mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
ARM: dts: Add basic dm816x device tree configuration
Similar to other omap variants, let's add dm816x support. Note that this is based on generated data from the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html I've verified the basic functionality, but have not been able to test all the devices on dm8168-evm. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
7300bfff88
commit
7800064ba5
386
arch/arm/boot/dts/dm816x.dtsi
Normal file
386
arch/arm/boot/dts/dm816x.dtsi
Normal file
@ -0,0 +1,386 @@
|
||||
/*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/omap.h>
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,dm816";
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
serial2 = &uart3;
|
||||
ethernet0 = ð0;
|
||||
ethernet1 = ð1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu@0 {
|
||||
compatible = "arm,cortex-a8";
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a8-pmu";
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
/*
|
||||
* The soc node represents the soc top level view. It is used for IPs
|
||||
* that are not memory mapped in the MPU view or for the MPU itself.
|
||||
*/
|
||||
soc {
|
||||
compatible = "ti,omap-infra";
|
||||
mpu {
|
||||
compatible = "ti,omap3-mpu";
|
||||
ti,hwmods = "mpu";
|
||||
};
|
||||
};
|
||||
|
||||
dm816x_pinmux: pinmux@44e10800 {
|
||||
compatible = "pinctrl-single";
|
||||
reg = <0x48140800 0x50a>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-single,register-width = <16>;
|
||||
pinctrl-single,function-mask = <0xf>;
|
||||
};
|
||||
|
||||
/*
|
||||
* XXX: Use a flat representation of the dm816x interconnect.
|
||||
* The real dm816x interconnect network is quite complex. Since
|
||||
* it will not bring real advantage to represent that in DT
|
||||
* for the moment, just use a fake OCP bus entry to represent
|
||||
* the whole bus hierarchy.
|
||||
*/
|
||||
ocp {
|
||||
compatible = "ti,omap3-l3-smx", "simple-bus";
|
||||
reg = <0x44000000 0x10000>;
|
||||
interrupts = <9 10>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
ti,hwmods = "l3_main";
|
||||
|
||||
prcm: prcm@48180000 {
|
||||
compatible = "ti,dm816-prcm";
|
||||
reg = <0x48180000 0x4000>;
|
||||
|
||||
prcm_clocks: clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
prcm_clockdomains: clockdomains {
|
||||
};
|
||||
};
|
||||
|
||||
scrm: scrm@48140000 {
|
||||
compatible = "ti,dm816-scrm";
|
||||
reg = <0x48140000 0x21000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x48140000 0x21000>;
|
||||
|
||||
scrm_clocks: clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
scrm_clockdomains: clockdomains {
|
||||
};
|
||||
};
|
||||
|
||||
cm: syscon@44e10000 {
|
||||
compatible = "ti,am33xx-controlmodule", "syscon";
|
||||
reg = <0x44e10000 0x800>;
|
||||
};
|
||||
|
||||
edma: edma@49000000 {
|
||||
compatible = "ti,edma3";
|
||||
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
|
||||
reg = <0x49000000 0x10000>,
|
||||
<0x44e10f90 0x40>;
|
||||
interrupts = <12 13 14>;
|
||||
#dma-cells = <1>;
|
||||
};
|
||||
|
||||
elm: elm@48080000 {
|
||||
compatible = "ti,816-elm";
|
||||
ti,hwmods = "elm";
|
||||
reg = <0x48080000 0x2000>;
|
||||
interrupts = <4>;
|
||||
};
|
||||
|
||||
gpio1: gpio@48032000 {
|
||||
compatible = "ti,omap3-gpio";
|
||||
ti,hwmods = "gpio1";
|
||||
reg = <0x48032000 0x1000>;
|
||||
interrupts = <97>;
|
||||
};
|
||||
|
||||
gpio2: gpio@4804c000 {
|
||||
compatible = "ti,omap3-gpio";
|
||||
ti,hwmods = "gpio2";
|
||||
reg = <0x4804c000 0x1000>;
|
||||
interrupts = <99>;
|
||||
};
|
||||
|
||||
gpmc: gpmc@50000000 {
|
||||
compatible = "ti,am3352-gpmc";
|
||||
ti,hwmods = "gpmc";
|
||||
reg = <0x50000000 0x2000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
interrupts = <100>;
|
||||
gpmc,num-cs = <6>;
|
||||
gpmc,num-waitpins = <2>;
|
||||
};
|
||||
|
||||
i2c1: i2c@48028000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
ti,hwmods = "i2c1";
|
||||
reg = <0x48028000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <70>;
|
||||
dmas = <&edma 58 &edma 59>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
i2c2: i2c@4802a000 {
|
||||
compatible = "ti,omap4-i2c";
|
||||
ti,hwmods = "i2c2";
|
||||
reg = <0x4802a000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <71>;
|
||||
dmas = <&edma 60 &edma 61>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
intc: interrupt-controller@48200000 {
|
||||
compatible = "ti,dm816-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x48200000 0x1000>;
|
||||
};
|
||||
|
||||
mailbox: mailbox@480c8000 {
|
||||
compatible = "ti,omap4-mailbox";
|
||||
reg = <0x480c8000 0x2000>;
|
||||
interrupts = <77>;
|
||||
ti,hwmods = "mailbox";
|
||||
ti,mbox-num-users = <4>;
|
||||
ti,mbox-num-fifos = <12>;
|
||||
mbox_dsp: mbox_dsp {
|
||||
ti,mbox-tx = <3 0 0>;
|
||||
ti,mbox-rx = <0 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio@4a100800 {
|
||||
compatible = "ti,davinci_mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x4a100800 0x100>;
|
||||
ti,hwmods = "davinci_mdio";
|
||||
bus_freq = <1000000>;
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <1>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
eth0: ethernet@4a100000 {
|
||||
compatible = "ti,dm816-emac";
|
||||
ti,hwmods = "emac0";
|
||||
reg = <0x4a100000 0x800
|
||||
0x4a100900 0x3700>;
|
||||
clocks = <&sysclk24_ck>;
|
||||
ti,davinci-ctrl-reg-offset = <0>;
|
||||
ti,davinci-ctrl-mod-reg-offset = <0x900>;
|
||||
ti,davinci-ctrl-ram-offset = <0x2000>;
|
||||
ti,davinci-ctrl-ram-size = <0x2000>;
|
||||
interrupts = <40 41 42 43>;
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
eth1: ethernet@4a120000 {
|
||||
compatible = "ti,dm816-emac";
|
||||
ti,hwmods = "emac1";
|
||||
reg = <0x4a120000 0x4000>;
|
||||
clocks = <&sysclk24_ck>;
|
||||
ti,davinci-ctrl-reg-offset = <0>;
|
||||
ti,davinci-ctrl-mod-reg-offset = <0x900>;
|
||||
ti,davinci-ctrl-ram-offset = <0x2000>;
|
||||
ti,davinci-ctrl-ram-size = <0x2000>;
|
||||
interrupts = <44 45 46 47>;
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
mcspi1: spi@48030000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x48030000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <65>;
|
||||
ti,spi-num-cs = <4>;
|
||||
ti,hwmods = "mcspi1";
|
||||
dmas = <&edma 16 &edma 17
|
||||
&edma 18 &edma 19>;
|
||||
dma-names = "tx0", "rx0", "tx1", "rx1";
|
||||
};
|
||||
|
||||
mmc1: mmc@48060000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x48060000 0x11000>;
|
||||
ti,hwmods = "mmc1";
|
||||
interrupts = <64>;
|
||||
dmas = <&edma 24 &edma 25>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
timer1: timer@4802e000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x4802e000 0x2000>;
|
||||
interrupts = <67>;
|
||||
ti,hwmods = "timer1";
|
||||
ti,timer-alwon;
|
||||
};
|
||||
|
||||
timer2: timer@48040000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x48040000 0x2000>;
|
||||
interrupts = <68>;
|
||||
ti,hwmods = "timer2";
|
||||
};
|
||||
|
||||
timer3: timer@48042000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x48042000 0x2000>;
|
||||
interrupts = <69>;
|
||||
ti,hwmods = "timer3";
|
||||
};
|
||||
|
||||
timer4: timer@48044000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x48044000 0x2000>;
|
||||
interrupts = <92>;
|
||||
ti,hwmods = "timer4";
|
||||
};
|
||||
|
||||
timer5: timer@48046000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x48046000 0x2000>;
|
||||
interrupts = <93>;
|
||||
ti,hwmods = "timer5";
|
||||
};
|
||||
|
||||
timer6: timer@48048000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x48048000 0x2000>;
|
||||
interrupts = <94>;
|
||||
ti,hwmods = "timer6";
|
||||
};
|
||||
|
||||
timer7: timer@4804a000 {
|
||||
compatible = "ti,dm816-timer";
|
||||
reg = <0x4804a000 0x2000>;
|
||||
interrupts = <95>;
|
||||
ti,hwmods = "timer7";
|
||||
};
|
||||
|
||||
uart1: uart@48020000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
ti,hwmods = "uart1";
|
||||
reg = <0x48020000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <72>;
|
||||
dmas = <&edma 26 &edma 27>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
uart2: uart@48022000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
ti,hwmods = "uart2";
|
||||
reg = <0x48022000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <73>;
|
||||
dmas = <&edma 28 &edma 29>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
uart3: uart@48024000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
ti,hwmods = "uart3";
|
||||
reg = <0x48024000 0x2000>;
|
||||
clock-frequency = <48000000>;
|
||||
interrupts = <74>;
|
||||
dmas = <&edma 30 &edma 31>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
/* NOTE: USB needs a transceiver driver for phys to work */
|
||||
usb: usb_otg_hs@47401000 {
|
||||
compatible = "ti,am33xx-usb";
|
||||
reg = <0x47401000 0x400000>;
|
||||
ranges;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ti,hwmods = "usb_otg_hs";
|
||||
|
||||
usb0: usb@47401000 {
|
||||
compatible = "ti,musb-am33xx";
|
||||
reg = <0x47401400 0x400
|
||||
0x47401000 0x200>;
|
||||
reg-names = "mc", "control";
|
||||
interrupts = <18>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
mentor,power = <500>;
|
||||
};
|
||||
|
||||
usb1: usb@47401800 {
|
||||
compatible = "ti,musb-am33xx";
|
||||
status = "disabled";
|
||||
reg = <0x47401c00 0x400
|
||||
0x47401800 0x200>;
|
||||
reg-names = "mc", "control";
|
||||
interrupts = <19>;
|
||||
interrupt-names = "mc";
|
||||
dr_mode = "otg";
|
||||
mentor,multipoint = <1>;
|
||||
mentor,num-eps = <16>;
|
||||
mentor,ram-bits = <12>;
|
||||
mentor,power = <500>;
|
||||
};
|
||||
};
|
||||
|
||||
wd_timer2: wd_timer@480c2000 {
|
||||
compatible = "ti,omap3-wdt";
|
||||
ti,hwmods = "wd_timer";
|
||||
reg = <0x480c2000 0x1000>;
|
||||
interrupts = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
Loading…
Reference in New Issue
Block a user