renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code

via-velocity: allow nesting of ethtool_ops begin() and complete()

Browse Source 
Unlike most networking drivers using begin() and complete() ethtool_ops
callbacks to resume a device which is down and suspend it again when done,
via-velocity does not use standard refcounted infrastructure but sets
device sleep state directly.

With the introduction of netlink ethtool interface, we may have nested
begin-complete blocks so that inner complete() would put the device back to
sleep for the rest of the outer block.

To avoid rewriting an old and not very actively developed driver, just add
a nesting counter and only perform resume and suspend on the outermost
level.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michal Kubecek 2020-01-06 07:39:36 +01:00 committed by David S. Miller
parent a69faa0910
commit 71f711a4f1
2 changed files with 11 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/net/ethernet/via/via-velocity.c
View File

@ -3257,12 +3257,16 @@ static struct platform_driver velocity_platform_driver = {
* @dev: network device
*
* Called before an ethtool operation. We need to make sure the
* chip is out of D3 state before we poke at it.
* chip is out of D3 state before we poke at it. In case of ethtool
* ops nesting, only wake the device up in the outermost block.
*/
static int velocity_ethtool_up(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
if (!netif_running(dev))
if (vptr->ethtool_ops_nesting == U32_MAX)
return -EBUSY;
if (!vptr->ethtool_ops_nesting++ && !netif_running(dev))
velocity_set_power_state(vptr, PCI_D0);
return 0;
}
@ -3272,12 +3276,14 @@ static int velocity_ethtool_up(struct net_device *dev)
* @dev: network device
*
* Called after an ethtool operation. Restore the chip back to D3
* state if it isn't running.
* state if it isn't running. In case of ethtool ops nesting, only
* put the device to sleep in the outermost block.
*/
static void velocity_ethtool_down(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
if (!netif_running(dev))
if (!--vptr->ethtool_ops_nesting && !netif_running(dev))
velocity_set_power_state(vptr, PCI_D3hot);
}

1
drivers/net/ethernet/via/via-velocity.h
View File

@ -1483,6 +1483,7 @@ struct velocity_info {
struct velocity_context context;
u32 ticks;
u32 ethtool_ops_nesting;
u8 rev_id;