renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code

tty/serial: atmel: Remove AVR32 bits from the driver

Browse Source 
AVR32 is gone. Now it's time to clean up the driver by removing
leftovers that was used by AVR32 related code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Andy Shevchenko 2017-06-07 18:19:31 +03:00 committed by Greg Kroah-Hartman
parent 1c65a879cc
commit 72ce5732ee
4 changed files with 11 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
MAINTAINERS
View File

@ -8438,7 +8438,7 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
F: arch/microblaze/
MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER
MICROCHIP / ATMEL AT91 SERIAL DRIVER
M: Richard Genoud <richard.genoud@gmail.com>
S: Maintained
F: drivers/tty/serial/atmel_serial.c

16
drivers/tty/serial/Kconfig
View File

@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE
If unsure, say Y.
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
bool "AT91 on-chip serial port support"
depends on HAS_DMA
depends on ARCH_AT91 || AVR32 || COMPILE_TEST
depends on ARCH_AT91 || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
AT91 processors.
config SERIAL_ATMEL_CONSOLE
bool "Support for console on AT91 / AT32 serial port"
bool "Support for console on AT91 serial port"
depends on SERIAL_ATMEL=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use an on-chip UART on a Atmel
AT91 or AT32 processor as the system console (the system
AT91 processor as the system console (the system
console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
config SERIAL_ATMEL_PDC
bool "Support DMA transfers on AT91 / AT32 serial port"
bool "Support DMA transfers on AT91 serial port"
depends on SERIAL_ATMEL
default y
help
Say Y here if you wish to use the PDC to do DMA transfers to
and from the Atmel AT91 / AT32 serial port. In order to
and from the Atmel AT91 serial port. In order to
actually use DMA transfers, make sure that the use_dma_tx
and use_dma_rx members in the atmel_uart_data struct is set
appropriately for each port.
@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT
bool "Install as device ttyATn instead of ttySn"
depends on SERIAL_ATMEL=y
help
Say Y here if you wish to have the internal AT91 / AT32 UARTs
Say Y here if you wish to have the internal AT91 UARTs
appear as /dev/ttyATn (major 204, minor starting at 154)
instead of the normal /dev/ttySn (major 4, minor starting at
64). This is necessary if you also want other UARTs, such as

20
drivers/tty/serial/atmel_serial.c
View File

@ -1,5 +1,5 @@
/*
* Driver for Atmel AT91 / AT32 Serial ports
* Driver for Atmel AT91 Serial ports
* Copyright (C) 2003 Rick Bronson
*
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
@ -119,7 +119,6 @@ struct atmel_uart_char {
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
* avr32: 4
* samx7: 3 USARTs and 5 UARTs
*/
#define ATMEL_MAX_UART 8
@ -229,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value)
__raw_writel(value, port->membase + reg);
}
#ifdef CONFIG_AVR32
/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */
static inline u8 atmel_uart_read_char(struct uart_port *port)
{
return __raw_readl(port->membase + ATMEL_US_RHR);
}
static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
{
__raw_writel(value, port->membase + ATMEL_US_THR);
}
#else
static inline u8 atmel_uart_read_char(struct uart_port *port)
{
return __raw_readb(port->membase + ATMEL_US_RHR);
@ -254,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
__raw_writeb(value, port->membase + ATMEL_US_THR);
}
#endif
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{

2
include/uapi/linux/serial_core.h
View File

@ -83,7 +83,7 @@
/* Parisc type numbers. */
#define PORT_MUX 48
/* Atmel AT91 / AT32 SoC */
/* Atmel AT91 SoC */
#define PORT_ATMEL 49
/* Macintosh Zilog type numbers */