renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
Code

fpga: Add support for Xilinx DFX AXI Shutdown manager

Browse Source 
This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
shutdown manager IP. It can be used to safely handling the AXI traffic
on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
and there by preventing system deadlock that may occur if AXI transactions
are interrupted during reconfiguration.

PR-Decoupler and AXI shutdown manager are completely different IPs.
But both the IP registers are compatible and also both belong to the
same sub-system (fpga-bridge).So using same driver for both IP's.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
This commit is contained in:
Nava kishore Manne 2021-02-11 10:41:48 +05:30 committed by Moritz Fischer
parent 71c3980b8c
commit 6f1e376cfc
2 changed files with 40 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/fpga/Kconfig
View File

@ -118,10 +118,17 @@ config XILINX_PR_DECOUPLER
depends on FPGA_BRIDGE
depends on HAS_IOMEM
help
Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
or Xilinx Dynamic Function eXchnage AIX Shutdown Manager.
The PR Decoupler exists in the FPGA fabric to isolate one
region of the FPGA from the busses while that region is
being reprogrammed during partial reconfig.
The Dynamic Function eXchange AXI shutdown manager prevents
AXI traffic from passing through the bridge. The controller
safely handles AXI4MM and AXI4-Lite interfaces on a
Reconfigurable Partition when it is undergoing dynamic
reconfiguration, preventing the system deadlock that can
occur if AXI transactions are interrupted by DFX.
config FPGA_REGION
tristate "FPGA Region"

37
drivers/fpga/xilinx-pr-decoupler.c
View File

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2017, National Instruments Corp.
* Copyright (c) 2017, Xilix Inc
* Copyright (c) 2017, Xilinx Inc
*
* FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
* Decoupler IP Core.
@ -18,7 +18,12 @@
#define CTRL_CMD_COUPLE 0
#define CTRL_OFFSET 0
struct xlnx_config_data {
const char *name;
};
struct xlnx_pr_decoupler_data {
const struct xlnx_config_data *ipconfig;
void __iomem *io_base;
struct clk *clk;
};
@ -76,15 +81,28 @@ static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
.enable_show = xlnx_pr_decoupler_enable_show,
};
static const struct xlnx_config_data decoupler_config = {
.name = "Xilinx PR Decoupler",
};
static const struct xlnx_config_data shutdown_config = {
.name = "Xilinx DFX AXI Shutdown Manager",
};
static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
{ .compatible = "xlnx,pr-decoupler-1.00", },
{ .compatible = "xlnx,pr-decoupler", },
{ .compatible = "xlnx,pr-decoupler-1.00", .data = &decoupler_config },
{ .compatible = "xlnx,pr-decoupler", .data = &decoupler_config },
{ .compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
.data = &shutdown_config },
{ .compatible = "xlnx,dfx-axi-shutdown-manager",
.data = &shutdown_config },
{},
};
MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct xlnx_pr_decoupler_data *priv;
struct fpga_bridge *br;
int err;
@ -94,6 +112,14 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
if (np) {
const struct of_device_id *match;
match = of_match_node(xlnx_pr_decoupler_of_match, np);
if (match && match->data)
priv->ipconfig = match->data;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->io_base))
@ -112,7 +138,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
clk_disable(priv->clk);
br = devm_fpga_bridge_create(&pdev->dev, "Xilinx PR Decoupler",
br = devm_fpga_bridge_create(&pdev->dev, priv->ipconfig->name,
&xlnx_pr_decoupler_br_ops, priv);
if (!br) {
err = -ENOMEM;
@ -123,7 +149,8 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
err = fpga_bridge_register(br);
if (err) {
dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
dev_err(&pdev->dev, "unable to register %s",
priv->ipconfig->name);
goto err_clk;
}