From fc5a40a2301aa241eedb16caf9169ca5763707c1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:02 +0100 Subject: [PATCH 001/174] UAPI: (Scripted) Disintegrate include/linux/raid Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/raid/Kbuild | 2 - include/linux/raid/md_u.h | 141 +----------------------- include/uapi/linux/raid/Kbuild | 2 + include/{ => uapi}/linux/raid/md_p.h | 0 include/uapi/linux/raid/md_u.h | 155 +++++++++++++++++++++++++++ 5 files changed, 158 insertions(+), 142 deletions(-) rename include/{ => uapi}/linux/raid/md_p.h (100%) create mode 100644 include/uapi/linux/raid/md_u.h diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild index 2415a64c5e51..e69de29bb2d1 100644 --- a/include/linux/raid/Kbuild +++ b/include/linux/raid/Kbuild @@ -1,2 +0,0 @@ -header-y += md_p.h -header-y += md_u.h diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h index fb1abb3367e9..358c04bfbe2a 100644 --- a/include/linux/raid/md_u.h +++ b/include/linux/raid/md_u.h @@ -11,149 +11,10 @@ (for example /usr/src/linux/COPYING); if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef _MD_U_H #define _MD_U_H -/* - * Different major versions are not compatible. - * Different minor versions are only downward compatible. - * Different patchlevel versions are downward and upward compatible. - */ -#define MD_MAJOR_VERSION 0 -#define MD_MINOR_VERSION 90 -/* - * MD_PATCHLEVEL_VERSION indicates kernel functionality. - * >=1 means different superblock formats are selectable using SET_ARRAY_INFO - * and major_version/minor_version accordingly - * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT - * in the super status byte - * >=3 means that bitmap superblock version 4 is supported, which uses - * little-ending representation rather than host-endian - */ -#define MD_PATCHLEVEL_VERSION 3 +#include -/* ioctls */ - -/* status */ -#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) -#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) -#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) -#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) -#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) -#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) - -/* configuration */ -#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) -#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) -#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) -#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) -#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) -#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) -#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) -#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) -#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) -#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) -#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) -#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) - -/* usage */ -#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) -/* 0x31 was START_ARRAY */ -#define STOP_ARRAY _IO (MD_MAJOR, 0x32) -#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) -#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) - -/* 63 partitions with the alternate major number (mdp) */ -#define MdpMinorShift 6 -#ifdef __KERNEL__ extern int mdp_major; -#endif - -typedef struct mdu_version_s { - int major; - int minor; - int patchlevel; -} mdu_version_t; - -typedef struct mdu_array_info_s { - /* - * Generic constant information - */ - int major_version; - int minor_version; - int patch_version; - int ctime; - int level; - int size; - int nr_disks; - int raid_disks; - int md_minor; - int not_persistent; - - /* - * Generic state information - */ - int utime; /* 0 Superblock update time */ - int state; /* 1 State bits (clean, ...) */ - int active_disks; /* 2 Number of currently active disks */ - int working_disks; /* 3 Number of working disks */ - int failed_disks; /* 4 Number of failed disks */ - int spare_disks; /* 5 Number of spare disks */ - - /* - * Personality information - */ - int layout; /* 0 the array's physical layout */ - int chunk_size; /* 1 chunk size in bytes */ - -} mdu_array_info_t; - -/* non-obvious values for 'level' */ -#define LEVEL_MULTIPATH (-4) -#define LEVEL_LINEAR (-1) -#define LEVEL_FAULTY (-5) - -/* we need a value for 'no level specified' and 0 - * means 'raid0', so we need something else. This is - * for internal use only - */ -#define LEVEL_NONE (-1000000) - -typedef struct mdu_disk_info_s { - /* - * configuration/status of one particular disk - */ - int number; - int major; - int minor; - int raid_disk; - int state; - -} mdu_disk_info_t; - -typedef struct mdu_start_info_s { - /* - * configuration/status of one particular disk - */ - int major; - int minor; - int raid_disk; - int state; - -} mdu_start_info_t; - -typedef struct mdu_bitmap_file_s -{ - char pathname[4096]; -} mdu_bitmap_file_t; - -typedef struct mdu_param_s -{ - int personality; /* 1,2,3,4 */ - int chunk_size; /* in bytes */ - int max_fault; /* unused for now */ -} mdu_param_t; - #endif - diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild index aafaa5aa54d4..e2c3d25405d7 100644 --- a/include/uapi/linux/raid/Kbuild +++ b/include/uapi/linux/raid/Kbuild @@ -1 +1,3 @@ # UAPI Header export list +header-y += md_p.h +header-y += md_u.h diff --git a/include/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h similarity index 100% rename from include/linux/raid/md_p.h rename to include/uapi/linux/raid/md_p.h diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h new file mode 100644 index 000000000000..4133e744e4e6 --- /dev/null +++ b/include/uapi/linux/raid/md_u.h @@ -0,0 +1,155 @@ +/* + md_u.h : user <=> kernel API between Linux raidtools and RAID drivers + Copyright (C) 1998 Ingo Molnar + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + You should have received a copy of the GNU General Public License + (for example /usr/src/linux/COPYING); if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _UAPI_MD_U_H +#define _UAPI_MD_U_H + +/* + * Different major versions are not compatible. + * Different minor versions are only downward compatible. + * Different patchlevel versions are downward and upward compatible. + */ +#define MD_MAJOR_VERSION 0 +#define MD_MINOR_VERSION 90 +/* + * MD_PATCHLEVEL_VERSION indicates kernel functionality. + * >=1 means different superblock formats are selectable using SET_ARRAY_INFO + * and major_version/minor_version accordingly + * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT + * in the super status byte + * >=3 means that bitmap superblock version 4 is supported, which uses + * little-ending representation rather than host-endian + */ +#define MD_PATCHLEVEL_VERSION 3 + +/* ioctls */ + +/* status */ +#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) +#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) +#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) +#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) +#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) +#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) + +/* configuration */ +#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) +#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) +#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) +#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) +#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) +#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) +#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) +#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) +#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) +#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) +#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) +#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) + +/* usage */ +#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) +/* 0x31 was START_ARRAY */ +#define STOP_ARRAY _IO (MD_MAJOR, 0x32) +#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) +#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) + +/* 63 partitions with the alternate major number (mdp) */ +#define MdpMinorShift 6 + +typedef struct mdu_version_s { + int major; + int minor; + int patchlevel; +} mdu_version_t; + +typedef struct mdu_array_info_s { + /* + * Generic constant information + */ + int major_version; + int minor_version; + int patch_version; + int ctime; + int level; + int size; + int nr_disks; + int raid_disks; + int md_minor; + int not_persistent; + + /* + * Generic state information + */ + int utime; /* 0 Superblock update time */ + int state; /* 1 State bits (clean, ...) */ + int active_disks; /* 2 Number of currently active disks */ + int working_disks; /* 3 Number of working disks */ + int failed_disks; /* 4 Number of failed disks */ + int spare_disks; /* 5 Number of spare disks */ + + /* + * Personality information + */ + int layout; /* 0 the array's physical layout */ + int chunk_size; /* 1 chunk size in bytes */ + +} mdu_array_info_t; + +/* non-obvious values for 'level' */ +#define LEVEL_MULTIPATH (-4) +#define LEVEL_LINEAR (-1) +#define LEVEL_FAULTY (-5) + +/* we need a value for 'no level specified' and 0 + * means 'raid0', so we need something else. This is + * for internal use only + */ +#define LEVEL_NONE (-1000000) + +typedef struct mdu_disk_info_s { + /* + * configuration/status of one particular disk + */ + int number; + int major; + int minor; + int raid_disk; + int state; + +} mdu_disk_info_t; + +typedef struct mdu_start_info_s { + /* + * configuration/status of one particular disk + */ + int major; + int minor; + int raid_disk; + int state; + +} mdu_start_info_t; + +typedef struct mdu_bitmap_file_s +{ + char pathname[4096]; +} mdu_bitmap_file_t; + +typedef struct mdu_param_s +{ + int personality; /* 1,2,3,4 */ + int chunk_size; /* in bytes */ + int max_fault; /* unused for now */ +} mdu_param_t; + +#endif /* _UAPI_MD_U_H */ From 588377d6199034c36d335e7df5818b731fea072c Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 8 Oct 2012 20:37:30 -0700 Subject: [PATCH 002/174] rbd: reset BACKOFF if unable to re-queue If ceph_fault() is unable to queue work after a delay, it sets the BACKOFF connection flag so con_work() will attempt to do so. In con_work(), when BACKOFF is set, if queue_delayed_work() doesn't result in newly-queued work, it simply ignores this condition and proceeds as if no backoff delay were desired. There are two problems with this--one of which is a bug. The first problem is simply that the intended behavior is to back off, and if we aren't able queue the work item to run after a delay we're not doing that. The only reason queue_delayed_work() won't queue work is if the provided work item is already queued. In the messenger, this means that con_work() is already scheduled to be run again. So if we simply set the BACKOFF flag again when this occurs, we know the next con_work() call will again attempt to hold off activity on the connection until after the delay. The second problem--the bug--is a leak of a reference count. If queue_delayed_work() returns 0 in con_work(), con->ops->put() drops the connection reference held on entry to con_work(). However, processing is (was) allowed to continue, and at the end of the function a second con->ops->put() is called. This patch fixes both problems. Signed-off-by: Alex Elder Reviewed-by: Sage Weil --- net/ceph/messenger.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 159aa8bef9e7..cad0d17ec45e 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -2300,10 +2300,11 @@ restart: mutex_unlock(&con->mutex); return; } else { - con->ops->put(con); dout("con_work %p FAILED to back off %lu\n", con, con->delay); + set_bit(CON_FLAG_BACKOFF, &con->flags); } + goto done; } if (con->state == CON_STATE_STANDBY) { From d79550a7bc35c16476ebdc27c78378d8093390ec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 11 Oct 2012 09:56:35 +0300 Subject: [PATCH 003/174] gpio-timberdale: fix a potential wrapping issue ->last_ier is an unsigned long but the high bits can't be used int the original code because the shift wraps. Cc: stable@kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Linus Walleij --- drivers/gpio/gpio-timberdale.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c index 031c6adf5b65..1a3e2b9b4772 100644 --- a/drivers/gpio/gpio-timberdale.c +++ b/drivers/gpio/gpio-timberdale.c @@ -116,7 +116,7 @@ static void timbgpio_irq_disable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier &= ~(1 << offset); + tgpio->last_ier &= ~(1UL << offset); iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } @@ -128,7 +128,7 @@ static void timbgpio_irq_enable(struct irq_data *d) unsigned long flags; spin_lock_irqsave(&tgpio->lock, flags); - tgpio->last_ier |= 1 << offset; + tgpio->last_ier |= 1UL << offset; iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER); spin_unlock_irqrestore(&tgpio->lock, flags); } From a48221a26e4914b7e2d8a1749b6115212bac8bee Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 16 Oct 2012 15:24:01 +0200 Subject: [PATCH 004/174] gpio-74x164: Fix buffer allocation size The new registers handling in the gpio-74x164 driver allocates chip->registers * 8 bytes where only one byte per register is necessary. This patch fixes this. Signed-off-by: Roland Stigge Signed-off-by: Linus Walleij --- drivers/gpio/gpio-74x164.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index ed3e55161bdc..f05e54258ffb 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -153,7 +153,7 @@ static int __devinit gen_74x164_probe(struct spi_device *spi) } chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; - chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL); + chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL); if (!chip->buffer) { ret = -ENOMEM; goto exit_destroy; From c4a9fafc77a5318f5ed26c509bbcddf03e18c201 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:56:19 +0200 Subject: [PATCH 005/174] cfg80211: fix antenna gain handling No driver initializes chan->max_antenna_gain to something sensible, and the only place where it is being used right now is inside ath9k. This leads to ath9k potentially using less tx power than it can use, which can decrease performance/range in some rare cases. Rather than going through every single driver, this patch initializes chan->orig_mag in wiphy_register(), ignoring whatever value the driver left in there. If a driver for some reason wishes to limit it independent from regulatory rulesets, it can do so internally. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/wireless/core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 443d4d7deea2..3f7253052088 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -526,8 +526,7 @@ int wiphy_register(struct wiphy *wiphy) for (i = 0; i < sband->n_channels; i++) { sband->channels[i].orig_flags = sband->channels[i].flags; - sband->channels[i].orig_mag = - sband->channels[i].max_antenna_gain; + sband->channels[i].orig_mag = INT_MAX; sband->channels[i].orig_mpwr = sband->channels[i].max_power; sband->channels[i].band = band; From 279f0f55249820d8129470c0e104084b252f26f3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 17 Oct 2012 13:56:20 +0200 Subject: [PATCH 006/174] cfg80211: fix initialization of chan->max_reg_power A few places touch chan->max_power based on updated tx power rules, but forget to do the same to chan->max_reg_power. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/reg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 3b8cbbc214db..bcc7d7ee5a51 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -908,7 +908,7 @@ static void handle_channel(struct wiphy *wiphy, map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = chan->orig_mag = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_power = chan->orig_mpwr = + chan->max_reg_power = chan->max_power = chan->orig_mpwr = (int) MBM_TO_DBM(power_rule->max_eirp); return; } @@ -1331,7 +1331,8 @@ static void handle_channel_custom(struct wiphy *wiphy, chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); - chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); + chan->max_reg_power = chan->max_power = + (int) MBM_TO_DBM(power_rule->max_eirp); } static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, From 0be1fecd7ee61b5a6d2b2e94b052b8a070b946ef Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 22 Oct 2012 10:44:55 +1100 Subject: [PATCH 007/174] md faulty: use disk_stack_limits() in: fe86cdce block: do not artificially constrain max_sectors for stacking drivers max_sectors defaults to UINT_MAX. md faulty wasn't using disk_stack_limits(), so inherited this large value as well. This triggered a bug in XFS when stressed over md_faulty, when a very large bio_alloc() failed. That was on an older kernel, and I can't reproduce exactly the same thing upstream, but I think the fix is appropriate in any case. Thanks to Mike Snitzer for pointing out the problem. Signed-off-by: Eric Sandeen Signed-off-by: NeilBrown --- drivers/md/faulty.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c index 45135f69509c..5e7dc772f5de 100644 --- a/drivers/md/faulty.c +++ b/drivers/md/faulty.c @@ -315,8 +315,11 @@ static int run(struct mddev *mddev) } conf->nfaults = 0; - rdev_for_each(rdev, mddev) + rdev_for_each(rdev, mddev) { conf->rdev = rdev; + disk_stack_limits(mddev->gendisk, rdev->bdev, + rdev->data_offset << 9); + } md_set_array_sectors(mddev, faulty_size(mddev, 0, 0)); mddev->private = conf; From bbb5823cf742a7e955f35c7d891e4e936944c33a Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Tue, 9 Oct 2012 13:00:47 +0000 Subject: [PATCH 008/174] netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d51) we should properly match the nexthop when destinations are directly connected because rt_gateway can be 0. The rt_gateway checks in H.323 helper try to avoid the creation of an unnecessary expectation in this call-forwarding case: http://people.netfilter.org/zhaojingmin/h323_conntrack_nat_helper/#_Toc133598073 However, the existing code fails to avoid that in many cases, see this thread: http://marc.info/?l=linux-netdev&m=135043175028620&w=2 It seems it is not trivial to know from the kernel if two hosts have to go through the firewall to communicate each other, which is the main point of the call-forwarding filter code to avoid creating unnecessary expectations. So this patch just gets things the way they were as before commit f8126f1d51. Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_h323_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 1b30b0dee708..962795e839ab 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -753,7 +753,8 @@ static int callforward_do_filter(const union nf_inet_addr *src, flowi4_to_flowi(&fl1), false)) { if (!afinfo->route(&init_net, (struct dst_entry **)&rt2, flowi4_to_flowi(&fl2), false)) { - if (rt1->rt_gateway == rt2->rt_gateway && + if (rt_nexthop(rt1, fl1.daddr) == + rt_nexthop(rt2, fl2.daddr) && rt1->dst.dev == rt2->dst.dev) ret = 1; dst_release(&rt2->dst); From 65635cbc37e011e71b208257a25e7c1078cd039b Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Wed, 17 Oct 2012 17:45:36 +0900 Subject: [PATCH 009/174] blkcg: Fix use-after-free of q->root_blkg and q->root_rl.blkg blk_put_rl() does not call blkg_put() for q->root_rl because we don't take request list reference on q->root_blkg. However, if root_blkg is once attached then detached (freed), blk_put_rl() is confused by the bogus pointer in q->root_blkg. For example, with !CONFIG_BLK_DEV_THROTTLING && CONFIG_CFQ_GROUP_IOSCHED, switching IO scheduler from cfq to deadline will cause system stall after the following warning with 3.6: > WARNING: at /work/build/linux/block/blk-cgroup.h:250 > blk_put_rl+0x4d/0x95() > Modules linked in: bridge stp llc sunrpc acpi_cpufreq freq_table mperf > ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 > Pid: 0, comm: swapper/0 Not tainted 3.6.0 #1 > Call Trace: > [] warn_slowpath_common+0x85/0x9d > [] warn_slowpath_null+0x1a/0x1c > [] blk_put_rl+0x4d/0x95 > [] __blk_put_request+0xc3/0xcb > [] blk_finish_request+0x232/0x23f > [] ? blk_end_bidi_request+0x34/0x5d > [] blk_end_bidi_request+0x42/0x5d > [] blk_end_request+0x10/0x12 > [] scsi_io_completion+0x207/0x4d5 > [] scsi_finish_command+0xfa/0x103 > [] scsi_softirq_done+0xff/0x108 > [] blk_done_softirq+0x8d/0xa1 > [] ? > generic_smp_call_function_single_interrupt+0x9f/0xd7 > [] __do_softirq+0x102/0x213 > [] ? lock_release_holdtime+0xb6/0xbb > [] ? raise_softirq_irqoff+0x9/0x3d > [] call_softirq+0x1c/0x30 > [] do_softirq+0x4b/0xa3 > [] irq_exit+0x53/0xd5 > [] smp_call_function_single_interrupt+0x34/0x36 > [] call_function_single_interrupt+0x6f/0x80 > [] ? mwait_idle+0x94/0xcd > [] ? mwait_idle+0x8b/0xcd > [] cpu_idle+0xbb/0x114 > [] rest_init+0xc1/0xc8 > [] ? csum_partial_copy_generic+0x16c/0x16c > [] start_kernel+0x3d4/0x3e1 > [] ? kernel_init+0x1f7/0x1f7 > [] x86_64_start_reservations+0xb8/0xbd > [] x86_64_start_kernel+0x101/0x110 This patch clears q->root_blkg and q->root_rl.blkg when root blkg is destroyed. Signed-off-by: Jun'ichi Nomura Acked-by: Vivek Goyal Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index cafcd7431189..3ad5e3fbf579 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -285,6 +285,13 @@ static void blkg_destroy_all(struct request_queue *q) blkg_destroy(blkg); spin_unlock(&blkcg->lock); } + + /* + * root blkg is destroyed. Just clear the pointer since + * root_rl does not take reference on root blkg. + */ + q->root_blkg = NULL; + q->root_rl.blkg = NULL; } static void blkg_rcu_free(struct rcu_head *rcu_head) From 65c77fd9e8a1c8c3da0bbbea6b7efa3d6ef265f8 Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Mon, 22 Oct 2012 10:15:37 +0900 Subject: [PATCH 010/174] blkcg: stop iteration early if root_rl is the only request list __blk_queue_next_rl() finds next request list based on blkg_list while skipping root_blkg in the list. OTOH, root_rl is special as it may exist even without root_blkg. Though the later part of the function handles such a case correctly, exiting early is good for readability of the code. Signed-off-by: Jun'ichi Nomura Cc: Tejun Heo Acked-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 3ad5e3fbf579..d0b770391ad4 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -333,6 +333,9 @@ struct request_list *__blk_queue_next_rl(struct request_list *rl, */ if (rl == &q->root_rl) { ent = &q->blkg_list; + /* There are no more block groups, hence no request lists */ + if (list_empty(ent)) + return NULL; } else { blkg = container_of(rl, struct blkcg_gq, rl); ent = &blkg->q_node; From 386bc35a2d548c28a5083b2e162a20251b37cab5 Mon Sep 17 00:00:00 2001 From: Anna Leuschner Date: Mon, 22 Oct 2012 21:53:36 +0200 Subject: [PATCH 011/174] vfs: fix: don't increase bio_slab_max if krealloc() fails Without the patch, bio_slab_max, representing bio_slabs capacity, is increased before krealloc() of bio_slabs. If krealloc() fails, bio_slab_max is too high. Fix that by only updating bio_slab_max if krealloc() is successful. Signed-off-by: Anna Leuschner Signed-off-by: Jens Axboe --- fs/bio.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 9298c65ad9c7..b96fc6ce4855 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -75,6 +75,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) unsigned int sz = sizeof(struct bio) + extra_size; struct kmem_cache *slab = NULL; struct bio_slab *bslab, *new_bio_slabs; + unsigned int new_bio_slab_max; unsigned int i, entry = -1; mutex_lock(&bio_slab_lock); @@ -97,12 +98,13 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) goto out_unlock; if (bio_slab_nr == bio_slab_max && entry == -1) { - bio_slab_max <<= 1; + new_bio_slab_max = bio_slab_max << 1; new_bio_slabs = krealloc(bio_slabs, - bio_slab_max * sizeof(struct bio_slab), + new_bio_slab_max * sizeof(struct bio_slab), GFP_KERNEL); if (!new_bio_slabs) goto out_unlock; + bio_slab_max = new_bio_slab_max; bio_slabs = new_bio_slabs; } if (entry == -1) From a9193983f4f292a82a00c72971c17ec0ee8c6c15 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 22 Oct 2012 12:55:55 +0200 Subject: [PATCH 012/174] drm/i915: fix overlay on i830M MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827 Cc: stable@vger.kernel.org Tested-by: Rhys Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_overlay.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index 495625914e4a..d7bc817f51a0 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -341,9 +341,17 @@ static int intel_overlay_off(struct intel_overlay *overlay) intel_ring_emit(ring, flip_addr); intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); /* turn overlay off */ - intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); - intel_ring_emit(ring, flip_addr); - intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + if (IS_I830(dev)) { + /* Workaround: Don't disable the overlay fully, since otherwise + * it dies on the next OVERLAY_ON cmd. */ + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + intel_ring_emit(ring, MI_NOOP); + } else { + intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF); + intel_ring_emit(ring, flip_addr); + intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); + } intel_ring_advance(ring); return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); From 7f6658ef35a470cd641ea35a1da409c4bc5bae1e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 23:26:29 +0200 Subject: [PATCH 013/174] drm/i915: VGA needs to be on pipe A on i830M The bit doesn't stick, and the output is always cloned from pipe A, even when it's supposed to scan out from pipe B. Shuts up annoying warnings from the modeset-rework, too. I've noticed that with this patch we know get and unknown connection state since the code can't find a suitable pipe for load detection. But that beats the previous state of affairs, where it tried to use pipe B, actually used pipe A and concluded that something is connected (although it's the LVDS on pipe A and nothing on the VGA connector on pipe B). I've tried to make load detect work by remapping the pipe->planes stuff, so that crtc 0 will use pipe B and hence we still have something left for load-detect on pipe A. But alas, that upset the hw a bit. So there's still some things to figure out, but this here will at least paper over some of the problems. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Acked-by: Chris Wilson [danvet: extend the commit message a bit with recent observations.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index f78061af7045..b726b478a4f5 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -729,7 +729,7 @@ void intel_crt_init(struct drm_device *dev) crt->base.type = INTEL_OUTPUT_ANALOG; crt->base.cloneable = true; - if (IS_HASWELL(dev)) + if (IS_HASWELL(dev) || IS_I830(dev)) crt->base.crtc_mask = (1 << 0); else crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); From 8e42e0a23d30ba84d8e946042ee82aac4934048a Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 13:01:46 -0700 Subject: [PATCH 014/174] block: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Jens Axboe Signed-off-by: Kees Cook Signed-off-by: Jens Axboe --- block/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/Kconfig b/block/Kconfig index 09acf1b39905..a7e40a7c8214 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -89,7 +89,7 @@ config BLK_DEV_INTEGRITY config BLK_DEV_THROTTLING bool "Block layer bio throttling support" - depends on BLK_CGROUP=y && EXPERIMENTAL + depends on BLK_CGROUP=y default n ---help--- Block layer bio throttling support. It can be used to limit From b8977285ecb0033b0bd9a99d4355f9c0bc8708f1 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 23 Oct 2012 14:01:51 -0600 Subject: [PATCH 015/174] drivers/block: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Greg Kroah-Hartman CC: Asai Thambi S P CC: Pete Zaitcev CC: Cong Wang CC: Jens Axboe Signed-off-by: Kees Cook Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index f529407db93f..6983a65c8df3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -166,8 +166,8 @@ config BLK_DEV_DAC960 module will be called DAC960. config BLK_DEV_UMEM - tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + tristate "Micro Memory MM5415 Battery Backed RAM support" + depends on PCI ---help--- Saying Y here will include support for the MM5415 family of battery backed (Non-volatile) RAM cards. @@ -430,8 +430,8 @@ config CDROM_PKTCDVD_BUFFERS a disc is opened for writing. config CDROM_PKTCDVD_WCACHE - bool "Enable write caching (EXPERIMENTAL)" - depends on CDROM_PKTCDVD && EXPERIMENTAL + bool "Enable write caching" + depends on CDROM_PKTCDVD help If enabled, write caching will be set for the CD-R/W device. For now this option is dangerous unless the CD-RW media is known good, as we @@ -508,8 +508,8 @@ config XEN_BLKDEV_BACKEND config VIRTIO_BLK - tristate "Virtio block driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && VIRTIO + tristate "Virtio block driver" + depends on VIRTIO ---help--- This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. @@ -528,7 +528,7 @@ config BLK_DEV_HD config BLK_DEV_RBD tristate "Rados block device (RBD)" - depends on INET && EXPERIMENTAL && BLOCK + depends on INET && BLOCK select CEPH_LIB select LIBCRC32C select CRYPTO_AES From c57d75c099e55500b620f50a207e61b9e20ecd29 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 23 Oct 2012 10:17:05 +0200 Subject: [PATCH 016/174] gpio: mvebu: correctly set the value in direction_output() The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 902af437eaf2..1bb43e3f9a61 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -244,6 +244,8 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, if (ret) return ret; + mvebu_gpio_set(chip, pin, value); + spin_lock_irqsave(&mvchip->lock, flags); u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)); u &= ~(1 << pin); From b6e0e543f75729f207b9c72b0162ae61170635b2 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 21 Oct 2012 12:52:39 +0200 Subject: [PATCH 017/174] drm/i915: clear the entire sdvo infoframe buffer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like in the case of native hdmi, which is fixed already in commit adf00b26d18e1b3570451296e03bcb20e4798cdd Author: Paulo Zanoni Date: Tue Sep 25 13:23:34 2012 -0300 drm/i915: make sure we write all the DIP data bytes we need to clear the entire sdvo buffer to avoid upsetting the display. Since infoframe buffer writing is now a bit more elaborate, extract it into it's own function. This will be useful if we ever get around to properly update the ELD for sdvo. Also #define proper names for the two buffer indexes with fixed usage. v2: Cite the right commit above, spotted by Paulo Zanoni. v3: I'm too stupid to paste the right commit. v4: Ben Hutchings noticed that I've failed to handle an underflow in my loop logic, breaking it for i >= length + 8. Since I've just lost C programmer license, use his solution. Also, make the frustrated 0-base buffer size a notch more clear. Reported-and-tested-by: Jürg Billeter Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732 Cc: stable@vger.kernel.org Cc: Paulo Zanoni Cc: Ben Hutchings Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 62 +++++++++++++++++--------- drivers/gpu/drm/i915/intel_sdvo_regs.h | 2 + 2 files changed, 44 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index c01d97db0061..79d308da29ff 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -894,6 +894,45 @@ static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo) } #endif +static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo, + unsigned if_index, uint8_t tx_rate, + uint8_t *data, unsigned length) +{ + uint8_t set_buf_index[2] = { if_index, 0 }; + uint8_t hbuf_size, tmp[8]; + int i; + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2)) + return false; + + if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO, + &hbuf_size, 1)) + return false; + + /* Buffer size is 0 based, hooray! */ + hbuf_size++; + + DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n", + if_index, length, hbuf_size); + + for (i = 0; i < hbuf_size; i += 8) { + memset(tmp, 0, 8); + if (i < length) + memcpy(tmp, data + i, min_t(unsigned, 8, length - i)); + + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_DATA, + tmp, 8)) + return false; + } + + return intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_TXRATE, + &tx_rate, 1); +} + static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) { struct dip_infoframe avi_if = { @@ -901,11 +940,7 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) .ver = DIP_VERSION_AVI, .len = DIP_LEN_AVI, }; - uint8_t tx_rate = SDVO_HBUF_TX_VSYNC; - uint8_t set_buf_index[2] = { 1, 0 }; uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)]; - uint64_t *data = (uint64_t *)sdvo_data; - unsigned i; intel_dip_infoframe_csum(&avi_if); @@ -915,22 +950,9 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) sdvo_data[3] = avi_if.checksum; memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi)); - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_INDEX, - set_buf_index, 2)) - return false; - - for (i = 0; i < sizeof(sdvo_data); i += 8) { - if (!intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_DATA, - data, 8)) - return false; - data++; - } - - return intel_sdvo_set_value(intel_sdvo, - SDVO_CMD_SET_HBUF_TXRATE, - &tx_rate, 1); + return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF, + SDVO_HBUF_TX_VSYNC, + sdvo_data, sizeof(sdvo_data)); } static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo) diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 9d030142ee43..770bdd6ecd9f 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -708,6 +708,8 @@ struct intel_sdvo_enhancements_arg { #define SDVO_CMD_SET_AUDIO_STAT 0x91 #define SDVO_CMD_GET_AUDIO_STAT 0x92 #define SDVO_CMD_SET_HBUF_INDEX 0x93 + #define SDVO_HBUF_INDEX_ELD 0 + #define SDVO_HBUF_INDEX_AVI_IF 1 #define SDVO_CMD_GET_HBUF_INDEX 0x94 #define SDVO_CMD_GET_HBUF_INFO 0x95 #define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 From 9690fb169b433a66485c808e4fc352b8a0f8d866 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Oct 2012 14:19:53 +0200 Subject: [PATCH 018/174] mac80211: use blacklist for duplicate IE check Instead of the current whitelist which accepts duplicates only for the quiet and vendor IEs, use a blacklist of all IEs (that we currently parse) that can't be duplicated. This avoids detecting a beacon as corrupt in the future when new IEs are added that can be duplicated. Cc: stable@vger.kernel.org Signed-off-by: Paul Stewart Signed-off-by: Johannes Berg --- net/mac80211/util.c | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 22ca35054dd0..e6e4bda0528e 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -643,13 +643,41 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, break; } - if (id != WLAN_EID_VENDOR_SPECIFIC && - id != WLAN_EID_QUIET && - test_bit(id, seen_elems)) { - elems->parse_error = true; - left -= elen; - pos += elen; - continue; + switch (id) { + case WLAN_EID_SSID: + case WLAN_EID_SUPP_RATES: + case WLAN_EID_FH_PARAMS: + case WLAN_EID_DS_PARAMS: + case WLAN_EID_CF_PARAMS: + case WLAN_EID_TIM: + case WLAN_EID_IBSS_PARAMS: + case WLAN_EID_CHALLENGE: + case WLAN_EID_RSN: + case WLAN_EID_ERP_INFO: + case WLAN_EID_EXT_SUPP_RATES: + case WLAN_EID_HT_CAPABILITY: + case WLAN_EID_HT_OPERATION: + case WLAN_EID_VHT_CAPABILITY: + case WLAN_EID_VHT_OPERATION: + case WLAN_EID_MESH_ID: + case WLAN_EID_MESH_CONFIG: + case WLAN_EID_PEER_MGMT: + case WLAN_EID_PREQ: + case WLAN_EID_PREP: + case WLAN_EID_PERR: + case WLAN_EID_RANN: + case WLAN_EID_CHANNEL_SWITCH: + case WLAN_EID_EXT_CHANSWITCH_ANN: + case WLAN_EID_COUNTRY: + case WLAN_EID_PWR_CONSTRAINT: + case WLAN_EID_TIMEOUT_INTERVAL: + if (test_bit(id, seen_elems)) { + elems->parse_error = true; + left -= elen; + pos += elen; + continue; + } + break; } if (calc_crc && id < 64 && (filter & (1ULL << id))) From 9bd952615a42d7e2ce3fa2c632e808e804637a1a Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 24 Oct 2012 16:12:58 -0700 Subject: [PATCH 019/174] libceph: avoid NULL kref_put when osd reset races with alloc_msg The ceph_on_in_msg_alloc() method drops con->mutex while it allocates a message. If that races with a timeout that resends a zillion messages and resets the connection, and the ->alloc_msg() method returns a NULL message, it will call ceph_msg_put(NULL) and BUG. Fix by only calling put if msg is non-NULL. Fixes http://tracker.newdream.net/issues/3142 Signed-off-by: Sage Weil --- net/ceph/messenger.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index cad0d17ec45e..3ef1759403b4 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -2750,7 +2750,8 @@ static int ceph_con_in_msg_alloc(struct ceph_connection *con, int *skip) msg = con->ops->alloc_msg(con, hdr, skip); mutex_lock(&con->mutex); if (con->state != CON_STATE_OPEN) { - ceph_msg_put(msg); + if (msg) + ceph_msg_put(msg); return -EAGAIN; } con->in_msg = msg; From ae495e844a77344fdaedbb2ad97d925d096e9f0d Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Thu, 25 Oct 2012 00:38:01 -0700 Subject: [PATCH 020/174] Input: egalax_ts - get gpio from devicetree The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing Reviewed-by: Shawn Guo Signed-off-by: Hui Wang Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/egalax-ts.txt | 19 +++++++++++++++ drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/egalax_ts.c | 23 +++++++++++++++++-- 3 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt new file mode 100644 index 000000000000..df70318a617f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -0,0 +1,19 @@ +* EETI eGalax Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,egalax_ts" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- wakeup-gpios: the gpio pin to be used for waking up the controller + as well as uased as irq pin + +Example: + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1ba232cbc09d..f7668b24c378 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index c1e3460f1195..13fa62fdfb0b 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); + struct device_node *np = client->dev.of_node; + int gpio; int ret; + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "wakeup-gpios", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; + ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { dev_err(&client->dev, @@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + error = egalax_wake_up_device(client); + if (error) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) { @@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); +static struct of_device_id egalax_ts_dt_ids[] = { + { .compatible = "eeti,egalax_ts" }, + { /* sentinel */ } +}; + static struct i2c_driver egalax_ts_driver = { .driver = { .name = "egalax_ts", .owner = THIS_MODULE, .pm = &egalax_ts_pm_ops, + .of_match_table = of_match_ptr(egalax_ts_dt_ids), }, .id_table = egalax_ts_id, .probe = egalax_ts_probe, From 88fd449e734a4264347e12b8ff74ccb33a9b9a35 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Wed, 24 Oct 2012 23:53:02 -0700 Subject: [PATCH 021/174] Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c3468c8dbd89..c30d4c937952 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1449,6 +1449,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; From 555cb715be8ef98b8ec362b23dfc254d432a35b1 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Wed, 24 Oct 2012 12:43:30 -0700 Subject: [PATCH 022/174] mac80211: Only process mesh config header on frames that RA_MATCH Doing otherwise is wrong, and may wreak havoc on the mpp tables, specially if the frame is encrypted. Cc: stable@vger.kernel.org Reported-by: Chaoxing Lin Signed-off-by: Javier Cardona Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 61c621e9273f..1222127de9be 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1897,7 +1897,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata)) return RX_DROP_MONITOR; - if (!ieee80211_is_data(hdr->frame_control)) + if (!ieee80211_is_data(hdr->frame_control) || + !(status->rx_flags & IEEE80211_RX_RA_MATCH)) return RX_CONTINUE; if (!mesh_hdr->ttl) @@ -1941,9 +1942,6 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) } skb_set_queue_mapping(skb, q); - if (!(status->rx_flags & IEEE80211_RX_RA_MATCH)) - goto out; - if (!--mesh_hdr->ttl) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl); return RX_DROP_MONITOR; From 2ac64cd17f9af6d6adaa921bd9846a3c9bb9235c Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Wed, 24 Oct 2012 12:43:31 -0700 Subject: [PATCH 023/174] mac80211: Don't drop frames received with mesh ttl == 1 Prior this fix, those frames were not received, nor forwarded. Fix this to receive and not forward. Signed-off-by: Javier Cardona Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1222127de9be..f73e0dda0d86 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1944,7 +1944,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (!--mesh_hdr->ttl) { IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl); - return RX_DROP_MONITOR; + goto out; } if (!ifmsh->mshcfg.dot11MeshForwarding) From f7fbf70ee9db6da6033ae50d100e017ac1f26555 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 25 Oct 2012 11:10:18 -0700 Subject: [PATCH 024/174] mac80211: don't inspect Sequence Control field on control frames Per IEEE Std. 802.11-2012, Sec 8.2.4.4.1, the sequence Control field is not present in control frames. We noticed this problem when processing Block Ack Requests. Cc: stable@vger.kernel.org Signed-off-by: Javier Cardona Signed-off-by: Javier Lopez Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index f73e0dda0d86..c6865f2f47f8 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1462,6 +1462,10 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) hdr = (struct ieee80211_hdr *)rx->skb->data; fc = hdr->frame_control; + + if (ieee80211_is_ctl(fc)) + return RX_CONTINUE; + sc = le16_to_cpu(hdr->seq_ctrl); frag = sc & IEEE80211_SCTL_FRAG; From 975927b942c932bd839ed07e5d40b4037d816844 Mon Sep 17 00:00:00 2001 From: Jianpeng Ma Date: Thu, 25 Oct 2012 21:58:17 +0200 Subject: [PATCH 025/174] block: Add blk_rq_pos(rq) to sort rq when plushing My workload is a raid5 which had 16 disks. And used our filesystem to write using direct-io mode. I used the blktrace to find those message: 8,16 0 6647 2.453665504 2579 M W 7493152 + 8 [md0_raid5] 8,16 0 6648 2.453672411 2579 Q W 7493160 + 8 [md0_raid5] 8,16 0 6649 2.453672606 2579 M W 7493160 + 8 [md0_raid5] 8,16 0 6650 2.453679255 2579 Q W 7493168 + 8 [md0_raid5] 8,16 0 6651 2.453679441 2579 M W 7493168 + 8 [md0_raid5] 8,16 0 6652 2.453685948 2579 Q W 7493176 + 8 [md0_raid5] 8,16 0 6653 2.453686149 2579 M W 7493176 + 8 [md0_raid5] 8,16 0 6654 2.453693074 2579 Q W 7493184 + 8 [md0_raid5] 8,16 0 6655 2.453693254 2579 M W 7493184 + 8 [md0_raid5] 8,16 0 6656 2.453704290 2579 Q W 7493192 + 8 [md0_raid5] 8,16 0 6657 2.453704482 2579 M W 7493192 + 8 [md0_raid5] 8,16 0 6658 2.453715016 2579 Q W 7493200 + 8 [md0_raid5] 8,16 0 6659 2.453715247 2579 M W 7493200 + 8 [md0_raid5] 8,16 0 6660 2.453721730 2579 Q W 7493208 + 8 [md0_raid5] 8,16 0 6661 2.453721974 2579 M W 7493208 + 8 [md0_raid5] 8,16 0 6662 2.453728202 2579 Q W 7493216 + 8 [md0_raid5] 8,16 0 6663 2.453728436 2579 M W 7493216 + 8 [md0_raid5] 8,16 0 6664 2.453734782 2579 Q W 7493224 + 8 [md0_raid5] 8,16 0 6665 2.453735019 2579 M W 7493224 + 8 [md0_raid5] 8,16 0 6666 2.453741401 2579 Q W 7493232 + 8 [md0_raid5] 8,16 0 6667 2.453741632 2579 M W 7493232 + 8 [md0_raid5] 8,16 0 6668 2.453748148 2579 Q W 7493240 + 8 [md0_raid5] 8,16 0 6669 2.453748386 2579 M W 7493240 + 8 [md0_raid5] 8,16 0 6670 2.453851843 2579 I W 7493144 + 104 [md0_raid5] 8,16 0 0 2.453853661 0 m N cfq2579 insert_request 8,16 0 6671 2.453854064 2579 I W 7493120 + 24 [md0_raid5] 8,16 0 0 2.453854439 0 m N cfq2579 insert_request 8,16 0 6672 2.453854793 2579 U N [md0_raid5] 2 8,16 0 0 2.453855513 0 m N cfq2579 Not idling.st->count:1 8,16 0 0 2.453855927 0 m N cfq2579 dispatch_insert 8,16 0 0 2.453861771 0 m N cfq2579 dispatched a request 8,16 0 0 2.453862248 0 m N cfq2579 activate rq,drv=1 8,16 0 6673 2.453862332 2579 D W 7493120 + 24 [md0_raid5] 8,16 0 0 2.453865957 0 m N cfq2579 Not idling.st->count:1 8,16 0 0 2.453866269 0 m N cfq2579 dispatch_insert 8,16 0 0 2.453866707 0 m N cfq2579 dispatched a request 8,16 0 0 2.453867061 0 m N cfq2579 activate rq,drv=2 8,16 0 6674 2.453867145 2579 D W 7493144 + 104 [md0_raid5] 8,16 0 6675 2.454147608 0 C W 7493120 + 24 [0] 8,16 0 0 2.454149357 0 m N cfq2579 complete rqnoidle 0 8,16 0 6676 2.454791505 0 C W 7493144 + 104 [0] 8,16 0 0 2.454794803 0 m N cfq2579 complete rqnoidle 0 8,16 0 0 2.454795160 0 m N cfq schedule dispatch From above messages,we can find rq[W 7493144 + 104] and rq[W 7493120 + 24] do not merge. Because the bio order is: 8,16 0 6638 2.453619407 2579 Q W 7493144 + 8 [md0_raid5] 8,16 0 6639 2.453620460 2579 G W 7493144 + 8 [md0_raid5] 8,16 0 6640 2.453639311 2579 Q W 7493120 + 8 [md0_raid5] 8,16 0 6641 2.453639842 2579 G W 7493120 + 8 [md0_raid5] The bio(7493144) first and bio(7493120) later.So the subsequent bios will be divided into two parts. When flushing plug-list,because elv_attempt_insert_merge only support backmerge,not supporting frontmerge. So rq[7493120 + 24] can't merge with rq[7493144 + 104]. From my test,i found those situation can count 25% in our system. Using this patch, there is no this situation. Signed-off-by: Jianpeng Ma CC:Shaohua Li Signed-off-by: Jens Axboe --- block/blk-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index a33870b1847b..3c95c4d6e31a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2868,7 +2868,8 @@ static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b) struct request *rqa = container_of(a, struct request, queuelist); struct request *rqb = container_of(b, struct request, queuelist); - return !(rqa->q <= rqb->q); + return !(rqa->q < rqb->q || + (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb))); } /* From 2f72d4f6a29cf84c40fc05c76020b347b4774393 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 23 Oct 2012 20:17:05 -0700 Subject: [PATCH 026/174] xtensa: allow multi-inclusion for uapi/unistd.h Xtensa implements a method that allows to generate a arbitrary output for each system call by defining the __SYSCALL(number, function, num_args). This usually requires to include uapi/unistd.h twice. Instead of removing the guard agains multiple inclusion entirely, allow to include unistd.h again only if __SYSCALL is defined. Note that __SYSCALL gets always undefined at the end of the file. Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/unistd.h | 14 ++++---------- arch/xtensa/include/uapi/asm/unistd.h | 14 +++----------- arch/xtensa/kernel/syscall.c | 7 +++---- 3 files changed, 10 insertions(+), 25 deletions(-) diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 9ef1c31d2c83..d9fa52dbfba0 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -1,16 +1,8 @@ -/* - * include/asm-xtensa/unistd.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ +#ifndef _XTENSA_UNISTD_H +#define _XTENSA_UNISTD_H #include - /* * "Conditional" syscalls * @@ -37,3 +29,5 @@ #define __IGNORE_mmap /* use mmap2 */ #define __IGNORE_vfork /* use clone */ #define __IGNORE_fadvise64 /* use fadvise64_64 */ + +#endif /* _XTENSA_UNISTD_H */ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 479abaea5aae..1fd157f31211 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -1,14 +1,4 @@ -/* - * include/asm-xtensa/unistd.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2012 Tensilica Inc. - */ - -#ifndef _UAPI_XTENSA_UNISTD_H +#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL) #define _UAPI_XTENSA_UNISTD_H #ifndef __SYSCALL @@ -759,4 +749,6 @@ __SYSCALL(331, sys_kcmp, 5) #define SYS_XTENSA_COUNT 5 /* count */ +#undef __SYSCALL + #endif /* _UAPI_XTENSA_UNISTD_H */ diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index a5c01e74d5d5..5702065f472a 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -32,10 +32,8 @@ typedef void (*syscall_t)(void); syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { [0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall, -#undef __SYSCALL #define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol, -#undef __KERNEL_SYSCALLS__ -#include +#include }; asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) @@ -49,7 +47,8 @@ asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) return (long)ret; } -asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len) +asmlinkage long xtensa_fadvise64_64(int fd, int advice, + unsigned long long offset, unsigned long long len) { return sys_fadvise64_64(fd, offset, len, advice); } From cddfcbcd05851a3b720055d40fc61c63ea1c2bd1 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 23 Oct 2012 20:25:37 -0700 Subject: [PATCH 027/174] xtensa: use physical addresses for bus addresses Define virt_to_bus and bus_to_virt as virt_to_phys, and phys_to_virt, respectively. Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index e6be5b9091c2..700c2e6f2d25 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -62,6 +62,10 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size) static inline void iounmap(volatile void __iomem *addr) { } + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + #endif /* CONFIG_MMU */ /* From 6ebe7da25b7879194fdb5c43ea67b383dd9014d6 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Wed, 24 Oct 2012 13:15:21 -0700 Subject: [PATCH 028/174] xtensa: reset windowbase/windowstart when cloning the VM When we copy a user thread with CLONE_VM, we also have to reset windowbase and windowstart to start a pristine stack frame. Otherwise, overflows can happen using the address 0 as the stack pointer. Also add a special case for vfork, which continues on the parent stack until it calls execve. Because this could be a call8, we need to spill the stack pointer of the previus frame (if still 'live' in the register file). Signed-off-by: Chris Zankel --- arch/xtensa/kernel/process.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 1908f6642d31..341c151af919 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -220,8 +220,32 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, if (user_mode(regs)) { childregs->areg[1] = usp; + + /* When sharing memory with the parent thread, the child + usually starts on a pristine stack, so we have to reset + windowbase, windowstart and wmask. + (Note that such a new thread is required to always create + an initial call4 frame) + The exception is vfork, where the new thread continues to + run on the parent's stack until it calls execve. This could + be a call8 or call12, which requires a legal stack frame + of the previous caller for the overflow handlers to work. + (Note that it's always legal to overflow live registers). + In this case, ensure to spill at least the stack pointer + of that frame. */ + if (clone_flags & CLONE_VM) { - childregs->wmask = 1; /* can't share live windows */ + /* check that caller window is live and same stack */ + int len = childregs->wmask & ~0xf; + if (regs->areg[1] == usp && len != 0) { + int callinc = (regs->areg[0] >> 30) & 3; + int caller_ars = XCHAL_NUM_AREGS - callinc * 4; + put_user(regs->areg[caller_ars+1], + (unsigned __user*)(usp - 12)); + } + childregs->wmask = 1; + childregs->windowstart = 1; + childregs->windowbase = 0; } else { int len = childregs->wmask & ~0xf; memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], From 3306a72669a2af23b324540b08e68e82ac5b7dab Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:50 +0400 Subject: [PATCH 029/174] xtensa: switch to generic kernel_thread() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 1 + arch/xtensa/include/asm/processor.h | 4 +- arch/xtensa/kernel/entry.S | 41 +++++---------- arch/xtensa/kernel/process.c | 77 +++++++++++++++++------------ arch/xtensa/kernel/xtensa_ksyms.c | 1 - 5 files changed, 61 insertions(+), 63 deletions(-) diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index cdcb48adee4c..9525b70a13a1 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -13,6 +13,7 @@ config XTENSA select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP + select GENERIC_KERNEL_THREAD select ARCH_WANT_OPTIONAL_GPIOLIB help Xtensa processors are 32-bit RISC machines designed by Tensilica diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index 5c371d8d4528..2d630e7399ca 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -152,6 +152,7 @@ struct thread_struct { /* Clearing a0 terminates the backtrace. */ #define start_thread(regs, new_pc, new_sp) \ + memset(regs, 0, sizeof(*regs)); \ regs->pc = new_pc; \ regs->ps = USER_PS_VALUE; \ regs->areg[1] = new_sp; \ @@ -168,9 +169,6 @@ struct mm_struct; /* Free all resources held by a thread. */ #define release_thread(thread) do { } while(0) -/* Create a kernel thread without removing it from tasklists */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - /* Copy and release all segment info associated with a VM */ #define copy_segments(p, mm) do { } while(0) #define release_segments(mm) do { } while(0) diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 18453067c258..d4ec1381aebc 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1832,34 +1832,6 @@ ENTRY(system_call) retw -/* - * Create a kernel thread - * - * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) - * a2 a2 a3 a4 - */ - -ENTRY(kernel_thread) - entry a1, 16 - - mov a5, a2 # preserve fn over syscall - mov a7, a3 # preserve args over syscall - - movi a3, _CLONE_VM | _CLONE_UNTRACED - movi a2, __NR_clone - or a6, a4, a3 # arg0: flags - mov a3, a1 # arg1: sp - syscall - - beq a3, a1, 1f # branch if parent - mov a6, a7 # args - callx4 a5 # fn(args) - - movi a2, __NR_exit - syscall # return value of fn(args) still in a6 - -1: retw - /* * Do a system call from kernel instead of calling sys_execve, so we end up * with proper pt_regs. @@ -1958,3 +1930,16 @@ ENTRY(ret_from_fork) j common_exception_return +/* + * Kernel thread creation helper + * On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg + * left from _switch_to: a6 = prev + */ +ENTRY(ret_from_kernel_thread) + + call4 schedule_tail + mov a6, a3 + callx4 a2 + call4 do_exit + +ENDPROC(ret_from_kernel_thread) diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 341c151af919..be52fe437c1b 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -45,6 +45,7 @@ #include extern void ret_from_fork(void); +extern void ret_from_kernel_thread(void); struct task_struct *current_set[NR_CPUS] = {&init_task, }; @@ -158,18 +159,30 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) /* * Copy thread. * + * There are two modes in which this function is called: + * 1) Userspace thread creation, + * regs != NULL, usp_thread_fn is userspace stack pointer. + * It is expected to copy parent regs (in case CLONE_VM is not set + * in the clone_flags) and set up passed usp in the childregs. + * 2) Kernel thread creation, + * regs == NULL, usp_thread_fn is the function to run in the new thread + * and thread_fn_arg is its parameter. + * childregs are not used for the kernel threads. + * * The stack layout for the new thread looks like this: * - * +------------------------+ <- sp in childregs (= tos) + * +------------------------+ * | childregs | * +------------------------+ <- thread.sp = sp in dummy-frame * | dummy-frame | (saved in dummy-frame spill-area) * +------------------------+ * - * We create a dummy frame to return to ret_from_fork: - * a0 points to ret_from_fork (simulating a call4) + * We create a dummy frame to return to either ret_from_fork or + * ret_from_kernel_thread: + * a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4) * sp points to itself (thread.sp) - * a2, a3 are unused. + * a2, a3 are unused for userspace threads, + * a2 points to thread_fn, a3 holds thread_fn arg for kernel threads. * * Note: This is a pristine frame, so we don't need any spill region on top of * childregs. @@ -185,41 +198,37 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) * involved. Much simpler to just not copy those live frames across. */ -int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long unused, - struct task_struct * p, struct pt_regs * regs) +int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn, + unsigned long thread_fn_arg, + struct task_struct *p, struct pt_regs *unused) { - struct pt_regs *childregs; - unsigned long tos; - int user_mode = user_mode(regs); + struct pt_regs *childregs = task_pt_regs(p); #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) struct thread_info *ti; #endif - /* Set up new TSS. */ - tos = (unsigned long)task_stack_page(p) + THREAD_SIZE; - if (user_mode) - childregs = (struct pt_regs*)(tos - PT_USER_SIZE); - else - childregs = (struct pt_regs*)tos - 1; - - /* This does not copy all the regs. In a bout of brilliance or madness, - ARs beyond a0-a15 exist past the end of the struct. */ - *childregs = *regs; - /* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */ *((int*)childregs - 3) = (unsigned long)childregs; *((int*)childregs - 4) = 0; - childregs->areg[2] = 0; - p->set_child_tid = p->clear_child_tid = NULL; - p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1); p->thread.sp = (unsigned long)childregs; - if (user_mode(regs)) { + if (!(p->flags & PF_KTHREAD)) { + struct pt_regs *regs = current_pt_regs(); + unsigned long usp = usp_thread_fn ? + usp_thread_fn : regs->areg[1]; + p->thread.ra = MAKE_RA_FOR_CALL( + (unsigned long)ret_from_fork, 0x1); + + /* This does not copy all the regs. + * In a bout of brilliance or madness, + * ARs beyond a0-a15 exist past the end of the struct. + */ + *childregs = *regs; childregs->areg[1] = usp; + childregs->areg[2] = 0; /* When sharing memory with the parent thread, the child usually starts on a pristine stack, so we have to reset @@ -254,11 +263,19 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, // FIXME: we need to set THREADPTR in thread_info... if (clone_flags & CLONE_SETTLS) childregs->areg[2] = childregs->areg[6]; - } else { - /* In kernel space, we start a new thread with a new stack. */ - childregs->wmask = 1; - childregs->areg[1] = tos; + p->thread.ra = MAKE_RA_FOR_CALL( + (unsigned long)ret_from_kernel_thread, 1); + + /* pass parameters to ret_from_kernel_thread: + * a2 = thread_fn, a3 = thread_fn arg + */ + *((int *)childregs - 1) = thread_fn_arg; + *((int *)childregs - 2) = usp_thread_fn; + + /* Childregs are only used when we're going to userspace + * in which case start_thread will set them up. + */ } #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) @@ -354,8 +371,6 @@ long xtensa_clone(unsigned long clone_flags, unsigned long newsp, void __user *child_tid, long a5, struct pt_regs *regs) { - if (!newsp) - newsp = regs->areg[1]; return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); } diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index a8b9f1fd1e17..afe058b24e6e 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -43,7 +43,6 @@ EXPORT_SYMBOL(__strncpy_user); EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(empty_zero_page); /* From f0a1bf0859ffa059f9009d6a17e8d46241fb2161 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:51 +0400 Subject: [PATCH 030/174] xtensa: switch to generic kernel_execve() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 1 + arch/xtensa/kernel/entry.S | 18 +----------------- 2 files changed, 2 insertions(+), 17 deletions(-) diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 9525b70a13a1..0d1f36a22c98 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -14,6 +14,7 @@ config XTENSA select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE select ARCH_WANT_OPTIONAL_GPIOLIB help Xtensa processors are 32-bit RISC machines designed by Tensilica diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index d4ec1381aebc..90bfc1dbc13d 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1832,22 +1832,6 @@ ENTRY(system_call) retw -/* - * Do a system call from kernel instead of calling sys_execve, so we end up - * with proper pt_regs. - * - * int kernel_execve(const char *fname, char *const argv[], charg *const envp[]) - * a2 a2 a3 a4 - */ - -ENTRY(kernel_execve) - entry a1, 16 - mov a6, a2 # arg0 is in a6 - movi a2, __NR_execve - syscall - - retw - /* * Task switch. * @@ -1940,6 +1924,6 @@ ENTRY(ret_from_kernel_thread) call4 schedule_tail mov a6, a3 callx4 a2 - call4 do_exit + j common_exception_return ENDPROC(ret_from_kernel_thread) From dc241f2c1761bfdec85915f4bbf7e750663f3442 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 25 Oct 2012 11:10:52 +0400 Subject: [PATCH 031/174] xtensa: switch to generic sys_execve() Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/syscall.h | 2 +- arch/xtensa/include/asm/unistd.h | 1 + arch/xtensa/include/uapi/asm/unistd.h | 2 +- arch/xtensa/kernel/process.c | 25 ------------------------- 4 files changed, 3 insertions(+), 27 deletions(-) diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index c1dacca312f3..124aeee0d381 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -10,7 +10,7 @@ struct pt_regs; struct sigaction; -asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); +asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*); asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); asmlinkage long xtensa_ptrace(long, long, long, long); asmlinkage long xtensa_sigreturn(struct pt_regs*); diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index d9fa52dbfba0..f4e6eaa40d1c 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -1,6 +1,7 @@ #ifndef _XTENSA_UNISTD_H #define _XTENSA_UNISTD_H +#define __ARCH_WANT_SYS_EXECVE #include /* diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 1fd157f31211..9f36d0e3e0ac 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -262,7 +262,7 @@ __SYSCALL(115, sys_sendmmsg, 4) #define __NR_clone 116 __SYSCALL(116, xtensa_clone, 5) #define __NR_execve 117 -__SYSCALL(117, xtensa_execve, 3) +__SYSCALL(117, sys_execve, 3) #define __NR_exit 118 __SYSCALL(118, sys_exit, 1) #define __NR_exit_group 119 diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index be52fe437c1b..09ae7bfab9a7 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -373,28 +373,3 @@ long xtensa_clone(unsigned long clone_flags, unsigned long newsp, { return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); } - -/* - * xtensa_execve() executes a new program. - */ - -asmlinkage -long xtensa_execve(const char __user *name, - const char __user *const __user *argv, - const char __user *const __user *envp, - long a3, long a4, long a5, - struct pt_regs *regs) -{ - long error; - struct filename *filename; - - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename->name, argv, envp, regs); - putname(filename); -out: - return error; -} - From ad2fab36d7922401c4576fb7ea9b21a47a29a17f Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 25 Oct 2012 14:03:03 +0300 Subject: [PATCH 032/174] gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios gpios requested with invalid numbers, or gpios requested from userspace via sysfs should not try to be deferred on failure. Cc: stable@kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5d6c71edc739..1c8d9e3380e1 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -623,9 +623,11 @@ static ssize_t export_store(struct class *class, */ status = gpio_request(gpio, "sysfs"); - if (status < 0) + if (status < 0) { + if (status == -EPROBE_DEFER) + status = -ENODEV; goto done; - + } status = gpio_export(gpio, true); if (status < 0) gpio_free(gpio); @@ -1191,8 +1193,10 @@ int gpio_request(unsigned gpio, const char *label) spin_lock_irqsave(&gpio_lock, flags); - if (!gpio_is_valid(gpio)) + if (!gpio_is_valid(gpio)) { + status = -EINVAL; goto done; + } desc = &gpio_desc[gpio]; chip = desc->chip; if (chip == NULL) From 5afc13af36d2fdaa48bc54386c6ad43590d88be5 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Fri, 26 Oct 2012 12:51:53 -0200 Subject: [PATCH 033/174] ALSA: hda - Fix mute-LED setup for HP dv5 laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The BIOS on HP dv5 doesn't have the DMI string to guide the setup of mute led GPIO and polarity. Associate this laptop with the hp-inv-led model. Signed-off-by: Gustavo Maciel Dias Vieira Tested-by: Vinícius Angiolucci Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 770013ff556f..9ba8af056170 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1763,6 +1763,8 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "HP", STAC_HP_ZEPHYR), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3660, "HP Mini", STAC_92HD83XXX_HP_LED), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x144E, + "HP Pavilion dv5", STAC_92HD83XXX_HP_INV_LED), {} /* terminator */ }; From e86b618547bb0c7db96aa70491112f032b3bec1c Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 25 Oct 2012 10:57:38 +0300 Subject: [PATCH 034/174] drm/i915: be less verbose about inability to provide vendor backlight commit 28dcc2d60cb570d9f549c329b2f51400553412a1 Author: Jani Nikula Date: Mon Sep 3 16:25:12 2012 +0300 drm/i915: do not expose a dysfunctional backlight interface to userspace prevents backlight interface creation if the BIOS has not set the backlight PWM CTL registers that contain the max PWM value. It's apparently normal on those machines, so demote the message about it to debug level. Reported-by: Orion Poplawski Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56330 Signed-off-by: Jani Nikula Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index e019b2369861..e2aacd329545 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -435,7 +435,7 @@ int intel_panel_setup_backlight(struct drm_device *dev) props.type = BACKLIGHT_RAW; props.max_brightness = _intel_panel_get_max_backlight(dev); if (props.max_brightness == 0) { - DRM_ERROR("Failed to get maximum backlight value\n"); + DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n"); return -ENODEV; } dev_priv->backlight = From 1623392af9da983f3ad088a75076c9da05e5600d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Oct 2012 12:06:41 +0100 Subject: [PATCH 035/174] drm/i915: Only kick out vesafb if we takeover the fbcon with KMS Otherwise we may remove the only console for a nomodeset system. We became more aggressive in our kicking with commit e188719a2891f01b3100dca4ae3a055fb5a7ab52 Author: Daniel Vetter Date: Tue Jun 12 11:28:17 2012 +0200 drm/i915: kick any firmware framebuffers before claiming the gtt Reported-and-tested-by: monnier@iro.umontreal.ca Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54615 Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org # v3.6 Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c9bfd83dde64..61ae104dca8c 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1505,7 +1505,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto put_gmch; } - i915_kick_out_firmware_fb(dev_priv); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + i915_kick_out_firmware_fb(dev_priv); pci_set_master(dev->pdev); From 29c08cdabd323adf7fcc0d26077383d4daf7b09a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 9 Oct 2012 12:12:14 -0700 Subject: [PATCH 036/174] qla2xxx: Add missing ->vport_slock while calling qlt_update_vp_map All other callers of qlt_update_vp_map() already hold ->vport_slock while updating the vp target map, so go ahead and add the missing ->vport_slock within qla24xx_disable_vp() code. Cc: Saurav Kashyap Cc: Chad Dupuis Cc: Arun Easi Cc: Andrew Vasquez Cc: Jiri Kosina Cc: Roland Dreier Acked-by: Saurav Kashyap Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_mid.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index bd4708a422cd..20fd974f903a 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -149,6 +149,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha) int qla24xx_disable_vp(scsi_qla_host_t *vha) { + unsigned long flags; int ret; ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); @@ -156,7 +157,9 @@ qla24xx_disable_vp(scsi_qla_host_t *vha) atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); /* Remove port id from vp target map */ + spin_lock_irqsave(&vha->hw->vport_slock, flags); qlt_update_vp_map(vha, RESET_AL_PA); + spin_unlock_irqrestore(&vha->hw->vport_slock, flags); qla2x00_mark_vp_devices_dead(vha); atomic_set(&vha->vp_state, VP_FAILED); From c046aa0f0f47719a38854fc6383216392b130704 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:31 -0700 Subject: [PATCH 037/174] tcm_qla2xxx: Format VPD page 83h SCSI name string according to SPC My draft of SPC-4 says the following about the SCSI name string in inquiry VPD page 83h: The SCSI NAME STRING field starts with either: a) the four UTF-8 characters 'eui.' concatenated with 16, 24, or 32 hexadecimal digits (i.e., the UTF-8 characters 0 through 9 and A through F) for an EUI-64 based identifier (see 7.8.6.5). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the EUI-64 based identifier; b) the four UTF-8 characters 'naa.' concatenated with 16 or 32 hexadecimal digits for an NAA identifier (see 7.8.6.6). The first hexadecimal digit shall be the most significant four bits of the first byte (i.e., most significant byte) of the NAA identifier; or c) the four UTF-8 characters 'iqn.' concatenated with an iSCSI Name for an iSCSI-name based identifier (see iSCSI). However, the .tpg_get_wwn method for tcm_qla2xxx formats the WWN so the SCSI name string looks like "52:4a:93:7d:24:5f:b2:12,t,0x0001". This patch corrects the code so that VPD 83h gives a SPC-compliant SCSI name string like "naa.524a937d245fb212,t,0x0001" while leavig other uses alone (so configfs will still work with ':' separated WWNs). Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 +++- drivers/scsi/qla2xxx/tcm_qla2xxx.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 2358c16c4c8e..d8211ccc413a 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -237,7 +237,7 @@ static char *tcm_qla2xxx_get_fabric_wwn(struct se_portal_group *se_tpg) struct tcm_qla2xxx_tpg, se_tpg); struct tcm_qla2xxx_lport *lport = tpg->lport; - return &lport->lport_name[0]; + return lport->lport_naa_name; } static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg) @@ -1534,6 +1534,7 @@ static struct se_wwn *tcm_qla2xxx_make_lport( lport->lport_wwpn = wwpn; tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN, wwpn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn); ret = tcm_qla2xxx_init_lport(lport); if (ret != 0) @@ -1601,6 +1602,7 @@ static struct se_wwn *tcm_qla2xxx_npiv_make_lport( lport->lport_npiv_wwnn = npiv_wwnn; tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0], TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn); + sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn); /* FIXME: tcm_qla2xxx_npiv_make_lport */ ret = -ENOSYS; diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 825498103352..9ba075fe9781 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -61,6 +61,8 @@ struct tcm_qla2xxx_lport { u64 lport_npiv_wwnn; /* ASCII formatted WWPN for FC Target Lport */ char lport_name[TCM_QLA2XXX_NAMELEN]; + /* ASCII formatted naa WWPN for VPD page 83 etc */ + char lport_naa_name[TCM_QLA2XXX_NAMELEN]; /* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */ char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN]; /* map for fc_port pointers in 24-bit FC Port ID space */ From c8292d1da53fa60c7516ab03a9d83f7ea266d335 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 11 Oct 2012 13:41:32 -0700 Subject: [PATCH 038/174] qla2xxx: Update target lookup session tables when a target session changes It is possible for the target code to change the loop_id or s_id of a target session in reaction to an FC fabric change. However, the session structures are stored in tables that are indexed by these two keys, and if we just change the session structure but leave the pointers to it in the old places in the table, havoc can ensue. For example, a new session might come along that should go in the old slot in the table and overwrite the old session pointer. To handle this, add a new tgt_ops->update_sess() method that also updates the "by loop_id" and "by s_id" lookup tables when a session changes, so that the keys where a session pointer is stored in these tables always matches the keys in the session structure itself. (nab: Drop unnecessary double inversion with FCF_CONF_COMP_SUPPORTED usage) Signed-off-by: Roland Dreier Cc: Chad Dupuis Cc: Arun Easi Cc: Saurav Kashyap Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/scsi/qla2xxx/qla_target.c | 25 +++++----- drivers/scsi/qla2xxx/qla_target.h | 1 + drivers/scsi/qla2xxx/tcm_qla2xxx.c | 73 ++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0e09d8f433d1..62aa5584f644 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -557,6 +557,7 @@ static bool qlt_check_fcport_exist(struct scsi_qla_host *vha, int pmap_len; fc_port_t *fcport; int global_resets; + unsigned long flags; retry: global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count); @@ -625,10 +626,10 @@ retry: sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain, fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + spin_unlock_irqrestore(&ha->hardware_lock, flags); res = true; @@ -740,10 +741,9 @@ static struct qla_tgt_sess *qlt_create_sess( qlt_undelete_sess(sess); kref_get(&sess->se_sess->sess_kref); - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); + if (sess->local && !local) sess->local = 0; spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -796,8 +796,7 @@ static struct qla_tgt_sess *qlt_create_sess( */ kref_get(&sess->se_sess->sess_kref); - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED); BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name)); memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name)); @@ -869,10 +868,8 @@ void qlt_fc_port_added(struct scsi_qla_host *vha, fc_port_t *fcport) ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007, "Reappeared sess %p\n", sess); } - sess->s_id = fcport->d_id; - sess->loop_id = fcport->loop_id; - sess->conf_compl_supported = !!(fcport->flags & - FCF_CONF_COMP_SUPPORTED); + ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id, + (fcport->flags & FCF_CONF_COMP_SUPPORTED)); } if (sess && sess->local) { diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 170af1571214..bad749561ec2 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -648,6 +648,7 @@ struct qla_tgt_func_tmpl { int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *, void *, uint8_t *, uint16_t); + void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool); struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *, const uint16_t); struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *, diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d8211ccc413a..3d74f2f39ae1 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1457,6 +1457,78 @@ static int tcm_qla2xxx_check_initiator_node_acl( return 0; } +static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id, + uint16_t loop_id, bool conf_compl_supported) +{ + struct qla_tgt *tgt = sess->tgt; + struct qla_hw_data *ha = tgt->ha; + struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr; + struct se_node_acl *se_nacl = sess->se_sess->se_node_acl; + struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl, + struct tcm_qla2xxx_nacl, se_node_acl); + u32 key; + + + if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24) + pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n", + sess, + sess->port_name[0], sess->port_name[1], + sess->port_name[2], sess->port_name[3], + sess->port_name[4], sess->port_name[5], + sess->port_name[6], sess->port_name[7], + sess->loop_id, loop_id, + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa, + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + + if (sess->loop_id != loop_id) { + /* + * Because we can shuffle loop IDs around and we + * update different sessions non-atomically, we might + * have overwritten this session's old loop ID + * already, and we might end up overwriting some other + * session that will be updated later. So we have to + * be extra careful and we can't warn about those things... + */ + if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl) + lport->lport_loopid_map[sess->loop_id].se_nacl = NULL; + + lport->lport_loopid_map[loop_id].se_nacl = se_nacl; + + sess->loop_id = loop_id; + } + + if (sess->s_id.b24 != s_id.b24) { + key = (((u32) sess->s_id.b.domain << 16) | + ((u32) sess->s_id.b.area << 8) | + ((u32) sess->s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) + WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl, + "Found wrong se_nacl when updating s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + else + WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n", + sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa); + + key = (((u32) s_id.b.domain << 16) | + ((u32) s_id.b.area << 8) | + ((u32) s_id.b.al_pa)); + + if (btree_lookup32(&lport->lport_fcport_map, key)) { + WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n", + s_id.b.domain, s_id.b.area, s_id.b.al_pa); + btree_update32(&lport->lport_fcport_map, key, se_nacl); + } else { + btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC); + } + + sess->s_id = s_id; + nacl->nport_id = key; + } + + sess->conf_compl_supported = conf_compl_supported; +} + /* * Calls into tcm_qla2xxx used by qla2xxx LLD I/O path. */ @@ -1467,6 +1539,7 @@ static struct qla_tgt_func_tmpl tcm_qla2xxx_template = { .free_cmd = tcm_qla2xxx_free_cmd, .free_mcmd = tcm_qla2xxx_free_mcmd, .free_session = tcm_qla2xxx_free_session, + .update_sess = tcm_qla2xxx_update_sess, .check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl, .find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id, .find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id, From badecb001a310408d3473b1fc2ed5aefd0bc92a9 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 26 Oct 2012 18:54:25 +0200 Subject: [PATCH 039/174] mac80211: fix SSID copy on IBSS JOIN The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and its length is likely to be less than IEEE80211_MAX_SSID_LEN most of the time. This patch fixes the ssid copy in ieee80211_ibss_join() by using the SSID length to prevent it from reading beyond the string. Cc: stable@vger.kernel.org Signed-off-by: Antonio Quartulli [rewrapped commit message, small rewording] Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5f3620f0bc0a..bf87c70ac6c5 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1108,7 +1108,7 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; sdata->u.ibss.ibss_join_req = jiffies; - memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN); + memcpy(sdata->u.ibss.ssid, params->ssid, params->ssid_len); sdata->u.ibss.ssid_len = params->ssid_len; mutex_unlock(&sdata->u.ibss.mtx); From 7dd111e8ee10cc6816669eabcad3334447673236 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 25 Oct 2012 21:51:59 +0200 Subject: [PATCH 040/174] wireless: drop invalid mesh address extension frames The mesh header can have address extension by a 4th or a 5th and 6th address, but never both. Drop such frames in 802.11 -> 802.3 conversion along with any frames that have the wrong extension. Cc: stable@vger.kernel.org Reviewed-by: Javier Cardona Signed-off-by: Johannes Berg --- net/wireless/util.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index ef35f4ef2aa6..45a09de1ffe3 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -312,18 +312,15 @@ EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) { int ae = meshhdr->flags & MESH_FLAGS_AE; - /* 7.1.3.5a.2 */ + /* 802.11-2012, 8.2.4.7.3 */ switch (ae) { + default: case 0: return 6; case MESH_FLAGS_AE_A4: return 12; case MESH_FLAGS_AE_A5_A6: return 18; - case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6): - return 24; - default: - return 6; } } @@ -373,6 +370,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, /* make sure meshdr->flags is on the linear part */ if (!pskb_may_pull(skb, hdrlen + 1)) return -1; + if (meshdr->flags & MESH_FLAGS_AE_A4) + return -1; if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { skb_copy_bits(skb, hdrlen + offsetof(struct ieee80211s_hdr, eaddr1), @@ -397,6 +396,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, /* make sure meshdr->flags is on the linear part */ if (!pskb_may_pull(skb, hdrlen + 1)) return -1; + if (meshdr->flags & MESH_FLAGS_AE_A5_A6) + return -1; if (meshdr->flags & MESH_FLAGS_AE_A4) skb_copy_bits(skb, hdrlen + offsetof(struct ieee80211s_hdr, eaddr1), From 4a4f1a5808c8bb0b72a4f6e5904c53fb8c9cd966 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:33:36 +0200 Subject: [PATCH 041/174] mac80211: check management frame header length Due to pskb_may_pull() checking the skb length, all non-management frames are checked on input whether their 802.11 header is fully present. Also add that check for management frames and remove a check that is now duplicate. This prevents accessing skb data beyond the frame end. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c6865f2f47f8..99cdee16e31b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1470,7 +1470,6 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) frag = sc & IEEE80211_SCTL_FRAG; if (likely((!ieee80211_has_morefrags(fc) && frag == 0) || - (rx->skb)->len < 24 || is_multicast_ether_addr(hdr->addr1))) { /* not fragmented */ goto out; @@ -2915,10 +2914,15 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc)) local->dot11ReceivedFragmentCount++; - if (ieee80211_is_mgmt(fc)) - err = skb_linearize(skb); - else + if (ieee80211_is_mgmt(fc)) { + /* drop frame if too short for header */ + if (skb->len < ieee80211_hdrlen(fc)) + err = -ENOBUFS; + else + err = skb_linearize(skb); + } else { err = !pskb_may_pull(skb, ieee80211_hdrlen(fc)); + } if (err) { dev_kfree_skb(skb); From 9b395bc3be1cebf0144a127c7e67d56dbdac0930 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:36:40 +0200 Subject: [PATCH 042/174] mac80211: verify that skb data is present A number of places in the mesh code don't check that the frame data is present and in the skb header when trying to access. Add those checks and the necessary pskb_may_pull() calls. This prevents accessing data that doesn't actually exist. To do this, export ieee80211_get_mesh_hdrlen() to be able to use it in mac80211. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 9 +++++++++ net/mac80211/rx.c | 32 +++++++++++++++++++++++++++++++- net/wireless/util.c | 3 ++- 3 files changed, 42 insertions(+), 2 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f8cd4cf3fad8..7d5b6000378b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2651,6 +2651,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); +/** + * ieee80211_get_mesh_hdrlen - get mesh extension header length + * @meshhdr: the mesh extension header, only the flags field + * (first byte) will be accessed + * Returns the length of the extension header, which is always at + * least 6 bytes and at most 18 if address 5 and 6 are present. + */ +unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); + /** * DOC: Data path helpers * diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 99cdee16e31b..265a032dec49 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -531,6 +531,11 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) if (ieee80211_is_action(hdr->frame_control)) { u8 category; + + /* make sure category field is present */ + if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE) + return RX_DROP_MONITOR; + mgmt = (struct ieee80211_mgmt *)hdr; category = mgmt->u.action.category; if (category != WLAN_CATEGORY_MESH_ACTION && @@ -1892,6 +1897,20 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) hdr = (struct ieee80211_hdr *) skb->data; hdrlen = ieee80211_hdrlen(hdr->frame_control); + + /* make sure fixed part of mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, hdrlen + 6)) + return RX_DROP_MONITOR; + + mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen); + + /* make sure full mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, + hdrlen + ieee80211_get_mesh_hdrlen(mesh_hdr))) + return RX_DROP_MONITOR; + + /* reload pointers */ + hdr = (struct ieee80211_hdr *) skb->data; mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen); /* frame is in RMC, don't forward */ @@ -1915,9 +1934,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (is_multicast_ether_addr(hdr->addr1)) { mpp_addr = hdr->addr3; proxied_addr = mesh_hdr->eaddr1; - } else { + } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) { + /* has_a4 already checked in ieee80211_rx_mesh_check */ mpp_addr = hdr->addr4; proxied_addr = mesh_hdr->eaddr2; + } else { + return RX_DROP_MONITOR; } rcu_read_lock(); @@ -2354,6 +2376,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; case WLAN_CATEGORY_SELF_PROTECTED: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.self_prot.action_code))) + break; + switch (mgmt->u.action.u.self_prot.action_code) { case WLAN_SP_MESH_PEERING_OPEN: case WLAN_SP_MESH_PEERING_CLOSE: @@ -2372,6 +2398,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; case WLAN_CATEGORY_MESH_ACTION: + if (len < (IEEE80211_MIN_ACTION_SIZE + + sizeof(mgmt->u.action.u.mesh_action.action_code))) + break; + if (!ieee80211_vif_is_mesh(&sdata->vif)) break; if (mesh_action_is_path_sel(mgmt) && diff --git a/net/wireless/util.c b/net/wireless/util.c index 45a09de1ffe3..2762e8329986 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -309,7 +309,7 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) } EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); -static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) +unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) { int ae = meshhdr->flags & MESH_FLAGS_AE; /* 802.11-2012, 8.2.4.7.3 */ @@ -323,6 +323,7 @@ static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) return 18; } } +EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype) From 6dbda2d00d466225f9db1dc695ff852443f28832 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 00:41:23 +0200 Subject: [PATCH 043/174] mac80211: make sure data is accessible in EAPOL check The code to allow EAPOL frames even when the station isn't yet marked associated needs to check that the incoming frame is long enough and due to paged RX it also can't assume skb->data contains the right data, it must use skb_copy_bits(). Fix this to avoid using data that doesn't really exist. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 265a032dec49..00ade7feb2e3 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -888,14 +888,16 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx) */ if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION && ieee80211_is_data_present(hdr->frame_control)) { - u16 ethertype; - u8 *payload; + unsigned int hdrlen; + __be16 ethertype; - payload = rx->skb->data + - ieee80211_hdrlen(hdr->frame_control); - ethertype = (payload[6] << 8) | payload[7]; - if (cpu_to_be16(ethertype) == - rx->sdata->control_port_protocol) + hdrlen = ieee80211_hdrlen(hdr->frame_control); + + if (rx->skb->len < hdrlen + 8) + return RX_DROP_MONITOR; + + skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2); + if (ethertype == rx->sdata->control_port_protocol) return RX_CONTINUE; } From e13d5fef88c40b87c8430f8274c3a9ca32ef90bc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 26 Oct 2012 15:35:45 -0700 Subject: [PATCH 044/174] target: Fix double-free of se_cmd in target_complete_tmr_failure Fabric drivers currently expect to internally release se_cmd in the event of a TMR failure during target_submit_tmr(), which means the immediate call to transport_generic_free_cmd() after TFO->queue_tm_rsp() from within target_complete_tmr_failure() workqueue context is wrong. This is done as some fabrics expect TMR operations to be acknowledged before releasing the descriptor, so the assumption that core is releasing se_cmd associated TMR memory is incorrect. This fixes a OOPs where transport_generic_free_cmd() was being called more than once. This bug was originally observed with tcm_qla2xxx fabric ports. Cc: Christoph Hellwig Cc: Roland Dreier Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index c33baff86aa6..9097155e9ebe 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1616,7 +1616,6 @@ static void target_complete_tmr_failure(struct work_struct *work) se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST; se_cmd->se_tfo->queue_tm_rsp(se_cmd); - transport_generic_free_cmd(se_cmd, 0); } /** From 1a1ff38c4cebf23be8bf0009a76b082a13bd25cb Mon Sep 17 00:00:00 2001 From: Bernhard Kohl Date: Wed, 24 Oct 2012 15:53:58 +0200 Subject: [PATCH 045/174] target: reintroduce some obsolete SCSI-2 commands With kernel 3.6 some obsolete SCSI-2 commands including SEEK_10 have have been removed by commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f "target: move code for CDB emulation". There are still clients out there which use these old SCSI-2 commands. This mainly happens when running VMs with legacy guest systems, connected via SCSI command pass-through to iSCSI targets. Make them happy and return status GOOD. Many real SCSI disks or external iSCSI storage devices still support these old commands. So let's make LIO backward compatible as well. This patch adds support for the previously removed SEEK_10 and additionally the SEEK_6 and REZERO_UNIT commands. Signed-off-by: Bernhard Kohl Reviewed-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_sbc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 868f8aa04f13..a6e27d967c7b 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -135,6 +135,12 @@ static int sbc_emulate_verify(struct se_cmd *cmd) return 0; } +static int sbc_emulate_noop(struct se_cmd *cmd) +{ + target_complete_cmd(cmd, GOOD); + return 0; +} + static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors) { return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors; @@ -531,6 +537,18 @@ int sbc_parse_cdb(struct se_cmd *cmd, struct spc_ops *ops) size = 0; cmd->execute_cmd = sbc_emulate_verify; break; + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + /* + * There are still clients out there which use these old SCSI-2 + * commands. This mainly happens when running VMs with legacy + * guest systems, connected via SCSI command pass-through to + * iSCSI targets. Make them happy and return status GOOD. + */ + size = 0; + cmd->execute_cmd = sbc_emulate_noop; + break; default: ret = spc_parse_cdb(cmd, &size); if (ret) From c9c55d9211150b589d2d39a45cf5f96c70a51a47 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 26 Oct 2012 14:26:04 -0500 Subject: [PATCH 046/174] gpio/omap: fix off-mode bug: clear debounce settings on free/reset This change was originally titled "gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset". The title has been updated slightly to reflect (what should be) the final fix. When a GPIO is freed or shutdown, we need to ensure that any debounce settings are cleared and if the GPIO is the only GPIO in the bank that is currently using debounce, then disable the debounce clock as well to save power. Currently, the debounce settings are not cleared on a GPIO free or shutdown and so during a context restore on subsequent off-mode transition, the previous debounce values are restored from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix this, introduce a new function called _clear_gpio_debounce() to clear any debounce settings when the GPIO is freed or shutdown. If this GPIO is the last debounce-enabled GPIO in the bank, the debounce will also be cut. Please note that we cannot use _gpio_dbck_disable() to disable the debounce clock because this has been specifically created for the gpio suspend path and is intended to shutdown the debounce clock while debounce is enabled. Special thanks to Kevin Hilman for root causing the bug. This fix is a collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and Santosh Shilimkar. Testing: - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio, enabling debounce and then freeing the gpio and checking the register contents, the saved register context and the debounce clock state. - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the ads7846 touchscreen in its board file using the above sequence, and so was failing off-mode tests in dynamic idle. Verified that off-mode tests are passing with this patch. V5 changes: - Corrected author Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Cc: Jon Hunter Signed-off-by: Jon Hunter Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc842fbc3..d335af1d4d85 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, } } +/** + * _clear_gpio_debounce - clear debounce settings for a gpio + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * + * If a gpio is using debounce, then clear the debounce enable bit and if + * this is the only gpio in this bank using debounce, then clear the debounce + * time too. The debounce clock will also be disabled when calling this function + * if this is the only gpio in the bank using debounce. + */ +static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio) +{ + u32 gpio_bit = GPIO_BIT(bank, gpio); + + if (!bank->dbck_flag) + return; + + if (!(bank->dbck_enable_mask & gpio_bit)) + return; + + bank->dbck_enable_mask &= ~gpio_bit; + bank->context.debounce_en &= ~gpio_bit; + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + + if (!bank->dbck_enable_mask) { + bank->context.debounce = 0; + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, unsigned trigger) { @@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + _clear_gpio_debounce(bank, gpio); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ From 257d36fd696d76b622539c26af652d2a8a931ce9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Oct 2012 09:31:02 -0700 Subject: [PATCH 047/174] ASoC: zoom2: Fix compile error by including correct header files Also drop the includes that are no longer needed and just cause problems for the ARM common zImage. Acked-by: Peter Ujfalusi Signed-off-by: Tim Gardner [tony@atomide.com: updated to drop unneeded headers] Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown --- sound/soc/omap/zoom2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c index 677b567935f8..1ff6bb9ade5c 100644 --- a/sound/soc/omap/zoom2.c +++ b/sound/soc/omap/zoom2.c @@ -21,15 +21,14 @@ #include #include +#include #include #include #include #include -#include -#include -#include #include +#include /* Register descriptions for twl4030 codec part */ #include From 19118eb8dc3cd6bb1b1fdf0e4ad62070c6683158 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 26 Oct 2012 12:33:08 +0200 Subject: [PATCH 048/174] ASoC: omap-dmic: Correct functional clock name We should really use "fck" when asking for the functional clock and not "dmic_fck". This way we can ensure that multiple dmic modules can exist in the system. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/omap-dmic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c index 68f2cd1a9206..5a6aeaf552a8 100644 --- a/sound/soc/omap/omap-dmic.c +++ b/sound/soc/omap/omap-dmic.c @@ -464,9 +464,9 @@ static __devinit int asoc_dmic_probe(struct platform_device *pdev) mutex_init(&dmic->mutex); - dmic->fclk = clk_get(dmic->dev, "dmic_fck"); + dmic->fclk = clk_get(dmic->dev, "fck"); if (IS_ERR(dmic->fclk)) { - dev_err(dmic->dev, "cant get dmic_fck\n"); + dev_err(dmic->dev, "cant get fck\n"); return -ENODEV; } From 31d178bffcff4c468c8c65bc42d9f4c0a7b8e3ec Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:00 +0100 Subject: [PATCH 049/174] i2c-stub: Move to drivers/i2c Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry. This is less confusing that way. I also fixed all checkpatch warnings and errors. Signed-off-by: Jean Delvare Cc: Peter Huewe --- drivers/i2c/Makefile | 1 + drivers/i2c/busses/Makefile | 1 - drivers/i2c/{busses => }/i2c-stub.c | 66 ++++++++++++++--------------- 3 files changed, 33 insertions(+), 35 deletions(-) rename drivers/i2c/{busses => }/i2c-stub.c (75%) diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index beee6b2d361d..1722f50f2473 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o obj-y += algos/ busses/ muxes/ +obj-$(CONFIG_I2C_STUB) += i2c-stub.o ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG CFLAGS_i2c-core.o := -Wno-deprecated-declarations diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2d33d62952c1..395b516ffa08 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o -obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/i2c-stub.c similarity index 75% rename from drivers/i2c/busses/i2c-stub.c rename to drivers/i2c/i2c-stub.c index b1b3447942c9..d0a9c590c3cd 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/i2c-stub.c @@ -2,7 +2,7 @@ i2c-stub.c - I2C/SMBus chip emulator Copyright (c) 2004 Mark M. Hoffman - Copyright (C) 2007 Jean Delvare + Copyright (C) 2007, 2012 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -51,8 +51,8 @@ struct stub_chip { static struct stub_chip *stub_chips; /* Return negative errno on error. */ -static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) +static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data *data) { s32 ret; int i, len; @@ -78,14 +78,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, case I2C_SMBUS_BYTE: if (read_write == I2C_SMBUS_WRITE) { chip->pointer = command; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "wrote 0x%02x.\n", - addr, command); + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, wrote 0x%02x.\n", + addr, command); } else { data->byte = chip->words[chip->pointer++] & 0xff; - dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " - "read 0x%02x.\n", - addr, data->byte); + dev_dbg(&adap->dev, + "smbus byte - addr 0x%02x, read 0x%02x.\n", + addr, data->byte); } ret = 0; @@ -95,14 +95,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, if (read_write == I2C_SMBUS_WRITE) { chip->words[command] &= 0xff00; chip->words[command] |= data->byte; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "wrote 0x%02x at 0x%02x.\n", - addr, data->byte, command); + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n", + addr, data->byte, command); } else { data->byte = chip->words[command] & 0xff; - dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " - "read 0x%02x at 0x%02x.\n", - addr, data->byte, command); + dev_dbg(&adap->dev, + "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n", + addr, data->byte, command); } chip->pointer = command + 1; @@ -112,14 +112,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, case I2C_SMBUS_WORD_DATA: if (read_write == I2C_SMBUS_WRITE) { chip->words[command] = data->word; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "wrote 0x%04x at 0x%02x.\n", - addr, data->word, command); + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n", + addr, data->word, command); } else { data->word = chip->words[command]; - dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " - "read 0x%04x at 0x%02x.\n", - addr, data->word, command); + dev_dbg(&adap->dev, + "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n", + addr, data->word, command); } ret = 0; @@ -132,17 +132,17 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, chip->words[command + i] &= 0xff00; chip->words[command + i] |= data->block[1 + i]; } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "wrote %d bytes at 0x%02x.\n", - addr, len, command); + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n", + addr, len, command); } else { for (i = 0; i < len; i++) { data->block[1 + i] = chip->words[command + i] & 0xff; } - dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, " - "read %d bytes at 0x%02x.\n", - addr, len, command); + dev_dbg(&adap->dev, + "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n", + addr, len, command); } ret = 0; @@ -179,25 +179,24 @@ static int __init i2c_stub_init(void) int i, ret; if (!chip_addr[0]) { - printk(KERN_ERR "i2c-stub: Please specify a chip address\n"); + pr_err("i2c-stub: Please specify a chip address\n"); return -ENODEV; } for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) { if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) { - printk(KERN_ERR "i2c-stub: Invalid chip address " - "0x%02x\n", chip_addr[i]); + pr_err("i2c-stub: Invalid chip address 0x%02x\n", + chip_addr[i]); return -EINVAL; } - printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", - chip_addr[i]); + pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]); } /* Allocate memory for all chips at once */ stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL); if (!stub_chips) { - printk(KERN_ERR "i2c-stub: Out of memory\n"); + pr_err("i2c-stub: Out of memory\n"); return -ENOMEM; } @@ -219,4 +218,3 @@ MODULE_LICENSE("GPL"); module_init(i2c_stub_init); module_exit(i2c_stub_exit); - From 79e3e5b894926d3c7b1efc69e0c5be723ceb88bd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: [PATCH 050/174] i2c-i801: Simplify dependency towards GPIOLIB Arbitrarily selecting GPIOLIB causes trouble on some architectures, so don't do that. Instead, just make the optional multiplexing code depend on CONFIG_I2C_MUX_GPIO instead of CONFIG_I2C_MUX for now. We can revisit if the i2c-i801 driver ever supports other multiplexing flavors. Also make that optional code depend on DMI, as it won't do anything without that. Signed-off-by: Jean Delvare Cc: Fengguang Wu --- drivers/i2c/busses/Kconfig | 1 - drivers/i2c/busses/i2c-i801.c | 9 ++++++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 65dd599a0262..e9df4612b7eb 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -81,7 +81,6 @@ config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI select CHECK_SIGNATURE if X86 && DMI - select GPIOLIB if I2C_MUX help If you say yes to this option, support will be included for the Intel 801 family of mainboard I2C interfaces. Specifically, the following diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 37793156bd93..3bc3f7302035 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -82,7 +82,8 @@ #include #include -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI #include #include #include @@ -192,7 +193,8 @@ struct i801_priv { int len; u8 *data; -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI const struct i801_mux_config *mux_drvdata; struct platform_device *mux_pdev; #endif @@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {} static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {} #endif /* CONFIG_X86 && CONFIG_DMI */ -#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE +#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ + defined CONFIG_DMI static struct i801_mux_config i801_mux_config_asus_z8_d12 = { .gpio_chip = "gpio_ich", .values = { 0x02, 0x03 }, From 28901f579486a69cfdf7f294a3b5a97b173fb74a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Oct 2012 21:37:01 +0100 Subject: [PATCH 051/174] i2c-i801: Fix comment Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 3bc3f7302035..6abc00d59881 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1062,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv) id = dmi_first_match(mux_dmi_table); if (id) { - /* Remove from branch classes from trunk */ + /* Remove branch classes from trunk */ mux_config = id->driver_data; for (i = 0; i < mux_config->n_values; i++) class &= ~mux_config->classes[i]; From 38fe36a248ec3228f8e6507955d7ceb0432d2000 Mon Sep 17 00:00:00 2001 From: Ulrich Weber Date: Thu, 25 Oct 2012 05:34:45 +0000 Subject: [PATCH 052/174] netfilter: nf_nat: don't check for port change on ICMP tuples ICMP tuples have id in src and type/code in dst. So comparing src.u.all with dst.u.all will always fail here and ip_xfrm_me_harder() is called for every ICMP packet, even if there was no NAT. Signed-off-by: Ulrich Weber Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/iptable_nat.c | 4 +++- net/ipv6/netfilter/ip6table_nat.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv4/netfilter/iptable_nat.c b/net/ipv4/netfilter/iptable_nat.c index 9e0ffaf1d942..a82047282dbb 100644 --- a/net/ipv4/netfilter/iptable_nat.c +++ b/net/ipv4/netfilter/iptable_nat.c @@ -184,7 +184,8 @@ nf_nat_ipv4_out(unsigned int hooknum, if ((ct->tuplehash[dir].tuple.src.u3.ip != ct->tuplehash[!dir].tuple.dst.u3.ip) || - (ct->tuplehash[dir].tuple.src.u.all != + (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP && + ct->tuplehash[dir].tuple.src.u.all != ct->tuplehash[!dir].tuple.dst.u.all)) if (nf_xfrm_me_harder(skb, AF_INET) < 0) ret = NF_DROP; @@ -221,6 +222,7 @@ nf_nat_ipv4_local_fn(unsigned int hooknum, } #ifdef CONFIG_XFRM else if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) && + ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP && ct->tuplehash[dir].tuple.dst.u.all != ct->tuplehash[!dir].tuple.src.u.all) if (nf_xfrm_me_harder(skb, AF_INET) < 0) diff --git a/net/ipv6/netfilter/ip6table_nat.c b/net/ipv6/netfilter/ip6table_nat.c index e418bd6350a4..d57dab17a182 100644 --- a/net/ipv6/netfilter/ip6table_nat.c +++ b/net/ipv6/netfilter/ip6table_nat.c @@ -186,7 +186,8 @@ nf_nat_ipv6_out(unsigned int hooknum, if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3) || - (ct->tuplehash[dir].tuple.src.u.all != + (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 && + ct->tuplehash[dir].tuple.src.u.all != ct->tuplehash[!dir].tuple.dst.u.all)) if (nf_xfrm_me_harder(skb, AF_INET6) < 0) ret = NF_DROP; @@ -222,6 +223,7 @@ nf_nat_ipv6_local_fn(unsigned int hooknum, } #ifdef CONFIG_XFRM else if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) && + ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 && ct->tuplehash[dir].tuple.dst.u.all != ct->tuplehash[!dir].tuple.src.u.all) if (nf_xfrm_me_harder(skb, AF_INET6)) From f1df1374dc83d62588667e566e959df384718ad1 Mon Sep 17 00:00:00 2001 From: Hein Tibosch Date: Fri, 26 Oct 2012 23:49:26 +0000 Subject: [PATCH 053/174] netfilter: nf_defrag_ipv6: solve section mismatch in nf_conntrack_reasm WARNING: net/ipv6/netfilter/nf_defrag_ipv6.o(.text+0xe0): Section mismatch in reference from the function nf_ct_net_init() to the function .init.text:nf_ct_frag6_sysctl_register() The function nf_ct_net_init() references the function __init nf_ct_frag6_sysctl_register(). In case nf_conntrack_ipv6 is compiled as a module, nf_ct_net_init could be called after the init code and data are unloaded. Therefore remove the "__net_init" annotation from nf_ct_frag6_sysctl_register(). Signed-off-by: Hein Tibosch Acked-by: Cong Wang Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/nf_conntrack_reasm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 18bd9bbbd1c6..22c8ea951185 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -85,7 +85,7 @@ static struct ctl_table nf_ct_frag6_sysctl_table[] = { { } }; -static int __net_init nf_ct_frag6_sysctl_register(struct net *net) +static int nf_ct_frag6_sysctl_register(struct net *net) { struct ctl_table *table; struct ctl_table_header *hdr; @@ -127,7 +127,7 @@ static void __net_exit nf_ct_frags6_sysctl_unregister(struct net *net) } #else -static int __net_init nf_ct_frag6_sysctl_register(struct net *net) +static int nf_ct_frag6_sysctl_register(struct net *net) { return 0; } From ffb5387e85d528fb6d0d924abfa3fbf0fc484071 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sun, 28 Oct 2012 22:24:57 -0400 Subject: [PATCH 054/174] ext4: fix unjournaled inode bitmap modification commit 119c0d4460b001e44b41dcf73dc6ee794b98bd31 changed ext4_new_inode() such that the inode bitmap was being modified outside a transaction, which could lead to corruption, and was discovered when journal_checksum found a bad checksum in the journal during log replay. Nix ran into this when using the journal_async_commit mount option, which enables journal checksumming. The ensuing journal replay failures due to the bad checksums led to filesystem corruption reported as the now infamous "Apparent serious progressive ext4 data corruption bug" [ Changed by tytso to only call ext4_journal_get_write_access() only when we're fairly certain that we're going to allocate the inode. ] I've tested this by mounting with journal_checksum and running fsstress then dropping power; I've also tested by hacking DM to create snapshots w/o first quiescing, which allows me to test journal replay repeatedly w/o actually power-cycling the box. Without the patch I hit a journal checksum error every time. With this fix it survives many iterations. Reported-by: Nix Signed-off-by: Eric Sandeen Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- fs/ext4/ialloc.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 4facdd29a350..3a100e7a62a8 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -725,6 +725,10 @@ repeat_in_this_group: "inode=%lu", ino + 1); continue; } + BUFFER_TRACE(inode_bitmap_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, inode_bitmap_bh); + if (err) + goto fail; ext4_lock_group(sb, group); ret2 = ext4_test_and_set_bit(ino, inode_bitmap_bh->b_data); ext4_unlock_group(sb, group); @@ -738,6 +742,11 @@ repeat_in_this_group: goto out; got: + BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata"); + err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh); + if (err) + goto fail; + /* We may have to initialize the block bitmap if it isn't already */ if (ext4_has_group_desc_csum(sb) && gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { @@ -771,11 +780,6 @@ got: goto fail; } - BUFFER_TRACE(inode_bitmap_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, inode_bitmap_bh); - if (err) - goto fail; - BUFFER_TRACE(group_desc_bh, "get_write_access"); err = ext4_journal_get_write_access(handle, group_desc_bh); if (err) @@ -823,11 +827,6 @@ got: } ext4_unlock_group(sb, group); - BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata"); - err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh); - if (err) - goto fail; - BUFFER_TRACE(group_desc_bh, "call ext4_handle_dirty_metadata"); err = ext4_handle_dirty_metadata(handle, NULL, group_desc_bh); if (err) From 52eb5a900a9863a8b77a895f770e5d825c8e02c6 Mon Sep 17 00:00:00 2001 From: David Zafman Date: Thu, 18 Oct 2012 14:01:43 -0700 Subject: [PATCH 055/174] ceph: fix dentry reference leak in encode_fh() Call to d_find_alias() needs a corresponding dput() This fixes http://tracker.newdream.net/issues/3271 Signed-off-by: David Zafman Reviewed-by: Sage Weil --- fs/ceph/export.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ceph/export.c b/fs/ceph/export.c index 8e1b60e557b6..862887004d20 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -90,6 +90,8 @@ static int ceph_encode_fh(struct inode *inode, u32 *rawfh, int *max_len, *max_len = handle_length; type = 255; } + if (dentry) + dput(dentry); return type; } From 8c6e30936a7893a85f6222084f0f26aceb81137a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 26 Oct 2012 00:31:11 +0200 Subject: [PATCH 056/174] ath9k: fix stale pointers potentially causing access to free'd skbs bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 378bd70256b2..1ffca7511fa8 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -312,6 +312,7 @@ static struct ath_buf *ath_tx_get_buffer(struct ath_softc *sc) } bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list); + bf->bf_next = NULL; list_del(&bf->list); spin_unlock_bh(&sc->tx.txbuflock); @@ -1774,6 +1775,7 @@ static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, list_add_tail(&bf->list, &bf_head); bf->bf_state.bf_type = 0; + bf->bf_next = NULL; bf->bf_lastbf = bf; ath_tx_fill_desc(sc, bf, txq, fi->framelen); ath_tx_txqaddbuf(sc, txq, &bf_head, false); From d034fbf08b6fe86271d0d0bd332edabeb5749fd6 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 29 Oct 2012 18:50:47 +0100 Subject: [PATCH 057/174] hwmon, fam15h_power: Change email address, MAINTAINERS entry Signed-off-by: Andreas Herrmann Signed-off-by: Guenter Roeck --- Documentation/hwmon/fam15h_power | 2 +- MAINTAINERS | 2 +- drivers/hwmon/fam15h_power.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index a92918e0bd69..80654813d04a 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -10,7 +10,7 @@ Supported chips: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors (not yet published) -Author: Andreas Herrmann +Author: Andreas Herrmann Description ----------- diff --git a/MAINTAINERS b/MAINTAINERS index 1fa907441f8f..a4e81367a3a1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -503,7 +503,7 @@ F: include/linux/altera_uart.h F: include/linux/altera_jtaguart.h AMD FAM15H PROCESSOR POWER MONITORING DRIVER -M: Andreas Herrmann +M: Andreas Herrmann L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/fam15h_power diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 68ad7d255512..4f4110407387 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -2,7 +2,7 @@ * fam15h_power.c - AMD Family 15h processor power monitoring * * Copyright (c) 2011 Advanced Micro Devices, Inc. - * Author: Andreas Herrmann + * Author: Andreas Herrmann * * * This driver is free software; you can redistribute it and/or @@ -28,7 +28,7 @@ #include MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor"); -MODULE_AUTHOR("Andreas Herrmann "); +MODULE_AUTHOR("Andreas Herrmann "); MODULE_LICENSE("GPL"); /* D18F3 */ From b216e12d062d060f2c7b1a49b4b6a6a442cae79c Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Mon, 29 Oct 2012 23:45:30 -0700 Subject: [PATCH 058/174] Input: wacom - correct bad Cintiq 24HD check Signed-off-by: Fengguang Wu Signed-off-by: Jason Gerecke Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2c1e12bf2ab4..858ad446de91 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf, features->pktlen = WACOM_PKGLEN_TPC2FG; } - if (features->type == MTSCREEN || WACOM_24HDT) + if (features->type == MTSCREEN || features->type == WACOM_24HDT) features->pktlen = WACOM_PKGLEN_MTOUCH; if (features->type == BAMBOO_PT) { From 904adede088f2a6976e417d1d5cf72c9fe686814 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 29 Oct 2012 23:45:09 -0700 Subject: [PATCH 059/174] Input: pxa27x_keypad - clear pending interrupts on keypad config Bootloader can leave interrupt bit pending, and it confuses driver. Signed-off-by: Vasily Khoruzhick Acked-by: Robert Jarzmik Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/pxa27x_keypad.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 803ff6fe021e..cad9d5dd5973 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) unsigned int mask = 0, direct_key_num = 0; unsigned long kpc = 0; + /* clear pending interrupt bit */ + keypad_readl(KPC); + /* enable matrix keys with automatic scan */ if (pdata->matrix_key_rows && pdata->matrix_key_cols) { kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; From e07577e1ddf6d2d31961df897e7ff05c0aeb8d0f Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 29 Oct 2012 22:30:56 -0700 Subject: [PATCH 060/174] Input: lpc32xx-keys - select INPUT_MATRIXKMAP This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP, as the other drivers are doing in this regard. This fixes the following compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not: drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to `matrix_keypad_build_keymap' Signed-off-by: Roland Stigge Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4b65af8612a..de0874054e9f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO config KEYBOARD_LPC32XX tristate "LPC32XX matrix key scanner support" depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP help Say Y here if you want to use NXP LPC32XX SoC key scanner interface, connected to a key matrix. From 2911758f14e36a7cd5c7367f951dcb8817552f71 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 13 Aug 2012 10:53:17 -0400 Subject: [PATCH 061/174] xen/blkback: Fix compile warning drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static? drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static? Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 4f66171c6683..d0fed5582a42 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -196,7 +196,7 @@ static void xen_blkif_disconnect(struct xen_blkif *blkif) } } -void xen_blkif_free(struct xen_blkif *blkif) +static void xen_blkif_free(struct xen_blkif *blkif) { if (!atomic_dec_and_test(&blkif->refcnt)) BUG(); @@ -257,7 +257,7 @@ static struct attribute_group xen_vbdstat_group = { VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor); VBD_SHOW(mode, "%s\n", be->mode); -int xenvbd_sysfs_addif(struct xenbus_device *dev) +static int xenvbd_sysfs_addif(struct xenbus_device *dev) { int error; @@ -281,7 +281,7 @@ fail1: device_remove_file(&dev->dev, &dev_attr_physical_device); return error; } -void xenvbd_sysfs_delif(struct xenbus_device *dev) +static void xenvbd_sysfs_delif(struct xenbus_device *dev) { sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group); device_remove_file(&dev->dev, &dev_attr_mode); From b54e1f88897bcacc2cd359f48ea3b39eaf55f084 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:51 -0300 Subject: [PATCH 062/174] floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop Since commit 070ad7e ("floppy: convert to delayed work and single-thread wq"), we end up calling alloc_ordered_workqueue multiple times inside the loop, which shouldn't be intended. Besides the leak, other side effect in the current code is if blk_init_queue fails, we would end up calling unregister_blkdev even if we didn't call yet register_blkdev. Just moved the allocation of floppy_wq before the loop, and adjusted the code accordingly. Cc: stable@vger.kernel.org # 3.5+ Acked-by: Vivek Goyal Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 17c675c52295..83112f08a41d 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4137,6 +4137,10 @@ static int __init do_floppy_init(void) raw_cmd = NULL; + floppy_wq = alloc_ordered_workqueue("floppy", 0); + if (!floppy_wq) + return -ENOMEM; + for (dr = 0; dr < N_DRIVE; dr++) { disks[dr] = alloc_disk(1); if (!disks[dr]) { @@ -4144,16 +4148,10 @@ static int __init do_floppy_init(void) goto out_put_disk; } - floppy_wq = alloc_ordered_workqueue("floppy", 0); - if (!floppy_wq) { - err = -ENOMEM; - goto out_put_disk; - } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { err = -ENOMEM; - goto out_destroy_workq; + goto out_put_disk; } blk_queue_max_hw_sectors(disks[dr]->queue, 64); @@ -4317,8 +4315,6 @@ out_release_dma: out_unreg_region: blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); platform_driver_unregister(&floppy_driver); -out_destroy_workq: - destroy_workqueue(floppy_wq); out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: @@ -4334,6 +4330,7 @@ out_put_disk: } put_disk(disks[dr]); } + destroy_workqueue(floppy_wq); return err; } From 238ab78469c6ab7845b43d5061cd3c92331b2452 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:52 -0300 Subject: [PATCH 063/174] floppy: do put_disk on current dr if blk_init_queue fails If blk_init_queue fails, we do not call put_disk on the current dr (dr is decremented first in the error handling loop). Cc: stable@vger.kernel.org Reviewed-by: Ben Hutchings Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 83112f08a41d..9a558b63e78f 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4150,6 +4150,7 @@ static int __init do_floppy_init(void) disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); if (!disks[dr]->queue) { + put_disk(disks[dr]); err = -ENOMEM; goto out_put_disk; } From d60e7ec18c3fb2cbf90969ccd42889eb2d03aef9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:54 -0300 Subject: [PATCH 064/174] floppy: properly handle failure on add_disk loop On floppy initialization, if something failed inside the loop we call add_disk, there was no cleanup of previous iterations in the error handling. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9a558b63e78f..2c7257334b64 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4292,7 +4292,7 @@ static int __init do_floppy_init(void) err = platform_device_register(&floppy_device[drive]); if (err) - goto out_release_dma; + goto out_remove_drives; err = device_create_file(&floppy_device[drive].dev, &dev_attr_cmos); @@ -4310,6 +4310,15 @@ static int __init do_floppy_init(void) out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); +out_remove_drives: + while (drive--) { + if ((allowed_drive_mask & (1 << drive)) && + fdc_state[FDC(drive)].version != FDC_NONE) { + del_gendisk(disks[drive]); + device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); + platform_device_unregister(&floppy_device[drive]); + } + } out_release_dma: if (atomic_read(&usage_count)) floppy_release_irq_and_dma(); From 8d3ab4ebfd7435bc248873de47d0ca23076c4973 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Mon, 27 Aug 2012 20:56:55 -0300 Subject: [PATCH 065/174] floppy: use common function to check if floppies can be registered The same checks to see if a drive can be or is registered are repeated through the code, factor out the checks in a common function and replace the repeated checks with it. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 2c7257334b64..d54b234a1a67 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4109,12 +4109,19 @@ static struct platform_driver floppy_driver = { static struct platform_device floppy_device[N_DRIVE]; +static bool floppy_available(int drive) +{ + if (!(allowed_drive_mask & (1 << drive))) + return false; + if (fdc_state[FDC(drive)].version == FDC_NONE) + return false; + return true; +} + static struct kobject *floppy_find(dev_t dev, int *part, void *data) { int drive = (*part & 3) | ((*part & 0x80) >> 5); - if (drive >= N_DRIVE || - !(allowed_drive_mask & (1 << drive)) || - fdc_state[FDC(drive)].version == FDC_NONE) + if (drive >= N_DRIVE || !floppy_available(drive)) return NULL; if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type)) return NULL; @@ -4281,9 +4288,7 @@ static int __init do_floppy_init(void) } for (drive = 0; drive < N_DRIVE; drive++) { - if (!(allowed_drive_mask & (1 << drive))) - continue; - if (fdc_state[FDC(drive)].version == FDC_NONE) + if (!floppy_available(drive)) continue; floppy_device[drive].name = floppy_device_name; @@ -4312,8 +4317,7 @@ out_unreg_platform_dev: platform_device_unregister(&floppy_device[drive]); out_remove_drives: while (drive--) { - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); @@ -4558,8 +4562,7 @@ static void __exit floppy_module_exit(void) for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); - if ((allowed_drive_mask & (1 << drive)) && - fdc_state[FDC(drive)].version != FDC_NONE) { + if (floppy_available(drive)) { del_gendisk(disks[drive]); device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos); platform_device_unregister(&floppy_device[drive]); From 1a4ae43e4feb570901667782678772fd31c1b125 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 30 Oct 2012 08:36:07 +0100 Subject: [PATCH 066/174] floppy: remove dr, reuse drive on do_floppy_init This is a small cleanup, that also may turn error handling of unitialized disks more readable. We don't need a separate variable to track allocated disks, remove dr and reuse drive variable instead. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Jiri Kosina Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 48 +++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 26 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index d54b234a1a67..1c49d7173966 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4131,8 +4131,7 @@ static struct kobject *floppy_find(dev_t dev, int *part, void *data) static int __init do_floppy_init(void) { - int i, unit, drive; - int err, dr; + int i, unit, drive, err; set_debugt(); interruptjiffies = resultjiffies = jiffies; @@ -4148,29 +4147,28 @@ static int __init do_floppy_init(void) if (!floppy_wq) return -ENOMEM; - for (dr = 0; dr < N_DRIVE; dr++) { - disks[dr] = alloc_disk(1); - if (!disks[dr]) { + for (drive = 0; drive < N_DRIVE; drive++) { + disks[drive] = alloc_disk(1); + if (!disks[drive]) { err = -ENOMEM; goto out_put_disk; } - disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock); - if (!disks[dr]->queue) { - put_disk(disks[dr]); + disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock); + if (!disks[drive]->queue) { err = -ENOMEM; goto out_put_disk; } - blk_queue_max_hw_sectors(disks[dr]->queue, 64); - disks[dr]->major = FLOPPY_MAJOR; - disks[dr]->first_minor = TOMINOR(dr); - disks[dr]->fops = &floppy_fops; - sprintf(disks[dr]->disk_name, "fd%d", dr); + blk_queue_max_hw_sectors(disks[drive]->queue, 64); + disks[drive]->major = FLOPPY_MAJOR; + disks[drive]->first_minor = TOMINOR(drive); + disks[drive]->fops = &floppy_fops; + sprintf(disks[drive]->disk_name, "fd%d", drive); - init_timer(&motor_off_timer[dr]); - motor_off_timer[dr].data = dr; - motor_off_timer[dr].function = motor_off_callback; + init_timer(&motor_off_timer[drive]); + motor_off_timer[drive].data = drive; + motor_off_timer[drive].function = motor_off_callback; } err = register_blkdev(FLOPPY_MAJOR, "fd"); @@ -4332,17 +4330,15 @@ out_unreg_region: out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: - while (dr--) { - del_timer_sync(&motor_off_timer[dr]); - if (disks[dr]->queue) { - blk_cleanup_queue(disks[dr]->queue); - /* - * put_disk() is not paired with add_disk() and - * will put queue reference one extra time. fix it. - */ - disks[dr]->queue = NULL; + for (drive = 0; drive < N_DRIVE; drive++) { + if (!disks[drive]) + break; + if (disks[drive]->queue) { + del_timer_sync(&motor_off_timer[drive]); + blk_cleanup_queue(disks[drive]->queue); + disks[drive]->queue = NULL; } - put_disk(disks[dr]); + put_disk(disks[drive]); } destroy_workqueue(floppy_wq); return err; From dbd4713348b6b7e4ce707060d1b92a457ab2e5fb Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 4 Sep 2012 11:07:38 +0200 Subject: [PATCH 067/174] pktcdvd: update MAINTAINERS Peter is not going to maintain the driver any more. I have the hardware. Acked-by: Peter Osterlund Signed-off-by: Jiri Kosina --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 027ec2bfa135..17f2e1c2c7bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5633,7 +5633,7 @@ S: Maintained F: drivers/pinctrl/spear/ PKTCDVD DRIVER -M: Peter Osterlund +M: Jiri Kosina S: Maintained F: drivers/block/pktcdvd.c F: include/linux/pktcdvd.h From 654dbef2146d6bc56886495d44b661148f016e62 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 27 Aug 2012 12:28:57 +0800 Subject: [PATCH 068/174] xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index d0fed5582a42..f58434c2617c 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -105,11 +105,10 @@ static struct xen_blkif *xen_blkif_alloc(domid_t domid) { struct xen_blkif *blkif; - blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL); + blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL); if (!blkif) return ERR_PTR(-ENOMEM); - memset(blkif, 0, sizeof(*blkif)); blkif->domid = domid; spin_lock_init(&blkif->blk_ring_lock); atomic_set(&blkif->refcnt, 1); From 2541aa799ff711fdd85dfbced58ea815a5968674 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 9 Sep 2012 12:40:50 +0200 Subject: [PATCH 069/174] cciss: remove unneeded memset() The memory return by kzalloc() or kmem_cache_zalloc() has already be set to zero, so remove useless memset(0). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Cc: Mike Miller Cc: Jens Axboe Cc: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index b0f553b26d0f..ca83f96756ad 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -5205,7 +5205,6 @@ static void cciss_shutdown(struct pci_dev *pdev) return; } /* write all data in the battery backed cache to disk */ - memset(flush_buf, 0, 4); return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf, 4, 0, CTLR_LUNID, TYPE_CMD); kfree(flush_buf); From b7010ede4342d3ab9f9a0c51c1aa50139aacadaf Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 9 Sep 2012 12:47:47 +0200 Subject: [PATCH 070/174] cciss: select CONFIG_CHECK_SIGNATURE The patch cciss-use-check_signature.patch in -mm tree introduced a build error: drivers/built-in.o: In function `CISS_signature_present': drivers/block/cciss.c:4270: undefined reference to `check_signature' Add missing CONFIG_CHECK_SIGNATURE to fix this issue. Reported-by: Fengguang Wu Signed-off-by: Akinobu Mita Cc: Fengguang Wu Cc: Mike Miller Cc: Jens Axboe Acked-by: "Stephen M. Cameron" Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6983a65c8df3..824e09c4d0d7 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -131,6 +131,7 @@ config BLK_CPQ_DA config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" depends on PCI + select CHECK_SIGNATURE help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. From 1f999572f244f266c5b1b855025723541b0b475d Mon Sep 17 00:00:00 2001 From: Oliver Chick Date: Fri, 21 Sep 2012 10:04:18 +0100 Subject: [PATCH 071/174] xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool Changing the type of bdev parameters to be unsigned int :1, rather than bool. This is more consistent with the types of other features in the block drivers. Signed-off-by: Oliver Chick Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Jens Axboe --- drivers/block/xen-blkback/common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9ad3b5ec1dc1..9a54623e52d7 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -158,8 +158,8 @@ struct xen_vbd { struct block_device *bdev; /* Cached size parameter. */ sector_t size; - bool flush_support; - bool discard_secure; + unsigned int flush_support:1; + unsigned int discard_secure:1; }; struct backend_info; From 4453bc88f0f7be6d84b50b2e1c1ed239c45fb14a Mon Sep 17 00:00:00 2001 From: Selvan Mani Date: Thu, 27 Sep 2012 14:36:43 +0200 Subject: [PATCH 072/174] mtip32xx:Added appropriate timeout value for secure erase Added appropriate timeout value for secure erase based on identify device data Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 19 +++++++++++++++---- drivers/block/mtip32xx/mtip32xx.h | 3 +++ 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index f946d31d6917..adc6f36564cf 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2035,8 +2035,9 @@ static unsigned int implicit_sector(unsigned char command, } return rv; } - -static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) +static void mtip_set_timeout(struct driver_data *dd, + struct host_to_dev_fis *fis, + unsigned int *timeout, u8 erasemode) { switch (fis->command) { case ATA_CMD_DOWNLOAD_MICRO: @@ -2044,7 +2045,10 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) break; case ATA_CMD_SEC_ERASE_UNIT: case 0xFC: - *timeout = 240000; /* 4 minutes */ + if (erasemode) + *timeout = ((*(dd->port->identify + 90) * 2) * 60000); + else + *timeout = ((*(dd->port->identify + 89) * 2) * 60000); break; case ATA_CMD_STANDBYNOW1: *timeout = 120000; /* 2 minutes */ @@ -2087,6 +2091,7 @@ static int exec_drive_taskfile(struct driver_data *dd, unsigned int transfer_size; unsigned long task_file_data; int intotal = outtotal + req_task->out_size; + int erasemode = 0; taskout = req_task->out_size; taskin = req_task->in_size; @@ -2212,7 +2217,13 @@ static int exec_drive_taskfile(struct driver_data *dd, fis.lba_hi, fis.device); - mtip_set_timeout(&fis, &timeout); + /* check for erase mode support during secure erase.*/ + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) + && (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + erasemode = 1; + } + + mtip_set_timeout(dd, &fis, &timeout, erasemode); /* Determine the correct transfer size.*/ if (force_single_sector) diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 18627a1d04c5..5f4a917bd8bb 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -33,6 +33,9 @@ /* offset of Device Control register in PCIe extended capabilites space */ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 +/* check for erase mode support during secure erase */ +#define MTIP_SEC_ERASE_MODE 0x3 + /* # of times to retry timed out/failed IOs */ #define MTIP_MAX_RETRIES 2 From a1ecac3b0656a68259927c234e505804d33a7b83 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 28 Sep 2012 10:42:23 +0200 Subject: [PATCH 073/174] loop: Make explicit loop device destruction lazy xfstests has always had random failures of tests due to loop devices failing to be torn down and hence leaving filesytems that cannot be unmounted. This causes test runs to immediately stop. Over the past 6 or 7 years we've added hacks like explicit unmount -d commands for loop mounts, losetup -d after unmount -d fails, etc, but still the problems persist. Recently, the frequency of loop related failures increased again to the point that xfstests 259 will reliably fail with a stray loop device that was not torn down. That is despite the fact the test is above as simple as it gets - loop 5 or 6 times running mkfs.xfs with different paramters: lofile=$(losetup -f) losetup $lofile "$testfile" "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!" sync losetup -d $lofile And losteup -d $lofile is failing with EBUSY on 1-3 of these loops every time the test is run. Turns out that blkid is running simultaneously with losetup -d, and so it sees an elevated reference count and returns EBUSY. But why is blkid running? It's obvious, isn't it? udev has decided to try and find out what is on the block device as a result of a creation notification. And it is racing with mkfs, so might still be scanning the device when mkfs finishes and we try to tear it down. So, make losetup -d force autoremove behaviour. That is, when the last reference goes away, tear down the device. xfstests wants it *gone*, not causing random teardown failures when we know that all the operations the tests have specifically run on the device have completed and are no longer referencing the loop device. Signed-off-by: Dave Chinner Signed-off-by: Jens Axboe --- drivers/block/loop.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index e9d594fd12cb..54046e51160a 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -976,8 +976,21 @@ static int loop_clr_fd(struct loop_device *lo) if (lo->lo_state != Lo_bound) return -ENXIO; - if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */ - return -EBUSY; + /* + * If we've explicitly asked to tear down the loop device, + * and it has an elevated reference count, set it for auto-teardown when + * the last reference goes away. This stops $!~#$@ udev from + * preventing teardown because it decided that it needs to run blkid on + * the loopback device whenever they appear. xfstests is notorious for + * failing tests because blkid via udev races with a losetup + * /do something like mkfs/losetup -d causing the losetup -d + * command to fail with EBUSY. + */ + if (lo->lo_refcnt > 1) { + lo->lo_flags |= LO_FLAGS_AUTOCLEAR; + mutex_unlock(&lo->lo_ctl_mutex); + return 0; + } if (filp == NULL) return -EINVAL; From 9b0573c07f278e9888c352aa9724035c75784ea0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 15:07:34 +0200 Subject: [PATCH 074/174] ALSA: PCM: Fix some races at disconnection Fix races at PCM disconnection: - while a PCM device is being opened or closed - while the PCM state is being changed without lock in prepare, hw_params, hw_free ops Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai --- sound/core/pcm.c | 7 ++++++- sound/core/pcm_native.c | 16 ++++++++++++---- 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index f2991940b271..993b2405fdfe 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -1086,11 +1086,15 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) if (list_empty(&pcm->list)) goto unlock; + mutex_lock(&pcm->open_mutex); list_del_init(&pcm->list); for (cidx = 0; cidx < 2; cidx++) - for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) + for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) { + snd_pcm_stream_lock_irq(substream); if (substream->runtime) substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED; + snd_pcm_stream_unlock_irq(substream); + } list_for_each_entry(notify, &snd_pcm_notify_list, list) { notify->n_disconnect(pcm); } @@ -1110,6 +1114,7 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) pcm->streams[cidx].chmap_kctl = NULL; } } + mutex_unlock(&pcm->open_mutex); unlock: mutex_unlock(®ister_mutex); return 0; diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 5e12e5bacbba..8753c89f3290 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -369,6 +369,14 @@ static int period_to_usecs(struct snd_pcm_runtime *runtime) return usecs; } +static void snd_pcm_set_state(struct snd_pcm_substream *substream, int state) +{ + snd_pcm_stream_lock_irq(substream); + if (substream->runtime->status->state != SNDRV_PCM_STATE_DISCONNECTED) + substream->runtime->status->state = state; + snd_pcm_stream_unlock_irq(substream); +} + static int snd_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -452,7 +460,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, runtime->boundary *= 2; snd_pcm_timer_resolution_change(substream); - runtime->status->state = SNDRV_PCM_STATE_SETUP; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP); if (pm_qos_request_active(&substream->latency_pm_qos_req)) pm_qos_remove_request(&substream->latency_pm_qos_req); @@ -464,7 +472,7 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream, /* hardware might be unusable from this time, so we force application to retry to set the correct hardware parameter settings */ - runtime->status->state = SNDRV_PCM_STATE_OPEN; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); return err; @@ -512,7 +520,7 @@ static int snd_pcm_hw_free(struct snd_pcm_substream *substream) return -EBADFD; if (substream->ops->hw_free) result = substream->ops->hw_free(substream); - runtime->status->state = SNDRV_PCM_STATE_OPEN; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN); pm_qos_remove_request(&substream->latency_pm_qos_req); return result; } @@ -1320,7 +1328,7 @@ static void snd_pcm_post_prepare(struct snd_pcm_substream *substream, int state) { struct snd_pcm_runtime *runtime = substream->runtime; runtime->control->appl_ptr = runtime->status->hw_ptr; - runtime->status->state = SNDRV_PCM_STATE_PREPARED; + snd_pcm_set_state(substream, SNDRV_PCM_STATE_PREPARED); } static struct action_ops snd_pcm_action_prepare = { From 978520b75f0a1ce82b17e1e8186417250de6d545 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 15:12:55 +0200 Subject: [PATCH 075/174] ALSA: usb-audio: Fix races at disconnection Close some races at disconnection of a USB audio device by adding the chip->shutdown_mutex and chip->shutdown check at appropriate places. The spots to put bandaids are: - PCM prepare, hw_params and hw_free - where the usb device is accessed for communication or get speed, in mixer.c and others; the device speed is now cached in subs->speed instead of accessing to chip->dev The accesses in PCM open and close don't need the mutex protection because these are already handled in the core PCM disconnection code. The autosuspend/autoresume codes are still uncovered by this patch because of possible mutex deadlocks. They'll be covered by the upcoming change to rwsem. Also the mixer codes are untouched, too. These will be fixed in another patch, too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai --- sound/usb/card.h | 1 + sound/usb/mixer.c | 65 ++++++++++++++++++++++++++++++---------------- sound/usb/pcm.c | 49 ++++++++++++++++++++++------------ sound/usb/proc.c | 4 +-- sound/usb/stream.c | 1 + 5 files changed, 79 insertions(+), 41 deletions(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index afa4f9e9b27a..814cb357ff88 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -126,6 +126,7 @@ struct snd_usb_substream { struct snd_usb_endpoint *sync_endpoint; unsigned long flags; bool need_setup_ep; /* (re)configure EP at prepare? */ + unsigned int speed; /* USB_SPEED_XXX */ u64 formats; /* format bitmasks (all or'ed) */ unsigned int num_formats; /* number of supported audio formats (list) */ diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index fe56c9da38e9..c2ef11ccd66a 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -287,25 +287,32 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v unsigned char buf[2]; int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; int timeout = 10; - int err; + int idx = 0, err; err = snd_usb_autoresume(cval->mixer->chip); if (err < 0) return -EIO; + mutex_lock(&chip->shutdown_mutex); while (timeout-- > 0) { + if (chip->shutdown) + break; + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, val_len) >= val_len) { + validx, idx, buf, val_len) >= val_len) { *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); - snd_usb_autosuspend(cval->mixer->chip); - return 0; + err = 0; + goto out; } } - snd_usb_autosuspend(cval->mixer->chip); snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); - return -EINVAL; + request, validx, idx, cval->val_type); + err = -EINVAL; + + out: + mutex_unlock(&chip->shutdown_mutex); + snd_usb_autosuspend(cval->mixer->chip); + return err; } static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret) @@ -313,7 +320,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v struct snd_usb_audio *chip = cval->mixer->chip; unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */ unsigned char *val; - int ret, size; + int idx = 0, ret, size; __u8 bRequest; if (request == UAC_GET_CUR) { @@ -330,16 +337,22 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v if (ret) goto error; - ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest, + mutex_lock(&chip->shutdown_mutex); + if (chip->shutdown) + ret = -ENODEV; + else { + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); + ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, size); + validx, idx, buf, size); + } + mutex_unlock(&chip->shutdown_mutex); snd_usb_autosuspend(chip); if (ret < 0) { error: snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); + request, validx, idx, cval->val_type); return ret; } @@ -417,7 +430,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, { struct snd_usb_audio *chip = cval->mixer->chip; unsigned char buf[2]; - int val_len, err, timeout = 10; + int idx = 0, val_len, err, timeout = 10; if (cval->mixer->protocol == UAC_VERSION_1) { val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; @@ -440,19 +453,27 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = snd_usb_autoresume(chip); if (err < 0) return -EIO; - while (timeout-- > 0) + mutex_lock(&chip->shutdown_mutex); + while (timeout-- > 0) { + if (chip->shutdown) + break; + idx = snd_usb_ctrl_intf(chip) | (cval->id << 8); if (snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, - validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, val_len) >= 0) { - snd_usb_autosuspend(chip); - return 0; + validx, idx, buf, val_len) >= 0) { + err = 0; + goto out; } - snd_usb_autosuspend(chip); + } snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n", - request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]); - return -EINVAL; + request, validx, idx, cval->val_type, buf[0], buf[1]); + err = -EINVAL; + + out: + mutex_unlock(&chip->shutdown_mutex); + snd_usb_autosuspend(chip); + return err; } static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 55e19e1b80ec..55e741c5f231 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -71,6 +71,8 @@ static snd_pcm_uframes_t snd_usb_pcm_pointer(struct snd_pcm_substream *substream unsigned int hwptr_done; subs = (struct snd_usb_substream *)substream->runtime->private_data; + if (subs->stream->chip->shutdown) + return SNDRV_PCM_POS_XRUN; spin_lock(&subs->lock); hwptr_done = subs->hwptr_done; substream->runtime->delay = snd_usb_pcm_delay(subs, @@ -444,7 +446,6 @@ static int configure_endpoint(struct snd_usb_substream *subs) { int ret; - mutex_lock(&subs->stream->chip->shutdown_mutex); /* format changed */ stop_endpoints(subs, 0, 0, 0); ret = snd_usb_endpoint_set_params(subs->data_endpoint, @@ -455,7 +456,7 @@ static int configure_endpoint(struct snd_usb_substream *subs) subs->cur_audiofmt, subs->sync_endpoint); if (ret < 0) - goto unlock; + return ret; if (subs->sync_endpoint) ret = snd_usb_endpoint_set_params(subs->data_endpoint, @@ -465,9 +466,6 @@ static int configure_endpoint(struct snd_usb_substream *subs) subs->cur_rate, subs->cur_audiofmt, NULL); - -unlock: - mutex_unlock(&subs->stream->chip->shutdown_mutex); return ret; } @@ -505,7 +503,13 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - if ((ret = set_format(subs, fmt)) < 0) + mutex_lock(&subs->stream->chip->shutdown_mutex); + if (subs->stream->chip->shutdown) + ret = -ENODEV; + else + ret = set_format(subs, fmt); + mutex_unlock(&subs->stream->chip->shutdown_mutex); + if (ret < 0) return ret; subs->interface = fmt->iface; @@ -528,8 +532,10 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->cur_rate = 0; subs->period_bytes = 0; mutex_lock(&subs->stream->chip->shutdown_mutex); - stop_endpoints(subs, 0, 1, 1); - deactivate_endpoints(subs); + if (!subs->stream->chip->shutdown) { + stop_endpoints(subs, 0, 1, 1); + deactivate_endpoints(subs); + } mutex_unlock(&subs->stream->chip->shutdown_mutex); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -552,12 +558,19 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) return -ENXIO; } - if (snd_BUG_ON(!subs->data_endpoint)) - return -EIO; + mutex_lock(&subs->stream->chip->shutdown_mutex); + if (subs->stream->chip->shutdown) { + ret = -ENODEV; + goto unlock; + } + if (snd_BUG_ON(!subs->data_endpoint)) { + ret = -EIO; + goto unlock; + } ret = set_format(subs, subs->cur_audiofmt); if (ret < 0) - return ret; + goto unlock; iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface); alts = &iface->altsetting[subs->cur_audiofmt->altset_idx]; @@ -567,12 +580,12 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) subs->cur_audiofmt, subs->cur_rate); if (ret < 0) - return ret; + goto unlock; if (subs->need_setup_ep) { ret = configure_endpoint(subs); if (ret < 0) - return ret; + goto unlock; subs->need_setup_ep = false; } @@ -592,9 +605,11 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) /* for playback, submit the URBs now; otherwise, the first hwptr_done * updates for all URBs would happen at the same time when starting */ if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) - return start_endpoints(subs, 1); + ret = start_endpoints(subs, 1); - return 0; + unlock: + mutex_unlock(&subs->stream->chip->shutdown_mutex); + return ret; } static struct snd_pcm_hardware snd_usb_hardware = @@ -647,7 +662,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, return 0; } /* check whether the period time is >= the data packet interval */ - if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) { + if (subs->speed != USB_SPEED_FULL) { ptime = 125 * (1 << fp->datainterval); if (ptime > pt->max || (ptime == pt->max && pt->openmax)) { hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max); @@ -925,7 +940,7 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre return err; param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) + if (subs->speed == USB_SPEED_FULL) /* full speed devices have fixed data packet interval */ ptmin = 1000; if (ptmin == 1000) diff --git a/sound/usb/proc.c b/sound/usb/proc.c index ebc1a5b5b3f1..d218f763501f 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -108,7 +108,7 @@ static void proc_dump_substream_formats(struct snd_usb_substream *subs, struct s } snd_iprintf(buffer, "\n"); } - if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) + if (subs->speed != USB_SPEED_FULL) snd_iprintf(buffer, " Data packet interval: %d us\n", 125 * (1 << fp->datainterval)); // snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize); @@ -124,7 +124,7 @@ static void proc_dump_ep_status(struct snd_usb_substream *subs, return; snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize); snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n", - snd_usb_get_speed(subs->dev) == USB_SPEED_FULL + subs->speed == USB_SPEED_FULL ? get_full_speed_hz(ep->freqm) : get_high_speed_hz(ep->freqm), ep->freqm >> 16, ep->freqm & 0xffff); diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 083ed81160e5..1de0c8c002a8 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -90,6 +90,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as, subs->direction = stream; subs->dev = as->chip->dev; subs->txfr_quirk = as->chip->txfr_quirk; + subs->speed = snd_usb_get_speed(subs->dev); snd_usb_set_pcm_ops(as->pcm, stream); From 34f3c89fda4fba9fe689db22253ca8db2f5e6386 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Oct 2012 12:16:02 +0200 Subject: [PATCH 076/174] ALSA: usb-audio: Use rwsem for disconnect protection Replace mutex with rwsem for codec->shutdown protection so that concurrent accesses are allowed. Also add the protection to snd_usb_autosuspend() and snd_usb_autoresume(), too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai --- sound/usb/card.c | 12 ++++++++---- sound/usb/mixer.c | 12 ++++++------ sound/usb/pcm.c | 12 ++++++------ sound/usb/usbaudio.h | 2 +- 4 files changed, 21 insertions(+), 17 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 561bb74fd364..282f0fc9fed1 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -339,7 +339,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, } mutex_init(&chip->mutex); - mutex_init(&chip->shutdown_mutex); + init_rwsem(&chip->shutdown_rwsem); chip->index = idx; chip->dev = dev; chip->card = card; @@ -560,7 +560,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, card = chip->card; mutex_lock(®ister_mutex); - mutex_lock(&chip->shutdown_mutex); + down_write(&chip->shutdown_rwsem); chip->shutdown = 1; chip->num_interfaces--; if (chip->num_interfaces <= 0) { @@ -582,11 +582,11 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, snd_usb_mixer_disconnect(p); } usb_chip[chip->index] = NULL; - mutex_unlock(&chip->shutdown_mutex); + up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); snd_card_free_when_closed(card); } else { - mutex_unlock(&chip->shutdown_mutex); + up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); } } @@ -618,16 +618,20 @@ int snd_usb_autoresume(struct snd_usb_audio *chip) { int err = -ENODEV; + down_read(&chip->shutdown_rwsem); if (!chip->shutdown && !chip->probing) err = usb_autopm_get_interface(chip->pm_intf); + up_read(&chip->shutdown_rwsem); return err; } void snd_usb_autosuspend(struct snd_usb_audio *chip) { + down_read(&chip->shutdown_rwsem); if (!chip->shutdown && !chip->probing) usb_autopm_put_interface(chip->pm_intf); + up_read(&chip->shutdown_rwsem); } static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c2ef11ccd66a..298070e8f2d4 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -292,7 +292,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v err = snd_usb_autoresume(cval->mixer->chip); if (err < 0) return -EIO; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); while (timeout-- > 0) { if (chip->shutdown) break; @@ -310,7 +310,7 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v err = -EINVAL; out: - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(cval->mixer->chip); return err; } @@ -337,7 +337,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v if (ret) goto error; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); if (chip->shutdown) ret = -ENODEV; else { @@ -346,7 +346,7 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, idx, buf, size); } - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(chip); if (ret < 0) { @@ -453,7 +453,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = snd_usb_autoresume(chip); if (err < 0) return -EIO; - mutex_lock(&chip->shutdown_mutex); + down_read(&chip->shutdown_rwsem); while (timeout-- > 0) { if (chip->shutdown) break; @@ -471,7 +471,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, err = -EINVAL; out: - mutex_unlock(&chip->shutdown_mutex); + up_read(&chip->shutdown_rwsem); snd_usb_autosuspend(chip); return err; } diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 55e741c5f231..37428f74dbb6 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -503,12 +503,12 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (subs->stream->chip->shutdown) ret = -ENODEV; else ret = set_format(subs, fmt); - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); if (ret < 0) return ret; @@ -531,12 +531,12 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->cur_audiofmt = NULL; subs->cur_rate = 0; subs->period_bytes = 0; - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (!subs->stream->chip->shutdown) { stop_endpoints(subs, 0, 1, 1); deactivate_endpoints(subs); } - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -558,7 +558,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) return -ENXIO; } - mutex_lock(&subs->stream->chip->shutdown_mutex); + down_read(&subs->stream->chip->shutdown_rwsem); if (subs->stream->chip->shutdown) { ret = -ENODEV; goto unlock; @@ -608,7 +608,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream) ret = start_endpoints(subs, 1); unlock: - mutex_unlock(&subs->stream->chip->shutdown_mutex); + up_read(&subs->stream->chip->shutdown_rwsem); return ret; } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index b8233ebe250f..ef42797f56fb 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -37,7 +37,7 @@ struct snd_usb_audio { struct usb_interface *pm_intf; u32 usb_id; struct mutex mutex; - struct mutex shutdown_mutex; + struct rw_semaphore shutdown_rwsem; unsigned int shutdown:1; unsigned int probing:1; unsigned int autosuspended:1; From 888ea7d5ac6815ba16b3b3a20f665a92c7af6724 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 15 Oct 2012 12:40:37 +0200 Subject: [PATCH 077/174] ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c Similar like the previous commit, cover with chip->shutdown_rwsem and chip->shutdown checks. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 58 +++++++++++++++++++++++++++++++++++----- 1 file changed, 51 insertions(+), 7 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 690000db0ec0..ae2b71435220 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -283,6 +283,11 @@ static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e if (value > 1) return -EINVAL; changed = value != mixer->audigy2nx_leds[index]; + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) { + err = -ENODEV; + goto out; + } if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042)) err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), 0x24, @@ -299,6 +304,8 @@ static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e usb_sndctrlpipe(mixer->chip->dev, 0), 0x24, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, value, index + 2, NULL, 0); + out: + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; mixer->audigy2nx_leds[index] = value; @@ -392,11 +399,16 @@ static void snd_audigy2nx_proc_read(struct snd_info_entry *entry, for (i = 0; jacks[i].name; ++i) { snd_iprintf(buffer, "%s: ", jacks[i].name); - err = snd_usb_ctl_msg(mixer->chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = 0; + else + err = snd_usb_ctl_msg(mixer->chip->dev, usb_rcvctrlpipe(mixer->chip->dev, 0), UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, jacks[i].unitid << 8, buf, 3); + up_read(&mixer->chip->shutdown_rwsem); if (err == 3 && (buf[0] == 3 || buf[0] == 6)) snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]); else @@ -426,10 +438,15 @@ static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol, else new_status = old_status & ~0x02; changed = new_status != old_status; - err = snd_usb_ctl_msg(mixer->chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), 0x08, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, 50, 0, &new_status, 1); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; mixer->xonar_u1_status = new_status; @@ -468,11 +485,17 @@ static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol, u8 bRequest = (kcontrol->private_value >> 16) & 0xff; u16 wIndex = kcontrol->private_value & 0xffff; u8 tmp; + int ret; - int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + ret = -ENODEV; + else + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0, cpu_to_le16(wIndex), &tmp, sizeof(tmp), 1000); + up_read(&mixer->chip->shutdown_rwsem); if (ret < 0) { snd_printk(KERN_ERR @@ -493,11 +516,17 @@ static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol, u8 bRequest = (kcontrol->private_value >> 16) & 0xff; u16 wIndex = kcontrol->private_value & 0xffff; u16 wValue = ucontrol->value.integer.value[0]; + int ret; - int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + ret = -ENODEV; + else + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, cpu_to_le16(wValue), cpu_to_le16(wIndex), NULL, 0, 1000); + up_read(&mixer->chip->shutdown_rwsem); if (ret < 0) { snd_printk(KERN_ERR @@ -656,11 +685,16 @@ static int snd_ftu_eff_switch_get(struct snd_kcontrol *kctl, return -EINVAL; - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; @@ -703,11 +737,16 @@ static int snd_ftu_eff_switch_put(struct snd_kcontrol *kctl, if (!pval->is_cached) { /* Read current value */ - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; @@ -719,11 +758,16 @@ static int snd_ftu_eff_switch_put(struct snd_kcontrol *kctl, if (cur_val != new_val) { value[0] = new_val; value[1] = 0; - err = snd_usb_ctl_msg(chip->dev, + down_read(&mixer->chip->shutdown_rwsem); + if (mixer->chip->shutdown) + err = -ENODEV; + else + err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, validx << 8, snd_usb_ctrl_intf(chip) | (id << 8), value, val_len); + up_read(&mixer->chip->shutdown_rwsem); if (err < 0) return err; From a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 13:05:59 +0200 Subject: [PATCH 078/174] ALSA: Add a reference counter to card instance For more strict protection for wild disconnections, a refcount is introduced to the card instance, and let it up/down when an object is referred via snd_lookup_*() in the open ops. The free-after-last-close check is also changed to check this refcount instead of the empty list, too. Reported-by: Matthieu CASTET Cc: Signed-off-by: Takashi Iwai --- include/sound/core.h | 3 +++ sound/core/compress_offload.c | 9 +++++-- sound/core/control.c | 3 +++ sound/core/hwdep.c | 5 +++- sound/core/init.c | 50 +++++++++++++++++++++-------------- sound/core/oss/mixer_oss.c | 10 +++++-- sound/core/oss/pcm_oss.c | 2 ++ sound/core/pcm_native.c | 9 +++++-- sound/core/rawmidi.c | 6 ++++- sound/core/sound.c | 11 ++++++-- sound/core/sound_oss.c | 10 +++++-- 11 files changed, 86 insertions(+), 32 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index bc056687f647..93896ad1fcdd 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -132,6 +132,7 @@ struct snd_card { int shutdown; /* this card is going down */ int free_on_last_close; /* free in context of file_release */ wait_queue_head_t shutdown_sleep; + atomic_t refcount; /* refcount for disconnection */ struct device *dev; /* device assigned to this card */ struct device *card_dev; /* cardX object for sysfs */ @@ -189,6 +190,7 @@ struct snd_minor { const struct file_operations *f_ops; /* file operations */ void *private_data; /* private data for f_ops->open */ struct device *dev; /* device for sysfs */ + struct snd_card *card_ptr; /* assigned card instance */ }; /* return a device pointer linked to each sound device as a parent */ @@ -295,6 +297,7 @@ int snd_card_info_done(void); int snd_component_add(struct snd_card *card, const char *component); int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); +void snd_card_unref(struct snd_card *card); #define snd_card_set_dev(card, devptr) ((card)->dev = (devptr)) diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index c40ae573346d..ad11dc994792 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -100,12 +100,15 @@ static int snd_compr_open(struct inode *inode, struct file *f) if (dirn != compr->direction) { pr_err("this device doesn't support this direction\n"); + snd_card_unref(compr->card); return -EINVAL; } data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) + if (!data) { + snd_card_unref(compr->card); return -ENOMEM; + } data->stream.ops = compr->ops; data->stream.direction = dirn; data->stream.private_data = compr->private_data; @@ -113,6 +116,7 @@ static int snd_compr_open(struct inode *inode, struct file *f) runtime = kzalloc(sizeof(*runtime), GFP_KERNEL); if (!runtime) { kfree(data); + snd_card_unref(compr->card); return -ENOMEM; } runtime->state = SNDRV_PCM_STATE_OPEN; @@ -126,7 +130,8 @@ static int snd_compr_open(struct inode *inode, struct file *f) kfree(runtime); kfree(data); } - return ret; + snd_card_unref(compr->card); + return 0; } static int snd_compr_free(struct inode *inode, struct file *f) diff --git a/sound/core/control.c b/sound/core/control.c index 7e86a5b9f3b5..9768a3963c8f 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -86,6 +86,7 @@ static int snd_ctl_open(struct inode *inode, struct file *file) write_lock_irqsave(&card->ctl_files_rwlock, flags); list_add_tail(&ctl->list, &card->ctl_files); write_unlock_irqrestore(&card->ctl_files_rwlock, flags); + snd_card_unref(card); return 0; __error: @@ -93,6 +94,8 @@ static int snd_ctl_open(struct inode *inode, struct file *file) __error2: snd_card_file_remove(card, file); __error1: + if (card) + snd_card_unref(card); return err; } diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 75ea16f35b1a..53a6ba5ad615 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -100,8 +100,10 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) if (hw == NULL) return -ENODEV; - if (!try_module_get(hw->card->module)) + if (!try_module_get(hw->card->module)) { + snd_card_unref(hw->card); return -EFAULT; + } init_waitqueue_entry(&wait, current); add_wait_queue(&hw->open_wait, &wait); @@ -148,6 +150,7 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) mutex_unlock(&hw->open_mutex); if (err < 0) module_put(hw->card->module); + snd_card_unref(hw->card); return err; } diff --git a/sound/core/init.c b/sound/core/init.c index d8ec849af128..7b012d15c2cf 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -213,6 +213,7 @@ int snd_card_create(int idx, const char *xid, spin_lock_init(&card->files_lock); INIT_LIST_HEAD(&card->files_list); init_waitqueue_head(&card->shutdown_sleep); + atomic_set(&card->refcount, 0); #ifdef CONFIG_PM mutex_init(&card->power_lock); init_waitqueue_head(&card->power_sleep); @@ -446,21 +447,36 @@ static int snd_card_do_free(struct snd_card *card) return 0; } +/** + * snd_card_unref - release the reference counter + * @card: the card instance + * + * Decrements the reference counter. When it reaches to zero, wake up + * the sleeper and call the destructor if needed. + */ +void snd_card_unref(struct snd_card *card) +{ + if (atomic_dec_and_test(&card->refcount)) { + wake_up(&card->shutdown_sleep); + if (card->free_on_last_close) + snd_card_do_free(card); + } +} +EXPORT_SYMBOL(snd_card_unref); + int snd_card_free_when_closed(struct snd_card *card) { - int free_now = 0; - int ret = snd_card_disconnect(card); - if (ret) + int ret; + + atomic_inc(&card->refcount); + ret = snd_card_disconnect(card); + if (ret) { + atomic_dec(&card->refcount); return ret; + } - spin_lock(&card->files_lock); - if (list_empty(&card->files_list)) - free_now = 1; - else - card->free_on_last_close = 1; - spin_unlock(&card->files_lock); - - if (free_now) + card->free_on_last_close = 1; + if (atomic_dec_and_test(&card->refcount)) snd_card_do_free(card); return 0; } @@ -474,7 +490,7 @@ int snd_card_free(struct snd_card *card) return ret; /* wait, until all devices are ready for the free operation */ - wait_event(card->shutdown_sleep, list_empty(&card->files_list)); + wait_event(card->shutdown_sleep, !atomic_read(&card->refcount)); snd_card_do_free(card); return 0; } @@ -886,6 +902,7 @@ int snd_card_file_add(struct snd_card *card, struct file *file) return -ENODEV; } list_add(&mfile->list, &card->files_list); + atomic_inc(&card->refcount); spin_unlock(&card->files_lock); return 0; } @@ -908,7 +925,6 @@ EXPORT_SYMBOL(snd_card_file_add); int snd_card_file_remove(struct snd_card *card, struct file *file) { struct snd_monitor_file *mfile, *found = NULL; - int last_close = 0; spin_lock(&card->files_lock); list_for_each_entry(mfile, &card->files_list, list) { @@ -923,19 +939,13 @@ int snd_card_file_remove(struct snd_card *card, struct file *file) break; } } - if (list_empty(&card->files_list)) - last_close = 1; spin_unlock(&card->files_lock); - if (last_close) { - wake_up(&card->shutdown_sleep); - if (card->free_on_last_close) - snd_card_do_free(card); - } if (!found) { snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file); return -ENOENT; } kfree(found); + snd_card_unref(card); return 0; } diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c index 29f6ded02555..a9a2e63c0222 100644 --- a/sound/core/oss/mixer_oss.c +++ b/sound/core/oss/mixer_oss.c @@ -52,14 +52,19 @@ static int snd_mixer_oss_open(struct inode *inode, struct file *file) SNDRV_OSS_DEVICE_TYPE_MIXER); if (card == NULL) return -ENODEV; - if (card->mixer_oss == NULL) + if (card->mixer_oss == NULL) { + snd_card_unref(card); return -ENODEV; + } err = snd_card_file_add(card, file); - if (err < 0) + if (err < 0) { + snd_card_unref(card); return err; + } fmixer = kzalloc(sizeof(*fmixer), GFP_KERNEL); if (fmixer == NULL) { snd_card_file_remove(card, file); + snd_card_unref(card); return -ENOMEM; } fmixer->card = card; @@ -68,6 +73,7 @@ static int snd_mixer_oss_open(struct inode *inode, struct file *file) if (!try_module_get(card->module)) { kfree(fmixer); snd_card_file_remove(card, file); + snd_card_unref(card); return -EFAULT; } return 0; diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 08fde0060fd9..2529e01538e9 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -2457,6 +2457,8 @@ static int snd_pcm_oss_open(struct inode *inode, struct file *file) __error2: snd_card_file_remove(pcm->card, file); __error1: + if (pcm) + snd_card_unref(pcm->card); return err; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 8753c89f3290..48c6a70ad69e 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1642,6 +1642,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) write_unlock_irq(&snd_pcm_link_rwlock); up_write(&snd_pcm_link_rwsem); _nolock: + snd_card_unref(substream1->pcm->card); fput_light(file, fput_needed); if (res < 0) kfree(group); @@ -2116,7 +2117,9 @@ static int snd_pcm_playback_open(struct inode *inode, struct file *file) return err; pcm = snd_lookup_minor_data(iminor(inode), SNDRV_DEVICE_TYPE_PCM_PLAYBACK); - return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK); + err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK); + snd_card_unref(pcm->card); + return err; } static int snd_pcm_capture_open(struct inode *inode, struct file *file) @@ -2127,7 +2130,9 @@ static int snd_pcm_capture_open(struct inode *inode, struct file *file) return err; pcm = snd_lookup_minor_data(iminor(inode), SNDRV_DEVICE_TYPE_PCM_CAPTURE); - return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE); + err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE); + snd_card_unref(pcm->card); + return err; } static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index ebf6e49ad3d4..7d4f62ab6711 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -379,8 +379,10 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) if (rmidi == NULL) return -ENODEV; - if (!try_module_get(rmidi->card->module)) + if (!try_module_get(rmidi->card->module)) { + snd_card_unref(rmidi->card); return -ENXIO; + } mutex_lock(&rmidi->open_mutex); card = rmidi->card; @@ -440,6 +442,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) #endif file->private_data = rawmidi_file; mutex_unlock(&rmidi->open_mutex); + snd_card_unref(rmidi->card); return 0; __error: @@ -447,6 +450,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) __error_card: mutex_unlock(&rmidi->open_mutex); module_put(rmidi->card->module); + snd_card_unref(rmidi->card); return err; } diff --git a/sound/core/sound.c b/sound/core/sound.c index 643976000ce8..89780c323f19 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -98,6 +98,10 @@ static void snd_request_other(int minor) * * Checks that a minor device with the specified type is registered, and returns * its user data pointer. + * + * This function increments the reference counter of the card instance + * if an associated instance with the given minor number and type is found. + * The caller must call snd_card_unref() appropriately later. */ void *snd_lookup_minor_data(unsigned int minor, int type) { @@ -108,9 +112,11 @@ void *snd_lookup_minor_data(unsigned int minor, int type) return NULL; mutex_lock(&sound_mutex); mreg = snd_minors[minor]; - if (mreg && mreg->type == type) + if (mreg && mreg->type == type) { private_data = mreg->private_data; - else + if (mreg->card_ptr) + atomic_inc(&mreg->card_ptr->refcount); + } else private_data = NULL; mutex_unlock(&sound_mutex); return private_data; @@ -275,6 +281,7 @@ int snd_register_device_for_dev(int type, struct snd_card *card, int dev, preg->device = dev; preg->f_ops = f_ops; preg->private_data = private_data; + preg->card_ptr = card; mutex_lock(&sound_mutex); #ifdef CONFIG_SND_DYNAMIC_MINORS minor = snd_find_free_minor(type); diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index e9528333e36d..e1d79ee35906 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -40,6 +40,9 @@ static struct snd_minor *snd_oss_minors[SNDRV_OSS_MINORS]; static DEFINE_MUTEX(sound_oss_mutex); +/* NOTE: This function increments the refcount of the associated card like + * snd_lookup_minor_data(); the caller must call snd_card_unref() appropriately + */ void *snd_lookup_oss_minor_data(unsigned int minor, int type) { struct snd_minor *mreg; @@ -49,9 +52,11 @@ void *snd_lookup_oss_minor_data(unsigned int minor, int type) return NULL; mutex_lock(&sound_oss_mutex); mreg = snd_oss_minors[minor]; - if (mreg && mreg->type == type) + if (mreg && mreg->type == type) { private_data = mreg->private_data; - else + if (mreg->card_ptr) + atomic_inc(&mreg->card_ptr->refcount); + } else private_data = NULL; mutex_unlock(&sound_oss_mutex); return private_data; @@ -123,6 +128,7 @@ int snd_register_oss_device(int type, struct snd_card *card, int dev, preg->device = dev; preg->f_ops = f_ops; preg->private_data = private_data; + preg->card_ptr = card; mutex_lock(&sound_oss_mutex); snd_oss_minors[minor] = preg; minor_unit = SNDRV_MINOR_OSS_DEVICE(minor); From 0914f7961babbf28aaa2f19b453951fb4841c03f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 16:43:39 +0200 Subject: [PATCH 079/174] ALSA: Avoid endless sleep after disconnect When disconnect callback is called, each component should wake up sleepers and check card->shutdown flag for avoiding the endless sleep blocking the proper resource release. Cc: Signed-off-by: Takashi Iwai --- sound/core/control.c | 2 ++ sound/core/hwdep.c | 7 +++++++ sound/core/oss/pcm_oss.c | 4 ++++ sound/core/pcm.c | 6 +++++- sound/core/pcm_native.c | 8 ++++++++ sound/core/rawmidi.c | 20 ++++++++++++++++++++ 6 files changed, 46 insertions(+), 1 deletion(-) diff --git a/sound/core/control.c b/sound/core/control.c index 9768a3963c8f..8c7c2c9bba61 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -1437,6 +1437,8 @@ static ssize_t snd_ctl_read(struct file *file, char __user *buffer, spin_unlock_irq(&ctl->read_lock); schedule(); remove_wait_queue(&ctl->change_sleep, &wait); + if (ctl->card->shutdown) + return -ENODEV; if (signal_pending(current)) return -ERESTARTSYS; spin_lock_irq(&ctl->read_lock); diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 53a6ba5ad615..3f7f6628cf7b 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -131,6 +131,10 @@ static int snd_hwdep_open(struct inode *inode, struct file * file) mutex_unlock(&hw->open_mutex); schedule(); mutex_lock(&hw->open_mutex); + if (hw->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; @@ -462,12 +466,15 @@ static int snd_hwdep_dev_disconnect(struct snd_device *device) mutex_unlock(®ister_mutex); return -EINVAL; } + mutex_lock(&hwdep->open_mutex); + wake_up(&hwdep->open_wait); #ifdef CONFIG_SND_OSSEMUL if (hwdep->ossreg) snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device); #endif snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device); list_del_init(&hwdep->list); + mutex_unlock(&hwdep->open_mutex); mutex_unlock(®ister_mutex); return 0; } diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 2529e01538e9..f337b66a020b 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -2441,6 +2441,10 @@ static int snd_pcm_oss_open(struct inode *inode, struct file *file) mutex_unlock(&pcm->open_mutex); schedule(); mutex_lock(&pcm->open_mutex); + if (pcm->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 993b2405fdfe..030102caeee9 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -1087,12 +1087,16 @@ static int snd_pcm_dev_disconnect(struct snd_device *device) goto unlock; mutex_lock(&pcm->open_mutex); + wake_up(&pcm->open_wait); list_del_init(&pcm->list); for (cidx = 0; cidx < 2; cidx++) for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) { snd_pcm_stream_lock_irq(substream); - if (substream->runtime) + if (substream->runtime) { substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED; + wake_up(&substream->runtime->sleep); + wake_up(&substream->runtime->tsleep); + } snd_pcm_stream_unlock_irq(substream); } list_for_each_entry(notify, &snd_pcm_notify_list, list) { diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 48c6a70ad69e..6e8872de5ba0 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1518,6 +1518,10 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, down_read(&snd_pcm_link_rwsem); snd_pcm_stream_lock_irq(substream); remove_wait_queue(&to_check->sleep, &wait); + if (card->shutdown) { + result = -ENODEV; + break; + } if (tout == 0) { if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) result = -ESTRPIPE; @@ -2169,6 +2173,10 @@ static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream) mutex_unlock(&pcm->open_mutex); schedule(); mutex_lock(&pcm->open_mutex); + if (pcm->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 7d4f62ab6711..1bb95aeea084 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -424,6 +424,10 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) mutex_unlock(&rmidi->open_mutex); schedule(); mutex_lock(&rmidi->open_mutex); + if (rmidi->card->shutdown) { + err = -ENODEV; + break; + } if (signal_pending(current)) { err = -ERESTARTSYS; break; @@ -995,6 +999,8 @@ static ssize_t snd_rawmidi_read(struct file *file, char __user *buf, size_t coun spin_unlock_irq(&runtime->lock); schedule(); remove_wait_queue(&runtime->sleep, &wait); + if (rfile->rmidi->card->shutdown) + return -ENODEV; if (signal_pending(current)) return result > 0 ? result : -ERESTARTSYS; if (!runtime->avail) @@ -1238,6 +1244,8 @@ static ssize_t snd_rawmidi_write(struct file *file, const char __user *buf, spin_unlock_irq(&runtime->lock); timeout = schedule_timeout(30 * HZ); remove_wait_queue(&runtime->sleep, &wait); + if (rfile->rmidi->card->shutdown) + return -ENODEV; if (signal_pending(current)) return result > 0 ? result : -ERESTARTSYS; if (!runtime->avail && !timeout) @@ -1613,9 +1621,20 @@ static int snd_rawmidi_dev_register(struct snd_device *device) static int snd_rawmidi_dev_disconnect(struct snd_device *device) { struct snd_rawmidi *rmidi = device->device_data; + int dir; mutex_lock(®ister_mutex); + mutex_lock(&rmidi->open_mutex); + wake_up(&rmidi->open_wait); list_del_init(&rmidi->list); + for (dir = 0; dir < 2; dir++) { + struct snd_rawmidi_substream *s; + list_for_each_entry(s, &rmidi->streams[dir].substreams, list) { + if (s->runtime) + wake_up(&s->runtime->sleep); + } + } + #ifdef CONFIG_SND_OSSEMUL if (rmidi->ossreg) { if ((int)rmidi->device == midi_map[rmidi->card->number]) { @@ -1630,6 +1649,7 @@ static int snd_rawmidi_dev_disconnect(struct snd_device *device) } #endif /* CONFIG_SND_OSSEMUL */ snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device); + mutex_unlock(&rmidi->open_mutex); mutex_unlock(®ister_mutex); return 0; } From b6514633bdc6a511f7c44b3ecb86d6071374239d Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 25 Oct 2012 11:00:24 +0200 Subject: [PATCH 080/174] x86: remove obsolete comment from asm/xen/hypervisor.h Signed-off-by: Olaf Hering Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/hypervisor.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h index 66d0fff1ee84..125f344f06a9 100644 --- a/arch/x86/include/asm/xen/hypervisor.h +++ b/arch/x86/include/asm/xen/hypervisor.h @@ -33,7 +33,6 @@ #ifndef _ASM_X86_XEN_HYPERVISOR_H #define _ASM_X86_XEN_HYPERVISOR_H -/* arch/i386/kernel/setup.c */ extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; From a67baeb77375199bbd842fa308cb565164dd1f19 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 24 Oct 2012 12:39:02 +0100 Subject: [PATCH 081/174] xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF map->kmap_ops allocated in gntdev_alloc_map() wasn't freed by gntdev_put_map(). Add a gntdev_free_map() helper function to free everything allocated by gntdev_alloc_map(). Signed-off-by: David Vrabel Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 610bfc6be177..2e22df2f7a3f 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -105,6 +105,21 @@ static void gntdev_print_maps(struct gntdev_priv *priv, #endif } +static void gntdev_free_map(struct grant_map *map) +{ + if (map == NULL) + return; + + if (map->pages) + free_xenballooned_pages(map->count, map->pages); + kfree(map->pages); + kfree(map->grants); + kfree(map->map_ops); + kfree(map->unmap_ops); + kfree(map->kmap_ops); + kfree(map); +} + static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) { struct grant_map *add; @@ -142,12 +157,7 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) return add; err: - kfree(add->pages); - kfree(add->grants); - kfree(add->map_ops); - kfree(add->unmap_ops); - kfree(add->kmap_ops); - kfree(add); + gntdev_free_map(add); return NULL; } @@ -198,17 +208,9 @@ static void gntdev_put_map(struct grant_map *map) evtchn_put(map->notify.event); } - if (map->pages) { - if (!use_ptemod) - unmap_grant_pages(map, 0, map->count); - - free_xenballooned_pages(map->count, map->pages); - } - kfree(map->pages); - kfree(map->grants); - kfree(map->map_ops); - kfree(map->unmap_ops); - kfree(map); + if (map->pages && !use_ptemod) + unmap_grant_pages(map, 0, map->count); + gntdev_free_map(map); } /* ------------------------------------------------------------------ */ From 01bc825f6311ba2878ae353418eee575d3051594 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:37 +0100 Subject: [PATCH 082/174] xen-fbfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Florian Tobias Schandinat Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/video/xen-fbfront.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index b7f5173ff9e9..917bb5681684 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -641,7 +641,6 @@ static void xenfb_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -670,6 +669,10 @@ InitWait: info->feature_resize = val; break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; From 2ebb939ab9c6a2484866c5eae4184c83c2b21af8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 18 Oct 2012 11:03:38 +0100 Subject: [PATCH 083/174] xen-kbdfront: handle backend CLOSED without CLOSING Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Dmitry Torokhov Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/input/misc/xen-kbdfront.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 02ca8680ea5b..6f7d99013031 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -311,7 +311,6 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -350,6 +349,10 @@ InitWait: break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; From 1bcaba51eba549748917f7d6eb41900ff9ee3d5f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 17 Oct 2012 13:14:09 -0400 Subject: [PATCH 084/174] xen/xenbus: fix overflow check in xenbus_file_write() Acked-by: Ian Campbell Reported-by: Dan Carpenter Signed-off-by: Jan Beulich [v1: Rebased on upstream] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_dev_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index 89f76252a16f..ac727028e658 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -458,7 +458,7 @@ static ssize_t xenbus_file_write(struct file *filp, goto out; /* Can't write a xenbus message larger we can buffer */ - if ((len + u->len) > sizeof(u->u.buffer)) { + if (len > sizeof(u->u.buffer) - u->len) { /* On error, dump existing buffer */ u->len = 0; rc = -EINVAL; From c8d258a7b2b6633b79cad4464e8dfb3dc328d897 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 24 Oct 2012 16:26:08 +0100 Subject: [PATCH 085/174] xen/arm: use the __HVC macro Use the new __HVC macro in hypercall.S. Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- arch/arm/xen/hypercall.S | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed101b9..71f723984cbd 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include #include +#include #include -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); From bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 25 Oct 2012 09:51:39 +0200 Subject: [PATCH 086/174] rt2800: validate step value for temperature compensation Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 01dc8891070c..59474ae0aec0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2449,7 +2449,7 @@ static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) /* * Check if temperature compensation is supported. */ - if (tssi_bounds[4] == 0xff) + if (tssi_bounds[4] == 0xff || step == 0xff) return 0; /* From 6fe7cc71bbf3a0bc28c9cec3c00bc11e81344412 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 29 Oct 2012 13:25:20 +0100 Subject: [PATCH 087/174] ath9k: Test for TID only in BlockAcks while checking tx status The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Cc: stable@vger.kernel.org Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 1ffca7511fa8..741918a2027b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -394,7 +394,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first; u32 ba[WME_BA_BMP_SIZE >> 5]; int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0; - bool rc_update = true; + bool rc_update = true, isba; struct ieee80211_tx_rate rates[4]; struct ath_frame_info *fi; int nframes; @@ -438,13 +438,17 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK; tid = ATH_AN_2_TID(an, tidno); seq_first = tid->seq_start; + isba = ts->ts_flags & ATH9K_TX_BA; /* * The hardware occasionally sends a tx status for the wrong TID. * In this case, the BA status cannot be considered valid and all * subframes need to be retransmitted + * + * Only BlockAcks have a TID and therefore normal Acks cannot be + * checked */ - if (tidno != ts->tid) + if (isba && tidno != ts->tid) txok = false; isaggr = bf_isaggr(bf); From 8fcff5f13773aa3898df1d13a1615d468079cb15 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 27 Oct 2012 15:28:58 +0200 Subject: [PATCH 088/174] GPIO: mvebu-gpio: Don't initialize the mask_cache Due to the SMP nature of some of the chips, which have per CPU registers, the driver does not use the generic irq_gc_mask_set_bit() & irq_gc_mask_clr_bit() functions, which only support a single register. The driver has its own implementation of these functions, which can pick the correct register depending on the CPU being used. The functions do however use the gc->mask_cache value. The call to irq_setup_generic_chip() was passing IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be initialized to the contents of some random register. This resulted in unexpected interrupts been delivered from random GPIO lines. Signed-off-by: Andrew Lunn Tested-by: Jamie Lentin Acked-by: Thomas Petazzoni Tested-by: Michael Walle Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 1bb43e3f9a61..fec421fe59b2 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -643,7 +643,7 @@ static int __devinit mvebu_gpio_probe(struct platform_device *pdev) ct->handler = handle_edge_irq; ct->chip.name = mvchip->chip.label; - irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE, + irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); /* Setup irq domain on top of the generic chip. */ From 02b898f2f04e418094f0093a3ad0b415bcdbe8eb Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 31 Oct 2012 11:42:03 +1100 Subject: [PATCH 089/174] md/raid1: Fix assembling of arrays containing Replacements. setup_conf in raid1.c uses conf->raid_disks before assigning a value. It is used when including 'Replacement' devices. The consequence is that assembling an array which contains a replacement will misbehave and either not include the replacement, or not include the device being replaced. Though this doesn't lead directly to data corruption, it could lead to reduced data safety. So use mddev->raid_disks, which is initialised, instead. Bug was introduced by commit c19d57980b38a5bb613a898937a1cf85f422fb9b md/raid1: recognise replacements when assembling arrays. in 3.3, so fix is suitable for 3.3.y thru 3.6.y. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 8034fbd6190c..636bae0405e8 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2710,7 +2710,7 @@ static struct r1conf *setup_conf(struct mddev *mddev) || disk_idx < 0) continue; if (test_bit(Replacement, &rdev->flags)) - disk = conf->mirrors + conf->raid_disks + disk_idx; + disk = conf->mirrors + mddev->raid_disks + disk_idx; else disk = conf->mirrors + disk_idx; From ed30be077e705e0dff53bfc51d23feb8aeeab78f Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Wed, 31 Oct 2012 11:42:30 +1100 Subject: [PATCH 090/174] MD RAID10: Fix oops when creating RAID10 arrays via dm-raid.c Commit 2863b9eb didn't take into account the changes to add TRIM support to RAID10 (commit 532a2a3fb). That is, when using dm-raid.c to create the RAID10 arrays, there is no mddev->gendisk or mddev->queue. The code added to support TRIM simply assumes that mddev->queue is available without checking. The result is an oops any time dm-raid.c attempts to create a RAID10 device. Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown --- drivers/md/raid10.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 906ccbd0f7dc..d1295aff4173 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1783,7 +1783,7 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev) clear_bit(Unmerged, &rdev->flags); } md_integrity_add_rdev(rdev, mddev); - if (blk_queue_discard(bdev_get_queue(rdev->bdev))) + if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev))) queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); print_conf(conf); @@ -3613,11 +3613,14 @@ static int run(struct mddev *mddev) discard_supported = true; } - if (discard_supported) - queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - else - queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue); - + if (mddev->queue) { + if (discard_supported) + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + else + queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, + mddev->queue); + } /* need to check that every block has at least one working mirror */ if (!enough(conf, -1)) { printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n", From cee59f15a60cc6269a25e3f6fbf1a577d6ab8115 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 29 Oct 2012 09:03:07 +1000 Subject: [PATCH 091/174] drm/nouveau: silence modesetting spam on pre-gf8 chipsets Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv04_dac.c | 16 ++++++++-------- drivers/gpu/drm/nouveau/nv04_dfp.c | 14 +++++++------- drivers/gpu/drm/nouveau/nv04_tv.c | 9 ++++----- 3 files changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index 347a3bd78d04..64f7020fb605 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -220,7 +220,7 @@ out: NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode); if (blue == 0x18) { - NV_INFO(drm, "Load detected on head A\n"); + NV_DEBUG(drm, "Load detected on head A\n"); return connector_status_connected; } @@ -338,8 +338,8 @@ nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) if (nv17_dac_sample_load(encoder) & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) { - NV_INFO(drm, "Load detected on output %c\n", - '@' + ffs(dcb->or)); + NV_DEBUG(drm, "Load detected on output %c\n", + '@' + ffs(dcb->or)); return connector_status_connected; } else { return connector_status_disconnected; @@ -413,9 +413,9 @@ static void nv04_dac_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable) @@ -461,8 +461,8 @@ static void nv04_dac_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON); } diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index da55d7642c8c..184cdf806761 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -476,9 +476,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), - nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode) @@ -520,8 +520,8 @@ static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n", + mode, nv_encoder->dcb->index); if (was_powersaving && is_powersaving_dpms(mode)) return; @@ -565,8 +565,8 @@ static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode) return; nv_encoder->last_dpms = mode; - NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n", + mode, nv_encoder->dcb->index); nv04_dfp_update_backlight(encoder, mode); nv04_dfp_update_fp_control(encoder, mode); diff --git a/drivers/gpu/drm/nouveau/nv04_tv.c b/drivers/gpu/drm/nouveau/nv04_tv.c index 099fbeda6e2e..62e826a139b3 100644 --- a/drivers/gpu/drm/nouveau/nv04_tv.c +++ b/drivers/gpu/drm/nouveau/nv04_tv.c @@ -75,8 +75,8 @@ static void nv04_tv_dpms(struct drm_encoder *encoder, int mode) struct nv04_mode_state *state = &nv04_display(dev)->mode_reg; uint8_t crtc1A; - NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n", - mode, nv_encoder->dcb->index); + NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n", + mode, nv_encoder->dcb->index); state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK); @@ -167,9 +167,8 @@ static void nv04_tv_commit(struct drm_encoder *encoder) helper->dpms(encoder, DRM_MODE_DPMS_ON); - NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n", - drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, - '@' + ffs(nv_encoder->dcb->or)); + NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); } static void nv04_tv_destroy(struct drm_encoder *encoder) From 1249ac592a2f995fef977be33abf077bdb57b3aa Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 30 Oct 2012 15:07:58 +1000 Subject: [PATCH 092/174] drm/nouveau/i2c: fix typo when checking nvio i2c port validity Reported-by: Mathieu Chouquet-Stringer Tested-by: Mathieu Chouquet-Stringer Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/i2c/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c index 3d2c88310f98..dbfc2abf0cfe 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c @@ -292,7 +292,7 @@ nouveau_i2c_ctor(struct nouveau_object *parent, struct nouveau_object *engine, case DCB_I2C_NVIO_BIT: port->drive = info.drive & 0x0f; if (device->card_type < NV_D0) { - if (info.drive >= ARRAY_SIZE(nv50_i2c_port)) + if (port->drive >= ARRAY_SIZE(nv50_i2c_port)) break; port->drive = nv50_i2c_port[port->drive]; port->sense = port->drive; From a7dbf00433fa9dc6f4a3828a17d56a9df2bd06b1 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 11:19:40 +1000 Subject: [PATCH 093/174] drm/nouveau: allow creation of zero-sized mm Useful for places where a given chipset may or may not have a given resource, and we want to avoid having to spray checks for the mm's existance around everywhere. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/core/mm.c | 9 ++++++--- drivers/gpu/drm/nouveau/core/include/core/mm.h | 1 - 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/core/mm.c b/drivers/gpu/drm/nouveau/core/core/mm.c index 4d6206448670..a6d3cd6490f7 100644 --- a/drivers/gpu/drm/nouveau/core/core/mm.c +++ b/drivers/gpu/drm/nouveau/core/core/mm.c @@ -218,13 +218,16 @@ nouveau_mm_init(struct nouveau_mm *mm, u32 offset, u32 length, u32 block) node = kzalloc(sizeof(*node), GFP_KERNEL); if (!node) return -ENOMEM; - node->offset = roundup(offset, mm->block_size); - node->length = rounddown(offset + length, mm->block_size) - node->offset; + + if (length) { + node->offset = roundup(offset, mm->block_size); + node->length = rounddown(offset + length, mm->block_size); + node->length -= node->offset; + } list_add_tail(&node->nl_entry, &mm->nodes); list_add_tail(&node->fl_entry, &mm->free); mm->heap_nodes++; - mm->heap_size += length; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/include/core/mm.h b/drivers/gpu/drm/nouveau/core/include/core/mm.h index 9ee9bf4028ca..975137ba34a6 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/mm.h +++ b/drivers/gpu/drm/nouveau/core/include/core/mm.h @@ -19,7 +19,6 @@ struct nouveau_mm { u32 block_size; int heap_nodes; - u32 heap_size; }; int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block); From 5cad16acd25b16681a060d28d10eeacf98d07701 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 10:51:00 +1000 Subject: [PATCH 094/174] drm/nv50/fb: prevent oops on chipsets without compression tags Unconditionally create the tagram mm, even if there's zero tags. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 27fb1af7a779..5f570806143a 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -219,13 +219,11 @@ nv50_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine, ((priv->base.ram.size & 0x000000ff) << 32); tags = nv_rd32(priv, 0x100320); - if (tags) { - ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); - if (ret) - return ret; + ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1); + if (ret) + return ret; - nv_debug(priv, "%d compression tags\n", tags); - } + nv_debug(priv, "%d compression tags\n", tags); size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail; switch (device->chipset) { From 9430738d80223a1cd791a2baa74fa170d3df1262 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:11:15 +1000 Subject: [PATCH 095/174] drm/nouveau: resurrect headless mode since rework Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 34 +++++++++++++---------- drivers/gpu/drm/nouveau/nouveau_drm.c | 34 ++++++++++++++--------- drivers/gpu/drm/nouveau/nouveau_drm.h | 2 ++ drivers/gpu/drm/nouveau/nouveau_irq.c | 16 ++++++----- 4 files changed, 51 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index d2f8ffeed742..0185837d9862 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -360,23 +360,26 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nv_device(drm->device)->card_type < NV_50) - ret = nv04_display_create(dev); - else - if (nv_device(drm->device)->card_type < NV_D0) - ret = nv50_display_create(dev); - else - ret = nvd0_display_create(dev); - if (ret) - goto disp_create_err; - - if (dev->mode_config.num_crtc) { - ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (nouveau_modeset == 1) { + if (nv_device(drm->device)->card_type < NV_50) + ret = nv04_display_create(dev); + else + if (nv_device(drm->device)->card_type < NV_D0) + ret = nv50_display_create(dev); + else + ret = nvd0_display_create(dev); if (ret) - goto vblank_err; + goto disp_create_err; + + if (dev->mode_config.num_crtc) { + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); + if (ret) + goto vblank_err; + } + + nouveau_backlight_init(dev); } - nouveau_backlight_init(dev); return 0; vblank_err: @@ -395,7 +398,8 @@ nouveau_display_destroy(struct drm_device *dev) nouveau_backlight_exit(dev); drm_vblank_cleanup(dev); - disp->dtor(dev); + if (disp->dtor) + disp->dtor(dev); drm_kms_helper_poll_fini(dev); drm_mode_config_cleanup(dev); diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index ccae8c26ae2b..9cc83f18f9dc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -63,8 +63,9 @@ MODULE_PARM_DESC(noaccel, "disable kernel/abi16 acceleration"); static int nouveau_noaccel = 0; module_param_named(noaccel, nouveau_noaccel, int, 0400); -MODULE_PARM_DESC(modeset, "enable driver"); -static int nouveau_modeset = -1; +MODULE_PARM_DESC(modeset, "enable driver (default: auto, " + "0 = disabled, 1 = enabled, 2 = headless)"); +int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); static struct drm_driver driver; @@ -363,7 +364,8 @@ nouveau_drm_unload(struct drm_device *dev) nouveau_pm_fini(dev); - nouveau_display_fini(dev); + if (dev->mode_config.num_crtc) + nouveau_display_fini(dev); nouveau_display_destroy(dev); nouveau_irq_fini(dev); @@ -403,13 +405,15 @@ nouveau_drm_suspend(struct pci_dev *pdev, pm_message_t pm_state) pm_state.event == PM_EVENT_PRETHAW) return 0; - NV_INFO(drm, "suspending fbcon...\n"); - nouveau_fbcon_set_suspend(dev, 1); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "suspending fbcon...\n"); + nouveau_fbcon_set_suspend(dev, 1); - NV_INFO(drm, "suspending display...\n"); - ret = nouveau_display_suspend(dev); - if (ret) - return ret; + NV_INFO(drm, "suspending display...\n"); + ret = nouveau_display_suspend(dev); + if (ret) + return ret; + } NV_INFO(drm, "evicting buffers...\n"); ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM); @@ -445,8 +449,10 @@ fail_client: nouveau_client_init(&cli->base); } - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return ret; } @@ -486,8 +492,10 @@ nouveau_drm_resume(struct pci_dev *pdev) nouveau_irq_postinstall(dev); nouveau_pm_resume(dev); - NV_INFO(drm, "resuming display...\n"); - nouveau_display_resume(dev); + if (dev->mode_config.num_crtc) { + NV_INFO(drm, "resuming display...\n"); + nouveau_display_resume(dev); + } return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h index 819471217546..a10169927086 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.h +++ b/drivers/gpu/drm/nouveau/nouveau_drm.h @@ -141,4 +141,6 @@ int nouveau_drm_resume(struct pci_dev *); nv_info((cli), fmt, ##args); \ } while (0) +extern int nouveau_modeset; + #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 9ca8afdb5549..1d8cb506a28a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -61,13 +61,15 @@ nouveau_irq_handler(DRM_IRQ_ARGS) nv_subdev(pmc)->intr(nv_subdev(pmc)); - if (device->card_type >= NV_D0) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nvd0_display_intr(dev); - } else - if (device->card_type >= NV_50) { - if (nv_rd32(device, 0x000100) & 0x04000000) - nv50_display_intr(dev); + if (dev->mode_config.num_crtc) { + if (device->card_type >= NV_D0) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nvd0_display_intr(dev); + } else + if (device->card_type >= NV_50) { + if (nv_rd32(device, 0x000100) & 0x04000000) + nv50_display_intr(dev); + } } return IRQ_HANDLED; From e412e95a268fa8544858ebfe066826b290430d51 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 31 Oct 2012 12:16:06 +1000 Subject: [PATCH 096/174] drm/nouveau: headless mode by default if pci class != vga display This is to prevent nouveau from taking over the console on headless boards such as Tesla. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 4 +++- drivers/gpu/drm/nouveau/nouveau_drm.c | 2 -- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 0185837d9862..86124b131f4f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -290,6 +290,7 @@ nouveau_display_create(struct drm_device *dev) struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_disp *pdisp = nouveau_disp(drm->device); struct nouveau_display *disp; + u32 pclass = dev->pdev->class >> 8; int ret, gen; disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL); @@ -360,7 +361,8 @@ nouveau_display_create(struct drm_device *dev) drm_kms_helper_poll_init(dev); drm_kms_helper_poll_disable(dev); - if (nouveau_modeset == 1) { + if (nouveau_modeset == 1 || + (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) { if (nv_device(drm->device)->card_type < NV_50) ret = nv04_display_create(dev); else diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 9cc83f18f9dc..0910125cbbc3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -670,9 +670,7 @@ nouveau_drm_init(void) #ifdef CONFIG_VGA_CONSOLE if (vgacon_text_force()) nouveau_modeset = 0; - else #endif - nouveau_modeset = 1; } if (!nouveau_modeset) From 08f05c49749ee655bef921d12160960a273aad47 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 31 Oct 2012 03:37:48 +0000 Subject: [PATCH 097/174] Return the right error value when dup[23]() newfd argument is too large Jack Lin reports that the error return from dup3() for the RLIMIT_NOFILE case changed incorrectly after 3.6. The culprit is commit f33ff9927f42 ("take rlimit check to callers of expand_files()") which when it moved the "return -EMFILE" out to the caller, didn't notice that the dup3() had special code to turn the EMFILE return into EBADF. The replace_fd() helper that got added later then inherited the bug too. Reported-by: Jack Lin Signed-off-by: Al Viro [ Noted more bugs, wrote proper changelog, fixed up typos - Linus ] Signed-off-by: Linus Torvalds --- fs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/file.c b/fs/file.c index d3b5fa80b71b..708d997a7748 100644 --- a/fs/file.c +++ b/fs/file.c @@ -900,7 +900,7 @@ int replace_fd(unsigned fd, struct file *file, unsigned flags) return __close_fd(files, fd); if (fd >= rlimit(RLIMIT_NOFILE)) - return -EMFILE; + return -EBADF; spin_lock(&files->file_lock); err = expand_files(files, fd); @@ -926,7 +926,7 @@ SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags) return -EINVAL; if (newfd >= rlimit(RLIMIT_NOFILE)) - return -EMFILE; + return -EBADF; spin_lock(&files->file_lock); err = expand_files(files, newfd); From 32ed1911fc79908d704023317d4ddeb3883fd07e Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Tue, 30 Oct 2012 23:39:10 -0700 Subject: [PATCH 098/174] Input: tsc40 - remove wrong announcement of pressure support The tsc40 driver announces it supports the pressure event, but will never send one. The announcement will cause tslib to wait for such events and sending all touch events with a pressure of 0. Removing the announcement will make tslib fall back to emulating the pressure on touch events so everything works as expected. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc40.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c index 63209aaa55f0..eb96f168fb9d 100644 --- a/drivers/input/touchscreen/tsc40.c +++ b/drivers/input/touchscreen/tsc40.c @@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv) __set_bit(BTN_TOUCH, input_dev->keybit); input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); - input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); serio_set_drvdata(serio, ptsc); From 16c2e1fae8d60a9d6d16e009a76ba3472568e094 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 31 Oct 2012 07:41:42 +0100 Subject: [PATCH 099/174] ALSA: ice1724: Fix rate setup after resume The rate isn't restored properly after resume since it's only set up in hw_params, and not in prepare callback. For fixing it, put the corresponding call to resume callback as well. Reported-and-tested-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/pci/ice1712/ice1724.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 3050a5279253..245d874891ba 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -2859,7 +2859,12 @@ static int snd_vt1724_resume(struct device *dev) ice->set_spdif_clock(ice, 0); } else { /* internal on-card clock */ - snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1); + int rate; + if (ice->cur_rate) + rate = ice->cur_rate; + else + rate = ice->pro_rate_default; + snd_vt1724_set_pro_rate(ice, rate, 1); } update_spdif_bits(ice, ice->pm_saved_spdif_ctrl); From 3ccc60f9d8c39180c205dba1a020735bda1b2491 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Oct 2012 13:28:46 +0200 Subject: [PATCH 100/174] HID: microsoft: fix invalid rdesc for 3k kbd Microsoft Digital Media Keyboard 3000 has two interfaces, and the second one has a report descriptor with a bug. The second collection says: 05 01 -- global; usage page -- 01 -- Generic Desktop Controls 09 80 -- local; usage -- 80 -- System Control a1 01 -- main; collection -- 01 -- application 85 03 -- global; report ID -- 03 19 00 -- local; Usage Minimum -- 00 29 ff -- local; Usage Maximum -- ff 15 00 -- global; Logical Minimum -- 0 26 ff 00 -- global; Logical Maximum -- ff 81 00 -- main; input c0 -- main; End Collection I.e. it makes us think that there are all kinds of usages of system control. That the keyboard is a not only a keyboard, but also a joystick, mouse, gamepad, keypad, etc. The same as for the Wireless Desktop Receiver, this should be Physical Min/Max. So fix that appropriately. References: https://bugzilla.novell.com/show_bug.cgi?id=776834 Cc: Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/hid-microsoft.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 3acdcfcc17df..f676c01bb471 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -28,22 +28,30 @@ #define MS_RDESC 0x08 #define MS_NOGET 0x10 #define MS_DUPLICATE_USAGES 0x20 +#define MS_RDESC_3K 0x40 -/* - * Microsoft Wireless Desktop Receiver (Model 1028) has - * 'Usage Min/Max' where it ought to have 'Physical Min/Max' - */ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); + /* + * Microsoft Wireless Desktop Receiver (Model 1028) has + * 'Usage Min/Max' where it ought to have 'Physical Min/Max' + */ if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n"); rdesc[557] = 0x35; rdesc[559] = 0x45; } + /* the same as above (s/usage/physical/) */ + if ((quirks & MS_RDESC_3K) && *rsize == 106 && + !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, + &rdesc[94], 4)) { + rdesc[94] = 0x35; + rdesc[96] = 0x45; + } return rdesc; } @@ -192,7 +200,7 @@ static const struct hid_device_id ms_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB), .driver_data = MS_PRESENTER }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K), - .driver_data = MS_ERGONOMY }, + .driver_data = MS_ERGONOMY | MS_RDESC_3K }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0), .driver_data = MS_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500), From 65b258e9b57980c8241342928d5cd717ee11a68b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 25 Oct 2012 15:35:25 +0100 Subject: [PATCH 101/174] HID: multitouch: put the case in the right switch statement Signed-off-by: Alan Cox Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 3eb02b94fc87..c97011cdf852 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -421,11 +421,11 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, * contact max are global to the report */ td->last_field_index = field->index; return -1; - } case HID_DG_TOUCH: /* Legacy devices use TIPSWITCH and not TOUCH. * Let's just ignore this field. */ return -1; + } /* let hid-input decide for the others */ return 0; From 58ad34bf62b9fc52c04e6aabe3ad5a47e4a00dc1 Mon Sep 17 00:00:00 2001 From: Xianhan Yu Date: Mon, 29 Oct 2012 23:04:37 +0800 Subject: [PATCH 102/174] HID: multitouch: fix maxcontacts problem on GeneralTouch Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen. Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We fix the device that driver can get maxcontact from our device, hence it doesn't need .maxcontact=10. Now there is just one device class can fix all our PWT touchscreen. Signed-off-by: Xianhan Yu Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index c97011cdf852..7867d69f0efe 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -210,8 +210,7 @@ static struct mt_class mt_classes[] = { }, { .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS, .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP | - MT_QUIRK_SLOT_IS_CONTACTNUMBER, - .maxcontacts = 10 + MT_QUIRK_SLOT_IS_CONTACTNUMBER }, { .name = MT_CLS_FLATFROG, From 8d80da90f53d37cf6caefc61353e1cc3a145b9e0 Mon Sep 17 00:00:00 2001 From: Dirk Hohndel Date: Tue, 30 Oct 2012 11:11:48 -0700 Subject: [PATCH 103/174] HID: Add support for the MacBook Pro 10,2 keyboard / touchpad This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 ++++++ drivers/hid/hid-core.c | 6 ++++++ drivers/hid/hid-ids.h | 3 +++ drivers/input/mouse/bcm5974.c | 21 +++++++++++++++++++++ 4 files changed, 36 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 06ebdbb6ea02..fd7722aecf77 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -522,6 +522,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index bd3971bf31bf..f4109fd657ff 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1532,6 +1532,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, @@ -2139,6 +2142,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 269b50912a4a..9d7a42857ea1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -118,6 +118,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 #define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 #define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a #define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3a78f235fa3e..2baff1b79a55 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -84,6 +84,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262 #define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263 #define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264 +/* MacbookPro10,2 (unibody, October 2012) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259 +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a +#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -137,6 +141,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS), + /* MacbookPro10,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS), /* Terminating entry */ {} }; @@ -379,6 +387,19 @@ static const struct bcm5974_config bcm5974_config_table[] = { { SN_COORD, -150, 6730 }, { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { SN_PRESSURE, 0, 300 }, + { SN_WIDTH, 0, 2048 }, + { SN_COORD, -4750, 5280 }, + { SN_COORD, -150, 6730 }, + { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION } + }, {} }; From 44c91697fb1add76f9f8c28c0d21b82b05b5d4cb Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Thu, 18 Oct 2012 18:59:55 +0900 Subject: [PATCH 104/174] drm/exynos: fix display on issue When crtc_funcs->dpms callback is called, exynos_crtc->dpms and exynos_encoder->dpms are changed to new mode. But if user requests dpms mode operation, OFF -> ON, when crtc's dpms callback is called, exynos_encoder->dpms is also changed to ON. This makes encoder's dpms callback call be ignored so display power couldn't become on again. This patch removes exynos_encoder->dpms changing and adds 'updated' variable to exynos_drm_encoder structure to avoid duplicated overlay updating. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_connector.c | 1 + drivers/gpu/drm/exynos/exynos_drm_encoder.c | 33 ++++++++++--------- 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index 18c271862ca8..0f68a2872673 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -374,6 +374,7 @@ struct drm_connector *exynos_drm_connector_create(struct drm_device *dev, exynos_connector->encoder_id = encoder->base.id; exynos_connector->manager = manager; exynos_connector->dpms = DRM_MODE_DPMS_OFF; + connector->dpms = DRM_MODE_DPMS_OFF; connector->encoder = encoder; err = drm_mode_connector_attach_encoder(connector, encoder); diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index e51503fbaf2b..241ad1eeec64 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -43,12 +43,14 @@ * @manager: specific encoder has its own manager to control a hardware * appropriately and we can access a hardware drawing on this manager. * @dpms: store the encoder dpms value. + * @updated: indicate whether overlay data updating is needed or not. */ struct exynos_drm_encoder { struct drm_crtc *old_crtc; struct drm_encoder drm_encoder; struct exynos_drm_manager *manager; - int dpms; + int dpms; + bool updated; }; static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode) @@ -85,7 +87,9 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: if (manager_ops && manager_ops->apply) - manager_ops->apply(manager->dev); + if (!exynos_encoder->updated) + manager_ops->apply(manager->dev); + exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; break; @@ -94,6 +98,7 @@ static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode) case DRM_MODE_DPMS_OFF: exynos_drm_connector_power(encoder, mode); exynos_encoder->dpms = mode; + exynos_encoder->updated = false; break; default: DRM_ERROR("unspecified mode %d\n", mode); @@ -205,13 +210,22 @@ static void exynos_drm_encoder_prepare(struct drm_encoder *encoder) static void exynos_drm_encoder_commit(struct drm_encoder *encoder) { - struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder); + struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder); + struct exynos_drm_manager *manager = exynos_encoder->manager; struct exynos_drm_manager_ops *manager_ops = manager->ops; DRM_DEBUG_KMS("%s\n", __FILE__); if (manager_ops && manager_ops->commit) manager_ops->commit(manager->dev); + + /* + * this will avoid one issue that overlay data is updated to + * real hardware two times. + * And this variable will be used to check if the data was + * already updated or not by exynos_drm_encoder_dpms function. + */ + exynos_encoder->updated = true; } static void exynos_drm_encoder_disable(struct drm_encoder *encoder) @@ -400,19 +414,6 @@ void exynos_drm_encoder_crtc_dpms(struct drm_encoder *encoder, void *data) if (manager_ops && manager_ops->dpms) manager_ops->dpms(manager->dev, mode); - /* - * set current mode to new one so that data aren't updated into - * registers by drm_helper_connector_dpms two times. - * - * in case that drm_crtc_helper_set_mode() is called, - * overlay_ops->commit() and manager_ops->commit() callbacks - * can be called two times, first at drm_crtc_helper_set_mode() - * and second at drm_helper_connector_dpms(). - * so with this setting, when drm_helper_connector_dpms() is called - * encoder->funcs->dpms() will be ignored. - */ - exynos_encoder->dpms = mode; - /* * if this condition is ok then it means that the crtc is already * detached from encoder and last function for detaching is properly From 25a5803037cbe4dedd96011293c94982860785fc Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 30 Oct 2012 16:08:05 +0900 Subject: [PATCH 105/174] MAINTAINERS: Add git repository for Exynos DRM Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1fa907441f8f..a6391ce40ccf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2507,6 +2507,7 @@ M: Joonyoung Shim M: Seung-Woo Kim M: Kyungmin Park L: dri-devel@lists.freedesktop.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* From 9eb3e9e6f3cface0d2ffa8d889f44af27dcbce7b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 29 Oct 2012 09:31:13 +0100 Subject: [PATCH 106/174] drm/exynos: add support for ARCH_MULTIPLATFORM Exynos does not seem to have any dependency on anything from platform headers so just needs Kconfig updated to build in ARCH_MULTIPLATFORM builds. Signed-off-by: Rob Clark Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 59a26e577b57..fc345d4ebb03 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -1,6 +1,6 @@ config DRM_EXYNOS tristate "DRM Support for Samsung SoC EXYNOS Series" - depends on DRM && PLAT_SAMSUNG + depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM) select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA From 2cdc53b355873ab54b6a348ee5bf022967fb4159 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Wed, 31 Oct 2012 09:36:26 +0530 Subject: [PATCH 107/174] drm: exynos: removed warning due to missing typecast for mixer driver data Removing the warning by adding proper type casting where local pointer variable of type mixer driver data is assigned with void pointer. Signed-off-by: Rahul Sharma Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 614b2e9ac462..e7fbb823fd8e 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1142,7 +1142,7 @@ static int __devinit mixer_probe(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), pdev->dev.of_node); - drv = match->data; + drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; From 95a7d76897c1e7243d4137037c66d15cbf2cce76 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 31 Oct 2012 12:38:31 -0400 Subject: [PATCH 108/174] xen/mmu: Use Xen specific TLB flush instead of the generic one. As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by: Jingjie Jiang Suggested-by: Mukesh Rathor Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 21 ++++++++++++++++++++- include/trace/events/xen.h | 8 ++++++++ 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 6226c99729b9..dcf5f2dd91ec 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1288,6 +1288,25 @@ unsigned long xen_read_cr2_direct(void) return this_cpu_read(xen_vcpu_info.arch.cr2); } +void xen_flush_tlb_all(void) +{ + struct mmuext_op *op; + struct multicall_space mcs; + + trace_xen_mmu_flush_tlb_all(0); + + preempt_disable(); + + mcs = xen_mc_entry(sizeof(*op)); + + op = mcs.args; + op->cmd = MMUEXT_TLB_FLUSH_ALL; + MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); + + xen_mc_issue(PARAVIRT_LAZY_MMU); + + preempt_enable(); +} static void xen_flush_tlb(void) { struct mmuext_op *op; @@ -2518,7 +2537,7 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma, err = 0; out: - flush_tlb_all(); + xen_flush_tlb_all(); return err; } diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h index 15ba03bdd7c6..d06b6da5c1e3 100644 --- a/include/trace/events/xen.h +++ b/include/trace/events/xen.h @@ -377,6 +377,14 @@ DECLARE_EVENT_CLASS(xen_mmu_pgd, DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin); DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin); +TRACE_EVENT(xen_mmu_flush_tlb_all, + TP_PROTO(int x), + TP_ARGS(x), + TP_STRUCT__entry(__array(char, x, 0)), + TP_fast_assign((void)x), + TP_printk("%s", "") + ); + TRACE_EVENT(xen_mmu_flush_tlb, TP_PROTO(int x), TP_ARGS(x), From 399f11c3d872bd748e1575574de265a6304c7c43 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Tue, 30 Oct 2012 16:06:35 -0400 Subject: [PATCH 109/174] NFS: Wait for session recovery to finish before returning Currently, we will schedule session recovery and then return to the caller of nfs4_handle_exception. This works for most cases, but causes a hang on the following test case: Client Server ------ ------ Open file over NFS v4.1 Write to file Expire client Try to lock file The server will return NFS4ERR_BADSESSION, prompting the client to schedule recovery. However, the client will continue placing lock attempts and the open recovery never seems to be scheduled. The simplest solution is to wait for session recovery to run before retrying the lock. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 68b21d81b7ac..d5fbf1f49d5f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -339,8 +339,7 @@ static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struc dprintk("%s ERROR: %d Reset session\n", __func__, errorcode); nfs4_schedule_session_recovery(clp->cl_session, errorcode); - exception->retry = 1; - break; + goto wait_on_recovery; #endif /* defined(CONFIG_NFS_V4_1) */ case -NFS4ERR_FILE_OPEN: if (exception->timeout > HZ) { From 3c172868cbbe3eb138fd57bb346c77dffb22b182 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 26 Oct 2012 06:24:34 +0000 Subject: [PATCH 110/174] vxlan: don't expire permanent entries VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 607976c00162..7b4adde93c01 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -816,7 +816,7 @@ static void vxlan_cleanup(unsigned long arg) = container_of(p, struct vxlan_fdb, hlist); unsigned long timeout; - if (f->state == NUD_PERMANENT) + if (f->state & NUD_PERMANENT) continue; timeout = f->used + vxlan->age_interval * HZ; From 2240a9e2d013d8269ea425b73e1d7a54c7bc141f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 18:37:40 -0400 Subject: [PATCH 111/174] NFSv4.1: We must release the sequence id when we fail to get a session slot If we do not release the sequence id in cases where we fail to get a session slot, then we can deadlock if we hit a recovery scenario. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index d5fbf1f49d5f..e0423bb5a880 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1571,9 +1571,11 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) data->timestamp = jiffies; if (nfs4_setup_sequence(data->o_arg.server, &data->o_arg.seq_args, - &data->o_res.seq_res, task)) - return; - rpc_call_start(task); + &data->o_res.seq_res, + task) != 0) + nfs_release_seqid(data->o_arg.seqid); + else + rpc_call_start(task); return; unlock_no_action: rcu_read_unlock(); @@ -2295,9 +2297,10 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) if (nfs4_setup_sequence(NFS_SERVER(inode), &calldata->arg.seq_args, &calldata->res.seq_res, - task)) - goto out; - rpc_call_start(task); + task) != 0) + nfs_release_seqid(calldata->arg.seqid); + else + rpc_call_start(task); out: dprintk("%s: done!\n", __func__); } @@ -4544,9 +4547,11 @@ static void nfs4_locku_prepare(struct rpc_task *task, void *data) calldata->timestamp = jiffies; if (nfs4_setup_sequence(calldata->server, &calldata->arg.seq_args, - &calldata->res.seq_res, task)) - return; - rpc_call_start(task); + &calldata->res.seq_res, + task) != 0) + nfs_release_seqid(calldata->arg.seqid); + else + rpc_call_start(task); } static const struct rpc_call_ops nfs4_locku_ops = { @@ -4691,7 +4696,7 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata) /* Do we need to do an open_to_lock_owner? */ if (!(data->arg.lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)) { if (nfs_wait_on_sequence(data->arg.open_seqid, task) != 0) - return; + goto out_release_lock_seqid; data->arg.open_stateid = &state->stateid; data->arg.new_lock_owner = 1; data->res.open_seqid = data->arg.open_seqid; @@ -4700,10 +4705,15 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata) data->timestamp = jiffies; if (nfs4_setup_sequence(data->server, &data->arg.seq_args, - &data->res.seq_res, task)) + &data->res.seq_res, + task) == 0) { + rpc_call_start(task); return; - rpc_call_start(task); - dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status); + } + nfs_release_seqid(data->arg.open_seqid); +out_release_lock_seqid: + nfs_release_seqid(data->arg.lock_seqid); + dprintk("%s: done!, ret = %d\n", __func__, task->tk_status); } static void nfs4_recover_lock_prepare(struct rpc_task *task, void *calldata) From 2b1bc308f492589f7d49012ed24561534ea2be8c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 18:53:23 -0400 Subject: [PATCH 112/174] NFSv4: nfs4_locku_done must release the sequence id If the state recovery machinery is triggered by the call to nfs4_async_handle_error() then we can deadlock. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index e0423bb5a880..1465364501ba 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4531,6 +4531,7 @@ static void nfs4_locku_done(struct rpc_task *task, void *data) if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN) rpc_restart_call_prepare(task); } + nfs_release_seqid(calldata->arg.seqid); } static void nfs4_locku_prepare(struct rpc_task *task, void *data) From 29c4bcddaa62e2b9fd2ba85668f6718b0b43f0e3 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 31 Oct 2012 00:30:38 +0100 Subject: [PATCH 113/174] cpufreq / powernow-k8: Change maintainer's email address Change the Andreas' email address in drivers/cpufreq/powernow-k8.c. Signed-off-by: Andreas Herrmann Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c16a3a593ba4..e3ebb4fa2c3e 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -5,7 +5,7 @@ * http://www.gnu.org/licenses/gpl.html * * Maintainer: - * Andreas Herrmann + * Andreas Herrmann * * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones on behalf of SuSE Labs From 8d96b10639fb402357b75b055b1e82a65ff95050 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 31 Oct 2012 12:16:01 +1100 Subject: [PATCH 114/174] NFS: fix bug in legacy DNS resolver. The DNS resolver's use of the sunrpc cache involves a 'ttl' number (relative) rather that a timeout (absolute). This confused me when I wrote commit c5b29f885afe890f953f7f23424045cdad31d3e4 "sunrpc: use seconds since boot in expiry cache" and I managed to break it. The effect is that any TTL is interpreted as 0, and nothing useful gets into the cache. This patch removes the use of get_expiry() - which really expects an expiry time - and uses get_uint() instead, treating the int correctly as a ttl. This fixes a regression that has been present since 2.6.37, causing certain NFS accesses in certain environments to incorrectly fail. Reported-by: Chuck Lever Tested-by: Chuck Lever Cc: stable@vger.kernel.org Signed-off-by: NeilBrown Signed-off-by: Trond Myklebust --- fs/nfs/dns_resolve.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c index 31c26c4dcc23..ca4b11ec87a2 100644 --- a/fs/nfs/dns_resolve.c +++ b/fs/nfs/dns_resolve.c @@ -217,7 +217,7 @@ static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen) { char buf1[NFS_DNS_HOSTNAME_MAXLEN+1]; struct nfs_dns_ent key, *item; - unsigned long ttl; + unsigned int ttl; ssize_t len; int ret = -EINVAL; @@ -240,7 +240,8 @@ static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen) key.namelen = len; memset(&key.h, 0, sizeof(key.h)); - ttl = get_expiry(&buf); + if (get_uint(&buf, &ttl) < 0) + goto out; if (ttl == 0) goto out; key.h.expiry_time = ttl + seconds_since_boot(); From 7175fe90153e6375082d65884fbb41ab3bbb4901 Mon Sep 17 00:00:00 2001 From: Yanchuan Nian Date: Wed, 31 Oct 2012 16:05:48 +0800 Subject: [PATCH 115/174] nfs: Check whether a layout pointer is NULL before free it The new layout pointer in pnfs_find_alloc_layout() may be NULL because of out of memory. we must do some check work, otherwise pnfs_free_layout_hdr() will go wrong because it can not deal with a NULL pointer. Signed-off-by: Yanchuan Nian Signed-off-by: Trond Myklebust --- fs/nfs/pnfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index fe624c91bd00..2878f97bd78d 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -925,8 +925,8 @@ pnfs_find_alloc_layout(struct inode *ino, if (likely(nfsi->layout == NULL)) { /* Won the race? */ nfsi->layout = new; return new; - } - pnfs_free_layout_hdr(new); + } else if (new != NULL) + pnfs_free_layout_hdr(new); out_existing: pnfs_get_layout_hdr(nfsi->layout); return nfsi->layout; From acce94e68a0f346115fd41cdc298197d2d5a59ad Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Tue, 16 Oct 2012 13:22:19 -0400 Subject: [PATCH 116/174] nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts In very busy v3 environment, rpc.mountd can respond to the NULL procedure but not the MNT procedure in a timely manner causing the MNT procedure to time out. The problem is the mount system call returns EIO which causes the mount to fail, instead of ETIMEDOUT, which would cause the mount to be retried. This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to the rpc_call_sync() call in nfs_mount() which causes ETIMEDOUT to be returned on timed out connections. Signed-off-by: Steve Dickson Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/mount_clnt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c index 8e65c7f1f87c..015f71f8f62c 100644 --- a/fs/nfs/mount_clnt.c +++ b/fs/nfs/mount_clnt.c @@ -181,7 +181,7 @@ int nfs_mount(struct nfs_mount_request *info) else msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT]; - status = rpc_call_sync(mnt_clnt, &msg, 0); + status = rpc_call_sync(mnt_clnt, &msg, RPC_TASK_SOFT|RPC_TASK_TIMEOUT); rpc_shutdown_client(mnt_clnt); if (status < 0) From 97a54868262da1629a3e65121e65b8e8c4419d9f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 21 Oct 2012 19:23:52 +0100 Subject: [PATCH 117/174] nfs: Show original device name verbatim in /proc/*/mount{s,info} Since commit c7f404b ('vfs: new superblock methods to override /proc/*/mount{s,info}'), nfs_path() is used to generate the mounted device name reported back to userland. nfs_path() always generates a trailing slash when the given dentry is the root of an NFS mount, but userland may expect the original device name to be returned verbatim (as it used to be). Make this canonicalisation optional and change the callers accordingly. [jrnieder@gmail.com: use flag instead of bool argument] Reported-and-tested-by: Chris Hiestand Reference: http://bugs.debian.org/669314 Signed-off-by: Ben Hutchings Cc: # v2.6.39+ Signed-off-by: Jonathan Nieder Signed-off-by: Trond Myklebust --- fs/nfs/internal.h | 5 +++-- fs/nfs/namespace.c | 19 ++++++++++++++----- fs/nfs/nfs4namespace.c | 3 ++- fs/nfs/super.c | 2 +- 4 files changed, 20 insertions(+), 9 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 59b133c5d652..a54fe51c1dfb 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -353,8 +353,9 @@ extern void nfs_sb_active(struct super_block *sb); extern void nfs_sb_deactive(struct super_block *sb); /* namespace.c */ +#define NFS_PATH_CANONICAL 1 extern char *nfs_path(char **p, struct dentry *dentry, - char *buffer, ssize_t buflen); + char *buffer, ssize_t buflen, unsigned flags); extern struct vfsmount *nfs_d_automount(struct path *path); struct vfsmount *nfs_submount(struct nfs_server *, struct dentry *, struct nfs_fh *, struct nfs_fattr *); @@ -498,7 +499,7 @@ static inline char *nfs_devname(struct dentry *dentry, char *buffer, ssize_t buflen) { char *dummy; - return nfs_path(&dummy, dentry, buffer, buflen); + return nfs_path(&dummy, dentry, buffer, buflen, NFS_PATH_CANONICAL); } /* diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 655925373b91..dd057bc6b65b 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -33,6 +33,7 @@ int nfs_mountpoint_expiry_timeout = 500 * HZ; * @dentry - pointer to dentry * @buffer - result buffer * @buflen - length of buffer + * @flags - options (see below) * * Helper function for constructing the server pathname * by arbitrary hashed dentry. @@ -40,8 +41,14 @@ int nfs_mountpoint_expiry_timeout = 500 * HZ; * This is mainly for use in figuring out the path on the * server side when automounting on top of an existing partition * and in generating /proc/mounts and friends. + * + * Supported flags: + * NFS_PATH_CANONICAL: ensure there is exactly one slash after + * the original device (export) name + * (if unset, the original name is returned verbatim) */ -char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen) +char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen, + unsigned flags) { char *end; int namelen; @@ -74,7 +81,7 @@ rename_retry: rcu_read_unlock(); goto rename_retry; } - if (*end != '/') { + if ((flags & NFS_PATH_CANONICAL) && *end != '/') { if (--buflen < 0) { spin_unlock(&dentry->d_lock); rcu_read_unlock(); @@ -91,9 +98,11 @@ rename_retry: return end; } namelen = strlen(base); - /* Strip off excess slashes in base string */ - while (namelen > 0 && base[namelen - 1] == '/') - namelen--; + if (flags & NFS_PATH_CANONICAL) { + /* Strip off excess slashes in base string */ + while (namelen > 0 && base[namelen - 1] == '/') + namelen--; + } buflen -= namelen; if (buflen < 0) { spin_unlock(&dentry->d_lock); diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 79fbb61ce202..1e09eb78543b 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -81,7 +81,8 @@ static char *nfs_path_component(const char *nfspath, const char *end) static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen) { char *limit; - char *path = nfs_path(&limit, dentry, buffer, buflen); + char *path = nfs_path(&limit, dentry, buffer, buflen, + NFS_PATH_CANONICAL); if (!IS_ERR(path)) { char *path_component = nfs_path_component(path, limit); if (path_component) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index e831bce49766..13c2a5be4765 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -771,7 +771,7 @@ int nfs_show_devname(struct seq_file *m, struct dentry *root) int err = 0; if (!page) return -ENOMEM; - devname = nfs_path(&dummy, root, page, PAGE_SIZE); + devname = nfs_path(&dummy, root, page, PAGE_SIZE, 0); if (IS_ERR(devname)) err = PTR_ERR(devname); else From 324d003b0cd82151adbaecefef57b73f7959a469 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Tue, 30 Oct 2012 17:01:39 -0400 Subject: [PATCH 118/174] NFS: add nfs_sb_deactive_async to avoid deadlock Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue context. This avoids a deadlock where rpc_shutdown_client loops forever in a workqueue kworker context, trying to kill all RPC tasks associated with the client, while one or more of these tasks have already been assigned to the same kworker (and will never run rpc_exit_task). This approach is needed because RPC tasks that have already been assigned to a kworker by queue_work cannot be canceled, as explained in the comment for workqueue.c:insert_wq_barrier. Signed-off-by: Weston Andros Adamson [Trond: add module_get/put.] Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 5 ++++- fs/nfs/internal.h | 1 + fs/nfs/nfs4proc.c | 2 +- fs/nfs/super.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++ fs/nfs/unlink.c | 2 +- 5 files changed, 56 insertions(+), 3 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 5c7325c5c5e6..6fa01aea2488 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -685,7 +685,10 @@ static void __put_nfs_open_context(struct nfs_open_context *ctx, int is_sync) if (ctx->cred != NULL) put_rpccred(ctx->cred); dput(ctx->dentry); - nfs_sb_deactive(sb); + if (is_sync) + nfs_sb_deactive(sb); + else + nfs_sb_deactive_async(sb); kfree(ctx->mdsthreshold); kfree(ctx); } diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index a54fe51c1dfb..05521cadac2e 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -351,6 +351,7 @@ extern int __init register_nfs_fs(void); extern void __exit unregister_nfs_fs(void); extern void nfs_sb_active(struct super_block *sb); extern void nfs_sb_deactive(struct super_block *sb); +extern void nfs_sb_deactive_async(struct super_block *sb); /* namespace.c */ #define NFS_PATH_CANONICAL 1 diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1465364501ba..8cfbac1a8d5e 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2197,7 +2197,7 @@ static void nfs4_free_closedata(void *data) nfs4_put_open_state(calldata->state); nfs_free_seqid(calldata->arg.seqid); nfs4_put_state_owner(sp); - nfs_sb_deactive(sb); + nfs_sb_deactive_async(sb); kfree(calldata); } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 13c2a5be4765..652d3f7176a9 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -54,6 +54,7 @@ #include #include #include +#include #include @@ -415,6 +416,54 @@ void nfs_sb_deactive(struct super_block *sb) } EXPORT_SYMBOL_GPL(nfs_sb_deactive); +static int nfs_deactivate_super_async_work(void *ptr) +{ + struct super_block *sb = ptr; + + deactivate_super(sb); + module_put_and_exit(0); + return 0; +} + +/* + * same effect as deactivate_super, but will do final unmount in kthread + * context + */ +static void nfs_deactivate_super_async(struct super_block *sb) +{ + struct task_struct *task; + char buf[INET6_ADDRSTRLEN + 1]; + struct nfs_server *server = NFS_SB(sb); + struct nfs_client *clp = server->nfs_client; + + if (!atomic_add_unless(&sb->s_active, -1, 1)) { + rcu_read_lock(); + snprintf(buf, sizeof(buf), + rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR)); + rcu_read_unlock(); + + __module_get(THIS_MODULE); + task = kthread_run(nfs_deactivate_super_async_work, sb, + "%s-deactivate-super", buf); + if (IS_ERR(task)) { + pr_err("%s: kthread_run: %ld\n", + __func__, PTR_ERR(task)); + /* make synchronous call and hope for the best */ + deactivate_super(sb); + module_put(THIS_MODULE); + } + } +} + +void nfs_sb_deactive_async(struct super_block *sb) +{ + struct nfs_server *server = NFS_SB(sb); + + if (atomic_dec_and_test(&server->active)) + nfs_deactivate_super_async(sb); +} +EXPORT_SYMBOL_GPL(nfs_sb_deactive_async); + /* * Deliver file system statistics to userspace */ diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c index 13cea637eff8..3f79c77153b8 100644 --- a/fs/nfs/unlink.c +++ b/fs/nfs/unlink.c @@ -95,7 +95,7 @@ static void nfs_async_unlink_release(void *calldata) nfs_dec_sillycount(data->dir); nfs_free_unlinkdata(data); - nfs_sb_deactive(sb); + nfs_sb_deactive_async(sb); } static void nfs_unlink_prepare(struct rpc_task *task, void *calldata) From 87da7e66a40532b743cd50972fcf85a1f15b14ea Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 24 Oct 2012 14:07:59 +0800 Subject: [PATCH 119/174] KVM: x86: fix vcpu->mmio_fragments overflow After commit b3356bf0dbb349 (KVM: emulator: optimize "rep ins" handling), the pieces of io data can be collected and write them to the guest memory or MMIO together Unfortunately, kvm splits the mmio access into 8 bytes and store them to vcpu->mmio_fragments. If the guest uses "rep ins" to move large data, it will cause vcpu->mmio_fragments overflow The bug can be exposed by isapc (-M isapc): [23154.818733] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ ......] [23154.858083] Call Trace: [23154.859874] [] kvm_get_cr8+0x1d/0x28 [kvm] [23154.861677] [] kvm_arch_vcpu_ioctl_run+0xcda/0xe45 [kvm] [23154.863604] [] ? kvm_arch_vcpu_load+0x17b/0x180 [kvm] Actually, we can use one mmio_fragment to store a large mmio access then split it when we pass the mmio-exit-info to userspace. After that, we only need two entries to store mmio info for the cross-mmio pages access Signed-off-by: Xiao Guangrong Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 60 +++++++++++++++++++++++----------------- include/linux/kvm_host.h | 15 ++-------- 2 files changed, 36 insertions(+), 39 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 1eefebe5d727..224a7e78cb6c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3779,7 +3779,7 @@ static int write_exit_mmio(struct kvm_vcpu *vcpu, gpa_t gpa, { struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0]; - memcpy(vcpu->run->mmio.data, frag->data, frag->len); + memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len)); return X86EMUL_CONTINUE; } @@ -3832,18 +3832,11 @@ mmio: bytes -= handled; val += handled; - while (bytes) { - unsigned now = min(bytes, 8U); - - frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++]; - frag->gpa = gpa; - frag->data = val; - frag->len = now; - - gpa += now; - val += now; - bytes -= now; - } + WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS); + frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++]; + frag->gpa = gpa; + frag->data = val; + frag->len = bytes; return X86EMUL_CONTINUE; } @@ -3890,7 +3883,7 @@ int emulator_read_write(struct x86_emulate_ctxt *ctxt, unsigned long addr, vcpu->mmio_needed = 1; vcpu->mmio_cur_fragment = 0; - vcpu->run->mmio.len = vcpu->mmio_fragments[0].len; + vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len); vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write; vcpu->run->exit_reason = KVM_EXIT_MMIO; vcpu->run->mmio.phys_addr = gpa; @@ -5522,28 +5515,44 @@ static int complete_emulated_pio(struct kvm_vcpu *vcpu) * * read: * for each fragment - * write gpa, len - * exit - * copy data + * for each mmio piece in the fragment + * write gpa, len + * exit + * copy data * execute insn * * write: * for each fragment - * write gpa, len - * copy data - * exit + * for each mmio piece in the fragment + * write gpa, len + * copy data + * exit */ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) { struct kvm_run *run = vcpu->run; struct kvm_mmio_fragment *frag; + unsigned len; BUG_ON(!vcpu->mmio_needed); /* Complete previous fragment */ - frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++]; + frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment]; + len = min(8u, frag->len); if (!vcpu->mmio_is_write) - memcpy(frag->data, run->mmio.data, frag->len); + memcpy(frag->data, run->mmio.data, len); + + if (frag->len <= 8) { + /* Switch to the next fragment. */ + frag++; + vcpu->mmio_cur_fragment++; + } else { + /* Go forward to the next mmio piece. */ + frag->data += len; + frag->gpa += len; + frag->len -= len; + } + if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) { vcpu->mmio_needed = 0; if (vcpu->mmio_is_write) @@ -5551,13 +5560,12 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) vcpu->mmio_read_completed = 1; return complete_emulated_io(vcpu); } - /* Initiate next fragment */ - ++frag; + run->exit_reason = KVM_EXIT_MMIO; run->mmio.phys_addr = frag->gpa; if (vcpu->mmio_is_write) - memcpy(run->mmio.data, frag->data, frag->len); - run->mmio.len = frag->len; + memcpy(run->mmio.data, frag->data, min(8u, frag->len)); + run->mmio.len = min(8u, frag->len); run->mmio.is_write = vcpu->mmio_is_write; vcpu->arch.complete_userspace_io = complete_emulated_mmio; return 0; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 93bfc9f9815c..ecc554374e44 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -42,19 +42,8 @@ */ #define KVM_MEMSLOT_INVALID (1UL << 16) -/* - * If we support unaligned MMIO, at most one fragment will be split into two: - */ -#ifdef KVM_UNALIGNED_MMIO -# define KVM_EXTRA_MMIO_FRAGMENTS 1 -#else -# define KVM_EXTRA_MMIO_FRAGMENTS 0 -#endif - -#define KVM_USER_MMIO_SIZE 8 - -#define KVM_MAX_MMIO_FRAGMENTS \ - (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS) +/* Two fragments for cross MMIO pages. */ +#define KVM_MAX_MMIO_FRAGMENTS 2 /* * For the normal pfn, the highest 12 bits should be zero, From dea5f0998aa82bdeca260b87c653db11e91329b2 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 31 Oct 2012 22:04:26 -0700 Subject: [PATCH 120/174] target: Re-add explict zeroing of INQUIRY bounce buffer memory This patch fixes a regression in spc_emulate_inquiry() code where the local scope bounce buffer was no longer getting it's memory zeroed, causing various problems with SCSI initiators that depend upon areas of INQUIRY EVPD=0x83 payload having been zeroed. This bug was introduced with the following v3.7-rc1 patch + CC'ed stable commit: commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 Author: Paolo Bonzini Date: Fri Sep 7 17:30:38 2012 +0200 target: support zero allocation length in INQUIRY Go ahead and re-add the missing memset of bounce buffer memory to be copied into the outgoing se_cmd descriptor kmapped SGL payload. Reported-by: Kelsey Prantis Cc: Kelsey Prantis Cc: Paolo Bonzini Cc: Andy Grover Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_spc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 9229bd9ad61b..6fd434d3d7e4 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -605,6 +605,8 @@ static int spc_emulate_inquiry(struct se_cmd *cmd) unsigned char buf[SE_INQUIRY_BUF]; int p, ret; + memset(buf, 0, SE_INQUIRY_BUF); + if (dev == tpg->tpg_virt_lun0.lun_se_dev) buf[0] = 0x3f; /* Not connected */ else From 0d0f9dfb31e0a6c92063e235417b42df185b3275 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:44 -0700 Subject: [PATCH 121/174] target: Don't return success from module_init() if setup fails If the call to core_dev_release_virtual_lun0() fails, then nothing sets ret to anything other than 0, so even though everything is torn down and freed, target_core_init_configfs() will seem to succeed and the module will be loaded. Fix this by passing the return value on up the chain. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index 015f5be27bf6..c123327499a3 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -3206,7 +3206,8 @@ static int __init target_core_init_configfs(void) if (ret < 0) goto out; - if (core_dev_setup_virtual_lun0() < 0) + ret = core_dev_setup_virtual_lun0(); + if (ret < 0) goto out; return 0; From 3e03989b5868acf69a391a424dc71fcd6cc48167 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:45 -0700 Subject: [PATCH 122/174] target: Avoid integer overflow in se_dev_align_max_sectors() The expression (max_sectors * block_size) might overflow a u32 (indeed, since iblock sets max_hw_sectors to UINT_MAX, it is guaranteed to overflow and end up with a much-too-small result in many common cases). Fix this by doing an equivalent calculation that doesn't require multiplication. While we're touching this code, avoid splitting a printk format across two lines and use pr_info(...) instead of printk(KERN_INFO ...). Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8d774da16320..9abef9f8eb76 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -850,20 +850,20 @@ int se_dev_check_shutdown(struct se_device *dev) static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size) { - u32 tmp, aligned_max_sectors; + u32 aligned_max_sectors; + u32 alignment; /* * Limit max_sectors to a PAGE_SIZE aligned value for modern * transport_allocate_data_tasks() operation. */ - tmp = rounddown((max_sectors * block_size), PAGE_SIZE); - aligned_max_sectors = (tmp / block_size); - if (max_sectors != aligned_max_sectors) { - printk(KERN_INFO "Rounding down aligned max_sectors from %u" - " to %u\n", max_sectors, aligned_max_sectors); - return aligned_max_sectors; - } + alignment = max(1ul, PAGE_SIZE / block_size); + aligned_max_sectors = rounddown(max_sectors, alignment); - return max_sectors; + if (max_sectors != aligned_max_sectors) + pr_info("Rounding down aligned max_sectors from %u to %u\n", + max_sectors, aligned_max_sectors); + + return aligned_max_sectors; } void se_dev_set_default_attribs( From d5627acba9ae584cf4928af19f7ddf5f6837de32 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 31 Oct 2012 09:16:46 -0700 Subject: [PATCH 123/174] iscsi-target: Fix missed wakeup race in TX thread The sleeping code in iscsi_target_tx_thread() is susceptible to the classic missed wakeup race: - TX thread finishes handle_immediate_queue() and handle_response_queue(), thinks both queues are empty. - Another thread adds a queue entry and does wake_up_process(), which does nothing because the TX thread is still awake. - TX thread does schedule_timeout() and sleeps forever. In practice this can kill an iSCSI connection if for example an initiator does single-threaded writes and the target misses the wakeup window when queueing an R2T; in this case the connection will be stuck until the initiator loses patience and does some task management operation (or kills the connection entirely). Fix this by converting to wait_event_interruptible(), which does not suffer from this sort of race. Signed-off-by: Roland Dreier Cc: Andy Grover Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 4 +++- drivers/target/iscsi/iscsi_target_core.h | 1 + drivers/target/iscsi/iscsi_target_login.c | 1 + drivers/target/iscsi/iscsi_target_util.c | 22 ++++++++++++++++++++-- drivers/target/iscsi/iscsi_target_util.h | 1 + 5 files changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index d6ce2182e672..035c2c762537 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3719,7 +3719,9 @@ restart: */ iscsit_thread_check_cpumask(conn, current, 1); - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); + wait_event_interruptible(conn->queues_wq, + !iscsit_conn_all_queues_empty(conn) || + ts->status == ISCSI_THREAD_SET_RESET); if ((ts->status == ISCSI_THREAD_SET_RESET) || signal_pending(current)) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 2ba9f9b9435c..21048dbf7d13 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -486,6 +486,7 @@ struct iscsi_tmr_req { }; struct iscsi_conn { + wait_queue_head_t queues_wq; /* Authentication Successful for this connection */ u8 auth_complete; /* State connection is currently in */ diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index cdc8a10939c3..f8dbec05d5e5 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -41,6 +41,7 @@ static int iscsi_login_init_conn(struct iscsi_conn *conn) { + init_waitqueue_head(&conn->queues_wq); INIT_LIST_HEAD(&conn->conn_list); INIT_LIST_HEAD(&conn->conn_cmd_list); INIT_LIST_HEAD(&conn->immed_queue_list); diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index afd98ccd40ae..1a91195ab619 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -488,7 +488,7 @@ void iscsit_add_cmd_to_immediate_queue( atomic_set(&conn->check_immediate_queue, 1); spin_unlock_bh(&conn->immed_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn) @@ -562,7 +562,7 @@ void iscsit_add_cmd_to_response_queue( atomic_inc(&cmd->response_queue_count); spin_unlock_bh(&conn->response_queue_lock); - wake_up_process(conn->thread_set->tx_thread); + wake_up(&conn->queues_wq); } struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn) @@ -616,6 +616,24 @@ static void iscsit_remove_cmd_from_response_queue( } } +bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn) +{ + bool empty; + + spin_lock_bh(&conn->immed_queue_lock); + empty = list_empty(&conn->immed_queue_list); + spin_unlock_bh(&conn->immed_queue_lock); + + if (!empty) + return empty; + + spin_lock_bh(&conn->response_queue_lock); + empty = list_empty(&conn->response_queue_list); + spin_unlock_bh(&conn->response_queue_lock); + + return empty; +} + void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) { struct iscsi_queue_req *qr, *qr_tmp; diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 44054bd35437..894d0f837924 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -25,6 +25,7 @@ extern struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_ extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8); extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *); extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *); +extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); extern void iscsit_free_cmd(struct iscsi_cmd *); From ab74b3d62f05192bf8fb8f169e7999d1183b2e08 Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Wed, 31 Oct 2012 10:24:02 -0700 Subject: [PATCH 124/174] target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock around se_cmd->t_state_lock while spin_lock_irqsave is held via se_sess->sess_cmd_lock. Signed-off-by: Steve Hodgson Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_tmr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 1c59a3c23b2c..be75c4331a92 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -140,15 +140,15 @@ void core_tmr_abort_task( printk("ABORT_TASK: Found referenced %s task_tag: %u\n", se_cmd->se_tfo->get_fabric_name(), ref_tag); - spin_lock_irq(&se_cmd->t_state_lock); + spin_lock(&se_cmd->t_state_lock); if (se_cmd->transport_state & CMD_T_COMPLETE) { printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag); - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); goto out; } se_cmd->transport_state |= CMD_T_ABORTED; - spin_unlock_irq(&se_cmd->t_state_lock); + spin_unlock(&se_cmd->t_state_lock); list_del_init(&se_cmd->se_cmd_list); kref_get(&se_cmd->cmd_kref); From 83325d072185899b706de2956170b246585aaec9 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:29:49 +0200 Subject: [PATCH 125/174] DRM/Radeon: Fix Load Detection on legacy primary DAC. An uninitialized variable led to broken load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 0063df9d166d..f278f20ea12a 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -671,6 +671,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN; WREG32(RADEON_DAC_CNTL, tmp); + tmp = dac_macro_cntl; tmp &= ~(RADEON_DAC_PDWN_R | RADEON_DAC_PDWN_G | RADEON_DAC_PDWN_B); From 9c50b1d937cc9656100ba10d9f57484c6d173936 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:31:19 +0200 Subject: [PATCH 126/174] DRM/Radeon: Fix primary DAC Load Detection for RV100 chips. For Radeon 7500 ATI recommends a DAC_FORCE value of 0x1ac. This value works better on ES1000 (RV100) chips, too, as it doesn't produce any false positives on any cards I have tested. Therefore let's assume that this value is good for all RV100 and RV200 chipset generations. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index f278f20ea12a..5fdc67bd25d9 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -662,6 +662,8 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc if (ASIC_IS_R300(rdev)) tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT); + else if (ASIC_IS_RV100(rdev)) + tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT); else tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT); From fc87f13b8dc73706ae06caf229a336965e9b44a6 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Wed, 24 Oct 2012 18:32:52 +0200 Subject: [PATCH 127/174] DRM/Radeon: On DVI-I use Load Detection when EDID is bogus. The Radeon driver uses the analog/digital flag to determine if the DAC or the TMDS encoder should be enabled on a DVI-I connector. If the EDID is bogus this flag is no longer reliable. This fix adds a fallback to DAC load detection to determine if anything is connected to the DAC. If not and a (bogus) EDID is found it assumes a digital display is connected. This works around problems with some crappy IPMI devices using Radeon ES1000. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 28 ++++++++++++++++------ 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 67cfc1795ecd..b884c362a8c2 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -941,7 +941,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) struct drm_mode_object *obj; int i; enum drm_connector_status ret = connector_status_disconnected; - bool dret = false; + bool dret = false, broken_edid = false; if (!force && radeon_check_hpd_status_unchanged(connector)) return connector->status; @@ -965,6 +965,9 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) ret = connector_status_disconnected; DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector)); radeon_connector->ddc_bus = NULL; + } else { + ret = connector_status_connected; + broken_edid = true; /* defer use_digital to later */ } } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -1047,13 +1050,24 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) encoder_funcs = encoder->helper_private; if (encoder_funcs->detect) { - if (ret != connector_status_connected) { - ret = encoder_funcs->detect(encoder, connector); - if (ret == connector_status_connected) { - radeon_connector->use_digital = false; + if (!broken_edid) { + if (ret != connector_status_connected) { + /* deal with analog monitors without DDC */ + ret = encoder_funcs->detect(encoder, connector); + if (ret == connector_status_connected) { + radeon_connector->use_digital = false; + } + if (ret != connector_status_disconnected) + radeon_connector->detected_by_load = true; } - if (ret != connector_status_disconnected) - radeon_connector->detected_by_load = true; + } else { + enum drm_connector_status lret; + /* assume digital unless load detected otherwise */ + radeon_connector->use_digital = true; + lret = encoder_funcs->detect(encoder, connector); + DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret); + if (lret == connector_status_connected) + radeon_connector->use_digital = false; } break; } From 74e4ca32a406a15efb24a6a6ecf84b4cdabfd4e7 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Wed, 24 Oct 2012 16:42:26 +0200 Subject: [PATCH 128/174] drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // Signed-off-by: Peter Senna Tschudin Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 30271b641913..95e6318b6268 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -264,7 +264,7 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p, /* macro tile width & height */ palign = (8 * surf->bankw * track->npipes) * surf->mtilea; halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea; - mtileb = (palign / 8) * (halign / 8) * tileb;; + mtileb = (palign / 8) * (halign / 8) * tileb; mtile_pr = surf->nbx / palign; mtile_ps = (mtile_pr * surf->nby) / halign; surf->layer_size = mtile_ps * mtileb * slice_pt; From dfdcbebc548ff14fd1a7029c95d060e0dd466469 Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Thu, 25 Oct 2012 17:09:00 +0400 Subject: [PATCH 129/174] drm/radeon: fix ATPX function documentation Fix a copy&pasted documentation. Signed-off-by: Igor Murzov Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 37f6a907aea4..15f5ded65e0c 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -352,9 +352,9 @@ static int radeon_atpx_switchto(enum vga_switcheroo_client_id id) } /** - * radeon_atpx_switchto - switch to the requested GPU + * radeon_atpx_power_state - power down/up the requested GPU * - * @id: GPU to switch to + * @id: GPU to power down/up * @state: requested power state (0 = off, 1 = on) * * Execute the necessary ATPX function to power down/up the discrete GPU From d038db86984977646815fff54c1be11bff6b9f5b Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:26 +0100 Subject: [PATCH 130/174] DRM/Radeon: Clean up code in TV DAC load detection. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- .../gpu/drm/radeon/radeon_legacy_encoders.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 5fdc67bd25d9..85a7307e05f8 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1425,7 +1425,8 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; - uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp; + uint32_t gpiopad_a = 0, pixclks_cntl, tmp; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1464,9 +1465,12 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0; - disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0; - disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); @@ -1476,16 +1480,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - if (ASIC_IS_R300(rdev)) - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; tmp |= RADEON_CRTC2_CRT2_ON | (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); @@ -1541,6 +1542,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder } else { WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); } + WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); return found; From 701337dc2711096e5288430599dcf07aac5876ab Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 30 Oct 2012 17:42:27 +0100 Subject: [PATCH 131/174] DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips. The RN50 has a TV DAC but only a single CRTC. For load detection this DAC is controlled by the primary CRTC. Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- .../gpu/drm/radeon/radeon_legacy_encoders.c | 62 ++++++++++++------- 1 file changed, 38 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 85a7307e05f8..3afed70306df 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1424,9 +1424,9 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder { struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl; + uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl; uint32_t gpiopad_a = 0, pixclks_cntl, tmp; - uint32_t disp_output_cntl = 0, disp_hw_debug = 0; + uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0; enum drm_connector_status found = connector_status_disconnected; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv; @@ -1465,13 +1465,18 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); - if (ASIC_IS_R300(rdev)) { - gpiopad_a = RREG32(RADEON_GPIOPAD_A); - disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + + if (rdev->flags & RADEON_SINGLE_CRTC) { + crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); } else { - disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + if (ASIC_IS_R300(rdev)) { + gpiopad_a = RREG32(RADEON_GPIOPAD_A); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + } else { + disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG); + } + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); } - crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL); dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL); dac_cntl2 = RREG32(RADEON_DAC_CNTL2); @@ -1480,19 +1485,24 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder | RADEON_PIX2CLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; - tmp |= RADEON_CRTC2_CRT2_ON | - (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); - WREG32(RADEON_CRTC2_GEN_CNTL, tmp); - - if (ASIC_IS_R300(rdev)) { - WREG32_P(RADEON_GPIOPAD_A, 1, ~1); - tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; - tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; - WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + if (rdev->flags & RADEON_SINGLE_CRTC) { + tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON; + WREG32(RADEON_CRTC_EXT_CNTL, tmp); } else { - tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; - WREG32(RADEON_DISP_HW_DEBUG, tmp); + tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK; + tmp |= RADEON_CRTC2_CRT2_ON | + (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT); + WREG32(RADEON_CRTC2_GEN_CNTL, tmp); + + if (ASIC_IS_R300(rdev)) { + WREG32_P(RADEON_GPIOPAD_A, 1, ~1); + tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK; + tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2; + WREG32(RADEON_DISP_OUTPUT_CNTL, tmp); + } else { + tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL; + WREG32(RADEON_DISP_HW_DEBUG, tmp); + } } tmp = RADEON_TV_DAC_NBLANK | @@ -1534,13 +1544,17 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder WREG32(RADEON_DAC_CNTL2, dac_cntl2); WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); - WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); - if (ASIC_IS_R300(rdev)) { - WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); - WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + if (rdev->flags & RADEON_SINGLE_CRTC) { + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); } else { - WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + if (ASIC_IS_R300(rdev)) { + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1); + } else { + WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug); + } } WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); From f8c4d701ae3477f41fdc95592caa476617988a53 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Mon, 29 Oct 2012 13:46:48 +0100 Subject: [PATCH 132/174] DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms(). On all dual CRTC GPUs the CRTC_CRT_ON in the RADEON_CRTC_EXT_CNTL register controls the CRTC of the primary DAC. Therefore it is set in the DAC DMPS function. This is different for GPU's with a single CRTC but a primary and a TV DAC: here it controls the single CRTC no matter where it is routed. Therefore we set it here. This avoids an elaborate on/off state tracking since both primary_dac_dpms() and tv_dac_dpms() functions would have to touch this bit. On single CRTC GPUs with just one DAC it's irrelevant where this bit is handled. agd5f: fix warning Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 15 +++++++++++++-- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 7 +++++-- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 5677a424b585..6857cb4efb76 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -295,6 +295,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; + uint32_t crtc_ext_cntl = 0; uint32_t mask; if (radeon_crtc->crtc_id) @@ -307,6 +308,16 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) RADEON_CRTC_VSYNC_DIS | RADEON_CRTC_HSYNC_DIS); + /* + * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC. + * Therefore it is set in the DAC DMPS function. + * This is different for GPU's with a single CRTC but a primary and a + * TV DAC: here it controls the single CRTC no matter where it is + * routed. Therefore we set it here. + */ + if (rdev->flags & RADEON_SINGLE_CRTC) + crtc_ext_cntl = RADEON_CRTC_CRT_ON; + switch (mode) { case DRM_MODE_DPMS_ON: radeon_crtc->enabled = true; @@ -317,7 +328,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl)); } drm_vblank_post_modeset(dev, radeon_crtc->crtc_id); radeon_crtc_load_lut(crtc); @@ -331,7 +342,7 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) else { WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN | RADEON_CRTC_DISP_REQ_EN_B)); - WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask); + WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl)); } radeon_crtc->enabled = false; /* adjust pm to dpms changes AFTER disabling crtcs */ diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3afed70306df..817392fc2d04 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -537,7 +537,9 @@ static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode break; } - WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); + /* handled in radeon_crtc_dpms() */ + if (!(rdev->flags & RADEON_SINGLE_CRTC)) + WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl); WREG32(RADEON_DAC_CNTL, dac_cntl); WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl); @@ -1095,7 +1097,8 @@ static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode) } else { if (is_tv) WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl); - else + /* handled in radeon_crtc_dpms() */ + else if (!(rdev->flags & RADEON_SINGLE_CRTC)) WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl); } From 6d9cdfc27115b5d4a32906b25a6b2f89920b0366 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 31 Oct 2012 11:51:03 -0400 Subject: [PATCH 133/174] drm/radeon: add load detection support for ext DAC on R200 (v2) The R200 asics use an external DAC for the secondary DAC. The current KMS code tries to use code for the integrated TV DAC for R200 which leads to unpredictable results since R200 does not have an integrated TV DAC. This patch ports the external DAC load detection support from the UMS driver to KMS. v2: fix typo in loop break logic Signed-off-by: Alex Deucher Reviewed-by: Egbert Eich --- .../gpu/drm/radeon/radeon_legacy_encoders.c | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 817392fc2d04..f5ba2241dacc 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1422,6 +1422,96 @@ static bool radeon_legacy_tv_detect(struct drm_encoder *encoder, return found; } +static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; + uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl; + uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c; + uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f; + uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp; + uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid; + bool found = false; + int i; + + /* save the regs we need */ + gpio_monid = RREG32(RADEON_GPIO_MONID); + fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL); + disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL); + crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL); + disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A); + disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B); + disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C); + disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D); + disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E); + disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F); + crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP); + crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP); + crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID); + crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID); + + tmp = RREG32(RADEON_GPIO_MONID); + tmp &= ~RADEON_GPIO_A_0; + WREG32(RADEON_GPIO_MONID, tmp); + + WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON | + RADEON_FP2_PANEL_FORMAT | + R200_FP2_SOURCE_SEL_TRANS_UNIT | + RADEON_FP2_DVO_EN | + R200_FP2_DVO_RATE_SEL_SDR)); + + WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX | + RADEON_DISP_TRANS_MATRIX_GRAPHICS)); + + WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN | + RADEON_CRTC2_DISP_REQ_EN_B)); + + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0); + + WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080); + + for (i = 0; i < 200; i++) { + tmp = RREG32(RADEON_GPIO_MONID); + if (tmp & RADEON_GPIO_Y_0) + found = true; + + if (found) + break; + + if (!drm_can_sleep()) + mdelay(1); + else + msleep(1); + } + + /* restore the regs we used */ + WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e); + WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f); + WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp); + WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp); + WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid); + WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid); + WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl); + WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl); + WREG32(RADEON_GPIO_MONID, gpio_monid); + + return found; +} + static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { @@ -1466,6 +1556,13 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder return connector_status_disconnected; } + /* R200 uses an external DAC for secondary DAC */ + if (rdev->family == CHIP_R200) { + if (radeon_legacy_ext_dac_detect(encoder, connector)) + found = connector_status_connected; + return found; + } + /* save the regs we need */ pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL); From 50f8d35de8ba4af311ea1176c534e8b73bb198e5 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 31 Oct 2012 22:30:54 +0000 Subject: [PATCH 134/174] ixgbe: PTP get_ts_info missing software support This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller CC: Stable [3.5] Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 56b20d17d0e4..116f0e901bee 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2673,6 +2673,9 @@ static int ixgbe_get_ts_info(struct net_device *dev, case ixgbe_mac_X540: case ixgbe_mac_82599EB: info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_HARDWARE | SOF_TIMESTAMPING_RX_HARDWARE | SOF_TIMESTAMPING_RAW_HARDWARE; From b457bcb97212c38154d941d88c13f5f63f3620d0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:52 +0000 Subject: [PATCH 135/174] bnx2x: Fix 57810 1G-KR link against certain switches. Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index e2e45ee5df33..290e12a8d024 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3545,12 +3545,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i; + u16 val16 = 0, lane, i, cl72_ctrl; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, @@ -3565,6 +3564,13 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); + cl72_ctrl &= 0xf8ff; + cl72_ctrl |= 0x3800; + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); + /* Check adding advertisement for 1G KX */ if (((vars->line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || From a75bb0010026f39910cd01d33a5baa47191539a0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:53 +0000 Subject: [PATCH 136/174] bnx2x: Fix link down in 57712 following LFA In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 23 +++++++++++++++---- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 290e12a8d024..f2436ea641a6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3295,6 +3295,21 @@ static void bnx2x_serdes_deassert(struct bnx2x *bp, u8 port) DEFAULT_PHY_DEV_ADDR); } +static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy, + struct link_params *params, + u32 action) +{ + struct bnx2x *bp = params->bp; + switch (action) { + case PHY_INIT: + /* Set correct devad */ + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); + REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18, + phy->def_md_devad); + break; + } +} + static void bnx2x_xgxs_deassert(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -3309,10 +3324,8 @@ static void bnx2x_xgxs_deassert(struct link_params *params) REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); udelay(500); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); - - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0); - REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, - params->phy[INT_PHY].def_md_devad); + bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params, + PHY_INIT); } static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, @@ -10999,7 +11012,7 @@ static struct bnx2x_phy phy_xgxs = { .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, .set_link_led = (set_link_led_t)NULL, - .phy_specific_func = (phy_specific_func_t)NULL + .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func }; static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, From cd1a26a3bbc797100c55594bac0546204ccb1107 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:54 +0000 Subject: [PATCH 137/174] bnx2x: Restore global registers back to default. Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 78 +++++++++++++------ 1 file changed, 56 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index f2436ea641a6..5e8f7b7a8f65 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3558,13 +3558,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 val16 = 0, lane, i, cl72_ctrl; + u16 lane, i, cl72_ctrl, an_adv = 0; + u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff}, - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555}, {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, @@ -3589,7 +3587,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || (vars->line_speed == SPEED_1000)) { u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; - val16 |= (1<<5); + an_adv |= (1<<5); /* Enable CL37 1G Parallel Detect */ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1); @@ -3599,11 +3597,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || (vars->line_speed == SPEED_10000)) { /* Check adding advertisement for 10G KR */ - val16 |= (1<<7); + an_adv |= (1<<7); /* Enable 10G Parallel Detect */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 1); - + bnx2x_set_aer_mmd(params, phy); DP(NETIF_MSG_LINK, "Advertize 10G\n"); } @@ -3623,7 +3624,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertised speeds */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, - MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv); /* Advertised and set FEC (Forward Error Correction) */ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, @@ -3647,9 +3648,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 */ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &val16); - if (val16 < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around\n"); + MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); + if (ucode_ver < 0xd108) { + DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", + ucode_ver); vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; } bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, @@ -3670,21 +3672,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u16 i; + u16 val16, i, lane; static struct bnx2x_reg_set reg_set[] = { /* Disable Autoneg */ {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, - {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0}, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0x3f00}, {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0}, {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, - /* Disable CL36 PCS Tx */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0}, - /* Double Wide Single Data Rate @ pll rate */ - {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF}, /* Leave cl72 training enable, needed for KR */ {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150, @@ -3695,11 +3692,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); - /* Leave CL72 enabled */ - bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, - 0x3800); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Global registers */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 &= ~(0x0011 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 |= (0x0303 << (lane << 1)); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); /* Set speed via PMA/PMD register */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); @@ -4322,7 +4332,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u16 val16; + u16 val16, lane; bnx2x_sfp_e3_set_transmitter(params, phy, 0); bnx2x_set_mdio_clk(bp, params->chip_id, params->port); bnx2x_set_aer_mmd(params, phy); @@ -4359,6 +4369,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy, MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16 & 0xff00); + lane = bnx2x_get_warpcore_lane(phy, params); + /* Disable CL36 PCS Tx */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 |= (0x11 << lane); + if (phy->flags & FLAGS_WC_DUAL_MODE) + val16 |= (0x22 << lane); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 &= ~(0x0303 << (lane << 1)); + val16 |= (0x0101 << (lane << 1)); + if (phy->flags & FLAGS_WC_DUAL_MODE) { + val16 &= ~(0x0c0c << (lane << 1)); + val16 |= (0x0404 << (lane << 1)); + } + + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + bnx2x_set_aer_mmd(params, phy); + } static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy, From 4978140c38958b15b3b95a49bda688723fa014eb Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:55 +0000 Subject: [PATCH 138/174] bnx2x: Fix potential incorrect link speed provision Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 ++++++++++--------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 5e8f7b7a8f65..308ba42dfd56 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -137,7 +137,16 @@ #define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD #define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD - +#define LINK_UPDATE_MASK \ + (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \ + LINK_STATUS_LINK_UP | \ + LINK_STATUS_PHYSICAL_LINK_FLAG | \ + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \ + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \ + LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \ + LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) #define SFP_EEPROM_CON_TYPE_ADDR 0x2 #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 @@ -6349,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params, vars->mac_type = MAC_TYPE_NONE; /* Update shared memory */ - vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | - LINK_STATUS_LINK_UP | - LINK_STATUS_PHYSICAL_LINK_FLAG | - LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | - LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | - LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | - LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | - LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE); + vars->link_status &= ~LINK_UPDATE_MASK; vars->line_speed = 0; bnx2x_update_mng(params, vars->link_status); @@ -6505,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; u8 active_external_phy = INT_PHY; vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_UPDATE_MASK; for (phy_index = INT_PHY; phy_index < params->num_phys; phy_index++) { phy_vars[phy_index].flow_ctrl = 0; From e82041df5d0a85457880fbbe00da057443b3fcc0 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:56 +0000 Subject: [PATCH 139/174] bnx2x: Fix unrecognized SFP+ module after driver is loaded When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 22 +++++++++++++------ 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 308ba42dfd56..679d45e09805 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -7634,7 +7634,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params, static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, - u8 *o_buf) + u8 *o_buf, u8 is_init) { int rc = 0; u8 i, j = 0, cnt = 0; @@ -7651,10 +7651,10 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { - if (cnt == I2C_WA_PWR_ITER) { + if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) { bnx2x_warpcore_power_module(params, phy, 0); /* Note that 100us are not enough here */ - usleep_range(1000,1000); + usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, phy, 1); } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, @@ -7774,7 +7774,7 @@ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); + byte_cnt, o_buf, 0); break; } return rc; @@ -7978,6 +7978,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, { u8 val; + int rc; struct bnx2x *bp = params->bp; u16 timeout; /* Initialization time after hot-plug may take up to 300ms for @@ -7985,8 +7986,14 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, */ for (timeout = 0; timeout < 60; timeout++) { - if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) - == 0) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, + params, 1, + 1, &val, 1); + else + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, + &val); + if (rc == 0) { DP(NETIF_MSG_LINK, "SFP+ module initialization took %d ms\n", timeout * 5); @@ -7994,7 +8001,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, } usleep_range(5000, 10000); } - return -EINVAL; + rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val); + return rc; } static void bnx2x_8727_power_module(struct bnx2x *bp, From 03c31488a084b344cd04bb853db97706143327b9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 31 Oct 2012 05:46:57 +0000 Subject: [PATCH 140/174] bnx2x: Fix no link on 577xx 10G-baseT Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 679d45e09805..6dd0dd076cc5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -11528,6 +11528,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_BASE_T; break; case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->supported &= (SUPPORTED_1000baseT_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); phy->media_type = ETH_PHY_XFP_FIBER; break; case PORT_HW_CFG_NET_SERDES_IF_SFI: From 477864ddd36510e9802c2adb6d9445c2d7783fe5 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Wed, 31 Oct 2012 05:46:58 +0000 Subject: [PATCH 141/174] bnx2x: Disable FCoE for 57840 since not yet supported by FW Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index d5648fc666bd..f23e8c022954 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11902,7 +11902,15 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, /* disable FCOE L2 queue for E1x */ if (CHIP_IS_E1x(bp)) bp->flags |= NO_FCOE_FLAG; - + /* disable FCOE for 57840 device, until FW supports it */ + switch (ent->driver_data) { + case BCM57840_O: + case BCM57840_4_10: + case BCM57840_2_20: + case BCM57840_MFO: + case BCM57840_MF: + bp->flags |= NO_FCOE_FLAG; + } #endif From d24bab93e42b1f90d89c86b3edbb81ec34bb9474 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Thu, 1 Nov 2012 11:21:53 -0400 Subject: [PATCH 142/174] SUNRPC: return proper errno from backchannel_rqst The one and only caller (in fs/nfs/nfs4client.c) uses the result as an errno and would have interpreted an error as EPERM. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- net/sunrpc/backchannel_rqst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c index 5a3d675d2f2f..a9c0bbccad6b 100644 --- a/net/sunrpc/backchannel_rqst.c +++ b/net/sunrpc/backchannel_rqst.c @@ -172,7 +172,7 @@ out_free: xprt_free_allocation(req); dprintk("RPC: setup backchannel transport failed\n"); - return -1; + return -ENOMEM; } EXPORT_SYMBOL_GPL(xprt_setup_backchannel); From eb6e98a1b25fb0f347fece9814257a9e1cb537c8 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 04:42:51 +0000 Subject: [PATCH 143/174] bonding: fix off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary; Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index dc15d248443f..238d9b3e2252 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1060,7 +1060,7 @@ static ssize_t bonding_store_primary(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing primary */ if (!strlen(ifname) || buf[0] == '\n') { From c84e1590d149cfc885062e938944941f33e69f38 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Wed, 31 Oct 2012 06:03:52 +0000 Subject: [PATCH 144/174] bonding: fix second off-by-one error Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave; Signed-off-by: Nikolay Aleksandrov Note: Sorry for the second patch but I missed this one while checking the file. You can squash them into one patch. Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 238d9b3e2252..ef8d2a080d17 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1237,7 +1237,7 @@ static ssize_t bonding_store_active_slave(struct device *d, goto out; } - sscanf(buf, "%16s", ifname); /* IFNAMSIZ */ + sscanf(buf, "%15s", ifname); /* IFNAMSIZ */ /* check to see if we are clearing active */ if (!strlen(ifname) || buf[0] == '\n') { From d3e9a1dc7c34c3c5a253091289a54883bf27f6ba Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 31 Oct 2012 05:48:19 +0000 Subject: [PATCH 145/174] net: sctp: Fix typo in net/sctp Correct spelling typo in net/sctp/socket.c Signed-off-by: Masanari Iida Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 59d16ea927f0..a60d1f8b41c5 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -974,7 +974,7 @@ SCTP_STATIC int sctp_setsockopt_bindx(struct sock* sk, void *addr_buf; struct sctp_af *af; - SCTP_DEBUG_PRINTK("sctp_setsocktopt_bindx: sk %p addrs %p" + SCTP_DEBUG_PRINTK("sctp_setsockopt_bindx: sk %p addrs %p" " addrs_size %d opt %d\n", sk, addrs, addrs_size, op); if (unlikely(addrs_size <= 0)) From 8f363b77ee4fbf7c3bbcf5ec2c5ca482d396d664 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Wed, 31 Oct 2012 02:45:32 +0000 Subject: [PATCH 146/174] net: fix divide by zero in tcp algorithm illinois Reading TCP stats when using TCP Illinois congestion control algorithm can cause a divide by zero kernel oops. The division by zero occur in tcp_illinois_info() at: do_div(t, ca->cnt_rtt); where ca->cnt_rtt can become zero (when rtt_reset is called) Steps to Reproduce: 1. Register tcp_illinois: # sysctl -w net.ipv4.tcp_congestion_control=illinois 2. Monitor internal TCP information via command "ss -i" # watch -d ss -i 3. Establish new TCP conn to machine Either it fails at the initial conn, or else it needs to wait for a loss or a reset. This is only related to reading stats. The function avg_delay() also performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its calling point in update_params(). Thus, simply fix tcp_illinois_info(). Function tcp_illinois_info() / get_info() is called without socket lock. Thus, eliminate any race condition on ca->cnt_rtt by using a local stack variable. Simply reuse info.tcpv_rttcnt, as its already set to ca->cnt_rtt. Function avg_delay() is not affected by this race condition, as its called with the socket lock. Cc: Petr Matousek Signed-off-by: Jesper Dangaard Brouer Acked-by: Eric Dumazet Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_illinois.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c index 813b43a76fec..834857f3c871 100644 --- a/net/ipv4/tcp_illinois.c +++ b/net/ipv4/tcp_illinois.c @@ -313,11 +313,13 @@ static void tcp_illinois_info(struct sock *sk, u32 ext, .tcpv_rttcnt = ca->cnt_rtt, .tcpv_minrtt = ca->base_rtt, }; - u64 t = ca->sum_rtt; - do_div(t, ca->cnt_rtt); - info.tcpv_rtt = t; + if (info.tcpv_rttcnt > 0) { + u64 t = ca->sum_rtt; + do_div(t, info.tcpv_rttcnt); + info.tcpv_rtt = t; + } nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info); } } From 2c42a3fb30845867bfcaf0747ff50c1375884ff2 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Tue, 30 Oct 2012 12:03:09 +0000 Subject: [PATCH 147/174] tcp: Fix double sizeof in new tcp_metrics code Fix double sizeof when parsing IPv6 address from user space because it breaks get/del by specific IPv6 address. Problem noticed by David Binderman: https://bugzilla.kernel.org/show_bug.cgi?id=49171 Signed-off-by: Julian Anastasov Signed-off-by: David S. Miller --- net/ipv4/tcp_metrics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c index 4c752a6e0bcd..53bc5847bfa8 100644 --- a/net/ipv4/tcp_metrics.c +++ b/net/ipv4/tcp_metrics.c @@ -864,7 +864,7 @@ static int parse_nl_addr(struct genl_info *info, struct inetpeer_addr *addr, } a = info->attrs[TCP_METRICS_ATTR_ADDR_IPV6]; if (a) { - if (nla_len(a) != sizeof(sizeof(struct in6_addr))) + if (nla_len(a) != sizeof(struct in6_addr)) return -EINVAL; addr->family = AF_INET6; memcpy(addr->addr.a6, nla_data(a), sizeof(addr->addr.a6)); From f9b1ef5f06d65a01952169b67d474f7f0dcb0206 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Oct 2012 16:48:40 -0400 Subject: [PATCH 148/174] NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctly Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8cfbac1a8d5e..091baab3eccf 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5677,7 +5677,7 @@ static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl, tbl->slots = new; tbl->max_slots = max_slots; } - tbl->highest_used_slotid = -1; /* no slot is currently used */ + tbl->highest_used_slotid = NFS4_NO_SLOT; for (i = 0; i < tbl->max_slots; i++) tbl->slots[i].seq_nr = ivalue; spin_unlock(&tbl->slot_tbl_lock); From eaa7cc60f7dff5e74ef387ace8228235fab8241b Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Thu, 1 Nov 2012 23:55:43 +0000 Subject: [PATCH 149/174] hwmon: Only include of_match_table with CONFIG_OF_GPIO The following fixes build errors on sparc. Without any DT support, of_match_ptr is NULL and the below is a no-op. However, if just CONFIG_OF is defined then so is of_match_ptr. All useful parts of the gpio-fan DT support rely on CONFIG_OF_GPIO anyway, so of_match_table should too. Signed-off-by: Jamie Lentin Signed-off-by: Guenter Roeck --- drivers/hwmon/gpio-fan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 36509ae32083..1381a2e3bbd4 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -630,7 +630,9 @@ static struct platform_driver gpio_fan_driver = { .driver = { .name = "gpio-fan", .pm = GPIO_FAN_PM, +#ifdef CONFIG_OF_GPIO .of_match_table = of_match_ptr(of_gpio_fan_match), +#endif }, }; From 3916e1d71b62b120888aa50bcc8d9a6200fc19a7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 1 Nov 2012 13:47:09 +1000 Subject: [PATCH 150/174] drm/udl: fix stride issues scanning out stride != width*bpp When buffer sharing with the i915 and using a 1680x1050 monitor, the i915 gives is a 6912 buffer for the 6720 width, the code doesn't render this properly as it uses one value to set the base address for reading from the vmap and for where to start on the device. This fixes it by calculating the values correctly for the device and for the pixmap. No idea how I haven't seen this before now. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_drv.h | 2 +- drivers/gpu/drm/udl/udl_fb.c | 12 +++++++----- drivers/gpu/drm/udl/udl_transfer.c | 5 +++-- 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h index fccd361f7b50..87aa5f5d3c88 100644 --- a/drivers/gpu/drm/udl/udl_drv.h +++ b/drivers/gpu/drm/udl/udl_drv.h @@ -104,7 +104,7 @@ udl_fb_user_fb_create(struct drm_device *dev, int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, u32 byte_width, int *ident_ptr, int *sent_ptr); int udl_dumb_create(struct drm_file *file_priv, diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index 69a2b16f42a6..d4ab3beaada0 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -114,9 +114,10 @@ static void udlfb_dpy_deferred_io(struct fb_info *info, list_for_each_entry(cur, &fbdefio->pagelist, lru) { if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8), - &urb, (char *) info->fix.smem_start, - &cmd, cur->index << PAGE_SHIFT, - PAGE_SIZE, &bytes_identical, &bytes_sent)) + &urb, (char *) info->fix.smem_start, + &cmd, cur->index << PAGE_SHIFT, + cur->index << PAGE_SHIFT, + PAGE_SIZE, &bytes_identical, &bytes_sent)) goto error; bytes_rendered += PAGE_SIZE; } @@ -187,10 +188,11 @@ int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, for (i = y; i < y + height ; i++) { const int line_offset = fb->base.pitches[0] * i; const int byte_offset = line_offset + (x * bpp); - + const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp); if (udl_render_hline(dev, bpp, &urb, (char *) fb->obj->vmapping, - &cmd, byte_offset, width * bpp, + &cmd, byte_offset, dev_byte_offset, + width * bpp, &bytes_identical, &bytes_sent)) goto error; } diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c index dc095526ffb7..142fee5f983f 100644 --- a/drivers/gpu/drm/udl/udl_transfer.c +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -213,11 +213,12 @@ static void udl_compress_hline16( */ int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, const char *front, char **urb_buf_ptr, - u32 byte_offset, u32 byte_width, + u32 byte_offset, u32 device_byte_offset, + u32 byte_width, int *ident_ptr, int *sent_ptr) { const u8 *line_start, *line_end, *next_pixel; - u32 base16 = 0 + (byte_offset / bpp) * 2; + u32 base16 = 0 + (device_byte_offset / bpp) * 2; struct urb *urb = *urb_ptr; u8 *cmd = *urb_buf_ptr; u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length; From 82fa63bd6b87969dfde0139dbede243380b087d6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Oct 2012 11:55:16 +0100 Subject: [PATCH 151/174] i2c: mxs: remove broken PIOQUEUE support This I2C master can do DMA and PIOQUEUE (PIO with FIFO). Originally, only PIOQUEUE was supported and it had issues, then DMA support was added this cycle. The original intention was to keep PIOQUEUE since it has less overhead what is nice for small transfers. However, runtime switching between PIOQEUE and DMA depending on the transfer size never worked despite a lot of trying. Since PIOQUEUE mode itself was flaky (polling at places where interrupts failed to work) and the implementation also imposed a size limit for transfers, it is best to remove the support, so users don't fall over its limitations. It also makes the driver a lot cleaner and more robust. If somebody really wants less overhead, plain PIO mode could still be implemented with the addidtional advantage that this mode is also available on MX23, too. Signed-off-by: Wolfram Sang Reviewed-by: Marek Vasut --- drivers/i2c/busses/i2c-mxs.c | 186 +++-------------------------------- 1 file changed, 14 insertions(+), 172 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1f58197062cf..286ca1917820 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -1,7 +1,7 @@ /* * Freescale MXS I2C bus driver * - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K. * * based on a (non-working) driver which was: * @@ -35,10 +35,6 @@ #define DRIVER_NAME "mxs-i2c" -static bool use_pioqueue; -module_param(use_pioqueue, bool, 0); -MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); - #define MXS_I2C_CTRL0 (0x00) #define MXS_I2C_CTRL0_SET (0x04) @@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA"); MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ MXS_I2C_CTRL1_SLAVE_IRQ) -#define MXS_I2C_QUEUECTRL (0x60) -#define MXS_I2C_QUEUECTRL_SET (0x64) -#define MXS_I2C_QUEUECTRL_CLR (0x68) - -#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 -#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 - -#define MXS_I2C_QUEUESTAT (0x70) -#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 -#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F - -#define MXS_I2C_QUEUECMD (0x80) - -#define MXS_I2C_QUEUEDATA (0x90) - -#define MXS_I2C_DATA (0xa0) - #define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ MXS_I2C_CTRL0_PRE_SEND_START | \ @@ -153,7 +132,6 @@ struct mxs_i2c_dev { const struct mxs_i2c_speed_config *speed; /* DMA support components */ - bool dma_mode; int dma_channel; struct dma_chan *dmach; struct mxs_dma_data dma_data; @@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); - if (i2c->dma_mode) - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); - else - writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, - i2c->regs + MXS_I2C_QUEUECTRL_SET); -} - -static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, - int flags) -{ - u32 data; - - writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); - - data = (addr << 1) | I2C_SMBUS_READ; - writel(data, i2c->regs + MXS_I2C_DATA); - - data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); -} - -static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, - u8 addr, u8 *buf, int len, int flags) -{ - u32 data; - int i, shifts_left; - - data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; - writel(data, i2c->regs + MXS_I2C_QUEUECMD); - - /* - * We have to copy the slave address (u8) and buffer (arbitrary number - * of u8) into the data register (u32). To achieve that, the u8 are put - * into the MSBs of 'data' which is then shifted for the next u8. When - * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 - * looks like this: - * - * 3 2 1 0 - * 10987654|32109876|54321098|76543210 - * --------+--------+--------+-------- - * buffer+2|buffer+1|buffer+0|slave_addr - */ - - data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; - - for (i = 0; i < len; i++) { - data >>= 8; - data |= buf[i] << 24; - if ((i & 3) == 2) - writel(data, i2c->regs + MXS_I2C_DATA); - } - - /* Write out the remaining bytes if any */ - shifts_left = 24 - (i & 3) * 8; - if (shifts_left) - writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); -} - -/* - * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the - * rd_threshold to 1). Couldn't get this to work, though. - */ -static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - - while (readl(i2c->regs + MXS_I2C_QUEUESTAT) - & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { - if (time_after(jiffies, timeout)) - return -ETIMEDOUT; - cond_resched(); - } - - return 0; -} - -static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) -{ - u32 uninitialized_var(data); - int i; - - for (i = 0; i < len; i++) { - if ((i & 3) == 0) { - if (mxs_i2c_wait_for_data(i2c)) - return -ETIMEDOUT; - data = readl(i2c->regs + MXS_I2C_QUEUEDATA); - } - buf[i] = data & 0xff; - data >>= 8; - } - - return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, init_completion(&i2c->cmd_complete); i2c->cmd_err = 0; - if (i2c->dma_mode) { - ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); - if (ret) - return ret; - } else { - if (msg->flags & I2C_M_RD) { - mxs_i2c_pioq_setup_read(i2c, msg->addr, - msg->len, flags); - } else { - mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, - msg->len, flags); - } - - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_SET); - } + ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); + if (ret) + return ret; ret = wait_for_completion_timeout(&i2c->cmd_complete, msecs_to_jiffies(1000)); if (ret == 0) goto timeout; - if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) { - ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); - if (ret) - goto timeout; - } - if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); - else - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); - if (i2c->dma_mode) - mxs_i2c_dma_finish(i2c); + mxs_i2c_dma_finish(i2c); mxs_i2c_reset(i2c); return -ETIMEDOUT; } @@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; - bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - if (!i2c->dma_mode) { - is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & - MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; - - if (is_last_cmd || i2c->cmd_err) - complete(&i2c->cmd_complete); - } - writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); return IRQ_HANDLED; @@ -555,15 +408,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; - /* - * The MXS I2C DMA mode is prefered and enabled by default. - * The PIO mode is still supported, but should be used only - * for debuging purposes etc. - */ - i2c->dma_mode = !use_pioqueue; - if (!i2c->dma_mode) - dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n"); - /* * TODO: This is a temporary solution and should be changed * to use generic DMA binding later when the helpers get in. @@ -571,8 +415,8 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) ret = of_property_read_u32(node, "fsl,i2c-dma-channel", &i2c->dma_channel); if (ret) { - dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n"); - i2c->dma_mode = 0; + dev_err(dev, "Failed to get DMA channel!\n"); + return -ENODEV; } ret = of_property_read_u32(node, "clock-frequency", &speed); @@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) } /* Setup the DMA */ - if (i2c->dma_mode) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - i2c->dma_data.chan_irq = dmairq; - i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); - if (!i2c->dmach) { - dev_err(dev, "Failed to request dma\n"); - return -ENODEV; - } + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + i2c->dma_data.chan_irq = dmairq; + i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c); + if (!i2c->dmach) { + dev_err(dev, "Failed to request dma\n"); + return -ENODEV; } platform_set_drvdata(pdev, i2c); From 817315f57408b1a9c78cbc7ff2bf186da45ddcc1 Mon Sep 17 00:00:00 2001 From: Philippe Begnic Date: Wed, 10 Oct 2012 13:02:26 +0200 Subject: [PATCH 152/174] i2c-nomadik: Fixup clock handling Make sure to clk_prepare as well as clk_enable. Signed-off-by: Philippe Begnic Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-nomadik.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 698d7acb0f08..02c3115a2dfa 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, pm_runtime_get_sync(&dev->adev->dev); - clk_enable(dev->clk); + status = clk_prepare_enable(dev->clk); + if (status) { + dev_err(&dev->adev->dev, "can't prepare_enable clock\n"); + goto out_clk; + } status = init_hw(dev); if (status) @@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, } out: - clk_disable(dev->clk); + clk_disable_unprepare(dev->clk); +out_clk: pm_runtime_put_sync(&dev->adev->dev); dev->busy = false; From 91b370a0dbda5de92c2cf4c3bc0d18d6bf08f05f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 1 Nov 2012 22:08:14 +0530 Subject: [PATCH 153/174] i2c: tegra: set irq name as device name When watching the irqs name of tegra i2c, all instances irq name shows as tegra_i2c. Passing the device name properly to have the irq names with instance like tegra-i2c.0, tegra-i2c.1 etc. Signed-off-by: Laxman Dewangan Acked-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index f981ac4e6783..dcea77bf6f50 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, - tegra_i2c_isr, 0, pdev->name, i2c_dev); + tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); return ret; From a5788caa269e446201018bb8879a1dd90f41d32b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: [PATCH 154/174] FRV: Add missing linux/export.h #inclusions Add missing linux/export.h #inclusions to the FRV arch. Signed-off-by: David Howells --- arch/frv/mb93090-mb00/pci-dma-nommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index e47857f889b6..b99c2a7cc7a4 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include From 5f0231d97b2d361292b090b81479a68123010376 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: [PATCH 155/174] FRV: Don't objcopy the GNU build_id note Don't let objcopy transfer the GNU build_id note into the loadable image as it is located at address 0 and the image ends up >3G in size. Signed-off-by: David Howells --- arch/frv/boot/Makefile | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/frv/boot/Makefile b/arch/frv/boot/Makefile index 6ae3254da019..636d5bbcd53f 100644 --- a/arch/frv/boot/Makefile +++ b/arch/frv/boot/Makefile @@ -17,6 +17,8 @@ PARAMS_PHYS = 0x0207c000 INITRD_PHYS = 0x02180000 INITRD_VIRT = 0x02180000 +OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment + # # If you don't define ZRELADDR above, # then it defaults to ZTEXTADDR @@ -32,18 +34,18 @@ Image: $(obj)/Image targets: $(obj)/Image $(obj)/Image: vmlinux FORCE - $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@ #$(obj)/Image: $(CONFIGURE) $(SYSTEM) -# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@ +# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@ bzImage: zImage zImage: $(CONFIGURE) compressed/$(LINUX) - $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@ bootpImage: bootp/bootp - $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@ + $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@ compressed/$(LINUX): $(LINUX) dep @$(MAKE) -C compressed $(LINUX) From eded09ccf58ab00474ccde547dd525c75dbc28fd Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: [PATCH 156/174] FRV: gcc-4.1.2 also inlines weak functions gcc-4.1.2 inlines weak functions, which causes FRV to fail when the dummy thread_info_cache_init() gets inlined into start_kernel(). Signed-off-by: David Howells --- init/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/init/main.c b/init/main.c index 9cf77ab138a6..e33e09df3cbc 100644 --- a/init/main.c +++ b/init/main.c @@ -442,9 +442,11 @@ void __init __weak smp_setup_processor_id(void) { } +# if THREAD_SIZE >= PAGE_SIZE void __init __weak thread_info_cache_init(void) { } +#endif /* * Set up kernel memory allocators From 1ee6f5669a7eaba0e2f4e0dd0599b56eb8a9a090 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:42 +0000 Subject: [PATCH 157/174] FRV: Fix the preemption handling Fix the preemption handling in FRV code where the PREEMPT_ACTIVE value is incorrectly loaded into the threadinfo flags rather than the threadinfo preemption count. Unfortunately, the code cannot be simply converted to use preempt_schedule_irq() as is because FRV uses virtual interrupt disablement to cut down on the cost of actually disabling interrupts and thus local_irq_enable() doesn't actually enable interrupts. Reported-by: Al Viro Signed-off-by: David Howells cc: Al Viro --- arch/frv/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index ee0beb354e4d..d64c52627961 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1086,7 +1086,7 @@ __entry_preempt_need_resched: beq icc0,#1,__entry_return_direct setlos #PREEMPT_ACTIVE,gr5 - sti gr5,@(gr15,#TI_FLAGS) + sti gr5,@(gr15,#TI_PRE_COUNT) andi gr23,#~PSR_PIL,gr23 movgs gr23,psr From e7aa51b2e52274b13be3209e2787d1b2ce9624fd Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 2 Nov 2012 13:20:43 +0000 Subject: [PATCH 158/174] FRV: Fix the new-style kernel_thread() stuff The kernel_thread() changes for FRV don't work, and FRV fails to boot, starting with: commit 02ce496f152df87be081a64796498942c433a2fd Author: Al Viro Date: Tue Sep 18 22:18:51 2012 -0400 Subject: frv: split ret_from_fork, simplify kernel_thread() a lot The problem is that the userspace registers are completely cleared when a kernel thread is created and all subsequent user threads are then copied from that. Unfortunately, however, the TBR and PSR registers are restored from the pt_regs and the values they should be set to are clobbered by the memset. Instead, copy across the old user registers as normal, and then merely alter GR8 and GR9 in it if we're going to execute a kernel thread. Signed-off-by: David Howells --- arch/frv/kernel/process.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index e1e3aa196aa4..7e33215f1d8f 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags, childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE); + /* set up the userspace frame (the only place that the USP is stored) */ + *childregs = *__kernel_frame0_ptr; + p->set_child_tid = p->clear_child_tid = NULL; p->thread.frame = childregs; @@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags, p->thread.frame0 = childregs; if (unlikely(!regs)) { - memset(childregs, 0, sizeof(struct pt_regs)); childregs->gr9 = usp; /* function */ childregs->gr8 = arg; - childregs->psr = PSR_S; p->thread.pc = (unsigned long) ret_from_kernel_thread; save_user_regs(p->thread.user); return 0; From 7b7ade117951dcc5ec947595ea7ff622fa56895e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 15 Oct 2012 10:53:17 -0400 Subject: [PATCH 159/174] frv: switch to saner kernel_execve() semantics Signed-off-by: Al Viro --- arch/frv/Kconfig | 1 + arch/frv/include/asm/unistd.h | 1 - arch/frv/kernel/entry.S | 5 ----- 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index b7412504f08a..df2eb4bd9fa2 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -13,6 +13,7 @@ config FRV select GENERIC_CPU_DEVICES select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE config ZONE_DMA bool diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 266a5b25a0c1..2358634cacca 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -30,7 +30,6 @@ #define __ARCH_WANT_SYS_RT_SIGACTION #define __ARCH_WANT_SYS_RT_SIGSUSPEND #define __ARCH_WANT_SYS_EXECVE -#define __ARCH_WANT_KERNEL_EXECVE /* * "Conditional" syscalls diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index d64c52627961..b1cd7e8145bb 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -869,11 +869,6 @@ ret_from_kernel_thread: call schedule_tail calll.p @(gr21,gr0) or gr20,gr20,gr8 - bra sys_exit - - .globl ret_from_kernel_execve -ret_from_kernel_execve: - ori gr28,0,sp bra __syscall_exit ################################################################################################### From 1d72d9f83df057e71c7951def41138a0230bf737 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 2 Nov 2012 12:05:44 -0400 Subject: [PATCH 160/174] frv: fix the broken preempt Just get %icc2 into the state we would have after local_irq_disable() and physical IRQ having happened since then. Then we can simply use preempt_schedule_irq() and be done with the whole mess. Acked-by: David Howells Signed-off-by: Al Viro --- arch/frv/kernel/entry.S | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index b1cd7e8145bb..dfcd263c0517 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1075,27 +1075,10 @@ __entry_return_from_kernel_interrupt: subicc gr5,#0,gr0,icc0 beq icc0,#0,__entry_return_direct -__entry_preempt_need_resched: - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0 - beq icc0,#1,__entry_return_direct - - setlos #PREEMPT_ACTIVE,gr5 - sti gr5,@(gr15,#TI_PRE_COUNT) - - andi gr23,#~PSR_PIL,gr23 - movgs gr23,psr - - call schedule - sti gr0,@(gr15,#TI_PRE_COUNT) - - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - bra __entry_preempt_need_resched -#else - bra __entry_return_direct + subcc gr0,gr0,gr0,icc2 /* set Z and clear C */ + call preempt_schedule_irq #endif + bra __entry_return_direct ############################################################################### From d9b482c8ba1973a189f2d4c8175d405b87fbf2d7 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 30 Oct 2012 14:45:57 -0400 Subject: [PATCH 161/174] hashtable: introduce a small and naive hashtable This hashtable implementation is using hlist buckets to provide a simple hashtable to prevent it from getting reimplemented all over the kernel. Signed-off-by: Sasha Levin [ Merging this now, so that subsystems can start applying Sasha's patches that use this - Linus ] Signed-off-by: Linus Torvalds --- include/linux/hashtable.h | 192 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 include/linux/hashtable.h diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h new file mode 100644 index 000000000000..227c62424f3c --- /dev/null +++ b/include/linux/hashtable.h @@ -0,0 +1,192 @@ +/* + * Statically sized hash table implementation + * (C) 2012 Sasha Levin + */ + +#ifndef _LINUX_HASHTABLE_H +#define _LINUX_HASHTABLE_H + +#include +#include +#include +#include +#include + +#define DEFINE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] = \ + { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT } + +#define DECLARE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] + +#define HASH_SIZE(name) (ARRAY_SIZE(name)) +#define HASH_BITS(name) ilog2(HASH_SIZE(name)) + +/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */ +#define hash_min(val, bits) \ + (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)) + +static inline void __hash_init(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + INIT_HLIST_HEAD(&ht[i]); +} + +/** + * hash_init - initialize a hash table + * @hashtable: hashtable to be initialized + * + * Calculates the size of the hashtable from the given parameter, otherwise + * same as hash_init_size. + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_add - add an object to a hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add(hashtable, node, key) \ + hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_add_rcu - add an object to a rcu enabled hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add_rcu(hashtable, node, key) \ + hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_hashed - check whether an object is in any hashtable + * @node: the &struct hlist_node of the object to be checked + */ +static inline bool hash_hashed(struct hlist_node *node) +{ + return !hlist_unhashed(node); +} + +static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + if (!hlist_empty(&ht[i])) + return false; + + return true; +} + +/** + * hash_empty - check whether a hashtable is empty + * @hashtable: hashtable to check + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_del - remove an object from a hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del(struct hlist_node *node) +{ + hlist_del_init(node); +} + +/** + * hash_del_rcu - remove an object from a rcu enabled hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del_rcu(struct hlist_node *node) +{ + hlist_del_init_rcu(node); +} + +/** + * hash_for_each - iterate over a hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry(obj, node, &name[bkt], member) + +/** + * hash_for_each_rcu - iterate over a rcu enabled hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_rcu(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_rcu(obj, node, &name[bkt], member) + +/** + * hash_for_each_safe - iterate over a hashtable safe against removal of + * hash entry + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member) + +/** + * hash_for_each_possible - iterate over all possible objects hashing to the + * same bucket + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible(name, obj, node, member, key) \ + hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_rcu - iterate over all possible objects hashing to the + * same bucket in an rcu enabled hashtable + * in a rcu enabled hashtable + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_rcu(name, obj, node, member, key) \ + hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_safe - iterate over all possible objects hashing to the + * same bucket safe against removals + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \ + hlist_for_each_entry_safe(obj, node, tmp, \ + &name[hash_min(key, HASH_BITS(name))], member) + + +#endif From 998f40b550f257e436485291802fa938e4cf580f Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 2 Nov 2012 18:00:56 -0400 Subject: [PATCH 162/174] NFS4: nfs4_opendata_access should return errno Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 091baab3eccf..5eec4429970c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1749,7 +1749,7 @@ static int nfs4_opendata_access(struct rpc_cred *cred, /* even though OPEN succeeded, access is denied. Close the file */ nfs4_close_state(state, fmode); - return -NFS4ERR_ACCESS; + return -EACCES; } /* From 2b674047bef23d49a7ca8ec32f4b9e4e12588621 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 28 Oct 2012 21:59:04 +0000 Subject: [PATCH 163/174] bnx2x: fix HW initialization using fw 7.8.x Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f23e8c022954..bd1fd3d87c24 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -6794,8 +6794,9 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, BLOCK_DORQ, init_phase); + bnx2x_init_block(bp, BLOCK_BRB1, init_phase); + if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) { - bnx2x_init_block(bp, BLOCK_BRB1, init_phase); if (IS_MF(bp)) low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246); From 57c10b61c84bfed68b1b317d6f507a392724b9c4 Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:00 +0000 Subject: [PATCH 164/174] drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Tested-by: Roland Stigge Tested-by: Alexandre Pereira da Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 53743f7a2ca9..af8b4142088c 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1524,6 +1524,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) pldat->dma_buff_base_p); free_irq(ndev->irq, ndev); iounmap(pldat->net_base); + mdiobus_unregister(pldat->mii_bus); mdiobus_free(pldat->mii_bus); clk_disable(pldat->clk); clk_put(pldat->clk); From aa731872f7d33dcb8b54dad0cfb82d4e4d195d7e Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 28 Oct 2012 06:12:01 +0000 Subject: [PATCH 165/174] drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // Signed-off-by: Peter Senna Tschudin Signed-off-by: David S. Miller --- drivers/net/phy/mdio-bitbang.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index daec9b05d168..6428fcbbdd4b 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,6 +234,7 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); + mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); From e3c98512780ae2cfb90be2152ab35294439bb7bb Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 29 Oct 2012 02:02:36 +0000 Subject: [PATCH 166/174] cxgb4: Fix unable to get UP event from the LLD If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: Jay Hernandez Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c1cde11b0c6d..0df1284df497 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3415,16 +3415,6 @@ static int adap_init0_config(struct adapter *adapter, int reset) "mismatch: [fini] csum=%#x, computed csum=%#x\n", finicsum, cfcsum); - /* - * If we're a pure NIC driver then disable all offloading facilities. - * This will allow the firmware to optimize aspects of the hardware - * configuration which will result in improved performance. - */ - caps_cmd.ofldcaps = 0; - caps_cmd.iscsicaps = 0; - caps_cmd.rdmacaps = 0; - caps_cmd.fcoecaps = 0; - /* * And now tell the firmware to use the configuration we just loaded. */ From 608f62b996c6e140ff7515abe75305aed4726b33 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Wed, 31 Oct 2012 17:46:10 +0900 Subject: [PATCH 167/174] thermal: solve compilation errors in rcar_thermal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit following were the errors reported drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’: drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default] include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’ drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’ include/linux/thermal.h:166:29: note: declared here make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1 make: *** [drivers/thermal/rcar_thermal.o] Error 2 with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Signed-off-by: Devendra Naga Signed-off-by: Kuninori Morimoto Signed-off-by: Zhang Rui --- drivers/thermal/rcar_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index d4452716aaab..f7a1b574a304 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -210,7 +210,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) goto error_free_priv; } - zone = thermal_zone_device_register("rcar_thermal", 0, priv, + zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv, &rcar_thermal_zone_ops, 0, 0); if (IS_ERR(zone)) { dev_err(&pdev->dev, "thermal zone device is NULL\n"); From fba4e087361605d1eed63343bb08811f097c83ee Mon Sep 17 00:00:00 2001 From: Igor Murzov Date: Sat, 13 Oct 2012 04:41:25 +0400 Subject: [PATCH 168/174] ACPI video: Ignore errors after _DOD evaluation. There are systems where video module known to work fine regardless of broken _DOD and ignoring returned value here doesn't cause any issues later. This should fix brightness controls on some laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47861 Signed-off-by: Igor Murzov Reviewed-by: Sergey V Signed-off-by: Zhang Rui --- drivers/acpi/video.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index f94d4c818fc7..0230cb6cbb3a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1345,12 +1345,15 @@ static int acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { - int status; + int status = 0; struct acpi_device *dev; - status = acpi_video_device_enumerate(video); - if (status) - return status; + /* + * There are systems where video module known to work fine regardless + * of broken _DOD and ignoring returned value here doesn't cause + * any issues later. + */ + acpi_video_device_enumerate(video); list_for_each_entry(dev, &device->children, node) { From 3ae53b1e13e1ca7928a3dd2d51ea5417b618560c Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Tue, 23 Oct 2012 14:54:42 +0800 Subject: [PATCH 169/174] exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. Signed-off-by: Jonghwan Choi Reviewed-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- drivers/thermal/exynos_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index fd03e8581afc..6dd29e4ce36b 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -815,7 +815,7 @@ static struct platform_device_id exynos_tmu_driver_ids[] = { }, { }, }; -MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids); +MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids); static inline struct exynos_tmu_platform_data *exynos_get_driver_data( struct platform_device *pdev) From 789336360e0a2aeb9750c16ab704a02cbe035e9e Mon Sep 17 00:00:00 2001 From: Tom Parkin Date: Mon, 29 Oct 2012 23:41:48 +0000 Subject: [PATCH 170/174] l2tp: fix oops in l2tp_eth_create() error path When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by: Tom Parkin Signed-off-by: David S. Miller --- net/l2tp/l2tp_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index 37b8b8ba31f7..76125c57ee6d 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -291,6 +291,7 @@ static int l2tp_eth_create(struct net *net, u32 tunnel_id, u32 session_id, u32 p out_del_dev: free_netdev(dev); + spriv->dev = NULL; out_del_session: l2tp_session_delete(session); out: From a4d7e485bca65bd516fced77b03f92419308df72 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 29 Oct 2012 07:30:49 +0000 Subject: [PATCH 171/174] vmxnet3: must split too big fragments vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: Eric Dumazet Reported-by: jongman heo Tested-by: jongman heo Cc: Shreyas Bhatewara Reviewed-by: Bhavesh Davda Signed-off-by: Shreyas Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 65 +++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 20 deletions(-) diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index ce9d4f2c9776..0ae1bcc6da73 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -744,28 +744,43 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + u32 buf_size; - tbi = tq->buf_info + tq->tx_ring.next2fill; - tbi->map_type = VMXNET3_MAP_PAGE; - tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, - 0, skb_frag_size(frag), - DMA_TO_DEVICE); + buf_offset = 0; + len = skb_frag_size(frag); + while (len) { + tbi = tq->buf_info + tq->tx_ring.next2fill; + if (len < VMXNET3_MAX_TX_BUF_SIZE) { + buf_size = len; + dw2 |= len; + } else { + buf_size = VMXNET3_MAX_TX_BUF_SIZE; + /* spec says that for TxDesc.len, 0 == 2^14 */ + } + tbi->map_type = VMXNET3_MAP_PAGE; + tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag, + buf_offset, buf_size, + DMA_TO_DEVICE); - tbi->len = skb_frag_size(frag); + tbi->len = buf_size; - gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; - BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); + gdesc = tq->tx_ring.base + tq->tx_ring.next2fill; + BUG_ON(gdesc->txd.gen == tq->tx_ring.gen); - gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); - gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag)); - gdesc->dword[3] = 0; + gdesc->txd.addr = cpu_to_le64(tbi->dma_addr); + gdesc->dword[2] = cpu_to_le32(dw2); + gdesc->dword[3] = 0; - dev_dbg(&adapter->netdev->dev, - "txd[%u]: 0x%llu %u %u\n", - tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), - le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); - vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); - dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", + tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr), + le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]); + vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); + dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT; + + len -= buf_size; + buf_offset += buf_size; + } } ctx->eop_txd = gdesc; @@ -886,6 +901,18 @@ vmxnet3_prepare_tso(struct sk_buff *skb, } } +static int txd_estimate(const struct sk_buff *skb) +{ + int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1; + int i; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + + count += VMXNET3_TXD_NEEDED(skb_frag_size(frag)); + } + return count; +} /* * Transmits a pkt thru a given tq @@ -914,9 +941,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, union Vmxnet3_GenericDesc tempTxDesc; #endif - /* conservatively estimate # of descriptors to use */ - count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + - skb_shinfo(skb)->nr_frags + 1; + count = txd_estimate(skb); ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP)); From c454e6111d1ef4268fe98e87087216e51c2718c3 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 29 Oct 2012 05:05:33 +0000 Subject: [PATCH 172/174] tcp-repair: Handle zero-length data put in rcv queue When sending data into a tcp socket in repair state we should check for the amount of data being 0 explicitly. Otherwise we'll have an skb with seq == end_seq in rcv queue, but tcp doesn't expect this to happen (in particular a warn_on in tcp_recvmsg shoots). Signed-off-by: Pavel Emelyanov Reported-by: Giorgos Mavrikas Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 1db663983587..2c2b13a999ea 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4529,6 +4529,9 @@ int tcp_send_rcvq(struct sock *sk, struct msghdr *msg, size_t size) struct tcphdr *th; bool fragstolen; + if (size == 0) + return 0; + skb = alloc_skb(size + sizeof(*th), sk->sk_allocation); if (!skb) goto err; From 3d70f8c617a436c7146ecb81df2265b4626dfe89 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Nov 2012 11:07:39 -0800 Subject: [PATCH 173/174] Linux 3.7-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 42d0e56818ea..a1ccf225c4e9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Terrified Chipmunk # *DOCUMENTATION* From e47a682ace0cd56eb8e09b806c2b0f034b491520 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Tue, 6 Nov 2012 14:30:19 +0530 Subject: [PATCH 174/174] spi: omap2-mcspi: Reorder the wait_for_completion for tx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit d7b4394e[Cleanup the omap2_mcspi_txrx_dma function] changed the wait_for_completion order. Move the wait so that the rx doesnot wait for the tx to complete. Reported-and-tested-by: Sørensen, Stefan Signed-off-by: Shubhrajyoti D Signed-off-by: Mark Brown --- drivers/spi/spi-omap2-mcspi.c | 37 +++++++++++++++++------------------ 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 3542fdc664b1..b1a651ef9579 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -323,18 +323,13 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi, struct omap2_mcspi *mcspi; struct omap2_mcspi_dma *mcspi_dma; unsigned int count; - u8 * rx; const u8 * tx; - void __iomem *chstat_reg; - struct omap2_mcspi_cs *cs = spi->controller_state; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; count = xfer->len; - rx = xfer->rx_buf; tx = xfer->tx_buf; - chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; if (mcspi_dma->dma_tx) { struct dma_async_tx_descriptor *tx; @@ -359,19 +354,6 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi, dma_async_issue_pending(mcspi_dma->dma_tx); omap2_mcspi_set_dma_req(spi, 0, 1); - wait_for_completion(&mcspi_dma->dma_tx_completion); - dma_unmap_single(mcspi->dev, xfer->tx_dma, count, - DMA_TO_DEVICE); - - /* for TX_ONLY mode, be sure all words have shifted out */ - if (rx == NULL) { - if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_TXS) < 0) - dev_err(&spi->dev, "TXS timed out\n"); - else if (mcspi_wait_for_reg_bit(chstat_reg, - OMAP2_MCSPI_CHSTAT_EOT) < 0) - dev_err(&spi->dev, "EOT timed out\n"); - } } static unsigned @@ -492,6 +474,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) struct dma_slave_config cfg; enum dma_slave_buswidth width; unsigned es; + void __iomem *chstat_reg; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; @@ -526,8 +509,24 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) omap2_mcspi_tx_dma(spi, xfer, cfg); if (rx != NULL) - return omap2_mcspi_rx_dma(spi, xfer, cfg, es); + count = omap2_mcspi_rx_dma(spi, xfer, cfg, es); + if (tx != NULL) { + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + wait_for_completion(&mcspi_dma->dma_tx_completion); + dma_unmap_single(mcspi->dev, xfer->tx_dma, xfer->len, + DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } + } return count; }