, ports[i]); From 02b69cbdc2fb2e1bfbfd9ac0c246d7be1b08d3cd Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:46 +0000 Subject: [PATCH 0391/1098] netfilter: nf_ct_sip: fix IPv6 address parsing Within SIP messages IPv6 addresses are enclosed in square brackets in most cases, with the exception of the "received=" header parameter. Currently the helper fails to parse enclosed addresses. This patch: - changes the SIP address parsing function to enforce square brackets when required, and accept them when not required but present, as recommended by RFC 5118. - adds a new SDP address parsing function that never accepts square brackets since SDP doesn't use them. With these changes, the SIP helper correctly parses all test messages from RFC 5118 (Session Initiation Protocol (SIP) Torture Test Messages for Internet Protocol Version 6 (IPv6)). Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_sip.h | 2 +- net/ipv4/netfilter/nf_nat_sip.c | 4 +- net/netfilter/nf_conntrack_sip.c | 87 +++++++++++++++++----- 3 files changed, 73 insertions(+), 20 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 0dfc8b7210a3..89f2a627f3f0 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -164,7 +164,7 @@ extern int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr unsigned int dataoff, unsigned int datalen, const char *name, unsigned int *matchoff, unsigned int *matchlen, - union nf_inet_addr *addr); + union nf_inet_addr *addr, bool delim); extern int ct_sip_parse_numerical_param(const struct nf_conn *ct, const char *dptr, unsigned int off, unsigned int datalen, const char *name, diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index ea4a23813d26..eef8f29e8bf8 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -173,7 +173,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, * the reply. */ if (ct_sip_parse_address_param(ct, *dptr, matchend, *datalen, "maddr=", &poff, &plen, - &addr) > 0 && + &addr, true) > 0 && addr.ip == ct->tuplehash[dir].tuple.src.u3.ip && addr.ip != ct->tuplehash[!dir].tuple.dst.u3.ip) { buflen = sprintf(buffer, "%pI4", @@ -187,7 +187,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, * from which the server received the request. */ if (ct_sip_parse_address_param(ct, *dptr, matchend, *datalen, "received=", &poff, &plen, - &addr) > 0 && + &addr, false) > 0 && addr.ip == ct->tuplehash[dir].tuple.dst.u3.ip && addr.ip != ct->tuplehash[!dir].tuple.src.u3.ip) { buflen = sprintf(buffer, "%pI4", diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 2fb666920cc9..5c0a112aeee6 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -183,12 +183,12 @@ static int media_len(const struct nf_conn *ct, const char *dptr, return len + digits_len(ct, dptr, limit, shift); } -static int parse_addr(const struct nf_conn *ct, const char *cp, - const char **endp, union nf_inet_addr *addr, - const char *limit) +static int sip_parse_addr(const struct nf_conn *ct, const char *cp, + const char **endp, union nf_inet_addr *addr, + const char *limit, bool delim) { const char *end; - int ret = 0; + int ret; if (!ct) return 0; @@ -197,16 +197,28 @@ static int parse_addr(const struct nf_conn *ct, const char *cp, switch (nf_ct_l3num(ct)) { case AF_INET: ret = in4_pton(cp, limit - cp, (u8 *)&addr->ip, -1, &end); + if (ret == 0) + return 0; break; case AF_INET6: + if (cp < limit && *cp == '[') + cp++; + else if (delim) + return 0; + ret = in6_pton(cp, limit - cp, (u8 *)&addr->ip6, -1, &end); + if (ret == 0) + return 0; + + if (end < limit && *end == ']') + end++; + else if (delim) + return 0; break; default: BUG(); } - if (ret == 0 || end == cp) - return 0; if (endp) *endp = end; return 1; @@ -219,7 +231,7 @@ static int epaddr_len(const struct nf_conn *ct, const char *dptr, union nf_inet_addr addr; const char *aux = dptr; - if (!parse_addr(ct, dptr, &dptr, &addr, limit)) { + if (!sip_parse_addr(ct, dptr, &dptr, &addr, limit, true)) { pr_debug("ip: %s parse failed.!\n", dptr); return 0; } @@ -296,7 +308,7 @@ int ct_sip_parse_request(const struct nf_conn *ct, return 0; dptr += shift; - if (!parse_addr(ct, dptr, &end, addr, limit)) + if (!sip_parse_addr(ct, dptr, &end, addr, limit, true)) return -1; if (end < limit && *end == ':') { end++; @@ -550,7 +562,7 @@ int ct_sip_parse_header_uri(const struct nf_conn *ct, const char *dptr, if (ret == 0) return ret; - if (!parse_addr(ct, dptr + *matchoff, &c, addr, limit)) + if (!sip_parse_addr(ct, dptr + *matchoff, &c, addr, limit, true)) return -1; if (*c == ':') { c++; @@ -599,7 +611,7 @@ int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr, unsigned int dataoff, unsigned int datalen, const char *name, unsigned int *matchoff, unsigned int *matchlen, - union nf_inet_addr *addr) + union nf_inet_addr *addr, bool delim) { const char *limit = dptr + datalen; const char *start, *end; @@ -613,7 +625,7 @@ int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr, return 0; start += strlen(name); - if (!parse_addr(ct, start, &end, addr, limit)) + if (!sip_parse_addr(ct, start, &end, addr, limit, delim)) return 0; *matchoff = start - dptr; *matchlen = end - start; @@ -675,6 +687,47 @@ static int ct_sip_parse_transport(struct nf_conn *ct, const char *dptr, return 1; } +static int sdp_parse_addr(const struct nf_conn *ct, const char *cp, + const char **endp, union nf_inet_addr *addr, + const char *limit) +{ + const char *end; + int ret; + + memset(addr, 0, sizeof(*addr)); + switch (nf_ct_l3num(ct)) { + case AF_INET: + ret = in4_pton(cp, limit - cp, (u8 *)&addr->ip, -1, &end); + break; + case AF_INET6: + ret = in6_pton(cp, limit - cp, (u8 *)&addr->ip6, -1, &end); + break; + default: + BUG(); + } + + if (ret == 0) + return 0; + if (endp) + *endp = end; + return 1; +} + +/* skip ip address. returns its length. */ +static int sdp_addr_len(const struct nf_conn *ct, const char *dptr, + const char *limit, int *shift) +{ + union nf_inet_addr addr; + const char *aux = dptr; + + if (!sdp_parse_addr(ct, dptr, &dptr, &addr, limit)) { + pr_debug("ip: %s parse failed.!\n", dptr); + return 0; + } + + return dptr - aux; +} + /* SDP header parsing: a SDP session description contains an ordered set of * headers, starting with a section containing general session parameters, * optionally followed by multiple media descriptions. @@ -686,10 +739,10 @@ static int ct_sip_parse_transport(struct nf_conn *ct, const char *dptr, */ static const struct sip_header ct_sdp_hdrs[] = { [SDP_HDR_VERSION] = SDP_HDR("v=", NULL, digits_len), - [SDP_HDR_OWNER_IP4] = SDP_HDR("o=", "IN IP4 ", epaddr_len), - [SDP_HDR_CONNECTION_IP4] = SDP_HDR("c=", "IN IP4 ", epaddr_len), - [SDP_HDR_OWNER_IP6] = SDP_HDR("o=", "IN IP6 ", epaddr_len), - [SDP_HDR_CONNECTION_IP6] = SDP_HDR("c=", "IN IP6 ", epaddr_len), + [SDP_HDR_OWNER_IP4] = SDP_HDR("o=", "IN IP4 ", sdp_addr_len), + [SDP_HDR_CONNECTION_IP4] = SDP_HDR("c=", "IN IP4 ", sdp_addr_len), + [SDP_HDR_OWNER_IP6] = SDP_HDR("o=", "IN IP6 ", sdp_addr_len), + [SDP_HDR_CONNECTION_IP6] = SDP_HDR("c=", "IN IP6 ", sdp_addr_len), [SDP_HDR_MEDIA] = SDP_HDR("m=", NULL, media_len), }; @@ -775,8 +828,8 @@ static int ct_sip_parse_sdp_addr(const struct nf_conn *ct, const char *dptr, if (ret <= 0) return ret; - if (!parse_addr(ct, dptr + *matchoff, NULL, addr, - dptr + *matchoff + *matchlen)) + if (!sdp_parse_addr(ct, dptr + *matchoff, NULL, addr, + dptr + *matchoff + *matchlen)) return -1; return 1; } From f22eb25cf5b1157b29ef88c793b71972efc47143 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 9 Aug 2012 10:08:47 +0000 Subject: [PATCH 0392/1098] netfilter: nf_nat_sip: fix via header translation with multiple parameters Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nf_nat_sip.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index eef8f29e8bf8..4ad9cf173992 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -148,7 +148,7 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen, hdr, NULL, &matchoff, &matchlen, &addr, &port) > 0) { - unsigned int matchend, poff, plen, buflen, n; + unsigned int olen, matchend, poff, plen, buflen, n; char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")]; /* We're only interested in headers related to this @@ -163,11 +163,12 @@ static unsigned int ip_nat_sip(struct sk_buff *skb, unsigned int dataoff, goto next; } + olen = *datalen; if (!map_addr(skb, dataoff, dptr, datalen, matchoff, matchlen, &addr, port)) return NF_DROP; - matchend = matchoff + matchlen; + matchend = matchoff + matchlen + *datalen - olen; /* The maddr= parameter (RFC 2361) specifies where to send * the reply. */ From 367e43c50d7f7c3b0cec17f4d855a96f47f5e17b Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 10 Aug 2012 11:55:11 +0200 Subject: [PATCH 0393/1098] link-vmlinux.sh: Fix stray "echo" in error message Reported-by: Jan Engelhardt Signed-off-by: Michal Marek --- scripts/link-vmlinux.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 4629038c9e5a..4235a6361fec 100644 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -211,7 +211,7 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then if ! cmp -s System.map .tmp_System.map; then echo >&2 Inconsistent kallsyms data - echo >&2 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround + echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround cleanup exit 1 fi From 9d8dad742ad1c74d7e7210ee05d0b44961d5ea16 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 9 Aug 2012 19:01:26 -0700 Subject: [PATCH 0394/1098] Yama: higher restrictions should block PTRACE_TRACEME The higher ptrace restriction levels should be blocking even PTRACE_TRACEME requests. The comments in the LSM documentation are misleading about when the checks happen (the parent does not go through security_ptrace_access_check() on a PTRACE_TRACEME call). Signed-off-by: Kees Cook Cc: stable@vger.kernel.org # 3.5.x and later Signed-off-by: James Morris --- Documentation/security/Yama.txt | 14 +++++------ include/linux/security.h | 2 -- security/yama/yama_lsm.c | 41 +++++++++++++++++++++++++++++++++ 3 files changed, 48 insertions(+), 9 deletions(-) diff --git a/Documentation/security/Yama.txt b/Documentation/security/Yama.txt index e369de2d48cd..dd908cf64ecf 100644 --- a/Documentation/security/Yama.txt +++ b/Documentation/security/Yama.txt @@ -46,14 +46,13 @@ restrictions, it can call prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY, ...) so that any otherwise allowed process (even those in external pid namespaces) may attach. -These restrictions do not change how ptrace via PTRACE_TRACEME operates. - -The sysctl settings are: +The sysctl settings (writable only with CAP_SYS_PTRACE) are: 0 - classic ptrace permissions: a process can PTRACE_ATTACH to any other process running under the same uid, as long as it is dumpable (i.e. did not transition uids, start privileged, or have called - prctl(PR_SET_DUMPABLE...) already). + prctl(PR_SET_DUMPABLE...) already). Similarly, PTRACE_TRACEME is + unchanged. 1 - restricted ptrace: a process must have a predefined relationship with the inferior it wants to call PTRACE_ATTACH on. By default, @@ -61,12 +60,13 @@ The sysctl settings are: classic criteria is also met. To change the relationship, an inferior can call prctl(PR_SET_PTRACER, debugger, ...) to declare an allowed debugger PID to call PTRACE_ATTACH on the inferior. + Using PTRACE_TRACEME is unchanged. 2 - admin-only attach: only processes with CAP_SYS_PTRACE may use ptrace - with PTRACE_ATTACH. + with PTRACE_ATTACH, or through children calling PTRACE_TRACEME. -3 - no attach: no processes may use ptrace with PTRACE_ATTACH. Once set, - this sysctl cannot be changed to a lower value. +3 - no attach: no processes may use ptrace with PTRACE_ATTACH nor via + PTRACE_TRACEME. Once set, this sysctl value cannot be changed. The original children-only logic was based on the restrictions in grsecurity. diff --git a/include/linux/security.h b/include/linux/security.h index 4e5a73cdbbef..3dea6a9d568f 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1242,8 +1242,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * Check that the @parent process has sufficient permission to trace the * current process before allowing the current process to present itself * to the @parent process for tracing. - * The parent process will still have to undergo the ptrace_access_check - * checks before it is allowed to trace this one. * @parent contains the task_struct structure for debugger process. * Return 0 if permission is granted. * @capget: diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index 83554ee8a587..d51b7c76c37d 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -290,10 +290,51 @@ static int yama_ptrace_access_check(struct task_struct *child, return rc; } +/** + * yama_ptrace_traceme - validate PTRACE_TRACEME calls + * @parent: task that will become the ptracer of the current task + * + * Returns 0 if following the ptrace is allowed, -ve on error. + */ +static int yama_ptrace_traceme(struct task_struct *parent) +{ + int rc; + + /* If standard caps disallows it, so does Yama. We should + * only tighten restrictions further. + */ + rc = cap_ptrace_traceme(parent); + if (rc) + return rc; + + /* Only disallow PTRACE_TRACEME on more aggressive settings. */ + switch (ptrace_scope) { + case YAMA_SCOPE_CAPABILITY: + if (!ns_capable(task_user_ns(parent), CAP_SYS_PTRACE)) + rc = -EPERM; + break; + case YAMA_SCOPE_NO_ATTACH: + rc = -EPERM; + break; + } + + if (rc) { + char name[sizeof(current->comm)]; + printk_ratelimited(KERN_NOTICE + "ptraceme of pid %d was attempted by: %s (pid %d)\n", + current->pid, + get_task_comm(name, parent), + parent->pid); + } + + return rc; +} + static struct security_operations yama_ops = { .name = "yama", .ptrace_access_check = yama_ptrace_access_check, + .ptrace_traceme = yama_ptrace_traceme, .task_prctl = yama_task_prctl, .task_free = yama_task_free, }; From 9c30959884261518de46e0b79ac7a902e6ddd147 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 23 Jun 2012 11:25:43 +0100 Subject: [PATCH 0395/1098] MAINTAINERS: Add entries for Wolfson Arizona class devices Signed-off-by: Mark Brown --- MAINTAINERS | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e94..dba8941fb425 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7665,23 +7665,28 @@ S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c +F: drivers/extcon/extcon-arizona.c F: drivers/leds/leds-wm83*.c F: drivers/gpio/gpio-*wm*.c +F: drivers/gpio/gpio-arizona.c F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c -F: drivers/mfd/wm8*.c +F: drivers/mfd/arizona* +F: drivers/mfd/wm*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c F: drivers/regulator/wm8*.c F: drivers/video/backlight/wm83*_bl.c F: drivers/watchdog/wm83*_wdt.c +F: include/linux/mfd/arizona/ F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* F: include/linux/wm97xx.h F: include/sound/wm????.h +F: sound/soc/codecs/arizona.? F: sound/soc/codecs/wm* WORKQUEUE From de64c0ee7dbcbfbbe63bd9ea45783d87babc6452 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 10 Aug 2012 12:22:58 +0300 Subject: [PATCH 0396/1098] ALSA: cs46xx - signedness bug in snd_cs46xx_codec_read() This function returns its own error codes instead of normal negative error codes. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/cs46xx/cs46xx_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index f75f5ffdfdfb..a71d1c14a0f6 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -94,7 +94,7 @@ static unsigned short snd_cs46xx_codec_read(struct snd_cs46xx *chip, if (snd_BUG_ON(codec_index != CS46XX_PRIMARY_CODEC_INDEX && codec_index != CS46XX_SECONDARY_CODEC_INDEX)) - return -EINVAL; + return 0xffff; chip->active_ctrl(chip, 1); From 8ab08c0c4c39f36d3bf89e03a4bc3e6898e1563c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:28:33 +0000 Subject: [PATCH 0397/1098] ARM: exynos: exynos_pm_add_dev_to_genpd may be unused exynos_pm_add_dev_to_genpd is used if one or more out of a large number of Kconfig symbols are enabled. However the new exynos_defconfig selects none of those, so the function becomes unused. Marking it so lets the compiler automatically discard it. Without this patch, building exynos_defconfig results in: arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Acked-by: Thomas Abraham Acked-by: Kukjin Kim Cc: Rafael J. Wysocki --- arch/arm/mach-exynos/pm_domains.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24c..c0bc83a7663e 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { From 38eaed327dc5bea2e5548ea3d195de83a2070c6d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:33:24 +0000 Subject: [PATCH 0398/1098] gpio: em: do not discard em_gio_irq_domain_cleanup The newly added gpio-em driver marks its em_gio_irq_domain_cleanup function as __devexit, which would lead to that function being discarded in case CONFIG_HOTPLUG is disabled. However, the function is also called by the error handling logic em_gio_probe, which would cause a jump into a NULL pointer if it was removed from the kernel or module. Without this patch, building kzm9d_defconfig results in: WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup() The function __devinit em_gio_probe() references a function __devexit em_gio_irq_domain_cleanup(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of em_gio_irq_domain_cleanup() so it may be used outside an exit section. Signed-off-by: Arnd Bergmann Cc: Magnus Damm Cc: Linus Walleij Cc: Rafael J. Wysocki --- drivers/gpio/gpio-em.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index 150d9768811d..ae37181798b3 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -266,7 +266,7 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) return 0; } -static void __devexit em_gio_irq_domain_cleanup(struct em_gio_priv *p) +static void em_gio_irq_domain_cleanup(struct em_gio_priv *p) { struct gpio_em_config *pdata = p->pdev->dev.platform_data; From d680e2c11eb0ddd21ba438b3a537e2eb093ff86f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 11:05:25 +0000 Subject: [PATCH 0399/1098] mtd/omap2: fix dmaengine_slave_config error handling The newly added dmaengine support in the omap2 nand driver potentially causes an undefined return value from the omap_nand_probe function when dmaengine_slave_config reports an error. Let's handle this by returning the same error back to the caller. Without this patch, building omap2plus_defconfig results in: drivers/mtd/nand/omap2.c: In function 'omap_nand_probe': drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Cc: Russell King Cc: Grazvydas Ignotas --- drivers/mtd/nand/omap2.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index e9309b3659e7..ac4fd756eda3 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1245,7 +1245,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } else { struct dma_slave_config cfg; - int rc; memset(&cfg, 0, sizeof(cfg)); cfg.src_addr = info->phys_base; @@ -1254,10 +1253,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.src_maxburst = 16; cfg.dst_maxburst = 16; - rc = dmaengine_slave_config(info->dma, &cfg); - if (rc) { + err = dmaengine_slave_config(info->dma, &cfg); + if (err) { dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", - rc); + err); goto out_release_mem_region; } info->nand.read_buf = omap_read_buf_dma_pref; From 4732cc636075ff1a0219bf933d8c23d1a99f41ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 11:18:20 +0000 Subject: [PATCH 0400/1098] spi/s3c64xx: improve error handling When a device tree definition os an s3c64xx SPI master is missing a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata function might use uninitialized memory in place of that node, which was correctly reported by gcc. Without this patch, building s3c6400_defconfig results in: drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25': drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Acked-by: Thomas Abraham Acked-by: Kukjin Kim Cc: Jaswinder Singh Cc: Grant Likely --- drivers/spi/spi-s3c64xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 646a7657fe62..cfa2c35dfeed 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -826,7 +826,7 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs; - struct device_node *slave_np, *data_np; + struct device_node *slave_np, *data_np = NULL; u32 fb_delay = 0; slave_np = spi->dev.of_node; From 59596df640eb049952dbfe5e7e64ffe826abfe61 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 07:11:34 +0000 Subject: [PATCH 0401/1098] omap-rng: fix use of SIMPLE_DEV_PM_OPS omap_rng_suspend and omap_rng_resume are unused if CONFIG_PM is enabled but CONFIG_PM_SLEEP is disabled. I found this while building all defconfig files on ARM. It's not clear to me if this is the right solution, but at least it makes the code consistent again. Without this patch, building omap1_defconfig results in: drivers/char/hw_random/omap-rng.c:165:12: warning: 'omap_rng_suspend' defined but not used [-Wunused-function] drivers/char/hw_random/omap-rng.c:171:12: warning: 'omap_rng_resume' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Acked-by: Kevin Hilman Cc: Rafael J. Wysocki Cc: Herbert Xu --- drivers/char/hw_random/omap-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d706bd0e9e80..4fbdceb6f773 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -160,7 +160,7 @@ static int __exit omap_rng_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int omap_rng_suspend(struct device *dev) { From f7b83b908fbecadefa73c0d76b9c719d09c1d96d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Tue, 7 Aug 2012 12:23:06 +0000 Subject: [PATCH 0402/1098] drm/edid: Fix potential memory leak in edid_load() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Reviewed-by: Carsten Emde Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid_load.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 66d4a28ad5a2..0303935d10e2 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -119,7 +119,7 @@ static int edid_load(struct drm_connector *connector, char *name, { const struct firmware *fw; struct platform_device *pdev; - u8 *fwdata = NULL, *edid; + u8 *fwdata = NULL, *edid, *new_edid; int fwsize, expected; int builtin = 0, err = 0; int i, valid_extensions = 0; @@ -195,12 +195,14 @@ static int edid_load(struct drm_connector *connector, char *name, "\"%s\" for connector \"%s\"\n", valid_extensions, edid[0x7e], name, connector_name); edid[0x7e] = valid_extensions; - edid = krealloc(edid, (valid_extensions + 1) * EDID_LENGTH, + new_edid = krealloc(edid, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL); - if (edid == NULL) { + if (new_edid == NULL) { err = -ENOMEM; + kfree(edid); goto relfw_out; } + edid = new_edid; } connector->display_info.raw_edid = edid; From 9830605d4c070b16ec5c24a75503877cc7698409 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 9 Aug 2012 15:00:15 +1000 Subject: [PATCH 0403/1098] drm/mgag200: fix G200ER pll picking algorithm The original code was misported from the X driver, a) an int went to unsigned int, breaking the downward counting testm code b) the port did the vco/computed clock bits completely wrong. This fixes an infinite loop on modprobe on some Dell servers with the G200ER chipset variant. Found in internal testing. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index a4d7c500c97b..b69642d5d850 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -468,10 +468,11 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) { unsigned int vcomax, vcomin, pllreffreq; unsigned int delta, tmpdelta; - unsigned int testr, testn, testm, testo; + int testr, testn, testm, testo; unsigned int p, m, n; - unsigned int computed; + unsigned int computed, vco; int tmp; + const unsigned int m_div_val[] = { 1, 2, 4, 8 }; m = n = p = 0; vcomax = 1488000; @@ -490,12 +491,13 @@ static int mga_g200er_set_plls(struct mga_device *mdev, long clock) if (delta == 0) break; for (testo = 5; testo < 33; testo++) { - computed = pllreffreq * (testn + 1) / + vco = pllreffreq * (testn + 1) / (testr + 1); - if (computed < vcomin) + if (vco < vcomin) continue; - if (computed > vcomax) + if (vco > vcomax) continue; + computed = vco / (m_div_val[testm] * (testo + 1)); if (computed > clock) tmpdelta = computed - clock; else From 15b5eb2d913f857ad30b0b4f1cd6867495962221 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 3 May 2012 12:47:54 +0000 Subject: [PATCH 0404/1098] ARM: s3c24xx: enable CONFIG_BUG for tct_hammer Disabling CONFIG_BUG creates an insane amount of build warnings, which makes it useless to check for building defconfigs to see if new warnings show up. Without this patch, building tct_hammer_defconfig results in: net/packet/af_packet.c: In function 'tpacket_rcv': net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized] net/core/ethtool.c: In function 'ethtool_get_feature_mask': net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type] block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type] mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type] net/core/dev.c: In function 'skb_warn_bad_offload': net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable] drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup': include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] (and many more) The size of vmlinux increases by 1.78% because of this: size obj-arm/vmlinux.nobug text data bss dec hex filename 2108474 116916 55352 2280742 22cd26 obj-arm/vmlinux size obj-arm/vmlinux.bug text data bss dec hex filename 2150804 116916 53696 2321416 236c08 obj-arm/vmlinux Signed-off-by: Arnd Bergmann Acked-by: Kukjin Kim Cc: Ben Dooks --- arch/arm/configs/tct_hammer_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458bef..71277a1591ba 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y From de9234306bb28fe6c8c3bb908e3f9956f5276a02 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 14:03:33 +0000 Subject: [PATCH 0405/1098] ARM: davinci: remove broken ntosd2_init_i2c ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to be populated with at least one member. gcc correctly warns about the out-of-bounds access here. Since this can not possibly work, it's better to disable i2c support entirely on this board. Without this patch, building davinci_all_defconfig results in: arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init': arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Arnd Bergmann Acked-by: Sekhar Nori Cc: Kevin Hilman Cc: Andrey Porodko --- arch/arm/mach-davinci/board-neuros-osd2.c | 39 ----------------------- 1 file changed, 39 deletions(-) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca9..f6b9fc70161b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); From 9069240480e24a2d6ce23404c9ad6cabf59b7258 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 9 Aug 2012 23:00:02 +0200 Subject: [PATCH 0406/1098] ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP According to compiler warnings, several suspend/resume functions in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add #ifdefs to prevent them from being built in that case. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 4 ++++ drivers/acpi/battery.c | 2 ++ drivers/acpi/button.c | 4 ++++ drivers/acpi/fan.c | 4 ++++ drivers/acpi/power.c | 4 ++++ drivers/acpi/sbs.c | 2 ++ drivers/acpi/thermal.c | 4 ++++ 7 files changed, 24 insertions(+) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index ac7034129f3f..d5fdd36190cc 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -69,7 +69,9 @@ static const struct acpi_device_id ac_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ac_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_ac_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume); static struct acpi_driver acpi_ac_driver = { @@ -313,6 +315,7 @@ static int acpi_ac_add(struct acpi_device *device) return result; } +#ifdef CONFIG_PM_SLEEP static int acpi_ac_resume(struct device *dev) { struct acpi_ac *ac; @@ -332,6 +335,7 @@ static int acpi_ac_resume(struct device *dev) kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); return 0; } +#endif static int acpi_ac_remove(struct acpi_device *device, int type) { diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index ff2c876ec412..45e3e1759fb8 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -1052,6 +1052,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP /* this is needed to learn about changes made in suspended state */ static int acpi_battery_resume(struct device *dev) { @@ -1068,6 +1069,7 @@ static int acpi_battery_resume(struct device *dev) acpi_battery_update(battery); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 79d4c22f7a6d..314a3b84bbc7 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -78,7 +78,9 @@ static int acpi_button_add(struct acpi_device *device); static int acpi_button_remove(struct acpi_device *device, int type); static void acpi_button_notify(struct acpi_device *device, u32 event); +#ifdef CONFIG_PM_SLEEP static int acpi_button_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_button_pm, NULL, acpi_button_resume); static struct acpi_driver acpi_button_driver = { @@ -310,6 +312,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int acpi_button_resume(struct device *dev) { struct acpi_device *device = to_acpi_device(dev); @@ -319,6 +322,7 @@ static int acpi_button_resume(struct device *dev) return acpi_lid_send_state(device); return 0; } +#endif static int acpi_button_add(struct acpi_device *device) { diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 669d9ee80d16..bc36a476f1ab 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -53,8 +53,10 @@ static const struct acpi_device_id fan_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, fan_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_fan_suspend(struct device *dev); static int acpi_fan_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_fan_pm, acpi_fan_suspend, acpi_fan_resume); static struct acpi_driver acpi_fan_driver = { @@ -184,6 +186,7 @@ static int acpi_fan_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_fan_suspend(struct device *dev) { if (!dev) @@ -207,6 +210,7 @@ static int acpi_fan_resume(struct device *dev) return result; } +#endif static int __init acpi_fan_init(void) { diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 215ecd097408..fc1803414629 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -67,7 +67,9 @@ static const struct acpi_device_id power_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, power_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_power_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_power_pm, NULL, acpi_power_resume); static struct acpi_driver acpi_power_driver = { @@ -775,6 +777,7 @@ static int acpi_power_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_power_resume(struct device *dev) { int result = 0, state; @@ -803,6 +806,7 @@ static int acpi_power_resume(struct device *dev) return result; } +#endif int __init acpi_power_init(void) { diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index c0b9aa5faf4c..ff0740e0a9c2 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -988,6 +988,7 @@ static void acpi_sbs_rmdirs(void) #endif } +#ifdef CONFIG_PM_SLEEP static int acpi_sbs_resume(struct device *dev) { struct acpi_sbs *sbs; @@ -997,6 +998,7 @@ static int acpi_sbs_resume(struct device *dev) acpi_sbs_callback(sbs); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_sbs_pm, NULL, acpi_sbs_resume); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9fe90e9fecb5..edda74a43406 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -106,7 +106,9 @@ static const struct acpi_device_id thermal_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, thermal_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_thermal_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_thermal_pm, NULL, acpi_thermal_resume); static struct acpi_driver acpi_thermal_driver = { @@ -1041,6 +1043,7 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_thermal_resume(struct device *dev) { struct acpi_thermal *tz; @@ -1075,6 +1078,7 @@ static int acpi_thermal_resume(struct device *dev) return AE_OK; } +#endif static int thermal_act(const struct dmi_system_id *d) { From 14bc9c6dc694e2d7930802f7afd275de25ef8394 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 10 Aug 2012 13:29:32 +0200 Subject: [PATCH 0407/1098] ALSA: hda - Fix panned "Beep Playback Switch" When "Beep Playback Switch" had a different value on left and right channels (such as muting left but not right, or vice versa), this could result in the right channel being ignored. This patch enables beep to be sounding from right channel only, and also give correct result back to userspace (e g amixer). Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 0bc2315b181d..d26ae65b43b7 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -237,10 +237,9 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep) { + if (beep && !beep->enabled) { ucontrol->value.integer.value[0] = - ucontrol->value.integer.value[1] = - beep->enabled; + ucontrol->value.integer.value[1] = 0; return 0; } return snd_hda_mixer_amp_switch_get(kcontrol, ucontrol); @@ -252,9 +251,18 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep) - snd_hda_enable_beep_device(codec, - *ucontrol->value.integer.value); + if (beep) { + u8 chs = get_amp_channels(kcontrol); + int enable = 0; + long *valp = ucontrol->value.integer.value; + if (chs & 1) { + enable |= *valp; + valp++; + } + if (chs & 2) + enable |= *valp; + snd_hda_enable_beep_device(codec, enable); + } return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep); From e037cb4a54e26b5f55f856e0e7445cfcfb2f3d31 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Fri, 10 Aug 2012 14:11:58 +0200 Subject: [PATCH 0408/1098] ALSA : hda - bug fix on checking the supported power states of a codec The return value of snd_hda_param_read() is -1 for an error, otherwise it's the supported power states of a codec. The supported power states is a 32-bit value. Bit 31 will be set to 1 if the codec supports EPSS, thus making "sup" negative. And the bit 28:5 is reserved as "0". So a negative value other than -1 shall be further checked. Please refer to High-Definition spec 7.3.4.12 "Supported Power States", thanks! Signed-off-by: Mengdong Lin Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 88a9c20eb7a2..629131ad7b8b 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3497,7 +3497,7 @@ static bool snd_hda_codec_get_supported_ps(struct hda_codec *codec, hda_nid_t fg { int sup = snd_hda_param_read(codec, fg, AC_PAR_POWER_STATE); - if (sup < 0) + if (sup == -1) return false; if (sup & power_state) return true; From 3567a4e2c52ce2f6fe74fc85690335ec7c96608e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 9 Aug 2012 23:00:13 +0200 Subject: [PATCH 0409/1098] platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP According to compiler warnings, quite some suspend/resume functions in platform x86 drivers are not used for CONFIG_PM_SLEEP unset, so add #ifdefs to prevent them from being built in that case. Signed-off-by: Rafael J. Wysocki --- drivers/platform/x86/classmate-laptop.c | 4 ++++ drivers/platform/x86/fujitsu-tablet.c | 2 ++ drivers/platform/x86/hdaps.c | 2 ++ drivers/platform/x86/hp_accel.c | 2 +- drivers/platform/x86/msi-laptop.c | 4 ++++ drivers/platform/x86/panasonic-laptop.c | 4 ++++ drivers/platform/x86/sony-laptop.c | 12 +++++++++++- drivers/platform/x86/thinkpad_acpi.c | 2 ++ drivers/platform/x86/toshiba_acpi.c | 2 ++ drivers/platform/x86/toshiba_bluetooth.c | 4 ++++ drivers/platform/x86/xo15-ebook.c | 2 ++ 11 files changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index 2ca7dd1ab3e4..cd33add118ce 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -350,6 +350,7 @@ static void cmpc_accel_idev_init_v4(struct input_dev *inputdev) inputdev->close = cmpc_accel_close_v4; } +#ifdef CONFIG_PM_SLEEP static int cmpc_accel_suspend_v4(struct device *dev) { struct input_dev *inputdev; @@ -384,6 +385,7 @@ static int cmpc_accel_resume_v4(struct device *dev) return 0; } +#endif static int cmpc_accel_add_v4(struct acpi_device *acpi) { @@ -752,6 +754,7 @@ static int cmpc_tablet_remove(struct acpi_device *acpi, int type) return cmpc_remove_acpi_notify_device(acpi); } +#ifdef CONFIG_PM_SLEEP static int cmpc_tablet_resume(struct device *dev) { struct input_dev *inputdev = dev_get_drvdata(dev); @@ -761,6 +764,7 @@ static int cmpc_tablet_resume(struct device *dev) input_report_switch(inputdev, SW_TABLET_MODE, !val); return 0; } +#endif static SIMPLE_DEV_PM_OPS(cmpc_tablet_pm, NULL, cmpc_tablet_resume); diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c index d2e41735a47b..7acae3f85f3b 100644 --- a/drivers/platform/x86/fujitsu-tablet.c +++ b/drivers/platform/x86/fujitsu-tablet.c @@ -440,11 +440,13 @@ static int __devexit acpi_fujitsu_remove(struct acpi_device *adev, int type) return 0; } +#ifdef CONFIG_PM_SLEEP static int acpi_fujitsu_resume(struct device *dev) { fujitsu_reset(); return 0; } +#endif static SIMPLE_DEV_PM_OPS(acpi_fujitsu_pm, NULL, acpi_fujitsu_resume); diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index d9ab6f64dcec..777c7e3dda51 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -305,10 +305,12 @@ static int hdaps_probe(struct platform_device *dev) return 0; } +#ifdef CONFIG_PM_SLEEP static int hdaps_resume(struct device *dev) { return hdaps_device_init(); } +#endif static SIMPLE_DEV_PM_OPS(hdaps_pm, NULL, hdaps_resume); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index f4d91154ad67..6b9af989632b 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -352,7 +352,7 @@ static int lis3lv02d_remove(struct acpi_device *device, int type) } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int lis3lv02d_suspend(struct device *dev) { /* make sure the device is off when we suspend */ diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f64441844317..2111dbb7e1e3 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -85,7 +85,9 @@ #define MSI_STANDARD_EC_TOUCHPAD_ADDRESS 0xe4 #define MSI_STANDARD_EC_TOUCHPAD_MASK (1 << 4) +#ifdef CONFIG_PM_SLEEP static int msi_laptop_resume(struct device *device); +#endif static SIMPLE_DEV_PM_OPS(msi_laptop_pm, NULL, msi_laptop_resume); #define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f @@ -753,6 +755,7 @@ err_bluetooth: return retval; } +#ifdef CONFIG_PM_SLEEP static int msi_laptop_resume(struct device *device) { u8 data; @@ -773,6 +776,7 @@ static int msi_laptop_resume(struct device *device) return 0; } +#endif static int __init msi_laptop_input_setup(void) { diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 24480074bcf0..8e8caa767d6a 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -188,7 +188,9 @@ static const struct acpi_device_id pcc_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, pcc_device_ids); +#ifdef CONFIG_PM_SLEEP static int acpi_pcc_hotkey_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(acpi_pcc_hotkey_pm, NULL, acpi_pcc_hotkey_resume); static struct acpi_driver acpi_pcc_driver = { @@ -540,6 +542,7 @@ static void acpi_pcc_destroy_input(struct pcc_acpi *pcc) /* kernel module interface */ +#ifdef CONFIG_PM_SLEEP static int acpi_pcc_hotkey_resume(struct device *dev) { struct pcc_acpi *pcc; @@ -556,6 +559,7 @@ static int acpi_pcc_hotkey_resume(struct device *dev) return acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode); } +#endif static int acpi_pcc_hotkey_add(struct acpi_device *device) { diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 9363969ad07a..daaddec68def 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -140,7 +140,10 @@ MODULE_PARM_DESC(kbd_backlight_timeout, "1 for 30 seconds, 2 for 60 seconds and 3 to disable timeout " "(default: 0)"); +#ifdef CONFIG_PM_SLEEP static void sony_nc_kbd_backlight_resume(void); +static void sony_nc_thermal_resume(void); +#endif static int sony_nc_kbd_backlight_setup(struct platform_device *pd, unsigned int handle); static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd); @@ -151,7 +154,6 @@ static void sony_nc_battery_care_cleanup(struct platform_device *pd); static int sony_nc_thermal_setup(struct platform_device *pd); static void sony_nc_thermal_cleanup(struct platform_device *pd); -static void sony_nc_thermal_resume(void); static int sony_nc_lid_resume_setup(struct platform_device *pd); static void sony_nc_lid_resume_cleanup(struct platform_device *pd); @@ -1431,6 +1433,7 @@ static void sony_nc_function_cleanup(struct platform_device *pd) sony_nc_handles_cleanup(pd); } +#ifdef CONFIG_PM_SLEEP static void sony_nc_function_resume(void) { unsigned int i, result, bitmask, arg; @@ -1508,6 +1511,7 @@ static int sony_nc_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(sony_nc_pm, NULL, sony_nc_resume); @@ -1872,6 +1876,7 @@ static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd) } } +#ifdef CONFIG_PM_SLEEP static void sony_nc_kbd_backlight_resume(void) { int ignore = 0; @@ -1888,6 +1893,7 @@ static void sony_nc_kbd_backlight_resume(void) (kbdbl_ctl->base + 0x200) | (kbdbl_ctl->timeout << 0x10), &ignore); } +#endif struct battery_care_control { struct device_attribute attrs[2]; @@ -2210,6 +2216,7 @@ static void sony_nc_thermal_cleanup(struct platform_device *pd) } } +#ifdef CONFIG_PM_SLEEP static void sony_nc_thermal_resume(void) { unsigned int status = sony_nc_thermal_mode_get(); @@ -2217,6 +2224,7 @@ static void sony_nc_thermal_resume(void) if (status != th_handle->mode) sony_nc_thermal_mode_set(th_handle->mode); } +#endif /* resume on LID open */ struct snc_lid_resume_control { @@ -4287,6 +4295,7 @@ err_free_resources: return result; } +#ifdef CONFIG_PM_SLEEP static int sony_pic_suspend(struct device *dev) { if (sony_pic_disable(to_acpi_device(dev))) @@ -4300,6 +4309,7 @@ static int sony_pic_resume(struct device *dev) spic_dev.cur_ioport, spic_dev.cur_irq); return 0; } +#endif static SIMPLE_DEV_PM_OPS(sony_pic_pm, sony_pic_suspend, sony_pic_resume); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e7f73287636c..f28f36ccdcf4 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -922,6 +922,7 @@ static struct input_dev *tpacpi_inputdev; static struct mutex tpacpi_inputdev_send_mutex; static LIST_HEAD(tpacpi_all_drivers); +#ifdef CONFIG_PM_SLEEP static int tpacpi_suspend_handler(struct device *dev) { struct ibm_struct *ibm, *itmp; @@ -949,6 +950,7 @@ static int tpacpi_resume_handler(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(tpacpi_pm, tpacpi_suspend_handler, tpacpi_resume_handler); diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index c13ba5bac93f..5f1256d5e933 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -1296,6 +1296,7 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int toshiba_acpi_suspend(struct device *device) { struct toshiba_acpi_dev *dev = acpi_driver_data(to_acpi_device(device)); @@ -1317,6 +1318,7 @@ static int toshiba_acpi_resume(struct device *device) return 0; } +#endif static SIMPLE_DEV_PM_OPS(toshiba_acpi_pm, toshiba_acpi_suspend, toshiba_acpi_resume); diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index 715a43cb5e3c..5e5d6317d690 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -41,7 +41,9 @@ static const struct acpi_device_id bt_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, bt_device_ids); +#ifdef CONFIG_PM_SLEEP static int toshiba_bt_resume(struct device *dev); +#endif static SIMPLE_DEV_PM_OPS(toshiba_bt_pm, NULL, toshiba_bt_resume); static struct acpi_driver toshiba_bt_rfkill_driver = { @@ -90,10 +92,12 @@ static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event) toshiba_bluetooth_enable(device->handle); } +#ifdef CONFIG_PM_SLEEP static int toshiba_bt_resume(struct device *dev) { return toshiba_bluetooth_enable(to_acpi_device(dev)->handle); } +#endif static int toshiba_bt_rfkill_add(struct acpi_device *device) { diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c index 849c07c13bf6..38ba39d7ca7d 100644 --- a/drivers/platform/x86/xo15-ebook.c +++ b/drivers/platform/x86/xo15-ebook.c @@ -77,10 +77,12 @@ static void ebook_switch_notify(struct acpi_device *device, u32 event) } } +#ifdef CONFIG_PM_SLEEP static int ebook_switch_resume(struct device *dev) { return ebook_send_state(to_acpi_device(dev)); } +#endif static SIMPLE_DEV_PM_OPS(ebook_switch_pm, NULL, ebook_switch_resume); From 07368d32f1a67e797def08cf2ee3ea1647b204b6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 9 Aug 2012 23:00:35 +0200 Subject: [PATCH 0410/1098] tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP According to a compiler warning, the tpm_tis_resume() function is not used for CONFIG_PM_SLEEP unset, so add a #ifdef to prevent it from being built in that case. Signed-off-by: Rafael J. Wysocki --- drivers/char/tpm/tpm_tis.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 89682fa8801e..c4be3519a587 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -807,6 +807,7 @@ module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id, MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe"); #endif +#ifdef CONFIG_PM_SLEEP static int tpm_tis_resume(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); @@ -816,6 +817,7 @@ static int tpm_tis_resume(struct device *dev) return tpm_pm_resume(dev); } +#endif static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume); From 8e90e4cc33ac44fd58635dc1aa94d3fd2145e518 Mon Sep 17 00:00:00 2001 From: Zhao Chenhui Date: Tue, 7 Aug 2012 17:12:47 +0800 Subject: [PATCH 0411/1098] powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS Signed-off-by: Zhao Chenhui Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c4577..99a4dd3b30cc 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -115,6 +115,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y From 09a3017a585eb8567a7de15b426bb1dfb548bf0f Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Fri, 10 Aug 2012 18:48:31 +0800 Subject: [PATCH 0412/1098] powerpc/p4080ds: dts - add usb controller version info and port0 Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f694..4f9c9f682ecf 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; From c0db19dabf138741e078f6391fb132821c0d98b5 Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Wed, 8 Aug 2012 17:02:08 +0800 Subject: [PATCH 0413/1098] ARM: mmp: fix potential NULL dereference Fix the wrong logic: we should use || instead of && Cc: Leo Yan Cc: Eric Miao Signed-off-by: Yuanhan Liu Signed-off-by: Haojian Zhuang --- arch/arm/mach-mmp/sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f9519372..7e8a5a2e1ec7 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); From 61f5d61ef94d7082d96494e2a6dd79de2b4437d2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 11:34:43 +0530 Subject: [PATCH 0414/1098] ASoC: Samsung: Fix build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following build error: In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0, from arch/arm/plat-samsung/include/plat/dma-ops.h:17, from arch/arm/plat-samsung/include/plat/dma.h:128, from sound/soc/samsung/pcm.c:23: arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8: error: redefinition of ‘struct s3c2410_dma_client’ arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here make[3]: *** [sound/soc/samsung/pcm.o] Error 1 Signed-off-by: Sachin Kamat Signed-off-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Mark Brown --- sound/soc/samsung/pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index b7b2a1f91425..89b064650f14 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include "dma.h" #include "pcm.h" From 7724a1edbe463b06d4e7831a41149ba095b16c53 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ozan=20=C3=87a=C4=9Flayan?= Date: Fri, 10 Aug 2012 17:25:10 +0300 Subject: [PATCH 0415/1098] USB: ftdi_sio: Add VID/PID for Kondo Serial USB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bc912e5a3beb..5620db6469e5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -811,6 +811,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5661c7e2d415..5dd96ca6c380 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -794,6 +794,13 @@ #define PI_VID 0x1a72 /* Vendor ID */ #define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ +/* + * Kondo Kagaku Co.Ltd. + * http://www.kondo-robot.com/EN + */ +#define KONDO_VID 0x165c +#define KONDO_USB_SERIAL_PID 0x0002 + /* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ From ee6f827df9107139e8960326e49e1376352ced4d Mon Sep 17 00:00:00 2001 From: fangxiaozhi Date: Wed, 8 Aug 2012 09:24:45 +0000 Subject: [PATCH 0416/1098] USB: support the new interfaces of Huawei Data Card devices in option driver In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 279 ++++++++++++++---------------------- 1 file changed, 111 insertions(+), 168 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 08ff9b862049..b09388606dc0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -80,85 +80,9 @@ static void option_instat_callback(struct urb *urb); #define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 -#define HUAWEI_PRODUCT_E600 0x1001 -#define HUAWEI_PRODUCT_E220 0x1003 -#define HUAWEI_PRODUCT_E220BIS 0x1004 -#define HUAWEI_PRODUCT_E1401 0x1401 -#define HUAWEI_PRODUCT_E1402 0x1402 -#define HUAWEI_PRODUCT_E1403 0x1403 -#define HUAWEI_PRODUCT_E1404 0x1404 -#define HUAWEI_PRODUCT_E1405 0x1405 -#define HUAWEI_PRODUCT_E1406 0x1406 -#define HUAWEI_PRODUCT_E1407 0x1407 -#define HUAWEI_PRODUCT_E1408 0x1408 -#define HUAWEI_PRODUCT_E1409 0x1409 -#define HUAWEI_PRODUCT_E140A 0x140A -#define HUAWEI_PRODUCT_E140B 0x140B -#define HUAWEI_PRODUCT_E140C 0x140C -#define HUAWEI_PRODUCT_E140D 0x140D -#define HUAWEI_PRODUCT_E140E 0x140E -#define HUAWEI_PRODUCT_E140F 0x140F -#define HUAWEI_PRODUCT_E1410 0x1410 -#define HUAWEI_PRODUCT_E1411 0x1411 -#define HUAWEI_PRODUCT_E1412 0x1412 -#define HUAWEI_PRODUCT_E1413 0x1413 -#define HUAWEI_PRODUCT_E1414 0x1414 -#define HUAWEI_PRODUCT_E1415 0x1415 -#define HUAWEI_PRODUCT_E1416 0x1416 -#define HUAWEI_PRODUCT_E1417 0x1417 -#define HUAWEI_PRODUCT_E1418 0x1418 -#define HUAWEI_PRODUCT_E1419 0x1419 -#define HUAWEI_PRODUCT_E141A 0x141A -#define HUAWEI_PRODUCT_E141B 0x141B -#define HUAWEI_PRODUCT_E141C 0x141C -#define HUAWEI_PRODUCT_E141D 0x141D -#define HUAWEI_PRODUCT_E141E 0x141E -#define HUAWEI_PRODUCT_E141F 0x141F -#define HUAWEI_PRODUCT_E1420 0x1420 -#define HUAWEI_PRODUCT_E1421 0x1421 -#define HUAWEI_PRODUCT_E1422 0x1422 -#define HUAWEI_PRODUCT_E1423 0x1423 -#define HUAWEI_PRODUCT_E1424 0x1424 -#define HUAWEI_PRODUCT_E1425 0x1425 -#define HUAWEI_PRODUCT_E1426 0x1426 -#define HUAWEI_PRODUCT_E1427 0x1427 -#define HUAWEI_PRODUCT_E1428 0x1428 -#define HUAWEI_PRODUCT_E1429 0x1429 -#define HUAWEI_PRODUCT_E142A 0x142A -#define HUAWEI_PRODUCT_E142B 0x142B -#define HUAWEI_PRODUCT_E142C 0x142C -#define HUAWEI_PRODUCT_E142D 0x142D -#define HUAWEI_PRODUCT_E142E 0x142E -#define HUAWEI_PRODUCT_E142F 0x142F -#define HUAWEI_PRODUCT_E1430 0x1430 -#define HUAWEI_PRODUCT_E1431 0x1431 -#define HUAWEI_PRODUCT_E1432 0x1432 -#define HUAWEI_PRODUCT_E1433 0x1433 -#define HUAWEI_PRODUCT_E1434 0x1434 -#define HUAWEI_PRODUCT_E1435 0x1435 -#define HUAWEI_PRODUCT_E1436 0x1436 -#define HUAWEI_PRODUCT_E1437 0x1437 -#define HUAWEI_PRODUCT_E1438 0x1438 -#define HUAWEI_PRODUCT_E1439 0x1439 -#define HUAWEI_PRODUCT_E143A 0x143A -#define HUAWEI_PRODUCT_E143B 0x143B -#define HUAWEI_PRODUCT_E143C 0x143C -#define HUAWEI_PRODUCT_E143D 0x143D -#define HUAWEI_PRODUCT_E143E 0x143E -#define HUAWEI_PRODUCT_E143F 0x143F #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 -#define HUAWEI_PRODUCT_E14AC 0x14AC -#define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K4605 0x14C6 -#define HUAWEI_PRODUCT_K5005 0x14C8 -#define HUAWEI_PRODUCT_K3770 0x14C9 -#define HUAWEI_PRODUCT_K3771 0x14CA -#define HUAWEI_PRODUCT_K4510 0x14CB -#define HUAWEI_PRODUCT_K4511 0x14CC -#define HUAWEI_PRODUCT_ETS1220 0x1803 -#define HUAWEI_PRODUCT_E353 0x1506 -#define HUAWEI_PRODUCT_E173S 0x1C05 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -615,104 +539,123 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4510, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, From 71a5e61b81191cfb5624add64f925990487d64c0 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 20 Jul 2012 09:33:45 +0200 Subject: [PATCH 0417/1098] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Since commit "5e0aa49 usb: chipidea: use generic map/unmap routines", the udc part of the chipidea driver needs the generic usb gadget helper functions. If the chipidea driver with udc support is built into the kernel and usb gadget is built a module, the linking of the kernel fails with: drivers/built-in.o: In function `_hardware_dequeue': drivers/usb/chipidea/udc.c:527: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1269: undefined reference to `usb_gadget_unmap_request' drivers/usb/chipidea/udc.c:1821: undefined reference to `usb_del_gadget_udc' drivers/usb/chipidea/udc.c:443: undefined reference to `usb_gadget_map_request' drivers/usb/chipidea/udc.c:1774: undefined reference to `usb_add_gadget_udc' This patch changes the dependencies, so that udc support can only be activated if the linux gadget support (USB_GADGET) is builtin or both chipidea driver and USB_GADGET are modular. Same dependencies for the chipidea host support and the linux host side USB support (USB). While there, fix the indention of chipidea the help text. Cc: Alexander Shishkin Reviewed-by: Felipe Balbi Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 8337fb5d988d..47e499c9c0b6 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,9 +1,9 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on USB + depends on USB || USB_GADGET help - Say Y here if your system has a dual role high speed USB - controller based on ChipIdea silicon IP. Currently, only the + Say Y here if your system has a dual role high speed USB + controller based on ChipIdea silicon IP. Currently, only the peripheral mode is supported. When compiled dynamically, the module will be called ci-hdrc.ko. @@ -12,7 +12,7 @@ if USB_CHIPIDEA config USB_CHIPIDEA_UDC bool "ChipIdea device controller" - depends on USB_GADGET + depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA select USB_GADGET_DUALSPEED help Say Y here to enable device controller functionality of the @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + depends on USB=y || USB=USB_CHIPIDEA select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the From 872c495dd0f9d1f48814a8ee80c2c7b3b7c3b4d9 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Fri, 20 Jul 2012 15:13:35 +0530 Subject: [PATCH 0418/1098] OMAP: USB : Fix the EHCI enumeration and core retention issue This commit 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" is causing the usb hub and device detection fails in beagle XM causeing NFS not functional. This affects the core retention too. The same commit logic needs to be revisted adhering to hwmod and device tree framework. for now, this commit id 354ab8567ae3107a8cbe7228c3181990ba598aac titled "Fix OMAP EHCI suspend/resume failure (i693)" reverted. This patch is validated on BeagleXM with NFS support over usb ethernet and USB mass storage and other device detection. Signed-off-by: Keshava Munegowda Acked-by: Felipe Balbi Cc: stable # 3.5 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 167 +---------------------------------- 1 file changed, 1 insertion(+), 166 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bb55eb4a7d48..d7fe287d0678 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -56,15 +56,6 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Errata i693 */ -static struct clk *utmi_p1_fck; -static struct clk *utmi_p2_fck; -static struct clk *xclk60mhsp1_ck; -static struct clk *xclk60mhsp2_ck; -static struct clk *usbhost_p1_fck; -static struct clk *usbhost_p2_fck; -static struct clk *init_60m_fclk; - /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -80,40 +71,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } -/* Erratum i693 workaround sequence */ -static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) -{ - int ret = 0; - - /* Switch to the internal 60 MHz clock */ - ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); - if (ret != 0) - ehci_err(ehci, "init_60m_fclk set parent" - "failed error:%d\n", ret); - - clk_enable(usbhost_p1_fck); - clk_enable(usbhost_p2_fck); - - /* Wait 1ms and switch back to the external clock */ - mdelay(1); - ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); - - ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); - if (ret != 0) - ehci_err(ehci, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); - - clk_disable(usbhost_p1_fck); - clk_disable(usbhost_p2_fck); -} static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) { @@ -195,50 +152,6 @@ static int omap_ehci_init(struct usb_hcd *hcd) return rc; } -static int omap_ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 temp; - unsigned long flags; - int retval = 0; - - spin_lock_irqsave(&ehci->lock, flags); - - if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { - temp = ehci_readl(ehci, status_reg); - if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { - retval = -EPIPE; - goto done; - } - - temp &= ~PORT_WKCONN_E; - temp |= PORT_WKDISC_E | PORT_WKOC_E; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - - omap_ehci_erratum_i693(ehci); - - set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); - goto done; - } - - spin_unlock_irqrestore(&ehci->lock, flags); - - /* Handle the hub control events here */ - return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); -done: - spin_unlock_irqrestore(&ehci->lock, flags); - return retval; -} - static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -351,79 +264,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } - /* get clocks */ - utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(utmi_p1_fck)) { - ret = PTR_ERR(utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_add_hcd; - } - - xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); - if (IS_ERR(xclk60mhsp1_ck)) { - ret = PTR_ERR(xclk60mhsp1_ck); - dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(utmi_p2_fck)) { - ret = PTR_ERR(utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; - } - - xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); - if (IS_ERR(xclk60mhsp2_ck)) { - ret = PTR_ERR(xclk60mhsp2_ck); - dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(usbhost_p1_fck)) { - ret = PTR_ERR(usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(usbhost_p2_fck)) { - ret = PTR_ERR(usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; - } - - init_60m_fclk = clk_get(dev, "init_60m_fclk"); - if (IS_ERR(init_60m_fclk)) { - ret = PTR_ERR(init_60m_fclk); - dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; - } return 0; -err_usbhost_p2_fck: - clk_put(usbhost_p2_fck); - -err_usbhost_p1_fck: - clk_put(usbhost_p1_fck); - -err_xclk60mhsp2_ck: - clk_put(xclk60mhsp2_ck); - -err_utmi_p2_fck: - clk_put(utmi_p2_fck); - -err_xclk60mhsp1_ck: - clk_put(xclk60mhsp1_ck); - -err_utmi_p1_fck: - clk_put(utmi_p1_fck); - -err_add_hcd: - usb_remove_hcd(hcd); - err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -454,14 +297,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) iounmap(hcd->regs); usb_put_hcd(hcd); - clk_put(utmi_p1_fck); - clk_put(utmi_p2_fck); - clk_put(xclk60mhsp1_ck); - clk_put(xclk60mhsp2_ck); - clk_put(usbhost_p1_fck); - clk_put(usbhost_p2_fck); - clk_put(init_60m_fclk); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -532,7 +367,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = omap_ehci_hub_control, + .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, From 4840ae17ba7e21f2932120383a2c9a0f30e66123 Mon Sep 17 00:00:00 2001 From: Bruno Morelli Date: Mon, 30 Jul 2012 15:26:50 +0200 Subject: [PATCH 0419/1098] USB: isp1362-hcd.c: usb message always saved in case of underrun The usb message must be saved also in case the USB endpoint is not a control endpoint (i.e., "endpoint 0"), otherwise in some circumstances we don't have a payload in case of error. The patch has been created by tracing with usbmon the different error messages generated by this driver with respect to the ehci-hcd driver. Signed-off-by: Bruno Morelli Signed-off-by: Claudio Scordino Tested-by: Bruno Morelli Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1362-hcd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 2ed112d3e159..256326322cfd 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -543,12 +543,12 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, short_ok ? "" : "not_", PTD_GET_COUNT(ptd), ep->maxpacket, len); + /* save the data underrun error code for later and + * proceed with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; - /* save the data underrun error code for later and - * proceed with the status stage - */ - urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); if (urb->status == -EINPROGRESS) From f41a9b3b15e0f74656f69e6da403d870c53ea4e6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 8 Aug 2012 16:25:03 +0200 Subject: [PATCH 0420/1098] ath9k: fix interrupt storms on queued hardware reset commit b74713d04effbacd3d126ce94cec18742187b6ce "ath9k: Handle fatal interrupts properly" introduced a race condition, where IRQs are being left enabled, however the irq handler returns IRQ_HANDLED while the reset is still queued without addressing the IRQ cause. This leads to an IRQ storm that prevents the system from even getting to the reset code. Fix this by disabling IRQs in the handler without touching intr_ref_cnt. Cc: Rajkumar Manoharan Cc: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 18 ++++++++++++------ drivers/net/wireless/ath/ath9k/mac.h | 1 + drivers/net/wireless/ath/ath9k/main.c | 4 +++- 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 7990cd55599c..b42be910a83d 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -773,15 +773,10 @@ bool ath9k_hw_intrpend(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_intrpend); -void ath9k_hw_disable_interrupts(struct ath_hw *ah) +void ath9k_hw_kill_interrupts(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); - if (!(ah->imask & ATH9K_INT_GLOBAL)) - atomic_set(&ah->intr_ref_cnt, -1); - else - atomic_dec(&ah->intr_ref_cnt); - ath_dbg(common, INTERRUPT, "disable IER\n"); REG_WRITE(ah, AR_IER, AR_IER_DISABLE); (void) REG_READ(ah, AR_IER); @@ -793,6 +788,17 @@ void ath9k_hw_disable_interrupts(struct ath_hw *ah) (void) REG_READ(ah, AR_INTR_SYNC_ENABLE); } } +EXPORT_SYMBOL(ath9k_hw_kill_interrupts); + +void ath9k_hw_disable_interrupts(struct ath_hw *ah) +{ + if (!(ah->imask & ATH9K_INT_GLOBAL)) + atomic_set(&ah->intr_ref_cnt, -1); + else + atomic_dec(&ah->intr_ref_cnt); + + ath9k_hw_kill_interrupts(ah); +} EXPORT_SYMBOL(ath9k_hw_disable_interrupts); void ath9k_hw_enable_interrupts(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 0eba36dca6f8..4a745e68dd94 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -738,6 +738,7 @@ bool ath9k_hw_intrpend(struct ath_hw *ah); void ath9k_hw_set_interrupts(struct ath_hw *ah); void ath9k_hw_enable_interrupts(struct ath_hw *ah); void ath9k_hw_disable_interrupts(struct ath_hw *ah); +void ath9k_hw_kill_interrupts(struct ath_hw *ah); void ar9002_hw_attach_mac_ops(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6049d8b82855..a22df749b8db 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -462,8 +462,10 @@ irqreturn_t ath_isr(int irq, void *dev) if (!ath9k_hw_intrpend(ah)) return IRQ_NONE; - if(test_bit(SC_OP_HW_RESET, &sc->sc_flags)) + if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) { + ath9k_hw_kill_interrupts(ah); return IRQ_HANDLED; + } /* * Figure out the reason(s) for the interrupt. Note From 60f53cf99060472973f16452116d9c467f8b08c6 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 19:44:21 +0400 Subject: [PATCH 0421/1098] rndis_wlan: Fix potential memory leak in update_pmkid() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 241162e8111d..7a4ae9ee1c63 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1803,6 +1803,7 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, struct cfg80211_pmksa *pmksa, int max_pmkids) { + struct ndis_80211_pmkid *new_pmkids; int i, err, newlen; unsigned int count; @@ -1833,11 +1834,12 @@ static struct ndis_80211_pmkid *update_pmkid(struct usbnet *usbdev, /* add new pmkid */ newlen = sizeof(*pmkids) + (count + 1) * sizeof(pmkids->bssid_info[0]); - pmkids = krealloc(pmkids, newlen, GFP_KERNEL); - if (!pmkids) { + new_pmkids = krealloc(pmkids, newlen, GFP_KERNEL); + if (!new_pmkids) { err = -ENOMEM; goto error; } + pmkids = new_pmkids; pmkids->length = cpu_to_le32(newlen); pmkids->bssid_info_count = cpu_to_le32(count + 1); From 5d774b74ef7d0428a3e45c9bb5b3a0915d2240cb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 9 Aug 2012 09:57:30 +0300 Subject: [PATCH 0422/1098] wireless: at76c50x: signedness bug in at76_dfu_get_state() This return holds the number of bytes transfered (1 byte) or a negative error code. The type should be int instead of u8. Signed-off-by: Dan Carpenter Acked-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index efc162e0b511..88b8d64c90f1 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -342,7 +342,7 @@ static int at76_dfu_get_status(struct usb_device *udev, return ret; } -static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state) +static int at76_dfu_get_state(struct usb_device *udev, u8 *state) { int ret; From e19f15ac6437624b6214b2f0ec0d69fb7eb205fa Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 9 Aug 2012 12:37:26 +0530 Subject: [PATCH 0423/1098] ath9k: stop btcoex on device suspend During suspend, the device will be moved to FULLSLEEP state. As btcoex is never been stopped, the btcoex timer is running and tries to access hw on fullsleep state. Fix that. Cc: stable@vger.kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index d455de9162ec..a978984d78a5 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -321,6 +321,7 @@ static int ath_pci_suspend(struct device *device) * Otherwise the chip never moved to full sleep, * when no interface is up. */ + ath9k_stop_btcoex(sc); ath9k_hw_disable(sc->sc_ah); ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); From 5c263b92f828af6a8cf54041db45ceae5af8f2ab Mon Sep 17 00:00:00 2001 From: Mark Ferrell Date: Tue, 24 Jul 2012 14:15:13 -0500 Subject: [PATCH 0424/1098] usb: serial: mos7840: Fixup mos7840_chars_in_buffer() * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 57eca2448424..009c1d99e146 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1232,9 +1232,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) return 0; spin_lock_irqsave(&mos7840_port->pool_lock, flags); - for (i = 0; i < NUM_URBS; ++i) - if (mos7840_port->busy[i]) - chars += URB_TRANSFER_BUFFER_SIZE; + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->busy[i]) { + struct urb *urb = mos7840_port->write_urb_pool[i]; + chars += urb->transfer_buffer_length; + } + } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); dbg("%s - returns %d", __func__, chars); return chars; From a1028f0abfb321e0f87c10ac0cce8508097c2b42 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 27 Jul 2012 01:11:41 +0200 Subject: [PATCH 0425/1098] usb: usb_wwan: replace release and disconnect with a port_remove hook MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doing port specific cleanup in the .port_remove hook is a lot simpler and safer than doing it in the USB driver .release or .disconnect methods. The removal of the port from the usb-serial bus will happen before the USB driver cleanup, so we must be careful about accessing port specific driver data from any USB driver functions. This problem surfaced after the commit 0998d0631 device-core: Ensure drvdata = NULL when no driver is bound which turned the previous unsafe access into a reliable NULL pointer dereference. Fixes the following Oops: [ 243.148471] BUG: unable to handle kernel NULL pointer dereference at (null) [ 243.148508] IP: [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.148556] PGD 79d60067 PUD 79d61067 PMD 0 [ 243.148590] Oops: 0000 [#1] SMP [ 243.148617] Modules linked in: sr_mod cdrom qmi_wwan usbnet option cdc_wdm usb_wwan usbserial usb_storage uas fuse af_packet ip6table_filter ip6_tables iptable_filter ip_tables x_tables tun edd cpufreq_conservative cpufreq_userspace cpufreq_powersave snd_pcm_oss snd_mixer_oss acpi_cpufreq snd_seq mperf snd_seq_device coretemp arc4 sg hp_wmi sparse_keymap uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops rtl8192ce rtl8192c_common rtlwifi joydev pcspkr microcode mac80211 i2c_i801 lpc_ich r8169 snd_hda_codec_idt cfg80211 snd_hda_intel snd_hda_codec rfkill snd_hwdep snd_pcm wmi snd_timer ac snd soundcore snd_page_alloc battery uhci_hcd i915 drm_kms_helper drm i2c_algo_bit ehci_hcd thermal usbcore video usb_common button processor thermal_sys [ 243.149007] CPU 1 [ 243.149027] Pid: 135, comm: khubd Not tainted 3.5.0-rc7-next-20120720-1-vanilla #1 Hewlett-Packard HP Mini 110-3700 /1584 [ 243.149072] RIP: 0010:[] [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.149118] RSP: 0018:ffff880037e75b30 EFLAGS: 00010286 [ 243.149133] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88005912aa28 [ 243.149150] RDX: ffff88005e95f028 RSI: 0000000000000000 RDI: ffff88005f7c1a10 [ 243.149166] RBP: ffff880037e75b60 R08: 0000000000000000 R09: ffffffff812cea90 [ 243.149182] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88006539b440 [ 243.149198] R13: ffff88006539b440 R14: 0000000000000000 R15: 0000000000000000 [ 243.149216] FS: 0000000000000000(0000) GS:ffff88007ee80000(0000) knlGS:0000000000000000 [ 243.149233] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 243.149248] CR2: 0000000000000000 CR3: 0000000079fe0000 CR4: 00000000000007e0 [ 243.149264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 243.149280] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 243.149298] Process khubd (pid: 135, threadinfo ffff880037e74000, task ffff880037d40600) [ 243.149313] Stack: [ 243.149323] ffff880037e75b40 ffff88006539b440 ffff8800799bc830 ffff88005f7c1800 [ 243.149348] 0000000000000001 ffff88006539b448 ffff880037e75b70 ffffffffa04685e9 [ 243.149371] ffff880037e75bc0 ffffffffa0473765 ffff880037354988 ffff88007b594800 [ 243.149395] Call Trace: [ 243.149419] [] usb_wwan_disconnect+0x9/0x10 [usb_wwan] [ 243.149447] [] usb_serial_disconnect+0xd5/0x120 [usbserial] [ 243.149511] [] usb_unbind_interface+0x58/0x1a0 [usbcore] [ 243.149545] [] __device_release_driver+0x77/0xe0 [ 243.149567] [] device_release_driver+0x27/0x40 [ 243.149587] [] bus_remove_device+0xdf/0x150 [ 243.149608] [] device_del+0x118/0x1a0 [ 243.149661] [] usb_disable_device+0xb0/0x280 [usbcore] [ 243.149718] [] usb_disconnect+0x9d/0x140 [usbcore] [ 243.149770] [] hub_port_connect_change+0xad/0x8a0 [usbcore] [ 243.149825] [] ? usb_control_msg+0xe5/0x110 [usbcore] [ 243.149878] [] hub_events+0x473/0x760 [usbcore] [ 243.149931] [] hub_thread+0x35/0x1d0 [usbcore] [ 243.149955] [] ? add_wait_queue+0x60/0x60 [ 243.150004] [] ? hub_events+0x760/0x760 [usbcore] [ 243.150026] [] kthread+0x8e/0xa0 [ 243.150047] [] kernel_thread_helper+0x4/0x10 [ 243.150068] [] ? flush_kthread_work+0x120/0x120 [ 243.150088] [] ? gs_change+0xb/0xb [ 243.150101] Code: fd 41 54 53 48 83 ec 08 80 7f 1a 00 74 57 49 89 fc 31 db 90 49 8b 7c 24 20 45 31 f6 48 81 c7 10 02 00 00 e8 bc 64 f3 e0 49 89 c7 <4b> 8b 3c 37 49 83 c6 08 e8 4c a5 bd ff 49 83 fe 20 75 ed 45 30 [ 243.150257] RIP [] stop_read_write_urbs+0x37/0x80 [usb_wwan] [ 243.150282] RSP [ 243.150294] CR2: 0000000000000000 [ 243.177170] ---[ end trace fba433d9015ffb8c ]--- Reported-by: Dan Carpenter Reported-by: Thomas Schäfer Suggested-by: Alan Stern Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipw.c | 3 +- drivers/usb/serial/option.c | 4 +-- drivers/usb/serial/qcserial.c | 5 ++- drivers/usb/serial/usb-wwan.h | 3 +- drivers/usb/serial/usb_wwan.c | 66 ++++++++++++++--------------------- 5 files changed, 32 insertions(+), 49 deletions(-) diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5811d34b6c6b..2cb30c535839 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -227,7 +227,6 @@ static void ipw_release(struct usb_serial *serial) { struct usb_wwan_intf_private *data = usb_get_serial_data(serial); - usb_wwan_release(serial); usb_set_serial_data(serial, NULL); kfree(data); } @@ -309,12 +308,12 @@ static struct usb_serial_driver ipw_device = { .description = "IPWireless converter", .id_table = id_table, .num_ports = 1, - .disconnect = usb_wwan_disconnect, .open = ipw_open, .close = ipw_close, .probe = ipw_probe, .attach = usb_wwan_startup, .release = ipw_release, + .port_remove = usb_wwan_port_remove, .dtr_rts = ipw_dtr_rts, .write = usb_wwan_write, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b09388606dc0..99306281dcba 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1240,8 +1240,8 @@ static struct usb_serial_driver option_1port_device = { .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = option_release, + .port_remove = usb_wwan_port_remove, .read_int_callback = option_instat_callback, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, @@ -1357,8 +1357,6 @@ static void option_release(struct usb_serial *serial) struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct option_private *priv = intfdata->private; - usb_wwan_release(serial); - kfree(priv); kfree(intfdata); } diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 8d103019d6aa..314ae8ceba41 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -262,8 +262,7 @@ static void qc_release(struct usb_serial *serial) { struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); - /* Call usb_wwan release & free the private data allocated in qcprobe */ - usb_wwan_release(serial); + /* Free the private data allocated in qcprobe */ usb_set_serial_data(serial, NULL); kfree(priv); } @@ -283,8 +282,8 @@ static struct usb_serial_driver qcdevice = { .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, .attach = usb_wwan_startup, - .disconnect = usb_wwan_disconnect, .release = qc_release, + .port_remove = usb_wwan_port_remove, #ifdef CONFIG_PM .suspend = usb_wwan_suspend, .resume = usb_wwan_resume, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index c47b6ec03063..1f034d2397c6 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -9,8 +9,7 @@ extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); extern void usb_wwan_close(struct usb_serial_port *port); extern int usb_wwan_startup(struct usb_serial *serial); -extern void usb_wwan_disconnect(struct usb_serial *serial); -extern void usb_wwan_release(struct usb_serial *serial); +extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); extern void usb_wwan_set_termios(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index f35971dff4a5..7d0811335b9a 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -565,6 +565,33 @@ bail_out_error: } EXPORT_SYMBOL(usb_wwan_startup); +int usb_wwan_port_remove(struct usb_serial_port *port) +{ + int i; + struct usb_wwan_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + + /* Stop reading/writing urbs and free them */ + for (i = 0; i < N_IN_URB; i++) { + usb_kill_urb(portdata->in_urbs[i]); + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + for (i = 0; i < N_OUT_URB; i++) { + usb_kill_urb(portdata->out_urbs[i]); + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); + } + + /* Now free port private data */ + kfree(portdata); + return 0; +} +EXPORT_SYMBOL(usb_wwan_port_remove); + +#ifdef CONFIG_PM static void stop_read_write_urbs(struct usb_serial *serial) { int i, j; @@ -582,45 +609,6 @@ static void stop_read_write_urbs(struct usb_serial *serial) } } -void usb_wwan_disconnect(struct usb_serial *serial) -{ - stop_read_write_urbs(serial); -} -EXPORT_SYMBOL(usb_wwan_disconnect); - -void usb_wwan_release(struct usb_serial *serial) -{ - int i, j; - struct usb_serial_port *port; - struct usb_wwan_port_private *portdata; - - /* Now free them */ - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - - for (j = 0; j < N_IN_URB; j++) { - usb_free_urb(portdata->in_urbs[j]); - free_page((unsigned long) - portdata->in_buffer[j]); - portdata->in_urbs[j] = NULL; - } - for (j = 0; j < N_OUT_URB; j++) { - usb_free_urb(portdata->out_urbs[j]); - kfree(portdata->out_buffer[j]); - portdata->out_urbs[j] = NULL; - } - } - - /* Now free per port private data */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - kfree(usb_get_serial_port_data(port)); - } -} -EXPORT_SYMBOL(usb_wwan_release); - -#ifdef CONFIG_PM int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_wwan_intf_private *intfdata = serial->private; From d5fd650cfc7ffeca4af0da939293c8e7a5aa7c36 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 27 Jul 2012 01:11:42 +0200 Subject: [PATCH 0426/1098] usb: serial: prevent suspend/resume from racing against probe/remove MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some usb-serial drivers may access port data in their suspend/ resume functions. Such drivers must always verify the validity of the data as both suspend and resume can be called both before usb_serial_device_probe and after usb_serial_device_remove. But the port data may be invalidated during port_probe and port_remove. This patch prevents the race against suspend and resume by disabling suspend while port_probe or port_remove is running. Suggested-by: Alan Stern Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f398d1e34474..c15f2e7cefc7 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -61,18 +61,23 @@ static int usb_serial_device_probe(struct device *dev) goto exit; } + /* make sure suspend/resume doesn't race against port_probe */ + retval = usb_autopm_get_interface(port->serial->interface); + if (retval) + goto exit; + driver = port->serial->type; if (driver->port_probe) { retval = driver->port_probe(port); if (retval) - goto exit; + goto exit_with_autopm; } retval = device_create_file(dev, &dev_attr_port_number); if (retval) { if (driver->port_remove) retval = driver->port_remove(port); - goto exit; + goto exit_with_autopm; } minor = port->number; @@ -81,6 +86,8 @@ static int usb_serial_device_probe(struct device *dev) "%s converter now attached to ttyUSB%d\n", driver->description, minor); +exit_with_autopm: + usb_autopm_put_interface(port->serial->interface); exit: return retval; } @@ -96,6 +103,9 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; + /* make sure suspend/resume doesn't race against port_remove */ + usb_autopm_get_interface(port->serial->interface); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; @@ -107,6 +117,7 @@ static int usb_serial_device_remove(struct device *dev) dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); + usb_autopm_put_interface(port->serial->interface); return retval; } From 032129cb03df196c4216a82295e6555539da4ce7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 27 Jul 2012 01:11:43 +0200 Subject: [PATCH 0427/1098] usb: usb_wwan: resume/suspend can be called after port is gone MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We cannot unconditionally access any usb-serial port specific data from the interface driver. Both supending and resuming may happen after the port has been removed and portdata is freed. Treat ports with no portdata as closed ports to avoid a NULL pointer dereference on resume. No need to kill URBs for removed ports on suspend, avoiding the same NULL pointer reference there. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 7d0811335b9a..6855d5ed0331 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -602,6 +602,8 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; for (j = 0; j < N_IN_URB; j++) usb_kill_urb(portdata->in_urbs[j]); for (j = 0; j < N_OUT_URB; j++) @@ -700,7 +702,7 @@ int usb_wwan_resume(struct usb_serial *serial) /* skip closed ports */ spin_lock_irq(&intfdata->susp_lock); - if (!portdata->opened) { + if (!portdata || !portdata->opened) { spin_unlock_irq(&intfdata->susp_lock); continue; } From 61eee9a72e40551b8ee7c4d06f4e7a3f3549d296 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 1 Aug 2012 14:32:55 +0200 Subject: [PATCH 0428/1098] update MAINTAINERS for Oliver Neukum my neukum.name address has run out Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f71e94..e7e8eda91d9a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2212,7 +2212,7 @@ S: Maintained F: drivers/scsi/tmscsim.* DC395x SCSI driver -M: Oliver Neukum +M: Oliver Neukum M: Ali Akcaagac M: Jamie Lenehan W: http://twibble.org/dist/dc395x/ @@ -4533,7 +4533,7 @@ S: Supported F: arch/microblaze/ MICROTEK X6 SCANNER -M: Oliver Neukum +M: Oliver Neukum S: Maintained F: drivers/usb/image/microtek.* @@ -7071,7 +7071,7 @@ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h USB ACM DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: Documentation/usb/acm.txt @@ -7092,7 +7092,7 @@ S: Supported F: drivers/block/ub.c USB CDC ETHERNET DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/net/usb/cdc_*.c @@ -7165,7 +7165,7 @@ F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/kl5kusb105.* From e7ae64c7545f48ae8672ae5026710794bc069979 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:44:07 -0700 Subject: [PATCH 0429/1098] usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume suspend/resume will failed on renesas_usbhs without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_host.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 1834cf50888c..9b69a1323294 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1266,6 +1266,12 @@ static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, return ret; } +static int usbhsh_bus_nop(struct usb_hcd *hcd) +{ + /* nothing to do */ + return 0; +} + static struct hc_driver usbhsh_driver = { .description = usbhsh_hcd_name, .hcd_priv_size = sizeof(struct usbhsh_hpriv), @@ -1290,6 +1296,8 @@ static struct hc_driver usbhsh_driver = { */ .hub_status_data = usbhsh_hub_status_data, .hub_control = usbhsh_hub_control, + .bus_suspend = usbhsh_bus_nop, + .bus_resume = usbhsh_bus_nop, }; /* From 5b50d3b52601651ef3183cfb33d03cf486180e48 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:44:43 -0700 Subject: [PATCH 0430/1098] usb: renesas_usbhs: fixup resume method for autonomy mode If renesas_usbhs is probed as autonomy mode, phy reset should be called after power resumed, and manual cold-plug should be called with slight delay. Signed-off-by: Kuninori Morimoto Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8c9bb1ad3069..681da06170c2 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -603,12 +603,12 @@ static int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - usbhs_platform_call(priv, phy_reset, pdev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) usbhsc_power_ctrl(priv, 1); - usbhsc_hotplug(priv); + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_drvcllbck_notify_hotplug(pdev); return 0; } From cc59c7a9633a2d68d8bf908e4e45571d10e08117 Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Mon, 6 Aug 2012 17:29:31 -0500 Subject: [PATCH 0431/1098] usb: host: mips: sead3: Update for EHCI register structure. One line fix after 'struct ehci_regs' definition was changed in commit a46af4ebf9ffec35eea0390e89935197b833dc61 (USB: EHCI: define extension registers like normal ones). Signed-off-by: Steven J. Hill Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sead3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index 58c96bd50d22..0c9e43cfaff5 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -40,7 +40,7 @@ static int ehci_sead3_setup(struct usb_hcd *hcd) ehci->need_io_watchdog = 0; /* Set burst length to 16 words. */ - ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + ehci_writel(ehci, 0x1010, &ehci->regs->reserved1[1]); return ret; } From ecc8a0cdca18df5c9a7e84ab29160259123f3ae5 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Fri, 10 Aug 2012 11:42:43 +0530 Subject: [PATCH 0432/1098] usb: host: tegra: fix warning messages in ehci_remove Existing implementation of tegra_ehci_remove() calls usb_put_hcd(hcd) first and then iounmap(hcd->regs). usb_put_hcd() implementation calls hcd_release() which frees up memory allocated for hcd. As iounmap is trying to unmap hcd->regs, after hcd getting freed up, warning messages were observed during unload of USB. Hence fixing it. Signed-off-by: Venu Byravarasu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 950e95efa381..26dedb30ad0b 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -799,11 +799,12 @@ static int tegra_ehci_remove(struct platform_device *pdev) #endif usb_remove_hcd(hcd); - usb_put_hcd(hcd); tegra_usb_phy_close(tegra->phy); iounmap(hcd->regs); + usb_put_hcd(hcd); + clk_disable_unprepare(tegra->clk); clk_put(tegra->clk); From b1b552a69b8805e7e338074a9e8b670b4a795218 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 8 Aug 2012 11:48:10 +0200 Subject: [PATCH 0433/1098] usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop This patch fixes an issue introduced by patch: 72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep Without this patch we see a kworker taking 100% CPU, after this sequence: - Connect gadget to a windows host - load g_ether - ifconfig up ; ifconfig down; ifconfig up - ping The "ifconfig down" results in calling eth_stop(), which will call usb_ep_disable() and, if the carrier is still ok, usb_ep_enable(): usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } The ep should stay enabled, but will not, as ep_disable set the desc pointer to NULL, therefore the subsequent ep_enable will fail. This leads to permanent rescheduling of the eth_work() worker as usb_ep_queue() (called by the worker) will fail due to the unconfigured endpoint. We fix this issue by saving the ep descriptors and re-assign them before usb_ep_enable(). Cc: Tatyana Brokhman Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/u_ether.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 90e82e288eb9..0e5230926154 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -669,6 +669,8 @@ static int eth_stop(struct net_device *net) spin_lock_irqsave(&dev->lock, flags); if (dev->port_usb) { struct gether *link = dev->port_usb; + const struct usb_endpoint_descriptor *in; + const struct usb_endpoint_descriptor *out; if (link->close) link->close(link); @@ -682,10 +684,14 @@ static int eth_stop(struct net_device *net) * their own pace; the network stack can handle old packets. * For the moment we leave this here, since it works. */ + in = link->in_ep->desc; + out = link->out_ep->desc; usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { DBG(dev, "host still using in/out endpoints\n"); + link->in_ep->desc = in; + link->out_ep->desc = out; usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } From df7fba66471c6bbbaebb55e1bb3658eb7ce00a9b Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Fri, 3 Aug 2012 08:26:45 +0000 Subject: [PATCH 0434/1098] IB/mlx4: Fix possible deadlock on sm_lock spinlock The sm_lock spinlock is taken in the process context by mlx4_ib_modify_device, and in the interrupt context by update_sm_ah, so we need to take that spinlock with irqsave, and release it with irqrestore. Lockdeps reports this as follows: [ INFO: inconsistent lock state ] 3.5.0+ #20 Not tainted inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&ibdev->sm_lock)->rlock){?.+...}, at: [] update_sm_ah+0xad/0x100 [mlx4_ib] {HARDIRQ-ON-W} state was registered at: [] mark_irqflags+0x120/0x190 [] __lock_acquire+0x307/0x4c0 [] lock_acquire+0xb1/0x150 [] _raw_spin_lock+0x41/0x50 [] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib] [] ib_modify_device+0x1c/0x20 [ib_core] [] set_node_desc+0x83/0xc0 [ib_core] [] dev_attr_store+0x20/0x30 [] sysfs_write_file+0xe6/0x170 [] vfs_write+0xc8/0x190 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b ... *** DEADLOCK *** 1 lock held by swapper/0/0: stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20 Call Trace: [] print_usage_bug+0x18a/0x190 [] ? print_irq_inversion_bug+0x210/0x210 [] mark_lock_irq+0xf2/0x280 [] mark_lock+0x150/0x240 [] mark_irqflags+0x16f/0x190 [] __lock_acquire+0x307/0x4c0 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] lock_acquire+0xb1/0x150 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] _raw_spin_lock+0x41/0x50 [] ? update_sm_ah+0xad/0x100 [mlx4_ib] [] ? ib_create_ah+0x1a/0x40 [ib_core] [] update_sm_ah+0xad/0x100 [mlx4_ib] [] ? is_module_address+0x23/0x30 [] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib] [] mlx4_ib_event+0x117/0x160 [mlx4_ib] [] ? _raw_spin_lock_irqsave+0x61/0x70 [] mlx4_dispatch_event+0x6c/0x90 [mlx4_core] [] mlx4_eq_int+0x500/0x950 [mlx4_core] Reported by: Or Gerlitz Tested-by: Bart Van Assche Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mad.c | 16 ++++++++++------ drivers/infiniband/hw/mlx4/main.c | 5 +++-- 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index c27141fef1ab..9c2ae7efd00f 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -125,6 +125,7 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) { struct ib_ah *new_ah; struct ib_ah_attr ah_attr; + unsigned long flags; if (!dev->send_agent[port_num - 1][0]) return; @@ -139,11 +140,11 @@ static void update_sm_ah(struct mlx4_ib_dev *dev, u8 port_num, u16 lid, u8 sl) if (IS_ERR(new_ah)) return; - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); if (dev->sm_ah[port_num - 1]) ib_destroy_ah(dev->sm_ah[port_num - 1]); dev->sm_ah[port_num - 1] = new_ah; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); } /* @@ -197,13 +198,15 @@ static void smp_snoop(struct ib_device *ibdev, u8 port_num, struct ib_mad *mad, static void node_desc_override(struct ib_device *dev, struct ib_mad *mad) { + unsigned long flags; + if ((mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_LID_ROUTED || mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) && mad->mad_hdr.method == IB_MGMT_METHOD_GET_RESP && mad->mad_hdr.attr_id == IB_SMP_ATTR_NODE_DESC) { - spin_lock(&to_mdev(dev)->sm_lock); + spin_lock_irqsave(&to_mdev(dev)->sm_lock, flags); memcpy(((struct ib_smp *) mad)->data, dev->node_desc, 64); - spin_unlock(&to_mdev(dev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(dev)->sm_lock, flags); } } @@ -213,6 +216,7 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn]; int ret; + unsigned long flags; if (agent) { send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR, @@ -225,13 +229,13 @@ static void forward_trap(struct mlx4_ib_dev *dev, u8 port_num, struct ib_mad *ma * wrong following the IB spec strictly, but we know * it's OK for our devices). */ - spin_lock(&dev->sm_lock); + spin_lock_irqsave(&dev->sm_lock, flags); memcpy(send_buf->mad, mad, sizeof *mad); if ((send_buf->ah = dev->sm_ah[port_num - 1])) ret = ib_post_send_mad(send_buf, NULL); else ret = -EINVAL; - spin_unlock(&dev->sm_lock); + spin_unlock_irqrestore(&dev->sm_lock, flags); if (ret) ib_free_send_mad(send_buf); diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index fe2088cfa6ee..cc05579ebce7 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -423,6 +423,7 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, struct ib_device_modify *props) { struct mlx4_cmd_mailbox *mailbox; + unsigned long flags; if (mask & ~IB_DEVICE_MODIFY_NODE_DESC) return -EOPNOTSUPP; @@ -430,9 +431,9 @@ static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask, if (!(mask & IB_DEVICE_MODIFY_NODE_DESC)) return 0; - spin_lock(&to_mdev(ibdev)->sm_lock); + spin_lock_irqsave(&to_mdev(ibdev)->sm_lock, flags); memcpy(ibdev->node_desc, props->node_desc, 64); - spin_unlock(&to_mdev(ibdev)->sm_lock); + spin_unlock_irqrestore(&to_mdev(ibdev)->sm_lock, flags); /* * If possible, pass node desc to FW, so it can generate From b53cc0fadef59583a9056c973e639852bed47e73 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 31 Jul 2012 18:29:08 +0400 Subject: [PATCH 0435/1098] serial: Change Kconfig entry for CLPS711X-target This trivial patch adds a short description for SERIAL_CLPS711X Kconfig entry, removes excess dependence on the ARM-platform (this is done globally for the platform), allows the driver to be compiled by default and removes unnecessary description about GRUB and LILO, because these bootloaders do not supported this platform. Signed-off-by: Alexander Shiyan Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 070b442c1f81..4720b4ba096a 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -160,10 +160,12 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X + depends on ARCH_CLPS711X select SERIAL_CORE + default y help - ::: To be written ::: + This enables the driver for the on-chip UARTs of the Cirrus + Logic EP711x/EP721x/EP731x processors. config SERIAL_CLPS711X_CONSOLE bool "Support for console on CLPS711X serial port" @@ -173,9 +175,7 @@ config SERIAL_CLPS711X_CONSOLE Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttyCL1". config SERIAL_SAMSUNG tristate "Samsung SoC serial support" From 7d9739cd6b03575bc88c6ce3c60853dbc50a6ae2 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 7 Aug 2012 13:12:47 +0800 Subject: [PATCH 0436/1098] serial: ifx6x60: fix paging fault on spi_register_driver [ 117.240866] BUG: unable to handle kernel paging request at 815b627c [ 117.240866] IP: [<813fe94b>] spi_register_driver+0xb/0x50 ... [ 117.240866] Call Trace: [ 117.240866] [<817de977>] ifx_spi_init+0xbe/0xf0 The root cause is, spi_register_driver() is trying to write into the passed *const* struct spi_driver. Signed-off-by: Fengguang Wu Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 144cd3987d4c..3ad079ffd049 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1331,7 +1331,7 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver = { +static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, From b5ec8eeac46a99004c26791f70b15d001e970acf Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 10 Aug 2012 02:22:47 +0000 Subject: [PATCH 0437/1098] ipv4: fix ip_send_skb() ip_send_skb() can send orphaned skb, so we must pass the net pointer to avoid possible NULL dereference in error path. Bug added by commit 3a7c384ffd57 (ipv4: tcp: unicast_sock should not land outside of TCP stack) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/ip.h | 2 +- net/ipv4/ip_output.c | 5 ++--- net/ipv4/udp.c | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index bd5e444a19ce..5a5d84d3d2c6 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -120,7 +120,7 @@ extern struct sk_buff *__ip_make_skb(struct sock *sk, struct flowi4 *fl4, struct sk_buff_head *queue, struct inet_cork *cork); -extern int ip_send_skb(struct sk_buff *skb); +extern int ip_send_skb(struct net *net, struct sk_buff *skb); extern int ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4); extern void ip_flush_pending_frames(struct sock *sk); extern struct sk_buff *ip_make_skb(struct sock *sk, diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index ec410e08b4b9..147ccc3e93db 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1366,9 +1366,8 @@ out: return skb; } -int ip_send_skb(struct sk_buff *skb) +int ip_send_skb(struct net *net, struct sk_buff *skb) { - struct net *net = sock_net(skb->sk); int err; err = ip_local_out(skb); @@ -1391,7 +1390,7 @@ int ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4) return 0; /* Netfilter gets whole the not fragmented skb. */ - return ip_send_skb(skb); + return ip_send_skb(sock_net(sk), skb); } /* diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index b4c3582a991f..6f6d1aca3c3d 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -758,7 +758,7 @@ static int udp_send_skb(struct sk_buff *skb, struct flowi4 *fl4) uh->check = CSUM_MANGLED_0; send: - err = ip_send_skb(skb); + err = ip_send_skb(sock_net(sk), skb); if (err) { if (err == -ENOBUFS && !inet->recverr) { UDP_INC_STATS_USER(sock_net(sk), From 484d90eec884d814b005c9736bcf3fd018acba65 Mon Sep 17 00:00:00 2001 From: Andrew Boie Date: Fri, 10 Aug 2012 11:49:06 -0700 Subject: [PATCH 0438/1098] x86, build: Globally set -fno-pic GCC built with nonstandard options can enable -fpic by default. We never want this for 32-bit kernels and it will break the build. [ hpa: Notably the Android toolchain apparently does this. ] Change-Id: Iaab7d66e598b1c65ac4a4f0229eca2cd3d0d2898 Signed-off-by: Andrew Boie Link: http://lkml.kernel.org/r/1344624546-29691-1-git-send-email-andrew.p.boie@intel.com Signed-off-by: H. Peter Anvin --- arch/x86/Makefile | 4 ++++ arch/x86/boot/Makefile | 2 +- arch/x86/realmode/rm/Makefile | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861ec..682e9c210baa 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd884db..f7535bedc33f 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534cab25f..88692871823f 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ From 55461ddbcb0b36d1575e01fb4f130c609ca1cfee Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 10 Aug 2012 07:35:14 +0000 Subject: [PATCH 0439/1098] ixgbe: add missing braces This patch adds missing braces around the 10gig link check to include the check for KR support. Signed-off-by: Emil Tantilov Reported-by: Sascha Wildner Tested-by: Phil Schmitt Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 50fc137501da..18bf08c9d7a4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -804,12 +804,13 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { /* Set KX4/KX/KR support according to speed requested */ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); - if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) autoc |= IXGBE_AUTOC_KX4_SUPP; if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && (hw->phy.smart_speed_active == false)) autoc |= IXGBE_AUTOC_KR_SUPP; + } if (speed & IXGBE_LINK_SPEED_1GB_FULL) autoc |= IXGBE_AUTOC_KX_SUPP; } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && From d549f55f2e132e3d1f1288ce4231f45f12988bbf Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 10 Aug 2012 16:52:13 -0700 Subject: [PATCH 0440/1098] RDMA/ocrdma: Don't call vlan_dev_real_dev() for non-VLAN netdevs If CONFIG_VLAN_8021Q is not set, then vlan_dev_real_dev() just goes BUG(), so we shouldn't call it unless we're actually dealing with a VLAN netdev. Reported-by: Fengguang Wu Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ocrdma/ocrdma_main.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c index 5a044526e4f4..c4e0131f1b57 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c @@ -161,7 +161,7 @@ static void ocrdma_add_default_sgid(struct ocrdma_dev *dev) ocrdma_get_guid(dev, &sgid->raw[8]); } -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#if IS_ENABLED(CONFIG_VLAN_8021Q) static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev) { struct net_device *netdev, *tmp; @@ -202,14 +202,13 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev) return 0; } -#if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_VLAN_8021Q) +#if IS_ENABLED(CONFIG_IPV6) static int ocrdma_inet6addr_event(struct notifier_block *notifier, unsigned long event, void *ptr) { struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; - struct net_device *event_netdev = ifa->idev->dev; - struct net_device *netdev = NULL; + struct net_device *netdev = ifa->idev->dev; struct ib_event gid_event; struct ocrdma_dev *dev; bool found = false; @@ -217,11 +216,12 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier, bool is_vlan = false; u16 vid = 0; - netdev = vlan_dev_real_dev(event_netdev); - if (netdev != event_netdev) { - is_vlan = true; - vid = vlan_dev_vlan_id(event_netdev); + is_vlan = netdev->priv_flags & IFF_802_1Q_VLAN; + if (is_vlan) { + vid = vlan_dev_vlan_id(netdev); + netdev = vlan_dev_real_dev(netdev); } + rcu_read_lock(); list_for_each_entry_rcu(dev, &ocrdma_dev_list, entry) { if (dev->nic_info.netdev == netdev) { From 2359a47671fc4fb0fe5e9945f76c2cb10792c0f8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 29 Jul 2012 20:52:21 +0000 Subject: [PATCH 0441/1098] codel: refine one condition to avoid a nul rec_inv_sqrt One condition before codel_Newton_step() was not good if we never left the dropping state for a flow. As a result rec_inv_sqrt was 0, instead of the ~0 initial value. codel control law was then set to a very aggressive mode, dropping many packets before reaching 'target' and recovering from this problem. To keep codel_vars_init() as efficient as possible, refine the condition to make sure rec_inv_sqrt initial value is correct Many thanks to Anton Mich for discovering the issue and suggesting a fix. Reported-by: Anton Mich Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/codel.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/include/net/codel.h b/include/net/codel.h index 550debfc2403..389cf621161d 100644 --- a/include/net/codel.h +++ b/include/net/codel.h @@ -305,6 +305,8 @@ static struct sk_buff *codel_dequeue(struct Qdisc *sch, } } } else if (drop) { + u32 delta; + if (params->ecn && INET_ECN_set_ce(skb)) { stats->ecn_mark++; } else { @@ -320,9 +322,11 @@ static struct sk_buff *codel_dequeue(struct Qdisc *sch, * assume that the drop rate that controlled the queue on the * last cycle is a good starting point to control it now. */ - if (codel_time_before(now - vars->drop_next, + delta = vars->count - vars->lastcount; + if (delta > 1 && + codel_time_before(now - vars->drop_next, 16 * params->interval)) { - vars->count = (vars->count - vars->lastcount) | 1; + vars->count = delta; /* we dont care if rec_inv_sqrt approximation * is not very precise : * Next Newton steps will correct it quadratically. From f7e416eb923d0f9ff1e5e9b5c0e8b75ddd7db865 Mon Sep 17 00:00:00 2001 From: Venkatraman Sathiyamoorthy Date: Fri, 3 Aug 2012 07:58:33 +0100 Subject: [PATCH 0442/1098] ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology Get rid of this warning.. arch/arm/kernel/built-in.o(.text+0xac78): Section mismatch in reference from the function init_cpu_topology() to the function .init.text:parse_dt_topology() The function init_cpu_topology() references the function __init parse_dt_topology(). This is often because init_cpu_topology lacks a __init annotation or the annotation of parse_dt_topology is wrong. Signed-off-by: Venkatraman S Signed-off-by: Russell King --- arch/arm/kernel/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e90..26c12c6440fc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; From 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 3 Aug 2012 17:24:14 +0100 Subject: [PATCH 0443/1098] ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Cc: # 3.1+ Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bde..c834b32af275 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; From f1898f6be9a2e3690fb62d8307849b86a89cc36c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 6 Aug 2012 18:43:42 +0100 Subject: [PATCH 0444/1098] ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks Now that ARM has implemented its spinlocks with tickets we don't need to use the generic lockbreak algorithm. Remove the Kconfig from ARM so that we use the arch_spin_is_contended() definition from the asm header. This also saves a word in each lock because we don't need the break_lock member anymore. Signed-off-by: Stephen Boyd Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..e4191ccbdb7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -126,11 +126,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y From 237ec6f2e51d2fc2ff37c7c5f1ccc9264d09c85b Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Tue, 7 Aug 2012 19:05:10 +0100 Subject: [PATCH 0445/1098] ARM: 7486/1: sched_clock: update epoch_cyc on resume Many clocks that are used to provide sched_clock will reset during suspend. If read_sched_clock returns 0 after suspend, sched_clock will appear to jump forward. This patch resets cd.epoch_cyc to the current value of read_sched_clock during resume, which causes sched_clock() just after suspend to return the same value as sched_clock() just before suspend. In addition, during the window where epoch_ns has been updated before suspend, but epoch_cyc has not been updated after suspend, it is unknown whether the clock has reset or not, and sched_clock() could return a bogus value. Add a suspended flag, and return the pre-suspend epoch_ns value during this period. The new behavior is triggered by calling setup_sched_clock_needs_suspend instead of setup_sched_clock. Signed-off-by: Colin Cross Reviewed-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/include/asm/sched_clock.h | 2 ++ arch/arm/kernel/sched_clock.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..05b8e82ec9f5 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06..f4515393248d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) From 47f1204329237a0f8655f5a9f14a38ac81946ca1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:18 +0100 Subject: [PATCH 0446/1098] ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 40 ++++++++++++++++++---------------- arch/arm/mm/flush.c | 2 -- 2 files changed, 21 insertions(+), 21 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d..d88f9f049e95 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,25 +195,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) -#if __LINUX_ARM_ARCH__ < 6 -static inline void __sync_icache_dcache(pte_t pteval) -{ -} -#else -extern void __sync_icache_dcache(pte_t pteval); -#endif - -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval) -{ - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { - __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); - } -} - #define pte_none(pte) (!pte_val(pte)) #define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) #define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) @@ -226,6 +207,27 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ (L_PTE_PRESENT | L_PTE_USER)) +#if __LINUX_ARM_ARCH__ < 6 +static inline void __sync_icache_dcache(pte_t pteval) +{ +} +#else +extern void __sync_icache_dcache(pte_t pteval); +#endif + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { + __sync_icache_dcache(pteval); + ext |= PTE_EXT_NG; + } + + set_pte_ext(ptep, pteval, ext); +} + #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031..40ca11ed6e5f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; From f5f2025ef3e2cdb593707cbf87378761f17befbe Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:19 +0100 Subject: [PATCH 0447/1098] ARM: 7488/1: mm: use 5 bits for swapfile type encoding Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index d88f9f049e95..41dc31f834c3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -253,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) From 730a8128cd8978467eb1cf546b11014acb57d433 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 19:13:36 +0100 Subject: [PATCH 0448/1098] ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/tlb-v7.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb56..ea94765acf9a 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT From 8a3f0ede2b3f5477122060af1a816c6bbf09fcd2 Mon Sep 17 00:00:00 2001 From: Jayakrishnan Memana Date: Sun, 15 Jul 2012 10:54:03 -0300 Subject: [PATCH 0449/1098] [media] uvcvideo: Reset the bytesused field when recycling an erroneous buffer Buffers marked as erroneous are recycled immediately by the driver if the nodrop module parameter isn't set. The buffer payload size is reset to 0, but the buffer bytesused field isn't. This results in the buffer being immediately considered as complete, leading to an infinite loop in interrupt context. Fix the problem by resetting the bytesused field when recycling the buffer. Cc: Signed-off-by: Jayakrishnan Memana Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_queue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 9288fbd5001b..5577381b5bf0 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -338,6 +338,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) { buf->error = 0; buf->state = UVC_BUF_STATE_QUEUED; + buf->bytesused = 0; vb2_set_plane_payload(&buf->buf, 0, 0); return buf; } From 467548aa9fe91c35fc908a844129a788aec6a2d0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 3 Aug 2012 11:16:29 -0300 Subject: [PATCH 0450/1098] [media] DocBook: Remove a spurious character Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-g-tuner.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 720395127904..701138f1209d 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -125,7 +125,7 @@ the structure refers to a radio tuner the V4L2_TUNER_CAP_NORM flags can't be used. If multiple frequency bands are supported, then capability is the union of all -capability> fields of each &v4l2-frequency-band;. +capability fields of each &v4l2-frequency-band;. From 3273781068268c404ea239dde4f6c246686dfa00 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 3 Aug 2012 11:16:59 -0300 Subject: [PATCH 0451/1098] [media] si470x: v4l2-compliance fixes Just a few fixes for problems found after updating v4l2-compliance to check the frequency band enumeration. Note that the i2c driver doesn't fill in bus_info, but since I can't test that driver I've decided not to fix that. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 3 +++ drivers/media/radio/si470x/radio-si470x-i2c.c | 5 +++-- drivers/media/radio/si470x/radio-si470x-usb.c | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index 9e38132afec6..9bb65e170d99 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -151,6 +151,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 0, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 87500 * 16, @@ -162,6 +163,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 1, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 76000 * 16, @@ -173,6 +175,7 @@ static const struct v4l2_frequency_band bands[] = { .index = 2, .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO | + V4L2_TUNER_CAP_FREQ_BANDS | V4L2_TUNER_CAP_HWSEEK_BOUNDED | V4L2_TUNER_CAP_HWSEEK_WRAP, .rangelow = 76000 * 16, diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index 643a6ff7c5d0..f867f04cccc9 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -225,8 +225,9 @@ int si470x_vidioc_querycap(struct file *file, void *priv, { strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver)); strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); - capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | - V4L2_CAP_TUNER | V4L2_CAP_RADIO; + capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | + V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; + capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index 146be4263ea1..be076f7181e7 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -531,7 +531,7 @@ int si470x_vidioc_querycap(struct file *file, void *priv, strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); usb_make_path(radio->usbdev, capability->bus_info, sizeof(capability->bus_info)); - capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | + capability->device_caps = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_READWRITE | V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; From 770c12312ad617172b1a65b911d3e6564fc5aca8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 11 Aug 2012 08:56:42 +0200 Subject: [PATCH 0452/1098] drm/i915: Fix blank panel at reopening lid When you reopen the lid on a laptop with PCH, the panel suddenly goes blank sometimes. It seems because BLC_PWM_CPU_CTL register is cleared to zero when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 registers are enabled. This patch fixes the problem by moving the call of the function setting BLC_PWM_CPU_CTL after enabling other two registers. Reported-and-tested-by: Hugh Dickins Signed-off-by: Takashi Iwai Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 9474488db948..3df4f5fa892a 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -311,9 +311,6 @@ void intel_panel_enable_backlight(struct drm_device *dev, if (dev_priv->backlight_level == 0) dev_priv->backlight_level = intel_panel_get_max_backlight(dev); - dev_priv->backlight_enabled = true; - intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); - if (INTEL_INFO(dev)->gen >= 4) { uint32_t reg, tmp; @@ -326,7 +323,7 @@ void intel_panel_enable_backlight(struct drm_device *dev, * we don't track the backlight dpms state, hence check whether * we have to do anything first. */ if (tmp & BLM_PWM_ENABLE) - return; + goto set_level; if (dev_priv->num_pipe == 3) tmp &= ~BLM_PIPE_SELECT_IVB; @@ -347,6 +344,14 @@ void intel_panel_enable_backlight(struct drm_device *dev, I915_WRITE(BLC_PWM_PCH_CTL1, tmp); } } + +set_level: + /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1. + * BLC_PWM_CPU_CTL may be cleared to zero automatically when these + * registers are set. + */ + dev_priv->backlight_enabled = true; + intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); } static void intel_panel_init_backlight(struct drm_device *dev) From 4344b813f105a19f793f1fd93ad775b784648b95 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 10 Aug 2012 11:10:20 +0200 Subject: [PATCH 0453/1098] drm/i915: ignore eDP bpc settings from vbt This has originally been introduced to not oversubscribe the dp links in commit 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18 Author: Zhenyu Wang Date: Tue Jan 12 05:38:31 2010 +0800 drm/i915: fix pixel color depth setting on eDP Since then we've fixed up the dp link bandwidth calculation code and should now automatically fall back to 6bpc dithering. So this is unnecessary. Furthermore it seems to break the new MacbookPro with retina display, hence let's just rip this out. Reported-by: Benoit Gschwind Cc: Benoit Gschwind Cc: Francois Rigaut Cc: Greg KH Cc: stable@vger.kernel.org Tested-by: Benoit Gschwind Tested-by: Bernhard Froemel Signed-off-by: Daniel Vetter -- Testing feedback highgly welcome, and thanks for Benoit for finding out that the bpc computations are busted. -Daniel --- drivers/gpu/drm/i915/intel_display.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 88913a47cd34..a69a3d0d3acf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3754,17 +3754,6 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, continue; } - if (intel_encoder->type == INTEL_OUTPUT_EDP) { - /* Use VBT settings if we have an eDP panel */ - unsigned int edp_bpc = dev_priv->edp.bpp / 3; - - if (edp_bpc < display_bpc) { - DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); - display_bpc = edp_bpc; - } - continue; - } - /* Not one of the known troublemakers, check the EDID */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { From 00424c7ec5d39044df1ce79d48ff3022838aad44 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 03:32:33 -0300 Subject: [PATCH 0454/1098] [media] mem2mem_testdev: fix querycap regression Trival but important patch. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mem2mem_testdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index 7efe9ad7acc7..0b91a5cd38eb 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -431,7 +431,7 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); strlcpy(cap->bus_info, MEM2MEM_NAME, sizeof(cap->bus_info)); - cap->capabilities = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; + cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING; cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } From aa4d9b53f0d71ff805bbd1e30fcba9d1827a7dd8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 15:52:46 -0300 Subject: [PATCH 0455/1098] [media] VIDIOC_ENUM_FREQ_BANDS fix When VIDIOC_ENUM_FREQ_BANDS is called for a driver that doesn't supply an enum_freq_bands op, then it will fall back to reporting a single freq band based on information from g_tuner or g_modulator. Due to a bug this is an infinite list since the index field wasn't tested. This patch fixes this and returns -EINVAL if index != 0. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index c3b7b5f59b32..54f4ac612e8e 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1853,6 +1853,8 @@ static int v4l_enum_freq_bands(const struct v4l2_ioctl_ops *ops, .type = type, }; + if (p->index) + return -EINVAL; err = ops->vidioc_g_tuner(file, fh, &t); if (err) return err; @@ -1870,6 +1872,8 @@ static int v4l_enum_freq_bands(const struct v4l2_ioctl_ops *ops, if (type != V4L2_TUNER_RADIO) return -EINVAL; + if (p->index) + return -EINVAL; err = ops->vidioc_g_modulator(file, fh, &m); if (err) return err; From 5e78831756bc455f334782514f2e1b0f605a81d6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 1 Aug 2012 16:18:41 -0300 Subject: [PATCH 0456/1098] [media] Add missing logging for rangelow/high of hwseek struct v4l2_hw_freq_seek has two new fields that weren't printed in the logging function. Added. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 54f4ac612e8e..6bc47fc82fe2 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -402,8 +402,10 @@ static void v4l_print_hw_freq_seek(const void *arg, bool write_only) { const struct v4l2_hw_freq_seek *p = arg; - pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n", - p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing); + pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, " + "rangelow=%u, rangehigh=%u\n", + p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing, + p->rangelow, p->rangehigh); } static void v4l_print_requestbuffers(const void *arg, bool write_only) From ac6eb458f5f9d45dd3bbfe8a91683c09860910c5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 6 Aug 2012 00:15:20 -0300 Subject: [PATCH 0457/1098] [media] Add USB dependency for IguanaWorks USB IR Transceiver This patch fixes the error drivers/usb/core/hub.c:3753: undefined reference to `usb_speed_string' seen in various random configurations. Cc: Sean Young Cc: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 5180390be7ab..8be57634ba60 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -261,6 +261,7 @@ config IR_WINBOND_CIR config IR_IGUANA tristate "IguanaWorks USB IR Transceiver" + depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB ---help--- From 820ddfa6ca87fc12bf202907b77f635df2098e66 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:52 -0300 Subject: [PATCH 0458/1098] [media] radio-shark*: Remove work-around for dangling pointer in usb intfdata Recent kernels properly clear the usb intfdata pointer when another driver fails to bind (in the radio-shark* case the usbhid driver would try to bind first. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 9 --------- drivers/media/radio/radio-shark2.c | 9 --------- 2 files changed, 18 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index d0b6bb507634..e35b8d938a30 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -286,15 +286,6 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - /* - * Work around a bug in usbhid/hid-core.c, where it leaves a dangling - * pointer in intfdata causing v4l2-device.c to not set it. Which - * results in usb_shark_disconnect() referencing the dangling pointer - * - * REMOVE (as soon as the above bug is fixed, patch submitted) - */ - usb_set_intfdata(intf, NULL); - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index b9575de3e7e8..fc0289d5da4e 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -258,15 +258,6 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - /* - * Work around a bug in usbhid/hid-core.c, where it leaves a dangling - * pointer in intfdata causing v4l2-device.c to not set it. Which - * results in usb_shark_disconnect() referencing the dangling pointer - * - * REMOVE (as soon as the above bug is fixed, patch submitted) - */ - usb_set_intfdata(intf, NULL); - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); From cfc1b2a06f87f562da2ffb9f8d1ae4203d9bfbfa Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:53 -0300 Subject: [PATCH 0459/1098] [media] radio-shark*: Call cancel_work_sync from disconnect rather then release This removes the need for shark_led_work to take the v4l2 lock. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 13 ++----------- drivers/media/radio/radio-shark2.c | 12 ++---------- 2 files changed, 4 insertions(+), 21 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index e35b8d938a30..1d76afa9e1b7 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -181,14 +181,6 @@ static void shark_led_work(struct work_struct *work) container_of(work, struct shark_device, led_work); int i, res, brightness, actual_len; - /* - * We use the v4l2_dev lock and registered bit to ensure the device - * does not get unplugged and unreffed while we're running. - */ - mutex_lock(&shark->tea.mutex); - if (!video_is_registered(&shark->tea.vd)) - goto leave; - for (i = 0; i < 3; i++) { if (!test_and_clear_bit(i, &shark->brightness_new)) continue; @@ -208,8 +200,6 @@ static void shark_led_work(struct work_struct *work) v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n", shark->led_names[i], res); } -leave: - mutex_unlock(&shark->tea.mutex); } static void shark_led_set_blue(struct led_classdev *led_cdev, @@ -259,6 +249,8 @@ static void usb_shark_disconnect(struct usb_interface *intf) for (i = 0; i < NO_LEDS; i++) led_classdev_unregister(&shark->leds[i]); + cancel_work_sync(&shark->led_work); + v4l2_device_put(&shark->v4l2_dev); } @@ -266,7 +258,6 @@ static void usb_shark_release(struct v4l2_device *v4l2_dev) { struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - cancel_work_sync(&shark->led_work); v4l2_device_unregister(&shark->v4l2_dev); kfree(shark->transfer_buffer); kfree(shark); diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index fc0289d5da4e..217483ca1b18 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -166,13 +166,6 @@ static void shark_led_work(struct work_struct *work) struct shark_device *shark = container_of(work, struct shark_device, led_work); int i, res, brightness, actual_len; - /* - * We use the v4l2_dev lock and registered bit to ensure the device - * does not get unplugged and unreffed while we're running. - */ - mutex_lock(&shark->tea.mutex); - if (!video_is_registered(&shark->tea.vd)) - goto leave; for (i = 0; i < 2; i++) { if (!test_and_clear_bit(i, &shark->brightness_new)) @@ -191,8 +184,6 @@ static void shark_led_work(struct work_struct *work) v4l2_err(&shark->v4l2_dev, "set LED %s error: %d\n", shark->led_names[i], res); } -leave: - mutex_unlock(&shark->tea.mutex); } static void shark_led_set_blue(struct led_classdev *led_cdev, @@ -231,6 +222,8 @@ static void usb_shark_disconnect(struct usb_interface *intf) for (i = 0; i < NO_LEDS; i++) led_classdev_unregister(&shark->leds[i]); + cancel_work_sync(&shark->led_work); + v4l2_device_put(&shark->v4l2_dev); } @@ -238,7 +231,6 @@ static void usb_shark_release(struct v4l2_device *v4l2_dev) { struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - cancel_work_sync(&shark->led_work); v4l2_device_unregister(&shark->v4l2_dev); kfree(shark->transfer_buffer); kfree(shark); From 3e3b92cac5371031e9d2f916189577025f508ab8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:54 -0300 Subject: [PATCH 0460/1098] [media] radio-shark: Only compile led support when CONFIG_LED_CLASS is set Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark.c | 135 +++++++++++++++++------------- 1 file changed, 79 insertions(+), 56 deletions(-) diff --git a/drivers/media/radio/radio-shark.c b/drivers/media/radio/radio-shark.c index 1d76afa9e1b7..72ded29728bb 100644 --- a/drivers/media/radio/radio-shark.c +++ b/drivers/media/radio/radio-shark.c @@ -35,6 +35,11 @@ #include #include +#if defined(CONFIG_LEDS_CLASS) || \ + (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK_MODULE)) +#define SHARK_USE_LEDS 1 +#endif + /* * Version Information */ @@ -56,44 +61,18 @@ MODULE_LICENSE("GPL"); enum { BLUE_LED, BLUE_PULSE_LED, RED_LED, NO_LEDS }; -static void shark_led_set_blue(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_blue_pulse(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_red(struct led_classdev *led_cdev, - enum led_brightness value); - -static const struct led_classdev shark_led_templates[NO_LEDS] = { - [BLUE_LED] = { - .name = "%s:blue:", - .brightness = LED_OFF, - .max_brightness = 127, - .brightness_set = shark_led_set_blue, - }, - [BLUE_PULSE_LED] = { - .name = "%s:blue-pulse:", - .brightness = LED_OFF, - .max_brightness = 255, - .brightness_set = shark_led_set_blue_pulse, - }, - [RED_LED] = { - .name = "%s:red:", - .brightness = LED_OFF, - .max_brightness = 1, - .brightness_set = shark_led_set_red, - }, -}; - struct shark_device { struct usb_device *usbdev; struct v4l2_device v4l2_dev; struct snd_tea575x tea; +#ifdef SHARK_USE_LEDS struct work_struct led_work; struct led_classdev leds[NO_LEDS]; char led_names[NO_LEDS][32]; atomic_t brightness[NO_LEDS]; unsigned long brightness_new; +#endif u8 *transfer_buffer; u32 last_val; @@ -175,6 +154,7 @@ static struct snd_tea575x_ops shark_tea_ops = { .read_val = shark_read_val, }; +#ifdef SHARK_USE_LEDS static void shark_led_work(struct work_struct *work) { struct shark_device *shark = @@ -235,21 +215,78 @@ static void shark_led_set_red(struct led_classdev *led_cdev, schedule_work(&shark->led_work); } +static const struct led_classdev shark_led_templates[NO_LEDS] = { + [BLUE_LED] = { + .name = "%s:blue:", + .brightness = LED_OFF, + .max_brightness = 127, + .brightness_set = shark_led_set_blue, + }, + [BLUE_PULSE_LED] = { + .name = "%s:blue-pulse:", + .brightness = LED_OFF, + .max_brightness = 255, + .brightness_set = shark_led_set_blue_pulse, + }, + [RED_LED] = { + .name = "%s:red:", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_set = shark_led_set_red, + }, +}; + +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + int i, retval; + + INIT_WORK(&shark->led_work, shark_led_work); + for (i = 0; i < NO_LEDS; i++) { + shark->leds[i] = shark_led_templates[i]; + snprintf(shark->led_names[i], sizeof(shark->led_names[0]), + shark->leds[i].name, shark->v4l2_dev.name); + shark->leds[i].name = shark->led_names[i]; + retval = led_classdev_register(dev, &shark->leds[i]); + if (retval) { + v4l2_err(&shark->v4l2_dev, + "couldn't register led: %s\n", + shark->led_names[i]); + return retval; + } + } + return 0; +} + +static void shark_unregister_leds(struct shark_device *shark) +{ + int i; + + for (i = 0; i < NO_LEDS; i++) + led_classdev_unregister(&shark->leds[i]); + + cancel_work_sync(&shark->led_work); +} +#else +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + v4l2_warn(&shark->v4l2_dev, + "CONFIG_LED_CLASS not enabled, LED support disabled\n"); + return 0; +} +static inline void shark_unregister_leds(struct shark_device *shark) { } +#endif + static void usb_shark_disconnect(struct usb_interface *intf) { struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - int i; mutex_lock(&shark->tea.mutex); v4l2_device_disconnect(&shark->v4l2_dev); snd_tea575x_exit(&shark->tea); mutex_unlock(&shark->tea.mutex); - for (i = 0; i < NO_LEDS; i++) - led_classdev_unregister(&shark->leds[i]); - - cancel_work_sync(&shark->led_work); + shark_unregister_leds(shark); v4l2_device_put(&shark->v4l2_dev); } @@ -267,7 +304,7 @@ static int usb_shark_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct shark_device *shark; - int i, retval = -ENOMEM; + int retval = -ENOMEM; shark = kzalloc(sizeof(struct shark_device), GFP_KERNEL); if (!shark) @@ -277,8 +314,13 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); + + retval = shark_register_leds(shark, &intf->dev); + if (retval) + goto err_reg_leds; + + shark->v4l2_dev.release = usb_shark_release; retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); if (retval) { v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n"); @@ -302,32 +344,13 @@ static int usb_shark_probe(struct usb_interface *intf, goto err_init_tea; } - INIT_WORK(&shark->led_work, shark_led_work); - for (i = 0; i < NO_LEDS; i++) { - shark->leds[i] = shark_led_templates[i]; - snprintf(shark->led_names[i], sizeof(shark->led_names[0]), - shark->leds[i].name, shark->v4l2_dev.name); - shark->leds[i].name = shark->led_names[i]; - /* - * We don't fail the probe if we fail to register the leds, - * because once we've called snd_tea575x_init, the /dev/radio0 - * node may be opened from userspace holding a reference to us! - * - * Note we cannot register the leds first instead as - * shark_led_work depends on the v4l2 mutex and registered bit. - */ - retval = led_classdev_register(&intf->dev, &shark->leds[i]); - if (retval) - v4l2_err(&shark->v4l2_dev, - "couldn't register led: %s\n", - shark->led_names[i]); - } - return 0; err_init_tea: v4l2_device_unregister(&shark->v4l2_dev); err_reg_dev: + shark_unregister_leds(shark); +err_reg_leds: kfree(shark->transfer_buffer); err_alloc_buffer: kfree(shark); From be0c44fb480fe43fe8794ec4bff0b0e7e0b50c72 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 11 Aug 2012 06:34:55 -0300 Subject: [PATCH 0461/1098] [media] radio-shark2: Only compile led support when CONFIG_LED_CLASS is set Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-shark2.c | 122 +++++++++++++++++------------ 1 file changed, 73 insertions(+), 49 deletions(-) diff --git a/drivers/media/radio/radio-shark2.c b/drivers/media/radio/radio-shark2.c index 217483ca1b18..7b4efdfaae28 100644 --- a/drivers/media/radio/radio-shark2.c +++ b/drivers/media/radio/radio-shark2.c @@ -35,6 +35,11 @@ #include #include "radio-tea5777.h" +#if defined(CONFIG_LEDS_CLASS) || \ + (defined(CONFIG_LEDS_CLASS_MODULE) && defined(CONFIG_RADIO_SHARK2_MODULE)) +#define SHARK_USE_LEDS 1 +#endif + MODULE_AUTHOR("Hans de Goede "); MODULE_DESCRIPTION("Griffin radioSHARK2, USB radio receiver driver"); MODULE_LICENSE("GPL"); @@ -43,7 +48,6 @@ static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); - #define SHARK_IN_EP 0x83 #define SHARK_OUT_EP 0x05 @@ -54,36 +58,18 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); enum { BLUE_LED, RED_LED, NO_LEDS }; -static void shark_led_set_blue(struct led_classdev *led_cdev, - enum led_brightness value); -static void shark_led_set_red(struct led_classdev *led_cdev, - enum led_brightness value); - -static const struct led_classdev shark_led_templates[NO_LEDS] = { - [BLUE_LED] = { - .name = "%s:blue:", - .brightness = LED_OFF, - .max_brightness = 127, - .brightness_set = shark_led_set_blue, - }, - [RED_LED] = { - .name = "%s:red:", - .brightness = LED_OFF, - .max_brightness = 1, - .brightness_set = shark_led_set_red, - }, -}; - struct shark_device { struct usb_device *usbdev; struct v4l2_device v4l2_dev; struct radio_tea5777 tea; +#ifdef SHARK_USE_LEDS struct work_struct led_work; struct led_classdev leds[NO_LEDS]; char led_names[NO_LEDS][32]; atomic_t brightness[NO_LEDS]; unsigned long brightness_new; +#endif u8 *transfer_buffer; }; @@ -161,6 +147,7 @@ static struct radio_tea5777_ops shark_tea_ops = { .read_reg = shark_read_reg, }; +#ifdef SHARK_USE_LEDS static void shark_led_work(struct work_struct *work) { struct shark_device *shark = @@ -208,21 +195,72 @@ static void shark_led_set_red(struct led_classdev *led_cdev, schedule_work(&shark->led_work); } +static const struct led_classdev shark_led_templates[NO_LEDS] = { + [BLUE_LED] = { + .name = "%s:blue:", + .brightness = LED_OFF, + .max_brightness = 127, + .brightness_set = shark_led_set_blue, + }, + [RED_LED] = { + .name = "%s:red:", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_set = shark_led_set_red, + }, +}; + +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + int i, retval; + + INIT_WORK(&shark->led_work, shark_led_work); + for (i = 0; i < NO_LEDS; i++) { + shark->leds[i] = shark_led_templates[i]; + snprintf(shark->led_names[i], sizeof(shark->led_names[0]), + shark->leds[i].name, shark->v4l2_dev.name); + shark->leds[i].name = shark->led_names[i]; + retval = led_classdev_register(dev, &shark->leds[i]); + if (retval) { + v4l2_err(&shark->v4l2_dev, + "couldn't register led: %s\n", + shark->led_names[i]); + return retval; + } + } + return 0; +} + +static void shark_unregister_leds(struct shark_device *shark) +{ + int i; + + for (i = 0; i < NO_LEDS; i++) + led_classdev_unregister(&shark->leds[i]); + + cancel_work_sync(&shark->led_work); +} +#else +static int shark_register_leds(struct shark_device *shark, struct device *dev) +{ + v4l2_warn(&shark->v4l2_dev, + "CONFIG_LED_CLASS not enabled, LED support disabled\n"); + return 0; +} +static inline void shark_unregister_leds(struct shark_device *shark) { } +#endif + static void usb_shark_disconnect(struct usb_interface *intf) { struct v4l2_device *v4l2_dev = usb_get_intfdata(intf); struct shark_device *shark = v4l2_dev_to_shark(v4l2_dev); - int i; mutex_lock(&shark->tea.mutex); v4l2_device_disconnect(&shark->v4l2_dev); radio_tea5777_exit(&shark->tea); mutex_unlock(&shark->tea.mutex); - for (i = 0; i < NO_LEDS; i++) - led_classdev_unregister(&shark->leds[i]); - - cancel_work_sync(&shark->led_work); + shark_unregister_leds(shark); v4l2_device_put(&shark->v4l2_dev); } @@ -240,7 +278,7 @@ static int usb_shark_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct shark_device *shark; - int i, retval = -ENOMEM; + int retval = -ENOMEM; shark = kzalloc(sizeof(struct shark_device), GFP_KERNEL); if (!shark) @@ -250,8 +288,13 @@ static int usb_shark_probe(struct usb_interface *intf, if (!shark->transfer_buffer) goto err_alloc_buffer; - shark->v4l2_dev.release = usb_shark_release; v4l2_device_set_name(&shark->v4l2_dev, DRV_NAME, &shark_instance); + + retval = shark_register_leds(shark, &intf->dev); + if (retval) + goto err_reg_leds; + + shark->v4l2_dev.release = usb_shark_release; retval = v4l2_device_register(&intf->dev, &shark->v4l2_dev); if (retval) { v4l2_err(&shark->v4l2_dev, "couldn't register v4l2_device\n"); @@ -275,32 +318,13 @@ static int usb_shark_probe(struct usb_interface *intf, goto err_init_tea; } - INIT_WORK(&shark->led_work, shark_led_work); - for (i = 0; i < NO_LEDS; i++) { - shark->leds[i] = shark_led_templates[i]; - snprintf(shark->led_names[i], sizeof(shark->led_names[0]), - shark->leds[i].name, shark->v4l2_dev.name); - shark->leds[i].name = shark->led_names[i]; - /* - * We don't fail the probe if we fail to register the leds, - * because once we've called radio_tea5777_init, the /dev/radio0 - * node may be opened from userspace holding a reference to us! - * - * Note we cannot register the leds first instead as - * shark_led_work depends on the v4l2 mutex and registered bit. - */ - retval = led_classdev_register(&intf->dev, &shark->leds[i]); - if (retval) - v4l2_err(&shark->v4l2_dev, - "couldn't register led: %s\n", - shark->led_names[i]); - } - return 0; err_init_tea: v4l2_device_unregister(&shark->v4l2_dev); err_reg_dev: + shark_unregister_leds(shark); +err_reg_leds: kfree(shark->transfer_buffer); err_alloc_buffer: kfree(shark); From e3756477aec028427fec767957c0d4b6cfb87208 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 10 Aug 2012 15:07:09 -0400 Subject: [PATCH 0462/1098] printk: Fix calculation of length used to discard records While tracking down a weird buffer overflow issue in a program that looked to be sane, I started double checking the length returned by syslog(SYSLOG_ACTION_READ_ALL, ...) to make sure it wasn't overflowing the buffer. Sure enough, it was. I saw this in strace: 11339 syslog(SYSLOG_ACTION_READ_ALL, "<5>[244017.708129] REISERFS (dev"..., 8192) = 8279 It turns out that the loops that calculate how much space the entries will take when they're copied don't include the newlines and prefixes that will be included in the final output since prev flags is passed as zero. This patch properly accounts for it and fixes the overflow. CC: stable@kernel.org Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- kernel/printk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/printk.c b/kernel/printk.c index 6a76ab9d4476..66a2ea37b576 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1034,6 +1034,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear) struct log *msg = log_from_idx(idx); len += msg_print_text(msg, prev, true, NULL, 0); + prev = msg->flags; idx = log_next(idx); seq++; } @@ -1046,6 +1047,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear) struct log *msg = log_from_idx(idx); len -= msg_print_text(msg, prev, true, NULL, 0); + prev = msg->flags; idx = log_next(idx); seq++; } From 3a7f8c34fefb109903af9a0fac6d0d05f93335c5 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Sat, 11 Aug 2012 20:26:31 +0000 Subject: [PATCH 0463/1098] macvtap: rcu_dereference outside read-lock section rcu_dereference occurs in update section. Replacement by rcu_dereference_protected in order to prevent lockdep complaint. Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Denis Efremov Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 0737bd4d1669..0f0f9ce3a776 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -94,7 +94,8 @@ static int get_slot(struct macvlan_dev *vlan, struct macvtap_queue *q) int i; for (i = 0; i < MAX_MACVTAP_QUEUES; i++) { - if (rcu_dereference(vlan->taps[i]) == q) + if (rcu_dereference_protected(vlan->taps[i], + lockdep_is_held(&macvtap_lock)) == q) return i; } From 7f5c3e3a80e6654cf48dfba7cf94f88c6b505467 Mon Sep 17 00:00:00 2001 From: "danborkmann@iogearbox.net" Date: Fri, 10 Aug 2012 22:48:54 +0000 Subject: [PATCH 0464/1098] af_packet: remove BUG statement in tpacket_destruct_skb Here's a quote of the comment about the BUG macro from asm-generic/bug.h: Don't use BUG() or BUG_ON() unless there's really no way out; one example might be detecting data structure corruption in the middle of an operation that can't be backed out of. If the (sub)system can somehow continue operating, perhaps with reduced functionality, it's probably not BUG-worthy. If you're tempted to BUG(), think again: is completely giving up really the *only* solution? There are usually better options, where users don't need to reboot ASAP and can mostly shut down cleanly. In our case, the status flag of a ring buffer slot is managed from both sides, the kernel space and the user space. This means that even though the kernel side might work as expected, the user space screws up and changes this flag right between the send(2) is triggered when the flag is changed to TP_STATUS_SENDING and a given skb is destructed after some time. Then, this will hit the BUG macro. As David suggested, the best solution is to simply remove this statement since it cannot be used for kernel side internal consistency checks. I've tested it and the system still behaves /stable/ in this case, so in accordance with the above comment, we should rather remove it. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/packet/af_packet.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index f016f6634a79..8ac890a1a4c0 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1936,7 +1936,6 @@ static void tpacket_destruct_skb(struct sk_buff *skb) if (likely(po->tx_ring.pg_vec)) { ph = skb_shinfo(skb)->destructor_arg; - BUG_ON(__packet_get_status(po, ph) != TP_STATUS_SENDING); BUG_ON(atomic_read(&po->tx_ring.pending) == 0); atomic_dec(&po->tx_ring.pending); __packet_set_status(po, ph, TP_STATUS_AVAILABLE); From f57b07c0c7ca9e4dde36acfabdf474ee3c478e6d Mon Sep 17 00:00:00 2001 From: Joren Van Onder Date: Sat, 11 Aug 2012 17:10:35 +0000 Subject: [PATCH 0465/1098] bnx2x: Fix compiler warnings Fix the following compiler warnings: - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Joren Van Onder Acked-By: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 77bcd4cb4ffb..463b9ec57d80 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1278,7 +1278,7 @@ struct bnx2x { #define BNX2X_FW_RX_ALIGN_START (1UL << BNX2X_RX_ALIGN_SHIFT) #define BNX2X_FW_RX_ALIGN_END \ - max(1UL << BNX2X_RX_ALIGN_SHIFT, \ + max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT, \ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) #define BNX2X_PXP_DRAM_ALIGN (BNX2X_RX_ALIGN_SHIFT - 5) From ffc493062ce9987156945aa21a677d83a179fc0a Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 20 Jul 2012 13:31:08 +0530 Subject: [PATCH 0466/1098] dma: tegra: enable/disable dma clock Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan Signed-off-by: Vinod Koul --- drivers/dma/tegra20-apb-dma.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index d52dbc6c54ab..24acd711e032 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -1119,15 +1119,21 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( static int tegra_dma_alloc_chan_resources(struct dma_chan *dc) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); + struct tegra_dma *tdma = tdc->tdma; + int ret; dma_cookie_init(&tdc->dma_chan); tdc->config_init = false; - return 0; + ret = clk_prepare_enable(tdma->dma_clk); + if (ret < 0) + dev_err(tdc2dev(tdc), "clk_prepare_enable failed: %d\n", ret); + return ret; } static void tegra_dma_free_chan_resources(struct dma_chan *dc) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); + struct tegra_dma *tdma = tdc->tdma; struct tegra_dma_desc *dma_desc; struct tegra_dma_sg_req *sg_req; @@ -1163,6 +1169,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc) list_del(&sg_req->node); kfree(sg_req); } + clk_disable_unprepare(tdma->dma_clk); } /* Tegra20 specific DMA controller information */ @@ -1255,6 +1262,13 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev) } } + /* Enable clock before accessing registers */ + ret = clk_prepare_enable(tdma->dma_clk); + if (ret < 0) { + dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret); + goto err_pm_disable; + } + /* Reset DMA controller */ tegra_periph_reset_assert(tdma->dma_clk); udelay(2); @@ -1265,6 +1279,8 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev) tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0); tdma_write(tdma, TEGRA_APBDMA_IRQ_MASK_SET, 0xFFFFFFFFul); + clk_disable_unprepare(tdma->dma_clk); + INIT_LIST_HEAD(&tdma->dma_dev.channels); for (i = 0; i < cdata->nr_channels; i++) { struct tegra_dma_channel *tdc = &tdma->channels[i]; From 86e99d23d0210e8d43a0bb576582a455d907578e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Mon, 13 Aug 2012 14:27:24 +0800 Subject: [PATCH 0467/1098] Revert "leds: use led_set_brightness in led_trigger_event" This reverts commit a0193cbee0809d65362a0767b2d50306b145b2f5. The problem with the original commit was that it caused a warning with the MMC trigger calling del_timer_sync from hard-irq context. Signed-off-by: Fabio Baltieri Reported-by: Pawel Moll Signed-off-by: Bryan Wu --- drivers/leds/led-triggers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index 6157cbbf4113..363975b3c925 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -224,7 +224,7 @@ void led_trigger_event(struct led_trigger *trig, struct led_classdev *led_cdev; led_cdev = list_entry(entry, struct led_classdev, trig_list); - led_set_brightness(led_cdev, brightness); + __led_set_brightness(led_cdev, brightness); } read_unlock(&trig->leddev_list_lock); } From 4a5a4184628c529774c1492bc1a21743b69b5fc3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 9 Aug 2012 05:27:58 +0800 Subject: [PATCH 0468/1098] leds: renesas: fix error handling bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path" introduced a possible case in which r_tpu_probe calls iounmap on a wild pointer. This changes the one case that was missed in the same way as the other error paths. Without this patch, building kota2_defconfig results in: drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe': drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann Cc: Magnus Damm Signed-off-by: Bryan Wu --- drivers/leds/leds-renesas-tpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c index 9ee12c28059a..771ea067e680 100644 --- a/drivers/leds/leds-renesas-tpu.c +++ b/drivers/leds/leds-renesas-tpu.c @@ -247,7 +247,7 @@ static int __devinit r_tpu_probe(struct platform_device *pdev) if (!cfg) { dev_err(&pdev->dev, "missing platform data\n"); - goto err0; + return -ENODEV; } p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); From 088c820b732dbfd515fc66d459d5f5777f79b406 Mon Sep 17 00:00:00 2001 From: Wang Xingchao Date: Mon, 13 Aug 2012 14:11:10 +0800 Subject: [PATCH 0469/1098] ALSA: hda - fix Copyright debug message As spec said, 1 indicates no copyright is asserted. Signed-off-by: Wang Xingchao Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 7e46258fc700..6894ec66258c 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -412,7 +412,7 @@ static void print_digital_conv(struct snd_info_buffer *buffer, if (digi1 & AC_DIG1_EMPHASIS) snd_iprintf(buffer, " Preemphasis"); if (digi1 & AC_DIG1_COPYRIGHT) - snd_iprintf(buffer, " Copyright"); + snd_iprintf(buffer, " Non-Copyright"); if (digi1 & AC_DIG1_NONAUDIO) snd_iprintf(buffer, " Non-Audio"); if (digi1 & AC_DIG1_PROFESSIONAL) From 080fc66fb5b6feae19fbbe8c6cbd7b11a4dac636 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Aug 2012 11:44:13 +0100 Subject: [PATCH 0470/1098] ARM: Bring back ARMv3 IO and user access code This partially reverts 357c9c1f07d4546bc3fbc0fd1044d96b114d14ed (ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs). Although we only support StrongARM on the RiscPC, we need to keep the ARMv3 user access code for this platform because the bus does not understand half-word load/stores. Reported-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/lib/Makefile | 23 +- arch/arm/lib/io-readsw-armv3.S | 106 ++++++ arch/arm/lib/io-writesw-armv3.S | 126 +++++++ arch/arm/lib/uaccess.S | 564 ++++++++++++++++++++++++++++++++ 4 files changed, 816 insertions(+), 3 deletions(-) create mode 100644 arch/arm/lib/io-readsw-armv3.S create mode 100644 arch/arm/lib/io-writesw-armv3.S create mode 100644 arch/arm/lib/uaccess.S diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51c..af72969820b4 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 000000000000..88487c8c4f23 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 000000000000..49b800419e32 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 000000000000..5c908b1cb8ed --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include +#include +#include +#include + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + From 14ebd8a8c15e9fed638120bdb93f1a814e13d6a9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 15:40:12 +0100 Subject: [PATCH 0471/1098] ASoC: wm5102: Add missing input PGA routes Signed-off-by: Mark Brown --- sound/soc/codecs/wm5102.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 6537f16d383e..496ce9a9d8be 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -639,6 +639,15 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = { { "AIF2 Capture", NULL, "SYSCLK" }, { "AIF3 Capture", NULL, "SYSCLK" }, + { "IN1L PGA", NULL, "IN1L" }, + { "IN1R PGA", NULL, "IN1R" }, + + { "IN2L PGA", NULL, "IN2L" }, + { "IN2R PGA", NULL, "IN2R" }, + + { "IN3L PGA", NULL, "IN3L" }, + { "IN3R PGA", NULL, "IN3R" }, + ARIZONA_MIXER_ROUTES("OUT1L", "HPOUT1L"), ARIZONA_MIXER_ROUTES("OUT1R", "HPOUT1R"), ARIZONA_MIXER_ROUTES("OUT2L", "HPOUT2L"), From 17c3f7e8f3ef796a9db3b22f3797188d0e7ac88c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 10 Aug 2012 15:40:22 +0100 Subject: [PATCH 0472/1098] ASoC: wm5110: Add missing input PGA routes Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 8033f7065189..01ebbcc5c6a4 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -681,6 +681,18 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = { { "AIF2 Capture", NULL, "SYSCLK" }, { "AIF3 Capture", NULL, "SYSCLK" }, + { "IN1L PGA", NULL, "IN1L" }, + { "IN1R PGA", NULL, "IN1R" }, + + { "IN2L PGA", NULL, "IN2L" }, + { "IN2R PGA", NULL, "IN2R" }, + + { "IN3L PGA", NULL, "IN3L" }, + { "IN3R PGA", NULL, "IN3R" }, + + { "IN4L PGA", NULL, "IN4L" }, + { "IN4R PGA", NULL, "IN4R" }, + ARIZONA_MIXER_ROUTES("OUT1L", "HPOUT1L"), ARIZONA_MIXER_ROUTES("OUT1R", "HPOUT1R"), ARIZONA_MIXER_ROUTES("OUT2L", "HPOUT2L"), From 1f68237865b2f55badbb3f73792d573899a62475 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 10 Aug 2012 13:56:27 -0700 Subject: [PATCH 0473/1098] spi/bcm63xx: Ensure that memory is freed only after it is no longer used The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce91..ea0aaa3f13d0 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -438,7 +438,7 @@ out: static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) { - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct bcm63xx_spi *bs = spi_master_get_devdata(master); spi_unregister_master(master); @@ -452,6 +452,8 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) platform_set_drvdata(pdev, 0); + spi_master_put(master); + return 0; } From c5491d1ae1946d394389b83b31b87708e86dc4cf Mon Sep 17 00:00:00 2001 From: Timo Kokkonen Date: Sun, 12 Aug 2012 13:45:34 +0300 Subject: [PATCH 0474/1098] ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() Calling omap_dm_timer_prepare while the spinlock is held is not allowed as sleeping functions are called later on during the preparation (namely within clk_get()). dm_timer_lock is only required for protecting the omap_timer_list. After the timer is marked as reserved, the lock is no longer needed and should be freed. Signed-off-by: Timo Kokkonen Cc: Tarun Kanti DebBarma Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7b6689af0cce..938b50a33439 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); From 3d61bd42135a5801ce6c2bc47f33277fde74e5ea Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jul 2012 20:11:44 -0400 Subject: [PATCH 0475/1098] drm/radeon: fix handling for ddc type 5 on combios When ddc type is 5, need to look up the i2c channel in the i2c table. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_combios.c | 57 ++++++++++++++++--------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 576f4f6919f2..f75247d42ffd 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -719,6 +719,34 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde return i2c; } +static struct radeon_i2c_bus_rec radeon_combios_get_i2c_info_from_table(struct radeon_device *rdev) +{ + struct drm_device *dev = rdev->ddev; + struct radeon_i2c_bus_rec i2c; + u16 offset; + u8 id, blocks, clk, data; + int i; + + i2c.valid = false; + + offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE); + if (offset) { + blocks = RBIOS8(offset + 2); + for (i = 0; i < blocks; i++) { + id = RBIOS8(offset + 3 + (i * 5) + 0); + if (id == 136) { + clk = RBIOS8(offset + 3 + (i * 5) + 3); + data = RBIOS8(offset + 3 + (i * 5) + 4); + /* gpiopad */ + i2c = combios_setup_i2c_bus(rdev, DDC_MONID, + (1 << clk), (1 << data)); + break; + } + } + } + return i2c; +} + void radeon_combios_i2c_init(struct radeon_device *rdev) { struct drm_device *dev = rdev->ddev; @@ -755,30 +783,14 @@ void radeon_combios_i2c_init(struct radeon_device *rdev) } else if (rdev->family == CHIP_RS300 || rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) { - u16 offset; - u8 id, blocks, clk, data; - int i; - /* 0x68 */ i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0); rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID"); - offset = combios_get_table_offset(dev, COMBIOS_I2C_INFO_TABLE); - if (offset) { - blocks = RBIOS8(offset + 2); - for (i = 0; i < blocks; i++) { - id = RBIOS8(offset + 3 + (i * 5) + 0); - if (id == 136) { - clk = RBIOS8(offset + 3 + (i * 5) + 3); - data = RBIOS8(offset + 3 + (i * 5) + 4); - /* gpiopad */ - i2c = combios_setup_i2c_bus(rdev, DDC_MONID, - (1 << clk), (1 << data)); - rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); - break; - } - } - } + /* gpiopad */ + i2c = radeon_combios_get_i2c_info_from_table(rdev); + if (i2c.valid) + rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK"); } else if ((rdev->family == CHIP_R200) || (rdev->family >= CHIP_R300)) { /* 0x68 */ @@ -2321,7 +2333,10 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) connector = (tmp >> 12) & 0xf; ddc_type = (tmp >> 8) & 0xf; - ddc_i2c = combios_setup_i2c_bus(rdev, ddc_type, 0, 0); + if (ddc_type == 5) + ddc_i2c = radeon_combios_get_i2c_info_from_table(rdev); + else + ddc_i2c = combios_setup_i2c_bus(rdev, ddc_type, 0, 0); switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: From f4254a2bb4555e26289a19b71bfa8a4965c5b5ee Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 10 Jul 2012 15:20:24 -0400 Subject: [PATCH 0476/1098] drm/radeon/dce4+: set a more reasonable cursor watermark Set a more reasonable default cursor watermark. The recommended default value is 4. This should reduce urgency requests to the MC form the display hw. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_cursor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 711e95ad39bf..8794744cdf1a 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -67,7 +67,8 @@ static void radeon_hide_cursor(struct drm_crtc *crtc) if (ASIC_IS_DCE4(rdev)) { WREG32(RADEON_MM_INDEX, EVERGREEN_CUR_CONTROL + radeon_crtc->crtc_offset); - WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT)); + WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT) | + EVERGREEN_CURSOR_URGENT_CONTROL(EVERGREEN_CURSOR_URGENT_1_2)); } else if (ASIC_IS_AVIVO(rdev)) { WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, (AVIVO_D1CURSOR_MODE_24BPP << AVIVO_D1CURSOR_MODE_SHIFT)); @@ -94,7 +95,8 @@ static void radeon_show_cursor(struct drm_crtc *crtc) if (ASIC_IS_DCE4(rdev)) { WREG32(RADEON_MM_INDEX, EVERGREEN_CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, EVERGREEN_CURSOR_EN | - EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT)); + EVERGREEN_CURSOR_MODE(EVERGREEN_CURSOR_24_8_PRE_MULT) | + EVERGREEN_CURSOR_URGENT_CONTROL(EVERGREEN_CURSOR_URGENT_1_2)); } else if (ASIC_IS_AVIVO(rdev)) { WREG32(RADEON_MM_INDEX, AVIVO_D1CUR_CONTROL + radeon_crtc->crtc_offset); WREG32(RADEON_MM_DATA, AVIVO_D1CURSOR_EN | From 3838f46e363d5a07e61d0352bf11d534dc61f921 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 Jul 2012 12:32:59 -0400 Subject: [PATCH 0477/1098] drm/radeon: properly handle SS overrides on TN (v2) The IntegratedSystemInfo table changed versions on TN. Update the SS override lookup to handle it. v2: fix copy-paste typo. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_atombios.c | 49 ++++++++++++++++++------ 1 file changed, 37 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index b1e3820df363..f9c21f9d16bc 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1263,6 +1263,8 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) union igp_info { struct _ATOM_INTEGRATED_SYSTEM_INFO info; struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 info_6; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 info_7; }; bool radeon_atombios_sideport_present(struct radeon_device *rdev) @@ -1390,27 +1392,50 @@ static void radeon_atombios_get_igp_ss_overrides(struct radeon_device *rdev, struct radeon_mode_info *mode_info = &rdev->mode_info; int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo); u16 data_offset, size; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 *igp_info; + union igp_info *igp_info; u8 frev, crev; u16 percentage = 0, rate = 0; /* get any igp specific overrides */ if (atom_parse_data_header(mode_info->atom_context, index, &size, &frev, &crev, &data_offset)) { - igp_info = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 *) + igp_info = (union igp_info *) (mode_info->atom_context->bios + data_offset); - switch (id) { - case ASIC_INTERNAL_SS_ON_TMDS: - percentage = le16_to_cpu(igp_info->usDVISSPercentage); - rate = le16_to_cpu(igp_info->usDVISSpreadRateIn10Hz); + switch (crev) { + case 6: + switch (id) { + case ASIC_INTERNAL_SS_ON_TMDS: + percentage = le16_to_cpu(igp_info->info_6.usDVISSPercentage); + rate = le16_to_cpu(igp_info->info_6.usDVISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_HDMI: + percentage = le16_to_cpu(igp_info->info_6.usHDMISSPercentage); + rate = le16_to_cpu(igp_info->info_6.usHDMISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_LVDS: + percentage = le16_to_cpu(igp_info->info_6.usLvdsSSPercentage); + rate = le16_to_cpu(igp_info->info_6.usLvdsSSpreadRateIn10Hz); + break; + } break; - case ASIC_INTERNAL_SS_ON_HDMI: - percentage = le16_to_cpu(igp_info->usHDMISSPercentage); - rate = le16_to_cpu(igp_info->usHDMISSpreadRateIn10Hz); + case 7: + switch (id) { + case ASIC_INTERNAL_SS_ON_TMDS: + percentage = le16_to_cpu(igp_info->info_7.usDVISSPercentage); + rate = le16_to_cpu(igp_info->info_7.usDVISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_HDMI: + percentage = le16_to_cpu(igp_info->info_7.usHDMISSPercentage); + rate = le16_to_cpu(igp_info->info_7.usHDMISSpreadRateIn10Hz); + break; + case ASIC_INTERNAL_SS_ON_LVDS: + percentage = le16_to_cpu(igp_info->info_7.usLvdsSSPercentage); + rate = le16_to_cpu(igp_info->info_7.usLvdsSSpreadRateIn10Hz); + break; + } break; - case ASIC_INTERNAL_SS_ON_LVDS: - percentage = le16_to_cpu(igp_info->usLvdsSSPercentage); - rate = le16_to_cpu(igp_info->usLvdsSSpreadRateIn10Hz); + default: + DRM_ERROR("Unsupported IGP table: %d %d\n", frev, crev); break; } if (percentage) From 6c0ae2ab85fc4a95cae82047a7db1f688a7737ab Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 26 Jul 2012 13:38:52 -0400 Subject: [PATCH 0478/1098] drm/radeon: properly handle crtc powergating Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 14 ++++++++++++-- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 4 ++++ drivers/gpu/drm/radeon/radeon_mode.h | 1 + 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9e6f76fec527..dc279ebf7afb 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -259,7 +259,7 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) /* adjust pm to dpms changes BEFORE enabling crtcs */ radeon_pm_compute_clocks(rdev); /* disable crtc pair power gating before programming */ - if (ASIC_IS_DCE6(rdev)) + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) atombios_powergate_crtc(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_ENABLE); if (ASIC_IS_DCE3(rdev) && !ASIC_IS_DCE6(rdev)) @@ -279,7 +279,7 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) atombios_enable_crtc(crtc, ATOM_DISABLE); radeon_crtc->enabled = false; /* power gating is per-pair */ - if (ASIC_IS_DCE6(rdev)) { + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) { struct drm_crtc *other_crtc; struct radeon_crtc *other_radeon_crtc; list_for_each_entry(other_crtc, &rdev->ddev->mode_config.crtc_list, head) { @@ -1635,18 +1635,28 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc, static void atombios_crtc_prepare(struct drm_crtc *crtc) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + radeon_crtc->in_mode_set = true; /* pick pll */ radeon_crtc->pll_id = radeon_atom_pick_pll(crtc); + /* disable crtc pair power gating before programming */ + if (ASIC_IS_DCE6(rdev)) + atombios_powergate_crtc(crtc, ATOM_DISABLE); + atombios_lock_crtc(crtc, ATOM_ENABLE); atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void atombios_crtc_commit(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON); atombios_lock_crtc(crtc, ATOM_DISABLE); + radeon_crtc->in_mode_set = false; } static void atombios_crtc_disable(struct drm_crtc *crtc) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d5fd615897ec..94b4a1c12893 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -1025,9 +1025,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, static void radeon_crtc_prepare(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; + radeon_crtc->in_mode_set = true; /* * The hardware wedges sometimes if you reconfigure one CRTC * whilst another is running (see fdo bug #24611). @@ -1038,6 +1040,7 @@ static void radeon_crtc_prepare(struct drm_crtc *crtc) static void radeon_crtc_commit(struct drm_crtc *crtc) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_crtc *crtci; @@ -1048,6 +1051,7 @@ static void radeon_crtc_commit(struct drm_crtc *crtc) if (crtci->enabled) radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON); } + radeon_crtc->in_mode_set = false; } static const struct drm_crtc_helper_funcs legacy_helper_funcs = { diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index f380d59c5763..d56978949f34 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -275,6 +275,7 @@ struct radeon_crtc { u16 lut_r[256], lut_g[256], lut_b[256]; bool enabled; bool can_tile; + bool in_mode_set; uint32_t crtc_offset; struct drm_gem_object *cursor_bo; uint64_t cursor_addr; From dca571a6a4edda1f61ba7ecb47431a22245490a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 31 Jul 2012 13:48:51 +0200 Subject: [PATCH 0479/1098] drm/radeon: fix bank tiling parameters on SI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c053f8193771..c153a7f359c8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -1639,11 +1639,19 @@ static void si_gpu_init(struct radeon_device *rdev) /* XXX what about 12? */ rdev->config.si.tile_config |= (3 << 0); break; - } - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.si.tile_config |= 1 << 4; - else + } + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.si.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.si.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.si.tile_config |= 2 << 4; + break; + } rdev->config.si.tile_config |= ((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8; rdev->config.si.tile_config |= From c8d15edc17d836686d1f071e564800e1a2724fa6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 11:01:10 -0400 Subject: [PATCH 0480/1098] drm/radeon: fix bank tiling parameters on evergreen Handle the 16 bank case. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e585a3b947eb..f4ef24f11419 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1986,10 +1986,18 @@ static void evergreen_gpu_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) rdev->config.evergreen.tile_config |= 1 << 4; else { - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.evergreen.tile_config |= 1 << 4; - else + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.evergreen.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.evergreen.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.evergreen.tile_config |= 2 << 4; + break; + } } rdev->config.evergreen.tile_config |= 0 << 8; rdev->config.evergreen.tile_config |= From 5b23c9045a8b61352986270b2d109edf5085e113 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 31 Jul 2012 11:05:11 -0400 Subject: [PATCH 0481/1098] drm/radeon: fix bank tiling parameters on cayman Handle the 16 bank case. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 9945d86d9001..853800e8582f 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -574,10 +574,18 @@ static void cayman_gpu_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) rdev->config.cayman.tile_config |= 1 << 4; else { - if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) - rdev->config.cayman.tile_config |= 1 << 4; - else + switch ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) { + case 0: /* four banks */ rdev->config.cayman.tile_config |= 0 << 4; + break; + case 1: /* eight banks */ + rdev->config.cayman.tile_config |= 1 << 4; + break; + case 2: /* sixteen banks */ + default: + rdev->config.cayman.tile_config |= 2 << 4; + break; + } } rdev->config.cayman.tile_config |= ((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8; From 81ee8fb6b52ec69eeed37fe7943446af1dccecc5 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 27 Jul 2012 16:32:24 -0400 Subject: [PATCH 0482/1098] drm/radeon: do not reenable crtc after moving vram start address It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Cc: Signed-off-by: Jerome Glisse --- drivers/gpu/drm/radeon/evergreen.c | 57 ---------------------------- drivers/gpu/drm/radeon/radeon_asic.h | 8 +--- drivers/gpu/drm/radeon/rv515.c | 13 ------- 3 files changed, 2 insertions(+), 76 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index f4ef24f11419..e93b80a6d4e9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1229,24 +1229,8 @@ void evergreen_agp_enable(struct radeon_device *rdev) void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *save) { - save->vga_control[0] = RREG32(D1VGA_CONTROL); - save->vga_control[1] = RREG32(D2VGA_CONTROL); save->vga_render_control = RREG32(VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); - save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET); - save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (rdev->num_crtc >= 4) { - save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); - save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); - save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET); - save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); - } - if (rdev->num_crtc >= 6) { - save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); - save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); - save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET); - save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); - } /* Stop all video */ WREG32(VGA_RENDER_CONTROL, 0); @@ -1357,47 +1341,6 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s /* Unlock host access */ WREG32(VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); - /* Restore video state */ - WREG32(D1VGA_CONTROL, save->vga_control[0]); - WREG32(D2VGA_CONTROL, save->vga_control[1]); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); - WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); - WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); - } - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); - } - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]); - WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]); - } - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (rdev->num_crtc >= 4) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); - } - if (rdev->num_crtc >= 6) { - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); - WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); - } WREG32(VGA_RENDER_CONTROL, save->vga_render_control); } diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index f4af24310438..0d445e7d00d1 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -255,13 +255,10 @@ extern int rs690_mc_wait_for_idle(struct radeon_device *rdev); * rv515 */ struct rv515_mc_save { - u32 d1vga_control; - u32 d2vga_control; u32 vga_render_control; u32 vga_hdp_control; - u32 d1crtc_control; - u32 d2crtc_control; }; + int rv515_init(struct radeon_device *rdev); void rv515_fini(struct radeon_device *rdev); uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg); @@ -389,11 +386,10 @@ void r700_cp_fini(struct radeon_device *rdev); * evergreen */ struct evergreen_mc_save { - u32 vga_control[6]; u32 vga_render_control; u32 vga_hdp_control; - u32 crtc_control[6]; }; + void evergreen_pcie_gart_tlb_flush(struct radeon_device *rdev); int evergreen_init(struct radeon_device *rdev); void evergreen_fini(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index a12fbcc8ccb6..aa8ef491ef3c 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -281,12 +281,8 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev) void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) { - save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL); - save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL); save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL); - save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL); - save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL); /* Stop all video */ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); @@ -311,15 +307,6 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) /* Unlock host access */ WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); - /* Restore video state */ - WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); - WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); - WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); - WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); - WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control); - WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control); - WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); - WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control); } From ecd67955fd4c8e66e4df312098989d5fa7da624c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 6 Aug 2012 17:06:03 -0400 Subject: [PATCH 0483/1098] drm/radeon: fix ordering in pll picking on dce4+ No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index dc279ebf7afb..c6fcb5b86a45 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1531,12 +1531,12 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) * crtc virtual pixel clock. */ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - if (ASIC_IS_DCE5(rdev)) - return ATOM_DCPLL; + if (rdev->clock.dp_extclk) + return ATOM_PPLL_INVALID; else if (ASIC_IS_DCE6(rdev)) return ATOM_PPLL0; - else if (rdev->clock.dp_extclk) - return ATOM_PPLL_INVALID; + else if (ASIC_IS_DCE5(rdev)) + return ATOM_DCPLL; } } } From 2f292004dd1fb005788dc0a9cdd5559812ed866e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 6 Aug 2012 10:03:59 -0400 Subject: [PATCH 0484/1098] drm/radeon: add some new SI pci ids Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- include/drm/drm_pciids.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 7ff5c99b1638..c78bb997e2c6 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -213,9 +213,12 @@ {0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6801, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6802, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6819, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ From 69b62ad8a488727d5aab931c238aa399e6c3550c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 3 Aug 2012 11:50:54 -0400 Subject: [PATCH 0485/1098] drm/radeon: fix some missing parens in asic macros Better safe than sorry. Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse --- drivers/gpu/drm/radeon/radeon.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 5431af292408..583e0f19e1c7 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1733,11 +1733,11 @@ void radeon_ring_write(struct radeon_ring *ring, uint32_t v); #define radeon_pm_finish(rdev) (rdev)->asic->pm.finish((rdev)) #define radeon_pm_init_profile(rdev) (rdev)->asic->pm.init_profile((rdev)) #define radeon_pm_get_dynpm_state(rdev) (rdev)->asic->pm.get_dynpm_state((rdev)) -#define radeon_pre_page_flip(rdev, crtc) rdev->asic->pflip.pre_page_flip((rdev), (crtc)) -#define radeon_page_flip(rdev, crtc, base) rdev->asic->pflip.page_flip((rdev), (crtc), (base)) -#define radeon_post_page_flip(rdev, crtc) rdev->asic->pflip.post_page_flip((rdev), (crtc)) -#define radeon_wait_for_vblank(rdev, crtc) rdev->asic->display.wait_for_vblank((rdev), (crtc)) -#define radeon_mc_wait_for_idle(rdev) rdev->asic->mc_wait_for_idle((rdev)) +#define radeon_pre_page_flip(rdev, crtc) (rdev)->asic->pflip.pre_page_flip((rdev), (crtc)) +#define radeon_page_flip(rdev, crtc, base) (rdev)->asic->pflip.page_flip((rdev), (crtc), (base)) +#define radeon_post_page_flip(rdev, crtc) (rdev)->asic->pflip.post_page_flip((rdev), (crtc)) +#define radeon_wait_for_vblank(rdev, crtc) (rdev)->asic->display.wait_for_vblank((rdev), (crtc)) +#define radeon_mc_wait_for_idle(rdev) (rdev)->asic->mc_wait_for_idle((rdev)) /* Common functions */ /* AGP */ From e43b5ec05afdc232be25aa481315035c1888d389 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 6 Aug 2012 12:32:21 -0400 Subject: [PATCH 0486/1098] drm/radeon: fence virtual address and free it once idle v4 Virtual address need to be fenced to know when we can safely remove it. This patch also properly clear the pagetable. Previously it was serouisly broken. Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking. v2: For to update pagetable when unbinding bo (don't bailout if bo_va->valid is true). v3: Add kernel 3.5/3.4 comment. v4: Fix compilation warnings. Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_cs.c | 32 +++++++++++++++++++++++--- drivers/gpu/drm/radeon/radeon_gart.c | 24 +++++++++++++++++-- drivers/gpu/drm/radeon/radeon_gem.c | 13 ++--------- drivers/gpu/drm/radeon/radeon_object.c | 6 +---- 5 files changed, 55 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 583e0f19e1c7..b237a29142d1 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -300,6 +300,7 @@ struct radeon_bo_va { uint64_t soffset; uint64_t eoffset; uint32_t flags; + struct radeon_fence *fence; bool valid; }; diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 8a4c49ef0cc4..b4a0db24f4dd 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -278,6 +278,30 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data) return 0; } +static void radeon_bo_vm_fence_va(struct radeon_cs_parser *parser, + struct radeon_fence *fence) +{ + struct radeon_fpriv *fpriv = parser->filp->driver_priv; + struct radeon_vm *vm = &fpriv->vm; + struct radeon_bo_list *lobj; + + if (parser->chunk_ib_idx == -1) { + return; + } + if ((parser->cs_flags & RADEON_CS_USE_VM) == 0) { + return; + } + + list_for_each_entry(lobj, &parser->validated, tv.head) { + struct radeon_bo_va *bo_va; + struct radeon_bo *rbo = lobj->bo; + + bo_va = radeon_bo_va(rbo, vm); + radeon_fence_unref(&bo_va->fence); + bo_va->fence = radeon_fence_ref(fence); + } +} + /** * cs_parser_fini() - clean parser states * @parser: parser structure holding parsing context. @@ -290,11 +314,14 @@ static void radeon_cs_parser_fini(struct radeon_cs_parser *parser, int error) { unsigned i; - if (!error) + if (!error) { + /* fence all bo va before ttm_eu_fence_buffer_objects so bo are still reserved */ + radeon_bo_vm_fence_va(parser, parser->ib.fence); ttm_eu_fence_buffer_objects(&parser->validated, parser->ib.fence); - else + } else { ttm_eu_backoff_reservation(&parser->validated); + } if (parser->relocs != NULL) { for (i = 0; i < parser->nrelocs; i++) { @@ -388,7 +415,6 @@ static int radeon_cs_ib_vm_chunk(struct radeon_device *rdev, if (parser->chunk_ib_idx == -1) return 0; - if ((parser->cs_flags & RADEON_CS_USE_VM) == 0) return 0; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index b3720054614d..9912182682ec 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -814,7 +814,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, return -EINVAL; } - if (bo_va->valid) + if (bo_va->valid && mem) return 0; ngpu_pages = radeon_bo_ngpu_pages(bo); @@ -859,11 +859,27 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, struct radeon_bo *bo) { struct radeon_bo_va *bo_va; + int r; bo_va = radeon_bo_va(bo, vm); if (bo_va == NULL) return 0; + /* wait for va use to end */ + while (bo_va->fence) { + r = radeon_fence_wait(bo_va->fence, false); + if (r) { + DRM_ERROR("error while waiting for fence: %d\n", r); + } + if (r == -EDEADLK) { + r = radeon_gpu_reset(rdev); + if (!r) + continue; + } + break; + } + radeon_fence_unref(&bo_va->fence); + mutex_lock(&rdev->vm_manager.lock); mutex_lock(&vm->mutex); radeon_vm_bo_update_pte(rdev, vm, bo, NULL); @@ -952,12 +968,15 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) radeon_vm_unbind_locked(rdev, vm); mutex_unlock(&rdev->vm_manager.lock); - /* remove all bo */ + /* remove all bo at this point non are busy any more because unbind + * waited for the last vm fence to signal + */ r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); if (!r) { bo_va = radeon_bo_va(rdev->ring_tmp_bo.bo, vm); list_del_init(&bo_va->bo_list); list_del_init(&bo_va->vm_list); + radeon_fence_unref(&bo_va->fence); radeon_bo_unreserve(rdev->ring_tmp_bo.bo); kfree(bo_va); } @@ -969,6 +988,7 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) r = radeon_bo_reserve(bo_va->bo, false); if (!r) { list_del_init(&bo_va->bo_list); + radeon_fence_unref(&bo_va->fence); radeon_bo_unreserve(bo_va->bo); kfree(bo_va); } diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 84d045245739..1b57b0058ad6 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -134,25 +134,16 @@ void radeon_gem_object_close(struct drm_gem_object *obj, struct radeon_device *rdev = rbo->rdev; struct radeon_fpriv *fpriv = file_priv->driver_priv; struct radeon_vm *vm = &fpriv->vm; - struct radeon_bo_va *bo_va, *tmp; if (rdev->family < CHIP_CAYMAN) { return; } if (radeon_bo_reserve(rbo, false)) { + dev_err(rdev->dev, "leaking bo va because we fail to reserve bo\n"); return; } - list_for_each_entry_safe(bo_va, tmp, &rbo->va, bo_list) { - if (bo_va->vm == vm) { - /* remove from this vm address space */ - mutex_lock(&vm->mutex); - list_del(&bo_va->vm_list); - mutex_unlock(&vm->mutex); - list_del(&bo_va->bo_list); - kfree(bo_va); - } - } + radeon_vm_bo_rmv(rdev, vm, rbo); radeon_bo_unreserve(rbo); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1f1a4c803c1d..1cb014b571ab 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -52,11 +52,7 @@ void radeon_bo_clear_va(struct radeon_bo *bo) list_for_each_entry_safe(bo_va, tmp, &bo->va, bo_list) { /* remove from all vm address space */ - mutex_lock(&bo_va->vm->mutex); - list_del(&bo_va->vm_list); - mutex_unlock(&bo_va->vm->mutex); - list_del(&bo_va->bo_list); - kfree(bo_va); + radeon_vm_bo_rmv(bo->rdev, bo_va->vm, bo); } } From f00245f182fab57c5eed28a50764600b2bf1ccdb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Thu, 9 Aug 2012 16:34:15 +0200 Subject: [PATCH 0487/1098] drm/radeon/kms: reorder code in r600_check_texture_resource MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marek Olšák Reviewed-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 52 ++++++++++++++++---------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 1119e31e5c2f..ff61402ef795 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1559,13 +1559,14 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, u32 tiling_flags) { struct r600_cs_track *track = p->track; - u32 nfaces, llevel, blevel, w0, h0, d0; - u32 word0, word1, l0_size, mipmap_size, word2, word3; + u32 dim, nfaces, llevel, blevel, w0, h0, d0; + u32 word0, word1, l0_size, mipmap_size, word2, word3, word4, word5; u32 height_align, pitch, pitch_align, depth_align; - u32 array, barray, larray; + u32 barray, larray; u64 base_align; struct array_mode_checker array_check; u32 format; + bool is_array; /* on legacy kernel we don't perform advanced check */ if (p->rdev == NULL) @@ -1583,12 +1584,28 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1); } word1 = radeon_get_ib_value(p, idx + 1); + word2 = radeon_get_ib_value(p, idx + 2) << 8; + word3 = radeon_get_ib_value(p, idx + 3) << 8; + word4 = radeon_get_ib_value(p, idx + 4); + word5 = radeon_get_ib_value(p, idx + 5); + dim = G_038000_DIM(word0); w0 = G_038000_TEX_WIDTH(word0) + 1; + pitch = (G_038000_PITCH(word0) + 1) * 8; h0 = G_038004_TEX_HEIGHT(word1) + 1; d0 = G_038004_TEX_DEPTH(word1); + format = G_038004_DATA_FORMAT(word1); + blevel = G_038010_BASE_LEVEL(word4); + llevel = G_038014_LAST_LEVEL(word5); + /* pitch in texels */ + array_check.array_mode = G_038000_TILE_MODE(word0); + array_check.group_size = track->group_size; + array_check.nbanks = track->nbanks; + array_check.npipes = track->npipes; + array_check.nsamples = 1; + array_check.blocksize = r600_fmt_get_blocksize(format); nfaces = 1; - array = 0; - switch (G_038000_DIM(word0)) { + is_array = false; + switch (dim) { case V_038000_SQ_TEX_DIM_1D: case V_038000_SQ_TEX_DIM_2D: case V_038000_SQ_TEX_DIM_3D: @@ -1601,7 +1618,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, break; case V_038000_SQ_TEX_DIM_1D_ARRAY: case V_038000_SQ_TEX_DIM_2D_ARRAY: - array = 1; + is_array = true; break; case V_038000_SQ_TEX_DIM_2D_MSAA: case V_038000_SQ_TEX_DIM_2D_ARRAY_MSAA: @@ -1609,21 +1626,12 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, dev_warn(p->dev, "this kernel doesn't support %d texture dim\n", G_038000_DIM(word0)); return -EINVAL; } - format = G_038004_DATA_FORMAT(word1); if (!r600_fmt_is_valid_texture(format, p->family)) { dev_warn(p->dev, "%s:%d texture invalid format %d\n", __func__, __LINE__, format); return -EINVAL; } - /* pitch in texels */ - pitch = (G_038000_PITCH(word0) + 1) * 8; - array_check.array_mode = G_038000_TILE_MODE(word0); - array_check.group_size = track->group_size; - array_check.nbanks = track->nbanks; - array_check.npipes = track->npipes; - array_check.nsamples = 1; - array_check.blocksize = r600_fmt_get_blocksize(format); if (r600_get_array_mode_alignment(&array_check, &pitch_align, &height_align, &depth_align, &base_align)) { dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n", @@ -1649,20 +1657,13 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, return -EINVAL; } - word2 = radeon_get_ib_value(p, idx + 2) << 8; - word3 = radeon_get_ib_value(p, idx + 3) << 8; - - word0 = radeon_get_ib_value(p, idx + 4); - word1 = radeon_get_ib_value(p, idx + 5); - blevel = G_038010_BASE_LEVEL(word0); - llevel = G_038014_LAST_LEVEL(word1); if (blevel > llevel) { dev_warn(p->dev, "texture blevel %d > llevel %d\n", blevel, llevel); } - if (array == 1) { - barray = G_038014_BASE_ARRAY(word1); - larray = G_038014_LAST_ARRAY(word1); + if (is_array) { + barray = G_038014_BASE_ARRAY(word5); + larray = G_038014_LAST_ARRAY(word5); nfaces = larray - barray + 1; } @@ -1679,7 +1680,6 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, return -EINVAL; } /* using get ib will give us the offset into the mipmap bo */ - word3 = radeon_get_ib_value(p, idx + 3) << 8; if ((mipmap_size + word3) > radeon_bo_size(mipmap)) { /*dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n", w0, h0, format, blevel, nlevels, word3, mipmap_size, radeon_bo_size(texture));*/ From b51ad12a36234c1f6707c9c54a414cfca23f3cdb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Thu, 9 Aug 2012 16:34:16 +0200 Subject: [PATCH 0488/1098] drm/radeon/kms: add MSAA texture support for r600-evergreen MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Most of the checking seems to be in place already. As you can see, log2(number of samples) resides in LAST_LEVEL. This is required for MSAA support (namely for depth-stencil resolve and blitting between MSAA resources). Signed-off-by: Marek Olšák Reviewed-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_cs.c | 7 +++++++ drivers/gpu/drm/radeon/r600_cs.c | 7 ++++++- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index f2e5c545c973..e44a62a07fe3 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -788,6 +788,13 @@ static int evergreen_cs_track_validate_texture(struct radeon_cs_parser *p, case V_030000_SQ_TEX_DIM_1D_ARRAY: case V_030000_SQ_TEX_DIM_2D_ARRAY: depth = 1; + break; + case V_030000_SQ_TEX_DIM_2D_MSAA: + case V_030000_SQ_TEX_DIM_2D_ARRAY_MSAA: + surf.nsamples = 1 << llevel; + llevel = 0; + depth = 1; + break; case V_030000_SQ_TEX_DIM_3D: break; default: diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index ff61402ef795..3dab49cb1d4a 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1620,8 +1620,13 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, case V_038000_SQ_TEX_DIM_2D_ARRAY: is_array = true; break; - case V_038000_SQ_TEX_DIM_2D_MSAA: case V_038000_SQ_TEX_DIM_2D_ARRAY_MSAA: + is_array = true; + /* fall through */ + case V_038000_SQ_TEX_DIM_2D_MSAA: + array_check.nsamples = 1 << llevel; + llevel = 0; + break; default: dev_warn(p->dev, "this kernel doesn't support %d texture dim\n", G_038000_DIM(word0)); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 4b736ecb0aa5..a7f8ac0d8f03 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -60,9 +60,10 @@ * 2.16.0 - fix evergreen 2D tiled surface calculation * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx * 2.18.0 - r600-eg: allow "invalid" DB formats + * 2.19.0 - r600-eg: MSAA textures */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 18 +#define KMS_DRIVER_MINOR 19 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); From 6759a0a7a0496dbbd4fb062c6a76d61c55d0fbd9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Thu, 9 Aug 2012 16:34:17 +0200 Subject: [PATCH 0489/1098] drm/radeon/kms: implement timestamp userspace query (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák Reviewed-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600.c | 20 +++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 3 +++ drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_asic.h | 2 ++ drivers/gpu/drm/radeon/radeon_device.c | 1 + drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/radeon_kms.c | 35 +++++++++++++++++++++----- drivers/gpu/drm/radeon/si.c | 19 ++++++++++++++ drivers/gpu/drm/radeon/sid.h | 3 +++ include/drm/radeon_drm.h | 2 ++ 10 files changed, 82 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 637280f541a3..d79c639ae739 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3789,3 +3789,23 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) WREG32_PCIE_P(PCIE_LC_LINK_WIDTH_CNTL, link_width_cntl); } } + +/** + * r600_get_gpu_clock - return GPU clock counter snapshot + * + * @rdev: radeon_device pointer + * + * Fetches a GPU clock counter snapshot (R6xx-cayman). + * Returns the 64 bit clock counter snapshot. + */ +uint64_t r600_get_gpu_clock(struct radeon_device *rdev) +{ + uint64_t clock; + + mutex_lock(&rdev->gpu_clock_mutex); + WREG32(RLC_CAPTURE_GPU_CLOCK_COUNT, 1); + clock = (uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_LSB) | + ((uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_MSB) << 32ULL); + mutex_unlock(&rdev->gpu_clock_mutex); + return clock; +} diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 4b116ae75fc2..fd328f4c3ea8 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -602,6 +602,9 @@ #define RLC_HB_WPTR 0x3f1c #define RLC_HB_WPTR_LSB_ADDR 0x3f14 #define RLC_HB_WPTR_MSB_ADDR 0x3f18 +#define RLC_GPU_CLOCK_COUNT_LSB 0x3f38 +#define RLC_GPU_CLOCK_COUNT_MSB 0x3f3c +#define RLC_CAPTURE_GPU_CLOCK_COUNT 0x3f40 #define RLC_MC_CNTL 0x3f44 #define RLC_UCODE_CNTL 0x3f48 #define RLC_UCODE_ADDR 0x3f2c diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b237a29142d1..99304194a65c 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1534,6 +1534,7 @@ struct radeon_device { unsigned debugfs_count; /* virtual memory */ struct radeon_vm_manager vm_manager; + struct mutex gpu_clock_mutex; }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 0d445e7d00d1..18c38d14c8cd 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -368,6 +368,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, unsigned num_gpu_pages, struct radeon_sa_bo *vb); int r600_mc_wait_for_idle(struct radeon_device *rdev); +uint64_t r600_get_gpu_clock(struct radeon_device *rdev); /* * rv770,rv730,rv710,rv740 @@ -468,5 +469,6 @@ int si_vm_bind(struct radeon_device *rdev, struct radeon_vm *vm, int id); void si_vm_unbind(struct radeon_device *rdev, struct radeon_vm *vm); void si_vm_tlb_flush(struct radeon_device *rdev, struct radeon_vm *vm); int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib); +uint64_t si_get_gpu_clock(struct radeon_device *rdev); #endif diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 742af8244e89..d2e243867ac6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1009,6 +1009,7 @@ int radeon_device_init(struct radeon_device *rdev, atomic_set(&rdev->ih.lock, 0); mutex_init(&rdev->gem.mutex); mutex_init(&rdev->pm.mutex); + mutex_init(&rdev->gpu_clock_mutex); init_rwsem(&rdev->pm.mclk_lock); init_rwsem(&rdev->exclusive_lock); init_waitqueue_head(&rdev->irq.vblank_queue); diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index a7f8ac0d8f03..d7269f48d37c 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -61,9 +61,10 @@ * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx * 2.18.0 - r600-eg: allow "invalid" DB formats * 2.19.0 - r600-eg: MSAA textures + * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 19 +#define KMS_DRIVER_MINOR 20 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 1d73f16b5d97..414b4acf6947 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -29,6 +29,7 @@ #include "drm_sarea.h" #include "radeon.h" #include "radeon_drm.h" +#include "radeon_asic.h" #include #include @@ -167,17 +168,39 @@ static void radeon_set_filp_rights(struct drm_device *dev, int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) { struct radeon_device *rdev = dev->dev_private; - struct drm_radeon_info *info; + struct drm_radeon_info *info = data; struct radeon_mode_info *minfo = &rdev->mode_info; - uint32_t *value_ptr; - uint32_t value; + uint32_t value, *value_ptr; + uint64_t value64, *value_ptr64; struct drm_crtc *crtc; int i, found; - info = data; + /* TIMESTAMP is a 64-bit value, needs special handling. */ + if (info->request == RADEON_INFO_TIMESTAMP) { + if (rdev->family >= CHIP_R600) { + value_ptr64 = (uint64_t*)((unsigned long)info->value); + if (rdev->family >= CHIP_TAHITI) { + value64 = si_get_gpu_clock(rdev); + } else { + value64 = r600_get_gpu_clock(rdev); + } + + if (DRM_COPY_TO_USER(value_ptr64, &value64, sizeof(value64))) { + DRM_ERROR("copy_to_user %s:%u\n", __func__, __LINE__); + return -EFAULT; + } + return 0; + } else { + DRM_DEBUG_KMS("timestamp is r6xx+ only!\n"); + return -EINVAL; + } + } + value_ptr = (uint32_t *)((unsigned long)info->value); - if (DRM_COPY_FROM_USER(&value, value_ptr, sizeof(value))) + if (DRM_COPY_FROM_USER(&value, value_ptr, sizeof(value))) { + DRM_ERROR("copy_from_user %s:%u\n", __func__, __LINE__); return -EFAULT; + } switch (info->request) { case RADEON_INFO_DEVICE_ID: @@ -337,7 +360,7 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) return -EINVAL; } if (DRM_COPY_TO_USER(value_ptr, &value, sizeof(uint32_t))) { - DRM_ERROR("copy_to_user\n"); + DRM_ERROR("copy_to_user %s:%u\n", __func__, __LINE__); return -EFAULT; } return 0; diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c153a7f359c8..0139e227e3c7 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3968,3 +3968,22 @@ void si_fini(struct radeon_device *rdev) rdev->bios = NULL; } +/** + * si_get_gpu_clock - return GPU clock counter snapshot + * + * @rdev: radeon_device pointer + * + * Fetches a GPU clock counter snapshot (SI). + * Returns the 64 bit clock counter snapshot. + */ +uint64_t si_get_gpu_clock(struct radeon_device *rdev) +{ + uint64_t clock; + + mutex_lock(&rdev->gpu_clock_mutex); + WREG32(RLC_CAPTURE_GPU_CLOCK_COUNT, 1); + clock = (uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_LSB) | + ((uint64_t)RREG32(RLC_GPU_CLOCK_COUNT_MSB) << 32ULL); + mutex_unlock(&rdev->gpu_clock_mutex); + return clock; +} diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 7869089e8761..ef4815c27b1c 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -698,6 +698,9 @@ #define RLC_UCODE_ADDR 0xC32C #define RLC_UCODE_DATA 0xC330 +#define RLC_GPU_CLOCK_COUNT_LSB 0xC338 +#define RLC_GPU_CLOCK_COUNT_MSB 0xC33C +#define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC340 #define RLC_MC_CNTL 0xC344 #define RLC_UCODE_CNTL 0xC348 diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index 58056865b8e9..dc3a8cd7db8a 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -964,6 +964,8 @@ struct drm_radeon_cs { #define RADEON_INFO_IB_VM_MAX_SIZE 0x0f /* max pipes - needed for compute shaders */ #define RADEON_INFO_MAX_PIPES 0x10 +/* timestamp for GL_ARB_timer_query (OpenGL), returns the current GPU clock */ +#define RADEON_INFO_TIMESTAMP 0x11 struct drm_radeon_info { uint32_t request; From f59abbf28696389c91c2697c7db31f20cfa91d8a Mon Sep 17 00:00:00 2001 From: Dmitrii Cherkasov Date: Mon, 13 Aug 2012 10:53:29 -0400 Subject: [PATCH 0490/1098] drm/radeon: fix typo in function header comment Signed-off-by: Dmitrii Cherkasov Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_gart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 9912182682ec..bb3b7fe05ccd 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -950,7 +950,7 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) } /** - * radeon_vm_init - tear down a vm instance + * radeon_vm_fini - tear down a vm instance * * @rdev: radeon_device pointer * @vm: requested vm From a35b6466aabb051568b844e8c63f87a356d3d129 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 8 Aug 2012 21:46:40 +0200 Subject: [PATCH 0491/1098] sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies Peter Portante reported that for large cgroup hierarchies (and or on large CPU counts) we get immense lock contention on rq->lock and stuff stops working properly. His workload was a ton of processes, each in their own cgroup, everybody idling except for a sporadic wakeup once every so often. It was found that: schedule() idle_balance() load_balance() local_irq_save() double_rq_lock() update_h_load() walk_tg_tree(tg_load_down) tg_load_down() Results in an entire cgroup hierarchy walk under rq->lock for every new-idle balance and since new-idle balance isn't throttled this results in a lot of work while holding the rq->lock. This patch does two things, it removes the work from under rq->lock based on the good principle of race and pray which is widely employed in the load-balancer as a whole. And secondly it throttles the update_h_load() calculation to max once per jiffy. I considered excluding update_h_load() for new-idle balance all-together, but purely relying on regular balance passes to update this data might not work out under some rare circumstances where the new-idle busiest isn't the regular busiest for a while (unlikely, but a nightmare to debug if someone hits it and suffers). Cc: pjt@google.com Cc: Larry Woodman Cc: Mike Galbraith Reported-by: Peter Portante Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-aaarrzfpnaam7pqrekofu8a6@git.kernel.org Signed-off-by: Thomas Gleixner --- kernel/sched/fair.c | 11 +++++++++-- kernel/sched/sched.h | 6 +++++- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index d0cc03b3e70b..c219bf8d704c 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3387,6 +3387,14 @@ static int tg_load_down(struct task_group *tg, void *data) static void update_h_load(long cpu) { + struct rq *rq = cpu_rq(cpu); + unsigned long now = jiffies; + + if (rq->h_load_throttle == now) + return; + + rq->h_load_throttle = now; + rcu_read_lock(); walk_tg_tree(tg_load_down, tg_nop, (void *)cpu); rcu_read_unlock(); @@ -4293,11 +4301,10 @@ redo: env.src_rq = busiest; env.loop_max = min(sysctl_sched_nr_migrate, busiest->nr_running); + update_h_load(env.src_cpu); more_balance: local_irq_save(flags); double_rq_lock(this_rq, busiest); - if (!env.loop) - update_h_load(env.src_cpu); /* * cur_ld_moved - load moved in current iteration diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index c35a1a7dd4d6..531411b1044e 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -374,7 +374,11 @@ struct rq { #ifdef CONFIG_FAIR_GROUP_SCHED /* list of leaf cfs_rq on this cpu: */ struct list_head leaf_cfs_rq_list; -#endif +#ifdef CONFIG_SMP + unsigned long h_load_throttle; +#endif /* CONFIG_SMP */ +#endif /* CONFIG_FAIR_GROUP_SCHED */ + #ifdef CONFIG_RT_GROUP_SCHED struct list_head leaf_rt_rq_list; #endif From bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Aug 2012 11:27:15 +0200 Subject: [PATCH 0492/1098] sched: fix divide by zero at {thread_group,task}_times On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner --- kernel/sched/core.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 2cb4e7777998..e2c5841c7dfe 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3142,6 +3142,20 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st) # define nsecs_to_cputime(__nsecs) nsecs_to_jiffies(__nsecs) #endif +static cputime_t scale_utime(cputime_t utime, cputime_t rtime, cputime_t total) +{ + u64 temp = (__force u64) rtime; + + temp *= (__force u64) utime; + + if (sizeof(cputime_t) == 4) + temp = div_u64(temp, (__force u32) total); + else + temp = div64_u64(temp, (__force u64) total); + + return (__force cputime_t) temp; +} + void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st) { cputime_t rtime, utime = p->utime, total = utime + p->stime; @@ -3151,13 +3165,9 @@ void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st) */ rtime = nsecs_to_cputime(p->se.sum_exec_runtime); - if (total) { - u64 temp = (__force u64) rtime; - - temp *= (__force u64) utime; - do_div(temp, (__force u32) total); - utime = (__force cputime_t) temp; - } else + if (total) + utime = scale_utime(utime, rtime, total); + else utime = rtime; /* @@ -3184,13 +3194,9 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st) total = cputime.utime + cputime.stime; rtime = nsecs_to_cputime(cputime.sum_exec_runtime); - if (total) { - u64 temp = (__force u64) rtime; - - temp *= (__force u64) cputime.utime; - do_div(temp, (__force u32) total); - utime = (__force cputime_t) temp; - } else + if (total) + utime = scale_utime(cputime.utime, rtime, total); + else utime = rtime; sig->prev_utime = max(sig->prev_utime, utime); From 35cf4e50b16331def6cfcbee11e49270b6db07f5 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 7 Aug 2012 05:00:13 +0200 Subject: [PATCH 0493/1098] sched,cgroup: Fix up task_groups list With multiple instances of task_groups, for_each_rt_rq() is a noop, no task groups having been added to the rt.c list instance. This renders __enable/disable_runtime() and print_rt_stats() noop, the user (non) visible effect being that rt task groups are missing in /proc/sched_debug. Signed-off-by: Mike Galbraith Cc: stable@kernel.org # v3.3+ Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344308413.6846.7.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/core.c | 1 + kernel/sched/sched.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e2c5841c7dfe..6aa212f3c581 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7252,6 +7252,7 @@ int in_sched_functions(unsigned long addr) #ifdef CONFIG_CGROUP_SCHED struct task_group root_task_group; +LIST_HEAD(task_groups); #endif DECLARE_PER_CPU(cpumask_var_t, load_balance_tmpmask); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 531411b1044e..f6714d009e77 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -80,7 +80,7 @@ extern struct mutex sched_domains_mutex; struct cfs_rq; struct rt_rq; -static LIST_HEAD(task_groups); +extern struct list_head task_groups; struct cfs_bandwidth { #ifdef CONFIG_CFS_BANDWIDTH From e221d028bb08b47e624c5f0a31732c642db9d19a Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 7 Aug 2012 10:02:38 +0200 Subject: [PATCH 0494/1098] sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled Root task group bandwidth replenishment must service all CPUs, regardless of where the timer was last started, and regardless of the isolation mechanism, lest 'Quoth the Raven, "Nevermore"' become rt scheduling policy. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344326558.6968.25.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/rt.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 573e1ca01102..944cb68420e9 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -788,6 +788,19 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) const struct cpumask *span; span = sched_rt_period_mask(); +#ifdef CONFIG_RT_GROUP_SCHED + /* + * FIXME: isolated CPUs should really leave the root task group, + * whether they are isolcpus or were isolated via cpusets, lest + * the timer run on a CPU which does not service all runqueues, + * potentially leaving other CPUs indefinitely throttled. If + * isolation is really required, the user will turn the throttle + * off to kill the perturbations it causes anyway. Meanwhile, + * this maintains functionality for boot and/or troubleshooting. + */ + if (rt_b == &root_task_group.rt_bandwidth) + span = cpu_online_mask; +#endif for_each_cpu(i, span) { int enqueue = 0; struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i); From 8f6189684eb4e85e6c593cd710693f09c944450a Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Sat, 4 Aug 2012 05:44:14 +0200 Subject: [PATCH 0495/1098] sched: Fix migration thread runtime bogosity Make stop scheduler class do the same accounting as other classes, Migration threads can be caught in the act while doing exec balancing, leading to the below due to use of unmaintained ->se.exec_start. The load that triggered this particular instance was an apparently out of control heavily threaded application that does system monitoring in what equated to an exec bomb, with one of the VERY frequently migrated tasks being ps. %CPU PID USER CMD 99.3 45 root [migration/10] 97.7 53 root [migration/12] 97.0 57 root [migration/13] 90.1 49 root [migration/11] 89.6 65 root [migration/15] 88.7 17 root [migration/3] 80.4 37 root [migration/8] 78.1 41 root [migration/9] 44.2 13 root [migration/2] Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344051854.6739.19.camel@marge.simpson.net Signed-off-by: Thomas Gleixner --- kernel/sched/stop_task.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/kernel/sched/stop_task.c b/kernel/sched/stop_task.c index 7b386e86fd23..da5eb5bed84a 100644 --- a/kernel/sched/stop_task.c +++ b/kernel/sched/stop_task.c @@ -27,8 +27,10 @@ static struct task_struct *pick_next_task_stop(struct rq *rq) { struct task_struct *stop = rq->stop; - if (stop && stop->on_rq) + if (stop && stop->on_rq) { + stop->se.exec_start = rq->clock_task; return stop; + } return NULL; } @@ -52,6 +54,21 @@ static void yield_task_stop(struct rq *rq) static void put_prev_task_stop(struct rq *rq, struct task_struct *prev) { + struct task_struct *curr = rq->curr; + u64 delta_exec; + + delta_exec = rq->clock_task - curr->se.exec_start; + if (unlikely((s64)delta_exec < 0)) + delta_exec = 0; + + schedstat_set(curr->se.statistics.exec_max, + max(curr->se.statistics.exec_max, delta_exec)); + + curr->se.sum_exec_runtime += delta_exec; + account_group_exec_runtime(curr, delta_exec); + + curr->se.exec_start = rq->clock_task; + cpuacct_charge(curr, delta_exec); } static void task_tick_stop(struct rq *rq, struct task_struct *curr, int queued) @@ -60,6 +77,9 @@ static void task_tick_stop(struct rq *rq, struct task_struct *curr, int queued) static void set_curr_task_stop(struct rq *rq) { + struct task_struct *stop = rq->stop; + + stop->se.exec_start = rq->clock_task; } static void switched_to_stop(struct rq *rq, struct task_struct *p) From 0bce9c46bf3b15f485d82d7e81dabed6ebcc24b1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 15:22:09 +0100 Subject: [PATCH 0496/1098] mutex: Place lock in contended state after fastpath_lock failure ARM recently moved to asm-generic/mutex-xchg.h for its mutex implementation after the previous implementation was found to be missing some crucial memory barriers. However, this has revealed some problems running hackbench on SMP platforms due to the way in which the MUTEX_SPIN_ON_OWNER code operates. The symptoms are that a bunch of hackbench tasks are left waiting on an unlocked mutex and therefore never get woken up to claim it. This boils down to the following sequence of events: Task A Task B Task C Lock value 0 1 1 lock() 0 2 lock() 0 3 spin(A) 0 4 unlock() 1 5 lock() 0 6 cmpxchg(1,0) 0 7 contended() -1 8 lock() 0 9 spin(C) 0 10 unlock() 1 11 cmpxchg(1,0) 0 12 unlock() 1 At this point, the lock is unlocked, but Task B is in an uninterruptible sleep with nobody to wake it up. This patch fixes the problem by ensuring we put the lock into the contended state if we fail to acquire it on the fastpath, ensuring that any blocked waiters are woken up when the mutex is released. Signed-off-by: Will Deacon Cc: Arnd Bergmann Cc: Chris Mason Cc: Ingo Molnar Cc: Reviewed-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org Signed-off-by: Thomas Gleixner --- include/asm-generic/mutex-xchg.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h index 580a6d35c700..c04e0db8a2d6 100644 --- a/include/asm-generic/mutex-xchg.h +++ b/include/asm-generic/mutex-xchg.h @@ -26,7 +26,13 @@ static inline void __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) - fail_fn(count); + /* + * We failed to acquire the lock, so mark it contended + * to ensure that any waiting tasks are woken up by the + * unlock slow path. + */ + if (likely(atomic_xchg(count, -1) != 1)) + fail_fn(count); } /** @@ -43,7 +49,8 @@ static inline int __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) - return fail_fn(count); + if (likely(atomic_xchg(count, -1) != 1)) + return fail_fn(count); return 0; } From cffa59baa5f1cf3e3e9e172697db48912471531c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 2 Aug 2012 12:55:27 +0200 Subject: [PATCH 0497/1098] perf, x86: Fix uncore_types_exit section mismatch Fix the following section mismatch: WARNING: arch/x86/kernel/cpu/built-in.o(.text+0x7ad9): Section mismatch in reference from the function uncore_types_exit() to the function .init.text:uncore_type_exit() The function uncore_types_exit() references the function __init uncore_type_exit(). This is often because uncore_types_exit lacks a __init annotation or the annotation of uncore_type_exit is wrong. caused by 14371cce03c2 ("perf: Add generic PCI uncore PMU device support"). Cc: Zheng Yan Cc: Ingo Molnar Signed-off-by: Borislav Petkov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1339741902-8449-8-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda9f033..a7ccd68aa13a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -2373,7 +2373,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) From ebb6cc03596cc89c89670473282ea46573feb34f Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:21 +0800 Subject: [PATCH 0498/1098] perf/x86: Fixes for Nehalem-EX uncore driver This patch includes following fixes and update: - Only some events in the Sbox and Mbox can use the match/mask registers, add code to check this. - The format definitions for xbr_mm_cfg and xbr_match registers in the Rbox are wrong, xbr_mm_cfg should use 32 bits, xbr_match should use 64 bits. - Cleanup the Rbox code. Compute the addresses extra registers in the enable_event function instead of the hw_config function. This simplifies the code in nhmex_rbox_alter_er(). Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-2-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 195 ++++++++---------- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 1 + 2 files changed, 87 insertions(+), 109 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index a7ccd68aa13a..84434e2a676f 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -796,7 +796,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -1032,24 +1031,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1056,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1071,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1264,7 +1260,8 @@ again: } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1275,8 @@ again: if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1340,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1350,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1358,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1368,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1418,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1456,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1513,7 +1511,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1520,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1657,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1667,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1697,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1732,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2279,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index c9e5dc56630a..8384e9b543b7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 From cb37af77124e8532e6ae3f9ca332593ba423b5f8 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:22 +0800 Subject: [PATCH 0499/1098] perf/x86: Add Intel Westmere-EX uncore support The Westmere-EX uncore is similar to the Nehalem-EX uncore. The differences are: - Westmere-EX uncore has 10 instances of Cbox. The MSRs for Cbox8 and Cbox9 in the Westmere-EX aren't contiguous with Cbox 0~7. - The fvid field in the ZDP_CTL_FVC register in the Mbox is different. It's 5 bits in the Nehalem-EX, 6 bits in the Westmere-EX. Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-3-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 56 ++++++++++++++++--- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 45 +++++++-------- 2 files changed, 68 insertions(+), 33 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 84434e2a676f..0a5571080e74 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -901,16 +901,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1138,6 +1143,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1167,18 +1175,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1212,7 +1231,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1222,6 +1244,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1480,6 +1506,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -2791,7 +2823,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index 8384e9b543b7..5b81c1856aac 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -276,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -369,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -486,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -516,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -524,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline From 26a4f3c08de49c1437a7b7f97693cf22d8c31656 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 9 Aug 2012 11:52:34 +0300 Subject: [PATCH 0500/1098] perf/x86: disable PEBS on a guest entry. If PMU counter has PEBS enabled it is not enough to disable counter on a guest entry since PEBS memory write can overshoot guest entry and corrupt guest memory. Disabling PEBS during guest entry solves the problem. Tested-by: David Ahern Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120809085234.GI3341@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 382366977d4c..7f2739e03e79 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } From cee25168e9c4ef7f9417632af2dc78b8521dfda7 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 13 Aug 2012 17:33:02 +0300 Subject: [PATCH 0501/1098] drm/i915: ensure i2c adapter is all set before adding it i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index d79500bc1ce5..b9755f6378d8 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -486,9 +486,6 @@ int intel_setup_gmbus(struct drm_device *dev) bus->dev_priv = dev_priv; bus->adapter.algo = &gmbus_algorithm; - ret = i2c_add_adapter(&bus->adapter); - if (ret) - goto err; /* By default use a conservative clock rate */ bus->reg0 = port | GMBUS_RATE_100KHZ; @@ -498,6 +495,10 @@ int intel_setup_gmbus(struct drm_device *dev) bus->force_bit = true; intel_gpio_setup(bus, port); + + ret = i2c_add_adapter(&bus->adapter); + if (ret) + goto err; } intel_i2c_reset(dev_priv->dev); From e18287d301bf56dd820137026d51ab38cf6c2e83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 5 Aug 2012 15:04:42 +0000 Subject: [PATCH 0502/1098] ARM: mv78xx0: fix win_cfg_base prototype Patch b6d1c33a31 "ARM: Orion: Consolidate the address map setup" tried to merge the address map for the four orion platforms, but apparently got it wrong for mv78xx0. Admittedly I don't understand what this code actually does, but it's clear that the current version is wrong. Without this patch, building mv78xx0_defconfig results in: arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Andrew Lunn Cc: Michael Walle Cc: Nicolas Pitre --- arch/arm/mach-mv78xx0/addr-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710efd..a9bc84180d21 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. From e1352fde5682ab1bdd2a9e5d75c22d1fe210ef77 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 10 Aug 2012 11:00:24 +0200 Subject: [PATCH 0503/1098] ath9k: fix decrypt_error initialization in ath_rx_tasklet() ath_rx_tasklet() calls ath9k_rx_skb_preprocess() and ath9k_rx_skb_postprocess() in a loop over the received frames. The decrypt_error flag is initialized to false just outside ath_rx_tasklet() loop. ath9k_rx_accept(), called by ath9k_rx_skb_preprocess(), only sets decrypt_error to true and never to false. Then ath_rx_tasklet() calls ath9k_rx_skb_postprocess() and passes decrypt_error to it. So, after a decryption error, in ath9k_rx_skb_postprocess(), we can have a leftover value from another processed frame. In that case, the frame will not be marked with RX_FLAG_DECRYPTED even if it is decrypted correctly. When using CCMP encryption this issue can lead to connection stuck because of CCMP PN corruption and a waste of CPU time since mac80211 tries to decrypt an already deciphered frame with ieee80211_aes_ccm_decrypt. Fix the issue initializing decrypt_error flag at the begging of the ath_rx_tasklet() loop. Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 12aca02228c2..4480c0cc655f 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1044,7 +1044,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) struct ieee80211_hw *hw = sc->hw; struct ieee80211_hdr *hdr; int retval; - bool decrypt_error = false; struct ath_rx_status rs; enum ath9k_rx_qtype qtype; bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); @@ -1066,6 +1065,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) tsf_lower = tsf & 0xffffffff; do { + bool decrypt_error = false; /* If handling rx interrupt and flush is in progress => exit */ if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) break; From 7dd6753f6d2e7e0ccbf2263cef3a9fff6bc89988 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 12 Aug 2012 21:18:33 -0400 Subject: [PATCH 0504/1098] ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in mesh Lockdep found an inconsistent lock state when joining a mesh with ath5k. The problem is that ath5k takes the lock for its beacon state, ah->block, with spin_lock_irqsave(), while mesh internally takes the sync_offset_lock with spin_lock_bh() in mesh_sync_offset_adjust_tbtt(), which in turn is called under ah->block. This could deadlock if the beacon tasklet was run on the processor that held the beacon lock during the do_softirq() in spin_unlock_bh(). We probably shouldn't hold the lock around the callbacks, but the easiest fix is to switch to spin_lock_bh for ah->block: it doesn't need interrupts disabled anyway as the data in question is only accessed in softirq or process context. Fixes the following lockdep warning: [ 446.892304] WARNING: at kernel/softirq.c:159 _local_bh_enable_ip+0x38/0xa6() [ 446.892306] Hardware name: MacBook1,1 [ 446.892309] Modules linked in: tcp_lp fuse sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 ip6table_filter nf_defrag_ipv4 xt_state nf_conntrack ip6_tables ext2 arc4 btusb bluetooth snd_hda_codec_idt snd_hda_intel carl9170 snd_hda_codec coretemp joydev ath5k snd_hwdep snd_seq isight_firmware ath snd_seq_device snd_pcm applesmc appletouch mac80211 input_polldev snd_timer microcode cfg80211 snd lpc_ich pcspkr i2c_i801 mfd_core soundcore rfkill snd_page_alloc sky2 tpm_infineon virtio_net kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit i2c_core video [ 446.892385] Pid: 1892, comm: iw Not tainted 3.6.0-rc1-wl+ #296 [ 446.892387] Call Trace: [ 446.892394] [] warn_slowpath_common+0x7c/0x91 [ 446.892398] [] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892403] [] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892459] [] ? mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892464] [] warn_slowpath_null+0x22/0x24 [ 446.892468] [] _local_bh_enable_ip+0x38/0xa6 [ 446.892473] [] local_bh_enable_ip+0xd/0xf [ 446.892479] [] _raw_spin_unlock_bh+0x34/0x37 [ 446.892527] [] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892569] [] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 446.892575] [] ? trace_hardirqs_on_caller+0x10e/0x13f [ 446.892591] [] ath5k_beacon_update+0x40/0x26b [ath5k] [ 446.892597] [] ? lock_acquired+0x1f5/0x21e [ 446.892612] [] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892617] [] ? _raw_spin_lock_irqsave+0x78/0x82 [ 446.892632] [] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892647] [] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 446.892651] [] ? lock_is_held+0x73/0x7b [ 446.892662] [] ? __might_sleep+0xa7/0x17a [ 446.892698] [] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 446.892703] [] ? queue_work+0x24/0x32 [ 446.892718] [] ? ath5k_configure_filter+0x163/0x163 [ath5k] [ 446.892766] [] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 446.892806] [] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 446.892834] [] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 446.892855] [] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 446.892875] [] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 446.892908] [] ? nl80211_set_wiphy+0x4cf/0x4cf [cfg80211] [ 446.892919] [] genl_rcv_msg+0x1d5/0x1f3 [ 446.892940] [] ? genl_rcv+0x25/0x25 [ 446.892946] [] netlink_rcv_skb+0x37/0x78 [ 446.892950] [] genl_rcv+0x1e/0x25 [ 446.892955] [] netlink_unicast+0xc3/0x12d [ 446.892959] [] netlink_sendmsg+0x1e9/0x213 [ 446.892966] [] sock_sendmsg+0x79/0x96 [ 446.892972] [] ? might_fault+0x9d/0xa3 [ 446.892978] [] ? copy_from_user+0x8/0xa [ 446.892983] [] ? verify_iovec+0x43/0x77 [ 446.892987] [] __sys_sendmsg+0x180/0x215 [ 446.892993] [] ? sched_clock_cpu+0x134/0x144 [ 446.892997] [] ? trace_hardirqs_off+0xb/0xd [ 446.893002] [] ? __lock_acquire+0x46b/0xb6e [ 446.893006] [] ? trace_hardirqs_off+0xb/0xd [ 446.893010] [] ? local_clock+0x32/0x49 [ 446.893015] [] ? lock_release_holdtime.part.9+0x4b/0x51 [ 446.893020] [] ? lock_is_held+0x73/0x7b [ 446.893025] [] ? fcheck_files+0x97/0xcd [ 446.893029] [] ? fget_light+0x2d/0x81 [ 446.893034] [] sys_sendmsg+0x3b/0x52 [ 446.893038] [] sys_socketcall+0x238/0x2a2 [ 446.893044] [] sysenter_do_call+0x12/0x38 [ 446.893047] ---[ end trace a9af5998f929270f ]--- [ 447.627222] [ 447.627232] ================================= [ 447.627237] [ INFO: inconsistent lock state ] [ 447.627244] 3.6.0-rc1-wl+ #296 Tainted: G W [ 447.627248] --------------------------------- [ 447.627253] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 447.627260] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 447.627264] (&(&ah->block)->rlock){+.?...}, at: [] ath5k_tasklet_beacon+0x91/0xa7 [ath5k] [ 447.627299] {SOFTIRQ-ON-W} state was registered at: [ 447.627304] [] mark_held_locks+0x59/0x77 [ 447.627316] [] trace_hardirqs_on_caller+0x10e/0x13f [ 447.627324] [] trace_hardirqs_on+0xb/0xd [ 447.627332] [] _local_bh_enable_ip+0x9e/0xa6 [ 447.627342] [] local_bh_enable_ip+0xd/0xf [ 447.627349] [] _raw_spin_unlock_bh+0x34/0x37 [ 447.627359] [] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 447.627451] [] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 447.627526] [] ath5k_beacon_update+0x40/0x26b [ath5k] [ 447.627547] [] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 447.627569] [] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 447.627628] [] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 447.627712] [] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 447.627782] [] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 447.627816] [] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 447.627845] [] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 447.627872] [] genl_rcv_msg+0x1d5/0x1f3 [ 447.627881] [] netlink_rcv_skb+0x37/0x78 [ 447.627891] [] genl_rcv+0x1e/0x25 [ 447.627898] [] netlink_unicast+0xc3/0x12d [ 447.627907] [] netlink_sendmsg+0x1e9/0x213 [ 447.627915] [] sock_sendmsg+0x79/0x96 [ 447.627926] [] __sys_sendmsg+0x180/0x215 [ 447.627934] [] sys_sendmsg+0x3b/0x52 [ 447.627941] [] sys_socketcall+0x238/0x2a2 [ 447.627949] [] sysenter_do_call+0x12/0x38 [ 447.627959] irq event stamp: 1929200 [ 447.627963] hardirqs last enabled at (1929200): [] tasklet_hi_action+0x3e/0xbf [ 447.627972] hardirqs last disabled at (1929199): [] tasklet_hi_action+0x15/0xbf [ 447.627981] softirqs last enabled at (1929196): [] _local_bh_enable+0x12/0x14 [ 447.627989] softirqs last disabled at (1929197): [] do_softirq+0x63/0xb8 [ 447.627999] [ 447.627999] other info that might help us debug this: [ 447.628004] Possible unsafe locking scenario: [ 447.628004] [ 447.628009] CPU0 [ 447.628012] ---- [ 447.628016] lock(&(&ah->block)->rlock); [ 447.628023] [ 447.628027] lock(&(&ah->block)->rlock); [ 447.628034] [ 447.628034] *** DEADLOCK *** Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 6 ++---- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 5 ++--- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 8c4c040a47b8..2aab20ee9f38 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2056,9 +2056,7 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) void ath5k_beacon_config(struct ath5k_hw *ah) { - unsigned long flags; - - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ah->bmisscount = 0; ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2085,7 +2083,7 @@ ath5k_beacon_config(struct ath5k_hw *ah) ath5k_hw_set_imr(ah, ah->imask); mmiowb(); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } static void ath5k_tasklet_beacon(unsigned long data) diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 260e7dc7f751..d56453e43d7e 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -254,7 +254,6 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ath5k_vif *avf = (void *)vif->drv_priv; struct ath5k_hw *ah = hw->priv; struct ath_common *common = ath5k_hw_common(ah); - unsigned long flags; mutex_lock(&ah->lock); @@ -300,9 +299,9 @@ ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } if (changes & BSS_CHANGED_BEACON) { - spin_lock_irqsave(&ah->block, flags); + spin_lock_bh(&ah->block); ath5k_beacon_update(hw, vif); - spin_unlock_irqrestore(&ah->block, flags); + spin_unlock_bh(&ah->block); } if (changes & BSS_CHANGED_BEACON_ENABLED) From 12022a785328fdf61a3e1a4bc34db0098dabe839 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Aug 2012 16:28:36 +0100 Subject: [PATCH 0505/1098] ASoC: jack: Always notify full jack status Don't just notify for the bits we've updated, notify the full state of the jack otherwise users might get confused by misleading reports. Signed-off-by: Mark Brown --- sound/soc/soc-jack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 7f8b3b7428bb..0c172938b82a 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -103,7 +103,7 @@ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) } /* Report before the DAPM sync to help users updating micbias status */ - blocking_notifier_call_chain(&jack->notifier, status, jack); + blocking_notifier_call_chain(&jack->notifier, jack->status, jack); snd_soc_dapm_sync(dapm); From 418edaaba96e58112b15c82b4907084e2a9caf42 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Fri, 3 Aug 2012 23:59:41 +0000 Subject: [PATCH 0506/1098] RDMA/ucma.c: Fix for events with wrong context on iWARP It is possible for asynchronous RDMA_CM_EVENT_ESTABLISHED events to be generated with ctx->uid == 0, because ucma_set_event_context() copies ctx->uid to the event structure outside of ctx->file->mut. This leads to a crash in the userspace library, since it gets a bogus event. Fix this by taking the mutex a bit earlier in ucma_event_handler. Signed-off-by: Tatyana Nikolova Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 6bf850422895..055ed59838dc 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -267,6 +267,7 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, if (!uevent) return event->event == RDMA_CM_EVENT_CONNECT_REQUEST; + mutex_lock(&ctx->file->mut); uevent->cm_id = cm_id; ucma_set_event_context(ctx, event, uevent); uevent->resp.event = event->event; @@ -277,7 +278,6 @@ static int ucma_event_handler(struct rdma_cm_id *cm_id, ucma_copy_conn_event(&uevent->resp.param.conn, &event->param.conn); - mutex_lock(&ctx->file->mut); if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) { if (!ctx->backlog) { ret = -ENOMEM; From af5e7d84b0ec45b2b614b0d6e3657cbdceaa21f9 Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Thu, 26 Jul 2012 20:53:19 +0200 Subject: [PATCH 0507/1098] drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate Signed-off-by: Christoph Bumiller Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- drivers/gpu/drm/nouveau/nvd0_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index d0d60e1e7f95..dac525b2994e 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -790,7 +790,7 @@ nvd0_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); int ch = EVO_CURS(nv_crtc->index); - evo_piow(crtc->dev, ch, 0x0084, (y << 16) | x); + evo_piow(crtc->dev, ch, 0x0084, (y << 16) | (x & 0xffff)); evo_piow(crtc->dev, ch, 0x0080, 0x00000000); return 0; } From 3d7a1da2c2bddb916450b1a124a9bcd9c507bdce Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 27 Jul 2012 14:18:03 +1000 Subject: [PATCH 0508/1098] drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c index 77e564667b5c..240cf962c999 100644 --- a/drivers/gpu/drm/nouveau/nouveau_i2c.c +++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c @@ -229,7 +229,7 @@ nouveau_i2c_init(struct drm_device *dev) } break; case 6: /* NV50- DP AUX */ - port->drive = entry[0]; + port->drive = entry[0] & 0x0f; port->sense = port->drive; port->adapter.algo = &nouveau_dp_i2c_algo; break; From 44b9f44e111c1e4a50bff66a642cc7c5cb59af4e Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Mon, 30 Jul 2012 12:03:30 +0200 Subject: [PATCH 0509/1098] nouveau: fixup scanout enable in nvc0_pm Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvc0_pm.c b/drivers/gpu/drm/nouveau/nvc0_pm.c index 7c95c44e2887..4e712b10ebdb 100644 --- a/drivers/gpu/drm/nouveau/nvc0_pm.c +++ b/drivers/gpu/drm/nouveau/nvc0_pm.c @@ -557,7 +557,7 @@ prog_mem(struct drm_device *dev, struct nvc0_pm_state *info) nouveau_mem_exec(&exec, info->perflvl); if (dev_priv->chipset < 0xd0) - nv_wr32(dev, 0x611200, 0x00003300); + nv_wr32(dev, 0x611200, 0x00003330); else nv_wr32(dev, 0x62c000, 0x03030300); } From fe0aac129c247be62fd8ad697ff510523fd71f74 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 4 Aug 2012 08:00:45 +0200 Subject: [PATCH 0510/1098] drm/nouveau: disable copy engine on NVAF The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 1cdfd6e757ce..1866dbb49979 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -731,7 +731,6 @@ nouveau_card_init(struct drm_device *dev) case 0xa3: case 0xa5: case 0xa8: - case 0xaf: nva3_copy_create(dev); break; } From 2064db725cc6d4ea19a24c138bc37939b63e3ae6 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 14 Aug 2012 02:22:07 +0300 Subject: [PATCH 0511/1098] drm/nv86/fifo: suspend fix This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv84_fifo.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv84_fifo.c b/drivers/gpu/drm/nouveau/nv84_fifo.c index cc82d799fc3b..c564c5e4c30a 100644 --- a/drivers/gpu/drm/nouveau/nv84_fifo.c +++ b/drivers/gpu/drm/nouveau/nv84_fifo.c @@ -117,17 +117,22 @@ nv84_fifo_context_del(struct nouveau_channel *chan, int engine) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; unsigned long flags; + u32 save; /* remove channel from playlist, will context switch if active */ spin_lock_irqsave(&dev_priv->context_switch_lock, flags); nv_mask(dev, 0x002600 + (chan->id * 4), 0x80000000, 0x00000000); nv50_fifo_playlist_update(dev); + save = nv_mask(dev, 0x002520, 0x0000003f, 0x15); + /* tell any engines on this channel to unload their contexts */ nv_wr32(dev, 0x0032fc, chan->ramin->vinst >> 12); if (!nv_wait_ne(dev, 0x0032fc, 0xffffffff, 0xffffffff)) NV_INFO(dev, "PFIFO: channel %d unload timeout\n", chan->id); + nv_wr32(dev, 0x002520, save); + nv_wr32(dev, 0x002600 + (chan->id * 4), 0x00000000); spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags); @@ -184,10 +189,13 @@ nv84_fifo_fini(struct drm_device *dev, int engine, bool suspend) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv84_fifo_priv *priv = nv_engine(dev, engine); int i; + u32 save; /* set playlist length to zero, fifo will unload context */ nv_wr32(dev, 0x0032ec, 0); + save = nv_mask(dev, 0x002520, 0x0000003f, 0x15); + /* tell all connected engines to unload their contexts */ for (i = 0; i < priv->base.channels; i++) { struct nouveau_channel *chan = dev_priv->channels.ptr[i]; @@ -199,6 +207,7 @@ nv84_fifo_fini(struct drm_device *dev, int engine, bool suspend) } } + nv_wr32(dev, 0x002520, save); nv_wr32(dev, 0x002140, 0); return 0; } From f43e04ec46b67071d432fc3f368dc9891a3443e5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 13 Aug 2012 14:36:10 +0000 Subject: [PATCH 0512/1098] GPIO: gpio-pxa: fix building without CONFIG_OF Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/gpio/gpio-pxa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 793767b0962a..9cac88a65f78 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -512,6 +512,7 @@ static int pxa_gpio_nums(void) return count; } +#ifdef CONFIG_OF static struct of_device_id pxa_gpio_dt_ids[] = { { .compatible = "mrvl,pxa-gpio" }, { .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO }, @@ -532,7 +533,6 @@ const struct irq_domain_ops pxa_irq_domain_ops = { .xlate = irq_domain_xlate_twocell, }; -#ifdef CONFIG_OF static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev) { int ret, nr_banks, nr_gpios, irq_base; @@ -679,7 +679,7 @@ static struct platform_driver pxa_gpio_driver = { .probe = pxa_gpio_probe, .driver = { .name = "pxa-gpio", - .of_match_table = pxa_gpio_dt_ids, + .of_match_table = of_match_ptr(pxa_gpio_dt_ids), }, }; From 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 12 Aug 2012 22:17:14 +0200 Subject: [PATCH 0513/1098] drm/i915: reorder edp disabling to fix ivb MacBook Air eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer Tested-by: Daniel Wagner Tested-by: Keith Packard Cc: stable@vger.kernel.org Cc: Keith Packard Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 0a56b9ab0f58..a6c426afaa7a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1174,10 +1174,14 @@ static void ironlake_edp_panel_off(struct intel_dp *intel_dp) WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); pp = ironlake_get_pp_control(dev_priv); - pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE); + /* We need to switch off panel power _and_ force vdd, for otherwise some + * panels get very unhappy and cease to work. */ + pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE); I915_WRITE(PCH_PP_CONTROL, pp); POSTING_READ(PCH_PP_CONTROL); + intel_dp->want_panel_vdd = false; + ironlake_wait_panel_off(intel_dp); } @@ -1287,11 +1291,9 @@ static void intel_dp_prepare(struct drm_encoder *encoder) * ensure that we have vdd while we switch off the panel. */ ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_backlight_off(intel_dp); - ironlake_edp_panel_off(intel_dp); - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + ironlake_edp_panel_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); } static void intel_dp_commit(struct drm_encoder *encoder) @@ -1326,11 +1328,9 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) /* Switching the panel off requires vdd. */ ironlake_edp_panel_vdd_on(intel_dp); ironlake_edp_backlight_off(intel_dp); - ironlake_edp_panel_off(intel_dp); - intel_dp_sink_dpms(intel_dp, mode); + ironlake_edp_panel_off(intel_dp); intel_dp_link_down(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, false); if (is_cpu_edp(intel_dp)) ironlake_edp_pll_off(encoder); From 7d54a904285b6e780291b91a518267bec5591913 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 10 Aug 2012 10:18:10 +0100 Subject: [PATCH 0514/1098] drm/i915: Apply post-sync write for pipe control invalidates When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky Signed-off-by: Chris Wilson [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 41 ++++++++++++++----------- 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 414af1e2973b..e2a73b38abe9 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -227,31 +227,36 @@ gen6_render_ring_flush(struct intel_ring_buffer *ring, * number of bits based on the write domains has little performance * impact. */ - flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; - flags |= PIPE_CONTROL_TLB_INVALIDATE; - flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; - flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; - flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; - /* - * Ensure that any following seqno writes only happen when the render - * cache is indeed flushed (but only if the caller actually wants that). - */ - if (flush_domains) + if (flush_domains) { + flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; + flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; + /* + * Ensure that any following seqno writes only happen + * when the render cache is indeed flushed. + */ flags |= PIPE_CONTROL_CS_STALL; + } + if (invalidate_domains) { + flags |= PIPE_CONTROL_TLB_INVALIDATE; + flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; + /* + * TLB invalidate requires a post-sync write. + */ + flags |= PIPE_CONTROL_QW_WRITE; + } - ret = intel_ring_begin(ring, 6); + ret = intel_ring_begin(ring, 4); if (ret) return ret; - intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5)); + intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4)); intel_ring_emit(ring, flags); intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); - intel_ring_emit(ring, 0); /* lower dword */ - intel_ring_emit(ring, 0); /* uppwer dword */ - intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, 0); intel_ring_advance(ring); return 0; From 265d931a9e9a7e290faa5e2145f4b2ebf38ea84c Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 13 Aug 2012 17:10:46 +0200 Subject: [PATCH 0515/1098] ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switch Some Conexant devices (e g CX20590) have no mute capability on their Beep widgets. This patch makes sure we don't try setting mutes on those widgets. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index d26ae65b43b7..0849aac449f2 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -231,15 +231,22 @@ void snd_hda_detach_beep_device(struct hda_codec *codec) } EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device); +static bool ctl_has_mute(struct snd_kcontrol *kcontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + return query_amp_caps(codec, get_amp_nid(kcontrol), + get_amp_direction(kcontrol)) & AC_AMPCAP_MUTE; +} + /* get/put callbacks for beep mute mixer switches */ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; - if (beep && !beep->enabled) { + if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) { ucontrol->value.integer.value[0] = - ucontrol->value.integer.value[1] = 0; + ucontrol->value.integer.value[1] = beep->enabled; return 0; } return snd_hda_mixer_amp_switch_get(kcontrol, ucontrol); @@ -263,6 +270,8 @@ int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol, enable |= *valp; snd_hda_enable_beep_device(codec, enable); } + if (!ctl_has_mute(kcontrol)) + return 0; return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); } EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep); From 68e035c950dbceaf660144bf74054dfdfb6aad15 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 14 Aug 2012 12:47:37 +0200 Subject: [PATCH 0516/1098] netfilter: ctnetlink: fix missing locking while changing conntrack from nfqueue Since 9cb017665 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink, we can modify the conntrack entry via nfnl_queue. However, the change of the conntrack entry via nfnetlink_queue requires appropriate locking to avoid concurrent updates. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 14f67a2cbcb5..da4fc37a8578 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1896,10 +1896,15 @@ static int ctnetlink_nfqueue_parse(const struct nlattr *attr, struct nf_conn *ct) { struct nlattr *cda[CTA_MAX+1]; + int ret; nla_parse_nested(cda, CTA_MAX, attr, ct_nla_policy); - return ctnetlink_nfqueue_parse_ct((const struct nlattr **)cda, ct); + spin_lock_bh(&nf_conntrack_lock); + ret = ctnetlink_nfqueue_parse_ct((const struct nlattr **)cda, ct); + spin_unlock_bh(&nf_conntrack_lock); + + return ret; } static struct nfq_ct_hook ctnetlink_nfqueue_hook = { From 3bdcff70b6cd049e6f4437b955850f5db83653cc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Aug 2012 17:42:11 +0200 Subject: [PATCH 0517/1098] ALSA: lx6464es: Add a missing error check Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541 Signed-off-by: Takashi Iwai --- sound/pci/lx6464es/lx6464es.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c index d1ab43706735..5579b08bb35b 100644 --- a/sound/pci/lx6464es/lx6464es.c +++ b/sound/pci/lx6464es/lx6464es.c @@ -851,6 +851,8 @@ static int __devinit lx_pcm_create(struct lx6464es *chip) /* hardcoded device name & channel count */ err = snd_pcm_new(chip->card, (char *)card_name, 0, 1, 1, &pcm); + if (err < 0) + return err; pcm->private_data = chip; From f1c6300183dbf5b9da25988e13f6f25a9e27151b Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 8 Aug 2012 12:16:52 -0700 Subject: [PATCH 0518/1098] x86, apic: fix broken legacy interrupts in the logical apic mode Recent commit 332afa656e76458ee9cf0f0d123016a0658539e4 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: Robert Richter Reported-and-tested-by: Borislav Petkov Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/io_apic.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a6c64aaddf9a..c265593ec2cd 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; From f026cfa82f628db24b8cea41b9d6202af104cecb Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 14 Aug 2012 09:53:38 -0700 Subject: [PATCH 0519/1098] Revert "x86-64/efi: Use EFI to deal with platform wall clock" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit bacef661acdb634170a8faddbc1cf28e8f8b9eee. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: H. Peter Anvin Reported-and-bisected-by: Jérôme Carretero Cc: Jan Beulich Cc: Matt Fleming Cc: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu --- arch/x86/mm/pageattr.c | 10 ++++------ arch/x86/platform/efi/efi.c | 30 ++++++++++++++++++++++++++---- include/linux/efi.h | 2 ++ init/main.c | 8 ++++---- 4 files changed, 36 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a96160..a718e0d23503 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f51e75a..92660edaa1e7 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/include/linux/efi.h b/include/linux/efi.h index 103adc6d7e3a..ec45ccd8708a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -503,6 +503,8 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); +extern unsigned long efi_get_time(void); +extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; diff --git a/init/main.c b/init/main.c index e60679de61c3..b28673087ac0 100644 --- a/init/main.c +++ b/init/main.c @@ -461,10 +461,6 @@ static void __init mm_init(void) percpu_init_late(); pgtable_cache_init(); vmalloc_init(); -#ifdef CONFIG_X86 - if (efi_enabled) - efi_enter_virtual_mode(); -#endif } asmlinkage void __init start_kernel(void) @@ -606,6 +602,10 @@ asmlinkage void __init start_kernel(void) calibrate_delay(); pidmap_init(); anon_vma_init(); +#ifdef CONFIG_X86 + if (efi_enabled) + efi_enter_virtual_mode(); +#endif thread_info_cache_init(); cred_init(); fork_init(totalram_pages); From 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:37 +0000 Subject: [PATCH 0520/1098] netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet Cc: "David S. Miller" Reported-by: Dan Carpenter Signed-off-by: Eric Dumazet Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 6 +++--- drivers/net/team/team.c | 16 +++++++++------- include/linux/netdevice.h | 3 ++- include/linux/netpoll.h | 2 +- net/8021q/vlan_dev.c | 7 ++++--- net/bridge/br_device.c | 12 ++++++------ net/bridge/br_if.c | 2 +- net/bridge/br_private.h | 4 ++-- net/core/netpoll.c | 8 ++++---- 9 files changed, 32 insertions(+), 28 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6fae5f3ec7f6..8697136e27c0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1235,12 +1235,12 @@ static inline int slave_enable_netpoll(struct slave *slave) struct netpoll *np; int err = 0; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), GFP_ATOMIC); err = -ENOMEM; if (!np) goto out; - err = __netpoll_setup(np, slave->dev); + err = __netpoll_setup(np, slave->dev, GFP_ATOMIC); if (err) { kfree(np); goto out; @@ -1292,7 +1292,7 @@ static void bond_netpoll_cleanup(struct net_device *bond_dev) read_unlock(&bond->lock); } -static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) +static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp) { struct bonding *bond = netdev_priv(dev); struct slave *slave; diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 87707ab39430..341b65dbbcd3 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -795,16 +795,17 @@ static void team_port_leave(struct team *team, struct team_port *port) } #ifdef CONFIG_NET_POLL_CONTROLLER -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { struct netpoll *np; int err; - np = kzalloc(sizeof(*np), GFP_KERNEL); + np = kzalloc(sizeof(*np), gfp); if (!np) return -ENOMEM; - err = __netpoll_setup(np, port->dev); + err = __netpoll_setup(np, port->dev, gfp); if (err) { kfree(np); return err; @@ -833,7 +834,8 @@ static struct netpoll_info *team_netpoll_info(struct team *team) } #else -static int team_port_enable_netpoll(struct team *team, struct team_port *port) +static int team_port_enable_netpoll(struct team *team, struct team_port *port, + gfp_t gfp) { return 0; } @@ -913,7 +915,7 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } if (team_netpoll_info(team)) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, GFP_KERNEL); if (err) { netdev_err(dev, "Failed to enable netpoll on device %s\n", portname); @@ -1443,7 +1445,7 @@ static void team_netpoll_cleanup(struct net_device *dev) } static int team_netpoll_setup(struct net_device *dev, - struct netpoll_info *npifo) + struct netpoll_info *npifo, gfp_t gfp) { struct team *team = netdev_priv(dev); struct team_port *port; @@ -1451,7 +1453,7 @@ static int team_netpoll_setup(struct net_device *dev, mutex_lock(&team->lock); list_for_each_entry(port, &team->port_list, list) { - err = team_port_enable_netpoll(team, port); + err = team_port_enable_netpoll(team, port, gfp); if (err) { __team_netpoll_cleanup(team); break; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a9db4f33407f..3560d688161e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -953,7 +953,8 @@ struct net_device_ops { #ifdef CONFIG_NET_POLL_CONTROLLER void (*ndo_poll_controller)(struct net_device *dev); int (*ndo_netpoll_setup)(struct net_device *dev, - struct netpoll_info *info); + struct netpoll_info *info, + gfp_t gfp); void (*ndo_netpoll_cleanup)(struct net_device *dev); #endif int (*ndo_set_vf_mac)(struct net_device *dev, diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 28f5389c924b..bf2d51eec0f3 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -43,7 +43,7 @@ struct netpoll_info { void netpoll_send_udp(struct netpoll *np, const char *msg, int len); void netpoll_print_options(struct netpoll *np); int netpoll_parse_options(struct netpoll *np, char *opt); -int __netpoll_setup(struct netpoll *np, struct net_device *ndev); +int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp); int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 73a2a83ee2da..ee4ae0944cef 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -669,19 +669,20 @@ static void vlan_dev_poll_controller(struct net_device *dev) return; } -static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo) +static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo, + gfp_t gfp) { struct vlan_dev_priv *info = vlan_dev_priv(dev); struct net_device *real_dev = info->real_dev; struct netpoll *netpoll; int err = 0; - netpoll = kzalloc(sizeof(*netpoll), GFP_KERNEL); + netpoll = kzalloc(sizeof(*netpoll), gfp); err = -ENOMEM; if (!netpoll) goto out; - err = __netpoll_setup(netpoll, real_dev); + err = __netpoll_setup(netpoll, real_dev, gfp); if (err) { kfree(netpoll); goto out; diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 333484537600..ed0e0f9dc788 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -213,7 +213,8 @@ static void br_netpoll_cleanup(struct net_device *dev) } } -static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) +static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, + gfp_t gfp) { struct net_bridge *br = netdev_priv(dev); struct net_bridge_port *p, *n; @@ -222,8 +223,7 @@ static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) list_for_each_entry_safe(p, n, &br->port_list, list) { if (!p->dev) continue; - - err = br_netpoll_enable(p); + err = br_netpoll_enable(p, gfp); if (err) goto fail; } @@ -236,17 +236,17 @@ fail: goto out; } -int br_netpoll_enable(struct net_bridge_port *p) +int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp) { struct netpoll *np; int err = 0; - np = kzalloc(sizeof(*p->np), GFP_KERNEL); + np = kzalloc(sizeof(*p->np), gfp); err = -ENOMEM; if (!np) goto out; - err = __netpoll_setup(np, p->dev); + err = __netpoll_setup(np, p->dev, gfp); if (err) { kfree(np); goto out; diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index e1144e1617be..171fd6b9bfe6 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -361,7 +361,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) if (err) goto err2; - if (br_netpoll_info(br) && ((err = br_netpoll_enable(p)))) + if (br_netpoll_info(br) && ((err = br_netpoll_enable(p, GFP_KERNEL)))) goto err3; err = netdev_set_master(dev, br->dev); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index a768b2408edf..f507d2af9646 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -316,7 +316,7 @@ static inline void br_netpoll_send_skb(const struct net_bridge_port *p, netpoll_send_skb(np, skb); } -extern int br_netpoll_enable(struct net_bridge_port *p); +extern int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp); extern void br_netpoll_disable(struct net_bridge_port *p); #else static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br) @@ -329,7 +329,7 @@ static inline void br_netpoll_send_skb(const struct net_bridge_port *p, { } -static inline int br_netpoll_enable(struct net_bridge_port *p) +static inline int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp) { return 0; } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index b4c90e42b443..37cc854774a4 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -715,7 +715,7 @@ int netpoll_parse_options(struct netpoll *np, char *opt) } EXPORT_SYMBOL(netpoll_parse_options); -int __netpoll_setup(struct netpoll *np, struct net_device *ndev) +int __netpoll_setup(struct netpoll *np, struct net_device *ndev, gfp_t gfp) { struct netpoll_info *npinfo; const struct net_device_ops *ops; @@ -734,7 +734,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev) } if (!ndev->npinfo) { - npinfo = kmalloc(sizeof(*npinfo), GFP_KERNEL); + npinfo = kmalloc(sizeof(*npinfo), gfp); if (!npinfo) { err = -ENOMEM; goto out; @@ -752,7 +752,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev) ops = np->dev->netdev_ops; if (ops->ndo_netpoll_setup) { - err = ops->ndo_netpoll_setup(ndev, npinfo); + err = ops->ndo_netpoll_setup(ndev, npinfo, gfp); if (err) goto free_npinfo; } @@ -857,7 +857,7 @@ int netpoll_setup(struct netpoll *np) refill_skbs(); rtnl_lock(); - err = __netpoll_setup(np, ndev); + err = __netpoll_setup(np, ndev, GFP_KERNEL); rtnl_unlock(); if (err) From 38e6bc185d9544dfad1774b3f8902a0b061aea25 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:38 +0000 Subject: [PATCH 0521/1098] netpoll: make __netpoll_cleanup non-block Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 +-- include/linux/netpoll.h | 3 +++ net/8021q/vlan_dev.c | 6 +---- net/bridge/br_device.c | 6 +---- net/core/netpoll.c | 44 ++++++++++++++++++++++++--------- 5 files changed, 39 insertions(+), 24 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 8697136e27c0..e42891683e3b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1257,9 +1257,7 @@ static inline void slave_disable_netpoll(struct slave *slave) return; slave->np = NULL; - synchronize_rcu_bh(); - __netpoll_cleanup(np); - kfree(np); + __netpoll_free_rcu(np); } static inline bool slave_dev_support_netpoll(struct net_device *slave_dev) { diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index bf2d51eec0f3..907812efb4d9 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -23,6 +23,7 @@ struct netpoll { u8 remote_mac[ETH_ALEN]; struct list_head rx; /* rx_np list element */ + struct rcu_head rcu; }; struct netpoll_info { @@ -38,6 +39,7 @@ struct netpoll_info { struct delayed_work tx_work; struct netpoll *netpoll; + struct rcu_head rcu; }; void netpoll_send_udp(struct netpoll *np, const char *msg, int len); @@ -48,6 +50,7 @@ int netpoll_setup(struct netpoll *np); int netpoll_trap(void); void netpoll_set_trap(int trap); void __netpoll_cleanup(struct netpoll *np); +void __netpoll_free_rcu(struct netpoll *np); void netpoll_cleanup(struct netpoll *np); int __netpoll_rx(struct sk_buff *skb); void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index ee4ae0944cef..b65623f90660 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -704,11 +704,7 @@ static void vlan_dev_netpoll_cleanup(struct net_device *dev) info->netpoll = NULL; - /* Wait for transmitting packets to finish before freeing. */ - synchronize_rcu_bh(); - - __netpoll_cleanup(netpoll); - kfree(netpoll); + __netpoll_free_rcu(netpoll); } #endif /* CONFIG_NET_POLL_CONTROLLER */ diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index ed0e0f9dc788..f41ba4048c9a 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -267,11 +267,7 @@ void br_netpoll_disable(struct net_bridge_port *p) p->np = NULL; - /* Wait for transmitting packets to finish before freeing. */ - synchronize_rcu_bh(); - - __netpoll_cleanup(np); - kfree(np); + __netpoll_free_rcu(np); } #endif diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 37cc854774a4..dc17f1db1479 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -878,6 +878,24 @@ static int __init netpoll_init(void) } core_initcall(netpoll_init); +static void rcu_cleanup_netpoll_info(struct rcu_head *rcu_head) +{ + struct netpoll_info *npinfo = + container_of(rcu_head, struct netpoll_info, rcu); + + skb_queue_purge(&npinfo->arp_tx); + skb_queue_purge(&npinfo->txq); + + /* we can't call cancel_delayed_work_sync here, as we are in softirq */ + cancel_delayed_work(&npinfo->tx_work); + + /* clean after last, unfinished work */ + __skb_queue_purge(&npinfo->txq); + /* now cancel it again */ + cancel_delayed_work(&npinfo->tx_work); + kfree(npinfo); +} + void __netpoll_cleanup(struct netpoll *np) { struct netpoll_info *npinfo; @@ -903,21 +921,25 @@ void __netpoll_cleanup(struct netpoll *np) ops->ndo_netpoll_cleanup(np->dev); RCU_INIT_POINTER(np->dev->npinfo, NULL); - - /* avoid racing with NAPI reading npinfo */ - synchronize_rcu_bh(); - - skb_queue_purge(&npinfo->arp_tx); - skb_queue_purge(&npinfo->txq); - cancel_delayed_work_sync(&npinfo->tx_work); - - /* clean after last, unfinished work */ - __skb_queue_purge(&npinfo->txq); - kfree(npinfo); + call_rcu_bh(&npinfo->rcu, rcu_cleanup_netpoll_info); } } EXPORT_SYMBOL_GPL(__netpoll_cleanup); +static void rcu_cleanup_netpoll(struct rcu_head *rcu_head) +{ + struct netpoll *np = container_of(rcu_head, struct netpoll, rcu); + + __netpoll_cleanup(np); + kfree(np); +} + +void __netpoll_free_rcu(struct netpoll *np) +{ + call_rcu_bh(&np->rcu, rcu_cleanup_netpoll); +} +EXPORT_SYMBOL_GPL(__netpoll_free_rcu); + void netpoll_cleanup(struct netpoll *np) { if (!np->dev) From 3335f0ca130c201f8680e97f63612053fbc16e22 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:39 +0000 Subject: [PATCH 0522/1098] netconsole: do not release spin_lock when calling __netpoll_cleanup With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index f9347ea3d381..f0ad56c13933 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -640,12 +640,7 @@ static int netconsole_netdev_event(struct notifier_block *this, * rtnl_lock already held */ if (nt->np.dev) { - spin_unlock_irqrestore( - &target_list_lock, - flags); __netpoll_cleanup(&nt->np); - spin_lock_irqsave(&target_list_lock, - flags); dev_put(nt->np.dev); nt->np.dev = NULL; netconsole_target_put(nt); From 57c5d46191e75312934c00eba65b13a31ca95120 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:40 +0000 Subject: [PATCH 0523/1098] netpoll: take rcu_read_lock_bh() in netpoll_rx() In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 4 ++-- net/core/netpoll.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 907812efb4d9..5d881c388273 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -52,7 +52,7 @@ void netpoll_set_trap(int trap); void __netpoll_cleanup(struct netpoll *np); void __netpoll_free_rcu(struct netpoll *np); void netpoll_cleanup(struct netpoll *np); -int __netpoll_rx(struct sk_buff *skb); +int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo); void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev); static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) @@ -77,7 +77,7 @@ static inline bool netpoll_rx(struct sk_buff *skb) spin_lock(&npinfo->rx_lock); /* check rx_flags again with the lock held */ - if (npinfo->rx_flags && __netpoll_rx(skb)) + if (npinfo->rx_flags && __netpoll_rx(skb, npinfo)) ret = true; spin_unlock(&npinfo->rx_lock); diff --git a/net/core/netpoll.c b/net/core/netpoll.c index dc17f1db1479..d055bb01328b 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -543,13 +543,12 @@ static void arp_reply(struct sk_buff *skb) spin_unlock_irqrestore(&npinfo->rx_lock, flags); } -int __netpoll_rx(struct sk_buff *skb) +int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) { int proto, len, ulen; int hits = 0; const struct iphdr *iph; struct udphdr *uh; - struct netpoll_info *npinfo = skb->dev->npinfo; struct netpoll *np, *tmp; if (list_empty(&npinfo->rx_np)) From 91fe4a4b9e490a24f6702dd8afe72d8afab6fcdb Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:41 +0000 Subject: [PATCH 0524/1098] netpoll: use netpoll_rx_on() in netpoll_rx() The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 5d881c388273..2d178baa49df 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -63,6 +63,13 @@ static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) #ifdef CONFIG_NETPOLL +static inline int netpoll_rx_on(struct sk_buff *skb) +{ + struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); + + return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags); +} + static inline bool netpoll_rx(struct sk_buff *skb) { struct netpoll_info *npinfo; @@ -70,11 +77,11 @@ static inline bool netpoll_rx(struct sk_buff *skb) bool ret = false; local_irq_save(flags); - npinfo = rcu_dereference_bh(skb->dev->npinfo); - if (!npinfo || (list_empty(&npinfo->rx_np) && !npinfo->rx_flags)) + if (!netpoll_rx_on(skb)) goto out; + npinfo = rcu_dereference_bh(skb->dev->npinfo); spin_lock(&npinfo->rx_lock); /* check rx_flags again with the lock held */ if (npinfo->rx_flags && __netpoll_rx(skb, npinfo)) @@ -86,13 +93,6 @@ out: return ret; } -static inline int netpoll_rx_on(struct sk_buff *skb) -{ - struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); - - return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags); -} - static inline int netpoll_receive_skb(struct sk_buff *skb) { if (!list_empty(&skb->dev->napi_list)) From 2899656b494dcd118123af1126826b115c8ea6f9 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:42 +0000 Subject: [PATCH 0525/1098] netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev() This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 3 +++ net/core/netpoll.c | 31 +++++++++++++++++-------------- 2 files changed, 20 insertions(+), 14 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 2d178baa49df..61aee86cf21d 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -57,7 +57,10 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev); static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) { + unsigned long flags; + local_irq_save(flags); netpoll_send_skb_on_dev(np, skb, np->dev); + local_irq_restore(flags); } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index d055bb01328b..174346ac15a0 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -54,7 +54,7 @@ static atomic_t trapped; MAX_UDP_CHUNK) static void zap_completion_queue(void); -static void arp_reply(struct sk_buff *skb); +static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo); static unsigned int carrier_timeout = 4; module_param(carrier_timeout, uint, 0644); @@ -170,7 +170,8 @@ static void poll_napi(struct net_device *dev) list_for_each_entry(napi, &dev->napi_list, dev_list) { if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - budget = poll_one_napi(dev->npinfo, napi, budget); + budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), + napi, budget); spin_unlock(&napi->poll_lock); if (!budget) @@ -185,13 +186,14 @@ static void service_arp_queue(struct netpoll_info *npi) struct sk_buff *skb; while ((skb = skb_dequeue(&npi->arp_tx))) - arp_reply(skb); + netpoll_arp_reply(skb, npi); } } static void netpoll_poll_dev(struct net_device *dev) { const struct net_device_ops *ops; + struct netpoll_info *ni = rcu_dereference_bh(dev->npinfo); if (!dev || !netif_running(dev)) return; @@ -206,17 +208,18 @@ static void netpoll_poll_dev(struct net_device *dev) poll_napi(dev); if (dev->flags & IFF_SLAVE) { - if (dev->npinfo) { + if (ni) { struct net_device *bond_dev = dev->master; struct sk_buff *skb; - while ((skb = skb_dequeue(&dev->npinfo->arp_tx))) { + struct netpoll_info *bond_ni = rcu_dereference_bh(bond_dev->npinfo); + while ((skb = skb_dequeue(&ni->arp_tx))) { skb->dev = bond_dev; - skb_queue_tail(&bond_dev->npinfo->arp_tx, skb); + skb_queue_tail(&bond_ni->arp_tx, skb); } } } - service_arp_queue(dev->npinfo); + service_arp_queue(ni); zap_completion_queue(); } @@ -302,6 +305,7 @@ static int netpoll_owner_active(struct net_device *dev) return 0; } +/* call with IRQ disabled */ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, struct net_device *dev) { @@ -309,8 +313,11 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, unsigned long tries; const struct net_device_ops *ops = dev->netdev_ops; /* It is up to the caller to keep npinfo alive. */ - struct netpoll_info *npinfo = np->dev->npinfo; + struct netpoll_info *npinfo; + WARN_ON_ONCE(!irqs_disabled()); + + npinfo = rcu_dereference_bh(np->dev->npinfo); if (!npinfo || !netif_running(dev) || !netif_device_present(dev)) { __kfree_skb(skb); return; @@ -319,11 +326,9 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, /* don't get messages out of order, and no recursion */ if (skb_queue_len(&npinfo->txq) == 0 && !netpoll_owner_active(dev)) { struct netdev_queue *txq; - unsigned long flags; txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb)); - local_irq_save(flags); /* try until next clock tick */ for (tries = jiffies_to_usecs(1)/USEC_PER_POLL; tries > 0; --tries) { @@ -347,10 +352,9 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, } WARN_ONCE(!irqs_disabled(), - "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n", + "netpoll_send_skb_on_dev(): %s enabled interrupts in poll (%pF)\n", dev->name, ops->ndo_start_xmit); - local_irq_restore(flags); } if (status != NETDEV_TX_OK) { @@ -423,9 +427,8 @@ void netpoll_send_udp(struct netpoll *np, const char *msg, int len) } EXPORT_SYMBOL(netpoll_send_udp); -static void arp_reply(struct sk_buff *skb) +static void netpoll_arp_reply(struct sk_buff *skb, struct netpoll_info *npinfo) { - struct netpoll_info *npinfo = skb->dev->npinfo; struct arphdr *arp; unsigned char *arp_ptr; int size, type = ARPOP_REPLY, ptype = ETH_P_ARP; From d30362c0712eb567334b3b66de7c40d4372f2c6f Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:43 +0000 Subject: [PATCH 0526/1098] bridge: add some comments for NETDEV_RELEASE Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/bridge/br_if.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 171fd6b9bfe6..1c8fdc3558cd 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -427,6 +427,10 @@ int br_del_if(struct net_bridge *br, struct net_device *dev) if (!p || p->br != br) return -EINVAL; + /* Since more than one interface can be attached to a bridge, + * there still maybe an alternate path for netconsole to use; + * therefore there is no reason for a NETDEV_RELEASE event. + */ del_nbp(p); spin_lock_bh(&br->lock); From 4e3828c4bfd90b00a951cad7c8da27d1966beefe Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:44 +0000 Subject: [PATCH 0527/1098] bridge: use list_for_each_entry() in netpoll functions We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/bridge/br_device.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index f41ba4048c9a..32211fa5b506 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -206,21 +206,20 @@ static void br_poll_controller(struct net_device *br_dev) static void br_netpoll_cleanup(struct net_device *dev) { struct net_bridge *br = netdev_priv(dev); - struct net_bridge_port *p, *n; + struct net_bridge_port *p; - list_for_each_entry_safe(p, n, &br->port_list, list) { + list_for_each_entry(p, &br->port_list, list) br_netpoll_disable(p); - } } static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp) { struct net_bridge *br = netdev_priv(dev); - struct net_bridge_port *p, *n; + struct net_bridge_port *p; int err = 0; - list_for_each_entry_safe(p, n, &br->port_list, list) { + list_for_each_entry(p, &br->port_list, list) { if (!p->dev) continue; err = br_netpoll_enable(p, gfp); From e15c3c2294605f09f9b336b2f3b97086ab4b8145 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:45 +0000 Subject: [PATCH 0528/1098] netpoll: check netpoll tx status on the right device Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller Signed-off-by: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- include/linux/if_team.h | 30 +++++++++++++++--------------- net/bridge/br_forward.c | 2 +- 3 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index e42891683e3b..d688a8af432c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -398,7 +398,7 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping; - if (unlikely(netpoll_tx_running(slave_dev))) + if (unlikely(netpoll_tx_running(bond->dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); else dev_queue_xmit(skb); diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 6960fc1841a7..aa2e167e1ef4 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -96,21 +96,6 @@ static inline void team_netpoll_send_skb(struct team_port *port, } #endif -static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, - struct sk_buff *skb) -{ - BUILD_BUG_ON(sizeof(skb->queue_mapping) != - sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); - skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); - - skb->dev = port->dev; - if (unlikely(netpoll_tx_running(port->dev))) { - team_netpoll_send_skb(port, skb); - return 0; - } - return dev_queue_xmit(skb); -} - struct team_mode_ops { int (*init)(struct team *team); void (*exit)(struct team *team); @@ -200,6 +185,21 @@ struct team { long mode_priv[TEAM_MODE_PRIV_LONGS]; }; +static inline int team_dev_queue_xmit(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + BUILD_BUG_ON(sizeof(skb->queue_mapping) != + sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); + skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); + + skb->dev = port->dev; + if (unlikely(netpoll_tx_running(team->dev))) { + team_netpoll_send_skb(port, skb); + return 0; + } + return dev_queue_xmit(skb); +} + static inline struct hlist_head *team_port_index_hash(struct team *team, int port_index) { diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index e9466d412707..02015a505d2a 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -65,7 +65,7 @@ static void __br_deliver(const struct net_bridge_port *to, struct sk_buff *skb) { skb->dev = to->dev; - if (unlikely(netpoll_tx_running(to->dev))) { + if (unlikely(netpoll_tx_running(to->br->dev))) { if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb)) kfree_skb(skb); else { From 77ab8a54d9a8dcc4a46484a04133314f33f2aba6 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:46 +0000 Subject: [PATCH 0529/1098] netpoll: convert several functions to bool These functions are just boolean, let them return bool instead of int. Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- include/linux/netpoll.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 61aee86cf21d..66d5379c305e 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -66,7 +66,7 @@ static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) #ifdef CONFIG_NETPOLL -static inline int netpoll_rx_on(struct sk_buff *skb) +static inline bool netpoll_rx_on(struct sk_buff *skb) { struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo); @@ -125,7 +125,7 @@ static inline void netpoll_poll_unlock(void *have) } } -static inline int netpoll_tx_running(struct net_device *dev) +static inline bool netpoll_tx_running(struct net_device *dev) { return irqs_disabled(); } @@ -133,11 +133,11 @@ static inline int netpoll_tx_running(struct net_device *dev) #else static inline bool netpoll_rx(struct sk_buff *skb) { - return 0; + return false; } -static inline int netpoll_rx_on(struct sk_buff *skb) +static inline bool netpoll_rx_on(struct sk_buff *skb) { - return 0; + return false; } static inline int netpoll_receive_skb(struct sk_buff *skb) { @@ -153,9 +153,9 @@ static inline void netpoll_poll_unlock(void *have) static inline void netpoll_netdev_init(struct net_device *dev) { } -static inline int netpoll_tx_running(struct net_device *dev) +static inline bool netpoll_tx_running(struct net_device *dev) { - return 0; + return false; } #endif From f3da38932b46d1bf171634cc7aae3da405eaf7a6 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:47 +0000 Subject: [PATCH 0530/1098] vlan: clean up some variable names To be consistent, s/info/vlan/. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b65623f90660..0347d48aa7c9 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -672,8 +672,8 @@ static void vlan_dev_poll_controller(struct net_device *dev) static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *npinfo, gfp_t gfp) { - struct vlan_dev_priv *info = vlan_dev_priv(dev); - struct net_device *real_dev = info->real_dev; + struct vlan_dev_priv *vlan = vlan_dev_priv(dev); + struct net_device *real_dev = vlan->real_dev; struct netpoll *netpoll; int err = 0; @@ -688,7 +688,7 @@ static int vlan_dev_netpoll_setup(struct net_device *dev, struct netpoll_info *n goto out; } - info->netpoll = netpoll; + vlan->netpoll = netpoll; out: return err; @@ -696,13 +696,13 @@ out: static void vlan_dev_netpoll_cleanup(struct net_device *dev) { - struct vlan_dev_priv *info = vlan_dev_priv(dev); - struct netpoll *netpoll = info->netpoll; + struct vlan_dev_priv *vlan= vlan_dev_priv(dev); + struct netpoll *netpoll = vlan->netpoll; if (!netpoll) return; - info->netpoll = NULL; + vlan->netpoll = NULL; __netpoll_free_rcu(netpoll); } From 6eacf8ad8d01c49b95b994b0bf379db2b5b29460 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:48 +0000 Subject: [PATCH 0531/1098] vlan: clean up vlan_dev_hard_start_xmit() Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/8021q/vlan_dev.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 0347d48aa7c9..402442402af7 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -137,9 +137,21 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev, return rc; } +static inline netdev_tx_t vlan_netpoll_send_skb(struct vlan_dev_priv *vlan, struct sk_buff *skb) +{ +#ifdef CONFIG_NET_POLL_CONTROLLER + if (vlan->netpoll) + netpoll_send_skb(vlan->netpoll, skb); +#else + BUG(); +#endif + return NETDEV_TX_OK; +} + static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct vlan_dev_priv *vlan = vlan_dev_priv(dev); struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data); unsigned int len; int ret; @@ -150,29 +162,30 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs... */ if (veth->h_vlan_proto != htons(ETH_P_8021Q) || - vlan_dev_priv(dev)->flags & VLAN_FLAG_REORDER_HDR) { + vlan->flags & VLAN_FLAG_REORDER_HDR) { u16 vlan_tci; - vlan_tci = vlan_dev_priv(dev)->vlan_id; + vlan_tci = vlan->vlan_id; vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb); skb = __vlan_hwaccel_put_tag(skb, vlan_tci); } - skb->dev = vlan_dev_priv(dev)->real_dev; + skb->dev = vlan->real_dev; len = skb->len; - if (netpoll_tx_running(dev)) - return skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev); + if (unlikely(netpoll_tx_running(dev))) + return vlan_netpoll_send_skb(vlan, skb); + ret = dev_queue_xmit(skb); if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) { struct vlan_pcpu_stats *stats; - stats = this_cpu_ptr(vlan_dev_priv(dev)->vlan_pcpu_stats); + stats = this_cpu_ptr(vlan->vlan_pcpu_stats); u64_stats_update_begin(&stats->syncp); stats->tx_packets++; stats->tx_bytes += len; u64_stats_update_end(&stats->syncp); } else { - this_cpu_inc(vlan_dev_priv(dev)->vlan_pcpu_stats->tx_dropped); + this_cpu_inc(vlan->vlan_pcpu_stats->tx_dropped); } return ret; From 689971b44613883ee74ae9c1b31a864aaa3a8e17 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:49 +0000 Subject: [PATCH 0532/1098] netpoll: handle vlan tags in netpoll tx and rx path Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise Cc: Patrick McHardy Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/core/netpoll.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 174346ac15a0..e4ba3e70c174 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -334,6 +335,14 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, tries > 0; --tries) { if (__netif_tx_trylock(txq)) { if (!netif_xmit_stopped(txq)) { + if (vlan_tx_tag_present(skb) && + !(netif_skb_features(skb) & NETIF_F_HW_VLAN_TX)) { + skb = __vlan_put_tag(skb, vlan_tx_tag_get(skb)); + if (unlikely(!skb)) + break; + skb->vlan_tci = 0; + } + status = ops->ndo_start_xmit(skb, dev); if (status == NETDEV_TX_OK) txq_trans_update(txq); @@ -567,6 +576,12 @@ int __netpoll_rx(struct sk_buff *skb, struct netpoll_info *npinfo) return 1; } + if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) { + skb = vlan_untag(skb); + if (unlikely(!skb)) + goto out; + } + proto = ntohs(eth_hdr(skb)->h_proto); if (proto != ETH_P_IP) goto out; From 6bdb7fe31046ac50b47e83c35cd6c6b6160a475d Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 10 Aug 2012 01:24:50 +0000 Subject: [PATCH 0533/1098] netpoll: re-enable irq in poll_napi() napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/core/netpoll.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index e4ba3e70c174..346b1eb83a1f 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -168,16 +168,24 @@ static void poll_napi(struct net_device *dev) struct napi_struct *napi; int budget = 16; + WARN_ON_ONCE(!irqs_disabled()); + list_for_each_entry(napi, &dev->napi_list, dev_list) { + local_irq_enable(); if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { + rcu_read_lock_bh(); budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), napi, budget); + rcu_read_unlock_bh(); spin_unlock(&napi->poll_lock); - if (!budget) + if (!budget) { + local_irq_disable(); break; + } } + local_irq_disable(); } } From 6556bfde65b1d4bea29eb2e1566398676792eaaa Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Fri, 10 Aug 2012 01:24:51 +0000 Subject: [PATCH 0534/1098] netconsole.txt: revision of examples for the receiver of kernel messages There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by: Dirk Gouders Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/networking/netconsole.txt | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 8d022073e3ef..2e9e0ae2cd45 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p ', -'nc -l -u ' or syslogd. +The remote host has several options to receive the kernel messages, +for example: + +1) syslogd + +2) netcat + + On distributions using a BSD-based netcat version (e.g. Fedora, + openSUSE and Ubuntu) the listening port must be specified without + the -p switch: + + 'nc -u -l -p ' / 'nc -u -l ' or + 'netcat -u -l -p ' / 'netcat -u -l ' + +3) socat + + 'socat udp-recv: -' Dynamic reconfiguration: ======================== From 03304bcb5ec4421c0d272d7f8d688804d82b1efd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 12 Aug 2012 09:16:30 +0000 Subject: [PATCH 0535/1098] net: qmi_wwan: use fixed interface number matching MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 215 +++++-------------------------------- 1 file changed, 28 insertions(+), 187 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2ea126a16d79..c6a587366a57 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -247,30 +247,12 @@ err: */ static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf) { - int rv; struct qmi_wwan_state *info = (void *)&dev->data; - /* ZTE makes devices where the interface descriptors and endpoint - * configurations of two or more interfaces are identical, even - * though the functions are completely different. If set, then - * driver_info->data is a bitmap of acceptable interface numbers - * allowing us to bind to one such interface without binding to - * all of them - */ - if (dev->driver_info->data && - !test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) { - dev_info(&intf->dev, "not on our whitelist - ignored"); - rv = -ENODEV; - goto err; - } - /* control and data is shared */ info->control = intf; info->data = intf; - rv = qmi_wwan_register_subdriver(dev); - -err: - return rv; + return qmi_wwan_register_subdriver(dev); } static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) @@ -356,86 +338,23 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_force_int0 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(0), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int1 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(1), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int2 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(2), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int3 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(3), /* interface whitelist bitmap */ -}; - -static const struct driver_info qmi_wwan_force_int4 = { - .description = "Qualcomm WWAN/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(4), /* interface whitelist bitmap */ -}; - -/* Sierra Wireless provide equally useless interface descriptors - * Devices in QMI mode can be switched between two different - * configurations: - * a) USB interface #8 is QMI/wwan - * b) USB interfaces #8, #19 and #20 are QMI/wwan - * - * Both configurations provide a number of other interfaces (serial++), - * some of which have the same endpoint configuration as we expect, so - * a whitelist or blacklist is necessary. - * - * FIXME: The below whitelist should include BIT(20). It does not - * because I cannot get it to work... - */ -static const struct driver_info qmi_wwan_sierra = { - .description = "Sierra Wireless wwan/QMI device", - .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_shared, - .unbind = qmi_wwan_unbind, - .manage_power = qmi_wwan_manage_power, - .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ -}; - #define HUAWEI_VENDOR_ID 0x12D1 +/* map QMI/wwan function by a fixed interface number */ +#define QMI_FIXED_INTF(vend, prod, num) \ + USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ + .driver_info = (unsigned long)&qmi_wwan_shared + /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ #define QMI_GOBI1K_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int3 + QMI_FIXED_INTF(vend, prod, 3) -/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ +/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ - USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_force_int0 + QMI_FIXED_INTF(vend, prod, 0) static const struct usb_device_id products[] = { + /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = HUAWEI_VENDOR_ID, @@ -452,10 +371,9 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */ .driver_info = (unsigned long)&qmi_wwan_info, }, - { /* Huawei E392, E398 and possibly others in "Windows mode" - * using a combined control and data interface without any CDC - * functional descriptors - */ + + /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E392, E398 and possibly others in "Windows mode" */ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = HUAWEI_VENDOR_ID, .bInterfaceClass = USB_CLASS_VENDOR_SPEC, @@ -472,98 +390,21 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* ZTE MF820D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0167, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF821D */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0326, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3520-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0055, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int1, - }, - { /* ZTE (Vodafone) K3565-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0063, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3570-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1008, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3571-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1010, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K3765-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x2002, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE (Vodafone) K4505-Z */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x0104, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int4, - }, - { /* ZTE MF60 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x19d2, - .idProduct = 0x1402, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_force_int2, - }, - { /* Sierra Wireless MC77xx in QMI mode */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x1199, - .idProduct = 0x68a2, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - .driver_info = (unsigned long)&qmi_wwan_sierra, - }, - /* Gobi 1000 devices */ + /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ + {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ + {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ + {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + + /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ @@ -579,7 +420,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ - /* Gobi 2000 and 3000 devices */ + /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ From 9b469a60d68b13c288d5c3fc23de29d9d482dbe6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 12 Aug 2012 09:16:31 +0000 Subject: [PATCH 0536/1098] net: qmi_wwan: add Sierra Wireless devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index c6a587366a57..24524b24329b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -401,8 +401,11 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ + {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ + {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ + {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ @@ -430,6 +433,8 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ @@ -441,11 +446,14 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {QMI_FIXED_INTF(0x1199, 0x9011, 5)}, /* alternate interface number!? */ {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + { } /* END */ }; MODULE_DEVICE_TABLE(usb, products); From 5ea429638fbd9f18e6837e3e83a1f517741ec43b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 12 Aug 2012 09:16:32 +0000 Subject: [PATCH 0537/1098] net: qmi_wwan: compress device_id list using macros MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 24524b24329b..aaa061b7355d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -356,38 +356,21 @@ static const struct driver_info qmi_wwan_shared = { static const struct usb_device_id products[] = { /* 1. CDC ECM like devices match on the control interface */ { /* Huawei E392, E398 and possibly others sharing both device id and more... */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 9, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), .driver_info = (unsigned long)&qmi_wwan_info, }, { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), .driver_info = (unsigned long)&qmi_wwan_info, }, /* 2. Combined interface devices matching on class+protocol */ { /* Huawei E392, E398 and possibly others in "Windows mode" */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = HUAWEI_VENDOR_ID, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 17, + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, { /* Pantech UML290 */ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x106c, - .idProduct = 0x3718, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xf0, - .bInterfaceProtocol = 0xff, + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, From aefe5c0060639914cce7ed4947f2c030f615bebf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 12 Aug 2012 09:53:38 +0000 Subject: [PATCH 0538/1098] net: sierra_net: replace whitelist with ifnumber match MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/sierra_net.c | 52 +++++++++--------------------------- 1 file changed, 12 insertions(+), 40 deletions(-) diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index d75d1f56becf..7be49ea60b6d 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -68,15 +68,8 @@ static atomic_t iface_counter = ATOMIC_INIT(0); */ #define SIERRA_NET_USBCTL_BUF_LEN 1024 -/* list of interface numbers - used for constructing interface lists */ -struct sierra_net_iface_info { - const u32 infolen; /* number of interface numbers on list */ - const u8 *ifaceinfo; /* pointer to the array holding the numbers */ -}; - struct sierra_net_info_data { u16 rx_urb_size; - struct sierra_net_iface_info whitelist; }; /* Private data structure */ @@ -637,21 +630,6 @@ static int sierra_net_change_mtu(struct net_device *net, int new_mtu) return usbnet_change_mtu(net, new_mtu); } -static int is_whitelisted(const u8 ifnum, - const struct sierra_net_iface_info *whitelist) -{ - if (whitelist) { - const u8 *list = whitelist->ifaceinfo; - int i; - - for (i = 0; i < whitelist->infolen; i++) { - if (list[i] == ifnum) - return 1; - } - } - return 0; -} - static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) { int result = 0; @@ -706,11 +684,6 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf) dev_dbg(&dev->udev->dev, "%s", __func__); ifacenum = intf->cur_altsetting->desc.bInterfaceNumber; - /* We only accept certain interfaces */ - if (!is_whitelisted(ifacenum, &data->whitelist)) { - dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum); - return -ENODEV; - } numendpoints = intf->cur_altsetting->desc.bNumEndpoints; /* We have three endpoints, bulk in and out, and a status */ if (numendpoints != 3) { @@ -945,13 +918,8 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return NULL; } -static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 }; static const struct sierra_net_info_data sierra_net_info_data_direct_ip = { .rx_urb_size = 8 * 1024, - .whitelist = { - .infolen = ARRAY_SIZE(sierra_net_ifnum_list), - .ifaceinfo = sierra_net_ifnum_list - } }; static const struct driver_info sierra_net_info_direct_ip = { @@ -965,15 +933,19 @@ static const struct driver_info sierra_net_info_direct_ip = { .data = (unsigned long)&sierra_net_info_data_direct_ip, }; +#define DIRECT_IP_DEVICE(vend, prod) \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip}, \ + {USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \ + .driver_info = (unsigned long)&sierra_net_info_direct_ip} + static const struct usb_device_id products[] = { - {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, - {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ - .driver_info = (unsigned long) &sierra_net_info_direct_ip}, + DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */ + DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */ + DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */ {}, /* last item */ }; From 7bd86cc282a458b66c41e3f6676de6656c99b8db Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Sun, 12 Aug 2012 20:09:59 +0000 Subject: [PATCH 0539/1098] ipv4: Cache local output routes Commit caacf05e5ad1abf causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by: Alex Shi Signed-off-by: Yan, Zheng Signed-off-by: David S. Miller --- net/ipv4/route.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index e4ba974f143c..fd9ecb52c66b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2028,7 +2028,6 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *fl4) } dev_out = net->loopback_dev; fl4->flowi4_oif = dev_out->ifindex; - res.fi = NULL; flags |= RTCF_LOCAL; goto make_route; } From 4855d6f3116e891b66198838b683dce3dcf6e874 Mon Sep 17 00:00:00 2001 From: Igor Maravic Date: Sun, 12 Aug 2012 22:31:58 +0000 Subject: [PATCH 0540/1098] net: ipv6: proc: Fix error handling Fix error handling in case making of dir dev_snmp6 failes Signed-off-by: Igor Maravic Signed-off-by: David S. Miller --- net/ipv6/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index da2e92d05c15..745a32042950 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -307,10 +307,10 @@ static int __net_init ipv6_proc_init_net(struct net *net) goto proc_dev_snmp6_fail; return 0; +proc_dev_snmp6_fail: + proc_net_remove(net, "snmp6"); proc_snmp6_fail: proc_net_remove(net, "sockstat6"); -proc_dev_snmp6_fail: - proc_net_remove(net, "dev_snmp6"); return -ENOMEM; } From fa16ebed31f336e41970f3f0ea9e8279f6be2d27 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Mon, 13 Aug 2012 14:39:49 +0000 Subject: [PATCH 0541/1098] IB/ipoib: Add missing locking when CM object is deleted Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_cm_destroy_tx() a CM object is moved between lists without any supported locking. Under a stress test, this eventually leads to list corruption and a crash. Previously when this routine was called, callers were taking the device priv lock. Currently this function is called from the RCU callback associated with neighbour deletion. Fix the race by taking the same lock we used to before. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 95ecf4eadf5f..24683fda8e21 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1271,12 +1271,15 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) { struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + unsigned long flags; if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + spin_lock_irqsave(&priv->lock, flags); list_move(&tx->list, &priv->cm.reap_list); queue_work(ipoib_workqueue, &priv->cm.reap_task); ipoib_dbg(priv, "Reap connection for gid %pI6\n", tx->neigh->daddr + 4); tx->neigh = NULL; + spin_unlock_irqrestore(&priv->lock, flags); } } From 6c723a68c661008adf415ee90efe5f737e928ce0 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Mon, 13 Aug 2012 14:39:50 +0000 Subject: [PATCH 0542/1098] IB/ipoib: Fix RCU pointer dereference of wrong object Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_neigh_free() (which is called from a few errors flows in the driver), rcu_dereference() is invoked with the wrong pointer object, which results in a crash. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 97920b77a5d0..3e2085a3ee47 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1052,7 +1052,7 @@ void ipoib_neigh_free(struct ipoib_neigh *neigh) for (n = rcu_dereference_protected(*np, lockdep_is_held(&ntbl->rwlock)); n != NULL; - n = rcu_dereference_protected(neigh->hnext, + n = rcu_dereference_protected(*np, lockdep_is_held(&ntbl->rwlock))) { if (n == neigh) { /* found */ From bb2b6d19ec8b593b66402e2895c4314955b19833 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 23 Jul 2012 16:39:29 +0000 Subject: [PATCH 0543/1098] udf: fix udf_setsize() for file data in ICB If the new size is larger than the old size and the old file data was stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the new size still fits in the ICB, skip the call to udf_extend_file() as it does not handle this i_alloc_type value (it calls BUG()). Signed-off-by: Ian Abbott Signed-off-by: Jan Kara --- fs/udf/inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/udf/inode.c b/fs/udf/inode.c index fafaad795cd6..aa233469b3c1 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -1124,14 +1124,17 @@ int udf_setsize(struct inode *inode, loff_t newsize) if (err) return err; down_write(&iinfo->i_data_sem); - } else + } else { iinfo->i_lenAlloc = newsize; + goto set_size; + } } err = udf_extend_file(inode, newsize); if (err) { up_write(&iinfo->i_data_sem); return err; } +set_size: truncate_setsize(inode, newsize); up_write(&iinfo->i_data_sem); } else { From dc141a402b9dc03a4188cd978a4cf149c397172c Mon Sep 17 00:00:00 2001 From: Ashish Sangwan Date: Sat, 21 Jul 2012 16:35:17 +0530 Subject: [PATCH 0544/1098] UDF: During mount free lvid_bh before rescanning with different blocksize If s_lvid_bh is not freed and set to NULL before re-scanning partition with default block size, we might end up using wrong lvid in case s_lvid_bh is not updated in udf_load_logicalvolint during rescan. Signed-off-by: Ashish Sangwan Signed-off-by: Namjae Jeon Signed-off-by: Jan Kara --- fs/udf/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/udf/super.c b/fs/udf/super.c index dcbf98722afc..9f55f7981b7d 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -2000,6 +2000,8 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent) if (!silent) pr_notice("Rescanning with blocksize %d\n", UDF_DEFAULT_BLOCKSIZE); + brelse(sbi->s_lvid_bh); + sbi->s_lvid_bh = NULL; uopt.blocksize = UDF_DEFAULT_BLOCKSIZE; ret = udf_load_vrs(sb, &uopt, silent, &fileset); } From 6ea2eea1fa930b9308a06f77fce65c38931eeb13 Mon Sep 17 00:00:00 2001 From: Jeff Liu Date: Wed, 18 Jul 2012 12:12:41 +0800 Subject: [PATCH 0545/1098] quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space(). sb->s_dqopt->dqptr_sem is used to serialize ops using pointers from inode to dquots. But for __dquot_alloc_space(), it could be safely moved down after the default warn[] array got initialized. Signed-off-by: Jie Liu Signed-off-by: Jan Kara --- fs/quota/dquot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 36a29b753c79..c495a3055e2a 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1589,10 +1589,10 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags) goto out; } - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) warn[cnt].w_type = QUOTA_NL_NOWARN; + down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); spin_lock(&dq_data_lock); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (!dquots[cnt]) From 48d1788493f874e5d32dccb2911a7bc91c248b4b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 2 Aug 2012 21:36:04 -0400 Subject: [PATCH 0546/1098] reiserfs: fix deadlocks with quotas The BKL push-down for reiserfs made lock recursion a special case that needs to be handled explicitly. One of the cases that was unhandled is dropping the quota during inode eviction. Both reiserfs_evict_inode and reiserfs_write_dquot take the write lock, but when the journal lock is taken it only drops one the references. The locking rules are that the journal lock be acquired before the write lock so leaving the reference open leads to a ABBA deadlock. This patch pushes the unlock up before clear_inode and avoids the recursive locking. Another ABBA situation can occur when the write lock is dropped while reading the bitmap buffer while in the quota code. When the lock is reacquired, it will deadlock against dquot->dq_lock and dqopt->dqio_mutex in the dquot_acquire path. It's safe to retain the lock across the read and should be cached under write load. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/bitmap.c | 2 -- fs/reiserfs/inode.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 4c0c7d163d15..a98b7740a0fc 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -1334,9 +1334,7 @@ struct buffer_head *reiserfs_read_bitmap_block(struct super_block *sb, else if (bitmap == 0) block = (REISERFS_DISK_OFFSET_IN_BYTES >> sb->s_blocksize_bits) + 1; - reiserfs_write_unlock(sb); bh = sb_bread(sb, block); - reiserfs_write_lock(sb); if (bh == NULL) reiserfs_warning(sb, "sh-2029: %s: bitmap block (#%u) " "reading failed", __func__, block); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index a6d4268fb6c1..855da58db145 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -76,10 +76,10 @@ void reiserfs_evict_inode(struct inode *inode) ; } out: + reiserfs_write_unlock_once(inode->i_sb, depth); clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */ dquot_drop(inode); inode->i_blocks = 0; - reiserfs_write_unlock_once(inode->i_sb, depth); return; no_delete: From 6024935f5ff5f1646bce8404416318e5fd4a0c4a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:49:59 +0000 Subject: [PATCH 0547/1098] llc2: Fix silent failure of llc_station_init() llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/net/llc.h | 2 +- net/llc/llc_station.c | 19 ++----------------- 2 files changed, 3 insertions(+), 18 deletions(-) diff --git a/include/net/llc.h b/include/net/llc.h index 226c846cab08..f2d0fc570527 100644 --- a/include/net/llc.h +++ b/include/net/llc.h @@ -133,7 +133,7 @@ extern int llc_build_and_send_ui_pkt(struct llc_sap *sap, struct sk_buff *skb, extern void llc_sap_handler(struct llc_sap *sap, struct sk_buff *skb); extern void llc_conn_handler(struct llc_sap *sap, struct sk_buff *skb); -extern int llc_station_init(void); +extern void llc_station_init(void); extern void llc_station_exit(void); #ifdef CONFIG_PROC_FS diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 6828e39ec2ec..45ddbb93c5d0 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -687,12 +687,8 @@ static void llc_station_rcv(struct sk_buff *skb) llc_station_state_process(skb); } -int __init llc_station_init(void) +void __init llc_station_init(void) { - int rc = -ENOBUFS; - struct sk_buff *skb; - struct llc_station_state_ev *ev; - skb_queue_head_init(&llc_main_station.mac_pdu_q); skb_queue_head_init(&llc_main_station.ev_q.list); spin_lock_init(&llc_main_station.ev_q.lock); @@ -700,20 +696,9 @@ int __init llc_station_init(void) (unsigned long)&llc_main_station); llc_main_station.ack_timer.expires = jiffies + sysctl_llc_station_ack_timeout; - skb = alloc_skb(0, GFP_ATOMIC); - if (!skb) - goto out; - rc = 0; llc_set_station_handler(llc_station_rcv); - ev = llc_station_ev(skb); - memset(ev, 0, sizeof(*ev)); llc_main_station.maximum_retry = 1; - llc_main_station.state = LLC_STATION_STATE_DOWN; - ev->type = LLC_STATION_EV_TYPE_SIMPLE; - ev->prim_type = LLC_STATION_EV_ENABLE_WITHOUT_DUP_ADDR_CHECK; - rc = llc_station_next_state(skb); -out: - return rc; + llc_main_station.state = LLC_STATION_STATE_UP; } void __exit llc_station_exit(void) From f4f8720febf0d785a054fc09bde5e3ad09728a58 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:50:43 +0000 Subject: [PATCH 0548/1098] llc2: Call llc_station_exit() on llc2_init() failure path Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/llc/af_llc.c | 5 +++-- net/llc/llc_station.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index f6fe4d400502..8c2919ca36f6 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -1206,7 +1206,7 @@ static int __init llc2_init(void) rc = llc_proc_init(); if (rc != 0) { printk(llc_proc_err_msg); - goto out_unregister_llc_proto; + goto out_station; } rc = llc_sysctl_init(); if (rc) { @@ -1226,7 +1226,8 @@ out_sysctl: llc_sysctl_exit(); out_proc: llc_proc_exit(); -out_unregister_llc_proto: +out_station: + llc_station_exit(); proto_unregister(&llc_proto); goto out; } diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 45ddbb93c5d0..bba5184fafd7 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -701,7 +701,7 @@ void __init llc_station_init(void) llc_main_station.state = LLC_STATION_STATE_UP; } -void __exit llc_station_exit(void) +void llc_station_exit(void) { llc_set_station_handler(NULL); } From aadf31de16a7b2878af00a02e6557df84efa784b Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Aug 2012 02:50:55 +0000 Subject: [PATCH 0549/1098] llc: Fix races between llc2 handler use and (un)registration When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/llc/llc_input.c | 21 +++++++++++++++++---- net/llc/llc_station.c | 2 +- 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c index e32cab44ea95..dd3e83328ad5 100644 --- a/net/llc/llc_input.c +++ b/net/llc/llc_input.c @@ -42,6 +42,7 @@ static void (*llc_type_handlers[2])(struct llc_sap *sap, void llc_add_pack(int type, void (*handler)(struct llc_sap *sap, struct sk_buff *skb)) { + smp_wmb(); /* ensure initialisation is complete before it's called */ if (type == LLC_DEST_SAP || type == LLC_DEST_CONN) llc_type_handlers[type - 1] = handler; } @@ -50,11 +51,19 @@ void llc_remove_pack(int type) { if (type == LLC_DEST_SAP || type == LLC_DEST_CONN) llc_type_handlers[type - 1] = NULL; + synchronize_net(); } void llc_set_station_handler(void (*handler)(struct sk_buff *skb)) { + /* Ensure initialisation is complete before it's called */ + if (handler) + smp_wmb(); + llc_station_handler = handler; + + if (!handler) + synchronize_net(); } /** @@ -150,6 +159,8 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, int dest; int (*rcv)(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *); + void (*sta_handler)(struct sk_buff *skb); + void (*sap_handler)(struct llc_sap *sap, struct sk_buff *skb); if (!net_eq(dev_net(dev), &init_net)) goto drop; @@ -182,7 +193,8 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, */ rcv = rcu_dereference(sap->rcv_func); dest = llc_pdu_type(skb); - if (unlikely(!dest || !llc_type_handlers[dest - 1])) { + sap_handler = dest ? ACCESS_ONCE(llc_type_handlers[dest - 1]) : NULL; + if (unlikely(!sap_handler)) { if (rcv) rcv(skb, dev, pt, orig_dev); else @@ -193,7 +205,7 @@ int llc_rcv(struct sk_buff *skb, struct net_device *dev, if (cskb) rcv(cskb, dev, pt, orig_dev); } - llc_type_handlers[dest - 1](sap, skb); + sap_handler(sap, skb); } llc_sap_put(sap); out: @@ -202,9 +214,10 @@ drop: kfree_skb(skb); goto out; handle_station: - if (!llc_station_handler) + sta_handler = ACCESS_ONCE(llc_station_handler); + if (!sta_handler) goto drop; - llc_station_handler(skb); + sta_handler(skb); goto out; } diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index bba5184fafd7..b2f2bac2c2a2 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -696,9 +696,9 @@ void __init llc_station_init(void) (unsigned long)&llc_main_station); llc_main_station.ack_timer.expires = jiffies + sysctl_llc_station_ack_timeout; - llc_set_station_handler(llc_station_rcv); llc_main_station.maximum_retry = 1; llc_main_station.state = LLC_STATION_STATE_UP; + llc_set_station_handler(llc_station_rcv); } void llc_station_exit(void) From 80eb7a506fdcea08f86c9dfc7c638303bf02a3c8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 14 Aug 2012 11:29:17 +0100 Subject: [PATCH 0550/1098] staging: comedi: Fix reversed test in comedi_device_attach() Commit 3902a370281d2f2b130f141e8cf94eab40125769 (staging: comedi: refactor comedi_device_attach() a bit) by yours truly introduced an inverted logic bug in comedi_device_attach() for the case where the driver expects the device to be configured by driver name rather than board name. The result of a strcmp() is being tested incorrectly. Fix it. Thanks to Stephen N Chivers for discovering the bug and suggesting the fix. Cc: # 3.5.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index c0fdb00783ed..2359151af7e1 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -168,7 +168,7 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->board_ptr = comedi_recognize(driv, it->board_name); if (dev->board_ptr) break; - } else if (strcmp(driv->driver_name, it->board_name)) + } else if (strcmp(driv->driver_name, it->board_name) == 0) break; module_put(driv->module); } From 8607dcbefb9e1bcbefe2d77f74809cf31e6a04a1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 14 Aug 2012 16:53:21 -0700 Subject: [PATCH 0551/1098] staging: csr: add INET dependancy Randy noticed that with CONFIG_INET turned off, the following build errors happen: ERROR: "register_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! ERROR: "unregister_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/csr/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/csr/Kconfig b/drivers/staging/csr/Kconfig index cee8d48d2af9..ad2a1096e920 100644 --- a/drivers/staging/csr/Kconfig +++ b/drivers/staging/csr/Kconfig @@ -1,6 +1,6 @@ config CSR_WIFI tristate "CSR wireless driver" - depends on MMC && CFG80211_WEXT + depends on MMC && CFG80211_WEXT && INET select WIRELESS_EXT select WEXT_PRIV help From f37c54b6a6c56489221d42ff27305e4f8098e34b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 05:49:47 +0000 Subject: [PATCH 0552/1098] drivers/net/ethernet/ti/davinci_cpdma.c: Remove potential NULL dereference If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 3b5c4571b55e..d15c888e9df8 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -538,11 +538,12 @@ EXPORT_SYMBOL_GPL(cpdma_chan_create); int cpdma_chan_destroy(struct cpdma_chan *chan) { - struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_ctlr *ctlr; unsigned long flags; if (!chan) return -EINVAL; + ctlr = chan->ctlr; spin_lock_irqsave(&ctlr->lock, flags); if (chan->state != CPDMA_STATE_IDLE) From 137bc99ff30aa1d9bf556ee9c8ba788a8ec0f595 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 02:58:33 +0000 Subject: [PATCH 0553/1098] drivers/net/ethernet/freescale/fs_enet: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c | 4 +++- drivers/net/ethernet/freescale/fs_enet/mii-fec.c | 8 ++++++-- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c index 0f2d1a710909..151453309401 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c @@ -174,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c index 55bb867258e6..cdf702a59485 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c +++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c @@ -137,8 +137,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); fec->fecp = ioremap(res.start, resource_size(&res)); - if (!fec->fecp) + if (!fec->fecp) { + ret = -ENOMEM; goto out_fec; + } if (get_bus_freq) { clock = get_bus_freq(ofdev->dev.of_node); @@ -172,8 +174,10 @@ static int __devinit fs_enet_mdio_probe(struct platform_device *ofdev) new_bus->phy_mask = ~0; new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!new_bus->irq) + if (!new_bus->irq) { + ret = -ENOMEM; goto out_unmap_regs; + } new_bus->parent = &ofdev->dev; dev_set_drvdata(&ofdev->dev, new_bus); From 499b95f6b324ec49e8ff50000d47877445b8590a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 02:58:34 +0000 Subject: [PATCH 0554/1098] drivers/net/ethernet/mellanox/mlx4/mcg.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/mcg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 4ec3835e1bc2..a018ea2a43de 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -432,8 +432,10 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qpn) { /* Entry already exists, add to duplicates */ dqp = kmalloc(sizeof *dqp, GFP_KERNEL); - if (!dqp) + if (!dqp) { + err = -ENOMEM; goto out_mailbox; + } dqp->qpn = qpn; list_add_tail(&dqp->list, &entry->duplicates); found = true; From 4acd4945cd1e1f92b20d14e349c6c6a52acbd42d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 14 Aug 2012 08:54:51 +0000 Subject: [PATCH 0555/1098] ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [] dev_disable_lro+0x32/0x6b [ 1127.885174] [] dev_forward_change+0x30/0xcb [ 1128.013214] [] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 79181819a24f..6bc85f7c31e3 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -494,8 +494,7 @@ static void addrconf_forward_change(struct net *net, __s32 newf) struct net_device *dev; struct inet6_dev *idev; - rcu_read_lock(); - for_each_netdev_rcu(net, dev) { + for_each_netdev(net, dev) { idev = __in6_dev_get(dev); if (idev) { int changed = (!idev->cnf.forwarding) ^ (!newf); @@ -504,7 +503,6 @@ static void addrconf_forward_change(struct net *net, __s32 newf) dev_forward_change(idev); } } - rcu_read_unlock(); } static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int newf) From 2856cc2e4d0852c3ddaae9dcb19cb9396512eb08 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Aug 2012 00:37:29 -0700 Subject: [PATCH 0556/1098] sparc64: Be less verbose during vmemmap population. On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2eec9678dbda274e906cc32ea8f711da3b (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 6026fdd1b2ed..d58edf5fefdb 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2020,6 +2020,9 @@ EXPORT_SYMBOL(_PAGE_CACHE); #ifdef CONFIG_SPARSEMEM_VMEMMAP unsigned long vmemmap_table[VMEMMAP_SIZE]; +static long __meminitdata addr_start, addr_end; +static int __meminitdata node_start; + int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) { unsigned long vstart = (unsigned long) start; @@ -2050,15 +2053,30 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) *vmem_pp = pte_base | __pa(block); - printk(KERN_INFO "[%p-%p] page_structs=%lu " - "node=%d entry=%lu/%lu\n", start, block, nr, - node, - addr >> VMEMMAP_CHUNK_SHIFT, - VMEMMAP_SIZE); + /* check to see if we have contiguous blocks */ + if (addr_end != addr || node_start != node) { + if (addr_start) + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = addr; + node_start = node; + } + addr_end = addr + VMEMMAP_CHUNK; } } return 0; } + +void __meminit vmemmap_populate_print_last(void) +{ + if (addr_start) { + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = 0; + addr_end = 0; + node_start = 0; + } +} #endif /* CONFIG_SPARSEMEM_VMEMMAP */ static void prot_init_common(unsigned long page_none, From 89868730a756feca7e4b21a97c86487cd565ed22 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 13 Aug 2012 19:57:31 +0100 Subject: [PATCH 0557/1098] ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE Seems that Thomas' and my patches collided during the last merge window. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e4191ccbdb7a..6d6e18fee9fe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) From 0fe33aae0e94b4097dd433c9399e16e17d638cd8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: [PATCH 0558/1098] audit: don't free_chunk() after fsnotify_add_mark() Don't do free_chunk() after fsnotify_add_mark(). That one does a delayed unref via the destroy list and this results in use-after-free. Signed-off-by: Miklos Szeredi Acked-by: Eric Paris CC: stable@vger.kernel.org --- kernel/audit_tree.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 3a5ca582ba1e..69a58515f43f 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -259,7 +259,7 @@ static void untag_chunk(struct node *p) fsnotify_duplicate_mark(&new->mark, entry); if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) { - free_chunk(new); + fsnotify_put_mark(&new->mark); goto Fallback; } @@ -322,7 +322,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) entry = &chunk->mark; if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) { - free_chunk(chunk); + fsnotify_put_mark(entry); return -ENOSPC; } @@ -396,7 +396,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) fsnotify_duplicate_mark(chunk_entry, old_entry); if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) { spin_unlock(&old_entry->lock); - free_chunk(chunk); + fsnotify_put_mark(chunk_entry); fsnotify_put_mark(old_entry); return -ENOSPC; } From a2140fc0cb0325bb6384e788edd27b9a568714e2 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: [PATCH 0559/1098] audit: fix refcounting in audit-tree Refcounting of fsnotify_mark in audit tree is broken. E.g: refcount create_chunk alloc_chunk 1 fsnotify_add_mark 2 untag_chunk fsnotify_get_mark 3 fsnotify_destroy_mark audit_tree_freeing_mark 2 fsnotify_put_mark 1 fsnotify_put_mark 0 via destroy_list fsnotify_mark_destroy -1 This was reported by various people as triggering Oops when stopping auditd. We could just remove the put_mark from audit_tree_freeing_mark() but that would break freeing via inode destruction. So this patch simply omits a put_mark after calling destroy_mark or adds a get_mark before. The additional get_mark is necessary where there's no other put_mark after fsnotify_destroy_mark() since it assumes that the caller is holding a reference (or the inode is keeping the mark pinned, not the case here AFAICS). Signed-off-by: Miklos Szeredi Reported-by: Valentin Avram Reported-by: Peter Moody Acked-by: Eric Paris CC: stable@vger.kernel.org --- kernel/audit_tree.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 69a58515f43f..2b2ffff9eca2 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -250,7 +250,6 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); - fsnotify_put_mark(entry); goto out; } @@ -293,7 +292,6 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); - fsnotify_put_mark(entry); goto out; Fallback: @@ -332,6 +330,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&hash_lock); chunk->dead = 1; spin_unlock(&entry->lock); + fsnotify_get_mark(entry); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry); return 0; @@ -412,6 +411,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); + fsnotify_get_mark(chunk_entry); fsnotify_destroy_mark(chunk_entry); fsnotify_put_mark(chunk_entry); @@ -445,7 +445,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&old_entry->lock); fsnotify_destroy_mark(old_entry); fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */ - fsnotify_put_mark(old_entry); /* and kill it */ return 0; } From b3e8692b4dde5cf5fc60e4b95385229a72623182 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 12:55:22 +0200 Subject: [PATCH 0560/1098] audit: clean up refcounting in audit-tree Drop the initial reference by fsnotify_init_mark early instead of audit_tree_freeing_mark() at destroy time. In the cases we destroy the mark before we drop the initial reference we need to get rid of the get_mark that balances the put_mark in audit_tree_freeing_mark(). Signed-off-by: Miklos Szeredi --- kernel/audit_tree.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 2b2ffff9eca2..ed206fd88cca 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -292,6 +292,7 @@ static void untag_chunk(struct node *p) spin_unlock(&hash_lock); spin_unlock(&entry->lock); fsnotify_destroy_mark(entry); + fsnotify_put_mark(&new->mark); /* drop initial reference */ goto out; Fallback: @@ -330,7 +331,6 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&hash_lock); chunk->dead = 1; spin_unlock(&entry->lock); - fsnotify_get_mark(entry); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry); return 0; @@ -346,6 +346,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) insert_hash(chunk); spin_unlock(&hash_lock); spin_unlock(&entry->lock); + fsnotify_put_mark(entry); /* drop initial reference */ return 0; } @@ -411,7 +412,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); - fsnotify_get_mark(chunk_entry); fsnotify_destroy_mark(chunk_entry); fsnotify_put_mark(chunk_entry); @@ -444,6 +444,7 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) spin_unlock(&chunk_entry->lock); spin_unlock(&old_entry->lock); fsnotify_destroy_mark(old_entry); + fsnotify_put_mark(chunk_entry); /* drop initial reference */ fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */ return 0; } @@ -915,7 +916,12 @@ static void audit_tree_freeing_mark(struct fsnotify_mark *entry, struct fsnotify struct audit_chunk *chunk = container_of(entry, struct audit_chunk, mark); evict_chunk(chunk); - fsnotify_put_mark(entry); + + /* + * We are guaranteed to have at least one reference to the mark from + * either the inode or the caller of fsnotify_destroy_mark(). + */ + BUG_ON(atomic_read(&entry->refcnt) < 1); } static bool audit_tree_send_event(struct fsnotify_group *group, struct inode *inode, From e68726ff72cf7ba5e7d789857fcd9a75ca573f03 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: [PATCH 0561/1098] vfs: canonicalize create mode in build_open_flags() Userspace can pass weird create mode in open(2) that we canonicalize to "(mode & S_IALLUGO) | S_IFREG" in vfs_create(). The problem is that we use the uncanonicalized mode before calling vfs_create() with unforseen consequences. So do the canonicalization early in build_open_flags(). Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones CC: stable@vger.kernel.org --- fs/open.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/open.c b/fs/open.c index bc132e167d2d..e1f2cdb91a4d 100644 --- a/fs/open.c +++ b/fs/open.c @@ -852,9 +852,10 @@ static inline int build_open_flags(int flags, umode_t mode, struct open_flags *o int lookup_flags = 0; int acc_mode; - if (!(flags & O_CREAT)) - mode = 0; - op->mode = mode; + if (flags & O_CREAT) + op->mode = (mode & S_IALLUGO) | S_IFREG; + else + op->mode = 0; /* Must never be set by userspace */ flags &= ~FMODE_NONOTIFY; From 62b259d8b3ea9d4a73108fc599e40c863ec25ae6 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: [PATCH 0562/1098] vfs: atomic_open(): fix create mode usage Don't mask S_ISREG off the create mode before passing to ->atomic_open(). Other methods (->create, ->mknod) also get the complete file mode and filesystems expect it. Reported-by: Steve Reported-by: Richard W.M. Jones Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 1b464390dde8..5bac1bb6e585 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2414,7 +2414,7 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, goto out; } - mode = op->mode & S_IALLUGO; + mode = op->mode; if ((open_flag & O_CREAT) && !IS_POSIXACL(dir)) mode &= ~current_umask(); From 38227f78a5020b3100cbb0406c89807563b10dae Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: [PATCH 0563/1098] vfs: pass right create mode to may_o_create() Pass the umask-ed create mode to may_o_create() instead of the original one. Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 5bac1bb6e585..26c28ec4f4af 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2452,7 +2452,7 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, } if (open_flag & O_CREAT) { - error = may_o_create(&nd->path, dentry, op->mode); + error = may_o_create(&nd->path, dentry, mode); if (error) { create_error = error; if (open_flag & O_EXCL) From af109bca94a8a223c4632a4ff769b3419fe7ed8c Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 15 Aug 2012 13:01:24 +0200 Subject: [PATCH 0564/1098] fuse: check create mode in atomic open Verify that the VFS is passing us a complete create mode with the S_IFREG to atomic open. Reported-by: Steve Reported-by: Richard W.M. Jones Signed-off-by: Miklos Szeredi Tested-by: Richard W.M. Jones --- fs/fuse/dir.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 8964cf3999b2..324bc0850534 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -383,6 +383,9 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, struct fuse_entry_out outentry; struct fuse_file *ff; + /* Userspace expects S_IFREG in create mode */ + BUG_ON((mode & S_IFMT) != S_IFREG); + forget = fuse_alloc_forget(); err = -ENOMEM; if (!forget) From 2e84f2641ea91a730642ead558a4ee3bd52310c9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 15 Aug 2012 13:50:27 +0200 Subject: [PATCH 0565/1098] jbd: don't write superblock when unmounting an ro filesystem This sequence: results in an IO error when unmounting the RO filesystem. The bug was introduced by: commit 9754e39c7bc51328f145e933bfb0df47cd67b6e9 Author: Jan Kara Date: Sat Apr 7 12:33:03 2012 +0200 jbd: Split updating of journal superblock and marking journal empty which lost some of the magic in journal_update_superblock() which used to test for a journal with no outstanding transactions. This is a port of a jbd2 fix by Eric Sandeen. CC: # 3.4.x Signed-off-by: Jan Kara --- fs/jbd/journal.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 09357508ec9a..a2862339323b 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1113,6 +1113,11 @@ static void mark_journal_empty(journal_t *journal) BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); spin_lock(&journal->j_state_lock); + /* Is it already empty? */ + if (sb->s_start == 0) { + spin_unlock(&journal->j_state_lock); + return; + } jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", journal->j_tail_sequence); From 68766a2edcd5cd744262a70a2f67a320ac944760 Mon Sep 17 00:00:00 2001 From: Nikola Pajkovsky Date: Wed, 15 Aug 2012 00:38:08 +0200 Subject: [PATCH 0566/1098] udf: fix retun value on error path in udf_load_logicalvol In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by: Nikola Pajkovsky Signed-off-by: Jan Kara --- fs/udf/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/udf/super.c b/fs/udf/super.c index 9f55f7981b7d..18fc038a438d 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1344,6 +1344,7 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, udf_err(sb, "error loading logical volume descriptor: " "Partition table too long (%u > %lu)\n", table_len, sb->s_blocksize - sizeof(*lvd)); + ret = 1; goto out_bh; } @@ -1388,8 +1389,10 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, UDF_ID_SPARABLE, strlen(UDF_ID_SPARABLE))) { if (udf_load_sparable_map(sb, map, - (struct sparablePartitionMap *)gpm) < 0) + (struct sparablePartitionMap *)gpm) < 0) { + ret = 1; goto out_bh; + } } else if (!strncmp(upm2->partIdent.ident, UDF_ID_METADATA, strlen(UDF_ID_METADATA))) { From 4e8b14526ca7fb046a81c94002c1c43b6fdf0e9b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 8 Aug 2012 15:36:20 -0400 Subject: [PATCH 0567/1098] time: Improve sanity checking of timekeeping inputs Unexpected behavior could occur if the time is set to a value large enough to overflow a 64bit ktime_t (which is something larger then the year 2262). Also unexpected behavior could occur if large negative offsets are injected via adjtimex. So this patch improves the sanity check timekeeping inputs by improving the timespec_valid() check, and then makes better use of timespec_valid() to make sure we don't set the time to an invalid negative value or one that overflows ktime_t. Note: This does not protect from setting the time close to overflowing ktime_t and then letting natural accumulation cause the overflow. Reported-by: CAI Qian Reported-by: Sasha Levin Signed-off-by: John Stultz Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Zhouping Liu Cc: Ingo Molnar Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/ktime.h | 7 ------- include/linux/time.h | 22 ++++++++++++++++++++-- kernel/time/timekeeping.c | 26 ++++++++++++++++++++++++-- 3 files changed, 44 insertions(+), 11 deletions(-) diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 603bec2913b0..06177ba10a16 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -58,13 +58,6 @@ union ktime { typedef union ktime ktime_t; /* Kill this */ -#define KTIME_MAX ((s64)~((u64)1 << 63)) -#if (BITS_PER_LONG == 64) -# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) -#else -# define KTIME_SEC_MAX LONG_MAX -#endif - /* * ktime_t definitions when using the 64-bit scalar representation: */ diff --git a/include/linux/time.h b/include/linux/time.h index c81c5e40fcb5..b0bbd8f0130d 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -107,11 +107,29 @@ static inline struct timespec timespec_sub(struct timespec lhs, return ts_delta; } +#define KTIME_MAX ((s64)~((u64)1 << 63)) +#if (BITS_PER_LONG == 64) +# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) +#else +# define KTIME_SEC_MAX LONG_MAX +#endif + /* * Returns true if the timespec is norm, false if denorm: */ -#define timespec_valid(ts) \ - (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC)) +static inline bool timespec_valid(const struct timespec *ts) +{ + /* Dates before 1970 are bogus */ + if (ts->tv_sec < 0) + return false; + /* Can't have more nanoseconds then a second */ + if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) + return false; + /* Disallow values that could overflow ktime_t */ + if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + return false; + return true; +} extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e16af197a2bc..898bef066a44 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -427,7 +427,7 @@ int do_settimeofday(const struct timespec *tv) struct timespec ts_delta, xt; unsigned long flags; - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + if (!timespec_valid(tv)) return -EINVAL; write_seqlock_irqsave(&tk->lock, flags); @@ -463,6 +463,8 @@ int timekeeping_inject_offset(struct timespec *ts) { struct timekeeper *tk = &timekeeper; unsigned long flags; + struct timespec tmp; + int ret = 0; if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -471,10 +473,17 @@ int timekeeping_inject_offset(struct timespec *ts) timekeeping_forward_now(tk); + /* Make sure the proposed value is valid */ + tmp = timespec_add(tk_xtime(tk), *ts); + if (!timespec_valid(&tmp)) { + ret = -EINVAL; + goto error; + } tk_xtime_add(tk, ts); tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts)); +error: /* even if we error out, we forwarded the time, so call update */ timekeeping_update(tk, true); write_sequnlock_irqrestore(&tk->lock, flags); @@ -482,7 +491,7 @@ int timekeeping_inject_offset(struct timespec *ts) /* signal hrtimers about time change */ clock_was_set(); - return 0; + return ret; } EXPORT_SYMBOL(timekeeping_inject_offset); @@ -649,7 +658,20 @@ void __init timekeeping_init(void) struct timespec now, boot, tmp; read_persistent_clock(&now); + if (!timespec_valid(&now)) { + pr_warn("WARNING: Persistent clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + now.tv_sec = 0; + now.tv_nsec = 0; + } + read_boot_clock(&boot); + if (!timespec_valid(&boot)) { + pr_warn("WARNING: Boot clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + boot.tv_sec = 0; + boot.tv_nsec = 0; + } seqlock_init(&tk->lock); From 58569aee5a1a5dcc25c34a0a2ed9a377874e6b05 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 26 Jul 2012 12:15:46 +0200 Subject: [PATCH 0568/1098] ARM: Orion: Set eth packet size csum offload limit The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by: Arnaud Patard Signed-off-by: Jason Cooper Cc: --- arch/arm/mach-dove/common.c | 3 ++- arch/arm/mach-kirkwood/common.c | 4 ++-- arch/arm/mach-mv78xx0/common.c | 6 ++++-- arch/arm/mach-orion5x/common.c | 3 ++- arch/arm/plat-orion/common.c | 8 ++++++-- arch/arm/plat-orion/include/plat/common.h | 6 ++++-- include/linux/mv643xx_eth.h | 2 ++ 7 files changed, 22 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7..6321567d8eaa 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfce..3226077735b1 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9c..3057f7d4329a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0de..410291c67666 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc014..b8b747a9d360 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb213609..ae2377ef63e5 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 51bf8ada6dc0..49258e0ed1c6 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -15,6 +15,8 @@ #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 + struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; struct platform_device *shared_smi; From 03810a20308af54d01b096bc19a8c145684bd6b2 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:56 +0200 Subject: [PATCH 0569/1098] ARM: Kirkwood: Fix iconnect leds While converting, a led has been missed leading to wrong power blue led definition. Add it back and fix the gpio used on the power blue led. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-iconnect.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d947045106..f8ca6fa88192 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; From b74ffd85e32d44e8ed405a2a0a175ef4cd39cf67 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:57 +0200 Subject: [PATCH 0570/1098] ARM: Kirkwood: fix Makefile.boot While building the dtbs target, one is getting: make dtbs make[1]: *** No rule to make target `arch/arm/boot/kirkwood-qnap-ts219.dtb', needed by `arch/arm/boot/dtbs'. Stop. make: *** [dtbs] Error 2 The reason is that there's no kirkwood-qnap-ts219.dts file. Update Makefile.boot to reflect the dts files present. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Makefile.boot | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409b..e2ad35803d27 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb From 908d6d52928a7f2a4b317aac47542c5fbef43d88 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 15 Aug 2012 01:10:04 +0300 Subject: [PATCH 0571/1098] regulator: twl-regulator: fix up VINTANA1/VINTANA2 It seems commit 2098e95ce9bb039ff2e7bf836df358d18a176139 (regulator: twl: adapt twl-regulator driver to dt) accidentally deleted VINTANA1. Also the same commit defines VINTANA2 twice with TWL4030_ADJUSTABLE_LDO and TWL4030_FIXED_LDO. This patch changes the fixed one to be VINTANA1. I noticed this when auditing my N900 boot logs. I could not notice any change in device behaviour, though, except that the boot logs are now like before: ... [ 0.282928] VDAC: 1800 mV normal standby [ 0.284027] VCSI: 1800 mV normal standby [ 0.285400] VINTANA1: 1500 mV normal standby [ 0.286865] VINTANA2: 2750 mV normal standby [ 0.288208] VINTDIG: 1500 mV normal standby [ 0.289978] VSDI_CSI: 1800 mV normal standby ... Signed-off-by: Aaro Koskinen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/twl-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 30cb62289b74..77a71a5c17c3 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1037,7 +1037,7 @@ TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300); TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300); -TWL4030_FIXED_LDO(VINTANA2, 0x3f, 1500, 11, 100, 0x08); +TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08); TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08); @@ -1116,7 +1116,7 @@ static const struct of_device_id twl_of_match[] __devinitconst = { TWL6025_OF_MATCH("ti,twl6025-ldo6", LDO6), TWL6025_OF_MATCH("ti,twl6025-ldoln", LDOLN), TWL6025_OF_MATCH("ti,twl6025-ldousb", LDOUSB), - TWLFIXED_OF_MATCH("ti,twl4030-vintana2", VINTANA2), + TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1), TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5), TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8), From 6330c790dae1229bb33571c48984ca42a8a4c250 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 11:52:01 -0400 Subject: [PATCH 0572/1098] C6X: add Lx_CACHE_SHIFT defines C6X currently lacks Lx_CACHE_SHIFT defines which are needed in a few places in the generic kernel. This patch adds _SHIFT defines for the various caches and bases the Lx_CACHE_BYTES defines on them. Signed-off-by: Mark Salter --- arch/c6x/include/asm/cache.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 6d521d96d941..09c5a0f5f4d1 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Port on Texas Instruments TMS320C6x architecture * - * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) * * This program is free software; you can redistribute it and/or modify @@ -16,9 +16,14 @@ /* * Cache line size */ -#define L1D_CACHE_BYTES 64 -#define L1P_CACHE_BYTES 32 -#define L2_CACHE_BYTES 128 +#define L1D_CACHE_SHIFT 6 +#define L1D_CACHE_BYTES (1 << L1D_CACHE_SHIFT) + +#define L1P_CACHE_SHIFT 5 +#define L1P_CACHE_BYTES (1 << L1P_CACHE_SHIFT) + +#define L2_CACHE_SHIFT 7 +#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) /* * L2 used as cache @@ -29,7 +34,8 @@ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than * the L2 line size */ -#define L1_CACHE_BYTES L2_CACHE_BYTES +#define L1_CACHE_SHIFT L2_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define L2_CACHE_ALIGN_LOW(x) \ (((x) & ~(L2_CACHE_BYTES - 1))) From 01ddd9a809b9a95df097ff1b5565f806e681a606 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 12:12:16 -0400 Subject: [PATCH 0573/1098] C6X: select GENERIC_ATOMIC64 The generic atomic64 support came in 2009 to support the perf subsystem with the expectation that all architectures would implement atomic64 support. Since then, other optional parts of the generic kernel have also come to expect atomic64 support. This patch enables generic atomic64 support for C6X architecture. Signed-off-by: Mark Salter --- arch/c6x/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 052f81a76239..983c859e40b7 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -6,6 +6,7 @@ config C6X def_bool y select CLKDEV_LOOKUP + select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG From 3d0882c0d10d4b4785aeaf26043e764e3aaca825 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 4 Aug 2012 23:27:32 +0200 Subject: [PATCH 0574/1098] PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state() If a PCI device is put into D3_cold by acpi_bus_set_power(), the message printed by acpi_pci_set_power_state() says that its power state has been changed to D4, which doesn't make sense. In turn, if the device is put into D3_hot, the message simply says "D3" without specifying the variant of the D3 state. Fix this by using the pci_power_name() macro for printing the state name instead of building it from the numeric value corresponding to the given state directly. Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas --- drivers/pci/pci-acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index fbf7b26c7c8a..c5792d622dc4 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -266,8 +266,8 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) } if (!error) - dev_printk(KERN_INFO, &dev->dev, - "power state changed by ACPI to D%d\n", state); + dev_info(&dev->dev, "power state changed by ACPI to %s\n", + pci_power_name(state)); return error; } From 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 12 Aug 2012 23:26:07 +0200 Subject: [PATCH 0575/1098] PCI: EHCI: Fix crash during hibernation on ASUS computers Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS computers) added a workaround for an ASUS suspend issue related to USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut down the EHCI controller during system suspend if its PCI command register doesn't contain 0 at that time. It turns out that the same workaround is necessary in the analogous hibernation code path, so add it. References: https://bugzilla.kernel.org/show_bug.cgi?id=45811 Reported-and-tested-by: Oleksij Rempel Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org --- drivers/pci/pci-driver.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 185be3703343..5270f1a99328 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -959,6 +959,13 @@ static int pci_pm_poweroff_noirq(struct device *dev) if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) pci_prepare_to_sleep(pci_dev); + /* + * The reason for doing this here is the same as for the analogous code + * in pci_pm_suspend_noirq(). + */ + if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI) + pci_write_config_word(pci_dev, PCI_COMMAND, 0); + return 0; } From 142ad5db2b29a1c392e1b14934fae5d161d6c6e7 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 10 Aug 2012 00:07:58 +0000 Subject: [PATCH 0576/1098] IB: Fix typos in infiniband drivers Correct spelling typos in comments in drivers/infiniband. Signed-off-by: Masanari Iida Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_rnic.c | 2 +- drivers/infiniband/hw/cxgb3/iwch_cm.c | 2 +- drivers/infiniband/hw/qib/qib_sd7220.c | 2 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 8c81992fa6db..e4a73158fc7f 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -439,7 +439,7 @@ static int c2_rnic_close(struct c2_dev *c2dev) /* * Called by c2_probe to initialize the RNIC. This principally - * involves initalizing the various limits and resouce pools that + * involves initializing the various limits and resource pools that * comprise the RNIC instance. */ int __devinit c2_rnic_init(struct c2_dev *c2dev) diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 77b6b182778a..aaf88ef9409c 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1680,7 +1680,7 @@ static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) * T3A does 3 things when a TERM is received: * 1) send up a CPL_RDMA_TERMINATE message with the TERM packet * 2) generate an async event on the QP with the TERMINATE opcode - * 3) post a TERMINATE opcde cqe into the associated CQ. + * 3) post a TERMINATE opcode cqe into the associated CQ. * * For (1), we save the message in the qp for later consumer consumption. * For (2), we move the QP into TERMINATE, post a QP event and disconnect. diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c index a322d5171a2c..50a8a0d4fe67 100644 --- a/drivers/infiniband/hw/qib/qib_sd7220.c +++ b/drivers/infiniband/hw/qib/qib_sd7220.c @@ -372,7 +372,7 @@ static void qib_sd_trimdone_monitor(struct qib_devdata *dd, /* Read CTRL reg for each channel to check TRIMDONE */ if (baduns & (1 << chn)) { qib_dev_err(dd, - "Reseting TRIMDONE on chn %d (%s)\n", + "Resetting TRIMDONE on chn %d (%s)\n", chn, where); ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(chn), 0x10, 0x10); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 7a0ce8d42887..9e1449f8c6a2 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -1469,7 +1469,7 @@ static void srpt_handle_send_comp(struct srpt_rdma_ch *ch, * * XXX: what is now target_execute_cmd used to be asynchronous, and unmapping * the data that has been transferred via IB RDMA had to be postponed until the - * check_stop_free() callback. None of this is nessecary anymore and needs to + * check_stop_free() callback. None of this is necessary anymore and needs to * be cleaned up. */ static void srpt_handle_rdma_comp(struct srpt_rdma_ch *ch, From 51fa3ca37e3bebb291dbe50faa3cb259af35e978 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 12:58:35 +0000 Subject: [PATCH 0577/1098] IB/qib: Fix error return code in qib_init_7322_variables() Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Acked-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_iba7322.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 0d7280af99bc..3f6b21e9dc11 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -6346,8 +6346,10 @@ static int qib_init_7322_variables(struct qib_devdata *dd) dd->piobcnt4k * dd->align4k; dd->piovl15base = ioremap_nocache(vl15off, NUM_VL15_BUFS * dd->align4k); - if (!dd->piovl15base) + if (!dd->piovl15base) { + ret = -ENOMEM; goto bail; + } } qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ From 220329916c72ee3d54ae7262b215a050f04a18fc Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 14 Aug 2012 13:18:53 +0000 Subject: [PATCH 0578/1098] IB/srp: Fix a race condition Avoid a crash caused by the scmnd->scsi_done(scmnd) call in srp_process_rsp() being invoked with scsi_done == NULL. This can happen if a reply is received during or after a command abort. Reported-by: Joseph Glanville Reference: http://marc.info/?l=linux-rdma&m=134314367801595 Cc: Acked-by: David Dillow Signed-off-by: Bart Van Assche Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 87 +++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 24 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index bcbf22ee0aa7..1b5b0c730054 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -586,24 +586,62 @@ static void srp_unmap_data(struct scsi_cmnd *scmnd, scmnd->sc_data_direction); } -static void srp_remove_req(struct srp_target_port *target, - struct srp_request *req, s32 req_lim_delta) +/** + * srp_claim_req - Take ownership of the scmnd associated with a request. + * @target: SRP target port. + * @req: SRP request. + * @scmnd: If NULL, take ownership of @req->scmnd. If not NULL, only take + * ownership of @req->scmnd if it equals @scmnd. + * + * Return value: + * Either NULL or a pointer to the SCSI command the caller became owner of. + */ +static struct scsi_cmnd *srp_claim_req(struct srp_target_port *target, + struct srp_request *req, + struct scsi_cmnd *scmnd) { unsigned long flags; - srp_unmap_data(req->scmnd, target, req); + spin_lock_irqsave(&target->lock, flags); + if (!scmnd) { + scmnd = req->scmnd; + req->scmnd = NULL; + } else if (req->scmnd == scmnd) { + req->scmnd = NULL; + } else { + scmnd = NULL; + } + spin_unlock_irqrestore(&target->lock, flags); + + return scmnd; +} + +/** + * srp_free_req() - Unmap data and add request to the free request list. + */ +static void srp_free_req(struct srp_target_port *target, + struct srp_request *req, struct scsi_cmnd *scmnd, + s32 req_lim_delta) +{ + unsigned long flags; + + srp_unmap_data(scmnd, target, req); + spin_lock_irqsave(&target->lock, flags); target->req_lim += req_lim_delta; - req->scmnd = NULL; list_add_tail(&req->list, &target->free_reqs); spin_unlock_irqrestore(&target->lock, flags); } static void srp_reset_req(struct srp_target_port *target, struct srp_request *req) { - req->scmnd->result = DID_RESET << 16; - req->scmnd->scsi_done(req->scmnd); - srp_remove_req(target, req, 0); + struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL); + + if (scmnd) { + scmnd->result = DID_RESET << 16; + scmnd->scsi_done(scmnd); + srp_free_req(target, req, scmnd, 0); + } } static int srp_reconnect_target(struct srp_target_port *target) @@ -1073,11 +1111,18 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) complete(&target->tsk_mgmt_done); } else { req = &target->req_ring[rsp->tag]; - scmnd = req->scmnd; - if (!scmnd) + scmnd = srp_claim_req(target, req, NULL); + if (!scmnd) { shost_printk(KERN_ERR, target->scsi_host, "Null scmnd for RSP w/tag %016llx\n", (unsigned long long) rsp->tag); + + spin_lock_irqsave(&target->lock, flags); + target->req_lim += be32_to_cpu(rsp->req_lim_delta); + spin_unlock_irqrestore(&target->lock, flags); + + return; + } scmnd->result = rsp->status; if (rsp->flags & SRP_RSP_FLAG_SNSVALID) { @@ -1092,7 +1137,9 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER)) scsi_set_resid(scmnd, be32_to_cpu(rsp->data_in_res_cnt)); - srp_remove_req(target, req, be32_to_cpu(rsp->req_lim_delta)); + srp_free_req(target, req, scmnd, + be32_to_cpu(rsp->req_lim_delta)); + scmnd->host_scribble = NULL; scmnd->scsi_done(scmnd); } @@ -1631,25 +1678,17 @@ static int srp_abort(struct scsi_cmnd *scmnd) { struct srp_target_port *target = host_to_target(scmnd->device->host); struct srp_request *req = (struct srp_request *) scmnd->host_scribble; - int ret = SUCCESS; shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n"); - if (!req || target->qp_in_error) - return FAILED; - if (srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, - SRP_TSK_ABORT_TASK)) + if (!req || target->qp_in_error || !srp_claim_req(target, req, scmnd)) return FAILED; + srp_send_tsk_mgmt(target, req->index, scmnd->device->lun, + SRP_TSK_ABORT_TASK); + srp_free_req(target, req, scmnd, 0); + scmnd->result = DID_ABORT << 16; - if (req->scmnd) { - if (!target->tsk_mgmt_status) { - srp_remove_req(target, req, 0); - scmnd->result = DID_ABORT << 16; - } else - ret = FAILED; - } - - return ret; + return SUCCESS; } static int srp_reset_device(struct scsi_cmnd *scmnd) From c03307eab68d583ea6db917681afa14ed1fb3b84 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 14 Aug 2012 08:19:33 -0700 Subject: [PATCH 0579/1098] bridge: fix rcu dereference outside of rcu_read_lock Alternative solution for problem found by Linux Driver Verification project (linuxtesting.org). As it noted in the comment before the br_handle_frame_finish function, this function should be called under rcu_read_lock. The problem callgraph: br_dev_xmit -> br_nf_pre_routing_finish_bridge_slow -> -> br_handle_frame_finish -> br_port_get_rcu -> rcu_dereference And in this case there is no read-lock section. Reported-by: Denis Efremov Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 32211fa5b506..070e8a68cfc6 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -31,9 +31,11 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) struct net_bridge_mdb_entry *mdst; struct br_cpu_netstats *brstats = this_cpu_ptr(br->stats); + rcu_read_lock(); #ifdef CONFIG_BRIDGE_NETFILTER if (skb->nf_bridge && (skb->nf_bridge->mask & BRNF_BRIDGED_DNAT)) { br_nf_pre_routing_finish_bridge_slow(skb); + rcu_read_unlock(); return NETDEV_TX_OK; } #endif @@ -48,7 +50,6 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) skb_reset_mac_header(skb); skb_pull(skb, ETH_HLEN); - rcu_read_lock(); if (is_broadcast_ether_addr(dest)) br_flood_deliver(br, skb); else if (is_multicast_ether_addr(dest)) { From e3bc4ffb814c847bde7706a80d5684d12c676a8b Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Tue, 14 Aug 2012 17:13:36 +0100 Subject: [PATCH 0580/1098] vmxnet3: Fix race between dev_open() and register_netdev() dev_open() can complete before register_netdev() returns. Fix vmxnet3_probe_device() to support this. Signed-off-by: Steve Hodgson Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 93e0cfb739b8..ce9d4f2c9776 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3019,6 +3019,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, netdev->watchdog_timeo = 5 * HZ; INIT_WORK(&adapter->work, vmxnet3_reset_work); + set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); if (adapter->intr.type == VMXNET3_IT_MSIX) { int i; @@ -3043,7 +3044,6 @@ vmxnet3_probe_device(struct pci_dev *pdev, goto err_register; } - set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); vmxnet3_check_link(adapter, false); atomic_inc(&devices_found); return 0; From f1b5c997e68533df1f96dcd3068a231bca495603 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 15 Aug 2012 15:43:33 +0200 Subject: [PATCH 0581/1098] USB: option: add ZTE K5006-Z MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Cc: Thomas Schäfer Cc: stable Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 99306281dcba..cc40f47ecea1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, From 1e658489ba8d87b7c89ca6f734b8319acc534dbc Mon Sep 17 00:00:00 2001 From: Mark Ferrell Date: Tue, 24 Jul 2012 13:38:31 -0500 Subject: [PATCH 0582/1098] USB: serial: Fix mos7840 timeout * mos7840 driver was using multiple of HZ for the timeout handed off to usb_control_msg(). Changed the timeout to use msecs instead. * Remove unused WAIT_FOR_EVER definition Signed-off-by: Mark Ferrell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 009c1d99e146..2f6da1e89bfa 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -82,8 +82,7 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ +#define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -1347,7 +1346,7 @@ static void mos7840_close(struct usb_serial_port *port) static void mos7840_block_until_chase_response(struct tty_struct *tty, struct moschip_port *mos7840_port) { - int timeout = 1 * HZ; + int timeout = msecs_to_jiffies(1000); int wait = 10; int count; @@ -2675,7 +2674,7 @@ static int mos7840_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); + (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT); return 0; error: for (/* nothing */; i >= 0; i--) { From 1690d86aa33fa14c0ae4ac97e59d806eeddccd2c Mon Sep 17 00:00:00 2001 From: Alex Gershgorin Date: Wed, 1 Aug 2012 05:05:10 -0300 Subject: [PATCH 0583/1098] [media] media: mx3_camera: buf_init() add buffer state check This patch checks the state of the buffer when calling .buf_init() method. This is needed for the USERPTR buffer type, because in that case .buf_init() is called every time a buffer is queued, and not only once during the preparation stage, like in the MMAP case. Without this check buffers get initialised repeatedly, which also leads to the allocation of new DMA descriptors, of which there is only a final relatively small number available. Both MMAP and USERPTR methods were successfully tested. Signed-off-by: Alex Gershgorin [g.liakhovetski@gmx.de: remove mx3_camera_buffer::state completely] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx3_camera.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index f13643d31353..af2297dd49c8 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -61,15 +61,9 @@ #define MAX_VIDEO_MEM 16 -enum csi_buffer_state { - CSI_BUF_NEEDS_INIT, - CSI_BUF_PREPARED, -}; - struct mx3_camera_buffer { /* common v4l buffer stuff -- must be first */ struct vb2_buffer vb; - enum csi_buffer_state state; struct list_head queue; /* One descriptot per scatterlist (per frame) */ @@ -285,7 +279,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) goto error; } - if (buf->state == CSI_BUF_NEEDS_INIT) { + if (!buf->txd) { sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0); sg_dma_len(sg) = new_size; @@ -298,7 +292,6 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) txd->callback_param = txd; txd->callback = mx3_cam_dma_done; - buf->state = CSI_BUF_PREPARED; buf->txd = txd; } else { txd = buf->txd; @@ -385,7 +378,6 @@ static void mx3_videobuf_release(struct vb2_buffer *vb) /* Doesn't hurt also if the list is empty */ list_del_init(&buf->queue); - buf->state = CSI_BUF_NEEDS_INIT; if (txd) { buf->txd = NULL; @@ -405,13 +397,13 @@ static int mx3_videobuf_init(struct vb2_buffer *vb) struct mx3_camera_dev *mx3_cam = ici->priv; struct mx3_camera_buffer *buf = to_mx3_vb(vb); - /* This is for locking debugging only */ - INIT_LIST_HEAD(&buf->queue); - sg_init_table(&buf->sg, 1); + if (!buf->txd) { + /* This is for locking debugging only */ + INIT_LIST_HEAD(&buf->queue); + sg_init_table(&buf->sg, 1); - buf->state = CSI_BUF_NEEDS_INIT; - - mx3_cam->buf_total += vb2_plane_size(vb, 0); + mx3_cam->buf_total += vb2_plane_size(vb, 0); + } return 0; } From 5c4dfc84a88e1108f5ddba256ecaab6fe45f94e5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 25 May 2012 20:14:47 -0300 Subject: [PATCH 0584/1098] [media] video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare Prepare the clock before enabling it. Cc: Guennadi Liakhovetski Cc: Signed-off-by: Fabio Estevam Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index d2e6f82ecfac..560a65aa7038 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -403,7 +403,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev) dev_dbg(pcdev->icd->parent, "Activate device\n"); - clk_enable(pcdev->clk); + clk_prepare_enable(pcdev->clk); /* enable CSI before doing anything else */ __raw_writel(csicr1, pcdev->base + CSICR1); @@ -422,7 +422,7 @@ static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev) /* Disable all CSI interface */ __raw_writel(0x00, pcdev->base + CSICR1); - clk_disable(pcdev->clk); + clk_disable_unprepare(pcdev->clk); } /* From f8afbf3caa991655e989ecd10c135162d84288b2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 25 May 2012 20:14:48 -0300 Subject: [PATCH 0585/1098] [media] video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare Prepare the clock before enabling it. Cc: Guennadi Liakhovetski Cc: Signed-off-by: Fabio Estevam Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx2_camera.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 637bde8aca28..2c3ec94769a5 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -407,7 +407,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) { unsigned long flags; - clk_disable(pcdev->clk_csi); + clk_disable_unprepare(pcdev->clk_csi); writel(0, pcdev->base_csi + CSICR1); if (cpu_is_mx27()) { writel(0, pcdev->base_emma + PRP_CNTL); @@ -435,7 +435,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) if (pcdev->icd) return -EBUSY; - ret = clk_enable(pcdev->clk_csi); + ret = clk_prepare_enable(pcdev->clk_csi); if (ret < 0) return ret; @@ -1639,7 +1639,7 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) goto exit_free_irq; } - clk_enable(pcdev->clk_emma); + clk_prepare_enable(pcdev->clk_emma); err = mx27_camera_emma_prp_reset(pcdev); if (err) @@ -1648,7 +1648,7 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) return err; exit_clk_emma_put: - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); exit_free_irq: free_irq(pcdev->irq_emma, pcdev); @@ -1785,7 +1785,7 @@ exit_free_emma: eallocctx: if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); @@ -1825,7 +1825,7 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) iounmap(pcdev->base_csi); if (cpu_is_mx27()) { - clk_disable(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma); clk_put(pcdev->clk_emma); iounmap(pcdev->base_emma); res = pcdev->res_emma; From ad5b987031835b0ac3064ef12209282277dbae54 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Wed, 1 Aug 2012 06:16:44 -0300 Subject: [PATCH 0586/1098] [media] media: mx2_camera: Fix clock handling for i.MX27 On i.MX27 two clocks are required: emma-ipg and emma-ahb. The ahb clock has to be requested using both a device and a connection ID. Signed-off-by: Javier Martin [g.liakhovetski@gmx.de: rebase to the current media tree] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx2_camera.c | 43 +++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 2c3ec94769a5..ac175406e582 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -272,7 +272,7 @@ struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; struct soc_camera_device *icd; - struct clk *clk_csi, *clk_emma; + struct clk *clk_csi, *clk_emma_ahb, *clk_emma_ipg; unsigned int irq_csi, irq_emma; void __iomem *base_csi, *base_emma; @@ -1633,23 +1633,34 @@ static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) goto exit_iounmap; } - pcdev->clk_emma = clk_get(NULL, "emma"); - if (IS_ERR(pcdev->clk_emma)) { - err = PTR_ERR(pcdev->clk_emma); + pcdev->clk_emma_ipg = clk_get(pcdev->dev, "emma-ipg"); + if (IS_ERR(pcdev->clk_emma_ipg)) { + err = PTR_ERR(pcdev->clk_emma_ipg); goto exit_free_irq; } - clk_prepare_enable(pcdev->clk_emma); + clk_prepare_enable(pcdev->clk_emma_ipg); + + pcdev->clk_emma_ahb = clk_get(pcdev->dev, "emma-ahb"); + if (IS_ERR(pcdev->clk_emma_ahb)) { + err = PTR_ERR(pcdev->clk_emma_ahb); + goto exit_clk_emma_ipg_put; + } + + clk_prepare_enable(pcdev->clk_emma_ahb); err = mx27_camera_emma_prp_reset(pcdev); if (err) - goto exit_clk_emma_put; + goto exit_clk_emma_ahb_put; return err; -exit_clk_emma_put: - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); +exit_clk_emma_ahb_put: + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); +exit_clk_emma_ipg_put: + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); exit_free_irq: free_irq(pcdev->irq_emma, pcdev); exit_iounmap: @@ -1685,7 +1696,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit; } - pcdev->clk_csi = clk_get(&pdev->dev, NULL); + pcdev->clk_csi = clk_get(&pdev->dev, "ahb"); if (IS_ERR(pcdev->clk_csi)) { dev_err(&pdev->dev, "Could not get csi clock\n"); err = PTR_ERR(pcdev->clk_csi); @@ -1785,8 +1796,10 @@ exit_free_emma: eallocctx: if (cpu_is_mx27()) { free_irq(pcdev->irq_emma, pcdev); - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); iounmap(pcdev->base_emma); release_mem_region(pcdev->res_emma->start, resource_size(pcdev->res_emma)); } @@ -1825,8 +1838,10 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) iounmap(pcdev->base_csi); if (cpu_is_mx27()) { - clk_disable_unprepare(pcdev->clk_emma); - clk_put(pcdev->clk_emma); + clk_disable_unprepare(pcdev->clk_emma_ipg); + clk_put(pcdev->clk_emma_ipg); + clk_disable_unprepare(pcdev->clk_emma_ahb); + clk_put(pcdev->clk_emma_ahb); iounmap(pcdev->base_emma); res = pcdev->res_emma; release_mem_region(res->start, resource_size(res)); From 991b3137f21e13db4711f313edbe67d49bed795b Mon Sep 17 00:00:00 2001 From: Albert Wang Date: Wed, 1 Aug 2012 02:45:41 -0300 Subject: [PATCH 0587/1098] [media] media: soc_camera: don't clear pix->sizeimage in JPEG mode In JPEG mode, the size of image is variable due to different JPEG compression rate. We only can get the pix->sizeimage from the user. If we clear pix->sizeimage in soc_camera_try_fmt() then we will get it from: ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline, pix->height); if (ret < 0) return ret; pix->sizeimage = max_t(u32, pix->sizeimage, ret); In general, this sizeimage will be larger than the actul JPEG image size. But vb2 will check the buffer and size of image in __qbuf_userptr(): /* Check if the provided plane buffer is large enough */ if (planes[plane].length < q->plane_sizes[plane]) So we shouldn't clear the pix->sizeimage and also shouldn't re-calculate the pix->sizeimage in soc_mbus_image_size() in JPEG mode We also shouldn't re-calculate pix->bytesperline: ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt); if (ret < 0) return ret; pix->bytesperline = max_t(u32, pix->bytesperline, ret); pix->bytesperline also should be set by the user or by the driver's try_fmt() implementation. Change-Id: I700690a2287346127a624b5260922eaa5427a596 Signed-off-by: Albert Wang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 3 ++- drivers/media/video/soc_mediabus.c | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b03ffecb7438..1bde255e45df 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -171,7 +171,8 @@ static int soc_camera_try_fmt(struct soc_camera_device *icd, dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n", pixfmtstr(pix->pixelformat), pix->width, pix->height); - if (!(ici->capabilities & SOCAM_HOST_CAP_STRIDE)) { + if (pix->pixelformat != V4L2_PIX_FMT_JPEG && + !(ici->capabilities & SOCAM_HOST_CAP_STRIDE)) { pix->bytesperline = 0; pix->sizeimage = 0; } diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c index 89dce097a827..a397812635d6 100644 --- a/drivers/media/video/soc_mediabus.c +++ b/drivers/media/video/soc_mediabus.c @@ -378,6 +378,9 @@ EXPORT_SYMBOL(soc_mbus_samples_per_pixel); s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf) { + if (mf->fourcc == V4L2_PIX_FMT_JPEG) + return 0; + if (mf->layout != SOC_MBUS_LAYOUT_PACKED) return width * mf->bits_per_sample / 8; @@ -400,6 +403,9 @@ EXPORT_SYMBOL(soc_mbus_bytes_per_line); s32 soc_mbus_image_size(const struct soc_mbus_pixelfmt *mf, u32 bytes_per_line, u32 height) { + if (mf->fourcc == V4L2_PIX_FMT_JPEG) + return 0; + if (mf->layout == SOC_MBUS_LAYOUT_PACKED) return bytes_per_line * height; From 89dd86db78e08b51bab29e168fd41b2fd943e6b6 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Mon, 13 Aug 2012 08:15:06 +0000 Subject: [PATCH 0588/1098] mlx4_core: Allow large mlx4_buddy bitmaps mlx4_buddy_init uses kmalloc() to allocate bitmaps, which fails when the required size is beyond the max supported value (or when memory is too fragmented to handle a huge allocation). Extend this to use use vmalloc() if kmalloc() fails, and take that into account when freeing the bitmaps as well. This fixes a driver load failure when log num mtt is 26 or higher, and is a step in the direction of allowing to register huge amounts of memory on large memory systems. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/mr.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index af55b7ce5341..d6a3a392a377 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -130,8 +131,11 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) for (i = 0; i <= buddy->max_order; ++i) { s = BITS_TO_LONGS(1 << (buddy->max_order - i)); buddy->bits[i] = kmalloc(s * sizeof (long), GFP_KERNEL); - if (!buddy->bits[i]) - goto err_out_free; + if (!buddy->bits[i]) { + buddy->bits[i] = vmalloc(s * sizeof(long)); + if (!buddy->bits[i]) + goto err_out_free; + } bitmap_zero(buddy->bits[i], 1 << (buddy->max_order - i)); } @@ -142,7 +146,10 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) err_out_free: for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (buddy->bits[i] && is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); err_out: kfree(buddy->bits); @@ -156,7 +163,10 @@ static void mlx4_buddy_cleanup(struct mlx4_buddy *buddy) int i; for (i = 0; i <= buddy->max_order; ++i) - kfree(buddy->bits[i]); + if (is_vmalloc_addr(buddy->bits[i])) + vfree(buddy->bits[i]); + else + kfree(buddy->bits[i]); kfree(buddy->bits); kfree(buddy->num_free); From 3de819e6b642fdd51904f5f4d2716d7466a2f7f5 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Mon, 13 Aug 2012 08:15:07 +0000 Subject: [PATCH 0589/1098] mlx4_core: Fix integer overflow issues around MTT table Fix some issues around int variables used in data structures related to memory registration. Handle int overflow in mlx4_init_icm_table by using a u64 intermediate variable and changing struct mlx4_icm_table num_obj field to be u32. Change some more fields/variables to use u32 instead of int to prevent a case where the variable becomes negative when bit 31 is set. Also subtract log_mtts_per_seg from the exponent when computing num_mtt, since its added later on in that very same code area. This and the previous commit fixes some issues which actually prevent commit db5a7a65c058 ("mlx4_core: Scale size of MTT table with system RAM") from working. Now, when the number of MTTs is scaled with the size of the RAM we can map up to 8TB. Signed-off-by: Yishai Hadas Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/icm.c | 9 ++++++--- drivers/net/ethernet/mellanox/mlx4/icm.h | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mr.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/profile.c | 4 ++-- 5 files changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index 88b7b3e75ab1..daf417923661 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -358,13 +358,14 @@ void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, } int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent) { int obj_per_chunk; int num_icm; unsigned chunk_size; int i; + u64 size; obj_per_chunk = MLX4_TABLE_CHUNK_SIZE / obj_size; num_icm = (nobj + obj_per_chunk - 1) / obj_per_chunk; @@ -380,10 +381,12 @@ int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, table->coherent = use_coherent; mutex_init(&table->mutex); + size = (u64) nobj * obj_size; for (i = 0; i * MLX4_TABLE_CHUNK_SIZE < reserved * obj_size; ++i) { chunk_size = MLX4_TABLE_CHUNK_SIZE; - if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > nobj * obj_size) - chunk_size = PAGE_ALIGN(nobj * obj_size - i * MLX4_TABLE_CHUNK_SIZE); + if ((i + 1) * MLX4_TABLE_CHUNK_SIZE > size) + chunk_size = PAGE_ALIGN(size - + i * MLX4_TABLE_CHUNK_SIZE); table->icm[i] = mlx4_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index 19e4efc0b342..a67744f53506 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -78,7 +78,7 @@ int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, int start, int end); int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, - u64 virt, int obj_size, int nobj, int reserved, + u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent); void mlx4_cleanup_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table); void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle); diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 59ebc0339638..4d9df8f2a126 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -249,7 +249,7 @@ struct mlx4_bitmap { struct mlx4_buddy { unsigned long **bits; unsigned int *num_free; - int max_order; + u32 max_order; spinlock_t lock; }; @@ -258,7 +258,7 @@ struct mlx4_icm; struct mlx4_icm_table { u64 virt; int num_icm; - int num_obj; + u32 num_obj; int obj_size; int lowmem; int coherent; diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index d6a3a392a377..44b8e1ea1cd8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -678,7 +678,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) return err; err = mlx4_buddy_init(&mr_table->mtt_buddy, - ilog2(dev->caps.num_mtts / + ilog2((u32)dev->caps.num_mtts / (1 << log_mtts_per_seg))); if (err) goto err_buddy; @@ -688,7 +688,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) mlx4_alloc_mtt_range(dev, fls(dev->caps.reserved_mtts - 1)); if (priv->reserved_mtts < 0) { - mlx4_warn(dev, "MTT table of order %d is too small.\n", + mlx4_warn(dev, "MTT table of order %u is too small.\n", mr_table->mtt_buddy.max_order); err = -ENOMEM; goto err_reserve_mtts; diff --git a/drivers/net/ethernet/mellanox/mlx4/profile.c b/drivers/net/ethernet/mellanox/mlx4/profile.c index 9ee4725363d5..8e0c3cc2a1ec 100644 --- a/drivers/net/ethernet/mellanox/mlx4/profile.c +++ b/drivers/net/ethernet/mellanox/mlx4/profile.c @@ -76,7 +76,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, u64 size; u64 start; int type; - int num; + u32 num; int log_num; }; @@ -105,7 +105,7 @@ u64 mlx4_make_profile(struct mlx4_dev *dev, si_meminfo(&si); request->num_mtt = roundup_pow_of_two(max_t(unsigned, request->num_mtt, - min(1UL << 31, + min(1UL << (31 - log_mtts_per_seg), si.totalram >> (log_mtts_per_seg - 1)))); profile[MLX4_RES_QP].size = dev_cap->qpc_entry_sz; From 96f17d590092ae2511adf599a252e8ed1901b7a4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 14 Aug 2012 15:17:10 -0700 Subject: [PATCH 0590/1098] mlx4_core: Clean up buddy bitmap allocation - Use kcalloc() / vzalloc() instead of an extra bitmap_zero(). - Add __GFP_NOWARN to kcalloc() since we'll try vzalloc() if it fails. Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/mr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 44b8e1ea1cd8..c202d3ad2a0e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -121,7 +121,7 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) buddy->max_order = max_order; spin_lock_init(&buddy->lock); - buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *), + buddy->bits = kcalloc(buddy->max_order + 1, sizeof (long *), GFP_KERNEL); buddy->num_free = kcalloc((buddy->max_order + 1), sizeof *buddy->num_free, GFP_KERNEL); @@ -130,13 +130,12 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order) for (i = 0; i <= buddy->max_order; ++i) { s = BITS_TO_LONGS(1 << (buddy->max_order - i)); - buddy->bits[i] = kmalloc(s * sizeof (long), GFP_KERNEL); + buddy->bits[i] = kcalloc(s, sizeof (long), GFP_KERNEL | __GFP_NOWARN); if (!buddy->bits[i]) { - buddy->bits[i] = vmalloc(s * sizeof(long)); + buddy->bits[i] = vzalloc(s * sizeof(long)); if (!buddy->bits[i]) goto err_out_free; } - bitmap_zero(buddy->bits[i], 1 << (buddy->max_order - i)); } set_bit(0, buddy->bits[buddy->max_order]); From e862f1a9b7df4e8196ebec45ac62295138aa3fc2 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:44 +0000 Subject: [PATCH 0591/1098] atm: fix info leak in getsockopt(SO_ATMPVC) The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/atm/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/atm/common.c b/net/atm/common.c index b4b44dbed645..0c0ad930a632 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -812,6 +812,7 @@ int vcc_getsockopt(struct socket *sock, int level, int optname, if (!vcc->dev || !test_bit(ATM_VF_ADDR, &vcc->flags)) return -ENOTCONN; + memset(&pvc, 0, sizeof(pvc)); pvc.sap_family = AF_ATMPVC; pvc.sap_addr.itf = vcc->dev->number; pvc.sap_addr.vpi = vcc->vpi; From 3c0c5cfdcd4d69ffc4b9c0907cec99039f30a50a Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:45 +0000 Subject: [PATCH 0592/1098] atm: fix info leak via getsockname() The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/atm/pvc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/atm/pvc.c b/net/atm/pvc.c index 3a734919c36c..ae0324021407 100644 --- a/net/atm/pvc.c +++ b/net/atm/pvc.c @@ -95,6 +95,7 @@ static int pvc_getname(struct socket *sock, struct sockaddr *sockaddr, return -ENOTCONN; *sockaddr_len = sizeof(struct sockaddr_atmpvc); addr = (struct sockaddr_atmpvc *)sockaddr; + memset(addr, 0, sizeof(*addr)); addr->sap_family = AF_ATMPVC; addr->sap_addr.itf = vcc->dev->number; addr->sap_addr.vpi = vcc->vpi; From e15ca9a0ef9a86f0477530b0f44a725d67f889ee Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:46 +0000 Subject: [PATCH 0593/1098] Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER) The HCI code fails to initialize the two padding bytes of struct hci_ufilter before copying it to userland -- that for leaking two bytes kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/hci_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index a7f04de03d79..a27bbc3cd4b7 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -1009,6 +1009,7 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname, { struct hci_filter *f = &hci_pi(sk)->filter; + memset(&uf, 0, sizeof(uf)); uf.type_mask = f->type_mask; uf.opcode = f->opcode; uf.event_mask[0] = *((u32 *) f->event_mask + 0); From 3f68ba07b1da811bf383b4b701b129bfcb2e4988 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:47 +0000 Subject: [PATCH 0594/1098] Bluetooth: HCI - Fix info leak via getsockname() The HCI code fails to initialize the hci_channel member of struct sockaddr_hci and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize hci_channel with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/hci_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index a27bbc3cd4b7..19fdac78e555 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -694,6 +694,7 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, *addr_len = sizeof(*haddr); haddr->hci_family = AF_BLUETOOTH; haddr->hci_dev = hdev->id; + haddr->hci_channel= 0; release_sock(sk); return 0; From 9ad2de43f1aee7e7274a4e0d41465489299e344b Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:48 +0000 Subject: [PATCH 0595/1098] Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY) The RFCOMM code fails to initialize the key_size member of struct bt_security before copying it to userland -- that for leaking one byte kernel stack. Initialize key_size with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 7e1e59645c05..64f55ca61472 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -822,6 +822,7 @@ static int rfcomm_sock_getsockopt(struct socket *sock, int level, int optname, c } sec.level = rfcomm_pi(sk)->sec_level; + sec.key_size = 0; len = min_t(unsigned int, len, sizeof(sec)); if (copy_to_user(optval, (char *) &sec, len)) From f9432c5ec8b1e9a09b9b0e5569e3c73db8de432a Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:49 +0000 Subject: [PATCH 0596/1098] Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST) The RFCOMM code fails to initialize the two padding bytes of struct rfcomm_dev_list_req inserted for alignment before copying it to userland. Additionally there are two padding bytes in each instance of struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus dev_num times two bytes uninitialized kernel heap memory. Allocate the memory using kzalloc() to fix this issue. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index cb960773c002..56f182393c4c 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -456,7 +456,7 @@ static int rfcomm_get_dev_list(void __user *arg) size = sizeof(*dl) + dev_num * sizeof(*di); - dl = kmalloc(size, GFP_KERNEL); + dl = kzalloc(size, GFP_KERNEL); if (!dl) return -ENOMEM; From 9344a972961d1a6d2c04d9008b13617bcb6ec2ef Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:50 +0000 Subject: [PATCH 0597/1098] Bluetooth: RFCOMM - Fix info leak via getsockname() The RFCOMM code fails to initialize the trailing padding byte of struct sockaddr_rc added for alignment. It that for leaks one byte kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/rfcomm/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 64f55ca61472..1a17850d093c 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -528,6 +528,7 @@ static int rfcomm_sock_getname(struct socket *sock, struct sockaddr *addr, int * BT_DBG("sock %p, sk %p", sock, sk); + memset(sa, 0, sizeof(*sa)); sa->rc_family = AF_BLUETOOTH; sa->rc_channel = rfcomm_pi(sk)->channel; if (peer) From 792039c73cf176c8e39a6e8beef2c94ff46522ed Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:51 +0000 Subject: [PATCH 0598/1098] Bluetooth: L2CAP - Fix info leak via getsockname() The L2CAP code fails to initialize the l2_bdaddr_type member of struct sockaddr_l2 and the padding byte added for alignment. It that for leaks two bytes kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Signed-off-by: David S. Miller --- net/bluetooth/l2cap_sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index b94abd30e6f9..1497edd191a2 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -245,6 +245,7 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l BT_DBG("sock %p, sk %p", sock, sk); + memset(la, 0, sizeof(struct sockaddr_l2)); addr->sa_family = AF_BLUETOOTH; *len = sizeof(struct sockaddr_l2); From 04d4fbca1017c11381e7d82acea21dd741e748bc Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:52 +0000 Subject: [PATCH 0599/1098] l2tp: fix info leak via getsockname() The L2TP code for IPv6 fails to initialize the l2tp_unused member of struct sockaddr_l2tpip6 and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize l2tp_unused with 0 to avoid the info leak. Signed-off-by: Mathias Krause Cc: James Chapman Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index 35e1e4bde587..927547171bc7 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -410,6 +410,7 @@ static int l2tp_ip6_getname(struct socket *sock, struct sockaddr *uaddr, lsa->l2tp_family = AF_INET6; lsa->l2tp_flowinfo = 0; lsa->l2tp_scope_id = 0; + lsa->l2tp_unused = 0; if (peer) { if (!lsk->peer_conn_id) return -ENOTCONN; From 3592aaeb80290bda0f2cf0b5456c97bfc638b192 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:53 +0000 Subject: [PATCH 0600/1098] llc: fix info leak via getsockname() The LLC code wrongly returns 0, i.e. "success", when the socket is zapped. Together with the uninitialized uaddrlen pointer argument from sys_getsockname this leads to an arbitrary memory leak of up to 128 bytes kernel stack via the getsockname() syscall. Return an error instead when the socket is zapped to prevent the info leak. Also remove the unnecessary memset(0). We don't directly write to the memory pointed by uaddr but memcpy() a local structure at the end of the function that is properly initialized. Signed-off-by: Mathias Krause Cc: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/llc/af_llc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 8c2919ca36f6..c2190005a114 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -969,14 +969,13 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr, struct sockaddr_llc sllc; struct sock *sk = sock->sk; struct llc_sock *llc = llc_sk(sk); - int rc = 0; + int rc = -EBADF; memset(&sllc, 0, sizeof(sllc)); lock_sock(sk); if (sock_flag(sk, SOCK_ZAPPED)) goto out; *uaddrlen = sizeof(sllc); - memset(uaddr, 0, *uaddrlen); if (peer) { rc = -ENOTCONN; if (sk->sk_state != TCP_ESTABLISHED) From 276bdb82dedb290511467a5a4fdbe9f0b52dce6f Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:54 +0000 Subject: [PATCH 0601/1098] dccp: check ccid before dereferencing ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by: Mathias Krause Cc: Gerrit Renker Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- net/dccp/ccid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 75c3582a7678..fb85d371a8de 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -246,7 +246,7 @@ static inline int ccid_hc_rx_getsockopt(struct ccid *ccid, struct sock *sk, u32 __user *optval, int __user *optlen) { int rc = -ENOPROTOOPT; - if (ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL) + if (ccid != NULL && ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL) rc = ccid->ccid_ops->ccid_hc_rx_getsockopt(sk, optname, len, optval, optlen); return rc; @@ -257,7 +257,7 @@ static inline int ccid_hc_tx_getsockopt(struct ccid *ccid, struct sock *sk, u32 __user *optval, int __user *optlen) { int rc = -ENOPROTOOPT; - if (ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL) + if (ccid != NULL && ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL) rc = ccid->ccid_ops->ccid_hc_tx_getsockopt(sk, optname, len, optval, optlen); return rc; From 7b07f8eb75aa3097cdfd4f6eac3da49db787381d Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:55 +0000 Subject: [PATCH 0602/1098] dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO) The CCID3 code fails to initialize the trailing padding bytes of struct tfrc_tx_info added for alignment on 64 bit architectures. It that for potentially leaks four bytes kernel stack via the getsockopt() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Cc: Gerrit Renker Signed-off-by: David S. Miller --- net/dccp/ccids/ccid3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index d65e98798eca..119c04317d48 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -535,6 +535,7 @@ static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len, case DCCP_SOCKOPT_CCID_TX_INFO: if (len < sizeof(tfrc)) return -EINVAL; + memset(&tfrc, 0, sizeof(tfrc)); tfrc.tfrctx_x = hc->tx_x; tfrc.tfrctx_x_recv = hc->tx_x_recv; tfrc.tfrctx_x_calc = hc->tx_x_calc; From 2d8a041b7bfe1097af21441cb77d6af95f4f4680 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:56 +0000 Subject: [PATCH 0603/1098] ipvs: fix info leak in getsockopt(IP_VS_SO_GET_TIMEOUT) If at least one of CONFIG_IP_VS_PROTO_TCP or CONFIG_IP_VS_PROTO_UDP is not set, __ip_vs_get_timeouts() does not fully initialize the structure that gets copied to userland and that for leaks up to 12 bytes of kernel stack. Add an explicit memset(0) before passing the structure to __ip_vs_get_timeouts() to avoid the info leak. Signed-off-by: Mathias Krause Cc: Wensong Zhang Cc: Simon Horman Cc: Julian Anastasov Signed-off-by: David S. Miller --- net/netfilter/ipvs/ip_vs_ctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 84444dda194b..72bf32a84874 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2759,6 +2759,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) { struct ip_vs_timeout_user t; + memset(&t, 0, sizeof(t)); __ip_vs_get_timeouts(net, &t); if (copy_to_user(user, &t, sizeof(t)) != 0) ret = -EFAULT; From 43da5f2e0d0c69ded3d51907d9552310a6b545e8 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Aug 2012 11:31:57 +0000 Subject: [PATCH 0604/1098] net: fix info leak in compat dev_ifconf() The implementation of dev_ifconf() for the compat ioctl interface uses an intermediate ifc structure allocated in userland for the duration of the syscall. Though, it fails to initialize the padding bytes inserted for alignment and that for leaks four bytes of kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/socket.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/socket.c b/net/socket.c index dfe5b66c97e0..a5471f804d99 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2657,6 +2657,7 @@ static int dev_ifconf(struct net *net, struct compat_ifconf __user *uifc32) if (copy_from_user(&ifc32, uifc32, sizeof(struct compat_ifconf))) return -EFAULT; + memset(&ifc, 0, sizeof(ifc)); if (ifc32.ifcbuf == 0) { ifc32.ifc_len = 0; ifc.ifc_len = 0; From e9ba389c5ffc4dd29dfe17e00e48877302111135 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 15 Aug 2012 12:32:00 +0200 Subject: [PATCH 0605/1098] ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream A PCM capture stream on usb-audio causes a scheduling-while-atomic BUG, as reported in the bugzilla entry below. It's because snd_usb_endpoint_start() is called at first at trigger START for a capture stream, and this function contains the left-over EP deactivation codes. The problem doesn't happen for a playback stream because the function is called at PCM prepare time, which can sleep. This patch fixes the BUG by moving the EP deactivation code into the PCM prepare callback. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011 Cc: [v3.5+] Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 4 ---- sound/usb/pcm.c | 3 +++ 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 0f647d22cb4a..c41181202688 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -821,10 +821,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; - /* just to be sure */ - deactivate_urbs(ep, 0, 1); - wait_clear_urbs(ep); - ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index a1298f379428..62ec808ed792 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -544,6 +544,9 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->last_frame_number = 0; runtime->delay = 0; + /* clear the pending deactivation on the target EPs */ + deactivate_endpoints(subs); + /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) From 667a5313ecd7308d79629c0738b0db588b0b0a4e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 16 Aug 2012 16:46:12 +1000 Subject: [PATCH 0606/1098] md: Don't truncate size at 4TB for RAID0 and Linear commit 27a7b260f71439c40546b43588448faac01adb93 md: Fix handling for devices from 2TB to 4TB in 0.90 metadata. changed 0.90 metadata handling to truncated size to 4TB as that is all that 0.90 can record. However for RAID0 and Linear, 0.90 doesn't need to record the size, so this truncation is not needed and causes working arrays to become too small. So avoid the truncation for RAID0 and Linear This bug was introduced in 3.1 and is suitable for any stable kernels from then onwards. As the offending commit was tagged for 'stable', any stable kernel that it was applied to should also get this patch. That includes at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for providing that list). Cc: stable@vger.kernel.org Signed-off-by: Neil Brown --- drivers/md/md.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index fcd098794d37..3f6203a4c7ea 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1108,8 +1108,11 @@ static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor ret = 0; } rdev->sectors = rdev->sb_start; - /* Limit to 4TB as metadata cannot record more than that */ - if (rdev->sectors >= (2ULL << 32)) + /* Limit to 4TB as metadata cannot record more than that. + * (not needed for Linear and RAID0 as metadata doesn't + * record this size) + */ + if (rdev->sectors >= (2ULL << 32) && sb->level >= 1) rdev->sectors = (2ULL << 32) - 2; if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1) @@ -1400,7 +1403,7 @@ super_90_rdev_size_change(struct md_rdev *rdev, sector_t num_sectors) /* Limit to 4TB as metadata cannot record more than that. * 4TB == 2^32 KB, or 2*2^32 sectors. */ - if (num_sectors >= (2ULL << 32)) + if (num_sectors >= (2ULL << 32) && rdev->mddev->level >= 1) num_sectors = (2ULL << 32) - 2; md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); From 2614f86490122bf51eb7c12ec73927f1900f4e7d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 16 Aug 2012 02:25:24 +0200 Subject: [PATCH 0607/1098] netfilter: nf_ct_expect: fix possible access to uninitialized timer In __nf_ct_expect_check, the function refresh_timer returns 1 if a matching expectation is found and its timer is successfully refreshed. This results in nf_ct_expect_related returning 0. Note that at this point: - the passed expectation is not inserted in the expectation table and its timer was not initialized, since we have refreshed one matching/existing expectation. - nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation timer is in some undefined state just after the allocation, until it is appropriately initialized. This can be a problem for the SIP helper during the expectation addition: ... if (nf_ct_expect_related(rtp_exp) == 0) { if (nf_ct_expect_related(rtcp_exp) != 0) nf_ct_unexpect_related(rtp_exp); ... Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp) returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does: spin_lock_bh(&nf_conntrack_lock); if (del_timer(&exp->timeout)) { nf_ct_unlink_expect(exp); nf_ct_expect_put(exp); } spin_unlock_bh(&nf_conntrack_lock); Note that del_timer always returns false if the timer has been initialized. However, the timer was not initialized since setup_timer was not called, therefore, the expectation timer remains in some undefined state. If I'm not missing anything, this may lead to the removal an unexistent expectation. To fix this, the optimization that allows refreshing an expectation is removed. Now nf_conntrack_expect_related looks more consistent to me since it always add the expectation in case that it returns success. Thanks to Patrick McHardy for participating in the discussion of this patch. I think this may be the source of the problem described by: http://marc.info/?l=netfilter-devel&m=134073514719421&w=2 Reported-by: Rafal Fitt Acked-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_expect.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index 45cf602a76bc..527651a53a45 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -361,23 +361,6 @@ static void evict_oldest_expect(struct nf_conn *master, } } -static inline int refresh_timer(struct nf_conntrack_expect *i) -{ - struct nf_conn_help *master_help = nfct_help(i->master); - const struct nf_conntrack_expect_policy *p; - - if (!del_timer(&i->timeout)) - return 0; - - p = &rcu_dereference_protected( - master_help->helper, - lockdep_is_held(&nf_conntrack_lock) - )->expect_policy[i->class]; - i->timeout.expires = jiffies + p->timeout * HZ; - add_timer(&i->timeout); - return 1; -} - static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) { const struct nf_conntrack_expect_policy *p; @@ -386,7 +369,7 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) struct nf_conn_help *master_help = nfct_help(master); struct nf_conntrack_helper *helper; struct net *net = nf_ct_exp_net(expect); - struct hlist_node *n; + struct hlist_node *n, *next; unsigned int h; int ret = 1; @@ -395,12 +378,12 @@ static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect) goto out; } h = nf_ct_expect_dst_hash(&expect->tuple); - hlist_for_each_entry(i, n, &net->ct.expect_hash[h], hnode) { + hlist_for_each_entry_safe(i, n, next, &net->ct.expect_hash[h], hnode) { if (expect_matches(i, expect)) { - /* Refresh timer: if it's dying, ignore.. */ - if (refresh_timer(i)) { - ret = 0; - goto out; + if (del_timer(&i->timeout)) { + nf_ct_unlink_expect(i); + nf_ct_expect_put(i); + break; } } else if (expect_clash(i, expect)) { ret = -EBUSY; From 04f995a544d1289ffb8108849cd71b1325c5af6a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 6 Aug 2012 00:03:28 +0000 Subject: [PATCH 0608/1098] KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code In handling the H_CEDE hypercall, if this vcpu has already been prodded (with the H_PROD hypercall, which Linux guests don't in fact use), we branch to a numeric label '1f'. Unfortunately there is another '1:' label before the one that we want to jump to. This fixes the problem by using a textual label, 'kvm_cede_prodded'. It also changes the label for another longish branch from '2:' to 'kvm_cede_exit' to avoid a possible future problem if code modifications add another numeric '2:' label in between. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d040..44b72feaff7d 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: From 249ba1ee0f8fcb4e40caa5fbea11dafde201cc46 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Fri, 3 Aug 2012 13:56:33 +0200 Subject: [PATCH 0609/1098] KVM: PPC: Add cache flush on page map When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: Alexander Graf --- arch/powerpc/include/asm/kvm_host.h | 1 + arch/powerpc/include/asm/kvm_ppc.h | 12 ++++++++++++ arch/powerpc/kvm/book3s_32_mmu_host.c | 3 +++ arch/powerpc/kvm/book3s_64_mmu_host.c | 2 ++ arch/powerpc/kvm/e500_tlb.c | 3 +++ arch/powerpc/mm/mem.c | 1 + 6 files changed, 22 insertions(+) diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf5..a8bf5c673a3c 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include #include #include +#include #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b9..e006f0bdea95 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb234..837f13e7b6bf 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a8..0688b6b39585 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc961302..fb3bb3ad8b3c 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d135..fbdad0e3929a 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { From e8143ccb6b501f78bb95d9c5ee100d18423008cf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Aug 2012 12:10:09 +0000 Subject: [PATCH 0610/1098] ppc: e500_tlb memset clears nothing Put the parameters the right way around Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44031 Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alexander Graf --- arch/powerpc/kvm/e500_tlb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index fb3bb3ad8b3c..a2b66717813d 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) From 5e68fb3cab23b327e9f15803607e697d7eea1966 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 16 Aug 2012 14:11:09 +0200 Subject: [PATCH 0611/1098] ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx Instead of blindly initializing a volume knob widget, first check that there actually is a volume knob widget. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 94040ccf8e8f..ea5775a1a7db 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4272,7 +4272,8 @@ static int stac92xx_init(struct hda_codec *codec) unsigned int gpio; int i; - snd_hda_sequence_write(codec, spec->init); + if (spec->init) + snd_hda_sequence_write(codec, spec->init); /* power down adcs initially */ if (spec->powerdown_adcs) @@ -5748,7 +5749,6 @@ again: /* fallthru */ case 0x111d76b4: /* 6 Port without Analog Mixer */ case 0x111d76b5: - spec->init = stac92hd71bxx_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; spec->num_dmics = stac92xx_connected_ports(codec, stac92hd71bxx_dmic_nids, @@ -5773,7 +5773,6 @@ again: spec->stream_delay = 40; /* 40 milliseconds */ /* disable VSW */ - spec->init = stac92hd71bxx_core_init; unmute_init++; snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0); snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3); @@ -5788,7 +5787,6 @@ again: /* fallthru */ default: - spec->init = stac92hd71bxx_core_init; codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; spec->num_dmics = stac92xx_connected_ports(codec, stac92hd71bxx_dmic_nids, @@ -5796,6 +5794,9 @@ again: break; } + if (get_wcaps_type(get_wcaps(codec, 0x28)) == AC_WID_VOL_KNB) + spec->init = stac92hd71bxx_core_init; + if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP) snd_hda_sequence_write_cache(codec, unmute_init); From 227f052f4711caf432b9a7dbcfe1a2857d3c0def Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 31 Jul 2012 09:31:11 +0200 Subject: [PATCH 0612/1098] drbd: fix drbd wire compatibility for empty flushes DRBD has a concept of request epochs or reorder-domains, which are separated on the wire by P_BARRIER packets. Older DRBD is not able to handle zero-sized requests at all, so we need to map empty flushes to these drbd barriers. These are the equivalent of empty flushes, and by default trigger flushes on the receiving side anyways (unless not supported or explicitly disabled), so there is no need to handle this differently in newer drbd either. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_req.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 910335c30927..0bb1e41f136f 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -834,7 +834,15 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns req->private_bio = NULL; } if (rw == WRITE) { - remote = 1; + /* Need to replicate writes. Unless it is an empty flush, + * which is better mapped to a DRBD P_BARRIER packet, + * also for drbd wire protocol compatibility reasons. */ + if (unlikely(size == 0)) { + /* The only size==0 bios we expect are empty flushes. */ + D_ASSERT(bio->bi_rw & REQ_FLUSH); + remote = 0; + } else + remote = 1; } else { /* READ || READA */ if (local) { @@ -870,8 +878,11 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns * extent. This waits for any resync activity in the corresponding * resync extent to finish, and, if necessary, pulls in the target * extent into the activity log, which involves further disk io because - * of transactional on-disk meta data updates. */ - if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) { + * of transactional on-disk meta data updates. + * Empty flushes don't need to go into the activity log, they can only + * flush data for pending writes which are already in there. */ + if (rw == WRITE && local && size + && !test_bit(AL_SUSPENDED, &mdev->flags)) { req->rq_state |= RQ_IN_ACT_LOG; drbd_al_begin_io(mdev, sector); } @@ -994,7 +1005,10 @@ allocate_barrier: if (rw == WRITE && _req_conflicts(req)) goto fail_conflicting; - list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); + /* no point in adding empty flushes to the transfer log, + * they are mapped to drbd barriers already. */ + if (likely(size!=0)) + list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); /* NOTE remote first: to get the concurrent write detection right, * we must register the request before start of local IO. */ @@ -1014,6 +1028,14 @@ allocate_barrier: mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) maybe_pull_ahead(mdev); + /* If this was a flush, queue a drbd barrier/start a new epoch. + * Unless the current epoch was empty anyways, or we are not currently + * replicating, in which case there is no point. */ + if (unlikely(bio->bi_rw & REQ_FLUSH) + && mdev->newest_tle->n_writes + && drbd_should_do_remote(mdev->state)) + queue_barrier(mdev); + spin_unlock_irq(&mdev->req_lock); kfree(b); /* if someone else has beaten us to it... */ From 509fc019e534bdf5f3969d78c53184db4cf7ff48 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 31 Jul 2012 11:22:58 +0200 Subject: [PATCH 0613/1098] drbd: Finish requests that completed while IO was frozen Requests of an acked epoch are stored on the barrier_acked_requests list. In case the private bio of such a request completes while IO on the drbd device is suspended [req_mod(completed_ok)] then the request stays there. When thawing IO because the fence_peer handler returned, then we use tl_clear() to apply the connection_lost_while_pending event to all requests on the transfer-log and the barrier_acked_requests list. Up to now the connection_lost_while_pending event was not applied on requests on the barrier_acked_requests list. Fixed that. I.e. now the connection_lost_while_pending and resend events are applied to requests on the barrier_acked_requests list. For that it is necessary that the resend event finishes (local only) READS correctly. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_main.c | 28 ++++++++++++---------------- drivers/block/drbd/drbd_req.c | 6 ++++++ 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 2e0e7fc1dbba..136db95b212d 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -79,6 +79,7 @@ static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused); static void md_sync_timer_fn(unsigned long data); static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused); static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused); +static void _tl_clear(struct drbd_conf *mdev); MODULE_AUTHOR("Philipp Reisner , " "Lars Ellenberg "); @@ -432,19 +433,10 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) /* Actions operating on the disk state, also want to work on requests that got barrier acked. */ - switch (what) { - case fail_frozen_disk_io: - case restart_frozen_disk_io: - list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { - req = list_entry(le, struct drbd_request, tl_requests); - _req_mod(req, what); - } - case connection_lost_while_pending: - case resend: - break; - default: - dev_err(DEV, "what = %d in _tl_restart()\n", what); + list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { + req = list_entry(le, struct drbd_request, tl_requests); + _req_mod(req, what); } } @@ -458,12 +450,17 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) * receiver thread and the worker thread. */ void tl_clear(struct drbd_conf *mdev) +{ + spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); + spin_unlock_irq(&mdev->req_lock); +} + +static void _tl_clear(struct drbd_conf *mdev) { struct list_head *le, *tle; struct drbd_request *r; - spin_lock_irq(&mdev->req_lock); - _tl_restart(mdev, connection_lost_while_pending); /* we expect this list to be empty. */ @@ -482,7 +479,6 @@ void tl_clear(struct drbd_conf *mdev) memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *)); - spin_unlock_irq(&mdev->req_lock); } void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) @@ -1476,12 +1472,12 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (ns.susp_fen) { /* case1: The outdate peer handler is successful: */ if (os.pdsk > D_OUTDATED && ns.pdsk <= D_OUTDATED) { - tl_clear(mdev); if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); } spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); _drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL); spin_unlock_irq(&mdev->req_lock); } diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 0bb1e41f136f..01b2ac641c7b 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -695,6 +695,12 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, break; case resend: + /* Simply complete (local only) READs. */ + if (!(req->rq_state & RQ_WRITE) && !req->w.cb) { + _req_may_be_done(req, m); + break; + } + /* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK before the connection loss (B&C only); only P_BARRIER_ACK was missing. Trowing them out of the TL here by pretending we got a BARRIER_ACK From d1aa4d04da8de5c89d73859e077d89c4c71d8ed1 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Wed, 8 Aug 2012 21:19:09 +0200 Subject: [PATCH 0614/1098] drbd: Write all pages of the bitmap after an online resize We need to write the whole bitmap after we moved the meta data due to an online resize operation. With the support for one peta byte devices bitmap IO was optimized to only write out touched pages. This optimization must be turned off when writing the bitmap after an online resize. This issue was introduced with drbd-8.3.10. The impact of this bug is that after an online resize, the next resync could become larger than expected. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- drivers/block/drbd/drbd_bitmap.c | 15 ++++++++++++++- drivers/block/drbd/drbd_int.h | 1 + drivers/block/drbd/drbd_nl.c | 4 ++-- 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index ba91b408abad..d84566496746 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -889,6 +889,7 @@ struct bm_aio_ctx { unsigned int done; unsigned flags; #define BM_AIO_COPY_PAGES 1 +#define BM_WRITE_ALL_PAGES 2 int error; struct kref kref; }; @@ -1059,7 +1060,8 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w if (lazy_writeout_upper_idx && i == lazy_writeout_upper_idx) break; if (rw & WRITE) { - if (bm_test_page_unchanged(b->bm_pages[i])) { + if (!(flags & BM_WRITE_ALL_PAGES) && + bm_test_page_unchanged(b->bm_pages[i])) { dynamic_dev_dbg(DEV, "skipped bm write for idx %u\n", i); continue; } @@ -1140,6 +1142,17 @@ int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local) return bm_rw(mdev, WRITE, 0, 0); } +/** + * drbd_bm_write_all() - Write the whole bitmap to its on disk location. + * @mdev: DRBD device. + * + * Will write all pages. + */ +int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local) +{ + return bm_rw(mdev, WRITE, BM_WRITE_ALL_PAGES, 0); +} + /** * drbd_bm_lazy_write_out() - Write bitmap pages 0 to @upper_idx-1, if they have changed. * @mdev: DRBD device. diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index b2ca143d0053..b953cc7c9c00 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1469,6 +1469,7 @@ extern int drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr); extern int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(local); extern int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local); +extern int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write_copy_pages(struct drbd_conf *mdev) __must_hold(local); extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev, unsigned long al_enr); diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index fb9dce8daa24..edb490aad8b4 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -674,8 +674,8 @@ enum determine_dev_size drbd_determine_dev_size(struct drbd_conf *mdev, enum dds la_size_changed && md_moved ? "size changed and md moved" : la_size_changed ? "size changed" : "md moved"); /* next line implicitly does drbd_suspend_io()+drbd_resume_io() */ - err = drbd_bitmap_io(mdev, &drbd_bm_write, - "size changed", BM_LOCKED_MASK); + err = drbd_bitmap_io(mdev, md_moved ? &drbd_bm_write_all : &drbd_bm_write, + "size changed", BM_LOCKED_MASK); if (err) { rv = dev_size_error; goto out; From a0675a386a3a68f71e831bd064082e6717b45fdc Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 10 Aug 2012 18:25:34 +0000 Subject: [PATCH 0615/1098] IB/mlx4: Check iboe netdev pointer before dereferencing it Unlike other parts of the mlx4_ib code, the function build_mlx_header() doesn't check if the iboe netdev of the given port is valid before dereferencing it, which can cause a crash if the ethernet interface has already been taken down. Fix this by checking for a valid netdev pointer before using it to get the port MAC address. Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index a6d8ea060ea8..f585eddef4b7 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1407,6 +1407,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, struct mlx4_wqe_mlx_seg *mlx = wqe; struct mlx4_wqe_inline_seg *inl = wqe + sizeof *mlx; struct mlx4_ib_ah *ah = to_mah(wr->wr.ud.ah); + struct net_device *ndev; union ib_gid sgid; u16 pkey; int send_size; @@ -1483,7 +1484,10 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, memcpy(sqp->ud_header.eth.dmac_h, ah->av.eth.mac, 6); /* FIXME: cache smac value? */ - smac = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]->dev_addr; + ndev = to_mdev(sqp->qp.ibqp.device)->iboe.netdevs[sqp->qp.port - 1]; + if (!ndev) + return -ENODEV; + smac = ndev->dev_addr; memcpy(sqp->ud_header.eth.smac_h, smac, 6); if (!memcmp(sqp->ud_header.eth.smac_h, sqp->ud_header.eth.dmac_h, 6)) mlx->flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK); From 3e8309551777e2a54367daddb65b53e236754374 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 16 Aug 2012 16:25:33 +0300 Subject: [PATCH 0616/1098] mei: fix device stall after wd is stopped After watchdog was disabled the driver would stall due to wrong calculation of credits reduction The cat&paste bug was introduced in the commit 7bdf72d3d8059a50214069ea4b87c2174645f40f mei: introduce mei_data2slots wrapper Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/interrupt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index c6ffbbe5a6c0..d78c05e693f7 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -1253,7 +1253,7 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list, if (dev->wd_timeout) *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); else - *slots -= mei_data2slots(MEI_START_WD_DATA_SIZE); + *slots -= mei_data2slots(MEI_WD_PARAMS_SIZE); } } if (dev->stop) From 731879f8e3d4c61220462160311fa650a8b96abf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 23 Jul 2012 14:26:07 -0500 Subject: [PATCH 0617/1098] USB: qcserial: fix port handling on Gobi 1K and 2K+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bjorn's latest patchset does break Gobi 1K and 2K because on both devices as it claims usb interface 0. That's because usbif 0 is not handled in the switch statement, and thus the if0 gets claimed when it should not. So let's just make things even simpler yet, and handle both the 1K and 2K+ cases separately. This patch should not affect the new Sierra device support, because those devices are matched via interface-specific matching and thus should never hit the composite code. Signed-off-by: Dan Williams Tested-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 42 ++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 314ae8ceba41..bfd50779f0c9 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -199,43 +199,49 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* default to enabling interface */ altsetting = 0; - switch (ifnum) { - /* Composite mode; don't bind to the QMI/net interface as that - * gets handled by other drivers. - */ + /* Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + if (is_gobi1k) { /* Gobi 1K USB layout: * 0: serial port (doesn't respond) * 1: serial port (doesn't respond) * 2: AT-capable modem port * 3: QMI/net - * - * Gobi 2K+ USB layout: + */ + if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + } else { + /* Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port * 3: NMEA */ - - case 1: - if (is_gobi1k) + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ altsetting = -1; - else + break; + case 1: dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); - break; - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 3: - if (is_gobi1k) - altsetting = -1; - else + break; + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 3: /* * NMEA (serial line 9600 8N1) * # echo "\$GPS_START" > /dev/ttyUSBx * # echo "\$GPS_STOP" > /dev/ttyUSBx */ dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); + break; + } } done: From ca08649eb5dd30f11a5a8fe8659b48899b7ea6a1 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Aug 2012 11:31:27 -0400 Subject: [PATCH 0618/1098] Revert "xen PVonHVM: move shared_info to MMIO before kexec" This reverts commit 00e37bdb0113a98408de42db85be002f21dbffd3. During shutdown of PVHVM guests with more than 2VCPUs on certain machines we can hit the race where the replaced shared_info is not replaced fast enough and the PV time clock retries reading the same area over and over without any any success and is stuck in an infinite loop. Acked-by: Olaf Hering Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 118 ++++--------------------------------- arch/x86/xen/suspend.c | 2 +- arch/x86/xen/xen-ops.h | 2 +- drivers/xen/platform-pci.c | 15 ----- include/xen/events.h | 2 - 5 files changed, 13 insertions(+), 126 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a6f8acbdfc9a..f1814fc2cb77 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include @@ -1472,130 +1471,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1646,9 +1553,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c39de4..45329c8c226e 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e04e0f..202d4c150154 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index d4c50d63acbc..97ca359ae2bd 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -101,19 +101,6 @@ static int platform_pci_resume(struct pci_dev *pdev) return 0; } -static void __devinit prepare_shared_info(void) -{ -#ifdef CONFIG_KEXEC - unsigned long addr; - struct shared_info *hvm_shared_info; - - addr = alloc_xen_mmio(PAGE_SIZE); - hvm_shared_info = ioremap(addr, PAGE_SIZE); - memset(hvm_shared_info, 0, PAGE_SIZE); - xen_hvm_prepare_kexec(hvm_shared_info, addr >> PAGE_SHIFT); -#endif -} - static int __devinit platform_pci_init(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -151,8 +138,6 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, platform_mmio = mmio_addr; platform_mmiolen = mmio_len; - prepare_shared_info(); - if (!xen_have_vector_callback) { ret = xen_allocate_irq(pdev); if (ret) { diff --git a/include/xen/events.h b/include/xen/events.h index 9c641deb65d2..04399b28e821 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -58,8 +58,6 @@ void notify_remote_via_irq(int irq); void xen_irq_resume(void); -void xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn); - /* Clear an irq's pending state, in preparation for polling on it */ void xen_clear_irq_pending(int irq); void xen_set_irq_pending(int irq); From af7f2158fdee9d7f55b793b09f8170a3391f889a Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Thu, 19 Jul 2012 13:46:21 -0600 Subject: [PATCH 0619/1098] drivers-core: make structured logging play nice with dynamic-debug commit c4e00daaa96d3a0786f1f4fe6456281c60ef9a16 changed __dev_printk in a way that broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..), but not dev_dbg(NULL,..) or pr_debug(..), which is why it wasnt noticed sooner. When dev==NULL, __dev_printk() just calls printk(), which just works. But otherwise, it assumed that level was always a string like "" and just plucked out the 'L', ignoring the rest. However, dynamic_emit_prefix() adds "[tid] module:func:line:" to the string, those additions all got lost. Signed-off-by: Jim Cromie Acked-by: Jason Baron Cc: stable Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index f338037a4f3d..cdd01c52c629 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1865,6 +1865,7 @@ int __dev_printk(const char *level, const struct device *dev, struct va_format *vaf) { char dict[128]; + const char *level_extra = ""; size_t dictlen = 0; const char *subsys; @@ -1911,10 +1912,14 @@ int __dev_printk(const char *level, const struct device *dev, "DEVICE=+%s:%s", subsys, dev_name(dev)); } skip: + if (level[3]) + level_extra = &level[3]; /* skip past "" */ + return printk_emit(0, level[1] - '0', dictlen ? dict : NULL, dictlen, - "%s %s: %pV", - dev_driver_string(dev), dev_name(dev), vaf); + "%s %s: %s%pV", + dev_driver_string(dev), dev_name(dev), + level_extra, vaf); } EXPORT_SYMBOL(__dev_printk); From 7b7e995d69199b555181ac057c47b017c510a129 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 24 Jul 2012 09:26:57 +0800 Subject: [PATCH 0620/1098] extcon: extcon_gpio: Replace gpio_request_one by devm_gpio_request_one commit 01eaf24 "extcon: Convert extcon_gpio to devm_gpio_request_one" missed the replacement for devm_gpio_request_one. fix it. Signed-off-by: Axel Lin Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman --- drivers/extcon/extcon_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c index fe3db45fa83c..3cc152e690b0 100644 --- a/drivers/extcon/extcon_gpio.c +++ b/drivers/extcon/extcon_gpio.c @@ -107,7 +107,8 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev) if (ret < 0) return ret; - ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name); + ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN, + pdev->name); if (ret < 0) goto err; From 62b2ce964bb901f00a480104bd35a2e1f8d2cf58 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 15 Aug 2012 13:30:12 -0700 Subject: [PATCH 0621/1098] vfs: fix propagation of atomic_open create error on negative dentry If ->atomic_open() returns -ENOENT, we take care to return the create error (e.g., EACCES), if any. Do the same when ->atomic_open() returns 1 and provides a negative dentry. This fixes a regression where an unprivileged open O_CREAT fails with ENOENT instead of EACCES, introduced with the new atomic_open code. It is tested by the open/08.t test in the pjd posix test suite, and was observed on top of fuse (backed by ceph-fuse). Signed-off-by: Sage Weil Signed-off-by: Miklos Szeredi --- fs/namei.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index 26c28ec4f4af..db76b866a097 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2489,6 +2489,10 @@ static int atomic_open(struct nameidata *nd, struct dentry *dentry, dput(dentry); dentry = file->f_path.dentry; } + if (create_error && dentry->d_inode == NULL) { + error = create_error; + goto out; + } goto looked_up; } From a2f6985332d2564e443d9d889ce70f39b3293d09 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 6 Aug 2012 15:23:55 +0300 Subject: [PATCH 0622/1098] mei: add mei_quirk_probe function The main purpose of this function is to exclude ME devices without support for MEI/HECI interface from binding Currently affected systems are C600/X79 based servers that expose PCI device even though it doesn't supported ME Interface. MEI driver accessing such nonfunctional device can corrupt the system. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 092330208869..7422c7652845 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -924,6 +924,27 @@ static struct miscdevice mei_misc_device = { .minor = MISC_DYNAMIC_MINOR, }; +/** + * mei_quirk_probe - probe for devices that doesn't valid ME interface + * @pdev: PCI device structure + * @ent: entry into pci_device_table + * + * returns true if ME Interface is valid, false otherwise + */ +static bool __devinit mei_quirk_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u32 reg; + if (ent->device == MEI_DEV_ID_PBG_1) { + pci_read_config_dword(pdev, 0x48, ®); + /* make sure that bit 9 is up and bit 10 is down */ + if ((reg & 0x600) == 0x200) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + } + return true; +} /** * mei_probe - Device Initialization Routine * @@ -939,6 +960,12 @@ static int __devinit mei_probe(struct pci_dev *pdev, int err; mutex_lock(&mei_mutex); + + if (!mei_quirk_probe(pdev, ent)) { + err = -ENODEV; + goto end; + } + if (mei_device) { err = -EEXIST; goto end; From 2a95e37c128d1c12b3cb0eb6dfdc1739a7104cd8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 15 Aug 2012 13:00:51 +0200 Subject: [PATCH 0623/1098] scripts/decodecode: Fixup trapping instruction marker When dumping "Code: " sections from an oops, the trapping instruction %rip points to can be a string copy 2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi) and the line contain a bunch of ":". Current "cut" selects only the and the second field output looks funnily overlaid this: 2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi Fix this by selecting the remaining fields too. Cc: Andrew Morton Cc: Linus Torvalds Cc: linux-kbuild@vger.kernel.org Signed-off-by: Borislav Petkov Signed-off-by: Linus Torvalds --- scripts/decodecode | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/decodecode b/scripts/decodecode index 18ba881c3415..4f8248d5a11f 100755 --- a/scripts/decodecode +++ b/scripts/decodecode @@ -89,7 +89,7 @@ echo $code >> $T.s disas $T cat $T.dis >> $T.aa -faultline=`cat $T.dis | head -1 | cut -d":" -f2` +faultline=`cat $T.dis | head -1 | cut -d":" -f2-` faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'` cat $T.oo | sed -e "s/\($faultline\)/\*\1 <-- trapping instruction/g" From a1d95cfc07d637e024027101a691dad5b0eef27a Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:19:11 -0600 Subject: [PATCH 0624/1098] staging: comedi: usbduxsigma: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: Bernd Porr Cc: Dan Carpenter Cc: H Hartley Sweeten Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxsigma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index 543e604791e2..f54ab8c2fcfd 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -63,6 +63,7 @@ Status: testing #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbduxsigma_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2780,7 +2781,7 @@ static int usbduxsigma_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxsigma_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2845,3 +2846,4 @@ module_comedi_usb_driver(usbduxsigma_driver, usbduxsigma_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); From 1e1ccc3ad6ebe720e14dd9787f6b5cebaf46f573 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:15:37 -0600 Subject: [PATCH 0625/1098] staging: comedi: usbdux: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: H Hartley Sweeten Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 848c7ec06976..11ee83681da7 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -102,6 +102,7 @@ sampling rate. If you sample two channels you get 4kHz and so on. #define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ +#define FIRMWARE "usbdux_firmware.bin" #define USBDUXSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -2791,7 +2792,7 @@ static int usbdux_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbdux_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxsub + index, @@ -2850,3 +2851,4 @@ module_comedi_usb_driver(usbdux_driver, usbdux_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); From e74f7fc5d85c5c0bedb69913e2a10774ddb6f367 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 16 Aug 2012 11:09:28 -0600 Subject: [PATCH 0626/1098] staging: comedi: usbduxfast: Declare MODULE_FIRMWARE usage Cc: Ian Abbott Cc: Mori Hess Cc: H Hartley Sweeten Cc: Ravishankar Karkala Mallikarjunayya Signed-off-by: Tim Gardner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxfast.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index d9911588c10a..8eb41257c6ce 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -57,6 +57,7 @@ /* * constants for "firmware" upload and download */ +#define FIRMWARE "usbduxfast_firmware.bin" #define USBDUXFASTSUB_FIRMWARE 0xA0 #define VENDOR_DIR_IN 0xC0 #define VENDOR_DIR_OUT 0x40 @@ -1706,7 +1707,7 @@ static int usbduxfast_usb_probe(struct usb_interface *uinterf, ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, - "usbduxfast_firmware.bin", + FIRMWARE, &udev->dev, GFP_KERNEL, usbduxfastsub + index, @@ -1774,3 +1775,4 @@ module_comedi_usb_driver(usbduxfast_driver, usbduxfast_usb_driver); MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); MODULE_DESCRIPTION("USB-DUXfast, BerndPorr@f2s.com"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(FIRMWARE); From 1dd8372d350583b0acc8d7cfd7a1dee05e1942dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 15 Aug 2012 19:20:02 -0700 Subject: [PATCH 0627/1098] MAINTAINERS: update address for Dan Williams Moved to djbw@fb.com Cc: Dave Jiang Cc: Vinod Koul Signed-off-by: Dan Williams Signed-off-by: Linus Torvalds --- MAINTAINERS | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f87589075552..61ad79ea2b08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -827,24 +827,24 @@ F: arch/arm/mach-pxa/colibri-pxa270-income.c ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IOP33X ARM ARCHITECTURE -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IOP13XX ARM ARCHITECTURE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IQ81342EX MACHINE SUPPORT M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -869,7 +869,7 @@ F: drivers/pcmcia/pxa2xx_stargate2.c ARM/INTEL XSC3 (MANZANO) ARM CORE M: Lennert Buytenhek -M: Dan Williams +M: Dan Williams L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -1232,9 +1232,9 @@ S: Maintained F: drivers/hwmon/asb100.c ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API -M: Dan Williams +M: Dan Williams W: http://sourceforge.net/projects/xscaleiop -S: Supported +S: Maintained F: Documentation/crypto/async-tx-api.txt F: crypto/async_tx/ F: drivers/dma/ @@ -2364,7 +2364,7 @@ T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git DMA GENERIC OFFLOAD ENGINE SUBSYSTEM M: Vinod Koul -M: Dan Williams +M: Dan Williams S: Supported F: drivers/dma/ F: include/linux/dma* @@ -3552,7 +3552,6 @@ K: \b(ABS|SYN)_MT_ INTEL C600 SERIES SAS CONTROLLER DRIVER M: Intel SCU Linux support -M: Dan Williams M: Dave Jiang M: Ed Nadolski L: linux-scsi@vger.kernel.org @@ -3595,8 +3594,8 @@ F: arch/x86/kernel/microcode_core.c F: arch/x86/kernel/microcode_intel.c INTEL I/OAT DMA DRIVER -M: Dan Williams -S: Supported +M: Dan Williams +S: Maintained F: drivers/dma/ioat* INTEL IOMMU (VT-d) @@ -3608,8 +3607,8 @@ F: drivers/iommu/intel-iommu.c F: include/linux/intel-iommu.h INTEL IOP-ADMA DMA DRIVER -M: Dan Williams -S: Maintained +M: Dan Williams +S: Odd fixes F: drivers/dma/iop-adma.c INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT From a45440f05e9ebc26f2a375df911823fdef5b5281 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Mon, 6 Aug 2012 09:37:47 +0800 Subject: [PATCH 0628/1098] autofs4 - fix get_next_positive_subdir() Following a report of a crash during an automount expire I found that the locking in fs/autofs4/expire.c:get_next_positive_subdir() was wrong. Not only is the locking wrong but the function is more complex than it needs to be. The function is meant to calculate (and dget) the next entry in the list of directories contained in the root of an autofs mount point (an autofs indirect mount to be precise). The main problem was that the d_lock of the owner of the list was not being taken when walking the list, which lead to list corruption under load. The only other lock that needs to be taken is against the next dentry candidate so it can be checked for usability. Signed-off-by: Ian Kent Signed-off-by: Linus Torvalds --- fs/autofs4/expire.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-) diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 1feb68ecef95..8c0e56d92938 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -94,25 +94,21 @@ static struct dentry *get_next_positive_subdir(struct dentry *prev, { struct autofs_sb_info *sbi = autofs4_sbi(root->d_sb); struct list_head *next; - struct dentry *p, *q; + struct dentry *q; spin_lock(&sbi->lookup_lock); + spin_lock(&root->d_lock); - if (prev == NULL) { - spin_lock(&root->d_lock); + if (prev) + next = prev->d_u.d_child.next; + else { prev = dget_dlock(root); next = prev->d_subdirs.next; - p = prev; - goto start; } - p = prev; - spin_lock(&p->d_lock); -again: - next = p->d_u.d_child.next; -start: +cont: if (next == &root->d_subdirs) { - spin_unlock(&p->d_lock); + spin_unlock(&root->d_lock); spin_unlock(&sbi->lookup_lock); dput(prev); return NULL; @@ -121,16 +117,15 @@ start: q = list_entry(next, struct dentry, d_u.d_child); spin_lock_nested(&q->d_lock, DENTRY_D_LOCK_NESTED); - /* Negative dentry - try next */ - if (!simple_positive(q)) { - spin_unlock(&p->d_lock); - lock_set_subclass(&q->d_lock.dep_map, 0, _RET_IP_); - p = q; - goto again; + /* Already gone or negative dentry (under construction) - try next */ + if (q->d_count == 0 || !simple_positive(q)) { + spin_unlock(&q->d_lock); + next = q->d_u.d_child.next; + goto cont; } dget_dlock(q); spin_unlock(&q->d_lock); - spin_unlock(&p->d_lock); + spin_unlock(&root->d_lock); spin_unlock(&sbi->lookup_lock); dput(prev); From 00592021010ad86d3b26bac7034034f6af145a2c Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 8 Aug 2012 10:37:59 +0800 Subject: [PATCH 0629/1098] serial: mxs-auart: fix the wrong RTS hardware flow control Without checking if the auart supports the hardware flow control or not, the old mxs_auart_set_mctrl() asserted the RTS pin blindly. This will causes the auart receives wrong data in the following case: The far-end has already started the write operation, and wait for the auart asserts the RTS pin. Then the auart starts the read operation, but mxs_auart_set_mctrl() may be called before we set the RTSCTS in the mxs_auart_settermios(). So the RTS pin is asserted in a wrong situation, and we get the wrong data in the end. This bug has been catched when I connect the mx23(DTE) to the mx53(DCE). This patch also replaces the AUART_CTRL2_RTS with AUART_CTRL2_RTSEN. We should use the real the hardware flow control, not the software-controled hardware flow control. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 2e341b81ff89..3a667eed63d6 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -73,6 +73,7 @@ #define AUART_CTRL0_CLKGATE (1 << 30) #define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTSEN (1 << 14) #define AUART_CTRL2_RTS (1 << 11) #define AUART_CTRL2_RXE (1 << 9) #define AUART_CTRL2_TXE (1 << 8) @@ -259,9 +260,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTS; - if (mctrl & TIOCM_RTS) - ctrl |= AUART_CTRL2_RTS; + ctrl &= ~AUART_CTRL2_RTSEN; + if (mctrl & TIOCM_RTS) { + if (u->state->port.flags & ASYNC_CTS_FLOW) + ctrl |= AUART_CTRL2_RTSEN; + } + s->ctrl = mctrl; writel(ctrl, u->membase + AUART_CTRL2); } @@ -359,9 +363,9 @@ static void mxs_auart_settermios(struct uart_port *u, /* figure out the hardware flow control settings */ if (cflag & CRTSCTS) - ctrl2 |= AUART_CTRL2_CTSEN; + ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; else - ctrl2 &= ~AUART_CTRL2_CTSEN; + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); /* set baud rate */ baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); From 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Sun, 12 Aug 2012 07:16:43 -0500 Subject: [PATCH 0630/1098] pmac_zilog,kdb: Fix console poll hook to return instead of loop kdb <-> kgdb transitioning does not work properly with this UART driver because the get character routine loops indefinitely as opposed to returning NO_POLL_CHAR per the expectation of the KDB I/O driver API. The symptom is a kernel hang when trying to switch debug modes. Cc: Alan Cox Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 654755a990df..333c8d012b0e 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) static int pmz_poll_get_char(struct uart_port *port) { struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + int tries = 2; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); + while (tries) { + if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0) + return read_zsdata(uap); + if (tries--) + udelay(5); + } + + return NO_POLL_CHAR; } static void pmz_poll_put_char(struct uart_port *port, unsigned char c) From dfffd0d65fdf16d034681716dcbea74776f62e40 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 16 Jul 2012 09:42:00 +0100 Subject: [PATCH 0631/1098] iio: staging: ad7298_ring: Fix maybe-uninitialized warning drivers/staging/iio/adc/ad7298_ring.c:97:37: warning: 'time_ns' may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: Fengguang Wu Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7298_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c index fd1d855ff57a..506016f01593 100644 --- a/drivers/staging/iio/adc/ad7298_ring.c +++ b/drivers/staging/iio/adc/ad7298_ring.c @@ -76,7 +76,7 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct ad7298_state *st = iio_priv(indio_dev); struct iio_buffer *ring = indio_dev->buffer; - s64 time_ns; + s64 time_ns = 0; __u16 buf[16]; int b_sent, i; From 8857df3aceb7a8eb7558059b7da109e41dd1fb95 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 20 Jul 2012 09:31:00 +0100 Subject: [PATCH 0632/1098] iio: frequency: ADF4350: Fix potential reference div factor overflow. With small channel spacing values and high reference frequencies it is possible to exceed the range of the 10-bit counter. Workaround by checking the range and widening some constrains. We don't use the REG1_PHASE value in this case the datasheet recommends to set it to 1 if not used. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 24 +++++++++++++++--------- include/linux/iio/frequency/adf4350.h | 2 ++ 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index 59fbb3ae40e7..e35bb8f6fe75 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -129,7 +129,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) { struct adf4350_platform_data *pdata = st->pdata; u64 tmp; - u32 div_gcd, prescaler; + u32 div_gcd, prescaler, chspc; u16 mdiv, r_cnt = 0; u8 band_sel_div; @@ -158,14 +158,20 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) if (pdata->ref_div_factor) r_cnt = pdata->ref_div_factor - 1; - do { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); + chspc = st->chspc; - st->r1_mod = st->fpfd / st->chspc; - while (st->r1_mod > ADF4350_MAX_MODULUS) { - r_cnt = adf4350_tune_r_cnt(st, r_cnt); - st->r1_mod = st->fpfd / st->chspc; - } + do { + do { + do { + r_cnt = adf4350_tune_r_cnt(st, r_cnt); + st->r1_mod = st->fpfd / chspc; + if (r_cnt > ADF4350_MAX_R_CNT) { + /* try higher spacing values */ + chspc++; + r_cnt = 0; + } + } while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt); + } while (r_cnt == 0); tmp = freq * (u64)st->r1_mod + (st->fpfd > 1); do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */ @@ -194,7 +200,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) st->regs[ADF4350_REG0] = ADF4350_REG0_INT(st->r0_int) | ADF4350_REG0_FRACT(st->r0_fract); - st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(0) | + st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(1) | ADF4350_REG1_MOD(st->r1_mod) | prescaler; diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h index b76b4a87065e..be91f344d5fc 100644 --- a/include/linux/iio/frequency/adf4350.h +++ b/include/linux/iio/frequency/adf4350.h @@ -87,6 +87,8 @@ #define ADF4350_MAX_BANDSEL_CLK 125000 /* Hz */ #define ADF4350_MAX_FREQ_REFIN 250000000 /* Hz */ #define ADF4350_MAX_MODULUS 4095 +#define ADF4350_MAX_R_CNT 1023 + /** * struct adf4350_platform_data - platform specific information From 1c795ebd00042b3a5c97e049fd1c08763714a7a8 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 10:58:00 +0100 Subject: [PATCH 0633/1098] iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode() Do not leak memory by updating pointer with potentially NULL realloc return value. There is no need to preserve data in the buffer, so replace krealloc() by kfree()-kmalloc() pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Peter Meerwald Signed-off-by: Jonathan Cameron --- drivers/iio/light/adjd_s311.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c index 1cbb449b319a..9a99f43094f0 100644 --- a/drivers/iio/light/adjd_s311.c +++ b/drivers/iio/light/adjd_s311.c @@ -271,9 +271,10 @@ static int adjd_s311_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { struct adjd_s311_data *data = iio_priv(indio_dev); - data->buffer = krealloc(data->buffer, indio_dev->scan_bytes, - GFP_KERNEL); - if (!data->buffer) + + kfree(data->buffer); + data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (data->buffer == NULL) return -ENOMEM; return 0; From 421afe5805cbeda35097dc2ea36b9f6f077b4858 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0634/1098] staging:iio:ad7793: Add missing break in switch statement Without the break statement we fall right through to the default case and return an error value. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 76fdd7145fc5..1d0cd09be86e 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -676,7 +676,7 @@ static int ad7793_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } From e83539092c390c95e30b0d9e434709f195340f80 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0635/1098] staging:iio:ad7793: Mark channels as unsigned The values reported by the AD7793 are unsigned. In uniploar mode: 0x000000 is zeroscale 0xffffff is fullscale In bipolar mode: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale In bipolar mode there is a binary offset, but the values are still unsigned. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 1d0cd09be86e..5e457a4b4232 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -722,7 +722,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -734,7 +734,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -746,7 +746,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -759,7 +759,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 24, 32, 0) + .scan_type = IIO_ST('u', 24, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -769,7 +769,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -780,7 +780,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 24, 32, 0), + .scan_type = IIO_ST('u', 24, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, @@ -795,7 +795,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 0, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[1] = { .type = IIO_VOLTAGE, @@ -807,7 +807,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 1, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[2] = { .type = IIO_VOLTAGE, @@ -819,7 +819,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 2, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[3] = { .type = IIO_VOLTAGE, @@ -832,7 +832,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT, .scan_index = 3, - .scan_type = IIO_ST('s', 16, 32, 0) + .scan_type = IIO_ST('u', 16, 32, 0) }, .channel[4] = { .type = IIO_TEMP, @@ -842,7 +842,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 4, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[5] = { .type = IIO_VOLTAGE, @@ -853,7 +853,7 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, .scan_index = 5, - .scan_type = IIO_ST('s', 16, 32, 0), + .scan_type = IIO_ST('u', 16, 32, 0), }, .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), }, From 680f8ea0e85c5c3a7283be99435d6461e8725348 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0636/1098] staging:iio:ad7793: Report channel offset In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number of bits) on the reported value. Currently this value is subtracted when doing a manual read. While this works for manual channel readings it does not work for buffered mode. So report the offset in the channels offset property, which will work in both modes. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 39 +++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 5e457a4b4232..56014a8b6876 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -604,9 +604,6 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); - return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -639,6 +636,12 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, *val = scale_uv; return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + return IIO_VAL_INT; } return -EINVAL; } @@ -720,7 +723,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -732,7 +736,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -744,7 +749,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -757,7 +763,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 24, 32, 0) }, @@ -778,7 +785,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 24, 32, 0), }, @@ -793,7 +801,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 0, .address = AD7793_CH_AIN1P_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 0, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -805,7 +814,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 1, .address = AD7793_CH_AIN2P_AIN2M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 1, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -817,7 +827,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN3P_AIN3M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 2, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -830,7 +841,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel2 = 2, .address = AD7793_CH_AIN1M_AIN1M, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 3, .scan_type = IIO_ST('u', 16, 32, 0) }, @@ -851,7 +863,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { .channel = 4, .address = AD7793_CH_AVDD_MONITOR, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_index = 5, .scan_type = IIO_ST('u', 16, 32, 0), }, From 2a9e0662f6779d2074ecaa80ea5753d5f0cf1b93 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0637/1098] staging:iio:ad7793: Fix temperature scale and offset The temperature channel uses the internal 1.17V reference with 0.81 mv/C. The reported temperature is in Kevlin, so we need to add the Kelvin to Celcius offset when reporting the offset for the temperature channel. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 56014a8b6876..3c8d1d4c6192 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -617,30 +617,37 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_NANO; } else { /* 1170mV / 2^23 * 6 */ - scale_uv = (1170ULL * 100000000ULL * 6ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + scale_uv = (1170ULL * 100000000ULL * 6ULL); } break; case IIO_TEMP: - /* Always uses unity gain and internal ref */ - scale_uv = (2500ULL * 100000000ULL) - >> (chan->scan_type.realbits - - (unipolar ? 0 : 1)); + /* 1170mV / 0.81 mV/C / 2^23 */ + scale_uv = 1444444444444ULL; break; default: return -EINVAL; } - *val2 = do_div(scale_uv, 100000000) * 10; - *val = scale_uv; - + scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1)); + *val = 0; + *val2 = scale_uv; return IIO_VAL_INT_PLUS_NANO; case IIO_CHAN_INFO_OFFSET: if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); + *val = -(1 << (chan->scan_type.realbits - 1)); else *val = 0; + + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) { + unsigned long long offset; + unsigned int shift; + + shift = chan->scan_type.realbits - (unipolar ? 0 : 1); + offset = 273ULL << shift; + do_div(offset, 1444); + *val -= offset; + } return IIO_VAL_INT; } return -EINVAL; From 08ca3b78505b4fba1e782ae9266bfaf878e4bdd1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0638/1098] staging:iio:ad7793: Follow new IIO naming spec Make the "in-in_scale_available" attribute follow the new naming spec and rename it to "in_voltage-voltage_scale_available". Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 3c8d1d4c6192..91cb95c67635 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -563,8 +563,9 @@ static ssize_t ad7793_show_scale_available(struct device *dev, return len; } -static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available, - S_IRUGO, ad7793_show_scale_available, NULL, 0); +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, + in_voltage-voltage_scale_available, S_IRUGO, + ad7793_show_scale_available, NULL, 0); static struct attribute *ad7793_attributes[] = { &iio_dev_attr_sampling_frequency.dev_attr.attr, From 87a0c1574d2fd478c24e841c96f5019e5b44762f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0639/1098] staging:iio:ad7793: Fix internal reference value The internal reference for the ad7793 and similar is 1.17V Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7793.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c index 91cb95c67635..112e2b7b5bc4 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/staging/iio/adc/ad7793.c @@ -922,7 +922,7 @@ static int __devinit ad7793_probe(struct spi_device *spi) else if (voltage_uv) st->int_vref_mv = voltage_uv / 1000; else - st->int_vref_mv = 2500; /* Build-in ref */ + st->int_vref_mv = 1170; /* Build-in ref */ spi_set_drvdata(spi, indio_dev); st->spi = spi; From f09906f43b8a0d52e3321db7d6f9d031097b0bc9 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0640/1098] staging:iio:ad7192: Add missing break in switch statement Without the break statement we fall right through to the default case and return an error value. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 22c3923d55eb..b9a74425ff75 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -890,7 +890,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev, } ret = 0; } - + break; default: ret = -EINVAL; } From 74aa933894e1c32376a8372ec8264b8c6f7faf24 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0641/1098] staging:iio:ad7192: Fix setting ACX Write to the correct register when setting the ACX bit. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index b9a74425ff75..0a1bc6a31d02 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -754,7 +754,7 @@ static ssize_t ad7192_set(struct device *dev, else st->mode &= ~AD7192_MODE_ACX; - ad7192_write_reg(st, AD7192_REG_GPOCON, 3, st->mode); + ad7192_write_reg(st, AD7192_REG_MODE, 3, st->mode); break; default: ret = -EINVAL; From a684a0c711d384665b43f9079a035e52a2761eab Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0642/1098] staging:iio:ad7192: Mark channels as unsigned The values reported by the AD7793 are unsigned. In uniploar mode: 0x000000 is zeroscale 0xffffff is fullscale In bipolar mode: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale In bipolar mode there is a binary offset, but the values are still unsigned. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 0a1bc6a31d02..7ba699486326 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -945,7 +945,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN(_chan, _address, _si) \ { .type = IIO_VOLTAGE, \ @@ -955,7 +955,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} #define AD7192_CHAN_TEMP(_chan, _address, _si) \ { .type = IIO_TEMP, \ @@ -965,7 +965,7 @@ static const struct iio_info ad7195_info = { IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ .address = _address, \ .scan_index = _si, \ - .scan_type = IIO_ST('s', 24, 32, 0)} + .scan_type = IIO_ST('u', 24, 32, 0)} static struct iio_chan_spec ad7192_channels[] = { AD7192_CHAN_DIFF(1, 2, NULL, AD7192_CH_AIN1P_AIN2M, 0), From 58cdff6ee71b4ea00a6b822a52ebf9ceb0b6a7d5 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0643/1098] staging:iio:ad7192: Report channel offset In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number of bits) on the reported value. Currently this value is subtracted when doing a manual read. While this works for manual channel readings it does not work for buffered mode. So report the offset in the channels offset property, which will work in both modes. Signed-off-by: Lars-Peter Clausen --- drivers/staging/iio/adc/ad7192.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 7ba699486326..73483d26a034 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -826,8 +826,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_VOLTAGE: - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); break; case IIO_TEMP: *val -= 0x800000; @@ -853,6 +851,12 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + return IIO_VAL_INT; } return -EINVAL; @@ -942,7 +946,8 @@ static const struct iio_info ad7195_info = { .channel = _chan, \ .channel2 = _chan2, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)} @@ -952,7 +957,8 @@ static const struct iio_info ad7195_info = { .indexed = 1, \ .channel = _chan, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)} From 4fcbcf95b775acc430742a09fb3334dce08b6c10 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0644/1098] staging:iio:ad7192: Report offset and scale for temperature channel The temperature channel reports values in degree Kelvin with sensitivity of 5630 codes per degree. If the chip is configured in bipolar mode there is an additional binary offset of 0x800000 and the sensitivity is divided by two. Currently the driver does the mapping from the raw value to degree Celsius when doing a manual conversion. This has several disadvantages, the major one being that it does not work for buffered mode, also by doing the division by the sensitivity in the driver the precession of the reported value is needlessly reduced. Furthermore the current calculation only works in bipolar mode and the current scale is of by a factor of 1000. This patch modifies the driver to report correct offset and scale values in both unipolar and bipolar mode and to report the raw temperature value for manual conversions. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7192.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 73483d26a034..095837285f4f 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -798,6 +798,11 @@ static const struct attribute_group ad7195_attribute_group = { .attrs = ad7195_attributes, }; +static unsigned int ad7192_get_temp_scale(bool unipolar) +{ + return unipolar ? 2815 * 2 : 2815; +} + static int ad7192_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -824,17 +829,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, *val = (smpl >> chan->scan_type.shift) & ((1 << (chan->scan_type.realbits)) - 1); - switch (chan->type) { - case IIO_VOLTAGE: - break; - case IIO_TEMP: - *val -= 0x800000; - *val /= 2815; /* temp Kelvin */ - *val -= 273; /* temp Celsius */ - break; - default: - return -EINVAL; - } return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -846,16 +840,20 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, mutex_unlock(&indio_dev->mlock); return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: - *val = 1000; - return IIO_VAL_INT; + *val = 0; + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); + *val = -(1 << (chan->scan_type.realbits - 1)); else *val = 0; + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) + *val -= 273 * ad7192_get_temp_scale(unipolar); return IIO_VAL_INT; } From 70e01880a9b2c548d3911d0eed467d664aad5986 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 17:36:00 +0100 Subject: [PATCH 0645/1098] staging:iio:ad7780: Mark channels as unsigned The values reported by the AD7780 are unsigned with a binary offset: 0x000000 is negative fullscale 0x800000 is zeroscale 0xffffff is positive fullscale So mark the channel in the channel spec as unsigned rather than signed. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7780.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index 1ece2ac8de56..19ee49c95de4 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -131,9 +131,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 24, .storagebits = 32, .shift = 8, @@ -146,9 +147,10 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { .indexed = 1, .channel = 0, .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | - IIO_CHAN_INFO_SCALE_SHARED_BIT, + IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_OFFSET_SHARED_BIT, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 20, .storagebits = 32, .shift = 12, From 95d1c8c7e26e303ccab5b65fe0ce04f70f42ea8a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 2 Aug 2012 11:10:00 +0100 Subject: [PATCH 0646/1098] iio: lm3533-als: Fix build warnings Fix below build warnings: CC [M] drivers/iio/light/lm3533-als.o drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.show') [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: initialization from incompatible pointer type [enabled by default] drivers/iio/light/lm3533-als.c:667:8: warning: (near initialization for 'dev_attr_in_illuminance0_thresh_either_en.store') [enabled by default] Signed-off-by: Axel Lin --- drivers/iio/light/lm3533-als.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c index c3e7bac13123..e45712a921ce 100644 --- a/drivers/iio/light/lm3533-als.c +++ b/drivers/iio/light/lm3533-als.c @@ -404,7 +404,7 @@ out: return ret; } -static int show_thresh_either_en(struct device *dev, +static ssize_t show_thresh_either_en(struct device *dev, struct device_attribute *attr, char *buf) { @@ -424,7 +424,7 @@ static int show_thresh_either_en(struct device *dev, return scnprintf(buf, PAGE_SIZE, "%u\n", enable); } -static int store_thresh_either_en(struct device *dev, +static ssize_t store_thresh_either_en(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { From f3d9d365ff7f36c4e3491ef31788449f419b781b Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 2 Aug 2012 22:17:48 +0200 Subject: [PATCH 0647/1098] ti-st: Fix check for pdata->chip_awake function pointer ll_device_want_to_wakeup(): Fix the NULL pointer check on pdata->chip_awake, which is performed on the wrong function pointer Signed-off-by: Matthias Kaehlcke Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_ll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 1ff460a8e9c7..93b4d67cc4a3 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -87,7 +87,7 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) /* communicate to platform about chip wakeup */ kim_data = st_data->kim_data; pdata = kim_data->kim_pdev->dev.platform_data; - if (pdata->chip_asleep) + if (pdata->chip_awake) pdata->chip_awake(NULL); } From f3261dfb5538e2ff0264fde3050dbd4e922fa296 Mon Sep 17 00:00:00 2001 From: Raphael Assenat Date: Thu, 16 Aug 2012 12:56:40 -0400 Subject: [PATCH 0648/1098] 1-Wire: Add support for the maxim ds1825 temperature sensor This patch adds support for maxim ds1825 based 1-wire temperature sensors. Signed-off-by: Raphael Assenat Signed-off-by: Greg Kroah-Hartman --- Documentation/w1/slaves/w1_therm | 2 ++ drivers/w1/slaves/w1_therm.c | 9 +++++++++ drivers/w1/w1_family.h | 1 + 3 files changed, 12 insertions(+) diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 0403aaaba878..874a8ca93feb 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -3,6 +3,7 @@ Kernel driver w1_therm Supported chips: * Maxim ds18*20 based temperature sensors. + * Maxim ds1825 based temperature sensors. Author: Evgeniy Polyakov @@ -15,6 +16,7 @@ supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 +W1_THERM_DS1825 0x3B Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index d90062b211f8..92d08e7fcba2 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -91,6 +91,11 @@ static struct w1_family w1_therm_family_DS28EA00 = { .fops = &w1_therm_fops, }; +static struct w1_family w1_therm_family_DS1825 = { + .fid = W1_THERM_DS1825, + .fops = &w1_therm_fops, +}; + struct w1_therm_family_converter { u8 broken; @@ -120,6 +125,10 @@ static struct w1_therm_family_converter w1_therm_families[] = { .f = &w1_therm_family_DS28EA00, .convert = w1_DS18B20_convert_temp }, + { + .f = &w1_therm_family_DS1825, + .convert = w1_DS18B20_convert_temp + } }; static inline int w1_DS18B20_convert_temp(u8 rom[9]) diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index b00ada44a89b..a1f0ce151d53 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -39,6 +39,7 @@ #define W1_EEPROM_DS2431 0x2D #define W1_FAMILY_DS2760 0x30 #define W1_FAMILY_DS2780 0x32 +#define W1_THERM_DS1825 0x3B #define W1_FAMILY_DS2781 0x3D #define W1_THERM_DS28EA00 0x42 From 1ae811ee27912a0521e4b92dc9a1850c0243a247 Mon Sep 17 00:00:00 2001 From: "bjschuma@gmail.com" Date: Wed, 8 Aug 2012 13:57:06 -0400 Subject: [PATCH 0649/1098] NFS: Fix a regression when loading the NFS v4 module Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module from loading on mount, since the kernel sees that something named "nfs4" has already been loaded. To work around this, I've renamed the modules to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko". I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount -t nfs4` still works. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/Makefile | 18 +++++++++--------- fs/nfs/client.c | 2 +- fs/nfs/nfs4_fs.h | 3 +++ fs/nfs/nfs4super.c | 15 --------------- fs/nfs/super.c | 37 ++++++++++++++++++++++++++++++++++++- 5 files changed, 49 insertions(+), 26 deletions(-) diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile index 8bf3a3f6925a..b7db60897f91 100644 --- a/fs/nfs/Makefile +++ b/fs/nfs/Makefile @@ -12,19 +12,19 @@ nfs-$(CONFIG_ROOT_NFS) += nfsroot.o nfs-$(CONFIG_SYSCTL) += sysctl.o nfs-$(CONFIG_NFS_FSCACHE) += fscache.o fscache-index.o -obj-$(CONFIG_NFS_V2) += nfs2.o -nfs2-y := nfs2super.o proc.o nfs2xdr.o +obj-$(CONFIG_NFS_V2) += nfsv2.o +nfsv2-y := nfs2super.o proc.o nfs2xdr.o -obj-$(CONFIG_NFS_V3) += nfs3.o -nfs3-y := nfs3super.o nfs3client.o nfs3proc.o nfs3xdr.o -nfs3-$(CONFIG_NFS_V3_ACL) += nfs3acl.o +obj-$(CONFIG_NFS_V3) += nfsv3.o +nfsv3-y := nfs3super.o nfs3client.o nfs3proc.o nfs3xdr.o +nfsv3-$(CONFIG_NFS_V3_ACL) += nfs3acl.o -obj-$(CONFIG_NFS_V4) += nfs4.o -nfs4-y := nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o nfs4super.o nfs4file.o \ +obj-$(CONFIG_NFS_V4) += nfsv4.o +nfsv4-y := nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o nfs4super.o nfs4file.o \ delegation.o idmap.o callback.o callback_xdr.o callback_proc.o \ nfs4namespace.o nfs4getroot.o nfs4client.o -nfs4-$(CONFIG_SYSCTL) += nfs4sysctl.o -nfs4-$(CONFIG_NFS_V4_1) += pnfs.o pnfs_dev.o +nfsv4-$(CONFIG_SYSCTL) += nfs4sysctl.o +nfsv4-$(CONFIG_NFS_V4_1) += pnfs.o pnfs_dev.o obj-$(CONFIG_PNFS_FILE_LAYOUT) += nfs_layout_nfsv41_files.o nfs_layout_nfsv41_files-y := nfs4filelayout.o nfs4filelayoutdev.o diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 9fc0d9dfc91b..99694442b93f 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -105,7 +105,7 @@ struct nfs_subversion *get_nfs_version(unsigned int version) if (IS_ERR(nfs)) { mutex_lock(&nfs_version_mutex); - request_module("nfs%d", version); + request_module("nfsv%d", version); nfs = find_nfs_version(version); mutex_unlock(&nfs_version_mutex); } diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 3b950dd81e81..da0618aeeadb 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -205,6 +205,9 @@ extern const struct dentry_operations nfs4_dentry_operations; int nfs_atomic_open(struct inode *, struct dentry *, struct file *, unsigned, umode_t, int *); +/* super.c */ +extern struct file_system_type nfs4_fs_type; + /* nfs4namespace.c */ rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *); struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *, struct inode *, struct qstr *); diff --git a/fs/nfs/nfs4super.c b/fs/nfs/nfs4super.c index 12a31a9dbcdd..bd61221ad2c5 100644 --- a/fs/nfs/nfs4super.c +++ b/fs/nfs/nfs4super.c @@ -23,14 +23,6 @@ static struct dentry *nfs4_referral_mount(struct file_system_type *fs_type, static struct dentry *nfs4_remote_referral_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data); -static struct file_system_type nfs4_fs_type = { - .owner = THIS_MODULE, - .name = "nfs4", - .mount = nfs_fs_mount, - .kill_sb = nfs_kill_super, - .fs_flags = FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA, -}; - static struct file_system_type nfs4_remote_fs_type = { .owner = THIS_MODULE, .name = "nfs4", @@ -344,14 +336,8 @@ static int __init init_nfs_v4(void) if (err) goto out1; - err = register_filesystem(&nfs4_fs_type); - if (err < 0) - goto out2; - register_nfs_version(&nfs_v4); return 0; -out2: - nfs4_unregister_sysctl(); out1: nfs_idmap_quit(); out: @@ -361,7 +347,6 @@ out: static void __exit exit_nfs_v4(void) { unregister_nfs_version(&nfs_v4); - unregister_filesystem(&nfs4_fs_type); nfs4_unregister_sysctl(); nfs_idmap_quit(); } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index ac6a3c55dce4..c4a15c55519c 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -319,6 +319,34 @@ EXPORT_SYMBOL_GPL(nfs_sops); static void nfs4_validate_mount_flags(struct nfs_parsed_mount_data *); static int nfs4_validate_mount_data(void *options, struct nfs_parsed_mount_data *args, const char *dev_name); + +struct file_system_type nfs4_fs_type = { + .owner = THIS_MODULE, + .name = "nfs4", + .mount = nfs_fs_mount, + .kill_sb = nfs_kill_super, + .fs_flags = FS_RENAME_DOES_D_MOVE|FS_REVAL_DOT|FS_BINARY_MOUNTDATA, +}; +EXPORT_SYMBOL_GPL(nfs4_fs_type); + +static int __init register_nfs4_fs(void) +{ + return register_filesystem(&nfs4_fs_type); +} + +static void unregister_nfs4_fs(void) +{ + unregister_filesystem(&nfs4_fs_type); +} +#else +static int __init register_nfs4_fs(void) +{ + return 0; +} + +static void unregister_nfs4_fs(void) +{ +} #endif static struct shrinker acl_shrinker = { @@ -337,12 +365,18 @@ int __init register_nfs_fs(void) if (ret < 0) goto error_0; - ret = nfs_register_sysctl(); + ret = register_nfs4_fs(); if (ret < 0) goto error_1; + + ret = nfs_register_sysctl(); + if (ret < 0) + goto error_2; register_shrinker(&acl_shrinker); return 0; +error_2: + unregister_nfs4_fs(); error_1: unregister_filesystem(&nfs_fs_type); error_0: @@ -356,6 +390,7 @@ void __exit unregister_nfs_fs(void) { unregister_shrinker(&acl_shrinker); nfs_unregister_sysctl(); + unregister_nfs4_fs(); unregister_filesystem(&nfs_fs_type); } From 425e776d93a7a5070b77d4f458a5bab0f924652c Mon Sep 17 00:00:00 2001 From: "bjschuma@gmail.com" Date: Wed, 8 Aug 2012 13:57:10 -0400 Subject: [PATCH 0650/1098] NFS: Alias the nfs module to nfs4 This allows distros to remove the line from their modprobe configuration. Signed-off-by: Bryan Schumaker Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index c4a15c55519c..239aff7338eb 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2680,4 +2680,6 @@ MODULE_PARM_DESC(max_session_slots, "Maximum number of outstanding NFSv4.1 " module_param(send_implementation_id, ushort, 0644); MODULE_PARM_DESC(send_implementation_id, "Send implementation ID with NFSv4.1 exchange_id"); +MODULE_ALIAS("nfs4"); + #endif /* CONFIG_NFS_V4 */ From 519d3959e30a98f8e135e7a16647c10af5ad63d5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 17:30:10 -0400 Subject: [PATCH 0651/1098] NFSv4: Fix pointer arithmetic in decode_getacl Resetting the cursor xdr->p to a previous value is not a safe practice: if the xdr_stream has crossed out of the initial iovec, then a bunch of other fields would need to be reset too. Fix this issue by using xdr_enter_page() so that the buffer gets page aligned at the bitmap _before_ we decode it. Also fix the confusion of the ACL length with the page buffer length by not adding the base offset to the ACL length... Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 2 +- fs/nfs/nfs4xdr.c | 21 +++++++-------------- 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c77d296bdaa6..286ab7078413 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3819,7 +3819,7 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu if (ret) goto out_free; - acl_len = res.acl_len - res.acl_data_offset; + acl_len = res.acl_len; if (acl_len > args.acl_len) nfs4_write_cached_acl(inode, NULL, 0, acl_len); else diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index ca13483edd60..54d3f5a9faa6 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5049,18 +5049,14 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, uint32_t attrlen, bitmap[3] = {0}; int status; - size_t page_len = xdr->buf->page_len; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) goto out; + xdr_enter_page(xdr, xdr->buf->page_len); + bm_p = xdr->p; - res->acl_data_offset = be32_to_cpup(bm_p) + 2; - res->acl_data_offset <<= 2; - /* Check if the acl data starts beyond the allocated buffer */ - if (res->acl_data_offset > page_len) - return -ERANGE; if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; @@ -5074,23 +5070,20 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ - xdr->p = bm_p; + res->acl_data_offset = (xdr->p - bm_p) << 2; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ - attrlen += res->acl_data_offset; - if (attrlen > page_len) { + res->acl_len = attrlen; + if (attrlen + res->acl_data_offset > xdr->buf->page_len) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ - res->acl_len = attrlen; goto out; } - dprintk("NFS: acl reply: attrlen %u > page_len %zu\n", - attrlen, page_len); + dprintk("NFS: acl reply: attrlen %u > page_len %u\n", + attrlen, xdr->buf->page_len); return -EINVAL; } - xdr_read_pages(xdr, attrlen); - res->acl_len = attrlen; } else status = -EOPNOTSUPP; From b291f1b1c86aa0c7bc3df2994e6a1a4e53f1fde0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 18:30:41 -0400 Subject: [PATCH 0652/1098] NFSv4: Fix the acl cache size calculation Currently, we do not take into account the size of the 16 byte struct nfs4_cached_acl header, when deciding whether or not we should cache the acl data. Consequently, we will end up allocating an 8k buffer in order to fit a maximum size 4k acl. This patch adjusts the calculation so that we limit the cache size to 4k for the acl header+data. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 286ab7078413..635274140b18 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3737,9 +3737,10 @@ out: static void nfs4_write_cached_acl(struct inode *inode, struct page **pages, size_t pgbase, size_t acl_len) { struct nfs4_cached_acl *acl; + size_t buflen = sizeof(*acl) + acl_len; - if (pages && acl_len <= PAGE_SIZE) { - acl = kmalloc(sizeof(*acl) + acl_len, GFP_KERNEL); + if (pages && buflen <= PAGE_SIZE) { + acl = kmalloc(buflen, GFP_KERNEL); if (acl == NULL) goto out; acl->cached = 1; From cff298c721099c9ac4cea7196a37097ba2847946 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Aug 2012 17:14:17 -0400 Subject: [PATCH 0653/1098] NFSv4: Don't use private xdr_stream fields in decode_getacl Instead of using the private field xdr->p from struct xdr_stream, use the public xdr_stream_pos(). Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 54d3f5a9faa6..1bfbd67c556d 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5045,10 +5045,10 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, struct nfs_getaclres *res) { unsigned int savep; - __be32 *bm_p; uint32_t attrlen, bitmap[3] = {0}; int status; + unsigned int pg_offset; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) @@ -5056,7 +5056,8 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, xdr_enter_page(xdr, xdr->buf->page_len); - bm_p = xdr->p; + /* Calculate the offset of the page data */ + pg_offset = xdr->buf->head[0].iov_len; if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; @@ -5070,18 +5071,18 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ - res->acl_data_offset = (xdr->p - bm_p) << 2; + res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ res->acl_len = attrlen; - if (attrlen + res->acl_data_offset > xdr->buf->page_len) { + if (attrlen > (xdr->nwords << 2)) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ goto out; } dprintk("NFS: acl reply: attrlen %u > page_len %u\n", - attrlen, xdr->buf->page_len); + attrlen, xdr->nwords << 2); return -EINVAL; } } else From c5066945b7ea346a11424dbeb7830b7d7d00c206 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Thu, 9 Aug 2012 14:05:49 -0400 Subject: [PATCH 0654/1098] NFS: Clear key construction data if the idmap upcall fails idmap_pipe_downcall already clears this field if the upcall succeeds, but if it fails (rpc.idmapd isn't running) the field will still be set on the next call triggering a BUG_ON(). This patch tries to handle all possible ways that the upcall could fail and clear the idmap key data for each one. Signed-off-by: Bryan Schumaker Tested-by: William Dauchy Cc: stable@vger.kernel.org [>= 3.4] Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 56 +++++++++++++++++++++++++++++++++++++------------- 1 file changed, 42 insertions(+), 14 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index b701358c39c3..6703c73307a5 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -61,6 +61,12 @@ struct idmap { struct mutex idmap_mutex; }; +struct idmap_legacy_upcalldata { + struct rpc_pipe_msg pipe_msg; + struct idmap_msg idmap_msg; + struct idmap *idmap; +}; + /** * nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields * @fattr: fully initialised struct nfs_fattr @@ -324,6 +330,7 @@ static ssize_t nfs_idmap_get_key(const char *name, size_t namelen, ret = nfs_idmap_request_key(&key_type_id_resolver_legacy, name, namelen, type, data, data_size, idmap); + idmap->idmap_key_cons = NULL; mutex_unlock(&idmap->idmap_mutex); } return ret; @@ -380,11 +387,13 @@ static const match_table_t nfs_idmap_tokens = { static int nfs_idmap_legacy_upcall(struct key_construction *, const char *, void *); static ssize_t idmap_pipe_downcall(struct file *, const char __user *, size_t); +static void idmap_release_pipe(struct inode *); static void idmap_pipe_destroy_msg(struct rpc_pipe_msg *); static const struct rpc_pipe_ops idmap_upcall_ops = { .upcall = rpc_pipe_generic_upcall, .downcall = idmap_pipe_downcall, + .release_pipe = idmap_release_pipe, .destroy_msg = idmap_pipe_destroy_msg, }; @@ -616,7 +625,8 @@ void nfs_idmap_quit(void) nfs_idmap_quit_keyring(); } -static int nfs_idmap_prepare_message(char *desc, struct idmap_msg *im, +static int nfs_idmap_prepare_message(char *desc, struct idmap *idmap, + struct idmap_msg *im, struct rpc_pipe_msg *msg) { substring_t substr; @@ -659,6 +669,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, const char *op, void *aux) { + struct idmap_legacy_upcalldata *data; struct rpc_pipe_msg *msg; struct idmap_msg *im; struct idmap *idmap = (struct idmap *)aux; @@ -666,15 +677,15 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, int ret = -ENOMEM; /* msg and im are freed in idmap_pipe_destroy_msg */ - msg = kmalloc(sizeof(*msg), GFP_KERNEL); - if (!msg) - goto out0; - - im = kmalloc(sizeof(*im), GFP_KERNEL); - if (!im) + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) goto out1; - ret = nfs_idmap_prepare_message(key->description, im, msg); + msg = &data->pipe_msg; + im = &data->idmap_msg; + data->idmap = idmap; + + ret = nfs_idmap_prepare_message(key->description, idmap, im, msg); if (ret < 0) goto out2; @@ -683,15 +694,15 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons, ret = rpc_queue_upcall(idmap->idmap_pipe, msg); if (ret < 0) - goto out2; + goto out3; return ret; +out3: + idmap->idmap_key_cons = NULL; out2: - kfree(im); + kfree(data); out1: - kfree(msg); -out0: complete_request_key(cons, ret); return ret; } @@ -775,9 +786,26 @@ out_incomplete: static void idmap_pipe_destroy_msg(struct rpc_pipe_msg *msg) { + struct idmap_legacy_upcalldata *data = container_of(msg, + struct idmap_legacy_upcalldata, + pipe_msg); + struct idmap *idmap = data->idmap; + struct key_construction *cons; + if (msg->errno) { + cons = ACCESS_ONCE(idmap->idmap_key_cons); + idmap->idmap_key_cons = NULL; + complete_request_key(cons, msg->errno); + } /* Free memory allocated in nfs_idmap_legacy_upcall() */ - kfree(msg->data); - kfree(msg); + kfree(data); +} + +static void +idmap_release_pipe(struct inode *inode) +{ + struct rpc_inode *rpci = RPC_I(inode); + struct idmap *idmap = (struct idmap *)rpci->private; + idmap->idmap_key_cons = NULL; } int nfs_map_name_to_uid(const struct nfs_server *server, const char *name, size_t namelen, __u32 *uid) From 12dfd080556124088ed61a292184947711b46cbe Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Thu, 9 Aug 2012 14:05:50 -0400 Subject: [PATCH 0655/1098] NFS: return -ENOKEY when the upcall fails to map the name This allows the normal error-paths to handle the error, rather than making a special call to complete_request_key() just for this instance. Signed-off-by: Bryan Schumaker Tested-by: William Dauchy Cc: stable@vger.kernel.org [>= 3.4] Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index 6703c73307a5..a850079467d8 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -760,9 +760,8 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) } if (!(im.im_status & IDMAP_STATUS_SUCCESS)) { - ret = mlen; - complete_request_key(cons, -ENOKEY); - goto out_incomplete; + ret = -ENOKEY; + goto out; } namelen_in = strnlen(im.im_name, IDMAP_NAMESZ); @@ -779,7 +778,6 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) out: complete_request_key(cons, ret); -out_incomplete: return ret; } From d9875690d9b89a866022ff49e3fcea892345ad92 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 16 Aug 2012 14:51:24 -0700 Subject: [PATCH 0656/1098] Linux 3.6-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ddf5be952e45..9cc77acfc881 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Saber-toothed Squirrel # *DOCUMENTATION* From 16c0b164bd24d44db137693a36b428ba28970c62 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 15 Aug 2012 20:44:27 +0000 Subject: [PATCH 0657/1098] act_mirred: do not drop packets when fails to mirror it We drop packet unconditionally when we fail to mirror it. This is not intended in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge to a tap device used by a VM. When kernel fails to mirror the packet in conditions such as when qemu crashes or stop polling the tap, it's hard for the management software to detect such condition and clean the the mirroring before. This would lead all packets to the bridge to be dropped and break the netowrk of other virtual machines. To solve the issue, the patch does not drop packets when kernel fails to mirror it, and only drop the redirected packets. Signed-off-by: Jason Wang Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/act_mirred.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index fe81cc18e9e0..9c0fd0c78814 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -200,13 +200,12 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, out: if (err) { m->tcf_qstats.overlimits++; - /* should we be asking for packet to be dropped? - * may make sense for redirect case only - */ - retval = TC_ACT_SHOT; - } else { + if (m->tcfm_eaction != TCA_EGRESS_MIRROR) + retval = TC_ACT_SHOT; + else + retval = m->tcf_action; + } else retval = m->tcf_action; - } spin_unlock(&m->tcf_lock); return retval; From f796c20cf67aa54c9130d0dc41307c0025719b85 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:24 +0000 Subject: [PATCH 0658/1098] net: netprio: fix files lock and remove useless d_path bits Add lock to prevent a race with a file closing and also remove useless and ugly sscanf code. The extra code was never needed and the case it supposedly protected against is in fact handled correctly by sock_from_file as pointed out by Al Viro. CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/netprio_cgroup.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c index ed0c0431fcd8..f65dba3afd99 100644 --- a/net/core/netprio_cgroup.c +++ b/net/core/netprio_cgroup.c @@ -277,12 +277,6 @@ out_free_devname: void net_prio_attach(struct cgroup *cgrp, struct cgroup_taskset *tset) { struct task_struct *p; - char *tmp = kzalloc(sizeof(char) * PATH_MAX, GFP_KERNEL); - - if (!tmp) { - pr_warn("Unable to attach cgrp due to alloc failure!\n"); - return; - } cgroup_taskset_for_each(p, cgrp, tset) { unsigned int fd; @@ -296,32 +290,24 @@ void net_prio_attach(struct cgroup *cgrp, struct cgroup_taskset *tset) continue; } - rcu_read_lock(); + spin_lock(&files->file_lock); fdt = files_fdtable(files); for (fd = 0; fd < fdt->max_fds; fd++) { - char *path; struct file *file; struct socket *sock; - unsigned long s; - int rv, err = 0; + int err; file = fcheck_files(files, fd); if (!file) continue; - path = d_path(&file->f_path, tmp, PAGE_SIZE); - rv = sscanf(path, "socket:[%lu]", &s); - if (rv <= 0) - continue; - sock = sock_from_file(file, &err); - if (!err) + if (sock) sock_update_netprioidx(sock->sk, p); } - rcu_read_unlock(); + spin_unlock(&files->file_lock); task_unlock(p); } - kfree(tmp); } static struct cftype ss_files[] = { From 48a87cc26c13b68f6cce4e9d769fcb17a6b3e4b8 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:30 +0000 Subject: [PATCH 0659/1098] net: netprio: fd passed in SCM_RIGHTS datagram not set correctly A socket fd passed in a SCM_RIGHTS datagram was not getting updated with the new tasks cgrp prioidx. This leaves IO on the socket tagged with the old tasks priority. To fix this add a check in the scm recvmsg path to update the sock cgrp prioidx with the new tasks value. Thanks to Al Viro for catching this. CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/scm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/scm.c b/net/core/scm.c index 8f6ccfd68ef4..040cebeed45b 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -265,6 +265,7 @@ void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm) for (i=0, cmfptr=(__force int __user *)CMSG_DATA(cm); isk, current); fd_install(new_fd, fp[i]); } From 476ad154f3b41dd7d9a08a2f641e28388abc2fd1 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 14 Aug 2012 12:34:35 +0000 Subject: [PATCH 0660/1098] net: netprio: fix cgrp create and write priomap race A race exists where creating cgroups and also updating the priomap may result in losing a priomap update. This is because priomap writers are not protected by rtnl_lock. Move priority writer into rtnl_lock()/rtnl_unlock(). CC: Neil Horman Reported-by: Al Viro Signed-off-by: John Fastabend Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/netprio_cgroup.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c index f65dba3afd99..c75e3f9d060f 100644 --- a/net/core/netprio_cgroup.c +++ b/net/core/netprio_cgroup.c @@ -101,12 +101,10 @@ static int write_update_netdev_table(struct net_device *dev) u32 max_len; struct netprio_map *map; - rtnl_lock(); max_len = atomic_read(&max_prioidx) + 1; map = rtnl_dereference(dev->priomap); if (!map || map->priomap_len < max_len) ret = extend_netdev_table(dev, max_len); - rtnl_unlock(); return ret; } @@ -256,17 +254,17 @@ static int write_priomap(struct cgroup *cgrp, struct cftype *cft, if (!dev) goto out_free_devname; + rtnl_lock(); ret = write_update_netdev_table(dev); if (ret < 0) goto out_put_dev; - rcu_read_lock(); - map = rcu_dereference(dev->priomap); + map = rtnl_dereference(dev->priomap); if (map) map->priomap[prioidx] = priority; - rcu_read_unlock(); out_put_dev: + rtnl_unlock(); dev_put(dev); out_free_devname: From e7d6582e04212943d23d6e42b86ede5d9a0ebe04 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 3 Aug 2012 16:08:36 +1000 Subject: [PATCH 0661/1098] m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types The ColdFire CPU sub-arch has kernel clk code support, so select CONFIG_HAVE_CLK. Signed-off-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 82068349a2bb..59eb9f359809 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice From 42b1b94635a467407841c89e91d9209c55f6bc61 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 14 Aug 2012 14:31:33 +1000 Subject: [PATCH 0662/1098] m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types There is no specific atomic64 support code for any m68k CPUs, so we should select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection of this and select it for all m68k. Signed-off-by: Greg Ungerer Acked-by: Fengguang Wu Acked-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 + arch/m68k/Kconfig.cpu | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 4a469907f04a..b22df9410dce 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 59eb9f359809..c4eb79edecec 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -59,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -70,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -80,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -91,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 From f0e0e9bba5eed2086f6001be14f21566a49bed10 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Mon, 30 Jul 2012 13:19:07 -0700 Subject: [PATCH 0663/1098] tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl Fix up a new coccinelle warnings reported by Fengguang Wu + Intel 0-DAY kernel build testing backend: drivers/vhost/tcm_vhost.c:537:23-29: ERROR: allocation function on line 533 returns NULL not ERR_PTR on failure vim +537 drivers/vhost/tcm_vhost.c 534 if (!sg) 535 return -ENOMEM; 536 pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__, > 537 sg, sgl_count, IS_ERR(sg)); 538 sg_init_table(sg, sgl_count); 539 540 tv_cmd->tvc_sgl = sg; Signed-off-by: Fengguang Wu Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index fb366540ed54..481af88a5ff5 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -533,8 +533,8 @@ static int vhost_scsi_map_iov_to_sgl(struct tcm_vhost_cmd *tv_cmd, sg = kmalloc(sizeof(tv_cmd->tvc_sgl[0]) * sgl_count, GFP_ATOMIC); if (!sg) return -ENOMEM; - pr_debug("%s sg %p sgl_count %u is_err %ld\n", __func__, - sg, sgl_count, IS_ERR(sg)); + pr_debug("%s sg %p sgl_count %u is_err %d\n", __func__, + sg, sgl_count, !sg); sg_init_table(sg, sgl_count); tv_cmd->tvc_sgl = sg; From 101998f6fcd680ed12d85633b81504feb1cb0667 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 30 Jul 2012 13:30:00 -0700 Subject: [PATCH 0664/1098] tcm_vhost: Post-merge review changes requested by MST This patch contains the post RFC-v5 (post-merge) changes, this includes: - Add locking comment - Move vhost_scsi_complete_cmd ahead of TFO callbacks in order to drop forward declarations - Drop extra '!= NULL' usage in vhost_scsi_complete_cmd_work() - Change vhost_scsi_*_handle_kick() to use pr_debug - Fix possible race in vhost_scsi_set_endpoint() for vs->vs_tpg checking + assignment. - Convert tv_tpg->tpg_vhost_count + ->tv_tpg_port_count from atomic_t -> int, and make sure reference is protected by ->tv_tpg_mutex. - Drop unnecessary vhost_scsi->vhost_ref_cnt - Add 'err:' label for exception path in vhost_scsi_clear_endpoint() - Add enum for VQ numbers, add usage in vhost_scsi_open() - Add vhost_scsi_flush() + vhost_scsi_flush_vq() following drivers/vhost/net.c - Add smp_wmb() + vhost_scsi_flush() call during vhost_scsi_set_features() - Drop unnecessary copy_from_user() usage with GET_ABI_VERSION ioctl - Add missing vhost_scsi_compat_ioctl() caller for vhost_scsi_fops - Fix function parameter definition first line to follow existing vhost code style - Change 'vHost' usage -> 'vhost' in handful of locations - Change -EPERM -> -EBUSY usage for two failures in tcm_vhost_drop_nexus() - Add comment for tcm_vhost_workqueue in tcm_vhost_init() - Make GET_ABI_VERSION return 'int' + add comment in tcm_vhost.h Reported-by: Michael S. Tsirkin Cc: Michael S. Tsirkin Cc: Stefan Hajnoczi Cc: Anthony Liguori Cc: Zhi Yong Wu Cc: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 195 +++++++++++++++++++++----------------- drivers/vhost/tcm_vhost.h | 9 +- 2 files changed, 111 insertions(+), 93 deletions(-) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 481af88a5ff5..74b2edaaf1f6 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -53,9 +53,14 @@ #include "vhost.h" #include "tcm_vhost.h" +enum { + VHOST_SCSI_VQ_CTL = 0, + VHOST_SCSI_VQ_EVT = 1, + VHOST_SCSI_VQ_IO = 2, +}; + struct vhost_scsi { - atomic_t vhost_ref_cnt; - struct tcm_vhost_tpg *vs_tpg; + struct tcm_vhost_tpg *vs_tpg; /* Protected by vhost_scsi->dev.mutex */ struct vhost_dev dev; struct vhost_virtqueue vqs[3]; @@ -131,8 +136,7 @@ static u32 tcm_vhost_get_default_depth(struct se_portal_group *se_tpg) return 1; } -static u32 tcm_vhost_get_pr_transport_id( - struct se_portal_group *se_tpg, +static u32 tcm_vhost_get_pr_transport_id(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg, int *format_code, @@ -162,8 +166,7 @@ static u32 tcm_vhost_get_pr_transport_id( format_code, buf); } -static u32 tcm_vhost_get_pr_transport_id_len( - struct se_portal_group *se_tpg, +static u32 tcm_vhost_get_pr_transport_id_len(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg, int *format_code) @@ -192,8 +195,7 @@ static u32 tcm_vhost_get_pr_transport_id_len( format_code); } -static char *tcm_vhost_parse_pr_out_transport_id( - struct se_portal_group *se_tpg, +static char *tcm_vhost_parse_pr_out_transport_id(struct se_portal_group *se_tpg, const char *buf, u32 *out_tid_len, char **port_nexus_ptr) @@ -236,8 +238,7 @@ static struct se_node_acl *tcm_vhost_alloc_fabric_acl( return &nacl->se_node_acl; } -static void tcm_vhost_release_fabric_acl( - struct se_portal_group *se_tpg, +static void tcm_vhost_release_fabric_acl(struct se_portal_group *se_tpg, struct se_node_acl *se_nacl) { struct tcm_vhost_nacl *nacl = container_of(se_nacl, @@ -297,7 +298,16 @@ static int tcm_vhost_get_cmd_state(struct se_cmd *se_cmd) return 0; } -static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *); +static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) +{ + struct vhost_scsi *vs = tv_cmd->tvc_vhost; + + spin_lock_bh(&vs->vs_completion_lock); + list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); + spin_unlock_bh(&vs->vs_completion_lock); + + vhost_work_queue(&vs->dev, &vs->vs_completion_work); +} static int tcm_vhost_queue_data_in(struct se_cmd *se_cmd) { @@ -381,7 +391,7 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work *work) vs_completion_work); struct tcm_vhost_cmd *tv_cmd; - while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs)) != NULL) { + while ((tv_cmd = vhost_scsi_get_cmd_from_completion(vs))) { struct virtio_scsi_cmd_resp v_rsp; struct se_cmd *se_cmd = &tv_cmd->tvc_se_cmd; int ret; @@ -408,19 +418,6 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work *work) vhost_signal(&vs->dev, &vs->vqs[2]); } -static void vhost_scsi_complete_cmd(struct tcm_vhost_cmd *tv_cmd) -{ - struct vhost_scsi *vs = tv_cmd->tvc_vhost; - - pr_debug("%s tv_cmd %p\n", __func__, tv_cmd); - - spin_lock_bh(&vs->vs_completion_lock); - list_add_tail(&tv_cmd->tvc_completion_list, &vs->vs_completion_list); - spin_unlock_bh(&vs->vs_completion_lock); - - vhost_work_queue(&vs->dev, &vs->vs_completion_work); -} - static struct tcm_vhost_cmd *vhost_scsi_allocate_cmd( struct tcm_vhost_tpg *tv_tpg, struct virtio_scsi_cmd_req *v_req, @@ -787,12 +784,12 @@ static void vhost_scsi_handle_vq(struct vhost_scsi *vs) static void vhost_scsi_ctl_handle_kick(struct vhost_work *work) { - pr_err("%s: The handling func for control queue.\n", __func__); + pr_debug("%s: The handling func for control queue.\n", __func__); } static void vhost_scsi_evt_handle_kick(struct vhost_work *work) { - pr_err("%s: The handling func for event queue.\n", __func__); + pr_debug("%s: The handling func for event queue.\n", __func__); } static void vhost_scsi_handle_kick(struct vhost_work *work) @@ -825,11 +822,6 @@ static int vhost_scsi_set_endpoint( return -EFAULT; } } - - if (vs->vs_tpg) { - mutex_unlock(&vs->dev.mutex); - return -EEXIST; - } mutex_unlock(&vs->dev.mutex); mutex_lock(&tcm_vhost_mutex); @@ -839,7 +831,7 @@ static int vhost_scsi_set_endpoint( mutex_unlock(&tv_tpg->tv_tpg_mutex); continue; } - if (atomic_read(&tv_tpg->tv_tpg_vhost_count)) { + if (tv_tpg->tv_tpg_vhost_count != 0) { mutex_unlock(&tv_tpg->tv_tpg_mutex); continue; } @@ -847,14 +839,20 @@ static int vhost_scsi_set_endpoint( if (!strcmp(tv_tport->tport_name, t->vhost_wwpn) && (tv_tpg->tport_tpgt == t->vhost_tpgt)) { - atomic_inc(&tv_tpg->tv_tpg_vhost_count); - smp_mb__after_atomic_inc(); + tv_tpg->tv_tpg_vhost_count++; mutex_unlock(&tv_tpg->tv_tpg_mutex); mutex_unlock(&tcm_vhost_mutex); mutex_lock(&vs->dev.mutex); + if (vs->vs_tpg) { + mutex_unlock(&vs->dev.mutex); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_vhost_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); + return -EEXIST; + } + vs->vs_tpg = tv_tpg; - atomic_inc(&vs->vhost_ref_cnt); smp_mb__after_atomic_inc(); mutex_unlock(&vs->dev.mutex); return 0; @@ -871,38 +869,42 @@ static int vhost_scsi_clear_endpoint( { struct tcm_vhost_tport *tv_tport; struct tcm_vhost_tpg *tv_tpg; - int index; + int index, ret; mutex_lock(&vs->dev.mutex); /* Verify that ring has been setup correctly. */ for (index = 0; index < vs->dev.nvqs; ++index) { if (!vhost_vq_access_ok(&vs->vqs[index])) { - mutex_unlock(&vs->dev.mutex); - return -EFAULT; + ret = -EFAULT; + goto err; } } if (!vs->vs_tpg) { - mutex_unlock(&vs->dev.mutex); - return -ENODEV; + ret = -ENODEV; + goto err; } tv_tpg = vs->vs_tpg; tv_tport = tv_tpg->tport; if (strcmp(tv_tport->tport_name, t->vhost_wwpn) || (tv_tpg->tport_tpgt != t->vhost_tpgt)) { - mutex_unlock(&vs->dev.mutex); pr_warn("tv_tport->tport_name: %s, tv_tpg->tport_tpgt: %hu" " does not match t->vhost_wwpn: %s, t->vhost_tpgt: %hu\n", tv_tport->tport_name, tv_tpg->tport_tpgt, t->vhost_wwpn, t->vhost_tpgt); - return -EINVAL; + ret = -EINVAL; + goto err; } - atomic_dec(&tv_tpg->tv_tpg_vhost_count); + tv_tpg->tv_tpg_vhost_count--; vs->vs_tpg = NULL; mutex_unlock(&vs->dev.mutex); return 0; + +err: + mutex_unlock(&vs->dev.mutex); + return ret; } static int vhost_scsi_open(struct inode *inode, struct file *f) @@ -918,9 +920,9 @@ static int vhost_scsi_open(struct inode *inode, struct file *f) INIT_LIST_HEAD(&s->vs_completion_list); spin_lock_init(&s->vs_completion_lock); - s->vqs[0].handle_kick = vhost_scsi_ctl_handle_kick; - s->vqs[1].handle_kick = vhost_scsi_evt_handle_kick; - s->vqs[2].handle_kick = vhost_scsi_handle_kick; + s->vqs[VHOST_SCSI_VQ_CTL].handle_kick = vhost_scsi_ctl_handle_kick; + s->vqs[VHOST_SCSI_VQ_EVT].handle_kick = vhost_scsi_evt_handle_kick; + s->vqs[VHOST_SCSI_VQ_IO].handle_kick = vhost_scsi_handle_kick; r = vhost_dev_init(&s->dev, s->vqs, 3); if (r < 0) { kfree(s); @@ -949,6 +951,18 @@ static int vhost_scsi_release(struct inode *inode, struct file *f) return 0; } +static void vhost_scsi_flush_vq(struct vhost_scsi *vs, int index) +{ + vhost_poll_flush(&vs->dev.vqs[index].poll); +} + +static void vhost_scsi_flush(struct vhost_scsi *vs) +{ + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_CTL); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_EVT); + vhost_scsi_flush_vq(vs, VHOST_SCSI_VQ_IO); +} + static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) { if (features & ~VHOST_FEATURES) @@ -961,7 +975,8 @@ static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features) return -EFAULT; } vs->dev.acked_features = features; - /* TODO possibly smp_wmb() and flush vqs */ + smp_wmb(); + vhost_scsi_flush(vs); mutex_unlock(&vs->dev.mutex); return 0; } @@ -974,7 +989,7 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, void __user *argp = (void __user *)arg; u64 __user *featurep = argp; u64 features; - int r; + int r, abi_version = VHOST_SCSI_ABI_VERSION; switch (ioctl) { case VHOST_SCSI_SET_ENDPOINT: @@ -988,12 +1003,7 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, return vhost_scsi_clear_endpoint(vs, &backend); case VHOST_SCSI_GET_ABI_VERSION: - if (copy_from_user(&backend, argp, sizeof backend)) - return -EFAULT; - - backend.abi_version = VHOST_SCSI_ABI_VERSION; - - if (copy_to_user(argp, &backend, sizeof backend)) + if (copy_to_user(argp, &abi_version, sizeof abi_version)) return -EFAULT; return 0; case VHOST_GET_FEATURES: @@ -1013,11 +1023,21 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, } } +#ifdef CONFIG_COMPAT +static long vhost_scsi_compat_ioctl(struct file *f, unsigned int ioctl, + unsigned long arg) +{ + return vhost_scsi_ioctl(f, ioctl, (unsigned long)compat_ptr(arg)); +} +#endif + static const struct file_operations vhost_scsi_fops = { .owner = THIS_MODULE, .release = vhost_scsi_release, .unlocked_ioctl = vhost_scsi_ioctl, - /* TODO compat ioctl? */ +#ifdef CONFIG_COMPAT + .compat_ioctl = vhost_scsi_compat_ioctl, +#endif .open = vhost_scsi_open, .llseek = noop_llseek, }; @@ -1054,28 +1074,28 @@ static char *tcm_vhost_dump_proto_id(struct tcm_vhost_tport *tport) return "Unknown"; } -static int tcm_vhost_port_link( - struct se_portal_group *se_tpg, +static int tcm_vhost_port_link(struct se_portal_group *se_tpg, struct se_lun *lun) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, struct tcm_vhost_tpg, se_tpg); - atomic_inc(&tv_tpg->tv_tpg_port_count); - smp_mb__after_atomic_inc(); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count++; + mutex_unlock(&tv_tpg->tv_tpg_mutex); return 0; } -static void tcm_vhost_port_unlink( - struct se_portal_group *se_tpg, +static void tcm_vhost_port_unlink(struct se_portal_group *se_tpg, struct se_lun *se_lun) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, struct tcm_vhost_tpg, se_tpg); - atomic_dec(&tv_tpg->tv_tpg_port_count); - smp_mb__after_atomic_dec(); + mutex_lock(&tv_tpg->tv_tpg_mutex); + tv_tpg->tv_tpg_port_count--; + mutex_unlock(&tv_tpg->tv_tpg_mutex); } static struct se_node_acl *tcm_vhost_make_nodeacl( @@ -1122,8 +1142,7 @@ static void tcm_vhost_drop_nodeacl(struct se_node_acl *se_acl) kfree(nacl); } -static int tcm_vhost_make_nexus( - struct tcm_vhost_tpg *tv_tpg, +static int tcm_vhost_make_nexus(struct tcm_vhost_tpg *tv_tpg, const char *name) { struct se_portal_group *se_tpg; @@ -1168,7 +1187,7 @@ static int tcm_vhost_make_nexus( return -ENOMEM; } /* - * Now register the TCM vHost virtual I_T Nexus as active with the + * Now register the TCM vhost virtual I_T Nexus as active with the * call to __transport_register_session() */ __transport_register_session(se_tpg, tv_nexus->tvn_se_sess->se_node_acl, @@ -1179,8 +1198,7 @@ static int tcm_vhost_make_nexus( return 0; } -static int tcm_vhost_drop_nexus( - struct tcm_vhost_tpg *tpg) +static int tcm_vhost_drop_nexus(struct tcm_vhost_tpg *tpg) { struct se_session *se_sess; struct tcm_vhost_nexus *tv_nexus; @@ -1198,27 +1216,27 @@ static int tcm_vhost_drop_nexus( return -ENODEV; } - if (atomic_read(&tpg->tv_tpg_port_count)) { + if (tpg->tv_tpg_port_count != 0) { mutex_unlock(&tpg->tv_tpg_mutex); - pr_err("Unable to remove TCM_vHost I_T Nexus with" + pr_err("Unable to remove TCM_vhost I_T Nexus with" " active TPG port count: %d\n", - atomic_read(&tpg->tv_tpg_port_count)); - return -EPERM; + tpg->tv_tpg_port_count); + return -EBUSY; } - if (atomic_read(&tpg->tv_tpg_vhost_count)) { + if (tpg->tv_tpg_vhost_count != 0) { mutex_unlock(&tpg->tv_tpg_mutex); - pr_err("Unable to remove TCM_vHost I_T Nexus with" + pr_err("Unable to remove TCM_vhost I_T Nexus with" " active TPG vhost count: %d\n", - atomic_read(&tpg->tv_tpg_vhost_count)); - return -EPERM; + tpg->tv_tpg_vhost_count); + return -EBUSY; } - pr_debug("TCM_vHost_ConfigFS: Removing I_T Nexus to emulated" + pr_debug("TCM_vhost_ConfigFS: Removing I_T Nexus to emulated" " %s Initiator Port: %s\n", tcm_vhost_dump_proto_id(tpg->tport), tv_nexus->tvn_se_sess->se_node_acl->initiatorname); /* - * Release the SCSI I_T Nexus to the emulated vHost Target Port + * Release the SCSI I_T Nexus to the emulated vhost Target Port */ transport_deregister_session(tv_nexus->tvn_se_sess); tpg->tpg_nexus = NULL; @@ -1228,8 +1246,7 @@ static int tcm_vhost_drop_nexus( return 0; } -static ssize_t tcm_vhost_tpg_show_nexus( - struct se_portal_group *se_tpg, +static ssize_t tcm_vhost_tpg_show_nexus(struct se_portal_group *se_tpg, char *page) { struct tcm_vhost_tpg *tv_tpg = container_of(se_tpg, @@ -1250,8 +1267,7 @@ static ssize_t tcm_vhost_tpg_show_nexus( return ret; } -static ssize_t tcm_vhost_tpg_store_nexus( - struct se_portal_group *se_tpg, +static ssize_t tcm_vhost_tpg_store_nexus(struct se_portal_group *se_tpg, const char *page, size_t count) { @@ -1336,8 +1352,7 @@ static struct configfs_attribute *tcm_vhost_tpg_attrs[] = { NULL, }; -static struct se_portal_group *tcm_vhost_make_tpg( - struct se_wwn *wwn, +static struct se_portal_group *tcm_vhost_make_tpg(struct se_wwn *wwn, struct config_group *group, const char *name) { @@ -1385,7 +1400,7 @@ static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) list_del(&tpg->tv_tpg_list); mutex_unlock(&tcm_vhost_mutex); /* - * Release the virtual I_T Nexus for this vHost TPG + * Release the virtual I_T Nexus for this vhost TPG */ tcm_vhost_drop_nexus(tpg); /* @@ -1395,8 +1410,7 @@ static void tcm_vhost_drop_tpg(struct se_portal_group *se_tpg) kfree(tpg); } -static struct se_wwn *tcm_vhost_make_tport( - struct target_fabric_configfs *tf, +static struct se_wwn *tcm_vhost_make_tport(struct target_fabric_configfs *tf, struct config_group *group, const char *name) { @@ -1592,7 +1606,10 @@ static void tcm_vhost_deregister_configfs(void) static int __init tcm_vhost_init(void) { int ret = -ENOMEM; - + /* + * Use our own dedicated workqueue for submitting I/O into + * target core to avoid contention within system_wq. + */ tcm_vhost_workqueue = alloc_workqueue("tcm_vhost", 0, 0); if (!tcm_vhost_workqueue) goto out; diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index c983ed21e413..eff42df14de9 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -47,9 +47,9 @@ struct tcm_vhost_tpg { /* Vhost port target portal group tag for TCM */ u16 tport_tpgt; /* Used to track number of TPG Port/Lun Links wrt to explict I_T Nexus shutdown */ - atomic_t tv_tpg_port_count; - /* Used for vhost_scsi device reference to tpg_nexus */ - atomic_t tv_tpg_vhost_count; + int tv_tpg_port_count; + /* Used for vhost_scsi device reference to tpg_nexus, protected by tv_tpg_mutex */ + int tv_tpg_vhost_count; /* list for tcm_vhost_list */ struct list_head tv_tpg_list; /* Used to protect access for tpg_nexus */ @@ -98,4 +98,5 @@ struct vhost_scsi_target { /* VHOST_SCSI specific defines */ #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) -#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, struct vhost_scsi_target) +/* Changing this breaks userspace. */ +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) From 1fa8f4504130adc34a071a29170f570102136835 Mon Sep 17 00:00:00 2001 From: Mark Rustad Date: Wed, 1 Aug 2012 14:51:53 -0700 Subject: [PATCH 0665/1098] tcm_fc: Avoid debug overhead when not debugging Stop doing a pile of work related to debugging messages when the ft_debug_logging flag is not set. Use unlikely to add the check in a way that the check can be inlined without inlining the whole thing. Signed-off-by: Mark Rustad Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tcm_fc.h | 1 + drivers/target/tcm_fc/tfc_cmd.c | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index c5eb3c33c3db..eea69358ced3 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -131,6 +131,7 @@ extern struct list_head ft_lport_list; extern struct mutex ft_lport_lock; extern struct fc4_prov ft_prov; extern struct target_fabric_configfs *ft_configfs; +extern unsigned int ft_debug_logging; /* * Fabric methods. diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index b9cb5006177e..823e6922249d 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -48,7 +48,7 @@ /* * Dump cmd state for debugging. */ -void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +static void _ft_dump_cmd(struct ft_cmd *cmd, const char *caller) { struct fc_exch *ep; struct fc_seq *sp; @@ -80,6 +80,12 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) } } +void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) +{ + if (unlikely(ft_debug_logging)) + _ft_dump_cmd(cmd, caller); +} + static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; From d0e27c88d795fb9647153063ec48051fd84e1731 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Tue, 14 Aug 2012 16:06:43 -0700 Subject: [PATCH 0666/1098] target: fix NULL pointer dereference bug alloc_page() fails to get memory I am hitting this bug when the target is low in memory that fails the alloc_page() for the newly submitted command. This is a sort of off-by-one bug causing NULL pointer dereference in __free_page() since 'i' here is really the counter of total pages that have been successfully allocated here. Signed-off-by: Yi Zou Cc: Andy Grover Cc: Nicholas Bellinger Cc: Open-FCoE.org Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0eaae23d12b5..a7589ccdb6f3 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2294,9 +2294,9 @@ transport_generic_get_mem(struct se_cmd *cmd) return 0; out: - while (i >= 0) { - __free_page(sg_page(&cmd->t_data_sg[i])); + while (i > 0) { i--; + __free_page(sg_page(&cmd->t_data_sg[i])); } kfree(cmd->t_data_sg); cmd->t_data_sg = NULL; From 5b7517f81449067caf3d402e4abc6cd92096fe62 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 18:56:34 -0700 Subject: [PATCH 0667/1098] tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char * This patch changes the vhost_scsi_target->vhost_wwpn[] type used by VHOST_SCSI_* ioctls to 'char *' as requested by Blue Swirl in order to match the latest QEMU vhost-scsi RFC-v3 userspace code. Queuing this up into target-pending/master for a -rc3 PULL. Reported-by: Blue Swirl Cc: Michael S. Tsirkin Cc: Stefan Hajnoczi Cc: Paolo Bonzini Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index eff42df14de9..e9d5c020fb39 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -91,7 +91,7 @@ struct tcm_vhost_tport { struct vhost_scsi_target { int abi_version; - unsigned char vhost_wwpn[TRANSPORT_IQN_LEN]; + char vhost_wwpn[TRANSPORT_IQN_LEN]; unsigned short vhost_tpgt; }; From 16339464c5d67d0536837fc5342c9c2432b80ae0 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 15 Aug 2012 12:00:16 +0200 Subject: [PATCH 0668/1098] ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path The ldb_di[01]_podf is implemented as a clk-divider that divides by 1 or 2. In reality, the ldb_di[01]_ipu_div dividers divide by either 3.5 or 7. Adding a fixed factor of 1/3.5 fixes their children's clock rates. This should probably be converted to rate table based dividers, once available. Cc: Signed-off-by: Philipp Zabel Signed-off-by: Steffen Trumtrar Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e22..4233d9e3531d 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); From c61307a7cc1be87b6785dad0885492b6ca7998db Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 9 Aug 2012 08:38:43 +0200 Subject: [PATCH 0669/1098] gpio: Fix debug message in of_get_named_gpio_flags() This was probably missed in the conversion done in commit 3d0f7cf ("gpio: Adjust of_xlate API to support multiple GPIO chips"). Signed-off-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index a18c4aa68b1e..f1a45997aea8 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname, gpiochip_find(&gg_data, of_gpiochip_find_and_xlate); of_node_put(gg_data.gpiospec.np); - pr_debug("%s exited with status %d\n", __func__, ret); + pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio); return gg_data.out_gpio; } EXPORT_SYMBOL(of_get_named_gpio_flags); From 1d2a2cd95ee0137a2353d1b5635739c281f27cd4 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 8 Aug 2012 00:14:13 +0000 Subject: [PATCH 0670/1098] target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough This patch fixes a regression bug in pscsi_transport_complete() callback code where *pt was being NULL dereferenced during REPORT_LUNS handling, that was introduced with the spc/sbc refactoring in: commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f Author: Christoph Hellwig Date: Sun May 20 11:59:15 2012 -0400 target: move code for CDB emulation As this is a special case for pscsi_parse_cdb() to call spc_parse_cdb() to allow TCM to handle REPORT_LUN emulation, pscsi_plugin_task will have not been allocated.. So now in pscsi_transport_complete() just check for existence of *pt and return for this special case. Reported-by: Alex Elsayed Cc: Alex Elsayed Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pscsi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 6e32ff6f2fa0..5552fa7426bc 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -673,8 +673,15 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) struct scsi_device *sd = pdv->pdv_sd; int result; struct pscsi_plugin_task *pt = cmd->priv; - unsigned char *cdb = &pt->pscsi_cdb[0]; + unsigned char *cdb; + /* + * Special case for REPORT_LUNs handling where pscsi_plugin_task has + * not been allocated because TCM is handling the emulation directly. + */ + if (!pt) + return 0; + cdb = &pt->pscsi_cdb[0]; result = pt->pscsi_result; /* * Hack to make sure that Write-Protect modepage is set if R/O mode is From 38ab8a2009e33ded06bf80d3a95da393d8d651d6 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 15 Aug 2012 12:32:36 +0300 Subject: [PATCH 0671/1098] drm/i915: fix EDID memory leak in SDVO The EDID returned by drm_get_edid() was never freed. Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d172e9873131..d81bb0bf2885 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1692,6 +1692,7 @@ static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector) edid = intel_sdvo_get_edid(connector); if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL) has_audio = drm_detect_monitor_audio(edid); + kfree(edid); return has_audio; } From b6c7488df68ae3660d81b149b61b55b97929da83 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Tue, 14 Aug 2012 14:35:14 -0700 Subject: [PATCH 0672/1098] drm/i915/contexts: fix list corruption After reset we unconditionally reinitialize lists. If the context switch hasn't yet completed before the suspend, the default context object will end up on lists that are going to go away when we resume. The patch forces the context switch to be synchronous before suspend assuring that the active/inactive tracking is correct at the time of resume. References: https://bugs.freedesktop.org/show_bug.cgi?id=52429 Tested-by: Guang A Yang Signed-off-by: Ben Widawsky Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5c4657a54f97..489e2b162b27 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2365,6 +2365,10 @@ int i915_gpu_idle(struct drm_device *dev) /* Flush everything onto the inactive list. */ for_each_ring(ring, dev_priv, i) { + ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); + if (ret) + return ret; + ret = i915_ring_idle(ring); if (ret) return ret; @@ -2372,10 +2376,6 @@ int i915_gpu_idle(struct drm_device *dev) /* Is the device fubar? */ if (WARN_ON(!list_empty(&ring->gpu_write_list))) return -EBUSY; - - ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID); - if (ret) - return ret; } return 0; From a843af186c3157cee58f1cf689385ab906e1f109 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 14 Aug 2012 11:42:14 -0300 Subject: [PATCH 0673/1098] drm/i915: fix hsw uncached pte They've changed it ... for no apparent reason. Meh. V2: remove unused 'is_hsw' field. Signed-off-by: Daniel Vetter Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/char/agp/intel-agp.h | 1 + drivers/char/agp/intel-gtt.c | 105 ++++++++++++++++++---------- drivers/gpu/drm/i915/i915_gem_gtt.c | 5 +- drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 75 insertions(+), 37 deletions(-) diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 6f007b6c240d..6ec0fff79bc2 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -64,6 +64,7 @@ #define I830_PTE_SYSTEM_CACHED 0x00000006 /* GT PTE cache control fields */ #define GEN6_PTE_UNCACHED 0x00000002 +#define HSW_PTE_UNCACHED 0x00000000 #define GEN6_PTE_LLC 0x00000004 #define GEN6_PTE_LLC_MLC 0x00000006 #define GEN6_PTE_GFDT 0x00000008 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 08fc5cbb13cd..58e32f7c3229 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1156,6 +1156,30 @@ static bool gen6_check_flags(unsigned int flags) return true; } +static void haswell_write_entry(dma_addr_t addr, unsigned int entry, + unsigned int flags) +{ + unsigned int type_mask = flags & ~AGP_USER_CACHED_MEMORY_GFDT; + unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT; + u32 pte_flags; + + if (type_mask == AGP_USER_MEMORY) + pte_flags = HSW_PTE_UNCACHED | I810_PTE_VALID; + else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) { + pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } else { /* set 'normal'/'cached' to LLC by default */ + pte_flags = GEN6_PTE_LLC | I810_PTE_VALID; + if (gfdt) + pte_flags |= GEN6_PTE_GFDT; + } + + /* gen6 has bit11-4 for physical addr bit39-32 */ + addr |= (addr >> 28) & 0xff0; + writel(addr | pte_flags, intel_private.gtt + entry); +} + static void gen6_write_entry(dma_addr_t addr, unsigned int entry, unsigned int flags) { @@ -1382,6 +1406,15 @@ static const struct intel_gtt_driver sandybridge_gtt_driver = { .check_flags = gen6_check_flags, .chipset_flush = i9xx_chipset_flush, }; +static const struct intel_gtt_driver haswell_gtt_driver = { + .gen = 6, + .setup = i9xx_setup, + .cleanup = gen6_cleanup, + .write_entry = haswell_write_entry, + .dma_mask_size = 40, + .check_flags = gen6_check_flags, + .chipset_flush = i9xx_chipset_flush, +}; static const struct intel_gtt_driver valleyview_gtt_driver = { .gen = 7, .setup = i9xx_setup, @@ -1499,77 +1532,77 @@ static const struct intel_gtt_driver_description { { PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG, "ValleyView", &valleyview_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_SDV_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_ULT_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_D_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_M_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT1_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { PCI_DEVICE_ID_INTEL_HASWELL_CRW_S_GT2_PLUS_IG, - "Haswell", &sandybridge_gtt_driver }, + "Haswell", &haswell_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index ee9b68f6bc36..d9a5372ec56f 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -261,7 +261,10 @@ void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt, pte_flags |= GEN6_PTE_CACHE_LLC; break; case I915_CACHE_NONE: - pte_flags |= GEN6_PTE_UNCACHED; + if (IS_HASWELL(dev)) + pte_flags |= HSW_PTE_UNCACHED; + else + pte_flags |= GEN6_PTE_UNCACHED; break; default: BUG(); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index acc99b21e0b6..28725ce5b82c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -115,6 +115,7 @@ #define GEN6_PTE_VALID (1 << 0) #define GEN6_PTE_UNCACHED (1 << 1) +#define HSW_PTE_UNCACHED (0) #define GEN6_PTE_CACHE_LLC (2 << 1) #define GEN6_PTE_CACHE_LLC_MLC (3 << 1) #define GEN6_PTE_CACHE_BITS (3 << 1) From 4eab81366465aedcfd26de960c595bc03599c09f Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 13 Aug 2012 13:22:34 +0300 Subject: [PATCH 0674/1098] drm/i915: extract connector update from intel_ddc_get_modes() for reuse Refactor the connector update part of intel_ddc_get_modes() into a separate intel_connector_update_modes() function for reuse. No functional changes. Signed-off-by: Jani Nikula Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Tested-by: Alex Ferrando Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_drv.h | 2 ++ drivers/gpu/drm/i915/intel_modes.c | 31 +++++++++++++++++++++--------- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 132ab511b90c..cd54cf88a28f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -342,6 +342,8 @@ struct intel_fbc_work { int interval; }; +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid); int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); extern void intel_attach_force_audio_property(struct drm_connector *connector); diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 45848b9b670b..29b72593fbb2 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -32,6 +32,25 @@ #include "intel_drv.h" #include "i915_drv.h" +/** + * intel_connector_update_modes - update connector from edid + * @connector: DRM connector device to use + * @edid: previously read EDID information + */ +int intel_connector_update_modes(struct drm_connector *connector, + struct edid *edid) +{ + int ret; + + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + drm_edid_to_eld(connector, edid); + connector->display_info.raw_edid = NULL; + kfree(edid); + + return ret; +} + /** * intel_ddc_get_modes - get modelist from monitor * @connector: DRM connector device to use @@ -43,18 +62,12 @@ int intel_ddc_get_modes(struct drm_connector *connector, struct i2c_adapter *adapter) { struct edid *edid; - int ret = 0; edid = drm_get_edid(connector, adapter); - if (edid) { - drm_mode_connector_update_edid_property(connector, edid); - ret = drm_add_edid_modes(connector, edid); - drm_edid_to_eld(connector, edid); - connector->display_info.raw_edid = NULL; - kfree(edid); - } + if (!edid) + return 0; - return ret; + return intel_connector_update_modes(connector, edid); } static const struct drm_prop_enum_list force_audio_names[] = { From f1a2f5b7c5f0941d23eef0a095c0b99bf8d051e6 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 13 Aug 2012 13:22:35 +0300 Subject: [PATCH 0675/1098] drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads GMBUS was enabled over bit-banging as the default in commits: commit c3dfefa0a6d235bd465309e12f4c56ea16e71111 Author: Daniel Vetter Date: Tue Feb 14 22:37:25 2012 +0100 drm/i915: reenable gmbus on gen3+ again and commit 0fb3f969c8683505fb7323c06bf8a999a5a45a15 Author: Daniel Vetter Date: Fri Mar 2 19:38:30 2012 +0100 drm/i915: enable gmbus on gen2 Unfortunately, GMBUS seems to fail on some CRT displays. Add a bit-banging fallback to CRT EDID reads. LKML-Reference: <201207251020.47637.maciej.rutecki@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45881 Signed-off-by: Jani Nikula Tested-by: Alex Ferrando Cc: stable@vger.kernel.org (for 3.4+3.5) Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 36 +++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 7ed4a41c3965..23bdc8cd1458 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -326,6 +326,36 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) return ret; } +static struct edid *intel_crt_get_edid(struct drm_connector *connector, + struct i2c_adapter *i2c) +{ + struct edid *edid; + + edid = drm_get_edid(connector, i2c); + + if (!edid && !intel_gmbus_is_forced_bit(i2c)) { + DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); + intel_gmbus_force_bit(i2c, true); + edid = drm_get_edid(connector, i2c); + intel_gmbus_force_bit(i2c, false); + } + + return edid; +} + +/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ +static int intel_crt_ddc_get_modes(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + struct edid *edid; + + edid = intel_crt_get_edid(connector, adapter); + if (!edid) + return 0; + + return intel_connector_update_modes(connector, edid); +} + static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); @@ -336,7 +366,7 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG); i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - edid = drm_get_edid(connector, i2c); + edid = intel_crt_get_edid(connector, i2c); if (edid) { bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; @@ -544,13 +574,13 @@ static int intel_crt_get_modes(struct drm_connector *connector) struct i2c_adapter *i2c; i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); - ret = intel_ddc_get_modes(connector, i2c); + ret = intel_crt_ddc_get_modes(connector, i2c); if (ret || !IS_G4X(dev)) return ret; /* Try to probe digital port for output in DVI-I -> VGA mode. */ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB); - return intel_ddc_get_modes(connector, i2c); + return intel_crt_ddc_get_modes(connector, i2c); } static int intel_crt_set_property(struct drm_connector *connector, From 87161ccdc61862c8b49e75c21209d7f79dc758e9 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 10 Aug 2012 16:00:31 -0700 Subject: [PATCH 0676/1098] MIPS: Octeon: Fix broken interrupt controller code. Since 3.6.0-rc1, We are getting many messages like: WARNING: at kernel/irq/irqdomain.c:444 irq_domain_associate_many+0x23c/0x260() Modules linked in: Call Trace: [] dump_stack+0x8/0x34 [] warn_slowpath_common+0x78/0xa8 [] irq_domain_associate_many+0x23c/0x260 [] irq_create_mapping+0xd0/0x220 [] irq_create_of_mapping+0x7c/0x158 [] irq_of_parse_and_map+0x28/0x40 . . . Both the CIU and GPIO interrupt domains were somewhat screwed up. For the CIU domain, we need to call irq_domain_associate() for each of the preassigned irq numbers. For the GPIO domain, we were applying the register bit offset in octeon_irq_gpio_xlat, but it should be done in octeon_irq_gpio_map instead. Also: Reserve all 8 'core' irqs for the 'core' irq_chip so that they don't get used by the other domains. Remove unused OCTEON_IRQ_* symbols. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4190/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 89 +++++++++---------- .../mips/include/asm/mach-cavium-octeon/irq.h | 10 +-- 2 files changed, 44 insertions(+), 55 deletions(-) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f222b8a5..274cd4fad30c 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 418992042f6f..c22a3078bf11 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 From b4da14abf27227fc767ec257f44de70085a0bc68 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:24 +0200 Subject: [PATCH 0677/1098] MIPS: ath79: Fix number of GPIO lines for AR724[12] The AR724[12] SoCs have more GPIO lines than the AR7240. Signed-off-by: Gabor Juhos Cc: Cc: linux-mips@linux-mips.org Patchwork: https://http://patchwork.linux-mips.org/patch/4167/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/gpio.c | 6 ++++-- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f211832..48fe762d2526 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78ad06d5..dde504477fac 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 From 5fb234560eb3033b35812cd0d80613dbf37dca2f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:25 +0200 Subject: [PATCH 0678/1098] MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 The currently assigned IRQ number to the OHCI controller is incorrect for the AR7240 SoC, and that leads to the following error message from the OHCI driver: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ath79-ohci ath79-ohci: Atheros built-in OHCI controller ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1 ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb 1-1: new full-speed USB device number 2 using ath79-ohci ath79-ohci ath79-ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Fix this by using the correct IRQ number. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4168/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/dev-usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570e7bc4..b2a2311ec85b 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } From 946380676396e633878d07ecb23c9144fbb44abc Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:26 +0200 Subject: [PATCH 0679/1098] MIPS: ath79: select HAVE_CLK It is needed in order to get rid of the following errors: arch/mips/ath79/clock.c:353:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/ath79/clock.c:377:5: error: redefinition of 'clk_enable' include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here arch/mips/ath79/clock.c:383:6: error: redefinition of 'clk_disable' include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here arch/mips/ath79/clock.c:388:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here arch/mips/ath79/clock.c:394:6: error: redefinition of 'clk_put' include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4170/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574df99c..faf65286574e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -89,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 From 143ec74eb10ac9a8c4357341a03b07ac4f04a761 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 12 Jul 2012 21:54:05 +0100 Subject: [PATCH 0680/1098] MIPS: MTX-1: Add udelay to mtx1_pci_idsel Without this udelay(1) PCI idsel does not work correctly on the "singleboard" (T-Mobile Surfbox) for the MiniPCI device. The result is that PCI configuration fails and the MiniPCI card is not detected correctly. Instead of PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x4000ffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40010000-0x40010fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40011000-0x40011fff] We see only the CardBus device: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x40000fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40001000-0x40001fff] Later the device driver shows this error: ath5k 0000:00:03.0: cannot remap PCI memory region ath5k: probe of 0000:00:03.0 failed with error -5 I assume that the logic chip which usually supresses the signal to the CardBus card has some settling time and without the delay it would still let the Cardbus interfere with the response from the MiniPCI card. What I cannot explain is why this behaviour shows up now and not in earlier kernel versions before. Maybe older PCI code was slower? Signed-off-by: Bruno Randolf Cc: linux-mips@linux-mips.org Cc: manuel.lauss@googlemail.com Cc: florian@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/4087/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-mtx1.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 99969484c475..a124c251c0c9 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ From d3cac35cd0a2a987f7559e1829fb0253cea33872 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 14:57:03 +0200 Subject: [PATCH 0681/1098] MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. Commit 6f5d2e970452b5c86906adcb8e7ad246f535ba39 (lmo) / 477c4b07406357ad93d0e32788dbf3ee814eadaa (kernel.org) [[MIPS: VPE: Free relocation chain on error.] fixed the same issue in the vpe loader in 2009 but back then the same bug in module.c went unfixed. Signed-off-by: Ralf Baechle Reported-by: Akhilesh Kumar --- arch/mips/kernel/module.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1c3de3..e5f2f56524ea 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -146,16 +146,15 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; Elf_Addr val, vallo; + struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (mips_hi16_list != NULL) { - struct mips_hi16 *l; l = mips_hi16_list; while (l != NULL) { - struct mips_hi16 *next; unsigned long insn; /* @@ -201,6 +200,12 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + while (l) { + next = l->next; + kfree(l); + l = next; + } + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; From 861667dc82f561e65336ea67f73021b782b4ff74 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 16:59:43 +0200 Subject: [PATCH 0682/1098] MIPS: Fix race condition in module relocation code. The relocation code was essentially taken from the 2.4 modutils which perform relocation in userspace. In 2.6 relocation of multiple modules may be performed in parallel by the in-kernel loader so the global variable mips_hi16_list won't fly anymore. Fix race by moving it into mod_arch_specific. [ralf@linux-mips.org: folded in Tony's followup fix. Thanks Tony!] Signed-off-by: Ralf Baechle Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/4189/ --- arch/mips/include/asm/module.h | 1 + arch/mips/kernel/module.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd654d6..dca8bce8c7ab 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index e5f2f56524ea..8e1fb802c3e2 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -151,9 +149,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { + if (me->arch.r_mips_hi16_list != NULL) { - l = mips_hi16_list; + l = me->arch.r_mips_hi16_list; while (l != NULL) { unsigned long insn; @@ -187,7 +185,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -278,6 +276,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr From c54de490a2e4e74164f747925ff05c00dfa153cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Aug 2012 00:34:18 +0200 Subject: [PATCH 0683/1098] MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. In case a series of R_MIPS_HI16 relocations was not followed by an R_MIPS_LO16 relocation we were leaking the hi16 relocation chain. Handle that error and return an error. Signed-off-by: Ralf Baechle --- arch/mips/kernel/module.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 8e1fb802c3e2..4f8c3cba8c0c 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -140,19 +140,30 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; - struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (me->arch.r_mips_hi16_list != NULL) { - l = me->arch.r_mips_hi16_list; while (l != NULL) { + struct mips_hi16 *next; unsigned long insn; /* @@ -198,11 +209,8 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: - while (l) { - next = l->next; - kfree(l); - l = next; - } + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); @@ -300,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } From 5a6704454a68ab6e27e4fc5b82818a8c5733bf29 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jun 2012 12:07:51 +0200 Subject: [PATCH 0684/1098] MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/dev-spi.c | 4 +++ .../asm/mach-bcm63xx/bcm63xx_dev_spi.h | 2 ++ .../include/asm/mach-bcm63xx/bcm63xx_regs.h | 13 +++++++-- drivers/spi/spi-bcm63xx.c | 29 ++++++++++++++++--- 4 files changed, 41 insertions(+), 7 deletions(-) diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f73048d4f..f1c9c3e2f678 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe5d4b5..c9bae1362606 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a748aff..61f2a2a5099d 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce91..b7d61e7b8737 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -47,6 +47,8 @@ struct bcm63xx_spi { /* Platform data */ u32 speed_hz; unsigned fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; /* Data buffers */ const unsigned char *tx_ptr; @@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); if (t->rx_buf && t->tx_buf) - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); else if (t->rx_buf) - msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_R << bs->msg_type_shift); else if (t->tx_buf) - msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_W << bs->msg_type_shift); - bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + switch (bs->msg_ctl_width) { + case 8: + bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); + break; + case 16: + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + break; + } /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; @@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->transfer_one_message = bcm63xx_spi_transfer_one; master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; + bs->msg_type_shift = pdata->msg_type_shift; + bs->msg_ctl_width = pdata->msg_ctl_width; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + switch (bs->msg_ctl_width) { + case 8: + case 16: + break; + default: + dev_err(dev, "unsupported MSG_CTL width: %d\n", + bs->msg_ctl_width); + goto out_clk_disable; + } + /* Initialize hardware */ clk_enable(bs->clk); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); From cf9bfe55f24973a8f40e2c922a7e82cf09e486fd Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Tue, 14 Aug 2012 18:56:13 +0530 Subject: [PATCH 0685/1098] MIPS: Synchronize MIPS count one CPU at a time The current implementation of synchronise_count_{master,slave} blocks slave CPUs in early boot until all of them come up. This no longer works because blocking a CPU with interrupts off after notifying the CPU to be online causes problems with the current kernel. Specifically, after the workqueue changes (commit a08489c569dc1 "Pull workqueue changes from Tejun Heo") the CPU_ONLINE notification callback workqueue_cpu_up_callback() will hang on wait_for_completion(&idle_rebind.done), if the slave CPUs are blocked for synchronize_count_slave(). The changes are to update synchronize_count_{master,slave}() to handle one CPU at a time and to call synchronise_count_master() in __cpu_up() so that the CPU_ONLINE notification goes out only after the COP0 COUNT register is synchronized. [ralf@linux-mips.org: This matter only to those few platforms which are using the cp0 counter as their clocksource which are XLP, XLR and MIPS' CMP solution.] Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4216/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/r4k-timer.h | 8 ++++---- arch/mips/kernel/smp.c | 4 ++-- arch/mips/kernel/sync-r4k.c | 26 +++++++++++--------------- 3 files changed, 17 insertions(+), 21 deletions(-) diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b3b61c..afe9e0e03fe9 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8c8738..9005bf9fb859 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e411fd..7f1eca3858de 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ From 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 14 Aug 2012 21:12:21 +0200 Subject: [PATCH 0686/1098] MIPS: ath79: don't hardcode the unavailability of the DSP ASE The ath79 platform code allows to run a single kernel image on various SoCs which are based on the 24Kc and 74Kc cores. The current code explicitely disables the DSP ASE, but that is available in the 74Kc core. Remove the override in order to let the kernel to detect the availability of the DSP ASE at runtime. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4222/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa03bf36..6ddae926bf79 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 From 16cc2cf642eb73978a3ebde66dc94d24d46b4798 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 17 Aug 2012 10:45:27 +0200 Subject: [PATCH 0687/1098] MIPS: Malta: Delete duplicate PCI fixup. 2ec8663f9c03a96f2c328c7c483603c31d62ad37 (lmo) rsp. 497e5ff03f58583ada469db8a1aa34eced9dd63e (kernel.org) [MIPS: Malta: Move PIIX4 PCI fixup to where it belongs.] attempted to move this PCI fixup but really only added it at it's new location without deleting the old instance. Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-pci.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea54faf5..2147cb34e705 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); From 2ee38d4de5b0f1bd4ed9f0c830ae6949e39c18f0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Aug 2012 11:07:51 +0200 Subject: [PATCH 0688/1098] pinctrl/nomadik: fix null in irqdomain errorpath The irqdomain conversion failed to notice that we do not always have a DT node to dereference, fix this up by using a simple dev_err() that also tells the name of the device. Cc: Loic Pallardy Cc: Patrice Chotard Acked-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index ec6ac501b23a..3dde6537adb8 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1292,7 +1292,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) NOMADIK_GPIO_TO_IRQ(pdata->first_gpio), 0, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { - pr_err("%s: Failed to create irqdomain\n", np->full_name); + dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; goto out; } From d1a83d3b1729ac53ebcc6134f0d88faa311c42b9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 9 Aug 2012 21:02:19 +0200 Subject: [PATCH 0689/1098] Documentation/pinctrl.txt: Fix some misspelled macros Signed-off-by: Daniel Mack Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index e40f4b4e1977..1479aca23744 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = { static struct pinctrl_map __initdata mapping[] = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), - PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), + PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), }; Finally, some devices expect the mapping table to contain certain specific From ac5aa7f9e0891a115ab307b4bdde9c55b9232970 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 10 Aug 2012 16:52:58 +0200 Subject: [PATCH 0690/1098] pinctrl: header: trivial: declare struct device As struct device is used as a function argument, it should at least be declared (device.h is not included). Signed-off-by: Richard Genoud Signed-off-by: Linus Walleij --- include/linux/pinctrl/consumer.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 6dd96fb45482..e9b7f4350844 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -20,6 +20,7 @@ /* This struct is private to the core and should be regarded as a cookie */ struct pinctrl; struct pinctrl_state; +struct device; #ifdef CONFIG_PINCTRL From d599bfb324ad74e63b616809c1c13c76d1493cf9 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 10 Aug 2012 16:53:49 +0200 Subject: [PATCH 0691/1098] trivial: pinctrl core: remove extraneous code lines In function pinctrl_get_locked, pointer p is returned on error, and also return on no_error. So, we just return it with no error test. It's pretty the same in function pinctrl_lookup_state_locked: state is returned in every case, so we drop the error test and just return state. Signed-off-by: Richard Genoud --- drivers/pinctrl/core.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index fb7f3bebdc69..dc5c126e398a 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -657,11 +657,7 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev) if (p != NULL) return ERR_PTR(-EBUSY); - p = create_pinctrl(dev); - if (IS_ERR(p)) - return p; - - return p; + return create_pinctrl(dev); } /** @@ -738,11 +734,8 @@ static struct pinctrl_state *pinctrl_lookup_state_locked(struct pinctrl *p, dev_dbg(p->dev, "using pinctrl dummy state (%s)\n", name); state = create_state(p, name); - if (IS_ERR(state)) - return state; - } else { - return ERR_PTR(-ENODEV); - } + } else + state = ERR_PTR(-ENODEV); } return state; From b20fd25a947584cf949ad3066e41697c5cdad816 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Aug 2012 22:18:52 +0800 Subject: [PATCH 0692/1098] pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI The .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI should be 0x7bc rather than NO_PAD. This error will cause SD2 probe failure. Signed-off-by: Shawn Guo Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-imx51.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c index 689b3c88dd2e..9fd02162a3c2 100644 --- a/drivers/pinctrl/pinctrl-imx51.c +++ b/drivers/pinctrl/pinctrl-imx51.c @@ -974,7 +974,7 @@ static struct imx_pin_reg imx51_pin_regs[] = { IMX_PIN_REG(MX51_PAD_EIM_DA13, NO_PAD, 0x050, 0, 0x000, 0), /* MX51_PAD_EIM_DA13__EIM_DA13 */ IMX_PIN_REG(MX51_PAD_EIM_DA14, NO_PAD, 0x054, 0, 0x000, 0), /* MX51_PAD_EIM_DA14__EIM_DA14 */ IMX_PIN_REG(MX51_PAD_EIM_DA15, NO_PAD, 0x058, 0, 0x000, 0), /* MX51_PAD_EIM_DA15__EIM_DA15 */ - IMX_PIN_REG(MX51_PAD_SD2_CMD, NO_PAD, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ + IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 1, 0x9b0, 2), /* MX51_PAD_SD2_CMD__I2C1_SCL */ IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 0, 0x000, 0), /* MX51_PAD_SD2_CMD__SD2_CMD */ IMX_PIN_REG(MX51_PAD_SD2_CLK, 0x7c0, 0x3b8, 2, 0x914, 3), /* MX51_PAD_SD2_CLK__CSPI_SCLK */ From 4c39104da846379151b9c37cffaf8b00a5580229 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 10 Aug 2012 11:02:19 +0200 Subject: [PATCH 0693/1098] pinctrl/nomadik: add kp_b_2 keyboard function group list There is yet another way to mux the keyboard, so fix up that group. Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik-db8500.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c index 5f3e9d0221e1..a39fb7a6fc51 100644 --- a/drivers/pinctrl/pinctrl-nomadik-db8500.c +++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c @@ -505,6 +505,8 @@ static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1, DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2, DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 }; +static const unsigned kp_b_2_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1, + DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_F4, DB8500_PIN_E3}; static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8, @@ -662,6 +664,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = { DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B), + DB8500_PIN_GROUP(kp_b_2, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B), DB8500_PIN_GROUP(smcs1_b_1, NMK_GPIO_ALT_B), @@ -751,7 +754,7 @@ DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1"); DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1"); DB8500_FUNC_GROUPS(lcd, "lcdvsi0_a_1", "lcdvsi1_a_1", "lcd_d0_d7_a_1", "lcd_d8_d11_a_1", "lcd_d12_d23_a_1", "lcd_b_1"); -DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_c_1", "kp_oc1_1"); +DB8500_FUNC_GROUPS(kp, "kp_a_1", "kp_b_1", "kp_b_2", "kp_c_1", "kp_oc1_1"); DB8500_FUNC_GROUPS(mc2, "mc2_a_1", "mc2rstn_c_1"); DB8500_FUNC_GROUPS(ssp1, "ssp1_a_1"); DB8500_FUNC_GROUPS(ssp0, "ssp0_a_1"); From 97f50c6c415d84c612094d9514a3df3d70ab30e3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:27 +0100 Subject: [PATCH 0694/1098] ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' The platform attempts to register platform device 'snd_soc_u8500' which doesn't actually exist. Here we change the reference to the correct one 'snd_soc_mop500'. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-msp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 996048038743..df15646036aa 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, From 46a8b9837da20206c6daca11949485fab7b6e875 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:28 +0100 Subject: [PATCH 0695/1098] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled Previous attempts to add platform probing of the Audio related devices only call from non-DT initialisation functions. This patch extends that functionality to the Device Tree related ones too. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1c..a534d8880de1 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; From 7612bfeecc197bbb6629842b5c6ff1967f0a9b70 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 15 Aug 2012 11:41:55 -0700 Subject: [PATCH 0696/1098] Yama: access task_struct->comm directly The core ptrace access checking routine holds a task lock, and when reporting a failure, Yama takes a separate task lock. To avoid a potential deadlock with two ptracers taking the opposite locks, do not use get_task_comm() and just use ->comm directly since accuracy is not important for the report. Reported-by: Fengguang Wu Suggested-by: Oleg Nesterov CC: stable@vger.kernel.org Signed-off-by: Kees Cook Acked-by: John Johansen Signed-off-by: James Morris --- security/yama/yama_lsm.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c index d51b7c76c37d..0cc99a3ea42d 100644 --- a/security/yama/yama_lsm.c +++ b/security/yama/yama_lsm.c @@ -279,12 +279,9 @@ static int yama_ptrace_access_check(struct task_struct *child, } if (rc) { - char name[sizeof(current->comm)]; printk_ratelimited(KERN_NOTICE "ptrace of pid %d was attempted by: %s (pid %d)\n", - child->pid, - get_task_comm(name, current), - current->pid); + child->pid, current->comm, current->pid); } return rc; @@ -319,12 +316,9 @@ static int yama_ptrace_traceme(struct task_struct *parent) } if (rc) { - char name[sizeof(current->comm)]; printk_ratelimited(KERN_NOTICE "ptraceme of pid %d was attempted by: %s (pid %d)\n", - current->pid, - get_task_comm(name, parent), - parent->pid); + current->pid, parent->comm, parent->pid); } return rc; From dfeb86ecde7ae6ce15bd69a6a205b5e13aea8111 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 2 Aug 2012 12:32:42 +0530 Subject: [PATCH 0697/1098] pwm: Add missing static storage class specifiers in core.c file Fixes the following sparse warnings: drivers/pwm/core.c:152:6: warning: symbol 'of_pwmchip_add' was not declared. Should it be static? drivers/pwm/core.c:165:6: warning: symbol 'of_pwmchip_remove' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index ecb76909e946..4a8bdfa79e7f 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -149,7 +149,7 @@ static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, return pwm; } -void of_pwmchip_add(struct pwm_chip *chip) +static void of_pwmchip_add(struct pwm_chip *chip) { if (!chip->dev || !chip->dev->of_node) return; @@ -162,7 +162,7 @@ void of_pwmchip_add(struct pwm_chip *chip) of_node_get(chip->dev->of_node); } -void of_pwmchip_remove(struct pwm_chip *chip) +static void of_pwmchip_remove(struct pwm_chip *chip) { if (chip->dev && chip->dev->of_node) of_node_put(chip->dev->of_node); From ecefeb79218064bf011c5d3ff25322ffa60c302c Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 2 Aug 2012 17:55:54 +0900 Subject: [PATCH 0698/1098] pwm: samsung: add missing device pointer to struct pwm_chip This patch adds missing device pointer to struct pwm_chip. If the device pointer is NULL, pwmchip_add() will return error. Signed-off-by: Jingoo Han Signed-off-by: Thierry Reding --- drivers/pwm/pwm-samsung.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index d10386528c9c..e5187c0ade9f 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -225,6 +225,7 @@ static int s3c_pwm_probe(struct platform_device *pdev) /* calculate base of control bits in TCON */ s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4; + s3c->chip.dev = &pdev->dev; s3c->chip.ops = &s3c_pwm_ops; s3c->chip.base = -1; s3c->chip.npwm = 1; From 2ffdc9a64824a373d09f3417ae4377ec83cd9d16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 3 Aug 2012 21:43:54 +0800 Subject: [PATCH 0699/1098] pwm: Remove a redundant error message when devm_request_and_ioremap fails The implementation in devm_request_and_ioremap() already shows error message, so no need to show dev_err again if devm_request_and_ioremap() fails. Signed-off-by: Axel Lin Cc: Stephen Warren Cc: Philip, Avinash Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 4 +--- drivers/pwm/pwm-tiecap.c | 4 +--- drivers/pwm/pwm-tiehrpwm.c | 4 +--- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 02ce18d5e49a..057465e0553c 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -187,10 +187,8 @@ static int tegra_pwm_probe(struct platform_device *pdev) } pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pwm->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() region\n"); + if (!pwm->mmio_base) return -EADDRNOTAVAIL; - } platform_set_drvdata(pdev, pwm); diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 3c2ad284ee3e..0b66d0f25922 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -192,10 +192,8 @@ static int __devinit ecap_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 010d232cb0c8..c3756d1be194 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -371,10 +371,8 @@ static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev) } pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r); - if (!pc->mmio_base) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); + if (!pc->mmio_base) return -EADDRNOTAVAIL; - } ret = pwmchip_add(&pc->chip); if (ret < 0) { From eba7cbe5d8bbc3bc24f46973e44f1566f81d1f56 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 10 Aug 2012 10:12:09 +0530 Subject: [PATCH 0700/1098] pwm: vt8500: Fix coding style issue Fixes the following: WARNING: Prefer pr_warn(... to pr_warning(... pr_warning("Waiting for status bits 0x%x to clear timed out\n", Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/pwm-vt8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 548021439f0c..ad14389b7144 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -41,7 +41,7 @@ static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask) cpu_relax(); if (unlikely(!loops)) - pr_warning("Waiting for status bits 0x%x to clear timed out\n", + pr_warn("Waiting for status bits 0x%x to clear timed out\n", bitmask); } From e50d3523ff45646a48666ebbd3d8aeb0c75084ed Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 10 Aug 2012 16:41:13 +0530 Subject: [PATCH 0701/1098] pwm: core: Fix coding style issues Fixes the following: WARNING: line over 80 characters ERROR: spaces required around that ':' (ctx:VxW) WARNING: Prefer pr_warn(... to pr_warning(... Signed-off-by: Sachin Kamat Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 4a8bdfa79e7f..c6e05078d3ad 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -129,8 +129,8 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label) return 0; } -static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc, - const struct of_phandle_args *args) +static struct pwm_device * +of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) { struct pwm_device *pwm; @@ -527,7 +527,7 @@ void __init pwm_add_table(struct pwm_lookup *table, size_t num) struct pwm_device *pwm_get(struct device *dev, const char *con_id) { struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER); - const char *dev_id = dev ? dev_name(dev): NULL; + const char *dev_id = dev ? dev_name(dev) : NULL; struct pwm_chip *chip = NULL; unsigned int index = 0; unsigned int best = 0; @@ -609,7 +609,7 @@ void pwm_put(struct pwm_device *pwm) mutex_lock(&pwm_lock); if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) { - pr_warning("PWM device already freed\n"); + pr_warn("PWM device already freed\n"); goto out; } From 7a4c5de27efa4c2ecca87af0a3deea63446367e2 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 10 Aug 2012 13:57:52 -0400 Subject: [PATCH 0702/1098] ext4: don't call ext4_error while block group is locked While in ext4_validate_block_bitmap(), if an block allocation bitmap is found to be invalid, we call ext4_error() while the block group is still locked. This causes ext4_commit_super() to call a function which might sleep while in an atomic context. There's no need to keep the block group locked at this point, so hoist the ext4_error() call up to ext4_validate_block_bitmap() and release the block group spinlock before calling ext4_error(). The reported stack trace can be found at: http://article.gmane.org/gmane.comp.file-systems.ext4/33731 Reported-by: Dave Jones Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/balloc.c | 62 +++++++++++++++++++++++++++++------------------- fs/ext4/bitmap.c | 1 - 2 files changed, 37 insertions(+), 26 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index d23b31ca9d7a..1b5089067d01 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -280,14 +280,18 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb, return desc; } -static int ext4_valid_block_bitmap(struct super_block *sb, - struct ext4_group_desc *desc, - unsigned int block_group, - struct buffer_head *bh) +/* + * Return the block number which was discovered to be invalid, or 0 if + * the block bitmap is valid. + */ +static ext4_fsblk_t ext4_valid_block_bitmap(struct super_block *sb, + struct ext4_group_desc *desc, + unsigned int block_group, + struct buffer_head *bh) { ext4_grpblk_t offset; ext4_grpblk_t next_zero_bit; - ext4_fsblk_t bitmap_blk; + ext4_fsblk_t blk; ext4_fsblk_t group_first_block; if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) { @@ -297,37 +301,33 @@ static int ext4_valid_block_bitmap(struct super_block *sb, * or it has to also read the block group where the bitmaps * are located to verify they are set. */ - return 1; + return 0; } group_first_block = ext4_group_first_block_no(sb, block_group); /* check whether block bitmap block number is set */ - bitmap_blk = ext4_block_bitmap(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_block_bitmap(sb, desc); + offset = blk - group_first_block; if (!ext4_test_bit(offset, bh->b_data)) /* bad block bitmap */ - goto err_out; + return blk; /* check whether the inode bitmap block number is set */ - bitmap_blk = ext4_inode_bitmap(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_inode_bitmap(sb, desc); + offset = blk - group_first_block; if (!ext4_test_bit(offset, bh->b_data)) /* bad block bitmap */ - goto err_out; + return blk; /* check whether the inode table block number is set */ - bitmap_blk = ext4_inode_table(sb, desc); - offset = bitmap_blk - group_first_block; + blk = ext4_inode_table(sb, desc); + offset = blk - group_first_block; next_zero_bit = ext4_find_next_zero_bit(bh->b_data, offset + EXT4_SB(sb)->s_itb_per_group, offset); - if (next_zero_bit >= offset + EXT4_SB(sb)->s_itb_per_group) - /* good bitmap for inode tables */ - return 1; - -err_out: - ext4_error(sb, "Invalid block bitmap - block_group = %d, block = %llu", - block_group, bitmap_blk); + if (next_zero_bit < offset + EXT4_SB(sb)->s_itb_per_group) + /* bad bitmap for inode tables */ + return blk; return 0; } @@ -336,14 +336,26 @@ void ext4_validate_block_bitmap(struct super_block *sb, unsigned int block_group, struct buffer_head *bh) { + ext4_fsblk_t blk; + if (buffer_verified(bh)) return; ext4_lock_group(sb, block_group); - if (ext4_valid_block_bitmap(sb, desc, block_group, bh) && - ext4_block_bitmap_csum_verify(sb, block_group, desc, bh, - EXT4_BLOCKS_PER_GROUP(sb) / 8)) - set_buffer_verified(bh); + blk = ext4_valid_block_bitmap(sb, desc, block_group, bh); + if (unlikely(blk != 0)) { + ext4_unlock_group(sb, block_group); + ext4_error(sb, "bg %u: block %llu: invalid block bitmap", + block_group, blk); + return; + } + if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group, + desc, bh, EXT4_BLOCKS_PER_GROUP(sb) / 8))) { + ext4_unlock_group(sb, block_group); + ext4_error(sb, "bg %u: bad block bitmap checksum", block_group); + return; + } + set_buffer_verified(bh); ext4_unlock_group(sb, block_group); } diff --git a/fs/ext4/bitmap.c b/fs/ext4/bitmap.c index f8716eab9995..5c2d1813ebe9 100644 --- a/fs/ext4/bitmap.c +++ b/fs/ext4/bitmap.c @@ -79,7 +79,6 @@ int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group, if (provided == calculated) return 1; - ext4_error(sb, "Bad block bitmap checksum: block_group = %u", group); return 0; } From 0548bbb85337e532ca2ed697c3e9b227ff2ed4b4 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 16 Aug 2012 11:59:04 -0400 Subject: [PATCH 0703/1098] ext4: fix long mount times on very big file systems Commit 8aeb00ff85a: "ext4: fix overhead calculation used by ext4_statfs()" introduced a O(n**2) calculation which makes very large file systems take forever to mount. Fix this with an optimization for non-bigalloc file systems. (For bigalloc file systems the overhead needs to be set in the the superblock.) Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/super.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 56bcaec9149c..598498904035 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3120,6 +3120,10 @@ static int count_overhead(struct super_block *sb, ext4_group_t grp, ext4_group_t i, ngroups = ext4_get_groups_count(sb); int s, j, count = 0; + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC)) + return (ext4_bg_has_super(sb, grp) + ext4_bg_num_gdb(sb, grp) + + sbi->s_itb_per_group + 2); + first_block = le32_to_cpu(sbi->s_es->s_first_data_block) + (grp * EXT4_BLOCKS_PER_GROUP(sb)); last_block = first_block + EXT4_BLOCKS_PER_GROUP(sb) - 1; From 250a41e0ecc433cdd553a364d0fc74c766425209 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 09:27:35 -0400 Subject: [PATCH 0704/1098] xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID. If P2M leaf is completly packed with INVALID_P2M_ENTRY or with 1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf with either a p2m_missing or p2m_identity respectively. The old page (which was created via extend_brk or was grafted on from the mfn_list) can be re-used for setting new PFNs. This also means we can remove git commit: 5bc6f9888db5739abfa0cae279b4b442e4db8049 xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back which tried to fix this. and make the amount that is required to be reserved much smaller. CC: stable@vger.kernel.org # for 3.5 only. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 95 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 92 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index b2e91d40a4cb..d4b255463253 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. - * But some machines can have 3GB I/O holes even. So lets reserve enough - * for 4GB of I/O and E820 holes. */ -RESERVE_BRK(p2m_populated, PMD_SIZE * 4); + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; From 89a4e48f8479f8145eca9698f39fe188c982212f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 17 Aug 2012 08:54:52 -0400 Subject: [PATCH 0705/1098] ext4: fix kernel BUG on large-scale rm -rf commands MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 968dee7722: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [] ? __ext4_handle_dirty_metadata+0x83/0x110 [] ext4_ext_truncate+0x193/0x1d0 [] ? ext4_mark_inode_dirty+0x7f/0x1f0 [] ext4_truncate+0xf5/0x100 [] ext4_evict_inode+0x461/0x490 [] evict+0xa2/0x1a0 [] iput+0x103/0x1f0 [] do_unlinkat+0x154/0x1c0 [] ? sys_newfstatat+0x2a/0x40 [] sys_unlinkat+0x1b/0x50 [] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee7722 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by: Maciej Żenczykowski Reported-by: Marti Raudsepp Tested-by: Fengguang Wu Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/extents.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index cd0c7ed06772..aabbb3f53683 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2662,6 +2662,7 @@ cont: } path[0].p_depth = depth; path[0].p_hdr = ext_inode_hdr(inode); + i = 0; if (ext4_ext_check(inode, path[0].p_hdr, depth)) { err = -EIO; From d807ff838f48e7778996e577e2a57a5796c32e84 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Fri, 17 Aug 2012 11:09:04 +0800 Subject: [PATCH 0706/1098] autofs4 - fix expire check In some cases when an autofs indirect mount is contained in a file system that is marked as shared (such as when systemd does the equivalent of "mount --make-rshared /" early in the boot), mounts stop expiring. When this happens the first expiry check on a mountpoint dentry in autofs_expire_indirect() sees a mountpoint dentry with a higher than minimal reference count. Consequently the dentry is condidered busy and the actual expiry check is never done. This particular check was originally meant as an optimisation to detect a path walk in progress but with the addition of rcu-walk it can be ineffective anyway. Removing the test allows automounts to expire again since the actual expire check doesn't rely on the dentry reference count. Signed-off-by: Ian Kent Signed-off-by: Linus Torvalds --- fs/autofs4/expire.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 8c0e56d92938..842d00048a65 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -399,11 +399,6 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb, DPRINTK("checking mountpoint %p %.*s", dentry, (int)dentry->d_name.len, dentry->d_name.name); - /* Path walk currently on this dentry? */ - ino_count = atomic_read(&ino->count) + 2; - if (dentry->d_count > ino_count) - goto next; - /* Can we umount this guy */ if (autofs4_mount_busy(mnt, dentry)) goto next; From 127c6e731106a2071ee4a6c5a34c471cd3e719f0 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Tue, 7 Aug 2012 09:59:40 +0800 Subject: [PATCH 0707/1098] booke/wdt: some ioctls do not return values properly Fix some booke wdt ioctls return value error. Signed-off-by: Tiejun Chen Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- drivers/watchdog/booke_wdt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 3fe82d0e8caa..5b06d31ab6a9 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -166,18 +166,17 @@ static long booke_wdt_ioctl(struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((void *)arg, &ident, sizeof(ident))) - return -EFAULT; + return copy_to_user(p, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: return put_user(0, p); case WDIOC_GETBOOTSTATUS: /* XXX: something is clearing TSR */ tmp = mfspr(SPRN_TSR) & TSR_WRS(3); /* returns CARDRESET if last reset was caused by the WDT */ - return (tmp ? WDIOF_CARDRESET : 0); + return put_user((tmp ? WDIOF_CARDRESET : 0), p); case WDIOC_SETOPTIONS: if (get_user(tmp, p)) - return -EINVAL; + return -EFAULT; if (tmp == WDIOS_ENABLECARD) { booke_wdt_ping(); break; From 0df7c0e3a73f5d12bca24d81ee5ed52947b372b6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Aug 2012 16:23:20 -0700 Subject: [PATCH 0708/1098] scripts/kernel-doc: fix fatal script error Fix fatal error in scripts/kernel-doc by ignoring the "__weak" attribute: Error(drivers/pci/pci.c:2820): cannot understand prototype: 'char * __weak pcibios_setup(char *str) ' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 9b0c0b8b4ab4..8fd107a3fac4 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1786,6 +1786,7 @@ sub dump_function($$) { $prototype =~ s/__init +//; $prototype =~ s/__init_or_module +//; $prototype =~ s/__must_check +//; + $prototype =~ s/__weak +//; $prototype =~ s/^#\s*define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; From bbb4ab43f82adf02c8b4d0d7e7b7e79d24204b05 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 17 Aug 2012 09:51:50 -0500 Subject: [PATCH 0709/1098] ahci: un-staticize ahci_dev_classify Make ahci_dev_classify available to the ahci platform driver for custom hard reset function. Signed-off-by: Rob Herring Signed-off-by: Jeff Garzik --- drivers/ata/ahci.h | 1 + drivers/ata/libahci.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index c2594ddf25b0..57eb1c212a4c 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -320,6 +320,7 @@ extern struct device_attribute *ahci_sdev_attrs[]; extern struct ata_port_operations ahci_ops; extern struct ata_port_operations ahci_pmp_retry_srst_ops; +unsigned int ahci_dev_classify(struct ata_port *ap); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); void ahci_save_initial_config(struct device *dev, diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index f9eaa82311a9..555c07afa05b 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1139,7 +1139,7 @@ static void ahci_dev_config(struct ata_device *dev) } } -static unsigned int ahci_dev_classify(struct ata_port *ap) +unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ata_taskfile tf; @@ -1153,6 +1153,7 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } +EXPORT_SYMBOL_GPL(ahci_dev_classify); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts) From 1117c811a64d948c9f88ee80a0c7f35e9fea1d69 Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Fri, 17 Aug 2012 10:11:15 +0200 Subject: [PATCH 0710/1098] pata_atiixp: override cable detection on MSI E350DM-E33 The mainboard MSI E350DM-E33 is advertised with 6 SATA ports. As it turns out, two of them seem to be driven by on-board SATA<->PATA converters. If a disk drive is connected to one of them kernel uses UDMA/33 mode due to cable detection: [ 34.550823] scsi4 : pata_atiixp [ 34.555517] scsi5 : pata_atiixp [ 34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14 [ 34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15 ... [ 35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable [ 35.049166] ata5.00: configured for UDMA/33 [ 35.049402] scsi 4:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 This patch forces "short cable" mode on this board, as it seems clear that the on-board SATA<->PATA "cable" is short. With this patch the disk is configured for UDMA/100: [ 5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.024787] ata5.00: configured for UDMA/100 Testing revealed no transfer issues. Signed-off-by: Arnd Hannemann Signed-off-by: Jeff Garzik --- drivers/ata/pata_atiixp.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 361c75cea57b..24e51056ac26 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRV_NAME "pata_atiixp" #define DRV_VERSION "0.4.6" @@ -33,11 +34,26 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + static int atiixp_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 udma; + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + /* Hack from drivers/ide/pci. Really we want to know how to do the raw detection not play follow the bios mode guess */ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); From 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:02:31 -0700 Subject: [PATCH 0711/1098] ahci: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 062e6a1a248f..50d5dea0ff59 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -256,6 +256,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, From 389cd784969e9148fedcde0608f15bd74d6b769e Mon Sep 17 00:00:00 2001 From: James Ralston Date: Thu, 9 Aug 2012 09:34:20 -0700 Subject: [PATCH 0712/1098] ata_piix: Add Device IDs for Intel Lynx Point-LP PCH This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3c809bfbccf5..ef773e12af79 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (DH89xxCC) */ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ From 834009170986f295c5eca37c76c59f1b28670d69 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Wed, 15 Aug 2012 17:08:12 +0800 Subject: [PATCH 0713/1098] [libata] acpi: call ata_acpi_gtm during ata port init time Commit 30dcf76acc695cbd2fa919e294670fe9552e16e7 mistakenly dropped the code to get an initial gtm for the IDE channel. This caused the following problem for Sergei: http://marc.info/?l=linux-kernel&m=134484963618457&w=2 Fix this by adding the call back in ata_acpi_bind_host, and due to this, the ata_ap_acpi_handle is modified accordingly. Tested-by: Sergei Trofimovich Signed-off-by: Aaron Lu Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 902b5a457170..fd9ecf74e631 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -60,17 +60,7 @@ acpi_handle ata_ap_acpi_handle(struct ata_port *ap) if (ap->flags & ATA_FLAG_ACPI_SATA) return NULL; - /* - * If acpi bind operation has already happened, we can get the handle - * for the port by checking the corresponding scsi_host device's - * firmware node, otherwise we will need to find out the handle from - * its parent's acpi node. - */ - if (ap->scsi_host) - return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev); - else - return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), - ap->port_no); + return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), ap->port_no); } EXPORT_SYMBOL(ata_ap_acpi_handle); @@ -1101,6 +1091,9 @@ static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle) if (!*handle) return -ENODEV; + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + return 0; } From ebd600281566ab40fb2e3004af7eacb3375626d1 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Sun, 12 Aug 2012 23:43:42 +0200 Subject: [PATCH 0714/1098] [libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building Linux for an ASUS Eee PC 701 4G with ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 ata2.00: 7815024 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 I followed the advice to not use the deprecated old PATA subsystem ATA/ATAPI/MFM/RLL support (DEPRECATED) ---> and use the ATA subsystem instead. Serial ATA and Parallel ATA drivers ---> Unfortunately I needed several tries to find out, that I needed the SFF menu I had not selected before because I had never heard that term before. I think it would have helped me, to have PATA or legacy IDE in that item’s name. Signed-off-by: Paul Menzel Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2be8ef1d3093..27cecd313e75 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -115,7 +115,7 @@ config SATA_SIL24 If unsure, say N. config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF From 7f321c26c04807834fef4c524d2b21573423fc74 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:31:45 +0200 Subject: [PATCH 0715/1098] PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 59894873a3b3..9891a8559203 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -584,6 +584,7 @@ static int rpm_resume(struct device *dev, int rpmflags) || dev->parent->power.runtime_status == RPM_ACTIVE) { atomic_inc(&dev->parent->power.child_count); spin_unlock(&dev->parent->power.lock); + retval = 1; goto no_callback; /* Assume success. */ } spin_unlock(&dev->parent->power.lock); @@ -664,7 +665,7 @@ static int rpm_resume(struct device *dev, int rpmflags) } wake_up_all(&dev->power.wait_queue); - if (!retval) + if (retval >= 0) rpm_idle(dev, RPM_ASYNC); out: From 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:31:55 +0200 Subject: [PATCH 0716/1098] PM / Runtime: Clear power.deferred_resume on success in rpm_suspend() The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 9891a8559203..b6e9d9b7982d 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -388,7 +388,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto repeat; } - dev->power.deferred_resume = false; if (dev->power.no_callbacks) goto no_callback; /* Assume success. */ @@ -440,6 +439,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) wake_up_all(&dev->power.wait_queue); if (dev->power.deferred_resume) { + dev->power.deferred_resume = false; rpm_resume(dev, 0); retval = -EAGAIN; goto out; From 55d7ec4520e86d735d178c15d7df33d507bd43c6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 15 Aug 2012 21:32:04 +0200 Subject: [PATCH 0717/1098] PM / Runtime: Check device PM QoS setting before "no callbacks" check If __dev_pm_qos_read_value(dev) returns a negative value, rpm_suspend() should return -EPERM for dev even if its power.no_callbacks flag is set. For this to happen, the device's power.no_callbacks flag has to be checked after the PM QoS check, so move the PM QoS check to rpm_check_suspend_allowed() (this will make it cover idle notifications as well as runtime suspend too). Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/base/power/runtime.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index b6e9d9b7982d..7d9c1cb1c39a 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -147,6 +147,8 @@ static int rpm_check_suspend_allowed(struct device *dev) || (dev->power.request_pending && dev->power.request == RPM_REQ_RESUME)) retval = -EAGAIN; + else if (__dev_pm_qos_read_value(dev) < 0) + retval = -EPERM; else if (dev->power.runtime_status == RPM_SUSPENDED) retval = 1; @@ -402,12 +404,6 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } - if (__dev_pm_qos_read_value(dev) < 0) { - /* Negative PM QoS constraint means "never suspend". */ - retval = -EPERM; - goto out; - } - __update_runtime_status(dev, RPM_SUSPENDING); if (dev->pm_domain) From 04d0f1b84927169cdaa4e3a24da768a9fd9aca6f Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 17 Aug 2012 13:36:59 -0400 Subject: [PATCH 0718/1098] [libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro Michael Eitelwein writes: I have an external SATA drive that was slowed down by bridge limits. I found a solution in a thread on this list posted in 2008: It introduces whitelist entries in libata-core.c for devices with well working bridges (e.g. email on Fri, 31 Oct 2008 01:45:27 -0400). I added my device to this whitelist in a custom built kernel and it works fine for weeks now. How can I have this device added on the whitelist within the official kernel? Is this whitelist mechanism still supported or is there a smarter way to achieve whitelisting? I added the following whitelist entry for my Buffalo DriveStation Quattro "BUFFALO HD-QSU2/R5": /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, Reported-by: Michael Eitelwein Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fadd5866d40f..5eee1c1537d2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4128,6 +4128,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, From 63c6ba4352009a5f85b32307c001abeb5baebd28 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 15 Aug 2012 22:10:50 +0200 Subject: [PATCH 0719/1098] cpuidle: coupled: fix sleeping while atomic in cpu notifier The cpu hotplug notifier gets called in both atomic and non-atomic contexts, it is not always safe to lock a mutex. Filter out all events except the six necessary ones, which are all sleepable, before taking the mutex. Signed-off-by: Colin Cross Reviewed-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/coupled.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index 2c9bf2692232..c24dda03c143 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -678,6 +678,18 @@ static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, int cpu = (unsigned long)hcpu; struct cpuidle_device *dev; + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_UP_PREPARE: + case CPU_DOWN_PREPARE: + case CPU_ONLINE: + case CPU_DEAD: + case CPU_UP_CANCELED: + case CPU_DOWN_FAILED: + break; + default: + return NOTIFY_OK; + } + mutex_lock(&cpuidle_lock); dev = per_cpu(cpuidle_devices, cpu); From 5fbbb90dfdedb9a258550e4e5debd3013266372e Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Wed, 15 Aug 2012 22:11:00 +0200 Subject: [PATCH 0720/1098] cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify When a kernel is built to support multiple hardware types it's possible that CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is set but the hardware the kernel is run on doesn't support cpuidle and therefore doesn't load a driver for it. In this case, when the system is shut down, cpuidle_coupled_cpu_notify() gets called with cpuidle_devices set to NULL. There are quite possibly other circumstances where this situation can also occur and we should check for it. Signed-off-by: Jon Medhurst Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/coupled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index c24dda03c143..3265844839bf 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -693,7 +693,7 @@ static int cpuidle_coupled_cpu_notify(struct notifier_block *nb, mutex_lock(&cpuidle_lock); dev = per_cpu(cpuidle_devices, cpu); - if (!dev->coupled) + if (!dev || !dev->coupled) goto out; switch (action & ~CPU_TASKS_FROZEN) { From 3735d524da64b70b41c764359da36f88aded3610 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Aug 2012 22:06:55 +0200 Subject: [PATCH 0721/1098] intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it. If the machine is booted without any cpu_idle driver set (b/c disable_cpuidle() has been called) we should follow other users of cpu_idle API and check the return value for NULL before using it. Reported-and-tested-by: Mark van Dijk Suggested-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index f559088869f6..e8726177d103 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -606,8 +606,9 @@ static int __init intel_idle_init(void) intel_idle_cpuidle_driver_init(); retval = cpuidle_register_driver(&intel_idle_driver); if (retval) { + struct cpuidle_driver *drv = cpuidle_get_driver(); printk(KERN_DEBUG PREFIX "intel_idle yielding to %s", - cpuidle_get_driver()->name); + drv ? drv->name : "none"); return retval; } From 60916a9382e88fbf5e54fd36a3e658efd7ab7bed Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:14:14 +0100 Subject: [PATCH 0722/1098] tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1 syscall_get_nr can return -1 in the case that the task is not executing a system call. This patch fixes perf_syscall_{enter,exit} to check that the syscall number is valid before using it as an index into a bitmap. Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com Cc: Jason Baron Cc: Wade Farnsworth Cc: Frederic Weisbecker Signed-off-by: Will Deacon Signed-off-by: Steven Rostedt --- kernel/trace/trace_syscalls.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index 60e4d7875672..6b245f64c8dd 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -506,6 +506,8 @@ static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_enter_syscalls)) return; @@ -580,6 +582,8 @@ static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_exit_syscalls)) return; From 7e30ed6bdd91ae73c34fc37b57fcccc8640641f9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 12:47:00 -0400 Subject: [PATCH 0723/1098] gmux: Add generic write32 function Move the special-cased backlight update function to a generic gmux_write32 function. Signed-off-by: Matthew Garrett Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 905fa01ac8df..c9db50729f6f 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -75,6 +75,18 @@ static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) return inl(gmux_data->iostart + port); } +static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, port + i); + } +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -90,16 +102,7 @@ static int gmux_update_status(struct backlight_device *bd) if (bd->props.state & BL_CORE_SUSPENDED) return 0; - /* - * Older gmux versions require writing out lower bytes first then - * setting the upper byte to 0 to flush the values. Newer versions - * accept a single u32 write, but the old method also works, so we - * just use the old method for all gmux versions. - */ - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 1, brightness >> 8); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 2, brightness >> 16); - gmux_write8(gmux_data, GMUX_PORT_BRIGHTNESS + 3, 0); + gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); return 0; } From 96ff705638e3d61b1e45a047c0f9f3bb622fa32f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 9 Aug 2012 13:45:01 -0400 Subject: [PATCH 0724/1098] apple_gmux: Add support for newer hardware New gmux devices have a different method for accessing the registers. Update the driver to cope. Incorporates feedback from Bernhard Froemel. Signed-off-by: Matthew Garrett Cc: Bernhard Froemel Cc: Seth Forshee --- drivers/platform/x86/apple-gmux.c | 179 +++++++++++++++++++++++++++--- 1 file changed, 165 insertions(+), 14 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index c9db50729f6f..0d140e1879e7 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -18,12 +18,15 @@ #include #include #include +#include #include #include struct apple_gmux_data { unsigned long iostart; unsigned long iolen; + bool indexed; + struct mutex index_lock; struct backlight_device *bdev; }; @@ -45,6 +48,9 @@ struct apple_gmux_data { #define GMUX_PORT_DISCRETE_POWER 0x50 #define GMUX_PORT_MAX_BRIGHTNESS 0x70 #define GMUX_PORT_BRIGHTNESS 0x74 +#define GMUX_PORT_VALUE 0xc2 +#define GMUX_PORT_READ 0xd0 +#define GMUX_PORT_WRITE 0xd4 #define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4) @@ -59,24 +65,24 @@ struct apple_gmux_data { #define GMUX_BRIGHTNESS_MASK 0x00ffffff #define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK -static inline u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port) { return inb(gmux_data->iostart + port); } -static inline void gmux_write8(struct apple_gmux_data *gmux_data, int port, +static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port, u8 val) { outb(val, gmux_data->iostart + port); } -static inline u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port) { return inl(gmux_data->iostart + port); } -static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, - u32 val) +static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) { int i; u8 tmpval; @@ -87,6 +93,144 @@ static inline u32 gmux_write32(struct apple_gmux_data *gmux_data, int port, } } +static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && (gwr & 0x01)) { + inb(gmux_data->iostart + GMUX_PORT_READ); + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + return !!i; +} + +static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data) +{ + int i = 200; + u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + + while (i && !(gwr & 0x01)) { + gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); + udelay(100); + i--; + } + + if (gwr & 0x01) + inb(gmux_data->iostart + GMUX_PORT_READ); + + return !!i; +} + +static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) +{ + u8 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inb(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port, + u8 val) +{ + mutex_lock(&gmux_data->index_lock); + outb(val, gmux_data->iostart + GMUX_PORT_VALUE); + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) +{ + u32 val; + + mutex_lock(&gmux_data->index_lock); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_ready(gmux_data); + val = inl(gmux_data->iostart + GMUX_PORT_VALUE); + mutex_unlock(&gmux_data->index_lock); + + return val; +} + +static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + int i; + u8 tmpval; + + mutex_lock(&gmux_data->index_lock); + + for (i = 0; i < 4; i++) { + tmpval = (val >> (i * 8)) & 0xff; + outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i); + } + + gmux_index_wait_ready(gmux_data); + outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); + gmux_index_wait_complete(gmux_data); + mutex_unlock(&gmux_data->index_lock); +} + +static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read8(gmux_data, port); + else + return gmux_pio_read8(gmux_data, port); +} + +static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) +{ + if (gmux_data->indexed) + gmux_index_write8(gmux_data, port, val); + else + gmux_pio_write8(gmux_data, port, val); +} + +static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) +{ + if (gmux_data->indexed) + return gmux_index_read32(gmux_data, port); + else + return gmux_pio_read32(gmux_data, port); +} + +static void gmux_write32(struct apple_gmux_data *gmux_data, int port, + u32 val) +{ + if (gmux_data->indexed) + gmux_index_write32(gmux_data, port, val); + else + gmux_pio_write32(gmux_data, port, val); +} + +static bool gmux_is_indexed(struct apple_gmux_data *gmux_data) +{ + u16 val; + + outb(0xaa, gmux_data->iostart + 0xcc); + outb(0x55, gmux_data->iostart + 0xcd); + outb(0x00, gmux_data->iostart + 0xce); + + val = inb(gmux_data->iostart + 0xcc) | + (inb(gmux_data->iostart + 0xcd) << 8); + + if (val == 0x55aa) + return true; + + return false; +} + static int gmux_get_brightness(struct backlight_device *bd) { struct apple_gmux_data *gmux_data = bl_get_data(bd); @@ -150,22 +294,29 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, } /* - * On some machines the gmux is in ACPI even thought the machine - * doesn't really have a gmux. Check for invalid version information - * to detect this. + * Invalid version information may indicate either that the gmux + * device isn't present or that it's a new one that uses indexed + * io */ + ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { - pr_info("gmux device not present\n"); - ret = -ENODEV; - goto err_release; + if (gmux_is_indexed(gmux_data)) { + mutex_init(&gmux_data->index_lock); + gmux_data->indexed = true; + } else { + pr_info("gmux device not present\n"); + ret = -ENODEV; + goto err_release; + } + pr_info("Found indexed gmux\n"); + } else { + pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, + ver_release); } - pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, - ver_release); - memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); From 9f6f955ae4994dd4ad5513a0d959468763a45fa5 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 17 Aug 2012 16:57:20 -0400 Subject: [PATCH 0725/1098] apple_gmux: Fix ACPI video unregister We were only calling acpi_video_unregister() if ACPI video support was built in, not if it was a module. Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 0d140e1879e7..85e1bfbd1121 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -348,7 +348,7 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, * Disable the other backlight choices. */ acpi_video_dmi_promote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_unregister(); #endif apple_bl_unregister(); @@ -371,7 +371,7 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) kfree(gmux_data); acpi_video_dmi_demote_vendor(); -#ifdef CONFIG_ACPI_VIDEO +#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_register(); #endif apple_bl_register(); From a50bd128f28cf81c1250874fc53728e113f12957 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 26 Jul 2012 17:13:31 +0800 Subject: [PATCH 0726/1098] asus-wmi: record wlan status while controlled by userapp MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the user bit is set, that mean BIOS can't set and record the wlan status, it will report the value read from id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while we query the wlan status by id ASUS_WMI_DEVID_WLAN (0x00010011) through WMI. So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while setting the wlan status through WMI. This is also the behavior that windows app will do. Quote from ASUS application engineer === When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return (1) 0x00050001 (On) (2) 0x00050000 (Off) (3) 0x00030001 (On) (4) 0x00030000 (Off) (5) 0x00000002 (Unknown) (1), (2) means that the model has hardware GPIO for WLAN, you can call WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off. (3), (4) means that the model doesn’t have hardware GPIO, you need to use API or driver library to turn WLAN on/off, and call WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status. After you set WLAN LED status, you can see the WLAN status is changed with WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly (ex: Windows), you can use it for synchronization. (5) means that the model doesn’t have WLAN device. WLAN is the ONLY special case with upper rule. For other device, like Bluetooth, you just need use WMIMethod(DSTS, 0x00010013) to get, and WMIMethod(DEVS, 0x00010013, 1 or 0) to set. === Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-wmi.c | 21 ++++++++++++++++++++- drivers/platform/x86/asus-wmi.h | 1 + 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index c7a36f6b0580..2eb9fe8e8efd 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -101,6 +101,7 @@ MODULE_LICENSE("GPL"); #define ASUS_WMI_DEVID_WIRELESS_LED 0x00010002 #define ASUS_WMI_DEVID_CWAP 0x00010003 #define ASUS_WMI_DEVID_WLAN 0x00010011 +#define ASUS_WMI_DEVID_WLAN_LED 0x00010012 #define ASUS_WMI_DEVID_BLUETOOTH 0x00010013 #define ASUS_WMI_DEVID_GPS 0x00010015 #define ASUS_WMI_DEVID_WIMAX 0x00010017 @@ -731,8 +732,21 @@ static int asus_rfkill_set(void *data, bool blocked) { struct asus_rfkill *priv = data; u32 ctrl_param = !blocked; + u32 dev_id = priv->dev_id; - return asus_wmi_set_devstate(priv->dev_id, ctrl_param, NULL); + /* + * If the user bit is set, BIOS can't set and record the wlan status, + * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED + * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). + * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED + * while setting the wlan status through WMI. + * This is also the behavior that windows app will do. + */ + if ((dev_id == ASUS_WMI_DEVID_WLAN) && + priv->asus->driver->wlan_ctrl_by_user) + dev_id = ASUS_WMI_DEVID_WLAN_LED; + + return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); } static void asus_rfkill_query(struct rfkill *rfkill, void *data) @@ -1653,6 +1667,7 @@ static int asus_wmi_add(struct platform_device *pdev) struct asus_wmi *asus; acpi_status status; int err; + u32 result; asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); if (!asus) @@ -1711,6 +1726,10 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_debugfs; + asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); + if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) + asus->driver->wlan_ctrl_by_user = 1; + return 0; fail_debugfs: diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 9c1da8b81bea..4c9bd38bb0a2 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -46,6 +46,7 @@ struct quirk_entry { struct asus_wmi_driver { int brightness; int panel_power; + int wlan_ctrl_by_user; const char *name; struct module *owner; From f94f0f103c440f1dbe5d89a28c92fd1a9bdf7012 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Thu, 2 Aug 2012 12:15:14 -0500 Subject: [PATCH 0727/1098] apple-gmux: Fix kconfig dependencies Fix the dependencies of apple-gmux to prevent it from being built-in when one or more of its dependencies is built as a module. Otherwise it can fail to build due to missing symbols. v2: Add dependency on ACPI to fix build failure when ACPI=n Reported-by: Arun Raghavan Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2a262f5c5c0c..637074d89790 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -758,8 +758,11 @@ config SAMSUNG_Q10 config APPLE_GMUX tristate "Apple Gmux Driver" + depends on ACPI depends on PNP - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE + depends on ACPI_VIDEO=n || ACPI_VIDEO ---help--- This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid From 76b487dd5187a4d7cc6eccd452f65467a8c7768b Mon Sep 17 00:00:00 2001 From: Andreas Heider Date: Fri, 17 Aug 2012 11:17:04 -0500 Subject: [PATCH 0728/1098] apple-gmux: Add display mux support Add support for the gmux display muxing functionality and register a mux handler with vga_switcheroo. Signed-off-by: Andreas Heider Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/apple-gmux.c | 224 ++++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 85e1bfbd1121..dfb1a92ce949 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -2,6 +2,7 @@ * Gmux driver for Apple laptops * * Copyright (C) Canonical Ltd. + * Copyright (C) 2010-2012 Andreas Heider * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -29,8 +32,17 @@ struct apple_gmux_data { struct mutex index_lock; struct backlight_device *bdev; + + /* switcheroo data */ + acpi_handle dhandle; + int gpe; + enum vga_switcheroo_client_id resume_client_id; + enum vga_switcheroo_state power_state; + struct completion powerchange_done; }; +static struct apple_gmux_data *apple_gmux_data; + /* * gmux port offsets. Many of these are not yet used, but may be in the * future, and it's useful to have them documented here anyhow. @@ -257,6 +269,146 @@ static const struct backlight_ops gmux_bl_ops = { .update_status = gmux_update_status, }; +static int gmux_switchto(enum vga_switcheroo_client_id id) +{ + if (id == VGA_SWITCHEROO_IGD) { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2); + } else { + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3); + gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); + } + + return 0; +} + +static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data, + enum vga_switcheroo_state state) +{ + INIT_COMPLETION(gmux_data->powerchange_done); + + if (state == VGA_SWITCHEROO_ON) { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3); + pr_debug("Discrete card powered up\n"); + } else { + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); + gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0); + pr_debug("Discrete card powered down\n"); + } + + gmux_data->power_state = state; + + if (gmux_data->gpe >= 0 && + !wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done, + msecs_to_jiffies(200))) + pr_warn("Timeout waiting for gmux switch to complete\n"); + + return 0; +} + +static int gmux_set_power_state(enum vga_switcheroo_client_id id, + enum vga_switcheroo_state state) +{ + if (id == VGA_SWITCHEROO_IGD) + return 0; + + return gmux_set_discrete_state(apple_gmux_data, state); +} + +static int gmux_get_client_id(struct pci_dev *pdev) +{ + /* + * Early Macbook Pros with switchable graphics use nvidia + * integrated graphics. Hardcode that the 9400M is integrated. + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + return VGA_SWITCHEROO_IGD; + else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == 0x0863) + return VGA_SWITCHEROO_IGD; + else + return VGA_SWITCHEROO_DIS; +} + +static enum vga_switcheroo_client_id +gmux_active_client(struct apple_gmux_data *gmux_data) +{ + if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2) + return VGA_SWITCHEROO_IGD; + + return VGA_SWITCHEROO_DIS; +} + +static struct vga_switcheroo_handler gmux_handler = { + .switchto = gmux_switchto, + .power_state = gmux_set_power_state, + .get_client_id = gmux_get_client_id, +}; + +static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_DISABLE); +} + +static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data) +{ + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, + GMUX_INTERRUPT_ENABLE); +} + +static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data) +{ + return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS); +} + +static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) +{ + u8 status; + + /* to clear interrupts write back current status */ + status = gmux_interrupt_get_status(gmux_data); + gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); +} + +static void gmux_notify_handler(acpi_handle device, u32 value, void *context) +{ + u8 status; + struct pnp_dev *pnp = (struct pnp_dev *)context; + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + + status = gmux_interrupt_get_status(gmux_data); + gmux_disable_interrupts(gmux_data); + pr_debug("Notify handler called: status %d\n", status); + + gmux_clear_interrupts(gmux_data); + gmux_enable_interrupts(gmux_data); + + if (status & GMUX_INTERRUPT_STATUS_POWER) + complete(&gmux_data->powerchange_done); +} + +static int gmux_suspend(struct pnp_dev *pnp, pm_message_t state) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_data->resume_client_id = gmux_active_client(gmux_data); + gmux_disable_interrupts(gmux_data); + return 0; +} + +static int gmux_resume(struct pnp_dev *pnp) +{ + struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + gmux_enable_interrupts(gmux_data); + gmux_switchto(gmux_data->resume_client_id); + if (gmux_data->power_state == VGA_SWITCHEROO_OFF) + gmux_set_discrete_state(gmux_data, gmux_data->power_state); + return 0; +} + static int __devinit gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { @@ -266,6 +418,11 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, struct backlight_device *bdev; u8 ver_major, ver_minor, ver_release; int ret = -ENXIO; + acpi_status status; + unsigned long long gpe; + + if (apple_gmux_data) + return -EBUSY; gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); if (!gmux_data) @@ -353,8 +510,62 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, #endif apple_bl_unregister(); + gmux_data->power_state = VGA_SWITCHEROO_ON; + + gmux_data->dhandle = DEVICE_ACPI_HANDLE(&pnp->dev); + if (!gmux_data->dhandle) { + pr_err("Cannot find acpi handle for pnp device %s\n", + dev_name(&pnp->dev)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe); + if (ACPI_SUCCESS(status)) { + gmux_data->gpe = (int)gpe; + + status = acpi_install_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler, pnp); + if (ACPI_FAILURE(status)) { + pr_err("Install notify handler failed: %s\n", + acpi_format_exception(status)); + ret = -ENODEV; + goto err_notify; + } + + status = acpi_enable_gpe(NULL, gmux_data->gpe); + if (ACPI_FAILURE(status)) { + pr_err("Cannot enable gpe: %s\n", + acpi_format_exception(status)); + goto err_enable_gpe; + } + } else { + pr_warn("No GPE found for gmux\n"); + gmux_data->gpe = -1; + } + + if (vga_switcheroo_register_handler(&gmux_handler)) { + ret = -ENODEV; + goto err_register_handler; + } + + init_completion(&gmux_data->powerchange_done); + apple_gmux_data = gmux_data; + gmux_enable_interrupts(gmux_data); + return 0; +err_register_handler: + if (gmux_data->gpe >= 0) + acpi_disable_gpe(NULL, gmux_data->gpe); +err_enable_gpe: + if (gmux_data->gpe >= 0) + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); +err_notify: + backlight_device_unregister(bdev); err_release: release_region(gmux_data->iostart, gmux_data->iolen); err_free: @@ -366,8 +577,19 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) { struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); + vga_switcheroo_unregister_handler(); + gmux_disable_interrupts(gmux_data); + if (gmux_data->gpe >= 0) { + acpi_disable_gpe(NULL, gmux_data->gpe); + acpi_remove_notify_handler(gmux_data->dhandle, + ACPI_DEVICE_NOTIFY, + &gmux_notify_handler); + } + backlight_device_unregister(gmux_data->bdev); + release_region(gmux_data->iostart, gmux_data->iolen); + apple_gmux_data = NULL; kfree(gmux_data); acpi_video_dmi_demote_vendor(); @@ -387,6 +609,8 @@ static struct pnp_driver gmux_pnp_driver = { .probe = gmux_probe, .remove = __devexit_p(gmux_remove), .id_table = gmux_device_ids, + .suspend = gmux_suspend, + .resume = gmux_resume }; static int __init apple_gmux_init(void) From 36704c0c4c64f889d77158d497f6a7e596d1341c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:03 -0500 Subject: [PATCH 0729/1098] vga_switcheroo: Remove assumptions about registration/unregistration ordering vga_switcheroo assumes that the handler will be registered before the last client, otherwise switching will not be enabled. Likewise it's assumed that the handler will not be unregistered without at least one client also being unregistered, otherwise switching will remain enabled despite no longer having a handler. These assumptions cannot be enforced if the handler is in a separate driver from both clients, as with the gmux found in Apple laptops. Remove this assumption. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/vga/vga_switcheroo.c | 58 ++++++++++++++++++++------------ 1 file changed, 36 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 5b3c7d135dc9..e10ba3755dfa 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -70,27 +70,12 @@ static struct vgasr_priv vgasr_priv = { .clients = LIST_HEAD_INIT(vgasr_priv.clients), }; -int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) +static bool vga_switcheroo_ready(void) { - mutex_lock(&vgasr_mutex); - if (vgasr_priv.handler) { - mutex_unlock(&vgasr_mutex); - return -EINVAL; - } - - vgasr_priv.handler = handler; - mutex_unlock(&vgasr_mutex); - return 0; + /* we're ready if we get two clients + handler */ + return !vgasr_priv.active && + vgasr_priv.registered_clients == 2 && vgasr_priv.handler; } -EXPORT_SYMBOL(vga_switcheroo_register_handler); - -void vga_switcheroo_unregister_handler(void) -{ - mutex_lock(&vgasr_mutex); - vgasr_priv.handler = NULL; - mutex_unlock(&vgasr_mutex); -} -EXPORT_SYMBOL(vga_switcheroo_unregister_handler); static void vga_switcheroo_enable(void) { @@ -113,6 +98,37 @@ static void vga_switcheroo_enable(void) vgasr_priv.active = true; } +int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) +{ + mutex_lock(&vgasr_mutex); + if (vgasr_priv.handler) { + mutex_unlock(&vgasr_mutex); + return -EINVAL; + } + + vgasr_priv.handler = handler; + if (vga_switcheroo_ready()) { + printk(KERN_INFO "vga_switcheroo: enabled\n"); + vga_switcheroo_enable(); + } + mutex_unlock(&vgasr_mutex); + return 0; +} +EXPORT_SYMBOL(vga_switcheroo_register_handler); + +void vga_switcheroo_unregister_handler(void) +{ + mutex_lock(&vgasr_mutex); + vgasr_priv.handler = NULL; + if (vgasr_priv.active) { + pr_info("vga_switcheroo: disabled\n"); + vga_switcheroo_debugfs_fini(&vgasr_priv); + vgasr_priv.active = false; + } + mutex_unlock(&vgasr_mutex); +} +EXPORT_SYMBOL(vga_switcheroo_unregister_handler); + static int register_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, int id, bool active) @@ -134,9 +150,7 @@ static int register_client(struct pci_dev *pdev, if (client_is_vga(client)) vgasr_priv.registered_clients++; - /* if we get two clients + handler */ - if (!vgasr_priv.active && - vgasr_priv.registered_clients == 2 && vgasr_priv.handler) { + if (vga_switcheroo_ready()) { printk(KERN_INFO "vga_switcheroo: enabled\n"); vga_switcheroo_enable(); } From e99eac5e4ea3bd8671bb1cedad10c3fec90ec0de Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 17 Aug 2012 11:17:02 -0500 Subject: [PATCH 0730/1098] vga_switcheroo: Don't require handler init callback This callback is a no-op in nouveau, and the upcoming apple-gmux switcheroo support won't require it either. Rather than forcing drivers to stub it out, just make it optional and remove the callback from nouveau. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 6 ------ drivers/gpu/vga/vga_switcheroo.c | 3 ++- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index fc841e87b343..26ebffebe710 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -211,11 +211,6 @@ static int nouveau_dsm_power_state(enum vga_switcheroo_client_id id, return nouveau_dsm_set_discrete_state(nouveau_dsm_priv.dhandle, state); } -static int nouveau_dsm_init(void) -{ - return 0; -} - static int nouveau_dsm_get_client_id(struct pci_dev *pdev) { /* easy option one - intel vendor ID means Integrated */ @@ -232,7 +227,6 @@ static int nouveau_dsm_get_client_id(struct pci_dev *pdev) static struct vga_switcheroo_handler nouveau_dsm_handler = { .switchto = nouveau_dsm_switchto, .power_state = nouveau_dsm_power_state, - .init = nouveau_dsm_init, .get_client_id = nouveau_dsm_get_client_id, }; diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index e10ba3755dfa..e25cf31faab2 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -83,7 +83,8 @@ static void vga_switcheroo_enable(void) struct vga_switcheroo_client *client; /* call the handler to init */ - vgasr_priv.handler->init(); + if (vgasr_priv.handler->init) + vgasr_priv.handler->init(); list_for_each_entry(client, &vgasr_priv.clients, list) { if (client->id != -1) From a2174ba29a3026d50aa0b59297821ea9cccd75cc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Mon, 6 Aug 2012 09:48:58 +0800 Subject: [PATCH 0731/1098] dell-laptop: Fixed typo in touchpad LED quirk Fixed the typo introduced from the below commit 5f1e88f dell-laptop: Add 6 machines to touchpad led quirk Reported-by: Carlos Alberto Lopez Perez Signed-off-by: AceLan Kao Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 4e96e8c0b60f..927c33af67ec 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -211,7 +211,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -220,7 +220,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -229,7 +229,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 5720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 5720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5720"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7420"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -247,7 +247,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7520"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"), }, .driver_data = &quirk_dell_vostro_v130, }, @@ -256,7 +256,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { .ident = "Dell Inspiron 7720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Isnpiron 7720"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), }, .driver_data = &quirk_dell_vostro_v130, }, From a4f46bb9fa84642e356898ee44b670989622f8bb Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 6 Aug 2012 18:15:37 -0500 Subject: [PATCH 0732/1098] thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR In the latest V-series bios DMI_PRODUCT_VERSION does not contain the string Lenovo or Thinkpad, but is set to the model number, this causes the thinkpad_acpi module to fail to load. Recognize laptop as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo. Test on V490u ============= == After the patch == [ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown [ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX [ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled [ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1350.307082] Registered led device: tpacpi::thinklight [ 1350.307215] Registered led device: tpacpi::power [ 1350.307255] Registered led device: tpacpi::standby [ 1350.307294] Registered led device: tpacpi::thinkvantage [ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14 == Before the patch == sudo modprobe thinkpad_acpi FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device Test on B485 ============= This patch was also test in a B485 where the thinkpad_acpi module does not have any issues loading. But, I tested it to make sure this patch does not break on already functioning models of Lenovo products. [13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/ [13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown [13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01 [13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [13486.752883] Registered led device: tpacpi::thinklight [13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15 Signed-off-by: Manoj Iyer Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index f28f36ccdcf4..80e377949314 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8664,6 +8664,13 @@ static int __must_check __init get_thinkpad_model_data( tp->model_str = kstrdup(s, GFP_KERNEL); if (!tp->model_str) return -ENOMEM; + } else { + s = dmi_get_system_info(DMI_BIOS_VENDOR); + if (s && !(strnicmp(s, "Lenovo", 6))) { + tp->model_str = kstrdup(s, GFP_KERNEL); + if (!tp->model_str) + return -ENOMEM; + } } s = dmi_get_system_info(DMI_PRODUCT_NAME); From ad20c73b05ea40cfdb42758506fb6b6befa3c9e5 Mon Sep 17 00:00:00 2001 From: Carlos Alberto Lopez Perez Date: Thu, 2 Aug 2012 19:50:21 +0200 Subject: [PATCH 0733/1098] classmate-laptop: always call input_sync() after input_report_switch() Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2 evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. So in order to read the tablet sensor data as it happens we need to ensure that we always call input_sync() after input_report_switch() Signed-off-by: Carlos Alberto Lopez Perez Signed-off-by: Matthew Garrett --- drivers/platform/x86/classmate-laptop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index cd33add118ce..c87ff16873f9 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -725,8 +725,10 @@ static void cmpc_tablet_handler(struct acpi_device *dev, u32 event) struct input_dev *inputdev = dev_get_drvdata(&dev->dev); if (event == 0x81) { - if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(dev->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } } @@ -739,8 +741,10 @@ static void cmpc_tablet_idev_init(struct input_dev *inputdev) set_bit(SW_TABLET_MODE, inputdev->swbit); acpi = to_acpi_device(inputdev->dev.parent); - if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(acpi->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } } static int cmpc_tablet_add(struct acpi_device *acpi) @@ -760,8 +764,10 @@ static int cmpc_tablet_resume(struct device *dev) struct input_dev *inputdev = dev_get_drvdata(dev); unsigned long long val = 0; - if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) + if (ACPI_SUCCESS(cmpc_get_tablet(to_acpi_device(dev)->handle, &val))) { input_report_switch(inputdev, SW_TABLET_MODE, !val); + input_sync(inputdev); + } return 0; } #endif From 939d5044b117302cabdd30833685d9f214e9bff6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 16 Aug 2012 13:08:23 +0100 Subject: [PATCH 0734/1098] ASoC: wm5102: Remove DRC2 It will be removed from future device revisions. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5102.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 496ce9a9d8be..e33d327396ad 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -128,13 +128,9 @@ SOC_SINGLE_TLV("EQ4 B5 Volume", ARIZONA_EQ4_2, ARIZONA_EQ4_B5_GAIN_SHIFT, ARIZONA_MIXER_CONTROLS("DRC1L", ARIZONA_DRC1LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DRC1R", ARIZONA_DRC1RMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DRC2L", ARIZONA_DRC2LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DRC2R", ARIZONA_DRC2RMIX_INPUT_1_SOURCE), SND_SOC_BYTES_MASK("DRC1", ARIZONA_DRC1_CTRL1, 5, ARIZONA_DRC1R_ENA | ARIZONA_DRC1L_ENA), -SND_SOC_BYTES_MASK("DRC2", ARIZONA_DRC2_CTRL1, 5, - ARIZONA_DRC2R_ENA | ARIZONA_DRC2L_ENA), ARIZONA_MIXER_CONTROLS("LHPF1", ARIZONA_HPLP1MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("LHPF2", ARIZONA_HPLP2MIX_INPUT_1_SOURCE), @@ -236,8 +232,6 @@ ARIZONA_MIXER_ENUMS(EQ4, ARIZONA_EQ4MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(DRC1L, ARIZONA_DRC1LMIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(DRC1R, ARIZONA_DRC1RMIX_INPUT_1_SOURCE); -ARIZONA_MIXER_ENUMS(DRC2L, ARIZONA_DRC2LMIX_INPUT_1_SOURCE); -ARIZONA_MIXER_ENUMS(DRC2R, ARIZONA_DRC2RMIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(LHPF1, ARIZONA_HPLP1MIX_INPUT_1_SOURCE); ARIZONA_MIXER_ENUMS(LHPF2, ARIZONA_HPLP2MIX_INPUT_1_SOURCE); @@ -349,10 +343,6 @@ SND_SOC_DAPM_PGA("DRC1L", ARIZONA_DRC1_CTRL1, ARIZONA_DRC1L_ENA_SHIFT, 0, NULL, 0), SND_SOC_DAPM_PGA("DRC1R", ARIZONA_DRC1_CTRL1, ARIZONA_DRC1R_ENA_SHIFT, 0, NULL, 0), -SND_SOC_DAPM_PGA("DRC2L", ARIZONA_DRC2_CTRL1, ARIZONA_DRC2L_ENA_SHIFT, 0, - NULL, 0), -SND_SOC_DAPM_PGA("DRC2R", ARIZONA_DRC2_CTRL1, ARIZONA_DRC2R_ENA_SHIFT, 0, - NULL, 0), SND_SOC_DAPM_PGA("LHPF1", ARIZONA_HPLPF1_1, ARIZONA_LHPF1_ENA_SHIFT, 0, NULL, 0), @@ -466,8 +456,6 @@ ARIZONA_MIXER_WIDGETS(EQ4, "EQ4"), ARIZONA_MIXER_WIDGETS(DRC1L, "DRC1L"), ARIZONA_MIXER_WIDGETS(DRC1R, "DRC1R"), -ARIZONA_MIXER_WIDGETS(DRC2L, "DRC2L"), -ARIZONA_MIXER_WIDGETS(DRC2R, "DRC2R"), ARIZONA_MIXER_WIDGETS(LHPF1, "LHPF1"), ARIZONA_MIXER_WIDGETS(LHPF2, "LHPF2"), @@ -553,8 +541,6 @@ SND_SOC_DAPM_OUTPUT("SPKDAT1R"), { name, "EQ4", "EQ4" }, \ { name, "DRC1L", "DRC1L" }, \ { name, "DRC1R", "DRC1R" }, \ - { name, "DRC2L", "DRC2L" }, \ - { name, "DRC2R", "DRC2R" }, \ { name, "LHPF1", "LHPF1" }, \ { name, "LHPF2", "LHPF2" }, \ { name, "LHPF3", "LHPF3" }, \ @@ -684,8 +670,6 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = { ARIZONA_MIXER_ROUTES("DRC1L", "DRC1L"), ARIZONA_MIXER_ROUTES("DRC1R", "DRC1R"), - ARIZONA_MIXER_ROUTES("DRC2L", "DRC2L"), - ARIZONA_MIXER_ROUTES("DRC2R", "DRC2R"), ARIZONA_MIXER_ROUTES("LHPF1", "LHPF1"), ARIZONA_MIXER_ROUTES("LHPF2", "LHPF2"), From ccf795847a38235ee4a56a24129ce75147d6ba8f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 16 Aug 2012 22:36:04 +0100 Subject: [PATCH 0735/1098] ASoC: wm9712: Fix microphone source selection Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm9712.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index f16fb361a4eb..fd74b8843d34 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -272,7 +272,7 @@ SOC_DAPM_ENUM("Route", wm9712_enum[9]); /* Mic select */ static const struct snd_kcontrol_new wm9712_mic_src_controls = -SOC_DAPM_ENUM("Route", wm9712_enum[7]); +SOC_DAPM_ENUM("Mic Source Select", wm9712_enum[7]); /* diff select */ static const struct snd_kcontrol_new wm9712_diff_sel_controls = @@ -291,7 +291,9 @@ SND_SOC_DAPM_MUX("Left Capture Select", SND_SOC_NOPM, 0, 0, &wm9712_capture_selectl_controls), SND_SOC_DAPM_MUX("Right Capture Select", SND_SOC_NOPM, 0, 0, &wm9712_capture_selectr_controls), -SND_SOC_DAPM_MUX("Mic Select Source", SND_SOC_NOPM, 0, 0, +SND_SOC_DAPM_MUX("Left Mic Select Source", SND_SOC_NOPM, 0, 0, + &wm9712_mic_src_controls), +SND_SOC_DAPM_MUX("Right Mic Select Source", SND_SOC_NOPM, 0, 0, &wm9712_mic_src_controls), SND_SOC_DAPM_MUX("Differential Source", SND_SOC_NOPM, 0, 0, &wm9712_diff_sel_controls), @@ -319,6 +321,7 @@ SND_SOC_DAPM_PGA("Out 3 PGA", AC97_INT_PAGING, 5, 1, NULL, 0), SND_SOC_DAPM_PGA("Line PGA", AC97_INT_PAGING, 2, 1, NULL, 0), SND_SOC_DAPM_PGA("Phone PGA", AC97_INT_PAGING, 1, 1, NULL, 0), SND_SOC_DAPM_PGA("Mic PGA", AC97_INT_PAGING, 0, 1, NULL, 0), +SND_SOC_DAPM_PGA("Differential Mic", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MICBIAS("Mic Bias", AC97_INT_PAGING, 10, 1), SND_SOC_DAPM_OUTPUT("MONOOUT"), SND_SOC_DAPM_OUTPUT("HPOUTL"), @@ -379,6 +382,18 @@ static const struct snd_soc_dapm_route wm9712_audio_map[] = { {"Mic PGA", NULL, "MIC1"}, {"Mic PGA", NULL, "MIC2"}, + /* microphones */ + {"Differential Mic", NULL, "MIC1"}, + {"Differential Mic", NULL, "MIC2"}, + {"Left Mic Select Source", "Mic 1", "MIC1"}, + {"Left Mic Select Source", "Mic 2", "MIC2"}, + {"Left Mic Select Source", "Stereo", "MIC1"}, + {"Left Mic Select Source", "Differential", "Differential Mic"}, + {"Right Mic Select Source", "Mic 1", "MIC1"}, + {"Right Mic Select Source", "Mic 2", "MIC2"}, + {"Right Mic Select Source", "Stereo", "MIC2"}, + {"Right Mic Select Source", "Differential", "Differential Mic"}, + /* left capture selector */ {"Left Capture Select", "Mic", "MIC1"}, {"Left Capture Select", "Speaker Mixer", "Speaker Mixer"}, From 28c42c28309244d0b15d1b385e33429d59997679 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 31 Jul 2012 18:37:28 +0100 Subject: [PATCH 0736/1098] ASoC: wm9712: Fix inverted capture volume The capture volume increases with the register value so it shouldn't be flagged as inverted. Reported-by: Christoph Fritz Signed-off-by: Mark Brown --- sound/soc/codecs/wm9712.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index fd74b8843d34..c6d2076a796b 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -148,7 +148,7 @@ SOC_SINGLE("Treble Volume", AC97_MASTER_TONE, 0, 15, 1), SOC_SINGLE("Capture ADC Switch", AC97_REC_GAIN, 15, 1, 1), SOC_ENUM("Capture Volume Steps", wm9712_enum[6]), -SOC_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 63, 1), +SOC_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 63, 0), SOC_SINGLE("Capture ZC Switch", AC97_REC_GAIN, 7, 1, 0), SOC_SINGLE_TLV("Mic 1 Volume", AC97_MIC, 8, 31, 1, main_tlv), From 6887237cd7da904184dab2750504040c68f3a080 Mon Sep 17 00:00:00 2001 From: Michel JAOUEN Date: Fri, 17 Aug 2012 17:28:41 +0200 Subject: [PATCH 0737/1098] spi/pl022: fix spi-pl022 pm enable at probe amba drivers does not need to enable pm runtime at probe. amba_probe already enables pm runtime. This rids this warning in the ux500 boot log: ssp-pl022 ssp0: Unbalanced pm_runtime_enable! Signed-off-by: Michel JAOUEN Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index aab518ec2bbc..6abbe23c39b4 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2053,7 +2053,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); - pm_runtime_enable(dev); pm_runtime_resume(dev); pl022->clk = clk_get(&adev->dev, NULL); From a0c3652caa357b8f4e76efe401646ef298483cd9 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Aug 2012 20:25:59 -0700 Subject: [PATCH 0738/1098] spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-coldfire-qspi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index b2d4b9e4e010..1a30b47465cb 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -533,7 +533,6 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) iounmap(mcfqspi->iobase); release_mem_region(res->start, resource_size(res)); spi_unregister_master(master); - spi_master_put(master); return 0; } From af36107968f1b5faab0e4a0cc44fa4498c63f017 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 16 Aug 2012 20:26:00 -0700 Subject: [PATCH 0739/1098] spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions Suspend and resume functions call spi_master_get() without matching spi_master_put(). The extra references are unnecessary and cause subsequent module unload attempts to fail, so drop the calls. Signed-off-by: Guenter Roeck Signed-off-by: Mark Brown --- drivers/spi/spi-coldfire-qspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index 1a30b47465cb..764bfee75920 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -540,7 +540,7 @@ static int __devexit mcfqspi_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int mcfqspi_suspend(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_suspend(master); @@ -552,7 +552,7 @@ static int mcfqspi_suspend(struct device *dev) static int mcfqspi_resume(struct device *dev) { - struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct spi_master *master = dev_get_drvdata(dev); struct mcfqspi *mcfqspi = spi_master_get_devdata(master); spi_master_resume(master); From e0ee778528bbaad28a5c69d2e219269a3a096607 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sat, 18 Aug 2012 09:51:42 +1000 Subject: [PATCH 0740/1098] md/raid10: fix problem with on-stack allocation of r10bio structure. A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev Tested-by: Ivan Vasilyev Signed-off-by: NeilBrown --- drivers/md/raid10.c | 30 +++++++++++++++++++----------- drivers/md/raid10.h | 2 +- 2 files changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index de5ed6fd8806..1c2eb38f3c51 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -659,7 +659,11 @@ static int raid10_mergeable_bvec(struct request_queue *q, max = biovec->bv_len; if (mddev->merge_check_needed) { - struct r10bio r10_bio; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10_bio = &on_stack.r10_bio; int s; if (conf->reshape_progress != MaxSector) { /* Cannot give any guidance during reshape */ @@ -667,18 +671,18 @@ static int raid10_mergeable_bvec(struct request_queue *q, return biovec->bv_len; return 0; } - r10_bio.sector = sector; - raid10_find_phys(conf, &r10_bio); + r10_bio->sector = sector; + raid10_find_phys(conf, r10_bio); rcu_read_lock(); for (s = 0; s < conf->copies; s++) { - int disk = r10_bio.devs[s].devnum; + int disk = r10_bio->devs[s].devnum; struct md_rdev *rdev = rcu_dereference( conf->mirrors[disk].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -690,7 +694,7 @@ static int raid10_mergeable_bvec(struct request_queue *q, struct request_queue *q = bdev_get_queue(rdev->bdev); if (q->merge_bvec_fn) { - bvm->bi_sector = r10_bio.devs[s].addr + bvm->bi_sector = r10_bio->devs[s].addr + rdev->data_offset; bvm->bi_bdev = rdev->bdev; max = min(max, q->merge_bvec_fn( @@ -4414,14 +4418,18 @@ static int handle_reshape_read_error(struct mddev *mddev, { /* Use sync reads to get the blocks from somewhere else */ int sectors = r10_bio->sectors; - struct r10bio r10b; struct r10conf *conf = mddev->private; + struct { + struct r10bio r10_bio; + struct r10dev devs[conf->copies]; + } on_stack; + struct r10bio *r10b = &on_stack.r10_bio; int slot = 0; int idx = 0; struct bio_vec *bvec = r10_bio->master_bio->bi_io_vec; - r10b.sector = r10_bio->sector; - __raid10_find_phys(&conf->prev, &r10b); + r10b->sector = r10_bio->sector; + __raid10_find_phys(&conf->prev, r10b); while (sectors) { int s = sectors; @@ -4432,7 +4440,7 @@ static int handle_reshape_read_error(struct mddev *mddev, s = PAGE_SIZE >> 9; while (!success) { - int d = r10b.devs[slot].devnum; + int d = r10b->devs[slot].devnum; struct md_rdev *rdev = conf->mirrors[d].rdev; sector_t addr; if (rdev == NULL || @@ -4440,7 +4448,7 @@ static int handle_reshape_read_error(struct mddev *mddev, !test_bit(In_sync, &rdev->flags)) goto failed; - addr = r10b.devs[slot].addr + idx * PAGE_SIZE; + addr = r10b->devs[slot].addr + idx * PAGE_SIZE; success = sync_page_io(rdev, addr, s << 9, diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 007c2c68dd83..1054cf602345 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -110,7 +110,7 @@ struct r10bio { * We choose the number when they are allocated. * We sometimes need an extra bio to write to the replacement. */ - struct { + struct r10dev { struct bio *bio; union { struct bio *repl_bio; /* used for resync and From 74f4cf290918f05b6489aa732dfb08aa5606b9d6 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 17:06:41 -0700 Subject: [PATCH 0741/1098] target: Fix regression bug with handling of zero-length data CDBs This patch fixes a regression bug with the handling of zero-length data CDBs within transport_generic_new_cmd() code. The bug was introduced with the following commit as part of the single task conversion work: commit 4101f0a89d4eb13f04cb0344d59a335b862ca5f9 Author: Christoph Hellwig Date: Tue Apr 24 00:25:03 2012 -0400 target: always allocate a single task where the zero-length check for SCF_SCSI_DATA_SG_IO_CDB was incorrectly changed to SCF_SCSI_CONTROL_SG_IO_CDB because of the seperate comment in transport_generic_new_cmd() wrt to control CDBs zero-length handling introduced in: commit 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Author: Nicholas Bellinger Date: Fri Jan 13 12:01:34 2012 -0800 target: Add workaround for zero-length control CDB handling So go ahead and change transport_generic_new_cmd() to handle control+data zero-length CDBs in the same manner for this special case. Tested with iscsi-target + loopback fabric port LUNs on 3.6-rc0 code. This patch will also need to be picked up for 3.5-stable. (hch: Add proper comment in transport_generic_new_cmd) Cc: Christoph Hellwig Cc: Roland Dreier Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a7589ccdb6f3..ea9a3d2e4f55 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2323,9 +2323,12 @@ int transport_generic_new_cmd(struct se_cmd *cmd) if (ret < 0) goto out_fail; } - - /* Workaround for handling zero-length control CDBs */ - if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->data_length) { + /* + * If this command doesn't have any payload and we don't have to call + * into the fabric for data transfers, go ahead and complete it right + * away. + */ + if (!cmd->data_length) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; From d04dbd1c0ec17a13326c8f2279399c225836a79f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:26 -0700 Subject: [PATCH 0742/1098] USB: smsusb: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Mauro Carvalho Chehab CC: Michael Krufky CC: Paul Gortmaker CC: Doron Cohen Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb/siano/smsusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index 664e460f247b..aac622200e99 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -481,7 +481,7 @@ static int smsusb_resume(struct usb_interface *intf) return 0; } -static const struct usb_device_id smsusb_id_table[] __devinitconst = { +static const struct usb_device_id smsusb_id_table[] = { { USB_DEVICE(0x187f, 0x0010), .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, { USB_DEVICE(0x187f, 0x0100), From ec063351684298e295dc9444d143ddfd6ab02df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:27 -0700 Subject: [PATCH 0743/1098] USB: jl2005bcd: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Hans de Goede CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/gspca/jl2005bcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/jl2005bcd.c b/drivers/media/video/gspca/jl2005bcd.c index cf9d9fca5b84..234777116e5f 100644 --- a/drivers/media/video/gspca/jl2005bcd.c +++ b/drivers/media/video/gspca/jl2005bcd.c @@ -512,7 +512,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0227)}, {} }; From e694d518886c7afedcdd1732477832b2e32744e4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:27 -0700 Subject: [PATCH 0744/1098] USB: spca506: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Hans de Goede CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/gspca/spca506.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 969bb5a4cd93..bab01c86c315 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -579,7 +579,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06e1, 0xa190)}, /*fixme: may be IntelPCCameraPro BRIDGE_SPCA505 {USB_DEVICE(0x0733, 0x0430)}, */ From b9c4167cbbafddac3462134013bc15e63e4c53ef Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:28 -0700 Subject: [PATCH 0745/1098] USB: p54usb: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Christian Lamparter CC: "John W. Linville" Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/p54/p54usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 7f207b6e9552..effb044a8a9d 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -42,7 +42,7 @@ MODULE_FIRMWARE("isl3887usb"); * whenever you add a new device. */ -static struct usb_device_id p54u_table[] __devinitdata = { +static struct usb_device_id p54u_table[] = { /* Version 1 devices (pci chip + net2280) */ {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ From a3433179d0822ccfa8e80aa4d1d52843bd2dcc63 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:29 -0700 Subject: [PATCH 0746/1098] USB: rtl8187: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Herton Ronaldo Krzesinski CC: Hin-Tak Leung CC: Larry Finger CC: "John W. Linville" Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 71a30b026089..533024095c43 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -44,7 +44,7 @@ MODULE_AUTHOR("Larry Finger "); MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); MODULE_LICENSE("GPL"); -static struct usb_device_id rtl8187_table[] __devinitdata = { +static struct usb_device_id rtl8187_table[] = { /* Asus */ {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, /* Belkin */ From 4d088876f24887cd15a29db923f5f37db6a99f21 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:33 -0700 Subject: [PATCH 0747/1098] USB: vt6656: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Forest Bond CC: Marcos Paulo de Souza CC: "David S. Miller" CC: Jesper Juhl CC: Jiri Pirko Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/main_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index b06fd5b723fa..d536756549e6 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -189,7 +189,7 @@ DEVICE_PARAM(b80211hEnable, "802.11h mode"); // Static vars definitions // -static struct usb_device_id vt6656_table[] __devinitdata = { +static struct usb_device_id vt6656_table[] = { {USB_DEVICE(VNT_USB_VENDOR_ID, VNT_USB_PRODUCT_ID)}, {} }; From 43a34695d9cd79c6659f09da6d3b0624f3dd169f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:37 -0700 Subject: [PATCH 0748/1098] USB: winbond: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Pavel Machek CC: Paul Gortmaker CC: "John W. Linville" CC: Eliad Peller CC: Devendra Naga Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index ef360547ecec..0ca857ac473e 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -25,7 +25,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); -static const struct usb_device_id wb35_table[] __devinitconst = { +static const struct usb_device_id wb35_table[] = { { USB_DEVICE(0x0416, 0x0035) }, { USB_DEVICE(0x18E8, 0x6201) }, { USB_DEVICE(0x18E8, 0x6206) }, From 83957df21dd94655d2b026e0944a69ff37b83988 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 17 Aug 2012 17:48:41 -0700 Subject: [PATCH 0749/1098] USB: emi62: remove __devinit* from the struct usb_device_id table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by: Fengguang Wu Reported-by: Bjørn Mork Cc: stable CC: Paul Gortmaker CC: Andrew Morton CC: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/emi62.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index ff08015b230c..ae794b90766b 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -232,7 +232,7 @@ wraperr: return err; } -static const struct usb_device_id id_table[] __devinitconst = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) }, { } /* Terminating entry */ }; From 99f347caa4568cb803862730b3b1f1942639523f Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Fri, 17 Aug 2012 21:43:43 +0200 Subject: [PATCH 0750/1098] USB: CDC ACM: Fix NULL pointer dereference If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by: Sven Schnelle Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 56d6bf668488..f763ed7ba91e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1104,7 +1104,8 @@ skip_normal_probe: } - if (data_interface->cur_altsetting->desc.bNumEndpoints < 2) + if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 || + control_interface->cur_altsetting->desc.bNumEndpoints == 0) return -EINVAL; epctrl = &control_interface->cur_altsetting->endpoint[0].desc; From b007a3ef958413736a9e2ba698ad6675a9d519ab Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 7 Aug 2012 12:27:24 +0100 Subject: [PATCH 0751/1098] i2c: nomadik: Add default configuration into the Nomadik I2C driver At this moment in time there is only one known configuration for the Nomadik I2C driver. By not holding that configuration in the driver adds some unnecessary overhead in platform code. The configuration has already been removed from platform code, this patch checks for any over-riding configurations. If there aren't any, the default is used. [LinusW says: "Right now this is causing boot regressions so we need it badly..."] Acked-by: srinidhi kasagar Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nomadik.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5e6f1eed4f83..61b00edacb08 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) i2c_clk = clk_get_rate(dev->clk); - /* fallback to std. mode if machine has not provided it */ - if (dev->cfg.clk_freq == 0) - dev->cfg.clk_freq = 100000; - /* * The spec says, in case of std. mode the divider is * 2 whereas it is 3 for fast and fastplus mode of @@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = { .functionality = nmk_i2c_functionality }; +static struct nmk_i2c_controller u8500_i2c = { + /* + * Slave data setup time; 250ns, 100ns, and 10ns, which + * is 14, 6 and 2 respectively for a 48Mhz i2c clock. + */ + .slsu = 0xe, + .tft = 1, /* Tx FIFO threshold */ + .rft = 8, /* Rx FIFO threshold */ + .clk_freq = 400000, /* fast mode operation */ + .timeout = 200, /* Slave response timeout(ms) */ + .sm = I2C_FREQ_MODE_FAST, +}; + static atomic_t adapter_id = ATOMIC_INIT(0); static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct nmk_i2c_controller *pdata = - adev->dev.platform_data; + struct nmk_i2c_controller *pdata = adev->dev.platform_data; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; - if (!pdata) { - dev_warn(&adev->dev, "no platform data\n"); - return -ENODEV; - } + if (!pdata) + /* No i2c configuration found, using the default. */ + pdata = &u8500_i2c; + dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { dev_err(&adev->dev, "cannot allocate memory\n"); From 33ec5e818b7b0d0d02864a9586050c6f9a6a8b98 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 26 Jun 2012 18:45:32 -0700 Subject: [PATCH 0752/1098] I2C: OMAP: xfer: fix runtime PM get/put balance on error In omap_i2c_xfer(), ensure pm_runtime_put() is called, even on failure. Without this, after a failed xfer, the runtime PM usecount will have been incremented, but not decremented causing the usecount to never reach zero after a failure. This keeps the device always runtime PM enabled which keeps the enclosing power domain active, and prevents full-chip retention/off from happening during idle. Signed-off-by: Kevin Hilman Reviewed-by: Shubhrajyoti D Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6849635b268a..5d19a49803c1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) r = pm_runtime_get_sync(dev->dev); if (IS_ERR_VALUE(r)) - return r; + goto out; r = omap_i2c_wait_for_bb(dev); if (r < 0) From ab5625c30a0a3c8a8491b641c939575c84bc0dbb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 9 Aug 2012 08:47:20 -0700 Subject: [PATCH 0753/1098] i2c: diolan-u2c: Fix master_xfer return code The master_xfer function returns 0 on success. It should return the number of successful transactions. Signed-off-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-diolan-u2c.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index aedb94f34bf7..dae3ddfe7619 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } } } + ret = num; abort: sret = diolan_i2c_stop(dev); if (sret < 0 && ret >= 0) From 371e67c9e1a82b5fd8110b9a25e36bbc3a99e8c7 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Sat, 18 Aug 2012 17:49:58 +0530 Subject: [PATCH 0754/1098] i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP The CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. Hence protecting sleep callbacks with CONFIG_PM_SLEEP. Signed-off-by: Laxman Dewangan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 66eb53fac202..9a08c57bc936 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); From 312b90fbed0e07f61d2f060789440a83df6bba23 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Aug 2012 10:18:17 +0400 Subject: [PATCH 0755/1098] mqueue: lift mnt_want_write() outside ->i_mutex, clean up a bit the way it abuses ->d_fsdata still needs to be killed, but that's a separate story. Signed-off-by: Al Viro --- ipc/mqueue.c | 61 ++++++++++++++++++++++++---------------------------- 1 file changed, 28 insertions(+), 33 deletions(-) diff --git a/ipc/mqueue.c b/ipc/mqueue.c index f8e54f5b9080..9a08acc9e649 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -726,7 +726,6 @@ static struct file *do_create(struct ipc_namespace *ipc_ns, struct inode *dir, struct mq_attr *attr) { const struct cred *cred = current_cred(); - struct file *result; int ret; if (attr) { @@ -748,21 +747,11 @@ static struct file *do_create(struct ipc_namespace *ipc_ns, struct inode *dir, } mode &= ~current_umask(); - ret = mnt_want_write(path->mnt); - if (ret) - return ERR_PTR(ret); ret = vfs_create(dir, path->dentry, mode, true); path->dentry->d_fsdata = NULL; - if (!ret) - result = dentry_open(path, oflag, cred); - else - result = ERR_PTR(ret); - /* - * dentry_open() took a persistent mnt_want_write(), - * so we can now drop this one. - */ - mnt_drop_write(path->mnt); - return result; + if (ret) + return ERR_PTR(ret); + return dentry_open(path, oflag, cred); } /* Opens existing queue */ @@ -788,7 +777,9 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, struct mq_attr attr; int fd, error; struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns; - struct dentry *root = ipc_ns->mq_mnt->mnt_root; + struct vfsmount *mnt = ipc_ns->mq_mnt; + struct dentry *root = mnt->mnt_root; + int ro; if (u_attr && copy_from_user(&attr, u_attr, sizeof(struct mq_attr))) return -EFAULT; @@ -802,6 +793,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, if (fd < 0) goto out_putname; + ro = mnt_want_write(mnt); /* we'll drop it in any case */ error = 0; mutex_lock(&root->d_inode->i_mutex); path.dentry = lookup_one_len(name, root, strlen(name)); @@ -809,7 +801,7 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, error = PTR_ERR(path.dentry); goto out_putfd; } - path.mnt = mntget(ipc_ns->mq_mnt); + path.mnt = mntget(mnt); if (oflag & O_CREAT) { if (path.dentry->d_inode) { /* entry already exists */ @@ -820,6 +812,10 @@ SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, umode_t, mode, } filp = do_open(&path, oflag); } else { + if (ro) { + error = ro; + goto out; + } filp = do_create(ipc_ns, root->d_inode, &path, oflag, mode, u_attr ? &attr : NULL); @@ -845,6 +841,7 @@ out_putfd: fd = error; } mutex_unlock(&root->d_inode->i_mutex); + mnt_drop_write(mnt); out_putname: putname(name); return fd; @@ -857,40 +854,38 @@ SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name) struct dentry *dentry; struct inode *inode = NULL; struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns; + struct vfsmount *mnt = ipc_ns->mq_mnt; name = getname(u_name); if (IS_ERR(name)) return PTR_ERR(name); - mutex_lock_nested(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex, - I_MUTEX_PARENT); - dentry = lookup_one_len(name, ipc_ns->mq_mnt->mnt_root, strlen(name)); + err = mnt_want_write(mnt); + if (err) + goto out_name; + mutex_lock_nested(&mnt->mnt_root->d_inode->i_mutex, I_MUTEX_PARENT); + dentry = lookup_one_len(name, mnt->mnt_root, strlen(name)); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); goto out_unlock; } - if (!dentry->d_inode) { - err = -ENOENT; - goto out_err; - } - inode = dentry->d_inode; - if (inode) + if (!inode) { + err = -ENOENT; + } else { ihold(inode); - err = mnt_want_write(ipc_ns->mq_mnt); - if (err) - goto out_err; - err = vfs_unlink(dentry->d_parent->d_inode, dentry); - mnt_drop_write(ipc_ns->mq_mnt); -out_err: + err = vfs_unlink(dentry->d_parent->d_inode, dentry); + } dput(dentry); out_unlock: - mutex_unlock(&ipc_ns->mq_mnt->mnt_root->d_inode->i_mutex); - putname(name); + mutex_unlock(&mnt->mnt_root->d_inode->i_mutex); if (inode) iput(inode); + mnt_drop_write(mnt); +out_name: + putname(name); return err; } From 515c7af85ed92696c311c53d53cb4898ff32d784 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 18 Aug 2012 16:11:37 -0400 Subject: [PATCH 0756/1098] x32: Use compat shims for {g,s}etsockopt Some of the arguments to {g,s}etsockopt are passed in userland pointers. If we try to use the 64bit entry point, we end up sometimes failing. For example, dhcpcd doesn't run in x32: # dhcpcd eth0 dhcpcd[1979]: version 5.5.6 starting dhcpcd[1979]: eth0: broadcasting for a lease dhcpcd[1979]: eth0: open_socket: Invalid argument dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor The code in particular is getting back EINVAL when doing: struct sock_fprog pf; setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf)); Diving into the kernel code, we can see: include/linux/filter.h: struct sock_fprog { unsigned short len; struct sock_filter __user *filter; }; net/core/sock.c: case SO_ATTACH_FILTER: ret = -EINVAL; if (optlen == sizeof(struct sock_fprog)) { struct sock_fprog fprog; ret = -EFAULT; if (copy_from_user(&fprog, optval, sizeof(fprog))) break; ret = sk_attach_filter(&fprog, sk); } break; arch/x86/syscalls/syscall_64.tbl: 54 common setsockopt sys_setsockopt 55 common getsockopt sys_getsockopt So for x64, sizeof(sock_fprog) is 16 bytes. For x86/x32, it's 8 bytes. This comes down to the pointer being 32bit for x32, which means we need to do structure size translation. But since x32 comes in directly to sys_setsockopt, it doesn't get translated like x86. After changing the syscall table and rebuilding glibc with the new kernel headers, dhcp runs fine in an x32 userland. Oddly, it seems like Linus noted the same thing during the initial port, but I guess that was missed/lost along the way: https://lkml.org/lkml/2011/8/26/452 [ hpa: tagging for -stable since this is an ABI fix. ] Bugzilla: https://bugs.gentoo.org/423649 Reported-by: Mads Signed-off-by: Mike Frysinger Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org Cc: H. J. Lu Cc: v3.4..v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/syscalls/syscall_64.tbl | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 29aed7ac2c02..a582bfed95bb 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt From 64f503076f9921fc714a2c79fb0fa520869d2c08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 18 Aug 2012 10:30:05 -0700 Subject: [PATCH 0757/1098] sections: Fix section conflicts in drivers/hwmon Signed-off-by: Andi Kleen Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 2 +- drivers/hwmon/w83627hf.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index faa16f80db9c..0fa356fe82cc 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -196,7 +196,7 @@ struct tjmax { int tjmax; }; -static struct tjmax __cpuinitconst tjmax_table[] = { +static const struct tjmax __cpuinitconst tjmax_table[] = { { "CPU D410", 100000 }, { "CPU D425", 100000 }, { "CPU D510", 100000 }, diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index ab4825205a9d..5b1a6a666441 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1206,7 +1206,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, int err = -ENODEV; u16 val; - static const __initdata char *names[] = { + static __initconst char *const names[] = { "W83627HF", "W83627THF", "W83697HF", From ebdc82899ec5ed35af1c79ed6a4eeda69dad9b90 Mon Sep 17 00:00:00 2001 From: Markus Trippelsdorf Date: Sat, 18 Aug 2012 18:35:51 -0600 Subject: [PATCH 0758/1098] dyndbg: fix for SOH in logging messages commit af7f2158fde was done against master, and clashed with structured logging's change of KERN_LEVEL to SOH. Bisected and fixed by Markus Trippelsdorf. Reported-by: Markus Trippelsdorf Signed-off-by: Jim Cromie Cc: Linus Torvalds Cc: Andrew Morton Cc: Jason Baron Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index cdd01c52c629..5e6e00bc1652 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1912,8 +1912,8 @@ int __dev_printk(const char *level, const struct device *dev, "DEVICE=+%s:%s", subsys, dev_name(dev)); } skip: - if (level[3]) - level_extra = &level[3]; /* skip past "" */ + if (level[2]) + level_extra = &level[2]; /* skip past KERN_SOH "L" */ return printk_emit(0, level[1] - '0', dictlen ? dict : NULL, dictlen, From a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:56 +1200 Subject: [PATCH 0759/1098] alpha: Don't export SOCK_NONBLOCK to user space. Currently we export SOCK_NONBLOCK to user space but that conflicts with the definition from glibc leading to compilation errors in user programs (e.g. see Debian bug #658460). The generic socket.h restricts the definition of SOCK_NONBLOCK to the kernel, as does the MIPS specific socket.h, so let's do the same on Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/socket.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5be..7d2f75be932e 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ From d8d5da129857bfd54b603771fca5409062167392 Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:57 +1200 Subject: [PATCH 0760/1098] alpha: Wire up cross memory attach syscalls Add sys_process_vm_readv and sys_process_vm_writev to Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/unistd.h | 4 +++- arch/alpha/kernel/systbls.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664a..a31a78eac9b9 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f114..b64157c98e02 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object From f2db633d301b4b50f5f93de0e8314cc81e9bc7de Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:58 +1200 Subject: [PATCH 0761/1098] alpha: Use new generic strncpy_from_user() and strnlen_user() Similar to x86/sparc/powerpc implementations except: 1) we implement an extremely efficient has_zero()/find_zero() sequence with both prep_zero_mask() and create_zero_mask() no-operations. 2) Our output from prep_zero_mask() differs in that only the lowest eight bits are used to represent the zero bytes nevertheless it can be safely ORed with other similar masks from prep_zero_mask() and forms input to create_zero_mask(), the two fundamental properties prep_zero_mask() must satisfy. Tests on EV67 and EV68 CPUs revealed that the generic code is essentially as fast (to within 0.5% of CPU cycles) of the old Alpha specific code for large quadword-aligned strings, despite the 30% extra CPU instructions executed. In contrast, the generic code for unaligned strings is substantially slower (by more than a factor of 3) than the old Alpha specific code. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 2 + arch/alpha/include/asm/uaccess.h | 34 +- arch/alpha/include/asm/word-at-a-time.h | 55 +++ arch/alpha/kernel/alpha_ksyms.c | 2 - arch/alpha/lib/Makefile | 2 - arch/alpha/lib/ev6-strncpy_from_user.S | 424 ------------------------ arch/alpha/lib/ev67-strlen_user.S | 107 ------ arch/alpha/lib/strlen_user.S | 91 ----- arch/alpha/lib/strncpy_from_user.S | 339 ------------------- 9 files changed, 62 insertions(+), 994 deletions(-) create mode 100644 arch/alpha/include/asm/word-at-a-time.h delete mode 100644 arch/alpha/lib/ev6-strncpy_from_user.S delete mode 100644 arch/alpha/lib/ev67-strlen_user.S delete mode 100644 arch/alpha/lib/strlen_user.S delete mode 100644 arch/alpha/lib/strncpy_from_user.S diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645cc..9944dedee5b1 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e3..766fdfde2b7a 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 000000000000..6b340d0f1521 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc2..a354277bbaa7 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -74,8 +74,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b78..59660743237c 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178cacc..000000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a6..000000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e96479..000000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff7..000000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user From be53db6e4edd9dc013b21a929ad2b142dea8b9c0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:40:59 +1200 Subject: [PATCH 0762/1098] alpha: take a bunch of syscalls into osf_sys.c New helper: current_thread_info(). Allows to do a bunch of odd syscalls in C. While we are at it, there had never been a reason to do osf_getpriority() in assembler. We also get "namespace"-aware (read: consistent with getuid(2), etc.) behaviour from getx?id() syscalls now. Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/ptrace.h | 5 +- arch/alpha/kernel/entry.S | 109 -------------------------------- arch/alpha/kernel/osf_sys.c | 49 ++++++++++++++ arch/alpha/kernel/systbls.S | 2 +- kernel/timer.c | 9 --- 5 files changed, 54 insertions(+), 120 deletions(-) diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f26..b87755a19554 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2f..22b0c4d414a7 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -796,115 +796,6 @@ sys_rt_sigreturn: br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - .align 4 .globl sys_execve .ent sys_execve diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af6..bc1acdda7a5e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index b64157c98e02..2ac6b45c3e00 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn diff --git a/kernel/timer.c b/kernel/timer.c index a61c09374eba..8c5e7b908c68 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1407,13 +1407,6 @@ SYSCALL_DEFINE1(alarm, unsigned int, seconds) #endif -#ifndef __alpha__ - -/* - * The Alpha uses getxpid, getxuid, and getxgid instead. Maybe this - * should be moved into arch/i386 instead? - */ - /** * sys_getpid - return the thread group id of the current process * @@ -1469,8 +1462,6 @@ SYSCALL_DEFINE0(getegid) return from_kgid_munged(current_user_ns(), current_egid()); } -#endif - static void process_timeout(unsigned long __data) { wake_up_process((struct task_struct *)__data); From 28d353d9891c28496e366bebe4e65233f59ad1f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:41:00 +1200 Subject: [PATCH 0763/1098] alpha: take kernel_execve() out of entry.S Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/kernel/alpha_ksyms.c | 1 - arch/alpha/kernel/entry.S | 52 --------------------------------- arch/alpha/kernel/process.c | 19 ++++++++++++ 3 files changed, 19 insertions(+), 53 deletions(-) diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index a354277bbaa7..15fa821d09cd 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 22b0c4d414a7..ec0da0567ab5 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8e..d6fde98b74b3 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); From 0bcc426b1defa6b629dfa722537cab38876a3ce4 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Sun, 19 Aug 2012 14:41:01 +1200 Subject: [PATCH 0764/1098] alpha/mm/fault.c: Port OOM changes to do_page_fault Commit d065bd810b6d ("mm: retry page fault when blocking on disk transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to ALPHA. Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Acked-by: Matt Turner Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/mm/fault.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84ef..0c4132dd3507 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; From 0be421862b857e61964435ffcaa7499cf77a5e5a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 19 Aug 2012 14:41:02 +1200 Subject: [PATCH 0765/1098] alpha: fix fpu.h usage in userspace After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the fpu.h header which we install for userland started depending on special_insns.h which is not installed. However, fpu.h only uses that for __KERNEL__ code, so protect the inclusion the same way to avoid build breakage in glibc: /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory Cc: stable@vger.kernel.org Reported-by: Matt Turner Signed-off-by: Mike Frysinger Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fpu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885faa..e477bcd5b94a 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include +#endif /* * Alpha floating-point control register defines: From 67a806d9499353fabd5b5ff07337f3aa88a1c3ba Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Sun, 19 Aug 2012 14:41:03 +1200 Subject: [PATCH 0766/1098] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occurred during an alpha build: net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Cc: Signed-off-by: Mel Gorman Signed-off-by: Fengguang Wu Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3bc..c2cbe4fc391c 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) From d1b5153f3ec83789b71d64efaf2a880c8fe6358e Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:41:04 +1200 Subject: [PATCH 0767/1098] alpha: Fix fall-out from disintegrating asm/system.h Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed asm/system.h however arch/alpha/oprofile/common.c requires definitions that were shifted from asm/system.h to asm/special_insns.h. Include that. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/oprofile/common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa215..b8ce18f485d3 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "op_impl.h" From b7ca69289680cf631fb20b7d436467c4ec1153cd Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 3 Aug 2012 08:43:01 -0500 Subject: [PATCH 0768/1098] CIFS: Protect i_nlink from being negative that can cause warning messages. Pavel had initially suggested a smaller patch around drop_nlink, after a similar problem was discovered NFS. Protecting additional places where nlink is touched was suggested by Jeff Layton and is included in this. Reviewed-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Steve French --- fs/cifs/inode.c | 24 ++++++++++++++++-------- fs/cifs/link.c | 2 ++ 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 7354877fa3bd..cb79c7edecb0 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -124,10 +124,10 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) { struct cifsInodeInfo *cifs_i = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - unsigned long oldtime = cifs_i->time; cifs_revalidate_cache(inode, fattr); + spin_lock(&inode->i_lock); inode->i_atime = fattr->cf_atime; inode->i_mtime = fattr->cf_mtime; inode->i_ctime = fattr->cf_ctime; @@ -148,9 +148,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) else cifs_i->time = jiffies; - cFYI(1, "inode 0x%p old_time=%ld new_time=%ld", inode, - oldtime, cifs_i->time); - cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING; cifs_i->server_eof = fattr->cf_eof; @@ -158,7 +155,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) * Can't safely change the file size here if the client is writing to * it due to potential races. */ - spin_lock(&inode->i_lock); if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) { i_size_write(inode, fattr->cf_eof); @@ -859,12 +855,14 @@ struct inode *cifs_root_iget(struct super_block *sb) if (rc && tcon->ipc) { cFYI(1, "ipc connection - fake read inode"); + spin_lock(&inode->i_lock); inode->i_mode |= S_IFDIR; set_nlink(inode, 2); inode->i_op = &cifs_ipc_inode_ops; inode->i_fop = &simple_dir_operations; inode->i_uid = cifs_sb->mnt_uid; inode->i_gid = cifs_sb->mnt_gid; + spin_unlock(&inode->i_lock); } else if (rc) { iget_failed(inode); inode = ERR_PTR(rc); @@ -1110,6 +1108,15 @@ undo_setattr: goto out_close; } +/* copied from fs/nfs/dir.c with small changes */ +static void +cifs_drop_nlink(struct inode *inode) +{ + spin_lock(&inode->i_lock); + if (inode->i_nlink > 0) + drop_nlink(inode); + spin_unlock(&inode->i_lock); +} /* * If dentry->d_inode is null (usually meaning the cached dentry @@ -1166,13 +1173,13 @@ retry_std_delete: psx_del_no_retry: if (!rc) { if (inode) - drop_nlink(inode); + cifs_drop_nlink(inode); } else if (rc == -ENOENT) { d_drop(dentry); } else if (rc == -ETXTBSY) { rc = cifs_rename_pending_delete(full_path, dentry, xid); if (rc == 0) - drop_nlink(inode); + cifs_drop_nlink(inode); } else if ((rc == -EACCES) && (dosattr == 0) && inode) { attrs = kzalloc(sizeof(*attrs), GFP_KERNEL); if (attrs == NULL) { @@ -1241,9 +1248,10 @@ cifs_mkdir_qinfo(struct inode *inode, struct dentry *dentry, umode_t mode, * setting nlink not necessary except in cases where we failed to get it * from the server or was set bogus */ + spin_lock(&dentry->d_inode->i_lock); if ((dentry->d_inode) && (dentry->d_inode->i_nlink < 2)) set_nlink(dentry->d_inode, 2); - + spin_unlock(&dentry->d_inode->i_lock); mode &= ~current_umask(); /* must turn on setgid bit if parent dir has it */ if (inode->i_mode & S_ISGID) diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 09e4b3ae4564..e6ce3b112875 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -433,7 +433,9 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode, if (old_file->d_inode) { cifsInode = CIFS_I(old_file->d_inode); if (rc == 0) { + spin_lock(&old_file->d_inode->i_lock); inc_nlink(old_file->d_inode); + spin_unlock(&old_file->d_inode->i_lock); /* BB should we make this contingent on superblock flag NOATIME? */ /* old_file->d_inode->i_ctime = CURRENT_TIME;*/ /* parent dir timestamps will update from srv From 7411286088d5ba879e9ffcaaa296f657642ef2c4 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Fri, 27 Jul 2012 01:20:41 +0400 Subject: [PATCH 0769/1098] CIFS: Fix log messages in packet checking for SMB2 Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/smb2misc.c | 16 +++++++++------- fs/cifs/smb2pdu.h | 10 ++++++---- 2 files changed, 15 insertions(+), 11 deletions(-) diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index a4ff5d547554..e4d3b9964167 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -52,7 +52,8 @@ check_smb2_hdr(struct smb2_hdr *hdr, __u64 mid) cERROR(1, "Bad protocol string signature header %x", *(unsigned int *) hdr->ProtocolId); if (mid != hdr->MessageId) - cERROR(1, "Mids do not match"); + cERROR(1, "Mids do not match: %llu and %llu", mid, + hdr->MessageId); } cERROR(1, "Bad SMB detected. The Mid=%llu", hdr->MessageId); return 1; @@ -107,7 +108,7 @@ smb2_check_message(char *buf, unsigned int length) * ie Validate the wct via smb2_struct_sizes table above */ - if (length < 2 + sizeof(struct smb2_hdr)) { + if (length < sizeof(struct smb2_pdu)) { if ((length >= sizeof(struct smb2_hdr)) && (hdr->Status != 0)) { pdu->StructureSize2 = 0; /* @@ -121,15 +122,15 @@ smb2_check_message(char *buf, unsigned int length) return 1; } if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE - 4) { - cERROR(1, "SMB length greater than maximum, mid=%lld", mid); + cERROR(1, "SMB length greater than maximum, mid=%llu", mid); return 1; } if (check_smb2_hdr(hdr, mid)) return 1; - if (hdr->StructureSize != SMB2_HEADER_SIZE) { - cERROR(1, "Illegal structure size %d", + if (hdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { + cERROR(1, "Illegal structure size %u", le16_to_cpu(hdr->StructureSize)); return 1; } @@ -161,8 +162,9 @@ smb2_check_message(char *buf, unsigned int length) if (4 + len != clc_len) { cFYI(1, "Calculated size %u length %u mismatch mid %llu", clc_len, 4 + len, mid); - if (clc_len == 4 + len + 1) /* BB FIXME (fix samba) */ - return 0; /* BB workaround Samba 3 bug SessSetup rsp */ + /* server can return one byte more */ + if (clc_len == 4 + len + 1) + return 0; return 1; } return 0; diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index f37a1b41b402..c5fbfac5d576 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -87,10 +87,6 @@ #define SMB2_PROTO_NUMBER __constant_cpu_to_le32(0x424d53fe) -#define SMB2_HEADER_SIZE __constant_le16_to_cpu(64) - -#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9) - /* * SMB2 Header Definition * @@ -99,6 +95,9 @@ * "PDU" : "Protocol Data Unit" (ie a network "frame") * */ + +#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64) + struct smb2_hdr { __be32 smb2_buf_length; /* big endian on wire */ /* length is only two or three bytes - with @@ -140,6 +139,9 @@ struct smb2_pdu { * command code name for the struct. Note that structures must be packed. * */ + +#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9) + struct smb2_err_rsp { struct smb2_hdr hdr; __le16 StructureSize; From 985e4ff016b5f3d95c12fe8073d1df89300dab3d Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 3 Aug 2012 09:42:45 -0500 Subject: [PATCH 0770/1098] cifs: print error code if smb signature verification fails While trying to debug a SMB signature related issue with Windows Servers figured out it might be easier to debug if we print the error code from cifs_verify_signature(). Also, fix indendation while at it. Signed-off-by: Suresh Jayaraman Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 11 ++++++++--- fs/cifs/transport.c | 9 ++++++--- 2 files changed, 14 insertions(+), 6 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 074923ce593d..f0cf934ba877 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1576,9 +1576,14 @@ cifs_readv_callback(struct mid_q_entry *mid) /* result already set, check signature */ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { - if (cifs_verify_signature(rdata->iov, rdata->nr_iov, - server, mid->sequence_number + 1)) - cERROR(1, "Unexpected SMB signature"); + int rc = 0; + + rc = cifs_verify_signature(rdata->iov, rdata->nr_iov, + server, + mid->sequence_number + 1); + if (rc) + cERROR(1, "SMB signature verification returned " + "error = %d", rc); } /* FIXME: should this be counted toward the initiating task? */ task_io_account_read(rdata->bytes); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 83867ef348df..d9b639b95fa8 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -503,13 +503,16 @@ cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, /* convert the length into a more usable form */ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { struct kvec iov; + int rc = 0; iov.iov_base = mid->resp_buf; iov.iov_len = len; /* FIXME: add code to kill session */ - if (cifs_verify_signature(&iov, 1, server, - mid->sequence_number + 1) != 0) - cERROR(1, "Unexpected SMB signature"); + rc = cifs_verify_signature(&iov, 1, server, + mid->sequence_number + 1); + if (rc) + cERROR(1, "SMB signature verification returned error = " + "%d", rc); } /* BB special case reconnect tid and uid here? */ From ea7b4887e7266b93fa0c203cc452a926a0fef4f0 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Fri, 17 Aug 2012 18:02:19 +0400 Subject: [PATCH 0771/1098] CIFS: Fix cifs_do_create error hadnling Commit d2c127197dfc0b2bae62a52e1e0d3e3ff493919e caused a regression in cifs_do_create error handling. Fix this by closing a file handle in the case of a get_inode_info(_unix) error. Also remove unnecessary checks for newinode being NULL. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/dir.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index cbe709ad6663..781025be48bc 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -356,19 +356,12 @@ cifs_create_get_file_info: cifs_create_set_dentry: if (rc != 0) { cFYI(1, "Create worked, get_inode_info failed rc = %d", rc); + CIFSSMBClose(xid, tcon, *fileHandle); goto out; } d_drop(direntry); d_add(direntry, newinode); - /* ENOENT for create? How weird... */ - rc = -ENOENT; - if (!newinode) { - CIFSSMBClose(xid, tcon, *fileHandle); - goto out; - } - rc = 0; - out: kfree(buf); kfree(full_path); From 94f3ec6b2222eb5c0af0c784f0656ff5b909d870 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Aug 2012 18:55:15 +0300 Subject: [PATCH 0772/1098] sound: oss/sb_audio: prevent divide by zero bug Speed comes from get_user() in audio_ioctl(). We use it to set the "s" variable before clamping it to valid values so it could lead to a divide by zero bug. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/oss/sb_audio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/oss/sb_audio.c b/sound/oss/sb_audio.c index 733b014ec7d1..b2b3c014221a 100644 --- a/sound/oss/sb_audio.c +++ b/sound/oss/sb_audio.c @@ -575,13 +575,15 @@ static int jazz16_audio_set_speed(int dev, int speed) if (speed > 0) { int tmp; - int s = speed * devc->channels; + int s; if (speed < 5000) speed = 5000; if (speed > 44100) speed = 44100; + s = speed * devc->channels; + devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; tmp = 256 - devc->tconst; From 8513915accc611e576dbebb93422c257e7e68be8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 17:43:05 -0700 Subject: [PATCH 0773/1098] ALSA: fix pcm.h kernel-doc warning and notation Fix kernel-doc warning in and add function name to make the kernel-doc notation complete. Warning(include/sound/pcm.h:1081): No description found for parameter 'substream' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- include/sound/pcm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index c75c0d1a85e2..cdca2ab1e711 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -1075,7 +1075,8 @@ static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max) const char *snd_pcm_format_name(snd_pcm_format_t format); /** - * Get a string naming the direction of a stream + * snd_pcm_stream_str - Get a string naming the direction of a stream + * @substream: the pcm substream instance */ static inline const char *snd_pcm_stream_str(struct snd_pcm_substream *substream) { From ce026cb9cbf1d529652394ea91fb8a459072be91 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 13 Jul 2012 18:04:23 -0500 Subject: [PATCH 0774/1098] crypto: caam - fix possible deadlock condition commit "crypto: caam - use non-irq versions of spinlocks for job rings" made two bad assumptions: (a) The caam_jr_enqueue lock isn't used in softirq context. Not true: jr_enqueue can be interrupted by an incoming net interrupt and the received packet may be sent for encryption, via caam_jr_enqueue in softirq context, thereby inducing a deadlock. This is evidenced when running netperf over an IPSec tunnel between two P4080's, with spinlock debugging turned on: [ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70 [ 892.098747] Call Trace: [ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70 [ 892.129629] Call Trace: [ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334 [ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818 [ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104 [ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18 [ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0 [ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430 [ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84 [ 892.281474] [ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334 [ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818 [ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104 [ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18 [ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70 [ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570 [ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0 [ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28 [ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98 [ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98 [ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490 [ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4 [ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04 [ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec [ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164 [ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc [ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc [ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c [ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c (b) since the caam_jr_dequeue lock is only used in bh context, then semantically it should use _bh spin_lock types. spin_lock_bh semantics are to disable back-halves, and used when a lock is shared between softirq (bh) context and process and/or h/w IRQ context. Since the lock is only used within softirq context, and this tasklet is atomic, there is no need to do the additional work to disable back halves. This patch adds back-half disabling protection to caam_jr_enqueue spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b). Signed-off-by: Kim Phillips Signed-off-by: Herbert Xu --- drivers/crypto/caam/jr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 53c8c51d5881..93d14070141a 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -63,7 +63,7 @@ static void caam_jr_dequeue(unsigned long devarg) head = ACCESS_ONCE(jrp->head); - spin_lock_bh(&jrp->outlock); + spin_lock(&jrp->outlock); sw_idx = tail = jrp->tail; hw_idx = jrp->out_ring_read_index; @@ -115,7 +115,7 @@ static void caam_jr_dequeue(unsigned long devarg) jrp->tail = tail; } - spin_unlock_bh(&jrp->outlock); + spin_unlock(&jrp->outlock); /* Finally, execute user's callback */ usercall(dev, userdesc, userstatus, userarg); @@ -236,14 +236,14 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, return -EIO; } - spin_lock(&jrp->inplock); + spin_lock_bh(&jrp->inplock); head = jrp->head; tail = ACCESS_ONCE(jrp->tail); if (!rd_reg32(&jrp->rregs->inpring_avail) || CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) { - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE); return -EBUSY; } @@ -265,7 +265,7 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, wr_reg32(&jrp->rregs->inpring_jobadd, 1); - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); return 0; } From aaf265c22e48f10c94ad04d23b6ab0c88f554d35 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:58 +0200 Subject: [PATCH 0775/1098] ALSA: sound/atmel/abdac.c: fix error return code Initialize retval before returning from a failed call to ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/atmel/abdac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index 98554f4882b7..277ebce23a45 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -452,6 +452,7 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev) dac->regs = ioremap(regs->start, resource_size(regs)); if (!dac->regs) { dev_dbg(&pdev->dev, "could not remap register memory\n"); + retval = -ENOMEM; goto out_free_card; } From 0c23e46eb4878422c25351ff54ab0fe80c643809 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:57 +0200 Subject: [PATCH 0776/1098] ALSA: sound/atmel/ac97c.c: fix error return code In the first case, the second test of whether retval is negative is redundant. It is dropped and the previous and subsequent tests are combined. In the second case, add an initialization of retval on failure of ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 3c8d3ba7ddfc..9052aff37f64 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -278,14 +278,9 @@ static int atmel_ac97c_capture_hw_params(struct snd_pcm_substream *substream, if (retval < 0) return retval; /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ - if (cpu_is_at32ap7000()) { - if (retval < 0) - return retval; - /* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */ - if (retval == 1) - if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) - dw_dma_cyclic_free(chip->dma.rx_chan); - } + if (cpu_is_at32ap7000() && retval == 1) + if (test_and_clear_bit(DMA_RX_READY, &chip->flags)) + dw_dma_cyclic_free(chip->dma.rx_chan); /* Set restrictions to params. */ mutex_lock(&opened_mutex); @@ -980,6 +975,7 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev) if (!chip->regs) { dev_dbg(&pdev->dev, "could not remap register memory\n"); + retval = -ENOMEM; goto err_ioremap; } From 4d8ce1c9966663bad69e738952179f3cc52710bf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:56 +0200 Subject: [PATCH 0777/1098] ALSA: sound/pci/ctxfi/ctatc.c: fix error return code Initialize err before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/ctxfi/ctatc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c index 8e40262d4117..2f6e9c762d3f 100644 --- a/sound/pci/ctxfi/ctatc.c +++ b/sound/pci/ctxfi/ctatc.c @@ -1725,8 +1725,10 @@ int __devinit ct_atc_create(struct snd_card *card, struct pci_dev *pci, atc_connect_resources(atc); atc->timer = ct_timer_new(atc); - if (!atc->timer) + if (!atc->timer) { + err = -ENOMEM; goto error1; + } err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, atc, &ops); if (err < 0) From ae970eb45d8a1ea4506be23c3f776225b9575d0e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:55 +0200 Subject: [PATCH 0778/1098] ALSA: sound/pci/sis7019.c: fix error return code Initialize rc before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/sis7019.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index 512434efcc31..805ab6e9a78f 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -1377,8 +1377,9 @@ static int __devinit sis_chip_create(struct snd_card *card, if (rc) goto error_out_cleanup; - if (request_irq(pci->irq, sis_interrupt, IRQF_SHARED, KBUILD_MODNAME, - sis)) { + rc = request_irq(pci->irq, sis_interrupt, IRQF_SHARED, KBUILD_MODNAME, + sis); + if (rc) { dev_err(&pci->dev, "unable to allocate irq %d\n", sis->irq); goto error_out_cleanup; } From b17cbdd85f84c8323189416da6e9701d2793b0e5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:54 +0200 Subject: [PATCH 0779/1098] ALSA: sound/pci/rme9652/hdspm.c: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdspm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index b8ac8710f47f..b12308b5ba2a 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6585,7 +6585,7 @@ static int __devinit snd_hdspm_create(struct snd_card *card, snd_printk(KERN_ERR "HDSPM: " "unable to kmalloc Mixer memory of %d Bytes\n", (int)sizeof(struct hdspm_mixer)); - return err; + return -ENOMEM; } hdspm->port_names_in = NULL; From c86b93628e5649fd7bb0574b570a51b2b02d586c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:59 +0200 Subject: [PATCH 0780/1098] ALSA: sound/ppc/snd_ps3.c: fix error return code Initialize ret before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/ppc/snd_ps3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index 1aa52eff526a..9b18b5243a56 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -1040,6 +1040,7 @@ static int __devinit snd_ps3_driver_probe(struct ps3_system_bus_device *dev) GFP_KERNEL); if (!the_card.null_buffer_start_vaddr) { pr_info("%s: nullbuffer alloc failed\n", __func__); + ret = -ENOMEM; goto clean_preallocate; } pr_debug("%s: null vaddr=%p dma=%#llx\n", __func__, From 3296193d1421c2d6f9e49e181cecfd917f0f5764 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Aug 2012 13:20:23 +0000 Subject: [PATCH 0781/1098] dt: introduce for_each_available_child_of_node, of_get_next_available_child Macro for_each_child_of_node() makes it easy to iterate over all of the children for a given device tree node, including those nodes that are marked as unavailable (i.e. status = "disabled"). Introduce for_each_available_child_of_node(), which is like for_each_child_of_node(), but it automatically skips unavailable nodes. This also requires the introduction of helper function of_get_next_available_child(), which returns the next available child node. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/of/base.c | 27 +++++++++++++++++++++++++++ include/linux/of.h | 7 +++++++ 2 files changed, 34 insertions(+) diff --git a/drivers/of/base.c b/drivers/of/base.c index c181b94abc36..d4a1c9a043e1 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -363,6 +363,33 @@ struct device_node *of_get_next_child(const struct device_node *node, } EXPORT_SYMBOL(of_get_next_child); +/** + * of_get_next_available_child - Find the next available child node + * @node: parent node + * @prev: previous child of the parent node, or NULL to get first + * + * This function is like of_get_next_child(), except that it + * automatically skips any disabled nodes (i.e. status = "disabled"). + */ +struct device_node *of_get_next_available_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + + read_lock(&devtree_lock); + next = prev ? prev->sibling : node->child; + for (; next; next = next->sibling) { + if (!of_device_is_available(next)) + continue; + if (of_node_get(next)) + break; + } + of_node_put(prev); + read_unlock(&devtree_lock); + return next; +} +EXPORT_SYMBOL(of_get_next_available_child); + /** * of_find_node_by_path - Find a node matching a full OF path * @path: The full path to match diff --git a/include/linux/of.h b/include/linux/of.h index 5919ee33f2b7..1b1163225f3b 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -190,10 +190,17 @@ extern struct device_node *of_get_parent(const struct device_node *node); extern struct device_node *of_get_next_parent(struct device_node *node); extern struct device_node *of_get_next_child(const struct device_node *node, struct device_node *prev); +extern struct device_node *of_get_next_available_child( + const struct device_node *node, struct device_node *prev); + #define for_each_child_of_node(parent, child) \ for (child = of_get_next_child(parent, NULL); child != NULL; \ child = of_get_next_child(parent, child)) +#define for_each_available_child_of_node(parent, child) \ + for (child = of_get_next_available_child(parent, NULL); child != NULL; \ + child = of_get_next_available_child(parent, child)) + static inline int of_get_child_count(const struct device_node *np) { struct device_node *child; From 61abcb7b058853900a3092f2c21988a444e3aaea Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 14 Aug 2012 13:20:24 +0000 Subject: [PATCH 0782/1098] netdev/phy: skip disabled mdio-mux nodes The mdio-mux driver scans all child mdio nodes, without regard to whether the node is actually used. Some device trees include all possible mdio-mux nodes and rely on the boot loader to disable those that are not present, based on some run-time configuration. Those nodes need to be skipped. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 5c120189ec86..4d4d25efc1e1 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -132,7 +132,7 @@ int mdio_mux_init(struct device *dev, pb->mii_bus = parent_bus; ret_val = -ENODEV; - for_each_child_of_node(dev->of_node, child_bus_node) { + for_each_available_child_of_node(dev->of_node, child_bus_node) { u32 v; r = of_property_read_u32(child_bus_node, "reg", &v); From d0418bb7123f44b23d69ac349eec7daf9103472f Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 14 Aug 2012 20:33:29 +0000 Subject: [PATCH 0783/1098] net: sh_eth: Add eth support for R8A7779 device Signed-off-by: Phil Edworthy Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/Kconfig | 4 ++-- drivers/net/ethernet/renesas/sh_eth.c | 11 ++++++++--- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig index 46df3a04030c..24c2305d7948 100644 --- a/drivers/net/ethernet/renesas/Kconfig +++ b/drivers/net/ethernet/renesas/Kconfig @@ -8,7 +8,7 @@ config SH_ETH (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7734 || \ - CPU_SUBTYPE_SH7757 || ARCH_R8A7740) + CPU_SUBTYPE_SH7757 || ARCH_R8A7740 || ARCH_R8A7779) select CRC32 select NET_CORE select MII @@ -18,4 +18,4 @@ config SH_ETH Renesas SuperH Ethernet device driver. This driver supporting CPUs are: - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757, - and R8A7740. + R8A7740 and R8A7779. diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index af0b867a6cf6..bad8f2eec9b4 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -78,7 +78,7 @@ static void sh_eth_select_mii(struct net_device *ndev) #endif /* There is CPU dependent code */ -#if defined(CONFIG_CPU_SUBTYPE_SH7724) +#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779) #define SH_ETH_RESET_DEFAULT 1 static void sh_eth_set_duplex(struct net_device *ndev) { @@ -93,13 +93,18 @@ static void sh_eth_set_duplex(struct net_device *ndev) static void sh_eth_set_rate(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); + unsigned int bits = ECMR_RTM; + +#if defined(CONFIG_ARCH_R8A7779) + bits |= ECMR_ELB; +#endif switch (mdp->speed) { case 10: /* 10BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR); break; case 100:/* 100BASE */ - sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR); + sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR); break; default: break; From 10cbc1d97a7c7f9ae862fffe27b771ef0da9c461 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 15 Aug 2012 03:42:57 +0000 Subject: [PATCH 0784/1098] net: qmi_wwan: new devices: UML290 and K5006-Z MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer firmware versions for the Pantech UML290 use a different subclass ID. The Windows driver match on both IDs, so we do that as well. The ZTE (Vodafone) K5006-Z is a new device. Cc: Dan Williams Cc: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index aaa061b7355d..328397c66730 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -373,6 +373,10 @@ static const struct usb_device_id products[] = { USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, + { /* Pantech UML290 - newer firmware */ + USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + .driver_info = (unsigned long)&qmi_wwan_shared, + }, /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ @@ -382,6 +386,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */ + {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */ {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ From b3f0db1c772ca8f08feabe9d2636dcc1103c5cb8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Wed, 15 Aug 2012 21:53:38 +0000 Subject: [PATCH 0785/1098] smsc75xx: add missing entry to MAINTAINERS Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f87589075552..560bd30b1d7f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7289,6 +7289,12 @@ W: http://www.connecttech.com S: Supported F: drivers/usb/serial/whiteheat* +USB SMSC75XX ETHERNET DRIVER +M: Steve Glendinning +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/usb/smsc75xx.* + USB SMSC95XX ETHERNET DRIVER M: Steve Glendinning L: netdev@vger.kernel.org From 82a820e8d75f7f3fcd1af24609da79d7d89d5450 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:56 +0000 Subject: [PATCH 0786/1098] drivers/net/wimax/i2400m/fw.c: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wimax/i2400m/fw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 283237f6f074..def12b38cbf7 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -326,8 +326,10 @@ int i2400m_barker_db_init(const char *_options) unsigned barker; options_orig = kstrdup(_options, GFP_KERNEL); - if (options_orig == NULL) + if (options_orig == NULL) { + result = -ENOMEM; goto error_parse; + } options = options_orig; while ((token = strsep(&options, ",")) != NULL) { From 623d896b361f404de5ed24e312a58646ee04207d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:57 +0000 Subject: [PATCH 0787/1098] drivers/net/wan/dscc4.c: fix error return code Move up the initialization of rc so that failure of pci_alloc_consistent returns -ENOMEM as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wan/dscc4.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 9eb6479306d6..ef36cafd44b7 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -774,14 +774,15 @@ static int __devinit dscc4_init_one(struct pci_dev *pdev, } /* Global interrupt queue */ writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1); + + rc = -ENOMEM; + priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev, IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma); if (!priv->iqcfg) goto err_free_irq_5; writel(priv->iqcfg_dma, ioaddr + IQCFG); - rc = -ENOMEM; - /* * SCC 0-3 private rx/tx irq structures * IQRX/TXi needs to be set soon. Learned it the hard way... From 9915e67eb1134b4710a4888a3e041c757869e0e2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 16 Aug 2012 21:46:58 +0000 Subject: [PATCH 0788/1098] drivers/net/irda: fix error return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/irda/ks959-sir.c | 1 + drivers/net/irda/ksdazzle-sir.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 824e2a93fe8a..5f3aeac3f86d 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -542,6 +542,7 @@ static int ks959_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 5a278ab83c2f..2d4b6a1ab202 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -436,6 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { + err = -ENOMEM; dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } From c41999a23929f30808bae6009d8065052d4d73fd Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 20 Aug 2012 11:17:00 +0200 Subject: [PATCH 0789/1098] ALSA: hda - don't create dysfunctional mixer controls for ca0132 It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1038651 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_ca0132.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9c0ec0a55bef..49750a96d649 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -275,6 +275,10 @@ static int _add_switch(struct hda_codec *codec, hda_nid_t nid, const char *pfx, int type = dir ? HDA_INPUT : HDA_OUTPUT; struct snd_kcontrol_new knew = HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type); + if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_MUTE) == 0) { + snd_printdd("Skipping '%s %s Switch' (no mute on node 0x%x)\n", pfx, dirstr[dir], nid); + return 0; + } sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]); return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); } @@ -286,6 +290,10 @@ static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx, int type = dir ? HDA_INPUT : HDA_OUTPUT; struct snd_kcontrol_new knew = HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type); + if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_NUM_STEPS) == 0) { + snd_printdd("Skipping '%s %s Volume' (no amp on node 0x%x)\n", pfx, dirstr[dir], nid); + return 0; + } sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]); return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); } From c0de08d04215031d68fa13af36f347a6cfa252ca Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Thu, 16 Aug 2012 22:02:58 +0000 Subject: [PATCH 0790/1098] af_packet: don't emit packet on orig fanout group If a packet is emitted on one socket in one group of fanout sockets, it is transmitted again. It is thus read again on one of the sockets of the fanout group. This result in a loop for software which generate packets when receiving one. This retransmission is not the intended behavior: a fanout group must behave like a single socket. The packet should not be transmitted on a socket if it originates from a socket belonging to the same fanout group. This patch fixes the issue by changing the transmission check to take fanout group info account. Reported-by: Aleksandr Kotov Signed-off-by: Eric Leblond Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ net/core/dev.c | 16 ++++++++++++++-- net/packet/af_packet.c | 9 +++++++++ 3 files changed, 25 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3560d688161e..59dc05f38247 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1522,6 +1522,8 @@ struct packet_type { struct sk_buff **(*gro_receive)(struct sk_buff **head, struct sk_buff *skb); int (*gro_complete)(struct sk_buff *skb); + bool (*id_match)(struct packet_type *ptype, + struct sock *sk); void *af_packet_priv; struct list_head list; }; diff --git a/net/core/dev.c b/net/core/dev.c index a39354ee1432..debd9372472f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1642,6 +1642,19 @@ static inline int deliver_skb(struct sk_buff *skb, return pt_prev->func(skb, skb->dev, pt_prev, orig_dev); } +static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb) +{ + if (ptype->af_packet_priv == NULL) + return false; + + if (ptype->id_match) + return ptype->id_match(ptype, skb->sk); + else if ((struct sock *)ptype->af_packet_priv == skb->sk) + return true; + + return false; +} + /* * Support routine. Sends outgoing frames to any network * taps currently in use. @@ -1659,8 +1672,7 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) * they originated from - MvS (miquels@drinkel.ow.org) */ if ((ptype->dev == dev || !ptype->dev) && - (ptype->af_packet_priv == NULL || - (struct sock *)ptype->af_packet_priv != skb->sk)) { + (!skb_loop_sk(ptype, skb))) { if (pt_prev) { deliver_skb(skb2, pt_prev, skb->dev); pt_prev = ptype; diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 8ac890a1a4c0..aee7196aac36 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1273,6 +1273,14 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po) spin_unlock(&f->lock); } +bool match_fanout_group(struct packet_type *ptype, struct sock * sk) +{ + if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout) + return true; + + return false; +} + static int fanout_add(struct sock *sk, u16 id, u16 type_flags) { struct packet_sock *po = pkt_sk(sk); @@ -1325,6 +1333,7 @@ static int fanout_add(struct sock *sk, u16 id, u16 type_flags) match->prot_hook.dev = po->prot_hook.dev; match->prot_hook.func = packet_rcv_fanout; match->prot_hook.af_packet_priv = match; + match->prot_hook.id_match = match_fanout_group; dev_add_pack(&match->prot_hook); list_add(&match->list, &fanout_list); } From d92c7f8aabae913de16eb855b19cd2002c341896 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 17 Aug 2012 10:33:12 +0000 Subject: [PATCH 0791/1098] caif: Do not dereference NULL in chnl_recv_cb() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In net/caif/chnl_net.c::chnl_recv_cb() we call skb_header_pointer() which may return NULL, but we do not check for a NULL pointer before dereferencing it. This patch adds such a NULL check and properly free's allocated memory and return an error (-EINVAL) on failure - much better than crashing.. Signed-off-by: Jesper Juhl Acked-by: Sjur Brændeland Signed-off-by: David S. Miller --- net/caif/chnl_net.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c index 69771c04ba8f..e597733affb8 100644 --- a/net/caif/chnl_net.c +++ b/net/caif/chnl_net.c @@ -94,6 +94,10 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt) /* check the version of IP */ ip_version = skb_header_pointer(skb, 0, 1, &buf); + if (!ip_version) { + kfree_skb(skb); + return -EINVAL; + } switch (*ip_version >> 4) { case 4: From ae4d8cf299dbea4ce387a01da6f723c4050b31a7 Mon Sep 17 00:00:00 2001 From: Kelvin Cheung Date: Sat, 18 Aug 2012 00:16:23 +0000 Subject: [PATCH 0792/1098] net/stmmac: fix issue of clk_get for Loongson1B. When getting clock, give a chance to the CPUs without DT support, which use Common Clock Framework, such as Loongson1B. Signed-off-by: Kelvin Cheung Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index fd8882f9602a..c136162e6473 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2077,7 +2077,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, goto error_netdev_register; } - priv->stmmac_clk = clk_get(priv->device, NULL); + priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME); if (IS_ERR(priv->stmmac_clk)) { pr_warning("%s: warning: cannot get CSR clock\n", __func__); goto error_clk_get; From 9d7b0fc1ef1f17aff57c0dc9a59453d8fca255c3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 20 Aug 2012 02:56:56 -0700 Subject: [PATCH 0793/1098] net: ipv6: fix oops in inet_putpeer() Commit 97bab73f (inet: Hide route peer accesses behind helpers.) introduced a bug in xfrm6_policy_destroy(). The xfrm_dst's _rt6i_peer member is not initialized, causing a false positive result from inetpeer_ptr_is_peer(), which in turn causes a NULL pointer dereference in inet_putpeer(). Pid: 314, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #17 To Be Filled By O.E.M. To Be Filled By O.E.M./P4S800D-X EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at inet_putpeer+0xe/0x16 EAX: 00000000 EBX: f3481700 ECX: 00000000 EDX: 000dd641 ESI: f3481700 EDI: c05e949c EBP: f551def4 ESP: f551def4 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000070 CR3: 3243d000 CR4: 00000750 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 f551df04 c0423de1 00000000 f3481700 f551df18 c038d5f7 f254b9f8 f551df28 f34f85d8 f551df20 c03ef48d f551df3c c0396870 f30697e8 f24e1738 c05e98f4 f5509540 c05cd2b4 f551df7c c0142d2b c043feb5 f5509540 00000000 c05cd2e8 [] xfrm6_dst_destroy+0x42/0xdb [] dst_destroy+0x1d/0xa4 [] xfrm_bundle_flo_delete+0x2b/0x36 [] flow_cache_gc_task+0x85/0x9f [] process_one_work+0x122/0x441 [] ? apic_timer_interrupt+0x31/0x38 [] ? flow_cache_new_hashrnd+0x2b/0x2b [] worker_thread+0x113/0x3cc Fix by adding a init_dst() callback to struct xfrm_policy_afinfo to properly initialize the dst's peer pointer. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/xfrm.h | 2 ++ net/ipv6/xfrm6_policy.c | 8 ++++++++ net/xfrm/xfrm_policy.c | 2 ++ 3 files changed, 12 insertions(+) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 62b619e82a90..976a81abe1a2 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -292,6 +292,8 @@ struct xfrm_policy_afinfo { struct flowi *fl, int reverse); int (*get_tos)(const struct flowi *fl); + void (*init_dst)(struct net *net, + struct xfrm_dst *dst); int (*init_path)(struct xfrm_dst *path, struct dst_entry *dst, int nfheader_len); diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index ef39812107b1..f8c4c08ffb60 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -73,6 +73,13 @@ static int xfrm6_get_tos(const struct flowi *fl) return 0; } +static void xfrm6_init_dst(struct net *net, struct xfrm_dst *xdst) +{ + struct rt6_info *rt = (struct rt6_info *)xdst; + + rt6_init_peer(rt, net->ipv6.peers); +} + static int xfrm6_init_path(struct xfrm_dst *path, struct dst_entry *dst, int nfheader_len) { @@ -286,6 +293,7 @@ static struct xfrm_policy_afinfo xfrm6_policy_afinfo = { .get_saddr = xfrm6_get_saddr, .decode_session = _decode_session6, .get_tos = xfrm6_get_tos, + .init_dst = xfrm6_init_dst, .init_path = xfrm6_init_path, .fill_dst = xfrm6_fill_dst, .blackhole_route = ip6_blackhole_route, diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index c5a5165a5927..5a2aa17e4d3c 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1357,6 +1357,8 @@ static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family) memset(dst + 1, 0, sizeof(*xdst) - sizeof(*dst)); xdst->flo.ops = &xfrm_bundle_fc_ops; + if (afinfo->init_dst) + afinfo->init_dst(net, xdst); } else xdst = ERR_PTR(-ENOBUFS); From b817bf5c72774556345a9043c6b0c497cdcb7295 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Aug 2012 08:01:21 +0200 Subject: [PATCH 0794/1098] pwm: Improve Kconfig help text The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding Acked-by: Borislav Petkov --- drivers/pwm/Kconfig | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 8fc3808d7a3e..90c5c7357a50 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -1,12 +1,31 @@ menuconfig PWM - bool "PWM Support" + bool "Pulse-Width Modulation (PWM) Support" depends on !MACH_JZ4740 && !PUV3_PWM help - This enables PWM support through the generic PWM framework. - You only need to enable this, if you also want to enable - one or more of the PWM drivers below. + Generic Pulse-Width Modulation (PWM) support. - If unsure, say N. + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. if PWM From 72d3eb13b5c0abe7d63efac41f39c5b644c7bbaa Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Sat, 18 Aug 2012 07:02:20 +0000 Subject: [PATCH 0795/1098] netconsole: remove a redundant netconsole_target_put() This netconsole_target_put() is obviously redundant, and it causes a kernel segfault when removing a bridge device which has netconsole running on it. This is caused by: commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 Author: Amerigo Wang Date: Thu May 19 21:39:10 2011 +0000 netpoll: disable netpoll when enslave a device Cc: David Miller (for all 3.x stable releases) Cc: stable@vger.kernel.org Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index f0ad56c13933..b3321129a83c 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -643,7 +643,6 @@ static int netconsole_netdev_event(struct notifier_block *this, __netpoll_cleanup(&nt->np); dev_put(nt->np.dev); nt->np.dev = NULL; - netconsole_target_put(nt); } nt->enabled = 0; stopped = true; From 3de7a37b02f607716753dc669c1dca4f71db08fc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 14:36:44 +0000 Subject: [PATCH 0796/1098] net/core/dev.c: fix kernel-doc warning Fix kernel-doc warning: Warning(net/core/dev.c:5745): No description found for parameter 'dev' Signed-off-by: Randy Dunlap Cc: "David S. Miller" Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index debd9372472f..83988362805e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -5744,6 +5744,7 @@ EXPORT_SYMBOL(netdev_refcnt_read); /** * netdev_wait_allrefs - wait until all references are gone. + * @dev: target net_device * * This is called when unregistering network devices. * From fae6ef87faeb8853896920c68ee703d715799d28 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sun, 19 Aug 2012 03:30:38 +0000 Subject: [PATCH 0797/1098] net: tcp: move sk_rx_dst_set call after tcp_create_openreq_child() This commit removes the sk_rx_dst_set calls from tcp_create_openreq_child(), because at that point the icsk_af_ops field of ipv6_mapped TCP sockets has not been set to its proper final value. Instead, to make sure we get the right sk_rx_dst_set variant appropriate for the address family of the new connection, we have tcp_v{4,6}_syn_recv_sock() directly call the appropriate function shortly after the call to tcp_create_openreq_child() returns. This also moves inet6_sk_rx_dst_set() to avoid a forward declaration with the new approach. Signed-off-by: Neal Cardwell Reported-by: Artem Savkov Cc: Eric Dumazet Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 1 + net/ipv4/tcp_minisocks.c | 2 -- net/ipv6/tcp_ipv6.c | 25 +++++++++++++------------ 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 767823764016..5bf2040b25b1 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1462,6 +1462,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb, goto exit_nonewsk; newsk->sk_gso_type = SKB_GSO_TCPV4; + inet_sk_rx_dst_set(newsk, skb); newtp = tcp_sk(newsk); newinet = inet_sk(newsk); diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index d9c9dcef2de3..6ff7f10dce9d 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -387,8 +387,6 @@ struct sock *tcp_create_openreq_child(struct sock *sk, struct request_sock *req, struct tcp_sock *oldtp = tcp_sk(sk); struct tcp_cookie_values *oldcvp = oldtp->cookie_values; - newicsk->icsk_af_ops->sk_rx_dst_set(newsk, skb); - /* TCP Cookie Transactions require space for the cookie pair, * as it differs for each connection. There is no need to * copy any s_data_payload stored at the original socket. diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index bb9ce2b2f377..a3e60cc04a8a 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -94,6 +94,18 @@ static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk, } #endif +static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + const struct rt6_info *rt = (const struct rt6_info *)dst; + + dst_hold(dst); + sk->sk_rx_dst = dst; + inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; + if (rt->rt6i_node) + inet6_sk(sk)->rx_dst_cookie = rt->rt6i_node->fn_sernum; +} + static void tcp_v6_hash(struct sock *sk) { if (sk->sk_state != TCP_CLOSE) { @@ -1270,6 +1282,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, newsk->sk_gso_type = SKB_GSO_TCPV6; __ip6_dst_store(newsk, dst, NULL, NULL); + inet6_sk_rx_dst_set(newsk, skb); newtcp6sk = (struct tcp6_sock *)newsk; inet_sk(newsk)->pinet6 = &newtcp6sk->inet6; @@ -1729,18 +1742,6 @@ static struct timewait_sock_ops tcp6_timewait_sock_ops = { .twsk_destructor= tcp_twsk_destructor, }; -static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - const struct rt6_info *rt = (const struct rt6_info *)dst; - - dst_hold(dst); - sk->sk_rx_dst = dst; - inet_sk(sk)->rx_dst_ifindex = skb->skb_iif; - if (rt->rt6i_node) - inet6_sk(sk)->rx_dst_cookie = rt->rt6i_node->fn_sernum; -} - static const struct inet_connection_sock_af_ops ipv6_specific = { .queue_xmit = inet6_csk_xmit, .send_check = tcp_v6_send_check, From 2dba62c30ec3040ef1b647a8976fd7e6854cc7a7 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Sun, 19 Aug 2012 10:16:08 +0000 Subject: [PATCH 0798/1098] netfilter: nfnetlink_log: fix NLA_PUT macro removal bug Commit 1db20a52 (nfnetlink_log: Stop using NLA_PUT*().) incorrectly converted a NLA_PUT_BE16 macro to nla_put_be32() in nfnetlink_log: - NLA_PUT_BE16(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)); + if (nla_put_be32(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) Signed-off-by: Patrick McHardy Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 169ab59ed9d4..592091c1260b 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -480,7 +480,7 @@ __build_packet_message(struct nfulnl_instance *inst, } if (indev && skb_mac_header_was_set(skb)) { - if (nla_put_be32(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) || + if (nla_put_be16(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) || nla_put_be16(inst->skb, NFULA_HWLEN, htons(skb->dev->hard_header_len)) || nla_put(inst->skb, NFULA_HWHEADER, skb->dev->hard_header_len, From 5efcc76c13a745f98e7b6604d6aca49761be1970 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 17 Aug 2012 14:40:04 -0400 Subject: [PATCH 0799/1098] drm/radeon: avoid turning off spread spectrum for used pll If spread spectrum is enabled and in use for a given pll we should not turn it off as it will lead to turning off display for crtc that use the pll (this behavior was observed on chelsea edp). Signed-off-by: Jerome Glisse Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_crtc.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c6fcb5b86a45..cb18813c7df0 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -444,11 +444,28 @@ union atom_enable_ss { static void atombios_crtc_program_ss(struct radeon_device *rdev, int enable, int pll_id, + int crtc_id, struct radeon_atom_ss *ss) { + unsigned i; int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); union atom_enable_ss args; + if (!enable) { + for (i = 0; i < 6; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != crtc_id && + pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off spread spectrum as it might turn off + * display on active crtc + */ + return; + } + } + } + memset(&args, 0, sizeof(args)); if (ASIC_IS_DCE5(rdev)) { @@ -1028,7 +1045,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div); - atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id, encoder_mode, radeon_encoder->encoder_id, mode->clock, @@ -1051,7 +1068,7 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode ss.step = step_size; } - atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, radeon_crtc->pll_id, radeon_crtc->crtc_id, &ss); } } @@ -1572,11 +1589,11 @@ void radeon_atom_disp_eng_pll_init(struct radeon_device *rdev) ASIC_INTERNAL_SS_ON_DCPLL, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_DISABLE, ATOM_DCPLL, -1, &ss); /* XXX: DCE5, make sure voltage, dispclk is high enough */ atombios_crtc_set_disp_eng_pll(rdev, rdev->clock.default_dispclk); if (ss_enabled) - atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, &ss); + atombios_crtc_program_ss(rdev, ATOM_ENABLE, ATOM_DCPLL, -1, &ss); } } From 48c0ac9911839daf188e4a0b6b132ac31050a241 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 20 Aug 2012 15:38:47 +0200 Subject: [PATCH 0800/1098] drm/radeon: init lockup timeout on ring init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reset the lockup timeout on ring (re-)initialisation. Otherwise we get error messages like this on gpu resets: [ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec Signed-off-by: Christian König cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/radeon_ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index ec79b3750430..43c431a2686d 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -706,6 +706,7 @@ int radeon_ring_init(struct radeon_device *rdev, struct radeon_ring *ring, unsig if (radeon_debugfs_ring_init(rdev, ring)) { DRM_ERROR("Failed to register debugfs file for rings !\n"); } + radeon_ring_lockup_update(ring); return 0; } From c116cc94969447f44fd7205a027084ceebe90d34 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sun, 19 Aug 2012 02:22:09 +0200 Subject: [PATCH 0801/1098] drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MSAA is impossible without them. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse --- drivers/gpu/drm/radeon/r600_cs.c | 94 ++++++++++++++++++++++++---- drivers/gpu/drm/radeon/r600d.h | 17 +++++ drivers/gpu/drm/radeon/radeon_drv.c | 3 +- drivers/gpu/drm/radeon/reg_srcs/r600 | 8 --- 4 files changed, 101 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 3dab49cb1d4a..1bec5b8bba18 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -47,13 +47,17 @@ struct r600_cs_track { u32 npipes; /* value we track */ u32 sq_config; + u32 log_nsamples; u32 nsamples; u32 cb_color_base_last[8]; struct radeon_bo *cb_color_bo[8]; u64 cb_color_bo_mc[8]; - u32 cb_color_bo_offset[8]; - struct radeon_bo *cb_color_frag_bo[8]; /* unused */ - struct radeon_bo *cb_color_tile_bo[8]; /* unused */ + u64 cb_color_bo_offset[8]; + struct radeon_bo *cb_color_frag_bo[8]; + u64 cb_color_frag_offset[8]; + struct radeon_bo *cb_color_tile_bo[8]; + u64 cb_color_tile_offset[8]; + u32 cb_color_mask[8]; u32 cb_color_info[8]; u32 cb_color_view[8]; u32 cb_color_size_idx[8]; /* unused */ @@ -349,10 +353,6 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) unsigned array_mode; u32 format; - if (G_0280A0_TILE_MODE(track->cb_color_info[i])) { - dev_warn(p->dev, "FMASK or CMASK buffer are not supported by this kernel\n"); - return -EINVAL; - } size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i]; format = G_0280A0_FORMAT(track->cb_color_info[i]); if (!r600_fmt_is_valid_color(format)) { @@ -441,7 +441,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) * broken userspace. */ } else { - dev_warn(p->dev, "%s offset[%d] %d %d %d %lu too big (%d %d) (%d %d %d)\n", + dev_warn(p->dev, "%s offset[%d] %d %llu %d %lu too big (%d %d) (%d %d %d)\n", __func__, i, array_mode, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]), @@ -458,6 +458,51 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) | S_028060_SLICE_TILE_MAX(slice_tile_max - 1); ib[track->cb_color_size_idx[i]] = tmp; + + /* FMASK/CMASK */ + switch (G_0280A0_TILE_MODE(track->cb_color_info[i])) { + case V_0280A0_TILE_DISABLE: + break; + case V_0280A0_FRAG_ENABLE: + if (track->nsamples > 1) { + uint32_t tile_max = G_028100_FMASK_TILE_MAX(track->cb_color_mask[i]); + /* the tile size is 8x8, but the size is in units of bits. + * for bytes, do just * 8. */ + uint32_t bytes = track->nsamples * track->log_nsamples * 8 * (tile_max + 1); + + if (bytes + track->cb_color_frag_offset[i] > + radeon_bo_size(track->cb_color_frag_bo[i])) { + dev_warn(p->dev, "%s FMASK_TILE_MAX too large " + "(tile_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, tile_max, bytes, + track->cb_color_frag_offset[i], + radeon_bo_size(track->cb_color_frag_bo[i])); + return -EINVAL; + } + } + /* fall through */ + case V_0280A0_CLEAR_ENABLE: + { + uint32_t block_max = G_028100_CMASK_BLOCK_MAX(track->cb_color_mask[i]); + /* One block = 128x128 pixels, one 8x8 tile has 4 bits.. + * (128*128) / (8*8) / 2 = 128 bytes per block. */ + uint32_t bytes = (block_max + 1) * 128; + + if (bytes + track->cb_color_tile_offset[i] > + radeon_bo_size(track->cb_color_tile_bo[i])) { + dev_warn(p->dev, "%s CMASK_BLOCK_MAX too large " + "(block_max=%u, bytes=%u, offset=%llu, bo_size=%lu)\n", + __func__, block_max, bytes, + track->cb_color_tile_offset[i], + radeon_bo_size(track->cb_color_tile_bo[i])); + return -EINVAL; + } + break; + } + default: + dev_warn(p->dev, "%s invalid tile mode\n", __func__); + return -EINVAL; + } return 0; } @@ -1231,6 +1276,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) break; case R_028C04_PA_SC_AA_CONFIG: tmp = G_028C04_MSAA_NUM_SAMPLES(radeon_get_ib_value(p, idx)); + track->log_nsamples = tmp; track->nsamples = 1 << tmp; track->cb_dirty = true; break; @@ -1312,16 +1358,21 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_frag_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_frag_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_frag_bo[tmp] = reloc->robj; + track->cb_color_frag_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case R_0280C0_CB_COLOR0_TILE: @@ -1338,16 +1389,35 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg); return -EINVAL; } - ib[idx] = track->cb_color_base_last[tmp]; track->cb_color_tile_bo[tmp] = track->cb_color_bo[tmp]; + track->cb_color_tile_offset[tmp] = track->cb_color_bo_offset[tmp]; + ib[idx] = track->cb_color_base_last[tmp]; } else { r = r600_cs_packet_next_reloc(p, &reloc); if (r) { dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg); return -EINVAL; } - ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); track->cb_color_tile_bo[tmp] = reloc->robj; + track->cb_color_tile_offset[tmp] = (u64)ib[idx] << 8; + ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + } + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; + } + break; + case R_028100_CB_COLOR0_MASK: + case R_028104_CB_COLOR1_MASK: + case R_028108_CB_COLOR2_MASK: + case R_02810C_CB_COLOR3_MASK: + case R_028110_CB_COLOR4_MASK: + case R_028114_CB_COLOR5_MASK: + case R_028118_CB_COLOR6_MASK: + case R_02811C_CB_COLOR7_MASK: + tmp = (reg - R_028100_CB_COLOR0_MASK) / 4; + track->cb_color_mask[tmp] = ib[idx]; + if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { + track->cb_dirty = true; } break; case CB_COLOR0_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index fd328f4c3ea8..bdb69a63062f 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -92,6 +92,20 @@ #define R_028094_CB_COLOR5_VIEW 0x028094 #define R_028098_CB_COLOR6_VIEW 0x028098 #define R_02809C_CB_COLOR7_VIEW 0x02809C +#define R_028100_CB_COLOR0_MASK 0x028100 +#define S_028100_CMASK_BLOCK_MAX(x) (((x) & 0xFFF) << 0) +#define G_028100_CMASK_BLOCK_MAX(x) (((x) >> 0) & 0xFFF) +#define C_028100_CMASK_BLOCK_MAX 0xFFFFF000 +#define S_028100_FMASK_TILE_MAX(x) (((x) & 0xFFFFF) << 12) +#define G_028100_FMASK_TILE_MAX(x) (((x) >> 12) & 0xFFFFF) +#define C_028100_FMASK_TILE_MAX 0x00000FFF +#define R_028104_CB_COLOR1_MASK 0x028104 +#define R_028108_CB_COLOR2_MASK 0x028108 +#define R_02810C_CB_COLOR3_MASK 0x02810C +#define R_028110_CB_COLOR4_MASK 0x028110 +#define R_028114_CB_COLOR5_MASK 0x028114 +#define R_028118_CB_COLOR6_MASK 0x028118 +#define R_02811C_CB_COLOR7_MASK 0x02811C #define CB_COLOR0_INFO 0x280a0 # define CB_FORMAT(x) ((x) << 2) # define CB_ARRAY_MODE(x) ((x) << 8) @@ -1400,6 +1414,9 @@ #define S_0280A0_TILE_MODE(x) (((x) & 0x3) << 18) #define G_0280A0_TILE_MODE(x) (((x) >> 18) & 0x3) #define C_0280A0_TILE_MODE 0xFFF3FFFF +#define V_0280A0_TILE_DISABLE 0 +#define V_0280A0_CLEAR_ENABLE 1 +#define V_0280A0_FRAG_ENABLE 2 #define S_0280A0_BLEND_CLAMP(x) (((x) & 0x1) << 20) #define G_0280A0_BLEND_CLAMP(x) (((x) >> 20) & 0x1) #define C_0280A0_BLEND_CLAMP 0xFFEFFFFF diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index d7269f48d37c..27d22d709c90 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -62,9 +62,10 @@ * 2.18.0 - r600-eg: allow "invalid" DB formats * 2.19.0 - r600-eg: MSAA textures * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query + * 2.21.0 - r600-r700: FMASK and CMASK */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 20 +#define KMS_DRIVER_MINOR 21 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index 5e659b034d9a..f93e45d869f4 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -744,14 +744,6 @@ r600 0x9400 0x00028C38 CB_CLRCMP_DST 0x00028C3C CB_CLRCMP_MSK 0x00028C34 CB_CLRCMP_SRC -0x00028100 CB_COLOR0_MASK -0x00028104 CB_COLOR1_MASK -0x00028108 CB_COLOR2_MASK -0x0002810C CB_COLOR3_MASK -0x00028110 CB_COLOR4_MASK -0x00028114 CB_COLOR5_MASK -0x00028118 CB_COLOR6_MASK -0x0002811C CB_COLOR7_MASK 0x00028808 CB_COLOR_CONTROL 0x0002842C CB_FOG_BLUE 0x00028428 CB_FOG_GREEN From fcdeefe4df5c0fa457f2dc181ef4e3b2b26de781 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Sun, 19 Aug 2012 21:23:26 +0200 Subject: [PATCH 0802/1098] drm/radeon: fix checking of MSAA renderbuffers on r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MSAA checking was mostly unimplemented on r600-r700. The userspace submits GPU commands and the kernel driver computes how much memory the GPU will access and checks if it's all within buffer bounds the userspace allocated. This patch fixes the computations of the size of MSAA surfaces in memory. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 1bec5b8bba18..ab74e6b149e7 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -420,7 +420,8 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) } /* check offset */ - tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * r600_fmt_get_blocksize(format); + tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * + r600_fmt_get_blocksize(format) * track->nsamples; switch (array_mode) { default: case V_0280A0_ARRAY_LINEAR_GENERAL: @@ -611,7 +612,7 @@ static int r600_cs_track_validate_db(struct radeon_cs_parser *p) ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1; nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1; - tmp = ntiles * bpe * 64 * nviews; + tmp = ntiles * bpe * 64 * nviews * track->nsamples; if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) { dev_warn(p->dev, "z/stencil buffer (%d) too small (0x%08X %d %d %d -> %u have %lu)\n", array_mode, @@ -1562,7 +1563,7 @@ unsigned r600_mip_minify(unsigned size, unsigned level) } static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, - unsigned w0, unsigned h0, unsigned d0, unsigned format, + unsigned w0, unsigned h0, unsigned d0, unsigned nsamples, unsigned format, unsigned block_align, unsigned height_align, unsigned base_align, unsigned *l0_size, unsigned *mipmap_size) { @@ -1590,7 +1591,7 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned llevel, depth = r600_mip_minify(d0, i); - size = nbx * nby * blocksize; + size = nbx * nby * blocksize * nsamples; if (nfaces) size *= nfaces; else @@ -1742,7 +1743,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, nfaces = larray - barray + 1; } - r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, format, + r600_texture_size(nfaces, blevel, llevel, w0, h0, d0, array_check.nsamples, format, pitch_align, height_align, base_align, &l0_size, &mipmap_size); /* using get ib will give us the offset into the texture bo */ From 52e9b39d9a89ae33662596bd30e62dd56bddbe73 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Mon, 20 Aug 2012 15:16:04 +0100 Subject: [PATCH 0803/1098] drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping There is a more recent APU stepping with a new PCI ID shipping in the same board by Fujitsu which needs the same quirk to correctly mark the back plane connectors. Signed-off-by: Tvrtko Ursulin Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_atombios.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index f9c21f9d16bc..d67d4f3eb6f4 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -452,7 +452,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, } /* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */ - if ((dev->pdev->device == 0x9802) && + if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) && (dev->pdev->subsystem_vendor == 0x1734) && (dev->pdev->subsystem_device == 0x11bd)) { if (*connector_type == DRM_MODE_CONNECTOR_VGA) { From 268ba0a99f89a84dc5eb312470896113d0709c74 Mon Sep 17 00:00:00 2001 From: David Lamparter Date: Thu, 16 Aug 2012 15:45:20 -0400 Subject: [PATCH 0804/1098] drm/radeon: implement ACPI VFCT vbios fetch (v3) This is required for pure UEFI systems. The vbios is stored in ACPI rather than at the legacy vga location. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26891 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher Reviewed-by: Jerome Glisse Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_bios.c | 60 ++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 501f4881e5aa..a32232fc7bd3 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -32,6 +32,7 @@ #include #include +#include /* * BIOS. */ @@ -476,6 +477,63 @@ static bool radeon_read_disabled_bios(struct radeon_device *rdev) return legacy_read_disabled_bios(rdev); } +#ifdef CONFIG_ACPI +static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + bool ret = false; + struct acpi_table_header *hdr; + /* acpi_get_table_with_size is not exported :( */ + acpi_size tbl_size = 0x7fffffff; + UEFI_ACPI_VFCT *vfct; + GOP_VBIOS_CONTENT *vbios; + VFCT_IMAGE_HEADER *vhdr; + + if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr))) + return false; + if (tbl_size < sizeof(UEFI_ACPI_VFCT)) { + DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n"); + goto out_unmap; + } + + vfct = (UEFI_ACPI_VFCT *)hdr; + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) > tbl_size) { + DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n"); + goto out_unmap; + } + + vbios = (GOP_VBIOS_CONTENT *)((char *)hdr + vfct->VBIOSImageOffset); + vhdr = &vbios->VbiosHeader; + DRM_INFO("ACPI VFCT contains a BIOS for %02x:%02x.%d %04x:%04x, size %d\n", + vhdr->PCIBus, vhdr->PCIDevice, vhdr->PCIFunction, + vhdr->VendorID, vhdr->DeviceID, vhdr->ImageLength); + + if (vhdr->PCIBus != rdev->pdev->bus->number || + vhdr->PCIDevice != PCI_SLOT(rdev->pdev->devfn) || + vhdr->PCIFunction != PCI_FUNC(rdev->pdev->devfn) || + vhdr->VendorID != rdev->pdev->vendor || + vhdr->DeviceID != rdev->pdev->device) { + DRM_INFO("ACPI VFCT table is not for this card\n"); + goto out_unmap; + }; + + if (vfct->VBIOSImageOffset + sizeof(VFCT_IMAGE_HEADER) + vhdr->ImageLength > tbl_size) { + DRM_ERROR("ACPI VFCT image truncated\n"); + goto out_unmap; + } + + rdev->bios = kmemdup(&vbios->VbiosContent, vhdr->ImageLength, GFP_KERNEL); + ret = !!rdev->bios; + +out_unmap: + /* uh, no idea what to do here... */ + return ret; +} +#else +static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev) +{ + return false; +} +#endif bool radeon_get_bios(struct radeon_device *rdev) { @@ -483,6 +541,8 @@ bool radeon_get_bios(struct radeon_device *rdev) uint16_t tmp; r = radeon_atrm_get_bios(rdev); + if (r == false) + r = radeon_acpi_vfct_bios(rdev); if (r == false) r = igp_read_bios_from_vram(rdev); if (r == false) From 4f81f986761a7663db7d24d24cd6ae68008f1fc2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 20 Aug 2012 10:57:22 -0400 Subject: [PATCH 0805/1098] ACPI: export symbol acpi_get_table_with_size We need it in the radeon drm module to fetch and verify the vbios image on UEFI systems. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/acpi/acpica/tbxface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index ea4c6d52605a..29e51bc01383 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -387,6 +387,7 @@ acpi_get_table_with_size(char *signature, return (AE_NOT_FOUND); } +ACPI_EXPORT_SYMBOL(acpi_get_table_with_size) acpi_status acpi_get_table(char *signature, From 7c3906d04a4587dceaa78cc1ae6b14e6454ee02a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 20 Aug 2012 11:06:21 -0400 Subject: [PATCH 0806/1098] drm/radeon: convert radeon vfct code to use acpi_get_table_with_size Allows us to verify the table size. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_bios.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index a32232fc7bd3..ab0b2f7292ae 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -482,13 +482,12 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) { bool ret = false; struct acpi_table_header *hdr; - /* acpi_get_table_with_size is not exported :( */ - acpi_size tbl_size = 0x7fffffff; + acpi_size tbl_size; UEFI_ACPI_VFCT *vfct; GOP_VBIOS_CONTENT *vbios; VFCT_IMAGE_HEADER *vhdr; - if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr))) + if (!ACPI_SUCCESS(acpi_get_table_with_size("VFCT", 1, &hdr, &tbl_size))) return false; if (tbl_size < sizeof(UEFI_ACPI_VFCT)) { DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n"); @@ -525,7 +524,6 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev) ret = !!rdev->bios; out_unmap: - /* uh, no idea what to do here... */ return ret; } #else From c61e2775873f603148e8e998a938721b7d222d24 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 16 Aug 2012 15:39:09 -0400 Subject: [PATCH 0807/1098] drm/radeon: split ATRM support out from the ATPX handler (v3) There are systems that use ATRM, but not ATPX. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41265 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon.h | 15 ---- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 56 +------------- drivers/gpu/drm/radeon/radeon_bios.c | 80 +++++++++++++++++++- 3 files changed, 77 insertions(+), 74 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 99304194a65c..59a15315ae9f 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -142,21 +142,6 @@ struct radeon_device; /* * BIOS. */ -#define ATRM_BIOS_PAGE 4096 - -#if defined(CONFIG_VGA_SWITCHEROO) -bool radeon_atrm_supported(struct pci_dev *pdev); -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len); -#else -static inline bool radeon_atrm_supported(struct pci_dev *pdev) -{ - return false; -} - -static inline int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len){ - return -EINVAL; -} -#endif bool radeon_get_bios(struct radeon_device *rdev); /* diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 98724fcb0088..2a2cf0b88a28 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -30,57 +30,8 @@ static struct radeon_atpx_priv { /* handle for device - and atpx */ acpi_handle dhandle; acpi_handle atpx_handle; - acpi_handle atrm_handle; } radeon_atpx_priv; -/* retrieve the ROM in 4k blocks */ -static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, - int offset, int len) -{ - acpi_status status; - union acpi_object atrm_arg_elements[2], *obj; - struct acpi_object_list atrm_arg; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; - - atrm_arg.count = 2; - atrm_arg.pointer = &atrm_arg_elements[0]; - - atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[0].integer.value = offset; - - atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; - atrm_arg_elements[1].integer.value = len; - - status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); - if (ACPI_FAILURE(status)) { - printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); - return -ENODEV; - } - - obj = (union acpi_object *)buffer.pointer; - memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); - len = obj->buffer.length; - kfree(buffer.pointer); - return len; -} - -bool radeon_atrm_supported(struct pci_dev *pdev) -{ - /* get the discrete ROM only via ATRM */ - if (!radeon_atpx_priv.atpx_detected) - return false; - - if (radeon_atpx_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev)) - return false; - return true; -} - - -int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len) -{ - return radeon_atrm_call(radeon_atpx_priv.atrm_handle, bios, offset, len); -} - static int radeon_atpx_get_version(acpi_handle handle) { acpi_status status; @@ -198,7 +149,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) { - acpi_handle dhandle, atpx_handle, atrm_handle; + acpi_handle dhandle, atpx_handle; acpi_status status; dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); @@ -209,13 +160,8 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) if (ACPI_FAILURE(status)) return false; - status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); - if (ACPI_FAILURE(status)) - return false; - radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx_handle = atpx_handle; - radeon_atpx_priv.atrm_handle = atrm_handle; return true; } diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index ab0b2f7292ae..d306cc8fdeaa 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -99,16 +99,81 @@ static bool radeon_read_bios(struct radeon_device *rdev) return true; } +#ifdef CONFIG_ACPI /* ATRM is used to get the BIOS on the discrete cards in * dual-gpu systems. */ +/* retrieve the ROM in 4k blocks */ +#define ATRM_BIOS_PAGE 4096 +/** + * radeon_atrm_call - fetch a chunk of the vbios + * + * @atrm_handle: acpi ATRM handle + * @bios: vbios image pointer + * @offset: offset of vbios image data to fetch + * @len: length of vbios image data to fetch + * + * Executes ATRM to fetch a chunk of the discrete + * vbios image on PX systems (all asics). + * Returns the length of the buffer fetched. + */ +static int radeon_atrm_call(acpi_handle atrm_handle, uint8_t *bios, + int offset, int len) +{ + acpi_status status; + union acpi_object atrm_arg_elements[2], *obj; + struct acpi_object_list atrm_arg; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL}; + + atrm_arg.count = 2; + atrm_arg.pointer = &atrm_arg_elements[0]; + + atrm_arg_elements[0].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[0].integer.value = offset; + + atrm_arg_elements[1].type = ACPI_TYPE_INTEGER; + atrm_arg_elements[1].integer.value = len; + + status = acpi_evaluate_object(atrm_handle, NULL, &atrm_arg, &buffer); + if (ACPI_FAILURE(status)) { + printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status)); + return -ENODEV; + } + + obj = (union acpi_object *)buffer.pointer; + memcpy(bios+offset, obj->buffer.pointer, obj->buffer.length); + len = obj->buffer.length; + kfree(buffer.pointer); + return len; +} + static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; int size = 256 * 1024; int i; + struct pci_dev *pdev = NULL; + acpi_handle dhandle, atrm_handle; + acpi_status status; + bool found = false; - if (!radeon_atrm_supported(rdev->pdev)) + /* ATRM is for the discrete card only */ + if (rdev->flags & RADEON_IS_IGP) + return false; + + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) { + dhandle = DEVICE_ACPI_HANDLE(&pdev->dev); + if (!dhandle) + continue; + + status = acpi_get_handle(dhandle, "ATRM", &atrm_handle); + if (!ACPI_FAILURE(status)) { + found = true; + break; + } + } + + if (!found) return false; rdev->bios = kmalloc(size, GFP_KERNEL); @@ -118,9 +183,10 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } for (i = 0; i < size / ATRM_BIOS_PAGE; i++) { - ret = radeon_atrm_get_bios_chunk(rdev->bios, - (i * ATRM_BIOS_PAGE), - ATRM_BIOS_PAGE); + ret = radeon_atrm_call(atrm_handle, + rdev->bios, + (i * ATRM_BIOS_PAGE), + ATRM_BIOS_PAGE); if (ret < ATRM_BIOS_PAGE) break; } @@ -131,6 +197,12 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev) } return true; } +#else +static inline bool radeon_atrm_get_bios(struct radeon_device *rdev) +{ + return false; +} +#endif static bool ni_read_disabled_bios(struct radeon_device *rdev) { From 7653f6ff4ebab2a094e65b60fb19ee66ed2f78e7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 20 Aug 2012 12:12:29 -0400 Subject: [PATCH 0808/1098] NFSv4: Ensure that nfs4_alloc_client cleans up on error. Any pointer that was allocated through nfs_alloc_client() needs to be freed via a call to nfs_free_client(). Reported-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index cbcdfaf32505..24eb663f8ed5 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -74,7 +74,7 @@ struct nfs_client *nfs4_alloc_client(const struct nfs_client_initdata *cl_init) return clp; error: - kfree(clp); + nfs_free_client(clp); return ERR_PTR(err); } From 296f9fe05d916e3d791dcd166aa41c1dadca4735 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:07:50 +0800 Subject: [PATCH 0809/1098] ideapad: add Lenovo IdeaPad Z570 support (part 1) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 1 for special button handling. Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/ideapad-laptop.c | 32 +++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 17f6dfd8dbfb..2396242e8418 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -65,6 +65,7 @@ enum { VPCCMD_R_ODD, /* 0x21 */ VPCCMD_R_RF = 0x23, VPCCMD_W_RF, + VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -518,9 +519,13 @@ static void ideapad_platform_exit(struct ideapad_private *priv) */ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 6, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 7, { KEY_CAMERA } }, + { KE_KEY, 11, { KEY_F16 } }, { KE_KEY, 13, { KEY_WLAN } }, { KE_KEY, 16, { KEY_PROG1 } }, { KE_KEY, 17, { KEY_PROG2 } }, + { KE_KEY, 64, { KEY_PROG3 } }, + { KE_KEY, 65, { KEY_PROG4 } }, { KE_END, 0 }, }; @@ -587,6 +592,28 @@ static void ideapad_input_novokey(struct ideapad_private *priv) ideapad_input_report(priv, 16); } +static void ideapad_check_special_buttons(struct ideapad_private *priv) +{ + unsigned long bit, value; + + read_ec_data(ideapad_handle, VPCCMD_R_SPECIAL_BUTTONS, &value); + + for (bit = 0; bit < 16; bit++) { + if (test_bit(bit, &value)) { + switch (bit) { + case 6: + /* Thermal Management button */ + ideapad_input_report(priv, 65); + break; + case 1: + /* OneKey Theater button */ + ideapad_input_report(priv, 64); + break; + } + } + } +} + /* * backlight */ @@ -785,6 +812,8 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) ideapad_sync_rfk_state(priv); break; case 13: + case 11: + case 7: case 6: ideapad_input_report(priv, vpc_bit); break; @@ -797,6 +826,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 2: ideapad_backlight_notify_power(priv); break; + case 0: + ideapad_check_special_buttons(priv); + break; default: pr_info("Unknown event: %lu\n", vpc_bit); } From 07a4a4fc83dd95bc7eb842cf9510ddcb45691a88 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:00 +0800 Subject: [PATCH 0810/1098] ideapad: add Lenovo IdeaPad Z570 support (part 2) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is part 2 for touchpad toggle Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/ideapad-laptop.c | 35 +++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 637074d89790..c86bae828c28 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -289,6 +289,7 @@ config IDEAPAD_LAPTOP tristate "Lenovo IdeaPad Laptop Extras" depends on ACPI depends on RFKILL && INPUT + depends on SERIO_I8042 select INPUT_SPARSEKMAP help This is a driver for the rfkill switches on Lenovo IdeaPad netbooks. diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 2396242e8418..7bc1b6c60e56 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -36,6 +36,7 @@ #include #include #include +#include #define IDEAPAD_RFKILL_DEV_NUM (3) @@ -526,6 +527,8 @@ static const struct key_entry ideapad_keymap[] = { { KE_KEY, 17, { KEY_PROG2 } }, { KE_KEY, 64, { KEY_PROG3 } }, { KE_KEY, 65, { KEY_PROG4 } }, + { KE_KEY, 66, { KEY_TOUCHPAD_OFF } }, + { KE_KEY, 67, { KEY_TOUCHPAD_ON } }, { KE_END, 0 }, }; @@ -718,6 +721,24 @@ static const struct acpi_device_id ideapad_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, ideapad_device_ids); +static void ideapad_sync_touchpad_state(struct acpi_device *adevice) +{ + struct ideapad_private *priv = dev_get_drvdata(&adevice->dev); + unsigned long value; + + /* Without reading from EC touchpad LED doesn't switch state */ + if (!read_ec_data(adevice->handle, VPCCMD_R_TOUCHPAD, &value)) { + /* Some IdeaPads don't really turn off touchpad - they only + * switch the LED state. We (de)activate KBC AUX port to turn + * touchpad off and on. We send KEY_TOUCHPAD_OFF and + * KEY_TOUCHPAD_ON to not to get out of sync with LED */ + unsigned char param; + i8042_command(¶m, value ? I8042_CMD_AUX_ENABLE : + I8042_CMD_AUX_DISABLE); + ideapad_input_report(priv, value ? 67 : 66); + } +} + static int __devinit ideapad_acpi_add(struct acpi_device *adevice) { int ret, i; @@ -754,6 +775,7 @@ static int __devinit ideapad_acpi_add(struct acpi_device *adevice) priv->rfk[i] = NULL; } ideapad_sync_rfk_state(priv); + ideapad_sync_touchpad_state(adevice); if (!acpi_video_backlight_support()) { ret = ideapad_backlight_init(priv); @@ -817,6 +839,9 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) case 6: ideapad_input_report(priv, vpc_bit); break; + case 5: + ideapad_sync_touchpad_state(adevice); + break; case 4: ideapad_backlight_notify_brightness(priv); break; @@ -836,6 +861,15 @@ static void ideapad_acpi_notify(struct acpi_device *adevice, u32 event) } } +static int ideapad_acpi_resume(struct device *device) +{ + ideapad_sync_rfk_state(ideapad_priv); + ideapad_sync_touchpad_state(to_acpi_device(device)); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume); + static struct acpi_driver ideapad_acpi_driver = { .name = "ideapad_acpi", .class = "IdeaPad", @@ -843,6 +877,7 @@ static struct acpi_driver ideapad_acpi_driver = { .ops.add = ideapad_acpi_add, .ops.remove = ideapad_acpi_remove, .ops.notify = ideapad_acpi_notify, + .drv.pm = &ideapad_pm, .owner = THIS_MODULE, }; From 0c7bbeb9f1373cea9e8efb43221118be2102a01c Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy Date: Fri, 6 Jul 2012 16:08:11 +0800 Subject: [PATCH 0811/1098] ideapad: add Lenovo IdeaPad Z570 support (part 3) The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special keys working, adds possibility to control fan like Windows does, controls Touchpad Disabled LED, toggles touchpad state via keyboard controller and corrects touchpad behavior on resume from suspend. It is new, modified version of patch. Now it does not depend on psmouse and does not need patching of input subsystem. Signed-off-by: Maxim Mikityanskiy This is the part 3 for fan control Signed-off-by: Ike Panhc Signed-off-by: Matthew Garrett --- .../ABI/testing/sysfs-platform-ideapad-laptop | 11 +++++ drivers/platform/x86/ideapad-laptop.c | 43 +++++++++++++++++-- 2 files changed, 51 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 814b01354c41..b31e782bd985 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -5,4 +5,15 @@ Contact: "Ike Panhc " Description: Control the power of camera module. 1 means on, 0 means off. +What: /sys/devices/platform/ideapad/fan_mode +Date: June 2012 +KernelVersion: 3.6 +Contact: "Maxim Mikityanskiy " +Description: + Change fan mode + There are four available modes: + * 0 -> Super Silent Mode + * 1 -> Standard Mode + * 2 -> Dust Cleaning + * 4 -> Efficient Thermal Dissipation Mode diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 7bc1b6c60e56..dae7abe1d711 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -64,8 +64,10 @@ enum { VPCCMD_R_3G, VPCCMD_W_3G, VPCCMD_R_ODD, /* 0x21 */ - VPCCMD_R_RF = 0x23, + VPCCMD_W_FAN, + VPCCMD_R_RF, VPCCMD_W_RF, + VPCCMD_R_FAN = 0x2B, VPCCMD_R_SPECIAL_BUTTONS = 0x31, VPCCMD_W_BL_POWER = 0x33, }; @@ -358,14 +360,46 @@ static ssize_t store_ideapad_cam(struct device *dev, return -EINVAL; ret = write_ec_cmd(ideapad_handle, VPCCMD_W_CAMERA, state); if (ret < 0) - return ret; + return -EIO; return count; } static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam); +static ssize_t show_ideapad_fan(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + unsigned long result; + + if (read_ec_data(ideapad_handle, VPCCMD_R_FAN, &result)) + return sprintf(buf, "-1\n"); + return sprintf(buf, "%lu\n", result); +} + +static ssize_t store_ideapad_fan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret, state; + + if (!count) + return 0; + if (sscanf(buf, "%i", &state) != 1) + return -EINVAL; + if (state < 0 || state > 4 || state == 3) + return -EINVAL; + ret = write_ec_cmd(ideapad_handle, VPCCMD_W_FAN, state); + if (ret < 0) + return -EIO; + return count; +} + +static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan); + static struct attribute *ideapad_attributes[] = { &dev_attr_camera_power.attr, + &dev_attr_fan_mode.attr, NULL }; @@ -379,7 +413,10 @@ static umode_t ideapad_is_visible(struct kobject *kobj, if (attr == &dev_attr_camera_power.attr) supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg)); - else + else if (attr == &dev_attr_fan_mode.attr) { + unsigned long value; + supported = !read_ec_data(ideapad_handle, VPCCMD_R_FAN, &value); + } else supported = true; return supported ? attr->mode : 0; From 086600430493e04b802bee6e5b3ce0458e4eb77f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 20 Aug 2012 12:42:15 -0400 Subject: [PATCH 0812/1098] NFSv3: Ensure that do_proc_get_root() reports errors correctly If the rpc call to NFS3PROC_FSINFO fails, then we need to report that error so that the mount fails. Otherwise we can end up with a superblock with completely unusable values for block sizes, maxfilesize, etc. Reported-by: Yuanming Chen Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs3proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 0952c791df36..d6b3b5f2d779 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -69,7 +69,7 @@ do_proc_get_root(struct rpc_clnt *client, struct nfs_fh *fhandle, nfs_fattr_init(info->fattr); status = rpc_call_sync(client, &msg, 0); dprintk("%s: reply fsinfo: %d\n", __func__, status); - if (!(info->fattr->valid & NFS_ATTR_FATTR)) { + if (status == 0 && !(info->fattr->valid & NFS_ATTR_FATTR)) { msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR]; msg.rpc_resp = info->fattr; status = rpc_call_sync(client, &msg, 0); From d1c338a509cea5378df59629ad47382810c38623 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sun, 19 Aug 2012 12:29:16 -0700 Subject: [PATCH 0813/1098] libceph: delay debugfs initialization until we learn global_id The debugfs directory includes the cluster fsid and our unique global_id. We need to delay the initialization of the debug entry until we have learned both the fsid and our global_id from the monitor or else the second client can't create its debugfs entry and will fail (and multiple client instances aren't properly reflected in debugfs). Reported by: Yan, Zheng Signed-off-by: Sage Weil Reviewed-by: Yehuda Sadeh --- fs/ceph/debugfs.c | 1 + net/ceph/ceph_common.c | 1 - net/ceph/debugfs.c | 4 ++++ net/ceph/mon_client.c | 51 +++++++++++++++++++++++++++++++++++++----- 4 files changed, 51 insertions(+), 6 deletions(-) diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c index fb962efdacee..6d59006bfa27 100644 --- a/fs/ceph/debugfs.c +++ b/fs/ceph/debugfs.c @@ -201,6 +201,7 @@ int ceph_fs_debugfs_init(struct ceph_fs_client *fsc) int err = -ENOMEM; dout("ceph_fs_debugfs_init\n"); + BUG_ON(!fsc->client->debugfs_dir); fsc->debugfs_congestion_kb = debugfs_create_file("writeback_congestion_kb", 0600, diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c index 69e38db28e5f..a8020293f342 100644 --- a/net/ceph/ceph_common.c +++ b/net/ceph/ceph_common.c @@ -84,7 +84,6 @@ int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid) return -1; } } else { - pr_info("client%lld fsid %pU\n", ceph_client_id(client), fsid); memcpy(&client->fsid, fsid, sizeof(*fsid)); } return 0; diff --git a/net/ceph/debugfs.c b/net/ceph/debugfs.c index 54b531a01121..38b5dc1823d4 100644 --- a/net/ceph/debugfs.c +++ b/net/ceph/debugfs.c @@ -189,6 +189,9 @@ int ceph_debugfs_client_init(struct ceph_client *client) snprintf(name, sizeof(name), "%pU.client%lld", &client->fsid, client->monc.auth->global_id); + dout("ceph_debugfs_client_init %p %s\n", client, name); + + BUG_ON(client->debugfs_dir); client->debugfs_dir = debugfs_create_dir(name, ceph_debugfs_dir); if (!client->debugfs_dir) goto out; @@ -234,6 +237,7 @@ out: void ceph_debugfs_client_cleanup(struct ceph_client *client) { + dout("ceph_debugfs_client_cleanup %p\n", client); debugfs_remove(client->debugfs_osdmap); debugfs_remove(client->debugfs_monmap); debugfs_remove(client->osdc.debugfs_file); diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c index 105d533b55f3..900ea0f043fc 100644 --- a/net/ceph/mon_client.c +++ b/net/ceph/mon_client.c @@ -310,6 +310,17 @@ int ceph_monc_open_session(struct ceph_mon_client *monc) } EXPORT_SYMBOL(ceph_monc_open_session); +/* + * We require the fsid and global_id in order to initialize our + * debugfs dir. + */ +static bool have_debugfs_info(struct ceph_mon_client *monc) +{ + dout("have_debugfs_info fsid %d globalid %lld\n", + (int)monc->client->have_fsid, monc->auth->global_id); + return monc->client->have_fsid && monc->auth->global_id > 0; +} + /* * The monitor responds with mount ack indicate mount success. The * included client ticket allows the client to talk to MDSs and OSDs. @@ -320,9 +331,12 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc, struct ceph_client *client = monc->client; struct ceph_monmap *monmap = NULL, *old = monc->monmap; void *p, *end; + int had_debugfs_info, init_debugfs = 0; mutex_lock(&monc->mutex); + had_debugfs_info = have_debugfs_info(monc); + dout("handle_monmap\n"); p = msg->front.iov_base; end = p + msg->front.iov_len; @@ -344,12 +358,22 @@ static void ceph_monc_handle_map(struct ceph_mon_client *monc, if (!client->have_fsid) { client->have_fsid = true; + if (!had_debugfs_info && have_debugfs_info(monc)) { + pr_info("client%lld fsid %pU\n", + ceph_client_id(monc->client), + &monc->client->fsid); + init_debugfs = 1; + } mutex_unlock(&monc->mutex); - /* - * do debugfs initialization without mutex to avoid - * creating a locking dependency - */ - ceph_debugfs_client_init(client); + + if (init_debugfs) { + /* + * do debugfs initialization without mutex to avoid + * creating a locking dependency + */ + ceph_debugfs_client_init(monc->client); + } + goto out_unlocked; } out: @@ -865,8 +889,10 @@ static void handle_auth_reply(struct ceph_mon_client *monc, { int ret; int was_auth = 0; + int had_debugfs_info, init_debugfs = 0; mutex_lock(&monc->mutex); + had_debugfs_info = have_debugfs_info(monc); if (monc->auth->ops) was_auth = monc->auth->ops->is_authenticated(monc->auth); monc->pending_auth = 0; @@ -889,7 +915,22 @@ static void handle_auth_reply(struct ceph_mon_client *monc, __send_subscribe(monc); __resend_generic_request(monc); } + + if (!had_debugfs_info && have_debugfs_info(monc)) { + pr_info("client%lld fsid %pU\n", + ceph_client_id(monc->client), + &monc->client->fsid); + init_debugfs = 1; + } mutex_unlock(&monc->mutex); + + if (init_debugfs) { + /* + * do debugfs initialization without mutex to avoid + * creating a locking dependency + */ + ceph_debugfs_client_init(monc->client); + } } static int __validate_auth(struct ceph_mon_client *monc) From 0e665d5d1125f9f4ccff56a75e814f10f88861a2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Aug 2012 15:28:00 +0100 Subject: [PATCH 0814/1098] vfs: missed source of ->f_pos races compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing as sys_{read,write}{,v}(). Signed-off-by: Al Viro Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/compat.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/compat.c b/fs/compat.c index 6161255fac45..1bdb350ea5d3 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1155,11 +1155,14 @@ compat_sys_readv(unsigned long fd, const struct compat_iovec __user *vec, struct file *file; int fput_needed; ssize_t ret; + loff_t pos; file = fget_light(fd, &fput_needed); if (!file) return -EBADF; - ret = compat_readv(file, vec, vlen, &file->f_pos); + pos = file->f_pos; + ret = compat_readv(file, vec, vlen, &pos); + file->f_pos = pos; fput_light(file, fput_needed); return ret; } @@ -1221,11 +1224,14 @@ compat_sys_writev(unsigned long fd, const struct compat_iovec __user *vec, struct file *file; int fput_needed; ssize_t ret; + loff_t pos; file = fget_light(fd, &fput_needed); if (!file) return -EBADF; - ret = compat_writev(file, vec, vlen, &file->f_pos); + pos = file->f_pos; + ret = compat_writev(file, vec, vlen, &pos); + file->f_pos = pos; fput_light(file, fput_needed); return ret; } From 1ee9ae3244c4789f3184c5123f3b2d7e405b3f4c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 15 Aug 2012 10:41:45 +0200 Subject: [PATCH 0815/1098] drm/i915: use hsw rps tuning values everywhere on gen6+ James Bottomley reported [1] a massive power regression, due to the enabling of semaphores by default in 3.5. A workaround for him is to again disable semaphores. And indeed, his system has a very hard time to enter rc6 with semaphores enabled. Ben Widawsky run around with a kill-a-watt a lot and noticed: - There are indeed a few rare systems that seem to have a hard time entering rc6 when desktop-idle. - One machine, The Indestructible Toshiba regressed in this behaviour between 3.5 and 3.6 in a merge commit! So rc6 behaviour with the current setting seems to be highly timing dependent and not robust at all. - The behaviour James reported wrt semaphores seems to be a freak timing thing that only happens on his specific machine, confirming that enabling semaphores shouldn't reduce rc6 residency. Now furthermore the Google ChromeOS guys reported [2] a while ago that at least on some machines a simply a blinking cursor can keep the gpu turbo at the highest frequency. This is because the current rps limits used on snb/ivb are highly asymmetric. On the theory that gpu turbo and rc6 tuning values are related, we've tried whether the much saner looking (since much less asymmetric) rps tuning values used for hsw would also help entering rc6 more robustly. And it seems to mostly work, and we don't really have the resources to through-roughly tune things in any better way: The values from the ChromeOS ppl seem to fare a bit worse for James' machine, so I guess we better stick with something vpg (the gpu hw/windows group) provided, hoping that they've done their jobs. Reference[1]: http://lists.freedesktop.org/archives/dri-devel/2012-July/025675.html Reference[2]: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018692.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53393 Tested-by: Ben Widawsky Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 58c07cdafb7e..1881c8c83f0e 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2441,17 +2441,10 @@ static void gen6_enable_rps(struct drm_device *dev) dev_priv->max_delay << 24 | dev_priv->min_delay << 16); - if (IS_HASWELL(dev)) { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); - I915_WRITE(GEN6_RP_UP_EI, 66000); - I915_WRITE(GEN6_RP_DOWN_EI, 350000); - } else { - I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); - I915_WRITE(GEN6_RP_UP_EI, 100000); - I915_WRITE(GEN6_RP_DOWN_EI, 5000000); - } + I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000); + I915_WRITE(GEN6_RP_UP_EI, 66000); + I915_WRITE(GEN6_RP_DOWN_EI, 350000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, From 8f057d7bca549e8f7c1f8e750c75598986f5d9aa Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 20 Aug 2012 11:23:16 -0700 Subject: [PATCH 0816/1098] gpu/mfd/usb: Fix USB randconfig problems Fix config warning: warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD) and build error: ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined! by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C drivers/i2c/Kconfig:5: symbol I2C is selected by FB_DDC drivers/video/Kconfig:86: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/Kconfig:385: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/Kconfig:373: symbol FB_CYBER2000 depends on FB which is due to drivers/usb/Kconfig: config USB_ARCH_HAS_OHCI ... default y if ARCH_PNX4008 && I2C Fix by dropping I2C from the above dependency; logic is that this is not a platform dependency but a configuration dependency: the _architecture_ still supports USB even is I2C is not selected. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB drivers/mfd/Kconfig:396: symbol MFD_TC6393XB depends on GPIOLIB drivers/gpio/Kconfig:35: symbol GPIOLIB is selected by FB_VIA drivers/video/Kconfig:1560: symbol FB_VIA depends on FB which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on it. Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/Kconfig | 1 + drivers/gpu/drm/udl/Kconfig | 1 + drivers/mfd/Kconfig | 3 ++- drivers/usb/Kconfig | 2 +- 4 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 23120c00a881..90e28081712d 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -22,6 +22,7 @@ menuconfig DRM config DRM_USB tristate depends on DRM + depends on USB_ARCH_HAS_HCD select USB config DRM_KMS_HELPER diff --git a/drivers/gpu/drm/udl/Kconfig b/drivers/gpu/drm/udl/Kconfig index 0b5e096d39a6..56e0bf31d425 100644 --- a/drivers/gpu/drm/udl/Kconfig +++ b/drivers/gpu/drm/udl/Kconfig @@ -1,6 +1,7 @@ config DRM_UDL tristate "DisplayLink" depends on DRM && EXPERIMENTAL + depends on USB_ARCH_HAS_HCD select DRM_USB select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d1facef28a60..b1a146205c08 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -395,7 +395,8 @@ config MFD_TC6387XB config MFD_TC6393XB bool "Support Toshiba TC6393XB" - depends on GPIOLIB && ARM && HAVE_CLK + depends on ARM && HAVE_CLK + select GPIOLIB select MFD_CORE select MFD_TMIO help diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index a7773a3e02b1..7065df6036ca 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -13,7 +13,7 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 && I2C + default y if ARCH_PNX4008 default y if MFD_TC6393XB default y if ARCH_W90X900 default y if ARCH_DAVINCI_DA8XX From 535b6c51fe8293c88ce919cdfc4390c67a1cb6d1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Aug 2012 21:25:22 +0200 Subject: [PATCH 0817/1098] ALSA: hda - Fix leftover codec->power_transition When the codec turn-on operation is canceled by the immediate power-on, the driver left the power_transition flag as is. This caused the persistent avoidance of power-save behavior. Cc: [v3.5+] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c3077d5dec6e..f560051a949e 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4454,6 +4454,8 @@ static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down) * then there is no need to go through power up here. */ if (codec->power_on) { + if (codec->power_transition < 0) + codec->power_transition = 0; spin_unlock(&codec->power_lock); return; } From 7c3ea4859ae132d61594320e148b0348f03c0edc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 18 Aug 2012 13:23:49 -0300 Subject: [PATCH 0818/1098] [IA64] defconfig: Remove CONFIG_MISC_DEVICES commit 7c5763b845 (drivers:misc: Remove MISC_DEVICES config option) removed CONFIG_MISC_DEVICES option, so remove the occurrences from the config files as well. Signed-off-by: Fabio Estevam Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e2e837..7913695b2fcb 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ecfa6d9..f8e913365423 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y From 6de7145ca3db231a84b7516a6cb25878da6ebb19 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 18 Aug 2012 15:44:09 -0700 Subject: [PATCH 0819/1098] tcm_vhost: Fix vhost_scsi_target structure alignment Here TRANSPORT_IQN_LEN is 224, which is a multiple of 4. Since vhost_tpgt is 2 bytes and abi_version is 4, the total size would be 230. But gcc needs struct size be aligned to first field size, which is 4 bytes, so it pads the structure by extra 2 bytes to the total of 232. This padding is very undesirable in an ABI: - it can not be initialized easily - it can not be checked easily - it can leak information between kernel and userspace Simplest solution is probably just to make the padding explicit. (v2: Add check for zero'ed backend->reserved field for VHOST_SCSI_SET_ENDPOINT and VHOST_SCSI_CLEAR_ENDPOINT ops as requested by MST) Reported-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin Signed-off-by: Nicholas Bellinger --- drivers/vhost/tcm_vhost.c | 4 ++++ drivers/vhost/tcm_vhost.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c index 74b2edaaf1f6..ed8e2e6c8df2 100644 --- a/drivers/vhost/tcm_vhost.c +++ b/drivers/vhost/tcm_vhost.c @@ -995,11 +995,15 @@ static long vhost_scsi_ioctl(struct file *f, unsigned int ioctl, case VHOST_SCSI_SET_ENDPOINT: if (copy_from_user(&backend, argp, sizeof backend)) return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; return vhost_scsi_set_endpoint(vs, &backend); case VHOST_SCSI_CLEAR_ENDPOINT: if (copy_from_user(&backend, argp, sizeof backend)) return -EFAULT; + if (backend.reserved != 0) + return -EOPNOTSUPP; return vhost_scsi_clear_endpoint(vs, &backend); case VHOST_SCSI_GET_ABI_VERSION: diff --git a/drivers/vhost/tcm_vhost.h b/drivers/vhost/tcm_vhost.h index e9d5c020fb39..d9e93557d669 100644 --- a/drivers/vhost/tcm_vhost.h +++ b/drivers/vhost/tcm_vhost.h @@ -93,6 +93,7 @@ struct vhost_scsi_target { int abi_version; char vhost_wwpn[TRANSPORT_IQN_LEN]; unsigned short vhost_tpgt; + unsigned short reserved; }; /* VHOST_SCSI specific defines */ From 08a16208c8cb2ce1f79fea24f21dd7a8df4f12b6 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Sat, 18 Aug 2012 16:10:31 +0400 Subject: [PATCH 0820/1098] tcm_fc: rcu_deref outside rcu lock/unlock section Use rcu_dereference_protected in order to prevent lockdep complaint. Sequel of the patch 863555be Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov Acked-by: Mark D. Rustad Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_sess.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 87901fa74dd7..3c9e5b57caab 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -456,7 +456,9 @@ static void ft_prlo(struct fc_rport_priv *rdata) struct ft_tport *tport; mutex_lock(&ft_lport_lock); - tport = rcu_dereference(rdata->local_port->prov[FC_TYPE_FCP]); + tport = rcu_dereference_protected(rdata->local_port->prov[FC_TYPE_FCP], + lockdep_is_held(&ft_lport_lock)); + if (!tport) { mutex_unlock(&ft_lport_lock); return; From 39307655a1effa8d913bba054c0e985bfaca808c Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 16 Aug 2012 17:01:21 -0400 Subject: [PATCH 0821/1098] nfsd4: fix security flavor of NFSv4.0 callback Commit d5497fc693a446ce9100fcf4117c3f795ddfd0d2 "nfsd4: move rq_flavor into svc_cred" forgot to remove cl_flavor from the client, leaving two places (cl_flavor and cl_cred.cr_flavor) for the flavor to be stored. After that patch, the latter was the one that was updated, but the former was the one that the callback used. Symptoms were a long delay on utime(). This is because the utime() generated a setattr which recalled a delegation, but the cb_recall was ignored by the client because it had the wrong security flavor. Cc: stable@vger.kernel.org Tested-by: Jamie Heilman Reported-by: Jamie Heilman Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4callback.c | 4 ++-- fs/nfsd/state.h | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index cbaf4f8bb7b7..4c7bd35b1876 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -651,12 +651,12 @@ static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *c if (clp->cl_minorversion == 0) { if (!clp->cl_cred.cr_principal && - (clp->cl_flavor >= RPC_AUTH_GSS_KRB5)) + (clp->cl_cred.cr_flavor >= RPC_AUTH_GSS_KRB5)) return -EINVAL; args.client_name = clp->cl_cred.cr_principal; args.prognumber = conn->cb_prog, args.protocol = XPRT_TRANSPORT_TCP; - args.authflavor = clp->cl_flavor; + args.authflavor = clp->cl_cred.cr_flavor; clp->cl_cb_ident = conn->cb_ident; } else { if (!conn->cb_xprt) diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index e6173147f982..22bd0a66c356 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -231,7 +231,6 @@ struct nfs4_client { nfs4_verifier cl_verifier; /* generated by client */ time_t cl_time; /* time of last lease renewal */ struct sockaddr_storage cl_addr; /* client ipaddress */ - u32 cl_flavor; /* setclientid pseudoflavor */ struct svc_cred cl_cred; /* setclientid principal */ clientid_t cl_clientid; /* generated by server */ nfs4_verifier cl_confirm; /* generated by server */ From be1e44441a560c43c136a562d49a1c9623c91197 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 9 Aug 2012 18:12:28 -0400 Subject: [PATCH 0822/1098] svcrpc: fix BUG() in svc_tcp_clear_pages Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if sk_tcplen would lead us to expect n pages of data). svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen. This is OK, since both functions are serialized by XPT_BUSY. However, that means the inconsistency must be repaired before dropping XPT_BUSY. Therefore we should be ensuring that svc_tcp_save_pages repairs the problem before exiting svc_tcp_recv_record on error. Symptoms were a BUG() in svc_tcp_clear_pages. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 18bc130255a7..998aa8c1807c 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1129,9 +1129,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (len >= 0) svsk->sk_tcplen += len; if (len != want) { + svc_tcp_save_pages(svsk, rqstp); if (len < 0 && len != -EAGAIN) goto err_other; - svc_tcp_save_pages(svsk, rqstp); dprintk("svc: incomplete TCP record (%d of %d)\n", svsk->sk_tcplen, svsk->sk_reclen); goto err_noclose; From f06f00a24d76e168ecb38d352126fd203937b601 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 20 Aug 2012 16:04:40 -0400 Subject: [PATCH 0823/1098] svcrpc: sends on closed socket should stop immediately svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply. However, the XPT_CLOSE won't be acted on immediately. Meanwhile other threads could send further replies before the socket is really shut down. This can manifest as data corruption: for example, if a truncated read reply is followed by another rpc reply, that second reply will look to the client like further read data. Symptoms were data corruption preceded by svc_tcp_sendto logging something like kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket Cc: stable@vger.kernel.org Reported-by: Malahal Naineni Tested-by: Malahal Naineni Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 88f2bf671960..0d693a89434f 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -794,7 +794,8 @@ int svc_send(struct svc_rqst *rqstp) /* Grab mutex to serialize outgoing data. */ mutex_lock(&xprt->xpt_mutex); - if (test_bit(XPT_DEAD, &xprt->xpt_flags)) + if (test_bit(XPT_DEAD, &xprt->xpt_flags) + || test_bit(XPT_CLOSE, &xprt->xpt_flags)) len = -ENOTCONN; else len = xprt->xpt_ops->xpo_sendto(rqstp); From d10f27a750312ed5638c876e4bd6aa83664cccd8 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 17 Aug 2012 17:31:53 -0400 Subject: [PATCH 0824/1098] svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping The rpc server tries to ensure that there will be room to send a reply before it receives a request. It does this by tracking, in xpt_reserved, an upper bound on the total size of the replies that is has already committed to for the socket. Currently it is adding in the estimate for a new reply *before* it checks whether there is space available. If it finds that there is not space, it then subtracts the estimate back out. This may lead the subsequent svc_xprt_enqueue to decide that there is space after all. The results is a svc_recv() that will repeatedly return -EAGAIN, causing server threads to loop without doing any actual work. Cc: stable@vger.kernel.org Reported-by: Michael Tokarev Tested-by: Michael Tokarev Signed-off-by: J. Bruce Fields --- net/sunrpc/svc_xprt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 0d693a89434f..bac973a31367 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -316,7 +316,6 @@ static bool svc_xprt_has_something_to_do(struct svc_xprt *xprt) */ void svc_xprt_enqueue(struct svc_xprt *xprt) { - struct svc_serv *serv = xprt->xpt_server; struct svc_pool *pool; struct svc_rqst *rqstp; int cpu; @@ -362,8 +361,6 @@ void svc_xprt_enqueue(struct svc_xprt *xprt) rqstp, rqstp->rq_xprt); rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); pool->sp_stats.threads_woken++; wake_up(&rqstp->rq_wait); } else { @@ -640,8 +637,6 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) if (xprt) { rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); /* As there is a shortage of threads and this request * had to be queued, don't allow the thread to wait so @@ -738,6 +733,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) else len = xprt->xpt_ops->xpo_recvfrom(rqstp); dprintk("svc: got len=%d\n", len); + rqstp->rq_reserved = serv->sv_max_mesg; + atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); } svc_xprt_received(xprt); From 53e1719f3da0f095b8db1461bd12dd79f3246b84 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 20 Aug 2012 21:50:13 +0200 Subject: [PATCH 0825/1098] ALSA: snd-als100: fix suspend/resume snd_card_als100_probe() does not set pcm field in struct snd_sb. As a result, PCM is not suspended and applications don't know that they need to resume the playback. Tested with Labway A381-F20 card (ALS120). Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/isa/als100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/als100.c b/sound/isa/als100.c index 2d67c78c9f4b..f7cdaf51512d 100644 --- a/sound/isa/als100.c +++ b/sound/isa/als100.c @@ -233,7 +233,7 @@ static int __devinit snd_card_als100_probe(int dev, irq[dev], dma8[dev], dma16[dev]); } - if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) { + if ((error = snd_sb16dsp_pcm(chip, 0, &chip->pcm)) < 0) { snd_card_free(card); return error; } From c7a3a88c938fbe3d70c2278e082b80eb830d1c58 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 19 Aug 2012 19:10:42 +0200 Subject: [PATCH 0826/1098] uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails This patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=843640 If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path does unmap_region() but does not remove the soon-to-be-freed vma from rb tree. Actually there are more problems but this is how William noticed this bug. Perhaps we could do do_munmap() + return in this case, but in fact it is simply wrong to abort if uprobe_mmap() fails. Until at least we move the !UPROBE_COPY_INSN code from install_breakpoint() to uprobe_register(). For example, uprobe_mmap()->install_breakpoint() can fail if the probed insn is not supported (remember, uprobe_register() succeeds if nobody mmaps inode/offset), mmap() should not fail in this case. dup_mmap()->uprobe_mmap() is wrong too by the same reason, fork() can race with uprobe_register() and fail for no reason if it wins the race and does install_breakpoint() first. And, if nothing else, both mmap_region() and dup_mmap() return success if uprobe_mmap() fails. Change them to ignore the error code from uprobe_mmap(). Reported-and-tested-by: William Cohen Signed-off-by: Oleg Nesterov Acked-by: Srikar Dronamraju Cc: # v3.5 Cc: Anton Arapov Cc: William Cohen Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com Signed-off-by: Ingo Molnar --- kernel/fork.c | 4 ++-- mm/mmap.c | 5 ++--- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 3bd2280d79f6..2c8857e12855 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -455,8 +455,8 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm) if (retval) goto out; - if (file && uprobe_mmap(tmp)) - goto out; + if (file) + uprobe_mmap(tmp); } /* a new mm has just been created */ arch_dup_mmap(oldmm, mm); diff --git a/mm/mmap.c b/mm/mmap.c index e3e86914f11a..52e08fc9186d 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1356,9 +1356,8 @@ out: } else if ((flags & MAP_POPULATE) && !(flags & MAP_NONBLOCK)) make_pages_present(addr, addr + len); - if (file && uprobe_mmap(vma)) - /* matching probes but cannot insert */ - goto unmap_and_free_vma; + if (file) + uprobe_mmap(vma); return addr; From 73e8712aa02d924844fbd5bd84a2445a1c3f68d7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 20 Aug 2012 14:10:00 +0300 Subject: [PATCH 0827/1098] UBIFS: remove stale commentary Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index c3fa6c5327a3..71a197f0f93d 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1157,9 +1157,6 @@ static int check_free_space(struct ubifs_info *c) * * This function mounts UBIFS file system. Returns zero in case of success and * a negative error code in case of failure. - * - * Note, the function does not de-allocate resources it it fails half way - * through, and the caller has to do this instead. */ static int mount_ubifs(struct ubifs_info *c) { From 11e3be0be2a1314e0861304857e7efcaed5d3e54 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 20 Aug 2012 15:16:24 +0300 Subject: [PATCH 0828/1098] UBIFS: fix crash on error path This patch fixes a regression introduced by "4994297 UBIFS: make ubifs_lpt_init clean-up in case of failure" which I've hit while running the 'integck -p' test. When remount the file-system from R/O mode to R/W mode and 'lpt_init_wr()' fails, we free _all_ LPT resources by calling 'ubifs_lpt_free(c, 0)', even those needed for R/O mode. This leads to subsequent crashes, e.g., if we try to unmount the file-system. Cc: stable@vger.kernel.org [v3.5+] Signed-off-by: Artem Bityutskiy --- fs/ubifs/lpt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c index ce33b2beb151..8640920766ed 100644 --- a/fs/ubifs/lpt.c +++ b/fs/ubifs/lpt.c @@ -1749,7 +1749,10 @@ int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr) return 0; out_err: - ubifs_lpt_free(c, 0); + if (wr) + ubifs_lpt_free(c, 1); + if (rd) + ubifs_lpt_free(c, 0); return err; } From c212f4020de7b5d35a71327d1483120a698d60a0 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 21 Aug 2012 13:45:35 +0300 Subject: [PATCH 0829/1098] UBIFS: fix replay regression MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit "d51f17e UBIFS: simplify reply code a bit" introduces a bug with the following symptoms: UBIFS error (pid 1): replay_log_leb: first CS node at LEB 3:0 has wrong commit number 0 expected 1 The issue is that we start replaying the log from UBIFS_LOG_LNUM instead of c->lhead_lnum. This patch fixes that. Reported-by: Uwe Kleine-König Signed-off-by: Artem Bityutskiy --- fs/ubifs/replay.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c index eba46d4a7619..94d78fc5d4e0 100644 --- a/fs/ubifs/replay.c +++ b/fs/ubifs/replay.c @@ -1026,7 +1026,6 @@ int ubifs_replay_journal(struct ubifs_info *c) c->replaying = 1; lnum = c->ltail_lnum = c->lhead_lnum; - lnum = UBIFS_LOG_LNUM; do { err = replay_log_leb(c, lnum, 0, c->sbuf); if (err == 1) @@ -1035,7 +1034,7 @@ int ubifs_replay_journal(struct ubifs_info *c) if (err) goto out; lnum = ubifs_next_log_lnum(c, lnum); - } while (lnum != UBIFS_LOG_LNUM); + } while (lnum != c->ltail_lnum); err = replay_buds(c); if (err) From cbe05685c1859e655c663b6ff2d0f71093ee834d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Aug 2012 12:01:34 +0200 Subject: [PATCH 0830/1098] s390: Always use "long" for ssize_t to match size_t On s390x-linux-gcc, __SIZE_TYPE__ expands to "long unsigned int" for both 32-bit s390 and 64-bit s390x, as gcc-4.6.3-nolibc/s390x-linux/lib/gcc/s390x-linux/4.6.3/plugin/include/config/s390/linux.h has #define SIZE_TYPE (TARGET_64BIT ? "long unsigned int" : "long unsigned int") To match this, __kernel_size_t is always set to "long unsigned int". But while __kernel_ssize_t is "long" on 64-bit s390x, it is "int" on 32-bit s390, causing compiler warnings like: fs/quota/quota_tree.c:372:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Wformat] To fix this, __kernel_ssize_t should be "long", irrespective of word size. Signed-off-by: Geert Uytterhoeven Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/posix_types.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h index 7bcc14e395f0..bf2a2ad2f800 100644 --- a/arch/s390/include/asm/posix_types.h +++ b/arch/s390/include/asm/posix_types.h @@ -13,6 +13,7 @@ */ typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; #define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_dev_t; @@ -25,7 +26,6 @@ typedef unsigned short __kernel_mode_t; typedef unsigned short __kernel_ipc_pid_t; typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else /* __s390x__ */ @@ -35,7 +35,6 @@ typedef unsigned int __kernel_mode_t; typedef int __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ From 3ab484b8622b7b890ca8d2ab5ee034c217ee4eeb Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 14 Aug 2012 14:17:30 -0300 Subject: [PATCH 0831/1098] perf tools: Add missing files to build the python binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Changeset 0f6a3015: "perf tools: Support user regs and stack in sample parsing" uses hweight_long in evsel.c, so we need to drag util/hweight.c to the python binding. Ditto for ee8dd3c: "perf tools: Change strlist to use the new rblist" where we need to add util/rblist.c. Now twatch.py works again: # export PYTHONPATH=~acme/git/build/perf/python/ # ~acme/git/linux/tools/perf/python/twatch.py cpu: 4, pid: 23639, tid: 23639 { type: fork, pid: 30659, ppid: 23639, tid: 30659, ptid: 23639, time: 36287872076780} cpu: 5, pid: 30659, tid: 30659 { type: comm, pid: 30659, tid: 30659, comm: ls } cpu: 5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873681539} cpu: 4, pid: 23639, tid: 23639 { type: fork, pid: 30660, ppid: 23639, tid: 30660, ptid: 23639, time: 36291720420480} cpu: 5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873685714} cpu: 5, pid: 30660, tid: 30660 { type: comm, pid: 30660, tid: 30660, comm: git } ^C KeyboardInterrupt Reported-by: Jérôme Carretero Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-gmq82zp5blin9aml9g5tzokr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/python-ext-sources | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources index 2884e67ee625..213362850abd 100644 --- a/tools/perf/util/python-ext-sources +++ b/tools/perf/util/python-ext-sources @@ -10,10 +10,12 @@ util/ctype.c util/evlist.c util/evsel.c util/cpumap.c +util/hweight.c util/thread_map.c util/util.c util/xyarray.c util/cgroup.c util/debugfs.c +util/rblist.c util/strlist.c ../../lib/rbtree.c From 676bc2e1e4f9072f7a640d5b7c99ffdf9709a6e7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 09:55:01 -0400 Subject: [PATCH 0832/1098] Revert "drm/radeon: fix bo creation retry path" This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c. ttm_bo_init() destroys the BO on failure. So this patch makes the retry path work with freed memory. This ends up causing kernel panics when this path is hit. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_object.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1cb014b571ab..9024e7222839 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -132,6 +132,7 @@ int radeon_bo_create(struct radeon_device *rdev, acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size, sizeof(struct radeon_bo)); +retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) return -ENOMEM; @@ -145,8 +146,6 @@ int radeon_bo_create(struct radeon_device *rdev, bo->surface_reg = -1; INIT_LIST_HEAD(&bo->list); INIT_LIST_HEAD(&bo->va); - -retry: radeon_ttm_placement_from_domain(bo, domain); /* Kernel allocation are uninterruptible */ down_read(&rdev->pm.mclk_lock); From ec5da7f8dc023fc4dcbdd42e87dad231d2c2812d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 21 Aug 2012 16:40:07 +1000 Subject: [PATCH 0833/1098] fbcon: fix race condition between console lock and cursor timer So we've had a fair few reports of fbcon handover breakage between efi/vesafb and i915 surface recently, so I dedicated a couple of days to finding the problem. Essentially the last thing we saw was the conflicting framebuffer message and that was all. So after much tracing with direct netconsole writes (printks under console_lock not so useful), I think I found the race. Thread A (driver load) Thread B (timer thread) unbind_con_driver -> | bind_con_driver -> | vc->vc_sw->con_deinit -> | fbcon_deinit -> | console_lock() | | | | fbcon_flashcursor timer fires | console_lock() <- blocked for A | | fbcon_del_cursor_timer -> del_timer_sync (BOOM) Of course because all of this is under the console lock, we never see anything, also since we also just unbound the active console guess what we never see anything. Hopefully this fixes the problem for anyone seeing vesafb->kms driver handoff. Signed-off-by: David Airlie Acked-by: Alan Cox Cc: stable@vger.kernel.org Tested-by: Josh Boyer Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2e471c22abf5..f8a79fca4a22 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -372,8 +372,12 @@ static void fb_flashcursor(struct work_struct *work) struct vc_data *vc = NULL; int c; int mode; + int ret; + + ret = console_trylock(); + if (ret == 0) + return; - console_lock(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; From f341861fb0b701139849f8a85c2d3cdff466e8e8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 15:05:14 +0200 Subject: [PATCH 0834/1098] task_work: add a scheduling point in task_work_run() It seems commit 4a9d4b024a31 ("switch fput to task_work_add") re- introduced the problem addressed in 944be0b22472 ("close_files(): add scheduling point") If a server process with a lot of files (say 2 million tcp sockets) is killed, we can spend a lot of time in task_work_run() and trigger a soft lockup. Signed-off-by: Eric Dumazet Signed-off-by: Linus Torvalds --- kernel/task_work.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/task_work.c b/kernel/task_work.c index 91d4e1742a0c..d320d44903bd 100644 --- a/kernel/task_work.c +++ b/kernel/task_work.c @@ -75,6 +75,7 @@ void task_work_run(void) p = q->next; q->func(q); q = p; + cond_resched(); } } } From 3a245cbef6a9e4398456bd733b0b4b7cb3f11994 Mon Sep 17 00:00:00 2001 From: Thomas Huehn Date: Wed, 15 Aug 2012 22:48:35 +0200 Subject: [PATCH 0835/1098] ath5k: fix wrong max power per rate eeprom reads for 802.11a This patch reduces the per rate target power eeprom reads for AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid power curve entries on the eeprom. The former 10 reads lead to equal max power limits per rate and this causes an increasing distortion for all rates above 24 MBit and leads to a needless poor performance in 802.11a mode. Signed-off-by: Thomas Huehn Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 2 +- drivers/net/wireless/ath/ath5k/eeprom.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 4026c906cc7b..b7e0258887e7 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) case AR5K_EEPROM_MODE_11A: offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); rate_pcal_info = ee->ee_rate_tpwr_a; - ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; break; case AR5K_EEPROM_MODE_11B: offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index dc2bcfeadeb4..94a9bbea6874 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -182,6 +182,7 @@ #define AR5K_EEPROM_EEP_DELTA 10 #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 From 7b4e6cfbae304177b8edc0c12341b4896cab3f2d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 11:49:58 +0200 Subject: [PATCH 0836/1098] drivers/net/wireless/ipw2x00/ipw2100.c: introduce missing initialization The result of one call to a function is tested, and then at the second call to the same function, the previous result, and not the current result, is tested again. Also changed &bssid to bssid, at the suggestion of Stanislav Yakovlev. The semantic match that finds the first problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression ret; identifier f; statement S1,S2; @@ *ret = f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S1 ... when any *f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S2 // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 95aa8e1683ec..83324b321652 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) return; } len = ETH_ALEN; - ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len); + ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid, + &len); if (ret) { IPW_DEBUG_INFO("failed querying ordinals at line %d\n", __LINE__); From 94543a8d4fb302817014981489f15cb3b92ec3c2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Aug 2012 18:57:10 +0200 Subject: [PATCH 0837/1098] iwlwifi: fix flow handler debug code iwl_dbgfs_fh_reg_read() can cause crashes and/or BUG_ON in slub because the ifdefs are wrong, the code in iwl_dump_fh() should use DEBUGFS, not DEBUG to protect the buffer writing code. Also, while at it, clean up the arguments to the function, some code and make it generally safer. Cc: stable@vger.kernel.org Reported-by: Benjamin Herrenschmidt Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/pcie/internal.h | 2 +- drivers/net/wireless/iwlwifi/pcie/rx.c | 2 +- drivers/net/wireless/iwlwifi/pcie/trans.c | 30 +++++++++++--------- 3 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d9694c58208c..4ffc18dc3a57 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q); /***************************************************** * Error handling ******************************************************/ -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display); +int iwl_dump_fh(struct iwl_trans *trans, char **buf); void iwl_dump_csr(struct iwl_trans *trans); /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 39a6ca1f009c..d1a61ba6247a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans) } iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); + iwl_dump_fh(trans, NULL); iwl_op_mode_nic_error(trans->op_mode); } diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 939c2f78df58..1e86ea2266d4 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd) #undef IWL_CMD } -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) +int iwl_dump_fh(struct iwl_trans *trans, char **buf) { int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif static const u32 fh_tbl[] = { FH_RSCSR_CHNL0_STTS_WPTR_REG, FH_RSCSR_CHNL0_RBDCB_BASE_REG, @@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) FH_TSSR_TX_STATUS_REG, FH_TSSR_TX_ERROR_REG }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + +#ifdef CONFIG_IWLWIFI_DEBUGFS + if (buf) { + int pos = 0; + size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); if (!*buf) return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) pos += scnprintf(*buf + pos, bufsz - pos, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return pos; } #endif + IWL_ERR(trans, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) IWL_ERR(trans, " %34s: 0X%08x\n", get_fh_string(fh_tbl[i]), iwl_read_direct32(trans, fh_tbl[i])); - } + return 0; } @@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_trans *trans = file->private_data; - char *buf; + char *buf = NULL; int pos = 0; ssize_t ret = -EFAULT; - ret = pos = iwl_dump_fh(trans, &buf, true); + ret = pos = iwl_dump_fh(trans, &buf); if (buf) { ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); From 4fc79db178f0a0ede479b4713e00df2d106028b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Aug 2012 18:57:11 +0200 Subject: [PATCH 0838/1098] iwlwifi: protect SRAM debugfs If the device is not started, we can't read its SRAM and attempting to do so will cause issues. Protect the debugfs read. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/dvm/debugfs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 46782f1102ac..a47b306b522c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, const struct fw_img *img; size_t bufsz; + if (!iwl_is_ready_rf(priv)) + return -EAGAIN; + /* default is to dump the entire data segment */ if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { priv->dbgfs_sram_offset = 0x800000; From af74115eed22698f771fec1287a864975c9a6671 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 15 Aug 2012 21:24:52 -0700 Subject: [PATCH 0839/1098] target: Remove unused se_cmd.cmd_spdtl This was originally for helping fabrics to determine overflow/underflow status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 -- include/target/target_core_base.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index ea9a3d2e4f55..4de3186dc44e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1165,8 +1165,6 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) " 0x%02x\n", cmd->se_tfo->get_fabric_name(), cmd->data_length, size, cmd->t_task_cdb[0]); - cmd->cmd_spdtl = size; - if (cmd->data_direction == DMA_TO_DEVICE) { pr_err("Rejecting underflow/overflow" " WRITE data\n"); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 128ce46fa48a..015cea01ae39 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -503,8 +503,6 @@ struct se_cmd { u32 se_ordered_id; /* Total size in bytes associated with command */ u32 data_length; - /* SCSI Presented Data Transfer Length */ - u32 cmd_spdtl; u32 residual_count; u32 orig_fe_lun; /* Persistent Reservation key */ From 144d56e91044181ec0ef67aeca91e9a8b5718348 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Aug 2012 00:22:46 +0000 Subject: [PATCH 0840/1098] tcp: fix possible socket refcount problem Commit 6f458dfb40 (tcp: improve latencies of timer triggered events) added bug leading to following trace : [ 2866.131281] IPv4: Attempt to release TCP socket in state 1 ffff880019ec0000 [ 2866.131726] [ 2866.132188] ========================= [ 2866.132281] [ BUG: held lock freed! ] [ 2866.132281] 3.6.0-rc1+ #622 Not tainted [ 2866.132281] ------------------------- [ 2866.132281] kworker/0:1/652 is freeing memory ffff880019ec0000-ffff880019ec0a1f, with a lock still held there! [ 2866.132281] (sk_lock-AF_INET-RPC){+.+...}, at: [] tcp_sendmsg+0x29/0xcc6 [ 2866.132281] 4 locks held by kworker/0:1/652: [ 2866.132281] #0: (rpciod){.+.+.+}, at: [] process_one_work+0x1de/0x47f [ 2866.132281] #1: ((&task->u.tk_work)){+.+.+.}, at: [] process_one_work+0x1de/0x47f [ 2866.132281] #2: (sk_lock-AF_INET-RPC){+.+...}, at: [] tcp_sendmsg+0x29/0xcc6 [ 2866.132281] #3: (&icsk->icsk_retransmit_timer){+.-...}, at: [] run_timer_softirq+0x1ad/0x35f [ 2866.132281] [ 2866.132281] stack backtrace: [ 2866.132281] Pid: 652, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #622 [ 2866.132281] Call Trace: [ 2866.132281] [] debug_check_no_locks_freed+0x112/0x159 [ 2866.132281] [] ? __sk_free+0xfd/0x114 [ 2866.132281] [] kmem_cache_free+0x6b/0x13a [ 2866.132281] [] __sk_free+0xfd/0x114 [ 2866.132281] [] sk_free+0x1c/0x1e [ 2866.132281] [] tcp_write_timer+0x51/0x56 [ 2866.132281] [] run_timer_softirq+0x218/0x35f [ 2866.132281] [] ? run_timer_softirq+0x1ad/0x35f [ 2866.132281] [] ? rb_commit+0x58/0x85 [ 2866.132281] [] ? tcp_write_timer_handler+0x148/0x148 [ 2866.132281] [] __do_softirq+0xcb/0x1f9 [ 2866.132281] [] ? _raw_spin_unlock+0x29/0x2e [ 2866.132281] [] call_softirq+0x1c/0x30 [ 2866.132281] [] do_softirq+0x4a/0xa6 [ 2866.132281] [] irq_exit+0x51/0xad [ 2866.132281] [] do_IRQ+0x9d/0xb4 [ 2866.132281] [] common_interrupt+0x6f/0x6f [ 2866.132281] [] ? sched_clock_cpu+0x58/0xd1 [ 2866.132281] [] ? _raw_spin_unlock_irqrestore+0x4c/0x56 [ 2866.132281] [] mod_timer+0x178/0x1a9 [ 2866.132281] [] sk_reset_timer+0x19/0x26 [ 2866.132281] [] tcp_rearm_rto+0x99/0xa4 [ 2866.132281] [] tcp_event_new_data_sent+0x6e/0x70 [ 2866.132281] [] tcp_write_xmit+0x7de/0x8e4 [ 2866.132281] [] ? __alloc_skb+0xa0/0x1a1 [ 2866.132281] [] __tcp_push_pending_frames+0x2e/0x8a [ 2866.132281] [] tcp_sendmsg+0xb32/0xcc6 [ 2866.132281] [] inet_sendmsg+0xaa/0xd5 [ 2866.132281] [] ? inet_autobind+0x5f/0x5f [ 2866.132281] [] ? trace_clock_local+0x9/0xb [ 2866.132281] [] sock_sendmsg+0xa3/0xc4 [ 2866.132281] [] ? rb_reserve_next_event+0x26f/0x2d5 [ 2866.132281] [] ? native_sched_clock+0x29/0x6f [ 2866.132281] [] ? sched_clock+0x9/0xd [ 2866.132281] [] ? trace_clock_local+0x9/0xb [ 2866.132281] [] kernel_sendmsg+0x37/0x43 [ 2866.132281] [] xs_send_kvec+0x77/0x80 [ 2866.132281] [] xs_sendpages+0x6f/0x1a0 [ 2866.132281] [] ? try_to_del_timer_sync+0x55/0x61 [ 2866.132281] [] xs_tcp_send_request+0x55/0xf1 [ 2866.132281] [] xprt_transmit+0x89/0x1db [ 2866.132281] [] ? call_connect+0x3c/0x3c [ 2866.132281] [] call_transmit+0x1c5/0x20e [ 2866.132281] [] __rpc_execute+0x6f/0x225 [ 2866.132281] [] ? call_connect+0x3c/0x3c [ 2866.132281] [] rpc_async_schedule+0x28/0x34 [ 2866.132281] [] process_one_work+0x24d/0x47f [ 2866.132281] [] ? process_one_work+0x1de/0x47f [ 2866.132281] [] ? __rpc_execute+0x225/0x225 [ 2866.132281] [] worker_thread+0x236/0x317 [ 2866.132281] [] ? process_scheduled_works+0x2f/0x2f [ 2866.132281] [] kthread+0x9a/0xa2 [ 2866.132281] [] kernel_thread_helper+0x4/0x10 [ 2866.132281] [] ? retint_restore_args+0x13/0x13 [ 2866.132281] [] ? __init_kthread_worker+0x5a/0x5a [ 2866.132281] [] ? gs_change+0x13/0x13 [ 2866.308506] IPv4: Attempt to release TCP socket in state 1 ffff880019ec0000 [ 2866.309689] ============================================================================= [ 2866.310254] BUG TCP (Not tainted): Object already free [ 2866.310254] ----------------------------------------------------------------------------- [ 2866.310254] The bug comes from the fact that timer set in sk_reset_timer() can run before we actually do the sock_hold(). socket refcount reaches zero and we free the socket too soon. timer handler is not allowed to reduce socket refcnt if socket is owned by the user, or we need to change sk_reset_timer() implementation. We should take a reference on the socket in case TCP_DELACK_TIMER_DEFERRED or TCP_DELACK_TIMER_DEFERRED bit are set in tsq_flags Also fix a typo in tcp_delack_timer(), where TCP_WRITE_TIMER_DEFERRED was used instead of TCP_DELACK_TIMER_DEFERRED. For consistency, use same socket refcount change for TCP_MTU_REDUCED_DEFERRED, even if not fired from a timer. Reported-by: Fengguang Wu Tested-by: Fengguang Wu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 8 +++++--- net/ipv4/tcp_output.c | 14 +++++++++----- net/ipv4/tcp_timer.c | 6 ++++-- 3 files changed, 18 insertions(+), 10 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 5bf2040b25b1..00a748d14062 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -417,10 +417,12 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info) if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */ tp->mtu_info = info; - if (!sock_owned_by_user(sk)) + if (!sock_owned_by_user(sk)) { tcp_v4_mtu_reduced(sk); - else - set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags); + } else { + if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags)) + sock_hold(sk); + } goto out; } diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 20dfd892c86f..d04632673a9e 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -910,14 +910,18 @@ void tcp_release_cb(struct sock *sk) if (flags & (1UL << TCP_TSQ_DEFERRED)) tcp_tsq_handler(sk); - if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) + if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) { tcp_write_timer_handler(sk); - - if (flags & (1UL << TCP_DELACK_TIMER_DEFERRED)) + __sock_put(sk); + } + if (flags & (1UL << TCP_DELACK_TIMER_DEFERRED)) { tcp_delack_timer_handler(sk); - - if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) + __sock_put(sk); + } + if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) { sk->sk_prot->mtu_reduced(sk); + __sock_put(sk); + } } EXPORT_SYMBOL(tcp_release_cb); diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 6df36ad55a38..b774a03bd1dc 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -252,7 +252,8 @@ static void tcp_delack_timer(unsigned long data) inet_csk(sk)->icsk_ack.blocked = 1; NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_DELAYEDACKLOCKED); /* deleguate our work to tcp_release_cb() */ - set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags); + if (!test_and_set_bit(TCP_DELACK_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags)) + sock_hold(sk); } bh_unlock_sock(sk); sock_put(sk); @@ -481,7 +482,8 @@ static void tcp_write_timer(unsigned long data) tcp_write_timer_handler(sk); } else { /* deleguate our work to tcp_release_cb() */ - set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags); + if (!test_and_set_bit(TCP_WRITE_TIMER_DEFERRED, &tcp_sk(sk)->tsq_flags)) + sock_hold(sk); } bh_unlock_sock(sk); sock_put(sk); From 1a7b27c97ce675b42eeb7bfaf6e15c34f35c8f95 Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Mon, 20 Aug 2012 02:52:09 +0000 Subject: [PATCH 0841/1098] ipv4: Use newinet->inet_opt in inet_csk_route_child_sock() Since 0e734419923bd ("ipv4: Use inet_csk_route_child_sock() in DCCP and TCP."), inet_csk_route_child_sock() is called instead of inet_csk_route_req(). However, after creating the child-sock in tcp/dccp_v4_syn_recv_sock(), ireq->opt is set to NULL, before calling inet_csk_route_child_sock(). Thus, inside inet_csk_route_child_sock() opt is always NULL and the SRR-options are not respected anymore. Packets sent by the server won't have the correct destination-IP. This patch fixes it by accessing newinet->inet_opt instead of ireq->opt inside inet_csk_route_child_sock(). Reported-by: Luca Boccassi Signed-off-by: Christoph Paasch Signed-off-by: David S. Miller --- net/ipv4/inet_connection_sock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index db0cf17c00f7..7f75f21d7b83 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -404,12 +404,15 @@ struct dst_entry *inet_csk_route_child_sock(struct sock *sk, { const struct inet_request_sock *ireq = inet_rsk(req); struct inet_sock *newinet = inet_sk(newsk); - struct ip_options_rcu *opt = ireq->opt; + struct ip_options_rcu *opt; struct net *net = sock_net(sk); struct flowi4 *fl4; struct rtable *rt; fl4 = &newinet->cork.fl.u.ip4; + + rcu_read_lock(); + opt = rcu_dereference(newinet->inet_opt); flowi4_init_output(fl4, sk->sk_bound_dev_if, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, sk->sk_protocol, inet_sk_flowi_flags(sk), @@ -421,11 +424,13 @@ struct dst_entry *inet_csk_route_child_sock(struct sock *sk, goto no_route; if (opt && opt->opt.is_strictroute && rt->rt_gateway) goto route_err; + rcu_read_unlock(); return &rt->dst; route_err: ip_rt_put(rt); no_route: + rcu_read_unlock(); IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES); return NULL; } From a9915a1b52df52ad87f3b33422da95cf25372f09 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Aug 2012 07:26:45 +0000 Subject: [PATCH 0842/1098] ipv4: fix ip header ident selection in __ip_make_skb() Christian Casteyde reported a kmemcheck 32-bit read from uninitialized memory in __ip_select_ident(). It turns out that __ip_make_skb() called ip_select_ident() before properly initializing iph->daddr. This is a bug uncovered by commit 1d861aa4b3fb (inet: Minimize use of cached route inetpeer.) Addresses https://bugzilla.kernel.org/show_bug.cgi?id=46131 Reported-by: Christian Casteyde Signed-off-by: Eric Dumazet Cc: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 147ccc3e93db..c196d749daf2 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1338,10 +1338,10 @@ struct sk_buff *__ip_make_skb(struct sock *sk, iph->ihl = 5; iph->tos = inet->tos; iph->frag_off = df; - ip_select_ident(iph, &rt->dst, sk); iph->ttl = ttl; iph->protocol = sk->sk_protocol; ip_copy_addrs(iph, fl4); + ip_select_ident(iph, &rt->dst, sk); if (opt) { iph->ihl += opt->optlen>>2; From e0e3cea46d31d23dc40df0a49a7a2c04fe8edfea Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 06:21:17 +0000 Subject: [PATCH 0843/1098] af_netlink: force credentials passing [CVE-2012-3520] Pablo Neira Ayuso discovered that avahi and potentially NetworkManager accept spoofed Netlink messages because of a kernel bug. The kernel passes all-zero SCM_CREDENTIALS ancillary data to the receiver if the sender did not provide such data, instead of not including any such data at all or including the correct data from the peer (as it is the case with AF_UNIX). This bug was introduced in commit 16e572626961 (af_unix: dont send SCM_CREDENTIALS by default) This patch forces passing credentials for netlink, as before the regression. Another fix would be to not add SCM_CREDENTIALS in netlink messages if not provided by the sender, but it might break some programs. With help from Florian Weimer & Petr Matousek This issue is designated as CVE-2012-3520 Signed-off-by: Eric Dumazet Cc: Petr Matousek Cc: Florian Weimer Cc: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/net/scm.h | 4 +++- net/netlink/af_netlink.c | 2 +- net/unix/af_unix.c | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/include/net/scm.h b/include/net/scm.h index 079d7887dac1..7dc0854f0b38 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -70,9 +70,11 @@ static __inline__ void scm_destroy(struct scm_cookie *scm) } static __inline__ int scm_send(struct socket *sock, struct msghdr *msg, - struct scm_cookie *scm) + struct scm_cookie *scm, bool forcecreds) { memset(scm, 0, sizeof(*scm)); + if (forcecreds) + scm_set_cred(scm, task_tgid(current), current_cred()); unix_get_peersec_dgram(sock, scm); if (msg->msg_controllen <= 0) return 0; diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 5463969da45b..1445d73533ed 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1362,7 +1362,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &scm; - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, true); if (err < 0) return err; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index e4768c180da2..c5ee4ff61364 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1450,7 +1450,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; wait_for_unix_gc(); - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, false); if (err < 0) return err; @@ -1619,7 +1619,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, if (NULL == siocb->scm) siocb->scm = &tmp_scm; wait_for_unix_gc(); - err = scm_send(sock, msg, siocb->scm); + err = scm_send(sock, msg, siocb->scm, false); if (err < 0) return err; From 9974e43d900af7979e0a571b8e0c9674c7399b79 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 21 Aug 2012 17:20:30 +0200 Subject: [PATCH 0844/1098] ide: fix generic_ide_suspend/resume Oops This patch fixes a regresion introduced by commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Suspend oopses in generic_ide_suspend() because dev_get_drvdata() returns NULL (dev->p->driver_data == NULL) and this function is not prepared for this. Fix is based on Alan Stern's suggestion. Signed-off-by: Miklos Szeredi Acked-by: Rafael J. Wysocki Signed-off-by: David S. Miller --- drivers/ide/ide-pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 92406097efeb..8d1e32d7cd97 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -4,7 +4,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -40,7 +40,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; From 5317670692f61675394db2eb6713484b67383750 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 18:52:56 -0400 Subject: [PATCH 0845/1098] drm/radeon/ss: use num_crtc rather than hardcoded 6 When checking if a pll is in use. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index cb18813c7df0..f4d4505fe831 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -452,7 +452,7 @@ static void atombios_crtc_program_ss(struct radeon_device *rdev, union atom_enable_ss args; if (!enable) { - for (i = 0; i < 6; i++) { + for (i = 0; i < rdev->num_crtc; i++) { if (rdev->mode_info.crtcs[i] && rdev->mode_info.crtcs[i]->enabled && i != crtc_id && From 6c5e50fa614fea5325a2973be06f7ec6f1055316 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 21 Aug 2012 15:55:25 -0700 Subject: [PATCH 0846/1098] ceph: tolerate (and warn on) extraneous dentry from mds If the MDS gives us a dentry and we weren't prepared to handle it, WARN_ON_ONCE instead of crashing. Reported-by: Yan, Zheng Signed-off-by: Sage Weil Reviewed-by: Alex Elder --- fs/ceph/inode.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 9fff9f3b17e4..4b5762ef7c2b 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -992,11 +992,15 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, if (rinfo->head->is_dentry) { struct inode *dir = req->r_locked_dir; - err = fill_inode(dir, &rinfo->diri, rinfo->dirfrag, - session, req->r_request_started, -1, - &req->r_caps_reservation); - if (err < 0) - return err; + if (dir) { + err = fill_inode(dir, &rinfo->diri, rinfo->dirfrag, + session, req->r_request_started, -1, + &req->r_caps_reservation); + if (err < 0) + return err; + } else { + WARN_ON_ONCE(1); + } } /* @@ -1004,6 +1008,7 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req, * will have trouble splicing in the virtual snapdir later */ if (rinfo->head->is_dentry && !req->r_aborted && + req->r_locked_dir && (rinfo->head->is_target || strncmp(req->r_dentry->d_name.name, fsc->mount_options->snapdir_name, req->r_dentry->d_name.len))) { From 6d4221b53707486dfad3f5bfe568d2ce7f4c9863 Mon Sep 17 00:00:00 2001 From: Jim Schutt Date: Fri, 10 Aug 2012 10:37:38 -0700 Subject: [PATCH 0847/1098] libceph: avoid truncation due to racing banners Because the Ceph client messenger uses a non-blocking connect, it is possible for the sending of the client banner to race with the arrival of the banner sent by the peer. When ceph_sock_state_change() notices the connect has completed, it schedules work to process the socket via con_work(). During this time the peer is writing its banner, and arrival of the peer banner races with con_work(). If con_work() calls try_read() before the peer banner arrives, there is nothing for it to do, after which con_work() calls try_write() to send the client's banner. In this case Ceph's protocol negotiation can complete succesfully. The server-side messenger immediately sends its banner and addresses after accepting a connect request, *before* actually attempting to read or verify the banner from the client. As a result, it is possible for the banner from the server to arrive before con_work() calls try_read(). If that happens, try_read() will read the banner and prepare protocol negotiation info via prepare_write_connect(). prepare_write_connect() calls con_out_kvec_reset(), which discards the as-yet-unsent client banner. Next, con_work() calls try_write(), which sends the protocol negotiation info rather than the banner that the peer is expecting. The result is that the peer sees an invalid banner, and the client reports "negotiation failed". Fix this by moving con_out_kvec_reset() out of prepare_write_connect() to its callers at all locations except the one where the banner might still need to be sent. [elder@inktak.com: added note about server-side behavior] Signed-off-by: Jim Schutt Reviewed-by: Alex Elder --- net/ceph/messenger.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index b9796750034a..24c5eea8c45b 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -915,7 +915,6 @@ static int prepare_write_connect(struct ceph_connection *con) con->out_connect.authorizer_len = auth ? cpu_to_le32(auth->authorizer_buf_len) : 0; - con_out_kvec_reset(con); con_out_kvec_add(con, sizeof (con->out_connect), &con->out_connect); if (auth && auth->authorizer_buf_len) @@ -1557,6 +1556,7 @@ static int process_connect(struct ceph_connection *con) return -1; } con->auth_retry = 1; + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1577,6 +1577,7 @@ static int process_connect(struct ceph_connection *con) ENTITY_NAME(con->peer_name), ceph_pr_addr(&con->peer_addr.in_addr)); reset_connection(con); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1601,6 +1602,7 @@ static int process_connect(struct ceph_connection *con) le32_to_cpu(con->out_connect.connect_seq), le32_to_cpu(con->in_reply.connect_seq)); con->connect_seq = le32_to_cpu(con->in_reply.connect_seq); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -1617,6 +1619,7 @@ static int process_connect(struct ceph_connection *con) le32_to_cpu(con->in_reply.global_seq)); get_global_seq(con->msgr, le32_to_cpu(con->in_reply.global_seq)); + con_out_kvec_reset(con); ret = prepare_write_connect(con); if (ret < 0) return ret; @@ -2135,7 +2138,11 @@ more: BUG_ON(con->state != CON_STATE_CONNECTING); con->state = CON_STATE_NEGOTIATING; - /* Banner is good, exchange connection info */ + /* + * Received banner is good, exchange connection info. + * Do not reset out_kvec, as sending our banner raced + * with receiving peer banner after connect completed. + */ ret = prepare_write_connect(con); if (ret < 0) goto out; From 45f2e081f573526977abfa781a12728f83e9641f Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 21 Aug 2012 12:11:51 -0700 Subject: [PATCH 0848/1098] ceph: avoid divide by zero in __validate_layout() If "l->stripe_unit" is zero the the mod on the next line will cause a divide by zero bug. This comes from the copy_from_user() in ceph_ioctl_set_layout_policy(). Passing 0 is valid, though (it means "do not change") so avoid the % check in that case. Reported-by: Dan Carpenter Signed-off-by: Sage Weil Reviewed-by: Alex Elder --- fs/ceph/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c index 8e3fb69fbe62..1396ceb46797 100644 --- a/fs/ceph/ioctl.c +++ b/fs/ceph/ioctl.c @@ -42,7 +42,8 @@ static long __validate_layout(struct ceph_mds_client *mdsc, /* validate striping parameters */ if ((l->object_size & ~PAGE_MASK) || (l->stripe_unit & ~PAGE_MASK) || - ((unsigned)l->object_size % (unsigned)l->stripe_unit)) + (l->stripe_unit != 0 && + ((unsigned)l->object_size % (unsigned)l->stripe_unit))) return -EINVAL; /* make sure it's a valid data pool */ From f5869a8308f77e3dfdc2e3640842b285aa788ff8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 20 Aug 2012 14:44:52 +0000 Subject: [PATCH 0849/1098] drm: stop vmgfx driver explosion If you do a page flip with no flags set then event is NULL. If event is NULL then the vmw_gfx driver likes to go digging into NULL and extracts NULL->base.file_priv. On a modern kernel with NULL mapping protection it's just another oops, without it there are some "intriguing" possibilities. What it should do is an open question but that for the driver owners to sort out. Signed-off-by: Alan Cox Reviewed-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 6b0078ffa763..c50724bd30f6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1688,15 +1688,19 @@ int vmw_du_page_flip(struct drm_crtc *crtc, struct vmw_private *dev_priv = vmw_priv(crtc->dev); struct drm_framebuffer *old_fb = crtc->fb; struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(fb); - struct drm_file *file_priv = event->base.file_priv; + struct drm_file *file_priv ; struct vmw_fence_obj *fence = NULL; struct drm_clip_rect clips; int ret; + if (event == NULL) + return -EINVAL; + /* require ScreenObject support for page flipping */ if (!dev_priv->sou_priv) return -ENOSYS; + file_priv = event->base.file_priv; if (!vmw_kms_screen_object_flippable(dev_priv, crtc)) return -EINVAL; From 04ccfe77f132b973659f11954443214659014072 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 17 Aug 2012 14:20:02 +0000 Subject: [PATCH 0850/1098] drm: Remove two unused fields from struct drm_display_mode Signed-off-by: Damien Lespiau Reviewed-by: Jani Nikula Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_modes.c | 3 --- include/drm/drm_crtc.h | 2 -- 2 files changed, 5 deletions(-) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index b7adb4a967fd..28637c181b15 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -706,9 +706,6 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); - - p->crtc_hadjusted = false; - p->crtc_vadjusted = false; } EXPORT_SYMBOL(drm_mode_set_crtcinfo); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index a1a0386e0160..ced362533e3c 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -166,8 +166,6 @@ struct drm_display_mode { int crtc_vsync_start; int crtc_vsync_end; int crtc_vtotal; - int crtc_hadjusted; - int crtc_vadjusted; /* Driver private mode info */ int private_size; From d5c2c20e356ddcb597ee7099dc874bdac774884b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 17 Aug 2012 02:55:48 +0000 Subject: [PATCH 0851/1098] drm/udl: dpms off the crtc when disabled. This turns off the crtc when its been disabled, fixes it not turning off properly the whole time. Signed-off-by: Dave Airlie Reviewed-by: Alex Deucher --- drivers/gpu/drm/udl/udl_modeset.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c index f5dd89e891de..9159d48d1dfd 100644 --- a/drivers/gpu/drm/udl/udl_modeset.c +++ b/drivers/gpu/drm/udl/udl_modeset.c @@ -354,8 +354,7 @@ static int udl_crtc_mode_set(struct drm_crtc *crtc, static void udl_crtc_disable(struct drm_crtc *crtc) { - - + udl_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); } static void udl_crtc_destroy(struct drm_crtc *crtc) From 27fc4f1c0be917b1e5cef934783f9b09e28e92ea Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 1 Aug 2012 17:15:30 +0530 Subject: [PATCH 0852/1098] drm: Add missing static storage class specifiers in drm_proc.c file Fixes the following sparse warning: drivers/gpu/drm/drm_proc.c:92:5: warning: symbol 'drm_proc_create_files' was not declared. Should it be static? drivers/gpu/drm/drm_proc.c:175:5: warning: symbol 'drm_proc_remove_files' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c index 371c695322d9..da457b18eaaf 100644 --- a/drivers/gpu/drm/drm_proc.c +++ b/drivers/gpu/drm/drm_proc.c @@ -89,7 +89,7 @@ static const struct file_operations drm_proc_fops = { * Create a given set of proc files represented by an array of * gdm_proc_lists in the given root directory. */ -int drm_proc_create_files(struct drm_info_list *files, int count, +static int drm_proc_create_files(struct drm_info_list *files, int count, struct proc_dir_entry *root, struct drm_minor *minor) { struct drm_device *dev = minor->dev; @@ -172,7 +172,7 @@ int drm_proc_init(struct drm_minor *minor, int minor_id, return 0; } -int drm_proc_remove_files(struct drm_info_list *files, int count, +static int drm_proc_remove_files(struct drm_info_list *files, int count, struct drm_minor *minor) { struct list_head *pos, *q; From 4f9c1397e2e80e52b17ec4e39760caa807bd15c7 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 8 Aug 2012 09:07:38 +0800 Subject: [PATCH 0853/1098] PCI/PM: Enable D3/D3cold by default for most devices This patch fixes the following bug: http://marc.info/?l=linux-usb&m=134318961120825&w=2 Originally, device lower power states include D1, D2, D3. After that, D3 is further divided into D3hot and D3cold. To support both scenario safely, original D3 is mapped to D3cold. When adding D3cold support, because worry about some device may have broken D3cold support, D3cold is disabled by default. This disable D3 on original platform too. But some original platform may only have working D3, but no working D1, D2. The root cause of the above bug is it too. To deal with this, this patch enables D3/D3cold by default for most devices. This restores the original behavior. For some devices that suspected to have broken D3cold support, such as PCIe port, D3cold is disabled by default. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki --- drivers/pci/pci.c | 1 + drivers/pci/pcie/portdrv_pci.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f3ea977a5b1b..ab4bf5a4c2f1 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1941,6 +1941,7 @@ void pci_pm_init(struct pci_dev *dev) dev->pm_cap = pm; dev->d3_delay = PCI_PM_D3_WAIT; dev->d3cold_delay = PCI_PM_D3COLD_WAIT; + dev->d3cold_allowed = true; dev->d1_support = false; dev->d2_support = false; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 3a7eefcb270a..62f5a76c8f80 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -200,6 +200,11 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return status; pci_save_state(dev); + /* + * D3cold may not work properly on some PCIe port, so disable + * it by default. + */ + dev->d3cold_allowed = false; if (!pci_match_id(port_runtime_pm_black_list, dev)) pm_runtime_put_noidle(&dev->dev); From ea8c88f13d9fb1d6b39a05bfa07ae076ca1c6803 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 8 Aug 2012 09:07:39 +0800 Subject: [PATCH 0854/1098] PCI/PM: Keep parent bridge active when probing device This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134329923124234&w=2 The root cause of the bug is as follow. If a device is not bound with the corresponding driver, the device runtime PM will be disabled and the device will be put into suspended state. So that, the bridge/PCIe port connected to it may be put into suspended and low power state. When do probing for the device later, because the bridge/PCIe port connected to it is in low power state, the IO access to device may fail. To solve the issue, the bridge/PCIe port connected to the device is put into active state before probing. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki --- drivers/pci/pci-driver.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 5270f1a99328..d6fd6b6d9d4b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi) { struct drv_dev_and_id *ddi = _ddi; struct device *dev = &ddi->dev->dev; + struct device *parent = dev->parent; int rc; + /* The parent bridge must be in active state when probing */ + if (parent) + pm_runtime_get_sync(parent); /* Unbound PCI devices are always set to disabled and suspended. * During probe, the device is set to enabled and active and the * usage count is incremented. If the driver supports runtime PM, @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi) pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); } + if (parent) + pm_runtime_put(parent); return rc; } From 3d8387efe1ad9eb5bfe8a2e58cdbd1b88b247eef Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 15 Aug 2012 09:43:03 +0800 Subject: [PATCH 0855/1098] PCI/PM: Fix config reg access for D3cold and bridge suspending This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134338059022620&w=2 Where lspci does not work properly if a device and the corresponding parent bridge (such as PCIe port) is suspended. This is because the device configuration space registers will be not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. To solve the issue, the bridge/PCIe port connected to the device is put into active state before read/write configuration space registers. If the device is in D3cold state, it will be put into active state too. To avoid resume/suspend PCIe port for each configuration register read/write, a small delay is added before the PCIe port to go suspended. Reported-by: Bjorn Mork Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki --- drivers/pci/pci-sysfs.c | 42 ++++++++++++++++++++++++++++++++++ drivers/pci/pcie/portdrv_pci.c | 9 ++++++++ 2 files changed, 51 insertions(+) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6869009c7393..02d107b15281 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) } struct device_attribute vga_attr = __ATTR_RO(boot_vga); +static void +pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +static void +pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, size = count; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { u8 val; pci_user_read_config_byte(dev, off, &val); @@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } @@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, count = size; } + pci_config_pm_runtime_get(dev); + if ((off & 1) && size) { pci_user_write_config_byte(dev, off, data[off - init_off]); off++; @@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj, --size; } + pci_config_pm_runtime_put(dev); + return count; } diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 62f5a76c8f80..e76b44777dbf 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev) { return 0; } + +static int pcie_port_runtime_idle(struct device *dev) +{ + /* Delay for a short while to prevent too frequent suspend/resume */ + pm_schedule_suspend(dev, 10); + return -EBUSY; +} #else #define pcie_port_runtime_suspend NULL #define pcie_port_runtime_resume NULL +#define pcie_port_runtime_idle NULL #endif static const struct dev_pm_ops pcie_portdrv_pm_ops = { @@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .resume_noirq = pcie_port_resume_noirq, .runtime_suspend = pcie_port_runtime_suspend, .runtime_resume = pcie_port_runtime_resume, + .runtime_idle = pcie_port_runtime_idle, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) From 046c6531b60e8b9eabf47820a06161338a612167 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 8 Aug 2012 09:07:41 +0800 Subject: [PATCH 0856/1098] PCI/PM: Add ABI document for sysfs file d3cold_allowed This patch adds ABI document for the following sysfs file: /sys/bus/pci/devices/.../d3cold_allowed Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki --- Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 34f51100f029..dff1f48d252d 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit. From 61e01be22e954f53a4bbac8066015d9f4ab9e42d Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Tue, 21 Aug 2012 16:15:43 -0700 Subject: [PATCH 0857/1098] cs5535-clockevt: typo, it's MFGPT, not MFPGT Signed-off-by: Jens Rottmann Cc: Thomas Gleixner Cc: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/clocksource/cs5535-clockevt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 540795cd0760..d9279385304d 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -53,7 +53,7 @@ static struct cs5535_mfgpt_timer *cs5535_event_clock; #define MFGPT_PERIODIC (MFGPT_HZ / HZ) /* - * The MFPGT timers on the CS5536 provide us with suitable timers to use + * The MFGPT timers on the CS5536 provide us with suitable timers to use * as clock event sources - not as good as a HPET or APIC, but certainly * better than the PIT. This isn't a general purpose MFGPT driver, but * a simplified one designed specifically to act as a clock event source. @@ -144,7 +144,7 @@ static int __init cs5535_mfgpt_init(void) timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (!timer) { - printk(KERN_ERR DRV_NAME ": Could not allocate MFPGT timer\n"); + printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n"); return -ENODEV; } cs5535_event_clock = timer; From f9aed62a2b12a8e04077737c9942111e14ed738e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 21 Aug 2012 16:15:45 -0700 Subject: [PATCH 0858/1098] mm: change nr_ptes BUG_ON to WARN_ON Occasionally an isolated BUG_ON(mm->nr_ptes) gets reported, indicating that not all the page tables allocated could be found and freed when exit_mmap() tore down the user address space. There's usually nothing we can say about it, beyond that it's probably a sign of some bad memory or memory corruption; though it might still indicate a bug in vma or page table management (and did recently reveal a race in THP, fixed a few months ago). But one overdue change we can make is from BUG_ON to WARN_ON. It's fairly likely that the system will crash shortly afterwards in some other way (for example, the BUG_ON(page_mapped(page)) in __delete_from_page_cache(), once an inode mapped into the lost page tables gets evicted); but might tell us more before that. Change the BUG_ON(page_mapped) to WARN_ON too? Later perhaps: I'm less eager, since that one has several times led to fixes. Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index e3e86914f11a..9adee9fc0d8a 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2309,7 +2309,7 @@ void exit_mmap(struct mm_struct *mm) } vm_unacct_memory(nr_accounted); - BUG_ON(mm->nr_ptes > (FIRST_USER_ADDRESS+PMD_SIZE-1)>>PMD_SHIFT); + WARN_ON(mm->nr_ptes > (FIRST_USER_ADDRESS+PMD_SIZE-1)>>PMD_SHIFT); } /* Insert vm structure into process list sorted by address From d65226e2bfe9dd96f193d61892e20fcda9524d22 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 21 Aug 2012 16:15:46 -0700 Subject: [PATCH 0859/1098] Documentation: update mount option in filesystem/vfat.txt Update two mount options(discard, nfs) in vfat.txt. Signed-off-by: Namjae Jeon Acked-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/vfat.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index ead764b2728f..de1e6c4dccff 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -137,6 +137,17 @@ errors=panic|continue|remount-ro without doing anything or remount the partition in read-only mode (default behavior). +discard -- If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +nfs -- This option maintains an index (cache) of directory + inodes by i_logstart which is used by the nfs-related code to + improve look-ups. + + Enable this only if you want to export the FAT filesystem + over NFS + : 0,1,yes,no,true,false TODO From b0cf0b118c90477d1a6811f2cd2307f6a5578362 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 21 Aug 2012 16:15:49 -0700 Subject: [PATCH 0860/1098] cciss: fix incorrect scsi status reporting Delete code which sets SCSI status incorrectly as it's already been set correctly above this incorrect code. The bug was introduced in 2009 by commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be lost.") Signed-off-by: Stephen M. Cameron Reported-by: Roel van Meer Tested-by: Roel van Meer Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss_scsi.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index acda773b3720..38aa6dda6b81 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -763,16 +763,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, { case CMD_TARGET_STATUS: /* Pass it up to the upper layers... */ - if( ei->ScsiStatus) - { -#if 0 - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status = %x\n", - c, ei->ScsiStatus); -#endif - cmd->result |= (ei->ScsiStatus << 1); - } - else { /* scsi status is zero??? How??? */ + if (!ei->ScsiStatus) { /* Ordinarily, this case should never happen, but there is a bug in some released firmware revisions that allows it to happen From eb48c071464757414538c68a6033c8f8c15196f8 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 21 Aug 2012 16:15:52 -0700 Subject: [PATCH 0861/1098] mm: hugetlbfs: correctly populate shared pmd Each page mapped in a process's address space must be correctly accounted for in _mapcount. Normally the rules for this are straightforward but hugetlbfs page table sharing is different. The page table pages at the PMD level are reference counted while the mapcount remains the same. If this accounting is wrong, it causes bugs like this one reported by Larry Woodman: kernel BUG at mm/filemap.c:135! invalid opcode: 0000 [#1] SMP CPU 22 Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi] Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2 RIP: 0010:[] [] __delete_from_page_cache+0x15d/0x170 Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20) Call Trace: delete_from_page_cache+0x40/0x80 truncate_hugepages+0x115/0x1f0 hugetlbfs_evict_inode+0x18/0x30 evict+0x9f/0x1b0 iput_final+0xe3/0x1e0 iput+0x3e/0x50 d_kill+0xf8/0x110 dput+0xe2/0x1b0 __fput+0x162/0x240 During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc() shared page tables with the check dst_pte == src_pte. The logic is if the PMD page is the same, they must be shared. This assumes that the sharing is between the parent and child. However, if the sharing is with a different process entirely then this check fails as in this diagram: parent | ------------>pmd src_pte----------> data page ^ other--------->pmd--------------------| ^ child-----------| dst_pte For this situation to occur, it must be possible for Parent and Other to have faulted and failed to share page tables with each other. This is possible due to the following style of race. PROC A PROC B copy_hugetlb_page_range copy_hugetlb_page_range src_pte == huge_pte_offset src_pte == huge_pte_offset !src_pte so no sharing !src_pte so no sharing (time passes) hugetlb_fault hugetlb_fault huge_pte_alloc huge_pte_alloc huge_pmd_share huge_pmd_share LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) pmd_alloc pmd_alloc LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) These two processes are not poing to the same data page but are not sharing page tables because the opportunity was missed. When either process later forks, the src_pte == dst pte is potentially insufficient. As the check falls through, the wrong PTE information is copied in (harmless but wrong) and the mapcount is bumped for a page mapped by a shared page table leading to the BUG_ON. This patch addresses the issue by moving pmd_alloc into huge_pmd_share which guarantees that the shared pud is populated in the same critical section as pmd. This also means that huge_pte_offset test in huge_pmd_share is serialized correctly now which in turn means that the success of the sharing will be higher as the racing tasks see the pud and pmd populated together. Race identified and changelog written mostly by Mel Gorman. {akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style] Reported-by: Larry Woodman Tested-by: Larry Woodman Reviewed-by: Mel Gorman Signed-off-by: Michal Hocko Reviewed-by: Rik van Riel Cc: David Gibson Cc: Ken Chen Cc: Cong Wang Cc: Hillf Danton Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7fb8ca..b91e48512425 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); From ac8e97f8a742828daa1d9de37f6e635888f8d71e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 21 Aug 2012 16:15:53 -0700 Subject: [PATCH 0862/1098] checkpatch: add control statement test to SINGLE_STATEMENT_DO_WHILE_MACRO Commit b13edf7ff2dd ("checkpatch: add checks for do {} while (0) macro misuses") added a test that is overly simplistic for single statement macros. Macros that start with control tests should be enclosed in a do {} while (0) loop. Add the necessary control tests to the check. Signed-off-by: Joe Perches Acked-by: Andy Whitcroft Tested-by: Franz Schrober Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 913d6bdfdda3..ca05ba217f5f 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -3016,7 +3016,8 @@ sub process { $herectx .= raw_line($linenr, $n) . "\n"; } - if (($stmts =~ tr/;/;/) == 1) { + if (($stmts =~ tr/;/;/) == 1 && + $stmts !~ /^\s*(if|while|for|switch)\b/) { WARN("SINGLE_STATEMENT_DO_WHILE_MACRO", "Single statement macros should not use a do {} while (0) loop\n" . "$herectx"); } From d46f3d86fdc9248b4a8497a7da229812a15ba670 Mon Sep 17 00:00:00 2001 From: Zhouping Liu Date: Tue, 21 Aug 2012 16:15:57 -0700 Subject: [PATCH 0863/1098] hugetlb: update hugetlbpage.txt Commit f0f57b2b1488 ("mm: move hugepage test examples to tools/testing/selftests/vm") moved map_hugetlb.c, hugepage-shm.c and hugepage-mmap.c tests into tools/testing/selftests/vm/ directory, but it didn't update hugetlbpage.txt Signed-off-by: Zhouping Liu Acked-by: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/hugetlbpage.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f8551b3879f8..4ac359b7aa17 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -299,11 +299,17 @@ map_hugetlb.c. ******************************************************************* /* - * hugepage-shm: see Documentation/vm/hugepage-shm.c + * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c */ ******************************************************************* /* - * hugepage-mmap: see Documentation/vm/hugepage-mmap.c + * hugepage-shm: see tools/testing/selftests/vm/hugepage-shm.c + */ + +******************************************************************* + +/* + * hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c */ From c3a5ce0416b6c172a23bc8a3760d8704d3d1535b Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 21 Aug 2012 16:16:00 -0700 Subject: [PATCH 0864/1098] string: do not export memweight() to userspace Fix the following warning: usr/include/linux/string.h:8: userspace cannot reference function or variable defined in the kernel Signed-off-by: WANG Cong Acked-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/string.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/string.h b/include/linux/string.h index ffe0442e18d2..b9178812d9df 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -144,8 +144,8 @@ static inline bool strstarts(const char *str, const char *prefix) { return strncmp(str, prefix, strlen(prefix)) == 0; } -#endif extern size_t memweight(const void *ptr, size_t bytes); +#endif /* __KERNEL__ */ #endif /* _LINUX_STRING_H_ */ From 7838f994b4fceff24c343f4e26a6cf4393869579 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Tue, 21 Aug 2012 16:16:02 -0700 Subject: [PATCH 0865/1098] drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources On many of our larger systems, CPU 0 has had all of its IRQ resources consumed before XPC loads. Worst cases on machines with multiple 10 GigE cards and multiple IB cards have depleted the entire first socket of IRQs. This patch makes selecting the node upon which IRQs are allocated (as well as all the other GRU Message Queue structures) specifiable as a module load param and has a default behavior of searching all nodes/cpus for an available resources. [akpm@linux-foundation.org: fix build: include cpu.h and module.h] Signed-off-by: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_uv.c | 84 ++++++++++++++++++++++++++++-------- 1 file changed, 65 insertions(+), 19 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 87b251ab6ec5..b9e2000969f0 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -59,6 +61,8 @@ static struct xpc_heartbeat_uv *xpc_heartbeat_uv; XPC_NOTIFY_MSG_SIZE_UV) #define XPC_NOTIFY_IRQ_NAME "xpc_notify" +static int xpc_mq_node = -1; + static struct xpc_gru_mq_uv *xpc_activate_mq_uv; static struct xpc_gru_mq_uv *xpc_notify_mq_uv; @@ -109,11 +113,8 @@ xpc_get_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq, int cpu, char *irq_name) #if defined CONFIG_X86_64 mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset, UV_AFFINITY_CPU); - if (mq->irq < 0) { - dev_err(xpc_part, "uv_setup_irq() returned error=%d\n", - -mq->irq); + if (mq->irq < 0) return mq->irq; - } mq->mmr_value = uv_read_global_mmr64(mmr_pnode, mq->mmr_offset); @@ -238,8 +239,9 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, mq->mmr_blade = uv_cpu_to_blade_id(cpu); nid = cpu_to_node(cpu); - page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, - pg_order); + page = alloc_pages_exact_node(nid, + GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); @@ -1731,9 +1733,50 @@ static struct xpc_arch_operations xpc_arch_ops_uv = { .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv, }; +static int +xpc_init_mq_node(int nid) +{ + int cpu; + + get_online_cpus(); + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_activate_mq_uv = + xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, nid, + XPC_ACTIVATE_IRQ_NAME, + xpc_handle_activate_IRQ_uv); + if (!IS_ERR(xpc_activate_mq_uv)) + break; + } + if (IS_ERR(xpc_activate_mq_uv)) { + put_online_cpus(); + return PTR_ERR(xpc_activate_mq_uv); + } + + for_each_cpu(cpu, cpumask_of_node(nid)) { + xpc_notify_mq_uv = + xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, nid, + XPC_NOTIFY_IRQ_NAME, + xpc_handle_notify_IRQ_uv); + if (!IS_ERR(xpc_notify_mq_uv)) + break; + } + if (IS_ERR(xpc_notify_mq_uv)) { + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); + put_online_cpus(); + return PTR_ERR(xpc_notify_mq_uv); + } + + put_online_cpus(); + return 0; +} + int xpc_init_uv(void) { + int nid; + int ret = 0; + xpc_arch_ops = xpc_arch_ops_uv; if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { @@ -1742,21 +1785,21 @@ xpc_init_uv(void) return -E2BIG; } - xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, - XPC_ACTIVATE_IRQ_NAME, - xpc_handle_activate_IRQ_uv); - if (IS_ERR(xpc_activate_mq_uv)) - return PTR_ERR(xpc_activate_mq_uv); + if (xpc_mq_node < 0) + for_each_online_node(nid) { + ret = xpc_init_mq_node(nid); - xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, - XPC_NOTIFY_IRQ_NAME, - xpc_handle_notify_IRQ_uv); - if (IS_ERR(xpc_notify_mq_uv)) { - xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); - return PTR_ERR(xpc_notify_mq_uv); - } + if (!ret) + break; + } + else + ret = xpc_init_mq_node(xpc_mq_node); - return 0; + if (ret < 0) + dev_err(xpc_part, "xpc_init_mq_node() returned error=%d\n", + -ret); + + return ret; } void @@ -1765,3 +1808,6 @@ xpc_exit_uv(void) xpc_destroy_gru_mq_uv(xpc_notify_mq_uv); xpc_destroy_gru_mq_uv(xpc_activate_mq_uv); } + +module_param(xpc_mq_node, int, 0); +MODULE_PARM_DESC(xpc_mq_node, "Node number on which to allocate message queues."); From c81758fbe0fdbbc0c74b37798f55bd9c91d5c068 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 21 Aug 2012 16:16:03 -0700 Subject: [PATCH 0866/1098] mm/compaction.c: fix deferring compaction mistake Commit aff622495c9a ("vmscan: only defer compaction for failed order and higher") fixed bad deferring policy but made mistake about checking compact_order_failed in __compact_pgdat(). So it can't update compact_order_failed with the new order. This ends up preventing correct operation of policy deferral. This patch fixes it. Signed-off-by: Minchan Kim Reviewed-by: Rik van Riel Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/compaction.c b/mm/compaction.c index e78cb9688421..b6984e234fdf 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -861,7 +861,7 @@ static int __compact_pgdat(pg_data_t *pgdat, struct compact_control *cc) if (cc->order > 0) { int ok = zone_watermark_ok(zone, cc->order, low_wmark_pages(zone), 0, 0); - if (ok && cc->order > zone->compact_order_failed) + if (ok && cc->order >= zone->compact_order_failed) zone->compact_order_failed = cc->order + 1; /* Currently async compaction is never deferred. */ else if (!ok && cc->sync) From 5ed12f12825c6c0451d703bfe918a7fc190e2738 Mon Sep 17 00:00:00 2001 From: Ilya Shchepetkov Date: Tue, 21 Aug 2012 16:16:06 -0700 Subject: [PATCH 0867/1098] drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes Dynamically allocated sysfs attributes must be initialized using sysfs_attr_init(), otherwise lockdep complains: BUG: key
not in .data! Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Ilya Shchepetkov Cc: Chris Verges Cc: Christian Pellegrin Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf2123.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c index 836118795c0b..13e4df63974f 100644 --- a/drivers/rtc/rtc-pcf2123.c +++ b/drivers/rtc/rtc-pcf2123.c @@ -43,6 +43,7 @@ #include #include #include +#include #define DRV_VERSION "0.6" @@ -292,6 +293,7 @@ static int __devinit pcf2123_probe(struct spi_device *spi) pdata->rtc = rtc; for (i = 0; i < 16; i++) { + sysfs_attr_init(&pdata->regs[i].attr.attr); sprintf(pdata->regs[i].name, "%1x", i); pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR; pdata->regs[i].attr.attr.name = pdata->regs[i].name; From b121186ab1b12e2a96a945d88eae0735b4542158 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Tue, 21 Aug 2012 16:16:08 -0700 Subject: [PATCH 0868/1098] mm: correct page->pfmemalloc to fix deactivate_slab regression Commit cfd19c5a9ecf ("mm: only set page->pfmemalloc when ALLOC_NO_WATERMARKS was used") tried to narrow down page->pfmemalloc setting, but it missed some places the pfmemalloc should be set. So, in __slab_alloc, the unalignment pfmemalloc and ALLOC_NO_WATERMARKS cause incorrect deactivate_slab() on our core2 server: 64.73% fio [kernel.kallsyms] [k] _raw_spin_lock | --- _raw_spin_lock | |---0.34%-- deactivate_slab | __slab_alloc | kmem_cache_alloc | | That causes our fio sync write performance to have a 40% regression. Move the checking in get_page_from_freelist() which resolves this issue. Signed-off-by: Alex Shi Acked-by: Mel Gorman Cc: David Miller Tested-by: Eric Dumazet Tested-by: Sage Weil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 009ac285fea7..07f19248acb5 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1928,6 +1928,17 @@ this_zone_full: zlc_active = 0; goto zonelist_scan; } + + if (page) + /* + * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was + * necessary to allocate the page. The expectation is + * that the caller is taking steps that will free more + * memory. The caller should avoid the page being used + * for !PFMEMALLOC purposes. + */ + page->pfmemalloc = !!(alloc_flags & ALLOC_NO_WATERMARKS); + return page; } @@ -2389,14 +2400,6 @@ rebalance: zonelist, high_zoneidx, nodemask, preferred_zone, migratetype); if (page) { - /* - * page->pfmemalloc is set when ALLOC_NO_WATERMARKS was - * necessary to allocate the page. The expectation is - * that the caller is taking steps that will free more - * memory. The caller should avoid the page being used - * for !PFMEMALLOC purposes. - */ - page->pfmemalloc = true; goto got_pg; } } @@ -2569,8 +2572,6 @@ retry_cpuset: page = __alloc_pages_slowpath(gfp_mask, order, zonelist, high_zoneidx, nodemask, preferred_zone, migratetype); - else - page->pfmemalloc = false; trace_mm_page_alloc(page, order, gfp_mask, migratetype); From 7dbfb315b2aaef0a115765946bf3026d074c33a7 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 21 Aug 2012 16:16:10 -0700 Subject: [PATCH 0869/1098] drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode Correct the offset by subtracting 20 from tm_hour before taking the modulo 12. [ "Why 20?" I hear you ask. Or at least I did. Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly - included in the RS5C348_HOURS_MASK define. So it's really subtracting out that bit to get "hour+12". But then because it does things modulo 12, it needs to add the 12 in again afterwards anyway. This code is confused. It would be much clearer if RS5C348_HOURS_MASK just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't need to do the silly subtract either. Whatever. It's all just math, the end result is the same. - Linus ] Reported-by: James Nute Tested-by: James Nute Signed-off-by: Atsushi Nemoto Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-rs5c348.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-rs5c348.c b/drivers/rtc/rtc-rs5c348.c index 77074ccd2850..fd5c7af04ae5 100644 --- a/drivers/rtc/rtc-rs5c348.c +++ b/drivers/rtc/rtc-rs5c348.c @@ -122,9 +122,12 @@ rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK); tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK); if (!pdata->rtc_24h) { - tm->tm_hour %= 12; - if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) + if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) { + tm->tm_hour -= 20; + tm->tm_hour %= 12; tm->tm_hour += 12; + } else + tm->tm_hour %= 12; } tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK); tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK); From 3670e7e12e582c6d67761275d148171feb7a9004 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 21 Aug 2012 16:16:11 -0700 Subject: [PATCH 0870/1098] rapidio/tsi721: fix inbound doorbell interrupt handling Make sure that there is no doorbell messages left behind due to disabled interrupts during inbound doorbell processing. The most common case for this bug is loss of rionet JOIN messages in systems with three or more rionet participants and MSI or MSI-X enabled. As result, requests for packet transfers may finish with "destination unreachable" error message. This patch is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 722246cf20ab..c0d6a049cbd6 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -435,6 +435,9 @@ static void tsi721_db_dpc(struct work_struct *work) " info %4.4x\n", DBELL_SID(idb.bytes), DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); } + + wr_ptr = ioread32(priv->regs + + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; } iowrite32(rd_ptr & (IDB_QSIZE - 1), @@ -445,6 +448,10 @@ static void tsi721_db_dpc(struct work_struct *work) regval |= TSI721_SR_CHINT_IDBQRCV; iowrite32(regval, priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE; + if (wr_ptr != rd_ptr) + schedule_work(&priv->idb_work); } /** From 9a9a9a7adafe62a34de8b4fb48936c1c5f9bafa5 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Tue, 21 Aug 2012 16:16:12 -0700 Subject: [PATCH 0871/1098] rapidio/tsi721: fix unused variable compiler warning Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG option off. This patch is applicable to kernel versions starting from v3.2 Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index c0d6a049cbd6..5d44252b7342 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2219,7 +2219,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i, cap; + int cap; int err; u32 regval; @@ -2239,12 +2239,15 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, priv->pdev = pdev; #ifdef DEBUG + { + int i; for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n", i, (unsigned long long)pci_resource_start(pdev, i), (unsigned long)pci_resource_len(pdev, i), pci_resource_flags(pdev, i)); } + } #endif /* * Verify BAR configuration From de74f1cc3b1e9730d9b58580cd11361d30cd182d Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 21 Aug 2012 16:16:15 -0700 Subject: [PATCH 0872/1098] mm: have order > 0 compaction start near a pageblock with free pages Commit 7db8889ab05b ("mm: have order > 0 compaction start off where it left") introduced a caching mechanism to reduce the amount work the free page scanner does in compaction. However, it has a problem. Consider two process simultaneously scanning free pages C Process A M S F |---------------------------------------| Process B M FS C is zone->compact_cached_free_pfn S is cc->start_pfree_pfn M is cc->migrate_pfn F is cc->free_pfn In this diagram, Process A has just reached its migrate scanner, wrapped around and updated compact_cached_free_pfn accordingly. Simultaneously, Process B finishes isolating in a block and updates compact_cached_free_pfn again to the location of its free scanner. Process A moves to "end_of_zone - one_pageblock" and runs this check if (cc->order > 0 && (!cc->wrapped || zone->compact_cached_free_pfn > cc->start_free_pfn)) pfn = min(pfn, zone->compact_cached_free_pfn); compact_cached_free_pfn is above where it started so the free scanner skips almost the entire space it should have scanned. When there are multiple processes compacting it can end in a situation where the entire zone is not being scanned at all. Further, it is possible for two processes to ping-pong update to compact_cached_free_pfn which is just random. Overall, the end result wrecks allocation success rates. There is not an obvious way around this problem without introducing new locking and state so this patch takes a different approach. First, it gets rid of the skip logic because it's not clear that it matters if two free scanners happen to be in the same block but with racing updates it's too easy for it to skip over blocks it should not. Second, it updates compact_cached_free_pfn in a more limited set of circumstances. If a scanner has wrapped, it updates compact_cached_free_pfn to the end of the zone. When a wrapped scanner isolates a page, it updates compact_cached_free_pfn to point to the highest pageblock it can isolate pages from. If a scanner has not wrapped when it has finished isolated pages it checks if compact_cached_free_pfn is pointing to the end of the zone. If so, the value is updated to point to the highest pageblock that pages were isolated from. This value will not be updated again until a free page scanner wraps and resets compact_cached_free_pfn. This is not optimal and it can still race but the compact_cached_free_pfn will be pointing to or very near a pageblock with free pages. Signed-off-by: Mel Gorman Reviewed-by: Rik van Riel Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 54 +++++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 26 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index b6984e234fdf..bcce7897e17a 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -383,6 +383,20 @@ static bool suitable_migration_target(struct page *page) return false; } +/* + * Returns the start pfn of the last page block in a zone. This is the starting + * point for full compaction of a zone. Compaction searches for free pages from + * the end of each zone, while isolate_freepages_block scans forward inside each + * page block. + */ +static unsigned long start_free_pfn(struct zone *zone) +{ + unsigned long free_pfn; + free_pfn = zone->zone_start_pfn + zone->spanned_pages; + free_pfn &= ~(pageblock_nr_pages-1); + return free_pfn; +} + /* * Based on information in the current compact_control, find blocks * suitable for isolating free pages from and then isolate them. @@ -422,17 +436,6 @@ static void isolate_freepages(struct zone *zone, pfn -= pageblock_nr_pages) { unsigned long isolated; - /* - * Skip ahead if another thread is compacting in the area - * simultaneously. If we wrapped around, we can only skip - * ahead if zone->compact_cached_free_pfn also wrapped to - * above our starting point. - */ - if (cc->order > 0 && (!cc->wrapped || - zone->compact_cached_free_pfn > - cc->start_free_pfn)) - pfn = min(pfn, zone->compact_cached_free_pfn); - if (!pfn_valid(pfn)) continue; @@ -474,7 +477,15 @@ static void isolate_freepages(struct zone *zone, */ if (isolated) { high_pfn = max(high_pfn, pfn); - if (cc->order > 0) + + /* + * If the free scanner has wrapped, update + * compact_cached_free_pfn to point to the highest + * pageblock with free pages. This reduces excessive + * scanning of full pageblocks near the end of the + * zone + */ + if (cc->order > 0 && cc->wrapped) zone->compact_cached_free_pfn = high_pfn; } } @@ -484,6 +495,11 @@ static void isolate_freepages(struct zone *zone, cc->free_pfn = high_pfn; cc->nr_freepages = nr_freepages; + + /* If compact_cached_free_pfn is reset then set it now */ + if (cc->order > 0 && !cc->wrapped && + zone->compact_cached_free_pfn == start_free_pfn(zone)) + zone->compact_cached_free_pfn = high_pfn; } /* @@ -570,20 +586,6 @@ static isolate_migrate_t isolate_migratepages(struct zone *zone, return ISOLATE_SUCCESS; } -/* - * Returns the start pfn of the last page block in a zone. This is the starting - * point for full compaction of a zone. Compaction searches for free pages from - * the end of each zone, while isolate_freepages_block scans forward inside each - * page block. - */ -static unsigned long start_free_pfn(struct zone *zone) -{ - unsigned long free_pfn; - free_pfn = zone->zone_start_pfn + zone->spanned_pages; - free_pfn &= ~(pageblock_nr_pages-1); - return free_pfn; -} - static int compact_finished(struct zone *zone, struct compact_control *cc) { From c67fe3752abe6ab47639e2f9b836900c3dc3da84 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 21 Aug 2012 16:16:17 -0700 Subject: [PATCH 0873/1098] mm: compaction: Abort async compaction if locks are contended or taking too long Jim Schutt reported a problem that pointed at compaction contending heavily on locks. The workload is straight-forward and in his own words; The systems in question have 24 SAS drives spread across 3 HBAs, running 24 Ceph OSD instances, one per drive. FWIW these servers are dual-socket Intel 5675 Xeons w/48 GB memory. I've got ~160 Ceph Linux clients doing dd simultaneously to a Ceph file system backed by 12 of these servers. Early in the test everything looks fine procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu------- r b swpd free buff cache si so bi bo in cs us sy id wa st 31 15 0 287216 576 38606628 0 0 2 1158 2 14 1 3 95 0 0 27 15 0 225288 576 38583384 0 0 18 2222016 203357 134876 11 56 17 15 0 28 17 0 219256 576 38544736 0 0 11 2305932 203141 146296 11 49 23 17 0 6 18 0 215596 576 38552872 0 0 7 2363207 215264 166502 12 45 22 20 0 22 18 0 226984 576 38596404 0 0 3 2445741 223114 179527 12 43 23 22 0 and then it goes to pot procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu------- r b swpd free buff cache si so bi bo in cs us sy id wa st 163 8 0 464308 576 36791368 0 0 11 22210 866 536 3 13 79 4 0 207 14 0 917752 576 36181928 0 0 712 1345376 134598 47367 7 90 1 2 0 123 12 0 685516 576 36296148 0 0 429 1386615 158494 60077 8 84 5 3 0 123 12 0 598572 576 36333728 0 0 1107 1233281 147542 62351 7 84 5 4 0 622 7 0 660768 576 36118264 0 0 557 1345548 151394 59353 7 85 4 3 0 223 11 0 283960 576 36463868 0 0 46 1107160 121846 33006 6 93 1 1 0 Note that system CPU usage is very high blocks being written out has dropped by 42%. He analysed this with perf and found perf record -g -a sleep 10 perf report --sort symbol --call-graph fractal,5 34.63% [k] _raw_spin_lock_irqsave | |--97.30%-- isolate_freepages | compaction_alloc | unmap_and_move | migrate_pages | compact_zone | compact_zone_order | try_to_compact_pages | __alloc_pages_direct_compact | __alloc_pages_slowpath | __alloc_pages_nodemask | alloc_pages_vma | do_huge_pmd_anonymous_page | handle_mm_fault | do_page_fault | page_fault | | | |--87.39%-- skb_copy_datagram_iovec | | tcp_recvmsg | | inet_recvmsg | | sock_recvmsg | | sys_recvfrom | | system_call | | __recv | | | | | --100.00%-- (nil) | | | --12.61%-- memcpy --2.70%-- [...] There was other data but primarily it is all showing that compaction is contended heavily on the zone->lock and zone->lru_lock. commit [b2eef8c0: mm: compaction: minimise the time IRQs are disabled while isolating pages for migration] noted that it was possible for migration to hold the lru_lock for an excessive amount of time. Very broadly speaking this patch expands the concept. This patch introduces compact_checklock_irqsave() to check if a lock is contended or the process needs to be scheduled. If either condition is true then async compaction is aborted and the caller is informed. The page allocator will fail a THP allocation if compaction failed due to contention. This patch also introduces compact_trylock_irqsave() which will acquire the lock only if it is not contended and the process does not need to schedule. Reported-by: Jim Schutt Tested-by: Jim Schutt Signed-off-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/compaction.h | 4 +- mm/compaction.c | 100 +++++++++++++++++++++++++++++-------- mm/internal.h | 1 + mm/page_alloc.c | 17 ++++--- 4 files changed, 93 insertions(+), 29 deletions(-) diff --git a/include/linux/compaction.h b/include/linux/compaction.h index 133ddcf83397..ef658147e4e8 100644 --- a/include/linux/compaction.h +++ b/include/linux/compaction.h @@ -22,7 +22,7 @@ extern int sysctl_extfrag_handler(struct ctl_table *table, int write, extern int fragmentation_index(struct zone *zone, unsigned int order); extern unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask, - bool sync); + bool sync, bool *contended); extern int compact_pgdat(pg_data_t *pgdat, int order); extern unsigned long compaction_suitable(struct zone *zone, int order); @@ -64,7 +64,7 @@ static inline bool compaction_deferred(struct zone *zone, int order) #else static inline unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync) + bool sync, bool *contended) { return COMPACT_CONTINUE; } diff --git a/mm/compaction.c b/mm/compaction.c index bcce7897e17a..7fcd3a52e68d 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -50,6 +50,47 @@ static inline bool migrate_async_suitable(int migratetype) return is_migrate_cma(migratetype) || migratetype == MIGRATE_MOVABLE; } +/* + * Compaction requires the taking of some coarse locks that are potentially + * very heavily contended. Check if the process needs to be scheduled or + * if the lock is contended. For async compaction, back out in the event + * if contention is severe. For sync compaction, schedule. + * + * Returns true if the lock is held. + * Returns false if the lock is released and compaction should abort + */ +static bool compact_checklock_irqsave(spinlock_t *lock, unsigned long *flags, + bool locked, struct compact_control *cc) +{ + if (need_resched() || spin_is_contended(lock)) { + if (locked) { + spin_unlock_irqrestore(lock, *flags); + locked = false; + } + + /* async aborts if taking too long or contended */ + if (!cc->sync) { + if (cc->contended) + *cc->contended = true; + return false; + } + + cond_resched(); + if (fatal_signal_pending(current)) + return false; + } + + if (!locked) + spin_lock_irqsave(lock, *flags); + return true; +} + +static inline bool compact_trylock_irqsave(spinlock_t *lock, + unsigned long *flags, struct compact_control *cc) +{ + return compact_checklock_irqsave(lock, flags, false, cc); +} + /* * Isolate free pages onto a private freelist. Caller must hold zone->lock. * If @strict is true, will abort returning 0 on any invalid PFNs or non-free @@ -173,7 +214,7 @@ isolate_freepages_range(unsigned long start_pfn, unsigned long end_pfn) } /* Update the number of anon and file isolated pages in the zone */ -static void acct_isolated(struct zone *zone, struct compact_control *cc) +static void acct_isolated(struct zone *zone, bool locked, struct compact_control *cc) { struct page *page; unsigned int count[2] = { 0, }; @@ -181,8 +222,14 @@ static void acct_isolated(struct zone *zone, struct compact_control *cc) list_for_each_entry(page, &cc->migratepages, lru) count[!!page_is_file_cache(page)]++; - __mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); - __mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + /* If locked we can use the interrupt unsafe versions */ + if (locked) { + __mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); + __mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + } else { + mod_zone_page_state(zone, NR_ISOLATED_ANON, count[0]); + mod_zone_page_state(zone, NR_ISOLATED_FILE, count[1]); + } } /* Similar to reclaim, but different enough that they don't share logic */ @@ -228,6 +275,8 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, struct list_head *migratelist = &cc->migratepages; isolate_mode_t mode = 0; struct lruvec *lruvec; + unsigned long flags; + bool locked; /* * Ensure that there are not too many pages isolated from the LRU @@ -247,25 +296,22 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, /* Time to isolate some pages for migration */ cond_resched(); - spin_lock_irq(&zone->lru_lock); + spin_lock_irqsave(&zone->lru_lock, flags); + locked = true; for (; low_pfn < end_pfn; low_pfn++) { struct page *page; - bool locked = true; /* give a chance to irqs before checking need_resched() */ if (!((low_pfn+1) % SWAP_CLUSTER_MAX)) { - spin_unlock_irq(&zone->lru_lock); + spin_unlock_irqrestore(&zone->lru_lock, flags); locked = false; } - if (need_resched() || spin_is_contended(&zone->lru_lock)) { - if (locked) - spin_unlock_irq(&zone->lru_lock); - cond_resched(); - spin_lock_irq(&zone->lru_lock); - if (fatal_signal_pending(current)) - break; - } else if (!locked) - spin_lock_irq(&zone->lru_lock); + + /* Check if it is ok to still hold the lock */ + locked = compact_checklock_irqsave(&zone->lru_lock, &flags, + locked, cc); + if (!locked) + break; /* * migrate_pfn does not necessarily start aligned to a @@ -349,9 +395,10 @@ isolate_migratepages_range(struct zone *zone, struct compact_control *cc, } } - acct_isolated(zone, cc); + acct_isolated(zone, locked, cc); - spin_unlock_irq(&zone->lru_lock); + if (locked) + spin_unlock_irqrestore(&zone->lru_lock, flags); trace_mm_compaction_isolate_migratepages(nr_scanned, nr_isolated); @@ -461,7 +508,16 @@ static void isolate_freepages(struct zone *zone, * are disabled */ isolated = 0; - spin_lock_irqsave(&zone->lock, flags); + + /* + * The zone lock must be held to isolate freepages. This + * unfortunately this is a very coarse lock and can be + * heavily contended if there are parallel allocations + * or parallel compactions. For async compaction do not + * spin on the lock + */ + if (!compact_trylock_irqsave(&zone->lock, &flags, cc)) + break; if (suitable_migration_target(page)) { end_pfn = min(pfn + pageblock_nr_pages, zone_end_pfn); isolated = isolate_freepages_block(pfn, end_pfn, @@ -773,7 +829,7 @@ out: static unsigned long compact_zone_order(struct zone *zone, int order, gfp_t gfp_mask, - bool sync) + bool sync, bool *contended) { struct compact_control cc = { .nr_freepages = 0, @@ -782,6 +838,7 @@ static unsigned long compact_zone_order(struct zone *zone, .migratetype = allocflags_to_migratetype(gfp_mask), .zone = zone, .sync = sync, + .contended = contended, }; INIT_LIST_HEAD(&cc.freepages); INIT_LIST_HEAD(&cc.migratepages); @@ -803,7 +860,7 @@ int sysctl_extfrag_threshold = 500; */ unsigned long try_to_compact_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *nodemask, - bool sync) + bool sync, bool *contended) { enum zone_type high_zoneidx = gfp_zone(gfp_mask); int may_enter_fs = gfp_mask & __GFP_FS; @@ -827,7 +884,8 @@ unsigned long try_to_compact_pages(struct zonelist *zonelist, nodemask) { int status; - status = compact_zone_order(zone, order, gfp_mask, sync); + status = compact_zone_order(zone, order, gfp_mask, sync, + contended); rc = max(status, rc); /* If a normal allocation would succeed, stop compacting */ diff --git a/mm/internal.h b/mm/internal.h index 3314f79d775a..b8c91b342e24 100644 --- a/mm/internal.h +++ b/mm/internal.h @@ -130,6 +130,7 @@ struct compact_control { int order; /* order a direct compactor needs */ int migratetype; /* MOVABLE, RECLAIMABLE etc */ struct zone *zone; + bool *contended; /* True if a lock was contended */ }; unsigned long diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 07f19248acb5..c66fb875104a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2102,7 +2102,7 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone, int migratetype, bool sync_migration, - bool *deferred_compaction, + bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { struct page *page; @@ -2117,7 +2117,8 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, current->flags |= PF_MEMALLOC; *did_some_progress = try_to_compact_pages(zonelist, order, gfp_mask, - nodemask, sync_migration); + nodemask, sync_migration, + contended_compaction); current->flags &= ~PF_MEMALLOC; if (*did_some_progress != COMPACT_SKIPPED) { @@ -2163,7 +2164,7 @@ __alloc_pages_direct_compact(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, nodemask_t *nodemask, int alloc_flags, struct zone *preferred_zone, int migratetype, bool sync_migration, - bool *deferred_compaction, + bool *contended_compaction, bool *deferred_compaction, unsigned long *did_some_progress) { return NULL; @@ -2336,6 +2337,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, unsigned long did_some_progress; bool sync_migration = false; bool deferred_compaction = false; + bool contended_compaction = false; /* * In the slowpath, we sanity check order to avoid ever trying to @@ -2425,6 +2427,7 @@ rebalance: nodemask, alloc_flags, preferred_zone, migratetype, sync_migration, + &contended_compaction, &deferred_compaction, &did_some_progress); if (page) @@ -2434,10 +2437,11 @@ rebalance: /* * If compaction is deferred for high-order allocations, it is because * sync compaction recently failed. In this is the case and the caller - * has requested the system not be heavily disrupted, fail the - * allocation now instead of entering direct reclaim + * requested a movable allocation that does not heavily disrupt the + * system then fail the allocation instead of entering direct reclaim. */ - if (deferred_compaction && (gfp_mask & __GFP_NO_KSWAPD)) + if ((deferred_compaction || contended_compaction) && + (gfp_mask & __GFP_NO_KSWAPD)) goto nopage; /* Try direct reclaim and then allocating */ @@ -2508,6 +2512,7 @@ rebalance: nodemask, alloc_flags, preferred_zone, migratetype, sync_migration, + &contended_compaction, &deferred_compaction, &did_some_progress); if (page) From d8636a2717bb3da2a7ce2154bf08de90bb8c87b0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 21 Aug 2012 16:29:47 +1000 Subject: [PATCH 0874/1098] fbcon: fix race condition between console lock and cursor timer (v1.1) So we've had a fair few reports of fbcon handover breakage between efi/vesafb and i915 surface recently, so I dedicated a couple of days to finding the problem. Essentially the last thing we saw was the conflicting framebuffer message and that was all. So after much tracing with direct netconsole writes (printks under console_lock not so useful), I think I found the race. Thread A (driver load) Thread B (timer thread) unbind_con_driver -> | bind_con_driver -> | vc->vc_sw->con_deinit -> | fbcon_deinit -> | console_lock() | | | | fbcon_flashcursor timer fires | console_lock() <- blocked for A | | fbcon_del_cursor_timer -> del_timer_sync (BOOM) Of course because all of this is under the console lock, we never see anything, also since we also just unbound the active console guess what we never see anything. Hopefully this fixes the problem for anyone seeing vesafb->kms driver handoff. v1.1: add comment suggestion from Alan. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/video/console/fbcon.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 2e471c22abf5..88e92041d8f0 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -372,8 +372,15 @@ static void fb_flashcursor(struct work_struct *work) struct vc_data *vc = NULL; int c; int mode; + int ret; + + /* FIXME: we should sort out the unbind locking instead */ + /* instead we just fail to flash the cursor if we can't get + * the lock instead of blocking fbcon deinit */ + ret = console_trylock(); + if (ret == 0) + return; - console_lock(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; From a1d0fa776870aeda5eb91b131d0f1aede6d94ef1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 21 Aug 2012 22:01:45 -0700 Subject: [PATCH 0875/1098] Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS This fixes the following breakage: edt-ft5x06.c: In function edt_ft5x06_ts_remove: edt-ft5x06.c:846:14: error: struct edt_ft5x06_ts_data has no member named raw_buffer Signed-off-by: Guenter Roeck Acked-by: Simon Budig Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 9afc777a40a7..b06a5e3a665e 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -602,6 +602,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) { if (tsdata->debug_dir) debugfs_remove_recursive(tsdata->debug_dir); + kfree(tsdata->raw_buffer); } #else @@ -843,7 +844,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client) if (gpio_is_valid(pdata->reset_pin)) gpio_free(pdata->reset_pin); - kfree(tsdata->raw_buffer); kfree(tsdata); return 0; From f35dd69ba341bda3790713b9e964483934b995e1 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Tue, 21 Aug 2012 21:57:15 -0700 Subject: [PATCH 0876/1098] Input: imx_keypad - reset the hardware before enabling Ensure the hardware is correctly initialized before requesting the interrupt, otherwise if a key was already touched since power-on the kernel enters an interrupt loop. To fix this issue we clear pending interrupt sources. We also have to make sure clk is enabled while changing the keypad registers. Signed-off-by: Michael Grzeschik Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/imx_keypad.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ff4c0a87a25f..ce68e361558c 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad) /* Inhibit KDI and KRI interrupts. */ reg_val = readw(keypad->mmio_base + KPSR); reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; writew(reg_val, keypad->mmio_base + KPSR); /* Colums as open drain and disable all rows */ @@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ + clk_enable(keypad->clk); imx_keypad_inhibit(keypad); + clk_disable(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); From 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 21 Aug 2012 21:57:15 -0700 Subject: [PATCH 0877/1098] Input: i8042 - add Gigabyte T1005 series netbooks to noloop table They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620 Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ec774d6c82b..6918773ce024 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -176,6 +176,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"), }, }, + { + /* Gigabyte T1005 - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005"), + }, + }, + { + /* Gigabyte T1005M/P - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"), + }, + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), From 6f4d0382e2a6d27045e223d8c452659477826650 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 21 Aug 2012 22:11:59 -0700 Subject: [PATCH 0878/1098] Input: wacom - add support for EMR on Cintiq 24HD touch Adds support for the EMR digitizer on the Cintiq 24HD touch. The EMR digitizer should work identically to that found on the Cintiq 24HD. The touch digitizer is a separate USB device similar to how we split apart some other devices. Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 002041975de9..532d067a9e07 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A = { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047, 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF4 = - { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xF8 = + { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, @@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xEF) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, + { USB_DEVICE_WACOM(0xF8) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_LENOVO(0x6004) }, { } From 27f011243a6e4e8b81078df1d83608dae31e3d38 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 20 Aug 2012 11:28:25 -0700 Subject: [PATCH 0879/1098] mac80211: fix DS to MBSS address translation The destination address of unicast frames forwarded through a mesh gate was being replaced with the broadcast address. Instead leave the original destination address as the mesh DA. If the nexthop address is not in the mpath table it will be resolved. If that fails, the frame will be forwarded to known mesh gates. Reported-by: Cedric Voncken Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 38 ++++++++++++++++---------------------- 1 file changed, 16 insertions(+), 22 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index acf712ffb5e6..c5e8c9c31f76 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1811,37 +1811,31 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, NULL, NULL); } else { - int is_mesh_mcast = 1; - const u8 *mesh_da; + /* DS -> MBSS (802.11-2012 13.11.3.3). + * For unicast with unknown forwarding information, + * destination might be in the MBSS or if that fails + * forwarded to another mesh gate. In either case + * resolution will be handled in ieee80211_xmit(), so + * leave the original DA. This also works for mcast */ + const u8 *mesh_da = skb->data; + + if (mppath) + mesh_da = mppath->mpp; + else if (mpath) + mesh_da = mpath->dst; + rcu_read_unlock(); - if (is_multicast_ether_addr(skb->data)) - /* DA TA mSA AE:SA */ - mesh_da = skb->data; - else { - static const u8 bcast[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - if (mppath) { - /* RA TA mDA mSA AE:DA SA */ - mesh_da = mppath->mpp; - is_mesh_mcast = 0; - } else if (mpath) { - mesh_da = mpath->dst; - is_mesh_mcast = 0; - } else { - /* DA TA mSA AE:SA */ - mesh_da = bcast; - } - } hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, mesh_da, sdata->vif.addr); - rcu_read_unlock(); - if (is_mesh_mcast) + if (is_multicast_ether_addr(mesh_da)) + /* DA TA mSA AE:SA */ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, skb->data + ETH_ALEN, NULL); else + /* RA TA mDA mSA AE:DA SA */ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata, From 83be4ffa1acbcd529b771f4d2e639b15e2b7957e Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 14 Aug 2012 14:47:37 -0700 Subject: [PATCH 0880/1098] x86/spinlocks: Fix comment in spinlock.h This comment is no longer true. We support up to 2^16 CPUs because __ticket_t is an u16 if NR_CPUS is larger than 256. Signed-off-by: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/include/asm/spinlock.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33867f2..33692eaabab5 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ From 2530cd4f448935c74eeb49f29559589928e4b2f0 Mon Sep 17 00:00:00 2001 From: "Liu, Chuansheng" Date: Tue, 14 Aug 2012 06:55:01 +0000 Subject: [PATCH 0881/1098] x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask When one CPU is going down and this CPU is the last one in irq affinity, current code is setting cpu_all_mask as the new affinity for that irq. But for some systems (such as in Medfield Android mobile) the firmware sends the interrupt to each CPU in the irq affinity mask, averaged, and cpu_all_mask includes all potential CPUs, i.e. offline ones as well. So replace cpu_all_mask with cpu_online_mask. Signed-off-by: liu chuansheng Acked-by: Yanmin Zhang Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A137286@SHSMSX101.ccr.corp.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7ad683d78645..d44f7829968e 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); From 784ffcbb96c3a97b4c64fd48b1dfe12ef3fcbcda Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:46 -0400 Subject: [PATCH 0882/1098] time: Ensure we normalize the timekeeper in tk_xtime_add Andreas noticed problems with resume on specific hardware after commit 1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined with commit b44d50dca (time: Fix casting issue in tk_set_xtime and tk_xtime_add) After some digging I realized we aren't normalizing the timekeeper after the add. Add the missing normalize call. Reported-by: Andreas Schwab Tested-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 898bef066a44..258164ae45cc 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -115,6 +115,7 @@ static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts) { tk->xtime_sec += ts->tv_sec; tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift; + tk_normalize_xtime(tk); } static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm) From 85dc8f05c93c8105987de9d7e7cebf15a72ff4ec Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 21 Aug 2012 20:30:47 -0400 Subject: [PATCH 0883/1098] time: Fix casting issue in timekeeping_forward_now arch_gettimeoffset returns a u32 value which when shifted by tk->shift can overflow. This issue was introduced with 1e75fa8be (time: Condense timekeeper.xtime into xtime_sec) Cast it to u64 first. Signed-off-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 258164ae45cc..1dbf80ec7696 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -277,7 +277,7 @@ static void timekeeping_forward_now(struct timekeeper *tk) tk->xtime_nsec += cycle_delta * tk->mult; /* If arch requires, add in gettimeoffset() */ - tk->xtime_nsec += arch_gettimeoffset() << tk->shift; + tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift; tk_normalize_xtime(tk); From 6ea565a9be32a3c8d1092017686f183b6d8c4514 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:48 -0400 Subject: [PATCH 0884/1098] time: Avoid potential shift overflow with large shift values Andreas Schwab noticed that the 1 << tk->shift could overflow if the shift value was greater than 30, since 1 would be a 32bit long on 32bit architectures. This issue was introduced by 1e75fa8be (time: Condense timekeeper.xtime into xtime_sec) Use 1ULL instead to ensure we don't overflow on the shift. Reported-by: Andreas Schwab Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 1dbf80ec7696..a5a9389c4c30 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1184,9 +1184,9 @@ static void update_wall_time(void) * the vsyscall implementations are converted to use xtime_nsec * (shifted nanoseconds), this can be killed. */ - remainder = tk->xtime_nsec & ((1 << tk->shift) - 1); + remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1); tk->xtime_nsec -= remainder; - tk->xtime_nsec += 1 << tk->shift; + tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; /* From bf2ac312195155511a0f79325515cbb61929898a Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 21 Aug 2012 20:30:49 -0400 Subject: [PATCH 0885/1098] time: Avoid making adjustments if we haven't accumulated anything If update_wall_time() is called and the current offset isn't large enough to accumulate, avoid re-calling timekeeping_adjust which may change the clock freq and can cause 1ns inconsistencies with CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE. Signed-off-by: John Stultz Cc: Prarit Bhargava Cc: Ingo Molnar Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- kernel/time/timekeeping.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index a5a9389c4c30..0c1485e42be6 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -1152,6 +1152,10 @@ static void update_wall_time(void) offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #endif + /* Check if there's really nothing to do */ + if (offset < tk->cycle_interval) + goto out; + /* * With NO_HZ we may have to accumulate many cycle_intervals * (think "ticks") worth of time at once. To do this efficiently, From 65b455b123c7e2b835a0b7148f9bae584f95000e Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 21 Aug 2012 21:50:58 +0300 Subject: [PATCH 0886/1098] UBIFS: fix complaints about too small debug buffer size When debugging is enabled, we use a temporary on-stack buffer for formatting the key strings like "(11368871, direntry, 0xcd0750)". The buffer size is 32 bytes and sometimes it is not enough to fit the key string - e.g., when inode numbers are high. This is not fatal, but the key strings are incomplete and UBIFS complains like this: UBIFS assert failed in dbg_snprintf_key at 137 (pid 1) This is a regression caused by "515315a UBIFS: fix key printing". Fix the issue by increasing the buffer to 48 bytes. Reported-by: Michael Hench Signed-off-by: Artem Bityutskiy Tested-by: Michael Hench Cc: stable@vger.kernel.org [v3.3+] --- fs/ubifs/debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h index 8b8cc4e945f4..760de723dadb 100644 --- a/fs/ubifs/debug.h +++ b/fs/ubifs/debug.h @@ -167,7 +167,7 @@ struct ubifs_global_debug_info { #define ubifs_dbg_msg(type, fmt, ...) \ pr_debug("UBIFS DBG " type ": " fmt "\n", ##__VA_ARGS__) -#define DBG_KEY_BUF_LEN 32 +#define DBG_KEY_BUF_LEN 48 #define ubifs_dbg_msg_key(type, key, fmt, ...) do { \ char __tmp_key_buf[DBG_KEY_BUF_LEN]; \ pr_debug("UBIFS DBG " type ": " fmt "%s\n", ##__VA_ARGS__, \ From cb09cad44f07044d9810f18f6f9a6a6f3771f979 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 22 Aug 2012 13:03:48 +0300 Subject: [PATCH 0887/1098] x86/alternatives: Fix p6 nops on non-modular kernels Probably a leftover from the early days of self-patching, p6nops are marked __initconst_or_module, which causes them to be discarded in a non-modular kernel. If something later triggers patching, it will overwrite kernel code with garbage. Reported-by: Tomas Racek Signed-off-by: Avi Kivity Cc: Michael Tokarev Cc: Borislav Petkov Cc: Marcelo Tosatti Cc: qemu-devel@nongnu.org Cc: Anthony Liguori Cc: H. Peter Anvin Cc: Alan Cox Cc: Alan Cox Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index afb7ff79a29f..ced4534baed5 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, From 6c0274cbe63ec265f842537825684a619e6cce93 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 22 Aug 2012 12:13:48 +0200 Subject: [PATCH 0888/1098] ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc sh73a0 :: intca_irq_pins_desc irq table had conflict from irq 552 to irq 557 before. But the second controller was simply trampling the first one by way of the -EEXIST case from irq_alloc_desc_at(). But now, we have irqdomain support from 1d6a21b0a672fb29b01ccf397d478e0541e17716 (sh: intc: initial irqdomain support) The irqdomain code has simply tightened down the sanity checks and error path. So, sh73a0 CPU board got some WARNING when booting now. This patch fixup RELOC_BASE to solve this issue. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/intc-sh73a0.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c857..588555a67d9c 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, From 35f2d16bb9ace0fb2671b8232839944ad9057c6f Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Mon, 20 Aug 2012 18:35:39 +0900 Subject: [PATCH 0889/1098] KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended Although the possible race described in commit 85b7059169e128c57a3a8a3e588fb89cb2031da1 KVM: MMU: fix shrinking page from the empty mmu was correct, the real cause of that issue was a more trivial bug of mmu_shrink() introduced by commit 1952639665e92481c34c34c3e2a71bf3e66ba362 KVM: MMU: do not iterate over all VMs in mmu_shrink() Here is the bug: if (kvm->arch.n_used_mmu_pages > 0) { if (!nr_to_scan--) break; continue; } We skip VMs whose n_used_mmu_pages is not zero and try to shrink others: in other words we try to shrink empty ones by mistake. This patch reverses the logic so that mmu_shrink() can free pages from the first VM whose n_used_mmu_pages is not zero. Note that we also add comments explaining the role of nr_to_scan which is not practically important now, hoping this will be improved in the future. Signed-off-by: Takuya Yoshikawa Cc: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca00423938..7fbd0d273ea8 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4112,17 +4112,22 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) int idx; LIST_HEAD(invalid_list); + /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); From 934ad4c235f87dcb9206abdfa22922358999afab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 19:49:09 -0400 Subject: [PATCH 0890/1098] vfio: don't dereference after kfree... Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 9591e2b509d7..0b025d58de81 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -416,8 +416,9 @@ static void vfio_device_release(struct kref *kref) /* Device reference always implies a group reference */ static void vfio_device_put(struct vfio_device *device) { + struct vfio_group *group = device->group; kref_put(&device->kref, vfio_device_release); - vfio_group_put(device->group); + vfio_group_put(group); } static void vfio_device_get(struct vfio_device *device) From 8ad5db8a8ddbe3bd33078863a027011e28f1f4ee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 20:10:46 -0400 Subject: [PATCH 0891/1098] introduce kref_put_mutex() equivalent of mutex_lock(mutex); if (!kref_put(kref, release)) mutex_unlock(mutex); Signed-off-by: Al Viro --- include/linux/kref.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/include/linux/kref.h b/include/linux/kref.h index 9c07dcebded7..65af6887872f 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -18,6 +18,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -93,4 +94,21 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) { return kref_sub(kref, 1, release); } + +static inline int kref_put_mutex(struct kref *kref, + void (*release)(struct kref *kref), + struct mutex *lock) +{ + WARN_ON(release == NULL); + if (unlikely(!atomic_add_unless(&kref->refcount, -1, 1))) { + mutex_lock(lock); + if (unlikely(!atomic_dec_and_test(&kref->refcount))) { + mutex_unlock(lock); + return 0; + } + release(kref); + return 1; + } + return 0; +} #endif /* _KREF_H_ */ From 6d2cd3ce815b302e885b44ca1bdbe3c7db321c7a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:27:32 -0400 Subject: [PATCH 0892/1098] vfio: get rid of open-coding kref_put_mutex Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 0b025d58de81..92b85676e6be 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -264,6 +264,7 @@ static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group) return group; } +/* called with vfio.group_lock held */ static void vfio_group_release(struct kref *kref) { struct vfio_group *group = container_of(kref, struct vfio_group, kref); @@ -287,13 +288,7 @@ static void vfio_group_release(struct kref *kref) static void vfio_group_put(struct vfio_group *group) { - mutex_lock(&vfio.group_lock); - /* - * Release needs to unlock to unregister the notifier, so only - * unlock if not released. - */ - if (!kref_put(&group->kref, vfio_group_release)) - mutex_unlock(&vfio.group_lock); + kref_put_mutex(&group->kref, vfio_group_release, &vfio.group_lock); } /* Assume group_lock or group reference is held */ From 042b92c185cbd7b4291710255510ae76b2d7797b Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 22 Aug 2012 16:10:43 +0200 Subject: [PATCH 0893/1098] ALSA: hda - Do not set GPIOs for speakers on IDT if there are no speakers This fixes an issue with a machine where there were no speakers, but GPIO0 had to be data=1 for the headphone to be functioning. I'm not sure if we need a more advanced patch to solve all possible cases, but if so, this patch would still provide a minor optimisation. BugLink: https://bugs.launchpad.net/bugs/1040077 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea5775a1a7db..3edd73c3d361 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4543,6 +4543,9 @@ static void stac92xx_line_out_detect(struct hda_codec *codec, struct auto_pin_cfg *cfg = &spec->autocfg; int i; + if (cfg->speaker_outs == 0) + return; + for (i = 0; i < cfg->line_outs; i++) { if (presence) break; From 90b1253e4139776e8257914ae9e2292d0de2fecc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:29:06 -0400 Subject: [PATCH 0894/1098] vfio: get rid of vfio_device_put()/vfio_group_get_device* races we really need to make sure that dropping the last reference happens under the group->device_lock; otherwise a loop (under device_lock) might find vfio_device instance that is being freed right now, has already dropped the last reference and waits on device_lock to exclude the sucker from the list. Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 92b85676e6be..887ae43276bb 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -396,7 +396,6 @@ static void vfio_device_release(struct kref *kref) struct vfio_device, kref); struct vfio_group *group = device->group; - mutex_lock(&group->device_lock); list_del(&device->group_next); mutex_unlock(&group->device_lock); @@ -412,7 +411,7 @@ static void vfio_device_release(struct kref *kref) static void vfio_device_put(struct vfio_device *device) { struct vfio_group *group = device->group; - kref_put(&device->kref, vfio_device_release); + kref_put_mutex(&device->kref, vfio_device_release, &group->device_lock); vfio_group_put(group); } From 31605debdf5459cc8aacabf192a911a803a81c26 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 21:32:56 -0400 Subject: [PATCH 0895/1098] vfio: grab vfio_device reference *before* exposing the sucker via fd_install() It's not critical (anymore) since another thread closing the file will block on ->device_lock before it gets to dropping the final reference, but it's definitely cleaner that way... Acked-by: Alex Williamson Signed-off-by: Al Viro --- drivers/vfio/vfio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 887ae43276bb..17830c9c7cc6 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -1111,10 +1111,10 @@ static int vfio_group_get_device_fd(struct vfio_group *group, char *buf) */ filep->f_mode |= (FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE); - fd_install(ret, filep); - vfio_device_get(device); atomic_inc(&group->container_users); + + fd_install(ret, filep); break; } mutex_unlock(&group->device_lock); From 98022748f6c7bce85b9f123fd4d1a621219dd8d9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Aug 2012 22:42:36 -0400 Subject: [PATCH 0896/1098] eventpoll: use-after-possible-free in epoll_create1() As soon as we'd installed the file into descriptor table, it can get closed by another thread. Freeing ep in process... Signed-off-by: Al Viro --- fs/eventpoll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 1c8b55670804..eedec84c1809 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1654,8 +1654,8 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) error = PTR_ERR(file); goto out_free_fd; } - fd_install(fd, file); ep->file = file; + fd_install(fd, file); return fd; out_free_fd: From 55852635a8e2803cbc22d0e143d727813f0fcdb5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 17:39:25 -0700 Subject: [PATCH 0897/1098] fs: fix fs/namei.c kernel-doc warnings Fix kernel-doc warnings in fs/namei.c: Warning(fs/namei.c:360): No description found for parameter 'inode' Warning(fs/namei.c:672): No description found for parameter 'nd' Signed-off-by: Randy Dunlap Cc: Alexander Viro Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- fs/namei.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index db76b866a097..dd1ed1b8e98e 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -352,6 +352,7 @@ int __inode_permission(struct inode *inode, int mask) /** * sb_permission - Check superblock-level permissions * @sb: Superblock of inode to check permission on + * @inode: Inode to check permission on * @mask: Right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC) * * Separate out file-system wide checks from inode-specific permission checks. @@ -656,6 +657,7 @@ int sysctl_protected_hardlinks __read_mostly = 1; /** * may_follow_link - Check symlink following for unsafe situations * @link: The path of the symlink + * @nd: nameidata pathwalk data * * In the case of the sysctl_protected_symlinks sysctl being enabled, * CAP_DAC_OVERRIDE needs to be specifically ignored if the symlink is From 88ec2789d856056344161aa20420dd37e893b0fe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 15:05:14 +0200 Subject: [PATCH 0898/1098] task_work: add a scheduling point in task_work_run() It seems commit 4a9d4b02 (switch fput to task_work_add) reintroduced the problem addressed in commit 944be0b2 (close_files(): add scheduling point) If a server process with a lot of files (say 2 million tcp sockets) is killed, we can spend a lot of time in task_work_run() and trigger a soft lockup. Signed-off-by: Eric Dumazet Signed-off-by: Al Viro --- kernel/task_work.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/task_work.c b/kernel/task_work.c index 91d4e1742a0c..d320d44903bd 100644 --- a/kernel/task_work.c +++ b/kernel/task_work.c @@ -75,6 +75,7 @@ void task_work_run(void) p = q->next; q->func(q); q = p; + cond_resched(); } } } From 69f9025894c391fec2f7c7ea9150203418454915 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 22 Aug 2012 16:47:28 +0300 Subject: [PATCH 0899/1098] UBIFS: fix error messages spelling Corruptio -> corruption. Signed-off-by: Artem Bityutskiy --- fs/ubifs/recovery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index c30d976b4be8..edeec499c048 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -788,7 +788,7 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum, corrupted_rescan: /* Re-scan the corrupted data with verbose messages */ - ubifs_err("corruptio %d", ret); + ubifs_err("corruption %d", ret); ubifs_scan_a_node(c, buf, len, lnum, offs, 1); corrupted: ubifs_scanned_corruption(c, lnum, offs, buf); From 53c84983549230495156d7da666cd1acdb9c9015 Mon Sep 17 00:00:00 2001 From: Simon Farnsworth Date: Wed, 22 Aug 2012 11:17:17 +0100 Subject: [PATCH 0900/1098] HID: Remove QUANTA from special drivers list This QUANTA device is driven by the generic hid-multitouch.ko driver, and therefore shouldn't be in the special drivers list. This has been an oversight in 4fa3a58 ("HID: hid-multitouch: Switch to device groups"). Signed-off-by: Simon Farnsworth Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 500844f04f93..78f0ee74b853 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1624,7 +1624,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, From ea2d218308e5710c70d76eb3c2876988c88119cc Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Sun, 5 Aug 2012 00:29:07 +0300 Subject: [PATCH 0901/1098] brcm80211: smac: set interface down on reset This change marks interface as down on reset, otherwise the driver can't reinitialize itself properly. Without the change a transient problem turns out to be critical and leads to inavailability to reset the driver without brcmsmac module unload/load cycle: ieee80211 phy0: wl0: PSM microcode watchdog fired at 5993 (seconds). Resetting. brcms_c_dpc : PSM Watchdog, chipid 0xa8d9, chiprev 0x1 ieee80211 phy0: wl0: fatal error, reinitializing ieee80211 phy0: Hardware restart was requested ieee80211 phy0: brcms_ops_start: brcms_up() returned -19 Signed-off-by: Vladimir Zapolskiy Cc: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 192ad5c1fcc8..a5edebeb0b4f 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl) /* dpc will not be rescheduled */ wl->resched = false; + /* inform publicly that interface is down */ + wl->pub->up = false; + return 0; } From fea7a08acb13524b47711625eebea40a0ede69a0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 22 Aug 2012 13:29:06 -0700 Subject: [PATCH 0902/1098] Linux 3.6-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9cc77acfc881..354026873b13 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* From 5ad105e569c45dcfad50d724c61d5061248be755 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 19 Aug 2012 14:34:31 +0300 Subject: [PATCH 0903/1098] KVM: x86 emulator: use stack size attribute to mask rsp in stack ops The sub-register used to access the stack (sp, esp, or rsp) is not determined by the address size attribute like other memory references, but by the stack segment's B bit (if not in x86_64 mode). Fix by using the existing stack_mask() to figure out the correct mask. This long-existing bug was exposed by a combination of a27685c33acccce (emulate invalid guest state by default), which causes many more instructions to be emulated, and a seabios change (possibly a bug) which causes the high 16 bits of esp to become polluted across calls to real mode software interrupts. Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/emulate.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a9914ba8..a3b57a27be88 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } From 36bf50d7697be18c6bfd0401e037df10bff1e573 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 31 Jul 2012 15:41:45 +0200 Subject: [PATCH 0904/1098] x86, microcode, AMD: Fix broken ucode patch size check This issue was recently observed on an AMD C-50 CPU where a patch of maximum size was applied. Commit be62adb49294 ("x86, microcode, AMD: Simplify ucode verification") added current_size in get_matching_microcode(). This is calculated as size of the ucode patch + 8 (ie. size of the header). Later this is compared against the maximum possible ucode patch size for a CPU family. And of course this fails if the patch has already maximum size. Cc: [3.3+] Signed-off-by: Andreas Herrmann Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin --- arch/x86/kernel/microcode_amd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8fd41c0..82746f942cd8 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; From 9b04f350057863d1fad1ba071e09362a1da3503e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Aug 2012 20:48:29 +0000 Subject: [PATCH 0905/1098] ipv4: properly update pmtu Sylvain Munault reported following info : - TCP connection get "stuck" with data in send queue when doing "large" transfers ( like typing 'ps ax' on a ssh connection ) - Only happens on path where the PMTU is lower than the MTU of the interface - Is not present right after boot, it only appears 10-20min after boot or so. (and that's inside the _same_ TCP connection, it works fine at first and then in the same ssh session, it'll get stuck) - Definitely seems related to fragments somehow since I see a router sending ICMP message saying fragmentation is needed. - Exact same setup works fine with kernel 3.5.1 Problem happens when the 10 minutes (ip_rt_mtu_expires) expiration period is over. ip_rt_update_pmtu() calls dst_set_expires() to rearm a new expiration, but dst_set_expires() does nothing because dst.expires is already set. It seems we want to set the expires field to a new value, regardless of prior one. With help from Julian Anastasov. Reported-by: Sylvain Munaut Signed-off-by: Eric Dumazet CC: Julian Anastasov Tested-by: Sylvain Munaut Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fd9ecb52c66b..8c8c748ebb28 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -956,7 +956,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk, dst->obsolete = DST_OBSOLETE_KILL; } else { rt->rt_pmtu = mtu; - dst_set_expires(&rt->dst, ip_rt_mtu_expires); + rt->dst.expires = max(1UL, jiffies + ip_rt_mtu_expires); } } From 5f42f7bc9638a0bc69dcb8b8b6da542b72113fc2 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 22 Aug 2012 00:26:15 +0000 Subject: [PATCH 0906/1098] stmmac: fix GMAC syn ID Erroneously the DWMAC_CORE_3_40 was set to 34 instead of 0x34. This can generate problems when run on old chips because the driver assumes that there are the extra 16 regs available for perfect filtering. Signed-off-by: Giuseppe Cavallaro Cc: Gianni Antoniazzi Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index f90fcb5f9573..b4c44a587f02 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -229,6 +229,6 @@ enum rtc_control { #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 /* Synopsys Core versions */ -#define DWMAC_CORE_3_40 34 +#define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; From a6b9650108003e994770209fb8efedf6e214dcf7 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Wed, 22 Aug 2012 00:26:16 +0000 Subject: [PATCH 0907/1098] stmmac: fix a typo in the macro used to mask the mmc irq This patch fixes the name of the macro used to mask the mmc interrupt: erroneously it was used: MMC_DEFAUL_MASK. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index c07cfe989f6e..0c74a702d461 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -33,7 +33,7 @@ #define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */ #define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */ #define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */ -#define MMC_DEFAUL_MASK 0xffffffff +#define MMC_DEFAULT_MASK 0xffffffff /* MMC TX counter registers */ @@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode) /* To mask all all interrupts.*/ void dwmac_mmc_intr_all_mask(void __iomem *ioaddr) { - writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK); - writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK); + writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK); } /* This reads the MAC core counters (if actaully supported). From 43ca6cb28c871f2fbad10117b0648e5ae3b0f638 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Tue, 21 Aug 2012 17:36:28 +0200 Subject: [PATCH 0908/1098] hwmon: (asus_atk0110) Add quirk for Asus M5A78L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The old interface is bugged and reads the wrong sensor when retrieving the reading for the chassis fan (it reads the CPU sensor); the new interface works fine. Reported-by: Göran Uddeborg Cc: stable@vger.kernel.org Tested-by: Göran Uddeborg Signed-off-by: Luca Tettamanti Signed-off-by: Guenter Roeck --- drivers/hwmon/asus_atk0110.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 351d1f4593e7..4ee578948723 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -34,6 +34,12 @@ static const struct dmi_system_id __initconst atk_force_new_if[] = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58") } + }, { + /* Old interface reads the same sensor for fan0 and fan1 */ + .ident = "Asus M5A78L", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "M5A78L") + } }, { } }; From b70ad586162609141f0aa9eb34790f31a8954f89 Mon Sep 17 00:00:00 2001 From: "Xu, Anhua" Date: Mon, 13 Aug 2012 03:08:33 +0000 Subject: [PATCH 0909/1098] drm/i915: fix wrong order of parameters in port checking functions Wrong order of parameters passed-in when calling hdmi/adpa /lvds_pipe_enabled(), 2nd and 3rd parameters are reversed. This bug was indroduced by commit 1519b9956eb4b4180fa3f47c73341463cdcfaa37 Author: Keith Packard Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths The reachable tag for this commit is v3.1-rc1-3-g1519b99 Signed-off-by: Anhua Xu Reviewed-by: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876 Tested-by: Daniel Schroeder Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a69a3d0d3acf..2dfa6cf4886b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1384,7 +1384,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - WARN(hdmi_pipe_enabled(dev_priv, val, pipe), + WARN(hdmi_pipe_enabled(dev_priv, pipe, val), "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); @@ -1404,13 +1404,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - WARN(adpa_pipe_enabled(dev_priv, val, pipe), + WARN(adpa_pipe_enabled(dev_priv, pipe, val), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); - WARN(lvds_pipe_enabled(dev_priv, val, pipe), + WARN(lvds_pipe_enabled(dev_priv, pipe, val), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); @@ -1872,7 +1872,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - if (hdmi_pipe_enabled(dev_priv, val, pipe)) { + if (hdmi_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~PORT_ENABLE); @@ -1894,12 +1894,12 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - if (adpa_pipe_enabled(dev_priv, val, pipe)) + if (adpa_pipe_enabled(dev_priv, pipe, val)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); - if (lvds_pipe_enabled(dev_priv, val, pipe)) { + if (lvds_pipe_enabled(dev_priv, pipe, val)) { DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); From 5ee369138d28c17305e1cdc662a62a2fc83d80d7 Mon Sep 17 00:00:00 2001 From: Vijay Purushothaman Date: Thu, 23 Aug 2012 12:08:57 +0530 Subject: [PATCH 0910/1098] drm/i915: fix color order for BGR formats on IVB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is already fixed for ILK and SNB in the below commit but somehow IVB is missed. commit ab2f9df10dd955f1fc0a8650e377588c98f1c029 Author: Jesse Barnes Date: Mon Feb 27 12:40:10 2012 -0800 drm/i915: fix color order for BGR formats on SNB Had the wrong bits and field definitions. Signed-off-by: Vijay Purushothaman Reviewed-by: Antti Koskipää Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index cc8df4de2d92..7644f31a3778 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -60,11 +60,11 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, switch (fb->pixel_format) { case DRM_FORMAT_XBGR8888: - sprctl |= SPRITE_FORMAT_RGBX888; + sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; pixel_size = 4; break; case DRM_FORMAT_XRGB8888: - sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX; + sprctl |= SPRITE_FORMAT_RGBX888; pixel_size = 4; break; case DRM_FORMAT_YUYV: From 676ce6d5ca3098339c028d44fe0427d1566a4d2d Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 23 Aug 2012 12:17:36 +0200 Subject: [PATCH 0911/1098] block: replace __getblk_slow misfix by grow_dev_page fix Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow") is not good: a successful call to grow_buffers() cannot guarantee that the page won't be reclaimed before the immediate next call to __find_get_block(), which is why there was always a loop there. Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595: inode #19278: block 664: comm cc1: unable to read itable block" on console, which pointed to this commit. I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs sometimes fails from a missing header file, under memory pressure on ppc G5. I've never seen this on x86, and I've never seen it on 3.5-rc7 itself, despite that commit being in there: bisection pointed to an irrelevant pinctrl merge, but hard to tell when failure takes between 18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2). (I've since found such __ext4_get_inode_loc errors in /var/log/messages from previous weeks: why the message never appeared on console until yesterday morning is a mystery for another day.) Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus a checkpatch nitfix). Simplify the interface between grow_buffers() and grow_dev_page(), and avoid the infinite loop beyond end of device by instead checking init_page_buffers()'s end_block there (I presume that's more efficient than a repeated call to blkdev_max_block()), returning -ENXIO to __getblk_slow() in that case. And remove akpm's ten-year-old "__getblk() cannot fail ... weird" comment, but that is worrying: are all users of __getblk() really now prepared for a NULL bh beyond end of device, or will some oops?? Signed-off-by: Hugh Dickins Cc: stable@vger.kernel.org # 3.0 3.2 3.4 3.5 Signed-off-by: Jens Axboe --- fs/buffer.c | 66 ++++++++++++++++++++++++----------------------------- 1 file changed, 30 insertions(+), 36 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 9f6d2e41281d..58e2e7b77372 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -914,7 +914,7 @@ link_dev_buffers(struct page *page, struct buffer_head *head) /* * Initialise the state of a blockdev page's buffers. */ -static void +static sector_t init_page_buffers(struct page *page, struct block_device *bdev, sector_t block, int size) { @@ -936,33 +936,41 @@ init_page_buffers(struct page *page, struct block_device *bdev, block++; bh = bh->b_this_page; } while (bh != head); + + /* + * Caller needs to validate requested block against end of device. + */ + return end_block; } /* * Create the page-cache page that contains the requested block. * - * This is user purely for blockdev mappings. + * This is used purely for blockdev mappings. */ -static struct page * +static int grow_dev_page(struct block_device *bdev, sector_t block, - pgoff_t index, int size) + pgoff_t index, int size, int sizebits) { struct inode *inode = bdev->bd_inode; struct page *page; struct buffer_head *bh; + sector_t end_block; + int ret = 0; /* Will call free_more_memory() */ page = find_or_create_page(inode->i_mapping, index, (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE); if (!page) - return NULL; + return ret; BUG_ON(!PageLocked(page)); if (page_has_buffers(page)) { bh = page_buffers(page); if (bh->b_size == size) { - init_page_buffers(page, bdev, block, size); - return page; + end_block = init_page_buffers(page, bdev, + index << sizebits, size); + goto done; } if (!try_to_free_buffers(page)) goto failed; @@ -982,14 +990,14 @@ grow_dev_page(struct block_device *bdev, sector_t block, */ spin_lock(&inode->i_mapping->private_lock); link_dev_buffers(page, bh); - init_page_buffers(page, bdev, block, size); + end_block = init_page_buffers(page, bdev, index << sizebits, size); spin_unlock(&inode->i_mapping->private_lock); - return page; - +done: + ret = (block < end_block) ? 1 : -ENXIO; failed: unlock_page(page); page_cache_release(page); - return NULL; + return ret; } /* @@ -999,7 +1007,6 @@ failed: static int grow_buffers(struct block_device *bdev, sector_t block, int size) { - struct page *page; pgoff_t index; int sizebits; @@ -1023,22 +1030,14 @@ grow_buffers(struct block_device *bdev, sector_t block, int size) bdevname(bdev, b)); return -EIO; } - block = index << sizebits; + /* Create a page with the proper size buffers.. */ - page = grow_dev_page(bdev, block, index, size); - if (!page) - return 0; - unlock_page(page); - page_cache_release(page); - return 1; + return grow_dev_page(bdev, block, index, size, sizebits); } static struct buffer_head * __getblk_slow(struct block_device *bdev, sector_t block, int size) { - int ret; - struct buffer_head *bh; - /* Size must be multiple of hard sectorsize */ if (unlikely(size & (bdev_logical_block_size(bdev)-1) || (size < 512 || size > PAGE_SIZE))) { @@ -1051,21 +1050,20 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size) return NULL; } -retry: - bh = __find_get_block(bdev, block, size); - if (bh) - return bh; + for (;;) { + struct buffer_head *bh; + int ret; - ret = grow_buffers(bdev, block, size); - if (ret == 0) { - free_more_memory(); - goto retry; - } else if (ret > 0) { bh = __find_get_block(bdev, block, size); if (bh) return bh; + + ret = grow_buffers(bdev, block, size); + if (ret < 0) + return NULL; + if (ret == 0) + free_more_memory(); } - return NULL; } /* @@ -1321,10 +1319,6 @@ EXPORT_SYMBOL(__find_get_block); * which corresponds to the passed block_device, block and size. The * returned buffer has its reference count incremented. * - * __getblk() cannot fail - it just keeps trying. If you pass it an - * illegal block number, __getblk() will happily return a buffer_head - * which represents the non-existent block. Very weird. - * * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers() * attempt is failing. FIXME, perhaps? */ From e432964a3c5ce517fd93101ae3875172ee958b65 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 24 Jul 2012 03:00:24 +0200 Subject: [PATCH 0912/1098] fbcon: prevent possible buffer overflow. Signed-off-by: Paul Cercueil Signed-off-by: Florian Tobias Schandinat --- drivers/video/console/fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 88e92041d8f0..fdefa8fd72c4 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -449,7 +449,7 @@ static int __init fb_console_setup(char *this_opt) while ((options = strsep(&this_opt, ",")) != NULL) { if (!strncmp(options, "font:", 5)) - strcpy(fontname, options + 5); + strlcpy(fontname, options + 5, sizeof(fontname)); if (!strncmp(options, "scrollback:", 11)) { options += 11; From 72caa5fb948ef818fe1332848e9c61b10687ce7a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Mon, 30 Jul 2012 21:09:49 +0200 Subject: [PATCH 0913/1098] fbcon: Fix bit_putcs() call to kmalloc(s, GFP_KERNEL) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Switch to kmalloc(,GFP_ATOMIC) in bit_putcs to fix below trace: [ 9.771812] BUG: sleeping function called from invalid context at /usr/src/linux-git/mm/slub.c:943 [ 9.771814] in_atomic(): 1, irqs_disabled(): 1, pid: 1063, name: mount [ 9.771818] Pid: 1063, comm: mount Not tainted 3.5.0-jupiter-00003-g8d858b1-dirty #2 [ 9.771819] Call Trace: [ 9.771838] [] __might_sleep+0xcb/0xe0 [ 9.771844] [] __kmalloc+0xb4/0x1c0 [ 9.771851] [] ? queue_work+0x1a/0x30 [ 9.771854] [] ? queue_delayed_work+0xf/0x30 [ 9.771862] [] ? bit_putcs+0xf2/0x3e0 [ 9.771865] [] ? schedule_delayed_work+0x11/0x20 [ 9.771868] [] bit_putcs+0xf2/0x3e0 [ 9.771875] [] ? get_color.clone.14+0x28/0x100 [ 9.771878] [] fbcon_putcs+0x11f/0x130 [ 9.771882] [] ? bit_clear+0xe0/0xe0 [ 9.771885] [] fbcon_redraw.clone.21+0x11d/0x160 [ 9.771889] [] fbcon_scroll+0x79d/0xe10 [ 9.771892] [] ? get_color.clone.14+0x28/0x100 [ 9.771897] [] scrup+0x64/0xd0 [ 9.771900] [] lf+0x2b/0x60 [ 9.771903] [] vt_console_print+0x1d5/0x2f0 [ 9.771907] [] ? register_vt_notifier+0x20/0x20 [ 9.771913] [] call_console_drivers.clone.5+0xa5/0xc0 [ 9.771916] [] console_unlock+0x2fe/0x3c0 [ 9.771920] [] vprintk_emit+0x2e6/0x300 [ 9.771924] [] printk+0x38/0x3a [ 9.771931] [] reiserfs_remount+0x2ae/0x3e0 [ 9.771934] [] ? reiserfs_fill_super+0xb00/0xb00 [ 9.771939] [] do_remount_sb+0xab/0x150 [ 9.771943] [] ? ns_capable+0x46/0x70 [ 9.771948] [] do_mount+0x20c/0x6b0 [ 9.771955] [] ? strndup_user+0x34/0x50 [ 9.771958] [] sys_mount+0x6c/0xa0 [ 9.771964] [] sysenter_do_call+0x12/0x26 According to comment in bit_putcs() that kammloc() call only happens when fbcon is drawing to a monochrome framebuffer (which is my case with hid-picolcd). Signed-off-by: Bruno Prémont Signed-off-by: Florian Tobias Schandinat --- drivers/video/console/bitblit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c index 28b1a834906b..61b182bf32a2 100644 --- a/drivers/video/console/bitblit.c +++ b/drivers/video/console/bitblit.c @@ -162,7 +162,7 @@ static void bit_putcs(struct vc_data *vc, struct fb_info *info, image.depth = 1; if (attribute) { - buf = kmalloc(cellsize, GFP_KERNEL); + buf = kmalloc(cellsize, GFP_ATOMIC); if (!buf) return; } From 01817d194a5c078696ac4a31b5d8b99a6a9e40c7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 14:00:30 +0200 Subject: [PATCH 0914/1098] drivers/video/auo_k190x.c: drop kfree of devm_kzalloc's data Using kfree to free data allocated with devm_kzalloc causes double frees. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x; @@ x = devm_kzalloc(...) ... ?-kfree(x); // Signed-off-by: Julia Lawall Signed-off-by: Florian Tobias Schandinat --- drivers/video/auo_k190x.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c index 77da6a2f43dc..c03ecdd31e4c 100644 --- a/drivers/video/auo_k190x.c +++ b/drivers/video/auo_k190x.c @@ -987,7 +987,6 @@ err_regfb: fb_dealloc_cmap(&info->cmap); err_cmap: fb_deferred_io_cleanup(info); - kfree(info->fbdefio); err_defio: vfree((void *)info->screen_base); err_irq: @@ -1022,7 +1021,6 @@ int __devexit auok190x_common_remove(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap); fb_deferred_io_cleanup(info); - kfree(info->fbdefio); vfree((void *)info->screen_base); From 25682362564fa0c950d9afe798def2ec9c3676a2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Aug 2012 18:55:41 +0300 Subject: [PATCH 0915/1098] video: mb862xxfb: prevent divide by zero bug Do a sanity check on these before using them as divisors. Signed-off-by: Dan Carpenter Acked-by: Anatolij Gustschin Signed-off-by: Florian Tobias Schandinat --- drivers/video/mb862xx/mb862xxfbdrv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c index 00ce1f34b496..57d940be5f3d 100644 --- a/drivers/video/mb862xx/mb862xxfbdrv.c +++ b/drivers/video/mb862xx/mb862xxfbdrv.c @@ -328,6 +328,8 @@ static int mb862xxfb_ioctl(struct fb_info *fbi, unsigned int cmd, case MB862XX_L1_SET_CFG: if (copy_from_user(l1_cfg, argp, sizeof(*l1_cfg))) return -EFAULT; + if (l1_cfg->dh == 0 || l1_cfg->dw == 0) + return -EINVAL; if ((l1_cfg->sw >= l1_cfg->dw) && (l1_cfg->sh >= l1_cfg->dh)) { /* downscaling */ outreg(cap, GC_CAP_CSC, From 35d678664873041026171b4b5e1cec49299e33a0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 21 Aug 2012 09:09:47 +0300 Subject: [PATCH 0916/1098] OMAPDSS: Fix SDI PLL locking Commit f476ae9dab3234532d41d36beb4ba7be838fa786 (OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface) broke the SDI output, as it causes the SDI PLL locking to fail. LCLK and PCLK divisors are located in shadow registers, and we normally write them to DISPC registers when enabling the output. However, SDI uses pck-free as source clock for its PLL, and pck-free is affected by the divisors. And as we need the PLL before enabling the output, we need to write the divisors early. It seems just writing to the DISPC register is enough, and we don't need to care about the shadow register mechanism for pck-free. The exact reason for this is unknown. Signed-off-by: Tomi Valkeinen Reported-by: Aaro Koskinen Signed-off-by: Florian Tobias Schandinat --- drivers/video/omap2/dss/sdi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c index 5d31699fbd3c..f43bfe17b3b6 100644 --- a/drivers/video/omap2/dss/sdi.c +++ b/drivers/video/omap2/dss/sdi.c @@ -105,6 +105,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) sdi_config_lcd_manager(dssdev); + /* + * LCLK and PCLK divisors are located in shadow registers, and we + * normally write them to DISPC registers when enabling the output. + * However, SDI uses pck-free as source clock for its PLL, and pck-free + * is affected by the divisors. And as we need the PLL before enabling + * the output, we need to write the divisors early. + * + * It seems just writing to the DISPC register is enough, and we don't + * need to care about the shadow register mechanism for pck-free. The + * exact reason for this is unknown. + */ + dispc_mgr_set_clock_div(dssdev->manager->id, + &sdi.mgr_config.clock_info); + dss_sdi_init(dssdev->phy.sdi.datapairs); r = dss_sdi_enable(); if (r) From c1c52848cef52e157468b8879fc3cae23b6f3a99 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Tue, 21 Aug 2012 09:09:48 +0300 Subject: [PATCH 0917/1098] OMAPFB: fix framebuffer console colors omapfb does not currently set pseudo palette correctly for color depths above 16bpp, making red text invisible, command like echo -e '\e[0;31mRED' > /dev/tty1 will display nothing on framebuffer console in 24bpp mode. This is because temporary variable is declared incorrectly, fix it. Signed-off-by: Grazvydas Ignotas Cc: stable@vger.kernel.org # v3.x Signed-off-by: Tomi Valkeinen Signed-off-by: Florian Tobias Schandinat --- drivers/video/omap2/omapfb/omapfb-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 08ec1a7103f2..fc671d3d8004 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -1192,7 +1192,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, break; if (regno < 16) { - u16 pal; + u32 pal; pal = ((red >> (16 - var->red.length)) << var->red.offset) | ((green >> (16 - var->green.length)) << From 85ebea12f59e3341049a9c17edcb73fcf21043db Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 14 Aug 2012 11:19:21 +0200 Subject: [PATCH 0918/1098] ARM: at91: fix system timer irq issue due to sparse irq support AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. Signed-off-by: Ludovic Desroches Tested-by: Joachim Eastwood Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18..aaa443b48c91 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting From e402af6caa02f12ad213af2e22aa8a32970f99b0 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 14 Aug 2012 11:19:22 +0200 Subject: [PATCH 0919/1098] ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. It modifies rtc-at91sam9 driver in order to get irq from resources. Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91sam9260_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9261_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9263_devices.c | 10 ++++++++-- arch/arm/mach-at91/at91sam9g45_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9rl_devices.c | 6 +++++- drivers/rtc/rtc-at91sam9.c | 22 +++++++++++++++------- 6 files changed, 43 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396ed..bce572a530ef 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92..bc2590d712d0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f..9b6ca734f1a9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a382..1b47319ca00b 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172..b3d365dadef5 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 831868904e02..1dd61f402b04 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -58,6 +58,7 @@ struct sam9_rtc { struct rtc_device *rtcdev; u32 imr; void __iomem *gpbr; + int irq; }; #define rtt_readl(rtc, field) \ @@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) { struct resource *r, *r_gpbr; struct sam9_rtc *rtc; - int ret; + int ret, irq; u32 mr; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) return -ENODEV; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get interrupt resource\n"); + return irq; + } + rtc = kzalloc(sizeof *rtc, GFP_KERNEL); if (!rtc) return -ENOMEM; + rtc->irq = irq; + /* platform setup code should have handled this; sigh */ if (!device_can_wakeup(&pdev->dev)) device_init_wakeup(&pdev->dev, 1); @@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) } /* register irq handler after we know what name we'll use */ - ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, - IRQF_SHARED, + ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED, dev_name(&rtc->rtcdev->dev), rtc); if (ret) { - dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); + dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); rtc_device_unregister(rtc->rtcdev); goto fail_register; } @@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev) /* disable all interrupts */ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); - free_irq(AT91_ID_SYS, rtc); + free_irq(rtc->irq, rtc); rtc_device_unregister(rtc->rtcdev); @@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev, rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); if (rtc->imr) { if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { - enable_irq_wake(AT91_ID_SYS); + enable_irq_wake(rtc->irq); /* don't let RTTINC cause wakeups */ if (mr & AT91_RTT_RTTINCIEN) rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); @@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev) if (rtc->imr) { if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(AT91_ID_SYS); + disable_irq_wake(rtc->irq); mr = rtt_readl(rtc, MR); rtt_writel(rtc, MR, mr | rtc->imr); } From 2ed1f58900280f79485bbc15f781687bd9584675 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 9 Jul 2012 21:06:25 +0200 Subject: [PATCH 0920/1098] ARM: at91/clock: fix PLLA overclock warning Fix PLLA overclock warning in relation with datasheet numbers. Add new > 240 MHz and > 210 MHz SoC categories. Reported-by: Jiri Prchal Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/clock.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7..188c82971ebd 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; From 9e0255dd035348953e23161b7158b2ce0ddc182e Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 17 Aug 2012 16:23:56 +0800 Subject: [PATCH 0921/1098] ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts Remove the malformed "mem=" bootargs parameter in at91sam9g25ek.dts Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9g25ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22..96514c134e54 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { From c944b0b9354ea06ffb0c8a7178949f1185f9f499 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 18 Aug 2012 14:27:32 +0800 Subject: [PATCH 0922/1098] ARM: imx6: spin the cpu until hardware takes it down Though commit 602bf40 (ARM: imx6: exit coherency when shutting down a cpu) improves the stability of imx6q cpu hotplug a lot, there are still hangs seen with a more stressful hotplug testing. It's expected that once imx_enable_cpu(cpu, false) is called, the cpu will be taken down by hardware immediately, and the code after that will not get any chance to execute. However, this is not always the case from the testing. The cpu could possibly be alive for a few cycles before hardware actually takes it down. So rather than letting cpu execute some code that could cause a hang in these cycles, let's make the cpu spin there and wait for hardware to take it down. Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/hotplug.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1af..f8f7437c83b8 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) From a46d2619d7180bda12bad2bf15bbd0731dfc2dcf Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:46:39 +0800 Subject: [PATCH 0923/1098] ARM: dts: imx51-babbage: fix esdhc cd/wp properties The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball Signed-off-by: Shawn Guo Cc: Acked-by: Chris Ball --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 8 ++++---- arch/arm/boot/dts/imx51-babbage.dts | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa8..1dd622546d06 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea2..59d9789e5508 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; From a1dca315ce3f78347bca8ce8befe3cc71ae63b7e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 23 Aug 2012 15:35:26 +0200 Subject: [PATCH 0924/1098] MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module If the controller has no PCIe module attached, accessing of the device configuration space causes a data bus error. Avoid this by checking the status of the PCIe link in advance, and indicate an error if the link is down. Signed-off-by: Gabor Juhos Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4293/ Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ar724x.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a7459858d..86d77a666458 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); From c96aae1f7f393387d160211f60398d58463a7e65 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 16:43:28 -0400 Subject: [PATCH 0925/1098] xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M. When we are finished with return PFNs to the hypervisor, then populate it back, and also mark the E820 MMIO and E820 gaps as IDENTITY_FRAMEs, we then call P2M to set areas that can be used for ballooning. We were off by one, and ended up over-writting a P2M entry that most likely was an IDENTITY_FRAME. For example: 1-1 mapping on 40000->40200 1-1 mapping on bc558->bc5ac 1-1 mapping on bc5b4->bc8c5 1-1 mapping on bc8c6->bcb7c 1-1 mapping on bcd00->100000 Released 614 pages of unused memory Set 277889 page(s) to 1-1 mapping Populating 40200-40466 pfn range: 614 pages added => here we set from 40466 up to bc559 P2M tree to be INVALID_P2M_ENTRY. We should have done it up to bc558. The end result is that if anybody is trying to construct a PTE for PFN bc558 they end up with ~PAGE_PRESENT. CC: stable@vger.kernel.org Reported-by-and-Tested-by: Andre Przywara Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead85576d54a..d11ca11d14fc 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, From c7a9b09b1a4a1fbccb2ec409daec95f9068d77c0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 20:51:54 +0000 Subject: [PATCH 0926/1098] ARM: omap: allow building omap44xx without SMP The new omap4 cpuidle implementation currently requires ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP. This patch makes it possible to build a non-SMP kernel for that platform. This is not normally desired for end-users but can be useful for testing. Without this patch, building rand-0y2jSKT results in: drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke': drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration] It's not clear if this patch is the best solution for the problem at hand. I have made sure that we can now build the kernel in all configurations, but that does not mean it will actually work on an OMAP44xx. Signed-off-by: Arnd Bergmann Acked-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Cc: Kevin Hilman Cc: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 2 +- arch/arm/mach-omap2/cpuidle44xx.c | 3 ++- include/linux/cpuidle.h | 4 ++++ 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..66a8be331caf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc61..288bee6cbb76 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 040b13b5c14a..279b1eaa8b73 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#else +static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ +} #endif /****************************** From a28eecef8ac2671dce7d892165bf374eeaa04e15 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 21:56:39 +0000 Subject: [PATCH 0927/1098] ARM: imx: build pm-imx5 code only when PM is enabled This moves the imx5 pm code out of the list of unconditionally compiled files for imx5, mirroring what we already do for imx6 and how it was done before the code was move from mach-mx5 to mach-imx in v3.3. Without this patch, building with CONFIG_PM disabled results in: arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cf..e08adb7b8dd5 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o From 9f9ba0fdecff64ffc6986645216ffc3a8b664f08 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:42:50 +0000 Subject: [PATCH 0928/1098] ARM: imx: fix ksz9021rn_phy_fixup The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to set up an ethernet phy if they can. They do check whether phylib is enabled, but unfortunately the functions can only be called from platform code if phylib is builtin, not if it is a module Without this patch, building with a modular phylib results in: arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init': arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function) arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in The bug was originally reported by Artem Bityutskiy but only partially fixed in ef441806 "ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled". Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Artem Bityutskiy Cc: Sascha Hauer --- arch/arm/mach-imx/mach-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a76..045b3f6a387d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); From f637c4c9405e21f44cf0045eaf77eddd3a79ca5a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 10:40:40 +0000 Subject: [PATCH 0929/1098] ARM: imx: select CPU_FREQ_TABLE when needed The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: Yong Shen Cc: stable@vger.kernel.org --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..84b5a0cb7a5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2150,6 +2150,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. From 1fc593feaf8e440511f381f4cdff483b55bbf546 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Aug 2012 00:16:08 +0000 Subject: [PATCH 0930/1098] ARM: imx: build i.MX6 functions only when needed The head-v7.S contains a call to the generic cpu_suspend function, which is only available when selected by the i.MX6 code. As pointed out by Shawn Guo, i.MX5 does not actually use any functions defined in head-v7.S. It is also needed only for the i.MX6 power management code and for the SMP code, so we can restrict building this file to situations in which at least one of those two is present. Finally, other platforms with a similar file call it headsmp.S, so we can rename it to the same for consistency. Without this patch, building imx5 standalone results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Eric Miao Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 7 +++---- arch/arm/mach-imx/{head-v7.S => headsmp.S} | 0 2 files changed, 3 insertions(+), 4 deletions(-) rename arch/arm/mach-imx/{head-v7.S => headsmp.S} (100%) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e08adb7b8dd5..d004d37ad9d8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -71,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S similarity index 100% rename from arch/arm/mach-imx/head-v7.S rename to arch/arm/mach-imx/headsmp.S From db43b184685632b7c23ccd47ec08b61010d55798 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 20:34:48 +0000 Subject: [PATCH 0931/1098] ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann Cc: Linus Walleij Cc: Lee Jones --- arch/arm/configs/u8500_defconfig | 1 + arch/arm/mach-ux500/Kconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6..da6845493caa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79cac..53d3d46dec12 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. From 823f74733d8f89eaabfb25f93680fb7e05861348 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:24 -0500 Subject: [PATCH 0932/1098] powerpc/fsl: update defconfigs run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 30 ++++++------------- arch/powerpc/configs/corenet32_smp_defconfig | 30 ++++++------------- arch/powerpc/configs/mpc83xx_defconfig | 17 +++-------- arch/powerpc/configs/mpc85xx_defconfig | 31 +++++--------------- arch/powerpc/configs/mpc85xx_smp_defconfig | 31 +++++--------------- 5 files changed, 36 insertions(+), 103 deletions(-) diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e7..a79b0a9316a5 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -67,7 +66,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +78,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +95,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +119,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +145,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234fd..f085699dab7c 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -77,17 +76,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +111,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +126,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +135,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +161,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53b..e116dc9e8a2e 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -44,8 +43,6 @@ CONFIG_INET_ESP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +61,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +108,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 99a4dd3b30cc..a036a622be5a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -78,32 +80,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -135,7 +125,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -184,7 +173,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -230,18 +218,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908f..4ba5255232bc 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -81,32 +83,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +127,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +220,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y From 1267643dc311e860e728dbd09a97c2e0a773bfdb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:30 -0500 Subject: [PATCH 0933/1098] powerpc/fsl: fix "Failed to mount /dev: No such device" errors Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 1 + arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/configs/corenet64_smp_defconfig | 1 + arch/powerpc/configs/mpc83xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_smp_defconfig | 1 + 6 files changed, 6 insertions(+) diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index a79b0a9316a5..26e541c4662b 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -62,6 +62,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f085699dab7c..8b3d57c1ebe8 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -69,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7f..0516e22ca3de 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index e116dc9e8a2e..9352e4430c3b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -41,6 +41,7 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a036a622be5a..8b5bda27d248 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -76,6 +76,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4ba5255232bc..b0974e7e98ae 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -79,6 +79,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y From a0dfb2634e5671770f598cda08002d8cda66ac77 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Thu, 23 Aug 2012 19:51:21 +0800 Subject: [PATCH 0934/1098] af_packet: match_fanout_group() can be static cc: Eric Leblond Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller --- net/packet/af_packet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index aee7196aac36..c5c9e2a54218 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1273,7 +1273,7 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po) spin_unlock(&f->lock); } -bool match_fanout_group(struct packet_type *ptype, struct sock * sk) +static bool match_fanout_group(struct packet_type *ptype, struct sock * sk) { if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout) return true; From 0ff9514b579b4f2f3e6038cd961ce64c224c3c73 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Aug 2012 10:53:08 -0600 Subject: [PATCH 0935/1098] PCI: Don't print anything while decoding is disabled If we try to print to the console device while its decoding is disabled, the system will hang. Reported-and-tested-by: Olof Johansson Signed-off-by: Bjorn Helgaas Acked-by: Olof Johansson --- drivers/pci/probe.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 6c143b4497ca..9f8a6b79a8ec 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) case PCI_BASE_ADDRESS_MEM_TYPE_32: break; case PCI_BASE_ADDRESS_MEM_TYPE_1M: - dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n"); + /* 1M mem BAR treated as 32-bit BAR */ break; case PCI_BASE_ADDRESS_MEM_TYPE_64: flags |= IORESOURCE_MEM_64; break; default: - dev_warn(&dev->dev, - "mem unknown type %x treated as 32-bit BAR\n", - mem_type); + /* mem unknown type treated as 32-bit BAR */ break; } return flags; @@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, u32 l, sz, mask; u16 orig_cmd; struct pci_bus_region region; + bool bar_too_big = false, bar_disabled = false; mask = type ? PCI_ROM_ADDRESS_MASK : ~0; + /* No printks while decoding is disabled! */ if (!dev->mmio_always_on) { pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); pci_write_config_word(dev, PCI_COMMAND, @@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, goto fail; if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) { - dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", - pos); + bar_too_big = true; goto fail; } @@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = 0; region.end = sz64; pcibios_bus_to_resource(dev, res, ®ion); + bar_disabled = true; } else { region.start = l64; region.end = l64 + sz64; pcibios_bus_to_resource(dev, res, ®ion); - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", - pos, res); } } else { sz = pci_size(l, sz, mask); @@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, region.start = l; region.end = l + sz; pcibios_bus_to_resource(dev, res, ®ion); - - dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } - out: + goto out; + + +fail: + res->flags = 0; +out: if (!dev->mmio_always_on) pci_write_config_word(dev, PCI_COMMAND, orig_cmd); + if (bar_too_big) + dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos); + if (res->flags && !bar_disabled) + dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); + return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; - fail: - res->flags = 0; - goto out; } static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) From 0b9e3f6d84ce619f697bb622d9165cccaa93d67c Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 31 Jul 2012 14:55:51 +1000 Subject: [PATCH 0936/1098] xfs: fix uninitialised variable in xfs_rtbuf_get() Results in this assert failure in generic/090: XFS: Assertion failed: *nmap >= 1, file: fs/xfs/xfs_bmap.c, line: 4363 ..... Call Trace: [] xfs_bmapi_read+0x6b/0x370 [] xfs_rtbuf_get+0x42/0x130 [] xfs_rtget_summary+0x89/0x120 [] xfs_rtallocate_extent_size+0xce/0x340 [] xfs_rtallocate_extent+0x240/0x290 [] xfs_bmap_rtalloc+0x1ba/0x340 [] xfs_bmap_alloc+0x35/0x40 [] xfs_bmapi_allocate+0xf1/0x350 [] xfs_bmapi_write+0x66e/0xa60 [] xfs_iomap_write_direct+0x22a/0x3f0 [] __xfs_get_blocks+0x38b/0x5d0 [] xfs_get_blocks_direct+0x14/0x20 [] do_blockdev_direct_IO+0xf71/0x1eb0 [] __blockdev_direct_IO+0x55/0x60 [] xfs_vm_direct_IO+0x11a/0x1e0 [] generic_file_direct_write+0xd7/0x1b0 [] xfs_file_dio_aio_write+0x13c/0x320 [] xfs_file_aio_write+0x1c2/0x1d0 [] do_sync_write+0xa7/0xe0 [] vfs_write+0xa8/0x160 [] sys_pwrite64+0x92/0xb0 [] system_call_fastpath+0x16/0x1b Signed-off-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_rtalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index 92d4331cd4f1..ca28a4ba4b54 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -857,7 +857,7 @@ xfs_rtbuf_get( xfs_buf_t *bp; /* block buffer, result */ xfs_inode_t *ip; /* bitmap or summary inode */ xfs_bmbt_irec_t map; - int nmap; + int nmap = 1; int error; /* error value */ ip = issum ? mp->m_rsumip : mp->m_rbmip; From 761290309939743ddf97e2bd94c6da18c6436b79 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Aug 2012 02:02:02 -0400 Subject: [PATCH 0937/1098] xfs: unlock the AGI buffer when looping in xfs_dialloc Also update some commens in the area to make the code easier to read. Signed-off-by: Christoph Hellwig Reviewed-by: Mark Tinguely Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_ialloc.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index 21e37b55f7e5..5aceb3f8ecd6 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -962,23 +962,22 @@ xfs_dialloc( if (!pag->pagi_freecount && !okalloc) goto nextag; + /* + * Then read in the AGI buffer and recheck with the AGI buffer + * lock held. + */ error = xfs_ialloc_read_agi(mp, tp, agno, &agbp); if (error) goto out_error; - /* - * Once the AGI has been read in we have to recheck - * pagi_freecount with the AGI buffer lock held. - */ if (pag->pagi_freecount) { xfs_perag_put(pag); goto out_alloc; } - if (!okalloc) { - xfs_trans_brelse(tp, agbp); - goto nextag; - } + if (!okalloc) + goto nextag_relse_buffer; + error = xfs_ialloc_ag_alloc(tp, agbp, &ialloced); if (error) { @@ -1007,6 +1006,8 @@ xfs_dialloc( return 0; } +nextag_relse_buffer: + xfs_trans_brelse(tp, agbp); nextag: xfs_perag_put(pag); if (++agno == mp->m_sb.sb_agcount) From a672e1be30d5bc848cd0067c55ed29b2015b7c17 Mon Sep 17 00:00:00 2001 From: Tomas Racek Date: Tue, 14 Aug 2012 10:35:04 +0200 Subject: [PATCH 0938/1098] xfs: check for possible overflow in xfs_ioc_trim If range.start or range.minlen is bigger than filesystem size, return invalid value error. This fixes possible overflow in BTOBB macro when passed value was nearly ULLONG_MAX. Signed-off-by: Tomas Racek Reviewed-by: Dave Chinner Signed-off-by: Ben Myers --- fs/xfs/xfs_discard.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c index f9c3fe304a17..69cf4fcde03e 100644 --- a/fs/xfs/xfs_discard.c +++ b/fs/xfs/xfs_discard.c @@ -179,12 +179,14 @@ xfs_ioc_trim( * used by the fstrim application. In the end it really doesn't * matter as trimming blocks is an advisory interface. */ + if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) || + range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp))) + return -XFS_ERROR(EINVAL); + start = BTOBB(range.start); end = start + BTOBBT(range.len) - 1; minlen = BTOBB(max_t(u64, granularity, range.minlen)); - if (XFS_BB_TO_FSB(mp, start) >= mp->m_sb.sb_dblocks) - return -XFS_ERROR(EINVAL); if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1) end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1; From 22f5d115a2b087c977128f84ee557ad71530330e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 14 Aug 2012 10:53:38 +0000 Subject: [PATCH 0939/1098] drm: Initialize object type when using DRM_MODE() macro MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DRM_MODE() macro doesn't initialize the type of the base drm object. When a copy is made of the mode, the object type is overwritten with zero, and the the object can no longer be found by drm_mode_object_find() due to the type check failing. Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_crtc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index ced362533e3c..bfacf0d5a225 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -118,7 +118,8 @@ enum drm_mode_status { .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ - .vscan = (vs), .flags = (f), .vrefresh = 0 + .vscan = (vs), .flags = (f), .vrefresh = 0, \ + .base.type = DRM_MODE_OBJECT_MODE #define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ From 7c4eaca4162d0b5ad4fb39f974d7ffd71b9daa09 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Thu, 16 Aug 2012 08:29:03 +0000 Subject: [PATCH 0940/1098] drm: Check for invalid cursor flags Signed-off-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 2 +- include/drm/drm_mode.h | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 08a7aa722d6b..6fbfc244748f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1981,7 +1981,7 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; - if (!req->flags) + if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags)) return -EINVAL; mutex_lock(&dev->mode_config.mutex); diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index 5581980b14f6..3d6301b6ec16 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -359,8 +359,9 @@ struct drm_mode_mode_cmd { struct drm_mode_modeinfo mode; }; -#define DRM_MODE_CURSOR_BO (1<<0) -#define DRM_MODE_CURSOR_MOVE (1<<1) +#define DRM_MODE_CURSOR_BO 0x01 +#define DRM_MODE_CURSOR_MOVE 0x02 +#define DRM_MODE_CURSOR_FLAGS 0x03 /* * depending on the value in flags different members are used. From ac70b2e9a13423b5efa0178e081936ce6979aea5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 15 Aug 2012 18:09:15 +0100 Subject: [PATCH 0941/1098] sfc: Fix reporting of IPv4 full filters through ethtool ETHTOOL_GRXCLSRULE returns filters for a TCP/IPv4 or UDP/IPv4 4-tuple with source and destination swapped. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 8cba2df82b18..5faedd855b77 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -863,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx, &ip_entry->ip4dst, &ip_entry->pdst); if (rc != 0) { rc = efx_filter_get_ipv4_full( - &spec, &proto, &ip_entry->ip4src, &ip_entry->psrc, - &ip_entry->ip4dst, &ip_entry->pdst); + &spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst, + &ip_entry->ip4src, &ip_entry->psrc); EFX_WARN_ON_PARANOID(rc); ip_mask->ip4src = ~0; ip_mask->psrc = ~0; From ef813c412c0cf254ddce7d922289e2d6a69960f0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Wed, 8 Aug 2012 19:15:01 +0400 Subject: [PATCH 0942/1098] can: softing: Fix potential memory leak in softing_load_fw() Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Marc Kleine-Budde --- drivers/net/can/softing/softing_fw.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 310596175676..b595d3422b9f 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card, const uint8_t *mem, *end, *dat; uint16_t type, len; uint32_t addr; - uint8_t *buf = NULL; + uint8_t *buf = NULL, *new_buf; int buflen = 0; int8_t type_end = 0; @@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card, if (len > buflen) { /* align buflen */ buflen = (len + (1024-1)) & ~(1024-1); - buf = krealloc(buf, buflen, GFP_KERNEL); - if (!buf) { + new_buf = krealloc(buf, buflen, GFP_KERNEL); + if (!new_buf) { ret = -ENOMEM; goto failed; } + buf = new_buf; } /* verify record data */ memcpy_fromio(buf, &dpram[addr + offset], len); From da3d50ef308d53f216f1f92f4971f245c13e9f65 Mon Sep 17 00:00:00 2001 From: Sven Schmitt Date: Thu, 9 Aug 2012 14:46:34 +0200 Subject: [PATCH 0943/1098] can: sja1000_platform: fix wrong flag IRQF_SHARED for interrupt sharing The sja1000 platform driver wrongly assumes that a shared IRQ is indicated with the IRQF_SHARED flag in irq resource flags. This patch changes the driver to handle the correct flag IORESOURCE_IRQ_SHAREABLE instead. There are no mainline users of the platform driver which wrongly make use of IRQF_SHARED. Signed-off-by: Sven Schmitt Acked-by: Yegor Yefremov Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000_platform.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c index 4f50145f6483..662c5f7eb0c5 100644 --- a/drivers/net/can/sja1000/sja1000_platform.c +++ b/drivers/net/can/sja1000/sja1000_platform.c @@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev) priv = netdev_priv(dev); dev->irq = res_irq->start; - priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED); + priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK; + if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irq_flags |= IRQF_SHARED; priv->reg_base = addr; /* The CAN clock frequency is half the oscillator clock frequency */ priv->can.clock.freq = pdata->osc_freq / 2; From 9a0f938bde74bf9e50bd75c8de9e38c1787398cd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 24 Aug 2012 09:12:22 +0100 Subject: [PATCH 0944/1098] drm/i915: Use the correct size of the GTT for placing the per-process entries The current layout is to place the per-process tables at the end of the GTT. However, this is currently using a hardcoded maximum size for the GTT and not taking in account limitations imposed by the BIOS. Use the value for the total number of entries allocated in the table as provided by the configuration registers. Reported-by: Matthew Garrett Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Ben Widawsky Cc: Matthew Garret Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index d9a5372ec56f..60815b861ec2 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -72,7 +72,7 @@ int i915_gem_init_aliasing_ppgtt(struct drm_device *dev) /* ppgtt PDEs reside in the global gtt pagetable, which has 512*1024 * entries. For aliasing ppgtt support we just steal them at the end for * now. */ - first_pd_entry_in_global_pt = 512*1024 - I915_PPGTT_PD_ENTRIES; + first_pd_entry_in_global_pt = dev_priv->mm.gtt->gtt_total_entries - I915_PPGTT_PD_ENTRIES; ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL); if (!ppgtt) From ca5dd3954a62dc14c2afff1c34b3b5d8dc74f777 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:12 +0000 Subject: [PATCH 0945/1098] powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c5..013f28668781 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -2148,40 +2149,23 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); + printf("Error dumping printk buffer!\n"); return; } catch_memory_errors = 1; sync(); - addr = kallsyms_lookup_name("__log_buf"); - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - - if (strlen(buf) < size) - break; - - addr += size; - } - } + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } sync(); /* wait a little while to see if we get a machine check */ From e3bc8049e524f13e09a58f5bad70b6738494277a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:13 +0000 Subject: [PATCH 0946/1098] powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 013f28668781..9b49c65ee7a4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -895,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1098,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b [cnt] set breakpoint at given instr addr\n" @@ -1194,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1360,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1624,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1784,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1799,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2065,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2073,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2153,13 +2153,13 @@ dump_log_buf(void) unsigned char buf[128]; size_t len; - if (setjmp(bus_error_jmp) != 0) { + if (setjmp(bus_error_jmp) != 0) { printf("Error dumping printk buffer!\n"); - return; - } + return; + } - catch_memory_errors = 1; - sync(); + catch_memory_errors = 1; + sync(); kmsg_dump_rewind_nolock(&dumper); while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { @@ -2167,10 +2167,10 @@ dump_log_buf(void) printf("%s", buf); } - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* From 6d9c00c67b4768105e8ae3d213484095c744eea8 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 22 Aug 2012 20:30:43 +0000 Subject: [PATCH 0947/1098] powerpc: Fix null pointer deref in perf hardware breakpoints Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/hw_breakpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61db..956a4c496de9 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } From 46c5c59e6902855b61a31be1b8e26bfffcae1e07 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Aug 2012 15:35:47 +0000 Subject: [PATCH 0948/1098] powerpc/mpic_msgr: Add missing includes Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood Cc: Meador Inge Cc: Jia Hongtao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic_msgr.h | 1 + arch/powerpc/sysdev/mpic_msgr.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55cd..d4f471fb1031 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include #include #include +#include struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8b..e961f8c4a8f0 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include #include #include +#include +#include +#include #include #include #include From 572b411cb4f1b208bb8ea278752f956b3554371e Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:18 +0000 Subject: [PATCH 0949/1098] powerpc/kgdb: Do not set kgdb_single_step on ppc The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng Signed-off-by: Jason Wessel Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f0..bbabc5abb1c4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -410,7 +410,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } From 949616cf2d3095d1bb6b3d155c1cc963abd98b5c Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:19 +0000 Subject: [PATCH 0950/1098] powerpc/kgdb: Bail out of KGDB when we've been triggered We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index bbabc5abb1c4..05adb69febf4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -101,6 +101,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); From 5f630401f9e98bd062733b5bbef096dbf2158066 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:20 +0000 Subject: [PATCH 0951/1098] powerpc/kgdb: Restore current_thread_info properly For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 05adb69febf4..c470a40b29f5 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * This table contains the mapping between PowerPC hardware trap types, and @@ -153,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -170,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } From f0f0c9ac2051e5da4afa1f3f908ace197a4de80e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 21 Aug 2012 21:22:22 +0000 Subject: [PATCH 0952/1098] powerpc: Remove unnecessary ifdefs Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputable.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037f..b3c083de17ad 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ From 4c374af5fdee4bc6b4f5ea96c1a0f0ad7d3566be Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 18 Aug 2012 07:34:15 +0000 Subject: [PATCH 0953/1098] powerpc/dma-iommu: Fix IOMMU window check Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dma-iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced136..e4897523de41 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; From 7256a5d2da56f2ea8ad49e8dbe9e2984f0899b42 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 13 Aug 2012 03:18:28 +0000 Subject: [PATCH 0954/1098] powerpc: Fix personality handling in ppc64_personality() Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/syscalls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faecc..4e3cc47f26b9 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif From dad477ccd65f05bf3b5a874e0118bf4156a1fcbb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:50:46 +0000 Subject: [PATCH 0955/1098] powerpc: POWER7 copy_to_user/copy_from_user patch applied twice "powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 31 ------------------------------ 1 file changed, 31 deletions(-) diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606e..4a4a46fbad0e 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -316,37 +316,6 @@ err1; stb r0,0(r3) lis r8,0x8000 /* GO=1 */ clrldi r8,r8,32 -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - .machine push .machine "power4" dcbt r0,r6,0b01000 From 2fae7cdb60240e2e2d9b378afbf6d9fcce8a3890 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:51:41 +0000 Subject: [PATCH 0956/1098] powerpc: Fix VMX in interrupt check in POWER7 copy loops The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 4 ++-- arch/powerpc/lib/memcpy_power7.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 4a4a46fbad0e..0d24ff15f5f6 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,7 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc716..7ba6c96de778 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a From 813312110bede27bffd082c25cd31730bd567beb Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 7 Aug 2012 15:07:19 +0000 Subject: [PATCH 0957/1098] powerpc/perf: Use pmc_overflow() to detect rolled back events For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include #include main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d3..7cd2dbd6e4c4 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); From 2c39bf49fd05305bea6d70670855047b2191d3f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 24 Aug 2012 20:55:55 +1000 Subject: [PATCH 0958/1098] Revert "powerpc: Update g5_defconfig" This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 103 +++++++++++++++++++++--------- 1 file changed, 73 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e2..07b7f2af2dca 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m From a51d4ed01e5bb39d2cf36a12f9976ab08872c192 Mon Sep 17 00:00:00 2001 From: Calvin Walton Date: Fri, 24 Aug 2012 07:56:31 -0400 Subject: [PATCH 0959/1098] i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard This board is incorrectly detected as having an LVDS connector, resulting in the VGA output (the only available output on the board) showing the console only in the top-left 1024x768 pixels, and an extra LVDS connector appearing in X. It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10 chipset. I've had this board for about a year, but this is the first time I noticed the issue because I've been running it headless for most of its life. Signed-off-by: Calvin Walton --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e05c0d3e3440..e9a6f6aaed85 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -780,6 +780,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Gigabyte GA-D525TUD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "D525TUD"), + }, + }, { } /* terminating entry */ }; From 78df76a065ae3b5dbcb9a29912adc02f697de498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 Aug 2012 05:40:47 +0000 Subject: [PATCH 0960/1098] ipv4: take rt_uncached_lock only if needed Multicast traffic allocates dst with DST_NOCACHE, but dst is not inserted into rt_uncached_list. This slowdown multicast workloads on SMP because rt_uncached_lock is contended. Change the test before taking the lock to actually check the dst was inserted into rt_uncached_list. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 8c8c748ebb28..24fd4c596643 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1263,7 +1263,7 @@ static void ipv4_dst_destroy(struct dst_entry *dst) { struct rtable *rt = (struct rtable *) dst; - if (dst->flags & DST_NOCACHE) { + if (!list_empty(&rt->rt_uncached)) { spin_lock_bh(&rt_uncached_lock); list_del(&rt->rt_uncached); spin_unlock_bh(&rt_uncached_lock); From bd4242dfe85470b9caecbd049310518f9b9e3f14 Mon Sep 17 00:00:00 2001 From: Rayagond Kokatanur Date: Wed, 22 Aug 2012 21:28:18 +0000 Subject: [PATCH 0961/1098] stmmac: add header inclusion protection This patch adds "#ifndef __
_H" for protecting header from double inclusion. Signed-off-by: Rayagond Kokatanur Hacked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/descs.h | 6 ++++++ drivers/net/ethernet/stmicro/stmmac/descs_com.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/dwmac100.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 3 +++ drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/mmc.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 5 +++++ drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h | 4 ++++ 9 files changed, 43 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e2d083228f3a..719be3912aa9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __COMMON_H__ +#define __COMMON_H__ + #include #include #include @@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable); extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr); extern const struct stmmac_ring_mode_ops ring_mode_ops; + +#endif /* __COMMON_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 9820ec842cc0..223adf95fd03 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -20,6 +20,10 @@ Author: Giuseppe Cavallaro *******************************************************************************/ + +#ifndef __DESCS_H__ +#define __DESCS_H__ + struct dma_desc { /* Receive descriptor */ union { @@ -166,3 +170,5 @@ enum tdes_csum_insertion { * is not calculated */ cic_full = 3, /* IP header and pseudoheader */ }; + +#endif /* __DESCS_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h index dd8d6e19dff6..7ee9499a6e38 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h @@ -27,6 +27,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DESC_COM_H__ +#define __DESC_COM_H__ + #if defined(CONFIG_STMMAC_RING) static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end) { @@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len) p->des01.tx.buffer1_size = len; } #endif + +#endif /* __DESC_COM_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h index 7c6d857a9cc7..2ec6aeae349e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC100_H__ +#define __DWMAC100_H__ + #include #include "common.h" @@ -119,3 +122,5 @@ enum ttc_control { #define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */ extern const struct stmmac_dma_ops dwmac100_dma_ops; + +#endif /* __DWMAC100_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index b4c44a587f02..0e4cacedc1f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -19,6 +19,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC1000_H__ +#define __DWMAC1000_H__ #include #include "common.h" @@ -232,3 +234,4 @@ enum rtc_control { #define DWMAC_CORE_3_40 0x34 extern const struct stmmac_dma_ops dwmac1000_dma_ops; +#endif /* __DWMAC1000_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index e678ce39d014..e49c9a0fd6ff 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __DWMAC_DMA_H__ +#define __DWMAC_DMA_H__ + /* DMA CRS Control and Status Register Mapping */ #define DMA_BUS_MODE 0x00001000 /* Bus Mode */ #define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */ @@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr); extern void dwmac_dma_stop_rx(void __iomem *ioaddr); extern int dwmac_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x); + +#endif /* __DWMAC_DMA_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index a38352024cb8..67995ef25251 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -22,6 +22,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __MMC_H__ +#define __MMC_H__ + /* MMC control register */ /* When set, all counter are reset */ #define MMC_CNTRL_COUNTER_RESET 0x1 @@ -129,3 +132,5 @@ struct stmmac_counters { extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode); extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr); extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc); + +#endif /* __MMC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index f2d3665430ad..e872e1da3137 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -20,6 +20,9 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_H__ +#define __STMMAC_H__ + #define STMMAC_RESOURCE_NAME "stmmaceth" #define DRV_MODULE_VERSION "March_2012" @@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void) { } #endif /* CONFIG_STMMAC_PCI */ + +#endif /* __STMMAC_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h index 6863590d184b..aea9b14cdfbe 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h @@ -21,6 +21,8 @@ Author: Giuseppe Cavallaro *******************************************************************************/ +#ifndef __STMMAC_TIMER_H__ +#define __STMMAC_TIMER_H__ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); @@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev); extern int tmu2_register_user(void *fnt, void *data); extern void tmu2_unregister_user(void); #endif + +#endif /* __STMMAC_TIMER_H__ */ From 20e1db19db5d6b9e4e83021595eab0dc8f107bef Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 23 Aug 2012 02:09:11 +0000 Subject: [PATCH 0962/1098] netlink: fix possible spoofing from non-root processes Non-root user-space processes can send Netlink messages to other processes that are well-known for being subscribed to Netlink asynchronous notifications. This allows ilegitimate non-root process to send forged messages to Netlink subscribers. The userspace process usually verifies the legitimate origin in two ways: a) Socket credentials. If UID != 0, then the message comes from some ilegitimate process and the message needs to be dropped. b) Netlink portID. In general, portID == 0 means that the origin of the messages comes from the kernel. Thus, discarding any message not coming from the kernel. However, ctnetlink sets the portID in event messages that has been triggered by some user-space process, eg. conntrack utility. So other processes subscribed to ctnetlink events, eg. conntrackd, know that the event was triggered by some user-space action. Neither of the two ways to discard ilegitimate messages coming from non-root processes can help for ctnetlink. This patch adds capability validation in case that dst_pid is set in netlink_sendmsg(). This approach is aggressive since existing applications using any Netlink bus to deliver messages between two user-space processes will break. Note that the exception is NETLINK_USERSOCK, since it is reserved for netlink-to-netlink userspace communication. Still, if anyone wants that his Netlink bus allows netlink-to-netlink userspace, then they can set NL_NONROOT_SEND. However, by default, I don't think it makes sense to allow to use NETLINK_ROUTE to communicate two processes that are sending no matter what information that is not related to link/neighbouring/routing. They should be using NETLINK_USERSOCK instead for that. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 1445d73533ed..527023823b5c 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1373,7 +1373,8 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock, dst_pid = addr->nl_pid; dst_group = ffs(addr->nl_groups); err = -EPERM; - if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND)) + if ((dst_group || dst_pid) && + !netlink_capable(sock, NL_NONROOT_SEND)) goto out; } else { dst_pid = nlk->dst_pid; @@ -2147,6 +2148,7 @@ static void __init netlink_add_usersock_entry(void) rcu_assign_pointer(nl_table[NETLINK_USERSOCK].listeners, listeners); nl_table[NETLINK_USERSOCK].module = THIS_MODULE; nl_table[NETLINK_USERSOCK].registered = 1; + nl_table[NETLINK_USERSOCK].nl_nonroot = NL_NONROOT_SEND; netlink_table_ungrab(); } From 7c4a56fec379ac0d7754e0d4da6a7361f1a4fe64 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 23 Aug 2012 07:05:17 +0000 Subject: [PATCH 0963/1098] tcp: fix cwnd reduction for non-sack recovery The cwnd reduction in fast recovery is based on the number of packets newly delivered per ACK. For non-sack connections every DUPACK signifies a packet has been delivered, but the sender mistakenly skips counting them for cwnd reduction. The fix is to compute newly_acked_sacked after DUPACKs are accounted in sacked_out for non-sack connections. Signed-off-by: Yuchung Cheng Acked-by: Nandita Dukkipati Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 85308b90df80..6e38c6c23caa 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2926,13 +2926,14 @@ static void tcp_enter_recovery(struct sock *sk, bool ece_ack) * tcp_xmit_retransmit_queue(). */ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, - int newly_acked_sacked, bool is_dupack, + int prior_sacked, bool is_dupack, int flag) { struct inet_connection_sock *icsk = inet_csk(sk); struct tcp_sock *tp = tcp_sk(sk); int do_lost = is_dupack || ((flag & FLAG_DATA_SACKED) && (tcp_fackets_out(tp) > tp->reordering)); + int newly_acked_sacked = 0; int fast_rexmit = 0; if (WARN_ON(!tp->packets_out && tp->sacked_out)) @@ -2992,6 +2993,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, tcp_add_reno_sack(sk); } else do_lost = tcp_try_undo_partial(sk, pkts_acked); + newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; break; case TCP_CA_Loss: if (flag & FLAG_DATA_ACKED) @@ -3013,6 +3015,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, if (is_dupack) tcp_add_reno_sack(sk); } + newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked; if (icsk->icsk_ca_state <= TCP_CA_Disorder) tcp_try_undo_dsack(sk); @@ -3590,7 +3593,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) int prior_packets; int prior_sacked = tp->sacked_out; int pkts_acked = 0; - int newly_acked_sacked = 0; bool frto_cwnd = false; /* If the ack is older than previous acks @@ -3666,8 +3668,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una); pkts_acked = prior_packets - tp->packets_out; - newly_acked_sacked = (prior_packets - prior_sacked) - - (tp->packets_out - tp->sacked_out); if (tp->frto_counter) frto_cwnd = tcp_process_frto(sk, flag); @@ -3681,7 +3681,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_may_raise_cwnd(sk, flag)) tcp_cong_avoid(sk, ack, prior_in_flight); is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP)); - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); } else { if ((flag & FLAG_DATA_ACKED) && !frto_cwnd) @@ -3698,7 +3698,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) no_queue: /* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag & FLAG_DSACKING_ACK) - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); /* If this ack opens up a zero window, clear backoff. It was * being used to time the probes, and is probably far higher than @@ -3718,8 +3718,7 @@ old_ack: */ if (TCP_SKB_CB(skb)->sacked) { flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una); - newly_acked_sacked = tp->sacked_out - prior_sacked; - tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked, + tcp_fastretrans_alert(sk, pkts_acked, prior_sacked, is_dupack, flag); } From 2d85b9494d10501f20ebf043f8d599e45736d78f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Jul 2012 15:26:08 +0200 Subject: [PATCH 0964/1098] ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..a002504e3236 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -523,10 +523,10 @@ static struct platform_device hdmi_lcdc_device = { #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3"), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { From 5c1d2d16772e2d7d4e2e8da99a92d6f50b9102f0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Jul 2012 15:26:09 +0200 Subject: [PATCH 0965/1098] ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index a002504e3236..65cb7936ed9e 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,10 +520,11 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), From d17d794c63e2dc0a5b1ffc8367c9475880427fc7 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 23 Aug 2012 15:11:52 -0400 Subject: [PATCH 0966/1098] libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry commit d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB. Signed-off-by: Prarit Bhargava Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5eee1c1537d2..8e1039c8e159 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4062,7 +4062,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, - { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, + { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, From 760a9a30adc558a75916a13902f38c6792fa8c4b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Aug 2012 14:34:11 +0100 Subject: [PATCH 0967/1098] kvm: Fix nonsense handling of compat ioctl KVM_SET_SIGNAL_MASK passed a NULL argument leaves the on stack signal sets uninitialized. It then passes them through to kvm_vcpu_ioctl_set_sigmask. We should be passing a NULL in this case not translated garbage. Signed-off-by: Alan Cox Signed-off-by: Marcelo Tosatti --- virt/kvm/kvm_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 246852397e30..d617f69131d7 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1976,9 +1976,10 @@ static long kvm_vcpu_compat_ioctl(struct file *filp, if (copy_from_user(&csigset, sigmask_arg->sigset, sizeof csigset)) goto out; - } - sigset_from_compat(&sigset, &csigset); - r = kvm_vcpu_ioctl_set_sigmask(vcpu, &sigset); + sigset_from_compat(&sigset, &csigset); + r = kvm_vcpu_ioctl_set_sigmask(vcpu, &sigset); + } else + r = kvm_vcpu_ioctl_set_sigmask(vcpu, NULL); break; } default: From 51a6149b89b822cacf572b2ca2a15cb6f2232b11 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 23 Aug 2012 15:05:07 +0200 Subject: [PATCH 0968/1098] ARM: at91/feature-removal-schedule: delay at91_mci removal Delay sd/mmc driver at91_mci.c removal because of tight schedule to move platform data to new driver atmel-mci. Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- Documentation/feature-removal-schedule.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index afaff312bf41..f4d8c7105fcd 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more ---------------------------- What: at91-mci driver ("CONFIG_MMC_AT91") -When: 3.7 +When: 3.8 Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support was added to atmel-mci as a first step to support more chips. Then at91-mci was kept only for old IP versions (on at91rm9200 and From 67ddbb3e6568fb1820b2cc45b00c50702b114801 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 23 Aug 2012 10:51:55 -0400 Subject: [PATCH 0969/1098] HID: add NOGET quirk for Eaton Ellipse MAX UPS This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS device. (The USB IDs were already present in hid-ids.h, apparently under a different name.) Signed-off-by: Alan Stern Reported-by: Laurent Bigonville CC: Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 903eef3d3e10..991e85c7325c 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -70,6 +70,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS }, { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS }, From 1d92128fe9e30c2340283361957a840f108e4abf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Aug 2012 18:00:29 +0300 Subject: [PATCH 0970/1098] KVM: x86: fix KVM_GET_MSR for PV EOI KVM_GET_MSR was missing support for PV EOI, which is needed for migration. Signed-off-by: Michael S. Tsirkin Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index dce75b760312..148ed666e311 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2000,6 +2000,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_KVM_STEAL_TIME: data = vcpu->arch.st.msr_val; break; + case MSR_KVM_PV_EOI_EN: + data = vcpu->arch.pv_eoi.msr_val; + break; case MSR_IA32_P5_MC_ADDR: case MSR_IA32_P5_MC_TYPE: case MSR_IA32_MCG_CAP: From 6b79d14e7a9f5d31b78bcd01a122f0c692e94a19 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 27 Aug 2012 10:59:42 +0200 Subject: [PATCH 0971/1098] s390/dasd: fix ioctl return value For unimplemented ioctls the dasd driver should return -ENOTTY. Reported-by: Wanlong Gao Acked-by: Stefan Weinhuber Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_eckd.c | 2 +- drivers/s390/block/dasd_ioctl.c | 7 ++----- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 40a826a7295f..2fb2b9ea97ec 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -3804,7 +3804,7 @@ dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp) case BIODASDSYMMIO: return dasd_symm_io(device, argp); default: - return -ENOIOCTLCMD; + return -ENOTTY; } } diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index cceae70279f6..654c6921a6d4 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -498,12 +498,9 @@ int dasd_ioctl(struct block_device *bdev, fmode_t mode, break; default: /* if the discipline has an ioctl method try it. */ - if (base->discipline->ioctl) { + rc = -ENOTTY; + if (base->discipline->ioctl) rc = base->discipline->ioctl(block, cmd, argp); - if (rc == -ENOIOCTLCMD) - rc = -EINVAL; - } else - rc = -EINVAL; } dasd_put_device(base); return rc; From 29a877fa1f402ce2c1a0c52957c4e29b9bb34216 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 27 Aug 2012 15:18:45 +0200 Subject: [PATCH 0972/1098] s390/smp: add missing smp_store_status() for !SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this compile error: arch/s390/kernel/machine_kexec.c: In function ‘setup_regs’: arch/s390/kernel/machine_kexec.c:63:3: error: implicit declaration of function ‘smp_store_status’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/smp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a0a8340daafa..ce26ac3cb162 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -44,6 +44,7 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data) } static inline int smp_find_processor_id(int address) { return 0; } +static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } From 983f6b93818aa62fbc74c37fcb8a482718a19252 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Aug 2012 09:18:01 -0700 Subject: [PATCH 0973/1098] ALSA: hda - Avoid unnecessary parameter read for EPSS EPSS parameter should be static, so we can read it once and remember. This also allows more easily to override the wrong EPSS capability reported from a codec by changing the flag in the codec initialization step. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 10 ++++++++-- sound/pci/hda/hda_codec.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index f560051a949e..f25c24c743f9 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1209,6 +1209,9 @@ static void snd_hda_codec_free(struct hda_codec *codec) kfree(codec); } +static bool snd_hda_codec_get_supported_ps(struct hda_codec *codec, + hda_nid_t fg, unsigned int power_state); + static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, unsigned int power_state); @@ -1317,6 +1320,10 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, AC_VERB_GET_SUBSYSTEM_ID, 0); } + codec->epss = snd_hda_codec_get_supported_ps(codec, + codec->afg ? codec->afg : codec->mfg, + AC_PWRST_EPSS); + /* power-up all before initialization */ hda_set_power_state(codec, codec->afg ? codec->afg : codec->mfg, @@ -3543,8 +3550,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg, /* this delay seems necessary to avoid click noise at power-down */ if (power_state == AC_PWRST_D3) { /* transition time less than 10ms for power down */ - bool epss = snd_hda_codec_get_supported_ps(codec, fg, AC_PWRST_EPSS); - msleep(epss ? 10 : 100); + msleep(codec->epss ? 10 : 100); } /* repeat power states setting at most 10 times*/ diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 7fbc1bcaf1a9..e5a7e19a8071 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -862,6 +862,7 @@ struct hda_codec { unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */ unsigned int no_jack_detect:1; /* Machine has no jack-detection */ unsigned int pcm_format_first:1; /* PCM format must be set first */ + unsigned int epss:1; /* supporting EPSS? */ #ifdef CONFIG_SND_HDA_POWER_SAVE unsigned int power_on :1; /* current (global) power-state */ int power_transition; /* power-state in transition */ From c36b5b054aaf14d68261970e3769398110e636d8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 28 Aug 2012 09:20:13 -0700 Subject: [PATCH 0974/1098] ALSA: hda - Don't trust codec EPSS bit for IDT 92HD83xx & co These codecs seem reporting EPSS but require longer delay for the proper D3 transition. For example, D3_STOP_CLOCK_OK bit won't be set correctly even after D3. In this patch, codec->epss flag is overridden for avoid the misbehavior. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 3edd73c3d361..6f806d3e56bb 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5534,6 +5534,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e); } + codec->epss = 0; /* longer delay needed for D3 */ codec->no_trigger_sense = 1; codec->spec = spec; From 7ce9bf1f4785dab0598a19a7fcb0733a18193e4e Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 27 Aug 2012 20:27:19 +0200 Subject: [PATCH 0975/1098] mm: cma: fix alignment requirements for contiguous regions Contiguous Memory Allocator requires each of its regions to be aligned in such a way that it is possible to change migration type for all pageblocks holding it and then isolate page of largest possible order from the buddy allocator (which is MAX_ORDER-1). This patch relaxes alignment requirements by one order, because MAX_ORDER alignment is not really needed. Signed-off-by: Marek Szyprowski CC: Michal Nazarewicz Acked-by: Michal Nazarewicz --- drivers/base/dma-contiguous.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 78efb0306a44..34d94c762a1e 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size, return -EINVAL; /* Sanitise input arguments */ - alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order); + alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); From e092705bcd53de3bafc3053b0b55bf83e5d6711f Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Aug 2012 14:39:39 +0200 Subject: [PATCH 0976/1098] ARM: relax conditions required for enabling Contiguous Memory Allocator Contiguous Memory Allocator requires only paging and MMU enabled not particular CPU architectures, so there is no need for strict dependency on CPU type. This enables to use CMA on some older ARM v5 systems which also might need large contiguous blocks for the multimedia processing hw modules. Reported-by: Prabhakar Lad Signed-off-by: Marek Szyprowski Tested-by: Prabhakar Lad --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18fee9fe..0824a91ebc26 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION From 6e5267aa543817015edb4a65c66e15f9809f92bd Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Aug 2012 11:19:25 +0200 Subject: [PATCH 0977/1098] ARM: DMA-Mapping: add function for setting coherent pool size from platform code Some platforms might require to increase atomic coherent pool to make sure that their device will be able to allocate all their buffers from atomic context. This function can be also used to decrease atomic coherent pool size if coherent allocations are not used for the given sub-platform. Suggested-by: Josh Coombs Signed-off-by: Marek Szyprowski --- arch/arm/include/asm/dma-mapping.h | 7 +++++++ arch/arm/mm/dma-mapping.c | 19 ++++++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df4551..5c44dcb0987b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } +/* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d1182e8a3..d1cc9c1d3566 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,6 +267,8 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; @@ -277,7 +279,7 @@ struct dma_pool { }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ From fb71285f0c1633a85544784aae7577502274b77a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 22 Aug 2012 14:50:42 +0200 Subject: [PATCH 0978/1098] ARM: DMA-Mapping: print warning when atomic coherent allocation fails Print a loud warning when system runs out of memory from atomic DMA coherent pool to let users notice the potential problem. Reported-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index d1cc9c1d3566..acced9332109 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -461,6 +461,10 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; *ret_page = pool->page + pageno; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); From cb01b633eeb77ae7128cab0a3b5d3de56da6e913 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 28 Aug 2012 20:57:41 +0200 Subject: [PATCH 0979/1098] ARM: Kirkwood: increase atomic coherent pool size The default 256 KiB coherent pool may be too small for some of the Kirkwood devices, so increase it to make sure that devices will be able to allocate their buffers with GFP_ATOMIC flag. Suggested-by: Josh Coombs Signed-off-by: Marek Szyprowski Acked-by: Jason Cooper --- arch/arm/mach-kirkwood/common.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfce..d748f5033861 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; From 6b3fe47264262fa082897ebe8ae01041eae65e14 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:01 +0300 Subject: [PATCH 0980/1098] ARM: dma-mapping: atomic_pool with struct page **pages struct page **pages is necessary to align with non atomic path in __iommu_get_pages(). atomic_pool() has the intialized **pages instead of just *page. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index acced9332109..9a21284a6ac4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -275,7 +275,7 @@ struct dma_pool { unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { @@ -314,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -321,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -460,7 +471,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; } else { pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" "Please increase it with coherent_pool= kernel parameter!\n", From 21d0a75951ccf71f671eb24b61a8ad2b497be4b4 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:02 +0300 Subject: [PATCH 0981/1098] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool Check the given range("start", "size") is included in "atomic_pool" or not. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 9a21284a6ac4..882eacc6ebc1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -482,20 +482,34 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start > pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; From 665bad7bb911d392000fa69bc6b599c0df992504 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:03 +0300 Subject: [PATCH 0982/1098] ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() Support atomic allocation in __iommu_get_pages(). Signed-off-by: Hiroshi Doyu [moved __atomic_get_pages() under #ifdef CONFIG_ARM_DMA_USE_IOMMU to avoid unused fuction warning for no-IOMMU case] Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 882eacc6ebc1..54b158df5afa 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1136,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; From 479ed93a4b98eef03fd8260f7ddc00019221c450 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:04 +0300 Subject: [PATCH 0983/1098] ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC Make use of the same atomic pool as DMA does, and skip a kernel page mapping which can involve sleep'able operations at allocating a kernel page table. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 54b158df5afa..051204fc4617 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1161,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1171,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1237,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); From aa2ffd06168e25689e0eb9662bf4595ba2bbac14 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 26 Jul 2012 03:40:35 -0600 Subject: [PATCH 0984/1098] Btrfs: fix a misplaced address operator in a condition This should obviously not be "if (&flag)" but "if (flag)". Signed-off-by: Stefan Behrens --- fs/btrfs/locking.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c index a44eff074805..2a1762c66041 100644 --- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -67,7 +67,7 @@ void btrfs_clear_lock_blocking_rw(struct extent_buffer *eb, int rw) { if (eb->lock_nested) { read_lock(&eb->lock); - if (&eb->lock_nested && current->pid == eb->lock_owner) { + if (eb->lock_nested && current->pid == eb->lock_owner) { read_unlock(&eb->lock); return; } From 5986802c2fcc754040bb7ed95f30bb16c4a843b7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:16:10 -0600 Subject: [PATCH 0985/1098] Btrfs: fix some error codes in btrfs_qgroup_inherit() These are returning zero when it should be returning a negative error code. Signed-off-by: Dan Carpenter --- fs/btrfs/qgroup.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index bc424ae5a81a..229ef8927e6b 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1369,8 +1369,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); - if (!srcgroup) + if (!srcgroup) { + ret = -EINVAL; goto unlock; + } dstgroup->rfer = srcgroup->rfer - level_size; dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size; srcgroup->excl = level_size; @@ -1379,8 +1381,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, qgroup_dirty(fs_info, srcgroup); } - if (!inherit) + if (!inherit) { + ret = -EINVAL; goto unlock; + } i_qgroups = (u64 *)(inherit + 1); for (i = 0; i < inherit->num_qgroups; ++i) { From 57a5a882031dba5cb7bc7ebc955b897498365fe2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:15:43 -0600 Subject: [PATCH 0986/1098] Btrfs: checking for NULL instead of IS_ERR add_qgroup_rb() never returns NULL, only error pointers. Signed-off-by: Dan Carpenter --- fs/btrfs/qgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 229ef8927e6b..38b42e7bc91d 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1364,8 +1364,10 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, spin_lock(&fs_info->qgroup_lock); dstgroup = add_qgroup_rb(fs_info, objectid); - if (!dstgroup) + if (IS_ERR(dstgroup)) { + ret = PTR_ERR(dstgroup); goto unlock; + } if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); From 55e591ffde38e0088b022129e035e18a8d04c7e6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:15:15 -0600 Subject: [PATCH 0987/1098] Btrfs: unlock on error in btrfs_delalloc_reserve_metadata() We should release this mutex before returning the error code. Signed-off-by: Dan Carpenter --- fs/btrfs/extent-tree.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4e1b153b7c47..45c69c4184c9 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4571,8 +4571,10 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) if (root->fs_info->quota_enabled) { ret = btrfs_qgroup_reserve(root, num_bytes + nr_extents * root->leafsize); - if (ret) + if (ret) { + mutex_unlock(&BTRFS_I(inode)->delalloc_mutex); return ret; + } } ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush); From dadd1105ca9a1e506c678e8e410e9623efdda821 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 30 Jul 2012 02:10:44 -0600 Subject: [PATCH 0988/1098] Btrfs: fix some endian bugs handling the root times "trans->transid" is cpu endian but we want to store the data as little endian. "item->ctime.nsec" is only 32 bits, not 64. Signed-off-by: Dan Carpenter --- fs/btrfs/ioctl.c | 2 +- fs/btrfs/root-tree.c | 4 ++-- fs/btrfs/transaction.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 43f0012016e3..a1fbca0a1003 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -424,7 +424,7 @@ static noinline int create_subvol(struct btrfs_root *root, uuid_le_gen(&new_uuid); memcpy(root_item.uuid, new_uuid.b, BTRFS_UUID_SIZE); root_item.otime.sec = cpu_to_le64(cur_time.tv_sec); - root_item.otime.nsec = cpu_to_le64(cur_time.tv_nsec); + root_item.otime.nsec = cpu_to_le32(cur_time.tv_nsec); root_item.ctime = root_item.otime; btrfs_set_root_ctransid(&root_item, trans->transid); btrfs_set_root_otransid(&root_item, trans->transid); diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 6bb465cca20f..10d8e4d88071 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -544,8 +544,8 @@ void btrfs_update_root_times(struct btrfs_trans_handle *trans, struct timespec ct = CURRENT_TIME; spin_lock(&root->root_times_lock); - item->ctransid = trans->transid; + item->ctransid = cpu_to_le64(trans->transid); item->ctime.sec = cpu_to_le64(ct.tv_sec); - item->ctime.nsec = cpu_to_le64(ct.tv_nsec); + item->ctime.nsec = cpu_to_le32(ct.tv_nsec); spin_unlock(&root->root_times_lock); } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7ac7cdcc294e..7208ada41e0e 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1061,7 +1061,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, memcpy(new_root_item->parent_uuid, root->root_item.uuid, BTRFS_UUID_SIZE); new_root_item->otime.sec = cpu_to_le64(cur_time.tv_sec); - new_root_item->otime.nsec = cpu_to_le64(cur_time.tv_nsec); + new_root_item->otime.nsec = cpu_to_le32(cur_time.tv_nsec); btrfs_set_root_otransid(new_root_item, trans->transid); memset(&new_root_item->stime, 0, sizeof(new_root_item->stime)); memset(&new_root_item->rtime, 0, sizeof(new_root_item->rtime)); From eb838e73dc2121d2bae47d5678952cd7d48793b5 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 31 Jul 2012 16:28:48 -0400 Subject: [PATCH 0989/1098] Btrfs: lock extents as we map them in DIO A deadlock in xfstests 113 was uncovered by commit d187663ef24cd3d033f0cbf2867e70b36a3a90b8 This is because we would not return EIOCBQUEUED for short AIO reads, instead we'd wait for the DIO to complete and then return the amount of data we transferred, which would allow our stuff to unlock the remaning amount. But with this change this no longer happens, so if we have a short AIO read (for example if we try to read past EOF), we could leave the section from EOF to the end of where we tried to read locked. Fixing this is tricky since there is no clear way to know exactly how much data DIO truly submitted for IO, so to make this less hard on ourselves and less combersome we need to lock the extents as we try to map them, and then we unlock any areas we didn't actually map. This makes us completely safe from deadlocks and reliance on a particular behavior of the DIO code. This also lays the groundwork for allowing us to use the normal csum storage method for reads which means we can remove an allocation. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 256 +++++++++++++++++++++++------------------------ 1 file changed, 127 insertions(+), 129 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dac1fc21d809..09182449cbdf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5773,18 +5773,109 @@ out: return ret; } +static int lock_extent_direct(struct inode *inode, u64 lockstart, u64 lockend, + struct extent_state **cached_state, int writing) +{ + struct btrfs_ordered_extent *ordered; + int ret = 0; + + while (1) { + lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend, + 0, cached_state); + /* + * We're concerned with the entire range that we're going to be + * doing DIO to, so we need to make sure theres no ordered + * extents in this range. + */ + ordered = btrfs_lookup_ordered_range(inode, lockstart, + lockend - lockstart + 1); + + /* + * We need to make sure there are no buffered pages in this + * range either, we could have raced between the invalidate in + * generic_file_direct_write and locking the extent. The + * invalidate needs to happen so that reads after a write do not + * get stale data. + */ + if (!ordered && (!writing || + !test_range_bit(&BTRFS_I(inode)->io_tree, + lockstart, lockend, EXTENT_UPTODATE, 0, + *cached_state))) + break; + + unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend, + cached_state, GFP_NOFS); + + if (ordered) { + btrfs_start_ordered_extent(inode, ordered, 1); + btrfs_put_ordered_extent(ordered); + } else { + /* Screw you mmap */ + ret = filemap_write_and_wait_range(inode->i_mapping, + lockstart, + lockend); + if (ret) + break; + + /* + * If we found a page that couldn't be invalidated just + * fall back to buffered. + */ + ret = invalidate_inode_pages2_range(inode->i_mapping, + lockstart >> PAGE_CACHE_SHIFT, + lockend >> PAGE_CACHE_SHIFT); + if (ret) + break; + } + + cond_resched(); + } + + return ret; +} + static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { struct extent_map *em; struct btrfs_root *root = BTRFS_I(inode)->root; + struct extent_state *cached_state = NULL; u64 start = iblock << inode->i_blkbits; + u64 lockstart, lockend; u64 len = bh_result->b_size; struct btrfs_trans_handle *trans; + int unlock_bits = EXTENT_LOCKED; + int ret; + + lockstart = start; + lockend = start + len - 1; + if (create) { + ret = btrfs_delalloc_reserve_space(inode, len); + if (ret) + return ret; + unlock_bits |= EXTENT_DELALLOC | EXTENT_DIRTY; + } + + /* + * If this errors out it's because we couldn't invalidate pagecache for + * this range and we need to fallback to buffered. + */ + if (lock_extent_direct(inode, lockstart, lockend, &cached_state, create)) + return -ENOTBLK; + + if (create) { + ret = set_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockend, EXTENT_DELALLOC, NULL, + &cached_state, GFP_NOFS); + if (ret) + goto unlock_err; + } em = btrfs_get_extent(inode, NULL, 0, start, len, 0); - if (IS_ERR(em)) - return PTR_ERR(em); + if (IS_ERR(em)) { + ret = PTR_ERR(em); + goto unlock_err; + } /* * Ok for INLINE and COMPRESSED extents we need to fallback on buffered @@ -5803,17 +5894,16 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags) || em->block_start == EXTENT_MAP_INLINE) { free_extent_map(em); - return -ENOTBLK; + ret = -ENOTBLK; + goto unlock_err; } /* Just a good old fashioned hole, return */ if (!create && (em->block_start == EXTENT_MAP_HOLE || test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { free_extent_map(em); - /* DIO will do one hole at a time, so just unlock a sector */ - unlock_extent(&BTRFS_I(inode)->io_tree, start, - start + root->sectorsize - 1); - return 0; + ret = 0; + goto unlock_err; } /* @@ -5826,8 +5916,9 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, * */ if (!create) { - len = em->len - (start - em->start); - goto map; + len = min(len, em->len - (start - em->start)); + lockstart = start + len; + goto unlock; } if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags) || @@ -5859,7 +5950,7 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, btrfs_end_transaction(trans, root); if (ret) { free_extent_map(em); - return ret; + goto unlock_err; } goto unlock; } @@ -5872,14 +5963,12 @@ must_cow: */ len = bh_result->b_size; em = btrfs_new_extent_direct(inode, em, start, len); - if (IS_ERR(em)) - return PTR_ERR(em); + if (IS_ERR(em)) { + ret = PTR_ERR(em); + goto unlock_err; + } len = min(len, em->len - (start - em->start)); unlock: - clear_extent_bit(&BTRFS_I(inode)->io_tree, start, start + len - 1, - EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DIRTY, 1, - 0, NULL, GFP_NOFS); -map: bh_result->b_blocknr = (em->block_start + (start - em->start)) >> inode->i_blkbits; bh_result->b_size = len; @@ -5897,9 +5986,28 @@ map: i_size_write(inode, start + len); } + /* + * In the case of write we need to clear and unlock the entire range, + * in the case of read we need to unlock only the end area that we + * aren't using if there is any left over space. + */ + if (lockstart < lockend) + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, + unlock_bits, 1, 0, &cached_state, GFP_NOFS); + else + free_extent_state(cached_state); + free_extent_map(em); return 0; + +unlock_err: + if (create) + unlock_bits |= EXTENT_DO_ACCOUNTING; + + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, + unlock_bits, 1, 0, &cached_state, GFP_NOFS); + return ret; } struct btrfs_dio_private { @@ -6340,132 +6448,22 @@ static ssize_t check_direct_IO(struct btrfs_root *root, int rw, struct kiocb *io out: return retval; } + static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - struct btrfs_ordered_extent *ordered; - struct extent_state *cached_state = NULL; - u64 lockstart, lockend; - ssize_t ret; - int writing = rw & WRITE; - int write_bits = 0; - size_t count = iov_length(iov, nr_segs); if (check_direct_IO(BTRFS_I(inode)->root, rw, iocb, iov, - offset, nr_segs)) { + offset, nr_segs)) return 0; - } - lockstart = offset; - lockend = offset + count - 1; - - if (writing) { - ret = btrfs_delalloc_reserve_space(inode, count); - if (ret) - goto out; - } - - while (1) { - lock_extent_bits(&BTRFS_I(inode)->io_tree, lockstart, lockend, - 0, &cached_state); - /* - * We're concerned with the entire range that we're going to be - * doing DIO to, so we need to make sure theres no ordered - * extents in this range. - */ - ordered = btrfs_lookup_ordered_range(inode, lockstart, - lockend - lockstart + 1); - - /* - * We need to make sure there are no buffered pages in this - * range either, we could have raced between the invalidate in - * generic_file_direct_write and locking the extent. The - * invalidate needs to happen so that reads after a write do not - * get stale data. - */ - if (!ordered && (!writing || - !test_range_bit(&BTRFS_I(inode)->io_tree, - lockstart, lockend, EXTENT_UPTODATE, 0, - cached_state))) - break; - - unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend, - &cached_state, GFP_NOFS); - - if (ordered) { - btrfs_start_ordered_extent(inode, ordered, 1); - btrfs_put_ordered_extent(ordered); - } else { - /* Screw you mmap */ - ret = filemap_write_and_wait_range(file->f_mapping, - lockstart, - lockend); - if (ret) - goto out; - - /* - * If we found a page that couldn't be invalidated just - * fall back to buffered. - */ - ret = invalidate_inode_pages2_range(file->f_mapping, - lockstart >> PAGE_CACHE_SHIFT, - lockend >> PAGE_CACHE_SHIFT); - if (ret) { - if (ret == -EBUSY) - ret = 0; - goto out; - } - } - - cond_resched(); - } - - /* - * we don't use btrfs_set_extent_delalloc because we don't want - * the dirty or uptodate bits - */ - if (writing) { - write_bits = EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING; - ret = set_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, - EXTENT_DELALLOC, NULL, &cached_state, - GFP_NOFS); - if (ret) { - clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, - lockend, EXTENT_LOCKED | write_bits, - 1, 0, &cached_state, GFP_NOFS); - goto out; - } - } - - free_extent_state(cached_state); - cached_state = NULL; - - ret = __blockdev_direct_IO(rw, iocb, inode, + return __blockdev_direct_IO(rw, iocb, inode, BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev, iov, offset, nr_segs, btrfs_get_blocks_direct, NULL, btrfs_submit_direct, 0); - - if (ret < 0 && ret != -EIOCBQUEUED) { - clear_extent_bit(&BTRFS_I(inode)->io_tree, offset, - offset + iov_length(iov, nr_segs) - 1, - EXTENT_LOCKED | write_bits, 1, 0, - &cached_state, GFP_NOFS); - } else if (ret >= 0 && ret < iov_length(iov, nr_segs)) { - /* - * We're falling back to buffered, unlock the section we didn't - * do IO on. - */ - clear_extent_bit(&BTRFS_I(inode)->io_tree, offset + ret, - offset + iov_length(iov, nr_segs) - 1, - EXTENT_LOCKED | write_bits, 1, 0, - &cached_state, GFP_NOFS); - } -out: - free_extent_state(cached_state); - return ret; } static int btrfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, From 3627bf4503b504077332c13496cb1bd54713bcbb Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 1 Aug 2012 04:28:01 -0600 Subject: [PATCH 0990/1098] Btrfs: fix that error value is changed by mistake In iterate_inodes_from_logical() the error result from extent_from_logical() is patched by mistake. Typically ENOENT is patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK) evaluates to true. Signed-off-by: Stefan Behrens --- fs/btrfs/backref.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index a256f3b2a845..ff6475f409d6 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1438,10 +1438,10 @@ int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info, ret = extent_from_logical(fs_info, logical, path, &found_key); btrfs_release_path(path); - if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) - ret = -EINVAL; if (ret < 0) return ret; + if (ret & BTRFS_EXTENT_FLAG_TREE_BLOCK) + return -EINVAL; extent_item_pos = logical - found_key.objectid; ret = iterate_extent_inodes(fs_info, found_key.objectid, From aa9ddcd4b5557102fa25695c11904f249b4dec49 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 2 Aug 2012 10:22:20 -0400 Subject: [PATCH 0991/1098] Btrfs: do not use missing devices when showing devname If you do the following mkfs.btrfs /dev/sdb /dev/sdc rmmod btrfs dd if=/dev/zero of=/dev/sdb bs=1M count=1 mount -o degraded /dev/sdc /mnt/btrfs-test the box will panic trying to deref the name for the missing dev since it is the lower numbered devid. So fix show_devname to not use missing devices. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 75ee2c7791f0..2e06f124f284 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1505,6 +1505,8 @@ static int btrfs_show_devname(struct seq_file *m, struct dentry *root) while (cur_devices) { head = &cur_devices->devices; list_for_each_entry(dev, head, dev_list) { + if (dev->missing) + continue; if (!first_dev || dev->devid < first_dev->devid) first_dev = dev; } From 99f5944b8477914406173b47b4f261356286730b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 2 Aug 2012 10:23:59 -0400 Subject: [PATCH 0992/1098] Btrfs: do not strdup non existent strings When we close devices we add back empty devices for some reason that escapes me. In the case of a missing dev we don't allocate an rcu_string for it's name, so check to see if the device has a name and if it doesn't don't bother strdup()'ing it. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/volumes.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b8708f994e67..3b394503bd4e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -569,9 +569,11 @@ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) memcpy(new_device, device, sizeof(*new_device)); /* Safe because we are under uuid_mutex */ - name = rcu_string_strdup(device->name->str, GFP_NOFS); - BUG_ON(device->name && !name); /* -ENOMEM */ - rcu_assign_pointer(new_device->name, name); + if (device->name) { + name = rcu_string_strdup(device->name->str, GFP_NOFS); + BUG_ON(device->name && !name); /* -ENOMEM */ + rcu_assign_pointer(new_device->name, name); + } new_device->bdev = NULL; new_device->writeable = 0; new_device->in_fs_metadata = 0; From c329861da40623cd838b8c9ee31a850242fd88cf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 3 Aug 2012 16:49:19 -0400 Subject: [PATCH 0993/1098] Btrfs: don't allocate a seperate csums array for direct reads We've been allocating a big array for csums instead of storing them in the io_tree like we do for buffered reads because previously we were locking the entire range, so we didn't have an extent state for each sector of the range. But now that we do the range locking as we map the buffers we can limit the mapping lenght to sectorsize and use the private part of the io_tree for our csums. This allows us to avoid an extra memory allocation for direct reads which could incur latency. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 2 +- fs/btrfs/file-item.c | 4 ++-- fs/btrfs/inode.c | 45 ++++++++++++++++---------------------------- 3 files changed, 19 insertions(+), 32 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index adb1cd7ceb9b..348196350bf0 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -3192,7 +3192,7 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode, struct bio *bio, u32 *dst); int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode, - struct bio *bio, u64 logical_offset, u32 *dst); + struct bio *bio, u64 logical_offset); int btrfs_insert_file_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 objectid, u64 pos, diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index b45b9de0c21d..857d93cd01dc 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -272,9 +272,9 @@ int btrfs_lookup_bio_sums(struct btrfs_root *root, struct inode *inode, } int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode, - struct bio *bio, u64 offset, u32 *dst) + struct bio *bio, u64 offset) { - return __btrfs_lookup_bio_sums(root, inode, bio, offset, dst, 1); + return __btrfs_lookup_bio_sums(root, inode, bio, offset, NULL, 1); } int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 09182449cbdf..2d65c52b0944 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5847,15 +5847,18 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, int unlock_bits = EXTENT_LOCKED; int ret; - lockstart = start; - lockend = start + len - 1; if (create) { ret = btrfs_delalloc_reserve_space(inode, len); if (ret) return ret; unlock_bits |= EXTENT_DELALLOC | EXTENT_DIRTY; + } else { + len = min_t(u64, len, root->sectorsize); } + lockstart = start; + lockend = start + len - 1; + /* * If this errors out it's because we couldn't invalidate pagecache for * this range and we need to fallback to buffered. @@ -6015,7 +6018,6 @@ struct btrfs_dio_private { u64 logical_offset; u64 disk_bytenr; u64 bytes; - u32 *csums; void *private; /* number of bios pending for this dio */ @@ -6035,7 +6037,6 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct inode *inode = dip->inode; struct btrfs_root *root = BTRFS_I(inode)->root; u64 start; - u32 *private = dip->csums; start = dip->logical_offset; do { @@ -6043,8 +6044,12 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) struct page *page = bvec->bv_page; char *kaddr; u32 csum = ~(u32)0; + u64 private = ~(u32)0; unsigned long flags; + if (get_state_private(&BTRFS_I(inode)->io_tree, + start, &private)) + goto failed; local_irq_save(flags); kaddr = kmap_atomic(page); csum = btrfs_csum_data(root, kaddr + bvec->bv_offset, @@ -6054,18 +6059,18 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) local_irq_restore(flags); flush_dcache_page(bvec->bv_page); - if (csum != *private) { + if (csum != private) { +failed: printk(KERN_ERR "btrfs csum failed ino %llu off" " %llu csum %u private %u\n", (unsigned long long)btrfs_ino(inode), (unsigned long long)start, - csum, *private); + csum, (unsigned)private); err = -EIO; } } start += bvec->bv_len; - private++; bvec++; } while (bvec <= bvec_end); @@ -6073,7 +6078,6 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) dip->logical_offset + dip->bytes - 1); bio->bi_private = dip->private; - kfree(dip->csums); kfree(dip); /* If we had a csum failure make sure to clear the uptodate flag */ @@ -6179,7 +6183,7 @@ static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev, static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode, int rw, u64 file_offset, int skip_sum, - u32 *csums, int async_submit) + int async_submit) { int write = rw & REQ_WRITE; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -6212,8 +6216,7 @@ static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode, if (ret) goto err; } else if (!skip_sum) { - ret = btrfs_lookup_bio_sums_dio(root, inode, bio, - file_offset, csums); + ret = btrfs_lookup_bio_sums_dio(root, inode, bio, file_offset); if (ret) goto err; } @@ -6239,10 +6242,8 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, u64 submit_len = 0; u64 map_length; int nr_pages = 0; - u32 *csums = dip->csums; int ret = 0; int async_submit = 0; - int write = rw & REQ_WRITE; map_length = orig_bio->bi_size; ret = btrfs_map_block(map_tree, READ, start_sector << 9, @@ -6278,16 +6279,13 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, atomic_inc(&dip->pending_bios); ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum, - csums, async_submit); + async_submit); if (ret) { bio_put(bio); atomic_dec(&dip->pending_bios); goto out_err; } - /* Write's use the ordered csums */ - if (!write && !skip_sum) - csums = csums + nr_pages; start_sector += submit_len >> 9; file_offset += submit_len; @@ -6317,7 +6315,7 @@ static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip, submit: ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum, - csums, async_submit); + async_submit); if (!ret) return 0; @@ -6353,17 +6351,6 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode, ret = -ENOMEM; goto free_ordered; } - dip->csums = NULL; - - /* Write's use the ordered csum stuff, so we don't need dip->csums */ - if (!write && !skip_sum) { - dip->csums = kmalloc(sizeof(u32) * bio->bi_vcnt, GFP_NOFS); - if (!dip->csums) { - kfree(dip); - ret = -ENOMEM; - goto free_ordered; - } - } dip->private = bio->bi_private; dip->inode = inode; From 6209526531e70c080f79318ab8f50e26846c40a8 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sat, 4 Aug 2012 01:45:02 -0600 Subject: [PATCH 0994/1098] btrfs: fix second lock in btrfs_delete_delayed_items() Fix a real bug caught by coccinelle. fs/btrfs/delayed-inode.c:1013:1-11: second lock on line 1013 Signed-off-by: Fengguang Wu --- fs/btrfs/delayed-inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 335605c8ceab..00deed4ef3ed 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1028,9 +1028,10 @@ do_again: btrfs_release_delayed_item(prev); ret = 0; btrfs_release_path(path); - if (curr) + if (curr) { + mutex_unlock(&node->mutex); goto do_again; - else + } else goto delete_fail; } From 1fa11e265fa2562fb713171b6a58e72bb7afd276 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Mon, 6 Aug 2012 14:18:51 -0600 Subject: [PATCH 0995/1098] Btrfs: fix deadlock in wait_for_more_refs Commit a168650c introduced a waiting mechanism to prevent busy waiting in btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations, where a tree_mod_seq is held while waiting for the io to complete, while the end_io calls btrfs_run_delayed_refs. This whole mechanism is unnecessary. If not enough runnable refs are available to satisfy count, just return as count is more like a guideline than a strict requirement. In case we have to run all refs, commit transaction makes sure that no other threads are working in the transaction anymore, so we just assert here that no refs are blocked. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 6 ---- fs/btrfs/ctree.h | 1 - fs/btrfs/delayed-ref.c | 8 ----- fs/btrfs/disk-io.c | 2 -- fs/btrfs/extent-tree.c | 77 ++++++++++++------------------------------ 5 files changed, 21 insertions(+), 73 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 9d7621f271ff..08e0b11ba0a1 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -420,12 +420,6 @@ void btrfs_put_tree_mod_seq(struct btrfs_fs_info *fs_info, } spin_unlock(&fs_info->tree_mod_seq_lock); - /* - * we removed the lowest blocker from the blocker list, so there may be - * more processible delayed refs. - */ - wake_up(&fs_info->tree_mod_seq_wait); - /* * anything that's lower than the lowest existing (read: blocked) * sequence number can be removed from the tree. diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 348196350bf0..c38734a07a65 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1252,7 +1252,6 @@ struct btrfs_fs_info { atomic_t tree_mod_seq; struct list_head tree_mod_seq_list; struct seq_list tree_mod_seq_elem; - wait_queue_head_t tree_mod_seq_wait; /* this protects tree_mod_log */ rwlock_t tree_mod_log_lock; diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index da7419ed01bb..7561431af50d 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -662,9 +662,6 @@ int btrfs_add_delayed_tree_ref(struct btrfs_fs_info *fs_info, add_delayed_tree_ref(fs_info, trans, &ref->node, bytenr, num_bytes, parent, ref_root, level, action, for_cow); - if (!need_ref_seq(for_cow, ref_root) && - waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); if (need_ref_seq(for_cow, ref_root)) btrfs_qgroup_record_ref(trans, &ref->node, extent_op); @@ -713,9 +710,6 @@ int btrfs_add_delayed_data_ref(struct btrfs_fs_info *fs_info, add_delayed_data_ref(fs_info, trans, &ref->node, bytenr, num_bytes, parent, ref_root, owner, offset, action, for_cow); - if (!need_ref_seq(for_cow, ref_root) && - waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); if (need_ref_seq(for_cow, ref_root)) btrfs_qgroup_record_ref(trans, &ref->node, extent_op); @@ -744,8 +738,6 @@ int btrfs_add_delayed_extent_op(struct btrfs_fs_info *fs_info, num_bytes, BTRFS_UPDATE_DELAYED_HEAD, extent_op->is_data); - if (waitqueue_active(&fs_info->tree_mod_seq_wait)) - wake_up(&fs_info->tree_mod_seq_wait); spin_unlock(&delayed_refs->lock); return 0; } diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 502b20c56e84..a7ad8fc8dc53 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2035,8 +2035,6 @@ int open_ctree(struct super_block *sb, fs_info->free_chunk_space = 0; fs_info->tree_mod_log = RB_ROOT; - init_waitqueue_head(&fs_info->tree_mod_seq_wait); - /* readahead state */ INIT_RADIX_TREE(&fs_info->reada_tree, GFP_NOFS & ~__GFP_WAIT); spin_lock_init(&fs_info->reada_lock); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 45c69c4184c9..d3df65f83b5c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2318,12 +2318,6 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, ref->in_tree = 0; rb_erase(&ref->rb_node, &delayed_refs->root); delayed_refs->num_entries--; - /* - * we modified num_entries, but as we're currently running - * delayed refs, skip - * wake_up(&delayed_refs->seq_wait); - * here. - */ spin_unlock(&delayed_refs->lock); ret = run_one_delayed_ref(trans, root, ref, extent_op, @@ -2350,22 +2344,6 @@ next: return count; } -static void wait_for_more_refs(struct btrfs_fs_info *fs_info, - struct btrfs_delayed_ref_root *delayed_refs, - unsigned long num_refs, - struct list_head *first_seq) -{ - spin_unlock(&delayed_refs->lock); - pr_debug("waiting for more refs (num %ld, first %p)\n", - num_refs, first_seq); - wait_event(fs_info->tree_mod_seq_wait, - num_refs != delayed_refs->num_entries || - fs_info->tree_mod_seq_list.next != first_seq); - pr_debug("done waiting for more refs (num %ld, first %p)\n", - delayed_refs->num_entries, fs_info->tree_mod_seq_list.next); - spin_lock(&delayed_refs->lock); -} - #ifdef SCRAMBLE_DELAYED_REFS /* * Normally delayed refs get processed in ascending bytenr order. This @@ -2460,13 +2438,11 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_root *delayed_refs; struct btrfs_delayed_ref_node *ref; struct list_head cluster; - struct list_head *first_seq = NULL; int ret; u64 delayed_start; int run_all = count == (unsigned long)-1; int run_most = 0; - unsigned long num_refs = 0; - int consider_waiting; + int loops; /* We'll clean this up in btrfs_cleanup_transaction */ if (trans->aborted) @@ -2484,7 +2460,7 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, delayed_refs = &trans->transaction->delayed_refs; INIT_LIST_HEAD(&cluster); again: - consider_waiting = 0; + loops = 0; spin_lock(&delayed_refs->lock); #ifdef SCRAMBLE_DELAYED_REFS @@ -2512,31 +2488,6 @@ again: if (ret) break; - if (delayed_start >= delayed_refs->run_delayed_start) { - if (consider_waiting == 0) { - /* - * btrfs_find_ref_cluster looped. let's do one - * more cycle. if we don't run any delayed ref - * during that cycle (because we can't because - * all of them are blocked) and if the number of - * refs doesn't change, we avoid busy waiting. - */ - consider_waiting = 1; - num_refs = delayed_refs->num_entries; - first_seq = root->fs_info->tree_mod_seq_list.next; - } else { - wait_for_more_refs(root->fs_info, delayed_refs, - num_refs, first_seq); - /* - * after waiting, things have changed. we - * dropped the lock and someone else might have - * run some refs, built new clusters and so on. - * therefore, we restart staleness detection. - */ - consider_waiting = 0; - } - } - ret = run_clustered_refs(trans, root, &cluster); if (ret < 0) { spin_unlock(&delayed_refs->lock); @@ -2549,9 +2500,26 @@ again: if (count == 0) break; - if (ret || delayed_refs->run_delayed_start == 0) { + if (delayed_start >= delayed_refs->run_delayed_start) { + if (loops == 0) { + /* + * btrfs_find_ref_cluster looped. let's do one + * more cycle. if we don't run any delayed ref + * during that cycle (because we can't because + * all of them are blocked), bail out. + */ + loops = 1; + } else { + /* + * no runnable refs left, stop trying + */ + BUG_ON(run_all); + break; + } + } + if (ret) { /* refs were run, let's reset staleness detection */ - consider_waiting = 0; + loops = 0; } } @@ -5296,9 +5264,6 @@ static noinline int check_ref_cleanup(struct btrfs_trans_handle *trans, rb_erase(&head->node.rb_node, &delayed_refs->root); delayed_refs->num_entries--; - smp_mb(); - if (waitqueue_active(&root->fs_info->tree_mod_seq_wait)) - wake_up(&root->fs_info->tree_mod_seq_wait); /* * we don't take a ref on the node because we're removing it from the From 66657b318e0e443ada229fccd40c8be86cfebdbf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 1 Aug 2012 15:36:24 -0400 Subject: [PATCH 0996/1098] Btrfs: barrier before waitqueue_active We need a barrir before calling waitqueue_active otherwise we will miss wakeups. So in places that do atomic_dec(); then atomic_read() use atomic_dec_return() which imply a memory barrier (see memory-barriers.txt) and then add an explicit memory barrier everywhere else that need them. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/compression.c | 1 + fs/btrfs/delayed-inode.c | 7 +++---- fs/btrfs/disk-io.c | 7 ++++--- fs/btrfs/inode.c | 4 +--- fs/btrfs/volumes.c | 3 +-- 5 files changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 86eff48dab78..43d1c5a3a030 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -818,6 +818,7 @@ static void free_workspace(int type, struct list_head *workspace) btrfs_compress_op[idx]->free_workspace(workspace); atomic_dec(alloc_workspace); wake: + smp_mb(); if (waitqueue_active(workspace_wait)) wake_up(workspace_wait); } diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 00deed4ef3ed..07d5eeb1e6f1 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -512,8 +512,8 @@ static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) rb_erase(&delayed_item->rb_node, root); delayed_item->delayed_node->count--; - atomic_dec(&delayed_root->items); - if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND && + if (atomic_dec_return(&delayed_root->items) < + BTRFS_DELAYED_BACKGROUND && waitqueue_active(&delayed_root->wait)) wake_up(&delayed_root->wait); } @@ -1056,8 +1056,7 @@ static void btrfs_release_delayed_inode(struct btrfs_delayed_node *delayed_node) delayed_node->count--; delayed_root = delayed_node->root->fs_info->delayed_root; - atomic_dec(&delayed_root->items); - if (atomic_read(&delayed_root->items) < + if (atomic_dec_return(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND && waitqueue_active(&delayed_root->wait)) wake_up(&delayed_root->wait); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index a7ad8fc8dc53..dd86a5d88428 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -754,9 +754,7 @@ static void run_one_async_done(struct btrfs_work *work) limit = btrfs_async_submit_limit(fs_info); limit = limit * 2 / 3; - atomic_dec(&fs_info->nr_async_submits); - - if (atomic_read(&fs_info->nr_async_submits) < limit && + if (atomic_dec_return(&fs_info->nr_async_submits) < limit && waitqueue_active(&fs_info->async_submit_wait)) wake_up(&fs_info->async_submit_wait); @@ -3783,14 +3781,17 @@ int btrfs_cleanup_transaction(struct btrfs_root *root) /* FIXME: cleanup wait for commit */ t->in_commit = 1; t->blocked = 1; + smp_mb(); if (waitqueue_active(&root->fs_info->transaction_blocked_wait)) wake_up(&root->fs_info->transaction_blocked_wait); t->blocked = 0; + smp_mb(); if (waitqueue_active(&root->fs_info->transaction_wait)) wake_up(&root->fs_info->transaction_wait); t->commit_done = 1; + smp_mb(); if (waitqueue_active(&t->commit_wait)) wake_up(&t->commit_wait); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2d65c52b0944..97baf00b40d1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1007,9 +1007,7 @@ static noinline void async_cow_submit(struct btrfs_work *work) nr_pages = (async_cow->end - async_cow->start + PAGE_CACHE_SIZE) >> PAGE_CACHE_SHIFT; - atomic_sub(nr_pages, &root->fs_info->async_delalloc_pages); - - if (atomic_read(&root->fs_info->async_delalloc_pages) < + if (atomic_sub_return(nr_pages, &root->fs_info->async_delalloc_pages) < 5 * 1024 * 1024 && waitqueue_active(&root->fs_info->async_submit_wait)) wake_up(&root->fs_info->async_submit_wait); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 3b394503bd4e..0b1e69d380dd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -227,9 +227,8 @@ loop_lock: cur = pending; pending = pending->bi_next; cur->bi_next = NULL; - atomic_dec(&fs_info->nr_async_bios); - if (atomic_read(&fs_info->nr_async_bios) < limit && + if (atomic_dec_return(&fs_info->nr_async_bios) < limit && waitqueue_active(&fs_info->async_submit_wait)) wake_up(&fs_info->async_submit_wait); From 6fc823b10f333313deb0b5d9069cbfd3a3f99f3a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 6 Aug 2012 13:46:38 -0600 Subject: [PATCH 0997/1098] Btrfs: increase the size of the free space cache Arne was complaining about the space cache having mismatching generation numbers when debugging a deadlock. This is because we can run out of space in our preallocated range for our space cache if you have a pretty fragmented amount of space in your pinned space. So just increase the amount of space we preallocate for space cache so we can be sure to have enough space. This will only really affect data ranges since their the only chunks that end up larger than 256MB. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index d3df65f83b5c..1bb408f737fb 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2975,17 +2975,16 @@ again: } spin_unlock(&block_group->lock); - num_pages = (int)div64_u64(block_group->key.offset, 1024 * 1024 * 1024); + /* + * Try to preallocate enough space based on how big the block group is. + * Keep in mind this has to include any pinned space which could end up + * taking up quite a bit since it's not folded into the other space + * cache. + */ + num_pages = (int)div64_u64(block_group->key.offset, 256 * 1024 * 1024); if (!num_pages) num_pages = 1; - /* - * Just to make absolutely sure we have enough space, we're going to - * preallocate 12 pages worth of space for each block group. In - * practice we ought to use at most 8, but we need extra space so we can - * add our header and have a terminator between the extents and the - * bitmaps. - */ num_pages *= 16; num_pages *= PAGE_CACHE_SIZE; From b12a3b1ea209d9dec02731fba58c3dbe7d31cfd8 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 7 Aug 2012 15:34:49 -0400 Subject: [PATCH 0998/1098] Btrfs: don't run __tree_mod_log_free_eb on leaves When we split a leaf, we may end up inserting a new root on top of that leaf. The reflog code was incorrectly assuming the old root was always a node. This makes sure we skip over leaves. Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 08e0b11ba0a1..6d183f60d63a 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -625,6 +625,9 @@ __tree_mod_log_free_eb(struct btrfs_fs_info *fs_info, struct extent_buffer *eb) u32 nritems; int ret; + if (btrfs_header_level(eb) == 0) + return; + nritems = btrfs_header_nritems(eb); for (i = nritems - 1; i >= 0; i--) { ret = tree_mod_log_insert_key_locked(fs_info, eb, i, From 22cd2e7de7b0bd68fb668d23e1564707ca689510 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Thu, 9 Aug 2012 00:16:53 -0600 Subject: [PATCH 0999/1098] Btrfs: fix race in run_clustered_refs With commit commit d1270cd91f308c9d22b2804720c36ccd32dbc35e Author: Arne Jansen Date: Tue Sep 13 15:16:43 2011 +0200 Btrfs: put back delayed refs that are too new I added a window where the delayed_ref's head->ref_mod code can diverge from the sum of the remaining refs, because we release the head->mutex in the middle. This leads to btrfs_lookup_extent_info returning wrong numbers. This patch fixes this by adjusting the head's ref_mod with each delayed ref we run. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 1bb408f737fb..f16411d3c252 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2318,6 +2318,23 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, ref->in_tree = 0; rb_erase(&ref->rb_node, &delayed_refs->root); delayed_refs->num_entries--; + if (locked_ref) { + /* + * when we play the delayed ref, also correct the + * ref_mod on head + */ + switch (ref->action) { + case BTRFS_ADD_DELAYED_REF: + case BTRFS_ADD_DELAYED_EXTENT: + locked_ref->node.ref_mod -= ref->ref_mod; + break; + case BTRFS_DROP_DELAYED_REF: + locked_ref->node.ref_mod += ref->ref_mod; + break; + default: + WARN_ON(1); + } + } spin_unlock(&delayed_refs->lock); ret = run_one_delayed_ref(trans, root, ref, extent_op, From c0f62dedd04ae0f3b8a18079db5a015af24e416f Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 8 Aug 2012 21:39:36 -0600 Subject: [PATCH 1000/1098] Btrfs: fix wrong mtime and ctime when creating snapshots When we created a new snapshot, the mtime and ctime of its parent directory were not updated. Fix it. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7208ada41e0e..3ee8d58e97ad 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1026,6 +1026,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_i_size_write(parent_inode, parent_inode->i_size + dentry->d_name.len * 2); + parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME; ret = btrfs_update_inode(trans, parent_root, parent_inode); if (ret) goto abort_trans_dput; From 5a24e84c55f57cc49bd1cab531b6ef28b6b7bdaa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 8 Aug 2012 10:12:59 -0600 Subject: [PATCH 1001/1098] Btrfs: fix enospc problems when deleting a subvol Subvol delete is a special kind of awful where we use the global reserve to cover the ENOSPC requirements. The problem is once we're done removing everything we do a btrfs_update_inode(), which by default will try to do the delayed update stuff which will use it's own reserve. There will be no space in this reserve and we'll return ENOSPC. So instead use btrfs_update_inode_fallback() which will just fallback to updating the inode item in the case of enospc. This is fine because the global reserve covers the space requirements for this. With this patch I can now delete a subvol on a problem image Dave Sterba sent me. Thanks, Reported-by: David Sterba Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 97baf00b40d1..0808f483dafa 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3171,7 +3171,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, btrfs_i_size_write(dir, dir->i_size - name_len * 2); inode_inc_iversion(dir); dir->i_mtime = dir->i_ctime = CURRENT_TIME; - ret = btrfs_update_inode(trans, root, dir); + ret = btrfs_update_inode_fallback(trans, root, dir); if (ret) btrfs_abort_transaction(trans, root, ret); out: From ae1e206b806ccc490dadff59af8a7a2477b32884 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 7 Aug 2012 16:00:32 -0400 Subject: [PATCH 1002/1098] Btrfs: allow delayed refs to be merged Daniel Blueman reported a bug with fio+balance on a ramdisk setup. Basically what happens is the balance relocates a tree block which will drop the implicit refs for all of its children and adds a full backref. Once the block is relocated we have to add the implicit refs back, so when we cow the block again we add the implicit refs for its children back. The problem comes when the original drop ref doesn't get run before we add the implicit refs back. The delayed ref stuff will specifically prefer ADD operations over DROP to keep us from freeing up an extent that will have references to it, so we try to add the implicit ref before it is actually removed and we panic. This worked fine before because the add would have just canceled the drop out and we would have been fine. But the backref walking work needs to be able to freeze the delayed ref stuff in time so we have this ever increasing sequence number that gets attached to all new delayed ref updates which makes us not merge refs and we run into this issue. So to fix this we need to merge delayed refs. So everytime we run a clustered ref we need to try and merge all of its delayed refs. The backref walking stuff locks the delayed ref head before processing, so if we have it locked we are safe to merge any refs inside of the sequence number. If there is no sequence number we can merge all refs. Doing this not only fixes our bug but keeps the delayed ref code from adding and removing useless refs and batching together multiple refs into one search instead of one search per delayed ref, which will really help our commit times. I ran this with Daniels test and 276 and I haven't seen any problems. Thanks, Reported-by: Daniel J Blueman Signed-off-by: Josef Bacik --- fs/btrfs/delayed-ref.c | 155 ++++++++++++++++++++++++++++++++++------- fs/btrfs/delayed-ref.h | 4 ++ fs/btrfs/extent-tree.c | 10 +++ 3 files changed, 142 insertions(+), 27 deletions(-) diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index 7561431af50d..ae9411773397 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -38,17 +38,14 @@ static int comp_tree_refs(struct btrfs_delayed_tree_ref *ref2, struct btrfs_delayed_tree_ref *ref1) { - if (ref1->node.type == BTRFS_TREE_BLOCK_REF_KEY) { - if (ref1->root < ref2->root) - return -1; - if (ref1->root > ref2->root) - return 1; - } else { - if (ref1->parent < ref2->parent) - return -1; - if (ref1->parent > ref2->parent) - return 1; - } + if (ref1->root < ref2->root) + return -1; + if (ref1->root > ref2->root) + return 1; + if (ref1->parent < ref2->parent) + return -1; + if (ref1->parent > ref2->parent) + return 1; return 0; } @@ -85,7 +82,8 @@ static int comp_data_refs(struct btrfs_delayed_data_ref *ref2, * type of the delayed backrefs and content of delayed backrefs. */ static int comp_entry(struct btrfs_delayed_ref_node *ref2, - struct btrfs_delayed_ref_node *ref1) + struct btrfs_delayed_ref_node *ref1, + bool compare_seq) { if (ref1->bytenr < ref2->bytenr) return -1; @@ -102,10 +100,12 @@ static int comp_entry(struct btrfs_delayed_ref_node *ref2, if (ref1->type > ref2->type) return 1; /* merging of sequenced refs is not allowed */ - if (ref1->seq < ref2->seq) - return -1; - if (ref1->seq > ref2->seq) - return 1; + if (compare_seq) { + if (ref1->seq < ref2->seq) + return -1; + if (ref1->seq > ref2->seq) + return 1; + } if (ref1->type == BTRFS_TREE_BLOCK_REF_KEY || ref1->type == BTRFS_SHARED_BLOCK_REF_KEY) { return comp_tree_refs(btrfs_delayed_node_to_tree_ref(ref2), @@ -139,7 +139,7 @@ static struct btrfs_delayed_ref_node *tree_insert(struct rb_root *root, entry = rb_entry(parent_node, struct btrfs_delayed_ref_node, rb_node); - cmp = comp_entry(entry, ins); + cmp = comp_entry(entry, ins, 1); if (cmp < 0) p = &(*p)->rb_left; else if (cmp > 0) @@ -233,6 +233,114 @@ int btrfs_delayed_ref_lock(struct btrfs_trans_handle *trans, return 0; } +static void inline drop_delayed_ref(struct btrfs_trans_handle *trans, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_node *ref) +{ + rb_erase(&ref->rb_node, &delayed_refs->root); + ref->in_tree = 0; + btrfs_put_delayed_ref(ref); + delayed_refs->num_entries--; + if (trans->delayed_ref_updates) + trans->delayed_ref_updates--; +} + +static int merge_ref(struct btrfs_trans_handle *trans, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_node *ref, u64 seq) +{ + struct rb_node *node; + int merged = 0; + int mod = 0; + int done = 0; + + node = rb_prev(&ref->rb_node); + while (node) { + struct btrfs_delayed_ref_node *next; + + next = rb_entry(node, struct btrfs_delayed_ref_node, rb_node); + node = rb_prev(node); + if (next->bytenr != ref->bytenr) + break; + if (seq && next->seq >= seq) + break; + if (comp_entry(ref, next, 0)) + continue; + + if (ref->action == next->action) { + mod = next->ref_mod; + } else { + if (ref->ref_mod < next->ref_mod) { + struct btrfs_delayed_ref_node *tmp; + + tmp = ref; + ref = next; + next = tmp; + done = 1; + } + mod = -next->ref_mod; + } + + merged++; + drop_delayed_ref(trans, delayed_refs, next); + ref->ref_mod += mod; + if (ref->ref_mod == 0) { + drop_delayed_ref(trans, delayed_refs, ref); + break; + } else { + /* + * You can't have multiples of the same ref on a tree + * block. + */ + WARN_ON(ref->type == BTRFS_TREE_BLOCK_REF_KEY || + ref->type == BTRFS_SHARED_BLOCK_REF_KEY); + } + + if (done) + break; + node = rb_prev(&ref->rb_node); + } + + return merged; +} + +void btrfs_merge_delayed_refs(struct btrfs_trans_handle *trans, + struct btrfs_fs_info *fs_info, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_head *head) +{ + struct rb_node *node; + u64 seq = 0; + + spin_lock(&fs_info->tree_mod_seq_lock); + if (!list_empty(&fs_info->tree_mod_seq_list)) { + struct seq_list *elem; + + elem = list_first_entry(&fs_info->tree_mod_seq_list, + struct seq_list, list); + seq = elem->seq; + } + spin_unlock(&fs_info->tree_mod_seq_lock); + + node = rb_prev(&head->node.rb_node); + while (node) { + struct btrfs_delayed_ref_node *ref; + + ref = rb_entry(node, struct btrfs_delayed_ref_node, + rb_node); + if (ref->bytenr != head->node.bytenr) + break; + + /* We can't merge refs that are outside of our seq count */ + if (seq && ref->seq >= seq) + break; + if (merge_ref(trans, delayed_refs, ref, seq)) + node = rb_prev(&head->node.rb_node); + else + node = rb_prev(node); + } +} + int btrfs_check_delayed_seq(struct btrfs_fs_info *fs_info, struct btrfs_delayed_ref_root *delayed_refs, u64 seq) @@ -336,18 +444,11 @@ update_existing_ref(struct btrfs_trans_handle *trans, * every changing the extent allocation tree. */ existing->ref_mod--; - if (existing->ref_mod == 0) { - rb_erase(&existing->rb_node, - &delayed_refs->root); - existing->in_tree = 0; - btrfs_put_delayed_ref(existing); - delayed_refs->num_entries--; - if (trans->delayed_ref_updates) - trans->delayed_ref_updates--; - } else { + if (existing->ref_mod == 0) + drop_delayed_ref(trans, delayed_refs, existing); + else WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY || existing->type == BTRFS_SHARED_BLOCK_REF_KEY); - } } else { WARN_ON(existing->type == BTRFS_TREE_BLOCK_REF_KEY || existing->type == BTRFS_SHARED_BLOCK_REF_KEY); diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index 0d7c90c366b6..ab5300595847 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -167,6 +167,10 @@ int btrfs_add_delayed_extent_op(struct btrfs_fs_info *fs_info, struct btrfs_trans_handle *trans, u64 bytenr, u64 num_bytes, struct btrfs_delayed_extent_op *extent_op); +void btrfs_merge_delayed_refs(struct btrfs_trans_handle *trans, + struct btrfs_fs_info *fs_info, + struct btrfs_delayed_ref_root *delayed_refs, + struct btrfs_delayed_ref_head *head); struct btrfs_delayed_ref_head * btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index f16411d3c252..ba58024d40d3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2251,6 +2251,16 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, } } + /* + * We need to try and merge add/drops of the same ref since we + * can run into issues with relocate dropping the implicit ref + * and then it being added back again before the drop can + * finish. If we merged anything we need to re-loop so we can + * get a good ref. + */ + btrfs_merge_delayed_refs(trans, fs_info, delayed_refs, + locked_ref); + /* * locked_ref is the head node, so we have to go one * node back for any delayed ref updates From 68ce9682a4bb95d6be5529cb57214bf2a1b7d20e Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Wed, 1 Aug 2012 05:45:52 -0600 Subject: [PATCH 1003/1098] Btrfs: remove superblock writing after fatal error With commit acce952b0, btrfs was changed to flag the filesystem with BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal error happened like a write I/O errors of all mirrors. In such situations, on unmount, the superblock is written in btrfs_error_commit_super(). This is done with the intention to be able to evaluate the error flag on the next mount. A warning is printed in this case during the next mount and the log tree is ignored. The issue is that it is possible that the superblock points to a root that was not written (due to write I/O errors). The result is that the filesystem cannot be mounted. btrfsck also does not start and all the other btrfs-progs tools fail to start as well. However, mount -o recovery is working well and does the right things to recover the filesystem (i.e., don't use the log root, clear the free space cache and use the next mountable root that is stored in the root backup array). This patch removes the writing of the superblock when BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error flag in the mount function. These lines can be used to reproduce the issue (using /dev/sdm): SCRATCH_DEV=/dev/sdm SCRATCH_MNT=/mnt echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo ls -alLF /dev/mapper/foo mkfs.btrfs /dev/mapper/foo mount /dev/mapper/foo $SCRATCH_MNT echo bar > $SCRATCH_MNT/foo sync echo 0 25165824 error | dmsetup reload foo dmsetup resume foo ls -alF $SCRATCH_MNT touch $SCRATCH_MNT/1 ls -alF $SCRATCH_MNT sleep 35 echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo dmsetup resume foo sleep 1 umount $SCRATCH_MNT btrfsck /dev/mapper/foo dmsetup remove foo Signed-off-by: Stefan Behrens Signed-off-by: Jan Schmidt --- fs/btrfs/disk-io.c | 36 ++++-------------------------------- fs/btrfs/disk-io.h | 2 +- 2 files changed, 5 insertions(+), 33 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index dd86a5d88428..3c4c4397f470 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2527,8 +2527,7 @@ retry_root_backup: goto fail_trans_kthread; /* do not make disk changes in broken FS */ - if (btrfs_super_log_root(disk_super) != 0 && - !(fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR)) { + if (btrfs_super_log_root(disk_super) != 0) { u64 bytenr = btrfs_super_log_root(disk_super); if (fs_devices->rw_devices == 0) { @@ -3188,30 +3187,14 @@ int close_ctree(struct btrfs_root *root) /* clear out the rbtree of defraggable inodes */ btrfs_run_defrag_inodes(fs_info); - /* - * Here come 2 situations when btrfs is broken to flip readonly: - * - * 1. when btrfs flips readonly somewhere else before - * btrfs_commit_super, sb->s_flags has MS_RDONLY flag, - * and btrfs will skip to write sb directly to keep - * ERROR state on disk. - * - * 2. when btrfs flips readonly just in btrfs_commit_super, - * and in such case, btrfs cannot write sb via btrfs_commit_super, - * and since fs_state has been set BTRFS_SUPER_FLAG_ERROR flag, - * btrfs will cleanup all FS resources first and write sb then. - */ if (!(fs_info->sb->s_flags & MS_RDONLY)) { ret = btrfs_commit_super(root); if (ret) printk(KERN_ERR "btrfs: commit super ret %d\n", ret); } - if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) { - ret = btrfs_error_commit_super(root); - if (ret) - printk(KERN_ERR "btrfs: commit super ret %d\n", ret); - } + if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) + btrfs_error_commit_super(root); btrfs_put_block_group_cache(fs_info); @@ -3433,18 +3416,11 @@ static int btrfs_check_super_valid(struct btrfs_fs_info *fs_info, if (read_only) return 0; - if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) { - printk(KERN_WARNING "warning: mount fs with errors, " - "running btrfsck is recommended\n"); - } - return 0; } -int btrfs_error_commit_super(struct btrfs_root *root) +void btrfs_error_commit_super(struct btrfs_root *root) { - int ret; - mutex_lock(&root->fs_info->cleaner_mutex); btrfs_run_delayed_iputs(root); mutex_unlock(&root->fs_info->cleaner_mutex); @@ -3454,10 +3430,6 @@ int btrfs_error_commit_super(struct btrfs_root *root) /* cleanup FS via transaction */ btrfs_cleanup_transaction(root); - - ret = write_ctree_super(NULL, root, 0); - - return ret; } static void btrfs_destroy_ordered_operations(struct btrfs_root *root) diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 95e147eea239..c5b00a735fef 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -54,7 +54,7 @@ int write_ctree_super(struct btrfs_trans_handle *trans, struct btrfs_root *root, int max_mirrors); struct buffer_head *btrfs_read_dev_super(struct block_device *bdev); int btrfs_commit_super(struct btrfs_root *root); -int btrfs_error_commit_super(struct btrfs_root *root); +void btrfs_error_commit_super(struct btrfs_root *root); struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize); struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, From 5ee0844d6427e7338e0aba748f62b62d07ea2ed0 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Mon, 27 Aug 2012 08:30:03 -0600 Subject: [PATCH 1004/1098] Btrfs: revert checksum error statistic which can cause a BUG() Commit 442a4f6308e694e0fa6025708bd5e4e424bbf51c added btrfs device statistic counters for detected IO and checksum errors to Linux 3.5. The statistic part that counts checksum errors in end_bio_extent_readpage() can cause a BUG() in a subfunction: "kernel BUG at fs/btrfs/volumes.c:3762!" That part is reverted with the current patch. However, the counting of checksum errors in the scrub context remains active, and the counting of detected IO errors (read, write or flush errors) in all contexts remains active. Cc: stable # 3.5 Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 17 ++--------------- fs/btrfs/volumes.c | 22 ---------------------- fs/btrfs/volumes.h | 2 -- 3 files changed, 2 insertions(+), 39 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3e7c9ed6505b..49085f2336d2 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2329,23 +2329,10 @@ static void end_bio_extent_readpage(struct bio *bio, int err) if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, state, mirror); - if (ret) { - /* no IO indicated but software detected errors - * in the block, either checksum errors or - * issues with the contents */ - struct btrfs_root *root = - BTRFS_I(page->mapping->host)->root; - struct btrfs_device *device; - + if (ret) uptodate = 0; - device = btrfs_find_device_for_logical( - root, start, mirror); - if (device) - btrfs_dev_stat_inc_and_print(device, - BTRFS_DEV_STAT_CORRUPTION_ERRS); - } else { + else clean_io_failure(start, page); - } } if (!uptodate && tree->ops && tree->ops->readpage_io_failed_hook) { diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0b1e69d380dd..3f4e70e171ed 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4610,28 +4610,6 @@ int btrfs_read_sys_array(struct btrfs_root *root) return ret; } -struct btrfs_device *btrfs_find_device_for_logical(struct btrfs_root *root, - u64 logical, int mirror_num) -{ - struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree; - int ret; - u64 map_length = 0; - struct btrfs_bio *bbio = NULL; - struct btrfs_device *device; - - BUG_ON(mirror_num == 0); - ret = btrfs_map_block(map_tree, WRITE, logical, &map_length, &bbio, - mirror_num); - if (ret) { - BUG_ON(bbio != NULL); - return NULL; - } - BUG_ON(mirror_num != bbio->mirror_num); - device = bbio->stripes[mirror_num - 1].dev; - kfree(bbio); - return device; -} - int btrfs_read_chunk_tree(struct btrfs_root *root) { struct btrfs_path *path; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 5479325987b3..53c06af92e8d 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -289,8 +289,6 @@ int btrfs_cancel_balance(struct btrfs_fs_info *fs_info); int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset); int find_free_dev_extent(struct btrfs_device *device, u64 num_bytes, u64 *start, u64 *max_avail); -struct btrfs_device *btrfs_find_device_for_logical(struct btrfs_root *root, - u64 logical, int mirror_num); void btrfs_dev_stat_print_on_error(struct btrfs_device *device); void btrfs_dev_stat_inc_and_print(struct btrfs_device *dev, int index); int btrfs_get_dev_stats(struct btrfs_root *root, From bd7de2c9a449e26a5493d918618eb20ae60d56bd Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 24 Aug 2012 12:53:03 -0600 Subject: [PATCH 1005/1098] Btrfs: fix deadlock with freeze and sync V2 We can deadlock with freeze right now because we unconditionally start a transaction in our ->sync_fs() call. To fix this just check and see if we have a running transaction to commit. This saves us from the deadlock because at this point we'll have the umount sem for the sb so we're safe from freezes coming in after we've done our check. With this patch the freeze xfstests no longer deadlocks. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/super.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 2e06f124f284..073c2368f459 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -813,7 +813,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait) struct btrfs_trans_handle *trans; struct btrfs_fs_info *fs_info = btrfs_sb(sb); struct btrfs_root *root = fs_info->tree_root; - int ret; trace_btrfs_sync_fs(wait); @@ -824,11 +823,17 @@ int btrfs_sync_fs(struct super_block *sb, int wait) btrfs_wait_ordered_extents(root, 0, 0); - trans = btrfs_start_transaction(root, 0); + spin_lock(&fs_info->trans_lock); + if (!fs_info->running_transaction) { + spin_unlock(&fs_info->trans_lock); + return 0; + } + spin_unlock(&fs_info->trans_lock); + + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); - ret = btrfs_commit_transaction(trans, root); - return ret; + return btrfs_commit_transaction(trans, root); } static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry) From 24c03fa5cf3d02c327cf9f2fc39f72664b1bd7e1 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 22 Aug 2012 20:10:38 -0600 Subject: [PATCH 1006/1098] Btrfs: fix a dio write regression This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9 (Btrfs: lock extents as we map them in DIO). In dio write, we should unlock the section which we didn't do IO on in case that we fall back to buffered write. But we need to not only unlock the section but also cleanup reserved space for the section. This bug was found while running xfstests 133, with this 133 no longer complains. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0808f483dafa..38cda78de5e4 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5992,11 +5992,27 @@ unlock: * in the case of read we need to unlock only the end area that we * aren't using if there is any left over space. */ - if (lockstart < lockend) - clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, lockend, - unlock_bits, 1, 0, &cached_state, GFP_NOFS); - else + if (lockstart < lockend) { + if (create && len < lockend - lockstart) { + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockstart + len - 1, unlock_bits, 1, 0, + &cached_state, GFP_NOFS); + /* + * Beside unlock, we also need to cleanup reserved space + * for the left range by attaching EXTENT_DO_ACCOUNTING. + */ + clear_extent_bit(&BTRFS_I(inode)->io_tree, + lockstart + len, lockend, + unlock_bits | EXTENT_DO_ACCOUNTING, + 1, 0, NULL, GFP_NOFS); + } else { + clear_extent_bit(&BTRFS_I(inode)->io_tree, lockstart, + lockend, unlock_bits, 1, 0, + &cached_state, GFP_NOFS); + } + } else { free_extent_state(cached_state); + } free_extent_map(em); From d280e5be940931c84bb2e9831ead9d02bc785484 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 21 Aug 2012 21:13:25 -0600 Subject: [PATCH 1007/1098] Btrfs: fix ordered extent leak when failing to start a transaction We cannot just return error before freeing ordered extent and releasing reserved space when we fail to start a transacion. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 38cda78de5e4..6ba80b902877 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1882,8 +1882,11 @@ static int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered_extent) trans = btrfs_join_transaction_nolock(root); else trans = btrfs_join_transaction(root); - if (IS_ERR(trans)) - return PTR_ERR(trans); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + trans = NULL; + goto out; + } trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_update_inode_fallback(trans, root, inode); if (ret) /* -ENOMEM or corruption */ From 256dd1bb3750ac5ad49b40887c1691788dc44b33 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 10 Aug 2012 08:58:21 -0600 Subject: [PATCH 1008/1098] Btrfs: fix that repair code is spuriously executed for transid failures If verify_parent_transid() fails for all mirrors, the current code calls repair_io_failure() anyway which means: - that the disk block is rewritten without repairing anything and - that a kernel log message is printed which misleadingly claims that a read error was corrected. This is an example: parent transid verify failed on 615015833600 wanted 110423 found 110424 parent transid verify failed on 615015833600 wanted 110423 found 110424 btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...) It is wrong to ignore the results from verify_parent_transid() and to call repair_eb_io_failure() when the verification of the transids failed. This commit fixes the issue. Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 3c4c4397f470..29c69e60d3b0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -377,9 +377,13 @@ static int btree_read_extent_buffer_pages(struct btrfs_root *root, ret = read_extent_buffer_pages(io_tree, eb, start, WAIT_COMPLETE, btree_get_extent, mirror_num); - if (!ret && !verify_parent_transid(io_tree, eb, + if (!ret) { + if (!verify_parent_transid(io_tree, eb, parent_transid, 0)) - break; + break; + else + ret = -EIO; + } /* * This buffer's crc is fine, but its contents are corrupted, so From 14f0458a41e033dee31ba605137419385c03fc78 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 27 Aug 2012 16:22:49 +1000 Subject: [PATCH 1009/1098] drm/nvc0/copy: check PUNITS to determine which copy engines are disabled On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist. And if what I've seen on Kepler is true of Fermi too, chipsets of the same type can have different PCOPY units available. This should fix a v3.5 regression reported by a number of people effecting suspend/resume on NVC8/NVCE chipsets. Cc: stable@vger.kernel.org [3.5] Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_state.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 1866dbb49979..c61014442aa9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -736,9 +736,11 @@ nouveau_card_init(struct drm_device *dev) } break; case NV_C0: - nvc0_copy_create(dev, 1); + if (!(nv_rd32(dev, 0x022500) & 0x00000200)) + nvc0_copy_create(dev, 1); case NV_D0: - nvc0_copy_create(dev, 0); + if (!(nv_rd32(dev, 0x022500) & 0x00000100)) + nvc0_copy_create(dev, 0); break; default: break; From 4b1c2f41c2dda158bb7a3dded70775a76b581995 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 23 Jul 2012 10:46:11 -0700 Subject: [PATCH 1010/1098] watchdog: fix watchdog-test.c build warning Fix compiler warning by making the function static: Documentation/watchdog/src/watchdog-test.c:34:6: warning: no previous prototype for 'term' Signed-off-by: Randy Dunlap Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/src/watchdog-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 73ff5cc93e05..3da822967ee0 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -31,7 +31,7 @@ static void keep_alive(void) * or "-e" to enable the card. */ -void term(int sig) +static void term(int sig) { close(fd); fprintf(stderr, "Stopping watchdog ticks...\n"); From 3e5531caffcc07b67452c4a8170ffb4c2bd1c9b7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 15:14:12 +0530 Subject: [PATCH 1011/1098] watchdog: da9052: Remove duplicate inclusion of delay.h delay.h header file was included twice. Signed-off-by: Sachin Kamat Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/da9052_wdt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c index 3f75129eb0a9..f7abbaeebcaf 100644 --- a/drivers/watchdog/da9052_wdt.c +++ b/drivers/watchdog/da9052_wdt.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include From 305a3d204aae15eddf1988e50e33aee4119b710d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Wed, 22 Aug 2012 17:02:42 +0200 Subject: [PATCH 1012/1098] drm/radeon: fix reading CB_COLORn_MASK from the CS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index ab74e6b149e7..7799e283811f 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1416,7 +1416,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case R_028118_CB_COLOR6_MASK: case R_02811C_CB_COLOR7_MASK: tmp = (reg - R_028100_CB_COLOR0_MASK) / 4; - track->cb_color_mask[tmp] = ib[idx]; + track->cb_color_mask[tmp] = radeon_get_ib_value(p, idx); if (G_0280A0_TILE_MODE(track->cb_color_info[tmp])) { track->cb_dirty = true; } From 3b5ef597ec40603c368f65d3eb6d9818ed6a7bae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Wed, 22 Aug 2012 17:02:43 +0200 Subject: [PATCH 1013/1098] drm/radeon: initialize tracked CS state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This should help catch uninitialized registers and reject commands because of that. Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 7799e283811f..8866937bd0b4 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -315,7 +315,14 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->cb_color_bo[i] = NULL; track->cb_color_bo_offset[i] = 0xFFFFFFFF; track->cb_color_bo_mc[i] = 0xFFFFFFFF; + track->cb_color_frag_bo[i] = NULL; + track->cb_color_frag_offset[i] = 0xFFFFFFFF; + track->cb_color_tile_bo[i] = NULL; + track->cb_color_tile_offset[i] = 0xFFFFFFFF; + track->cb_color_mask[i] = 0xFFFFFFFF; } + track->nsamples = 16; + track->log_nsamples = 4; track->cb_target_mask = 0xFFFFFFFF; track->cb_shader_mask = 0xFFFFFFFF; track->cb_dirty = true; From 523885dec109188b6bed53ec67362072f13b0d43 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Fri, 24 Aug 2012 14:27:36 +0200 Subject: [PATCH 1014/1098] drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: Marek Olšák Reviewed-by: Jerome Glisse Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_cs.c | 19 +++++++++++++++++-- drivers/gpu/drm/radeon/r600d.h | 8 ++++++++ drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/reg_srcs/r600 | 1 - 4 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 8866937bd0b4..f37676d7f217 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -63,6 +63,7 @@ struct r600_cs_track { u32 cb_color_size_idx[8]; /* unused */ u32 cb_target_mask; u32 cb_shader_mask; /* unused */ + bool is_resolve; u32 cb_color_size[8]; u32 vgt_strmout_en; u32 vgt_strmout_buffer_en; @@ -321,6 +322,7 @@ static void r600_cs_track_init(struct r600_cs_track *track) track->cb_color_tile_offset[i] = 0xFFFFFFFF; track->cb_color_mask[i] = 0xFFFFFFFF; } + track->is_resolve = false; track->nsamples = 16; track->log_nsamples = 4; track->cb_target_mask = 0xFFFFFFFF; @@ -359,6 +361,8 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) volatile u32 *ib = p->ib.ptr; unsigned array_mode; u32 format; + /* When resolve is used, the second colorbuffer has always 1 sample. */ + unsigned nsamples = track->is_resolve && i == 1 ? 1 : track->nsamples; size = radeon_bo_size(track->cb_color_bo[i]) - track->cb_color_bo_offset[i]; format = G_0280A0_FORMAT(track->cb_color_info[i]); @@ -382,7 +386,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) array_check.group_size = track->group_size; array_check.nbanks = track->nbanks; array_check.npipes = track->npipes; - array_check.nsamples = track->nsamples; + array_check.nsamples = nsamples; array_check.blocksize = r600_fmt_get_blocksize(format); if (r600_get_array_mode_alignment(&array_check, &pitch_align, &height_align, &depth_align, &base_align)) { @@ -428,7 +432,7 @@ static int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i) /* check offset */ tmp = r600_fmt_get_nblocksy(format, height) * r600_fmt_get_nblocksx(format, pitch) * - r600_fmt_get_blocksize(format) * track->nsamples; + r600_fmt_get_blocksize(format) * nsamples; switch (array_mode) { default: case V_0280A0_ARRAY_LINEAR_GENERAL: @@ -799,6 +803,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p) */ if (track->cb_dirty) { tmp = track->cb_target_mask; + + /* We must check both colorbuffers for RESOLVE. */ + if (track->is_resolve) { + tmp |= 0xff; + } + for (i = 0; i < 8; i++) { if ((tmp >> (i * 4)) & 0xF) { /* at least one component is enabled */ @@ -1288,6 +1298,11 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) track->nsamples = 1 << tmp; track->cb_dirty = true; break; + case R_028808_CB_COLOR_CONTROL: + tmp = G_028808_SPECIAL_OP(radeon_get_ib_value(p, idx)); + track->is_resolve = tmp == V_028808_SPECIAL_RESOLVE_BOX; + track->cb_dirty = true; + break; case R_0280A0_CB_COLOR0_INFO: case R_0280A4_CB_COLOR1_INFO: case R_0280A8_CB_COLOR2_INFO: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index bdb69a63062f..fa6f37099ba9 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -66,6 +66,14 @@ #define CC_RB_BACKEND_DISABLE 0x98F4 #define BACKEND_DISABLE(x) ((x) << 16) +#define R_028808_CB_COLOR_CONTROL 0x28808 +#define S_028808_SPECIAL_OP(x) (((x) & 0x7) << 4) +#define G_028808_SPECIAL_OP(x) (((x) >> 4) & 0x7) +#define C_028808_SPECIAL_OP 0xFFFFFF8F +#define V_028808_SPECIAL_NORMAL 0x00 +#define V_028808_SPECIAL_DISABLE 0x01 +#define V_028808_SPECIAL_RESOLVE_BOX 0x07 + #define CB_COLOR0_BASE 0x28040 #define CB_COLOR1_BASE 0x28044 #define CB_COLOR2_BASE 0x28048 diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 27d22d709c90..8c593ea82c41 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -63,9 +63,10 @@ * 2.19.0 - r600-eg: MSAA textures * 2.20.0 - r600-si: RADEON_INFO_TIMESTAMP query * 2.21.0 - r600-r700: FMASK and CMASK + * 2.22.0 - r600 only: RESOLVE_BOX allowed */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 21 +#define KMS_DRIVER_MINOR 22 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index f93e45d869f4..20bfbda7b3f1 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -744,7 +744,6 @@ r600 0x9400 0x00028C38 CB_CLRCMP_DST 0x00028C3C CB_CLRCMP_MSK 0x00028C34 CB_CLRCMP_SRC -0x00028808 CB_COLOR_CONTROL 0x0002842C CB_FOG_BLUE 0x00028428 CB_FOG_GREEN 0x00028424 CB_FOG_RED From 4e58591c8961b3e31709313f75819f2eec06e322 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 Aug 2012 19:06:21 -0400 Subject: [PATCH 1015/1098] drm/radeon: don't disable plls that are in use by other crtcs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some plls are shared for DP. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/atombios_crtc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f4d4505fe831..961d366f00eb 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1682,9 +1682,22 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_atom_ss ss; + int i; atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); + for (i = 0; i < rdev->num_crtc; i++) { + if (rdev->mode_info.crtcs[i] && + rdev->mode_info.crtcs[i]->enabled && + i != radeon_crtc->crtc_id && + radeon_crtc->pll_id == rdev->mode_info.crtcs[i]->pll_id) { + /* one other crtc is using this pll don't turn + * off the pll + */ + goto done; + } + } + switch (radeon_crtc->pll_id) { case ATOM_PPLL1: case ATOM_PPLL2: @@ -1701,6 +1714,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) default: break; } +done: radeon_crtc->pll_id = -1; } From 8d1af57ae3c4458ed0de93ef97f388dd1b3239c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 Aug 2012 09:54:56 -0400 Subject: [PATCH 1016/1098] drm/radeon/atom: rework DIG modesetting on DCE3+ The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 109 +++++++++------------ 1 file changed, 47 insertions(+), 62 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index f9bc27fe269a..4a7f95e5550d 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1379,6 +1379,8 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); struct radeon_connector *radeon_connector = NULL; struct radeon_connector_atom_dig *radeon_dig_connector = NULL; @@ -1390,19 +1392,37 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: - /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730) || - ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - if (ASIC_IS_DCE6(rdev)) { - /* It seems we need to call ATOM_ENCODER_CMD_SETUP again - * before reenabling encoder on DPMS ON, otherwise we never - * get picture - */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + if (!connector) + dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + else + dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); + + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + atombios_dig_encoder_setup(encoder, + ATOM_ENCODER_CMD_SETUP_PANEL_MODE, + dig->panel_mode); + if (ext_encoder) { + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + atombios_external_encoder_setup(encoder, ext_encoder, + EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); } atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { + } else if (ASIC_IS_DCE4(rdev)) { + /* setup and enable the encoder */ + atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); + /* enable the transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); + } else { + /* setup and enable the encoder and transmitter */ + atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); + /* some early dce3.2 boards have a bug in their transmitter control table */ + if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { @@ -1420,10 +1440,19 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { + /* disable the transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else + } else if (ASIC_IS_DCE4(rdev)) { + /* disable the transmitter */ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + } else { + /* disable the encoder and transmitter */ + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); + atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); + } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { if (ASIC_IS_DCE4(rdev)) atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0); @@ -1848,10 +1877,12 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder); radeon_encoder->pixel_clock = adjusted_mode->clock; + /* need to call this here rather than in prepare() since we need some crtc info */ + radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); + if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) { if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)) atombios_yuv_setup(encoder, true); @@ -1870,38 +1901,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) { - struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); - struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; - - if (!connector) - dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; - else - dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector); - - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - atombios_dig_encoder_setup(encoder, - ATOM_ENCODER_CMD_SETUP_PANEL_MODE, - dig->panel_mode); - } else if (ASIC_IS_DCE4(rdev)) { - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - /* setup and enable the encoder */ - atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0); - - /* enable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - - /* setup and enable the encoder and transmitter */ - atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: @@ -1922,14 +1922,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, break; } - if (ext_encoder) { - if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) - atombios_external_encoder_setup(encoder, ext_encoder, - EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP); - else - atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE); - } - atombios_apply_encoder_quirks(encoder, adjusted_mode); if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) { @@ -2116,7 +2108,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) } radeon_atom_output_lock(encoder, true); - radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); if (connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); @@ -2137,6 +2128,7 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) static void radeon_atom_encoder_commit(struct drm_encoder *encoder) { + /* need to call this here as we need the crtc set up */ radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON); radeon_atom_output_lock(encoder, false); } @@ -2177,14 +2169,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder) case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: - if (ASIC_IS_DCE4(rdev)) - /* disable the transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - else { - /* disable the encoder and transmitter */ - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0); - atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0); - } + /* handled in dpms */ break; case ENCODER_OBJECT_ID_INTERNAL_DDI: case ENCODER_OBJECT_ID_INTERNAL_DVO1: From c205b232a64fed6d26edd7e40985b396de99a27f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 24 Aug 2012 18:21:21 -0400 Subject: [PATCH 1017/1098] drm/radeon/atom: powergating fixes for DCE6 Power gating is per crtc pair, but the powergating registers should be called individually. The hw handles power up/down properly. The pair is powered up if either crtc in the pair is powered up and the pair is not powered down until both crtcs in the pair are powered down. This simplifies programming and should save additional power as the previous code never actually power gated the crtc pair. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 961d366f00eb..2817101fb167 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -258,7 +258,6 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) radeon_crtc->enabled = true; /* adjust pm to dpms changes BEFORE enabling crtcs */ radeon_pm_compute_clocks(rdev); - /* disable crtc pair power gating before programming */ if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) atombios_powergate_crtc(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_ENABLE); @@ -278,25 +277,8 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) atombios_enable_crtc_memreq(crtc, ATOM_DISABLE); atombios_enable_crtc(crtc, ATOM_DISABLE); radeon_crtc->enabled = false; - /* power gating is per-pair */ - if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) { - struct drm_crtc *other_crtc; - struct radeon_crtc *other_radeon_crtc; - list_for_each_entry(other_crtc, &rdev->ddev->mode_config.crtc_list, head) { - other_radeon_crtc = to_radeon_crtc(other_crtc); - if (((radeon_crtc->crtc_id == 0) && (other_radeon_crtc->crtc_id == 1)) || - ((radeon_crtc->crtc_id == 1) && (other_radeon_crtc->crtc_id == 0)) || - ((radeon_crtc->crtc_id == 2) && (other_radeon_crtc->crtc_id == 3)) || - ((radeon_crtc->crtc_id == 3) && (other_radeon_crtc->crtc_id == 2)) || - ((radeon_crtc->crtc_id == 4) && (other_radeon_crtc->crtc_id == 5)) || - ((radeon_crtc->crtc_id == 5) && (other_radeon_crtc->crtc_id == 4))) { - /* if both crtcs in the pair are off, enable power gating */ - if (other_radeon_crtc->enabled == false) - atombios_powergate_crtc(crtc, ATOM_ENABLE); - break; - } - } - } + if (ASIC_IS_DCE6(rdev) && !radeon_crtc->in_mode_set) + atombios_powergate_crtc(crtc, ATOM_ENABLE); /* adjust pm to dpms changes AFTER disabling crtcs */ radeon_pm_compute_clocks(rdev); break; From 0ceb996c9e729b056977a0f07692b38bbd57bc77 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 27 Aug 2012 17:48:18 -0400 Subject: [PATCH 1018/1098] drm/radeon: rework panel mode setup Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_dp.c | 29 ++++++++++++---------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 7712cf5ab33b..3623b98ed3fe 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -577,30 +577,25 @@ int radeon_dp_get_panel_mode(struct drm_encoder *encoder, struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; + u16 dp_bridge = radeon_connector_encoder_get_dp_bridge_encoder_id(connector); + u8 tmp; if (!ASIC_IS_DCE4(rdev)) return panel_mode; - if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_NUTMEG) - panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; - else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) == - ENCODER_OBJECT_ID_TRAVIS) { - u8 id[6]; - int i; - for (i = 0; i < 6; i++) - id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i); - if (id[0] == 0x73 && - id[1] == 0x69 && - id[2] == 0x76 && - id[3] == 0x61 && - id[4] == 0x72 && - id[5] == 0x54) + if (dp_bridge != ENCODER_OBJECT_ID_NONE) { + /* DP bridge chips */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + if (tmp & 1) + panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) || + (dp_bridge == ENCODER_OBJECT_ID_TRAVIS)) panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE; else - panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; + panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE; } else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { - u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); + /* eDP */ + tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP); if (tmp & 1) panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE; } From 4a2b6662c3632176b4fdf012243dd3751367bf1f Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 28 Aug 2012 16:50:22 -0400 Subject: [PATCH 1019/1098] drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375 Signed-off-by: Jerome Glisse Cc: Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d2e243867ac6..33da8bff8942 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1051,7 +1051,7 @@ int radeon_device_init(struct radeon_device *rdev, if (rdev->flags & RADEON_IS_AGP) rdev->need_dma32 = true; if ((rdev->flags & RADEON_IS_PCI) && - (rdev->family < CHIP_RS400)) + (rdev->family <= CHIP_RS740)) rdev->need_dma32 = true; dma_bits = rdev->need_dma32 ? 32 : 40; From f54b350d89bf16d31593b935bafccf510ff4a708 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 29 Aug 2012 13:24:15 +0200 Subject: [PATCH 1020/1098] drm/radeon: fix double free in radeon_gpu_reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: Christian König Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 33da8bff8942..7a3daebd732d 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1346,12 +1346,15 @@ retry: for (i = 0; i < RADEON_NUM_RINGS; ++i) { radeon_ring_restore(rdev, &rdev->ring[i], ring_sizes[i], ring_data[i]); + ring_sizes[i] = 0; + ring_data[i] = NULL; } r = radeon_ib_ring_tests(rdev); if (r) { dev_err(rdev->dev, "ib ring test failed (%d).\n", r); if (saved) { + saved = false; radeon_suspend(rdev); goto retry; } From 51cd8e6ff265650e35e46b5bcbe2ee381a7a2877 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 28 Aug 2012 19:57:21 -0700 Subject: [PATCH 1021/1098] mm, slab: lock the correct nodelist after reenabling irqs cache_grow() can reenable irqs so the cpu (and node) can change, so ensure that we take list_lock on the correct nodelist. This fixes an issue with commit 072bb0aa5e06 ("mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages") where list_lock for the wrong node was taken after growing the cache. Reported-and-tested-by: Haggai Eran Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- mm/slab.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/slab.c b/mm/slab.c index f8b0d539b482..811af03a14ef 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3260,6 +3260,7 @@ force_grow: /* cache_grow can reenable interrupts, then ac could change. */ ac = cpu_cache_get(cachep); + node = numa_mem_id(); /* no objects in sight? abort */ if (!x && (ac->avail == 0 || force_refill)) From 072a9c48600409d72aeb0d5b29fbb75861a06631 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 24 Aug 2012 21:41:11 +0000 Subject: [PATCH 1022/1098] netpoll: revert 6bdb7fe3104 and fix be_poll() instead Against -net. In the patch "netpoll: re-enable irq in poll_napi()", I tried to fix the following warning: [100718.051041] ------------[ cut here ]------------ [100718.051048] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7d/0xb0() (Not tainted) [100718.051049] Hardware name: ProLiant BL460c G7 ... [100718.051068] Call Trace: [100718.051073] [] ? warn_slowpath_common+0x87/0xc0 [100718.051075] [] ? warn_slowpath_null+0x1a/0x20 [100718.051077] [] ? local_bh_enable_ip+0x7d/0xb0 [100718.051080] [] ? _spin_unlock_bh+0x1b/0x20 [100718.051085] [] ? be_process_mcc+0x74/0x230 [be2net] [100718.051088] [] ? be_poll_tx_mcc+0x16c/0x290 [be2net] [100718.051090] [] ? netpoll_poll_dev+0xd6/0x490 [100718.051095] [] ? bond_poll_controller+0x75/0x80 [bonding] [100718.051097] [] ? netpoll_poll_dev+0x45/0x490 [100718.051100] [] ? ksize+0x19/0x80 [100718.051102] [] ? netpoll_send_skb_on_dev+0x157/0x240 by reenabling IRQ before calling ->poll, but it seems more problems are introduced after that patch: http://ozlabs.org/~akpm/stuff/IMG_20120824_122054.jpg http://marc.info/?l=linux-netdev&m=134563282530588&w=2 So it is safe to fix be2net driver code directly. This patch reverts the offending commit and fixes be_poll() by avoid disabling BH there, this is okay because be_poll() can be called either by poll_napi() which already disables IRQ, or by net_rx_action() which already disables BH. Reported-by: Andrew Morton Reported-by: Sylvain Munaut Cc: Sylvain Munaut Cc: Andrew Morton Cc: David Miller Cc: Sathya Perla Cc: Subbu Seetharaman Cc: Ajit Khaparde Signed-off-by: Cong Wang Tested-by: Sylvain Munaut Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++++-- drivers/net/ethernet/emulex/benet/be_main.c | 2 ++ net/core/netpoll.c | 10 +--------- 3 files changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 7fac97b4bb59..8c63d06ab12b 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter) int num = 0, status = 0; struct be_mcc_obj *mcc_obj = &adapter->mcc_obj; - spin_lock_bh(&adapter->mcc_cq_lock); + spin_lock(&adapter->mcc_cq_lock); while ((compl = be_mcc_compl_get(adapter))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ @@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter) if (num) be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num); - spin_unlock_bh(&adapter->mcc_cq_lock); + spin_unlock(&adapter->mcc_cq_lock); return status; } @@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter) if (be_error(adapter)) return -EIO; + local_bh_disable(); status = be_process_mcc(adapter); + local_bh_enable(); if (atomic_read(&mcc_obj->q.used) == 0) break; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 90a903d83d87..78b8aa8069f0 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work) /* when interrupts are not yet enabled, just reap any pending * mcc completions */ if (!netif_running(adapter->netdev)) { + local_bh_disable(); be_process_mcc(adapter); + local_bh_enable(); goto reschedule; } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 346b1eb83a1f..e4ba3e70c174 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -168,24 +168,16 @@ static void poll_napi(struct net_device *dev) struct napi_struct *napi; int budget = 16; - WARN_ON_ONCE(!irqs_disabled()); - list_for_each_entry(napi, &dev->napi_list, dev_list) { - local_irq_enable(); if (napi->poll_owner != smp_processor_id() && spin_trylock(&napi->poll_lock)) { - rcu_read_lock_bh(); budget = poll_one_napi(rcu_dereference_bh(dev->npinfo), napi, budget); - rcu_read_unlock_bh(); spin_unlock(&napi->poll_lock); - if (!budget) { - local_irq_disable(); + if (!budget) break; - } } - local_irq_disable(); } } From 41fa54377057ab38bc3e08ebb46168a7daf2e63b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 29 Aug 2012 19:48:26 -0400 Subject: [PATCH 1023/1098] drm/radeon: fix dig encoder selection on DCE61 Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 31 ++++++++++++++++++---- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 4a7f95e5550d..6e8803a1170c 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1769,13 +1769,34 @@ static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder) struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc); struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_encoder *test_encoder; - struct radeon_encoder_atom_dig *dig; + struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; uint32_t dig_enc_in_use = 0; - /* DCE4/5 */ - if (ASIC_IS_DCE4(rdev)) { - dig = radeon_encoder->enc_priv; - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE6(rdev)) { + /* DCE6 */ + switch (radeon_encoder->encoder_id) { + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: + if (dig->linkb) + return 1; + else + return 0; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1: + if (dig->linkb) + return 3; + else + return 2; + break; + case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2: + if (dig->linkb) + return 5; + else + return 4; + break; + } + } else if (ASIC_IS_DCE4(rdev)) { + /* DCE4/5 */ + if (ASIC_IS_DCE41(rdev) && !ASIC_IS_DCE61(rdev)) { /* ontario follows DCE4 */ if (rdev->family == CHIP_PALM) { if (dig->linkb) From 4a68a74ba04e7ccf798d45988f4f2d2131fb5063 Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Mon, 13 Aug 2012 16:31:24 +0000 Subject: [PATCH 1024/1098] gma500: Consider CRTC initially active. [this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond Signed-off-by: Alan Cox Cc: stable Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/psb_intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 30dc22a7156c..8033526bb53b 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -1362,6 +1362,9 @@ void psb_intel_crtc_init(struct drm_device *dev, int pipe, (struct drm_connector **) (psb_intel_crtc + 1); psb_intel_crtc->mode_set.num_connectors = 0; psb_intel_cursor_init(dev, psb_intel_crtc); + + /* Set to true so that the pipe is forced off on initial config. */ + psb_intel_crtc->active = true; } int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, From 0a54e939d8c2647c711ef2369c3e73c3b7f3028c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Aug 2012 06:49:11 +0000 Subject: [PATCH 1025/1098] ipvs: fix error return code Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 72bf32a84874..f51013c07b9f 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -1171,8 +1171,10 @@ ip_vs_add_service(struct net *net, struct ip_vs_service_user_kern *u, goto out_err; } svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats); - if (!svc->stats.cpustats) + if (!svc->stats.cpustats) { + ret = -ENOMEM; goto out_err; + } /* I'm the first user of the service */ atomic_set(&svc->usecnt, 0); From ef6acf68c259d907517dcc0ffefcd4e30276ae29 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Aug 2012 06:49:16 +0000 Subject: [PATCH 1026/1098] netfilter: ctnetlink: fix error return code in init path Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index da4fc37a8578..9807f3278fcb 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -2790,7 +2790,8 @@ static int __init ctnetlink_init(void) goto err_unreg_subsys; } - if (register_pernet_subsys(&ctnetlink_net_ops)) { + ret = register_pernet_subsys(&ctnetlink_net_ops); + if (ret < 0) { pr_err("ctnetlink_init: cannot register pernet operations\n"); goto err_unreg_exp_subsys; } From 6fc09f10f12477bdaa54e94f9cb428bef6d81315 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Aug 2012 06:49:17 +0000 Subject: [PATCH 1027/1098] netfilter: nfnetlink_log: fix error return code in init path Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_log.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 592091c1260b..14e2f3903142 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -996,8 +996,10 @@ static int __init nfnetlink_log_init(void) #ifdef CONFIG_PROC_FS if (!proc_create("nfnetlink_log", 0440, - proc_net_netfilter, &nful_file_ops)) + proc_net_netfilter, &nful_file_ops)) { + status = -ENOMEM; goto cleanup_logger; + } #endif return status; From 6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Wed, 8 Aug 2012 23:12:19 +0200 Subject: [PATCH 1028/1098] drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 Author: Adam Jackson Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629 Signed-off-by: Paul Menzel Cc: Cc: Adam Jackson Cc: Ian Pilcher Cc: Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index a8743c399e83..b7ee230572b7 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -87,6 +87,9 @@ static struct edid_quirk { int product_id; u32 quirks; } edid_quirk_list[] = { + /* ASUS VW222S */ + { "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING }, + /* Acer AL1706 */ { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 }, /* Acer F51 */ From 497dcf6fc355f0734faf851662b6957386715d24 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Aug 2012 18:58:01 -0700 Subject: [PATCH 1029/1098] ARM: shmobile: marzen: fixup smsc911x id for regulator dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366c..fcf5a47f4772 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, From 015618b902ae8e28705b7af9b4668615fea48ddd Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 29 Aug 2012 13:17:05 +0200 Subject: [PATCH 1030/1098] ALSA: snd-usb: Fix URB cancellation at stream start Commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") fixed a scheduling-while-atomic bug that happened when snd_usb_endpoint_start was called from the trigger callback, which is an atmic context. However, the patch breaks the idea of the endpoints reference counting, which is the reason why the driver has been refactored lately. Revert that commit and let snd_usb_endpoint_start() take care of the URB cancellation again. As this function is called from both atomic and non-atomic context, add a flag to denote whether the function may sleep. Signed-off-by: Daniel Mack Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 11 +++++++++-- sound/usb/endpoint.h | 2 +- sound/usb/pcm.c | 13 +++++-------- 3 files changed, 15 insertions(+), 11 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index c41181202688..b896c5559524 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -799,7 +799,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, /** * snd_usb_endpoint_start: start an snd_usb_endpoint * - * @ep: the endpoint to start + * @ep: the endpoint to start + * @can_sleep: flag indicating whether the operation is executed in + * non-atomic context * * A call to this function will increment the use count of the endpoint. * In case it is not already running, the URBs for this endpoint will be @@ -809,7 +811,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, * * Returns an error if the URB submission failed, 0 in all other cases. */ -int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep) { int err; unsigned int i; @@ -821,6 +823,11 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; + /* just to be sure */ + deactivate_urbs(ep, 0, can_sleep); + if (can_sleep) + wait_clear_urbs(ep); + ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index ee2723fb174f..a8e60c1408e5 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -13,7 +13,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, struct audioformat *fmt, struct snd_usb_endpoint *sync_ep); -int snd_usb_endpoint_start(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep); void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, int force, int can_sleep, int wait); int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep); diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 62ec808ed792..1546577ae458 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -212,7 +212,7 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface, } } -static int start_endpoints(struct snd_usb_substream *subs) +static int start_endpoints(struct snd_usb_substream *subs, int can_sleep) { int err; @@ -225,7 +225,7 @@ static int start_endpoints(struct snd_usb_substream *subs) snd_printdd(KERN_DEBUG "Starting data EP @%p\n", ep); ep->data_subs = subs; - err = snd_usb_endpoint_start(ep); + err = snd_usb_endpoint_start(ep, can_sleep); if (err < 0) { clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags); return err; @@ -239,7 +239,7 @@ static int start_endpoints(struct snd_usb_substream *subs) snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep); ep->sync_slave = subs->data_endpoint; - err = snd_usb_endpoint_start(ep); + err = snd_usb_endpoint_start(ep, can_sleep); if (err < 0) { clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags); return err; @@ -544,13 +544,10 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->last_frame_number = 0; runtime->delay = 0; - /* clear the pending deactivation on the target EPs */ - deactivate_endpoints(subs); - /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) - return start_endpoints(subs); + return start_endpoints(subs, 1); return 0; } @@ -1175,7 +1172,7 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream switch (cmd) { case SNDRV_PCM_TRIGGER_START: - err = start_endpoints(subs); + err = start_endpoints(subs, 0); if (err < 0) return err; From 6c7080a61fc7b46b3ac8573952b5a3e9d5f68bc4 Mon Sep 17 00:00:00 2001 From: Mark Asselstine Date: Wed, 8 Aug 2012 13:14:36 -0400 Subject: [PATCH 1031/1098] firmware: fix directory creation rule matching with make 3.82 Attempting to run 'firmware_install' with CONFIG_USB_SERIAL_TI=y when using make 3.82 results in an error make[2]: *** No rule to make target `/lib/firmware/./', needed by `/lib/firmware/ti_3410.fw'. Stop. It turns out make 3.82 is picky when matching directory names with trailing slashes as a result, where make 3.81 would handle this correctly make 3.82 does not find the rule needed to create the directory. The './' seen in the error is added by $(dir) for firmware which resides in the base firmware src directory, such as ti_3410.fw.ihex. By performing $(dir) after we prepend the $(INSTALL_FW_PATH) we can ensure we don't end up with a './' in the middle of the path and the directory will be properly created. This change works with make 3.81 and should work with previous versions as well. Signed-off-by: Mark Asselstine Signed-off-by: Michal Marek --- scripts/Makefile.fwinst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index 6bf8e87f1dcf..c3f69ae275d1 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE From 768fd0737f4533635ea351566dff98fd4912b0d8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 28 Aug 2012 10:02:08 +0200 Subject: [PATCH 1032/1098] s390/32: Don't clobber personality flags on exec In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: Mike Frysinger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 32e8449640fa..9b94a160fe7f 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -180,7 +180,8 @@ extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) #ifndef CONFIG_64BIT -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #else /* CONFIG_64BIT */ #define SET_PERSONALITY(ex) \ do { \ From 3683243b2c551e58082b179fd153c7d43ddc503b Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 22 Aug 2012 00:26:47 +0000 Subject: [PATCH 1033/1098] xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX I'm slightly concerned by the "only in exceptional circumstances" comment on __pskb_pull_tail but the structure of an skb just created by netfront shouldn't hit any of the especially slow cases. This approach still does slightly more work than the old way, since if we pull up the entire first frag we now have to shuffle everything down where before we just received into the right place in the first place. Signed-off-by: Ian Campbell Cc: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge Cc: Mel Gorman Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Konrad Rzeszutek Wilk Acked-by: Konrad Rzeszutek Wilk Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 39 ++++++++++---------------------------- 1 file changed, 10 insertions(+), 29 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 30899901aef5..650f79a1f2bd 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -57,8 +57,7 @@ static const struct ethtool_ops xennet_ethtool_ops; struct netfront_cb { - struct page *page; - unsigned offset; + int pull_to; }; #define NETFRONT_SKB_CB(skb) ((struct netfront_cb *)((skb)->cb)) @@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev, struct sk_buff *skb; while ((skb = __skb_dequeue(rxq)) != NULL) { - struct page *page = NETFRONT_SKB_CB(skb)->page; - void *vaddr = page_address(page); - unsigned offset = NETFRONT_SKB_CB(skb)->offset; + int pull_to = NETFRONT_SKB_CB(skb)->pull_to; - memcpy(skb->data, vaddr + offset, - skb_headlen(skb)); - - if (page != skb_frag_page(&skb_shinfo(skb)->frags[0])) - __free_page(page); + __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); @@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget) struct sk_buff_head errq; struct sk_buff_head tmpq; unsigned long flags; - unsigned int len; int err; spin_lock(&np->rx_lock); @@ -955,24 +947,13 @@ err: } } - NETFRONT_SKB_CB(skb)->page = - skb_frag_page(&skb_shinfo(skb)->frags[0]); - NETFRONT_SKB_CB(skb)->offset = rx->offset; + NETFRONT_SKB_CB(skb)->pull_to = rx->status; + if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD) + NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD; - len = rx->status; - if (len > RX_COPY_THRESHOLD) - len = RX_COPY_THRESHOLD; - skb_put(skb, len); - - if (rx->status > len) { - skb_shinfo(skb)->frags[0].page_offset = - rx->offset + len; - skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len); - skb->data_len = rx->status - len; - } else { - __skb_fill_page_desc(skb, 0, NULL, 0, 0); - skb_shinfo(skb)->nr_frags = 0; - } + skb_shinfo(skb)->frags[0].page_offset = rx->offset; + skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status); + skb->data_len = rx->status; i = xennet_fill_frags(np, skb, &tmpq); @@ -999,7 +980,7 @@ err: * receive throughout using the standard receive * buffer size was cut by 25%(!!!). */ - skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len); + skb->truesize += skb->data_len - RX_COPY_THRESHOLD; skb->len += skb->data_len; if (rx->flags & XEN_NETRXF_csum_blank) From 3f509c689a07a4aa989b426893d8491a7ffcc410 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 29 Aug 2012 15:24:09 +0000 Subject: [PATCH 1034/1098] netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: [] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [] ? in4_pton+0x72/0x131 [] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [] ? irq_exit+0x9a/0x9c [] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by: Rafal Fitt Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nf_nat_sip.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index 4ad9cf173992..9c87cde28ff8 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -502,7 +502,10 @@ static unsigned int ip_nat_sdp_media(struct sk_buff *skb, unsigned int dataoff, ret = nf_ct_expect_related(rtcp_exp); if (ret == 0) break; - else if (ret != -EBUSY) { + else if (ret == -EBUSY) { + nf_ct_unexpect_related(rtp_exp); + continue; + } else if (ret < 0) { nf_ct_unexpect_related(rtp_exp); port = 0; break; From e2c53be223aca36cf93eb6a0f6bafa079e78f52b Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 23 Aug 2012 21:46:25 +0000 Subject: [PATCH 1035/1098] gianfar: fix default tx vlan offload feature flag Commit - "b852b72 gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e" disables by default (on mac init) the hw vlan tag insertion. The "features" flags were not updated to reflect this, and "ethtool -K" shows tx-vlan-offload to be "on" by default. Cc: Sebastian Poehn Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4605f7246687..d3233f59a82e 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev) if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->features |= NETIF_F_HW_VLAN_RX; } if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { From 99469c32f79a32d8481f87be0d3c66dad286f4ec Mon Sep 17 00:00:00 2001 From: "xeb@mail.ru" Date: Fri, 24 Aug 2012 01:07:38 +0000 Subject: [PATCH 1036/1098] l2tp: avoid to use synchronize_rcu in tunnel free function Avoid to use synchronize_rcu in l2tp_tunnel_free because context may be atomic. Signed-off-by: Dmitry Kozlov Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 3 +-- net/l2tp/l2tp_core.h | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 393355d37b47..513cab08a986 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1347,11 +1347,10 @@ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel) /* Remove from tunnel list */ spin_lock_bh(&pn->l2tp_tunnel_list_lock); list_del_rcu(&tunnel->list); + kfree_rcu(tunnel, rcu); spin_unlock_bh(&pn->l2tp_tunnel_list_lock); - synchronize_rcu(); atomic_dec(&l2tp_tunnel_count); - kfree(tunnel); } /* Create a socket for the tunnel, if one isn't set up by diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h index a38ec6cdeee1..56d583e083a7 100644 --- a/net/l2tp/l2tp_core.h +++ b/net/l2tp/l2tp_core.h @@ -163,6 +163,7 @@ struct l2tp_tunnel_cfg { struct l2tp_tunnel { int magic; /* Should be L2TP_TUNNEL_MAGIC */ + struct rcu_head rcu; rwlock_t hlist_lock; /* protect session_hlist */ struct hlist_head session_hlist[L2TP_HASH_SIZE]; /* hashed list of sessions, From d821a4c4d11ad160925dab2bb009b8444beff484 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 24 Aug 2012 20:38:11 +0000 Subject: [PATCH 1037/1098] e1000e: DoS while TSO enabled caused by link partner with small MSS With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: Ben Hutchings Signed-off-by: Bruce Allan Cc: Stable [2.6.24+] Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/e1000.h | 1 + drivers/net/ethernet/intel/e1000e/netdev.c | 48 +++++++++++----------- 2 files changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index cd153326c3cf..cb3356c9af80 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -310,6 +310,7 @@ struct e1000_adapter { */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; + u32 tx_fifo_limit; struct napi_struct napi; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 46c3b1f9ff89..d01a099475a1 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3516,6 +3516,15 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } + /* + * Alignment of Tx data is on an arbitrary byte boundary with the + * maximum size per Tx descriptor limited only to the transmit + * allocation of the packet buffer minus 96 bytes with an upper + * limit of 24KB due to receive synchronization limitations. + */ + adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, + 24 << 10); + /* * Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. @@ -4785,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb) return 1; } -#define E1000_MAX_PER_TXD 8192 -#define E1000_MAX_TXD_PWR 12 - static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb, unsigned int first, unsigned int max_per_txd, - unsigned int nr_frags, unsigned int mss) + unsigned int nr_frags) { struct e1000_adapter *adapter = tx_ring->adapter; struct pci_dev *pdev = adapter->pdev; @@ -5023,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) { + BUG_ON(size > tx_ring->count); + if (e1000_desc_unused(tx_ring) >= size) return 0; return __e1000_maybe_stop_tx(tx_ring, size); } -#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1) static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int first; - unsigned int max_per_txd = E1000_MAX_PER_TXD; - unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb_headlen(skb); unsigned int nr_frags; @@ -5056,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, } mss = skb_shinfo(skb)->gso_size; - /* - * The controller does a simple calculation to - * make sure there is enough room in the FIFO before - * initiating the DMA for each buffer. The calc is: - * 4 = ceil(buffer len/mss). To make sure we don't - * overrun the FIFO, adjust the max buffer len if mss - * drops. - */ if (mss) { u8 hdr_len; - max_per_txd = min(mss << 2, max_per_txd); - max_txd_pwr = fls(max_per_txd) - 1; /* * TSO Workaround for 82571/2/3 Controllers -- if skb->data @@ -5097,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, count++; count++; - count += TXD_USE_COUNT(len, max_txd_pwr); + count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); nr_frags = skb_shinfo(skb)->nr_frags; for (f = 0; f < nr_frags; f++) - count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]), - max_txd_pwr); + count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]), + adapter->tx_fifo_limit); if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); @@ -5144,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, tx_flags |= E1000_TX_FLAGS_NO_FCS; /* if count is 0 then mapping error has occurred */ - count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss); + count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit, + nr_frags); if (count) { skb_tx_timestamp(skb); netdev_sent_queue(netdev, skb->len); e1000_tx_queue(tx_ring, tx_flags, count); /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2); - + e1000_maybe_stop_tx(tx_ring, + (MAX_SKB_FRAGS * + DIV_ROUND_UP(PAGE_SIZE, + adapter->tx_fifo_limit) + 2)); } else { dev_kfree_skb_any(skb); tx_ring->buffer_info[first].time_stamp = 0; @@ -6327,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.phy.autoneg_advertised = 0x2f; /* ring size defaults */ - adapter->rx_ring->count = 256; - adapter->tx_ring->count = 256; + adapter->rx_ring->count = E1000_DEFAULT_RXD; + adapter->tx_ring->count = E1000_DEFAULT_TXD; /* * Initial Wake on LAN setting - If APM wake is enabled in From acbb219d5f53821b2d0080d047800410c0420ea1 Mon Sep 17 00:00:00 2001 From: Francesco Ruggeri Date: Fri, 24 Aug 2012 07:38:35 +0000 Subject: [PATCH 1038/1098] net: ipv4: ipmr_expire_timer causes crash when removing net namespace When tearing down a net namespace, ipv4 mr_table structures are freed without first deactivating their timers. This can result in a crash in run_timer_softirq. This patch mimics the corresponding behaviour in ipv6. Locking and synchronization seem to be adequate. We are about to kfree mrt, so existing code should already make sure that no other references to mrt are pending or can be created by incoming traffic. The functions invoked here do not cause new references to mrt or other race conditions to be created. Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive. Both ipmr_expire_process (whose completion we may have to wait in del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock or other synchronizations when needed, and they both only modify mrt. Tested in Linux 3.4.8. Signed-off-by: Francesco Ruggeri Signed-off-by: David S. Miller --- net/ipv4/ipmr.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 8eec8f4a0536..ebdf06f938bf 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -124,6 +124,8 @@ static DEFINE_SPINLOCK(mfc_unres_lock); static struct kmem_cache *mrt_cachep __read_mostly; static struct mr_table *ipmr_new_table(struct net *net, u32 id); +static void ipmr_free_table(struct mr_table *mrt); + static int ip_mr_forward(struct net *net, struct mr_table *mrt, struct sk_buff *skb, struct mfc_cache *cache, int local); @@ -131,6 +133,7 @@ static int ipmr_cache_report(struct mr_table *mrt, struct sk_buff *pkt, vifi_t vifi, int assert); static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb, struct mfc_cache *c, struct rtmsg *rtm); +static void mroute_clean_tables(struct mr_table *mrt); static void ipmr_expire_process(unsigned long arg); #ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES @@ -271,7 +274,7 @@ static void __net_exit ipmr_rules_exit(struct net *net) list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) { list_del(&mrt->list); - kfree(mrt); + ipmr_free_table(mrt); } fib_rules_unregister(net->ipv4.mr_rules_ops); } @@ -299,7 +302,7 @@ static int __net_init ipmr_rules_init(struct net *net) static void __net_exit ipmr_rules_exit(struct net *net) { - kfree(net->ipv4.mrt); + ipmr_free_table(net->ipv4.mrt); } #endif @@ -336,6 +339,13 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id) return mrt; } +static void ipmr_free_table(struct mr_table *mrt) +{ + del_timer_sync(&mrt->ipmr_expire_timer); + mroute_clean_tables(mrt); + kfree(mrt); +} + /* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */ static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v) From 5c879d2094946081af934739850c7260e8b25d3c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 26 Aug 2012 00:35:45 +0000 Subject: [PATCH 1039/1098] bnx2x: fix 57840_MF pci id Commit c3def943c7117d42caaed3478731ea7c3c87190e have added support for new pci ids of the 57840 board, while failing to change the obsolete value in 'pci_ids.h'. This patch does so, allowing the probe of such devices. Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index fc3526077348..6b4565c440c8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2149,7 +2149,7 @@ #define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 #define PCI_DEVICE_ID_NX2_57800_VF 0x16a9 #define PCI_DEVICE_ID_NX2_5706S 0x16aa -#define PCI_DEVICE_ID_NX2_57840_MF 0x16ab +#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4 #define PCI_DEVICE_ID_NX2_5708S 0x16ac #define PCI_DEVICE_ID_NX2_57840_VF 0x16ad #define PCI_DEVICE_ID_NX2_57810_MF 0x16ae From c5ae7d41927dbd208c885d4794e30617ad6cdf12 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Aug 2012 12:33:07 +0000 Subject: [PATCH 1040/1098] ipv4: must use rcu protection while calling fib_lookup Following lockdep splat was reported by Pavel Roskin : [ 1570.586223] =============================== [ 1570.586225] [ INFO: suspicious RCU usage. ] [ 1570.586228] 3.6.0-rc3-wl-main #98 Not tainted [ 1570.586229] ------------------------------- [ 1570.586231] /home/proski/src/linux/net/ipv4/route.c:645 suspicious rcu_dereference_check() usage! [ 1570.586233] [ 1570.586233] other info that might help us debug this: [ 1570.586233] [ 1570.586236] [ 1570.586236] rcu_scheduler_active = 1, debug_locks = 0 [ 1570.586238] 2 locks held by Chrome_IOThread/4467: [ 1570.586240] #0: (slock-AF_INET){+.-...}, at: [] release_sock+0x2c/0xa0 [ 1570.586253] #1: (fnhe_lock){+.-...}, at: [] update_or_create_fnhe+0x2c/0x270 [ 1570.586260] [ 1570.586260] stack backtrace: [ 1570.586263] Pid: 4467, comm: Chrome_IOThread Not tainted 3.6.0-rc3-wl-main #98 [ 1570.586265] Call Trace: [ 1570.586271] [] lockdep_rcu_suspicious+0xfd/0x130 [ 1570.586275] [] update_or_create_fnhe+0x15c/0x270 [ 1570.586278] [] __ip_rt_update_pmtu+0x73/0xb0 [ 1570.586282] [] ip_rt_update_pmtu+0x29/0x90 [ 1570.586285] [] inet_csk_update_pmtu+0x2c/0x80 [ 1570.586290] [] tcp_v4_mtu_reduced+0x2e/0xc0 [ 1570.586293] [] tcp_release_cb+0xa4/0xb0 [ 1570.586296] [] release_sock+0x55/0xa0 [ 1570.586300] [] tcp_sendmsg+0x4af/0xf50 [ 1570.586305] [] inet_sendmsg+0x120/0x230 [ 1570.586308] [] ? inet_sk_rebuild_header+0x40/0x40 [ 1570.586312] [] ? sock_update_classid+0xbd/0x3b0 [ 1570.586315] [] ? sock_update_classid+0x130/0x3b0 [ 1570.586320] [] do_sock_write+0xc5/0xe0 [ 1570.586323] [] sock_aio_write+0x53/0x80 [ 1570.586328] [] do_sync_write+0xa3/0xe0 [ 1570.586332] [] vfs_write+0x165/0x180 [ 1570.586335] [] sys_write+0x45/0x90 [ 1570.586340] [] system_call_fastpath+0x16/0x1b Signed-off-by: Eric Dumazet Reported-by: Pavel Roskin Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 24fd4c596643..82cf2a722b23 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -934,12 +934,14 @@ static u32 __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu) if (mtu < ip_rt_min_pmtu) mtu = ip_rt_min_pmtu; + rcu_read_lock(); if (fib_lookup(dev_net(rt->dst.dev), fl4, &res) == 0) { struct fib_nh *nh = &FIB_RES_NH(res); update_or_create_fnhe(nh, fl4->daddr, 0, mtu, jiffies + ip_rt_mtu_expires); } + rcu_read_unlock(); return mtu; } From 26614ba5445fe31a69068a5e94266fa08b4ee345 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Mon, 27 Aug 2012 03:26:19 +0000 Subject: [PATCH 1041/1098] bnx2x: Move netif_napi_add to the open call Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 -- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 ++++------ 5 files changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 463b9ec57d80..6d1a24acb77e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params { continue; \ else -#define for_each_napi_rx_queue(bp, var) \ - for ((var) = 0; (var) < bp->num_napi_queues; (var)++) - /* Skip OOO FP */ #define for_each_tx_queue(bp, var) \ for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e879e19eb0d6..af20c6ee2cd9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2046,6 +2046,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) */ bnx2x_setup_tc(bp->dev, bp->max_cos); + /* Add all NAPI objects */ + bnx2x_add_all_napi(bp); bnx2x_napi_enable(bp); /* set pf load just before approaching the MCP */ @@ -2408,6 +2410,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index dfa757e74296..21b553229ea4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -792,7 +792,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp) bp->num_napi_queues = bp->num_queues; /* Add NAPI objects */ - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), bnx2x_poll, BNX2X_NAPI_WEIGHT); } @@ -801,7 +801,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp) { int i; - for_each_napi_rx_queue(bp, i) + for_each_rx_queue(bp, i) netif_napi_del(&bnx2x_fp(bp, i, napi)); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index fc4e0e3885b0..c37a68d68090 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2888,11 +2888,9 @@ static void bnx2x_get_channels(struct net_device *dev, */ static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss) { - bnx2x_del_all_napi(bp); bnx2x_disable_msi(bp); BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE; bnx2x_set_int_mode(bp); - bnx2x_add_all_napi(bp); } /** diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 02b5a343b195..5b42275ed033 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8427,6 +8427,8 @@ unload_error: /* Disable HW interrupts, NAPI */ bnx2x_netif_stop(bp, 1); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); /* Release IRQs */ bnx2x_free_irq(bp); @@ -11899,9 +11901,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, */ bnx2x_set_int_mode(bp); - /* Add all NAPI objects */ - bnx2x_add_all_napi(bp); - rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); @@ -11976,9 +11975,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); - /* Delete all NAPI objects */ - bnx2x_del_all_napi(bp); - /* Power on: we can't let PCI layer write to us while we are in D3 */ bnx2x_set_power_state(bp, PCI_D0); @@ -12025,6 +12021,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_tx_disable(bp); bnx2x_netif_stop(bp, 0); + /* Delete all NAPI objects */ + bnx2x_del_all_napi(bp); del_timer_sync(&bp->timer); From 14a15d618743ebc4936fe03073bf0c75024d3a07 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Mon, 27 Aug 2012 03:26:20 +0000 Subject: [PATCH 1042/1098] bnx2x: Correct the ndo_poll_controller call This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: Merav Sicron Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5b42275ed033..21054987257a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11231,10 +11231,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static void poll_bnx2x(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2x_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + } } #endif From ee3c843d0fc21c68ced93b982b5731178a24df68 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 8 Aug 2012 23:03:07 -0700 Subject: [PATCH 1043/1098] ARM: shmobile: armadillo800eva: fixup: sound card detection order Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..ecd8136c5909 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -901,8 +901,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) From e26a6038d3a902cd0bc784fc55571a83d7f9cb79 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:47:00 -0700 Subject: [PATCH 1044/1098] ARM: shmobile: mackerel: fixup usb module order renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-mackerel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e3199..c129542f6aed 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, From 5b423f6a40a0327f9d40bc8b97ce9be266f74368 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 29 Aug 2012 16:25:49 +0000 Subject: [PATCH 1045/1098] netfilter: nf_conntrack: fix racy timer handling with reliable events Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by: Oliver Smith Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_ecache.h | 1 + net/netfilter/nf_conntrack_core.c | 16 +++++++++++----- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index e1ce1048fe5f..4a045cda9c60 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -18,6 +18,7 @@ struct nf_conntrack_ecache { u16 ctmask; /* bitmask of ct events to be delivered */ u16 expmask; /* bitmask of expect events to be delivered */ u32 pid; /* netlink pid of destroyer */ + struct timer_list timeout; }; static inline struct nf_conntrack_ecache * diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index cf4875565d67..2ceec64b19f9 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -249,12 +249,15 @@ static void death_by_event(unsigned long ul_conntrack) { struct nf_conn *ct = (void *)ul_conntrack; struct net *net = nf_ct_net(ct); + struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct); + + BUG_ON(ecache == NULL); if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) { /* bad luck, let's retry again */ - ct->timeout.expires = jiffies + + ecache->timeout.expires = jiffies + (random32() % net->ct.sysctl_events_retry_timeout); - add_timer(&ct->timeout); + add_timer(&ecache->timeout); return; } /* we've got the event delivered, now it's dying */ @@ -268,6 +271,9 @@ static void death_by_event(unsigned long ul_conntrack) void nf_ct_insert_dying_list(struct nf_conn *ct) { struct net *net = nf_ct_net(ct); + struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct); + + BUG_ON(ecache == NULL); /* add this conntrack to the dying list */ spin_lock_bh(&nf_conntrack_lock); @@ -275,10 +281,10 @@ void nf_ct_insert_dying_list(struct nf_conn *ct) &net->ct.dying); spin_unlock_bh(&nf_conntrack_lock); /* set a new timer to retry event delivery */ - setup_timer(&ct->timeout, death_by_event, (unsigned long)ct); - ct->timeout.expires = jiffies + + setup_timer(&ecache->timeout, death_by_event, (unsigned long)ct); + ecache->timeout.expires = jiffies + (random32() % net->ct.sysctl_events_retry_timeout); - add_timer(&ct->timeout); + add_timer(&ecache->timeout); } EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list); From 4fd20570995c46b08711b062c69ab903319d6041 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 30 Aug 2012 07:39:12 +0200 Subject: [PATCH 1046/1098] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c Linux-next has failed to compile for kirkwood since 23 August with: arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function) arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function) Add missing Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d93359379598..be90b7d0e10b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include From 03d2f44e967b3c2cf79a6dfb904c8880616c7f83 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Thu, 30 Aug 2012 17:11:17 -0400 Subject: [PATCH 1047/1098] ALSA: snd-usb: use list_for_each_safe for endpoint resources snd_usb_endpoint_free() frees the structure that contains its argument. Signed-off-by: Pavel Roskin Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai --- sound/usb/card.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index d5b5c3388e28..4a469f0cb6d4 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -553,7 +553,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, struct snd_usb_audio *chip) { struct snd_card *card; - struct list_head *p; + struct list_head *p, *n; if (chip == (void *)-1L) return; @@ -570,7 +570,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, snd_usb_stream_disconnect(p); } /* release the endpoint resources */ - list_for_each(p, &chip->ep_list) { + list_for_each_safe(p, n, &chip->ep_list) { snd_usb_endpoint_free(p); } /* release the midi resources */ From fbcfbf5f673847657ccd98afb4d8e13af7fdc372 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 30 Aug 2012 18:52:29 +0200 Subject: [PATCH 1048/1098] ALSA: snd-usb: restore delay information Parts of commit 294c4fb8 ("ALSA: usb: refine delay information with USB frame counter") were unfortunately lost during the refactoring of the snd-usb driver in 3.5. This patch adds them back, restoring the correct delay information behaviour. Signed-off-by: Daniel Mack Cc: Pierre-Louis Bossart Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 1546577ae458..5ceb8f1d63fb 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1091,7 +1091,16 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, subs->hwptr_done += bytes; if (subs->hwptr_done >= runtime->buffer_size * stride) subs->hwptr_done -= runtime->buffer_size * stride; + + /* update delay with exact number of samples queued */ + runtime->delay = subs->last_delay; runtime->delay += frames; + subs->last_delay = runtime->delay; + + /* realign last_frame_number */ + subs->last_frame_number = usb_get_current_frame_number(subs->dev); + subs->last_frame_number &= 0xFF; /* keep 8 LSBs */ + spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer_length = bytes; if (period_elapsed) @@ -1109,12 +1118,26 @@ static void retire_playback_urb(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime; int stride = runtime->frame_bits >> 3; int processed = urb->transfer_buffer_length / stride; + int est_delay; spin_lock_irqsave(&subs->lock, flags); - if (processed > runtime->delay) - runtime->delay = 0; + est_delay = snd_usb_pcm_delay(subs, runtime->rate); + /* update delay with exact number of samples played */ + if (processed > subs->last_delay) + subs->last_delay = 0; else - runtime->delay -= processed; + subs->last_delay -= processed; + runtime->delay = subs->last_delay; + + /* + * Report when delay estimate is off by more than 2ms. + * The error should be lower than 2ms since the estimate relies + * on two reads of a counter updated every ms. + */ + if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2) + snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n", + est_delay, subs->last_delay); + spin_unlock_irqrestore(&subs->lock, flags); } From 245baf983cc39524cce39c24d01b276e6e653c9e Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 30 Aug 2012 18:52:30 +0200 Subject: [PATCH 1049/1098] ALSA: snd-usb: fix calls to next_packet_size In order to support devices with implicit feedback streaming models, packet sizes are now stored with each individual urb, and the PCM handling code which fills the buffers purely relies on the size fields now. However, calling snd_usb_audio_next_packet_size() for all possible packets in an URB at once, prior to letting the PCM code do its job does in fact not lead to the same behaviour than what the old code did: The PCM code will break its loop once a period boundary is reached, consequently using up less packets that it really could. As snd_usb_audio_next_packet_size() implements a feedback mechanism to the endpoints phase accumulator, the number of calls to that function matters, and when called too often, the data rate runs out of bounds. Fix this by making the next_packet function public, and call it from the PCM code as before if the packet data sizes are not defined. Signed-off-by: Daniel Mack Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 13 +------------ sound/usb/endpoint.h | 1 + sound/usb/pcm.c | 7 ++++++- 3 files changed, 8 insertions(+), 13 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index b896c5559524..d6e2bb49c59c 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -141,7 +141,7 @@ int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep) * * For implicit feedback, next_packet_size() is unused. */ -static int next_packet_size(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) { unsigned long flags; int ret; @@ -177,15 +177,6 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep, ep->retire_data_urb(ep->data_subs, urb); } -static void prepare_outbound_urb_sizes(struct snd_usb_endpoint *ep, - struct snd_urb_ctx *ctx) -{ - int i; - - for (i = 0; i < ctx->packets; ++i) - ctx->packet_size[i] = next_packet_size(ep); -} - /* * Prepare a PLAYBACK urb for submission to the bus. */ @@ -370,7 +361,6 @@ static void snd_complete_urb(struct urb *urb) goto exit_clear; } - prepare_outbound_urb_sizes(ep, ctx); prepare_outbound_urb(ep, ctx); } else { retire_inbound_urb(ep, ctx); @@ -857,7 +847,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep) goto __error; if (usb_pipeout(ep->pipe)) { - prepare_outbound_urb_sizes(ep, urb->context); prepare_outbound_urb(ep, urb->context); } else { prepare_inbound_urb(ep, urb->context); diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index a8e60c1408e5..cbbbdf226d66 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -21,6 +21,7 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep); void snd_usb_endpoint_free(struct list_head *head); int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep); void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, struct snd_usb_endpoint *sender, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 5ceb8f1d63fb..e80b6687f43a 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1029,6 +1029,7 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, struct urb *urb) { struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime; + struct snd_usb_endpoint *ep = subs->data_endpoint; struct snd_urb_ctx *ctx = urb->context; unsigned int counts, frames, bytes; int i, stride, period_elapsed = 0; @@ -1040,7 +1041,11 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, urb->number_of_packets = 0; spin_lock_irqsave(&subs->lock, flags); for (i = 0; i < ctx->packets; i++) { - counts = ctx->packet_size[i]; + if (ctx->packet_size[i]) + counts = ctx->packet_size[i]; + else + counts = snd_usb_endpoint_next_packet_size(ep); + /* set up descriptor */ urb->iso_frame_desc[i].offset = frames * stride; urb->iso_frame_desc[i].length = counts * stride; From 2e4a263ca80a203ac6109f5932722a716c265395 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 30 Aug 2012 18:52:31 +0200 Subject: [PATCH 1050/1098] ALSA: snd-usb: fix cross-interface streaming devices Commit 68e67f40b ("ALSA: snd-usb: move calls to usb_set_interface") saved us some unnecessary calls to snd_usb_set_interface() but ignored the fact that there is at least one device out there which operates on two endpoint in different interfaces simultaniously. Take care for this by catching the case where data and sync endpoints are located on different interfaces and calling snd_usb_set_interface() between the start of the two endpoints. Signed-off-by: Daniel Mack Reported-by: Robert M. Albrecht Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai --- sound/usb/pcm.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index e80b6687f43a..fd5e982fc98c 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -236,6 +236,21 @@ static int start_endpoints(struct snd_usb_substream *subs, int can_sleep) !test_and_set_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) { struct snd_usb_endpoint *ep = subs->sync_endpoint; + if (subs->data_endpoint->iface != subs->sync_endpoint->iface || + subs->data_endpoint->alt_idx != subs->sync_endpoint->alt_idx) { + err = usb_set_interface(subs->dev, + subs->sync_endpoint->iface, + subs->sync_endpoint->alt_idx); + if (err < 0) { + snd_printk(KERN_ERR + "%d:%d:%d: cannot set interface (%d)\n", + subs->dev->devnum, + subs->sync_endpoint->iface, + subs->sync_endpoint->alt_idx, err); + return -EIO; + } + } + snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep); ep->sync_slave = subs->data_endpoint; From b72c200975a4ed579dbf3353019e19528745a29a Mon Sep 17 00:00:00 2001 From: Jaccon Bastiaansen Date: Mon, 27 Aug 2012 11:53:51 +0000 Subject: [PATCH 1051/1098] cs89x0 : packet reception not working The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: Jaccon Bastiaansen Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/cs89x0.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 845b2020f291..138446957786 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); unsigned long flags; + u16 cfg; spin_lock_irqsave(&lp->lock, flags); if (dev->flags & IFF_PROMISC) @@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev) /* in promiscuous mode, we accept errored packets, * so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, - (lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT) - ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL) - : 0)); + cfg = lp->curr_rx_cfg; + if (lp->rx_mode == RX_ALL_ACCEPT) + cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL; + writereg(dev, PP_RxCFG, cfg); spin_unlock_irqrestore(&lp->lock, flags); } From ab6f148de28261682d300662e87b9477f7efc95b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 26 Aug 2012 20:41:38 +0000 Subject: [PATCH 1052/1098] usbnet: fix deadlock in resume A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5132c3941cdf5df09e70df3ed28323212 That is 3.5 Signed-off-by: Oliver Neukum CC: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 8531c1caac28..fd4b26d46fd5 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1573,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf) netif_device_present(dev->net) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_HALT, &dev->flags)) - rx_alloc_submit(dev, GFP_KERNEL); + rx_alloc_submit(dev, GFP_NOIO); if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); From fa026e223df2514b271b20f839ab05d7f21181b9 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Tue, 28 Aug 2012 02:30:32 +0000 Subject: [PATCH 1053/1098] net: qmi_wwan: new device: Foxconn/Novatel E396 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams Cc: Bjørn Mork Cc: Ben Chan Signed-off-by: Aleksander Morgado Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 328397c66730..189e52d2eee6 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -441,6 +441,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ { } /* END */ }; From 48f125ce1cc3ff275f9587b5bf56bf0f90766c7d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Aug 2012 06:49:12 +0000 Subject: [PATCH 1054/1098] net: ipv6: fix error return code Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- net/ipv6/esp6.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 6dc7fd353ef5..282f3723ee19 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -167,8 +167,6 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) struct esp_data *esp = x->data; /* skb is pure payload to encrypt */ - err = -ENOMEM; - aead = esp->aead; alen = crypto_aead_authsize(aead); @@ -203,8 +201,10 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) } tmp = esp_alloc_tmp(aead, nfrags + sglists, seqhilen); - if (!tmp) + if (!tmp) { + err = -ENOMEM; goto error; + } seqhi = esp_tmp_seqhi(tmp); iv = esp_tmp_iv(aead, tmp, seqhilen); From 599901c3e4204e9d9c5a24df5402cd91617a2a26 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 29 Aug 2012 06:49:15 +0000 Subject: [PATCH 1055/1098] net/xfrm/xfrm_state.c: fix error return code Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- net/xfrm/xfrm_state.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 87cd0e4d4282..210be48d8ae3 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1994,8 +1994,10 @@ int __xfrm_init_state(struct xfrm_state *x, bool init_replay) goto error; x->outer_mode = xfrm_get_mode(x->props.mode, family); - if (x->outer_mode == NULL) + if (x->outer_mode == NULL) { + err = -EPROTONOSUPPORT; goto error; + } if (init_replay) { err = xfrm_init_replay(x); From b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Thu, 30 Aug 2012 06:37:32 +0000 Subject: [PATCH 1056/1098] net: ethernet: fix kernel OOPS when remove davinci_mdio module davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: Bin Liu Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index cd7ee204e94a..a9ca4a03d31b 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct davinci_mdio_data *data = dev_get_drvdata(dev); - if (data->bus) + if (data->bus) { + mdiobus_unregister(data->bus); mdiobus_free(data->bus); + } if (data->clk) clk_put(data->clk); From 4c30aa33d4b4ce9a0ee5b32d058a40f4eca2ab63 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 29 Aug 2012 09:35:24 +0800 Subject: [PATCH 1057/1098] gpio: mc9s08dz60: Fix build error if I2C=m Make GPIO_MC9S08DZ60 depend on I2C=y, this fixes below build error: LD init/built-in.o drivers/built-in.o: In function `mc9s08dz60_get_value': clk-fixed-factor.c:(.text+0x7214): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mc9s08dz60_set': clk-fixed-factor.c:(.text+0x727c): undefined reference to `i2c_smbus_read_byte_data' clk-fixed-factor.c:(.text+0x72bc): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mc9s08dz60_i2c_driver_init': clk-fixed-factor.c:(.init.text+0x290): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mc9s08dz60_i2c_driver_exit': clk-fixed-factor.c:(.exit.text+0x2c): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b16c8a72a2e2..ba7926f5c099 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ config GPIO_MC9S08DZ60 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" - depends on I2C && MACH_MX35_3DS + depends on I2C=y && MACH_MX35_3DS help Select this to enable the MC9S08DZ60 GPIO driver From dd2914972e5f6d9c1a687158c0f65b81d239fe37 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 28 Aug 2012 19:30:44 +0800 Subject: [PATCH 1058/1098] gpio: em: Fix checking return value of irq_alloc_descs irq_alloc_descs() returns negative error code on failure. Signed-off-by: Axel Lin Acked-by: Magnus Damm Signed-off-by: Linus Walleij --- drivers/gpio/gpio-em.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index ae37181798b3..ec48ed512628 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) p->irq_base = irq_alloc_descs(pdata->irq_base, 0, pdata->number_of_pins, numa_node_id()); - if (IS_ERR_VALUE(p->irq_base)) { + if (p->irq_base < 0) { dev_err(&pdev->dev, "cannot get irq_desc\n"); - return -ENXIO; + return p->irq_base; } pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n", pdata->gpio_base, pdata->number_of_pins, p->irq_base); From 1146f8822ae6601e24f9072d6cd74f76506142cd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 1 Sep 2012 14:11:22 +0800 Subject: [PATCH 1059/1098] gpio: rdc321x: Prevent removal of modules exporting active GPIOs This driver can be built as a module, set the missing owner field of struct gpio_chip to prevent removal of modules exporting active GPIOs. Signed-off-by: Axel Lin Signed-off-by: Linus Walleij --- drivers/gpio/gpio-rdc321x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c index e97016af6443..b62d443e9a59 100644 --- a/drivers/gpio/gpio-rdc321x.c +++ b/drivers/gpio/gpio-rdc321x.c @@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev) rdc321x_gpio_dev->reg2_data_base = r->start + 0x4; rdc321x_gpio_dev->chip.label = "rdc321x-gpio"; + rdc321x_gpio_dev->chip.owner = THIS_MODULE; rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input; rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config; rdc321x_gpio_dev->chip.get = rdc_gpio_get_value; From cee58483cf56e0ba355fdd97ff5e8925329aa936 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 31 Aug 2012 13:30:06 -0400 Subject: [PATCH 1060/1098] time: Move ktime_t overflow checking into timespec_valid_strict Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: Andreas Bombe Cc: Zhouping Liu Cc: Ingo Molnar Cc: Prarit Bhargava Cc: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: John Stultz Signed-off-by: Linus Torvalds --- include/linux/time.h | 7 +++++++ kernel/time/timekeeping.c | 10 +++++----- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/include/linux/time.h b/include/linux/time.h index b0bbd8f0130d..b51e664c83e7 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -125,6 +125,13 @@ static inline bool timespec_valid(const struct timespec *ts) /* Can't have more nanoseconds then a second */ if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return false; + return true; +} + +static inline bool timespec_valid_strict(const struct timespec *ts) +{ + if (!timespec_valid(ts)) + return false; /* Disallow values that could overflow ktime_t */ if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) return false; diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 0c1485e42be6..34e5eac81424 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -428,7 +428,7 @@ int do_settimeofday(const struct timespec *tv) struct timespec ts_delta, xt; unsigned long flags; - if (!timespec_valid(tv)) + if (!timespec_valid_strict(tv)) return -EINVAL; write_seqlock_irqsave(&tk->lock, flags); @@ -476,7 +476,7 @@ int timekeeping_inject_offset(struct timespec *ts) /* Make sure the proposed value is valid */ tmp = timespec_add(tk_xtime(tk), *ts); - if (!timespec_valid(&tmp)) { + if (!timespec_valid_strict(&tmp)) { ret = -EINVAL; goto error; } @@ -659,7 +659,7 @@ void __init timekeeping_init(void) struct timespec now, boot, tmp; read_persistent_clock(&now); - if (!timespec_valid(&now)) { + if (!timespec_valid_strict(&now)) { pr_warn("WARNING: Persistent clock returned invalid value!\n" " Check your CMOS/BIOS settings.\n"); now.tv_sec = 0; @@ -667,7 +667,7 @@ void __init timekeeping_init(void) } read_boot_clock(&boot); - if (!timespec_valid(&boot)) { + if (!timespec_valid_strict(&boot)) { pr_warn("WARNING: Boot clock returned invalid value!\n" " Check your CMOS/BIOS settings.\n"); boot.tv_sec = 0; @@ -713,7 +713,7 @@ static struct timespec timekeeping_suspend_time; static void __timekeeping_inject_sleeptime(struct timekeeper *tk, struct timespec *delta) { - if (!timespec_valid(delta)) { + if (!timespec_valid_strict(delta)) { printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid " "sleep delta value!\n"); return; From 4cbe5a555fa58a79b6ecbb6c531b8bab0650778d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 1 Sep 2012 10:39:58 -0700 Subject: [PATCH 1061/1098] Linux 3.6-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 354026873b13..371ce8899f5c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Saber-toothed Squirrel # *DOCUMENTATION* From b6d86d3d6d6e4c9b588d81615c81b5a8292b62ed Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 24 Aug 2012 17:25:01 -0700 Subject: [PATCH 1062/1098] linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividends DIV_ROUND_CLOSEST returns a bad result for negative dividends: DIV_ROUND_CLOSEST(-2, 2) = 0 Most of the time this does not matter. However, in the hardware monitoring subsystem, DIV_ROUND_CLOSEST is sometimes used on integers which can be negative (such as temperatures). Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- include/linux/kernel.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 604382143bcf..594b419b7d20 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -82,10 +82,18 @@ __x - (__x % (y)); \ } \ ) + +/* + * Divide positive or negative dividend by positive divisor and round + * to closest integer. Result is undefined for negative divisors. + */ #define DIV_ROUND_CLOSEST(x, divisor)( \ { \ - typeof(divisor) __divisor = divisor; \ - (((x) + ((__divisor) / 2)) / (__divisor)); \ + typeof(x) __x = x; \ + typeof(divisor) __d = divisor; \ + (((typeof(x))-1) >= 0 || (__x) >= 0) ? \ + (((__x) + ((__d) / 2)) / (__d)) : \ + (((__x) - ((__d) / 2)) / (__d)); \ } \ ) From e1b2aa7f3051e268973b6126fdca602ac4af6bc4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 1 Sep 2012 09:57:40 +0000 Subject: [PATCH 1063/1098] fddi: 64 bit bug in smt_add_para() The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/fddi/skfp/pmf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c index 24d8566cfd8b..441b4dc79450 100644 --- a/drivers/net/fddi/skfp/pmf.c +++ b/drivers/net/fddi/skfp/pmf.c @@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para, sm_pm_get_ls(smc,port_to_mib(smc,port))) ; break ; case SMT_P_REASON : - * (u_long *) to = 0 ; + *(u32 *)to = 0 ; sp_len = 4 ; goto sp_done ; case SMT_P1033 : /* time stamp */ From 5002200599429e83fc13e0d9a2d4788b79515b0c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sat, 1 Sep 2012 03:47:26 +0000 Subject: [PATCH 1064/1098] net: qmi_wwan: add several new Gobi devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado Cc: Thomas Tuttle Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 189e52d2eee6..adfab3fc5478 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -413,7 +413,9 @@ static const struct usb_device_id products[] = { /* 5. Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ @@ -441,6 +443,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */ { } /* END */ From 9bfc8da00b1e74f55a52cc06a0d364f1f7f61ed8 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 1 Sep 2012 21:47:11 +0200 Subject: [PATCH 1065/1098] HID: Only dump input if someone is listening Going through the motions of printing the debug message information takes a long time; using the keyboard can lead to a 160 us irqsoff latency. This patch skips hid_dump_input() when there are no open handles, which brings latency down to 100 us. Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8bf8a64e5115..b8485a0106c9 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_driver *hdrv = hid->driver; int ret; - hid_dump_input(hid, usage, value); + if (!list_empty(&hid->debug_list)) + hid_dump_input(hid, usage, value); if (hdrv && hdrv->event && hid_match_usage(hid, usage)) { ret = hdrv->event(hid, field, usage, value); From 28e515878f8896b33c325ff9767cb0237210fb4c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 2 Sep 2012 23:06:52 -0700 Subject: [PATCH 1066/1098] ARM: shmobile: armadillo800eva: enable rw rootfs mount armadillo800eva default boot loader is "hermit", and it's tag->u.core.flags has flag when kernel boots. Because of this, ${LINUX}/arch/arm/kernel/setup.c :: parse_tag_core() didn't remove MS_RDONLY flag from root_mountflags. Thus, the rootfs is mounted as "readonly". This patch adds "rw" kernel parameter, and enable read/write mounts for rootfs Cc: Masahiro Nakai Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/configs/armadillo800eva_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0d..90610c7030f7 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y From 78b495c39add820ab66ab897af9bd77a5f2e91f6 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 3 Sep 2012 17:12:29 +0300 Subject: [PATCH 1067/1098] UBI: fix a horrible memory deallocation bug UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875 UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by: Richard Genoud Tested-by: Richard Genoud Tested-by: Artem Bityutskiy Cc: stable@vger.kernel.org [v2.6.39+] Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/vtbl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 437bc193e170..568307cc7caf 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -340,7 +340,7 @@ retry: * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'. */ err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0); - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); ubi_free_vid_hdr(ubi, vid_hdr); return err; @@ -353,7 +353,7 @@ write_error: list_add(&new_aeb->u.list, &ai->erase); goto retry; } - kfree(new_aeb); + kmem_cache_free(ai->aeb_slab_cache, new_aeb); out_free: ubi_free_vid_hdr(ubi, vid_hdr); return err; From 660d9a9c4f623eeec80cec3705ae872bd5cb556d Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 30 Jul 2012 15:03:02 +0800 Subject: [PATCH 1068/1098] mmc: bfin_sdh: fix dma_desc_array build error Descriptor array structure has been moved into blackfin dma.h head file. This patch fix below error: drivers/mmc/host/bfin_sdh.c:52:8: error: redefinition of 'struct dma_desc_array' make[4]: *** [drivers/mmc/host/bfin_sdh.o] Error 1 Signed-off-by: Sonic Zhang Signed-off-by: Bob Liu Signed-off-by: Chris Ball --- drivers/mmc/host/bfin_sdh.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index 03666174ca48..a17dd7363ceb 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -49,13 +49,6 @@ #define bfin_write_SDH_CFG bfin_write_RSI_CFG #endif -struct dma_desc_array { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; -} __packed; - struct sdh_host { struct mmc_host *mmc; spinlock_t lock; From 1af36b2a993dddfa3d6860ec4879c9e8abc9b976 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Tue, 17 Jul 2012 17:16:09 +0300 Subject: [PATCH 1069/1098] mmc: mxs-mmc: fix deadlock in SDIO IRQ case Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler. Backtrace: [ 79.660000] ============================================= [ 79.660000] [ INFO: possible recursive locking detected ] [ 79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted [ 79.660000] --------------------------------------------- [ 79.660000] swapper/0 is trying to acquire lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xd4 [ 79.660000] [ 79.660000] but task is already holding lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] other info that might help us debug this: [ 79.660000] Possible unsafe locking scenario: [ 79.660000] [ 79.660000] CPU0 [ 79.660000] ---- [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] [ 79.660000] *** DEADLOCK *** [ 79.660000] [ 79.660000] May be due to missing lock nesting notation [ 79.660000] [ 79.660000] 1 lock held by swapper/0: [ 79.660000] #0: (&(&host->lock)->rlock#2){-.....}, at: [] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] stack backtrace: [ 79.660000] [] (unwind_backtrace+0x0/0xf4) from [] (__lock_acquire+0x1948/0x1d48) [ 79.660000] [] (__lock_acquire+0x1948/0x1d48) from [] (lock_acquire+0xe0/0xf8) [ 79.660000] [] (lock_acquire+0xe0/0xf8) from [] (_raw_spin_lock_irqsave+0x44/0x58) [ 79.660000] [] (_raw_spin_lock_irqsave+0x44/0x58) from [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [] (mxs_mmc_irq_handler+0xd4/0xe8) from [] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [] (handle_irq_event_percpu+0x70/0x254) from [] (handle_irq_event+0x3c/0x5c) [ 79.660000] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0x90/0x110) [ 79.660000] [] (handle_level_irq+0x90/0x110) from [] (generic_handle_irq+0x38/0x50) [ 79.660000] [] (generic_handle_irq+0x38/0x50) from [] (handle_IRQ+0x30/0x84) [ 79.660000] [] (handle_IRQ+0x30/0x84) from [] (__irq_svc+0x38/0x60) [ 79.660000] [] (__irq_svc+0x38/0x60) from [] (default_idle+0x2c/0x40) [ 79.660000] [] (default_idle+0x2c/0x40) from [] (cpu_idle+0x64/0xcc) [ 79.660000] [] (cpu_idle+0x64/0xcc) from [] (start_kernel+0x244/0x2c8) [ 79.660000] BUG: spinlock lockup on CPU#0, swapper/0 [ 79.660000] lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 [ 79.660000] [] (unwind_backtrace+0x0/0xf4) from [] (do_raw_spin_lock+0xf0/0x144) [ 79.660000] [] (do_raw_spin_lock+0xf0/0x144) from [] (_raw_spin_lock_irqsave+0x4c/0x58) [ 79.660000] [] (_raw_spin_lock_irqsave+0x4c/0x58) from [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [] (mxs_mmc_irq_handler+0xd4/0xe8) from [] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [] (handle_irq_event_percpu+0x70/0x254) from [] (handle_irq_event+0x3c/0x5c) [ 79.660000] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0x90/0x110) [ 79.660000] [] (handle_level_irq+0x90/0x110) from [] (generic_handle_irq+0x38/0x50) [ 79.660000] [] (generic_handle_irq+0x38/0x50) from [] (handle_IRQ+0x30/0x84) [ 79.660000] [] (handle_IRQ+0x30/0x84) from [] (__irq_svc+0x38/0x60) [ 79.660000] [] (__irq_svc+0x38/0x60) from [] (default_idle+0x2c/0x40) [ 79.660000] [] (default_idle+0x2c/0x40) from [] (cpu_idle+0x64/0xcc) [ 79.660000] [] (cpu_idle+0x64/0xcc) from [] (start_kernel+0x244/0x2c8) Signed-off-by: Lauri Hintsala Acked-by: Shawn Guo Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/mxs-mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index a51f9309ffbb..e62e58e5053d 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) writel(stat & MXS_MMC_IRQ_BITS, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); + spin_unlock(&host->lock); + if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) mmc_signal_sdio_irq(host->mmc); - spin_unlock(&host->lock); - if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ) cmd->error = -ETIMEDOUT; else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ) From fc108d24d3a6da63576a460e122fa1df0cbdea20 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Tue, 17 Jul 2012 17:16:10 +0300 Subject: [PATCH 1070/1098] mmc: mxs-mmc: fix deadlock caused by recursion loop Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_enable_sdio_irq. Backtrace: [ 65.470000] ============================================= [ 65.470000] [ INFO: possible recursive locking detected ] [ 65.470000] 3.5.0-rc5 #2 Not tainted [ 65.470000] --------------------------------------------- [ 65.470000] ksdioirqd/mmc0/73 is trying to acquire lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] but task is already holding lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] other info that might help us debug this: [ 65.470000] Possible unsafe locking scenario: [ 65.470000] [ 65.470000] CPU0 [ 65.470000] ---- [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] [ 65.470000] *** DEADLOCK *** [ 65.470000] [ 65.470000] May be due to missing lock nesting notation [ 65.470000] [ 65.470000] 1 lock held by ksdioirqd/mmc0/73: [ 65.470000] #0: (&(&host->lock)->rlock#2){-.-...}, at: [] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] stack backtrace: [ 65.470000] [] (unwind_backtrace+0x0/0xf4) from [] (__lock_acquire+0x14f8/0x1b98) [ 65.470000] [] (__lock_acquire+0x14f8/0x1b98) from [] (lock_acquire+0xa0/0x108) [ 65.470000] [] (lock_acquire+0xa0/0x108) from [] (_raw_spin_lock_irqsave+0x48/0x5c) [ 65.470000] [] (_raw_spin_lock_irqsave+0x48/0x5c) from [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [] (sdio_irq_thread+0x1bc/0x274) from [] (kthread+0x8c/0x98) [ 65.470000] [] (kthread+0x8c/0x98) from [] (kernel_thread_exit+0x0/0x8) [ 65.470000] BUG: spinlock lockup suspected on CPU#0, ksdioirqd/mmc0/73 [ 65.470000] lock: 0xc3358724, .magic: dead4ead, .owner: ksdioirqd/mmc0/73, .owner_cpu: 0 [ 65.470000] [] (unwind_backtrace+0x0/0xf4) from [] (do_raw_spin_lock+0x100/0x144) [ 65.470000] [] (do_raw_spin_lock+0x100/0x144) from [] (_raw_spin_lock_irqsave+0x50/0x5c) [ 65.470000] [] (_raw_spin_lock_irqsave+0x50/0x5c) from [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [] (sdio_irq_thread+0x1bc/0x274) from [] (kthread+0x8c/0x98) [ 65.470000] [] (kthread+0x8c/0x98) from [] (kernel_thread_exit+0x0/0x8) Reported-by: Attila Kinali Signed-off-by: Lauri Hintsala Acked-by: Shawn Guo Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/mxs-mmc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index e62e58e5053d..ad3fcea1269e 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET); - - if (readl(host->base + HW_SSP_STATUS(host)) & - BM_SSP_STATUS_SDIO_IRQ) - mmc_signal_sdio_irq(host->mmc); - } else { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); @@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) } spin_unlock_irqrestore(&host->lock, flags); + + if (enable && readl(host->base + HW_SSP_STATUS(host)) & + BM_SSP_STATUS_SDIO_IRQ) + mmc_signal_sdio_irq(host->mmc); + } static const struct mmc_host_ops mxs_mmc_ops = { From 74f330bceaa7b88d06062e1cac3d519a3dfc041e Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 23:10:01 +0800 Subject: [PATCH 1071/1098] mmc: sdhci-esdhc: break out early if clock is 0 Since commit 30832ab56 ("mmc: sdhci: Always pass clock request value zero to set_clock host op") was merged, esdhc_set_clock starts hitting "if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated. This causes SDHCI card-detection function being broken. Fix the regression by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation. Signed-off-by: Shawn Guo Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index b97b2f5dafdb..d25f9ab9a54d 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) int div = 1; u32 temp; + if (clock == 0) + goto out; + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - if (clock == 0) - goto out; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) pre_div *= 2; From 077d40731edc90ee9dedf63249034c8cd5f694ce Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 24 Jul 2012 11:42:04 +0200 Subject: [PATCH 1072/1098] mmc: atmel-mci: not busy flag has also to be used for read operations Even if the datasheet says that the not busy flag has to be used only for write operations, it's false except for version lesser than v2xx. Not waiting on the not busy flag for read operations can cause the controller to hang-up during the initialization of some SD cards with DMA after the first CMD6 -- the next command is sent too early. Signed-off-by: Ludovic Desroches Cc: stable [3.5, 3.6] Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 322412cec4ee..a53c7c478e05 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -81,6 +81,7 @@ struct atmel_mci_caps { bool has_bad_data_ordering; bool need_reset_after_xfer; bool need_blksz_mul_4; + bool need_notbusy_for_read_ops; }; struct atmel_mci_dma { @@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv) __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (host->data->flags & MMC_DATA_WRITE) { + if (host->caps.need_notbusy_for_read_ops || + (host->data->flags & MMC_DATA_WRITE)) { atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); state = STATE_WAITING_NOTBUSY; } else if (host->mrq->stop) { @@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_bad_data_ordering = 1; host->caps.need_reset_after_xfer = 1; host->caps.need_blksz_mul_4 = 1; + host->caps.need_notbusy_for_read_ops = 0; /* keep only major version number */ switch (version & 0xf00) { @@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host) case 0x200: host->caps.has_rwproof = 1; host->caps.need_blksz_mul_4 = 0; + host->caps.need_notbusy_for_read_ops = 1; case 0x100: host->caps.has_bad_data_ordering = 0; host->caps.need_reset_after_xfer = 0; From 182c90815993452f1902837cc342ac2c05ef13f5 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:30 +0900 Subject: [PATCH 1073/1098] mmc: dw_mmc: amend using error interrupt status RINTSTS status includes masked interrupts as well as unmasked. data_status and cmd_status are set by value of RINTSTS in interrupt handler and tasklet finally uses it to decide whether error is happened or not. In addition, MINTSTS status is used for setting data_status in PIO. Masked error interrupt will not be handled and that status can be considered non-error case. Signed-off-by: Seungwon Jeon Reviewed By: Girish K S Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 72dc3cde646d..7baed457dc3b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1547,12 +1547,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status) static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) { struct dw_mci *host = dev_id; - u32 status, pending; + u32 pending; unsigned int pass_count = 0; int i; do { - status = mci_readl(host, RINTSTS); pending = mci_readl(host, MINTSTS); /* read-only mask reg */ /* @@ -1570,7 +1569,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_CMD_ERROR_FLAGS) { mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); - host->cmd_status = status; + host->cmd_status = pending; smp_wmb(); set_bit(EVENT_CMD_COMPLETE, &host->pending_events); } @@ -1578,7 +1577,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & DW_MCI_DATA_ERROR_FLAGS) { /* if there is an error report DATA_ERROR */ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS); - host->data_status = status; + host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | @@ -1589,7 +1588,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_DATA_OVER) { mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER); if (!host->data_status) - host->data_status = status; + host->data_status = pending; smp_wmb(); if (host->dir_status == DW_MCI_RECV_STATUS) { if (host->sg != NULL) @@ -1613,7 +1612,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & SDMMC_INT_CMD_DONE) { mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); - dw_mci_cmd_interrupt(host, status); + dw_mci_cmd_interrupt(host, pending); } if (pending & SDMMC_INT_CD) { From 9b2026a12511439d906a5d8d302ae285ebe7378a Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:40 +0900 Subject: [PATCH 1074/1098] mmc: dw_mmc: correct mishandling error interrupt Datasheet of SYNOPSYS mentions that DTO(Data Transfer Over) interrupt will be raised even if some error interrupts, however it is actually found that DTO does not occur. SYNOPSYS has confirmed this issue. Current implementation defers the call of tasklet_schedule until DTO when the error interrupts is happened. This patch fixes error handling. Signed-off-by: Seungwon Jeon Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 7baed457dc3b..1a5db20133ee 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1580,9 +1580,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) host->data_status = pending; smp_wmb(); set_bit(EVENT_DATA_ERROR, &host->pending_events); - if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC | - SDMMC_INT_SBE | SDMMC_INT_EBE))) - tasklet_schedule(&host->tasklet); + tasklet_schedule(&host->tasklet); } if (pending & SDMMC_INT_DATA_OVER) { From e74f3a9c993a088f0a067e13941075e4acb7300a Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 1 Aug 2012 09:30:46 +0900 Subject: [PATCH 1075/1098] mmc: dw_mmc: fix error handling in PIO mode Data transfer will be continued until all the bytes are transmitted, even if data crc error occurs during a multiple-block data transfer. This means RXDR/TXDR interrupts will occurs until data transfer is terminated. Early setting of host->sg to NULL prevents going into xxx_data_pio functions, hence permanent unhandled RXDR/TXDR interrupts occurs. And checking error interrupt status in the xxx_data_pio functions is no need because dw_mci_interrupt does do the same. This patch also removes it. Signed-off-by: Seungwon Jeon Acked-by: Jaehoon Chung Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 29 ++--------------------------- 1 file changed, 2 insertions(+), 27 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 1a5db20133ee..cf8511b80782 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1429,22 +1429,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_RXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/ data->bytes_xfered += nbytes; @@ -1497,23 +1485,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host) nbytes += len; remain -= len; } while (remain); - sg_miter->consumed = offset; + sg_miter->consumed = offset; status = mci_readl(host, MINTSTS); mci_writel(host, RINTSTS, SDMMC_INT_TXDR); - if (status & DW_MCI_DATA_ERROR_FLAGS) { - host->data_status = status; - data->bytes_xfered += nbytes; - sg_miter_stop(sg_miter); - host->sg = NULL; - - smp_wmb(); - - set_bit(EVENT_DATA_ERROR, &host->pending_events); - - tasklet_schedule(&host->tasklet); - return; - } } while (status & SDMMC_INT_TXDR); /* if TXDR write again */ data->bytes_xfered += nbytes; From 9623b5b9192b349bcadb31cce159072a78ac6972 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 25 Jul 2012 08:33:17 -0700 Subject: [PATCH 1076/1098] mmc: dw_mmc: Disable low power mode if SDIO interrupts are used The documentation for the dw_mmc part says that the low power mode should normally only be set for MMC and SD memory and should be turned off for SDIO cards that need interrupts detected. The best place I could find to do this is when the SDIO interrupt was first enabled. I rely on the fact that dw_mci_setup_bus() will be called when it's time to reenable. Signed-off-by: Doug Anderson Acked-by: Seungwon Jeon Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 41 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index cf8511b80782..af40d227bece 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; u32 div; + u32 clk_en_a; if (slot->clock != host->current_speed) { div = host->bus_hz / slot->clock; @@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0); - /* enable clock */ - mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE | - SDMMC_CLKEN_LOW_PWR) << slot->id)); + /* enable clock; only low power if no SDIO */ + clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; + mci_writel(host, CLKENA, clk_en_a); /* inform CIU */ mci_send_cmd(slot, @@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc) return present; } +/* + * Disable lower power mode. + * + * Low power mode will stop the card clock when idle. According to the + * description of the CLKENA register we should disable low power mode + * for SDIO cards if we need SDIO interrupts to work. + * + * This function is fast if low power mode is already disabled. + */ +static void dw_mci_disable_low_power(struct dw_mci_slot *slot) +{ + struct dw_mci *host = slot->host; + u32 clk_en_a; + const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id; + + clk_en_a = mci_readl(host, CLKENA); + + if (clk_en_a & clken_low_pwr) { + mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr); + mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | + SDMMC_CMD_PRV_DAT_WAIT, 0); + } +} + static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) { struct dw_mci_slot *slot = mmc_priv(mmc); @@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) /* Enable/disable Slot Specific SDIO interrupt */ int_mask = mci_readl(host, INTMASK); if (enb) { + /* + * Turn off low power mode if it was enabled. This is a bit of + * a heavy operation and we disable / enable IRQs a lot, so + * we'll leave low power mode disabled and it will get + * re-enabled again in dw_mci_setup_bus(). + */ + dw_mci_disable_low_power(slot); + mci_writel(host, INTMASK, (int_mask | SDMMC_INT_SDIO(slot->id))); } else { From 3550ccdb9d8d350e526b809bf3dd92b550a74fe1 Mon Sep 17 00:00:00 2001 From: Ian Chen Date: Wed, 29 Aug 2012 15:05:36 +0900 Subject: [PATCH 1077/1098] mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption. For several MoviNAND eMMC parts, there are known issues with secure erase and secure trim. For these specific MoviNAND devices, we skip these operations. Specifically, there is a bug in the eMMC firmware that causes unrecoverable corruption when the MMC is erased with MMC_CAP_ERASE enabled. References: http://forum.xda-developers.com/showthread.php?t=1644364 https://plus.google.com/111398485184813224730/posts/21pTYfTsCkB#111398485184813224730/posts/21pTYfTsCkB Signed-off-by: Ian Chen Reviewed-by: Namjae Jeon Acked-by: Jaehoon Chung Reviewed-by: Linus Walleij Cc: stable [3.0+] Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 26 +++++++++++++++++++++++++- include/linux/mmc/card.h | 1 + 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f1c84decb192..172a768036d8 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); - if (req->cmd_flags & REQ_SECURE) + if (req->cmd_flags & REQ_SECURE && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); @@ -1716,6 +1717,7 @@ force_ro_fail: #define CID_MANFID_SANDISK 0x2 #define CID_MANFID_TOSHIBA 0x11 #define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 static const struct mmc_fixup blk_fixups[] = { @@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] = MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, MMC_QUIRK_LONG_READ_TIME), + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + END_FIXUP }; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 111aca5e97f3..4b27f9f503e4 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -239,6 +239,7 @@ struct mmc_card { #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ #define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ +#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 From 75b53aee2f4fe6375c6007226bf68d75b5c4a929 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Aug 2012 06:00:18 +0000 Subject: [PATCH 1078/1098] mmc: omap: fix broken PIO mode After commit 26b88520b80695a6fa5fd95b5d97c03f4daf87e0 ("mmc: omap_hsmmc: remove private DMA API implementation"), the Nokia N800 here stopped booting: [ 2.086181] Waiting for root device /dev/mmcblk0p1... [ 2.324066] Unhandled fault: imprecise external abort (0x406) at 0x00000000 [ 2.331451] Internal error: : 406 [#1] ARM [ 2.335784] Modules linked in: [ 2.339050] CPU: 0 Not tainted (3.6.0-rc3 #60) [ 2.344146] PC is at default_idle+0x28/0x30 [ 2.348602] LR is at trace_hardirqs_on_caller+0x15c/0x1b0 ... This turned out to be due to memory corruption caused by long-broken PIO code in drivers/mmc/host/omap.c. (Previously, this driver had been using DMA; but the above commit caused the MMC driver to fall back to PIO mode with an unmodified Kconfig.) The PIO code, added with the rest of the driver in commit 730c9b7e6630f786fcec026fb11d2e6f2c90fdcb ("[MMC] Add OMAP MMC host driver"), confused bytes with 16-bit words. This bug caused memory located after the PIO transfer buffer to be corrupted with transfers larger than 32 bytes. The driver also did not increment the buffer pointer after the transfer occurred. This bug resulted in data corruption during any transfer larger than 64 bytes. Signed-off-by: Paul Walmsley Reviewed-by: Felipe Balbi Tested-by: Tony Lindgren Signed-off-by: Chris Ball --- drivers/mmc/host/omap.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 50e08f03aa65..a5999a74496a 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -668,7 +668,7 @@ mmc_omap_clk_timer(unsigned long data) static void mmc_omap_xfer_data(struct mmc_omap_host *host, int write) { - int n; + int n, nwords; if (host->buffer_bytes_left == 0) { host->sg_idx++; @@ -678,15 +678,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write) n = 64; if (n > host->buffer_bytes_left) n = host->buffer_bytes_left; + + nwords = n / 2; + nwords += n & 1; /* handle odd number of bytes to transfer */ + host->buffer_bytes_left -= n; host->total_bytes_left -= n; host->data->bytes_xfered += n; if (write) { - __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } else { - __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n); + __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), + host->buffer, nwords); } + + host->buffer += nwords; } static inline void mmc_omap_report_irq(u16 status) From e829c66745e66558b624fd635be4a384fe854944 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 30 Aug 2012 19:22:36 +0200 Subject: [PATCH 1079/1098] ARM: gemini: fix the gemini build Test-compiling obscure machines I notice that the gemini (which by the way lacks a defconfig) is broken since some time back. Adding a simple missing include makes it build again. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-gemini/irq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac..020852d3bdd8 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #define IRQ_SOURCE(base_addr) (base_addr + 0x00) From 79c5fcebfe4021f326a6715009f0b6b622d5df92 Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 7 Jun 2012 16:04:34 -0500 Subject: [PATCH 1080/1098] powerpc/vphn: Fix arch_update_cpu_topology() return value arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 39b159751c35..59213cfaeca9 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu, /* * Update the node maps and sysfs entries for each cpu whose home node - * has changed. + * has changed. Returns 1 when the topology has changed, and 0 otherwise. */ int arch_update_cpu_topology(void) { - int cpu, nid, old_nid; + int cpu, nid, old_nid, changed = 0; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; struct device *dev; @@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void) dev = get_cpu_device(cpu); if (dev) kobject_uevent(&dev->kobj, KOBJ_CHANGE); + changed = 1; } - return 1; + return changed; } static void topology_work_fn(struct work_struct *work) From dabe859ec6360a12e71f39bf695d174e19ff2688 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 13:56:11 +0000 Subject: [PATCH 1081/1098] powerpc: Give hypervisor decrementer interrupts their own handler At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 3 ++- arch/powerpc/kernel/time.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e894515e77bb..39aa97d3ff88 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -186,7 +186,7 @@ hardware_interrupt_hv: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800) MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) - MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer) + STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) @@ -486,6 +486,7 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index be171ee73bf8..e49e93191b69 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } +/* + * Hypervisor decrementer interrupts shouldn't occur but are sometimes + * left pending on exit from a KVM guest. We don't need to do anything + * to clear them, as they are edge-triggered. + */ +void hdec_interrupt(struct pt_regs *regs) +{ +} + #ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs(void) { From 375f561a4131a0f501c8845a2a20f2ca1abc8f7a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 18:51:09 +0000 Subject: [PATCH 1082/1098] powerpc/powernv: Always go into nap mode when CPU is offline The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 1 + arch/powerpc/kernel/idle_power7.S | 2 ++ arch/powerpc/platforms/powernv/smp.c | 10 +--------- 3 files changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 53b6dfa83344..54b73a28c205 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ +extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 7140d838339e..e11863f4e595 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -28,7 +28,9 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + /* fall through */ +_GLOBAL(power7_nap) /* NAP is a state loss, we create a regs frame on the * stack, fill it up with the state we care about and * stick a pointer to it in PACAR1. We really only diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3ef46254c35b..7698b6e13c57 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; - /* If powersave_nap is enabled, use NAP mode, else just - * spin aimlessly - */ - if (!powersave_nap) { - generic_mach_cpu_die(); - return; - } - /* Standard hot unplug procedure */ local_irq_disable(); idle_task_exit(); @@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { - power7_idle(); + power7_nap(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable From 1b6ca2a6fe56e7697d57348646e07df08f43b1bb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:47:56 +0000 Subject: [PATCH 1083/1098] powerpc: Update DSCR on all CPUs when writing sysfs dscr_default Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 3529446c2abd..d4cbbd1fa75f 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -194,6 +194,12 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } +static void update_dscr(void *dummy) +{ + if (!current->thread.dscr_inherit) + mtspr(SPRN_DSCR, dscr_default); +} + static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -206,6 +212,8 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; + on_each_cpu(update_dscr, NULL, 1); + return count; } From 00ca0de02f80924dfff6b4f630e1dff3db005e35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:48:46 +0000 Subject: [PATCH 1084/1098] powerpc: Keep thread.dscr and thread.dscr_inherit in sync When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 4 +++- arch/powerpc/kernel/traps.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d4cbbd1fa75f..8302af649219 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -196,8 +196,10 @@ static ssize_t show_dscr_default(struct device *dev, static void update_dscr(void *dummy) { - if (!current->thread.dscr_inherit) + if (!current->thread.dscr_inherit) { + current->thread.dscr = dscr_default; mtspr(SPRN_DSCR, dscr_default); + } } static ssize_t __used store_dscr_default(struct device *dev, diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 158972341a2d..ae0843fa7a61 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs) cpu_has_feature(CPU_FTR_DSCR)) { PPC_WARN_EMULATED(mtdscr, regs); rd = (instword >> 21) & 0x1f; - mtspr(SPRN_DSCR, regs->gpr[rd]); + current->thread.dscr = regs->gpr[rd]; current->thread.dscr_inherit = 1; + mtspr(SPRN_DSCR, current->thread.dscr); return 0; } #endif From 1021cb268b3025573c4811f1dee4a11260c4507b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:49:47 +0000 Subject: [PATCH 1085/1098] powerpc: Fix DSCR inheritance in copy_thread() If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 710f400476de..1a1f2ddfb581 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { - if (current->thread.dscr_inherit) { - p->thread.dscr_inherit = 1; - p->thread.dscr = current->thread.dscr; - } else if (0 != dscr_default) { - p->thread.dscr_inherit = 1; - p->thread.dscr = dscr_default; - } else { - p->thread.dscr_inherit = 0; - p->thread.dscr = 0; - } + p->thread.dscr_inherit = current->thread.dscr_inherit; + p->thread.dscr = current->thread.dscr; } #endif From 714332858bfd40dcf8f741498336d93875c23aa7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:51:10 +0000 Subject: [PATCH 1086/1098] powerpc: Restore correct DSCR in context switch During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/asm-offsets.c | 1 + arch/powerpc/kernel/entry_64.S | 23 +++++++++++++++++------ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 85b05c463fae..e8995727b1c1 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -76,6 +76,7 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); + DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4b01a25e29ef..b40e0b4815b3 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork) li r3,0 b syscall_exit + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" + /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION + lwz r6,THREAD_DSCR_INHERIT(r4) + ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) - cmpd r0,r25 - beq 1f + cmpwi r6,0 + bne 1f + ld r0,0(r7) +1: cmpd r0,r25 + beq 2f mtspr SPRN_DSCR,r0 -1: +2: END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #endif + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) From 9fb1b36ca1234e64a5d1cc573175303395e3354d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 4 Sep 2012 18:33:08 +0000 Subject: [PATCH 1087/1098] powerpc: Make sure IPI handlers see data written by IPI senders We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dbell.c | 2 ++ arch/powerpc/kernel/smp.c | 11 +++++++++-- arch/powerpc/sysdev/xics/icp-hv.c | 6 +++++- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 5b25c8060fd6..a892680668d8 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void) void doorbell_cause_ipi(int cpu, unsigned long data) { + /* Order previous accesses vs. msgsnd, which is treated as a store */ + mb(); ppc_msgsnd(PPC_DBELL, 0, data); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0321007086f7..8d4214afc21d 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) struct cpu_messages *info = &per_cpu(ipi_message, cpu); char *message = (char *)&info->messages; + /* + * Order previous accesses before accesses in the IPI handler. + */ + smp_mb(); message[msg] = 1; - mb(); + /* + * cause_ipi functions are required to include a full barrier + * before doing whatever causes the IPI. + */ smp_ops->cause_ipi(cpu, info->data); } @@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void) mb(); /* order any irq clear */ do { - all = xchg_local(&info->messages, 0); + all = xchg(&info->messages, 0); #ifdef __BIG_ENDIAN if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION))) diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 14469cf9df68..df0fc5821469 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value) static inline void icp_hv_set_qirr(int n_cpu , u8 value) { int hw_cpu = get_hard_smp_processor_id(n_cpu); - long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + long rc; + + /* Make sure all previous accesses are ordered before IPI sending */ + mb(); + rc = plpar_hcall_norets(H_IPI, hw_cpu, value); if (rc != H_SUCCESS) { pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); From 636802ef96eebe279b22ad9f9dacfe29291e45c7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Sep 2012 15:08:28 +0000 Subject: [PATCH 1088/1098] powerpc: Don't use __put_user() in patch_instruction patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/code-patching.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index dd223b3eb333..17e5b2364312 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr) { int err; - err = __put_user(instr, addr); + __put_user_size(instr, addr, 4, err); if (err) return err; asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); From 50e900417b8096939d12a46848f965e27a905e36 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 4 Sep 2012 15:45:17 -0400 Subject: [PATCH 1089/1098] xen/p2m: Fix one-off error in checking the P2M tree directory. We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES inclusive) when trying to figure out whether we can re-use some of the P2M middle leafs. Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512 we would try to use the 512th entry. Fortunately for us the p2m_top_index has a check for this: BUG_ON(pfn >= MAX_P2M_PFN); which we hit and saw this: (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1.2-OVM x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e033:[] (XEN) RFLAGS: 0000000000000212 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81db5000 rbx: ffffffff81db4000 rcx: 0000000000000000 (XEN) rdx: 0000000000480211 rsi: 0000000000000000 rdi: ffffffff81db4000 (XEN) rbp: ffffffff81793db8 rsp: ffffffff81793d38 r8: 0000000008000000 (XEN) r9: 4000000000000000 r10: 0000000000000000 r11: ffffffff81db7000 (XEN) r12: 0000000000000ff8 r13: ffffffff81df1ff8 r14: ffffffff81db6000 (XEN) r15: 0000000000000ff8 cr0: 000000008005003b cr4: 00000000000026f0 (XEN) cr3: 0000000661795000 cr2: 0000000000000000 Fixes-Oracle-Bug: 14570662 CC: stable@vger.kernel.org # only for v3.5 Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index d4b255463253..76ba0e97e530 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_ if (p2m_index(set_pfn)) return false; - for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { topidx = p2m_top_index(pfn); if (!p2m_top[topidx]) From ce7184bdbd38d920fb515266fbbdc585ad2e5493 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Fri, 24 Aug 2012 08:55:13 +0000 Subject: [PATCH 1090/1098] xen: fix logical error in tlb flushing While TLB_FLUSH_ALL gets passed as 'end' argument to flush_tlb_others(), the Xen code was made to check its 'start' parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not be flushed from TLB. This patch fixed this issue. Reported-by: Jan Beulich Signed-off-by: Alex Shi Acked-by: Jan Beulich Tested-by: Yongjie Ren Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b65a76133f4f..5141d808e751 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask)); args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; - if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { + if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { args->op.cmd = MMUEXT_INVLPG_MULTI; args->op.arg1.linear_addr = start; } From b5031ed1be0aa419250557123633453753181643 Mon Sep 17 00:00:00 2001 From: Ronny Hegewald Date: Fri, 31 Aug 2012 09:57:52 +0000 Subject: [PATCH 1091/1098] xen: Use correct masking in xen_swiotlb_alloc_coherent. When running 32-bit pvops-dom0 and a driver tries to allocate a coherent DMA-memory the xen swiotlb-implementation returned memory beyond 4GB. The underlaying reason is that if the supplied driver passes in a DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff) our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits. By using the dma_alloc_coherent_mask function - it does the proper casting and we get 0xfffffffff. This caused not working sound on a system with 4 GB and a 64-bit compatible sound-card with sets the DMA-mask to 64bit. On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent DMA-memory is always allocated inside the 32-bit address-range by calling dma_alloc_coherent_mask. This patch adds the same functionality to xen swiotlb and is a rebase of the original patch from Ronny Hegewald which never got upstream b/c the underlaying reason was not understood until now. The original email with the original patch is in: http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html the original thread from where the discussion started is in: http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.html Signed-off-by: Ronny Hegewald Signed-off-by: Stefano Panella Acked-By: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk CC: stable@vger.kernel.org --- drivers/xen/swiotlb-xen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 1afb4fba11b4..4d519488d304 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return ret; if (hwdev && hwdev->coherent_dma_mask) - dma_mask = hwdev->coherent_dma_mask; + dma_mask = dma_alloc_coherent_mask(hwdev, flags); phys = virt_to_phys(ret); dev_addr = xen_phys_to_bus(phys); From ed6fe9d614fc1bca95eb8c0ccd0e92db00ef9d5d Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sat, 1 Sep 2012 12:34:07 -0400 Subject: [PATCH 1092/1098] Fix order of arguments to compat_put_time[spec|val] Commit 644595f89620 ("compat: Handle COMPAT_USE_64BIT_TIME in net/socket.c") introduced a bug where the helper functions to take either a 64-bit or compat time[spec|val] got the arguments in the wrong order, passing the kernel stack pointer off as a user pointer (and vice versa). Because of the user address range check, that in turn then causes an EFAULT due to the user pointer range checking failing for the kernel address. Incorrectly resuling in a failed system call for 32-bit processes with a 64-bit kernel. On odder architectures like HP-PA (with separate user/kernel address spaces), it can be used read kernel memory. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- net/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/socket.c b/net/socket.c index a5471f804d99..edc3c4af9085 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2604,7 +2604,7 @@ static int do_siocgstamp(struct net *net, struct socket *sock, err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv); set_fs(old_fs); if (!err) - err = compat_put_timeval(up, &ktv); + err = compat_put_timeval(&ktv, up); return err; } @@ -2620,7 +2620,7 @@ static int do_siocgstampns(struct net *net, struct socket *sock, err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts); set_fs(old_fs); if (!err) - err = compat_put_timespec(up, &kts); + err = compat_put_timespec(&kts, up); return err; } From 8a55ade76551e3927b4e41ee9e7751875d18bc25 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Sep 2012 15:10:08 +0100 Subject: [PATCH 1093/1098] dj: memory scribble in logi_dj Allocate a structure not a pointer to it ! Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/hid/hid-logitech-dj.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 0f9c146fc00d..4d524b5f52f5 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -439,7 +439,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; @@ -456,7 +456,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report; int retval; - dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL); + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; From bc6c83641e1df61cff67748987f95ca62953565e Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 5 Sep 2012 18:38:50 +0200 Subject: [PATCH 1094/1098] uml: fix compile error in deliver_alarm() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile error on UML. arch/um/os-Linux/time.c: In function 'deliver_alarm': arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler' arch/um/os-Linux/internal.h:1:6: note: declared here The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest process") in 3.6-rc1. Signed-off-by: Miklos Szeredi CC: Martin Pärtel Signed-off-by: Linus Torvalds --- arch/um/os-Linux/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index f60238559af3..0748fe0c8a73 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -114,7 +114,7 @@ static void deliver_alarm(void) skew += this_tick - last_tick; while (skew >= one_tick) { - alarm_handler(SIGVTALRM, NULL); + alarm_handler(SIGVTALRM, NULL, NULL); skew -= one_tick; } From 80ba77dfbce85f2d1be54847de3c866de1b18a9a Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 5 Sep 2012 16:35:20 -0400 Subject: [PATCH 1095/1098] xen/pciback: Fix proper FLR steps. When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie Reported-and-Tested-by: Tobias Geiger Signed-off-by: Konrad Rzeszutek Wilk CC: stable@vger.kernel.org --- drivers/xen/xen-pciback/pci_stub.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index 097e536e8672..03342728bf23 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n"); - __pci_reset_function_locked(dev); - /* We need the device active to save the state. */ dev_dbg(&dev->dev, "save state of device\n"); pci_save_state(dev); dev_data->pci_saved_state = pci_store_saved_state(dev); if (!dev_data->pci_saved_state) dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); - + else { + dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n"); + __pci_reset_function_locked(dev); + } /* Now disable the device (this also ensures some private device * data is setup before we export) */ From 80de7c3138ee9fd86a98696fd2cf7ad89b995d0a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 6 Sep 2012 12:01:00 -0400 Subject: [PATCH 1096/1098] Remove user-triggerable BUG from mpol_to_str Trivially triggerable, found by trinity: kernel BUG at mm/mempolicy.c:2546! Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670) Call Trace: show_numa_map+0xd5/0x450 show_pid_numa_map+0x13/0x20 traverse+0xf2/0x230 seq_read+0x34b/0x3e0 vfs_read+0xac/0x180 sys_pread64+0xa2/0xc0 system_call_fastpath+0x1a/0x1f RIP: mpol_to_str+0x156/0x360 Cc: stable@vger.kernel.org Signed-off-by: Dave Jones Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index bd92431d4c49..4ada3be6e252 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2562,7 +2562,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context) break; default: - BUG(); + return -EINVAL; } l = strlen(policy_modes[mode]); From aad932e75c573aec37a0652ff1c27a975d8d5373 Mon Sep 17 00:00:00 2001 From: Andres Freund Date: Thu, 30 Aug 2012 14:37:14 +0200 Subject: [PATCH 1097/1098] HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured c1dcad2d32d0252e8a3023d20311b52a187ecda3 added a new driver configured by HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which lead to a recognized but non-working device if the new driver wasn't configured (which is the correct default). Signed-off-by: Andres Freund Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b8485a0106c9..8bcd168fffae 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1559,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) }, - { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD) + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) }, +#endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) }, From 55d512e245bc7699a8800e23df1a24195dd08217 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 8 Sep 2012 16:43:45 -0700 Subject: [PATCH 1098/1098] Linux 3.6-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 371ce8899f5c..0f66f146d57e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION*